diff options
author | sijanec <anton@sijanec.eu> | 2021-04-19 19:33:46 +0200 |
---|---|---|
committer | sijanec <anton@sijanec.eu> | 2021-04-19 19:33:46 +0200 |
commit | c595f9d413cde6d0720fa3133e82f6c8c940df8d (patch) | |
tree | 41713c0c867fc88b0bd73f6ab7c9aed0537daa78 /fiz/naloga | |
parent | popravljena naloga fiz 2 (diff) | |
download | sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.tar sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.tar.gz sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.tar.bz2 sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.tar.lz sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.tar.xz sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.tar.zst sola-gimb-2-c595f9d413cde6d0720fa3133e82f6c8c940df8d.zip |
Diffstat (limited to 'fiz/naloga')
-rw-r--r-- | fiz/naloga/tekst/dokument.aux | 8 | ||||
-rw-r--r-- | fiz/naloga/tekst/dokument.blg | 24 | ||||
-rw-r--r-- | fiz/naloga/tekst/dokument.log | 80 | ||||
-rw-r--r-- | fiz/naloga/tekst/dokument.out | 2 | ||||
-rw-r--r-- | fiz/naloga/tekst/dokument.pdf | bin | 1277395 -> 1277480 bytes | |||
-rw-r--r-- | fiz/naloga/tekst/dokument.synctex.gz | bin | 62669 -> 62904 bytes | |||
-rw-r--r-- | fiz/naloga/tekst/dokument.tex | 31 | ||||
-rw-r--r-- | fiz/naloga/tekst/dokument.toc | 8 | ||||
-rw-r--r-- | fiz/naloga/tekst/stderr.log | 10 | ||||
-rw-r--r-- | fiz/naloga/tekst/stdout.log | 538 |
10 files changed, 541 insertions, 160 deletions
diff --git a/fiz/naloga/tekst/dokument.aux b/fiz/naloga/tekst/dokument.aux index 289a92d..6e85c3a 100644 --- a/fiz/naloga/tekst/dokument.aux +++ b/fiz/naloga/tekst/dokument.aux @@ -45,19 +45,18 @@ \@writefile{lof}{\contentsline {figure}{\numberline {4}{\ignorespaces Kaj je merilnik tlaka (to sicer ni moj merilnik tlaka)}}{3}{figure.4}\protected@file@percent } \@writefile{toc}{\contentsline {subsubsection}{\numberline {3.1.3}Videokamera in program Tracker}{3}{subsubsection.3.1.3}\protected@file@percent } \@writefile{lof}{\contentsline {figure}{\numberline {5}{\ignorespaces Kaj je Tracker (predvaja se Trackerju priložen posnetek)}}{3}{figure.5}\protected@file@percent } -\@writefile{toc}{\contentsline {subsubsection}{\numberline {3.1.4}ESP8266 ESP-12E NodeMCU}{3}{subsubsection.3.1.4}\protected@file@percent } +\@writefile{toc}{\contentsline {subsubsection}{\numberline {3.1.4}ESP8266 ESP-12E NodeMCU}{4}{subsubsection.3.1.4}\protected@file@percent } \@writefile{lof}{\contentsline {figure}{\numberline {6}{\ignorespaces Kaj je ESP8266 ESP-12E NodeMCU}}{4}{figure.6}\protected@file@percent } \@writefile{toc}{\contentsline {subsubsection}{\numberline {3.1.5}Navoji, plastenke in plastični adapterji}{4}{subsubsection.3.1.5}\protected@file@percent } \@writefile{toc}{\contentsline {subsubsection}{\numberline {3.1.6}Vzletna rampa}{4}{subsubsection.3.1.6}\protected@file@percent } \@writefile{toc}{\contentsline {subsection}{\numberline {3.2}Merjene količine}{4}{subsection.3.2}\protected@file@percent } \@writefile{toc}{\contentsline {subsection}{\numberline {3.3}Konstante}{4}{subsection.3.3}\protected@file@percent } \@writefile{toc}{\contentsline {section}{\numberline {4}Obseg spreminjanja neodvisne količine}{4}{section.4}\protected@file@percent } -\@writefile{toc}{\contentsline {section}{\numberline {5}Grafi, s katerimi bodo meritve predstavljene}{4}{section.5}\protected@file@percent } \abx@aux@nociteall +\@writefile{toc}{\contentsline {section}{\numberline {5}Grafi, s katerimi bodo meritve predstavljene}{5}{section.5}\protected@file@percent } \@writefile{toc}{\contentsline {section}{\numberline {6}Opis teoretičnega modela}{5}{section.6}\protected@file@percent } -\@writefile{toc}{\contentsline {subsubsection}{\numberline {6.0.1}Hipoteze oziroma predvidevanja}{5}{subsubsection.6.0.1}\protected@file@percent } +\@writefile{toc}{\contentsline {subsection}{\numberline {6.1}Hipoteze oziroma predvidevanja}{5}{subsection.6.1}\protected@file@percent } \@writefile{toc}{\contentsline {section}{\numberline {7}Licence slik}{5}{section.7}\protected@file@percent } -\@writefile{toc}{\contentsline {section}{\numberline {8}Zaključek}{5}{section.8}\protected@file@percent } \exsheets@sum@of@points {0} \exsheets@sum@of@bonus {0} \gdef \numberofquestions {0} @@ -68,4 +67,5 @@ \abx@aux@defaultrefcontext{0}{calc}{nty/global//global/global} \abx@aux@defaultrefcontext{0}{acwr}{nty/global//global/global} \abx@aux@defaultrefcontext{0}{eqs}{nty/global//global/global} +\@writefile{toc}{\contentsline {section}{\numberline {8}Zaključek}{6}{section.8}\protected@file@percent } \gdef \@abspage@last{6} diff --git a/fiz/naloga/tekst/dokument.blg b/fiz/naloga/tekst/dokument.blg index 1a1b3fb..4c5ab32 100644 --- a/fiz/naloga/tekst/dokument.blg +++ b/fiz/naloga/tekst/dokument.blg @@ -1,14 +1,14 @@ [0] Config.pm:311> INFO - This is Biber 2.16 [1] Config.pm:314> INFO - Logfile is 'dokument.blg' -[155] biber:340> INFO - === ned apr 18, 2021, 23:21:30 -[179] Biber.pm:415> INFO - Reading 'dokument.bcf' -[318] Biber.pm:949> INFO - Using all citekeys in bib section 0 -[352] Biber.pm:4340> INFO - Processing section 0 -[379] Biber.pm:4531> INFO - Looking for bibtex format file 'dokument.bib' for section 0 -[381] bibtex.pm:1689> INFO - LaTeX decoding ... -[390] bibtex.pm:1494> INFO - Found BibTeX data source 'dokument.bib' -[483] UCollate.pm:68> INFO - Overriding locale 'sl-SI' defaults 'normalization = NFD' with 'normalization = prenormalized' -[483] UCollate.pm:68> INFO - Overriding locale 'sl-SI' defaults 'variable = shifted' with 'variable = non-ignorable' -[484] Biber.pm:4168> INFO - Sorting list 'nty/global//global/global' of type 'entry' with template 'nty' and locale 'sl-SI' -[500] bbl.pm:654> INFO - Writing 'dokument.bbl' with encoding 'UTF-8' -[502] bbl.pm:757> INFO - Output to dokument.bbl +[163] biber:340> INFO - === pon apr 19, 2021, 19:32:50 +[198] Biber.pm:415> INFO - Reading 'dokument.bcf' +[336] Biber.pm:949> INFO - Using all citekeys in bib section 0 +[367] Biber.pm:4340> INFO - Processing section 0 +[388] Biber.pm:4531> INFO - Looking for bibtex format file 'dokument.bib' for section 0 +[389] bibtex.pm:1689> INFO - LaTeX decoding ... +[398] bibtex.pm:1494> INFO - Found BibTeX data source 'dokument.bib' +[487] UCollate.pm:68> INFO - Overriding locale 'sl-SI' defaults 'normalization = NFD' with 'normalization = prenormalized' +[488] UCollate.pm:68> INFO - Overriding locale 'sl-SI' defaults 'variable = shifted' with 'variable = non-ignorable' +[488] Biber.pm:4168> INFO - Sorting list 'nty/global//global/global' of type 'entry' with template 'nty' and locale 'sl-SI' +[504] bbl.pm:654> INFO - Writing 'dokument.bbl' with encoding 'UTF-8' +[507] bbl.pm:757> INFO - Output to dokument.bbl diff --git a/fiz/naloga/tekst/dokument.log b/fiz/naloga/tekst/dokument.log index d844948..66da92d 100644 --- a/fiz/naloga/tekst/dokument.log +++ b/fiz/naloga/tekst/dokument.log @@ -1,4 +1,4 @@ -This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020) (preloaded format=pdflatex 2021.3.23) 18 APR 2021 23:21 +This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020) (preloaded format=pdflatex 2021.3.23) 19 APR 2021 19:32 entering extended mode \write18 enabled. %&-line parsing enabled. @@ -2029,10 +2029,10 @@ Overfull \hbox (5.0pt too wide) in paragraph at lines 159--160 <img-tracked/rampa.jpg, id=146, 3468.96pt x 2312.64pt> File: img-tracked/rampa.jpg Graphic file (type jpg) <use img-tracked/rampa.jpg> -Package pdftex.def Info: img-tracked/rampa.jpg used on input line 179. +Package pdftex.def Info: img-tracked/rampa.jpg used on input line 180. (pdftex.def) Requested size: 252.94499pt x 168.60606pt. -Overfull \hbox (5.0pt too wide) in paragraph at lines 179--180 +Overfull \hbox (5.0pt too wide) in paragraph at lines 180--181 [][] [] @@ -2040,60 +2040,62 @@ Overfull \hbox (5.0pt too wide) in paragraph at lines 179--180 has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.186 \subsubsection +l.187 \subsubsection {HX711 ADC in vaga}pdfTeX warning (ext4): destination with the same identifier (name{figure.2}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.186 \subsubsection +l.187 \subsubsection {HX711 ADC in vaga} <./img-tracked/navoji.jpg> <./img-track ed/rampa.jpg>] <img/loadcell.jpg, id=160, 5203.44pt x 3468.96pt> File: img/loadcell.jpg Graphic file (type jpg) <use img/loadcell.jpg> -Package pdftex.def Info: img/loadcell.jpg used on input line 190. +Package pdftex.def Info: img/loadcell.jpg used on input line 191. (pdftex.def) Requested size: 202.3529pt x 134.87073pt. <img/pressure.jpg, id=161, 391.4625pt x 501.875pt> File: img/pressure.jpg Graphic file (type jpg) <use img/pressure.jpg> -Package pdftex.def Info: img/pressure.jpg used on input line 209. -(pdftex.def) Requested size: 101.17645pt x 129.71095pt. +Package pdftex.def Info: img/pressure.jpg used on input line 210. +(pdftex.def) Requested size: 126.47249pt x 162.14253pt. <img-tracked/tracker.png, id=162, 1604.99625pt x 902.37125pt> File: img-tracked/tracker.png Graphic file (type png) <use img-tracked/tracker.png> -Package pdftex.def Info: img-tracked/tracker.png used on input line 217. +Package pdftex.def Info: img-tracked/tracker.png used on input line 218. (pdftex.def) Requested size: 252.94499pt x 142.20683pt. -Overfull \hbox (5.0pt too wide) in paragraph at lines 217--218 +Overfull \hbox (5.0pt too wide) in paragraph at lines 218--219 [][] [] + +Overfull \vbox (10.01083pt too high) has occurred while \output is active [] + + [3pdfTeX warning (ext4): destination with the same identifier (name{figure.3}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.228 T - ako kot v prejšnji projektni nalogi bom tukaj kot procesor za meril... -pdfTeX warning (ext4): destination with the same identifier (name{figure.4}) ha -s been already used, duplicate ignored +l.226 \end{multicols} + pdfTeX warning (ext4): destination with the same identifie +r (name{figure.4}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.228 T - ako kot v prejšnji projektni nalogi bom tukaj kot procesor za meril... -pdfTeX warning (ext4): destination with the same identifier (name{figure.5}) ha -s been already used, duplicate ignored +l.226 \end{multicols} + pdfTeX warning (ext4): destination with the same identifie +r (name{figure.5}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.228 T - ako kot v prejšnji projektni nalogi bom tukaj kot procesor za meril... - <./img/loadcell.jpg> <./img/pressure.jpg> <./img-tracked/tracker.png>] +l.226 \end{multicols} + <./img/loadcell.jpg> <./img/pressure.jpg> <./img-tracked/ +tracker.png>] <img/esp8266.jpg, id=170, 2197.20876pt x 1524.69624pt> File: img/esp8266.jpg Graphic file (type jpg) <use img/esp8266.jpg> -Package pdftex.def Info: img/esp8266.jpg used on input line 236. +Package pdftex.def Info: img/esp8266.jpg used on input line 237. (pdftex.def) Requested size: 252.94499pt x 175.51086pt. -Overfull \hbox (5.0pt too wide) in paragraph at lines 236--237 +Overfull \hbox (5.0pt too wide) in paragraph at lines 237--238 [][] [] @@ -2101,30 +2103,20 @@ Overfull \hbox (5.0pt too wide) in paragraph at lines 236--237 has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.270 \item U +l.271 \item U poštevali bomo dve glavni sili na raketo kot sistem, silo te... <./img/esp8266.jpg>] -Overfull \hbox (55.24744pt too wide) in paragraph at lines 277--278 -[]$\OML/cmm/m/it/10 p[]$ \OT1/cmr/m/n/10 je delta ozi-roma raz-lika med tla-kom - v pla-stenki in $\OML/cmm/m/it/10 p[]$ \OT1/cmr/m/n/10 ozi-roma tla-kom oko-li -ce ob da-nem ^^Tcasu/volumnu/pritisku/potisku/.... - [] - - -Package hyperref Warning: Difference (2) between bookmark levels is greater -(hyperref) than one, level fixed on input line 278. - LaTeX Font Info: Font shape `U/ccicons/m/n' will be -(Font) scaled to size 10.0pt on input line 286. -[5] [6] +(Font) scaled to size 10.0pt on input line 287. + [5] [6] -! LaTeX Error: \begin{itemize} on input line 268 ended by \end{document}. +! LaTeX Error: \begin{itemize} on input line 269 ended by \end{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H <return> for immediate help. ... -l.312 \end{document} +l.313 \end{document} Your command was ignored. Type I <command> <return> to replace it with another command, @@ -2132,23 +2124,23 @@ or <return> to continue without it. (./dokument.aux) Package rerunfilecheck Info: File `dokument.out' has not changed. -(rerunfilecheck) Checksum: 64AB1C3D1BA74C4F85CDC56A4C697E3D;3171. +(rerunfilecheck) Checksum: 8EBB2C01DFCC5EB58BF7414672EFB334;3166. Package logreq Info: Writing requests to 'dokument.run.xml'. \openout1 = `dokument.run.xml'. ) (\end occurred inside a group at level 1) -### semi simple group (level 1) entered at line 268 (\begingroup) +### semi simple group (level 1) entered at line 269 (\begingroup) ### bottom level Here is how much of TeX's memory you used: 53570 strings out of 479014 - 1210438 string characters out of 5859133 - 2125331 words of memory out of 5000000 + 1210428 string characters out of 5859133 + 2121331 words of memory out of 5000000 69981 multiletter control sequences out of 15000+600000 417877 words of font info for 83 fonts, out of 8000000 for 9000 1141 hyphenation exceptions out of 8191 - 102i,15n,111p,1133b,1836s stack positions out of 5000i,500n,10000p,200000b,80000s + 102i,15n,111p,1133b,1838s stack positions out of 5000i,500n,10000p,200000b,80000s {/usr/local/texlive/2020/texmf-dist/fonts/enc/dvips/cm-super/cm -super-ts1.enc}</usr/local/texlive/2020/texmf-dist/fonts/type1/public/ccicons/c cicons.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/c @@ -2170,7 +2162,7 @@ ive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmti9.pfb></usr/local/texliv e/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmtt10.pfb></usr/local/texlive /2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmtt8.pfb></usr/local/texlive/2 020/texmf-dist/fonts/type1/public/cm-super/sfrm1000.pfb> -Output written on dokument.pdf (6 pages, 7708343 bytes). +Output written on dokument.pdf (6 pages, 7708653 bytes). PDF statistics: 302 PDF objects out of 1000 (max. 8388607) 249 compressed objects within 3 object streams diff --git a/fiz/naloga/tekst/dokument.out b/fiz/naloga/tekst/dokument.out index 27fa959..d875d39 100644 --- a/fiz/naloga/tekst/dokument.out +++ b/fiz/naloga/tekst/dokument.out @@ -14,6 +14,6 @@ \BOOKMARK [1][-]{section.4}{\376\377\000O\000b\000s\000e\000g\000\040\000s\000p\000r\000e\000m\000i\000n\000j\000a\000n\000j\000a\000\040\000n\000e\000o\000d\000v\000i\000s\000n\000e\000\040\000k\000o\000l\000i\001\015\000i\000n\000e}{}% 14 \BOOKMARK [1][-]{section.5}{\376\377\000G\000r\000a\000f\000i\000,\000\040\000s\000\040\000k\000a\000t\000e\000r\000i\000m\000i\000\040\000b\000o\000d\000o\000\040\000m\000e\000r\000i\000t\000v\000e\000\040\000p\000r\000e\000d\000s\000t\000a\000v\000l\000j\000e\000n\000e}{}% 15 \BOOKMARK [1][-]{section.6}{\376\377\000O\000p\000i\000s\000\040\000t\000e\000o\000r\000e\000t\000i\001\015\000n\000e\000g\000a\000\040\000m\000o\000d\000e\000l\000a}{}% 16 -\BOOKMARK [2][-]{subsubsection.6.0.1}{\376\377\000H\000i\000p\000o\000t\000e\000z\000e\000\040\000o\000z\000i\000r\000o\000m\000a\000\040\000p\000r\000e\000d\000v\000i\000d\000e\000v\000a\000n\000j\000a}{section.6}% 17 +\BOOKMARK [2][-]{subsection.6.1}{\376\377\000H\000i\000p\000o\000t\000e\000z\000e\000\040\000o\000z\000i\000r\000o\000m\000a\000\040\000p\000r\000e\000d\000v\000i\000d\000e\000v\000a\000n\000j\000a}{section.6}% 17 \BOOKMARK [1][-]{section.7}{\376\377\000L\000i\000c\000e\000n\000c\000e\000\040\000s\000l\000i\000k}{}% 18 \BOOKMARK [1][-]{section.8}{\376\377\000Z\000a\000k\000l\000j\000u\001\015\000e\000k}{}% 19 diff --git a/fiz/naloga/tekst/dokument.pdf b/fiz/naloga/tekst/dokument.pdf Binary files differindex 7996a48..bd4cac4 100644 --- a/fiz/naloga/tekst/dokument.pdf +++ b/fiz/naloga/tekst/dokument.pdf diff --git a/fiz/naloga/tekst/dokument.synctex.gz b/fiz/naloga/tekst/dokument.synctex.gz Binary files differindex 43836e9..e264430 100644 --- a/fiz/naloga/tekst/dokument.synctex.gz +++ b/fiz/naloga/tekst/dokument.synctex.gz diff --git a/fiz/naloga/tekst/dokument.tex b/fiz/naloga/tekst/dokument.tex index 94f58df..af3ad61 100644 --- a/fiz/naloga/tekst/dokument.tex +++ b/fiz/naloga/tekst/dokument.tex @@ -136,18 +136,18 @@ \begin{document} \maketitle \begin{abstract} -Ta dokument opisuje izvedbo in pripravo na projektno nalogo \textit{Potisna sila vodne rakete}. Opis vključuje teoretični del merjenja potiska in fizikalne koncepte +Ta dokument opisuje izvedbo in pripravo na projektno nalogo \textit{Potisna sila vodne rakete}. Opis vključuje teoretični del merjenja potiska in fizikalne koncepte. \end{abstract} \paragraph{Navodilo naloge} Izmeri potisno silo vode, ki izteka iz vodne rakete, ki je fiksno vpeta. Med poskusom meri tudi tlak v plastenki in višino vode v plastenki in izmerjene vrednosti primerjaj s teoretično napovedjo. \tableofcontents \section{Slovar pojmov} \begin{itemize} - \item \textbf{ADC}: Pretvornik iz analognega v digitalni signal (angleško \textit{analog to digital converter}) + \item \textbf{ADC}: Pretvornik iz analognega v digitalni signal (angleško \textit{analog to digital converter}). \end{itemize} \section{Uvod} -V mojem projektu \textit{\snovdn}merim potisno silo oziroma potisk vode, ki izteka iz vodne rakete in s tem raketo potiska navzgor. Merim tudi zračni tlak v plastenki in višino vode medtem ko je plastenka fiksno vpeta. Teoretične vrednosti primerjam z dejanskimi izmerjenimi in povem, kaj vpliva na lastnosti leta. +V svojem projektu \textit{\snovdn}merim potisno silo oziroma potisk vode, ki izteka iz vodne rakete in s tem raketo potiska navzgor. Merim tudi zračni tlak v plastenki in višino vode medtem ko je plastenka fiksno vpeta. Teoretične vrednosti primerjam z dejanskimi izmerjenimi in povem, kaj vpliva na lastnosti leta. \subsection{Opis poskusa} -Ker iztek vode poteče zelo hitro, podatkov ni moč odčitavati na roke. V ta namen bom uporabil izvajal strojno, in sicer: +Ker iztek vode poteče zelo hitro, podatkov ni moč odčitavati na roke. V ta namen bom meritve izvajal strojno, in sicer takole: \begin{itemize} \item \textbf{Potisna sila oziroma potisk}: \SI{5}{\kilo\gram} analogna vaga in HX711 \SI[parse-numbers=false]{10/80}{\hertz} 24-bitni ADC \item \textbf{Višina vode v plastenki}: Videoanaliza s programom Tracker in s kamero s \SI{60}{\hertz} @@ -163,14 +163,15 @@ Ker iztek vode poteče zelo hitro, podatkov ni moč odčitavati na roke. V ta na \vfill\null\columnbreak Na nosilec bom vertikalno namestil plastenko z vsemi povezanimi senzorji. Seveda bi bilo lažje montirati horizontalno, kakor se ponavadi meri potiske motorjev raket, vendar bi nas pri tem motilo to, da bi vsa masa, ki bi jo potiskali iz plastenke, torej voda, \textit{padla} na dno plastenke, pod ventil, in ne bi iztekla. - Raketa je torej monitrana vertikalno, pritrjena na silomeru. Ob napolnitvi rakete z ustrezno količino vode začnemo z zračnim kompresorjem za polnjenje avtomobilskih gum do željene vrednosti polniti plastenko z zrakom. Po tem kompresor odstranimo in s pripravljenim mehanizmom gardena\footnote{Gardena je blagovna znamka podjetja, ki se ukvarja s priključki za zalivalne cevi in amatersko vodno napeljavo, vendar tukaj ni mišljeno kot blagovna znamka, temveč kot oblika priključka.} priključek odklopimo iz rampe rakete, da voda potisne raketo navzgor. Sinhroniziramo meritve in jih shranimo v tabelo. + + Raketa je torej monitrana vertikalno, pritrjena na silomeru, ki je na njeni konici. Ob napolnitvi rakete z ustrezno količino vode začnemo z zračnim kompresorjem za polnjenje avtomobilskih zračnic do željene vrednosti polniti plastenko z zrakom. Po tem kompresor odstranimo in s pripravljenim mehanizmom gardena\footnote{Gardena je blagovna znamka podjetja, ki se ukvarja s priključki za zalivalne cevi in amatersko vodno napeljavo, vendar tukaj ni mišljeno kot blagovna znamka, temveč kot oblika priključka.} priključek odklopimo iz rampe rakete, da voda potisne raketo navzgor. Sinhroniziramo meritve in jih shranimo v tabelo. Za pridobitev dejanske sile potiska moramo surovim meritvam vage prišteti še gravitacijsko silo po formuli $m\cdot g$, kjer je $m$ masa plastenke v danem trenutku. Maso lahko izračunamo, saj nam je tara, torej masa plastenke in ostalih priprav, znana, odšteti moramo samo še gravitacijsko silo na vodo v plastenki, ki jo izvemo iz videoanalize. \end{multicols} \begin{multicols}{2} - Namesto dejanske rakete bom uporabil plastenko, ker itak zračni upor zanemarimo --- raketa bo fiksno vpeta. Za izstrelitev bom vseeno uporabil vzletno rampo za vodne rakete, ker jo itak že imam. Deluje tako, da na raketo, ki ima navaden \SI{22}{\milli\meter} navoj PET plastenke, pritrdimo adapter, ki ima na eni strani ženski navoj plastenke, na drugi pa moški gardena priključek, nato pa gardena priključek zahakljamo v namensko pripravo, ki nam omogoča hkratno polnjenje z zrakom iz kompresorja in sunkovit odklop. Priprava ima standardni avtomobilski ventilček. + Namesto dejanske rakete bom uporabil plastenko, ker itak zračni upor zanemarimo --- raketa bo fiksno vpeta. Za izstrelitev bom vseeno uporabil vzletno rampo za vodne rakete, ker jo itak že imam. Deluje tako, da na raketo, ki ima navaden \SI{22}{\milli\meter} navoj PET za plastenke, pritrdimo adapter, ki ima na eni strani ženski navoj plastenke, na drugi pa moški gardena priključek, nato pa gardena priključek zahakljamo v namensko pripravo, ki nam omogoča hkratno polnjenje z zrakom iz kompresorja in sunkovit odklop. Priprava ima standardni avtomobilski ventilček. - Za merjenje tlaka v plastenki bi lahko v plastenko zvrtal luknjo in namestil medeninasti navoj, ki bi ga prilepil z močnim lepilom, odpornim na vodo, recimo s sikafleksom\footnote{Sikafleks je blagovna znamka podjetja, ki se ukvarja z vodoodpornimi industrijskimi lepili, vendar tukaj ni mišljeno kot blakovna znamka, temveč kot tip lepila.}. Ker to morebiti ne bi zdržalo večjih tlakov, bi bila alternativna rešitev uporaba vodovodarskega T-adapterja, na katerega bi na eno \textit{roko} privili plastenko, na \textit{nogo} merilnik tlaka, na drugi \textit{roki} pa bi imeli gardena priključek. Tak T-adapter bi bilo zelo težko najti, najlažja metoda bi bila 3D-tisk. + Za merjenje tlaka v plastenki bi lahko v plastenko zvrtal luknjo in namestil medeninast navoj, ki bi ga prilepil z močnim lepilom, odpornim na vodo, recimo s sikafleksom\footnote{Sikafleks je blagovna znamka podjetja, ki se ukvarja z vodoodpornimi industrijskimi lepili, vendar tukaj ni mišljeno kot blagovna znamka, temveč kot tip lepila.}. Ker to morebiti ne bi zdržalo večjih tlakov, bi bila alternativna rešitev uporaba vodovodarskega T-adapterja, na katerega bi na eno \textit{roko} privil plastenko, na \textit{nogo} merilnik tlaka, na drugi \textit{roki} pa bi imel gardena priključek. Tak T-adapter bi bilo zelo težko najti, najlažja metoda bi bila 3D-tisk. \vfill\null\columnbreak @@ -206,7 +207,7 @@ Dokumentacija teh merilnikov in programov, kakor sem jo uspel najti, je povezana \begin{figure}[H] \centering - \includegraphics[width=0.2\textwidth]{img/pressure.jpg} + \includegraphics[width=0.25\textwidth]{img/pressure.jpg} \caption{Kaj je merilnik tlaka (to sicer ni moj merilnik tlaka)} \end{figure} \end{multicols} @@ -255,7 +256,7 @@ Rampa bo služila kot stojalo za raketo. \item Gostota zraka \item Zunanji tlak \item Presek vodnega toka - \item Celoten volument plastenke + \item Celoten volumen plastenke \end{itemize} \section{Obseg spreminjanja neodvisne količine} \begin{itemize} @@ -266,18 +267,18 @@ Rampa bo služila kot stojalo za raketo. Za vsako kombinacijo sprememb neodvisnih količin bom prikazal potisk, pritisk in volumen vode v odvisnosti od časa. \section{Opis teoretičnega modela} \begin{itemize} - \item Zračni upor zanemarimo, ker je rakete fiksno vpeta in ne leti. + \item Zračni upor zanemarimo, ker je raketa fiksno vpeta in ne leti. \item Upoštevali bomo dve glavni sili na raketo kot sistem, silo teže ($F_g$) in silo potiska vsled odriva vode/mase ($F_\alpha$). Masa rakete brez vode je konstantno $m_0$, vendar je pri računanju sile teže treba upoštevati, da je med letom vedno manj vode. Enačba za silo teže v danem trenutku je torej $F_g = g\cdot(m_0+m_\alpha)$, kjer je $m_\alpha$ masa vode v trupu rakete. - \item Da raketa vzleti, mora biti zagotovljeno naslednje stanje: $F_g < F_\alpha$. To se zgodi takrat, ko je potisk oziroma potisna sila vode dovolj velika ter je izteklo že dovolj vode. + \item Da raketa vzleti, mora biti zagotovljeno naslednje stanje: $F_g < F_\alpha$. To se zgodi takrat, ko je potisk oziroma potisna sila vode dovolj velika ter je izteklo že dovolj vode, da gravitacijska sila ni prevelika. \item $t_0$ je začetni časovni žig meritev ob odprtju ventila. \item $t_\alpha$ je čas ob danem času/volumnu/pritisku/potisku/.... - \item $V_0$ predstavlja začetni volumen vode v plastenki. V meritvah bo to spremenljivka in bo poizkusno variiran. + \item $V_0$ predstavlja začetni volumen vode v plastenki. V meritvah bo to spremenljivka in bo poizkusno variirana. \item $V_\alpha$ je volumen vode ob danem času/volumnu/pritisku/potisku/... med letom v plastenki. \item $p_0$ je začetni tlak v plastenki in hkrati tlak okolice. Tlak okolice ne bo merjen, ker se smatra, da se zanemarljivo spreminja. Pri računanju, kjer je potreben tlak okolice, se uporabi $p_0$. - \item $p_\alpha$ je delta oziroma razlika med tlakom v plastenki in $p_0$ oziroma tlakom okolice ob danem času/volumnu/pritisku/potisku/.... -\subsubsection{Hipoteze oziroma predvidevanja} + \item $p_\alpha$ je delta oziroma razlika med tlakom v plastenki in $p_0$ oziroma tlakom okolice ob danem \\ času/volumnu/pritisku/potisku/.... +\subsection{Hipoteze oziroma predvidevanja} \begin{itemize} - \item Predvidevam, da bo večanje količine vode ($V_0$) na neki točki postalo brezpredmetno, saj bo raketa pretežka, beri $F_g$ bo prevelik in bo voda prvih nekaj desetink sekunde zgolj na tleh iztekala vodo. + \item Predvidevam, da bo večanje količine vode ($V_0$) na neki točki postalo brezpredmetno, saj bo raketa pretežka, beri $F_g$ bo prevelik, in bo raketa prvih nekaj desetink sekunde zgolj na tleh iztekala vodo. \end{itemize} \section{Licence slik} \begin{enumerate} diff --git a/fiz/naloga/tekst/dokument.toc b/fiz/naloga/tekst/dokument.toc index 7b7f9c4..92a0651 100644 --- a/fiz/naloga/tekst/dokument.toc +++ b/fiz/naloga/tekst/dokument.toc @@ -10,14 +10,14 @@ \contentsline {subsubsection}{\numberline {3.1.1}HX711 ADC in vaga}{3}{subsubsection.3.1.1}% \contentsline {subsubsection}{\numberline {3.1.2}Analogni merilnik tlaka}{3}{subsubsection.3.1.2}% \contentsline {subsubsection}{\numberline {3.1.3}Videokamera in program Tracker}{3}{subsubsection.3.1.3}% -\contentsline {subsubsection}{\numberline {3.1.4}ESP8266 ESP-12E NodeMCU}{3}{subsubsection.3.1.4}% +\contentsline {subsubsection}{\numberline {3.1.4}ESP8266 ESP-12E NodeMCU}{4}{subsubsection.3.1.4}% \contentsline {subsubsection}{\numberline {3.1.5}Navoji, plastenke in plastični adapterji}{4}{subsubsection.3.1.5}% \contentsline {subsubsection}{\numberline {3.1.6}Vzletna rampa}{4}{subsubsection.3.1.6}% \contentsline {subsection}{\numberline {3.2}Merjene količine}{4}{subsection.3.2}% \contentsline {subsection}{\numberline {3.3}Konstante}{4}{subsection.3.3}% \contentsline {section}{\numberline {4}Obseg spreminjanja neodvisne količine}{4}{section.4}% -\contentsline {section}{\numberline {5}Grafi, s katerimi bodo meritve predstavljene}{4}{section.5}% +\contentsline {section}{\numberline {5}Grafi, s katerimi bodo meritve predstavljene}{5}{section.5}% \contentsline {section}{\numberline {6}Opis teoretičnega modela}{5}{section.6}% -\contentsline {subsubsection}{\numberline {6.0.1}Hipoteze oziroma predvidevanja}{5}{subsubsection.6.0.1}% +\contentsline {subsection}{\numberline {6.1}Hipoteze oziroma predvidevanja}{5}{subsection.6.1}% \contentsline {section}{\numberline {7}Licence slik}{5}{section.7}% -\contentsline {section}{\numberline {8}Zaključek}{5}{section.8}% +\contentsline {section}{\numberline {8}Zaključek}{6}{section.8}% diff --git a/fiz/naloga/tekst/stderr.log b/fiz/naloga/tekst/stderr.log index 699d7ac..72cb4d7 100644 --- a/fiz/naloga/tekst/stderr.log +++ b/fiz/naloga/tekst/stderr.log @@ -1,9 +1 @@ -<</Type/XRef/Filter/FlateDecode/ID[<0AB2ED76E989BBC12D14A0D0E4C060CE><0AB2ED76E989BBC12D14A0D0E4C060CE>]/Index[ 0 308]/Info 306 0 R/Length 755/Root 305 0 R/Size 308/W[ 1 3 1]>> -terminate called after throwing an instance of 'PoDoFo::PdfError' -/home/a/projects/doc/f5ff.sh: line 4: 22731 Aborted podofouncompress $1.pdf $1-uncompressed.pdf -/home/a/projects/doc/f5ff.sh: line 5: /home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-uncompressed.pdf: No such file or directory -/home/a/projects/doc/f5ff.sh: line 6: /home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-tmp.pdf: No such file or directory -GPL Ghostscript 9.27: Unrecoverable error, exit code 1 -rm: cannot remove '/home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-uncompressed.pdf': No such file or directory -rm: cannot remove '/home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-modified.pdf': No such file or directory -rm: cannot remove '/home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-tmp.pdf': No such file or directory +<</Type/XRef/Filter/FlateDecode/ID[<BD17561BCF13385F86FD65ED46072B4D><BD17561BCF13385F86FD65ED46072B4D>]/Index[ 0 303]/Info 301 0 R/Length 751/Root 300 0 R/Size 303/W[ 1 3 1]>> diff --git a/fiz/naloga/tekst/stdout.log b/fiz/naloga/tekst/stdout.log index 41399f8..16cf057 100644 --- a/fiz/naloga/tekst/stdout.log +++ b/fiz/naloga/tekst/stdout.log @@ -544,112 +544,508 @@ dftex.map}] Overfull \hbox (5.0pt too wide) in paragraph at lines 159--160 [][] -Overfull \hbox (5.0pt too wide) in paragraph at lines 179--180 +Overfull \hbox (5.0pt too wide) in paragraph at lines 180--181 [][] [2pdfTeX warning (ext4): destination with the same identifier (name{figure.1}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.186 \subsubsection +l.187 \subsubsection {HX711 ADC in vaga}pdfTeX warning (ext4): destination with the same identifier (name{figure.2}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.186 \subsubsection +l.187 \subsubsection {HX711 ADC in vaga} <./img-tracked/navoji.jpg> <./img-track ed/rampa.jpg>] -Overfull \hbox (5.0pt too wide) in paragraph at lines 217--218 +Overfull \hbox (5.0pt too wide) in paragraph at lines 218--219 [][] + +Overfull \vbox (10.01083pt too high) has occurred while \output is active [3pdfTeX warning (ext4): destination with the same identifier (name{figure.3}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.228 T - ako kot v prejšnji projektni nalogi bom tukaj kot procesor za meril... -pdfTeX warning (ext4): destination with the same identifier (name{figure.4}) ha -s been already used, duplicate ignored +l.226 \end{multicols} + pdfTeX warning (ext4): destination with the same identifie +r (name{figure.4}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.228 T - ako kot v prejšnji projektni nalogi bom tukaj kot procesor za meril... -pdfTeX warning (ext4): destination with the same identifier (name{figure.5}) ha -s been already used, duplicate ignored +l.226 \end{multicols} + pdfTeX warning (ext4): destination with the same identifie +r (name{figure.5}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.228 T - ako kot v prejšnji projektni nalogi bom tukaj kot procesor za meril... - <./img/loadcell.jpg> <./img/pressure.jpg> <./img-tracked/tracker.png>] -Overfull \hbox (5.0pt too wide) in paragraph at lines 236--237 +l.226 \end{multicols} + <./img/loadcell.jpg> <./img/pressure.jpg> <./img-tracked/ +tracker.png>] +Overfull \hbox (5.0pt too wide) in paragraph at lines 237--238 [][] [4pdfTeX warning (ext4): destination with the same identifier (name{figure.6}) has been already used, duplicate ignored <argument> ...shipout:D \box_use:N \l_shipout_box -l.270 \item U +l.271 \item U poštevali bomo dve glavni sili na raketo kot sistem, silo te... - <./img/esp8266.jpg>] -Overfull \hbox (55.24744pt too wide) in paragraph at lines 277--278 -[]$\OML/cmm/m/it/10 p[]$ \OT1/cmr/m/n/10 je delta ozi-roma raz-lika med tla-kom - v pla-stenki in $\OML/cmm/m/it/10 p[]$ \OT1/cmr/m/n/10 ozi-roma tla-kom oko-li -ce ob da-nem ^^Tcasu/volumnu/pritisku/potisku/.... - -Package hyperref Warning: Difference (2) between bookmark levels is greater -(hyperref) than one, level fixed on input line 278. + <./img/esp8266.jpg>] [5] [6] -[5] [6] - -! LaTeX Error: \begin{itemize} on input line 268 ended by \end{document}. +! LaTeX Error: \begin{itemize} on input line 269 ended by \end{document}. See the LaTeX manual or LaTeX Companion for explanation. Type H <return> for immediate help. ... -l.312 \end{document} +l.313 \end{document} -(./dokument.aux) - -Package rerunfilecheck Warning: File `dokument.out' has changed. -(rerunfilecheck) Rerun to get outlines right -(rerunfilecheck) or use package `bookmark'. - - ) +(./dokument.aux) ) (\end occurred inside a group at level 1) -### semi simple group (level 1) entered at line 268 (\begingroup) +### semi simple group (level 1) entered at line 269 (\begingroup) ### bottom level -(see the transcript file for additional information)pdfTeX warning (dest): name -{section.9} has been referenced but does not exist, replaced by a fixed one - -{/usr/local/texlive/2020/texmf-dist/fonts/enc/dvips/cm-super/cm-super-ts1.enc}< -/usr/local/texlive/2020/texmf-dist/fonts/type1/public/ccicons/ccicons.pfb></usr -/local/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmbx10.pfb></usr/ -local/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmbx12.pfb></usr/l -ocal/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmbx9.pfb></usr/loc -al/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmcsc10.pfb></usr/loc -al/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb></usr/loca -l/texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi7.pfb></usr/local/ -texlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb></usr/local/te -xlive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmr12.pfb></usr/local/texl -ive/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmr17.pfb></usr/local/texliv -e/2020/texmf-dist/fonts/type1/public/amsfonts/cm/cmr6.pfb></usr/local/texlive/2 -020/texmf-dist/fonts/type1/public/amsfonts/cm/cmr7.pfb></usr/local/texlive/2020 -/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr/local/texlive/2020/te -xmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb></usr/local/texlive/2020/texmf --dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb></usr/local/texlive/2020/texmf- -dist/fonts/type1/public/amsfonts/cm/cmti10.pfb></usr/local/texlive/2020/texmf-d -ist/fonts/type1/public/amsfonts/cm/cmti9.pfb></usr/local/texlive/2020/texmf-dis -t/fonts/type1/public/amsfonts/cm/cmtt10.pfb></usr/local/texlive/2020/texmf-dist -/fonts/type1/public/amsfonts/cm/cmtt8.pfb></usr/local/texlive/2020/texmf-dist/f -onts/type1/public/cm-super/sfrm1000.pfb> -Output written on dokument.pdf (6 pages, 7708687 bytes). +(see the transcript file for additional information){/usr/local/texlive/2020/te +xmf-dist/fonts/enc/dvips/cm-super/cm-super-ts1.enc}</usr/local/texlive/2020/tex +mf-dist/fonts/type1/public/ccicons/ccicons.pfb></usr/local/texlive/2020/texmf-d +ist/fonts/type1/public/amsfonts/cm/cmbx10.pfb></usr/local/texlive/2020/texmf-di +st/fonts/type1/public/amsfonts/cm/cmbx12.pfb></usr/local/texlive/2020/texmf-dis +t/fonts/type1/public/amsfonts/cm/cmbx9.pfb></usr/local/texlive/2020/texmf-dist/ +fonts/type1/public/amsfonts/cm/cmcsc10.pfb></usr/local/texlive/2020/texmf-dist/ +fonts/type1/public/amsfonts/cm/cmmi10.pfb></usr/local/texlive/2020/texmf-dist/f +onts/type1/public/amsfonts/cm/cmmi7.pfb></usr/local/texlive/2020/texmf-dist/fon +ts/type1/public/amsfonts/cm/cmr10.pfb></usr/local/texlive/2020/texmf-dist/fonts +/type1/public/amsfonts/cm/cmr12.pfb></usr/local/texlive/2020/texmf-dist/fonts/t +ype1/public/amsfonts/cm/cmr17.pfb></usr/local/texlive/2020/texmf-dist/fonts/typ +e1/public/amsfonts/cm/cmr6.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/ +public/amsfonts/cm/cmr7.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/pub +lic/amsfonts/cm/cmr8.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public +/amsfonts/cm/cmr9.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/am +sfonts/cm/cmsy10.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/ams +fonts/cm/cmti10.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/amsf +onts/cm/cmti9.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/amsfon +ts/cm/cmtt10.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/amsfont +s/cm/cmtt8.pfb></usr/local/texlive/2020/texmf-dist/fonts/type1/public/cm-super/ +sfrm1000.pfb> +Output written on dokument.pdf (6 pages, 7708653 bytes). SyncTeX written on dokument.synctex.gz. Transcript written on dokument.log. -Error: /undefinedfilename in (/home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-modified.pdf) -Operand stack: - -Execution stack: - %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push -Dictionary stack: - --dict:734/1123(ro)(G)-- --dict:0/20(G)-- --dict:75/200(L)-- -Current allocation mode is local -Last OS error: No such file or directory +Reading 1 0 R +Reading 2 0 R +Reading 3 0 R +Reading 4 0 R +-> Uncompressing object 4 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 5 0 R +Reading 7 0 R +-> Uncompressing object 7 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 8 0 R +Reading 9 0 R +-> Uncompressing object 9 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 10 0 R +Reading 11 0 R +-> Uncompressing object 11 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 12 0 R +Reading 17 0 R +-> Uncompressing object 17 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 18 0 R +Reading 20 0 R +-> Uncompressing object 20 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 21 0 R +Reading 23 0 R +-> Uncompressing object 23 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 24 0 R +Reading 26 0 R +-> Uncompressing object 26 0 +-> Original Length: 15 +-> Uncompressed Length: 7 +Reading 27 0 R +Reading 29 0 R +Reading 30 0 R +Reading 31 0 R +Reading 32 0 R +Reading 33 0 R +Reading 34 0 R +Reading 35 0 R +Reading 36 0 R +Reading 37 0 R +Reading 38 0 R +Reading 39 0 R +Reading 40 0 R +Reading 41 0 R +Reading 42 0 R +Reading 43 0 R +Reading 44 0 R +Reading 45 0 R +Reading 46 0 R +Reading 47 0 R +Reading 48 0 R +Reading 49 0 R +Reading 50 0 R +Reading 51 0 R +Reading 52 0 R +Reading 53 0 R +Reading 54 0 R +Reading 55 0 R +Reading 56 0 R +Reading 57 0 R +Reading 58 0 R +Reading 59 0 R +Reading 60 0 R +Reading 61 0 R +Reading 62 0 R +Reading 63 0 R +Reading 64 0 R +Reading 65 0 R +Reading 66 0 R +Reading 67 0 R +Reading 68 0 R +Reading 69 0 R +Reading 70 0 R +Reading 71 0 R +Reading 72 0 R +Reading 73 0 R +Reading 74 0 R +Reading 75 0 R +Reading 76 0 R +Reading 77 0 R +Reading 78 0 R +Reading 79 0 R +Reading 80 0 R +Reading 81 0 R +Reading 82 0 R +Reading 83 0 R +Reading 84 0 R +Reading 85 0 R +Reading 86 0 R +Reading 87 0 R +Reading 88 0 R +Reading 89 0 R +Reading 90 0 R +Reading 91 0 R +Reading 92 0 R +Reading 93 0 R +Reading 94 0 R +Reading 95 0 R +Reading 96 0 R +Reading 97 0 R +Reading 98 0 R +Reading 99 0 R +Reading 100 0 R +Reading 101 0 R +Reading 102 0 R +Reading 103 0 R +Reading 104 0 R +Reading 105 0 R +Reading 106 0 R +Reading 107 0 R +Reading 108 0 R +Reading 109 0 R +Reading 110 0 R +Reading 111 0 R +Reading 112 0 R +Reading 113 0 R +Reading 114 0 R +Reading 115 0 R +Reading 116 0 R +Reading 117 0 R +Reading 118 0 R +Reading 119 0 R +Reading 120 0 R +Reading 121 0 R +Reading 122 0 R +Reading 123 0 R +Reading 124 0 R +Reading 125 0 R +Reading 126 0 R +Reading 127 0 R +-> Uncompressing object 127 0 +-> Original Length: 2063 +-> Uncompressed Length: 8517 +Reading 128 0 R +Reading 129 0 R +Reading 130 0 R +Reading 131 0 R +Reading 132 0 R +Reading 133 0 R +Reading 134 0 R +Reading 135 0 R +Reading 136 0 R +Reading 137 0 R +Reading 138 0 R +Reading 139 0 R +Reading 140 0 R +Reading 141 0 R +Reading 142 0 R +Reading 143 0 R +-> Uncompressing object 143 0 +-> Original Length: 2727301 +-> Uncompressed Length: 23887872 +Reading 144 0 R +Reading 145 0 R +Reading 146 0 R +-> Uncompressing object 146 0 +-> Original Length: 2780406 +-> Uncompressed Length: 23887872 +Reading 147 0 R +Reading 148 0 R +Reading 149 0 R +-> Uncompressing object 149 0 +-> Original Length: 3459 +-> Uncompressed Length: 9626 +Reading 150 0 R +Reading 151 0 R +Reading 152 0 R +Reading 153 0 R +Reading 154 0 R +Reading 155 0 R +Reading 156 0 R +Reading 157 0 R +Reading 158 0 R +Reading 159 0 R +Reading 160 0 R +-> Uncompressing object 160 0 +-> Original Length: 791841 +-> Uncompressed Length: 53747712 +Reading 161 0 R +-> Uncompressing object 161 0 +-> Original Length: 56768 +-> Uncompressed Length: 585000 +Reading 162 0 R +-> Uncompressing object 162 0 +-> Original Length: 218327 +-> Uncompressed Length: 4312503 +Reading 163 0 R +Reading 164 0 R +Reading 165 0 R +-> Uncompressing object 165 0 +-> Original Length: 2698 +-> Uncompressed Length: 7363 +Reading 166 0 R +Reading 167 0 R +Reading 168 0 R +Reading 169 0 R +Reading 170 0 R +-> Uncompressing object 170 0 +-> Original Length: 888493 +-> Uncompressed Length: 9975273 +Reading 171 0 R +Reading 172 0 R +Reading 173 0 R +-> Uncompressing object 173 0 +-> Original Length: 2023 +-> Uncompressed Length: 6065 +Reading 174 0 R +Reading 175 0 R +Reading 177 0 R +Reading 178 0 R +Reading 179 0 R +Reading 180 0 R +Reading 181 0 R +Reading 182 0 R +Reading 183 0 R +Reading 184 0 R +Reading 185 0 R +Reading 186 0 R +Reading 187 0 R +Reading 188 0 R +Reading 189 0 R +Reading 190 0 R +Reading 191 0 R +Reading 192 0 R +Reading 193 0 R +Reading 194 0 R +-> Uncompressing object 194 0 +-> Original Length: 3095 +-> Uncompressed Length: 10982 +Reading 195 0 R +Reading 196 0 R +Reading 197 0 R +Reading 198 0 R +Reading 199 0 R +Reading 200 0 R +Reading 201 0 R +Reading 202 0 R +Reading 203 0 R +Reading 204 0 R +Reading 205 0 R +Reading 206 0 R +Reading 207 0 R +Reading 208 0 R +Reading 209 0 R +Reading 210 0 R +Reading 211 0 R +Reading 212 0 R +Reading 213 0 R +Reading 214 0 R +Reading 215 0 R +Reading 216 0 R +-> Uncompressing object 216 0 +-> Original Length: 1740 +-> Uncompressed Length: 4400 +Reading 217 0 R +Reading 218 0 R +Reading 219 0 R +Reading 220 0 R +Reading 221 0 R +Reading 222 0 R +Reading 223 0 R +Reading 224 0 R +Reading 225 0 R +Reading 226 0 R +Reading 227 0 R +Reading 228 0 R +Reading 229 0 R +Reading 230 0 R +Reading 231 0 R +Reading 232 0 R +Reading 233 0 R +Reading 234 0 R +Reading 235 0 R +Reading 236 0 R +Reading 237 0 R +Reading 238 0 R +Reading 239 0 R +Reading 240 0 R +Reading 241 0 R +Reading 242 0 R +Reading 243 0 R +Reading 244 0 R +Reading 245 0 R +-> Uncompressing object 245 0 +-> Original Length: 6776 +-> Uncompressed Length: 7209 +Reading 246 0 R +Reading 247 0 R +-> Uncompressing object 247 0 +-> Original Length: 18281 +-> Uncompressed Length: 19152 +Reading 248 0 R +Reading 249 0 R +-> Uncompressing object 249 0 +-> Original Length: 15243 +-> Uncompressed Length: 16063 +Reading 250 0 R +Reading 251 0 R +-> Uncompressing object 251 0 +-> Original Length: 7846 +-> Uncompressed Length: 8318 +Reading 252 0 R +Reading 253 0 R +-> Uncompressing object 253 0 +-> Original Length: 7500 +-> Uncompressed Length: 7963 +Reading 254 0 R +Reading 255 0 R +-> Uncompressing object 255 0 +-> Original Length: 8553 +-> Uncompressed Length: 9047 +Reading 256 0 R +Reading 257 0 R +-> Uncompressing object 257 0 +-> Original Length: 7187 +-> Uncompressed Length: 7627 +Reading 258 0 R +Reading 259 0 R +-> Uncompressing object 259 0 +-> Original Length: 23122 +-> Uncompressed Length: 24208 +Reading 260 0 R +Reading 261 0 R +-> Uncompressing object 261 0 +-> Original Length: 12791 +-> Uncompressed Length: 13491 +Reading 262 0 R +Reading 263 0 R +-> Uncompressing object 263 0 +-> Original Length: 10349 +-> Uncompressed Length: 10949 +Reading 264 0 R +Reading 265 0 R +-> Uncompressing object 265 0 +-> Original Length: 7405 +-> Uncompressed Length: 7849 +Reading 266 0 R +Reading 267 0 R +-> Uncompressing object 267 0 +-> Original Length: 7782 +-> Uncompressed Length: 8239 +Reading 268 0 R +Reading 269 0 R +-> Uncompressing object 269 0 +-> Original Length: 13326 +-> Uncompressed Length: 14045 +Reading 270 0 R +Reading 271 0 R +-> Uncompressing object 271 0 +-> Original Length: 12234 +-> Uncompressed Length: 12857 +Reading 272 0 R +Reading 273 0 R +-> Uncompressing object 273 0 +-> Original Length: 6933 +-> Uncompressed Length: 7374 +Reading 274 0 R +Reading 275 0 R +-> Uncompressing object 275 0 +-> Original Length: 16348 +-> Uncompressed Length: 17108 +Reading 276 0 R +Reading 277 0 R +-> Uncompressing object 277 0 +-> Original Length: 9317 +-> Uncompressed Length: 9842 +Reading 278 0 R +Reading 279 0 R +-> Uncompressing object 279 0 +-> Original Length: 14385 +-> Uncompressed Length: 15138 +Reading 280 0 R +Reading 281 0 R +-> Uncompressing object 281 0 +-> Original Length: 3262 +-> Uncompressed Length: 3792 +Reading 282 0 R +Reading 283 0 R +-> Uncompressing object 283 0 +-> Original Length: 5264 +-> Uncompressed Length: 5393 +Reading 284 0 R +Reading 286 0 R +Reading 287 0 R +Reading 288 0 R +Reading 289 0 R +Reading 290 0 R +Reading 291 0 R +Reading 292 0 R +Reading 293 0 R +Reading 294 0 R +Reading 295 0 R +Reading 296 0 R +Reading 297 0 R +Reading 298 0 R +Reading 299 0 R +Reading 300 0 R +Reading 301 0 R +Reading 302 0 R +-> Uncompressing object 302 0 +-> Original Length: 751 +-> Uncompressed Length: 1515 +/home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument.pdf was successfully uncompressed to: /home/a/Documents/sola-gimb-2/fiz/naloga/tekst/dokument-uncompressed.pdf + **** Error: An error occurred while reading an XREF table. + **** The file has been damaged. This may have been caused + **** by a problem while converting or transfering the file. + **** Ghostscript will attempt to recover the data. + **** However, the output may be incorrect. + **** Error: stream Length incorrect. + Output may be incorrect. |