path: root/src/ADS1115_WE.cpp

/*****************************************
* This is a library for the ADS1115 A/D Converter
*
* You'll find an example which should enable you to use the library. 
*
* You are free to use it, change it or build on it. In case you like 
* it, it would be cool if you give it a star.
* 
* If you find bugs, please inform me!
* 
* Written by Wolfgang (Wolle) Ewald
* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English)
* https://wolles-elektronikkiste.de/ads1115 (German)
*
*******************************************/

#include "ADS1115_WE.h"

ADS1115_WE::ADS1115_WE(int addr){
    i2cAddress = addr;
}

ADS1115_WE::ADS1115_WE(){
    i2cAddress = 0x48;
}

void ADS1115_WE::reset(){
    Wire.beginTransmission(0);
    Wire.write(0x06);
    Wire.endTransmission();
}

bool ADS1115_WE::init(){    
    Wire.beginTransmission(i2cAddress);
    uint8_t success = Wire.endTransmission();
    if(success){
        return 0;
    }
    writeRegister(ADS1115_CONFIG_REG, ADS1115_REG_RESET_VAL);
    setVoltageRange_mV(ADS1115_RANGE_2048);
    writeRegister(ADS1115_LO_THRESH_REG, 0x8000);
    writeRegister(ADS1115_HI_THRESH_REG, 0x7FFF);
    deviceMeasureMode = ADS1115_SINGLE;
    return 1;
}

void ADS1115_WE::setAlertPinMode(ADS1115_COMP_QUE mode){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg &= ~(0x0003);    
    currentConfReg |= mode;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
}

void ADS1115_WE::setAlertLatch(ADS1115_LATCH latch){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg &= ~(0x0004);    
    currentConfReg |= latch;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
}

void ADS1115_WE::setAlertPol(ADS1115_ALERT_POL polarity){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg &= ~(0x0008);    
    currentConfReg |= polarity;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
}

void ADS1115_WE::setAlertModeAndLimit_V(ADS1115_COMP_MODE mode, float hiThres, float loThres){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg &= ~(0x0010);    
    currentConfReg |= mode;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
    int16_t alertLimit = calcLimit(hiThres);
    writeRegister(ADS1115_HI_THRESH_REG, alertLimit);
    alertLimit = calcLimit(loThres);
    writeRegister(ADS1115_LO_THRESH_REG, alertLimit);
    
}

void ADS1115_WE::setConvRate(ADS1115_CONV_RATE rate){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg &= ~(0x00E0);    
    currentConfReg |= rate;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
}

convRate ADS1115_WE::getConvRate(){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    return (convRate)(currentConfReg & 0xE0);
}
    
void ADS1115_WE::setMeasureMode(ADS1115_MEASURE_MODE mode){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    deviceMeasureMode = mode;
    currentConfReg &= ~(0x0100);    
    currentConfReg |= mode;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
}

void ADS1115_WE::setVoltageRange_mV(ADS1115_RANGE range){
    uint16_t currentVoltageRange = voltageRange;
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    uint16_t currentRange = (currentConfReg >> 9) & 7;
    uint16_t currentAlertPinMode = currentConfReg & 3;
    
    setMeasureMode(ADS1115_SINGLE);
    
    switch(range){
        case ADS1115_RANGE_6144:
            voltageRange = 6144;
            break;
        case ADS1115_RANGE_4096:
            voltageRange = 4096;
            break;
        case ADS1115_RANGE_2048:
            voltageRange = 2048;
            break;
        case ADS1115_RANGE_1024:
            voltageRange = 1024;
            break;
        case ADS1115_RANGE_0512:
            voltageRange = 512;
            break;
        case ADS1115_RANGE_0256:
            voltageRange = 256;
            break;
    }
    
    if ((currentRange != range) && (currentAlertPinMode != ADS1115_DISABLE_ALERT)){
        int16_t alertLimit = readRegister(ADS1115_HI_THRESH_REG);
        alertLimit = alertLimit * (currentVoltageRange * 1.0 / voltageRange);
        writeRegister(ADS1115_HI_THRESH_REG, alertLimit);
        
        alertLimit = readRegister(ADS1115_LO_THRESH_REG);
        alertLimit = alertLimit * (currentVoltageRange * 1.0 / voltageRange);
        writeRegister(ADS1115_LO_THRESH_REG, alertLimit);
    }
    
    currentConfReg &= ~(0x0E00);    
    currentConfReg |= range;
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
    convRate rate = getConvRate();
    delayAccToRate(rate);
}

void ADS1115_WE::setAutoRange(){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    setVoltageRange_mV(ADS1115_RANGE_6144);
    
    if(deviceMeasureMode == ADS1115_SINGLE){
        setMeasureMode(ADS1115_CONTINUOUS);
        convRate rate = getConvRate();
        delayAccToRate(rate);
    }
    
    float result = abs(getResult_mV());
    range optRange = ADS1115_RANGE_6144;
    
    if(result < 205.0){
        optRange = ADS1115_RANGE_0256;
    }
    else if(result < 410.0){
        optRange = ADS1115_RANGE_0512;
    }
    else if(result < 820.0){
        optRange = ADS1115_RANGE_1024;
    }
    else if(result < 1640.0){
        optRange = ADS1115_RANGE_2048;
    }
    else if(result < 3280.0){
        optRange = ADS1115_RANGE_4096;
    }
    
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
    setVoltageRange_mV(optRange); 
}

void ADS1115_WE::delayAccToRate(convRate cr){
    switch(cr){
        case ADS1115_8_SPS:
            delay(130);
            break;
        case ADS1115_16_SPS:
            delay(65);
            break;
        case ADS1115_32_SPS:
            delay(32);
            break;
        case ADS1115_64_SPS:
            delay(16);
            break;
        case ADS1115_128_SPS:
            delay(8);
            break;
        case ADS1115_250_SPS:
            delay(4);
            break;
        case ADS1115_475_SPS:
            delay(3);
            break;
        case ADS1115_860_SPS:
            delay(2);
            break;
    }
}
    

void ADS1115_WE::setCompareChannels(ADS1115_MUX mux){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg &= ~(0x7000);    
    currentConfReg |= (mux);
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
    
    if(!(currentConfReg & 0x0100)){  // => if not single shot mode
        convRate rate = getConvRate();      
        delayAccToRate(rate);
        delayAccToRate(rate);               
    }       
}
    
bool ADS1115_WE::isBusy(){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    return (!(currentConfReg>>15) & 1);
}
    
void ADS1115_WE::startSingleMeasurement(){
    uint16_t currentConfReg = readRegister(ADS1115_CONFIG_REG);
    currentConfReg |= (1 << 15);
    writeRegister(ADS1115_CONFIG_REG, currentConfReg);
}
    
float ADS1115_WE::getResult_V(){
    int16_t rawResult = readRegister(ADS1115_CONV_REG);
    float result = (rawResult * 1.0 / ADS1115_REG_FACTOR) * voltageRange/1000;
    return result;  
}

float ADS1115_WE::getResult_mV(){
    int16_t rawResult = readRegister(ADS1115_CONV_REG);
    float result = (rawResult * 1.0 / ADS1115_REG_FACTOR) * voltageRange;
    return result;
}

int16_t ADS1115_WE::getRawResult(){
    int16_t rawResult = readRegister(ADS1115_CONV_REG);
    return rawResult;
}

int16_t ADS1115_WE::getResultWithRange(int16_t min, int16_t max){
    int16_t rawResult = readRegister(ADS1115_CONV_REG);
    int16_t result = 0;
    result = map(rawResult, -32767, 32767, min, max);
    return result;
}

int16_t ADS1115_WE::getResultWithRange(int16_t min, int16_t max, int16_t maxMillivolt){
    int16_t rawResult = readRegister(ADS1115_CONV_REG);
    int16_t result = 0;
    result = map(rawResult, -32767, 32767, min, max);
    result = (int16_t) ((1.0 * result * voltageRange / maxMillivolt) + 0.5);
    return result;
}

uint16_t ADS1115_WE::getVoltageRange_mV(){
    return voltageRange;
}

void ADS1115_WE::setAlertPinToConversionReady(){
    writeRegister(ADS1115_LO_THRESH_REG, (0<<15));
    writeRegister(ADS1115_HI_THRESH_REG, (1<<15));
}

void ADS1115_WE::clearAlert(){
    readRegister(ADS1115_CONV_REG);
}

/************************************************ 
    private functions
*************************************************/

int16_t ADS1115_WE::calcLimit(float rawLimit){
    int16_t limit = (int16_t)((rawLimit * ADS1115_REG_FACTOR / voltageRange)*1000);
    return limit;
}

uint8_t ADS1115_WE::writeRegister(uint8_t reg, uint16_t val){
  Wire.beginTransmission(i2cAddress);
  uint8_t lVal = val & 255;
  uint8_t hVal = val >> 8;
  Wire.write(reg);
  Wire.write(hVal);
  Wire.write(lVal);
  return Wire.endTransmission();
}
  
uint16_t ADS1115_WE::readRegister(uint8_t reg){
  uint8_t MSByte = 0, LSByte = 0;
  uint16_t regValue = 0;
  Wire.beginTransmission(i2cAddress);
  Wire.write(reg);
  Wire.endTransmission();
  Wire.requestFrom(i2cAddress,2);
  if(Wire.available()){
    MSByte = Wire.read();
    LSByte = Wire.read();
  }
  regValue = (MSByte<<8) + LSByte;
  return regValue;
}