path: root/src/core/hle/service/dsp_dsp.cpp

// Copyright 2014 Citra Emulator Project
// Licensed under GPLv2 or any later version
// Refer to the license.txt file included.

#include <cinttypes>

#include "audio_core/hle/pipe.h"

#include "common/hash.h"
#include "common/logging/log.h"

#include "core/hle/kernel/event.h"
#include "core/hle/service/dsp_dsp.h"

////////////////////////////////////////////////////////////////////////////////////////////////////
// Namespace DSP_DSP

namespace DSP_DSP {

static u32 read_pipe_count;
static Kernel::SharedPtr<Kernel::Event> semaphore_event;

struct PairHash {
    template <typename T, typename U>
    std::size_t operator()(const std::pair<T, U> &x) const {
        // TODO(yuriks): Replace with better hash combining function.
        return std::hash<T>()(x.first) ^ std::hash<U>()(x.second);
    }
};

/// Map of (audio interrupt number, channel number) to Kernel::Events. See: RegisterInterruptEvents
static std::unordered_map<std::pair<u32, u32>, Kernel::SharedPtr<Kernel::Event>, PairHash> interrupt_events;

// DSP Interrupts:
// Interrupt #2 occurs every frame tick. Userland programs normally have a thread that's waiting
// for an interrupt event. Immediately after this interrupt event, userland normally updates the
// state in the next region and increments the relevant frame counter by two.
void SignalAllInterrupts() {
    // HACK: The other interrupts have currently unknown purpose, we trigger them each tick in any case.
    for (auto& interrupt_event : interrupt_events)
        interrupt_event.second->Signal();
}

void SignalInterrupt(u32 interrupt, u32 channel) {
    interrupt_events[std::make_pair(interrupt, channel)]->Signal();
}

/**
 * DSP_DSP::ConvertProcessAddressFromDspDram service function
 *  Inputs:
 *      1 : Address
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : (inaddr << 1) + 0x1FF40000 (where 0x1FF00000 is the DSP RAM address)
 */
static void ConvertProcessAddressFromDspDram(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    u32 addr = cmd_buff[1];

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error
    cmd_buff[2] = (addr << 1) + (Memory::DSP_RAM_VADDR + 0x40000);

    LOG_DEBUG(Service_DSP, "addr=0x%08X", addr);
}

/**
 * DSP_DSP::LoadComponent service function
 *  Inputs:
 *      1 : Size
 *      2 : Program mask (observed only half word used)
 *      3 : Data mask (observed only half word used)
 *      4 : (size << 4) | 0xA
 *      5 : Buffer address
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : Component loaded, 0 on not loaded, 1 on loaded
 */
static void LoadComponent(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    u32 size       = cmd_buff[1];
    u32 prog_mask  = cmd_buff[2];
    u32 data_mask  = cmd_buff[3];
    u32 desc       = cmd_buff[4];
    u32 buffer     = cmd_buff[5];

    cmd_buff[0] = IPC::MakeHeader(0x11, 2, 2);
    cmd_buff[1] = RESULT_SUCCESS.raw; // No error
    cmd_buff[2] = 1; // Pretend that we actually loaded the DSP firmware
    cmd_buff[3] = desc;
    cmd_buff[4] = buffer;

    // TODO(bunnei): Implement real DSP firmware loading

    ASSERT(Memory::GetPointer(buffer) != nullptr);
    ASSERT(size > 0x37C);

    LOG_INFO(Service_DSP, "Firmware hash: %#" PRIx64, Common::ComputeHash64(Memory::GetPointer(buffer), size));
    // Some versions of the firmware have the location of DSP structures listed here.
    LOG_INFO(Service_DSP, "Structures hash: %#" PRIx64, Common::ComputeHash64(Memory::GetPointer(buffer) + 0x340, 60));

    LOG_WARNING(Service_DSP, "(STUBBED) called size=0x%X, prog_mask=0x%08X, data_mask=0x%08X, buffer=0x%08X",
                size, prog_mask, data_mask, buffer);
}

/**
 * DSP_DSP::GetSemaphoreEventHandle service function
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      3 : Semaphore event handle
 */
static void GetSemaphoreEventHandle(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error
    cmd_buff[3] = Kernel::g_handle_table.Create(semaphore_event).MoveFrom(); // Event handle

    LOG_WARNING(Service_DSP, "(STUBBED) called");
}

/**
 * DSP_DSP::FlushDataCache service function
 *
 * This Function is a no-op, We aren't emulating the CPU cache any time soon.
 *
 *  Inputs:
 *      1 : Address
 *      2 : Size
 *      3 : Value 0, some descriptor for the KProcess Handle
 *      4 : KProcess handle
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 */
static void FlushDataCache(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();
    u32 address = cmd_buff[1];
    u32 size    = cmd_buff[2];
    u32 process = cmd_buff[4];

    // TODO(purpasmart96): Verify return header on HW

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error

    LOG_TRACE(Service_DSP, "called address=0x%08X, size=0x%X, process=0x%08X", address, size, process);
}

/**
 * DSP_DSP::RegisterInterruptEvents service function
 *  Inputs:
 *      1 : Interrupt Number
 *      2 : Channel Number
 *      4 : Interrupt event handle
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 */
static void RegisterInterruptEvents(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    u32 interrupt = cmd_buff[1];
    u32 channel = cmd_buff[2];
    u32 event_handle = cmd_buff[4];

    if (event_handle) {
        auto evt = Kernel::g_handle_table.Get<Kernel::Event>(cmd_buff[4]);
        if (evt) {
            interrupt_events[std::make_pair(interrupt, channel)] = evt;
            cmd_buff[1] = RESULT_SUCCESS.raw;
            LOG_INFO(Service_DSP, "Registered interrupt=%u, channel=%u, event_handle=0x%08X", interrupt, channel, event_handle);
        } else {
            LOG_CRITICAL(Service_DSP, "Invalid event handle! interrupt=%u, channel=%u, event_handle=0x%08X", interrupt, channel, event_handle);
            ASSERT(false); // This should really be handled at a IPC translation layer.
        }
    } else {
        interrupt_events.erase(std::make_pair(interrupt, channel));
        LOG_INFO(Service_DSP, "Unregistered interrupt=%u, channel=%u, event_handle=0x%08X", interrupt, channel, event_handle);
    }
}

/**
 * DSP_DSP::SetSemaphore service function
 *  Inputs:
 *      1 : Unknown (observed only half word used)
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 */
static void SetSemaphore(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error

    LOG_WARNING(Service_DSP, "(STUBBED) called");
}

/**
 * DSP_DSP::WriteProcessPipe service function
 *  Inputs:
 *      1 : Channel
 *      2 : Size
 *      3 : (size << 14) | 0x402
 *      4 : Buffer
 *  Outputs:
 *      0 : Return header
 *      1 : Result of function, 0 on success, otherwise error code
 */
static void WriteProcessPipe(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    DSP::HLE::DspPipe pipe = static_cast<DSP::HLE::DspPipe>(cmd_buff[1]);
    u32 size = cmd_buff[2];
    u32 buffer = cmd_buff[4];

    ASSERT_MSG(IPC::StaticBufferDesc(size, 1) == cmd_buff[3], "IPC static buffer descriptor failed validation (0x%X). pipe=%u, size=0x%X, buffer=0x%08X", cmd_buff[3], pipe, size, buffer);
    ASSERT_MSG(Memory::GetPointer(buffer) != nullptr, "Invalid Buffer: pipe=%u, size=0x%X, buffer=0x%08X", pipe, size, buffer);

    std::vector<u8> message(size);

    for (size_t i = 0; i < size; i++) {
        message[i] = Memory::Read8(buffer + i);
    }

    DSP::HLE::PipeWrite(pipe, message);

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error

    LOG_DEBUG(Service_DSP, "pipe=%u, size=0x%X, buffer=0x%08X", pipe, size, buffer);
}

/**
 * DSP_DSP::ReadPipeIfPossible service function
 *      A pipe is a means of communication between the ARM11 and DSP that occurs on
 *      hardware by writing to/reading from the DSP registers at 0x10203000.
 *      Pipes are used for initialisation. See also DSP::HLE::PipeRead.
 *  Inputs:
 *      1 : Pipe Number
 *      2 : Unknown
 *      3 : Size in bytes of read (observed only lower half word used)
 *      0x41 : Virtual address of memory buffer to write pipe contents to
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : Number of bytes read from pipe
 */
static void ReadPipeIfPossible(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    DSP::HLE::DspPipe pipe = static_cast<DSP::HLE::DspPipe>(cmd_buff[1]);
    u32 unknown = cmd_buff[2];
    u32 size = cmd_buff[3] & 0xFFFF; // Lower 16 bits are size
    VAddr addr = cmd_buff[0x41];

    ASSERT_MSG(Memory::GetPointer(addr) != nullptr, "Invalid addr: pipe=0x%08X, unknown=0x%08X, size=0x%X, buffer=0x%08X", pipe, unknown, size, addr);

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error
    if (DSP::HLE::GetPipeReadableSize(pipe) >= size) {
        std::vector<u8> response = DSP::HLE::PipeRead(pipe, size);

        Memory::WriteBlock(addr, response.data(), response.size());

        cmd_buff[2] = static_cast<u32>(response.size());
    } else {
        cmd_buff[2] = 0; // Return no data
    }

    LOG_DEBUG(Service_DSP, "pipe=0x%08X, unknown=0x%08X, size=0x%X, buffer=0x%08X, return cmd_buff[2]=0x%08X", pipe, unknown, size, addr, cmd_buff[2]);
}

/**
 * DSP_DSP::ReadPipe service function
 *  Inputs:
 *      1 : Pipe Number
 *      2 : Unknown
 *      3 : Size in bytes of read (observed only lower half word used)
 *      0x41 : Virtual address of memory buffer to write pipe contents to
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : Number of bytes read from pipe
 */
static void ReadPipe(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    DSP::HLE::DspPipe pipe = static_cast<DSP::HLE::DspPipe>(cmd_buff[1]);
    u32 unknown = cmd_buff[2];
    u32 size = cmd_buff[3] & 0xFFFF; // Lower 16 bits are size
    VAddr addr = cmd_buff[0x41];

    ASSERT_MSG(Memory::GetPointer(addr) != nullptr, "Invalid addr: pipe=0x%08X, unknown=0x%08X, size=0x%X, buffer=0x%08X", pipe, unknown, size, addr);

    if (DSP::HLE::GetPipeReadableSize(pipe) >= size) {
        std::vector<u8> response = DSP::HLE::PipeRead(pipe, size);

        Memory::WriteBlock(addr, response.data(), response.size());

        cmd_buff[1] = RESULT_SUCCESS.raw; // No error
        cmd_buff[2] = static_cast<u32>(response.size());
    } else {
        // No more data is in pipe. Hardware hangs in this case; this should never happen.
        UNREACHABLE();
    }

    LOG_DEBUG(Service_DSP, "pipe=0x%08X, unknown=0x%08X, size=0x%X, buffer=0x%08X, return cmd_buff[2]=0x%08X", pipe, unknown, size, addr, cmd_buff[2]);
}

/**
 * DSP_DSP::GetPipeReadableSize service function
 *  Inputs:
 *      1 : Pipe Number
 *      2 : Unknown
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : Number of bytes readable from pipe
 */
static void GetPipeReadableSize(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    DSP::HLE::DspPipe pipe = static_cast<DSP::HLE::DspPipe>(cmd_buff[1]);
    u32 unknown = cmd_buff[2];

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error
    cmd_buff[2] = DSP::HLE::GetPipeReadableSize(pipe);

    LOG_DEBUG(Service_DSP, "pipe=0x%08X, unknown=0x%08X, return cmd_buff[2]=0x%08X", pipe, unknown, cmd_buff[2]);
}

/**
 * DSP_DSP::SetSemaphoreMask service function
 *  Inputs:
 *      1 : Mask
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 */
static void SetSemaphoreMask(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    u32 mask = cmd_buff[1];

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error

    LOG_WARNING(Service_DSP, "(STUBBED) called mask=0x%08X", mask);
}

/**
 * DSP_DSP::GetHeadphoneStatus service function
 *  Inputs:
 *      1 : None
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : The headphone status response, 0 = Not using headphones?,
 *          1 = using headphones?
 */
static void GetHeadphoneStatus(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    cmd_buff[1] = RESULT_SUCCESS.raw; // No error
    cmd_buff[2] = 0; // Not using headphones?

    LOG_WARNING(Service_DSP, "(STUBBED) called");
}

/**
 * DSP_DSP::RecvData service function
 *      This function reads a value out of a DSP register.
 *  Inputs:
 *      1 : Register Number
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : Value in the register
 *  Notes:
 *      This function has only been observed being called with a register number of 0.
 */
static void RecvData(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    u32 register_number = cmd_buff[1];

    ASSERT_MSG(register_number == 0, "Unknown register_number %u", register_number);

    // Application reads this after requesting DSP shutdown, to verify the DSP has indeed shutdown or slept.

    cmd_buff[1] = RESULT_SUCCESS.raw;
    switch (DSP::HLE::GetDspState()) {
    case DSP::HLE::DspState::On:
        cmd_buff[2] = 0;
        break;
    case DSP::HLE::DspState::Off:
    case DSP::HLE::DspState::Sleeping:
        cmd_buff[2] = 1;
        break;
    default:
        UNREACHABLE();
        break;
    }

    LOG_DEBUG(Service_DSP, "register_number=%u", register_number);
}

/**
 * DSP_DSP::RecvDataIsReady service function
 *      This function checks whether a DSP register is ready to be read.
 *  Inputs:
 *      1 : Register Number
 *  Outputs:
 *      1 : Result of function, 0 on success, otherwise error code
 *      2 : non-zero == ready
 *  Note:
 *      This function has only been observed being called with a register number of 0.
 */
static void RecvDataIsReady(Service::Interface* self) {
    u32* cmd_buff = Kernel::GetCommandBuffer();

    u32 register_number = cmd_buff[1];

    ASSERT_MSG(register_number == 0, "Unknown register_number %u", register_number);

    cmd_buff[1] = RESULT_SUCCESS.raw;
    cmd_buff[2] = 1; // Ready to read

    LOG_DEBUG(Service_DSP, "register_number=%u", register_number);
}

const Interface::FunctionInfo FunctionTable[] = {
    {0x00010040, RecvData,                         "RecvData"},
    {0x00020040, RecvDataIsReady,                  "RecvDataIsReady"},
    {0x00030080, nullptr,                          "SendData"},
    {0x00040040, nullptr,                          "SendDataIsEmpty"},
    {0x000500C2, nullptr,                          "SendFifoEx"},
    {0x000600C0, nullptr,                          "RecvFifoEx"},
    {0x00070040, SetSemaphore,                     "SetSemaphore"},
    {0x00080000, nullptr,                          "GetSemaphore"},
    {0x00090040, nullptr,                          "ClearSemaphore"},
    {0x000A0040, nullptr,                          "MaskSemaphore"},
    {0x000B0000, nullptr,                          "CheckSemaphoreRequest"},
    {0x000C0040, ConvertProcessAddressFromDspDram, "ConvertProcessAddressFromDspDram"},
    {0x000D0082, WriteProcessPipe,                 "WriteProcessPipe"},
    {0x000E00C0, ReadPipe,                         "ReadPipe"},
    {0x000F0080, GetPipeReadableSize,              "GetPipeReadableSize"},
    {0x001000C0, ReadPipeIfPossible,               "ReadPipeIfPossible"},
    {0x001100C2, LoadComponent,                    "LoadComponent"},
    {0x00120000, nullptr,                          "UnloadComponent"},
    {0x00130082, FlushDataCache,                   "FlushDataCache"},
    {0x00140082, nullptr,                          "InvalidateDCache"},
    {0x00150082, RegisterInterruptEvents,          "RegisterInterruptEvents"},
    {0x00160000, GetSemaphoreEventHandle,          "GetSemaphoreEventHandle"},
    {0x00170040, SetSemaphoreMask,                 "SetSemaphoreMask"},
    {0x00180040, nullptr,                          "GetPhysicalAddress"},
    {0x00190040, nullptr,                          "GetVirtualAddress"},
    {0x001A0042, nullptr,                          "SetIirFilterI2S1_cmd1"},
    {0x001B0042, nullptr,                          "SetIirFilterI2S1_cmd2"},
    {0x001C0082, nullptr,                          "SetIirFilterEQ"},
    {0x001D00C0, nullptr,                          "ReadMultiEx_SPI2"},
    {0x001E00C2, nullptr,                          "WriteMultiEx_SPI2"},
    {0x001F0000, GetHeadphoneStatus,               "GetHeadphoneStatus"},
    {0x00200040, nullptr,                          "ForceHeadphoneOut"},
    {0x00210000, nullptr,                          "GetIsDspOccupied"},
};

////////////////////////////////////////////////////////////////////////////////////////////////////
// Interface class

Interface::Interface() {
    semaphore_event = Kernel::Event::Create(Kernel::ResetType::OneShot, "DSP_DSP::semaphore_event");
    read_pipe_count = 0;

    Register(FunctionTable);
}

Interface::~Interface() {
    semaphore_event = nullptr;
    interrupt_events.clear();
}

} // namespace