1 files changed, 179 insertions, 0 deletions
diff --git a/src/yuzu_cmd/default_ini.h b/src/yuzu_cmd/default_ini.h
new file mode 100644
index 000000000..b7b8abe1e
--- /dev/null
+++ b/src/yuzu_cmd/default_ini.h
@@ -0,0 +1,179 @@
+// Copyright 2014 Citra Emulator Project
+// Licensed under GPLv2 or any later version
+// Refer to the license.txt file included.
+
+#pragma once
+
+namespace DefaultINI {
+
+const char* sdl2_config_file = R"(
+[Controls]
+# The input devices and parameters for each 3DS native input
+# It should be in the format of "engine:[engine_name],[param1]:[value1],[param2]:[value2]..."
+# Escape characters $0 (for ':'), $1 (for ',') and $2 (for '$') can be used in values
+
+# for button input, the following devices are available:
+#  - "keyboard" (default) for keyboard input. Required parameters:
+#      - "code": the code of the key to bind
+#  - "sdl" for joystick input using SDL. Required parameters:
+#      - "joystick": the index of the joystick to bind
+#      - "button"(optional): the index of the button to bind
+#      - "hat"(optional): the index of the hat to bind as direction buttons
+#      - "axis"(optional): the index of the axis to bind
+#      - "direction"(only used for hat): the direction name of the hat to bind. Can be "up", "down", "left" or "right"
+#      - "threshold"(only used for axis): a float value in (-1.0, 1.0) which the button is
+#          triggered if the axis value crosses
+#      - "direction"(only used for axis): "+" means the button is triggered when the axis value
+#          is greater than the threshold; "-" means the button is triggered when the axis value
+#          is smaller than the threshold
+button_a=
+button_b=
+button_x=
+button_y=
+button_up=
+button_down=
+button_left=
+button_right=
+button_l=
+button_r=
+button_start=
+button_select=
+button_zl=
+button_zr=
+button_home=
+
+# for analog input, the following devices are available:
+#  - "analog_from_button" (default) for emulating analog input from direction buttons. Required parameters:
+#      - "up", "down", "left", "right": sub-devices for each direction.
+#          Should be in the format as a button input devices using escape characters, for example, "engine$0keyboard$1code$00"
+#      - "modifier": sub-devices as a modifier.
+#      - "modifier_scale": a float number representing the applied modifier scale to the analog input.
+#          Must be in range of 0.0-1.0. Defaults to 0.5
+#  - "sdl" for joystick input using SDL. Required parameters:
+#      - "joystick": the index of the joystick to bind
+#      - "axis_x": the index of the axis to bind as x-axis (default to 0)
+#      - "axis_y": the index of the axis to bind as y-axis (default to 1)
+circle_pad=
+c_stick=
+
+# for motion input, the following devices are available:
+#  - "motion_emu" (default) for emulating motion input from mouse input. Required parameters:
+#      - "update_period": update period in milliseconds (default to 100)
+#      - "sensitivity": the coefficient converting mouse movement to tilting angle (default to 0.01)
+motion_device=
+
+# for touch input, the following devices are available:
+#  - "emu_window" (default) for emulating touch input from mouse input to the emulation window. No parameters required
+touch_device=
+
+[Core]
+# Which CPU core to use for CPU emulation
+# 0 (default): Unicorn (slow), 1: Dynarmic (faster)
+cpu_core =
+
+[Renderer]
+# Whether to use software or hardware rendering.
+# 0: Software, 1 (default): Hardware
+use_hw_renderer =
+
+# Whether to use the Just-In-Time (JIT) compiler for shader emulation
+# 0: Interpreter (slow), 1 (default): JIT (fast)
+use_shader_jit =
+
+# Resolution scale factor
+# 0: Auto (scales resolution to window size), 1: Native 3DS screen resolution, Otherwise a scale
+# factor for the 3DS resolution
+resolution_factor =
+
+# Whether to enable V-Sync (caps the framerate at 60FPS) or not.
+# 0 (default): Off, 1: On
+use_vsync =
+
+# The clear color for the renderer. What shows up on the sides of the bottom screen.
+# Must be in range of 0.0-1.0. Defaults to 1.0 for all.
+bg_red =
+bg_blue =
+bg_green =
+
+[Layout]
+# Layout for the screen inside the render window.
+# 0 (default): Default Top Bottom Screen, 1: Single Screen Only, 2: Large Screen Small Screen
+layout_option =
+
+# Toggle custom layout (using the settings below) on or off.
+# 0 (default): Off , 1: On
+custom_layout =
+
+# Screen placement when using Custom layout option
+# 0x, 0y is the top left corner of the render window.
+custom_top_left =
+custom_top_top =
+custom_top_right =
+custom_top_bottom =
+custom_bottom_left =
+custom_bottom_top =
+custom_bottom_right =
+custom_bottom_bottom =
+
+#Whether to toggle frame limiter on or off.
+# 0: Off , 1  (default): On
+toggle_framelimit =
+
+# Swaps the prominent screen with the other screen.
+# For example, if Single Screen is chosen, setting this to 1 will display the bottom screen instead of the top screen.
+# 0 (default): Top Screen is prominent, 1: Bottom Screen is prominent
+swap_screen =
+
+[Audio]
+# Which audio output engine to use.
+# auto (default): Auto-select, null: No audio output, sdl2: SDL2 (if available)
+output_engine =
+
+# Whether or not to enable the audio-stretching post-processing effect.
+# This effect adjusts audio speed to match emulation speed and helps prevent audio stutter,
+# at the cost of increasing audio latency.
+# 0: No, 1 (default): Yes
+enable_audio_stretching =
+
+# Which audio device to use.
+# auto (default): Auto-select
+output_device =
+
+[Data Storage]
+# Whether to create a virtual SD card.
+# 1 (default): Yes, 0: No
+use_virtual_sd =
+
+[System]
+# The system model that Citra will try to emulate
+# 0: Old 3DS (default), 1: New 3DS
+is_new_3ds =
+
+# The system region that Citra will use during emulation
+# -1: Auto-select (default), 0: Japan, 1: USA, 2: Europe, 3: Australia, 4: China, 5: Korea, 6: Taiwan
+region_value =
+
+[Miscellaneous]
+# A filter which removes logs below a certain logging level.
+# Examples: *:Debug Kernel.SVC:Trace Service.*:Critical
+log_filter = *:Info
+
+[Debugging]
+# Port for listening to GDB connections.
+use_gdbstub=false
+gdbstub_port=24689
+
+[WebService]
+# Whether or not to enable telemetry
+# 0: No, 1 (default): Yes
+enable_telemetry =
+# Endpoint URL for submitting telemetry data
+telemetry_endpoint_url = https://services.citra-emu.org/api/telemetry
+# Endpoint URL to verify the username and token
+verify_endpoint_url = https://services.citra-emu.org/api/profile
+# Username and token for Citra Web Service
+# See https://services.citra-emu.org/ for more info
+citra_username =
+citra_token =
+)";
+}