diff options
-rw-r--r-- | 12.-Appendix.md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/12.-Appendix.md b/12.-Appendix.md index bc54dbb..a03a0f1 100644 --- a/12.-Appendix.md +++ b/12.-Appendix.md @@ -76,7 +76,7 @@ It is up to you the programmer to ensure that the inputs are valid. Entering inc * Docker with ClearLinux ## Working but with major quirks -* Odroid N2/+ - Note: You must use the **BOTTOM USB port that is closest to the DC power barrel jack**. All other USB ports do not work for high data rate devices on this machine. Also requires a high quality USB cable. Also as this device does not have built in WiFi it relies on Ethernet or a USB WiFi stick. When using a USB WiFi stick there will be sample alignment glitches every now and then (we count about one USB glitch every 12-24 hours). This results in the DOA/PR results going bad. If you have periodic recalibration turned ON (the default), it's not a huge deal, but you could be about 5 minutes with bad results. +* Odroid N2/+ - Note: You must use the **BOTTOM USB port that is closest to the DC power barrel jack**. All other USB ports do not work for high data rate devices on this machine. Also requires a high quality USB cable. On this device every ~12 hours there is some USB glitch resulting in sample mis-alignment. This results in the DOA/PR results going bad. If you have periodic recalibration turned ON (the default), it's not a huge deal, but you could be about 5 minutes with bad results. ## Not Working * Tinkerboard - Unfortunately pure 32-bit ARM CPUs are not supported by Miniforge Conda. |