diff options
Diffstat (limited to '_ont_xgs/ont-hisense-ltf7267-bha+.md')
| -rw-r--r-- | _ont_xgs/ont-hisense-ltf7267-bha+.md | 72 |
1 files changed, 39 insertions, 33 deletions
diff --git a/_ont_xgs/ont-hisense-ltf7267-bha+.md b/_ont_xgs/ont-hisense-ltf7267-bha+.md index b57cf18..b3989f3 100644 --- a/_ont_xgs/ont-hisense-ltf7267-bha+.md +++ b/_ont_xgs/ont-hisense-ltf7267-bha+.md @@ -63,7 +63,7 @@ This ONT supports dual boot. `kernel0` and `rootfs0` respectively contain the kernel and firmware of the first image, `kernel1` and `rootfs1` the kernel and the firmware of the second one -# General Settings and Useful Commands +# XGS-PON ONU status To access Cortina Shell (needed to check OMCI stuff and XGSPON status) you can use the following command: @@ -163,7 +163,7 @@ XGe Port idx 0 map to Port 6 ``` Please note that some of the above fields are decoded incorrectly, such as `sn` and `versionId` -## Check OLT Vendor (from app-cli session) +## Get information of the OLT vendor (from app-cli session) ```sh Cortina> enable @@ -290,106 +290,112 @@ Link to PPTP eth: ------->instance 0x301 |-----|------|-----|------|---------|---|-----|------|-----|------| ``` -## Changing the Hardware Version +# GPON/OMCI settings + +## Setting ONU GPON Serial Number ```sh # vi /config/scfg.txt ``` -Append line below to the file and save it to change HWVER +Append lines below to the file and save it to change Serial Number ``` -CHAR-ARRAY CFG_ID_GPON_VERSION = {0x46,0x35,0x36,0x38, 0x34,0x53,0x5f,0x76, 0x31,0x00,0x00,0x00, 0x00,0x00}; ##GPON version string, default value is V1.0 +STRING CFG_ID_PON_VENDOR_ID = SMBS; +INT CFG_ID_PON_VSSN = 0xAABBCCDD; ``` Reboot ONT to apply the change -## Changing the Equipment ID + +## Setting ONU GPON LOID and LOID password + +{% include alert.html content="The value 0x0 is null, take note of your LoID and password from the original ONT" color="red" %} + ```sh # vi /config/scfg.txt ``` -Append the line below to the file and save it to change EQID +Append lines below to the file and save it to change LoID and LoID password ``` -CHAR-ARRAY CFG_ID_GPON_EQID = {0x46,0x49,0x42,0x45, 0x52,0x20,0x42,0x6f, 0x78,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00}; ##GPON ME ONU2G equiment id value, default is saturn +CHAR-ARRAY CFG_ID_LOID = {0x30,0x30,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0}; +CHAR-ARRAY CFG_ID_PASSWD = {0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0}; +``` + +Reboot ONT to apply the change + +## Setting OMCI software version (ME 7) + +```sh +# fw_setenv img_version0 20220527052622 +# fw_setenv img_version0 20220527052622 ``` Reboot ONT to apply the change -## Changing Serial Number +## Setting OMCI hardware version (ME 256) ```sh # vi /config/scfg.txt ``` -Append lines below to the file and save it to change Serial Number +Append line below to the file and save it to change HWVER ``` -STRING CFG_ID_PON_VENDOR_ID = SMBS; -INT CFG_ID_PON_VSSN = 0xAABBCCDD; +CHAR-ARRAY CFG_ID_GPON_VERSION = {0x46,0x35,0x36,0x38, 0x34,0x53,0x5f,0x76, 0x31,0x00,0x00,0x00, 0x00,0x00}; ##GPON version string, default value is V1.0 ``` Reboot ONT to apply the change -## Changing OLT Emulation Type +## Setting OMCI equipment ID (ME 257) ```sh # vi /config/scfg.txt ``` -Append lines below to the file and save it to change Serial Number +Append the line below to the file and save it to change EQID ``` -STRING CFG_ID_PON_OLT_TYPE = ALCL; ##GPON OLT Vendor name, support ZTE,ADTRAN,ALCL,CALIX,SUMITOMO,CORTINA,HUAWEI +CHAR-ARRAY CFG_ID_GPON_EQID = {0x46,0x49,0x42,0x45, 0x52,0x20,0x42,0x6f, 0x78,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00}; ##GPON ME ONU2G equiment id value, default is saturn ``` Reboot ONT to apply the change -## Changing OMCC Version - -{% include alert.html content="In Italy, if you are under some Huawei OLT it's mandatory to use 0xA3, while on Alcatel 0xB4, otherwise you will get O5 status but no MIBs - Note that this can be quirk of TIM Italy" alert="Warning" icon="svg-warning" color="red" %} +# Advanced settings +## Changing OLT Emulation Type ```sh # vi /config/scfg.txt ``` -Append the line below to the file and save it to change Serial Number +Append lines below to the file and save it to change Serial Number ``` -CHAR CFG_ID_OMCC_VERSION = 0xB2; +STRING CFG_ID_PON_OLT_TYPE = ALCL; ##GPON OLT Vendor name, support ZTE,ADTRAN,ALCL,CALIX,SUMITOMO,CORTINA,HUAWEI ``` Reboot ONT to apply the change -## Changing LOID Username/Password +## Changing OMCC Version -{% include alert.html content="The value 0x0 is null, take note of your LoID and password from the original ONT" color="red" %} +{% include alert.html content="In Italy, if you are under some Huawei OLT it's mandatory to use 0xA3, while on Alcatel 0xB4, otherwise you will get O5 status but no MIBs - Note that this can be quirk of TIM Italy" alert="Warning" icon="svg-warning" color="red" %} ```sh # vi /config/scfg.txt ``` -Append lines below to the file and save it to change LoID and LoID password +Append the line below to the file and save it to change Serial Number ``` -CHAR-ARRAY CFG_ID_LOID = {0x30,0x30,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0}; -CHAR-ARRAY CFG_ID_PASSWD = {0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0}; +CHAR CFG_ID_OMCC_VERSION = 0xB2; ``` Reboot ONT to apply the change -## Spoofing firmware version - -```sh -# fw_setenv img_version0 20220527052622 -# fw_setenv img_version0 20220527052622 -``` - -Reboot ONT to apply the change # Known Bugs - `ALCL` OLT mode uses some static configurations on MIBs, so if your OLT has strict configuration checks it might not work properly |