summaryrefslogtreecommitdiffstats
path: root/_ont/ont-nokia-g-010g-q.md
diff options
context:
space:
mode:
authorAndrea Greco <11886092+Andreag00@users.noreply.github.com>2022-12-10 17:38:58 +0100
committerSimone Bortolin <simonebortolin@users.noreply.github.com>2022-12-19 23:09:26 +0100
commit61ed75c34975f485d4edb7310515cc607dab2cf0 (patch)
tree671a4a3448bbdcffd1deddea3011c8d8b2c192fe /_ont/ont-nokia-g-010g-q.md
parentNokia G-010G-T General info (#49) (diff)
downloadhack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar
hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.gz
hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.bz2
hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.lz
hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.xz
hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.zst
hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.zip
Diffstat (limited to '')
-rw-r--r--_ont/ont-nokia-g-010g-q.md4
1 files changed, 2 insertions, 2 deletions
diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md
index 0c6e078..47e13c5 100644
--- a/_ont/ont-nokia-g-010g-q.md
+++ b/_ont/ont-nokia-g-010g-q.md
@@ -40,7 +40,7 @@ parent: Nokia
| mtd2 | 00700000 | 00010000 | "ImageA" |
| mtd3 | 00700000 | 00010000 | "ImageB" |
-This ont seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested.
+This ONT seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested.
## List of firmwares and files
# Serial
@@ -52,7 +52,7 @@ You can easily communicate with the ONT using a TTL converter (for example the C
{% include alert.html content="The ONT's serial logic is 3V3." alert="Warning" icon="svg-warning" color="red" %}
-Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure the CH341A had a 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below.
+Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure whether the CH341A programmer used 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below.
*Also make sure that your TTL converter RX pin voltage threshold is less than (or equal to) 3V3*