From 61ed75c34975f485d4edb7310515cc607dab2cf0 Mon Sep 17 00:00:00 2001
From: Andrea Greco <11886092+Andreag00@users.noreply.github.com>
Date: Sat, 10 Dec 2022 17:38:58 +0100
Subject: Grammar review of the whole wiki (#54)

---
 _ont/ont-nokia-g-010g-q.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to '_ont/ont-nokia-g-010g-q.md')

diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md
index 0c6e078..47e13c5 100644
--- a/_ont/ont-nokia-g-010g-q.md
+++ b/_ont/ont-nokia-g-010g-q.md
@@ -40,7 +40,7 @@ parent: Nokia
 | mtd2 | 00700000 | 00010000  | "ImageA" |
 | mtd3 | 00700000 | 00010000  | "ImageB" |
 
-This ont seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested. 
+This ONT seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested. 
 ## List of firmwares and files
 
 # Serial
@@ -52,7 +52,7 @@ You can easily communicate with the ONT using a TTL converter (for example the C
 
 {% include alert.html content="The ONT's serial logic is 3V3." alert="Warning"  icon="svg-warning" color="red" %}
 
-Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure the CH341A had a 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below.
+Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure whether the CH341A programmer used 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below.
 
 *Also make sure that your TTL converter RX pin voltage threshold is less than (or equal to) 3V3*
 
-- 
cgit v1.2.3