blob: 457d3f5b16cc9646b162240a1757842446e8e775 (
plain) (
tree)
|
|
---
title: D-LINK DPN-100 Rev A2
has_children: false
layout: default
parent: D-LINK
---
# Hardware Specifications
| | |
| ---------------- | --------------- |
| Vendor/Brand | D-LINK |
| Model | DPN-100 Rev A2 |
| Chipset | Lantiq PEB98035 |
| ODM | T&W |
| ODM Product Code | TW2362H-CDEL |
| Flash | 8 MB |
| RAM | 64 MB |
| System | |
| HSGMII | |
| Optics | |
| IP address | |
| Web Gui | |
| SSH | |
| Telnet | |
| Serial | |
| Form Factor | miniONT SFP |
{% include image.html file="dpn-100-rev-a2.jpg" alt="DPN-100 Rev A2" caption="DPN-100 Rev A2" %}
Once you access the stick via ssh you will be presented with a second tier login. The credentials to access the dell shell are: username: `twmanu` , password: `twmanu`.
## Firmware is interchangeable with:
- [Zyxel PMG3000-D20B](/ont-zyxel-pmg3000-d20b)
- [Halny HL-GSFP](/ont-halny-hl-gsfp)
- [Zisa OP151s](/ont-zisa-op151s)
- [T&W TW2362H-CDEL](/ont-t-w-tw2362h-cdel)
# GPON/OMCI settings
{% include alert.html content="All commands start from the twmanu shell." alert="Note" icon="svg-info" color="blue" %}
## Setting ONU GPON Serial Number
{% include alert.html content="The S/N is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %}
```sh
manufactory
set sn ALCLf0f0f0f0
exit
hal
set sn ALCLf0f0f0f0
```
## Setting ONU GPON PLOAM password
{% include alert.html content="The PLOAM password is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %}
This can be done easily via the web UI. If you prefer to do it via the shell use:
```sh
manufactory
set password 1234567899
```
or in hex format without any 0x or separator:
```sh
manufactory
set password hex 31323334353637383939
```
## Show ONU GPON info
```sh
show info
```
# Miscellaneous Links
- [Dlink DPN 100 Change of Serial Number and PLOAM Password](https://www.youtube.com/watch?v=5hpMPJCpUaQ)
|
