/***************************************************************************/
/********************* Sample Dialog Procedures **************************/
/***************************************************************************/
#include "cui.h"
#include "dialogs.h"
#include <stdlib.h>
#include <ctype.h>
#include "..\detect\detect.h"
#define iszBMax 11
#define INT_MAX 32767 /* maximum (signed) int value */
#define cbSymBuf 1024
#define cbNameMax 52
LPSTR _sz = NULL;
#define FSingleByteCharSz(sz) ((BOOL)(((_sz = (sz)) != NULL) \
&& AnsiNext((LPSTR)(_sz)) == _sz + 1))
int FAR PASCAL LibMain(HANDLE, WORD, WORD, LPSTR);
int FAR PASCAL WEP (int);
LPSTR FAR PASCAL SzLastChar(LPSTR);
LPSTR FAR PASCAL SzDlgEvent(WORD);
int FAR PASCAL AsciiToInt(LPSTR);
LPSTR FAR PASCAL IntToAscii(int, LPSTR);
#if 0
typedef struct {
unsigned iType;
unsigned iMajor;
unsigned iMinor;
unsigned iRev;
unsigned fEnhance;
} LAN_DETECT;
int FAR PASCAL GetNetConfiguration(
LAN_DETECT _far *Detect
)
{
return(GetInstalledNet(&Detect->iType, &Detect->iMajor,
&Detect->iMinor, &Detect->iRev, &Detect->fEnhance));
}
#endif
/*
** Purpose:
** CheckBox Dialog procedure for templates with one to ten checkbox
** controls.
**
** Controls Recognized:
** Checkbox - IDC_B1 to IDC_B10 (sequential)
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** "CheckItemsIn" - list of "ON" and "OFF" string items for setting
** the intial state of the checkbox controls, evaluated in
** sequence ("ON" for checked, "OFF" for unchecked). If there
** are more controls than items, extra controls are left unchecked.
** If there are fewer items than controls, extra items are ignored.
** "OptionsGreyed" - list of (one-based) indexes of checkboxes to be
** initialized as disabled. Indexes not in the list will be
** left enabled.
**
** Termination Symbols:
** "CheckItemsOut" - list of same format as "CheckItemsIn" representing
** state of checkbox controls upon return.
** "DLGEVENT" - one of the following, according to control event:
** event value
** ------- -------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FCheckDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
WORD idc, cb, i, cItems;
char szSymBuf[cbSymBuf];
switch (wMsg)
{
case WM_INITDIALOG:
cItems = UsGetListLength("CheckItemsIn");
idc = IDC_B1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("CheckItemsIn", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
if (lstrcmp(szSymBuf, "ON") == 0)
wCheck = 1;
CheckDlgButton(hdlg, idc++, wCheck);
}
cItems = UsGetListLength("OptionsGreyed");
idc = IDC_B1;
for (i = 1; i <= cItems; ++i)
{
int iOpt;
cb = CbGetListItem("OptionsGreyed", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
iOpt = AsciiToInt((LPSTR)szSymBuf);
if (iOpt > 0
&& iOpt <= 10)
EnableWindow(GetDlgItem(hdlg, IDC_B0 + iOpt), 0);
else if (*szSymBuf != '\0')
Assert(fFalse);
}
return(fTrue);
case STF_REINITDIALOG:
case STF_ACTIVATEAPP:
return(fTrue);
case WM_COMMAND:
switch (wParam)
{
case IDC_B1:
case IDC_B2:
case IDC_B3:
case IDC_B4:
case IDC_B5:
case IDC_B6:
case IDC_B7:
case IDC_B8:
case IDC_B9:
case IDC_B10:
CheckDlgButton(hdlg, wParam,
(WORD)!IsDlgButtonChecked(hdlg, wParam));
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
FRemoveSymbol("CheckItemsOut");
for (idc = IDC_B1; GetDlgItem(hdlg, idc); idc++)
if (!FAddListItem("CheckItemsOut",
IsDlgButtonChecked(hdlg, idc) ? "ON" : "OFF"))
{
DestroyWindow(GetParent(hdlg));
return(fFalse);
}
Assert((unsigned)(idc-IDC_B1+1) <= iszBMax);
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Custom Install Dialog procedure for templates with one to ten custom
** options each consisting of at least one checkbox with an optional
** sub-option pushbutton or status string. The dialog also supports
** an install path set button, display of the current install path, and
** display of the current disk space status.
**
** Controls Recognized:
** Checkbox - IDC_B1 to IDC_B10
** with optionaly assocated buttons or text:
** Pushbutton - IDC_SP1 to IDC_SP10
** Text - IDC_STATUS1 to IDC_STATUS10
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_P, IDC_X
** Text - IDC_TEXT1 through IDC_TEXT7
**
** Initialization Symbols:
** "CheckItemsState" - list of "ON" and "OFF" string items for setting
** the intial state of the checkbox controls, evaluated in
** sequence ("ON" for checked, "OFF" for unchecked). If there
** are more controls than items, extra controls are left unchecked.
** If there are fewer items than controls, extra items are ignored.
** "StatusItemsText" - list of strings to initialize status text items
** associated with checkboxes.
** "DriveStatusText" - list of seven strings to initialize drive status
** text items (IDC_TEXT1-7) in the following sequence:
** dst_drive, dst_space_need, dst_space_free,
** win_drive, win_space_need, win_space_free,
** dst_path
** If any of the "win_" items is an empty string, its label
** text will be made non-visible.
**
** Termination Symbols:
** "CheckItemsState" - state of checkbox items (same format as above).
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_P "PATH"
** IDC_X "EXIT"
** IDC_B1 to IDC_B10 "CHK1" to "CHK10"
** IDC_SP1 to IDC_SP10 "BTN1" to "BTN10"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FCustInstDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
char rgchChk[10];
char rgchBtn[10];
WORD idc;
WORD cItems;
WORD i, cb;
char szSymBuf[cbSymBuf];
LPSTR szEvent;
switch (wMsg)
{
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case STF_REINITDIALOG:
case WM_INITDIALOG:
cItems = UsGetListLength("CheckItemsState");
idc = IDC_B1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("CheckItemsState", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
if (lstrcmp(szSymBuf, "ON") == 0)
wCheck = 1;
CheckDlgButton(hdlg, idc++, wCheck);
}
cItems = UsGetListLength("StatusItemsText");
idc = IDC_STATUS1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("StatusItemsText", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
SetDlgItemText(hdlg, idc++, szSymBuf);
}
cItems = UsGetListLength("DriveStatusText");
idc = IDC_TEXT1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("DriveStatusText", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
SetDlgItemText(hdlg, idc++, szSymBuf);
if (i >= 4
&& i <= 6)
{
if (*szSymBuf == '\0')
ShowWindow(GetDlgItem(hdlg, IDC_TEXT4+i), SW_HIDE);
else
ShowWindow(GetDlgItem(hdlg, IDC_TEXT4+i), SW_SHOWNOACTIVATE);
}
}
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
default:
szEvent = (LPSTR)NULL;
break;
case IDC_B1:
case IDC_B2:
case IDC_B3:
case IDC_B4:
case IDC_B5:
case IDC_B6:
case IDC_B7:
case IDC_B8:
case IDC_B9:
case IDC_B10:
lstrcpy((LPSTR)rgchChk, "CHK");
IntToAscii((int)(wParam-IDC_B1+1), (LPSTR)(&rgchChk[3]));
szEvent = (LPSTR)rgchChk;
break;
case IDC_SP1:
case IDC_SP2:
case IDC_SP3:
case IDC_SP4:
case IDC_SP5:
case IDC_SP6:
case IDC_SP7:
case IDC_SP8:
case IDC_SP9:
case IDC_SP10:
lstrcpy((LPSTR)rgchBtn, "BTN");
IntToAscii((int)(wParam-IDC_SP1+1), (LPSTR)(&rgchBtn[3]));
szEvent = (LPSTR)rgchBtn;
break;
case IDC_B:
case IDC_C:
case IDC_X:
szEvent = SzDlgEvent(wParam);
Assert(szEvent != NULL);
break;
case IDC_P:
szEvent = "PATH";
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
}
if (szEvent == (LPSTR)NULL)
break;
FRemoveSymbol("CheckItemsState");
for (idc = IDC_B1; GetDlgItem(hdlg, idc); idc++)
if (!FAddListItem("CheckItemsState",
IsDlgButtonChecked(hdlg, idc) ? "ON" : "OFF"))
{
DestroyWindow(GetParent(hdlg));
return(fFalse);
}
Assert((unsigned)(idc-IDC_B1+1) <= iszBMax);
if (szEvent != (LPSTR)NULL)
if (!FSetSymbolValue("DLGEVENT", szEvent))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
return(fFalse);
}
/*
** Purpose:
** Super-special...
** Custom Install Dialog procedure for templates with one to ten custom
** options each consisting of at least one checkbox with an optional
** sub-option pushbutton or status string. The dialog also supports
** an install path set button, display of the current install path, and
** display of the current disk space status.
**
** Controls Recognized:
** Checkbox - IDC_B1 to IDC_B10
** with optionaly assocated buttons or text:
** Pushbutton - IDC_SP1 to IDC_SP10
** Text - IDC_STATUS1 to IDC_STATUS10
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_P, IDC_X
** Text - IDC_TEXT1 through IDC_TEXT7
**
** Initialization Symbols:
** "CheckItemsState" - list of "ON" and "OFF" string items for setting
** the intial state of the checkbox controls, evaluated in
** sequence ("ON" for checked, "OFF" for unchecked). If there
** are more controls than items, extra controls are left unchecked.
** If there are fewer items than controls, extra items are ignored.
** "StatusItemsText" - list of strings to initialize status text items
** associated with checkboxes.
** "DriveStatusText" - list of seven strings to initialize drive status
** text items (IDC_TEXT1-7) in the following sequence:
** dst_drive, dst_space_need, dst_space_free,
** win_drive, win_space_need, win_space_free,
** dst_path
** If any of the "win_" items is an empty string, its label
** text will be made non-visible.
**
** Termination Symbols:
** "CheckItemsState" - state of checkbox items (same format as above).
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_P "PATH"
** IDC_X "EXIT"
** IDC_B1 to IDC_B10 "CHK1" to "CHK10"
** IDC_SP1 to IDC_SP10 "BTN1" to "BTN10"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FMyCustInstDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
char rgchChk[10];
char rgchBtn[10];
WORD idc;
WORD cItems;
WORD i, cb, cbLen;
static WORD wSelStart[10];
static WORD wSelEnd[10];
char szSymBuf[cbSymBuf];
char rgchText[cbFullPathMax + 1];
LPSTR szEvent;
switch (wMsg)
{
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case STF_REINITDIALOG:
SendDlgItemMessage(hdlg, wParam, EM_SETSEL, 0, MAKELONG(256, 256));
SetFocus(GetDlgItem(hdlg, wParam));
return(fTrue);
case WM_INITDIALOG:
cItems = UsGetListLength("CheckItemsState");
idc = IDC_B1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("CheckItemsState", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
if (lstrcmp(szSymBuf, "ON") == 0)
wCheck = 1;
CheckDlgButton(hdlg, idc++, wCheck);
}
cItems = UsGetListLength("StatusItemsText");
idc = IDC_STATUS1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("StatusItemsText", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
SetDlgItemText(hdlg, idc++, szSymBuf);
}
cItems = UsGetListLength("DriveStatusText");
idc = IDC_TEXT1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("DriveStatusText", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
SetDlgItemText(hdlg, idc++, szSymBuf);
if (i >= 4
&& i <= 6)
{
if (*szSymBuf == '\0')
ShowWindow(GetDlgItem(hdlg, IDC_TEXT4+i), SW_HIDE);
else
ShowWindow(GetDlgItem(hdlg, IDC_TEXT4+i), SW_SHOWNOACTIVATE);
}
}
cItems = UsGetListLength("EditTextIn");
idc = IDC_EDT1-1;
for ( i = 1; i <= cItems; ++i)
{
cb = CbGetListItem("EditTextIn", i, szSymBuf, cbFullPathMax + 1);
Assert(cb < cbFullPathMax + 1);
SendDlgItemMessage(hdlg, idc+i, EM_LIMITTEXT, cbFullPathMax, 0L);
SetDlgItemText(hdlg, idc+i, (LPSTR)szSymBuf);
cbLen = lstrlen(szSymBuf);
cb = CbGetListItem("EditFocus", i, szSymBuf, cbFullPathMax + 1);
Assert(cb < cbFullPathMax + 1);
if (lstrcmp(szSymBuf, "ALL") == 0)
{
wSelStart[i] = 0;
wSelEnd[i] = INT_MAX;
}
else if (lstrcmp(szSymBuf, "START") == 0)
{
wSelStart[i] = 0;
wSelEnd[i] = 0;
}
else /* default == END */
{
wSelStart[i] = (WORD)cbLen;
wSelEnd[i] = (WORD)cbLen;
}
}
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
default:
szEvent = (LPSTR)NULL;
break;
case IDC_B1:
case IDC_B2:
case IDC_B3:
case IDC_B4:
case IDC_B5:
case IDC_B6:
case IDC_B7:
case IDC_B8:
case IDC_B9:
case IDC_B10:
lstrcpy((LPSTR)rgchChk, "CHK");
IntToAscii((int)(wParam-IDC_B1+1), (LPSTR)(&rgchChk[3]));
szEvent = (LPSTR)rgchChk;
break;
case IDC_SP1:
case IDC_SP2:
case IDC_SP3:
case IDC_SP4:
case IDC_SP5:
case IDC_SP6:
case IDC_SP7:
case IDC_SP8:
case IDC_SP9:
case IDC_SP10:
lstrcpy((LPSTR)rgchBtn, "BTN");
IntToAscii((int)(wParam-IDC_SP1+1), (LPSTR)(&rgchBtn[3]));
szEvent = (LPSTR)rgchBtn;
break;
case IDC_TEXT1:
case IDC_TEXT2:
case IDC_TEXT3:
case IDC_TEXT4:
case IDC_TEXT5:
case IDC_TEXT6:
case IDC_TEXT7:
case IDC_TEXT8:
case IDC_TEXT9:
case IDC_TEXT10:
lstrcpy((LPSTR)rgchBtn, "TEXT");
IntToAscii((int)(wParam-IDC_TEXT1+1), (LPSTR)(&rgchBtn[3]));
szEvent = (LPSTR)rgchBtn;
break;
case IDC_EDT1:
case IDC_EDT2:
case IDC_EDT3:
case IDC_EDT4:
case IDC_EDT5:
case IDC_EDT6:
case IDC_EDT7:
case IDC_EDT8:
case IDC_EDT9:
case IDC_EDT10:
if (HIWORD(lParam) == EN_SETFOCUS)
SendDlgItemMessage(hdlg, wParam, EM_SETSEL, 0,
MAKELONG(wSelStart[wParam-IDC_EDT1+1], wSelEnd[wParam-IDC_EDT1+1]));
else if (HIWORD(lParam) == EN_KILLFOCUS)
{
LONG l = SendDlgItemMessage(hdlg, wParam, EM_GETSEL, 0, 0L);
wSelStart[wParam-IDC_EDT1+1] = LOWORD(l);
wSelEnd[wParam-IDC_EDT1+1] = HIWORD(l);
}
break;
case IDC_B:
case IDC_C:
case IDC_X:
szEvent = SzDlgEvent(wParam);
Assert(szEvent != NULL);
break;
case IDC_P:
szEvent = "PATH";
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
}
if (szEvent == (LPSTR)NULL)
break;
FRemoveSymbol("CheckItemsState");
for (idc = IDC_B1; GetDlgItem(hdlg, idc); idc++)
if (!FAddListItem("CheckItemsState",
IsDlgButtonChecked(hdlg, idc) ? "ON" : "OFF"))
{
DestroyWindow(GetParent(hdlg));
return(fFalse);
}
Assert((unsigned)(idc-IDC_B1+1) <= iszBMax);
if (szEvent != (LPSTR)NULL)
if (!FSetSymbolValue("DLGEVENT", szEvent))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
for (idc = IDC_EDT1; GetDlgItem(hdlg, idc); idc++)
{
SendDlgItemMessage(hdlg, idc, (WORD)WM_GETTEXT,
cbFullPathMax + 1, (LONG)((LPSTR)rgchText));
if (!FAddListItem("EditTextOut", rgchText))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
}
ReactivateSetupScript();
break;
}
return(fFalse);
}
/*
** Purpose:
** Edit Dialog procedure for templates with one Edit control.
** (Limits the input string length to cbFullPathMax characters.)
**
** Controls Recognized:
** Edit - IDC_EDIT
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** "EditTextIn" - initial text for IDC_EDIT edit control.
** "EditFocus" - position of intial focus for text string:
** "END" (default), "ALL", or "START"
**
** Termination Symbols:
** "EditTextOut" - text in the IDC_EDIT edit control upon termination.
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FEditDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
static WORD wSelStart = 0;
static WORD wSelEnd = 0;
char rgchText[cbFullPathMax + 1];
WORD cbLen;
WORD cb;
char szSymBuf[cbFullPathMax + 1];
switch (wMsg)
{
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case WM_INITDIALOG:
cb = CbGetSymbolValue("EditTextIn", szSymBuf, cbFullPathMax + 1);
Assert(cb < cbFullPathMax + 1);
SendDlgItemMessage(hdlg, IDC_EDIT, EM_LIMITTEXT, cbFullPathMax, 0L);
SetDlgItemText(hdlg, IDC_EDIT, (LPSTR)szSymBuf);
cbLen = lstrlen(szSymBuf);
cb = CbGetSymbolValue("EditFocus", szSymBuf, cbFullPathMax + 1);
Assert(cb < cbFullPathMax + 1);
if (lstrcmp(szSymBuf, "ALL") == 0)
{
wSelStart = 0;
wSelEnd = INT_MAX;
}
else if (lstrcmp(szSymBuf, "START") == 0)
{
wSelStart = 0;
wSelEnd = 0;
}
else /* default == END */
{
wSelStart = (WORD)cbLen;
wSelEnd = (WORD)cbLen;
}
return(fTrue);
case STF_REINITDIALOG:
SendDlgItemMessage(hdlg, IDC_EDIT, EM_SETSEL, 0, MAKELONG(256, 256));
SetFocus(GetDlgItem(hdlg, IDC_EDIT));
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
case IDC_EDIT:
if (HIWORD(lParam) == EN_SETFOCUS)
SendDlgItemMessage(hdlg, IDC_EDIT, EM_SETSEL, 0,
MAKELONG(wSelStart, wSelEnd));
else if (HIWORD(lParam) == EN_KILLFOCUS)
{
LONG l = SendDlgItemMessage(hdlg, IDC_EDIT, EM_GETSEL, 0, 0L);
wSelStart = LOWORD(l);
wSelEnd = HIWORD(l);
}
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
SendDlgItemMessage(hdlg, IDC_EDIT, (WORD)WM_GETTEXT,
cbFullPathMax + 1, (LONG)((LPSTR)rgchText));
if (!FSetSymbolValue("EditTextOut", rgchText))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Super special Edit Dialog procedure for templates with one Edit control.
** (Limits the input string length to cbFullPathMax characters.)
**
** Controls Recognized:
** Edit - IDC_EDIT
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** "EditTextIn" - initial text for IDC_EDIT edit control.
** "EditFocus" - position of intial focus for text string:
** "END" (default), "ALL", or "START"
**
** Termination Symbols:
** "EditTextOut" - text in the IDC_EDIT edit control upon termination.
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FMyEditDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
static WORD wSelStart = 0;
static WORD wSelEnd = 0;
char rgchText[cbFullPathMax + 1];
WORD cbLen;
WORD cb;
WORD cItems, idc, i;
char rgchChk[10];
char szSymBuf[cbFullPathMax + 1];
LPSTR szEvent;
switch (wMsg)
{
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case WM_INITDIALOG:
cItems = UsGetListLength("InnerChkItemsState");
idc = IDC_B1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("InnerChkItemsState", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
if (lstrcmp(szSymBuf, "ON") == 0)
wCheck = 1;
CheckDlgButton(hdlg, idc++, wCheck);
}
cb = CbGetSymbolValue("EditTextIn", szSymBuf, cbFullPathMax + 1);
Assert(cb < cbFullPathMax + 1);
SendDlgItemMessage(hdlg, IDC_EDIT, EM_LIMITTEXT, cbFullPathMax, 0L);
SetDlgItemText(hdlg, IDC_EDIT, (LPSTR)szSymBuf);
cbLen = lstrlen(szSymBuf);
cb = CbGetSymbolValue("EditFocus", szSymBuf, cbFullPathMax + 1);
Assert(cb < cbFullPathMax + 1);
if (lstrcmp(szSymBuf, "ALL") == 0)
{
wSelStart = 0;
wSelEnd = INT_MAX;
}
else if (lstrcmp(szSymBuf, "START") == 0)
{
wSelStart = 0;
wSelEnd = 0;
}
else /* default == END */
{
wSelStart = (WORD)cbLen;
wSelEnd = (WORD)cbLen;
}
return(fTrue);
case STF_REINITDIALOG:
SendDlgItemMessage(hdlg, IDC_EDIT, EM_SETSEL, 0, MAKELONG(256, 256));
SetFocus(GetDlgItem(hdlg, IDC_EDIT));
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
case IDC_EDIT:
if (HIWORD(lParam) == EN_SETFOCUS)
SendDlgItemMessage(hdlg, IDC_EDIT, EM_SETSEL, 0,
MAKELONG(wSelStart, wSelEnd));
else if (HIWORD(lParam) == EN_KILLFOCUS)
{
LONG l = SendDlgItemMessage(hdlg, IDC_EDIT, EM_GETSEL, 0, 0L);
wSelStart = LOWORD(l);
wSelEnd = HIWORD(l);
}
break;
case IDC_B1:
case IDC_B2:
case IDC_B3:
case IDC_B4:
case IDC_B5:
case IDC_B6:
case IDC_B7:
case IDC_B8:
case IDC_B9:
case IDC_B10:
lstrcpy((LPSTR)rgchChk, "CHK");
IntToAscii((int)(wParam-IDC_B1+1), (LPSTR)(&rgchChk[3]));
szEvent = (LPSTR)rgchChk;
FRemoveSymbol("InnerChkItemsState");
for (idc = IDC_B1; GetDlgItem(hdlg, idc); idc++)
if (!FAddListItem("InnerChkItemsState",
IsDlgButtonChecked(hdlg, idc) ? "ON" : "OFF"))
{
DestroyWindow(GetParent(hdlg));
return(fFalse);
}
Assert((unsigned)(idc-IDC_B1+1) <= iszBMax);
if (szEvent != (LPSTR)NULL)
if (!FSetSymbolValue("DLGEVENT", szEvent))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
SendDlgItemMessage(hdlg, IDC_EDIT, (WORD)WM_GETTEXT,
cbFullPathMax + 1, (LONG)((LPSTR)rgchText));
if (!FSetSymbolValue("EditTextOut", rgchText))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Help Dialog procedure.
**
** Controls Recognized:
** Pushbutton - IDC_X.
**
** Initialization Symbols:
** none.
**
** Termination Symbols:
** none. (Handles IDC_X and IDCANCEL events by calling FCloseHelp.)
**
** Note:
** This dialog proc is for Help dialogs ONLY (szHelpProc$ parameter
** of UIStartDlg) and CANNOT be used as the szDlgProc$ parameter
** of the UIStartDlg MSSetup script function.
**
*****************************************************************************/
BOOL FAR PASCAL FHelpDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
switch (wMsg)
{
case WM_INITDIALOG:
return(fTrue);
case STF_REINITDIALOG:
return(fTrue);
case STF_ACTIVATEAPP:
/* Help dlg should not be on the dlg stack
** and should never get this message.
*/
Assert(fFalse);
return(fTrue);
case WM_COMMAND:
if (wParam != IDC_X
&& wParam != IDCANCEL)
break;
FCloseHelp();
return(fTrue);
}
return(fFalse);
}
/*
** Purpose:
** Information Dialog procedure.
**
** Controls Recognized:
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** none.
**
** Termination Symbols:
** "DLGEVENT" - one of the following, according to control event:
** event value
** ------- -------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FInfoDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
switch (wMsg)
{
case WM_INITDIALOG:
return(fTrue);
case STF_REINITDIALOG:
case STF_ACTIVATEAPP:
return(fTrue);
case WM_COMMAND:
switch (wParam)
{
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Information Dialog procedure, without "Exit" button.
**
** Controls Recognized:
** Pushbutton - IDC_B, IDC_C, IDC_H
**
** Initialization Symbols:
** none.
**
** Termination Symbols:
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FInfo0DlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
switch (wMsg)
{
case WM_INITDIALOG:
return(fTrue);
case STF_REINITDIALOG:
return(fTrue);
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case WM_COMMAND:
switch (wParam)
{
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDCANCEL:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Single Choice Listbox Dialog procedure for templates with exactly one
** listbox control.
**
** Controls Recognized:
** Listbox - IDC_LIST1
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** "ListItemsIn" - list of strings to put in the listbox.
** "ListItemsOut" - simple string (not a list) representing an
** initial selection in "ListItemsIn".
**
** Termination Symbols:
** "ListItemsOut" - selected list item string.
** "DLGEVENT" - one of the following, according to control event:
** event value
** ------- -------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FListDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
char szListIn[cbSymBuf];
char szListOut[cbSymBuf];
WORD iItem;
WORD cb, i;
WORD cItems;
switch (wMsg)
{
case WM_INITDIALOG:
cItems = UsGetListLength("ListItemsIn");
for (i = 1; i <= cItems; ++i)
{
cb = CbGetListItem("ListItemsIn", i, szListIn, cbSymBuf);
Assert(cb < cbSymBuf);
SendDlgItemMessage(hdlg, IDC_LIST1, LB_ADDSTRING, 0,
(LONG)(LPSTR)szListIn);
}
cb = CbGetSymbolValue("ListItemsOut", szListOut, cbSymBuf);
Assert(cb < cbSymBuf);
if (cb == 0)
SendDlgItemMessage(hdlg, IDC_LIST1, LB_SETCURSEL, (WORD)-1, 0L);
else
{
for (i = 1, iItem = 0; i <= cItems; ++i, ++iItem)
{
cb = CbGetListItem("ListItemsIn", i, szListIn, cbSymBuf);
Assert(cb < cbSymBuf);
if (lstrcmp(szListOut, szListIn) == 0)
{
SendDlgItemMessage(hdlg,IDC_LIST1,LB_SETCURSEL,iItem,0L);
break;
}
}
}
/* Note: Depends on number of lines in list box.
*/
if (iItem < 4)
iItem = 0;
SendDlgItemMessage(hdlg, IDC_LIST1, LB_SETTOPINDEX, iItem, 0L);
return(fTrue);
case STF_REINITDIALOG:
case STF_ACTIVATEAPP:
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_LIST1:
if (HIWORD(lParam) != LBN_DBLCLK)
break;
wParam = IDC_C;
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
if ((iItem = (WORD)SendDlgItemMessage(hdlg, IDC_LIST1, LB_GETCURSEL,
0, 0L)) == LB_ERR
|| (cb = (WORD)SendDlgItemMessage(hdlg, IDC_LIST1,
LB_GETTEXTLEN, iItem, 0L)) == LB_ERR)
*szListOut = '\0';
else
{
Assert(cb <= cbSymBuf);
SendDlgItemMessage(hdlg, IDC_LIST1, LB_GETTEXT, iItem,
(LONG)(LPSTR)szListOut);
}
if (!FSetSymbolValue("ListItemsOut", szListOut))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Modeless Dialog procedure.
**
** Controls Recognized:
** none.
**
** Initialization Symbols:
** none.
**
** Termination Symbols:
** none.
**
** Note:
** This dialog procedure is REQUIRED with use of any Billboard
** MSSetup script functions.
**
*****************************************************************************/
BOOL FAR PASCAL FModelessDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
switch (wMsg)
{
case WM_INITDIALOG:
ReactivateSetupScript();
return(fTrue);
case STF_REINITDIALOG:
case STF_ACTIVATEAPP:
return(fTrue);
case WM_CLOSE:
case WM_COMMAND:
Assert(fFalse);
break;
}
return(fFalse);
}
/*
** Purpose:
** Multiple Choice Listbox Dialog procedure for templates with
** exactly one listbox control.
**
** Controls Recognized:
** Listbox - IDC_LIST1
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_L, IDC_S, IDC_X
**
** Initialization Symbols:
** "ListItemsIn" - list of strings to put in the listbox.
** "ListItemsOut" - list of strings representing initial
** selections in "ListItemsIn".
**
** Termination Symbols:
** "ListItemsOut" - list of items selected (if any).
** "DLGEVENT" - one of the following, according to control event:
** event value
** ------- -------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
** Pushbuttons IDC_L and IDC_S are for "clear all" and "select all"
** respectively.
**
*****************************************************************************/
BOOL FAR PASCAL FMultiDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
WORD i, j, nCount;
char szListIn[cbSymBuf];
char szListOut[cbSymBuf];
WORD iItem, iItemTop;
WORD cb;
WORD cItemsIn, cItemsOut;
switch (wMsg)
{
case WM_INITDIALOG:
cItemsIn = UsGetListLength("ListItemsIn");
nCount = 0;
for (i = 1; i <= cItemsIn; ++i)
{
cb = CbGetListItem("ListItemsIn", i, szListIn, cbSymBuf);
Assert(cb < cbSymBuf);
SendDlgItemMessage(hdlg, IDC_LIST1, LB_ADDSTRING, 0,
(LONG)(LPSTR)szListIn);
nCount++;
}
Assert(nCount == (WORD)SendDlgItemMessage(hdlg, IDC_LIST1, LB_GETCOUNT,
0, 0L));
cItemsOut = UsGetListLength("ListItemsOut");
for (i = 1, iItemTop = 0; i <= cItemsOut; ++i, ++iItemTop)
{
cb = CbGetListItem("ListItemsOut", i, szListOut, cbSymBuf);
Assert(cb < cbSymBuf);
for (j = 1, iItem = 0; j <= cItemsIn; ++j, ++iItem)
{
cb = CbGetListItem("ListItemsIn", j, szListIn, cbSymBuf);
Assert(cb < cbSymBuf);
if (lstrcmp(szListOut, szListIn) == 0)
{
SendDlgItemMessage(hdlg, IDC_LIST1, LB_SETSEL, 1,
MAKELONG(iItem, 0));
if (iItemTop == 0
|| (WORD)iItem < iItemTop)
iItemTop = (WORD)iItem;
break;
}
}
}
/* Note: Depends on number of lines in list box.
*/
if (iItemTop < 4)
iItemTop = 0;
SendDlgItemMessage(hdlg, IDC_LIST1, LB_SETTOPINDEX, iItemTop, 0L);
return(fTrue);
case STF_REINITDIALOG:
case STF_ACTIVATEAPP:
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
case IDC_S:
case IDC_L:
SendDlgItemMessage(hdlg, IDC_LIST1, LB_SETSEL, (wParam == IDC_S),
-1L);
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
/* Note: Could be faster to use LB_GETSELITEMS here.
*/
nCount = (WORD)SendDlgItemMessage(hdlg, IDC_LIST1, LB_GETCOUNT, 0,
0L);
FRemoveSymbol("ListItemsOut");
for (i = 0; i < nCount; i++)
{
if (SendDlgItemMessage(hdlg, IDC_LIST1, LB_GETSEL, (WORD)i, 0L))
{
SendDlgItemMessage(hdlg, IDC_LIST1, LB_GETTEXT, (WORD)i,
(LONG)(LPSTR)szListOut);
if (!FAddListItem("ListItemsOut", szListOut))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
}
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Quit Dialog procedure.
**
** Controls Recognized:
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** none.
**
** Termination Symbols:
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FQuitDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
switch (wMsg)
{
case WM_INITDIALOG:
return(fTrue);
case STF_REINITDIALOG:
return(fTrue);
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Radio Button Group Dialog procedure for templates with one group
** of one to ten radio button controls.
**
** Controls Recognized:
** Radio - IDC_B1 to IDC_B10 (sequential)
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** "RadioDefault" - index (one-based) of radio button to be
** initialized as selected (default is "1").
** "OptionsGreyed" - list of (one-based) indexes of radio buttons
** to be initialized as disabled. Indexes not in the list will
** be left enabled.
**
** Termination Symbols:
** "ButtonChecked" - index of currently selected radio button.
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
** STF_ACTIVATEAPP "REACTIVATE"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FRadioDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
char rgchNum[10];
int iButtonChecked;
char szSymBuf[cbSymBuf];
WORD i, cb, cItems, idc;
switch (wMsg)
{
case STF_ACTIVATEAPP:
if (!FSetSymbolValue("DLGEVENT", "REACTIVATE"))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
return(fTrue);
case WM_INITDIALOG:
cb = CbGetSymbolValue("RadioDefault", szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
if (*szSymBuf != '\0')
{
iButtonChecked = AsciiToInt((LPSTR)szSymBuf);
if (iButtonChecked < 1)
iButtonChecked = 0;
if (iButtonChecked > 10)
iButtonChecked = 10;
}
else
iButtonChecked = 1;
if (iButtonChecked != 0)
SendDlgItemMessage(hdlg, IDC_B0 + iButtonChecked, BM_SETCHECK,1,0L);
cItems = UsGetListLength("OptionsGreyed");
idc = IDC_B1;
for (i = 1; i <= cItems; ++i)
{
int iOpt;
cb = CbGetListItem("OptionsGreyed", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
iOpt = AsciiToInt((LPSTR)szSymBuf);
if (iOpt > 0
&& iOpt <= 10
&& iOpt != iButtonChecked)
EnableWindow(GetDlgItem(hdlg, IDC_B0 + iOpt), 0);
else if (*szSymBuf != '\0')
Assert(fFalse);
}
return(fTrue);
case STF_REINITDIALOG:
return(fTrue);
case WM_COMMAND:
switch (wParam)
{
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B1:
case IDC_B2:
case IDC_B3:
case IDC_B4:
case IDC_B5:
case IDC_B6:
case IDC_B7:
case IDC_B8:
case IDC_B9:
case IDC_B10:
CheckRadioButton(hdlg, IDC_B1, IDC_B10, wParam);
if (HIWORD(lParam) != BN_DOUBLECLICKED)
break;
wParam = IDC_C;
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
iButtonChecked = 0;
for (i = 1; i <= 10; i++)
if (SendDlgItemMessage(hdlg, IDC_B0 + i, BM_GETCHECK, 0, 0L))
{
iButtonChecked = i;
break;
}
IntToAscii((int)iButtonChecked, (LPSTR)rgchNum);
if (!FSetSymbolValue("ButtonChecked", rgchNum))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Get Name and Organization Dialog procedure for templates
** with two Edit controls.
** (Limits the input string length to cbNameMax characters.)
**
** Controls Recognized:
** Edit - IDC_EDIT, IDC_EDIT2
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** none.
**
** Termination Symbols:
** "NameOut" - text in the IDC_EDIT edit control upon termination.
** "OrgOut" - text in the IDC_EDIT2 edit control upon termination.
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FNameOrgDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
static WORD wSelStart1 = 0;
static WORD wSelEnd1 = 0;
static WORD wSelStart2 = 0;
static WORD wSelEnd2 = 0;
char rgchText[cbNameMax + 1];
switch (wMsg)
{
case WM_INITDIALOG:
SendDlgItemMessage(hdlg, IDC_EDIT, EM_LIMITTEXT, cbNameMax, 0L);
SetDlgItemText(hdlg, IDC_EDIT, (LPSTR)"");
SendDlgItemMessage(hdlg, IDC_EDIT2, EM_LIMITTEXT, cbNameMax, 0L);
SetDlgItemText(hdlg, IDC_EDIT2, (LPSTR)"");
wSelStart1 = wSelEnd1 = 0;
wSelStart2 = wSelEnd2 = 0;
return(fTrue);
case STF_REINITDIALOG:
SendDlgItemMessage(hdlg, IDC_EDIT, EM_SETSEL, 0, MAKELONG(256, 256));
SetFocus(GetDlgItem(hdlg, IDC_EDIT));
return(fTrue);
case STF_ACTIVATEAPP:
return(fTrue);
case WM_COMMAND:
switch(wParam)
{
case IDC_EDIT:
if (HIWORD(lParam) == EN_SETFOCUS)
SendDlgItemMessage(hdlg, IDC_EDIT, EM_SETSEL, 0,
MAKELONG(wSelStart1, wSelEnd1));
else if (HIWORD(lParam) == EN_KILLFOCUS)
{
LONG l = SendDlgItemMessage(hdlg, IDC_EDIT, EM_GETSEL, 0, 0L);
wSelStart1 = LOWORD(l);
wSelEnd1 = HIWORD(l);
}
break;
case IDC_EDIT2:
if (HIWORD(lParam) == EN_SETFOCUS)
SendDlgItemMessage(hdlg, IDC_EDIT2, EM_SETSEL, 0,
MAKELONG(wSelStart2, wSelEnd2));
else if (HIWORD(lParam) == EN_KILLFOCUS)
{
LONG l = SendDlgItemMessage(hdlg, IDC_EDIT2, EM_GETSEL, 0, 0L);
wSelStart2 = LOWORD(l);
wSelEnd2 = HIWORD(l);
}
break;
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
SendDlgItemMessage(hdlg, IDC_EDIT, (WORD)WM_GETTEXT,
cbNameMax + 1, (LONG)((LPSTR)rgchText));
if (!FSetSymbolValue("NameOut", rgchText))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
SendDlgItemMessage(hdlg, IDC_EDIT2, (WORD)WM_GETTEXT,
cbNameMax + 1, (LONG)((LPSTR)rgchText));
if (!FSetSymbolValue("OrgOut", rgchText))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Confirm Info Dialog procedure for templates with one to
** static text controls.
**
** Controls Recognized:
** Text - IDC_TEXT1 to IDC_TEXT10 (sequential)
** Pushbutton - IDC_B, IDC_C, IDC_H, IDC_X
**
** Initialization Symbols:
** "ConfirmTextIn" - list of up to ten string items to initialize
** static text items (IDC_TEXT1-10).
**
** Termination Symbols:
** "DLGEVENT" - one of the following, depending on event:
** event value
** ---------- ----------
** IDC_B "BACK"
** IDC_C "CONTINUE"
** IDC_X "EXIT"
** IDCANCEL "CANCEL"
**
** Note:
** Pushbutton IDC_H will open the related Help dialog, if any.
**
*****************************************************************************/
BOOL FAR PASCAL FConfirmDlgProc(HWND hdlg, WORD wMsg, WORD wParam, LONG lParam)
{
WORD idc;
WORD cItems;
WORD i, cb;
char szSymBuf[cbSymBuf];
switch (wMsg)
{
case WM_INITDIALOG:
cItems = UsGetListLength("ConfirmTextIn");
idc = IDC_TEXT1;
for (i = 1; i <= cItems; ++i)
{
WORD wCheck = 0;
cb = CbGetListItem("ConfirmTextIn", i, szSymBuf, cbSymBuf);
Assert(cb < cbSymBuf);
SetDlgItemText(hdlg, idc++, szSymBuf);
if (i >= 4
&& i <= 6)
{
if (*szSymBuf == '\0')
ShowWindow(GetDlgItem(hdlg, IDC_TEXT4+i), SW_HIDE);
else
ShowWindow(GetDlgItem(hdlg, IDC_TEXT4+i), SW_SHOWNOACTIVATE);
}
}
return(fTrue);
case STF_REINITDIALOG:
case STF_ACTIVATEAPP:
return(fTrue);
case WM_COMMAND:
switch (wParam)
{
case IDC_H:
HdlgShowHelp();
return(fTrue);
case IDC_B:
case IDC_C:
case IDC_X:
if (!FSetSymbolValue("DLGEVENT", SzDlgEvent(wParam)))
{
DestroyWindow(GetParent(hdlg));
return(fTrue);
}
ReactivateSetupScript();
break;
}
break;
}
return(fFalse);
}
/*
** Purpose:
** Initialization routine for DLL.
** Arguments:
** hInst: handle to instance of App that required this DLL.
** wDataSeg: number of words in DLL's data segment.
** wHeapSize: number of bytes in DLL's heap.
** lpszCmdLine: command line for App that required this DLL.
** Returns:
** 1 always
*****************************************************************************/
int FAR PASCAL LibMain(HANDLE hInst, WORD wDataSeg, WORD wHeapSize,
LPSTR lpszCmdLine)
{
if (wHeapSize > 0)
UnlockData(0);
return(1);
}
/*
** Purpose:
** Windows Exit Procedure.
** Arguments:
** nParam: standard WEP param (ignored).
** Returns:
** 1 always.
*****************************************************************************/
int FAR PASCAL WEP (int nParam)
{
return(1);
}
/*
** Purpose:
** Finds the last character in a string.
** Arguments:
** sz: non-NULL zero terminated string to search.
** Returns:
** NULL for an empty string.
** non-Null string pointer to the last valid character in sz.
*****************************************************************************/
LPSTR FAR PASCAL SzLastChar(LPSTR sz)
{
LPSTR szCur = (LPSTR)NULL;
LPSTR szNext = sz;
while (*szNext != '\0')
szNext = AnsiNext((szCur = szNext));
return(szCur);
}
/*
** Purpose:
** Gets the string values for the following WM_COMMAND events:
** IDC_B, IDC_C, IDC_X, and IDCANCEL.
** Arguments:
** wParam: event parameter value
** Returns:
** Pointer to string value constant, NULL if unknown event.
*****************************************************************************/
LPSTR FAR PASCAL SzDlgEvent(WORD wParam)
{
LPSTR szEvent;
switch(wParam)
{
case IDC_B:
szEvent = "BACK";
break;
case IDC_C:
szEvent = "CONTINUE";
break;
case IDC_X:
szEvent = "EXIT";
break;
default:
szEvent = NULL;
break;
}
return(szEvent);
}
/*
** Purpose:
** Converts an ASCII string representing a positive value
** into an integer.
** Arguments:
** sz: non-NULL zero terminated string to convert.
** Returns:
** Integer represented by the string.
*****************************************************************************/
int FAR PASCAL AsciiToInt(LPSTR sz)
{
int i = 0;
while (*sz == ' ' || *sz == '\t')
sz++;
while (isdigit(*sz))
i = (i * 10) + *sz++ - '0';
return(i);
}
/*
** Purpose:
** Converts an positive integer (< 100) into a string
** representing its value.
** Arguments:
** i: integer to convert (positive and < 100).
** sz: buffer to hold converted string (at least 3 bytes).
** Returns:
** sz.
*****************************************************************************/
LPSTR FAR PASCAL IntToAscii(int i, LPSTR sz)
{
LPSTR szSav = sz;
if (i >= 100
|| i < 0)
Assert(fFalse);
if (i >= 10)
{
*sz++ = (char)('0' + (i / 10));
i %= 10;
}
*sz++ = (char)('0' + i);
*sz = '\0';
return(szSav);
}
