1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
|
/*
This is an example sketch to show the use of the espFTP server.
Please replace
YOUR_SSID and YOUR_PASS
with your WiFi's values and compile.
If you want to see debugging output of the FTP server, please
select select an Serial Port in the Arduino IDE menu Tools->Debug Port
Send L via Serial Monitor, to display the contents of the FS
Send F via Serial Monitor, to fromat the FS
This example is provided as Public Domain
Daniel Plasa <dplasa@gmail.com>
*/
#ifdef ESP8266
#include <ESP8266WiFi.h>
#elif defined ESP32
#include <WiFi.h>
#endif
#include <LittleFS.h>
#include <espFtpServer.h>
const char *ssid PROGMEM = "YOUR_SSID";
const char *password PROGMEM = "YOUR_PASS";
// tell the FtpServer to use LittleFS
FtpServer ftpSrv(LittleFS);
void setup(void)
{
Serial.begin(74880);
WiFi.begin(ssid, password);
bool fsok = LittleFS.begin();
Serial.printf_P(PSTR("FS init: %S\n"), fsok ? PSTR("ok") : PSTR("fail!"));
// Wait for connection
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Serial.printf_P(PSTR("."));
}
Serial.printf_P(PSTR("\nConnected to %S, IP address is %s\n"), ssid, WiFi.localIP().toString().c_str());
// setup the ftp server with username and password
// ports are defined in esFTP.h, default is
// 21 for the control connection
// 50009 for the data connection (passive mode by default)
ftpSrv.begin(F("ftp"), F("ftp")); //username, password for ftp. set ports in ESP8266FtpServer.h (default 21, 50009 for PASV)
}
enum consoleaction
{
show,
wait,
format,
list
};
consoleaction action = show;
void loop(void)
{
// this is all you need
// make sure to call handleFTP() frequently
ftpSrv.handleFTP();
//
// Code below just to debug in Serial Monitor
//
if (action == show)
{
Serial.printf_P(PSTR("Enter 'F' to format, 'L' to list the contents of the FS\n"));
action = wait;
}
else if (action == wait)
{
if (Serial.available())
{
char c = Serial.read();
if (c == 'F')
action = format;
else if (c == 'L')
action = list;
else if (!(c == '\n' || c == '\r'))
action = show;
}
}
else if (action == format)
{
uint32_t startTime = millis();
LittleFS.format();
Serial.printf_P(PSTR("FS format done, took %lu ms!\n"), millis() - startTime);
action = show;
}
else if (action == list)
{
Serial.printf_P(PSTR("Listing contents...\n"));
uint16_t fileCount = listDir("", "/");
Serial.printf_P(PSTR("%d files/dirs total\n"), fileCount);
action = show;
}
}
uint16_t listDir(String indent, String path)
{
uint16_t dirCount = 0;
Dir dir = LittleFS.openDir(path);
while (dir.next())
{
++dirCount;
if (dir.isDirectory())
{
Serial.printf_P(PSTR("%s%s [Dir]\n"), indent.c_str(), dir.fileName().c_str());
dirCount += listDir(indent + " ", path + dir.fileName() + "/");
}
else
Serial.printf_P(PSTR("%s%-16s (%ld Bytes)\n"), indent.c_str(), dir.fileName().c_str(), (uint32_t)dir.fileSize());
}
return dirCount;
}
|
