summaryrefslogtreecommitdiffstats
path: root/02.-Direction-Finding-Quickstart-Guide.md
diff options
context:
space:
mode:
authorkrakenrf <78108016+krakenrf@users.noreply.github.com>2023-10-05 00:20:13 +0200
committerkrakenrf <78108016+krakenrf@users.noreply.github.com>2023-10-05 00:20:13 +0200
commitce2cfb7b0060abd24d57fcc1424e30c9163890b5 (patch)
tree81c91486d982550f73ee9a0e05bd7a4ad054f88b /02.-Direction-Finding-Quickstart-Guide.md
parentUpdated 02. Direction Finding Quickstart Guide (markdown) (diff)
downloadkrakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.tar
krakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.tar.gz
krakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.tar.bz2
krakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.tar.lz
krakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.tar.xz
krakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.tar.zst
krakensdr_docs.wiki-ce2cfb7b0060abd24d57fcc1424e30c9163890b5.zip
Diffstat (limited to '02.-Direction-Finding-Quickstart-Guide.md')
-rw-r--r--02.-Direction-Finding-Quickstart-Guide.md4
1 files changed, 2 insertions, 2 deletions
diff --git a/02.-Direction-Finding-Quickstart-Guide.md b/02.-Direction-Finding-Quickstart-Guide.md
index 84766cd..840592d 100644
--- a/02.-Direction-Finding-Quickstart-Guide.md
+++ b/02.-Direction-Finding-Quickstart-Guide.md
@@ -28,8 +28,6 @@ You may wish to use our antenna spacing template which will help with accurate a
Files for 3D printing and paper printing can be found in this repo at https://github.com/krakenrf/krakensdr_docs/tree/main/antenna_array
-We can also recommend an alternative 3D printed spacer made by a customer on Thingiverse: https://www.thingiverse.com/thing:5787042
-
For both templates print the center pentagon and five arms separately, then glue them together. PAPER PRINTING NOTE: Please ensure that you DO NOT have any printer scaling turned on. The templates fit on a standard A4 paper.
**Each hole is spaced at 50mm radius intervals.** So you have radius spacings of 100mm, 150mm, 200mm, and 250mm. These spacings cover the following frequency range:
@@ -39,6 +37,8 @@ For both templates print the center pentagon and five arms separately, then glue
* 200mm : 255 - 637 MHz
* 250mm : 204 - 510 MHz
+Alternatively, we can also recommend an alternative 3D printed antenna spacer made by a customer on Thingiverse: https://www.thingiverse.com/thing:5787042
+
## Mount the antennas
The image below explains how the antennas should be mounted. Make sure the array is as straight as possible. ANT-0 must connect to CH-0 on the KrakenSDR. ANT-1 must connect to CH-1 and so on.