From 4b960e8261bdda0c9043e003e4f2896f584ff2d1 Mon Sep 17 00:00:00 2001 From: "Wolfgang (Wolle) Ewald" Date: Thu, 18 Feb 2021 23:31:01 +0100 Subject: Add files via upload --- examples/Auto_Range/Auto_Range.ino | 187 +++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100644 examples/Auto_Range/Auto_Range.ino (limited to 'examples') diff --git a/examples/Auto_Range/Auto_Range.ino b/examples/Auto_Range/Auto_Range.ino new file mode 100644 index 0000000..5cef117 --- /dev/null +++ b/examples/Auto_Range/Auto_Range.ino @@ -0,0 +1,187 @@ +/*************************************************************************** +* Example sketch for the ADS1115_WE library +* +* This sketch shows how to use the Auto Range function of the AD1115_WE library. +* +* Further information can be found on: +* https://wolles-elektronikkiste.de/ads1115 (German) +* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English) +* +***************************************************************************/ + +#include +#include +#define I2C_ADDRESS 0x48 + +ADS1115_WE adc(I2C_ADDRESS); +// ADS1115_WE adc = ADS1115_WE(); // Alternative: uses default address 0x48 + +void setup() { + Wire.begin(); + Serial.begin(9600); + if(!adc.init()){ + Serial.println("ADS1115 not connected!"); + } + + /* Set the voltage range of the ADC to adjust the gain + * Please note that you must not apply more than VDD + 0.3V to the input pins! + * + * ADS1115_RANGE_6144 -> +/- 6144 mV + * ADS1115_RANGE_4096 -> +/- 4096 mV + * ADS1115_RANGE_2048 -> +/- 2048 mV (default) + * ADS1115_RANGE_1024 -> +/- 1024 mV + * ADS1115_RANGE_0512 -> +/- 512 mV + * ADS1115_RANGE_0256 -> +/- 256 mV + */ + adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range + + /* Set the inputs to be compared + * + * ADS1115_COMP_0_1 -> compares 0 with 1 (default) + * ADS1115_COMP_0_3 -> compares 0 with 3 + * ADS1115_COMP_1_3 -> compares 1 with 3 + * ADS1115_COMP_2_3 -> compares 2 with 3 + * ADS1115_COMP_0_GND -> compares 0 with GND + * ADS1115_COMP_1_GND -> compares 1 with GND + * ADS1115_COMP_2_GND -> compares 2 with GND + * ADS1115_COMP_3_GND -> compares 3 with GND + */ + adc.setCompareChannels(ADS1115_COMP_0_GND); //comment line/change parameter to change channel + + /* Set number of conversions after which the alert pin asserts + * - or you can disable the alert + * + * ADS1115_ASSERT_AFTER_1 -> after 1 conversion + * ADS1115_ASSERT_AFTER_2 -> after 2 conversions + * ADS1115_ASSERT_AFTER_4 -> after 4 conversions + * ADS1115_DISABLE_ALERT -> disable comparator / alert pin (default) + */ + //adc.setAlertPinMode(ADS1115_ASSERT_AFTER_1); //uncomment if you want to change the default + + /* Set the conversion rate in SPS (samples per second) + * Options should be self-explaining: + * + * ADS1115_8_SPS + * ADS1115_16_SPS + * ADS1115_32_SPS + * ADS1115_64_SPS + * ADS1115_128_SPS (default) + * ADS1115_250_SPS + * ADS1115_475_SPS + * ADS1115_860_SPS + */ + adc.setConvRate(ADS1115_64_SPS); //uncomment if you want to change the default + + /* Set continuous or single shot mode: + * + * ADS1115_CONTINUOUS -> continuous mode + * ADS1115_SINGLE -> single shot mode (default) + */ + adc.setMeasureMode(ADS1115_CONTINUOUS); //comment line/change parameter to change mode + + /* Choose maximum limit or maximum and minimum alert limit (window) in Volt - alert pin will + * assert when measured values are beyond the maximum limit or outside the window + * Upper limit first: setAlertLimit_V(MODE, maximum, minimum) + * In max limit mode the minimum value is the limit where the alert pin assertion will be + * cleared (if not latched) + * + * ADS1115_MAX_LIMIT + * ADS1115_WINDOW + * + */ + //adc.setAlertModeAndLimit_V(ADS1115_MAX_LIMIT, 3.0, 1.5); //uncomment if you want to change the default + + /* Enable or disable latch. If latch is enabled the alert pin will assert until the + * conversion register is read (getResult functions). If disabled the alert pin assertion will be + * cleared with next value within limits. + * + * ADS1115_LATCH_DISABLED (default) + * ADS1115_LATCH_ENABLED + */ + //adc.setAlertLatch(ADS1115_LATCH_ENABLED); //uncomment if you want to change the default + + /* Sets the alert pin polarity if active: + * + * ADS1115_ACT_LOW -> active low (default) + * ADS1115_ACT_HIGH -> active high + */ + //adc.setAlertPol(ADS1115_ACT_LOW); //uncomment if you want to change the default + + /* With this function the alert pin will assert, when a conversion is ready. + * In order to deactivate, use the setAlertLimit_V function + */ + //adc.setAlertPinToConversionReady(); //uncomment if you want to change the default + + Serial.println("ADS1115 Example Sketch - Continuous Mode with Auto Range"); + Serial.println(); +} + +void loop() { + float voltage = 0.0; + + Serial.print("Channel 0 - "); + voltage = readChannel(ADS1115_COMP_0_GND); + Serial.println(voltage); + + Serial.print("Channel 1 - "); + voltage = readChannel(ADS1115_COMP_1_GND); + Serial.println(voltage); + + Serial.print("Channel 2 - "); + voltage = readChannel(ADS1115_COMP_2_GND); + Serial.println(voltage); + + Serial.print("Channel 3 - "); + voltage = readChannel(ADS1115_COMP_3_GND); + Serial.println(voltage); + + Serial.println("-------------------------------"); + delay(1000); +} + +float readChannel(ADS1115_MUX channel) { + float voltage = 0.0; + adc.setCompareChannels(channel); + + /* setAutoRange() switches to the highest range (+/- 6144 mV), measures the current + * voltage and then switches to the lowest range where the current value is still + * below 80% of the maximum value of the range. The function is only suitable if you + * expect stable or slowly changing voltages. setAutoRange needs roughly the time you + * would need for three conversions. + * If the ADS115 is in single shot mode, setAutoRange() will switch into continuous + * mode to measure a value and switch back again. + */ + adc.setAutoRange(); + printVoltageRange(); // this is just to show that the range is changing with changing voltages + adc.getResult_mV(); + voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt + return voltage; +} + +void printVoltageRange(){ + unsigned int voltageRange = adc.getVoltageRange_mV(); + Serial.print("Range: "); + + switch(voltageRange){ + case 6144: + Serial.print("+/- 6144 mV, Voltage [mV]: "); + break; + case 4096: + Serial.print("+/- 4096 mV, Voltage [mV]: "); + break; + case 2048: + Serial.print("+/- 2048 mV, Voltage [mV]: "); + break; + case 1024: + Serial.print("+/- 1024 mV, Voltage [mV]: "); + break; + case 512: + Serial.print("+/- 512 mV, Voltage [mV]: "); + break; + case 256: + Serial.print("+/- 256 mV, Voltage [mV]: "); + break; + default: + Serial.println("Something went wrong"); + } +} -- cgit v1.2.3