1 files changed, 0 insertions, 145 deletions

diff --git a/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino b/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino
deleted file mode 100644
index e29e7fb..0000000
--- a/examples/Single_Shot_Conv_Ready_Alert_Controlled/Single_Shot_Conv_Ready_Alert_Controlled.ino
+++ /dev/null
@@ -1,145 +0,0 @@
-/***************************************************************************

-* Example sketch for the ADS1115_WE library

-*

-* This sketch shows how you can use the alert pin as conversion ready alert pin.

-* Please note that you need to enable the alert pin with setAlertPinMode. Choose any 

-* parameter except ADS1115_DISABLE_ALERT.

-*  

-* Further information can be found on:

-* https://wolles-elektronikkiste.de/ads1115 (German)

-* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English)

-* 

-***************************************************************************/

-

-#include<ADS1115_WE.h> 

-#include<Wire.h>

-#define I2C_ADDRESS 0x48

-int interruptPin = 2;

-volatile bool convReady = false;

-

-ADS1115_WE adc(I2C_ADDRESS);

-// ADS1115_WE adc = ADS1115_WE(); // Alternative: uses default address 0x48

-

-void setup() {

-  Wire.begin();

-  Serial.begin(9600);

-  pinMode(interruptPin, INPUT_PULLUP);

-  if(!adc.init()){

-    Serial.println("ADS1115 not connected!");

-  }

-

-  /* Set the voltage range of the ADC to adjust the gain

-   * Please note that you must not apply more than VDD + 0.3V to the input pins!

-   * 

-   * ADS1115_RANGE_6144  ->  +/- 6144 mV

-   * ADS1115_RANGE_4096  ->  +/- 4096 mV

-   * ADS1115_RANGE_2048  ->  +/- 2048 mV (default)

-   * ADS1115_RANGE_1024  ->  +/- 1024 mV

-   * ADS1115_RANGE_0512  ->  +/- 512 mV

-   * ADS1115_RANGE_0256  ->  +/- 256 mV

-   */

-  adc.setVoltageRange_mV(ADS1115_RANGE_6144); //comment line/change parameter to change range

-

-  /* Set the inputs to be compared

-   *  

-   *  ADS1115_COMP_0_1    ->  compares 0 with 1 (default)

-   *  ADS1115_COMP_0_3    ->  compares 0 with 3

-   *  ADS1115_COMP_1_3    ->  compares 1 with 3

-   *  ADS1115_COMP_2_3    ->  compares 2 with 3

-   *  ADS1115_COMP_0_GND  ->  compares 0 with GND

-   *  ADS1115_COMP_1_GND  ->  compares 1 with GND

-   *  ADS1115_COMP_2_GND  ->  compares 2 with GND

-   *  ADS1115_COMP_3_GND  ->  compares 3 with GND

-   */

-  adc.setCompareChannels(ADS1115_COMP_0_GND); //comment line/change parameter to change channels

-

-  /* Set number of conversions out of limit after which the alert pin will assert

-   * - or you can disable the alert (including conversion ready alert)

-   *  

-   *  ADS1115_ASSERT_AFTER_1  -> after 1 conversion

-   *  ADS1115_ASSERT_AFTER_2  -> after 2 conversions

-   *  ADS1115_ASSERT_AFTER_4  -> after 4 conversions

-   *  ADS1115_DISABLE_ALERT   -> disable comparator / alert pin (default) 

-   */

-  adc.setAlertPinMode(ADS1115_ASSERT_AFTER_1); //needed in this sketch to enable alert pin (doesn't matter if you choose after 1,2 or 4)

-

-  /* Set the conversion rate in SPS (samples per second)

-   * Options should be self-explaining: 

-   * 

-   *  ADS1115_8_SPS 

-   *  ADS1115_16_SPS  

-   *  ADS1115_32_SPS 

-   *  ADS1115_64_SPS  

-   *  ADS1115_128_SPS (default)

-   *  ADS1115_250_SPS 

-   *  ADS1115_475_SPS 

-   *  ADS1115_860_SPS 

-   */

-  adc.setConvRate(ADS1115_8_SPS); //comment line/change parameter to change SPS

-

-  /* Set continuous or single shot mode:

-   * 

-   *  ADS1115_CONTINUOUS  ->  continuous mode

-   *  ADS1115_SINGLE     ->  single shot mode (default)

-   */

-  //adc.setMeasureMode(ADS1115_CONTINUOUS); // continuous mode does not work with conversion ready

-

-   /* Choose maximum limit or maximum and minimum alert limit (window) in volts - alert pin will 

-   *  assert when measured values are beyond the maximum limit or outside the window 

-   *  Upper limit first: setAlertLimit_V(MODE, maximum, minimum)

-   *  In max limit mode the minimum value is the limit where the alert pin assertion will be cleared

-   *  (if not latched)  

-   * 

-   *  ADS1115_MAX_LIMIT

-   *  ADS1115_WINDOW

-   * 

-   */

-  //adc.setAlertModeAndLimit_V(ADS1115_MAX_LIMIT, 3.0, 1.5); //uncomment if you want to change the default

-  

-  /* Enable or disable latch. If latch is enabled the alert pin will assert until the

-   * conversion register is read (getResult functions). If disabled the alert pin assertion

-   * will be cleared with next value within limits. 

-   *  

-   *  ADS1115_LATCH_DISABLED (default)

-   *  ADS1115_LATCH_ENABLED

-   */

-  //adc.setAlertLatch(ADS1115_LATCH_ENABLED); //uncomment if you want to change the default

-

-  /* Sets the alert pin polarity if active:

-   *  

-   * ADS1115_ACT_LOW  ->  active low (default)   

-   * ADS1115_ACT_HIGH ->  active high

-   */

-  //adc.setAlertPol(ADS1115_ACT_LOW); //uncomment if you want to change the default

- 

-  /* With this function the alert pin assert, when a conversion is ready.

-   * In order to deactivate, use the setAlertLimit_V function  

-   */

-  adc.setAlertPinToConversionReady(); //needed for this sketch

-

-  Serial.println("ADS1115 Example Sketch - Single Shot, Conversion Ready Alert controlled");

-  Serial.println();

-  attachInterrupt(digitalPinToInterrupt(interruptPin), convReadyAlert, FALLING);

-  adc.startSingleMeasurement();

-}

-

-void loop() {

-  float voltage = 0.0;

-  static int counter = 0;

-  if(convReady){

-    counter++;

-    convReady = false;

-    if(counter==32){  // counter is 32, conversion rate is 8 SPS --> 4s

-      voltage = adc.getResult_V(); // alternative: getResult_mV for Millivolt

-      Serial.print("Channel 0 vs GND [V]: ");

-      Serial.println(voltage);

-      Serial.println("-------------------------------");

-      counter = 0;

-    }

-    adc.startSingleMeasurement();   

-  }

-}

-

-void convReadyAlert(){

-   convReady = true;

-}