summaryrefslogtreecommitdiffstats
path: root/src (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-03-24kernel/vm_manager: Tidy up heap allocation codeLioncash3-27/+37
Another holdover from citra that can be tossed out is the notion of the heap needing to be allocated in different addresses. On the switch, the base address of the heap will always be managed by the memory allocator in the kernel, so this doesn't need to be specified in the function's interface itself. The heap on the switch is always allocated with read/write permissions, so we don't need to add specifying the memory permissions as part of the heap allocation itself either. This also corrects the error code returned from within the function. If the size of the heap is larger than the entire heap region, then the kernel will report an out of memory condition.
2019-03-22loader/nso: Place translation unit specific functions into an anonymous namespaceLioncash1-20/+21
Makes it impossible to indirectly violate the ODR in some other translation unit due to these existing.
2019-03-22file_sys/cheat_engine: Silence truncation and sign-conversion warningsLioncash2-5/+6
2019-03-22file_sys/cheat_engine: Remove use of global system accessorsLioncash6-43/+51
Instead, pass in the core timing instance and make the dependency explicit in the interface.
2019-03-22loader/nso: Clean up use of magic constantsLioncash1-4/+6
Now that the NSO header has the proper size, we can just use sizeof on it instead of having magic constants.
2019-03-22file_sys/patch_manager: Deduplicate NSO headerLioncash3-64/+65
This source file was utilizing its own version of the NSO header. Instead of keeping this around, we can have the patch manager also use the version of the header that we have defined in loader/nso.h
2019-03-22loader/nso: Fix definition of the NSO header structLioncash1-3/+15
The total struct itself is 0x100 (256) bytes in size, so we should be providing that amount of data. Without the data, this can result in omitted data from the final loaded NSO file.
2019-03-22file_sys/patch_manager: Remove two magic valuesLioncash1-2/+5
These correspond to the NSOBuildHeader.
2019-03-22Revert "Devirtualize Register/Unregister and use a wrapper instead."bunnei3-8/+12
- Fixes graphical issues from transitions in Super Mario Odyssey.
2019-03-21service/am: Add function table for IDebugFunctionsLioncash1-1/+15
We already have the service related stuff set up for this, however, it's missing the function table.
2019-03-21kernel/vm_manager: Rename CodeStatic/CodeMutable to Code and CodeData respectivelyLioncash4-22/+20
Makes it more evident that one is for actual code and one is for actual data. Mutable and static are less than ideal terms here, because read-only data is technically not mutable, but we were mapping it with that label.
2019-03-21kernel/vm_manager: Amend flag values for CodeMutableLioncash1-1/+1
This should actually be using the data flags, rather than the code flags.
2019-03-21core/memory: Remove unnecessary includesLioncash1-3/+0
In 93da8e0abfcdcc6e3cb5488a0db12373429f1377, the page table construct was moved to the common library (which utilized these inclusions). Since the move, nothing requires these headers to be included within the memory header.
2019-03-21common/bit_util: Fix bad merge duplicating the copy constructorLioncash1-2/+0
Introduced as a result of #2090, we already define the copy constructor further down below, so this isn't needed.
2019-03-21memory_manager: Cleanup FindFreeRegion.bunnei2-12/+6
2019-03-21memory_manager: Use Common::AlignUp in public interface as needed.bunnei1-11/+22
2019-03-21common/uint128: Add missing header guardLioncash1-0/+2
2019-03-21common/uint128: Add missing top-file source textLioncash2-0/+7
2019-03-21memory_manager: Bug fixes and further cleanup.bunnei2-73/+72
2019-03-21memory: Check that core is powered on before attempting to use GPU.bunnei1-1/+1
- GPU will be released on shutdown, before pages are unmapped. - On subsequent runs, current_page_table will be not nullptr, but GPU might not be valid yet.
2019-03-21maxwell_dma: Check for valid source in destination before copy.bunnei1-0/+10
- Avoid a crash in Octopath Traveler.
2019-03-21memory_manager: Add protections for invalid GPU addresses.bunnei2-22/+43
- Avoid a crash in Xenoblade Chronicles 2.
2019-03-21gl_rasterizer_cache: Check that backing memory is valid before creating a surface.bunnei2-15/+12
- Fixes a crash in Puyo Puyo Tetris.
2019-03-21gpu: Rewrite virtual memory manager using PageTable.bunnei13-212/+481
2019-03-21gpu: Move GPUVAddr definition to common_types.bunnei17-39/+31
2019-03-21common/CMakeLists: Amend boost dependencyLioncash1-1/+1
When #2247 was created, thread_queue_list.h was the only user of boost-related code, however #2252 moved the page table struct into common, which makes use of Boost.ICL, so we need to add the dependency to the common library's link interface again.
2019-03-20kernel/process: Make MapSegment lambda reference parameter constLioncash1-1/+1
The segment itself isn't actually modified.
2019-03-20kernel: Move CodeSet structure to its own source filesLioncash8-44/+110
Given this is utilized by the loaders, this allows avoiding inclusion of the kernel process definitions where avoidable. This also keeps the loading format for all executable data separate from the kernel objects.
2019-03-20Fix crash caused by 2238.Fernando Sahmkow1-1/+2
2019-03-20loader: Remove Linker classLioncash3-185/+0
Given the class is now currently unused, it can be removed.
2019-03-20loader: Remove Linker inheritance from NRO and NSO loadersLioncash2-4/+4
Neither the NRO or NSO loaders actually make use of the functions or members provided by the Linker interface, so we can just remove the inheritance altogether.
2019-03-19Fix getopt on systems where char is unsigned by defaultxperia641-2/+2
2019-03-19file_sys/content_archive: Amend name of Data_Unknown5 enum entryLioncash2-2/+15
While we're at it, give each entry some documentation.
2019-03-18input_common/sdl: Correct return values within implementations of GetPollers()Lioncash2-2/+6
In both cases, we weren't actually returning anything, which is undefined behavior.
2019-03-18input_common/sdl: Use a type alias to shorten declaration of GetPollersLioncash3-11/+9
Just makes the definitions a little bit more tidy.
2019-03-18fsp_srv: Unstub SetCurrentProcessLioncash2-1/+5
This just acts as a basic setter for a given PID value and performs no further checking, so we can just store the passed in value.
2019-03-18service/am: Add basic implementation of ChangeMainAppletMasterVolumeLioncash2-1/+29
All this does is supply a new volume level and a fade time in nanoseconds for the volume transition to occur within.
2019-03-18service/am: Unstub SetTransparentVolumeRate()Lioncash2-1/+17
Like the other volume setter, this mainly just sets a data member within the service, nothing too special.
2019-03-18service/am: Unstub SetExpectedMasterVolume()Lioncash2-11/+27
This function passes in the desired main applet and library applet volume levels. We can then just pass those values back within the relevant volume getter functions, allowing us to unstub those as well. The initial values for the library and main applet volumes differ. The main applet volume is 0.25 by default, while the library applet volume is initialized to 1.0 by default in the services themselves.
2019-03-17CMakeLists: Move off of modifying CMAKE_*-related flagsLioncash1-20/+12
Modifying CMAKE_* related flags directly applies those changes to every single CMake target. This includes even the targets we have in the externals directory. So, if we ever increased our warning levels, or enabled particular ones, or enabled any other compilation setting, then this would apply to externals as well, which is often not desirable. This makes our compilation flag setup less error prone by only applying our settings to our targets and leaving the externals alone entirely. This also means we don't end up clobbering any provided flags on the command line either, allowing users to specifically use the flags they want.
2019-03-17input_common/sdl_impl: Make lambda capture more specific in SDLState constructorLioncash1-1/+1
We don't need to universally capture by reference. We specifically just need to capture the this pointer.
2019-03-17input_common/sdl_impl: Remove unnecessary std::chrono::duration constructionLioncash1-1/+1
Specifying the time unit itself is sufficient here.
2019-03-17input_common/sdl_impl: Remove unused variable in SDLState constructorLioncash1-1/+0
2019-03-17CMakeLists: Move compilation flags into the src directoryLioncash1-0/+69
We generally shouldn't be hijacking CMAKE_CXX_FLAGS, etc as a means to append flags to the targets, since this adds the compilation flags to everything, including our externals, which can result in weird issues and makes the build hierarchy fragile. Instead, we want to just apply these compilation flags to our targets, and let those managing external libraries to properly specify their compilation flags. This also results in us not getting as many warnings, as we don't raise the warning level on every external target.
2019-03-17core: Move PageTable struct into Common.bunnei16-171/+215
2019-03-17gl_rasterizer: Skip zero addr/sized regions on flush/invalidate.bunnei1-0/+6
2019-03-16ipc_helpers: Allow pushing and popping floating-point valuesLioncash1-0/+30
Certain values that are passed through the IPC buffer are actually floating point values, not solely integral values.
2019-03-16common/thread_queue_list: Remove unnecessary dependency on boostLioncash2-4/+4
We really don't need to pull in several headers of boost related machinery just to perform the erase-remove idiom (particularly with C++20 around the corner, which adds universal container std::erase and std::erase_if, which we can just use instead). With this, we don't need to link in anything boost-related into common.
2019-03-16kernel/thread: Actually remove the definition of ExitCurrentThread()Lioncash1-6/+0
This was intended to be removed in 51d7f6bffcc0498a47abc7de27bf0906fc523dae, but I guess I forgot to actually save the file like a dingus.
2019-03-16memory: Simplify rasterizer cache operations.bunnei3-68/+22
2019-03-16video_core: Refactor to use MemoryManager interface for all memory access.bunnei20-189/+196
# Conflicts: # src/video_core/engines/kepler_memory.cpp # src/video_core/engines/maxwell_3d.cpp # src/video_core/morton.cpp # src/video_core/morton.h # src/video_core/renderer_opengl/gl_global_cache.cpp # src/video_core/renderer_opengl/gl_global_cache.h # src/video_core/renderer_opengl/gl_rasterizer_cache.cpp
2019-03-16kernel/thread: Move thread exiting logic from ExitCurrentThread to svcExitThreadLioncash2-8/+7
Puts the operation on global state in the same places as the rest of the svc calls.
2019-03-16kernel/thread: Migrate WaitCurrentThread_Sleep into the Thread interfaceLioncash4-25/+24
Rather than make a global accessor for this sort of thing. We can make it a part of the thread interface itself. This allows getting rid of a hidden global accessor in the kernel code.
2019-03-16kernel/thread: Expand documentation of nominal_priority and current_priorityLioncash2-3/+11
Aims to disambiguate why each priority instance exists a little bit. While we're at it, also add an explanatory comment to UpdatePriority().
2019-03-16kernel/thread: Make bracing consistent within UpdatePriority()Lioncash1-2/+4
2019-03-16kernel/thread: Amend condition within UpdatePriority()Lioncash1-3/+3
This condition was checking against the nominal thread priority, whereas the kernel itself checks against the current priority instead. We were also assigning the nominal priority, when we should be assigning current_priority, which takes priority inheritance into account. This can lead to the incorrect priority being assigned to a thread. Given we recursively update the relevant threads, we don't need to go through the whole mutex waiter list. This matches what the kernel does as well (only accessing the first entry within the waiting list).
2019-03-16kernel/thread: Maintain priority ordering of added mutex waiting threadsLioncash1-14/+24
The kernel keeps the internal waiting list ordered by priority. This is trivial to do with std::find_if followed by an insertion.
2019-03-15frontend: qt: fix a freeze where if you click on entry in the game list too fast, citra will hangliushuyu1-3/+1
2019-03-15gpu: Use host address for caching instead of guest address.bunnei26-294/+394
2019-03-15core/hle/kernel/mutex: Remove usages of global system accessorsLioncash1-11/+15
Removes the use of global system accessors, and instead uses the explicit interface provided.
2019-03-15core/hle/kernel: Make Mutex a per-process class.Lioncash5-18/+47
Makes it an instantiable class like it is in the actual kernel. This will also allow removing reliance on global accessors in a following change, now that we can encapsulate a reference to the system instance in the class.
2019-03-13video_core/morton: Use enum to describe MortonCopyPixels128 modeReinUsesLisp3-7/+10
2019-03-13video_core/morton: Remove unused parameter in MortonSwizzleReinUsesLisp3-8/+7
2019-03-13video_core/morton: Remove clang-format off when it's not neededReinUsesLisp1-133/+129
2019-03-13video_core/morton: Remove unused functionsReinUsesLisp1-39/+0
2019-03-13video_core/texture: Fix up sampler lod biasReinUsesLisp1-1/+1
2019-03-13vk_sampler_cache: Use operator== instead of memcmpMat M1-1/+1
Co-Authored-By: ReinUsesLisp <reinuseslisp@airmail.cc>
2019-03-13vk_sampler_cache: Implement a sampler cacheReinUsesLisp4-1/+140
2019-03-13kernel/process: Remove use of global system accessorsLioncash2-8/+9
Now that we pass in a reference to the system instance, we can utilize it to eliminate the global accessors in Process-related code.
2019-03-12video_core/texture: Add a raw representation of TSCEntryReinUsesLisp1-24/+29
2019-03-11renderer_opengl/gl_global_cache: Replace indexing for assignment with insert_or_assignLioncash2-3/+3
The previous code had some minor issues with it, really not a big deal, but amending it is basically 'free', so I figured, "why not?". With the standard container maps, when: map[key] = thing; is done, this can cause potentially undesirable behavior in certain scenarios. In particular, if there's no value associated with the key, then the map constructs a default initialized instance of the value type. In this case, since it's a std::shared_ptr (as a type alias) that is the value type, this will construct a std::shared_pointer, and then assign over it (with objects that are quite large, or actively heap allocate this can be extremely undesirable). We also make the function take the region by value, as we can avoid a copy (and by extension with std::shared_ptr, a copy causes an atomic reference count increment), in certain scenarios when ownership isn't a concern (i.e. when ReserveGlobalRegion is called with an rvalue reference, then no copy at all occurs). So, it's more-or-less a "free" gain without many downsides.
2019-03-11renderer_opengl/gl_global_cache: Append missing override specifiersLioncash1-2/+2
Two of the functions here are overridden functions, so we can append these specifiers to make it explicit.
2019-03-11set_sys: Move constants to anonymous namespaceZach Hilman1-1/+1
2019-03-11kernel/server_port: Make data members privateLioncash4-14/+36
With this, all kernel objects finally have all of their data members behind an interface, making it nicer to reason about interactions with other code (as external code no longer has the freedom to totally alter internals and potentially messing up invariants).
2019-03-11hwopus: Leverage multistream API for decoding regular Opus packetsLioncash1-34/+48
After doing a little more reading up on the Opus codec, it turns out that the multistream API that is part of libopus can handle regular packets. Regular packets are just a degenerate case of multistream Opus packets, and all that's necessary is to pass the number of streams as 1 and provide a basic channel mapping, then everything works fine for that case. This allows us to get rid of the need to use both APIs in the future when implementing multistream variants in a follow-up PR, greatly simplifying the code that needs to be written.
2019-03-11gl_rasterizer: Use system instance passed from argumentReinUsesLisp2-29/+31
2019-03-11set_sys: Use official nintendo version stringZach Hilman4-19/+25
2019-03-11system_version: Correct sizes on VectorVfsFile constructionZach Hilman1-4/+4
2019-03-11set_sys: Use correct error codes in GetFirmwareVersion*Zach Hilman1-21/+41
2019-03-10core/hle/result: Remove now-unnecessary manually defined copy assignment operatorLioncash1-5/+0
Previously this was required, as BitField wasn't trivially copyable. BitField has since been made trivially copyable, so now this isn't required anymore.
2019-03-10core/hle/result: Amend error in comment description for ResultCodeLioncash1-1/+1
Gets rid of another holdover from Citra, and describes the OS on the Switch instead.
2019-03-10core/hle/result: Remove now-unused constructor for ResultCodeLioncash1-10/+0
Now that the final stray ErrorDescription member was relocated, we can finally remove it and its relevant constructor in the ResultCode union.
2019-03-10core/hle/result: Relocate IPC error code to ipc_helpersLioncash3-3/+4
Relocates the error code to where it's most related, similar to how all the other error codes are. Previously we were including a non-generic error in the main result code header.
2019-03-10service/service: Remove unncessary calls to c_str()Lioncash1-4/+3
These can just be passed regularly, now that we use fmt instead of our old logging system. While we're at it, make the parameters to MakeFunctionString std::string_views.
2019-03-10set_sys: Implement GetFirmwareVersion(2) for libnx hosversionZach Hilman6-3/+128
Uses the synthesized system archive 9 (SystemVersion) and reports v5.1.0-0.0
2019-03-10audio_core/cubeb_sink: Convert _MSC_VER ifdefs to _WIN32Lioncash2-4/+4
This behavior also needs to be visible for MinGW builds as well.
2019-03-09clang fixHexagon121-1/+2
2019-03-09Log 2 new setting valuesHexagon121-0/+2
2019-03-09gl_rasterizer: Encapsulate sampler queries into methodsReinUsesLisp3-64/+72
2019-03-09yuzu_cmd/config: Replace C casts with static_castReinUsesLisp1-4/+5
2019-03-09yuzu_cmd/config: Silent implicit cast warningReinUsesLisp1-1/+1
2019-03-09gl_rasterizer: Minor logger changesReinUsesLisp1-19/+13
2019-03-08dma_pusher: Store command_list_header by copyReinUsesLisp1-1/+1
Instead of holding a reference that will get invalidated by dma_pushbuffer.pop(), hold it as a copy. This doesn't have any performance cost since CommandListHeader is 8 bytes long.
2019-03-08kernel/hle_ipc: Convert std::shared_ptr IPC header instances to std::optionalLioncash4-47/+47
There's no real need to use a shared lifetime here, since we don't actually expose them to anything else. This is also kind of an unnecessary use of the heap given the objects themselves are so small; small enough, in fact that changing over to optionals actually reduces the overall size of the HLERequestContext struct (818 bytes to 808 bytes).
2019-03-08kernel: Make the address arbiter instance per-processLioncash8-28/+35
Now that we have the address arbiter extracted to its own class, we can fix an innaccuracy with the kernel. Said inaccuracy being that there isn't only one address arbiter. Each process instance contains its own AddressArbiter instance in the actual kernel. This fixes that and gets rid of another long-standing issue that could arise when attempting to create more than one process.
2019-03-08kernel/svc: Move address arbiter signaling behind a unified API functionLioncash3-22/+26
Similar to how WaitForAddress was isolated to its own function, we can also move the necessary conditional checking into the address arbiter class itself, allowing us to hide the implementation details of it from public use.
2019-03-08kernel/svc: Move address arbiter waiting behind a unified API functionLioncash3-19/+24
Rather than let the service call itself work out which function is the proper one to call, we can make that a behavior of the arbiter itself, so we don't need to directly expose those implementation details.
2019-03-07common/bit_field: Make BitField trivially copyableLioncash1-9/+7
This makes the class much more flexible and doesn't make performing copies with classes that contain a bitfield member a pain. Given BitField instances are only intended to be used within unions, the fact the full storage value would be copied isn't a big concern (only sizeof(union_type) would be copied anyways). While we're at it, provide defaulted move constructors for consistency.
2019-03-07video_core/gpu_thread: Remove unimplemented WaitForIdle function prototypeLioncash1-3/+0
This function didn't have a definition, so we can remove it to prevent accidentally attempting to use it.
2019-03-07video_core/gpu_thread: Amend constructor initializer list orderLioncash1-2/+2
Moves the data members to satisfy the order they're declared as in the constructor initializer list. Silences a -Wreorder warning.
2019-03-07video_core/gpu: Make GPU's destructor virtualLioncash3-3/+3
Because of the recent separation of GPU functionality into sync/async variants, we need to mark the destructor virtual to provide proper destruction behavior, given we use the base class within the System class. Prior to this, it was undefined behavior whether or not the destructor in the derived classes would ever execute.
2019-03-07citra_qt: Settings (configuration) reworkzhupengfei2-203/+250
2019-03-07service/audio/hwopus: Move decoder state to its own classLioncash1-50/+85
Moves the non-multistream specific state to its own class. This will be necessary to support the multistream variants of opus decoding.
2019-03-07service/audio/hwopus: Provide a name for the second word of OpusPacketHeaderLioncash1-2/+4
This indicates the entropy coder's final range.
2019-03-07service/audio/hwopus: Move Opus packet header out of the IHardwareOpusDecoderManagerLioncash1-17/+17
This will be utilized by more than just that class in the future. This also renames it from OpusHeader to OpusPacketHeader to be more specific about what kind of header it is.
2019-03-07service/audio/hwopus: Enclose internals in an anonymous namespaceLioncash1-2/+3
Makes it impossible to violate the ODR, as well as providing a place for future changes.
2019-03-07service/audio/audout_u: Only actually stop the audio stream in StopAudioOut if the stream is playingLioncash1-1/+3
The service itself only does further actions if the stream is playing. If the stream is already stopped, then it just exits successfully.
2019-03-07gpu_thread: Fix deadlock with threading idle state check.bunnei2-7/+11
2019-03-07gpu_thread: (HACK) Ignore flush on FlushAndInvalidateRegion.bunnei1-3/+1
2019-03-07gpu: Always flush.bunnei2-13/+6
2019-03-07gpu: Refactor a/synchronous implementations into their own classes.bunnei8-65/+162
2019-03-07gpu: Move command processing to another thread.bunnei9-15/+358
2019-03-07bootmanager: Ensure that we have a context for shader loading.bunnei1-4/+6
2019-03-07gpu: Refactor command and swap buffers interface for asynch.bunnei5-17/+26
2019-03-07gpu: Refactor to take RendererBase instead of RasterizerInterface.bunnei3-18/+23
2019-03-07settings: Add new graphics setting for use_asynchronous_gpu_emulation.bunnei7-0/+24
2019-03-07core: Set is_powered_on before GPU is initialized.bunnei1-1/+3
2019-03-06yuzu: add a hotkey to switch between undocked and docked modefearlessTobi1-0/+8
2019-03-06hle/service/audio/audout_u: Correct lack of return in failure case of AppendAudioOutBufferImpl()Lioncash1-0/+1
Previously we were overwriting the error case with a success code further down (which is definitely not what we should be doing here).
2019-03-06yuzu/debugger/wait_tree: Remove use of global CurrentProcess accessorLioncash2-5/+6
We already have the thread instance that was created under the current process, so we can just pass the handle table of it along to retrieve the owner of the mutex.
2019-03-06video_core/engines: Remove unnecessary includesLioncash10-11/+11
Removes a few unnecessary dependencies on core-related machinery, such as the core.h and memory.h, which reduces the amount of rebuilding necessary if those files change. This also uncovered some indirect dependencies within other source files. This also fixes those.
2019-03-06kernel/server_session: Make data members privateLioncash5-32/+73
Makes it much nicer to locally reason about server session behavior, as part of its functionality isn't placed around other classes.
2019-03-06kernel/client_session: Make data members privateLioncash1-4/+5
These can be made private, as they aren't accessed in contexts that require them to be public.
2019-03-05hle/service/audio: Extract audio error codes to a headerLioncash4-10/+21
Places all error codes in an easily includable header. This also corrects the unsupported error code (I accidentally used the hex value when I meant to use the decimal one).
2019-03-05kernel/address_arbiter: Pass in system instance to constructorLioncash6-26/+45
Allows getting rid of reliance on the global accessor functions and instead operating on the provided system instance.
2019-03-05kernel/address_arbiter: Minor tidying upLioncash1-18/+18
- Invert conditions into guard clases where applicable. - Mark std::vector parameter of WakeThreads as const
2019-03-05kernel/address_arbiter: Convert the address arbiter into a classLioncash5-82/+135
Places all of the functions for address arbiter operation into a class. This will be necessary for future deglobalizing efforts related to both the memory and system itself.
2019-03-05video_core/surface: Remove obsolete TODO in PixelFormatFromRenderTargetFormat()Lioncash1-2/+0
This isn't needed anymore, according to Hexagon
2019-03-05vm_manager: Remove cheat-specific ranges from VMManagerZach Hilman10-77/+56
2019-03-05kernel/thread: Remove obsolete TODO in Create()Lioncash1-2/+0
This is a TODO carried over from Citra that doesn't apply here.
2019-03-05core/hle/ipc: Remove unnecessary includesLioncash6-8/+12
Removes a few inclusion dependencies from the headers or replaces existing ones with ones that don't indirectly include the required headers. This allows removing an inclusion of core/memory.h, meaning that if the memory header is ever changed in the future, it won't result in rebuilding the entirety of the HLE services (as the IPC headers are used quite ubiquitously throughout the HLE service implementations).
2019-03-05core: Add support for registering and controlling ownership of CheatEngineZach Hilman2-0/+13
2019-03-05cheat_engine: Add parser and interpreter for game cheatsZach Hilman3-0/+715
2019-03-05loader/nso: Set main code region in VMManagerZach Hilman3-2/+21
For rom directories (and by extension, XCI/NSP/NAX/NCA) this is for the NSO with name 'main', for regular NSOs, this is the NSO.
2019-03-05vm_manager: Add support for storing and getting main code regionZach Hilman2-0/+28
Used as root for one region of cheats, set by loader
2019-03-05patch_manager: Display cheats in game list add-onsZach Hilman1-0/+2
2019-03-05patch_manager: Add support for loading cheats listsZach Hilman2-0/+56
Uses load/<title_id>/<mod_name>/cheats as root dir, file name is all upper or lower hex first 8 bytes build ID.
2019-03-05controllers/npad: Add accessor for current press stateZach Hilman1-0/+1
Allows frontend/features to access pressed buttons conveniently as possible
2019-03-05web_browser: Add shortcut to Enter key to exit appletZach Hilman2-0/+7
Addresses issues where a user in fullscreen could not exit some web applets without leaving fullscreen.
2019-03-04vm_manager: Use range helpers in HeapAlloc() and HeapFree()Lioncash1-4/+2
Significantly tidies up two guard conditionals.
2019-03-04vm_manager: Provide address range checking functions for other memory regionsLioncash2-4/+35
Makes the interface uniform when it comes to checking various memory regions.
2019-03-04kernel/scheduler: Pass in system instance in constructorLioncash5-17/+23
Avoids directly relying on the global system instance and instead makes an arbitrary system instance an explicit dependency on construction. This also allows removing dependencies on some global accessor functions as well.
2019-03-04kernel/shared_memory: Get rid of the use of global accessor functions within Create()Lioncash1-3/+2
Given we already pass in a reference to the kernel that the shared memory instance is created under, we can just use that to check the current process, rather than using the global accessor functions. This allows removing direct dependency on the system instance entirely.
2019-03-04svc: Migrate address range checking functions to VMManagerLioncash3-23/+30
Provides a bit of a more proper interface for these functions.
2019-03-04core/core: Remove the global telemetry accessor functionLioncash1-4/+0
With all usages converted off of it, this function can be removed.
2019-03-04yuzu: Remove usage of the global telemetry accessorLioncash2-3/+3
In these cases the system object is nearby, and in the other, the long-form of accessing the telemetry instance is already used, so we can get rid of the use of the global accessor.
2019-03-04yuzu-cmd/yuzu: Replace direct usage of the global system telemetry accessor in main()Lioncash1-1/+1
We already have the system instance around, so we can use that instead of the accessor.
2019-03-04core/core: Replace direct usage of the global system telemetry accessor from Shutdown()Lioncash1-7/+7
The telemetry instance is actually a member of the class itself, so we can access it directly instead of going through the global accessor.
2019-03-04video_core/renderer_opengl: Replace direct usage of global system object accessorsLioncash2-11/+17
We already pass a reference to the system object to the constructor of the renderer, so we can just use that instead of using the global accessor functions.
2019-03-04maxwell_to_vk: Initial implementationReinUsesLisp4-3/+553
2019-03-02web_service: Remove unnecessary inclusionsLioncash2-3/+0
Reduces the potential amount of rebuilding necessary if any headers change. In particular, we were including a header from the core library when we don't even link the core library to the web_service library, so this also gets rid of an indirect dependency.
2019-03-02logging/backend: Make time_origin a class variable instead of a local staticLioncash1-2/+1
Moves local global state into the Impl class itself and initializes it at the creation of the instance instead of in the function. This makes it nicer for weakly-ordered architectures, given the CreateEntry() class won't need to have atomic loads executed for each individual call to the CreateEntry class.
2019-03-02logging/backend: Move CreateEntry into the Impl classLioncash2-29/+26
This function is only ever used within this source file and makes it easier to remove static state in the following change.
2019-03-02fixup! Joystick: Allow for background events; Add deadzone to SDLAnalogB3n301-6/+17
2019-03-02input/sdl: lock map mutex after SDL callWeiyi Wang1-11/+17
Any SDL invocation can call the even callback on the same thread, which can call GetSDLJoystickBySDLID and eventually cause double lock on joystick_map_mutex. To avoid this, lock guard should be placed as closer as possible to the object accessing code, so that any SDL invocation is with the mutex unlocked
2019-03-02Input: Remove global variables from SDL InputJames Rowe9-809/+206
Changes the interface as well to remove any unique methods that frontends needed to call such as StartJoystickEventHandler by conditionally starting the polling thread only if the frontend hasn't started it already. Additionally, moves all global state into a single SDLState class in order to guarantee that the destructors are called in the proper order
2019-03-02Input: Copy current SDL.h/cpp files to implJames Rowe2-0/+680
This should make reviewing much easier as you can then see what changed happened between the old file and the new one
2019-03-02citra_qt/main: make SPEED_LIMIT_STEP static constexprfearlessTobi1-1/+4
MSVC does not seem to like using constexpr values in a lambda that were declared outside of it. Previously on MSVC build the hotkeys to inc-/decrease the speed limit were not working correctly because in the lambda the SPEED_LIMIT_STEP had garbage values. After googling around a bit I found: https://github.com/codeplaysoftware/computecpp-sdk/issues/95 which seems to be a similar issue. Trying the suggested fix to make the variable static constexpr also fixes the bug here.
2019-03-02Memory: don't lock hle mutex in memory read/writeWeiyi Wang1-6/+0
The comment already invalidates itself: neither MMIO nor rasterizer cache belongsHLE kernel state. This mutex has a too large scope if MMIO or cache is included, which is prone to dead lock when multiple thread acquires these resource at the same time. If necessary, each MMIO component or rasterizer should have their own lock.
2019-03-02vk_buffer_cache: Fix clang-formatReinUsesLisp1-3/+3
2019-03-02fuck git for ruining my day, I will learn but I will not forgivebunnei1-1/+1
2019-03-01vk_buffer_cache: Implement a buffer cacheReinUsesLisp3-0/+205
This buffer cache is just like OpenGL's buffer cache with some minor style changes. It uses VKStreamBuffer.
2019-03-01service/audio/audren_u: Implement OpenAudioRendererAutoLioncash2-7/+20
This currently has the same behavior as the regular OpenAudioRenderer API function, so we can just move the code within OpenAudioRenderer to an internal function that both service functions call.
2019-03-01service/audio: Provide an implementation of ExecuteAudioRendererRenderingLioncash1-1/+12
This service function appears to do nothing noteworthy on the switch. All it does at the moment is either return an error code or abort the system. Given we obviously don't want to kill the system, we just opt for always returning the error code.
2019-02-28gl_rasterizer: Remove texture unbinding after dispatching a draw callReinUsesLisp1-12/+0
Unbinding was required when OpenGL delete operations didn't unbind a resource if it was bound. This is no longer needed and can be removed.
2019-02-28gl_state: Fixup multibind bugReinUsesLisp1-2/+2
2019-02-28Devirtualize Register/Unregister and use a wrapper instead.Fernando Sahmkow3-12/+8
2019-02-28Corrections and redesign.Fernando Sahmkow2-51/+51
2019-02-28Fix linux compile error.Fernando Sahmkow1-1/+1
2019-02-28Remove NotifyFrameBuffer as we are doing a texception pass every drawcall.Fernando Sahmkow2-25/+0
2019-02-28Remove certain optimizations that caused texception to fail in certain scenarios.Fernando Sahmkow3-24/+1
2019-02-28Bug fixes and formattingFernando Sahmkow2-3/+4
2019-02-28rasterizer_cache_gl: Implement Texception PassFernando Sahmkow3-0/+51
2019-02-28rasterizer_cache_gl: Implement Partial Reinterpretation of Surfaces.Fernando Sahmkow2-0/+100
2019-02-28rasterizer_cache: mark reinterpreted surfaces and add ability to reload marked surfaces on next use.Fernando Sahmkow2-0/+78
2019-02-28rasterizer_cache_gl: Notify on framebuffer changeFernando Sahmkow2-4/+23
2019-02-28rasterizer_cache: Expose FlushObject to Child classes and allow redefining of Register and UnregisterFernando Sahmkow1-11/+11
2019-02-27Speed up memory page mapping (#2141)Annomatg1-6/+11
- Memory::MapPages total samplecount was reduced from 4.6% to 1.06%. - From main menu into the game from 1.03% to 0.35%
2019-02-27audio_core/cubeb_sink: Ensure COM is initialized on Windows prior to calling cubeb_initLioncash2-0/+19
cubeb now requires that COM explicitly be initialized on the thread prior to calling cubeb_init.
2019-02-27gl_rasterizer_cache: Create texture views for array discrepanciesReinUsesLisp3-32/+42
When a texture is sampled in a shader with a different array mode than the cached state, create a texture view and bind that to the shader instead.
2019-02-27service/hid: Amend forward declaration of ServiceManagerLioncash1-1/+1
The SM namespace is within the Service namespace, so this was forward declaring a type that didn't exist.
2019-02-27yuzu/compatdb: Remove unused lambda captureLioncash1-1/+1
Silences a compiler warning with clang.
2019-02-27vk_memory_manager: Reorder constructor initializer list in terms of member declaration orderLioncash1-1/+1
Reorders members in the order that they would actually be initialized in. Silences a -Wreorder warning.
2019-02-27gl_rasterizer: Reorder constructor initializer list in terms of member declaration orderLioncash1-2/+2
Orders the members in the order they would actually be initialized in. Silences a -Wreorder warning.
2019-02-27gl_shader_disk_cache: Remove #pragma once from cpp fileLioncash1-2/+0
This is only necessary in headers. Silences a warning with clang.
2019-02-27core/frontend/emu_window: Make ClipToTouchScreen a const member functionLioncash2-2/+2
This member function doesn't modify instance state, so it can have the const specifier applied to it.
2019-02-27audio_core/audio_renderer: Name previously unknown parameters of AudioRendererParameterLioncash2-19/+21
Provides names for previously unknown entries (aside from the two u8 that appear to be padding bytes, and a single word that also appears to be reserved or padding). This will be useful in subsequent changes when unstubbing behavior related to the audio renderer services.
2019-02-27common/math_util: Move contents into the Common namespaceLioncash18-40/+40
These types are within the common library, so they should be within the Common namespace.
2019-02-27common/vector_math: Move Vec[x] types into the Common namespaceLioncash6-38/+38
These types are within the common library, so they should be using the Common namespace.
2019-02-27common/quaternion: Move Quaternion into the Common namespaceLioncash2-6/+6
Quaternion is within the common library, so it should be using the Common namespace.
2019-02-27service/vi: Unstub GetDisplayServiceLioncash5-11/+49
This function is also supposed to check its given policy type with the permission of the service itself. This implements the necessary machinery to unstub these functions. Policy::User seems to just be basic access (which is probably why vi:u is restricted to that policy), while the other policy seems to be for extended abilities regarding which displays can be managed and queried, so this is assumed to be for a background compositor (which I've named, appropriately, Policy::Compositor).
2019-02-27core/ipc_helper: Allow popping all signed value types with RequestParserLioncash1-0/+15
There's no real reason this shouldn't be allowed, given some values sent via a request can be signed. This also makes it less annoying to work with popping enum values, given an enum class with no type specifier will work out of the box now. It's also kind of an oversight to allow popping s64 values, but nothing else.
2019-02-27gl_rasterizer_cache: Move format conversion to its own fileReinUsesLisp7-136/+175
2019-02-27decoders: Minor style changesReinUsesLisp2-14/+8
2019-02-26service/vi: Remove use of a module classLioncash8-46/+99
This didn't really provide much benefit here, especially since the subsequent change requires that the behavior for each service's GetDisplayService differs in a minor detail. This also arguably makes the services nicer to read, since it gets rid of an indirection in the class hierarchy.
2019-02-26renderer_opengl: Update pixel format trackingReinUsesLisp1-0/+1
2019-02-26maxwell_3d: Use std::bitset to manage dirty flagsReinUsesLisp4-52/+51
2019-02-26vk_stream_buffer: Remove copy code pathReinUsesLisp2-53/+18
2019-02-26shader/decode: Remove extras from MetaTextureReinUsesLisp4-40/+65
2019-02-26shader/decode: Split memory and texture instructions decodingReinUsesLisp7-501/+538
2019-02-25kernel/handle_table: Make local variables as const where applicableLioncash1-4/+5
Makes immutable state explicit.
2019-02-25kernel/handle_table: Allow process capabilities to limit the handle table sizeLioncash6-10/+54
The kernel allows restricting the total size of the handle table through the process capability descriptors. Until now, this functionality wasn't hooked up. With this, the process handle tables become properly restricted. In the case of metadata-less executables, the handle table will assume the maximum size is requested, preserving the behavior that existed before these changes.
2019-02-25kernel/handle-table: In-class initialize data membersLioncash2-3/+2
Directly initializes members where applicable.
2019-02-25kernel/handle_table: Resolve truncation warningsLioncash1-2/+2
Avoids implicit truncation warnings from u32 -> u16 (the truncation is desirable behavior here).
2019-02-25audio_core/cubeb_sink: Initialize CubebSinkStream's last_frame data memberLioncash1-1/+1
Ensures that all member variables are initialized in a deterministic manner across the board.
2019-02-25audio_core/cubeb_sink: Add override specifier to destructorLioncash1-1/+1
CubebSinkStream inherits from a base class with a virtual destructor, so override can be appended to CubebSinkStream's destructor.
2019-02-25audio_core/cubeb_sink: Resolve variable shadowing warnings in SamplesInQueueLioncash1-2/+2
The name of the parameter was shadowing the member variable of the same name. Instead, alter the name of the parameter to prevent said shadowing.
2019-02-25audio_core/codec: Resolve truncation warnings within DecodeADPCMLioncash1-2/+2
The assignments here were performing an implicit truncation from int to s16. Make it explicit that this is desired behavior.
2019-02-25shader/track: Resolve variable shadowing warningsLioncash1-5/+5
2019-02-25service/vi: Update IManagerDisplayService's function tableLioncash1-0/+1
Amends it to add the 7.0.0+ CreateStrayLayer function.
2019-02-25file_sys/vfs_vector: Fix ignored offset on WriteFrederic L1-1/+1
2019-02-24Remove GCC version checkstgsm1-3/+3
Citra can't be compiled using GCC <7 because of required C++17 support, so these version checks don't need to exist anymore.
2019-02-24vk_stream_buffer: Implement a stream bufferReinUsesLisp3-1/+200
This manages two kinds of streaming buffers: one for unified memory models and one for dedicated GPUs. The first one skips the copy from the staging buffer to the real buffer, since it creates an unified buffer. This implementation waits for all fences to finish their operation before "invalidating". This is suboptimal since it should allocate another buffer or start searching from the beginning. There is room for improvement here. This could also handle AMD's "pinned" memory (a heap with 256 MiB) that seems to be designed for buffer streaming.
2019-02-24vk_resource_manager: Minor VKFenceWatch changesReinUsesLisp2-7/+7
2019-02-24vk_memory_manager: Fixup commit interval allocationReinUsesLisp1-2/+1
VKMemoryCommitImpl was using as the end of its interval "begin + end". That ended up wasting memory.
2019-02-24gl_rasterizer_cache: Fixup parameter order in layered swizzleReinUsesLisp1-1/+1
2019-02-22vk_scheduler: Implement a schedulerReinUsesLisp3-1/+132
The scheduler abstracts command buffer and fence management with an interface that's able to do OpenGL-like operations on Vulkan command buffers. It returns by value a command buffer and fence that have to be used for subsequent operations until Flush or Finish is executed, after that the current execution context (the pair of command buffers and fences) gets invalidated a new one must be fetched. Thankfully validation layers will quickly detect if this is skipped throwing an error due to modifications to a sent command buffer.
2019-02-22service/nvflinger: Store BufferQueue instances as regular data membersLioncash7-36/+39
The NVFlinger service is already passed into services that need to guarantee its lifetime, so the BufferQueue instances will already live as long as they're needed. Making them std::shared_ptr instances in this case is unnecessary.
2019-02-21service/vi/vi_layer: Convert Layer struct into a classLioncash6-10/+43
Like the previous changes made to the Display struct, this prepares the Layer struct for changes to its interface. Given Layer will be given more invariants in the future, we convert it into a class to better signify that.
2019-02-21service/nvflinger: Move display specifics over to vi_displayLioncash4-35/+141
With the display and layer structures relocated to the vi service, we can begin giving these a proper interface before beginning to properly support the display types. This converts the display struct into a class and provides it with the necessary functions to preserve behavior within the NVFlinger class.
2019-02-21Fixes Unicode Key File Directories (#2120)Jungy1-1/+2
* Fixes Unicode Key File Directories Adds code so that when loading a file it converts to UTF16 first, to ensure the files can be opened. Code borrowed from FileUtil::Exists. * Update src/core/crypto/key_manager.cpp Co-Authored-By: Jungorend <Jungorend@users.noreply.github.com> * Update src/core/crypto/key_manager.cpp Co-Authored-By: Jungorend <Jungorend@users.noreply.github.com> * Using FileUtil instead to be cleaner. * Update src/core/crypto/key_manager.cpp Co-Authored-By: Jungorend <Jungorend@users.noreply.github.com>
2019-02-20service/nvflinger: Relocate definitions of Layer and Display to the vi serviceLioncash7-57/+123
These are more closely related to the vi service as opposed to the intermediary nvflinger. This also places them in their relevant subfolder, as future changes to these will likely result in subclassing to represent various displays and services, as they're done within the service itself on hardware. The reasoning for prefixing the display and layer source files is to avoid potential clashing if two files with the same name are compiled (e.g. if 'display.cpp/.h' or 'layer.cpp/.h' is added to another service at any point), which MSVC will actually warn against. This prevents that case from occurring. This also presently coverts the std::array introduced within f45c25aabacc70861723a7ca1096a677bd987487 back to a std::vector to allow the forward declaration of the Display type. Forward declaring a type within a std::vector is allowed since the introduction of N4510 (http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4510.html) by Zhihao Yuan.
2019-02-19video_core/dma_pusher: Simplyfy Step() logic.Markus Wick2-81/+77
As fetching command list headers and and the list of command headers is a fixed 1:1 relation now, they can be implemented within a single call. This cleans up the Step() logic quite a bit.
2019-02-19video_core/dma_pusher: The full list of headers at once.Markus Wick2-48/+58
Fetching every u32 from memory leads to a big overhead. So let's fetch all of them as a block if possible. This reduces the Memory::* calls by the dma_pusher by a factor of 10.
2019-02-19vk_memory_manager: Implement memory managerReinUsesLisp3-0/+342
A memory manager object handles the memory allocations for a device. It allocates chunks of Vulkan memory objects and then suballocates.
2019-02-16Corrections, documenting and fixes.Fernando Sahmkow4-13/+14
2019-02-16audio_core/buffer: Make const and non-const getter for samples consistentLioncash2-2/+2
This way proper const/non-const selection can occur.
2019-02-16address_arbiter: Use nested namespaces where applicableLioncash2-8/+4
A fairly trivial change. Other sections of the codebase use nested namespaces instead of separate namespaces here. This one must have just been overlooked.
2019-02-16video_core: Remove usages of System::GetInstance() within the enginesLioncash9-23/+49
Avoids the use of the global accessor in favor of explicitly making the system a dependency within the interface.
2019-02-16Use u128 on Clock Cycles calculation.Fernando Sahmkow5-27/+32
2019-02-16Implement 128 bits Unsigned Integer Multiplication and Division.Fernando Sahmkow3-0/+50
2019-02-16Correct CNTPCT to use Clock Cycles instead of Cpu Cycles.Fernando Sahmkow3-2/+13
2019-02-16core_timing: Convert core timing into a classLioncash53-412/+548
Gets rid of the largest set of mutable global state within the core. This also paves a way for eliminating usages of GetInstance() on the System class as a follow-up. Note that no behavioral changes have been made, and this simply extracts the functionality into a class. This also has the benefit of making dependencies on the core timing functionality explicit within the relevant interfaces.
2019-02-15Adressed review commentsB3n302-7/+9
2019-02-15threadsafe_queue: Add WaitIfEmpty and use it in loggingB3n303-14/+26
2019-02-15renderer_opengl: respect the sRGB colorspace for the screenshot featurefearlessTobi1-1/+2
Previously, we were completely ignoring for screenshots whether the game uses RGB or sRGB. This resulted in screenshot colors that looked off for some titles.
2019-02-15gl_state: Synchronize gl_state even when state is disabledReinUsesLisp1-83/+61
There are some potential edge cases where gl_state may fail to track the state if a related state changes while the toggle is disabled or it didn't change. This addresses that.
2019-02-14vk_resource_manager: Implement a command buffer pool with VKFencedPoolReinUsesLisp2-1/+59
2019-02-14vk_resource_manager: Add VKFencedPool interfaceReinUsesLisp2-0/+83
Handles a pool of resources protected by fences. Manages resource overflow allocating more resources. This class is intended to be used through inheritance.
2019-02-14vk_resource_manager: Implement VKResourceManager and fence allocatorReinUsesLisp2-0/+85
CommitFence iterates a pool of fences until one is found. If all fences are being used at the same time, allocate more.
2019-02-14vk_resource_manager: Implement VKFenceWatchReinUsesLisp2-0/+68
A fence watch is used to keep track of the usage of a fence and protect a resource or set of resources without having to inherit from their handlers.
2019-02-14vk_resource_manager: Implement VKFenceReinUsesLisp2-0/+131
Fences take ownership of objects, protecting them from GPU-side or driver-side concurrent access. They must be commited from the resource manager. Their usage flow is: commit the fence from the resource manager, protect resources with it and use them, send the fence to an execution queue and Wait for it if needed and then call Release. Used resources will automatically be signaled when they are free to be reused.
2019-02-14vk_resource_manager: Add VKResource interfaceReinUsesLisp3-1/+43
VKResource is an interface that gets signaled by a fence when it is free to be reused.
2019-02-14shader_decompiler: Improve Accuracy of Attribute Interpolation.Fernando Sahmkow6-38/+74
2019-02-13rasterizer_cache_gl: Only do fast layered copy on the same format. AsFernando Sahmkow1-1/+5
glCopyImageSubData does not support different formats.
2019-02-13Make bitfield assignment operator publicfearlessTobi1-6/+2
This change needs to be made to get the code compiling again. It was suggested after a conversation with Lioncash. The conversation can be seen here: https://user-images.githubusercontent.com/20753089/45064197-b6107800-b0b2-11e8-9db8-f696299fb86a.PNG
2019-02-13threadsafe_queue: Use std::size_t for representing sizeLioncash1-7/+6
Makes it consistent with the regular standard containers in terms of size representation. This also gets rid of dependence on our own type aliases, removing the need for an include.
2019-02-13threadsafe_queue: Remove NeedSize template parameterLioncash2-15/+13
The necessity of this parameter is dubious at best, and in 2019 probably offers completely negligible savings as opposed to just leaving this enabled. This removes it and simplifies the overall interface.
2019-02-13core_timing: Make EmptyTimedCallback a local variableLioncash1-3/+3
Given this is only used in one place, it can be moved closest to its usage site.
2019-02-13vk_device: Abstract device handling into a classReinUsesLisp3-1/+351
VKDevice contains all the data required to manage and initialize a physical device. Its intention is to be passed across Vulkan objects to query device-specific data (for example the logical device and the dispatch loader).
2019-02-13renderer_opengl: Remove reference to global system instanceLioncash1-3/+3
We already store a reference to the system instance that the renderer is created with, so we don't need to refer to the system instance via Core::System::GetInstance()
2019-02-12gl_rasterizer_cache: Remove unnecessary newlineLioncash1-2/+0
2019-02-12gl_rasterizer_cache: Get rid of variable shadowingLioncash1-6/+14
Avoids shadowing the members of the struct itself, which results in a -Wshadow warning.
2019-02-12renderer_vulkan: Add declarations fileReinUsesLisp2-0/+52
This file is intended to be included instead of vulkan/vulkan.hpp. It includes declarations of unique handlers using a dynamic dispatcher instead of a static one (which would require linking to a Vulkan library).
2019-02-12logging: Add Vulkan backend logging class typeReinUsesLisp2-0/+2
2019-02-12gl_shader_decompiler: Re-implement TLDS lodReinUsesLisp2-22/+35
2019-02-12core_timing: Rename CoreTiming namespace to Core::TimingLioncash35-174/+172
Places all of the timing-related functionality under the existing Core namespace to keep things consistent, rather than having the timing utilities sitting in its own completely separate namespace.
2019-02-11Corrected F2I None mode to RoundEven.Fernando Sahmkow2-4/+4
2019-02-11Fix incorrect value for CC bit in IADDFernando Sahmkow1-2/+2
2019-02-10kepler_compute: Fixup assert and rename enginesReinUsesLisp6-52/+59
When I originally added the compute assert I used the wrong documentation. This addresses that. The dispatch register was tested with homebrew against hardware and is triggered by some games (e.g. Super Mario Odyssey). What exactly is missing to get a valid program bound by this engine requires more investigation.
2019-02-09Implement BGRA8 framebuffer formatgreggameplayer3-0/+4
2019-02-09Implement linear textures (#2089)Fernando Sahmkow2-5/+39
2019-02-08gl_rasterizer_cache: Fixup texture view parametersReinUsesLisp1-2/+2
These parameters were declared as constants and passed to glTextureView but then they were removed on a rabase. This addresses that mistake.
2019-02-08nvdisp_disp0: change drawing message log level from Warning to TraceTobias1-3/+3
This is a leftover from the early yuzu days. We shouldn't log every time when we are drawing by default, so let's change the log level to Trace.
2019-02-07shader_ir: Remove F4 prefix to texture operationsReinUsesLisp3-26/+25
This was originally included because texture operations returned a vec4. These operations now return a single float and the F4 prefix doesn't mean anything.
2019-02-07shader_ir: Clean texture management codeReinUsesLisp3-133/+104
Previous code relied on GLSL parameter order (something that's always ill-formed on an IR design). This approach passes spatial coordiantes through operation nodes and array and depth compare values in the the texture metadata. It still contains an "extra" vector containing generic nodes for bias and component index (for example) which is still a bit ill-formed but it should be better than the previous approach.
2019-02-07gl_rasterizer_cache: Mark surface copy destinations as modified.bunnei2-4/+18
2019-02-07gl_rasterizer: Implement a more accurate fermi 2D copy.bunnei7-68/+188
- This is a blit, use the blit registers.
2019-02-07cmake: Fix title bar issueReinUsesLisp1-1/+14
2019-02-07gl_shader_disk_cache: Check LZ4 size limitFrederic L1-0/+4
Co-Authored-By: ReinUsesLisp <reinuseslisp@airmail.cc>
2019-02-07gl_shader_disk_cache: Consider compressed size zero as an errorFrederic L1-2/+2
Co-Authored-By: ReinUsesLisp <reinuseslisp@airmail.cc>
2019-02-07cmake: Use CMAKE_COMMAND instead of "cmake"Frederic L1-1/+1
Co-Authored-By: ReinUsesLisp <reinuseslisp@airmail.cc>
2019-02-07gl_shader_disk_cache: Use unordered containersReinUsesLisp4-56/+64
2019-02-07gl_shader_cache: Fixup GLSL unique identifiersReinUsesLisp2-3/+3
2019-02-07loading_screen: Unchunk progress barReinUsesLisp1-1/+3
2019-02-07gl_shader_cache: Link loading screen with disk shader cache loadReinUsesLisp10-12/+62
2019-02-07gl_shader_cache: Set GL_PROGRAM_SEPARABLE to dumped shadersReinUsesLisp1-0/+1
i965 (and probably all mesa drivers) require GL_PROGRAM_SEPARABLE when using glProgramBinary. This is probably required by the standard but it's ignored by permisive proprietary drivers.
2019-02-07gl_shader_disk_cache: Pass core system as argument and guard against games without title idsReinUsesLisp11-18/+58
2019-02-07gl_shader_disk_cache: Guard reads and writes against failureReinUsesLisp2-216/+339
2019-02-07gl_shader_disk_cache: Address miscellaneous feedbackReinUsesLisp5-43/+57
2019-02-07gl_shader_disk_cache: Pass return values returning instead of by parametersReinUsesLisp3-39/+37
2019-02-07gl_shader_disk_cache: Compress program binaries using LZ4ReinUsesLisp1-7/+28
2019-02-07gl_shader_disk_cache: Compress GLSL code using LZ4ReinUsesLisp2-6/+57
2019-02-07gl_shader_disk_cache: Save GLSL and entries into the precompiled fileReinUsesLisp9-135/+234
2019-02-07settings: Hide shader cache behind a settingReinUsesLisp8-0/+42
2019-02-07gl_shader_disk_cache: Invalidate shader cache changes with CMake hashReinUsesLisp4-46/+72
2019-02-07gl_shader_cache: Refactor to support disk shader cacheReinUsesLisp2-121/+388
2019-02-07gl_shader_disk_cache: Add transferable cache invalidationReinUsesLisp2-0/+8
2019-02-07gl_shader_disk_cache: Add precompiled loadReinUsesLisp2-0/+45
2019-02-07gl_shader_disk_cache: Add precompiled saveReinUsesLisp2-0/+57
2019-02-07gl_shader_disk_cache: Add transferable loadReinUsesLisp2-0/+56
2019-02-07gl_shader_disk_cache: Add transferable storesReinUsesLisp2-0/+194
2019-02-07gl_shader_disk_cache: Add ShaderDiskCacheOpenGL class and helpersReinUsesLisp2-0/+76
2019-02-07gl_shader_disk_cache: Add file and move BaseBindings declarationReinUsesLisp4-10/+58
2019-02-07gl_shader_decompiler: Remove name entriesReinUsesLisp2-28/+10
2019-02-07gl_shader_util: Add parameter to handle retrievable programsReinUsesLisp3-6/+10
2019-02-07rasterizer_interface: Add disk cache entry for the rasterizerReinUsesLisp6-0/+17
2019-02-07file_util: Add shader directoryReinUsesLisp3-0/+3
2019-02-07shader_decode: Implement LDG and basic cbuf trackingReinUsesLisp1-0/+33
2019-02-06gdbstub: only let Execute breakpoints write/restore BKPT opcodes into target memoryDimitri ALBORA1-4/+10
2019-02-06remove all occurance of specifying endianness inside BitFieldWeiyi Wang6-96/+96
This commit it automatically generated by command in zsh: sed -i -- 's/BitField<\(.*\)_le>/BitField<\1>/g' **/*(D.) BitField is now aware to endianness and default to little endian. It expects a value representation type without storage specification for its template parameter.
2019-02-06common/bitfield: make it endianness-awareWeiyi Wang3-3/+100
2019-02-06common/swap: remove default value for swap type internal storageWeiyi Wang1-1/+1
This is compromise for swap type being used in union. A union has deleted default constructor if it has at least one variant member with non-trivial default constructor, and no variant member of T has a default member initializer. In the use case of Bitfield, all variant members will be the swap type on endianness mismatch, which would all have non-trivial default constructor if default value is specified, and non of them can have member initializer
2019-02-06common/swap: use template and tag for LE/BE specificationWeiyi Wang1-39/+91
The tag can be useful for other type-generic templates like BitFields to forward the endianness specification
2019-02-06common/swap: add swap template for enumWeiyi Wang1-0/+52
2019-02-06QT: Fix the loading screen 'H' switch logo to not glitch outJames Rowe1-1/+4
2019-02-06service/nvflinger,service/vi: Handle failure cases with exposed APILioncash4-47/+133
Converts many of the Find* functions to return a std::optional<T> as opposed to returning the raw return values directly. This allows removing a few assertions and handles error cases like the service itself does.
2019-02-05Fix crash when no files are selectedxperia641-6/+6
2019-02-05Add file extension to screenshot filename if not providedxperia641-3/+7
2019-02-05service/nvflinger: Mark FindVsyncEvent() as a const member functionLioncash2-2/+2
This member function doesn't actually modify instance state, so it can be marked as a const member function.
2019-02-05service/nvflinger: Rename GetVsyncEvent() to FindVsyncEvent()Lioncash3-3/+3
This was missed within #2075. Renames the member function to make it consistent with the rest of the Find* functions.
2019-02-05video_core/texture: Fix BitField size for depth_minus_oneReinUsesLisp1-1/+1
2019-02-04Update src/video_core/engines/shader_bytecode.hMat M1-1/+1
Co-Authored-By: FernandoS27 <fsahmkow27@gmail.com>
2019-02-03Fix TXQ not using the component mask.Fernando Sahmkow2-6/+13
2019-02-03shader_ir/memory: Add ST_L 64 and 128 bits storesReinUsesLisp1-3/+11
2019-02-03shader/track: Search inside of conditional nodesReinUsesLisp1-0/+11
Some games search conditionally use global memory instructions. This allows the heuristic to search inside conditional nodes for the source constant buffer.
2019-02-03shader_ir: Rename BasicBlock to NodeBlockReinUsesLisp30-122/+120
It's not always used as a basic block. Rename it for consistency.
2019-02-03shader_ir: Pass decoded nodes as a whole instead of per basic blocksReinUsesLisp27-57/+62
Some games call LDG at the top of a basic block, making the tracking heuristic to fail. This commit lets the heuristic the decoded nodes as a whole instead of per basic blocks. This may lead to some false positives but allows it the heuristic to track cases it previously couldn't.
2019-02-03video_core: Assert on invalid GPU to CPU address queriesReinUsesLisp8-47/+67
2019-02-03maxwell_3d: Allow sampler handles with TSC id zeroReinUsesLisp1-10/+6
2019-02-03maxwell_3d: Allow texture handles with TIC id zeroReinUsesLisp3-21/+7
Also remove "enabled" field from Tegra::Texture::FullTextureInfo because it would become unused.
2019-02-03memory_manager: Check for reserved page statusReinUsesLisp1-1/+2
2019-02-03shader_ir/memory: Add LD_L 128 bits loadsReinUsesLisp1-7/+19
2019-02-03shader_bytecode: Rename BytesN enums to BitsNReinUsesLisp2-7/+7
2019-02-03shader_ir/memory: Add LD_L 64 bits loadsReinUsesLisp1-6/+17
2019-02-01rasterizer_interface: Remove unused AccelerateFill operationReinUsesLisp3-11/+0
2019-02-01video_core: Remove unused Fill surface typeReinUsesLisp2-6/+1
2019-02-01kernel: Remove the Timer classLioncash9-259/+0
A holdover from citra, the Horizon kernel on the switch has no prominent kernel object that functions as a timer. At least not to the degree of sophistication that this class provided. As such, this can be removed entirely. This class also wasn't used at all in any meaningful way within the core, so this was just code sitting around doing nothing. This also allows removing a few things from the main KernelCore class that allows it to use slightly less resources overall (though very minor and not anything really noticeable).
2019-01-30gl_rasterizer_cache: Fixup test clauseReinUsesLisp1-6/+5
2019-01-30gl_rasterizer_cache: Guard clause swizzle testingMat M1-1/+3
Co-Authored-By: ReinUsesLisp <reinuseslisp@airmail.cc>
2019-01-30gl_state: Remove texture target trackingReinUsesLisp2-5/+0
2019-01-30gl_rasterizer_cache: Move swizzling to textures instead of stateReinUsesLisp6-28/+35
2019-01-30gl_state: Use DSA and multi bind to update texture bindingsReinUsesLisp1-8/+22
2019-01-30gl_rasterizer: Use DSA for texturesReinUsesLisp5-185/+105
2019-01-30kernel/wait_object: Devirtualize functions related to manipulating the thread list directlyLioncash1-3/+3
No inheritors of the WaitObject class actually make use of their own implementations of these functions, so they can be made non-virtual. It's also kind of sketchy to allow overriding how the threads get added to the list anyways, given the kernel itself on the actual hardware doesn't seem to customize based off this.
2019-01-30kernel/timer: Remove unnecessary WakeupAllWaitingThreads() overrideLioncash2-6/+0
This implementation just calls the base class variant of the function, so this isn't necessary.
2019-01-30kernel/readable_event: Remove unnecessary WakeupAllWaitingThreads() overrideLioncash2-6/+0
This just calls the base variant of the function, so it can be removed.
2019-01-30video_core/dma_pusher: Silence C4828 warningsLioncash1-1/+1
This was previously causing: warning C4828: The file contains a character starting at offset 0xa33 that is illegal in the current source character set (codepage 65001). warnings on Windows when compiling yuzu.
2019-01-30hwopus: Implement DecodeInterleavedLioncash1-4/+35
This functions almost identically to DecodeInterleavedWithPerfOld, however this function also has the ability to reset the decoder context. This is documented as a potentially desirable thing in the libopus manual in some circumstances as it says for the OPUS_RESET_STATE ctl: "This should be called when switching streams in order to prevent the back to back decoding from giving different result from one at a time decoding."
2019-01-30service/nvflinger: Make FindBufferQueueId() a const member functionLioncash2-2/+26
This member function doesn't actually modify instance state, so it can be const-qualified.
2019-01-30service/nvflinger: Rename Get prefix on function to FindLioncash3-23/+23
This more accurately describes what the function is actually attempting to do (it's not a simple trivial getter).
2019-01-30shader_ir: Unify constant buffer offset valuesReinUsesLisp17-25/+36
Constant buffer values on the shader IR were using different offsets if the access direct or indirect. cbuf34 has a non-multiplied offset while cbuf36 does. On shader decoding this commit multiplies it by four on cbuf34 queries.
2019-01-30hwopus: Deduplicate the decoding code within DecodeInterleavedOld and DecodeInterleavedWithPerfOldLioncash1-19/+14
Keeps the logic in one spot for use by both functions.
2019-01-30hwopus: Replace std::optional<std::reference_wrapper<u64>> with u64*Lioncash1-9/+6
This doesn't really offer anything over the use of a direct pointer, so we can just use that instead.
2019-01-30hwopus: Mark local variables as const where applicableLioncash1-8/+16
Makes non-mutable state more explicit.
2019-01-30hwopus: Fill in the rest of the unknown service function namesLioncash1-9/+11
Filled in via information provided by SwitchBrew.
2019-01-30service/ns: Update function tablesLioncash1-14/+20
Updates function tables based off information provided by SwitchBrew
2019-01-30service/ncm: Update function tablesLioncash1-4/+4
Updates function tables based off information provided by SwitchBrew
2019-01-30service/audio: Update function tablesLioncash4-8/+23
Updates function tables based off information provided by SwitchBrew.
2019-01-30service/am/applet_ae: Update function tablesLioncash1-1/+2
Updates function tables based off information provided by SwitchBrew.
2019-01-30service/fsp-srv: Update function tablesLioncash2-17/+25
Updates function tables based off information provided by SwitchBrew.
2019-01-30service/btm: Update function tablesLioncash1-55/+97
Updates function tables based off information provided by SwitchBrew
2019-01-30service/btdrv: Update function tablesLioncash1-46/+101
Updates function tables based off information provided by SwitchBrew.
2019-01-30gl_shader_cache: Use explicit bindingsReinUsesLisp7-249/+194
2019-01-30gl_rasterizer: Implement global memory managementReinUsesLisp6-4/+140
2019-01-30shader_decode: Implement LDG and basic cbuf trackingReinUsesLisp7-10/+240
2019-01-30video_core/GPU Implemented the GPU PFIFO puller semaphore operations. (#1908)Kevin2-12/+242
* Implemented the puller semaphore operations. * Nit: Fix 2 style issues * Nit: Add Break to default case. * Fix style. * Update for comments. Added ReferenceCount method * Forgot to remove GpuSmaphoreAddress union. * Fix the clang-format issues. * More clang formatting. * two more white spaces for the Clang formatting. * Move puller members into the regs union * Updated to use Memory::WriteBlock instead of Memory::Write* * Fix clang style issues * White space clang error * Removing unused funcitons and other pr comment * Removing unused funcitons and other pr comment * More union magic for setting regs value. * union magic refcnt as well * Remove local var * Set up the regs and regs_assert_positions up properly * Fix clang error
2019-01-30gl_shader_cache: Fix texture view for cubemaps as cubemap arraysReinUsesLisp4-3/+28
Cubemaps are considered layered and to create a texture view the texture mustn't be a layered texture, resulting in cubemaps being bound as cubemap arrays. To fix this issue this commit introduces an extra surface parameter called "is_array" and uses this to query for texture view creation. Now that texture views for cubemaps are actually being created, this also fixes the number of layers created for the texture view (since they have to be 6 to create a texture view of cubemaps).
2019-01-30gl_rasterizer: Workaround invalid zeta clearsReinUsesLisp2-14/+19
Some games (like Xenoblade Chronicles 2) clear both depth and stencil buffers while there's a depth-only texture attached (e.g. D16 Unorm). This commit reads the zeta format of the bound surface on ConfigureFramebuffers and returns if depth and/or stencil attachments were set. This is ignored on DrawArrays but on Clear it's used to just clear those attachments, bypassing an OpenGL error.
2019-01-30service/psc: Update function tablesLioncash1-8/+9
Updates the function tables based off information on SwitchBrew. Gets rid of a swath of unknown names.
2019-01-30nvflinger: Add the Null displayLioncash1-1/+2
In addition to the default, external, EDID, and internal displays, there's also a null display provided as well, which as the name suggests, does nothing but discard all commands given to it. This is provided for completeness.
2019-01-30nvflinger: Change log message in OpenDisplay to be a debug log instead of a warningLioncash1-1/+1
Opening a display isn't really a thing to warn about. It's an expected thing, so this can be a debug log. This also alters the string to indicate the display name better. Opening "Default" display reads a little nicer compared to Opening display Default.
2019-01-30nvflinger: Remove unnecessary header inclusionsLioncash1-2/+0
2019-01-30nvflinger: Mark locals const where applicableLioncash1-11/+11
Makes non-mutable state more explicit.
2019-01-30nvflinger: Use a std::array for the available displays instead of std::vectorLioncash2-7/+7
The built-in set of displays is fixed, so we can utilize an array instead of a vector here.
2019-01-30hle/ipc_helpers: Fix clang-format warningsLioncash1-1/+0
2019-01-29hle/ipc_helpers: Allow pushing signed valuesLioncash1-0/+22
This is kind of a large hole in the API, given we allow popping signed values. This fixes that.
2019-01-28service/pm: Implement SetMaintenanceBoot()Lioncash1-1/+10
This quite literally functions as a basic setter. No other error checking or anything (since there's nothing to really check against). With this, it completes the pm:bm interface in terms of functionality.
2019-01-28service/pm: Tidy up functionality related to SystemBootModeLioncash2-2/+9
Just minor tidying of interfaces.
2019-01-28service/vi: Remove stubbed notifier from SetLayerVisibilityLioncash1-2/+3
This appears to be a vestigial API function that's only kept around for compatibility's sake, given the function only returns a success error code and exits. Since that's the case, we can remove the stubbed notification from the log, since doing nothing is technically the correct behavior in this case.
2019-01-28shader/shader_ir: Amend three comment typosLioncash1-3/+3
Given we're in the area, these are three trivial typos that can be corrected.
2019-01-28shader/shader_ir: Amend constructor initializer ordering for AbufNodeLioncash1-2/+2
Orders the class members in the same order that they would actually be initialized in. Gets rid of two compiler warnings.
2019-01-28shader/decode: Avoid a pessimizing std::move within DecodeRange()Lioncash1-1/+1
std::moveing a local variable in a return statement has the potential to prevent copy elision from occurring, so this can just be converted into a regular return.
2019-01-27kernel/svc: Log out uncaught C++ exceptions from svcBreakLioncash1-0/+4
Looking into the implementation of the C++ standard facilities that seem to be within all modules, it appears that they use 7 as a break reason to indicate an uncaught C++ exception. This was primarily found via the third last function called within Horizon's equivalent of libcxxabi's demangling_terminate_handler(), which passes the value 0x80000007 to svcBreak.
2019-01-26dsp_interface: fix sound being played while volume is 0fearlessTobi1-1/+1
According to documentation, if the argument of std::exp is zero, one is returned. However we want the return value to be also zero in this case so no audio is played.
2019-01-26Use QPixmap/QIcon for background color selection buttonxperia642-7/+15
2019-01-26video_core: Silent implicit conversion warningReinUsesLisp1-3/+4
2019-01-24frontend: Refactor ScopeAcquireWindowContext out of renderer_opengl.bunnei7-36/+54
2019-01-22citra_qt: Log settings on launchzhupengfei5-0/+35
2019-01-22maxwell_3d: Set rt_separate_frag_data to 1 by defaultReinUsesLisp2-4/+6
Commercial games assume that this value is 1 but they never set it. On the other hand nouveau manually sets this register. On ConfigureFramebuffers we were asserting for what we are actually implementing (according to envytools).
2019-01-21Change const char* to const char[]James Rowe1-4/+4
2019-01-21Fix mingw compile error and warningsJames Rowe2-6/+6
2019-01-21Add fade out effect to the loading screenJames Rowe4-94/+158
2019-01-21Set Minimum Size to the same as renderwindowJames Rowe1-0/+1
2019-01-21Remove blue box around loading screenJames Rowe1-1/+0
2019-01-21Change the background color of Stage Complete to yuzu blueJames Rowe1-1/+1
2019-01-21Rename step 1 and step 2 to be a little more descriptiveJames Rowe2-8/+8
2019-01-21Prevent estimated time from flashing after slow shader compilation startsJames Rowe1-1/+1
2019-01-21Move progress bar style into constexpr stringsJames Rowe1-28/+32
2019-01-20Hide progress bar on Prepare stepJames Rowe1-7/+8
2019-01-20QT: Upgrade the Loading Bar to look much betterJames Rowe4-11/+201
2019-01-20Add a workaround if QMovie isn't availableJames Rowe2-1/+20
2019-01-20QT Frontend: Add a Loading screen with progressbarJames Rowe8-10/+239
With shader caches on the horizon, one requirement is to provide visible feedback for the progress. The shader cache reportedly takes several minutes to load for large caches that were invalidated, and as such we should provide a loading screen with progress. Adds a loading screen widget that will be shown until the first frame of the game is swapped. This was chosen in case shader caches are not being used, several games still take more than a few seconds to launch and could benefit from a loading screen.
2019-01-18file_sys/directory: Remove unused DirectoryBackend classLioncash1-23/+0
This isn't used at all, so we can just get rid of it.
2019-01-18gl_rasterizer: Silent unsafe mix warningReinUsesLisp1-1/+1
2019-01-17yuzu/configuration/configure_input_player: Forward declare types where applicableLioncash2-2/+7
Allows removing the inclusion of the main input common header from the UI config header.
2019-01-17yuzu/configuration/configure_touchscreen_advanced: Remove unnecessary header inclusionsLioncash1-2/+0
2019-01-17yuzu/configuration/configure_per_general: Remove unused header inclusionsLioncash2-4/+3
2019-01-17yuzu/configuration/configure_debug: Remove unused header inclusionsLioncash1-1/+0
2019-01-17yuzu/configuration/configure_system: Remove unused header inclusionsLioncash1-8/+4
2019-01-17yuzu/configuration/configure_web: Remove an unused lambda captureLioncash1-5/+4
'this' isn't actually used within the lambda, since what we need from the class is already assigned within the capture section of the lambda.
2019-01-17yuzu/configuration/configure_web: Use an ellipsis with 'Verifying' textLioncash1-1/+1
It's a common UI pattern to use an ellipsis to indicate an ongoing action, rather than just specifying the word by itself.
2019-01-17core/frontend/applets/web_browser: Include missing headersLioncash1-2/+8
Gets rid of a few indirect inclusions.
2019-01-17core/frontend/applets/web_browser: Make OpenPage() non-constLioncash7-20/+25
This is a function that definitely doesn't always have a non-modifying behavior across all implementations, so this should be made non-const. This gets rid of the need to mark data members as mutable to work around the fact mutating data members needs to occur.
2019-01-17yuzu/web_browser: std::move std::function instances in OpenPage()Lioncash1-2/+2
Avoids the need to potentially reallocate the contained callbacks.
2019-01-17yuzu/web_browser: Make slot functions privateLioncash1-2/+1
These currently aren't used by anything other than the QtWebBrowser class itself, and can be made private.
2019-01-16shader_ir: Fixup clang buildReinUsesLisp1-4/+6
2019-01-15loader: Propagate NCA logo section to ReadBanner and ReadLogoZach Hilman9-0/+61
2019-01-15content_archive: Add getter for logo section of NCAZach Hilman2-0/+16
2019-01-15gl_shader_decompiler: replace std::get<> with std::get_if<> for macOS compatibilityReinUsesLisp1-44/+58
2019-01-15gl_shader_decompiler: Inline textureGather componentReinUsesLisp1-15/+16
2019-01-15shader_decode: Fixup XMADReinUsesLisp1-1/+1
2019-01-15shader_ir: Pass to decoder functions basic block's codeReinUsesLisp27-82/+83
2019-01-15shader_decode: Improve zero flag implementationReinUsesLisp15-75/+79
2019-01-15shader_ir: Remove composite primitives and use temporals insteadReinUsesLisp4-241/+224
2019-01-15gl_shader_decompiler: Fixup AssignCompositeHalfReinUsesLisp1-1/+1
2019-01-15shader_decode: Use proper primitive namesReinUsesLisp4-25/+21
2019-01-15shader_decode: Use BitfieldExtract instead of shift + andReinUsesLisp8-48/+37
2019-01-15shader_ir: Remove Ipa primitiveReinUsesLisp3-13/+2
2019-01-15gl_shader_decompiler: Use rasterizer's UBO size limitReinUsesLisp1-1/+3
2019-01-15gl_shader_gen: Fixup code formattingReinUsesLisp2-18/+22
2019-01-15video_core: Rename glsl_decompiler to gl_shader_decompilerReinUsesLisp7-7/+7
2019-01-15shader_ir: Remove RZ and use Register::ZeroIndex insteadReinUsesLisp3-12/+16
2019-01-15shader_decode: Implement TEXS.F16ReinUsesLisp3-15/+57
2019-01-15shader_decode: Fixup R2PReinUsesLisp1-2/+3
2019-01-15glsl_decompiler: Fixup TLDSReinUsesLisp1-1/+0
2019-01-15glsl_decompiler: Fixup geometry shadersReinUsesLisp2-15/+17
2019-01-15shader_decode: Fixup WriteLogicOperation zero comparisonReinUsesLisp1-1/+1
2019-01-15glsl_decompiler: Fixup permissive member function declarationsReinUsesLisp1-133/+133
2019-01-15shader_decode: Fixup PSETReinUsesLisp1-2/+3
2019-01-15shader_decode: Fixup clang-formatReinUsesLisp2-2/+4
2019-01-15video_core: Implement IR based geometry shadersReinUsesLisp4-10/+102
2019-01-15shader_decode: Implement VMAD and VSETPReinUsesLisp5-2/+129
2019-01-15shader_decode: Implement HSET2ReinUsesLisp3-1/+50
2019-01-15shader_decode: Rework HSETP2ReinUsesLisp4-47/+57
2019-01-15shader_decode: Implement R2PReinUsesLisp1-1/+28
2019-01-15shader_decode: Implement CSETPReinUsesLisp1-14/+37
2019-01-15shader_decode: Implement PSETReinUsesLisp1-1/+16
2019-01-15shader_decode: Implement HFMA2ReinUsesLisp4-5/+60
2019-01-15glsl_decompiler: Remove HNegate inliningReinUsesLisp1-10/+0
2019-01-15shader_decode: Implement POPCReinUsesLisp4-1/+22
2019-01-15shader_decode: Implement TLDS (untested)ReinUsesLisp3-10/+92
2019-01-15shader_decode: Update TLD4 reflecting #1862 changesReinUsesLisp2-52/+52
2019-01-15shader_ir: Fixup TEX and TEXS and partially fix TLD4 decompilingReinUsesLisp3-60/+72
2019-01-15shader_decode: Fixup FSETReinUsesLisp1-2/+2
2019-01-15shader_decode: Implement IADD32IReinUsesLisp1-0/+11
2019-01-15shader_decode: Fixup clang-formatReinUsesLisp1-1/+1
2019-01-15video_core: Return safe values after an assert hitsReinUsesLisp8-8/+19
2019-01-15shader_decode: Implement FFMAReinUsesLisp1-1/+36
2019-01-15video_core: Address feedbackReinUsesLisp4-13/+16
2019-01-15shader_ir: Fixup file inclusions and clang-formatReinUsesLisp3-2/+2
2019-01-15shader_ir: Move comment node stringMat M1-2/+2
Co-Authored-By: ReinUsesLisp <reinuseslisp@airmail.cc>
2019-01-15shader_ir: Address feedback to avoid UB in bit castingReinUsesLisp1-2/+4
2019-01-15shader_decode: Fixup clang-formatReinUsesLisp2-3/+2
2019-01-15shader_decode: Implement LEAReinUsesLisp1-0/+55
2019-01-15shader_decode: Implement IADD3ReinUsesLisp1-0/+61
2019-01-15shader_decode: Implement LOP3ReinUsesLisp2-0/+62
2019-01-15shader_decode: Implement ST_LReinUsesLisp1-0/+17
2019-01-15shader_decode: Implement LD_LReinUsesLisp1-0/+18
2019-01-15shader_decode: Implement HSETP2ReinUsesLisp1-1/+37
2019-01-15shader_decode: Implement HADD2 and HMUL2ReinUsesLisp1-1/+48
2019-01-15shader_decode: Implement HADD2_IMM and HMUL2_IMMReinUsesLisp1-1/+28
2019-01-15shader_decode: Implement MOV_SYSReinUsesLisp1-0/+27
2019-01-15shader_decode: Implement IMNMXReinUsesLisp1-0/+16
2019-01-15shader_decode: Implement F2F_CReinUsesLisp1-2/+10
2019-01-15shader_decode: Implement I2IReinUsesLisp1-0/+26
2019-01-15shader_decode: Implement BRA internal flagReinUsesLisp1-4/+8
2019-01-15shader_decode: Implement ISCADDReinUsesLisp1-0/+15
2019-01-15shader_decode: Implement XMADReinUsesLisp1-1/+85
2019-01-15shader_decode: Implement PBK and BRKReinUsesLisp1-1/+22
2019-01-15shader_decode: Implement LOPReinUsesLisp1-0/+15
2019-01-15shader_decode: Implement SELReinUsesLisp1-0/+8
2019-01-15shader_decode: Implement IADDReinUsesLisp1-1/+28
2019-01-15shader_decode: Implement ISETPReinUsesLisp1-1/+30
2019-01-15shader_decode: Implement BFIReinUsesLisp1-1/+22
2019-01-15shader_decode: Implement ISETReinUsesLisp1-1/+27
2019-01-15shader_decode: Implement LD_CReinUsesLisp1-0/+31
2019-01-15shader_decode: Implement SHLReinUsesLisp1-0/+8
2019-01-15shader_decode: Implement SHRReinUsesLisp1-1/+26
2019-01-15shader_decode: Implement LOP32IReinUsesLisp2-1/+72
2019-01-15shader_decode: Implement BFEReinUsesLisp1-1/+25
2019-01-15shader_decode: Implement FSETReinUsesLisp1-1/+36
2019-01-15shader_decode: Implement F2IReinUsesLisp1-0/+37
2019-01-15shader_decode: Implement I2FReinUsesLisp1-0/+23
2019-01-15shader_decode: Implement F2FReinUsesLisp1-1/+37
2019-01-15shader_decode: Stub DEPBARReinUsesLisp1-0/+4
2019-01-15shader_decode: Implement SSY and SYNCReinUsesLisp1-0/+19
2019-01-15shader_decode: Implement PSETPReinUsesLisp1-1/+21
2019-01-15shader_decode: Implement TMMLReinUsesLisp1-3/+45
2019-01-15shader_decode: Implement TEX and TXQReinUsesLisp2-0/+223
2019-01-15shader_decode: Implement TEXS (F32)ReinUsesLisp2-0/+217
2019-01-15shader_decode: Implement FSETPReinUsesLisp1-1/+33
2019-01-15shader_decode: Partially implement BRAReinUsesLisp1-0/+12
2019-01-15shader_decode: Implement IPAReinUsesLisp1-0/+12
2019-01-15shader_decode: Implement EXITReinUsesLisp1-1/+32
2019-01-15shader_decode: Implement ST_AReinUsesLisp1-0/+30
2019-01-15shader_decode: Implement LD_AReinUsesLisp1-1/+39
2019-01-15shader_decode: Implement FADD32IReinUsesLisp1-0/+12
2019-01-15shader_decode: Implement FMUL32_IMMReinUsesLisp1-0/+10
2019-01-15shader_decode: Implement MOV32_IMMReinUsesLisp1-1/+9
2019-01-15shader_decode: Stub RRO_C, RRO_R and RRO_IMMReinUsesLisp1-0/+9
2019-01-15shader_decode: Implement FMNMX_C, FMNMX_R and FMNMX_IMMReinUsesLisp1-0/+18
2019-01-15shader_decode: Implement MUFUReinUsesLisp1-0/+29
2019-01-15shader_decode: Implement FADD_C, FADD_R and FADD_IMMReinUsesLisp1-0/+15
2019-01-15shader_decode: Implement FMUL_C, FMUL_R and FMUL_IMMReinUsesLisp1-0/+42
2019-01-15shader_decode: Implement MOV_C and MOV_RReinUsesLisp1-1/+23
2019-01-15video_core: Replace gl_shader_decompilerReinUsesLisp8-4185/+57
2019-01-15glsl_decompiler: ImplementationReinUsesLisp3-0/+1483
2019-01-15shader_ir: Add condition code helperReinUsesLisp2-0/+13
2019-01-15shader_ir: Add predicate combiner helperReinUsesLisp2-0/+15
2019-01-15shader_ir: Add comparison helpersReinUsesLisp2-0/+106
2019-01-15shader_ir: Add half float helpersReinUsesLisp2-0/+44
2019-01-15shader_ir: Add integer helpersReinUsesLisp2-0/+40
2019-01-15shader_ir: Add float helpersReinUsesLisp2-0/+24
2019-01-15shader_ir: Add settersReinUsesLisp2-0/+24
2019-01-15shader_ir: Add local memory gettersReinUsesLisp2-0/+7
2019-01-15shader_ir: Add internal flag gettersReinUsesLisp2-0/+10
2019-01-15shader_ir: Add attribute gettersReinUsesLisp2-0/+26
2019-01-15shader_ir: Add constant buffer gettersReinUsesLisp2-0/+25
2019-01-15shader_ir: Add register getterReinUsesLisp2-0/+9
2019-01-15shader_ir: Add immediate node constructorsReinUsesLisp2-1/+34
2019-01-15shader_ir: Initial implementationReinUsesLisp30-0/+1573
2019-01-15shader_bytecode: Fixup encodingReinUsesLisp1-1/+1
2019-01-15shader_header: Make local memory size getter constantReinUsesLisp1-1/+1
2019-01-14audio_core: remove unnecessary spaces on commentsOtávio Pace1-2/+2
2019-01-09gl_rasterizer: Workaround Intel VAO DSA bugReinUsesLisp3-7/+16
There is a bug on Intel's blob driver where it fails to properly build a vertex array object if it's not bound even after creating it with glCreateVertexArrays. This workaround binds it after creating it to bypass the issue.
2019-01-08gl_global_cache: Add dummy global cache managerReinUsesLisp5-3/+96
2019-01-08settings: Fix comment structureZach Hilman2-5/+7
2019-01-08settings: Use std::chrono::seconds instead of s64 for RTCZach Hilman6-17/+21
2019-01-08time: Use custom RTC settings if applicable for gameZach Hilman2-8/+12
2019-01-08core: Set custom RTC differential on game bootZach Hilman1-0/+7
2019-01-08qt: Provide UI to edit custom RTC settingsZach Hilman2-28/+66
2019-01-08settings: Add custom RTC settingsZach Hilman4-4/+30
Stored as signed seconds since epoch.
2019-01-07gl_rasterizer: Skip framebuffer configuration if rendertargets have not been changedReinUsesLisp2-1/+31
2019-01-07gl_rasterizer_cache: Use dirty flags for the depth bufferReinUsesLisp4-3/+23
2019-01-07gl_rasterizer_cache: Use dirty flags for color buffersReinUsesLisp4-4/+24
2019-01-07gl_shader_cache: Use dirty flags for shadersReinUsesLisp5-2/+23
2019-01-06gl_stream_buffer: Use DSA for buffer managementReinUsesLisp3-17/+14
2019-01-06gl_rasterizer: Use DSA for vertex array objectsReinUsesLisp6-79/+53
2019-01-06gl_state: Drop uniform buffer state trackingReinUsesLisp3-10/+0
2019-01-05gl_rasterizer_cache: Use GL_STREAM_COPY for PBOsReinUsesLisp1-1/+1
Since the data is doing the path CPU -> GPU -> GPU copy is the most approximate hint. Using GL_STREAM_DRAW generated a performance warning on Nvidia's stack. Changing this hint removed the warning.
2019-01-05service/vi: Correct scaling mode conversionsLioncash1-15/+13
These values are not equivalent, based off RE. The internal value is put into a lookup table with the following values: [3, 0, 1, 2, 4] So the values absolutely do not map 1:1 like the comment was indicating.
2019-01-05service/vi: Factor out scaling mode conversions from the IPC function itselfLioncash1-17/+21
Avoids entangling the IPC buffer appending with the actual operation of converting the scaling values over. This also inserts the proper error handling for invalid scaling values.
2019-01-05service/vi: Unstub IApplicationDisplayService' SetLayerScalingMode()Lioncash1-21/+38
This appears to only check if the scaling mode can actually be handled, rather than actually setting the scaling mode for the layer. This implements the same error handling performed on the passed in values.
2019-01-05service/vi: Correct reported dimensions from IApplicationDisplayService's GetDisplayResolution()Lioncash1-12/+8
Within the actual service, it makes no distinguishing between docked and undocked modes. This will always return the constants values reporting 1280x720 as the dimensions.
2019-01-04qt: Move profile manager to own UI tabZach Hilman9-427/+565
2019-01-04Removed pulse event typeDavid Marcec4-9/+0
Pulse is considered a hack and nothing should be using it. We should completely remove it
2019-01-04Return no application area when games try to open an application areaDavid Marcec1-4/+4
This will prompt CreateApplicationArea
2019-01-04Proper no message handling for AM::PopMessageDavid Marcec1-1/+10
When we have no messages, we should be returning an error code.
2019-01-03 Fixed botw deadlock(and possibly 30 fps games rendering too fast? needs testing to confirm)David Marcec1-1/+1
Upon investigating the issue with #1878, I found that games are the ones who handle the vsync event resetting and not us.
2019-01-03service/vi: Implement SetDisplayEnabled()Lioncash1-1/+10
This IPC command is simply a stub inside the actual service itself, and just returns a successful error code regardless of input. This is likely only retained in the service interface to not break older code that relied upon it succeeding in some way.
2019-01-03service/vi: Log more information where applicableLioncash1-63/+74
In many cases, we didn't bother to log out any of the popped data members. This logs them out to the console within the logging call to provide more contextual information.
2019-01-03service/vi: Implement OpenDefaultDisplay in terms of OpenDisplayLioncash1-4/+17
Internally within the vi services, this is essentially all that OpenDefaultDisplay does, so it's trivial to just do the same, and forward the default display string into the function.
2019-01-02service/vi: Correct initial width and height valuesLioncash1-2/+2
Based off RE, it appears that almost all display types seem to use 1920x1080 except for a few (null display, edid display).
2019-01-02service/vi: Document unknown DisplayInfo struct membersLioncash1-2/+13
It appears that the two members indicate whether a display has a bounded number of layers (and if set, the second member indicates the total number of layers).
2019-01-01yuzu/configure_general: Silence truncation warnings in loadConfiguration()Lioncash1-2/+2
The QPixmap API expects an unsigned int.
2019-01-01yuzu/config: Silence truncation warningsLioncash1-1/+1
2019-01-01core/kernel: Remove unnecessary inclusionsLioncash16-16/+22
Gets rid of a few unnecessary header dependencies in some source files.
2018-12-31kernel/svc: Correct misleading error message within CreateThread()Lioncash1-2/+3
This is a bounds check to ensure that the thread priority is within the valid range of 0-64. If it exceeds 64, that doesn't necessarily mean that an actual priority of 64 was expected (it actually means whoever called the function screwed up their math). Instead clarify the message to indicate the allowed range of thread priorities.
2018-12-31kernel/svc: Sanitize core number and thread priorities in CreateThread()Lioncash1-6/+17
Now that we handle the kernel capability descriptors we can correct CreateThread to properly check against the core and priority masks like the actual kernel does.
2018-12-31kernel/process: Rename GetAllowedProcessorMask() and GetAllowedThreadPriorityMask()Lioncash2-11/+11
Makes them consistent with their kernel capability counterparts.
2018-12-31kernel/svc: Simplify thread core ID sanitizing in CreateThreadLioncash1-7/+1
Rather than use a switch here, this can be collapsed into a simple range check, which is a little easier on the eyes.
2018-12-31arm_interface: Make include path relative for arm_interface.hLioncash1-1/+1
Makes it consistent with the rest of the includes.
2018-12-31arm_interface: Make LogBacktrace() a const member functionLioncash2-2/+2
This function doesn't modify instance state, so it can be made const.
2018-12-31arm_interface: Mark variables as const where applicable in LogBacktrace()Lioncash1-3/+4
Two of these variables have fixed values, so we can make that immediately obvious from the get-go.
2018-12-31arm_interface: Remove unnecessary semicolonLioncash1-1/+1
Namespaces don't require the use of a semicolon. Silences a -Wextra-semi warning.
2018-12-30gl_rasterizer_cache: Texture view if shader samples array but OGL is notReinUsesLisp3-14/+74
When a shader samples a texture array but that texture in OpenGL is created without layers, use a texture view to increase the texture hierarchy. For example, instead of binding a GL_TEXTURE_2D bind a GL_TEXTURE_2D_ARRAY view.
2018-12-30service/time: Minor cleanup to GetClockSnapshot()Lioncash1-7/+9
Moves some variables closer to their actual usage sites.
2018-12-30service/time: Fill in some structures and remove padding where not necessaryLioncash2-7/+9
2018-12-29Moved log backtrace to arm_interface.cpp. Added printing of error code to fatalDavid Marcec4-18/+36
2018-12-29travis: Use correct package for linux Qt5WebEngineZach Hilman3-4/+3
2018-12-29web_browser: Add bounds checking to applet interfaceZach Hilman10-146/+160
2018-12-28gpu: Remove PixelFormat G8R8U and G8R8S, as they do not seem to exist.bunnei4-79/+46
- Fixes UI rendering issues in The Legend of Zelda: Breath of the Wild.
2018-12-28main: Add main window integrations for QtWebBrowserAppletZach Hilman3-0/+168
2018-12-28qt: Implement Qt frontend to web browserZach Hilman2-0/+154
Using a custom reimplementation of QWebEngineView and an injector script.
2018-12-28core: Add getter and setter for WebBrowserApplet frontendZach Hilman4-2/+22
2018-12-28frontend: Add frontend responder for web browserZach Hilman2-0/+52
2018-12-28applets: Implement LibAppletOff (Web) appletZach Hilman4-0/+234
2018-12-28loader: Add accessor for Manual RomFSZach Hilman5-0/+30
2018-12-28hid: Make Hid service accessible and add GetPressStateZach Hilman4-459/+540
2018-12-28romfs: Add SingleDiscard extraction typeZach Hilman2-2/+6
Needed for manual RomFS extraction, as Full generates an extra directory and Truncated generates variable results.
2018-12-28am: Add size parameter to am:IStorage loggingZach Hilman1-4/+4
2018-12-28audio_core: Convert LOG_CRITICAL + UNREACHABLE over to UNIMPLEMENTED/UNIMPLEMENTED_MSGLioncash3-10/+6
These two macros being used in tandem were used prior to the introduction of UNIMPLEMENTED and UNIMPLEMENTED_MSG. This provides equivalent behavior, just with less typing/reading involved.
2018-12-28kernel/process: Start the main thread using the specified ideal coreLioncash1-2/+2
This matches kernel behavior in that processes are started using their specified ideal core, rather than always starting on core 0.
2018-12-28kernel: Rename 'default' CPU core to 'ideal' coreLioncash5-23/+23
This makes the naming more closely match its meaning. It's just a preferred core, not a required default core. This also makes the usages of this term consistent across the thread and process implementations.
2018-12-28kernel/thread: Move process thread initialization into process.cppLioncash3-36/+30
This function isn't a general purpose function that should be exposed to everything, given it's specific to initializing the main thread for a Process instance. Given that, it's a tad bit more sensible to place this within process.cpp, which keeps it visible only to the code that actually needs it.
2018-12-28file_sys/program_metadata: Print out more descriptive address space descriptionsLioncash1-3/+7
Provides extra information that makes it easier to tell if an executable being run is using a 36-bit address space or a 39-bit address space. While we don't support AArch32 executables yet, this also puts in distinguishing information for the 32-bit address space types as well.
2018-12-28Qt/Configure: Use sidebar to divide tabs into smaller groupsspycrab3-59/+124
2018-12-28kernel/process: Remove most allocation functions from Process' interfaceLioncash4-49/+35
In all cases that these functions are needed, the VMManager can just be retrieved and used instead of providing the same functions in Process' interface. This also makes it a little nicer dependency-wise, since it gets rid of cases where the VMManager interface was being used, and then switched over to using the interface for a Process instance. Instead, it makes all accesses uniform and uses the VMManager instance for all necessary tasks. All the basic memory mapping functions did was forward to the Process' VMManager instance anyways.
2018-12-27Add missing uintBitsToFloat to SetRegisterToHalfFloatRodolfo Bogado1-2/+2
2018-12-27am: Implement GetSaveDataSize and ExtendSaveDataZach Hilman6-8/+53
These functions come in a pair and are needed by Smash Ultimate, Minecraft, and Skyrim, amongst others.
2018-12-27filesystem: Populate save data sizes from control dataZach Hilman2-0/+53
2018-12-27savedata_factory: Partially implement IVFC save sizes using filesZach Hilman2-0/+38
This stores a file in the save directory called '.yuzu_save_size' which stores the two save sizes (normal area and journaled area) sequentially as u64s.
2018-12-27loader: Add accessor for game control dataZach Hilman5-9/+14
2018-12-27control_metadata: Update NACP fields with latest Switchbrew dataZach Hilman2-6/+29
2018-12-27control_metadata: Use value member instead of unique_ptr to store structZach Hilman2-10/+13
Serves no actual purpose in this instance besides making NACP's copy assignment deleted, which is not intended behavior.
2018-12-27vfs: Add reinterpret_casts to WriteArray and ObjectZach Hilman1-2/+2
Allows these functions to compile when T is not u8.
2018-12-27kernel/vm_manager: Reset region attributes when unmapping a VMALioncash1-0/+1
Like the other members related to memory regions, the attributes need to be reset back to their defaults as well.
2018-12-26configure_per_general: Mark UI strings as translatable in the constructorLioncash1-2/+2
These are user-facing strings, so they should be translatable.
2018-12-26configure_input_simple: Make input profile array constexprLioncash1-12/+7
Calling tr() from a file-scope array isn't advisable, since it can be executed before the Qt libraries are even fully initialized, which can lead to crashes. Instead, the translatable strings should be annotated, and the tr() function should be called at the string's usage site.
2018-12-26renderer_opengl: Correct forward declaration of FramebufferLayoutLioncash1-1/+1
This is actually a struct, not a class, which can lead to compilation warnings.
2018-12-26Apply CC test to the final value to be stored in the registerRodolfo Bogado1-9/+12
2018-12-26Fixed shader linking error due to TLDS (#1934)David1-1/+1
* Fixed shader linking error due to TLDS coord should be coords * Fix remaining coords
2018-12-26npad: Remove code to invert input in horizontal mode.bunnei1-46/+0
- This was incorrect, the game appears to handle this for us. - Fixes horizontal mode with Puyo Puyo Tetris and Super Mario Odyssey.
2018-12-26shader_bytecode: Fixup TEXS.F16 encodingReinUsesLisp1-1/+1
2018-12-25qt: Use ProfileSelectionDialog when selecting user for save dataZach Hilman1-22/+16
This allows us to present a much nicer UI to the user over a simple combo box and is made easy with the modular nature of the profile-selection applet frontend.
2018-12-25qt: Add setting to prompt for user on game bootZach Hilman6-0/+32
Using the QtProfileSelectorDialog, this implementation is trivial. This mimics the real switch behavior of asking which user on every game boot, but it is default disabled as that might get inconvenient.
2018-12-22Includde saturation in the evaluation of the control codeRodolfo Bogado1-3/+4
2018-12-22Handle RZ cases evaluating the expression instead of the register value.Rodolfo Bogado1-14/+22
2018-12-22complete emulation of ZeroFlagRodolfo Bogado1-100/+97
2018-12-21common/quaternion: Ensure that w is always initializedLioncash1-1/+1
Previously xyz was always being zero initialized due to its constructor, but w wasn't. Ensures that we always have a deterministic initial state.
2018-12-21hid: Fix SetNpadJoyHoldType and improve logging.bunnei1-44/+163
2018-12-21kernel/process: Hook up the process capability parser to the process itselfLioncash7-122/+44
While we're at it, we can also toss out the leftover capability parsing from Citra.
2018-12-21kernel/process_capability: Handle debug capability flagsLioncash2-1/+18
2018-12-21kernel/process_capability: Handle handle table capability flagsLioncash2-1/+11
This just specifies the handle table size. There's also a section of reserved bits that are checked against.
2018-12-21kernel/process_capability: Handle kernel version capability flagsLioncash2-1/+18
2018-12-21kernel/process_capability: Handle program capability flagsLioncash3-2/+29
2018-12-21kernel/process_capability: Handle interrupt capability flagsLioncash1-1/+21
Similar to the service capability flags, however, we currently don't emulate the GIC, so this currently handles all interrupts as being valid for the time being.
2018-12-21kernel/process_capability: Handle syscall capability flagsLioncash2-1/+29
2018-12-21kernel/process_capability: Handle the priority mask and core mask flagsLioncash2-1/+40
Handles the priority mask and core mask flags to allow building up the masks to determine the usable thread priorities and cores for a kernel process instance.
2018-12-21kernel/process: Introduce process capability parsing skeletonLioncash5-3/+468
We've had the old kernel capability parser from Citra, however, this is unused code and doesn't actually map to how the kernel on the Switch does it. This introduces the basic functional skeleton for parsing process capabilities.
2018-12-21common: Add basic bit manipulation utility function to CommonLioncash2-0/+62
2018-12-19kernel/svc: Handle thread handles within GetProcessIdLioncash1-10/+23
If a thread handle is passed to svcGetProcessId, the kernel attempts to access the process ID via the thread's instance's owning process. Technically, this function should also be handling the kernel debug objects as well, however we currently don't handle those kernel objects yet, so I've left a note via a comment about it to remind myself when implementing it in the future.
2018-12-19svc: Implement svcSetMemoryAttributeLioncash1-5/+46
With all the basic backing functionality implemented, we can now unstub svcSetMemoryAttribute.
2018-12-19vm_manager: Add member function for setting memory attributes across an address rangeLioncash2-0/+41
This puts the backing functionality for svcSetMemoryAttribute in place, which will be utilized in a following change.
2018-12-19vm_manager: Add member function for checking a memory range adheres to certain attributes, permissions and statesLioncash2-0/+100
2018-12-19kernel/kernel: Use correct initial PID for userland Process instancesLioncash2-4/+14
Starts the process ID counter off at 81, which is what the kernel itself checks against internally when creating processes. It's actually supposed to panic if the PID is less than 81 for a userland process.
2018-12-19kernel/svc: Correct output parameter for svcGetThreadIdLioncash1-1/+1
The service call uses a 64-bit value, just like svcGetProcessId. This amends the function signature accordingly.
2018-12-19kernel/thread: Make thread_id a 64-bit valueLioncash4-7/+7
The kernel uses a 64-bit value for the thread ID, so we shouldn't be using a 32-bit value.
2018-12-19kernel/svc: Correct output parameter for svcGetProcessIdLioncash2-2/+10
svcGetProcessId's out parameter is a pointer to a 64-bit value, not a 32-bit one.
2018-12-19kernel/process: Make process_id a 64-bit valueLioncash3-6/+6
In the actual kernel, this is a 64-bit value, so we shouldn't be using a 32-bit type to handle it.
2018-12-19Device handle should not be a random id, instead it's the current npad idDavid Marcec1-2/+2
Found during hardware testing
2018-12-19Moved backtrace to ArmInterfaceDavid Marcec8-47/+20
2018-12-19hopefully fix clang format issueDavid Marcec1-0/+1
2018-12-19Fixed uninitialized memory due to missing returns in canaryDavid Marcec14-3/+33
Functions which are suppose to crash on non canary builds usually don't return anything which lead to uninitialized memory being used.
2018-12-19service/sm: Improve debug log for RegisterServiceLioncash1-4/+5
Now it also indicates the name and max session count. This also gives a name to the unknown bool. This indicates if the created port is supposed to be using light handles or regular handles internally. This is passed to the respective svcCreatePort parameter internally.
2018-12-18yuzu, video_core: Screenshot functionalityzhupengfei15-43/+228
Allows capturing screenshot at the current internal resolution (native for software renderer), but a setting is available to capture it in other resolutions. The screenshot is saved to a single PNG in the current layout.
2018-12-18Texture format fixes: Flag RGBA16UI as GL_RGBA_INTEGER format, and interpret R16U as Z16 when depth_compare is enabled.heapo1-1/+11
2018-12-18kernel/thread: Set default fpcrMerryMage1-0/+3
2018-12-18arm_dynarmic: Set CNTFRQ valueMerryMage1-0/+1
2018-12-18shader_bytecode: Fixup half float's operator B encodingReinUsesLisp1-1/+1
2018-12-18service/am: Unstub GetAppletResourceUserIdLioncash1-2/+5
This is supposed to return the current process' ID. (0 indicates an invalid ID for both process IDs and ARU IDs).
2018-12-17Implement postfactor multiplication/division for fmul instructionsheapo2-5/+21
2018-12-17Fix arrayed shadow sampler array slice/depth comparison ordering, as well as invalid GLSL LOD selection.heapo1-16/+14
2018-12-16vm_manager: Rename meminfo_state to stateLioncash2-10/+9
This is shorter and more concise. This also removes the now-innaccurate comment, as it's not returned wholesale to svcQueryMemory anymore.
2018-12-16vm_manager: Add backing functionality for memory attributesLioncash2-1/+85
Adds the barebones enumeration constants and functions in place to handle memory attributes, while also essentially leaving the attribute itself non-functional.
2018-12-15nvhost_gpu: Skip empty GPU command lists.bunnei1-0/+4
2018-12-13audio_core: Make g_sink_details internally linkedLioncash7-36/+58
We can hide the direct array from external view and instead provide functions to retrieve the necessary info. This has the benefit of completely hiding the makeup of the SinkDetails structure from the rest of the code. Given that this makes the array hidden, we can also make the array constexpr by altering the members slightly. This gets rid of several static constructor calls related to std::vector and std::function. Now we don't have heap allocations here that need to occur before the program can even enter main(). It also has the benefit of saving a little bit of heap space, but this doesn't matter too much, since the savings in that regard are pretty tiny.
2018-12-13Fix Service object leak on emulation stopJens Schmer2-10/+12
Services created with the ServiceFramework base class install themselves as HleHandlers with an owning shared_ptr in the ServerPort ServiceFrameworkBase::port member variable, creating a cyclic ownership between ServiceFrameworkBase and the ServerPort, preventing deletion of the service objects. Fix that by removing the ServiceFrameworkBase::port member because that was only used to detect multiple attempts at installing a port. Instead store a flag if the port was already installed to achieve the same functionality.
2018-12-12svc: Enable svcQueryProcessMemoryLioncash2-1/+6
svcQueryProcessMemory is trivial to implement, given all the behavior necessary for it is present, it just needs a handler for it.
2018-12-12svc: Write out the complete MemoryInfo structure in QueryProcessMemoryLioncash1-0/+3
In the previous change, the memory writing was moved into the service function itself, however it still had a problem, in that the entire MemoryInfo structure wasn't being written out, only the first 32 bytes of it were being written out. We still need to write out the trailing two reference count members and zero out the padding bits. Not doing this can result in wrong behavior in userland code in the following scenario: MemoryInfo info; // Put on the stack, not quaranteed to be zeroed out. svcQueryMemory(&info, ...); if (info.device_refcount == ...) // Whoops, uninitialized read. This can also cause the wrong thing to happen if the user code uses std::memcmp to compare the struct, with another one (questionable, but allowed), as the padding bits are not guaranteed to be a deterministic value. Note that the kernel itself also fully zeroes out the structure before writing it out including the padding bits.
2018-12-12svc: Handle memory writing explicitly within QueryProcessMemoryLioncash2-26/+22
Moves the memory writes directly into QueryProcessMemory instead of letting the wrapper function do it. It would be inaccurate to allow the handler to do it because there's cases where memory shouldn't even be written to. For example, if the given process handle is invalid. HOWEVER, if the memory writing is within the wrapper, then we have no control over if these memory writes occur, meaning in an error case, 68 bytes of memory randomly get trashed with zeroes, 64 of those being written to wherever the memory info address points to, and the remaining 4 being written wherever the page info address points to. One solution in this case would be to just conditionally check within the handler itself, but this is kind of smelly, given the handler shouldn't be performing conditional behavior itself, it's a behavior of the managed function. In other words, if you remove the handler from the equation entirely, does the function still retain its proper behavior? In this case, no. Now, we don't potentially trash memory from this function if an invalid query is performed.
2018-12-12vm_manager: Correct ordering of last two struct members of MemoryInfoLioncash1-2/+2
These should be swapped.
2018-12-12svc_wrap: Correct register index for a wrapper specializationLioncash1-1/+1
This would result in svcSetMemoryAttribute getting the wrong value for its third parameter. This is currently fine, given the service function is stubbed, however this will be unstubbed in a future change, so this needs to change.
2018-12-12vm_manager: Amend the returned values for invalid memory queries in QueryMemory()Lioncash2-4/+7
The kernel returns a memory info instance with the base address set to the end of the address space, and the size of said block as 0 - address_space_end, it doesn't set both of said members to zero.
2018-12-12vm_manager: Migrate memory querying to the VMManager interfaceLioncash4-18/+33
Gets rid of the need to directly access the managed VMAs outside of the memory manager itself just for querying memory.
2018-12-12vm_manager: Migrate MemoryInfo and PageInfo to vm_manager.hLioncash3-17/+16
Gets the two structures out of an unrelated header and places them with the rest of the memory management code. This also corrects the structures. PageInfo appears to only contain a 32-bit flags member, and the extra padding word in MemoryInfo isn't necessary.
2018-12-12vm_manager: Amend MemoryState enum membersLioncash5-28/+111
Amends the MemoryState enum to use the same values like the actual kernel does. Also provides the necessary operators to operate on them. This will be necessary in the future for implementing svcSetMemoryAttribute, as memory block state is checked before applying the attribute.
2018-12-12Fix Process object leak on emulation stopJens Schmer3-13/+12
The Process object kept itself alive indefinitely because its handle_table contains a SharedMemory object which owns a reference to the same Process object, creating a circular ownership scenario. Break that up by storing only a non-owning pointer in the SharedMemory object.
2018-12-11patch_manager: Prevent use of a dangling pointer within PatchRomFSLioncash1-4/+3
fmt::format() returns a std::string instance by value, so calling .c_str() on it here is equivalent to doing: auto* ptr = std::string{}.c_str(); The data being pointed to isn't guaranteed to actually be valid anymore after that expression ends. Instead, we can just take the string as is, and provide the necessary formatting parameters.
2018-12-11gl_shader_cache: Dehardcode constant in CalculateProgramSize()Lioncash1-2/+2
This constant is related to the size of the instruction.
2018-12-11gl_shader_cache: Resolve truncation compiler warningLioncash1-1/+1
The previous code would cause a warning, as it was truncating size_t (64-bit) to a u32 (32-bit) implicitly.
2018-12-10fsp_srv: Implement IStorage::GetSizeZach Hilman1-2/+15
Takes no input and returns the size as a u64. Needed by Katamari Damacy Reroll to boot.
2018-12-10gl_shader_decompiler: IPA FrontFacing: the right value when is the front face is 0xFFFFFFFF.Marcos Vitali1-1/+1
2018-12-10service/fsp_srv: Correct returned value in GetGlobalAccessLogMode()Lioncash1-1/+10
Based off RE, the backing code only ever seems to use 0-2 as the range of values 1 being a generic log enable, with 2 indicating logging should go to the SD card. These are used as a set of flags internally. Given we only care about receiving the log in general, we can just always signify that we want logging in general.
2018-12-10applets: Correct usage of SignalStateChanged eventZach Hilman3-6/+4
This was causing some games (most notably Pokemon Quest) to softlock due to an event being fired when not supposed to. This also removes a hack wherein we were firing the state changed event when the game retrieves it, which is incorrect.
2018-12-09Implemented a shader unique identifier.Fernando Sahmkow4-0/+57
2018-12-09Add more info into textures' object labelsFernandoS272-2/+57
2018-12-08 web_service: move telemetry condition from TelemetrySession constructor to destructorfearlessTobi1-8/+4
Fixes an issue where Testcases couldn't be sent when Telemetry was disabled, because both things are tied closely together in the backend.
2018-12-08file_sys/save_data_factory: Update SaveDataSpaceId enumLioncash1-1/+3
Amends it with missing values deduced from RE (ProperSystem being from SwitchBrew for naming) (SdCardUser wasn't that difficult to discern given it's used alongside SdCardSystem when creating the save data indexer, based off the usage of the string "saveDataIxrDbSd" nearby).
2018-12-07gl_shader_decompiler: TLDS/TLD4/TLD4S Reworked reflecting the source registers, bugs fixed and modularize.Marcos Vitali1-106/+134
2018-12-07Backport review comment from citra-emu/citra#4418Tobias1-2/+2
Original reason: As Windows multi-byte character codec is unspecified while we always assume std::string uses UTF-8 in our code base, this can output gibberish when the string contains non-ASCII characters. ::OutputDebugStringW combined with Common::UTF8ToUTF16W is preferred here.
2018-12-07savedata_factory: Add support for CacheStorageZach Hilman1-0/+2
2018-12-07savedata_factory: Delete TemporaryStorage on startupZach Hilman1-1/+5
Mimics hardware behavior.
2018-12-06memory: Convert ASSERT into a DEBUG_ASSERT within GetPointerFromVMA()Lioncash1-1/+1
Given memory should always be expected to be valid during normal execution, this should be a debug assertion, rather than a check in regular builds.
2018-12-06vm_manager: Make vma_map privateLioncash5-28/+41
This was only ever public so that code could check whether or not a handle was valid or not. Instead of exposing the object directly and allowing external code to potentially mess with the map contents, we just provide a member function that allows checking whether or not a handle is valid. This makes all member variables of the VMManager class private except for the page table.
2018-12-06Avoid (expensive) audio interpolation when sample rates already matchheapo2-4/+8
2018-12-06system_archive: Implement open source NgWord2Zach Hilman3-1/+41
2018-12-06hle/service: Replace log + UNIMPLEMENTED with UNIMPLEMENTED_MSGLioncash1-2/+1
Combines the two into one, shortening the amount of code here.
2018-12-06hle/service: Remove unnecessary using declarationsLioncash1-5/+1
Only one usage of the specified objects made use of the lack of namespacing. Given the low usage, we can just remove these.
2018-12-06hle/service, hle/sm: Compress usages of MakeResult()Lioncash2-3/+3
These auto-deduce the result based off its arguments, so there's no need to do that work for the compiler, plus, the function return value itself already indicates what we're returning.
2018-12-06hle/service, hle/sm: Use structured bindings where applicableLioncash2-9/+3
Gets rid of the need to keep the variables separate from their actual initialization spots.
2018-12-06yuzu/wait_tree: Pass QString by value and std::move in the initializer list for WaitTreeTextLioncash2-2/+2
Just a trivial modernization that potentially avoids copying strings in certain scenarios.
2018-12-05yuzu/game_list_worker: Don't retrieve the file type twice in AddFstEntriesToGameList()Lioncash1-5/+9
Similarly, here we can avoid doing unnecessary work twice by retrieving the file type only once and comparing it against relevant operands, avoiding potential unnecessary object construction/destruction.
2018-12-05yuzu/game_list_worker: Don't retrieve file type and file type strings twice in MakeGameListEntry()Lioncash1-4/+6
While GetFileType() is indeed a getter function, that doesn't mean it's a trivial function, given some case require reading from the data or constructing other objects in the background. Instead, only do necessary work once.
2018-12-05loaders: Make GetFileType() a const qualified member functionLioncash10-10/+10
No implementations actually modify instance state (and it would be questionable to do that in the first place given the name), so we can make this a const member function.
2018-12-05Call shrink_to_fit after page-table vector resizing to cause crt to actually lower vector capacity. For 36-bit titles saves 800MB of commit.heapo1-0/+8
2018-12-05kernel/process: Set ideal core from metadataLioncash1-0/+1
A very trivial change. If metadata is available, the process should use it to retrieve the desired core for the process to run on.
2018-12-05configure_input_simple: Properly signal docked mode changeZach Hilman3-33/+31
2018-12-05configure_input: Add ConfigureInputSimple as default input UI configZach Hilman8-1/+293
Greatly simplifies the current input UI, while still allowing power users to tweak advanced settings. Adds 'input profiles', which are easy autoconfigurations to make getting started easy and fast. Also has a custom option which brings up the current, full UI.
2018-12-05configure_input: Convert into QDialogZach Hilman3-7/+47
2018-12-05configure: Use ConfigureInputSimple for Input tabZach Hilman1-26/+26
2018-12-05ui_settings: Add UI setting for input profile indexZach Hilman2-0/+5
2018-12-05configuration/config: Use an intermediary variable for accessing playersLioncash1-43/+38
Avoids typing the same long accessor just to retrieve player attributes.
2018-12-05ng_word: Deduplicate use of a constant valueLioncash1-1/+1
We've already given the constant to the vector itself, so we don't need to re-hardcode it in the array.
2018-12-05system_archive: Use a regular function pointer instead of std::function for file-scope system archive arrayLioncash1-3/+2
This allows the array to be constexpr. std::function is also allowed to allocate memory, which makes its constructor non-trivial, we definitely don't want to have all of these execute at runtime, taking up time before the application can actually load.
2018-12-05service/ldr: Deduplicate instruction cache clearing code in LoadNro()Lioncash1-8/+2
We don't need to specify all of the ARM interfaces explicitly.
2018-12-05service/ldr: Amend layout of the NRO headerLioncash1-3/+3
The first word is just a padding byte, it's not an actual entry instruction. Also renames the rest of the entries according to SwitchBrew.
2018-12-05gl_shader_decompiler: Implement TEXS.F16ReinUsesLisp2-13/+51
2018-12-05service/ldr: Corrent padding within the NRR header layoutLioncash1-1/+2
The padding after the magic signature value should be 12 bytes rather than 28 bytes. The other 16 should be placed after the title ID pattern.
2018-12-05gl_shader_decompiler: Fixup inverted ifReinUsesLisp1-6/+5
2018-12-05svc: Avoid incorrect fast yield conditionZach Hilman1-6/+1
2018-12-05kernel/svc: Correct behavior of svcResetSignal()Lioncash1-4/+11
While partially correct, this service call allows the retrieved event to be null, as it also uses the same handle to check if it was referring to a Process instance. The previous two changes put the necessary machinery in place to allow for this, so we can simply call those member functions here and be done with it.
2018-12-05kernel/process: Make Process a WaitObjectLioncash3-6/+68
Process instances can be waited upon for state changes. This is also utilized by svcResetSignal, which will be modified in an upcoming change. This simply puts all of the WaitObject related machinery in place.
2018-12-05kernel/readable_event: Add member function for enforcing a strict reset contractLioncash2-1/+22
svcResetSignal relies on the event instance to have already been signaled before attempting to reset it. If this isn't the case, then an error code has to be returned.
2018-12-05Improve msvc codegen for hot-path array LUTsheapo1-275/+277
In some constexpr functions, msvc is building the LUT at runtime (pushing each element onto the stack) out of an abundance of caution. Moving the arrays into be file-scoped constexpr's avoids this and turns the functions into simple look-ups as intended.
2018-12-05yuzu/game_list_worker: Move std::string construction after the termination check in callbacksLioncash1-7/+7
Avoids potentially allocating a std::string instance when it isn't needed.
2018-12-04kernel/svc: Remove unused header inclusionLioncash1-1/+0
2018-12-04kernel/svc: Implement svcSignalEvent()Lioncash1-1/+16
This function simply does a handle table lookup for a writable event instance identified by the given handle value. If a writable event cannot be found for the given handle, then an invalid handle error is returned. If a writable event is found, then it simply signals the event, as one would expect.
2018-12-04kernel/svc: Implement svcCreateEvent()Lioncash2-1/+42
svcCreateEvent operates by creating both a readable and writable event and then attempts to add both to the current process' handle table. If adding either of the events to the handle table fails, then the relevant error from the handle table is returned. If adding the readable event after the writable event to the table fails, then the writable event is removed from the handle table and the relevant error from the handle table is returned. Note that since we do not currently test resource limits, we don't check the resource limit table yet.
2018-12-04qt: Add Properties menu to game list right-clickZach Hilman9-22/+54
2018-12-04Rewrited TEX/TEXS (TEX Scalar). (#1826)Marcos1-259/+177
* Rewrited TEX/TEXS (TEX Scalar). * Style fixes. * Styles issues.
2018-12-04debugger: Set paused thread colorLuke Street1-1/+2
2018-12-04kernel/object: Amend handle types to distinguish between readable and writable eventsLioncash6-11/+20
Two kernel object should absolutely never have the same handle ID type. This can cause incorrect behavior when it comes to retrieving object types from the handle table. In this case it allows converting a WritableEvent into a ReadableEvent and vice-versa, which is undefined behavior, since the object types are not the same. This also corrects ClearEvent() to check both kernel types like the kernel itself does.
2018-12-04kernel/handle_table: Amend reference to CTR-OS in Create()Lioncash1-2/+3
Another hold-over from Citra.
2018-12-04kernel/svc: Implement the resource limit svcGetInfo optionLioncash4-9/+34
Allows a process to register the resource limit as part of its handle table.
2018-12-04svc: Implement SetThreadActivity (thread suspension)Luke Street5-6/+76
2018-12-04Removed unused file.Subv1-142/+0
This is a leftover from #1792
2018-12-04GPU: Don't try to route PFIFO methods (0-0x40) to the other engines.Subv1-0/+6
2018-12-04[Kernel::CreateThread] Match format specifiers to LOG_TRACE's argumentsV.Kalyuzhny1-1/+1
2018-12-04scheduler: Avoid manual Reschedule callZach Hilman2-11/+11
This will automatically occur anyway when PrepareReschedule is called
2018-12-03scheduler: Only work steal higher priority threads from other coresZach Hilman3-35/+24
2018-12-03applets: Correct event ResetTypes from OneShot to StickyZach Hilman5-14/+6
Fixes bugs relating to signalling in software keyboard.
2018-12-03qt: Implement GUI dialog frontend for ProfileSelectorZach Hilman6-0/+269
Presents profiles in a list, similar to switch.
2018-12-03am: Use ProfileSelect appletZach Hilman1-0/+4
2018-12-03applets: Implement ProfileSelect appletZach Hilman2-0/+130
Allows the player to select an emulated profile.
2018-12-03qt: Register to use Qt ProfileSelector instead of defaultZach Hilman1-0/+2
2018-12-03core: Add getter/setter for ProfileSelector in SystemZach Hilman2-0/+16
2018-12-03frontend: Add frontend applet for ProfileSelectZach Hilman3-0/+48
Responsible for selecting a profile and firing callback upon completion.
2018-12-03software_keyboard: Signal state changed event upon constructionZach Hilman1-1/+6
Previously, ILibraryAppletAccessor would signal upon creation of any applet, but this is incorrect. A flag inside of the applet code determines whether or not creation should signal state change and swkbd happens to be one of these applets.
2018-12-03qt: Add UI to display game properties and disable add-onsZach Hilman4-0/+501
2018-12-03loader: Add support for reading the name of game's developerZach Hilman5-0/+26
2018-12-03aoc_u: Obey disabled add-ons list when listing DLCZach Hilman1-0/+12
2018-12-03patch_manager: Obey disabled add-ons list when patching gameZach Hilman2-11/+50
2018-12-03core: Make GetGameFileFromPath function externally accessibleZach Hilman2-3/+9
2018-12-03config: Store and load disabled add-ons listZach Hilman3-0/+55
2018-12-03settings: Store list of disabled add-ons per title IDZach Hilman1-0/+5
2018-12-03game_list: Remove a reference of a referenceFrederic Laing1-2/+2
2018-12-03Moved backtrace to ArmInterfaceDavid Marcec6-14/+39
Added to both dynarmic and unicorn
2018-12-03Print backtrace on svcBreakDavid Marcec3-0/+24
When we get an svcBreak we get a backtrace now
2018-12-03loader/nso: Remove dependency on the System classLioncash3-8/+11
Similar to the NRO changes, we can also pass the process explicitly as a parameter from Load instead of indirecting through the System class.
2018-12-03loader/nro: Make the static LoadNro function internally linkedLioncash2-7/+5
This simply acts as a forwarding function for the Load() function, so this doesn't need to be directly exposed.
2018-12-03file_sys/directory: Amend path buffer size for directory entriesLioncash1-2/+2
The path buffer is actually 0x301 (769) characters in length, with the extra character being intended for the null-terminator.
2018-12-03loader/nro: Remove dependency on the System classLioncash2-10/+13
Load() is already given the process instance as a parameter, so instead of coupling the class to the System class, we can just forward that parameter to LoadNro()
2018-12-02service/usb: Update function tableLioncash1-1/+1
Updates the function table for IClientEpSession based off information provided by SwitchBrew.
2018-12-02service/erpt: Update function tableLioncash1-5/+7
Updates the function table according to information provided by SwitchBrew.
2018-12-02yuzu/configuration: Make slots private where applicableLioncash5-7/+2
These slots are only ever attached to event handling mechanisms within the class itself, they're never used externally. Because of this, we can make the functions private. This also removes redundant usages of the private access specifier.
2018-12-02yuzu/configuration: Add missing override specifiers to configuration-related classesLioncash7-7/+7
Resolves trivial compiler warnings.
2018-12-02yuzu/configuration/configure_input: Default destructor in the cpp fileLioncash2-0/+3
The previous code could potentially be a compilation issue waiting to occur, given we forward declare the type for a std::unique_ptr. If the complete definition of the forward declared type isn't visible in a translation unit that the class is used in, then it would fail to compile. Defaulting the destructor in a cpp file ensures the std::unique_ptr's destructor is only invoked where its complete type is known.
2018-12-02Fixed crash with SetNpadModeDavid Marcec1-2/+3
fixed crash due to handheld
2018-12-02svc: Use the current process' handle table for retrieving the process instance to act uponLioncash1-1/+2
The kernel uses the handle table of the current process to retrieve the process that should be used to retrieve certain information. To someone not familiar with the kernel, this might raise the question of "Ok, sounds nice, but doesn't this make it impossible to retrieve information about the current process?". No, it doesn't, because HandleTable instances in the kernel have the notion of a "pseudo-handle", where certain values allow the kernel to lookup objects outside of a given handle table. Currently, there's only a pseudo-handle for the current process (0xFFFF8001) and a pseudo-handle for the current thread (0xFFFF8000), so to retrieve the current process, one would just pass 0xFFFF8001 into svcGetInfo. The lookup itself in the handle table would be something like: template <typename T> T* Lookup(Handle handle) { if (handle == PSEUDO_HANDLE_CURRENT_PROCESS) { return CurrentProcess(); } if (handle == PSUEDO_HANDLE_CURRENT_THREAD) { return CurrentThread(); } return static_cast<T*>(&objects[handle]); } which, as is shown, allows accessing the current process or current thread, even if those two objects aren't actually within the HandleTable instance.
2018-12-02svc: Reorganize svcGetInfo, handle more error cases for existing implemented info categoriesLioncash1-50/+99
Our implementation of svcGetInfo was slightly incorrect in that we weren't doing proper error checking everywhere. Instead, reorganize it to be similar to how the kernel seems to do it.
2018-12-02svc: Avoid performance-degrading unnecessary rescheduleZach Hilman2-8/+6
2018-12-02service/audio/audout_u: Amend constructor initialization list orderLioncash1-2/+2
Orders the constructor initializer list the same way the members of the class are declared. Prevents -Wreorder warnings
2018-12-02file_sys/registered_cache: Eliminate variable shadowingLioncash1-27/+26
Also inverts if statements where applicable to allow unindenting code a little bit.
2018-12-02filesystem: De-globalize registered_cache_unionLioncash8-40/+26
We can just return a new instance of this when it's requested. This only ever holds pointers to the existing registed caches, so it's not a large object. Plus, this also gets rid of the need to keep around a separate member function just to properly clear out the union. Gets rid of one of five globals in the filesystem code.
2018-12-02yuzu/game_list_worker: Deduplicate game list entry creationLioncash1-47/+33
Avoids duplicating the same code twice verbatim.
2018-12-02yuzu/game_list_worker: Tidy up string handling in FillControlMap()Lioncash1-6/+7
We don't need to call out to our own file handling functions when we're going to construct a QFileInfo instance right after it. We also don't need to convert to a std::string again just to compare the file extension.
2018-12-02crypto/key_manager: Remove unused variable in GetTicketblob()Lioncash1-1/+0
2018-12-01Fix debug buildLioncash2-5/+3
A non-existent parameter was left in some formatting calls (the logging macro for which only does anything meaningful on debug builds)
2018-12-01file_sys: Override missing mutating functions to be stubbed out for ReadOnlyVfsDirectory by defaultLioncash2-0/+25
Ensures that read only indeed means read only.
2018-12-01service/fsp_srv: Implement CleanDirectoryRecursivelyLioncash5-5/+72
This is the same behavior-wise as DeleteDirectoryRecursively, with the only difference being that it doesn't delete the top level directory in the hierarchy, so given: root_dir/ - some_dir/ - File.txt - OtherFile.txt The end result is just: root_dir/
2018-11-30remove border from GameListBartosz Kaszubowski1-0/+1
2018-11-30Services/VI: Dereferencing an uninitialized std::optional is undefined behavior.Subv1-0/+2
Assert that it is not empty before using it in the DequeueBuffer wait callback.
2018-11-30service/set: Convert GetLanguageCode over to using PushEnum()Lioncash1-1/+1
This code was around prior to the introduction of PushEnum, so convert it over so we don't need to cast here.
2018-11-30service/set: Implement MakeLanguageCodeLioncash2-1/+19
This function simply converts a given index into a language code.
2018-11-30configure_input: Amend clang-format discrepanciesLioncash1-1/+1
2018-11-30gl_rasterizer_cache: Update AccurateCopySurface to flush complete source surface.bunnei1-1/+4
- Fixes issues with Breath of the Wild with use_accurate_gpu_emulation setting.
2018-11-29gl_rasterizer: Enable clip distances when set in register and in shaderReinUsesLisp5-13/+37
2018-11-29gl_rasterizer: Implement a framebuffer cacheReinUsesLisp2-40/+82
2018-11-29gl_shader_manager: Update pipeline when programs have changedReinUsesLisp1-4/+17
2018-11-29hle_ipc: Refactor SleepClientThread to avoid ReadableEventZach Hilman9-14/+14
2018-11-29kernel/event: Reference ReadableEvent from WritableEventZach Hilman32-317/+175
2018-11-29core: Port all current usages of Event to Readable/WritableEventZach Hilman29-164/+287
2018-11-29hle_ipc: Use event pair for SleepClientThreadZach Hilman2-19/+22
2018-11-29kernel: Add named event tableZach Hilman2-0/+30
Used to store ReadableEvents of all events on the system.
2018-11-29kernel: Divide Event into ReadableEvent and WritableEventZach Hilman6-61/+210
More hardware accurate. On the actual system, there is a differentiation between the signaler and signalee, they form a client/server relationship much like ServerPort and ClientPort.
2018-11-29kernel/object: Add descriptions to ResetTypesZach Hilman1-3/+3
2018-11-29gl_rasterizer_cache: Remove BlitSurface and replace with more accurate copy.bunnei1-144/+1
- BlitSurface with different texture targets is inherently broken. - When target is the same, we can just use FastCopySurface. - Fixes rendering issues with Breath of the Wild.
2018-11-29gl_shader_decompiler: Remove texture temporal in TLD4ReinUsesLisp1-3/+1
2018-11-29gl_shader_decompiler: Flip negated if else statementReinUsesLisp1-3/+3
2018-11-29gl_shader_decompiler: Use GLSL scope on instructions unrelated to texturesReinUsesLisp1-35/+10
2018-11-29gl_shader_decompiler: Move texture code generation into lambdasReinUsesLisp1-97/+78
2018-11-29gl_shader_decompiler: Clean up texture instructionsReinUsesLisp1-87/+56
2018-11-29gl_shader_decompiler: Scope GLSL variables with a scoped objectReinUsesLisp1-32/+72
2018-11-29gl_rasterizer: Signal UNIMPLEMENTED when rt_separate_frag_data is not zeroReinUsesLisp1-1/+1
2018-11-29gl_rasterizer_cache: Use brackets for two-line single-expresion blocksReinUsesLisp1-1/+2
2018-11-29gl_rasterizer: Remove unused struct declarationsReinUsesLisp1-14/+0
2018-11-29gl_rasterizer: Remove extension booleansReinUsesLisp4-16/+4
2018-11-28npad: Use NPadIdToIndex to prevent invalid array accessZach Hilman1-2/+2
2018-11-28dma_pushbuffer: Optimize to avoid loop and copy on Push.bunnei3-13/+23
2018-11-28gpu: Move command list profiling to DmaPusher::DispatchCalls.bunnei2-5/+5
2018-11-27npad: Fix copy/paste error with LED position assignmentsZach Hilman1-3/+3
2018-11-27yuzu/configure_input_player: Use std::size_t to represent the player index instead of u8Lioncash2-3/+3
Prevents compiler warnings related to truncation when invoking the dialog. It's also extremely suspect to use a u8 value here instead of a more general type to begin with.
2018-11-27yuzu/configure_input: Make CallConfigureDialog a non-member template functionLioncash3-21/+20
This doesn't depend on any part of the private interface, so it can be made a non-member internal function.
2018-11-27file_sys/registered_cache: Remove unused <map> includeLioncash1-1/+0
2018-11-27file_sys/registered_cache: Use regular const references instead of std::shared_ptr for InstallEntry()Lioncash3-32/+31
These parameters don't need to utilize a shared lifecycle directly in the interface. Instead, the caller should provide a regular reference for the function to use. This also allows the type system to flag attempts to pass nullptr and makes it more generic, since it can now be used in contexts where a shared_ptr isn't being used (in other words, we don't constrain the usage of the interface to a particular mode of memory management).
2018-11-27gl_shader_decompiler: Fixup clip distance indexReinUsesLisp1-1/+1
2018-11-27control_metadata: Correct typo in language name (Portugese -> Portuguese)Lioncash1-7/+17
While we're at it, organize the array linearly, since clang formats the array elements quite wide length-wise with the addition of the missing 'u'. Technically also fixes patch lookup and icon lookup with Portuguese, though I doubt anyone has actually run into this issue.
2018-11-27yuzu/configure_input_player: Use a lambda expression instead of std::bindLioncash1-1/+1
std::bind is the pre-C++11 way of doing this.
2018-11-27yuzu/configure_input_player: Amend constructor initializer list orderLioncash1-4/+3
Orders the elements the way they would actually be initialized in. Resolves compiler warnings with gcc and clang
2018-11-27yuzu/configure_input: Remove unused function MoveGridElementLioncash1-7/+0
2018-11-27yuzu/configure_input*: Move data members after function declarationsLioncash2-41/+42
The common pattern is to put the data members after the function interface where applicable.
2018-11-27yuzu/configure_input: Remove unnecessary includesLioncash3-17/+3
2018-11-27gl_rasterizer: Fixup for #1723.Markus Wick1-1/+1
On invalidating the streaming buffer, we need to reupload all vertex buffers. But we don't need to reconfigure the vertex format. This was a (silly) misstake in #1723. Thanks at Rodrigo for discovering the issue. Fun fact, as configuring the vertex format also invalidate the vertex buffer, this misstake had no affect on the behavior.
2018-11-27gpu: Rewrite GPU command list processing with DmaPusher class.bunnei18-108/+353
- More accurate impl., fixes Undertale (among other games).
2018-11-27remove viewport_transform_enabled as it seems to be inactive when valid transforms are used.Rodolfo Bogado1-12/+5
2018-11-27svc: Implement svcSetResourceLimitLimitValue()Lioncash1-1/+36
The opposite of the getter functions, this function sets the limit value for a particular ResourceLimit resource category, with the restriction that the new limit value must be equal to or greater than the current resource value. If this is violated, then ERR_INVALID_STATE is returned. e.g. Assume: current[Events] = 10; limit[Events] = 20; a call to this service function lowering the limit value to 10 would be fine, however, attempting to lower it to 9 in this case would cause an invalid state error.
2018-11-27svc: Implement svcGetResourceLimitCurrentValue()Lioncash1-16/+49
This kernel service function is essentially the exact same as svcGetResourceLimitLimitValue(), with the only difference being that it retrieves the current value for a given resource category using the provided resource limit handle, rather than retrieving the limiting value of that resource limit instance. Given these are exactly the same and only differ on returned values, we can extract the existing code for svcGetResourceLimitLimitValue() to handle both values.
2018-11-27morton: Fixup compiler warningReinUsesLisp1-1/+2
2018-11-27svc: Implement svcGetResourceLimitLimitValue()Lioncash2-2/+33
This kernel service function retrieves the maximum allowable value for a provided resource category for a given resource limit instance. Given we already have the functionality added to the resource limit instance itself, it's sufficient to just hook it up. The error scenarios for this are: 1. If an invalid resource category type is provided, then ERR_INVALID_ENUM is returned. 2. If an invalid handle is provided, then ERR_INVALID_HANDLE is returned (bad thing goes in, bad thing goes out, as one would expect). If neither of the above error cases occur, then the out parameter is provided with the maximum limit value for the given category and success is returned.
2018-11-27svc: Implement svcCreateResourceLimit()Lioncash2-1/+27
This function simply creates a ResourceLimit instance and attempts to create a handle for it within the current process' handle table. If the kernal fails to either create the ResourceLimit instance or create a handle for the ResourceLimit instance, it returns a failure code (OUT_OF_RESOURCE, and HANDLE_TABLE_FULL respectively). Finally, it exits by providing the output parameter with the handle value for the ResourceLimit instance and returning that it was successful. Note: We do not return OUT_OF_RESOURCE because, if yuzu runs out of available memory, then new will currently throw. We *could* allocate the kernel instance with std::nothrow, however this would be inconsistent with how all other kernel objects are currently allocated.
2018-11-27Added comment on Main memory size for more clarityDavid Marcec1-0/+1
2018-11-27Made svcSetHeapSize and svcCreateSharedMemory more readableDavid Marcec1-4/+4
2018-11-27Reworked svcs slightly, improved error messages in AM and fsp_srvDavid Marcec3-20/+30
2018-11-27gdbstub: Silence value truncation warning within FpuWrite()Lioncash1-1/+1
Previously this would cause an implicit truncation warning about assigning a u64 value to a u32 value without an explicit cast.
2018-11-27Implement depth clampRodolfo Bogado5-10/+58
2018-11-27Add support for Clip Distance enabled registerRodolfo Bogado3-3/+26
2018-11-27GPU States: Implement Polygon Offset. This is used in SMO all the time. (#1784)Marcos5-5/+107
* GPU States: Implement Polygon Offset. This is used in SMO all the time. * Clang Format fixes. * Initialize polygon_offset in the constructor.
2018-11-26profile_manager: Save and load ProfileData from diskZach Hilman3-17/+19
The ProfileData is a 0x80-sized structure that stores various pieces of miscellaneous data for the account.
2018-11-26Implemented Tile Width SpacingFernandoS278-36/+55
2018-11-26Fixed hwopus compile errorDavid Marcec1-1/+1
2018-11-26Improved error messages in AM, HwOpus and NvMapDavid Marcec3-26/+39
2018-11-26Improved error messages for SVCsDavid Marcec1-76/+170
2018-11-26Changed logging to be "Log before execution", Added more error logging, all services should now log on some levelDavid Marcec51-374/+726
2018-11-25svc: Return ERR_INVALID_ENUM_VALUE from svcGetInfoLuke Street1-1/+2
2018-11-25Limit the amount of viewports tested for state changes only to the usable onesRodolfo Bogado1-2/+10
2018-11-25gl_shader_decompiler: Implement S2R's Y_DIRECTIONReinUsesLisp5-16/+26
2018-11-25morton: Style changesReinUsesLisp1-12/+12
2018-11-25video_core: Move morton functions to their own fileReinUsesLisp6-345/+391
2018-11-24Fix Texture OverlappingFernandoS271-43/+70
2018-11-24Implemented BRA CC conditional and FSET CC SettingFernandoS271-4/+14
2018-11-24Add support for viewport_transfom_enable registerRodolfo Bogado2-6/+22
2018-11-24service/sm: Take std::string by const reference in UnregisterServiceLioncash2-2/+2
Avoids the need to create a copy of the std::string instance (potentially allocating). The only reason RegisterService takes its argument by value is because it's std::moved internally.
2018-11-24nvdrv: Implement/stub DumpGraphicsMemoryInfo and GetStatus.bunnei2-2/+18
- Used by Undertale.
2018-11-24Add support for clear_flags registerRodolfo Bogado5-28/+95
2018-11-24Fix TEXS Instruction encodingsFernandoS271-22/+48
2018-11-24Fix one encoding in TEX InstructionFernandoS271-3/+3
2018-11-24Corrected inputs indexing in TEX instructionFernandoS271-66/+85
2018-11-23memory_manager: Do not allow 0 to be a valid GPUVAddr.bunnei2-1/+9
- Fixes a bug with Undertale using 0 for a render target.
2018-11-23Added predicate comparison LessEqualWithNan (#1736)Hexagon122-5/+13
* Added predicate comparison LessEqualWithNan * oops * Clang fix
2018-11-23gl_shader_decompiler: Implement clip distancesReinUsesLisp3-21/+58
2018-11-23file_sys: Implement system archive synthesizer for NgWord (806)Zach Hilman5-6/+61
2018-11-22am: Return StubApplet instead of nullptr when AppletId not foundZach Hilman3-11/+11
2018-11-22gl_shader_decompiler: Add a message for unimplemented cc generationReinUsesLisp1-23/+46
2018-11-22correct clang-formatgreggameplayer1-1/+1
2018-11-22debug_pad: Avoid loading input for nonexistent buttons (Home and Screenshot)Zach Hilman1-2/+3
Prevents memory exceptions when the debug pad is enabled.
2018-11-22core: Relocate CPU core management to its own classLioncash4-97/+225
Keeps the CPU-specific behavior from being spread throughout the main System class. This will also act as the home to contain member functions that perform operations on all cores. The reason for this being that the following pattern is sort of prevalent throughout sections of the codebase: If clearing the instruction cache for all 4 cores is necessary: Core::System::GetInstance().ArmInterface(0).ClearInstructionCache(); Core::System::GetInstance().ArmInterface(1).ClearInstructionCache(); Core::System::GetInstance().ArmInterface(2).ClearInstructionCache(); Core::System::GetInstance().ArmInterface(3).ClearInstructionCache(); This is kind of... well, silly to copy around whenever it's needed. especially when it can be reduced down to a single line. This change also puts the basics in place to begin "ungrafting" all of the forwarding member functions from the System class that are used to access CPU state or invoke CPU-specific behavior. As such, this change itself makes no changes to the direct external interface of System. This will be covered by another changeset.
2018-11-22macro_interpreter: Implement AddWithCarry and SubtractWithBorrow.bunnei2-8/+25
- Used by Undertale.
2018-11-22audout_u: Add support for multiple IAudioOut streams.bunnei2-9/+22
- Used by Undertale.
2018-11-22maxwell_3d: Implement alternate blend equations.bunnei2-0/+12
- Used by Undertale.
2018-11-22common/thread: Drop Hungarian notation on SetCurrentThreadName's parameterLioncash1-7/+7
This is inconsistent with our coding style.
2018-11-22scheduler: Add explanations for YieldWith and WithoutLoadBalancingZach Hilman6-79/+141
2018-11-22common/thread: Make Barrier's 'count' member non-constLioncash1-1/+1
While admirable as a means to ensure immutability, this has the unfortunate downside of making the class non-movable. std::move cannot actually perform a move operation if the provided operand has const data members (std::move acts as an operation to "slide" resources out of an object instance). Given Barrier contains move-only types such as std::mutex, this can lead to confusing error messages if an object ever contained a Barrier instance and said object was attempted to be moved.
2018-11-22common/thread: Initialize class member variables where applicableLioncash1-6/+4
Simplifies the constructor interfaces for Barrier and Event classes.
2018-11-22common/thread: Group non-member functions togetherLioncash1-3/+2
Keeps the non-member interface in one spot instead of split into two places, making it nicer to locate functions.
2018-11-22common/thread: Remove SleepCurrentThread()Lioncash2-12/+0
This is also unused and superceded by standard functionality. The standard library provides std::this_thread::sleep_for(), which provides a much more flexible interface, as different time units can be used with it.
2018-11-22common/thread: Remove unused CurrentThreadId()Lioncash2-12/+0
This is an old function that's no longer necessary. C++11 introduced proper threading support to the language and a thread ID can be retrieved via std::this_thread::get_id() if it's ever needed.
2018-11-22common: Remove bit_set.hLioncash2-245/+0
This is an analog of BitSet from Dolphin that was introduced to allow iterating over a set of bits. Given it's currently unused, and given that std::bitset exists, we can remove this. If it's ever needed in the future it can be brought back.
2018-11-22applets: Add StubAppletZach Hilman3-0/+98
This will log all data it receives, log all calls to its methods and push dummy data into both channels on execution.
2018-11-22gl_shader_decompiler: Rename internal flag stringsReinUsesLisp1-15/+20
2018-11-22gl_shader_decompiler: Rename control codes to condition codesReinUsesLisp2-67/+50
2018-11-22Automatically disable joycons dockedgreggameplayer1-0/+4
when docked mode is enable
2018-11-22gl_shader_decompiler: Fix register overwriting on texture callsReinUsesLisp1-60/+78
2018-11-22kernel/handle_table: Move private static functions into the cpp fileLioncash2-7/+9
These don't depend on class state, and are effectively implementation details, so they can go into the cpp file .
2018-11-22kernel/handle_table: Restrict handle table size to 1024 entriesLioncash1-5/+2
The previous handle table size is a holdover from Citra. The actual handle table construct on Horizon only allows for a maximum of 1024 entries.
2018-11-22kernel/handle_table: Default destructor in the cpp fileLioncash2-0/+3
We don't need to potentially inline the teardown logic of all of the handle instances.
2018-11-21Properly Implemented TXQ InstructionFernandoS271-2/+12
2018-11-21gl_shader_decompiler: Implement BFI_IMM_RReinUsesLisp2-0/+23
2018-11-21nvhost_ctrl_gpu: Implement IoctlGetGpuTime.bunnei2-0/+19
- Used by Undertale.
2018-11-21Removed pre 4.3 ARB extensionsFernandoS277-48/+13
2018-11-21Update OpenGL's backend version from 3.3 to 4.3FernandoS273-4/+4
2018-11-21Use default values for unknown framebuffer pixel formatFernandoS272-0/+8
2018-11-21common: Remove dependency on xbyakLioncash3-274/+0
Xbyak is currently entirely unused. Rather than carting it along, remove it and get rid of a dependency. If it's ever needed in the future, then it can be re-added (and likely be more up to date at that point in time).
2018-11-21gl_shader_decompiler: Implement R2P_IMMReinUsesLisp2-0/+42
2018-11-21common/math_util: Simplify std::make_signed usages to std::make_signed_tLioncash1-2/+2
Gets rid of the need to use typename to access the ::type alias.
2018-11-21common/math_util: Make Rectangle's constructors constexprLioncash1-2/+2
Allows objects that contain rectangle instances to be constexpr constructible as well.
2018-11-21common/math_util: Remove unnecessary static from PILioncash1-1/+1
const/constexpr variables have internal linkage by default.
2018-11-21common/math_util: Remove unused IntervalsIntersect() functionLioncash1-6/+0
This hasn't been used since the project started, so we may as well get rid of it to keep it from bit rotting.
2018-11-21gl_shader_decompiler: Remove UNREACHABLE when setting RZReinUsesLisp1-2/+1
2018-11-21gl_shader_decompiler: Use UNIMPLEMENTED instead of LOG+UNREACHABLE when applicableReinUsesLisp1-371/+258
2018-11-21maxwell_3d: Initialize rasterizer color mask registers as enabled.bunnei1-0/+9
- Fixes rendering regression with Sonic Mania.
2018-11-21am: Correct build failureLioncash1-2/+2
The interface for shared memory was changed, but another commit was merged that relied on the (previously public) internals of SharedMemory. This amends that discrepancy.
2018-11-21patch_manager: Show LayeredExeFS patch in add-ons columnZach Hilman2-4/+15
The decision was made to name them LayeredExeFS instead of just LayeredFS to differentiate from normal RomFS-based mods. The name may be long/unweildy, but conveys the meaning well.
2018-11-21file_sys/card_image: Provide named members for the GamecardInfo structLioncash1-1/+12
Fills out the struct according to information provided by SwitchBrew
2018-11-21common/assert: Add UNIMPLEMENTED_IF and UNIMPLEMENTED_IF_MSG for conditional assertionsLioncash1-0/+3
Currently, there's no way to specify if an assertion should conditionally occur due to unimplemented behavior. This is useful when something is only partially implemented (e.g. due to ongoing RE work). In particular, this would be useful within the graphics code. The rationale behind this is it allows a dev to disable unimplemented feature assertions (which can occur in an unrelated work area), while still enabling regular assertions, which act as behavior guards for conditions or states which must not occur. Previously, the only way a dev could temporarily disable asserts, was to disable the regular assertion macros, which has the downside of also disabling, well, the regular assertions which hold more sanitizing value, as opposed to unimplemented feature assertions.
2018-11-20common/assert: Make the UNIMPLEMENTED macro properly assertLioncash1-1/+1
Currently, this was only performing a logging call, which doesn't actually invoke any assertion behavior. This is unlike UNIMPLEMENTED_MSG, which *does* assert. This makes the expected behavior uniform across both macros.
2018-11-20patch_manager: Apply LayeredExeFS patchesZach Hilman1-0/+25
This will scan the <mod>/exefs dir for all files and then layer those on top of the game's exefs and use this as the new exefs. This allows for overriding of the compressed NSOs or adding new files. This does use the same dir as IPS/IPSwitch patch, but since the loader will not look for those they are ignored.
2018-11-20settings: Add option to dump ExeFS of games upon launchZach Hilman7-0/+27
When enabled, all exefs(es) will be copied to yuzu/dump/<title_id>/exefs.
2018-11-20kernel/process: Move <random> include to the cpp fileLioncash2-1/+1
<random> isn't necesary directly within the header and can be placed in the cpp file where its needed. Avoids propagating random generation utilities via a header file.
2018-11-20shader_cache: Only lock covered instructions.Markus Wick4-8/+24
2018-11-20am/applets: Make the applet data broker part of the applet itself.Lioncash5-31/+36
The accessor should be doing just that, accessing, rather than retaining the lifetime of the data broker as well.
2018-11-20am/applets: Replace includes with forward declarations where applicableLioncash2-2/+9
Also resolve places where includes should have been provided, but weren't.
2018-11-20am/applets: Relocate comments above the relevant data member in AppletDataBrokerLioncash1-11/+18
Avoids wonky wrapping and makes it nicer to read.
2018-11-20yuzu/applets/software_keyboard: Override accept() and reject() instead of providing own differently named member functionsLioncash2-8/+8
Uses Qt's built-in interface instead of rolling our own separate one on top of it. This also fixes a bug in reject() where we were calling accept() instead of reject().
2018-11-20yuzu/applets/software_keyboard: std::move std::function instances where applicableLioncash1-2/+2
std::function instances can potentially allocate. std::moveing them prevents an avoidable allocation in that case.
2018-11-20yuzu/applets/software_keyboard: Make slots private functionsLioncash1-2/+1
These aren't required to be public.
2018-11-20Implemented Fast Layered CopyFernandoS272-2/+30
2018-11-20kernel/resource_limit: Clean up interfaceLioncash6-190/+81
Cleans out the citra/3DS-specific implementation details that don't apply to the Switch. Sets the stage for implementing ResourceLimit instances properly. While we're at it, remove the erroneous checks within CreateThread() and SetThreadPriority(). While these are indeed checked in some capacity, they are not checked via a ResourceLimit instance. In the process of moving out Citra-specifics, this also replaces the system ResourceLimit instance's values with ones from the Switch.
2018-11-20lm: Implement SetDestination by doing nothingLioncash1-1/+12
This service function was likely intended to be a way to redirect where the output of a log went. e.g. Firing a log over a network, dumping over a tunneling session, etc. Given we always want to see the log and not change its output. It's one of the lucky service functions where the easiest implementation is to just do nothing at all and return success.
2018-11-19software_keyboard: Fix erroneous extra PushNormalDataZach Hilman1-3/+2
2018-11-19software_keyboard: Return correct result code on user cancel operationZach Hilman3-5/+1
2018-11-19applet: Add AppletDataBroker to manage HLE to AM service interactionZach Hilman5-104/+194
This cleans up most of the callbacks and such in the Applets::Applet interface, while also properly implementing all four data channels.
2018-11-19software_keyboard: Use correct offset for inital text stringZach Hilman1-1/+2
2018-11-19kernel/shared_memory: Make Map() and Unmap() take the target process by reference rather than as a pointerLioncash3-12/+12
Both member functions assume the passed in target process will not be null. Instead of making this assumption implicit, we can change the functions to be references and enforce this at the type-system level.
2018-11-19kernel/shared_memory: Add a const qualified member function overload for GetPointer()Lioncash2-1/+12
Given this doesn't mutate instance state, we can provide a const-qualified variant as well.
2018-11-19kernel/shared_memory: Use 64-bit types for offset and size in CreateForAppletLioncash2-2/+2
Keeps the interface consistent with the regular Create() function.
2018-11-19kernel/shared_memory: Make GetPointer() take a std::size_t instead of a u32Lioncash2-2/+2
Makes the interface nicer to use in terms of 64-bit code, as it makes it less likely for one to get truncation warnings (and also makes sense in the context of the rest of the interface where 64-bit types are used for sizes and offsets
2018-11-19kernel/shared_memory: Make data members privateLioncash1-12/+17
Rather than allow unfettered access to the class internals, we hide all members by default and create and API that other code can operate against.
2018-11-19ldr: Clean up error codesLioncash1-29/+12
The separate enum isn't particularly necessary here, and the values can just be directly put into the ResultCode instances, given the names are also self-documenting here.
2018-11-19svc: Implement yield types 0 and -1Zach Hilman6-2/+130
2018-11-19filesystem: Clear registered union paths on factory creationZach Hilman2-0/+6
2018-11-19configure_input: Use Joycons Docked instead of Connected as labelZach Hilman1-1/+1
2018-11-19configure_input_player: Set minimum width on controlsZach Hilman2-23/+30
2018-11-19configure_input: Properly update UI components on removal of playerZach Hilman1-0/+2
2018-11-19configure_input: Make None a controller option instead of checkboxZach Hilman11-152/+148
2018-11-19hid: Use player-defined controller type as PREFERRED_CONTROLLERZach Hilman16-296/+234
2018-11-19qt: Move controller button config to separate dialogZach Hilman4-0/+1767
Handles button configuration for all controller layouts and debug pads. Configurable at construction.
2018-11-19qt: Add UI to configure touchscreen parametersZach Hilman4-0/+281
This allows adjusting the finger, diameter, and angle of the emulated touchscreen. It also provides a warning to the user about what changing these parameters can do.
2018-11-19qt: Add UI to configure mouse buttonsZach Hilman4-0/+542
Supports setting the five mouse buttons to any valid controller button/keyboard key (Left, Right, Middle, Foward, Back)
2018-11-19configure_input: Add support for multiplayer and controller typesZach Hilman3-998/+525
This moves the actual button configuration to a separate dialog and only has the enabled and type controls in the tab.
2018-11-19hid/npad: Update NPad to use player controller bindings and typeZach Hilman2-55/+108
2018-11-19hid/touchscreen: Update Touchscreen to use advanced parametersZach Hilman1-6/+6
Including finger ID, diamater x/y, and angle. Additionally, checks if the touchscreen is enabled.
2018-11-19hid: Add controller bindings for Mouse controllerZach Hilman2-4/+30
2018-11-19hid: Add keyboard bindings for Keyboard controllerZach Hilman2-2/+24
2018-11-19hid: Add controller bindings for DebugPad controllerZach Hilman2-21/+43
Used by developers to test games, not present on retail systems. Some games are known to respond to DebugPad input though, for example Kirby Star Allies.
2018-11-19yuzu/config: Add (de-)serialization for multiplayerZach Hilman2-21/+331
Defaults to full keyboard for keyboard -- It did not seem to be necessary to make the keyboard configurable (besides enabled/disabled).
2018-11-19yuzu_cmd/config: Add config deserialization for multiplayerZach Hilman1-37/+254
2018-11-19settings: Add settings for multiple players and controllersZach Hilman1-3/+48
Uses the PlayerInput struct to represent all of the data that constitutes a player.
2018-11-19settings: Add Native type for keyboardZach Hilman1-0/+210
2018-11-19settings: Add Native type for mouse buttonsZach Hilman2-0/+34
2018-11-19Added missing start/end touch attributes to touchscreenDavid Marcec2-1/+18
2018-11-19Added debugpad skeletonDavid Marcec2-2/+55
2018-11-19Added controller helper funcsDavid Marcec2-0/+35
2018-11-19Changed polling rate of hid and Right joycon rotationDavid Marcec1-2/+2
2018-11-19Left joycon rotation button remappingDavid Marcec2-7/+21
2018-11-19Added automatic npad switch based on supported stylesetsDavid Marcec2-4/+124
2018-11-19Added multi-input support and controller assignment at any portDavid Marcec2-122/+181
2018-11-19Removed hard coded values for width and heightDavid Marcec1-2/+4
2018-11-19software_keyboard: Check for UTF-8 config flagZach Hilman2-9/+23
2018-11-19Eliminated unnessessary memory allocation and copy (#1702)Frederic L3-9/+20
2018-11-19Correctly sets default system language for yuzu-CLI (#1727)Schplee1-0/+2
* Correctly sets default system language for yuzu-CLI A user reported that yuzu_cmd runs games in Japanese rather than the correct default of English (like yuzu-qt does correctly), this change fixes that. * fix clang issue deleted whitespace
2018-11-19gl_rasterizer: Remove default clip distanceReinUsesLisp1-2/+0
2018-11-18svc: ResetSignal is not stubbedTobias1-1/+1
https://user-images.githubusercontent.com/20753089/48677874-b8e01c80-eb7b-11e8-8043-b99faa29022c.PNG
2018-11-18software_keyboard: Add max and current length display to dialogZach Hilman2-1/+11
2018-11-18software_keyboard: Push all data over all channels on dialog completionZach Hilman1-18/+26
2018-11-18applet: Use std::queue instead of std::vector for storage stackZach Hilman5-18/+44
2018-11-18applet: Add operation completed callbackZach Hilman8-9/+34
2018-11-18software_keyboard: Push buffer size to offset 0x4 in output dataZach Hilman4-18/+39
2018-11-18software_keyboard: Make GetText asynchronousZach Hilman9-29/+64
a
2018-11-18am: Allow applets to push multiple and different channels of dataZach Hilman10-64/+62
2018-11-18am: Implement ILibraryAppletAccessor IsCompleted and GetResultZach Hilman2-4/+9
2018-11-18am: Implement text check software keyboard modeZach Hilman6-14/+120
Allows the game to verify and send a message to the frontend.
2018-11-18am: Deglobalize software keyboard appletZach Hilman17-100/+180
2018-11-18qt/main: Register Qt Software Keyboard frontend with AMZach Hilman3-0/+6
Allows using Qt provider over default.
2018-11-18am: Construct and use proper applets with ILibraryAppletAccessorZach Hilman1-1/+26
Allows use of software keyboard applet and future applets to be easily added by adding enum ID and a switch case.
2018-11-18qt/applets: Provide Qt frontend implementation of software keyboardZach Hilman3-0/+171
Implements all of the features of the keyboard, including length, default text, character validation, and UTF-16 character support.
2018-11-18am/applets: Add connector between frontend and AM applet classesZach Hilman3-0/+130
Provides a middleman between the Frontend provider class and the expected AM::Applets::Applet class needed by ILibraryAppletAccessor
2018-11-18frontend/applets: Add frontend software keyboard provider and defaultZach Hilman3-0/+63
Default implementation will return "yuzu" for any string. GUI clients (or CLI) can implement the Frontend::SoftwareKeyboardApplet class and register an instance to provide functionality.
2018-11-18am/applets: Add Applet superclass to describe a generic appletZach Hilman3-0/+77
Adds an Initialize and Execute methods which are used by the ILibraryAppletAccessor to start and control the applet.
2018-11-18am: Unstub ILibraryAppletAccessor::StartZach Hilman1-5/+17
Now starts the applet provided in constructor.
2018-11-18am: Implement PopInteractiveOutData and PushInteractiveInDataZach Hilman1-14/+24
Used by software keyboard applet for data transfer.
2018-11-18am: Convert storage stack to vectorZach Hilman1-27/+59
std::stack was no longer suitable for non-trivial operations
2018-11-18am: Move AM::IStorage to headerZach Hilman1-0/+16
Needs to be accessible by applet files.
2018-11-18am: Move IStorageAccessor to header and update backing bufferZach Hilman2-64/+62
Writes to an AM::IStorage object through an IStorageAccessor will now be preserved once the accessor is destroyed.
2018-11-18am: Implement CreateTransferMemoryStorageZach Hilman2-0/+26
Creates an AM::IStorage object with the contents of the transfer memory located at the handle provided.
2018-11-18string_util: Implement buffer to UTF-16 string helper functionZach Hilman2-0/+17
Needed as most all software keyboard functions use fixed-length UTF16 string buffers.
2018-11-18svc: Implement svcCreateTransferMemoryZach Hilman1-3/+33
Seems to be used and created identically to SharedMemory, so just reuse that.
2018-11-18drop support for non separate alpha as it seems to cause issues in some gamesRodolfo Bogado3-61/+35
2018-11-18ldr_ro: Add error check for memory allocation failureZach Hilman4-13/+27
2018-11-17fix sampler configuration, thanks to Marcos for his investigationRodolfo Bogado3-19/+57
2018-11-17small type fixRodolfo Bogado1-6/+6
2018-11-17small fix for alphaToOne bit locationRodolfo Bogado1-2/+2
2018-11-17fix for gcc compilationRodolfo Bogado1-60/+61
2018-11-17add AlphaToCoverage and AlphaToOneRodolfo Bogado5-1/+39
2018-11-17add support for fragment_color_clampRodolfo Bogado5-1/+24
2018-11-17add missing MirrorOnceBorder support where supportedRodolfo Bogado1-0/+6
2018-11-17set border color not depending on the wrap modeRodolfo Bogado1-9/+9
only enable color mask for the first framebuffer id independent blending is disabled
2018-11-17set default value for point size registerRodolfo Bogado2-5/+4
2018-11-17fix viewport and scissor behaviorRodolfo Bogado6-64/+89
2018-11-17vi: Implement TransactParcel for Disconnect and DetachBufferZach Hilman1-0/+22
Used by homebrew on exit. According to switchbrew, returns an empty response parcel with one zero in it.
2018-11-17Stubbed am:EnableApplicationCrashReportMysticExile2-10/+18
2018-11-17gl_rasterizer: Skip VB upload if the state is clean.Markus Wick9-6/+60
2018-11-17hwopus: DecodeInterleavedWithPerformance: Fix ordering of output parameters.bunnei1-1/+1
- Fixes audio issues with Pokemon: Let's Go Pikachu & Eevee.
2018-11-17Implemented CalculateStandardUserSystemClockDifferenceByUserDavid Marcec3-1/+18
Seems pokemon calls this sometimes and it caused "random crashes"
2018-11-17textures/decoders: Replace magic numbersFrederic Laing1-37/+33
2018-11-16kernel/errors: Clean up error codesLioncash2-62/+32
Similar to PR 1706, which cleans up the error codes for the filesystem code, but done for the kernel error codes. This removes the ErrCodes namespace and specifies the errors directly. This also fixes up any straggling lines of code that weren't using the named error codes where applicable.
2018-11-16Common/Bitfield: store value as unsigned typeWeiyi Wang1-9/+10
Storing signed type causes the following behaviour: extractValue can do overflow/negative left shift. Now it only relies on two implementation-defined behaviours (which are almost always defined as we want): unsigned->signed conversion and signed right shift
2018-11-16Added various bluetooth based cmds for palmaDavid Marcec2-1/+145
It seems palma is done through bluetooth, we need this for pokemon go however more research needs to be done when we actually get palma working. This is presumably used for transfering data between the controller and the console, it does not seem for actual input as far as I know.
2018-11-16Added SetIsPalmaAllConnectable, SetPalmaBoostModeDavid Marcec1-2/+14
Currently unclear what these do yet, will be researched at a later time when we want to implement palma.
2018-11-16Fixed switching operation modes when not running a gameDavid Marcec1-0/+3
The service manager seems to be a nullptr before a game boots
2018-11-16Report resolution scaling support for vi and amDavid Marcec3-60/+76
Specifying an internal resolution in yuzu now will report the scaled changes to vi and am.
2018-11-16file_sys/errors: Remove currently unused filesystem error codesLioncash1-10/+0
Rather than keeping around unused values, we can just introduce them as needed.
2018-11-16file_sys/errors: Get rid of the ErrCodes namespaceLioncash1-17/+5
There's no real point to keeping the separate enum around, especially given the name of the error code itself is supposed to document what the value actually represents.
2018-11-16file_sys/errors: Extract FS-related error codes to file_sys/errors.hLioncash4-14/+19
Keeps filesystem-related error codes in one spot.
2018-11-16Fixed priority switching edge case for handheld (#1675)David1-12/+46
* Fixed priority switching edge case for handheld We accidently used controller index instead of npad id * Moved NPadIdToIndex
2018-11-16fsp_srv: Add support for using open source archive if not found in NANDZach Hilman1-0/+10
2018-11-16file_sys: Add framework for synthesizing open source archivesZach Hilman3-0/+109
2018-11-16vfs_vector: Add VFS backend for std::arrayZach Hilman1-0/+52
Allows using constexpr/static const data with VFS.
2018-11-16csrng: Use random integer distribution instead of raw engineZach Hilman1-1/+2
Prevents returning the same value every single call.
2018-11-15textures/decoders: Minor cleanupFrederic Laing1-16/+16
2018-11-15gl_rasterizer_chache: Minor cleanupFrederic Laing1-3/+3
2018-11-15ldr_ro: Implement UnloadNro (command 1)Zach Hilman1-22/+85
Includes actual unmapping and address error checking.
2018-11-15ldr_ro: Fully Implement LoadNro (command 0)Zach Hilman1-11/+110
Includes NRO and BSS error checking, maximum loaded NRO check, NRR hash check, and proper remapping of BSS data.
2018-11-15ldr_ro: Implement UnloadNrr (command 3)Zach Hilman1-2/+84
Includes initialization check, proper address check, alignment check, and actual unloading of a loaded NRR.
2018-11-15ldr_ro: Fully implement LoadNrr (command 2)Zach Hilman1-0/+112
Includes parameter error checking, hash enforcement, initialization check, and max NRR load check.
2018-11-15process: Make MirrorMemory take state to map new memory asZach Hilman2-3/+7
Credits to Subv
2018-11-15pl_u: Resize buffers in shared font data getter to what game requestsZach Hilman1-0/+8
Fixes unmapped spam in SMP and buffer size errors in some other games
2018-11-14service/acc: Correct error case within TrySelectUserWithoutInteraction()Lioncash1-2/+4
empty() in this case will always return false, since the returned container is a std::array. Instead, check if all given users are invalid before returning the error code.
2018-11-14profile_manager: Replace iterative loop with a ranged-for loop in ParseUserSaveFile()Lioncash1-4/+5
2018-11-14profile_manager: Move UUID Format function definitions into the cpp fileLioncash2-11/+18
Avoids relying on fmt always being indirectly included.
2018-11-14yuzu/configure_system: Mark the entropy mask string as nontranslatableLioncash1-1/+1
There's no need for translators to concern themselves with the validation mask used by the entry field.
2018-11-14nfp: Correct erroneous sizeof expression within GetTagInfo()Lioncash1-1/+1
The previous expression would copy sizeof(size_t) amount of bytes (8 on a 64-bit platform) rather than the full 10 bytes comprising the uuid member. Given the source and destination types are the same, we can just use an assignment here instead.
2018-11-14service/audren_u: Forward RequestUpdateAuto through the same function as RequestUpdateLioncash1-3/+3
Based off RE, they both currently go through the same codepath with no difference in behavior.
2018-11-14hid/npad: Add missing break in switch statement within Controller_NPad::OnUpdate()Lioncash1-0/+1
2018-11-14service: Mark MakeFunctionString with the [[maybe_unused]] attribute.Lioncash1-2/+2
When yuzu is compiled in release mode this function is unused, however, when compiled in debug mode, it's used within a LOG_TRACE statement. This prevents erroneous compilation warnings about an unused function (that isn't actually totally unused).
2018-11-14kernel/thread: Deduplicate scheduler switching codeLioncash2-37/+13
The code in both places was the same verbatim, so we can extract it to a function to deduplicate the logic.
2018-11-14string_util: Remove ArrayToString()Lioncash2-21/+0
An old function from Dolphin. This is also unused, and pretty inflexible when it comes to printing out different data types (for example, one might not want to print out an array of u8s but a different type instead. Given we use fmt, there's no need to keep this implementation of the function around.
2018-11-14string_util: Remove TryParse()Lioncash2-54/+3
This is an unused hold-over from Dolphin that was primarily used to parse values out of the .ini files. Given we already have libraries that do this for us, we don't need to keep this around.
2018-11-13qt: Move Open yuzu Folder action from Help to FileZach Hilman1-1/+2
2018-11-13video_core/renderer_base: Remove GL include from the renderer base class filesLioncash1-1/+0
Keeps the base class source files implementation-agnostic.
2018-11-13string_util: Remove ThousandSeparate()Lioncash1-14/+0
This is currently unused and doesn't really provide much value to keep around either.
2018-11-13hle/audren_u: Implement Get/SetRenderingTimeLimitLioncash1-2/+23
These appear to be a basic getter and setter pair, so these are fairly trivial to implement and get out of the way.
2018-11-13audio_core/audio_renderer: Fix typo in AuxInfo member nameLioncash1-1/+1
2018-11-13vm_manager: Unstub GetTotalHeapUsage()Lioncash1-2/+1
Now that we've moved all of the heap-related stuff to the VMManager class, we can unstub this function, as the necessary members are visible now.
2018-11-13kernel/process: Migrate heap-related memory management out of the process class and into the vm managerLioncash4-84/+97
Avoids a breach of responsibilities in the interface and keeps the direct code for memory management within the VMManager class.
2018-11-13svc: Use proper random entropy generation algorithmZach Hilman6-8/+33
2018-11-13GDBStub improvements:Hedges1-37/+86
- Add FPU support - Fix access to TLS Fix clang-format.
2018-11-13yuzu: Add hotkey for Amiibo loadingfearlessTobi1-1/+9
2018-11-13gl_rasterizer: Minor cleanupFrederic L1-4/+2
Minor code cleanup from unaddressed feedback in #1654
2018-11-13gl_state: Amend compilation warningsLioncash2-3/+4
Makes float -> integral conversions explicit via casts and also silences a sign conversion warning.
2018-11-13svc: Return random seed for svcGetInfo RandomEntropyZach Hilman2-4/+8
2018-11-13Implement ASTC_2D_10X8 & ASTC_2D_10X8_SRGB (#1666)greggameplayer4-71/+101
* Implement ASTC_2D_10X8 & ASTC_2D_10X8_SRGB ( needed by Mario+Rabbids Kingdom Battle ) * Small placement correction
2018-11-12yuzu: Add a missing "!" to fix the stuck-in-fullscreen bugTobias1-1/+1
2018-11-12settings: Add config option to set RNG seedZach Hilman6-100/+171
2018-11-12csrng: Use std::mt19937 engine for random number generationZach Hilman2-2/+11
2018-11-11Use core extensions when available to set max anisotropic filtering levelRodolfo Bogado1-2/+7
2018-11-11Improve state management by splitting some of the states id separated function to avoid a full apply overheadRodolfo Bogado6-39/+40
2018-11-11Try to fix problems with stencil test in some games, relax translation to opengl enums to avoid crashing and only generate logs of the errors.Rodolfo Bogado4-37/+61
2018-11-11set sampler max lod, min lod, lod bias and max anisotropyRodolfo Bogado3-13/+33
2018-11-11Improved GPU Caches lookup SpeedFernandoS271-18/+17
2018-11-10Added maybe_unusedDavid Marcec2-2/+7
2018-11-10Added ToPosixTime & ToPosixTimeWithMyRuleDavid Marcec1-2/+41
Added instead of using a seperate PR to prevent conflicts
2018-11-10gl_shader_decompiler: Guard out of bound geometry shader input readsReinUsesLisp4-15/+24
Geometry shaders follow a pattern that results in out of bound reads. This pattern is: - VSETP to predicate - Use that predicate to conditionally set a register a big number - Use the register to access geometry shaders At the time of writing this commit I don't know what's the intent of this number. Some drivers argue about these out of bound reads. To avoid this issue, input reads are guarded limiting reads to the highest posible vertex input of the current topology (e.g. points to 1 and triangles to 3).
2018-11-10Added consts and staticDavid Marcec1-6/+6
2018-11-09Implement GetClockSnapshotDavid Marcec3-21/+88
Needed by megaman 11
2018-11-08gl_rasterizer_cache: Remove unnecessary memory allocation and copy in CopySurfaceFrederic Laing1-10/+7
2018-11-08gl_rasterizer: Fix compiler warningsFrederic Laing1-2/+2
2018-11-08rasterizer_cache: Remove reliance on the System singletonLioncash9-10/+25
Rather than have a transparent dependency, we can make it explicit in the interface. This also gets rid of the need to put the core include in a header.
2018-11-08rasterizer_cache: Add missing virtual destructor to RasterizerCacheObjectLioncash3-0/+10
Ensures that destruction will always do the right thing in any context.
2018-11-08gl_resource_manager: Amend clang-format discrepanciesLioncash1-4/+2
Fixes the buildbot.
2018-11-08svcBreak now dumps information from the debug buffer passed (#1646)David1-0/+28
* svcBreak now dumps information from the debug buffer passed info1 and info2 seem to somtimes hold an address to a buffer, this is usually 4 bytes or the size of the int and contains an error code. There's other circumstances where it can be something different so we hexdump these to examine them at a later date. * Addressed comments
2018-11-08Correct issue where texturelod could not be applied to 2darrayshadowFernandoS271-1/+5
2018-11-08Renamed CheckIfOperationChanged to OnDockedModeChangedDavid Marcec2-21/+23
2018-11-07Implement 3 coordinate array in TEXS instructionFernandoS271-6/+6
2018-11-07Updated npad styles on holdtype switchesDavid Marcec1-0/+2
Fixes input for megaman
2018-11-07FixupsDavid Marcec3-12/+17
2018-11-07Ability to switch between docked and undocked mode in-gameDavid Marcec7-36/+163
Started implementation of the AM message queue mainly used in state getters. Added the ability to switch docked mode whilst in game without stopping emulation. Also removed some things which shouldn't be labelled as stubs as they're implemented correctly
2018-11-07fixed spelling errorDavid Marcec1-1/+1
2018-11-07Added missing logDavid Marcec1-0/+1
2018-11-07Implement acc:TrySelectUserWithoutInteractionDavid Marcec5-3/+25
Needed for Shantae - Half-Genie Hero - Ultimate Edition!
2018-11-06gl_rasterizer: Skip VAO binding if the state is clean.Markus Wick3-2/+21
2018-11-06gl_rasterizer: Split VAO and VB setup functions.Markus Wick2-5/+16
2018-11-06gl_rasterizer_cache: Add profiles for Copy and Blit.Markus Wick1-2/+6
They were missed, and Copy is very high in profile here. It doesn't block the GPU, but it stalls the driver thread. So with our bad GL instructions, this might block quite a while.
2018-11-06gl_resource_manager: Profile creation and deletion.Markus Wick1-0/+42
2018-11-06gl_stream_buffer: Profile orphaning of stream buffer.Markus Wick1-0/+5
This serialize to the driver thread and so it may block for a while. So if it is in the benchmark, we get noticed if it happens too often.
2018-11-06microprofile: Drop ReleaseActiveBuffer scope.Markus Wick1-4/+0
This was created with the unfinished resampling PR in mind. As the resampling is now on the audio thread, we don't need to care about this here any more.
2018-11-06configure_system: Fix compiler warningFrederic Laing2-3/+3
2018-11-06yuzu/main: Fix compiler warningFrederic Laing1-1/+2
2018-11-06gl_resource_manager: Split implementations in .cpp file.Markus Wick5-114/+167
Those implementations are quite costly, so there is no need to inline them to the caller. Ressource deletion is often a performance bug, so in this way, we support to add breakpoints to them.
2018-11-06Implement SetMemoryPermissionFrederic Laing1-3/+39
2018-11-05Add support to color mask to avoid issues in blending caused by wrong values in the alpha channel in some render targets.Rodolfo Bogado5-25/+79
2018-11-05Implement multi-target viewports and blendingRodolfo Bogado6-128/+259
2018-11-04Fix quickstart linkDharmin K Shah1-1/+1
2018-11-04Fix typo in BufferTransformFlagsFrederic Laing1-2/+2
2018-11-04game_list: Only reload game list after relevant settings changedZach Hilman5-1/+28
Prevents unnecessary reloads on every configuration operation.
2018-11-04sm: Implement RegisterService and UnregisterServiceZach Hilman2-2/+55
These are needed by Edizon to boot. They are used to see if a user is using SX OS, as SX OS registers a custom service called 'tx' and attempting to register a service of the same name lets the application know if it is present.
2018-11-03qt: Add help option to open yuzu folderZach Hilman3-0/+13
Opens a new file manager window at the UserDir.
2018-11-03Stubbed SetMemoryPermissionFrederic Laing2-1/+12
2018-11-02correct syntaxgreggameplayer1-4/+3
2018-11-02Fixed incorrect hwopus assertDavid Marcec1-1/+1
2018-11-02Fixed HID crash when launching more than 1 game & signaled syleset change eventDavid Marcec2-0/+5
This should fix crashes when launching multiple games in yuzu
2018-11-02game_list: Make add-ons column optionalZach Hilman6-119/+166
As the add-ons column takes the most processing time out of any (as it needs to search registration for updates/dlc, patch control NCAs, search for mods, etc.), an option was added to disable it. This does not affect the application of add-ons. In large game collections, this decreases game list refresh time by as much as 70%.
2018-11-02filesystem: Cache RegisteredCacheUnion instead of constructing on demandZach Hilman2-4/+11
Prevents unnecessary re-reads of the metadata and unnecessary temporary objects.
2018-11-02file_sys: Use common KeyManager in NCA container typesZach Hilman6-7/+18
Creates a single KeyManager for the entire container and then passes it into the NCA constructor, eliminating several unnecessary KeyManager reads.
2018-11-02content_archive: Add optional KeyManager parameter to constructorZach Hilman2-3/+5
Allows resuing a common KeyManager when a large amount of NCAs are handled by the same class. Should the parameter not be provided, a new KeyManager will be constructed, as was the default behavior prior to this.
2018-11-02Fix ASTC Decompressor to support depth parameterFernandoS277-65/+131
2018-11-01memory_manager: Do not MapBufferEx over already in use memory.bunnei2-31/+52
- This fixes rendering when changing areas in Super Mario Odyssey.
2018-11-01Fix ASTC formatsFernandoS274-12/+21
2018-11-01Implemented ASTC 5x5FernandoS271-1/+5
2018-11-01Implement Cube ArraysFernandoS274-0/+20
2018-11-01maxwell_3d: Restructure macro upload to use a single macro code memory.bunnei4-27/+55
- Fixes an issue where macros could be skipped. - Fixes rendering of distant objects in Super Mario Odyssey.
2018-10-31configure_system: Contrain profile usernames to 32 charactersLioncash5-25/+113
Previously, we would let a user enter an unbounded name and then silently truncate away characters that went over the 32-character limit. This is kind of bad from the UX point of view, because we're essentially not doing what the user intended in certain scenarios. Instead, we clamp it to 32 characters and make that visually apparent in the dialog box to provide a name for a user.
2018-10-31Implement SurfaceTarget Texture2DArraygreggameplayer1-0/+1
( needed by Mario+Rabbids Kingdom Battle )
2018-10-31Improve OpenGL state handlingRodolfo Bogado3-105/+158
2018-10-30service/usb: Update IPdSession's function tableLioncash1-3/+3
Updated based off information on SwitchBrew.
2018-10-30video_core: Move surface declarations out of gl_rasterizer_cacheReinUsesLisp6-898/+954
2018-10-30Assert Control Codes GenerationFernandoS272-1/+103
2018-10-30general: Remove unused boost inclusions where applicableLioncash3-4/+0
Cleans up unused includes and trims off some dependencies on externals.
2018-10-30global: Use std::optional instead of boost::optional (#1578)Frederic L49-266/+274
* get rid of boost::optional * Remove optional references * Use std::reference_wrapper for optional references * Fix clang format * Fix clang format part 2 * Adressed feedback * Fix clang format and MacOS build
2018-10-30hle_ipc: Add member function for querying the existence of a domain headerLioncash3-3/+6
Gets rid of the need to call the getter and then check for null.
2018-10-30hle_ipc: Make GetDomainMessageHeader return a regular pointerLioncash2-3/+3
Nothing requires the shared owner ship here, so we can just return a plain pointer.
2018-10-29ns: Implement command 400: GetApplicationControlDataZach Hilman4-17/+75
Returns the raw NACP bytes and the raw icon bytes into a title-provided buffer. Pulls from Registration Cache for control data, returning all zeros should it not exist.
2018-10-29patch_manager: Add support for dumping decompressed NSOsZach Hilman2-1/+14
When enabled in settings, PatchNSO will dump the unmodified NSO that it was passed to a file named <build id>.nso in the dump root for the current title ID.
2018-10-29settings: Add setting to control NSO dumpingZach Hilman6-1/+28
Also adds UI option in Debug > Dump section, with the idea later things to be dumped (i.e. other game data or textures, etc) will use the same group box.
2018-10-29bis_factory: Add getter for mod dump root for a title IDZach Hilman4-6/+33
Equates to yuzu_dir/dump/<title id>/
2018-10-29fsp_srv: Implement ISaveDataInfoReaderZach Hilman1-0/+144
An object to read SaveDataInfo objects, which describe a unique save on the system. This implementation iterates through all the directories in the save data space and uses the paths to reconstruct the metadata.
2018-10-29fsp_srv: Implement command 61: OpenSaveDataInfoReaderBySaveDataSpaceIdZach Hilman2-1/+13
Needed by Checkpoint. Returns an object that can iterate through all savedata on the system.
2018-10-29savedata_factory: Expose accessors for SaveDataSpaceZach Hilman4-14/+32
2018-10-29loader/nro: Call RegisterRomFS from LoadZach Hilman1-0/+5
Allows NRO homebrew to use the RomFS in the ASET section.
2018-10-29control_metadata: Add GetRawBytes function to NACPZach Hilman2-0/+7
Returns the raw bytes of the NACP file. Needed for GetApplicationControlData which returns the raw, unprocessed NACP to the game.
2018-10-29time_stretch: Switch to values of CitrafearlessTobi1-3/+3
2018-10-29video_core: Move OpenGL specific utils to its rendererReinUsesLisp6-30/+61
2018-10-29renderer_opengl: Correct bpp value for ASTC_2D_8X5_SRGBRodolfo Bogado1-1/+1
2018-10-29Assert Control Flow Instructions using Control CodesFernandoS272-3/+28
2018-10-29Fixed black textures, pixelation and we no longer require to auto-generate mipmapsFernandoS271-14/+2
2018-10-29Fixed mipmap block autosizing algorithmFernandoS273-13/+25
2018-10-29Fixed Invalid Image size and Mipmap calculationFernandoS271-4/+7
2018-10-29Fixed Block Resizing algorithm and Clang FormatFernandoS273-12/+19
2018-10-29Implement Mip FilterFernandoS274-10/+33
2018-10-29Zero out memory region of recreated surface before flushingFernandoS271-0/+2
2018-10-28Implement MipmapsFernandoS272-101/+211
2018-10-28core: Make System references const where applicableLioncash2-3/+3
2018-10-28core: Add missing const variants of getters for the System classLioncash2-10/+49
Many of the Current<Thing> getters (as well as a few others) were missing const qualified variants, which makes it a pain to retrieve certain things from const qualified references to System.
2018-10-28Enable alpha channel for DXT1 texture formatMichael1-2/+2
2018-10-28configure_system: Fix compiler warningFrederic Laing1-1/+1
2018-10-28Correct bpp value for ASTC_2D_8X5Tobias1-1/+1
2018-10-28Refactor precise usage and add FMNMX, MUFU, FMUL32 and FADD332FernandoS272-74/+37
2018-10-28compatdb: Use a seperate endpoint for testcase submissionfearlessTobi7-7/+65
2018-10-28file_sys/patch_manager: Remove unnecessary if-statements (#1586)Frederic L1-7/+6
* remove unnecessary if-statements * Addressed feedback
2018-10-28Implement sRGB Support, including workarounds for nvidia driver issues and QT sRGB supportRodolfo Bogado8-40/+197
2018-10-28key_manager: Use isxdigit instead of isdigit when reading key fileZach Hilman1-1/+1
Crypto revisions are hex numbers and this function only checks if the string is valid for stoul in base 16, so it should be isxdigit.
2018-10-28Improved Shader accuracy on Vertex and Geometry Shaders with FFMA, FMUL and FADDFernandoS272-6/+58
2018-10-27Implement Default Block Height for each formatFernandoS271-0/+62
2018-10-27loader/nsp: Move secondary loader initialization to constructorZach Hilman1-17/+20
Prevents nullptr bug when trying to dump the RomFS of an NSP resulting from secondary_loader not being initialized.
2018-10-27gl_rasterizer_cache: Fix compiler warningFrederic Laing1-2/+2
2018-10-27service/filesystem: Add DirectoryDelete & DirectoryDeleteRecursivelyDeeJayBro1-2/+26
2018-10-27configure_system: Make GetIcon() return the scaled 64x64 iconLioncash1-14/+7
Avoids the need to put the scaling parameters all over the place for the common case. The only other time scaling is done is to generate the smaller 48x48 image, so this is fine.
2018-10-27configure_system: Move entry formatting for the user account list entries to its own functionLioncash1-18/+22
Avoids the need to duplicate this all over the place, and makes it translator-friendly across the board.
2018-10-27configure_system: Display errors to the user if file operations fail when setting user imagesLioncash1-24/+46
We should display an error to the user if setting a user image for an account fails, rather than continuing onwards.
2018-10-27cubeb_sink: ignore null-name device when selectingWeiyi Wang1-1/+2
We already ignore them on listing devices. We should do the same when selecting devices. This fix a crash when opening a specific device while there is a null device in the list
2018-10-26svc: Localize the GetInfo enum class to the function itselfLioncash2-32/+31
Nothing from this enum is intended to be used outside of this function.
2018-10-26svc: Implement svcGetInfo command 0xF0000002Lioncash6-4/+98
This retrieves: if (curr_thread == handle_thread) { result = total_thread_ticks + (hardware_tick_count - last_context_switch_ticks); } else if (curr_thread == handle_thread && sub_id == current_core_index) { result = hardware_tick_count - last_context_switch_ticks; }
2018-10-26gl_rasterizer: Implement primitive restart.bunnei5-1/+40
2018-10-26maxwell_3d: Add code for initializing register defaults.bunnei2-1/+21
2018-10-26gl_rasterizer: Implement depth range.bunnei4-13/+20
2018-10-26ldr: Partially implement LoadNro.bunnei1-3/+49
- This is an incomplete implementation. It was tested with Super Mario Party.
2018-10-26process: LoadModule should clear JIT instruction cache.bunnei1-0/+6
2018-10-26Kernel/Memory: Added a function to first a suitable guest address at which to allocate a region of a given size.bunnei2-0/+28
2018-10-26nro: Make LoadNro method accessible outside of apploader code.bunnei2-6/+18
2018-10-25configure_system: Make the file selector text translatableLioncash1-1/+1
This should be localizable, since it's user-facing text.
2018-10-25configure_system: Make GetAccountUsername() an internal functionLioncash2-25/+28
We can just make the function accept an arbitrary ProfileManager reference and operate on that instead of tying the function to the class itself. This allows us to keep the function internal to the cpp file and removes the need to forward declare the UUID struct.
2018-10-25configure_system: Default initialize member variablesLioncash1-4/+5
These should be initialized to deterministic values so it's easier to catch improper behavior, as it'll always be reproducable, instead of performing uninitialized reads.
2018-10-25configure_system: Simplify UUID generation call in AddUser()Lioncash1-2/+1
This is a static function so we can just perform an assignment directly.
2018-10-25configure_system: Amend function casingLioncash2-6/+6
2018-10-25configure_system: Add missing override specifier on the destructorLioncash1-1/+1
2018-10-25configure_system: Make public slots privateLioncash1-7/+5
These are only used within this class, so we can make them private to keep their use contained. This also gets rid of the pre-Qt5 'slot' identifier, since Qt 5's connection syntax doesn't require a function to be declared a slot anymore.
2018-10-25ips_layer: Use rle_size instead of data_size in RLE patch applicationZach Hilman1-1/+1
Prevents a potential bug when using RLE records in an IPS patch.
2018-10-25service/usb: Update service function tablesLioncash1-21/+22
Updated based off the information provided by Hexkyz on Switchbrew.
2018-10-25service/acc: Move fallback image to file scopeLioncash1-14/+13
This is just flat data, so it doesn't really need to be in the function itself. This also allows deduplicating the constant for the backup size in GetImageSize().
2018-10-25service/acc: Silence compiler warningsLioncash1-5/+8
Silences compiler warnings related to truncation. This also introduces a small helper function to perform the clamping of the image size.
2018-10-25service/acc: Early return in failure case in LoadImage()Lioncash1-8/+8
Allows unindenting the other branch's code.
2018-10-24Implemented LD_L and ST_LFernandoS273-12/+112
2018-10-24Implement Shader Local MemoryFernandoS271-0/+37
2018-10-24kernel/errors: Remove now-unused, unnecessary, error codesLioncash2-13/+0
Now that we've gotten the innaccurate error codes out of the way, we can finally toss away a bunch of these, trimming down the error codes to ones that are actually used and knocking out two TODO comments.
2018-10-24kernel/shared_memory: Return ERR_INVALID_MEMORY_PERMISSIONS instead of ERR_INVALID_COMBINATIONLioncash1-4/+3
This is more consistent with what the kernel does.
2018-10-24kernel/server_port: Simplify emptiness check within ShouldWait()Lioncash1-1/+1
2018-10-24kernel/server_port: Change error case return value in Accept() to ERR_NOT_FOUNDLioncash2-3/+1
This is what the kernel does in this instance.
2018-10-24kernel/error: Remove leftover 3DS error codesLioncash1-5/+0
These are now entirely unused and can be removed.
2018-10-24kernel/svc: Amend returned error code for invalid priorities in CreateThreadLioncash1-1/+1
Like with the previous change, the kernel doesn't return NOT_AUTHORIZED here. It returns INVALID_THREAD_PRIORITY.
2018-10-24kernel/svc: Move and correct returned error code for invalid thread priorities in SetThreadPriority()Lioncash1-5/+6
All priority checks are supposed to occur before checking the validity of the thread handle, we're also not supposed to return ERR_NOT_AUTHORIZED here.
2018-10-24kernel/error: Add error code for invalid pointersLioncash1-1/+1
The kernel appears to return 0xE601 for this situation. Particularly in svcWaitSynchronization, svcReplyAndReceive, and svcGetThreadContext
2018-10-24kernel/error: Add error code for closed sessionsLioncash1-1/+3
The kernel appears to return 0xF601 for this case.
2018-10-24game_list_worker: Use QString's formatting instead of fmt in FormatPatchNameVersions()Lioncash1-4/+9
Using fmt here requires unnecessary string conversions back into QString. Instead, we can just use QString's formatting and get the end result of the formatting operation in the proper type.
2018-10-24profile_manager: Use std::optional instead of boost::optionalLioncash5-48/+53
Now that we can actually use std::optional on macOS, we don't need to continue using boost::optional here.
2018-10-24graphic_breakpoints: Correct translation of strings in BreakpointModel's data() functionLioncash2-15/+20
tr() will not function properly on static/global data like this, as the object is only ever constructed once, so the strings won't translate if the language is changed without restarting the program, which is undesirable. Instead we can just turn the map into a plain old function that maps the values to their equivalent strings. This is also lessens the memory allocated, since it's only allocating memory for the strings themselves, and not an encompassing map as well.
2018-10-24yuzu/main: Notify user of loading errors with Amiibo dataLioncash3-17/+40
We shouldn't silently continue if loading failed, since the general assumption is that no messages showing up implicitly indicates success.
2018-10-24configure_system: Clear current username before overwritingZach Hilman2-5/+15
Prevents bug where old username would remain if the new username was shorter in length.
2018-10-24game_list: Use QFileInfo instead of common's file functionsLioncash1-4/+3
We can just use the facilities that Qt provides instead of pulling in stuff from common. While we're at it, we can also simplify the nearby logging statement's argument by just calling .toStdString()
2018-10-24game_list: Make game list column headers translatableLioncash1-5/+5
These are user-facing strings, so they should be marked as translatable
2018-10-24bootmanager: Use QStringLiteral instead of std::string to represent the window titleLioncash1-4/+2
This gets rid of an unnecessary type conversion. We can just use the regular QStringLiteral to already format the string as the type setWindowTitle accepts instead of converting from a std::string instance.
2018-10-24time_stretch: Remove unused m_channel_count member variableLioncash2-3/+1
This is only stored to, but never read from.
2018-10-24npad: Remove unused controller variable from OnInit()Lioncash1-2/+3
This also gets rid of variable shadowing related to the lambda parameter a little bit below this code as well.
2018-10-24perf_stats: Remove unused variable within DoFrameLimiting()Lioncash1-4/+0
This hasn't been used since ba8ff096fdc9f7ab101851c4cd06c3244a7d84c3
2018-10-24yuzu/configuration/config: Use a std::unique_ptr for qt_config instead of a raw pointerLioncash2-8/+8
Same behavior, less code.
2018-10-24aoc_u: Make use of previously-unused CheckAOCTitleIDMatchesBase() functionLioncash1-3/+3
We can just call the function instead of duplicating the code here. This also prevents an unused function warning. We also don't need to take the lambda capture by reference. It's just a u64 value, so by value is fine here.
2018-10-24vfs: Handle failure of file reading within VfsRawCopy()Lioncash1-2/+6
Also gets rid of an unused variable.
2018-10-24key_manager: Remove unused variable in DeriveBase()Lioncash1-1/+0
2018-10-24decoders: Remove unused variable within SwizzledData()Lioncash1-1/+0
2018-10-24maxwell_3d: Remove unused variable within ProcessQueryGet()Lioncash1-1/+0
2018-10-24logging/backend: Add missing services to the log filtersLioncash2-0/+5
Just a few overlooked services.
2018-10-24yuzu/configuration/config: Reorganize member variable and function layoutLioncash1-6/+7
Makes the class layout consistent with the others.
2018-10-24profile_manager: Create save data if it doesn't exist on useZach Hilman4-18/+42
2018-10-24acc: Fix account UUID duplication errorZach Hilman8-80/+106
2018-10-24configure_system: Clear selection after user deleteZach Hilman2-12/+18
2018-10-24profile_manager: Load user icons, names, and UUIDs from system saveZach Hilman11-133/+308
2018-10-24acc: Load user images from config dirZach Hilman1-9/+45
2018-10-24qt: Allow user to select emu user on open save dataZach Hilman1-3/+24
2018-10-24qt: Add Profile Manager UI to system settingsZach Hilman3-76/+350
2018-10-24am: Pass current user UUID to launch parametersZach Hilman1-7/+9
2018-10-24profile_manager: Load users from emulator settingsZach Hilman2-5/+7
2018-10-24settings: Add users and current_user settings and remove usernameZach Hilman3-6/+54
2018-10-24Added Amiibo support (#1390)David12-80/+386
* Fixed conflict with nfp * Few fixups for nfc * Conflict 2 * Fixed AttachAvailabilityChangeEvent * Conflict 3 * Fixed byte padding * Refactored amiibo to not reside in "System" * Removed remaining references of nfc from system * used enum for Nfc GetStateOld * Added missing newline * Moved file operations to front end * Conflict 4 * Amiibos now use structs and added mutexes * Removed amiibo_path
2018-10-23Implement PointSizeFernandoS273-5/+28
2018-10-23Fixed Layered Textures Loading and CubemapsFernandoS273-72/+109
2018-10-23common: Remove memory_util.cpp/.hLioncash3-200/+0
Everything from here is completely unused and also written with the notion of supporting 32-bit architecture variants in mind. Given the Switch itself is on a 64-bit architecture, we won't be supporting 32-bit architectures. If we need specific allocation functions in the future, it's likely more worthwhile to new functions for that purpose.
2018-10-23only redefine 64 bit file operation for MSVCWeiyi Wang1-5/+8
MinGW provides POSIX functions
2018-10-23Added assertion failed, reworked logging levelsDavid Marcec1-16/+24
2018-10-23gl_shader_decompiler: Implement VSETPReinUsesLisp2-0/+26
2018-10-23gl_shader_decompiler: Abstract VMAD into a video subsetReinUsesLisp2-75/+82
2018-10-23Added break types to svcBreakDavid Marcec1-4/+42
There seems to be more such as type 1, and 2. Unsure what these currently are but when a game hits them we can investigate and add the rest
2018-10-23Added Saturation to FMUL32IFernandoS272-3/+8
2018-10-22Assert that multiple render targets are not set while alpha testingFernandoS273-3/+17
2018-10-22Use standard UBO and fix/stylize the codeFernandoS278-91/+51
2018-10-22Cache uniform locations and restructure the implementationFernandoS273-33/+29
2018-10-22Remove SyncAlphaTest and clang formatFernandoS274-8/+9
2018-10-22Added Alpha FuncFernandoS272-3/+43
2018-10-22Implemented Alpha TestingFernandoS276-3/+59
2018-10-22Fixed FSETP and FSETFernandoS272-30/+12
2018-10-22Fixed VAOs Float types only returning GL_FLOAT in cases that they had to return GL_HALF_FLOATFernandoS271-2/+14
2018-10-22psm: Stub GetChargerTypeZach Hilman2-24/+27
Used by LovePotion Lua Homebrew. Stubbed as connected to official Nintendo Switch dock.
2018-10-21service: Add the basic skeleton for the NPNS servicesLioncash4-2/+109
2018-10-21hid: Update service function table for hidbusLioncash1-0/+1
Updated based off information provided by Switchbrew.
2018-10-21am: Add the basic skeleton for the tcap serviceLioncash4-0/+44
Added based off information provided by Switchbrew.
2018-10-21am: Update service function tablesLioncash4-15/+60
Updated based off information from Switchbrew
2018-10-21prepo: Update service function table.Lioncash1-8/+13
Also introduces the new prepo:a2 service. Updated based off information provided by Switchbrew.
2018-10-21lbl: Update service function table namesLioncash1-28/+28
Updated based off information provided by Switchbrew.
2018-10-21qt: Move Reinitialize Keys to Tools menuZach Hilman1-1/+7
2018-10-21psm: Stub GetBatteryChargePercentageZach Hilman2-1/+14
Used by LovePotion Lua Homebrew. Stubbed to return 100% charge.
2018-10-21service: Add skeleton for psm serviceZach Hilman5-0/+75
Seems to be the power controller. Listed in switchbrew under the category PTM services.
2018-10-20CMakeLists: Use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIRLioncash2-5/+5
This is more localized to what we want to enforce directory-wise with the project. CMAKE_SOURCE_DIR indicates the root of the source tree, but this would cause the wrong behavior if someone included yuzu as part of a larger buildsystem (for whatever reason). Instead, we want to use the directory where the "project(yuzu)" command was declared as the root path reference.
2018-10-20CMakeLists: Use target_compile_definitions instead of add_definitions to define YUZU_ENABLE_COMPATIBILITY_REPORTINGLioncash1-1/+1
Keeps the definition constrained to the yuzu target and prevents polluting anything else in the same directory (should that ever happen). It also keeps it consistent with how the USE_DISCORD_PRESENCE definition is introduced below it.
2018-10-20web_service/CMakeLists: Make the CPPHTTPLIB_OPENSSL_SUPPORT constrained to the web_service library onlyLioncash1-1/+1
Given we link in httplib privately, we can also make the definition enabling OpenSSL support private as well. Prevents leaking a definition into other libraries that link with this one, like the core library.
2018-10-20kernel/process: Make the handle table per-processLioncash9-100/+97
In the kernel, there isn't a singular handle table that everything gets tossed into or used, rather, each process gets its own handle table that it uses. This currently isn't an issue for us, since we only execute one process at the moment, but we may as well get this out of the way so it's not a headache later on.
2018-10-20engines/maxwell_*: Use nested namespace specifiers where applicableLioncash3-12/+6
These three source files are the only ones within the engines directory that don't use nested namespaces. We may as well change these over to keep things consistent.
2018-10-20maxwell_dma: Make variables const where applicable within HandleCopy()Lioncash1-3/+3
These are never modified, so we can make that assumption explicit.
2018-10-20maxwell_dma: Make FlushAndInvalidate's size parameter a u64Lioncash1-1/+1
This prevents truncation warnings at the lambda's usage sites.
2018-10-20maxwell_dma: Remove unused variables in HandleCopy()Lioncash1-3/+0
These pointer variables are never used, so we can get rid of them.
2018-10-20svc: Fix vma boundary check in svcQueryMemoryLioncash1-1/+1
This should be comparing against the queried process' vma_map, not the current process'. The only reason this hasn't become an issue yet is we currently only handle one process being active at any time.
2018-10-20gl_shader_decompiler: Allow std::move to function in SetPredicateLioncash1-1/+1
If the variable being moved is const, then std::move will always perform a copy (since it can't actually move the data).
2018-10-20gl_shader_decompiler: Get rid of variable shadowing warningsLioncash1-2/+2
A variable with the same name was previously declared in an outer scope.
2018-10-20gl_shader_decompiler: Fix a few comment typosLioncash1-3/+4
2018-10-20gl_shader_decompiler: Move position varying declaration back to gl_shader_genReinUsesLisp3-13/+9
The intention of declaring them in gl_shader_decompiler was to be able to use blocks to implement geometry shaders. But that wasn't needed in the end and it caused issues when both vertex stages were being used, resulting in a redeclaration of "position".
2018-10-20Added auto controller switching to supported controllers and single joycon button rotationDavid Marcec2-4/+189
This is a subset of the better-hid-2 changes, this fixes input in various games which don't support dual joycons. This pr will search for the next best controller which is supported by the current game
2018-10-20aoc_u: Stub GetAddOnContentListChangedEventZach Hilman2-1/+16
This event signals the game when new DLC is purchased from the eShop while the game is running. Since, for the forseeable future, yuzu will not have this ability, it seems safe to stub with a dummy event that will never fire. This is needed to boot Sonic Mania Plus (update v1.04).
2018-10-20crypto: Use compressed sizes in offset calculation for KIP decompressionZach Hilman1-1/+2
Fixes a fatal crash on start when deriving keys.
2018-10-19vfs: Remove InterpretAsDirectory and related functionsZach Hilman17-95/+1
When writing VFS, it initally seemed useful to include a function to in-place convert container files into directories in one homogenous directory structure, but re-evaluating it now there have been plenty of chances to use it and there has always been a better way. Removing as it is unused and likely will not be used.
2018-10-19Stubbed home blockingDavid Marcec2-4/+36
Needed by arms due to new hid rework
2018-10-19es: Update service function tablesLioncash1-7/+11
Updated based off information provided by Switchbrew.
2018-10-19audio: Update service function tablesLioncash1-17/+20
Updated based off information provided by Switchbrew.
2018-10-19omm: Update service function tablesLioncash1-16/+18
Updated based off information provided by Switchbrew.
2018-10-19nifm: Update service function tablesLioncash1-0/+1
Updated based off information provided by switchbrew.
2018-10-19hid: Update service function tablesLioncash1-6/+45
Updated based off information provided by Switchbrew.
2018-10-19nim: Add the basic skeleton of the nim:eca serviceLioncash1-0/+17
Added based off information provided by Switchbrew
2018-10-19ns: Update service function tableLioncash1-6/+49
Updated based off information provided by Switchbrew.
2018-10-19set_cal: Update service function tableLioncash1-1/+2
Updated based on information from Switchbrew.
2018-10-19GPU: Improved implementation of maxwell DMA (Subv).bunnei3-17/+66
2018-10-19decoders: Introduce functions for un/swizzling subrects.bunnei2-0/+49
2018-10-19GPU: Invalidate destination address of kepler_memory writes.bunnei3-3/+17
2018-10-19fermi_2d: Add support for more accurate surface copies.bunnei2-3/+12
2018-10-18svc: Check for word alignment of addresses within svcArbitrateLock/svcArbitrateUnlockLioncash1-0/+8
The kernel itself checks whether or not the provided addresses are word aligned before continuing, so we should be doing the same.
2018-10-18common: Add function for checking word alignment to alignment.hLioncash1-0/+6
This will be used in a following change to svcArbitrateLock() and svcArbitrateUnlock()
2018-10-18common: Move Is4KBAligned() to alignment.hLioncash2-9/+13
Aligning on 4KB pages isn't a Switch-specific thing, so this can be moved to common so it can be used with other things as well.
2018-10-18core: Remove unnecessary assert in ArmInterface()Lioncash1-2/+1
CpuCore already does this sort of checking, so we can just call that instead of duplicating the assertions.
2018-10-18Used better names for mm:u and fixed bad stubDavid Marcec1-8/+42
InitializeWithId needs to return an id which is a u32 which should be a non zero value
2018-10-18svc: Add missing sanitizing checks for MapSharedMemory/UnmapSharedMemoryLioncash3-3/+50
Now that the changes clarifying the address spaces has been merged, we can wrap the checks that the kernel performs when mapping shared memory (and other forms of memory) into its own helper function and then use those within MapSharedMemory and UnmapSharedMemory to complete the sanitizing checks that are supposed to be done.
2018-10-18hid/controller: Remove unused header inclusionsLioncash9-9/+0
swap.h only needs to be present in the header for the type aliases and definitions, it's not actually needed in the cpp files though. input.h is just unused entirely in xpad.h
2018-10-18hid/controller/npad: Remove unused dump_idx member variableLioncash1-1/+0
Given it's unused, we may as well toss it.
2018-10-18hid/controller/npad: Remove unnecessary semicolon from the closing brace of LedPattern's constructorLioncash1-1/+1
2018-10-18hid/controller/npad: Remove #pragma once from the cpp fileLioncash1-2/+0
This is only useful in headers.
2018-10-18hid/controller/npad: Move npad_id_list into the cpp fileLioncash2-2/+10
This is just a lookup table, and since it's private, there's nothing really stateful about it, so we can just move it into the cpp file.
2018-10-18hid/controller/npad: Remove unnecessary const from void return typeLioncash2-2/+2
This literally does nothing.
2018-10-18hid/controller: Default the destructors of all controller types in the cpp fileLioncash16-0/+16
These classes are non-trivial and are definitely going to be changed in the future, so we default these to prevent issues with forward declarations, and to keep the compiler from inlining tear-down code.
2018-10-18controller_base: Default the base class constructor and destructor in the cpp fileLioncash2-2/+4
The destructor doesn't need to be a pure-virtual function.
2018-10-18gl_shader_decompiler: Implement PBK and BRKReinUsesLisp2-22/+43
2018-10-18Clang format and other fixesFernandoS271-16/+0
2018-10-18Implement Reinterpret Surface, to accurately blit 3D texturesFernandoS271-2/+4
2018-10-18Implement GetInRange in the Rasterizer CacheFernandoS271-0/+16
2018-10-18Implement 3D TexturesFernandoS274-1/+10
2018-10-18qt: Add support for dumping a DLC Data RomFSZach Hilman4-11/+73
2018-10-18gl_rasterizer_cache: Remove unnecessary block_depth=1 on Flush.bunnei1-1/+0
2018-10-18gl_rasterizer_cache: Remove unnecessary temporary buffer with unswizzle.bunnei1-5/+2
2018-10-17registered_cache: Deduplicate results of ListEntry and ListEntryFilterZach Hilman2-2/+16
Prevents a Entry from appearing in the list twice if the user has it installed in two places (e.g. User NAND and SDMC)
2018-10-17Using dual joycons as the default controllerDavid Marcec3-77/+59
Reason for the change is to allow both docked and undocked mode to work
2018-10-17fsp_srv: Apply patches to Data storage in OpenDataStorageByDataIdZach Hilman1-1/+5
2018-10-17patch_manager: Add support for using LayeredFS with DataZach Hilman1-2/+3
2018-10-16gl_rasterizer_cache: Use AccurateCopySurface for use_accurate_gpu_emulation.bunnei2-2/+18
2018-10-16config: Rename use_accurate_framebuffers -> use_accurate_gpu_emulation.bunnei10-20/+20
- This will be used as a catch-all for slow-but-accurate GPU emulation paths.
2018-10-16rasterizer_cache: Refactor to support in-order flushing.bunnei6-63/+116
2018-10-16content_archive: Simpify assignment of bktr_base_romfs in the constructorLioncash1-2/+1
std::move doesn't actually dereference the data, so it doesn't matter whether or not the type is null.
2018-10-16content_archive: Make IsValidNCA() an internally linked functionLioncash2-3/+1
This is only ever used within the cpp file, so it can just be an internal function.
2018-10-16content_archive: Simplify rights ID checkLioncash1-2/+2
This is the same as using std::any_of with an inverted predicate.
2018-10-16content_archive: Split loading into separate functionsLioncash2-253/+290
The constructor alone is pretty large, the reading code should be split into its consistuent parts to make it easier to understand it without having to build a mental model of a 300+ line function.
2018-10-16content_archive: Pass and take NCASectionHeader instance by referenceLioncash2-3/+3
Each header is 512 bytes in size, which is kind of an excessive amount to copy all the time when it's possible to avoid doing so.
2018-10-16XCI: Add function for checking the existence of the program NCALioncash3-7/+8
The only reason the getter existed was to check whether or not the program NCA was null. Instead, we can just provide a function to query for the existence of it, instead of exposing it entirely.
2018-10-16gl_rasterizer_cache: Refactor to only call GetRegionEnd on surface creation.bunnei2-16/+23
2018-10-16gl_rasterizer_cache: Only flush when use_accurate_framebuffers is enabled.bunnei2-2/+13
2018-10-16gl_rasterizer_cache: Separate guest and host surface size managment.bunnei2-92/+94
2018-10-16gl_rasterizer_cache: Rename GetGLBytesPerPixel to GetBytesPerPixel.bunnei2-17/+18
- This does not really have anything to do with OpenGL.
2018-10-16gl_rasterizer_cache: Remove unused FlushSurface method.bunnei2-7/+0
2018-10-16gl_rasterizer: Implement flushing.bunnei1-1/+25
2018-10-16gl_rasterizer_cache: Remove usage of Memory::Read/Write functions.bunnei1-13/+8
- These cannot be used within the cache, as they change cache state.
2018-10-16gl_rasterizer_cache: Clamp cached surface size to mapped GPU region size.bunnei2-19/+37
2018-10-16memory_manager: Add a method for querying the end of a mapped GPU region.bunnei2-0/+11
2018-10-16rasterizer_cache: Reintroduce method for flushing.bunnei3-0/+23
2018-10-16gl_rasterizer_cache: Reintroduce code for handling swizzle and flush to guest RAM.bunnei2-28/+119
2018-10-16Implement VI ConvertScalingMode (#1475)David1-1/+49
* Implement VI ConvertScalingMode * Fixed push enum * Scale mode now uses Nintendo scale mode as an enum as well
2018-10-16savedata_factory: Add TemporaryStorage SaveDataSpaceIdZach Hilman1-1/+4
Required for TemporaryStorage saves (in addition to SaveDataType)
2018-10-16savedata_factory: Add support for DeviceSaveDataZach Hilman1-0/+8
Uses the same path as SaveData except with UID 0. Adds a warning if UID is not 0.
2018-10-16file_sys/registered_cache: Use unique_ptr and regular pointers instead of shared_ptrs where applicableLioncash12-51/+53
The data retrieved in these cases are ultimately chiefly owned by either the RegisteredCache instance itself, or the filesystem factories. Both these should live throughout the use of their contained data. If they don't, it should be considered an interface/design issue, and using shared_ptr instances here would mask that, as the data would always be prolonged after the main owner's lifetime ended. This makes the lifetime of the data explicit and makes it harder to accidentally create cyclic references. It also makes the interface slightly more flexible than the previous API, as a shared_ptr can be created from a unique_ptr, but not the other way around, so this allows for that use-case if it ever becomes necessary in some form.
2018-10-16file_sys/control_metadata: Get rid of magic constantsLioncash1-3/+6
These are just the size of the data being passed in, so we can specify that via the size() member function.
2018-10-15nso: Return an optional address from LoadModuleLioncash5-16/+29
If a malformed NSO is attempted to be loaded, we shouldn't continue onwards. We should be reporting an error and bailing out.
2018-10-15shader_bytecode: Add Control Code enum 0xfReinUsesLisp1-1/+1
Control Code 0xf means to unconditionally execute the instruction. This value is passed to most BRA, EXIT and SYNC instructions (among others) but this may not always be the case.
2018-10-15gl_shader_decompiler: Fixup style inconsistenciesReinUsesLisp1-5/+3
2018-10-15gl_rasterizer: Silence implicit cast warning in glBindBufferRangeReinUsesLisp1-1/+2
2018-10-15core_cpu: Make Cpu scheduler instances unique_ptrs instead of shared_ptrsLioncash10-31/+50
2018-10-15core: Make the live Cpu instances unique_ptrs instead of shared_ptrsLioncash1-9/+9
There's no need for shared ownership here, as the only owning class instance of those Cpu instances is the System class itself. We can also make the thread_to_cpu map use regular pointers instead of shared_ptrs, given that the Cpu instances will always outlive the cases where they're used with that map.
2018-10-15core: Make the exclusive monitor a unique_ptr instead of a shared_ptrLioncash5-15/+13
Like the barrier, this is owned entirely by the System and will always outlive the encompassing state, so shared ownership semantics aren't necessary here.
2018-10-15core: Make CPUBarrier a unique_ptr instead of a shared_ptrLioncash3-11/+10
This will always outlive the Cpu instances, since it's destroyed after we destroy the Cpu instances on shutdown, so there's no need for shared ownership semantics here.
2018-10-15gl_shader_decompiler: Implement HSET2_RReinUsesLisp2-0/+62
2018-10-15gl_shader_decompiler: Implement HSETP2_RReinUsesLisp2-0/+65
2018-10-15gl_shader_decompiler: Implement HFMA2 instructionsReinUsesLisp2-0/+85
2018-10-15gl_shader_decompiler: Implement HADD2_IMM and HMUL2_IMMReinUsesLisp2-0/+73
2018-10-15gl_shader_decompiler: Implement non-immediate HADD2 and HMUL2 instructionsReinUsesLisp2-0/+75
2018-10-15gl_shader_decompiler: Setup base for half float unpacking and settingReinUsesLisp2-0/+98
2018-10-15crypto: Various crypto fixes for quickstart guideZach Hilman2-4/+8
2018-10-15nso: Make LoadModule take a VfsFile by const referenceLioncash3-11/+9
2018-10-15nro: Make LoadNro take a VfsFile by const referenceLioncash2-6/+6
This function doesn't need to care about ownership semantics, so we can just pass it a reference to the file itself, rather than a std::shared_ptr alias.
2018-10-15svc: Clarify enum values for AddressSpaceBaseAddr and AddressSpaceSize in svcGetInfo()Lioncash4-28/+44
So, one thing that's puzzled me is why the kernel seemed to *not* use the direct code address ranges in some cases for some service functions. For example, in svcMapMemory, the full address space width is compared against for validity, but for svcMapSharedMemory, it compares against 0xFFE00000, 0xFF8000000, and 0x7FF8000000 as upper bounds, and uses either 0x200000 or 0x8000000 as the lower-bounds as the beginning of the compared range. Coincidentally, these exact same values are also used in svcGetInfo, and also when initializing the user address space, so this is actually retrieving the ASLR extents, not the extents of the address space in general.
2018-10-15aoc: Read DLC base title ID from RegisteredCacheZach Hilman3-2/+18
Falls back to title ID + 0x1000, which is what HOS does.
2018-10-14Implement Arrays on Tex InstructionFernandoS271-14/+55
2018-10-14Stop all threads on svcBreakDavid Marcec1-0/+6
This should help diagnose crashes easier and prevent many users thinking that a game is still running when in fact it's just an audio thread still running(this is typically not killed when svcBreak is hit since the game expects us to do this)
2018-10-14aoc: Return size in ListAddOnContentZach Hilman1-1/+2
2018-10-14Fix TLDSFernandoS271-1/+5
2018-10-14Shorten the implementation of 3D swizzle to only 3 functionsFernandoS271-70/+27
2018-10-13svc: Implement svcGetProcessInfoLioncash3-4/+50
A fairly basic service function, which only appears to currently support retrieving the process state. This also alters the ProcessStatus enum to contain all of the values that a kernel process seems to be able of reporting with regards to state.
2018-10-13Fix a Crash on Zelda BotW and Splatoon 2, and simplified LoadGLBufferFernandoS272-19/+2
2018-10-13Propagate depth and depth_block on modules using decodersFernandoS278-54/+67
2018-10-13Remove old Swizzle algorithms and use 3d SwizzleFernandoS271-93/+69
2018-10-13Implement Precise 3D SwizzleFernandoS271-3/+71
2018-10-13Implement Fast 3D SwizzleFernandoS271-2/+74
2018-10-13filesystem: Make CreateFactories() and InstallInterface() take a VfsFilesystem instance by referenceLioncash7-20/+19
Neither of these functions alter the ownership of the provided pointer, so we can simply make the parameters a reference rather than a direct shared pointer alias. This way we also disallow passing incorrect memory values like nullptr.
2018-10-13yuzu/main: Simplify OnMenuLoadFile()Lioncash1-14/+12
We can utilize QStringList's join() function to perform all of the appending in a single function call. While we're at it, make the extension list a single translatable string and add a disambiguation comment to explain to translators what %1 actually is.
2018-10-13yuzu/main: Apply the [[maybe_unused]] attribute to the parameter of SetDiscordEnabled()Lioncash1-1/+1
Depending on whether or not USE_DISCORD_PRESENCE is defined, the "state" parameter can be used or unused. If USE_DISCORD_PRESENCE is not defined, the parameter will be considered unused, which can lead to compiler warnings. So, we can explicitly mark it with [[maybe_unused]] to inform the compiler that this is intentional.
2018-10-13Added ASTC 5x4; 8x5Hexagon123-6/+32
2018-10-13partition_data_manager: Reserve and insert data within output vector in DecryptPackage2()Lioncash1-20/+16
We can just reserve the memory then perform successive insertions instead of needing to use memcpy. This also avoids the need to zero out the output vector's memory before performing the insertions. We can also std::move the output std::vector into the destination so that we don't need to make a completely new copy of the vector, getting rid of an unnecessary allocation. Additionally, we can use iterators to determine the beginning and end ranges of the std::vector instances that comprise the output vector, as the end of one range just becomes the beginning for the next successive range, and since std::vector's iterator constructor copies data within the range [begin, end), this is more straightforward and gets rid of the need to have an offset variable that keeps getting incremented to determine where to do the next std::memcpy.
2018-10-13partition_data_manager: Remove unused std::map instance within DecryptPackage2()Lioncash1-2/+0
Aside from emplacing elements into the map, the map itself is never actually queried for contained data.
2018-10-13partition_data_manager: Take package2_keys by const referenceLioncash2-2/+3
These are only ever read from, so we don't need to make a copy of all the keys here.
2018-10-13partition_data_manager: Move IV data to where it's needed in DecryptPackage2()Lioncash1-3/+1
Given it's only used in one spot and has a fairly generic name, we can just specify it directly in the function call. This also the benefit of automatically moving it.
2018-10-13partition_data_manager: Remove commented out codeLioncash1-2/+0
Commented out code shouldn't be left in without a reason indicating why in a comment.
2018-10-13key_manager/partition_data_manager: Silence truncation compiler warningsLioncash4-10/+15
2018-10-13partition_data_manager: Dehardcode array boundsLioncash2-7/+12
Instead, we can make it part of the type and make named variables for them, so they only require one definition (and if they ever change for whatever reason, they only need to be changed in one spot).
2018-10-13partition_data_manager: Take VirtualFile by const reference in constructorLioncash2-2/+2
Given the VirtualFile instance isn't stored into the class as a data member, or written to, this can just be turned into a const reference, as the constructor doesn't need to make a copy of it.
2018-10-13partition_data_manager: Amend constructor initializer list orderLioncash1-2/+3
Orders the members in the exact order they would be initialized. This also prevents compiler warnings about this sort of thing.
2018-10-13partition_data_manager: Remove unused includesLioncash2-4/+1
Gets unused includes out of the headers and moves them into the cpp file if they're used there instead.
2018-10-13key_manager: Use std::vector's insert() instead of std::copy with a back_inserterLioncash1-2/+2
If the data is unconditionally being appended to the back of a std::vector, we can just directly insert it there without the need to insert all of the elements one-by-one with a std::back_inserter.
2018-10-13key_manager: Brace long conditional bodyLioncash1-1/+2
If a conditional (or it's body) travels more than one line, it should be braced.
2018-10-13key_manager: Don't assume file seeks and reads will always succeedLioncash1-7/+17
Given the filesystem should always be assumed to be volatile, we should check and bail out if a seek operation isn't successful. This'll prevent potentially writing/returning garbage data from the function in rare cases. This also allows removing a check to see if an offset is within the bounds of a file before perfoming a seek operation. If a seek is attempted beyond the end of a file, it will fail, so this essentially combines two checks into one in one place.
2018-10-13key_manager: Remove unnecessary seek in DeriveSDSeed()Lioncash1-1/+0
Given the file is opened a few lines above and no operations are done, other than check if the file is in a valid state, the read/write pointer will always be at the beginning of the file.
2018-10-13patch_manager: Move non-Program RomFS patch log to DebugZach Hilman1-2/+8
Normal Program-type patches will still be logged to aid in debugging, but for others (mainly Control), it was moved to Debug.
2018-10-13content_archive: Move get key log to Trace levelZach Hilman1-1/+1
Avoids printing live keys in the general log.
2018-10-12Implemented helper function to correctly calculate a texture's sizeFernandoS272-0/+22
2018-10-12kernel/process: Make CodeSet a regular non-inherited objectLioncash7-83/+45
These only exist to ferry data into a Process instance and end up going out of scope quite early. Because of this, we can just make it a plain struct for holding things and just std::move it into the relevant function. There's no need to make this inherit from the kernel's Object type.
2018-10-12thread: Remove unnecessary memset from ResetThreadContext()Lioncash1-4/+1
Regular value initialization is adequate here for zeroing out data. It also has the benefit of not invoking undefined behavior if a non-trivial type is ever added to the struct for whatever reason.
2018-10-12Returned an error before processing other remapsDavid Marcec1-6/+2
2018-10-12Made the minimum alignment more clearDavid Marcec1-2/+3
2018-10-12svc: Fix typos in sanitizing checks for MapMemory/UnmapMemoryLioncash1-3/+3
2018-10-12WipDavid Marcec2-3/+23
2018-10-11Dynamically decide handheld variant based on supported npad id priorityDavid Marcec3-19/+62
Kirby input still doesn't work, should fix a lot of other games
2018-10-11Added error codes for nvmapDavid Marcec1-12/+59
2018-10-11Passing an invalid nmap handle to Remap should throw an errorDavid Marcec1-3/+14
Added error for invalid nmap handles
2018-10-11gl_shader_decompiler: Implement VMADReinUsesLisp2-0/+118
2018-10-11nvhost_as_gpu: Flush CPU VAddr on UnmapBuffer.bunnei1-3/+4
2018-10-11core/CMakeLists: Make all web_service-related libraries privateLioncash1-1/+1
Now that all external dependencies are hidden, we can remove json-headers from the publically linked libraries, as the use of this library is now completely hidden from external users of the web_service library. We can also make the web_services library private as well, considering it's not a requirement. If a library needs to link in web_service, it should be done explicitly -- not via indirect linking.
2018-10-11web_backend: Make Client use the PImpl idiomLioncash5-142/+154
Like with TelemetryJson, we can make the implementation details private and avoid the need to expose httplib to external libraries that need to use the Client class.
2018-10-11HwOpus, Implemented DecodeInterleavedWithPerformanceDavid Marcec1-3/+34
Used by sonic ages
2018-10-11telemetry_json: Use the PImpl idiom to avoid unnecessary dependency exposureLioncash2-49/+55
Users of the web_service library shouldn't need to care about an external library like json.h. However, given it's exposed in our interface, this requires that other libraries publicly link in the JSON library. We can do better. By using the PImpl idiom, we can hide this dependency in the cpp file and remove the need to link that library in altogether.
2018-10-11telemetry_json: Add missing override specifier to the destructor of TelemetryJsonLioncash1-1/+1
2018-10-11telemetry_json: Take std::string parameters by valueLioncash2-3/+2
Taking them by const reference isn't advisable here, because it means the std::move calls were doing nothing and we were always copying the std::string instances.
2018-10-11telemetry_json: Remove unnecessary includesLioncash2-3/+1
Removes unused includes. Also rectifies a missing <chrono> include.
2018-10-11core/CMakeLists: Use target_compile_definitions instead of add_definitions for specifying ENABLE_WEB_SERVICELioncash1-1/+1
Avoids introducing the definition to the whole directory space and localizes it to being added to the library that needs it.
2018-10-11svc: Add missing address range sanitizing checks to MapMemory/UnmapMemoryLioncash2-12/+81
This adds the missing address range checking that the service functions do before attempting to map or unmap memory. Given that both service functions perform the same set of checks in the same order, we can wrap these into a function and just call it from both functions, which deduplicates a little bit of code.
2018-10-10Added BeginPermitVibrationSession and EndPermitVibrationSessionDavid Marcec3-2/+26
Used by Mario Party
2018-10-10Added GetLedPattern and HandheldVariantDavid Marcec3-6/+63
HandheldVariant is for specific games which expect handheld controllers to be at position 8(kirby), however this doesn't fix all games as some games require handhelds to be at position 0(snipperclips)
2018-10-10kernel/thread: Use a regular pointer for the owner/current processLioncash10-39/+41
There's no real need to use a shared pointer in these cases, and only makes object management more fragile in terms of how easy it would be to introduce cycles. Instead, just do the simple thing of using a regular pointer. Much of this is just a hold-over from citra anyways. It also doesn't make sense from a behavioral point of view for a process' thread to prolong the lifetime of the process itself (the process is supposed to own the thread, not the other way around).
2018-10-10Kirby expects handheld controllers to be at position 8David Marcec1-2/+8
2018-10-10Add memory Layout to Render Targets and Depth BuffersFernandoS273-21/+33
2018-10-10Added the ability to "disconnect" individual npadsDavid Marcec3-16/+40
Fixes arms
2018-10-10Removed unneeded forward declarationsDavid Marcec2-13/+2
2018-10-10Addressed changes for better hidDavid Marcec19-167/+238
2018-10-10"Better Hid" rework part 1David Marcec22-644/+1500
2018-10-10Changed all casts in svc_wrap.h to be static_cast insteadDavid Marcec1-25/+28
2018-10-10Use a better name than "dont_kill_application"David Marcec1-2/+2
signal_debugger seems like a more fitting name
2018-10-10Fixed incorrect types for svcBreakDavid Marcec2-3/+8
svcBreak reason should be a u32, not a u64.
2018-10-10Fixed block height settings for RenderTargets and Depth Buffers, and added block width and block depthFernandoS275-12/+63
2018-10-09gl_shader_decompiler: Remove unused variables in TMML's implementationLioncash1-7/+3
Given "y" isn't always used, but "x" is, we can rearrange this to avoid unused variable warnings by changing the names of op_a and op_b
2018-10-09telemetry_session: Remove doxygen comment for a non-existent parameterLioncash1-1/+0
There's no "func" parameter, so this can just be removed.
2018-10-09telemetry_session: Add missing includesLioncash2-2/+5
Prevents potential compilation issues in the future by including missing headers for certain functions and types.
2018-10-09telemetry_session: Remove unimplemented FinalizeAsyncJob prototypeLioncash1-2/+0
This isn't implemented anywhere, so it can just be removed.
2018-10-09telemetry_session: Use a std::array in GenerateTelemetryId()Lioncash1-2/+4
We don't need to potentially heap-allocate a std::string instance here, given the data is known ahead of time. We can just place it within an array and pass this to the mbedtls functions.
2018-10-09patch_manager: Return a std::unique_ptr from ParseControlNCA() and GetControlMetadata() instead of a std::shared_ptrLioncash7-21/+18
Neither of these functions require the use of shared ownership of the returned pointer. This makes it more difficult to create reference cycles with, and makes the interface more generic, as std::shared_ptr instances can be created from a std::unique_ptr, but the vice-versa isn't possible. This also alters relevant functions to take NCA arguments by const reference rather than a const reference to a std::shared_ptr. These functions don't alter the ownership of the memory used by the NCA instance, so we can make the interface more generic by not assuming anything about the type of smart pointer the NCA is contained within and make it the caller's responsibility to ensure the supplied NCA is valid.
2018-10-09implemented touch in Qt and SDLNeatNit4-10/+131
change TouchToPixelPos to return std::pair<int, int> static_cast (SDL) various minor style and code improvements style - PascalCase for function names made touch events private const pointer arg in touch events make TouchToPixelPos a const member function did I do this right? braces on barely-multiline if remove question comment (confirmed in Discord) fixed consts remove unused parameter from TouchEndEvent DRY - High-DPI scaled touch put in separate function also fixes a bug where if you start touching (with either mouse or touchscreen) and drag the mouse to the LEFT of the emulator window, the touch point jumps to the RIGHT side of the touchscreen; draggin to above the window would make it jump to the bottom. implicit conversion from QPoint to QPointF, apparently I have no idea what const even means but I'll put it here anyway remove unused or used-once variables make touch scaling functions const, and put their implementations together removed unused FingerID parameters QTouchEvent forward declaration; add comment to TouchBegin that was lost in an edit better DRY in SDL To do -> TODO(NeatNit) remove unused include
2018-10-09ips_layer: Avoid constructing std::vector instances where not necessaryLioncash1-6/+25
We can just compare the existing std::vector instance with a constexpr std::array containing the desired match. This is lighter resource-wise, as we don't need to allocate on the heap.
2018-10-09ips_layer: Remove unnecessary explicit std::pair constructor in std::arrayLioncash1-5/+13
Makes the layout of the array consistent, by making all elements match, instead of special-casing the first one.
2018-10-09ips_layer: Add missing includesLioncash2-7/+17
Adds missing includes to prevent potential compilation issues in the future. Also moves the definition of a struct into the cpp file, so that some includes don't need to be introduced within the header.
2018-10-09ips_layer: std::move data within PatchIPS() and Apply()Lioncash1-2/+5
We don't need to make a copy of the read data, so we can std::move it into the make_shared call here.
2018-10-09ips_layer: Silence truncation and conversion warningsLioncash1-3/+3
Makes type conversions explicit to avoid compiler warnings.
2018-10-09Implement Scissor TestFernandoS271-4/+9
2018-10-09Added bitfield instead of manually checking if the bit is setDavid Marcec1-4/+12
2018-10-09Assert Scissor testsFernandoS273-1/+31
2018-10-09EffectOutStatus padding is now in hexDavid Marcec1-1/+1
2018-10-09Actual kill execution when the bit isn't set, not the other way aroundDavid Marcec1-1/+1
2018-10-09svcBreak, Signalling to the debugger should not kill executionDavid Marcec1-5/+12
When loading NROs, svcBreak is called to signal to the debugger that a new "module" is loaded. As no debugger is technically attached we shouldn't be killing the programs execution.
2018-10-08Unmapping an unmapped buffer should succeedDavid Marcec1-1/+6
Hardware tests show that trying to unmap an unmapped buffer already should always succeed. Hardware test was tested up to 32 iterations of attempting to unmap
2018-10-07gl_shader_decompiler: Move position varying location from 15 to 0 and apply an offsetReinUsesLisp1-6/+10
2018-10-07gl_shader_decompiler: Implement geometry shadersReinUsesLisp10-107/+522
2018-10-07video_core: Allow LabelGLObject to use extra info on any objectReinUsesLisp1-10/+14
2018-10-07nso/nro: Use default allocation size for arg_dataZach Hilman4-14/+20
2018-10-07cmd: Support passing game arguments from command lineZach Hilman4-10/+14
Uses -p (--program) and following string as args.
2018-10-07qt: Add UI option to configure argumentsZach Hilman3-0/+27
2018-10-07settings: Add program_args string settingZach Hilman1-0/+1
2018-10-07nso/nro: Add NSO arguments structure to data sectionZach Hilman4-3/+38
Only added if arguments string is non-empty and a pass is requested by loader.
2018-10-07partition_data_manager: Rename system files for hekateZach Hilman6-195/+247
x
2018-10-07qt: Add rederive keyset menu optionZach Hilman3-49/+89
2018-10-07qt: Add key derivation progress bar on initial setupZach Hilman1-0/+52
2018-10-07crypto: Add PartitionDataManagerZach Hilman3-0/+692
Keeps track of system files for key derivation
2018-10-07key_manager: Add support for loading keys from partition dataZach Hilman2-0/+88
2018-10-07key_manager: Add ETicket key derivationZach Hilman3-2/+277
Derives titlekeys
2018-10-07key_manager: Add base key derivationZach Hilman2-4/+220
Derives master keys, game encryption keys, and package1/2 keys
2018-10-07key_manager: Add BIS key getterZach Hilman2-2/+19
2018-10-07key_manager: Add support for more keysZach Hilman2-3/+99
TSEC, SBK, BIS, and other Sources for proper derivation
2018-10-07key_manager: Add keyblob supportZach Hilman2-0/+14
2018-10-07key_manager: Add support for crypto revisions past 04Zach Hilman1-43/+63
2018-10-07key_manager: Add support for comments in keyfilesZach Hilman1-0/+3
2018-10-07vfs: Move forward declarations to separate fileZach Hilman2-9/+22
2018-10-07key_manager: Add support for console-specific keyfileZach Hilman2-3/+13
2018-10-07key_manager: Rename KEK to KekZach Hilman2-8/+9
2018-10-07Fixed assertion due to CountAddOnContentDavid Marcec1-5/+5
Word count should be 3 since we're pushing a result code and a u32. Also fixed up compiler warnings due to casting
2018-10-07Fixups for softlockDavid Marcec2-6/+7
2018-10-07Fixed missing returnDavid Marcec1-1/+1
Softlock explanation: after effects are initialized in smo, nothing actually changes the state. It expects the state to always be initialized. With the previous testing, updating the states much like how we handle the memory pools continue to have the softlock(which is why I said it probably wasn't effects) after further examination it seems like effects need to be initialized but the state remains unchanged until further notice. For now, assertions are added for the aux buffers to see if they update, unable to check as I haven't gotten smo to actually update them yet.
2018-10-07Fixed smo softlockDavid Marcec2-13/+120
2018-10-07logging: Add DebuggerBackend for logging to Visual StudioCarl Kenner4-2/+29
2018-10-07gl_rasterizer: Fixup undefined behaviour in SetupDrawReinUsesLisp1-0/+1
2018-10-06yuzu/yuzu_cmd: Add checks for required extension ARB_copy_image.bunnei2-0/+4
2018-10-06Implemented Depth Compare and Shadow SamplersFernandoS276-65/+224
2018-10-06Remove "#" in the version numberfearlessTobi1-1/+1
So that people can stop using it in issue/pr comments and randomly link some other issue/pr unintentionally.
2018-10-06citra_qt/configuration: misc input tab improvementszhupengfei5-19/+119
* Added a context menu on the buttons including Clear & Restore Default * Allow clearing (unsetting) inputs. Added a Clear All button * Allow restoring a single input to default (instead of all)
2018-10-06Added forward define for ServerPortDavid Marcec2-4/+6
2018-10-06fermi_2d: Implement simple copies with AccelerateSurfaceCopy.bunnei3-24/+36
2018-10-06gl_rasterizer: Add rasterizer cache code to handle accerated fermi copies.bunnei5-16/+60
2018-10-06gl_rasterizer_cache: Implement a simpler surface copy using glCopyImageSubData.bunnei1-0/+21
2018-10-06qt: Update telemetry linksLioncash2-2/+2
These were pointing to a non-existent webpage.
2018-10-06Ported #4296 from citraDavid Marcec3-1/+25
This will allow us to easily remove the use of "NFC" in "System"
2018-10-06kernel/mutex: Amend behavior of TransferMutexOwnership()Lioncash1-1/+1
This was the result of a typo accidentally introduced in e51d715700a35a8f14e5b804b6f7553c9a40888b. This restores the previous correct behavior. The behavior with the reference was incorrect and would cause some games to fail to boot.
2018-10-05thread: Make the scheduler pointer a regular pointerbalika0112-4/+4
Conceptually, it doesn't make sense for a thread to be able to persist the lifetime of a scheduler. A scheduler should be taking care of the threads; the threads should not be taking care of the scheduler. If the threads outlive the scheduler (or we simply don't actually terminate/shutdown the threads), then it should be considered a bug that we need to fix. Attributing this to balika011, as they opened #1317 to attempt to fix this in a similar way, but my refactoring of the kernel code caused quite a few conflicts.
2018-10-05romfs_factory: Extract packed update setter to new functionZach Hilman10-9/+38
2018-10-05patch_manager: Add support for NSP packed updatesZach Hilman2-3/+10
Reads as Update (NSP) in add-ons
2018-10-05game_list: Add XCI update versioning to game listZach Hilman1-4/+8
2018-10-05patch_manager: Add support for packed updatesZach Hilman4-5/+18
Will prefer any installed update over the packed version.
2018-10-05loader: Add getter for packed updateZach Hilman6-3/+58
Reads the update included with the game if it has one and adds the new ErrorNoPackedUpdate status.
2018-10-05loader: Add ReadRomFSIVFCOffset to NSP, XCI, and NAX loadersZach Hilman6-6/+20
Fixes errors with certain updates
2018-10-05text_formatter: Avoid unnecessary string temporary creation in PrintMessage()Lioncash1-1/+1
operator+ for std::string creates an entirely new string, which is kind of unnecessary here if we just want to append a null terminator to the existing one. Reduces the total amount of potential allocations that need to be done in the logging path.
2018-10-04patch_manager: Avoid romfs_ext requirement for patchingZach Hilman1-4/+1
2018-10-04fsmitm_romfsbuild: Extract stubs and IPS to romfs_ext dirZach Hilman5-21/+38
2018-10-04fsmitm_romfsbuild: Add support for stubbing and IPS patches in LFSZach Hilman1-0/+14
2018-10-04ips_layer: Fix inaccuracies with comments and flagsZach Hilman3-16/+51
Specifically bugs/crashes that arise when putting them in positions that are legal but not typical, such as midline, between patch data, or between patch records.
2018-10-04ips_layer: Deduplicate resource usageZach Hilman5-33/+39
2018-10-04ips_layer: Add support for escape sequences and midline commentsZach Hilman3-8/+41
More accurately follows IPSwitch specification.
2018-10-04patch_manager: Add support for IPSwitch format patchesZach Hilman1-22/+56
2018-10-04ips_layer: Add IPSwitchCompiler to process IPSwitch formatZach Hilman2-0/+168
2018-10-04hex_util: Add HexVectorToString and HexStringToVectorZach Hilman2-0/+24
Converts between bytes and strings when the size is not known at compile time.
2018-10-04ui_settings: Place definition of the theme array within the cpp fileLioncash3-5/+10
Placing the array wholesale into the header places a copy of the whole array into every translation unit that uses the data, which is wasteful. Particularly given that this array is referenced from three different translation units. This also changes the array to contain pairs of const char*, rather than QString instances. This way, the string data is able to be fixed into the read-only segment of the program, as well as eliminate static constructors/heap allocation immediately on program start.
2018-10-04kernel/thread: Make all instance variables privateLioncash15-227/+418
Many of the member variables of the thread class aren't even used outside of the class itself, so there's no need to make those variables public. This change follows in the steps of the previous changes that made other kernel types' members private. The main motivation behind this is that the Thread class will likely change in the future as emulation becomes more accurate, and letting random bits of the emulator access data members of the Thread class directly makes it a pain to shuffle around and/or modify internals. Having all data members public like this also makes it difficult to reason about certain bits of behavior without first verifying what parts of the core actually use them. Everything being public also generally follows the tendency for changes to be introduced in completely different translation units that would otherwise be better introduced as an addition to the Thread class' public interface.
2018-10-04gl_rasterizer: Implement quads topologyReinUsesLisp8-46/+236
2018-10-03Implemented Texture Processing Modes in TEXS and TLDSFernandoS271-5/+42
2018-10-03submission_package: Avoid dangling std::string_view within SetTicketKeys()Lioncash1-2/+5
GetName() returns a std::string by value, not by reference, so after the std::string_view is constructed, it's not well defined to actually execute any member functions of std::string_view that attempt to access the data, as the std::string has already been destroyed. Instead, we can just use a std::string and erase the last four characters.
2018-10-03submission_package: Correct location of null check within SetTicketKeys()Lioncash1-3/+6
If a ticket file was ever a null pointer, we'd cause a null pointer dereference, as we were calling GetExtension() on the pointer instance.
2018-10-03submission_package: Use std::string's rfind() when looking for the extension in InitializeExeFSAndRomFS()Lioncash1-1/+1
When searching for a file extension, it's generally preferable to begin the search at the end of the string rather than the beginning, as the whole string isn't going to be walked just to check for something at the end of it.
2018-10-03submission_package: Ensure the 'extracted' member variable is always initializedLioncash2-3/+1
If an error occurs when constructing the PartitionFilesystem instance, the constructor would be exited early, which wouldn't initialize the extracted data member, making it possible for other code to perform an uninitialized read by calling the public IsExtractedType() member function. This prevents that.
2018-10-03submission_package: Move ExeFS and RomFS initialization to its own functionLioncash2-10/+18
Like the other two bits of factored out code, this can also be put within its own function. We can also modify the code so that it accepts a const reference to a std::vector of files, this way, we can deduplicate the file retrieval. Now the constructor for NSP isn't a combination of multiple behaviors in one spot. It's nice and separate.
2018-10-03submission_package: Move NCA reading code to its own functionLioncash2-43/+48
This too, is completely separate behavior from what is in the constructor, so we can move this to its own isolated function to keep everything self-contained.
2018-10-03submission_package: Move ticket key setting to its own functionLioncash1-21/+28
This behavior is entirely independent of the surrounding code, so it can be put in its own function to keep the behavior separate.
2018-10-03submission_package: Invert conditionals within NSP's constructor to reduce nestingLioncash1-45/+49
We can use early continues here to reduce the amount of nesting.
2018-10-03card_image: Ensure program_nca_status is always initializedLioncash1-1/+3
If any of the error paths before the NCA retrieval are taken, it'll result in program_nca_status being left in an inconsistent state. So we initialize it by default with a value indicating an error.
2018-10-03aoc_u: Fix edge case with DLC that causes breaksZach Hilman1-1/+1
In some games (Splatoon 2 and Splatoon 2 Splatfest World Premiere, notably), pass offset=0 and count=2047 into the ListAddOnContent method which should return all DLCs for the current title. The (presumably) intended behavior is to successfully return a empty array but because of a < v. <= in an if statement, a failure error code was returned causing these games to svcBreak. This fixes that if statement.
2018-10-03services/fsp_srv: Amend service function tableLioncash1-0/+2
Adds new functions that have been given names to the table. Information is based off what is provided on Switchbrew.
2018-10-03service/lbl: Update service function tableLioncash1-19/+19
Amends the lbl service table to include new names of functions that were added to Switchbrew.
2018-10-03configure_input: Make analog mapping strings translatableLioncash1-3/+3
These strings are user-facing, so they should be specified as translatable with tr().
2018-10-03configure_audio: Move combo box index setting to their own functionsLioncash2-11/+25
Keeps the individual behaviors in their own functions, and cleanly separate. We can also do a little better by converting the relevant IDs within the core to a QString only once, instead of converting every string into a std::string.
2018-10-03configure_audio: Use QString::fromStdString() for converting audio device namesLioncash1-3/+3
This ensures that the proper codec will always be used no matter what. It also avoids relying on ASCII conversions.
2018-10-03configure_audio: Add disambiguation comment for the volume percentage stringLioncash2-4/+8
Disambiguates what the string represents to help translators more easily understand what it is that they're translating. While we're at it, we can move the code to its own function, so that we don't need to specify the same string twice.
2018-10-03configure_graphics: Make functions internally linked where applicableLioncash1-21/+23
These aren't used outside of this translation unit, so they can be internally linked.
2018-10-02nso: Optimize loading of IPS patchesZach Hilman5-51/+43
Avoid resource-heavy classes and remove quasi-duplicated code.
2018-10-02string_util: unify UTF8<->UTF16 conversion to codecvtWeiyi Wang1-109/+6
2018-10-02string_util: remove TString conversion for windowsWeiyi Wang2-19/+1
First of all they are foundamentally broken. As our convention is that std::string is always UTF-8, these functions assume that the multi-byte character version of TString (std::string) from windows is also in UTF-8, which is almost always wrong. We are not going to build multi-byte character build, and even if we do, this dirty work should be handled by frontend framework early.
2018-10-02string_util: remove ShiftJIS/CP1252 conversion functionWeiyi Wang2-22/+0
We always use unicode internally. Any dirty work of conversion with other codec should be handled by frontend framework (Qt). Further more, ShiftJIS/CP1252 are not special (they are not code set used by 3ds, or any guest/host dependencies we have), so there is no reason to specifically include them
2018-10-02Review comments - part 5fearlessTobi4-8/+7
2018-10-02Review comments -part 4fearlessTobi3-2/+7
2018-10-02Review comments - part 3fearlessTobi6-25/+7
2018-10-02web_backend: protect jwt cache with a mutexWeiyi Wang2-1/+4
2018-10-02Address more review commentsfearlessTobi1-1/+1
2018-10-02Address a bunch of review commentsfearlessTobi11-19/+27
2018-10-02Port web_service from CitrafearlessTobi37-34/+1554
2018-10-01deconstructed_rom_directory: Force NSO loader to patch NSOsZach Hilman1-1/+3
2018-10-01nso: Add framework to support patching of uncompressed NSOsZach Hilman2-2/+17
2018-10-01patch_manager: Add PatchNSO functionZach Hilman3-0/+104
While PatchExeFS operated on the entire directory, this function operates on the uncompressed NSO. Avoids copying decompression code to PatchManager.
2018-10-01patch_manager: Use strings for patch type instead of enumZach Hilman3-33/+36
2018-10-01file_sys: Implement function to apply IPS patchesZach Hilman2-0/+103
2018-10-01nso: Replace NSOHeader padding bytes with build IDZach Hilman1-2/+1
2018-10-01gl_rasterizer: Fixup unassigned point sizesReinUsesLisp1-1/+4
2018-10-01aoc_u: Extract AccumulateAOCTitleIDs to separate functionZach Hilman2-21/+28
2018-10-01aoc_u: Implement GetAddOnContentBaseIdZach Hilman3-5/+8
Command #5
2018-10-01aoc_u: Implement Count, List and Prepare AddOnContentZach Hilman2-3/+78
Commands #2, #3, and #7
2018-10-01romfs_factory: Read from all locations with StorageId NoneZach Hilman1-26/+25
Previous behavior was to assert. Seems to mirror expected game behavior.
2018-10-01patch_manager: Add DLC recognition to PatchManagerZach Hilman2-0/+27
2018-09-30gl_rasterizer_cache: Fixes to how we do render to cubemap.bunnei2-32/+5
- Fixes issues with Splatoon 2.
2018-09-30gl_rasterizer_cache: Add check for array rendering to cubemap texture.bunnei1-0/+8
2018-09-30gl_rasterizer_cache: Implement render to cubemap.bunnei3-119/+218
2018-09-30gl_shader_decompiler: TEXS: Implement TextureType::TextureCube.bunnei1-0/+8
2018-09-30gl_rasterizer_cache: Add support for SurfaceTarget::TextureCubemap.bunnei2-1/+36
2018-09-30gl_rasterizer_cache: Implement LoadGLBuffer for Texture2DArray.bunnei1-0/+8
2018-09-30gl_rasterizer_cache: Update BlitTextures to support non-Texture2D ColorTexture surfaces.bunnei1-23/+88
2018-09-30gl_rasterizer_cache: Track texture target and depth in the cache.bunnei1-2/+3
2018-09-30gl_rasterizer_cache: Workaround for Texture2D -> Texture2DArray scenario.bunnei3-6/+21
2018-09-30gl_rasterizer_cache: Keep track of surface 2D size separately from total size.bunnei2-32/+46
2018-09-30Fix trailing whitespaceraven021-1/+4
2018-09-30kernel/svc: Implement svcGetThreadContext()Lioncash3-2/+37
Now that we have all of the rearranging and proper structure sizes in place, it's fairly trivial to implement svcGetThreadContext(). In the 64-bit case we can more or less just write out the context as is, minus some minor value sanitizing. In the 32-bit case we'll need to clear out the registers that wouldn't normally be accessible from a 32-bit AArch32 exectuable (or process).
2018-09-30kernel/process: Add a data member to determine if a process is 64-bit or not.Lioncash2-0/+11
This will be necessary for the implementation of svcGetThreadContext(), as the kernel checks whether or not the process that owns the thread that has it context being retrieved is a 64-bit or 32-bit process. If the process is 32-bit, then the upper 15 general-purpose registers and upper 16 vector registers are cleared to zero (as AArch32 only has 15 GPRs and 16 128-bit vector registers. not 31 general-purpose registers and 32 128-bit vector registers like AArch64).
2018-09-30kernel/process: Make data member variables privateLioncash18-75/+120
Makes the public interface consistent in terms of how accesses are done on a process object. It also makes it slightly nicer to reason about the logic of the process class, as we don't want to expose everything to external code.
2018-09-30arm_interface: Add missing fpsr/tpidr members to the ThreadContext structLioncash3-5/+15
Internally within the kernel, it also includes a member variable for the floating-point status register, and TPIDR, so we should do the same here to match it. While we're at it, also fix up the size of the struct and add a static assertion to ensure it always stays the correct size.
2018-09-30Implement ISystemDisplayService::GetDisplayModeraven021-1/+19
2018-09-29loader: Make the Load() function take a process as a regular reference, not a SharedPtrLioncash18-42/+28
A process should never require being reference counted in this situation. If the handle to a process is freed before this function is called, it's definitely a bug with our lifetime management, so we can put the requirement in place for the API that the process must be a valid instance.
2018-09-28kernel/object: Remove unnecessary std::move from DynamicObjectCast()Lioncash2-3/+2
boost::static_pointer_cast for boost::intrusive_ptr (what SharedPtr is), takes its parameter by const reference. Given that, it means that this std::move doesn't actually do anything other than obscure what the function's actual behavior is, so we can remove this. To clarify, this would only do something if the parameter was either taking its argument by value, by non-const ref, or by rvalue-reference.
2018-09-28video_core: Implement point_size and add point state syncReinUsesLisp5-1/+27
2018-09-28gl_state: Pack sampler bindings into a single ARB_multi_bindReinUsesLisp5-8/+25
2018-09-27qt: Install System TitleTypes to System NANDZach Hilman1-4/+14
Fixes an issue where installed system archive NCAs would be installed to user NAND and not recognized by games.
2018-09-26fsmitm_romfsbuild: std::move std::vector instances in Build()Lioncash1-2/+2
Avoids making copies of large std::vector instances where it's trivially avoidable to do so.
2018-09-26fsmitm_romfsbuild: Replace manual value aligning with Common::AlignUp()Lioncash1-12/+11
Theres no need to do explicit bitwise arithmetic here, when we have a function that does this with a more descriptive name.
2018-09-26patch_manager: Invert conditionals within ApplyLayeredFS()Lioncash1-27/+30
Avoids the need to nest code quite a bit by early-exiting in error cases.
2018-09-26video_core: Add asserts for CS, TFB and alpha testingReinUsesLisp5-3/+92
Add asserts for compute shader dispatching, transform feedback being enabled and alpha testing. These have in common that they'll probably break rendering without logging.
2018-09-26vfs_vector: Amend initializer list order in VectorVfsFile's constructor initializer listLioncash1-1/+1
Orders the initializer list members to be in the same order that they would be initialized in. Avoids compiler warnings.
2018-09-26fsmitm_romfsbuild: Avoid type truncation warningsLioncash1-7/+10
Cast where explicitly necessary and in other cases we can simply modify the algorithm to accomodate larger data.
2018-09-26fsmitm_romfsbuild: Remove unnecessary constructors and initializers for RomFSBuildFileContext and RomFSBuildDirectoryContextLioncash1-5/+3
There's no need to duplicate in-class initializers with a constructor initializer list. std::strings also initialize to empty by default.
2018-09-26fsmitm_romfsbuild: Remove unnecessary loops in Build()Lioncash1-6/+0
The std::vector instances are already initially allocated with all entries having these values, there's no need to loop through and fill them with it again when they aren't modified.
2018-09-26fsmitm_romfsbuild: Make auto variable into a std::size_t variable within Build()Lioncash1-1/+1
auto x = 0; auto-deduces x to be an int. This is undesirable when working with unsigned values. It also causes sign conversion warnings. Instead, we can make it a proper unsigned value with the correct width that the following expressions operate on.
2018-09-26yuzu/main: Resolve precedence bug within CalculateRomFSEntrySize()Lioncash1-1/+1
Ternary operators have a lower precedence than arithmetic operators, so what was actually occurring here is "return (out + full) ? x : y" which most definitely isn't intended, given we calculate out recursively above. We were essentially doing a lot of work for nothing.
2018-09-26yuzu/main: Move functions stored into static std::function instances out of OnGameListDumpRomFS()Lioncash1-42/+42
This can cause warnings about static constructors, and is also not ideal performance-wise due to the indirection through std::function. This also keeps the behavior itself separate from the surrounding code, which can make it nicer to read, due to the size of the code.
2018-09-26vfs/etc: Append std:: to size_t usagesLioncash7-29/+30
Given we just recently had a patch backport this from citra, let's try and keep the convention uniform.
2018-09-26vfs_concat/vfs_layered: Remove friend declarations from ConcatenatedVfsFileLioncash8-61/+59
Given these are only added to the class to allow those functions to access the private constructor, it's a better approach to just make them static functions in the interface, to make the dependency explicit.
2018-09-25vfs_static: Remove template byte parameter from StaticVfsFileLioncash4-42/+42
This converts it into a regular constructor parameter. There's no need to make this a template parameter on the class when it functions perfectly well as a constructor argument. This also reduces the amount of code bloat produced by the compiler, as it doesn't need to generate the same code for multiple different instantiations of the same class type, but with a different fill value.
2018-09-25service: Add missing headers inclusions where applicableLioncash5-1/+7
Gets rid of a few indirect inclusions.
2018-09-25core_cpu: Make arm_interface instances a std::unique_ptrLioncash2-4/+4
This is only exposed by reference, so we can just make it a unique pointer to get rid of the need to also use reference counting for the pointer.
2018-09-25kernel/scheduler: Take ARM_Interface instance by reference in the constructorLioncash3-10/+10
It doesn't make sense to allow a scheduler to be constructed around a null pointer.
2018-09-25memory: Dehardcode the use of fixed memory range constantsLioncash11-75/+60
The locations of these can actually vary depending on the address space layout, so we shouldn't be using these when determining where to map memory or be using them as offsets for calculations. This keeps all the memory ranges flexible and malleable based off of the virtual memory manager instance state.
2018-09-25svc: Report correct memory-related values within some of the cases in svcGetInfo()Lioncash3-28/+41
Previously, these were reporting hardcoded values, but given the regions can change depending on the requested address spaces, these need to report the values that the memory manager contains.
2018-09-25memory: Dehardcode the use of a 36-bit address spaceLioncash6-22/+61
Given games can also request a 32-bit or 39-bit address space, we shouldn't be hardcoding the address space range as 36-bit.
2018-09-24process/vm_manager: Amend API to allow reading parameters from NPDM metadataLioncash10-38/+259
Rather than hard-code the address range to be 36-bit, we can derive the parameters from supplied NPDM metadata if the supplied exectuable supports it. This is the bare minimum necessary for this to be possible. The following commits will rework the memory code further to adjust to this.
2018-09-24Implemented fatal:u properly (#1347)David3-4/+140
* Implemented fatal:u properly fatal:u now is properly implemented with all the ipc cmds. Error reports/Crash reports are also now implemented for fatal:u. Crash reports save to yuzu/logs/crash_reports/ The register dump is currently known as sysmodules send all zeros. If there are any non zero values for the "registers" or the unknown values, let me know! * Fatal:U fixups * Made fatal:u execution break more clear * Fatal fixups
2018-09-24Stubbed IRS (#1349)David4-18/+169
* Stubbed IRS Currently we have no ideal way of implementing IRS. For the time being we should have the functions stubbed until we come up with a way to emulate IRS properly. * Added IRS to logging backend * Forward declared shared memory for irs
2018-09-24fsmitm: Cleanup and modernize fsmitm portZach Hilman22-378/+378
2018-09-24stream: Preserve enum class type in GetState()Lioncash5-12/+12
Preserves the meaning/type-safetiness of the stream state instead of making it an opaque u32. This makes it usable for other things outside of the service HLE context.
2018-09-24svc: Updated svc namestech4me1-7/+7
2018-09-23Added glObjectLabels for renderdoc for textures and shader programs (#1384)David4-0/+48
* Added glObjectLabels for renderdoc for textures and shader programs * Changed hardcoded "Texture" name to reflect the texture type instead * Removed string initialize
2018-09-23correct BC6Hgreggameplayer1-2/+2
2018-09-23Added audren:u#GetAudioRendererStateDavid Marcec5-1/+21
2018-09-23FPCR register was uninitialized at start upPhilippe Babin1-1/+1
2018-09-22common/thread: remove YieldCPU()Weiyi Wang1-8/+0
simply use the standard library yield()
2018-09-22game_list: Add Qt SmoothTransformation to picture scalingZach Hilman1-1/+1
2018-09-22qt: Add UI elements for LayeredFS and related toolsZach Hilman6-5/+162
2018-09-22romfs: Implement CreateRomFSZach Hilman2-4/+25
2018-09-22file_sys: Port Atmosphere-NX fs_mitm implementationZach Hilman2-0/+474
2018-09-22filesystem: Add LayeredFS VFS directory getterZach Hilman2-1/+14
2018-09-22bis_factory: Add mod directory VFS getterZach Hilman3-3/+18
2018-09-22patch_manager: Add LayeredFS mods supportZach Hilman2-1/+44
2018-09-22vfs_concat: Rewrite and fix ConcatenatedVfsFileZach Hilman2-14/+59
2018-09-22vfs_layered: Add LayeredVfsDirectoryZach Hilman2-0/+178
Reads multiple dirs through as if a waterfall.
2018-09-22vfs_vector: Add VectorVfsFileZach Hilman2-0/+75
Maps a vector into the VFS interface.
2018-09-22vfs_static: Add StaticVfsFileZach Hilman2-0/+78
Always returns the template argument byte for all reads. Doesn't support writes.
2018-09-22vfs: Add and rewite VfsRawCopy functionsZach Hilman2-6/+36
2018-09-22vfs: Add GetEntries methodZach Hilman4-0/+32
Maps name string to directory or file.
2018-09-22common_paths: Add Load and Dump dirsZach Hilman3-0/+6
2018-09-22gl_state: Remove unused type aliasLioncash2-4/+1
This isn't used anywhere within the header, so we can remove it, along with the include that was previously necessary. This also uncovers an indirect include in the cpp file for the assertion macros.
2018-09-21Update config.cppValentin Vanelslande1-1/+1
2018-09-21shader_bytecode: Lay out the Ipa-related enums betterLioncash1-2/+12
This is more consistent with the surrounding enums.
2018-09-21shader_bytecode: Make operator== and operator!= of IpaMode const qualifiedLioncash1-6/+7
These don't affect the state of the struct and can be const member functions.
2018-09-21game_list: move SearchField to game_list_p.h and fix untranslated textzhupengfei3-35/+51
I have tested and made sure the text is translatable, but this would require a translation update to take effect.
2018-09-21Reverse stride align restriction on FastSwizzle due to lost performanceFernandoS271-3/+2
2018-09-21Join both Swizzle methods within one interface functionFernandoS271-11/+19
2018-09-21Standarized Legacy Swizzle to look alike FastSwizzle and use a Swizzling Table insteadFernandoS271-42/+38
2018-09-21Remove same output bpp restriction on FastSwizzleFernandoS271-4/+5
2018-09-21Improved Legacy Swizzler to be better documented and work betterFernandoS271-15/+21
2018-09-21gl_stream_buffer: Fix use of bitwise OR instead of logical OR in Map()Lioncash1-1/+1
This was very likely intended to be a logical OR based off the conditioning and testing of inversion in one case. Even if this was intentional, this is the kind of non-obvious thing one should be clarifying with a comment.
2018-09-21svc: Move most process termination code to its own function within ProcessLioncash3-32/+56
Reduces the use of Process class members externally and keeps most code related to tearing down a process with the rest of the process code.
2018-09-21thread/process: Move TLS slot marking/freeing to the process classLioncash4-68/+89
Allows making several members of the process class private, it also avoids going through Core::CurrentProcess() just to retrieve the owning process.
2018-09-21Added support for uncompressed NSOs (#1374)David1-3/+12
* Added support for uncompressed NSOs * Moved compressed section check to NsoHeader
2018-09-21Logging: Change the TimeStretch::Process log from debug to trace level.Subv1-1/+1
This function is called too many times and makes the debug logging basically unusable due to the spam.
2018-09-21RasterizerGL: Use the correct framebuffer when clearing via the CLEAR_BUFFERS register.Subv1-1/+1
Previously we were clearing the default backbuffer framebuffer. Found thanks to a Piglit test :)
2018-09-21Improved fast swizzle and removed restrictions to itFernandoS271-7/+12
2018-09-21Revert GetRequestStateDavid Marcec1-1/+1
Even though setting this value to 3 is more correct. We break more games than we fix due to missing implementations. We should keep this as 0 for the time being
2018-09-21kernel/thread: Use owner_process when setting the page table in SetupMainThread()Lioncash3-5/+5
The owning process of a thread is required to exist before the thread, so we can enforce this API-wise by using a reference. We can also avoid the reliance on the system instance by using that parameter to access the page table that needs to be set.
2018-09-21arm_interface: Replace kernel vm_manager include with a forward declarationLioncash5-1/+11
Avoids an unnecessary inclusion and also uncovers three places where indirect inclusions were relied upon, which allows us to also resolve those.
2018-09-20Correct endianness of BKPTJarek Syrylak1-1/+1
2018-09-20arm_dynarmic: Halt when BRK encounteredMerryMage1-0/+1
2018-09-20Fixed submitDavid Marcec1-2/+1
2018-09-20Added IRequest::SubmitDavid Marcec1-1/+8
This fixes updated versions of SMO. Currently unable to test as I don't have an updated version
2018-09-20game_list: Handle plurals within setFilterResult() betterLioncash1-9/+1
Qt provides an overload of tr() that operates on quantities in relation to pluralization. This also allows the translation to adapt based on the target language rules better. For example, the previous code would result in an incorrect translation for the French language (which doesn't use the pluralized version of "result" in the case of a total of zero. While in English it's correct to use the pluralized version of "result", that is, "results" --- For example: English: "0 results" French: "0 résultat" (uses the singular form) In French, the noun being counted is singular if the quantity is 0 or 1. In English, on the other hand, if the noun being counted has a quantity of 0 or N > 1, then the noun is pluralized. --- For another example in a language that has different counting methods than the above, consider English and Irish. Irish has a special form of of a grammatical number called a dual. Which alters how a word is written when N of something is 2. This won't appear in this case with a direct number "2", but it would change if we ever used "Two" to refer to two of something. For example: English: "Zero results" Irish: "Toradh ar bith" English: "One result" Irish: "Toradh amháin" English: "Two results" Irish: "Dhá thorthaí" <- Dual case Which is an important distinction to make between singular and plural, because in other situations, "two" on its own would be written as "dó" in Irish. There's also a few other cases where the order the words are placed *and* whether or not the plural or singular variant of the word is used *and* whether or not the word is placed after or between a set of numbers can vary. Counting in Irish also differs depending on whether or not you're counting things (like above) or counting people, in which case an entirely different set of numbers are used. It's not important for this case, but it's provided as an example as to why one should never assume the placement of values in text will be like that of English or other languages. Some languages have very different ways to represent counting, and breaking up the translated string like this isn't advisable because it makes it extremely difficult to get right depending on what language a translator is translating text into due to the ambiguity of the strings being presented for translation. In this case a translator would see three fragmented strings on Transifex (and not necessarily grouped beside one another, but even then, it would still be annoying to decipher): - "of" - "result" - "results" There is no way a translator is going to know what those sets of words are actually used for unless they look at the code to see what is being done with them (which they shouldn't have to do).
2018-09-20Removed unneeded event clearDavid Marcec1-1/+0
2018-09-20Implemented NTC & IEnsureNetworkClockAvailabilityServiceDavid Marcec1-3/+100
Needed because of the recent nim fixes
2018-09-20file-sys: Default heavy-weight class destructors in the cpp fileLioncash25-1/+45
Several classes have a lot of non-trivial members within them, or don't but likely should have the destructor defaulted in the cpp file for future-proofing/being more friendly to forward declarations. Leaving the destructor unspecified allows the compiler to inline the destruction code all over the place, which is generally undesirable from a code bloat perspective.
2018-09-20control_metadata: Remove unnecessary else within GetLanguageEntry()Lioncash1-8/+8
There's no need to indent the code here, given the if case contains a return statement at the end of it.
2018-09-20control_metadata: Move language name array definition to the cpp fileLioncash2-6/+9
This was used in two different translation units (deconstructed_rom_directory and patch_manager). This means we'd be pointlessly duplicating the whole array twice due to it being defined within the header.
2018-09-19arm_dynarmic: Support BKPT instructionMerryMage1-0/+11
2018-09-19xts_archive: Remove unused variables from CalculateHMAC256()Lioncash1-3/+0
These variables aren't used, which still has an impact, as std::vector cannot be optimized away by the compiler (it's constructor and destructor are both non-trivial), so this was just wasting memory.
2018-09-19xts_archive: Make AsNCA() return a std::unique_ptr instead of a std::shared_ptrLioncash2-3/+3
std::shared_ptr isn't strictly necessary here and is only ever used in contexts where the object doesn't depend on being shared. This also makes the interface more flexible, as it's possible to create a std::shared_ptr from a std::unique_ptr (std::shared_ptr has a constructor that accepts a std::unique_ptr), but not the other way around.
2018-09-19nax: Avoid re-parsing NAX data with GetFileType()Lioncash2-13/+19
An instance of the NAX apploader already has an existing NAX instance in memory. Calling directly into IdentifyType() directly would re-parse the whole file again into yet another NAX instance, only to toss it away again. This gets rid of unnecessary/redundant file parsing and allocations.
2018-09-19nax: Avoid unnecessary calls to AsNCA() in IdentifyType()Lioncash1-4/+8
AsNCA() allocates an NCA instance every time it's called. In the current manner it's used, it's quite inefficient as it's making a redundant allocation. We can just amend the order of the conditionals to make it easier to just call it once.
2018-09-19xts_archive: Ensure NAX's type member is always initializedLioncash1-1/+1
Ensures that the member always has a deterministic value.
2018-09-19xts_archive: Amend initializer order of NAX's constructorLioncash1-2/+2
Orders the initializer list in the same order the members would be initialized. Avoids compiler warnings.
2018-09-19Reworked incorrect nifm stubs (#1355)David1-3/+10
* Reworked incorrect nifm stubs Need confirmation on `CreateTemporaryNetworkProfile`, unsure which game uses it but according to reversing. It should return a uuid which we currently don't do. Any 0 client id is considered an invalid client id. GetRequestState 0 is considered invalid. * Fixups for nifm
2018-09-19Fixed GetAccountId stub, Added error code for OpenDirectory and added ActivateNpadWithRevisionDavid Marcec3-7/+12
With these, `Nintendo Entertainment System - Nintendo Switch Online` loads
2018-09-19yuzu-cmd: Add call to CreateFactoriesZach Hilman1-1/+3
Ensures all relevant filesystem objects are initialized and eliminates a crash related to the RegisteredCache.
2018-09-19savedata_factory: Add TemporaryStorage SaveDataTypeZach Hilman1-4/+7
Seems to be used by NSO NES Emulator
2018-09-19gl_rasterizer: Fix StartAddress handling with indexed draw calls.Markus Wick1-6/+7
We uploaded the wrong data before. So the offset on the host GPU pointer may work for the first vertices, the last ones run out bounds. Let's just offset the upload instead.
2018-09-19Corrected SSL::SetInterfaceVersionDavid Marcec1-3/+3
Should be a single u32
2018-09-19Removed MakeBuilder as it's not needed anymoreDavid Marcec1-7/+0
2018-09-19Removed the use of rp.MakeBuilderDavid Marcec6-27/+26
Due to keeping the code style consistent in the yuzu codebase. `rb = rp.MakeBuilder(...)` was replaced with `rb{ctx, ...}`
2018-09-19ring_buffer: Use std::atomic_size_t in a static assertLioncash1-1/+1
Avoids the need to repeat "std::" twice
2018-09-19ring_buffer: Use std::hardware_destructive_interference_size to determine alignment size for avoiding false sharingLioncash1-2/+10
MSVC 19.11 (A.K.A. VS 15.3)'s C++ standard library implements P0154R1 (http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0154r1.html) which defines two new constants within the <new> header, std::hardware_destructive_interference_size and std::hardware_constructive_interference_size. std::hardware_destructive_interference_size defines the minimum recommended offset between two concurrently-accessed objects to avoid performance degradation due to contention introduced by the implementation (with the lower-bound being at least alignof(max_align_t)). In other words, the minimum offset between objects necessary to avoid false-sharing. std::hardware_constructive_interference_size on the other hand defines the maximum recommended size of contiguous memory occupied by two objects accessed wth temporal locality by concurrent threads (also defined to be at least alignof(max_align_t)). In other words the maximum size to promote true-sharing. So we can simply use this facility to determine the ideal alignment size. Unfortunately, only MSVC supports this right now, so we need to enclose it within an ifdef for the time being.
2018-09-19Invalid default value of username in yuzu_cmd (#1334)Philippe Babin3-3/+8
* Fix bug where default username value for yuzu_cmd create an userprofile with uninitialize data as username * Fix format * Apply code review changes * Remove nullptr check
2018-09-18Added ActivateGestureDavid Marcec1-1/+7
2018-09-18Implemented GetDefaultDisplayResolutionDavid Marcec2-1/+18
2018-09-18Added StopSixAxisSensorDavid Marcec1-1/+7
2018-09-18Stubbed ActivateConsoleSixAxisSensor & StartConsoleSixAxisSensorDavid Marcec1-2/+14
2018-09-18Implemented GetImageSizeDavid Marcec1-1/+9
2018-09-18svc_wrap: Convert the PARAM macro into a functionLioncash1-37/+36
This can just be a regular function, getting rid of the need to also explicitly undef the define at the end of the file. Given FuncReturn() was already converted into a function, it's #undef can also be removed.
2018-09-18arm_dynarmic: Correct ExclusiveWrite128()'s operationLioncash1-2/+2
Previously the second half of the value being written would overwrite the first half. Thankfully this wasn't a bug that was being encountered, as the function is currently unused.
2018-09-18arm_interface: Remove ARM11-isms from the CPU interfaceLioncash7-99/+86
This modifies the CPU interface to more accurately match an AArch64-supporting CPU as opposed to an ARM11 one. Two of the methods don't even make sense to keep around for this interface, as Adv Simd is used, rather than the VFP in the primary execution state. This is essentially a modernization change that should have occurred from the get-go.
2018-09-18kernel/mutex: Replace ResultCode construction for invalid addresses with the named variantLioncash1-2/+2
We already have a ResultCode constant for the case of an invalid address, so we can just use it instead of re-rolling that ResultCode type.
2018-09-18kernel/svc: Handle error cases for svcArbitrateLock() and svcArbitrateUnlock()Lioncash1-0/+8
The kernel does the equivalent of the following check before proceeding: if (address + 0x8000000000 < 0x7FFFE00000) { return ERR_INVALID_MEMORY_STATE; } which is essentially what our IsKernelVirtualAddress() function does. So we should also be checking for this. The kernel also checks if the given input addresses are 4-byte aligned, however our Mutex::TryAcquire() and Mutex::Release() functions already handle this, so we don't need to add code for this case.
2018-09-18Implemented Internal FlagsFernandoS271-13/+35
2018-09-18gl_shader_decompiler: Avoid truncation warnings within LD_A and ST_A codeLioncash1-4/+4
These are internally stored as u64 values, so using u32 here causes truncation warnings. Instead, we can just use u64 and preserve the bit width.
2018-09-18core/core_cpu: Replace exclusive monitor include with forward declarationLioncash2-2/+6
We don't need to include this as a dependency within the header. A regular forward declaration will suffice here.
2018-09-17Implemented I2I.CC on the NEU control code, used by SMOFernandoS272-14/+18
2018-09-17Implemented CSETPFernandoS272-14/+49
2018-09-17Implemented Control CodesFernandoS272-0/+51
2018-09-17time_stretch: Remove unused <array> includeLioncash1-1/+0
This isn't used within this header and isn't necessary.
2018-09-17stream: Replace includes with forward declarations where applicableLioncash2-3/+7
Avoids propagating includes in headers where it's not necessary to do so.
2018-09-17audio_renderer: Replace includes with forward declarations where applicableLioncash2-39/+52
Avoids including unnecessary headers within the audio_renderer.h header, lessening the likelihood of needing to rebuild source files including this header if they ever change. Given std::vector allows forward declaring contained types, we can move VoiceState to the cpp file and hide the implementation entirely.
2018-09-17Added asserts for texture misc modes to texture instructionsFernandoS271-2/+45
2018-09-17Added texture misc modes to texture instructionsFernandoS271-1/+147
2018-09-17Add 1D sampler for TLDS - TexelFetch (Mario Rabbids)raven021-7/+12
2018-09-17yuzu/util: Antialias game list compatibility pixmapsLioncash1-1/+2
We pass a hint to the QPainter instance that we want anti-aliasing on the compatibility icons, which prevents the circles from looking fairly jagged, and actually makes them look circular.
2018-09-17game_list_p: Amend typo in GameListItemCompat's constructor parameterLioncash1-4/+4
Adds a missing 'i' character that was missing in compatibility.
2018-09-17game_list_p: Take map iterator contents by const referenceLioncash1-1/+1
We don't need to copy the whole struct in this instance, we can just utilize a reference instead.
2018-09-16Implement ASTC_2D_8X8 (Bayonetta 2)raven023-6/+20
2018-09-15Implement RenderTargetFormat::BGR5A1_UNORM (Pokken Tournament DX)raven022-0/+4
2018-09-15Shaders: Implemented multiple-word loads and stores to and from attribute memory.Subv2-7/+58
This seems to be an optimization performed by nouveau.
2018-09-15Port # #4192 from Citra: "svc: change unknown to thread in CreateThread"Valentin Vanelslande1-1/+1
2018-09-15Tests: Remove glad test OS X work-aroundYuri Kunde Schlesner2-16/+0
2018-09-15Port #4182 from Citra: "Prefix all size_t with std::"fearlessTobi146-751/+780
2018-09-14Optimized Texture SwizzlingFernandoS271-2/+49
2018-09-14cubeb_sink: Get rid of variable shadowing within CubebSink's constructorLioncash1-4/+4
The parameter of the lambda was shadowing the variable that was being assigned to.
2018-09-14cubeb_sink: Correct context name in ListCubebSinkDevices()Lioncash1-1/+1
This ain't Citra.
2018-09-14services/sm: Amend error code constantsLioncash2-8/+6
Courtesy of @ogniK5377. This also moves them into the cpp file and limits the visibility to where they're directly used. It also gets rid of unused or duplicate error codes.
2018-09-14kernel/svc: Sanitize creation of shared memory via svcCreateSharedMemory()Lioncash1-2/+18
The kernel caps the size limit of shared memory to 8589930496 bytes (or (1GB - 512 bytes) * 8), so approximately 8GB, where every GB has a 512 byte sector taken off of it. It also ensures the shared memory is created with either read or read/write permissions for both permission types passed in, allowing the remote permissions to also be set as "don't care".
2018-09-14kernel/svc: Sanitize addresses, permissions, and sizes within svcMapSharedMemory() and svcUnmapSharedMemory()Lioncash1-17/+25
Part of the checking done by the kernel is to check if the given address and size are 4KB aligned, as well as checking if the size isn't zero. It also only allows mapping shared memory as readable or read/write, but nothing else, and so we shouldn't allow mapping as anything else either.
2018-09-14gl_shader_decompiler: Get rid of variable shadowing within LEA instructionsLioncash1-2/+0
These variables are already defined within an outer scope.
2018-09-14kernel/svc: Sanitize addresses and sizes within svcMapMemory() and svcUnmapMemory()Lioncash1-0/+23
The kernel checks if the addresses and given size is 4KB aligned before continuing onwards to map the memory.
2018-09-14kernel/svc: Sanitize heap sizes within svcSetHeapSize()Lioncash2-0/+8
The kernel checks if the given size is a multiple of 2MB and <= to 4GB before going ahead and attempting to allocate that much memory.
2018-09-14audio_core/time_stretch: Silence truncation warnings in Process()Lioncash1-2/+2
The SoundTouch API only accepts uint amount of samples.
2018-09-13kernel/errors: Amend error code for ERR_NOT_FOUNDLioncash1-1/+2
This is the value returned by the kernel for svcConnectToNamedPort() if the named port cannot be found.
2018-09-13service/vi: Replace includes with forward declarations where applicableLioncash3-7/+9
2018-09-13kernel/thread: Include thread-related enums within the kernel namespaceLioncash5-38/+39
Previously, these were sitting outside of the Kernel namespace, which doesn't really make sense, given they're related to the Thread class which is within the Kernel namespace.
2018-09-13service: Use nested namespace specifiers where applicableLioncash3-12/+6
There were a few places where nested namespace specifiers weren't being used where they could be within the service code. This amends that to make the namespacing a tiny bit more compact.
2018-09-13ipc: minor fixValentin Vanelslande1-1/+1
2018-09-13Use ARB_multi_bind for uniform buffers (#1287)ReinUsesLisp4-3/+27
* gl_rasterizer: use ARB_multi_bind for uniform buffers * address feedback
2018-09-13services/pl_u: Add missing Korean font to the fallback case for shared fontsLioncash1-2/+4
Previously this wasn't using the Korean font at all.
2018-09-13gl_rasterizer_cache: B5G6R5U should use GL_RGB8 as an internal format.bunnei1-1/+1
- Fixes a regression with Sonic Mania with ARB_texture_storage.
2018-09-12GPU: Basic implementation of the Kepler Inline Memory engine (p2mf).Subv6-0/+146
This engine writes data from a FIFO register into the configured address.
2018-09-12audio_core: Flush stream when not playing anythingMerryMage6-0/+23
2018-09-12Implemented Texture Processing ModesFernandoS272-1/+43
2018-09-12svc: Return ERR_INVALID_PROCESSOR_ID in CreateThread() if an invalid processor ID is givenLioncash1-2/+2
This is what the kernel does for an out-of-range processor ID.
2018-09-12kernel/errors: Correct error codes for invalid thread priority and invalid processor IDLioncash3-7/+9
2018-09-12svc: Do nothing if svcOutputDebugString() is given a length of zeroLioncash1-0/+4
While unlikely, it does avoid constructing a std::string and unnecessarily calling into the memory code if a game or executable decides to be really silly about their logging.
2018-09-12svc: Correct parameter type for OutputDebugString()Lioncash2-3/+3
This should be a u64 to represent size.
2018-09-12yuzu/configure_gamelist: Make combo box strings translatableLioncash2-21/+47
Given these are shown to the user, they should be translatable. While we're at it, also set up the dialog to automatically retranslate the dialog along with the combo boxes if it receives a LanguageChange event.
2018-09-12yuzu/configure_gamelist: Use std::array instead of std::vector for translatable stringsLioncash1-6/+9
We don't need to use an allocating container for these, given we know the fixed amount of strings being used. This is just a waste of memory.
2018-09-12yuzu/configure_gamelist: Move combo box initializtion to their own functionsLioncash2-23/+32
Keeps the individual initialization of the combo boxes logically separate. We also shouldn't be dumping this sort of thing in the constructor directly.
2018-09-12gl_rasterizer_cache: Always blit on recreate, regardless of format.bunnei1-6/+10
- Fixes several rendering issues with Super Mario Odyssey.
2018-09-12game_list: Resolve variable shadowing within LoadCompatibilityList()Lioncash1-3/+3
"value" is already a used variable name within the outermost ranged-for loop, so this variable was shadowing the outer one. This isn't a bug, but it will get rid of a -Wshadow warning.
2018-09-12game_list: Use QJsonValueRef() within LoadCompatibilityList()Lioncash1-2/+2
This way, we aren't constructing unnecessary QJsonValue instances.
2018-09-12service/audio: Replace includes with forward declarations where applicableLioncash7-17/+34
A few headers were including other headers when a forward declaration can be used instead, allowing the include to be moved to the cpp file.
2018-09-12audio_core/sink_details: Change std::string parameter into std::string_viewLioncash2-2/+4
The given string is only ever used for lookup and comparison, so we can just utilize a non-owning view to string data here
2018-09-12pl_u: Eliminate mutable file-scope stateLioncash2-66/+88
Converts the PL_U internals to use the PImpl idiom and makes the state part of the Impl struct, eliminating mutable global/file state.
2018-09-12service/prepo: Move class into the cpp fileLioncash2-39/+40
This doesn't need to be exposed within the header and be kept in the translation unit, eliminating the need to include anything within the header.
2018-09-12gl_shader_cache: Remove cache_width/cache_height.bunnei2-12/+2
- This was once an optimization, but we no longer need it with the cache reserve. - This is also inaccurate.
2018-09-11gl_rasterizer: Use ARB_texture_storage.Markus Wick3-11/+12
It allows us to use texture views and it reduces the overhead within the GPU driver. But it disallows us to reallocate the texture, but we don't do so anyways. In the end, it is the new way to allocate textures, so there is no need to use the old way.
2018-09-11Implemented LEA and PSETFernandoS271-0/+91
2018-09-11Implemented encodings for LEA and PSETFernandoS271-0/+64
2018-09-11Replace old FragmentHeader for the new HeaderFernandoS272-31/+18
2018-09-11Implemented (Partialy) Shader HeaderFernandoS273-2/+102
2018-09-11externals: Place font data within cpp filesLioncash1-6/+6
This places the font data within cpp files, which mitigates the possibility of the font data being duplicated within the binary if it's referred to in more than one translation unit in the future. It also stores the data within a std::array, which is more flexible when it comes to operating with the standard library. Furthermore, it makes the data arrays const. This is what we want, as it allows the compiler to store the data within the read-only segment. As it is, having several large sections of mutable data like this just leaves spots in memory that we can accidentally write to (via accidental overruns, what have you) and actually have it work. This ensures the font data remains the same no matter what.
2018-09-11hle/service: Default constructors and destructors in the cpp file where applicableLioncash148-45/+291
When a destructor isn't defaulted into a cpp file, it can cause the use of forward declarations to seemingly fail to compile for non-obvious reasons. It also allows inlining of the construction/destruction logic all over the place where a constructor or destructor is invoked, which can lead to code bloat. This isn't so much a worry here, given the services won't be created and destroyed frequently. The cause of the above mentioned non-obvious errors can be demonstrated as follows: ------- Demonstrative example, if you know how the described error happens, skip forwards ------- Assume we have the following in the header, which we'll call "thing.h": \#include <memory> // Forward declaration. For example purposes, assume the definition // of Object is in some header named "object.h" class Object; class Thing { public: // assume no constructors or destructors are specified here, // or the constructors/destructors are defined as: // // Thing() = default; // ~Thing() = default; // // ... Some interface member functions would be defined here private: std::shared_ptr<Object> obj; }; If this header is included in a cpp file, (which we'll call "main.cpp"), this will result in a compilation error, because even though no destructor is specified, the destructor will still need to be generated by the compiler because std::shared_ptr's destructor is *not* trivial (in other words, it does something other than nothing), as std::shared_ptr's destructor needs to do two things: 1. Decrement the shared reference count of the object being pointed to, and if the reference count decrements to zero, 2. Free the Object instance's memory (aka deallocate the memory it's pointing to). And so the compiler generates the code for the destructor doing this inside main.cpp. Now, keep in mind, the Object forward declaration is not a complete type. All it does is tell the compiler "a type named Object exists" and allows us to use the name in certain situations to avoid a header dependency. So the compiler needs to generate destruction code for Object, but the compiler doesn't know *how* to destruct it. A forward declaration doesn't tell the compiler anything about Object's constructor or destructor. So, the compiler will issue an error in this case because it's undefined behavior to try and deallocate (or construct) an incomplete type and std::shared_ptr and std::unique_ptr make sure this isn't the case internally. Now, if we had defaulted the destructor in "thing.cpp", where we also include "object.h", this would never be an issue, as the destructor would only have its code generated in one place, and it would be in a place where the full class definition of Object would be visible to the compiler. ---------------------- End example ---------------------------- Given these service classes are more than certainly going to change in the future, this defaults the constructors and destructors into the relevant cpp files to make the construction and destruction of all of the services consistent and unlikely to run into cases where forward declarations are indirectly causing compilation errors. It also has the plus of avoiding the need to rebuild several services if destruction logic changes, since it would only be necessary to recompile the single cpp file.
2018-09-11Fixed renderdoc input/output textures not working due to render targetsDavid Marcec2-2/+9
2018-09-11Use open-source shared fonts if no dumped file is available (#1269)Tobias2-2/+26
* Add open-source shared fonts * Address review comments
2018-09-11Port #4141 from citra: Joystick hotplug support (#1275)Tobias7-101/+339
* Joystick hotplug support (#4141) * use SDL_PollEvent instead of SDL_JoystickUpdate Register hot plugged controller by GUID if they were configured in a previous session * Move SDL_PollEvent into its own thread * Don't store SDLJoystick pointer in Input Device; Get pointer on each GetStatus call * Fix that joystick_list gets cleared after SDL_Quit * Add VirtualJoystick for InputDevices thats never nullptr * fixup! Add VirtualJoystick for InputDevices thats never nullptr * fixup! fixup! Add VirtualJoystick for InputDevices thats never nullptr * Remove SDL_GameController, make SDL_Joystick* unique_ptr * fixup! Remove SDL_GameController, make SDL_Joystick* unique_ptr * Adressed feedback; fixed handling of same guid reconnects * fixup! Adressed feedback; fixed handling of same guid reconnects * merge the two joystick_lists into one * make SDLJoystick a member of VirtualJoystick * fixup! make SDLJoystick a member of VirtualJoystick * fixup! make SDLJoystick a member of VirtualJoystick * fixup! fixup! make SDLJoystick a member of VirtualJoystick * SDLJoystick: Addressed review comments * Address one missed review comment
2018-09-10video_core: Refactor command_processor.Markus Wick2-44/+42
Inline the WriteReg helper as it is called ~20k times per frame.
2018-09-10video_core: Move command buffer loop.Markus Wick5-77/+84
This moves the hot loop into video_core. This refactoring shall reduce the CPU overhead of calling ProcessCommandList.
2018-09-10Remove multicore configure_general.uiMysticExile1-7/+0
2018-09-10remove multicore in configure_general.cppMysticExile1-3/+0
2018-09-10rasterizer: Drop unused handler.Markus Wick4-8/+0
This virtual function is called in a very hot spot, and it does nothing. If this kind of feature is required, please be more specific and add callbacks in the switch statement within Maxwell3D::WriteReg. There is no point in having another switch statement within the rasterizer.
2018-09-10gl_rasterizer_cache: Only use depth for applicable texture formats.bunnei1-6/+22
- Fixes an issue with Octopath Traveler leaving stale data here.
2018-09-10gl_rasterizer: Implement clear for non-zero render targets.bunnei2-50/+66
- Several misc. changes to ConfigureFramebuffers in support of this.
2018-09-10gl_rasterizer_cache: Implement RenderTargetFormat::BGRA8_SRGB.bunnei3-0/+4
- Used by Octopath Traveler (with multiple render targets).
2018-09-10gl_rasterizer: Implement multiple color attachments.bunnei5-132/+95
2018-09-10service: Remove unused g_kernel_named_ports variableLioncash1-2/+0
With the named port functionality all migrated over to the kernel, there's no need to keep this around anymore.
2018-09-10Implemented TMMLFernandoS272-5/+67
2018-09-10game_list: Make CompatibilityList parameter of NavigateToGamedbEntryRequested() a const referenceLioncash3-3/+5
The compatibility list isn't modified within any of the slots connected to this signal, so we can make it const to enforce immutability.
2018-09-10yuzu: Move compatibility list specifics to their own source filesLioncash10-33/+54
Lets us keep the generic portions of the compatibility list code together, and allows us to introduce a type alias that makes it so we don't need to type out a very long type declaration anymore, making the immediate readability of some code better.
2018-09-09Implemented TXQ dimension query type, used by SMO.FernandoS272-1/+36
2018-09-09video_core: fixed arithmetic overflow warnings & improved code stylePatrick Elsässer5-89/+101
- Fixed all warnings, for renderer_opengl items, which were indicating a possible incorrect behavior from integral promotion rules and types larger than those in which arithmetic is typically performed. - Added const for variables where possible and meaningful. - Added constexpr where possible.
2018-09-09cubeb_sink: Downsample arbitrary number of channelsMerryMage1-10/+9
2018-09-09Port Citra #4047 & #4052: add change background color supporttech4me6-0/+46
2018-09-09hid: Implement ReloadInputDevicesfearlessTobi2-4/+6
2018-09-09Change name of TEXQ to TXQ, in order to match NVIDIA's namingFernandoS271-2/+2
2018-09-08GPU/DMA: Partially implemented the 'enable_2d' bit in the DMA engine.Subv1-2/+10
When not set, this tells the GPU to only use the X size when performing a DMA copy. This is only implemented for linear->linear and tiled->tiled copies. Conversion copies still retain the assert. This bit is unset by some games for various purposes, and by nouveau when copying the vertex buffers.
2018-09-08cubeb_sink: Perform audio stretchingMerryMage3-24/+26
2018-09-08audio_core: Add audio stretcherMerryMage3-0/+101
2018-09-08cubeb_sink: Hold last available value instead of writing zerosMerryMage1-5/+15
This reduces clicking in output audio should we underrun.
2018-09-08cubeb_sink: Use RingBufferMerryMage1-40/+26
2018-09-08common: Implement a ring bufferMerryMage4-0/+243
2018-09-08Add audio stretching supportfearlessTobi12-0/+43
2018-09-08audio_renderer: Rename AudioOut instance to audio_outMerryMage2-7/+7
2018-09-08yuzu: fix title bar displayPengfei Zhu1-2/+2
Previously the version number got hidden after starting a game.
2018-09-08gl_rasterizer: Use baseInstance instead of moving the buffer points.bunnei3-21/+29
This hopefully helps our cache not to redundant upload the vertex buffer. # Conflicts: # src/video_core/renderer_opengl/gl_rasterizer.cpp
2018-09-08yuzu-cmd: fix SDL loggingtgsm1-2/+3
2018-09-08video_core: Arithmetic overflow warning fix for gl_rasterizer (#1262)Patrick Elsässer1-12/+14
* video_core: Arithmetic overflow fix for gl_rasterizer - Fixed warnings, which were indicating incorrect behavior from integral promotion rules and types larger than those in which arithmetic is typically performed. - Added const for variables where possible and meaningful. * Changed the casts from C to C++ style Changed the C-style casts to C++ casts as proposed. Took also care about signed / unsigned behaviour.
2018-09-08gl_rasterizer_cache: Improve accuracy of RecreateSurface for non-2D textures.bunnei2-27/+45
2018-09-08maxwell_3d: Remove assert that no longer applies.bunnei1-4/+0
2018-09-08gl_rasterizer_cache: Partially implement several non-2D texture types.bunnei1-30/+111
2018-09-08gl_shader_decompiler: Partially implement several non-2D texture types (Subv).bunnei2-32/+143
2018-09-08gl_rasterizer: Implement texture wrap mode p.bunnei2-2/+8
2018-09-08gl_rasterizer_cache: Track texture depth.bunnei3-4/+15
2018-09-08gl_rasterizer_cache: Remove impl. of FlushGLBuffer.bunnei1-34/+1
- Will not work for non-2d textures, and was not used anyways.
2018-09-08gl_rasterizer_cache: Keep track of texture type per surface.bunnei3-32/+84
2018-09-08gl_rasterizer_cache: Remove unused DownloadGLTexture.bunnei2-51/+0
2018-09-08gl_state: Keep track of texture target.bunnei5-26/+28
2018-09-07yuzu: Move GameListWorker to its own source filesLioncash5-286/+324
This has gotten sufficiently large enough to warrant moving it to its own source files. Especially given it dumps the file_sys headers around code that doesn't use it for the most part. This'll also make it easier to introduce a type alias for the compatibility list, so a large unordered_map type declaration doesn't need to be specified all the time (we don't want to propagate the game_list_p.h include via the main game_list.h header).
2018-09-07For SDL FrontendCaptV0rt3x1-2/+2
2018-09-07Better Title Bar DisplayCaptV0rt3x5-8/+28
2018-09-07core: Migrate current_process pointer to the kernelLioncash4-5/+34
Given we now have the kernel as a class, it doesn't make sense to keep the current process pointer within the System class, as processes are related to the kernel. This also gets rid of a subtle case where memory wouldn't be freed on core shutdown, as the current_process pointer would never be reset, causing the pointed to contents to continue to live.
2018-09-06gl_rasterizer: Call state.Apply only once on SetupShaders.bunnei1-4/+2
2018-09-06gl_shader_decompiler: Implement saturate mode for IPA.bunnei1-1/+5
2018-09-06gl_buffer_cache: Default initialize member variablesLioncash1-3/+3
Ensures that the cache always has a deterministic initial state.
2018-09-06gl_buffer_cache: Make GetHandle() a const member functionLioncash2-2/+2
GetHandle() internally calls GetHandle() on the stream_buffer instance, which is a const member function, so this can be made const as well.
2018-09-06gl_buffer_cache: Remove unnecessary includesLioncash2-2/+4
2018-09-06gl_buffer_cache: Make constructor explicitLioncash1-1/+1
Implicit conversions during construction isn't desirable here.
2018-09-06video_core/CMakeLists: Add missing gl_buffer_cache.hLioncash1-0/+1
Without this, the header file won't show up by default within IDEs such as Visual Studio.
2018-09-06core/core: Remove unnecessary sm/controller includeLioncash5-2/+5
The only reason this include was necessary, was because the constructor wasn't defaulted in the cpp file and the compiler would inline it wherever it was used. However, given Controller is forward declared, all those inlined constructors would see an incomplete type, causing a compilation failure. So, we just place the constructor in the cpp file, where it can see the complete type definition, allowing us to remove this include.
2018-09-06file_sys/nca_patch: Amend constructor initializer list orderLioncash1-2/+2
Orders the elements in the initializer list in the order they're specified in the class. This prevents compiler warnings about initialization order.
2018-09-06file_sys/nca_patch: Remove unnecessary includesLioncash2-2/+9
romfs.h doesn't need to be included in the header, the only real dependency here is common's swap.h that needs to be included.
2018-09-06file_sys/patch_manager: Add missing includesLioncash2-0/+5
These includes were previously being satisfied indirectly.
2018-09-06frontend: Set swap interval to 0fearlessTobi2-0/+2
2018-09-06gl_shader_gen: Initialize position.Markus Wick1-0/+1
IMO the old code is fine, but nvidia raises shader compiler warnings. Trivial fix through...
2018-09-06Implemented IPA ProperlyFernandoS272-47/+98
2018-09-05gl_rasterizer: Skip TODO log.Markus Wick1-1/+1
This is called ~3k times per frame in SMO ingame. My laptop spends ~3ms per frame on allocating and freeing this string. Let's just stop printing this kind of redundant information.
2018-09-05file_sys/submission_package: Correct constructor initialization list orderLioncash1-2/+2
Orders the elements in the sequence to match the order in which they'll actually be initialized in.
2018-09-05gl_rasterizer: Implement a VAO cache.Markus Wick3-53/+60
This patch caches VAO objects instead of re-emiting all pointers per draw call. Configuring this pointers is known as a fast task, but it yields too many GL calls. So for better performance, just bind the VAO instead of 16 pointers.
2018-09-05file_sys/submission_package: Replace includes with forward declarations where applicableLioncash2-6/+15
2018-09-05renderer_opengl: Implement a buffer cache.Markus Wick5-86/+182
The idea of this cache is to avoid redundant uploads. So we are going to cache the uploaded buffers within the stream_buffer and just reuse the old pointers. The next step is to implement a VBO cache on GPU memory, but for now, I want to check the overhead of the cache management. Fetching the buffer over PCI-E should be quite fast.
2018-09-04bktr: Fix bucket overlap errorZach Hilman8-9/+11
2018-09-04drd: Parse title ID from program metadataZach Hilman2-4/+29
2018-09-04patch_manager: Centralize Control-type NCA parsingZach Hilman6-80/+89
2018-09-04nsp: Fix error masking issue with XCI filesZach Hilman3-6/+13
Now display correct error instead of catch-all MissingProgramNCA
2018-09-04game_list: Fix version display on non-NAND titlesZach Hilman4-30/+52
2018-09-04bktr: Add logging on successful patchZach Hilman3-7/+24
2018-09-04game_list: Use friendly game versionsZach Hilman1-13/+32
Mainly, from control.nacp metadata instead of cnmt metadata
2018-09-04bktr: Implement IVFC offset shiftingZach Hilman8-8/+36
Fixes base game read errors
2018-09-04bktr: Fix missing includes and optimize styleZach Hilman12-103/+109
2018-09-04main: Make game updates installableZach Hilman1-1/+5
2018-09-04game_list: Display patch names and versions on listZach Hilman2-0/+27
2018-09-04loader: Add BKTR-specific error messages and codesZach Hilman3-7/+28
2018-09-04loader: Ignore patches on NRO and DRDZach Hilman4-0/+11
2018-09-04patch_manager: Add usages of patches to ExeFSZach Hilman5-9/+41
2018-09-04file_sys: Add class to manage game patchesZach Hilman2-0/+132
Right now only includes Updates, but should eventually contain all of the other patches we need.
2018-09-04file_sys: Add BKTR patching mechanismZach Hilman2-0/+352
2018-09-04content_archive: Add BKTR header parsing to NCAZach Hilman2-19/+160
2018-09-04registration: Add RegisteredCacheUnionZach Hilman4-0/+164
Aggregates multiple caches into one interface
2018-09-04game_list: Use RegisteredCacheUnion for installedZach Hilman3-5/+3
Reduces code
2018-09-04aes_util: Fix error involving reads of less than 0x10Zach Hilman1-0/+14
Issues with block size are fixed by making all reads minimum length of 0x10
2018-09-04gl_shader_cache: Use an u32 for the binding point cache.Markus Wick4-15/+23
The std::string generation with its malloc and free requirement was a noticeable overhead. Also switch to an ordered_map to avoid the std::hash call. As those maps usually have a size of two elements, the lookup time shall not matter.
2018-09-04main: Only show DRD deprecation warning onceZach Hilman7-6/+19
2018-09-04control_metadata: Use alternate language names if AmericanEnglish isn't availableZach Hilman2-4/+17
2018-09-04card_image: Add program title ID getterZach Hilman2-0/+6
2018-09-04qt: Add deprecation warnings for DRD formatZach Hilman1-0/+10
2018-09-04registration: Fix NSP installation errorsZach Hilman1-1/+1
2018-09-04nsp: Comply with style and performance guidelinesZach Hilman7-29/+48
2018-09-04qt: Add UI support for NSP filesZach Hilman3-2/+7
2018-09-04registration: Add support for installing NSP filesZach Hilman3-16/+34
2018-09-04loader: Add AppLoader for NSP filesZach Hilman2-0/+182
2018-09-04card_image: Parse XCI secure partition with NSPZach Hilman4-11/+38
Eliminated duplicate code and adds support for Rev1+ carts
2018-09-04file_sys: Add Nintendo Submission Package (NSP)Zach Hilman2-0/+296
2018-09-04drd: Load title ID from program metadataZach Hilman1-3/+1
Previously only loaded from control metadata
2018-09-04loader: Add NSP file type and NSP-specific errorsZach Hilman2-2/+14
2018-09-04key_manager: Avoid autogeneration if key existsZach Hilman1-3/+13
2018-09-04common/logging: Amend documentation commentsLioncash2-6/+6
Multi-line doc comments still need the '<' after the ///, otherwise it's treated as a regular comment and makes the original doc comment broken in viewers, IDEs, etc. While we're at it, also fix some typos in the comments.
2018-09-04common/logging/filter: Replace C-style case with C++ static_castLioncash1-1/+1
2018-09-04common/logging/filter: Make constructor explicitLioncash1-1/+1
Implicit conversions aren't desirable here.
2018-09-04core: Use a raw pointer in GetGPUDebugContext.Markus Wick2-3/+3
This helper is called very often. The memory ownership shall not be transfered, so just return the raw pointer.
2018-09-04command_processor: Use std::array for bound_engines.Markus Wick2-4/+4
subchannel is a 3 bit field. So there must not be more than 8 bound engines. And using a hashmap for up to 8 values is a bit overpowered.
2018-09-04Update microprofile scopes.Markus Wick4-5/+21
Blame the subsystems which deserve the blame :) The updated list is not complete, just the ones I've spotted on random sampling the stack trace.
2018-09-04file_sys: Replace includes with forward declarations where applicableLioncash22-27/+64
Cuts down on include dependencies, resulting in less files that need to be rebuilt when certain things are changed.
2018-09-04qt: Add message about not moving contents on dir changeZach Hilman2-6/+23
2018-09-04qt: Add UI options to change NAND/SD dirsZach Hilman3-0/+36
2018-09-04settings: Save and load NAND/SD dirs from configZach Hilman3-0/+26
2018-09-02gl_shader_decompiler: Use used_shaders member variable directly within GenerateDeclarations()Lioncash1-1/+1
Using the getter function intended for external code here makes an unnecessary copy of the already-accessible used_shaders vector.
2018-09-02vfs_real: Forward declare IOFileLioncash13-15/+45
Eliminates the need to rebuild some source files if the file_util header ever changes. This also uncovered some indirect inclusions, which have also been fixed.
2018-09-02service: Migrate global named port map to the KernelCore classLioncash5-19/+51
Now that we have a class representing the kernel in some capacity, we now have a place to put the named port map, so we move it over and get rid of another piece of global state within the core.
2018-09-02ssl: Move SSL class to cpp fileLioncash2-37/+39
This isn't required to be visible to anything outside of the main source file, and will eliminate needing to rebuild anything else including the header if the SSL class needs to be changed in the future.
2018-09-02filesystem: Move dir retrieval after path checking in DeleteFile()Lioncash1-2/+5
We don't need to do the lookup if the path is considered empty currently.
2018-09-01citra_qt: Display the unsupported GL extensions in the popupfearlessTobi2-8/+10
2018-09-01Removed saturate assertDavid Marcec2-2/+0
Unneeded as we already implement it
2018-09-01Removed saturate assertDavid Marcec2-2/+0
Saturate already implemented
2018-09-01Changed tab5980_0 default from 0 -> 1David Marcec1-2/+2
2018-09-01Added FMUL assertsDavid Marcec2-0/+15
2018-09-01Added FFMA assertsDavid Marcec2-0/+11
2018-09-01Added assert for TEXS nodepDavid Marcec2-0/+3
2018-09-01Added better asserts to IPA, Renamed IPA modes to match mesaDavid Marcec2-6/+13
IpaMode is changed to IpaInterpMode IpaMode is suppose to be 2 bits not 3 Added IpaSampleMode Added Saturate Renamed modes based on https://github.com/mesa3d/mesa/blob/d27c7918916cdc8092959124955f887592e37d72/src/gallium/drivers/nouveau/codegen/nv50_ir_emit_gm107.cpp#L2530
2018-09-01maxwell_3d: Use CoreTiming for query timestampZach Hilman1-2/+3
2018-09-01filesystem: Implement OpenReadOnlySaveDataFilesystemZach Hilman2-1/+7
2018-09-01filesystem: Add OpenFileSystemWithPatchZach Hilman2-1/+23
2018-08-31core/core: Replace includes with forward declarations where applicableLioncash29-66/+185
The follow-up to e2457418dae19b889b2ad85255bb95d4cd0e4bff, which replaces most of the includes in the core header with forward declarations. This makes it so that if any of the headers the core header was previously including change, then no one will need to rebuild the bulk of the core, due to core.h being quite a prevalent inclusion. This should make turnaround for changes much faster for developers.
2018-08-31gl_rasterizer_cache: Use accurate framebuffer setting for accurate copies.bunnei2-73/+54
2018-08-31gl_rasterizer_cache: Also use reserve cache for RecreateSurface.bunnei2-24/+18
2018-08-31rasterizer_cache: Use boost::interval_map for a more accurate cache.bunnei1-33/+45
2018-08-31gl_renderer: Cache textures, framebuffers, and shaders based on CPU address.bunnei11-138/+70
2018-08-31gl_rasterizer: Fix issues with the rasterizer cache.bunnei4-46/+57
- Use a single cached page map. - Fix calculation of ending page.
2018-08-31Implement BC6H_UF16 & BC6H_SF16 (#1092)greggameplayer3-31/+55
* Implement BC6H_UF16 & BC6H_SF16 Require by ARMS * correct coding style * correct coding style part 2
2018-08-31core: Make the main System class use the PImpl idiomLioncash5-279/+387
core.h is kind of a massive header in terms what it includes within itself. It includes VFS utilities, kernel headers, file_sys header, ARM-related headers, etc. This means that changing anything in the headers included by core.h essentially requires you to rebuild almost all of core. Instead, we can modify the System class to use the PImpl idiom, which allows us to move all of those headers to the cpp file and forward declare the bulk of the types that would otherwise be included, reducing compile times. This change specifically only performs the PImpl portion.
2018-08-31Report correct shader size.Markus Wick1-1/+1
Seems like this was an oversee in regards to 1fd979f50a9f4c21fa8cafba7268d959e3076924 It changed GLShader::ProgramCode to a std::vector, so sizeof is wrong.
2018-08-31Added predicate comparison GreaterEqualWithNanHexagon122-3/+4
2018-08-31gl_shader_decompiler: Implement POPC (#1203)Laku2-0/+19
* Implement POPC * implement invert
2018-08-29Shaders: Implemented IADD3tech4me2-1/+84
2018-08-29Show game compatibility within yuzufearlessTobi8-3/+174
2018-08-29gl_shader_decompiler: Improve IPA for Pass mode with Position attribute.bunnei2-1/+39
2018-08-29kernel: Eliminate kernel global stateLioncash54-442/+671
As means to pave the way for getting rid of global state within core, This eliminates kernel global state by removing all globals. Instead this introduces a KernelCore class which acts as a kernel instance. This instance lives in the System class, which keeps its lifetime contained to the lifetime of the System class. This also forces the kernel types to actually interact with the main kernel instance itself instead of having transient kernel state placed all over several translation units, keeping everything together. It also has a nice consequence of making dependencies much more explicit. This also makes our initialization a tad bit more correct. Previously we were creating a kernel process before the actual kernel was initialized, which doesn't really make much sense. The KernelCore class itself follows the PImpl idiom, which allows keeping all the implementation details sealed away from everything else, which forces the use of the exposed API and allows us to avoid any unnecessary inclusions within the main kernel header.
2018-08-28gl_shader_cache: Remove unused program_code vector in GetShaderAddress()Lioncash1-2/+1
Given std::vector is a type with a non-trivial destructor, this variable cannot be optimized away by the compiler, even if unused. Because of that, something that was intended to be fairly lightweight, was actually allocating 32KB and deallocating it at the end of the function.
2018-08-28gpu: Make memory_manager privateLioncash7-26/+40
Makes the class interface consistent and provides accessors for obtaining a reference to the memory manager instance. Given we also return references, this makes our more flimsy uses of const apparent, given const doesn't propagate through pointers in the way one would typically expect. This makes our mutable state more apparent in some places.
2018-08-28gl_rasterizer: Remove unused variablesLioncash1-2/+0
2018-08-28hle/result: Make ResultVal's move constructor as noexceptLioncash1-1/+1
Many containers within the standard library provide different behaviors based on whether or not a move constructor/assignment operator can be guaranteed not to throw or not. Notably, implementations will generally use std::move_if_noexcept (or an internal implementation of it) to provide strong exception guarantees. If a move constructor potentially throws (in other words, is not noexcept), then certain behaviors will create copies, rather than moving the values. For example, consider std::vector. When a std::vector calls resize(), there are two ways the elements can be relocated to the new block of memory (if a reallocation happens), by copy, or by moving the existing elements into the new block of memory. If a type does not have a guarantee that it will not throw in the move constructor, a copy will happen. However, if it can be guaranteed that the move constructor won't throw, then the elements will be moved. This just allows ResultVal to be moved instead of copied all the time if ever used in conjunction with containers for whatever reason.
2018-08-28Fix two stupid errors made in #1141fearlessTobi2-1/+2
2018-08-28yuzu: Fix stick UI direction orderfearlessTobi1-2/+2
2018-08-28renderer_opengl: Implement a new shader cache.bunnei9-285/+250
2018-08-28gl_rasterizer_cache: Update to use RasterizerCache base class.bunnei3-132/+20
2018-08-28video_core: Add RasterizerCache class for common cache management code.bunnei2-0/+117
2018-08-27vfs_real: Remove unused variable in CreateDirectoryRelative()Lioncash1-1/+0
2018-08-27registered_cache: Get rid of variable shadowing in ProcessFiles()Lioncash1-3/+3
Prevents compiler warnings.
2018-08-26set: Fixed GetAvailableLanguageCodes() to follow the max_entriestech4me2-8/+45
Rightnow, in games use GetAvailableLanguageCodes(), there is a WriteBuffer() with size larger than the buffer_size. (Core Critical core\hle\kernel\hle_ipc.cpp:WriteBuffer:296: size (0000000000000088) is greater than buffer_size (0000000000000078)) 0x88 = 17(languages) * 8 0x78 = 15(languages) * 8 GetAvailableLanguageCodes() can only support 15 languages. After firmware 4.0.0 there are 17 supported language instead of 15, to enable this GetAvailableLanguageCodes2() need to be used. So GetAvailableLanguageCodes() will be caped at 15 languages. Reference: http://switchbrew.org/index.php/Settings_services
2018-08-25kernel/error: Amend error code for ERR_MAX_CONNECTIONS_REACHEDLioncash1-2/+4
We can make this error code an alias of the resource limit exceeded error code, allowing us to get rid of the lingering 3DS error code of the same type.
2018-08-25kernel/error: Amend error code for ERR_PORT_NAME_TOO_LONGLioncash1-2/+1
We can treat this as an alias of TooLarge for documentation purposes. This also lets us get rid of another lingering 3DS-related error code.
2018-08-25kernel/error: Add error code for the handle table being fullLioncash3-4/+4
This replaces the lingering 3DS constant with the proper one, and utilizes it within HandleTable's Create() member function.
2018-08-25kernel/error: Add error code for invalid memory permissionsLioncash2-3/+4
2018-08-25kernel/error: Correct kernel error code for invalid combinationLioncash1-1/+2
2018-08-25svc: Return process title ID if queried in GetInfo()Lioncash1-2/+1
We already have the variable itself set up to perform this task, so we can just return its value from the currently executing process instead of always stubbing it to zero.
2018-08-25file_sys/crypto: Fix missing/unnecessary includesZach Hilman9-5/+10
2018-08-25core: Namespace all code in the arm subdirectory under the Core namespaceLioncash13-12/+42
Gets all of these types and interfaces out of the global namespace.
2018-08-25debug_utils: Remove unused includesLioncash5-24/+4
Quite a bit of these aren't necessary directly within the debug_utils header and can be removed or included where actually necessary.
2018-08-25debug_utils: Make BreakpointObserver class' constructor explicitLioncash1-1/+1
Avoids implicit conversions.
2018-08-25debug_utils: Initialize active_breakpoint member of DebugContextLioncash1-2/+2
Ensures that all class members are initialized.
2018-08-25maxwell3d: Move FinishedPrimitiveBatch event after AcceleratedDrawBatch()Lioncash1-4/+4
The start and finish events should likely not be right after one another like this, otherwise the batch will appear to complete immediately
2018-08-24core: Remove always true conditionals in Load()Lioncash1-7/+4
These conditions are always true, since the outer conditional already checks for these conditions.
2018-08-24file_util: Correct return value in early exit of ReadFileToString()Lioncash1-1/+1
While still essentially being zero, we should be returning a numeric value here, not a boolean typed value.
2018-08-24fix SEL_IMM bitstringLaku1-1/+1
2018-08-24hid: Move core include to cpp fileLioncash2-1/+4
This isn't required to be in the header. Instead, directly include what this header needs and move it to the cpp file where it belongs.
2018-08-24gl_rasterizer: Correct assertion condition in SyncLogicOpState()Lioncash1-1/+2
Previously the assert would always be hit, since it was the equivalent of: array == nullptr, which is never true.
2018-08-24filesystem: Fix typo in log messageLioncash1-1/+1
2018-08-24Port #4013 from Citra: "Init logging sooner so we dont miss some logs on startup" (#1142)Tobias1-11/+11
* Port #4013 from Citra: "Init logging sooner so we dont miss some logs on startup" * Fix compilation
2018-08-24xci: Ignore NCA files with updates in secureZach Hilman1-0/+3
2018-08-24content_archive: Add update title detectionZach Hilman2-0/+11
This is needed because the title IDs of update NCAs will not use the update title ID. The only sure way to tell is to look for a partition with BKTR crypto.
2018-08-24Added GetBootMode (#1107)David4-3/+25
* Added GetBootMode Used by homebrew * Added enum for GetBootMode
2018-08-23Shaders: Added decodings for IADD3 instructionstech4me1-0/+6
2018-08-23hex_util: Replace logic_errors with LOG_CRITICALZach Hilman1-5/+17
Makes it so malformed hex strings do not crash the entire program.
2018-08-23qt: Add filename and title id to window title while runningZach Hilman2-0/+18
2018-08-23Addressed plu TTF changesDavid Marcec1-6/+7
2018-08-23key_manager: Eliminate indexed for loopZach Hilman1-6/+13
2018-08-23key_manager: Create keys dir if it dosen't existZach Hilman2-0/+2
On call to WriteKeyToFile, so that the autogenerated file can be written.
2018-08-23file_sys: Cut down on includes and copiesZach Hilman7-19/+30
2018-08-23crypto: Eliminate magic constantsZach Hilman4-32/+38
2018-08-23key_manager: Add support for autogenerated keysZach Hilman2-3/+45
Stored in a separate file than manual keys.
2018-08-23key_manager: Add support for KEK and SD seed derivationZach Hilman2-5/+135
2018-08-23key_manager: Switch to boost flat_map for keysZach Hilman2-32/+14
Should make key gets marginally faster.
2018-08-23game_list: Add SD registration loading to game listZach Hilman2-12/+12
2018-08-23file_sys: Implement NAX containersZach Hilman3-0/+238
2018-08-23registration: Add GetEntryUnparsed methodsZach Hilman2-0/+15
Returns the file before calling parser on it.
2018-08-23sdmc_factory: Add SDMC RegisteredCache getterZach Hilman2-1/+14
2018-08-23qt: Make default row data title name and title idZach Hilman1-2/+2
Helps with installed games by making the title not a hexadecimal id string, instead the name.
2018-08-23vfs: Add GetOrCreateDirectoryRelative methodZach Hilman3-9/+13
2018-08-23filesystem: Add CreateFactories methods to fsZach Hilman3-10/+12
Allows frontend to create registration caches for use before a game has booted.
2018-08-23filesystem: Add logging to registration gettersZach Hilman1-4/+25
2018-08-23loader: Add new NAX-specific errors and messagesZach Hilman2-1/+27
2018-08-23nax: Add AppLoader_NAX and update loader to support itZach Hilman4-2/+121
2018-08-23xts_encryption_layer: Implement XTSEncryptionLayerZach Hilman3-1/+81
2018-08-23aes_util: Make XTSTranscode stricter about sizesZach Hilman1-5/+2
XTS with Nintendo Tweak will fail mysteriously if the sector size is not 0x4000. Upgrade the critical log to an assert to prevent undefined behavior.
2018-08-23ctr_encryption_layer: Fix bug when transcoding small dataZach Hilman1-5/+3
Fixes a bug where data lengths of less than size 0x10 will fail or have misleading return values.
2018-08-23xci: Fix error masking issueZach Hilman3-5/+17
Prevents NCA-related errors from being masked into MissingProgramNCA or MissingKeyFile
2018-08-23gl_rasterizer_cache: Blit when possible on RecreateSurface.bunnei1-5/+12
2018-08-23gl_rasterizer_cache: Reserve surfaces that have already been created for later use.bunnei2-3/+61
2018-08-23gl_rasterizer_cache: Remove assert for RecreateSurface type.bunnei1-1/+0
2018-08-23gl_rasterizer_cache: Implement compressed texture copies.bunnei1-8/+18
2018-08-23gl_rasterizer: Implement stencil test.bunnei3-4/+58
- Used by Splatoon 2.
2018-08-23gl_rasterizer: Implement partial color clear and stencil clear.bunnei1-12/+42
2018-08-23maxwell_3d: Update to include additional stencil registers.bunnei1-20/+50
2018-08-23gl_state: Update to handle stencil front/back face separately.bunnei2-33/+38
2018-08-23Added SharedFonts loading via TTFDavid Marcec1-5/+50
By having the following TTF files in your yuzu sysdata directory. You can load sharedfonts via TTF files. FontStandard.ttf FontChineseSimplified.ttf FontExtendedChineseSimplified.ttf FontChineseTraditional.ttf FontKorean.ttf FontNintendoExtended.ttf FontNintendoExtended2.ttf
2018-08-23Swap "Plus" with "Minus" on the controller GUI (#1150)literalmente-game1-8/+8
* Swap "Plus" with "Minus" on the controller GUI Major fix /s
2018-08-22gl_shader_gen: Make ShaderSetup's constructor explicitLioncash1-1/+1
Prevents implicit conversions.
2018-08-22gl_shader_gen: Use a std::vector to represent program code instead of std::arrayLioncash2-11/+16
While convenient as a std::array, it's also quite a large set of data as well (32KB). It being an array also means data cannot be std::moved. Any situation where the code is being set or relocated means that a full copy of that 32KB data must be done. If we use a std::vector we do need to allocate on the heap, however, it does allow us to std::move the data we have within the std::vector into another std::vector instance, eliminating the need to always copy the program data (as std::move in this case would just transfer the pointers and bare necessities over to the new vector instance).
2018-08-22more fixesLaku1-6/+7
2018-08-22fixesLaku1-6/+12
2018-08-22renderer_opengl: Namespace OpenGL codeLioncash21-23/+70
Namespaces all OpenGL code under the OpenGL namespace. Prevents polluting the global namespace and allows clear distinction between other renderers' code in the future.
2018-08-22remove debug loggingLaku1-2/+0
2018-08-22implement lop3Laku2-0/+55
2018-08-22config: Fixed icon size get set to 0tech4me1-1/+1
2018-08-22maxwell_to_gl: Implement PrimitiveTopology::LinesOatmealDome1-0/+2
Used by Splatoon 2's debug menu.
2018-08-22Added missing include for pl:uDavid Marcec1-0/+1
Should fix any compile errors
2018-08-22PL:U Added BFTTF loading(Loading from System NAND dumps) (#1088)David1-25/+140
* Added bfttf loading We can now load system bfttf fonts from system archives AND shared memory dumps. This allows people who have installed their system nand dumps to yuzu to automatically get shared font support. We also now don't hard code the offsets or the sizes of the shared fonts and it's all calculated for us now. * Addressed plu fixups * Style changes for plu * Fixed logic error for plu and added more error checks.
2018-08-22Revert "Shader: Use the right sampler type in the TEX, TEXS and TLDS instructions."bunnei2-153/+31
- This reverts commit 3ef4b3d4b445960576f10d1ba6521580d03e3da8. - This commit had broken a lot of games. We really should do a full implementation of this in one change.
2018-08-21shader_bytecode: Parenthesize conditional expression within GetTextureType()Lioncash1-1/+1
Resolves a -Wlogical-op-parentheses warning.
2018-08-21vfs: Replace mode.h include with forward declarations where applicableLioncash5-4/+7
Avoids the need to rebuild these source files if the mode header changes.
2018-08-21audio_core/filter: Add explicit cast to assignment in Process()Lioncash1-1/+1
Previously this would cause warnings about implicit conversions to s16 from a double
2018-08-21logging/text_formatter: Use empty braces for initializing CONSOLE_SCREEN_BUFFER_INFO instanceLioncash1-1/+1
The previous form of initializing done here is a C-ism, an empty set of braces is sufficient for initializing (and doesn't potentially cause missing brace warnings, given the first member of the struct is a COORD struct).
2018-08-21am: Utilize std::array within PopLaunchParameter()Lioncash1-3/+4
Gets rid of the potential for C array-to-pointer decay, and also makes pointer arithmetic to get the end of the copy range unnecessary. We can just use std::array's begin() and end() member functions.
2018-08-21perf_stats: Change MAX_LAG_TIME_US to an appropriate valueMerryMage1-1/+1
25us is far too small, and would result in std::this_thread::sleep_for being called with this as a maximum value. This means that a guest application that produces frames instantly would only be limited to 40 kHz. 25ms is a more appropriate value, as it allows for a 60 Hz refresh rate while providing enough slack in the negative region.
2018-08-21sdmc_factory: Remove unnecessary core includeLioncash2-1/+1
This doesn't require the central core header to be included, it just needs the vfs headers.
2018-08-21Port #3902 from Citra: "Add restart hotkey & menu option"fearlessTobi2-0/+18
2018-08-21Port #4056 from Citra: "Add Clear Recent Files menu action"fearlessTobi2-0/+14
2018-08-21bit_field: Convert ToBool() into explicit operator boolLioncash1-2/+1
Gets rid of a TODO that is long overdue.
2018-08-21qt/main: Port part of citra(#3411), open savedata workstech4me6-11/+45
2018-08-21renderer_opengl: Use LOG_DEBUG for GL_DEBUG_SEVERITY_NOTIFICATION and GL_DEBUG_SEVERITY_LOW logsLioncash1-1/+1
LOG_TRACE is only enabled on debug builds which can be quite slow when trying to debug graphics issues. Instead we can log the messages to the debug log, which is available on both release and debug builds.
2018-08-21service/filesystem: Use forward declarations where applicableLioncash9-5/+28
Avoids the need to rebuild multiple source files if the filesystem code headers change. This also gets rid of a few instances of indirect inclusions being relied upon
2018-08-21gl_stream_buffer: Add missing header guardLioncash1-0/+2
Prevents potential compilation errors from occuring due to multiple inclusions
2018-08-21Shaders: Implement depth writing in fragment shaders.Subv1-1/+6
We'll write <last color output reg + 2> to gl_FragDepth.
2018-08-21shader_bytecode: Replace some UNIMPLEMENTED logs.bunnei1-2/+6
2018-08-21gl_shader_decompiler: Implement Texture3D for TEXS.bunnei1-0/+7
2018-08-21gl_shader_decompiler: Implement TextureCube for TEX.bunnei1-0/+8
2018-08-21Shaders: Fixed the coords in TEX with Texture2D.Subv1-1/+1
The X and Y coordinates should be in gpr8 and gpr8+1, respectively. This fixes the cutscene rendering in Sonic Mania.
2018-08-21Shaders: Log and crash when using an unimplemented texture type in a texture sampling instruction.Subv1-5/+14
2018-08-21romfs_factory: Remove unnecessary includes and use forward declarations where applicableLioncash3-3/+12
Avoids the need to rebuild whatever includes the romfs factory header if the loader header ever changes. We also don't need to include the main core header. We can instead include the headers we specifically need.
2018-08-21telemetry_session: Don't allocate std::string instances for program lifetime in GetTelemetryId() and RegenerateTelemetryId()Lioncash1-4/+4
Given these functions aren't intended to be used frequently, there's no need to keep the std::string instances allocated for the whole lifetime of the program. It's just a waste of memory.
2018-08-21acc: Replace profile_manager include with a forward declarationLioncash2-2/+6
This is only used in a shared_ptr, so we can forward declare it.
2018-08-21acc: Simplify WriteBuffer call within LoadImage()Lioncash1-3/+3
We have an overload of WriteBuffer that accepts containers that satisfy the ContiguousContainer concept, which std::array does, so we only need to pass in the array itself.
2018-08-21acc: Correct IProfile's constructor initializer list orderLioncash1-1/+1
Arranges them in the order the members would be initialized
2018-08-21acc: Remove unused DEFAULT_USER_IDLioncash1-3/+0
This is no longer used, so it can be removed.
2018-08-21profile_manager: Use INVALID_UUID in the initializer of last_opened_userLioncash1-1/+1
Makes it a little bit more self-documenting.
2018-08-21profile_manager: Remove unnecessary memcpy in GetProfileBaseAndData()Lioncash1-1/+1
Given the source and destination types are the same std::array type, we can simply use regular assignment to perform the same behavior.
2018-08-21profile_manager: Use type aliases for username data, profile data, and user arraysLioncash2-19/+22
Avoids the need to repeatedly specify the whole array type in multiple places.
2018-08-21profile_manager: Take ProfileInfo by const reference where applicableLioncash2-8/+8
ProfileInfo is quite a large struct in terms of data, and we don't need to perform a copy in these instances, so we can just pass constant references instead.
2018-08-21profile_manager: Make array parameter to CreateNewUser a const referenceLioncash2-2/+2
This doesn't modify the passed in array, so this can be a const reference.
2018-08-21profile_manager: Remove unnecessary staticLioncash1-1/+1
This can just be constexpr like the others
2018-08-21profile_manager: Simplify UUID's two param constructor, operator==, and operator boolLioncash1-6/+4
We can use the constructor initializer list and just compare the contained u128's together instead of comparing each element individually. Ditto for comparing against an invalid UUID.
2018-08-21profile_manager: Move UUID generation function to the cpp fileLioncash2-10/+12
This avoids needing to dump the contents of <random> into other files that include the profile manager header.
2018-08-21GPU: Implemented the logic op functionality of the GPU.Subv3-0/+61
This will ASSERT if blending is enabled at the same time as logic ops.
2018-08-21GLState: Allow enabling/disabling GL_COLOR_LOGIC_OP independently from blending.Subv2-6/+19
2018-08-21rasterizer_interface: Remove ScreenInfo from AccelerateDraw()'s signatureLioncash5-17/+14
This is an OpenGL renderer-specific data type. Given that, this type shouldn't be used within the base interface for the rasterizer. Instead, we can pass this information to the rasterizer via reference.
2018-08-21GPU: Added registers for the logicop functionality.Subv1-1/+28
2018-08-21renderer_base: Make creation of the rasterizer, the responsibility of the renderers themselvesLioncash4-14/+12
Given we use a base-class type within the renderer for the rasterizer (RasterizerInterface), we want to allow renderers to perform more complex initialization if they need to do such a thing. This makes it important to reserve type information. Given the OpenGL renderer is quite simple settings-wise, this is just a simple shuffling of the initialization code. For something like Vulkan however this might involve doing something like: // Initialize and call rasterizer-specific function that requires // the full type of the instance created. auto raster = std::make_unique<VulkanRasterizer>(some, params); raster->CallSomeVulkanRasterizerSpecificFunction(); // Assign to base class variable rasterizer = std::move(raster)
2018-08-21Port #3353 from CitrafearlessTobi10-25/+94
2018-08-21Shaders: Write all the enabled color outputs when a fragment shader exits.Subv2-6/+45
We were only writing to the first render target before. Note that this is only the GLSL side of the implementation, supporting multiple render targets requires more changes in the OpenGL renderer. Dual Source blending is not implemented and stuff that uses it might not work at all.
2018-08-20registration: Add Data_Unknown5 NCAContentTypeZach Hilman3-2/+3
2018-08-20profile_manager: Remove unnecessary std::move in AddToProfiles() and CreateNewUser()Lioncash1-2/+2
Moving a const reference isn't possible, so this just results in a copy (and given ProfileInfo is composed of trivial types and aggregates, a move wouldn't really do anything).
2018-08-20Rasterizer: Reinterpret the raw texture bytes instead of blitting (and thus doing format conversion) to a new texture when a game requests an old texture address with a different format.Subv1-3/+49
2018-08-20Rasterizer: Don't attempt to copy over the old texture's data when doing a format reinterpretation if we're only going to clear the framebuffer.Subv4-13/+21
2018-08-20Implemented RGBA8_UINTDavid Marcec4-45/+58
Needed by kirby
2018-08-20game_list: Avoid uninitialized variables when retrieving program IDLioncash1-2/+2
Avoids potentially leaving this variable uninitialized based off the loader failing to retrieve the ID value.
2018-08-20Added CheckFreeCommunicationPermissionDavid Marcec1-1/+8
This fixes save files not loading in splatoon 2
2018-08-20Shaders/TEXS: Fixed the component mask in the TEXS instruction.Subv1-18/+18
Previously we could end up with a TEXS that didn't write any outputs, this was wrong.
2018-08-19Shaders/TEXS: Fixed the component mask in the TEXS instruction.Subv1-6/+11
Previously we could end up with a TEXS that didn't write any outputs, this was wrong.
2018-08-19Shader: Implemented the TLD4 and TLD4S opcodes using GLSL's textureGather.Subv1-0/+51
It is unknown how TLD4S determines the sampler type, more research is needed.
2018-08-19Shader: Use the right sampler type in the TEX, TEXS and TLDS instructions.Subv2-29/+127
Different sampler types have their parameters in different registers.
2018-08-19Shader: Added bitfields for the texture type of the various sampling instructions.Subv1-1/+65
2018-08-19Shaders: Added decodings for TLD4 and TLD4SSubv1-3/+7
2018-08-19Shaders: Added decodings for the LDG and STG instructions.Subv1-0/+4
2018-08-19Shaders: Implemented the gl_FrontFacing input attribute (attr 63).Subv2-0/+7
2018-08-19Added check to see if ARB_texture_mirror_clamp_to_edge is supportedDavid Marcec2-0/+4
2018-08-19filesystem: Add support for loading of system archivesZach Hilman7-20/+99
2018-08-18Shader: Remove an unneeded assert, the negate bit is implemented for conversion instructions.Subv1-2/+0
2018-08-18GLRasterizer: Implemented instanced vertex arrays.Subv2-4/+30
Before each draw call, for every enabled vertex array configured as instanced, we take the current instance id and divide it by its configured divisor, then we multiply that by the corresponding stride and increment the start address by the resulting amount. This way we can simulate the vertex array being incremented once per instance without actually using OpenGL's instancing functions.
2018-08-18Shader: Implemented the predicate and mode arguments of LOP.Subv2-11/+39
The mode can be used to set the predicate to true depending on the result of the logic operation. In some cases, this means discarding the result (writing it to register 0xFF (Zero)). This is used by Super Mario Odyssey.
2018-08-18Added WrapMode MirrorOnceClampToEdgeDavid Marcec1-0/+2
Used by splatoon 2
2018-08-18Shaders: Implemented a stack for the SSY/SYNC instructions.Subv1-3/+36
The SSY instruction pushes an address into the stack, and the SYNC instruction pops it. The current stack depth is 20, we should figure out if this is enough or not.
2018-08-18Shaders: Corrected the 'abs' and 'neg' bit usage in the float arithmetic instructions.Subv2-16/+38
We should definitely audit our shader generator for more errors like this.
2018-08-18Added predcondition GreaterThanWithNanDavid Marcec2-5/+8
2018-08-17Implement SetIdleTimeDetectionExtension & GetIdleTimeDetectionExtension (#1059)greggameplayer2-2/+22
* Used by Mario Tennis Aces
2018-08-17gl_rasterizer_cache: Remove asserts for supported blits.bunnei1-2/+0
2018-08-17renderer_opengl: Treat OpenGL errors as critical.bunnei1-1/+1
2018-08-16correct coding stylegreggameplayer1-1/+1
2018-08-16Implement GetDefaultDisplayResolutionChangeEventgreggameplayer2-1/+13
Require by Toki Tori and Toki Tori 2+
2018-08-16qt/main: Unindent code in OnMenuInstallToNAND()Lioncash1-70/+70
We can change this into an early-return if the filename is empty. There's no need to include all of the code within the if statement.
2018-08-16qt/main: Make installation dialog text within OnMenuInstallToNAND() translatableLioncash1-14/+15
This is user-facing text, so it should be marked as translatable by Qt.
2018-08-16qt/main: Get rid of compilation warningsLioncash1-4/+8
Gets rid of truncation warnings about conversion to int. While we're at it, we can also de-hardcode the buffer size being used.
2018-08-16core: Delete System copy/move constructors and assignment operatorsLioncash1-0/+6
Prevents potentially making copies or doing silly things by accident with the System instance, particularly given our current core is designed (unfortunately) around one instantiable instance. This will prevent the accidental case of: auto instance = System::Instance(); being compiled without warning when it's supposed to be: auto& instance = System::Instance();
2018-08-16dynarmic: Update to 550d662MerryMage1-0/+3
550d662 load_store_exclusive: Define s == t state to be Constraint_NONE 0b69381 A64/translate: Allow for unpredictable behaviour to be defined 6d236d4 system: Implement MRS CNTFRQ_EL0 6cbb6fb A32/testenv: Add missing headers 6729328 externals: Update xbyak to v5.67 1812bd2 Squashed 'externals/xbyak/' changes from 2794cde7..671fc805 9a95802 externals: Document subtrees 714a840 A64: Implement SQ{ADD, SUB}, and UQ{ADD, SUB}'s vector variants 8cab459 A64: Implement UQADD/UQSUB's scalar variants 18a8151 ir: Add opcodes for unsigned saturating add and subtract a5660ee x64/reg_alloc: Use type alias for array returned by GetArgumentInfo() 29489b5 ir/value: Use type alias CoprocessorInfo for std::array<u8, 8> e23ba26 status_register_access: Add support for bits 0 and 1 of mask to MSR 55190bd fuzz_with_unicorn: Split utility functions into fuzz_util 23b049d A32/translate/load_store: Correct detection of writeback 7ec9f15 A32/translate: Add TranslateSingleInstruction efeecb4 A32/ir_emitter: Bug fix: IREmitter::ExceptionRaised using incorrect opcode 08d1d19 A32/decoders: Split instruction list into include file 2d929cc tests: Refactor unicorn_emu to allow for A32 unicorn f672368 microinstruction: Improve assert messages 7ebff50 emit_x64_vector: EmitVectorNarrow16: AVX512 implementation edce230 emit_x64_vector: EmitVectorNarrow32: prefer pblendw to loading constant
2018-08-16common: Namespace hex_util.h/.cppLioncash4-12/+22
It's in the common code, so it should be under the Common namespace like everything else.
2018-08-16gl_rasterizer_cache: Treat Depth formats differently from DepthStencil.bunnei2-16/+26
2018-08-15Shader/Conversion: Implemented the negate bit in F2F and I2I instructions.Subv1-4/+12
2018-08-15Shader/I2F: Implemented the negate I2F_C instruction variant.Subv1-7/+23
2018-08-15Shader/F2I: Implemented the negate bit in the I2F instructionSubv1-0/+4
2018-08-15Shader/F2I: Implemented the F2I_C instruction variant.Subv1-2/+10
2018-08-15Shader/F2I: Implemented the negate bit in the F2I instruction.Subv1-0/+4
2018-08-15kernel/server_session: Add IsSession() member functionLioncash3-3/+8
Allows querying the inverse of IsDomain() to make things more readable. This will likely also be usable in the event of implementing ConvertDomainToSession().
2018-08-15sm/controller: Correct return value of QueryPointerBufferSizeLioncash1-1/+1
This should be returning a u16 according to Switch Brew.
2018-08-15loader: Make ResultStatus directly compatible with fmtLioncash5-14/+18
We can make the enum class type compatible with fmt by providing an overload of operator<<. While we're at it, perform proper bounds checking. If something exceeds the array, it should be a hard fail, because it's, without a doubt, a programmer error in this case.
2018-08-15loader/nca: Remove unnecessary includes and member variablesLioncash2-20/+11
2018-08-15loader/xci: Remove unnecessary includes and member variablesLioncash2-15/+11
Many of these aren't necessary and will cause this file to be required to be recompiled whenever any changes to those files are made, which lengthens compile times for no reason. This also removes an unused metadata variable from AppLoader_XCI
2018-08-15lm: Use LOG_DEBUG for printing out trace logsLioncash1-1/+1
Using LOG_TRACE here isn't a good idea because LOG_TRACE is only enabled when yuzu is compiled in debug mode. Debug mode is also quite slow, and so we're potentially throwing away logging messages that can provide value when trying to boot games.
2018-08-15lm: Handle threads and modules within the loggerLioncash1-1/+19
The thread field serves to indicate which thread a log is related to and provides the length of the thread's name, so we can print that out, ditto for modules. Now we can know what threads are potentially spawning off logging messages (for example Lydie & Suelle bounces between MainThread and LoadingThread when initializing the game).
2018-08-15gl_rasterizer_cache: Cleanup some PixelFormat names and logging.bunnei2-41/+71
2018-08-15Rasterizer: Implemented instanced rendering.Subv7-5/+28
We keep track of the current instance and update an uniform in the shaders to let them know which instance they are. Instanced vertex arrays are not yet implemented.
2018-08-15gl_rasterizer_cache: Add RGBA16U to PixelFormatFromTextureFormat.bunnei1-1/+9
- Used by Breath of the Wild.
2018-08-15Implement Z16_UNORM in PixelFormatFromTextureFormat functiongreggameplayer1-0/+2
Require by Zelda Breath Of The Wild
2018-08-15loader: Remove address mapping remnants from citraLioncash6-17/+0
These mappings are leftovers from citra and don't apply to the Switch.
2018-08-15kernel/svc: Log svcBreak parametersLioncash1-2/+5
Given if we hit here all is lost, we should probably be logging the break reason code and associated information to distinguish between the causes.
2018-08-15gl_shader_decompiler: Several fixes for indirect constant buffer loads.bunnei1-13/+22
2018-08-15gl_rasterizer: Fix upload size for constant buffers.bunnei1-3/+3
2018-08-15maxwell_to_gl: Properly handle UnsignedInt/SignedInt sizes.bunnei1-5/+20
2018-08-15gl_rasterizer_cache: Implement G8R8S format.bunnei2-34/+49
- Used by Super Mario Odyssey.
2018-08-15emu_window: Ensure WindowConfig members are always initializedLioncash1-3/+3
Previously we weren't always initializing all members of the struct. Prevents potentially wonky behavior from occurring.
2018-08-15common/telemetry: Migrate core-independent info gathering to commonLioncash3-62/+84
Previously core itself was the library containing the code to gather common information (build info, CPU info, and OS info), however all of this isn't core-dependent and can be moved to the common code and use the common interfaces. We can then just call those functions from the core instead. This will allow replacing our CPU detection with Xbyak's which has better detection facilities than ours. It also keeps more architecture-dependent code in common instead of core.
2018-08-15common/xbyak_abi: Mark defined functions in header as inlineLioncash1-7/+7
Avoids potential One Definition Rule violations when these are used in the future.
2018-08-15common/xbyak: Use nested namespace specifiers where applicableLioncash2-8/+4
2018-08-15common: Remove unused old breakpoint source filesLioncash3-141/+0
These currently aren't used and contain commented out source code that corresponds to Dolphin's JIT. Given our CPU code is organized quite differently, we shouldn't be keeping this around (at the moment it just adds to compile times marginally).
2018-08-14logging/backend: Use const reference to refer to log filterLioncash1-2/+3
The filter is returned via const reference, so this was making a pointless copy of the entire filter every time a message was being pushed into the logger instance.
2018-08-14Fix BC7Ugreggameplayer1-1/+1
2018-08-14mm_u: Forward all old variants of functions to the new onesLioncash1-5/+11
Ensures both variants go through the same interface, and while we're at it, add Finalize to provide the inverse of Initialize for consistency.
2018-08-14mm_u: Move implementation class into the cpp fileLioncash2-46/+46
Now if changes are ever made to the behavior of the class, it doesn't involve rebuilding everything that includes the mm_u header.
2018-08-14audout_u: Correct IAudioOut initializer list orderLioncash1-1/+1
Orders elements in the precise order they'll be initialized.
2018-08-14renderer_opengl: Implement RenderTargetFormat::RGBA16_UNORM.bunnei4-37/+48
- Used by Breath of the Wild.
2018-08-13common/misc: use windows.hZhu PengFei1-1/+1
linux-mingw does not really like this.
2018-08-13arm_dynarmic: Remove IsExecuting check from PrepareRescheduleMerryMage1-3/+1
No longer required. HaltExecution is a no-op if it is not currently executing.
2018-08-13Implement RG32UI and R32UIDavid Marcec4-7/+45
Needed for xenoblade
2018-08-13Core::CoreTiming: add UnscheduleEventThreadsafeB3n303-1/+12
2018-08-13audio_renderer: samples_remaining counts frames, not samplesMerryMage1-1/+1
2018-08-13audio_core: InterpolateMerryMage5-0/+121
2018-08-13audio_core: Implement low-pass filterMerryMage3-2/+145
2018-08-13maxwell_to_gl: Implement VertexAttribute::Size::Size_8.bunnei1-0/+1
- Used by Breath of the Wild.
2018-08-13kernel/object: Tighten object against data racesLioncash2-8/+9
Despite being covered by a global mutex, we should still ensure that the class handles its reference counts properly. This avoids potential shenanigans when it comes to data races. Given this is the root object that drives quite a bit of the kernel object hierarchy, ensuring we always have the correct behavior (and no races) is a good thing.
2018-08-13renderer_opengl: Implement RenderTargetFormat::RGBA16_UINT.bunnei4-34/+45
- Used by Breath of the Wild.
2018-08-13Registered missing channel devicesDavid Marcec1-0/+4
2018-08-13Added missing channel devicesDavid Marcec5-0/+144
2018-08-13maxwell_to_gl: Implement PrimitiveTopology::LineStrip.bunnei1-0/+2
- Used by Breath of the Wild.
2018-08-13renderer_opengl: Implement RenderTargetFormat::RG8_UNORM.bunnei4-26/+61
- Used by Breath of the Wild.
2018-08-13CPU/Timing: Use an approximated amortized amount of ticks when advancing timing.Subv2-1/+11
We divide the number of ticks to add by the number of cores (4) to obtain a more or less rough estimate of the actual number of ticks added. This assumes that all 4 cores are doing similar work. Previously we were adding ~4 times the number of ticks, thus making the games think that time was going way too fast. This lets us bypass certain hangs in some games like Breath of the Wild. We should modify our CoreTiming to support multiple cores (both running in a single thread, and in multiple host threads).
2018-08-13Kernel/SVC: Don't reschedule the current core when creating a new thread.Subv1-1/+0
The current core may have nothing to do with the core where the new thread was scheduled to run. In case it's the same core, then the following PrepareReshedule call will take care of that.
2018-08-13Core/HLE: Make the 'reschedule_pending' flag atomic.Subv1-1/+1
Another thread may write to this variable while the core in question is in the middle of checking for a reschedule request.
2018-08-13CPU/HLE: Lock the HLE mutex before performing a reschedule.Subv1-0/+3
Another thread might be in the middle of an SVC, thus altering the state of the schedulers.
2018-08-13Kernel/Threads: Lock the HLE mutex when executing the wakeup callback.Subv1-0/+5
Another thread might be in the middle of a reschedule, thus altering the state of the schedulers.
2018-08-13Kernel/Thread: Always use the threadsafe option when scheduling wakeups.Subv2-4/+4
WakeAfterDelay might be called from any host thread, so err on the side of caution and use the thread-safe CoreTiming::ScheduleEventThreadsafe. Note that CoreTiming is still far from thread-safe, there may be more things we have to work on for it to be up to par with what we want.
2018-08-13gl_shader_decompiler: Implement XMAD instruction.bunnei2-4/+120
2018-08-12Kernel/Mutex: Don't duplicate threads in the mutex waiter list.Subv2-2/+22
Exit from AddMutexWaiter early if the thread is already waiting for a mutex owned by the owner thread. This accounts for the possibility of a thread that is waiting on a condition variable being awakened twice in a row. Also added more validation asserts. This should fix one of the random crashes in Breath Of The Wild.
2018-08-12vfs: Make VfsFilesystem constructor explicitLioncash1-1/+1
Makes it consistent with the other VFS interfaces and prevents implicit construction.
2018-08-12vfs: Make type hierarchy objects classes instead of structsLioncash4-10/+16
struct should be used when the data type is very simple or otherwise has no invariants associated with it. Given these are used to form a hierarchy, class should be used instead.
2018-08-12registration: Various style and documentation improvementsZach Hilman3-18/+22
Fix logic in RealVfsFilesystem Create methods Remove magic numbers Fix regex errors
2018-08-12cubeb_sink: Protect queue with a mutexMerryMage1-0/+6
2018-08-12scheduler: Make HaveReadyThreads() a const member functionLioncash2-2/+2
This function doesn't modify instance state, so the const qualifier can be added to it.
2018-08-12thread_queue_list: Make contains() and get_first() const member functionsLioncash1-4/+4
These don't directly modify the contained data.
2018-08-12thread_queue_list: Convert typedef to a type aliasLioncash1-1/+1
2018-08-12gl_rasterizer: Use a shared helper to upload from CPU memory.Markus Wick2-28/+33
2018-08-12gl_state: Don't track constant buffer mappings.Markus Wick3-41/+3
2018-08-12gl_rasterizer: Use the stream buffer for constant buffers.Markus Wick4-29/+32
2018-08-12gl_rasterizer: Use the streaming buffer itself for the constant buffer.Markus Wick2-33/+15
Don't emut copies, especially not for data, which is used once. They just end in a huge GPU overhead.
2018-08-12gl_rasterizer: Use a helper for aligning the buffer.Markus Wick2-15/+22
2018-08-12Update the stream_buffer helper from Citra.Markus Wick4-184/+98
Please see https://github.com/citra-emu/citra/pull/3666 for more details.
2018-08-12GetAudioDeviceServiceWithRevisionInfoDavid Marcec2-1/+13
As we're not handling any anything about the revision data for GetAudioDeviceServiceWithRevisionInfo, it's currently marked as stubbed. However for games this shouldn't affect the result. Proper revision info would be more for homebrew.
2018-08-12hid: disable clang-format around tablesLioncash1-4/+5
Prevents clang-format from butchering them.
2018-08-12hid: Stub DisconnectNpad()Lioncash1-1/+7
This is required by ARMS.
2018-08-12vfs: Use sanitized paths within MoveFile() and MoveDirectory()Lioncash1-10/+10
Previously these were being unused (or partially unused). While we're at it, use better naming to make it visibly obvious which variant of the path is being used.
2018-08-12card_image: Use type aliases to shorten definitionsLioncash2-6/+6
We have the aliases, so we may as well use 'em.
2018-08-12card_image: Simplify return statement of GetSubdirectories()Lioncash1-1/+1
We don't need to write out the construction long-form, we can just let the language itself work it out off the return type.
2018-08-12gl_shader_decompiler: Fix SetOutputAttributeToRegister empty check.bunnei1-2/+2
2018-08-12Pushed the requested sample rate instead of our fixed sample rateDavid Marcec2-5/+3
2018-08-12made ResultStatus a u16David Marcec3-3/+3
2018-08-12Added GetAudioRendererSampleRate, GetAudioRendererSampleCount & GetAudioRendererMixBufferCountDavid Marcec3-6/+44
GetAudioRendererSampleRate is set as a "STUB" as a game could check if the sample rate it sent and the sample rate it wants don't match. Just a thought of something which could happen so keeping it as stub for the mean time
2018-08-12gl_shader_decompiler: Fix GLSL compiler error with KIL instruction.bunnei1-0/+8
2018-08-12Stub UpdateUserPresenceDavid Marcec1-1/+8
Needed for Retro City Rampage to go in game
2018-08-12Fixed invalid cast in loaderDavid Marcec1-1/+1
GetMessageForResultStatus takes a u16, not a size_t.
2018-08-12registration: Add support for force overwrite of installedZach Hilman4-53/+106
2018-08-12game_list: Split game list scans to multiple functionsZach Hilman2-9/+16
Avoids unnecessary rebuilds of control data on every layer of recursion in AddFstEntriesToGameList
2018-08-12vfs_real: Add CreateFullPath to Create* operationsZach Hilman2-13/+6
2018-08-12control_metadata: Remove unnecessary reference to base fileZach Hilman2-2/+1
2018-08-12romfs: Remove cyclic shared_ptr leak in romfs codeZach Hilman3-8/+8
2018-08-12registration: Update documentation and styleZach Hilman5-42/+69
2018-08-12nca_metadata: Remove unnecessary reference to base fileZach Hilman2-3/+2
2018-08-12bis_factory: Create NAND dirs if they don't existZach Hilman1-2/+9
2018-08-12qt: Use custom RawCopy with progress bar for installsZach Hilman1-2/+28
2018-08-12registration: Take RawCopy function as parameterZach Hilman2-10/+15
Instead of defaulting to VfsRawCopy
2018-08-12game_list: Populate control data from installed NANDZach Hilman2-31/+35
2018-08-12registered_cache: Fix missing reading from yuzu_metaZach Hilman1-7/+16
2018-08-12file_sys: Comply to style guidelinesZach Hilman8-47/+60
2018-08-12qt: Add 'Install to NAND' option to menuZach Hilman5-1/+99
Prompts for title type on NCA files.
2018-08-12game_list: Modify game list to scan installed titlesZach Hilman1-0/+45
2018-08-12file_sys: Add RegisteredCacheZach Hilman2-0/+543
Manages NAND NCA get and install.
2018-08-12file_sys: Add support for parsing NCA metadata (CNMT)Zach Hilman3-0/+238
2018-08-12card_image: Add accessor for all NCAs in XCIZach Hilman2-0/+5
2018-08-12vfs_real: Add CreateFullPath to CreateFileZach Hilman1-3/+6
Fixes bugs with calling CreateFile when the immediate directory does not exist.
2018-08-12filesystem: Add Open and Register functions for BISFactoryZach Hilman2-4/+23
2018-08-12bis_factory: Add partial implementation of BISFactoryZach Hilman2-0/+54
Creates and stores RegisteredCaches for user and system NAND, as creation of a RegisteredCache is expensive.
2018-08-12loader: Join 0* files in directory if filename is 00Zach Hilman1-1/+33
i.e. Load the concatenated 00+01 if 01 exists as well. Needed for split NAND NCAs.
2018-08-12loader: Recognize filename '00' as NCAZach Hilman1-0/+2
Needed to avoid mismatch filetype warnings on split NAND NCAs
2018-08-12vfs: Add ConcatenatedVfsFileZach Hilman2-0/+134
2018-08-12crypto: Remove hex utilities from key_managerZach Hilman2-36/+2
Move to hex_util.h in common
2018-08-12file_util: Add getter for NAND registration directoryZach Hilman2-0/+8
2018-08-12common: Move hex string processing to separate fileZach Hilman3-0/+64
2018-08-12GPU/Maxwell3D: Implemented an alternative set of blend factors.Subv2-0/+40
These are used by nouveau and some games like SMO.
2018-08-12Implement R8_UINT RenderTargetFormat & PixelFormat (#1014)greggameplayer4-55/+74
- Used by Go Vacation
2018-08-12RasterizerGL: Ignore invalid/unset vertex attributes.Subv2-1/+11
This should make the es2gears example not crash anymore.
2018-08-12friend: Stub DeclareCloseOnlinePlaySession.bunnei1-1/+10
- Used by Splatoon 2.
2018-08-12friend: Fix CreateFriendService to return an IFriendService interface.bunnei1-2/+86
2018-08-12server_session: Provide more useful information and don't crash on bad IPC request.bunnei1-0/+8
2018-08-12gl_rasterizer: Silence implicit truncation warning in SetupShaders()Lioncash1-1/+1
Previously this would warn of truncating a std::size_t to a u32. This is safe because we'll obviously never have more than UINT32_MAX amount of uniform buffers.
2018-08-12core: Namespace EmuWindowLioncash14-22/+44
Gets the class out of the global namespace.
2018-08-12gl_shader_decompiler: Improve handling of unknown input/output attributes.bunnei2-10/+11
2018-08-12gl_rasterizer: Implement render target format RG8_SNORM.bunnei4-8/+18
- Used by Super Mario Odyssey.
2018-08-12gl_rasterizer: Implement render target format RGBA8_SNORM.bunnei4-64/+83
- Used by Super Mario Odyssey.
2018-08-11GPU/Shader: Don't predicate instructions that don't have a predicate field (SSY).Subv2-2/+13
2018-08-11GPU/Shaders: Implemented SSY and SYNC as a way to modify control flow during shader execution.Subv1-6/+25
SSY sets the target label to jump to when the SYNC instruction is executed.
2018-08-11Implement R16S & R16UI & R16I RenderTargetFormats & PixelFormats and more (R16_UNORM needed by Fate Extella) (#848)greggameplayer4-19/+92
* Implement R16S & R16UI & R16I RenderTargetFormats & PixelFormats Do a separate function in order to get Bytes Per Pixel of DepthFormat Apply the new function in gpu.h delete unneeded white space * correct merging error
2018-08-11Better UUID randomnessDavid Marcec1-2/+7
2018-08-11Removed un-needed count from ListOpenUsers and ListAllUsersDavid Marcec1-4/+2
2018-08-11Added better explanations in the profile managerDavid Marcec2-1/+34
2018-08-11Code cleanup for profile managerDavid Marcec3-40/+47
2018-08-11Removed const from ProfileBase InvalidateDavid Marcec1-1/+1
2018-08-11fixed invalid uuid bool operatorDavid Marcec1-1/+1
2018-08-11Added GetOpenUserCountDavid Marcec3-3/+14
2018-08-11Removed all for loops from the profile managerDavid Marcec1-9/+4
2018-08-11Added missing ListAllUsers countDavid Marcec1-1/+2
2018-08-11If statement style changeDavid Marcec1-11/+19
2018-08-11Second round of account changesDavid Marcec3-18/+21
2018-08-11First round of account changesDavid Marcec3-49/+55
2018-08-11Refactored profile manager sharingDavid Marcec10-20/+28
2018-08-11Added IsUserRegistrationRequestPermittedDavid Marcec7-3/+19
2018-08-11video_core; Get rid of global g_toggle_framelimit_enabled variableLioncash8-30/+44
Instead, we make a struct for renderer settings and allow the renderer to update all of these settings, getting rid of the need for global-scoped variables. This also uncovered a few indirect inclusions for certain headers, which this commit also fixes.
2018-08-11renderer_base: Remove unused kFramebuffer enumerationLioncash1-3/+0
This is entirely unused and can be removed.
2018-08-11video_core: Remove unused Renderer enumerationLioncash1-2/+0
Currently we only have an OpenGL renderer, so this is unused in code (and occupies the Renderer identifier in the VideoCore namespace).
2018-08-11qt/game_list: Resolve truncation warning within GameListItemPath's constructorLioncash1-4/+4
Silences a warning about truncating from size_t to u32
2018-08-11gt/game_list: Use std::array in GameListItemPath's data() functionLioncash1-7/+8
We don't need to use a heap-allocated std::vector here, given we explicitly know the bounds.
2018-08-11qt/game_list: Remove redundant base class constructor from initializer listLioncash1-3/+1
This is called automatically anyways.
2018-08-10maxwell_to_gl: Implement VertexAttribute::Size::Size_8_8.bunnei1-0/+1
- Used by Super Mario Odyssey.
2018-08-10maxwell_to_gl: Implement VertexAttribute::Size::Size_32_32_32.bunnei1-0/+2
- Used by Super Mario Odyssey.
2018-08-10Revert "gl_state: Temporarily disable culling and depth test."bunnei1-3/+1
2018-08-10game_list: Reorder error checksZach Hilman1-2/+1
clang-format fix
2018-08-10loader: Add more descriptive errorsZach Hilman17-179/+249
Full list of new errors and descriptions in core/loader/loader.h
2018-08-10gl_rasterizer_cache: Remove unused viewport parameter of GetFramebufferSurfaces()Lioncash3-8/+6
2018-08-10video_core: Use variable template variants of type_traits interfaces where applicableLioncash2-4/+2
2018-08-10textures: Refactor out for Texture/Depth FormatFromPixelFormat.bunnei5-181/+31
2018-08-10gl_rasterizer_cache: Add bounds checking for gl_buffer copies.bunnei1-10/+12
2018-08-10Implement SNORM for BC5/DXN2 (#998)Khangaroo2-38/+55
* Implement BC5/DXN2 (#996) - Used by Kirby Star Allies. * Implement BC5/DXN2 SNORM UNORM for Kirby Star Allies SNORM for Super Mario Odyssey
2018-08-09gl_shader_decompiler: Reserve element memory beforehand in BuildRegisterList()Lioncash1-0/+2
Avoids potentially perfoming multiple reallocations when we know the total amount of memory we need beforehand.
2018-08-09gl_rasterizer_cache: Avoid iterator invalidation issues within InvalidateRegion()Lioncash1-2/+4
A range-based for loop can't be used when the container being iterated is also being erased from.
2018-08-09Implement BC5/DXN2 (#996)Khangaroo3-33/+45
- Used by Kirby Star Allies.
2018-08-09buffer_queue: Make reference parameter of SetPreallocatedBuffer constLioncash2-2/+2
This is simply copied by value, so there's no need to make it a modifiable reference. While we're at it, make the names of the parameters match its definition.
2018-08-09hle_ipc: Make WriteToOutgoingCommandBuffer()'s reference parameter constLioncash2-2/+2
This function doesn't modify anything within the reference Thread instance.
2018-08-09gl_rasterizer_cache: Invert conditional in LoadGLBuffer()Lioncash1-5/+5
It's generally easier to follow code using conditionals that operate in terms of the true case followed by the false case (no chance of overlooking the exclamation mark).
2018-08-09gl_rasterizer_cache: Use std::vector::assign in LoadGLBuffer() for the non-tiled caseLioncash1-4/+6
resize() causes the vector to expand and zero out the added members to the vector, however we can avoid this zeroing by using assign(). Given we have the pointer to the data we want to copy, we can calculate the end pointer and directly copy the range of data without the need to perform the resize() beforehand.
2018-08-09Don't add user if the uuid already existsDavid Marcec1-0/+4
2018-08-09maxwell_to_gl: Implement VertexAttribute::Size::Size_16_16_16_16.bunnei1-0/+1
- Used by Super Mario Odyssey (in game).
2018-08-09maxwell_to_gl: Implement PrimitiveTopology::Points.bunnei1-0/+2
- Used by Super Mario Odyssey (in game).
2018-08-09gl_shader_decompiler: Declare predicates on use.bunnei1-4/+5
- Used by Super Mario Odyssey (when going in game).
2018-08-09maxwell_3d: Ignore macros that have not been uploaded yet.bunnei1-4/+9
- Used by Super Mario Odyssey (in game).
2018-08-09gl_rasterizer_cache: Make pointer const in LoadGLBuffer()Lioncash1-1/+1
This is only ever read from, so we can make the data it's pointing to const.
2018-08-09vfs: Fix documentationZach Hilman2-2/+4
2018-08-09vfs: Fix typo in VfsFilesystem docsZach Hilman2-4/+5
2018-08-09file_util: Use enum instead of bool for specifing path behaviorZach Hilman4-24/+37
2018-08-09loader: Remove unused IdentifyFile overloadZach Hilman2-12/+0
2018-08-09vfs: Use RealVfsFilesystem for fs-operations in RealVfsDirectoryZach Hilman1-2/+10
2018-08-09file_sys: Add missing include in savedata_factoryZach Hilman1-0/+1
2018-08-09core: Port core to VfsFilesystem for file accessZach Hilman12-22/+52
2018-08-09vfs: Add unreachable assert to file permissions converterZach Hilman1-1/+3
2018-08-09vfs: Add RealVfsFilesystem implementationZach Hilman2-81/+290
2018-08-09file_util: Add platform-specific slash option to SanitizePathZach Hilman2-5/+16
2018-08-09vfs: Add VfsFilesystem interface and default implementationZach Hilman2-3/+211
2018-08-09filesystem: Remove unnecessary if conditionsZach Hilman1-1/+1
2018-08-09gl_rasterizer: Do not render when no render target is configured.bunnei1-0/+5
- Used by Super Mario Odyssey.
2018-08-09fsp_srv: Use std::string_view's copy() function instead of strncpy()Lioncash2-8/+10
Given elements inserted into a vector are zeroed out, we can just copy MAX_LEN - 1 elements and the data will already be properly null terminated.
2018-08-09fsp_srv: Emplace entries first when building index instead of emplacing lastLioncash1-2/+3
The current way were doing it would require copying a 768 character buffer (part of the Entry struct) to the new element in the vector. Given it's a plain array, std::move won't eliminate that. Instead, we can emplace an instance directly into the destination buffer and then fill it out, avoiding the need to perform any unnecessary copies. Given this is done in a loop, we can request the destination to allocate all of the necessary memory ahead of time, avoiding the need to potentially keep reallocating over and over on every few insertions into the vector.
2018-08-08common/logging: Add missing service log categoriesLioncash2-0/+16
These weren't added when the services were introduced.
2018-08-08common/color: Remove unnecessary const qualifiers on return typesLioncash1-7/+7
These are just superfluous and not necessesary
2018-08-08common/color: Get rid of undefined behaviorLioncash1-12/+24
Gets rid of type punning via reinterpret_cast within functions. Instead, we use memcpy to transfer the contents across types.
2018-08-08vector_math: Use variable template version of is_signed in Vec classesLioncash1-3/+3
Same behavior, less code
2018-08-08Open first user addedDavid Marcec1-1/+3
2018-08-08Inital pass of account backend implementationDavid Marcec3-12/+22
This commit verified working on puyo
2018-08-08GetProfileBase and GetProfileBaseAndData addedDavid Marcec3-44/+106
2018-08-08began initial implementation of "ProfileManager"David Marcec5-44/+202
2018-08-08Service/Account: stub LoadImage functionmailwl1-1/+22
2018-08-08Switched uuids from u128 to new UUID structDavid Marcec2-10/+49
2018-08-08gpu: Add R11G11B10_FLOAT to RenderTargetBytesPerPixel.bunnei1-0/+1
- Used by Super Mario Odyssey.
2018-08-08hid: fix IsSixAxisSensorAtRest() responsemailwl1-1/+1
2018-08-08gl_shader_decompiler: Stub input attribute Unknown_63.bunnei2-0/+9
2018-08-08maxwell_3d: Use correct const buffer size and check bounds.bunnei4-3/+12
- Fixes mem corruption with Super Mario Odyssey and Pokkén Tournament DX.
2018-08-08renderer_opengl: Use trace log in a few places.bunnei2-2/+2
2018-08-08maxwell_to_gl: Implement VertexAttribute::Size::Size_8_8.bunnei1-0/+1
2018-08-08nvhost_gpu: Don't over copy IoctlSubmitGpfifo.bunnei1-1/+1
2018-08-08gl_rasterizer_cached: Implement RenderTargetFormat::B5G6R5_UNORM.bunnei2-0/+4
- Used by Super Mario Odyssey.
2018-08-08gl_shader_decompiler: Let OpenGL interpret floats.bunnei2-11/+6
- Accuracy is lost in translation to string, e.g. with NaN. - Needed for Super Mario Odyssey.
2018-08-08am: Stub SetScreenShotImageOrientation.bunnei2-1/+9
- Used by Super Mario Odyssey.
2018-08-08acc: Add missing function table entries for GetUserCountLioncash2-2/+2
Given this is stubbed within the common module in 5ac7b84, it should be added to the other relevant tables as well.
2018-08-08acc: Stub GetUserCount. (#973)bunnei3-1/+9
- Used by Pokken Tournament DX.
2018-08-08nvdrv: Get rid of global std::weak_ptrLioncash5-11/+22
Rather than use global state, we can simply pass the instance into the NVFlinger instance directly.
2018-08-08vector_math: Remove unimplemented function prototypesLioncash1-23/+0
2018-08-08vector_math: Make functions constexpr where applicableLioncash1-154/+179
2018-08-08vector_math: Convert typedefs to type aliasesLioncash1-3/+3
2018-08-08common: Convert type traits templates over to variable template versions where applicableLioncash5-11/+11
Uses the C++17 inline variable variants
2018-08-08hle: Remove unused romfs.cpp/.hLioncash3-126/+0
These files are no longer used, so we can get rid of them.
2018-08-08externals: Update catch to 2.3.0Lioncash4-4/+4
Updates the library from 2.2.3 to 2.3.0
2018-08-08Fixed the sRGB pixel format (#963)Hexagon121-1/+2
* Changed the sRGB pixel format return * Add a message about SRGBA -> RGBA conversion
2018-08-07configure_gamelist: Use explicit QVariant constructorZach Hilman1-2/+4
2018-08-07file_util: Avoid sign-conversions in WriteArray() and ReadArray()Lioncash1-4/+8
Prevents compiler warnings.
2018-08-07Lowered down the logging for methodsHexagon121-4/+4
2018-08-07loader: Fix scope error in DeconstructedRomDirectoryZach Hilman1-1/+1
2018-08-07service/apm: Add the apm:sys serviceLioncash3-0/+34
Adds the basic skeleton of the apm:sys service based off the information on Switch Brew.
2018-08-07nvflinger: Correct typo in name of composition eventLioncash1-1/+1
2018-08-07nvdrv: Make Ioctl()'s definition match its prototypeLioncash1-1/+1
The only reason this wasn't a compilation error is because we use little-endian systems.
2018-08-07nvdrv: Get rid of indirect inclusionsLioncash12-15/+17
2018-08-07nvflinger: Get rid of indirect inclusionsLioncash2-1/+7
2018-08-07nvflinger: Use std::string_view in OpenDisplay()Lioncash2-2/+3
We don't need to use a std::string here, given all that's done is comparing the character sequence against another. This allows passing regular const char* without needing to heap allocate.
2018-08-07Make building cubeb optionalKAMiKAZOW1-2/+2
2018-08-07services/hid: Add ActivateNpadWithRevision() to the hid function info arrayLioncash1-0/+1
Updated based off the information on Switch Brew.
2018-08-07service/time: Amend command IDs of ToPosixTime() and ToPosixTimeWithMyRule()Lioncash1-2/+2
Updates the ID of these based off the information on Switch Brew.
2018-08-07service: Add usb servicesLioncash6-0/+259
Adds basic skeleton for the usb services based off the information provided by Switch Brew.
2018-08-07qt/hotkey: Get rid of global hotkey map instanceLioncash8-119/+159
Instead, we make a proper registry class and house it within the main window, then pass it to whatever needs access to the loaded hotkeys. This way, we avoid a global variable, and don't need to initialize a std::map instance before the program can do anything.
2018-08-07loader: Add icon and title support to XCIZach Hilman7-5/+46
2018-08-07Use const where applicableZach Hilman4-7/+7
2018-08-07Avoid parsing RomFS to directory in NCAZach Hilman18-19/+439
2018-08-07client_port: Make all data members privateLioncash3-7/+21
These members don't need to be entirely exposed, we can instead expose an API to operate on them without directly needing to mutate them We can also guard against overflow/API misuse this way as well, given active_sessions is an unsigned value.
2018-08-07GDBStub works with both Unicorn and Dynarmic now (#941)Hedges5-9/+26
* GDBStub works with both Unicorn and Dynarmic now * Tidy up
2018-08-06qt/main: Avoid sign conversions in UpdateRecentFiles()Lioncash1-4/+6
This was intermixing signed and unsigned values when they could all just be signed.
2018-08-06game_list: Remove unnecessary conversion to std::string in ValidateEntry()Lioncash1-8/+10
We can just use the file interfaces that Qt provides to prevent needing to convert to std::string.
2018-08-06game_list: Use QString::fromStdString() where applicable instead of c_str()Lioncash1-5/+7
The codec used by Qt for const char* and std::string don't necessarily have to be the same depending on locale. Therefore, we should be using the correct functions to do the conversions.
2018-08-06game_list: Join declarations and assignments in onTextChanged()Lioncash1-7/+7
There's no need to keep these separate from one another.
2018-08-06qt/main: Collapse if statement in UpdateRecentFiles()Lioncash1-6/+2
Given the function accepts a boolean, we don't need to use an if statement here and repeat ourselves.
2018-08-06qt/main: Better file-existence checking within OnMenuRecentFile() and UpdateUITheme()Lioncash1-8/+6
In OnMenuRecentFile() we don't need to construct a QFileInfo instance just to check if a file exists, we can just use the static member function to do that (which Qt's documentation also notes as quicker than constructing an instance). In UpdateUITheme(), we just want to try and open the file and check the success of that operation. Technically speaking, between the existence check and the open call, the file can be deleted or moved, but still appear to succeed in code. i.e. 1. Existence check -> Returns true 2. File is moved/deleted 3. Open is called, the return value of which isn't checked 4. Nonsense behavior This way we combine the existence check and the open into one.
2018-08-06qt: Don't show error dialog when canceling the Load Folder dialogLioncash1-2/+8
Previously, when canceling out of the Load Folder dialog, a user would get an error dialog about the selected folder not containing a main file, however, by canceling out of the dialog, no selection was actually made.
2018-08-06qt/game_list_p: Remove redundant base class constructor invocationsLioncash1-1/+2
These occur automatically without the need to call them. While we're at it, also std::move the QString instance into its member variable.
2018-08-06qt: Add missing override specifiers where applicableLioncash5-7/+9
2018-08-06qt: Default destructors where applicableLioncash9-16/+15
Makes code consistent with our style of defaulting special member functions where applicable.
2018-08-06kernel/event: Make data members privateLioncash2-5/+9
Instead we can simply provide accessors to the required data instead of giving external read/write access to the variables directly.
2018-08-06Service/Audio: audout_a.cpp: remove pragma oncemailwl1-2/+0
2018-08-06maxwell_3d: Remove outdated assert.bunnei1-2/+0
2018-08-06gl_rasterizer_cache: Avoid superfluous surface copies.bunnei2-4/+21
2018-08-06perf_stats: Correct literal used for MAX_LAG_TIME_USLioncash1-2/+2
ms is shorthand for milliseconds, not microseconds, and given there's no comment indicating that this was intentional, it probably wasn't.
2018-08-06core_timing: Make GetGlobalTimeUs() return std::chrono::microsecondsLioncash4-14/+14
Enforces the time unit being returned and also allows using the standard time utilities to manipulate it.
2018-08-06memory: Make prototype parameter names match their definitionsLioncash1-5/+5
Keeps the code consistent.
2018-08-06memory: Correct prototype of ZeroBlockLioncash1-1/+1
Previously, the prototype wasn't matching the definition, which has a Processor parameter before the destination address.
2018-08-06memory: Remove unnecessary const qualifiers in prototypesLioncash1-9/+8
These aren't necessary, as value-wise const only matters in the definition.
2018-08-06core_timing: Convert typedef into a type aliasLioncash1-4/+4
Makes the alias a little more readable from left-to-right.
2018-08-06core_timing: Use transparent functors where applicableLioncash1-5/+5
Gets rid of the need to hardcode the type in multiple places. This will now be deduced automatically, based off the elements in the container being provided to the algorithm.
2018-08-06loader: Make AppLoader_NCA rely on directory loading codeZach Hilman4-37/+24
Eliminates duplicate code shared between their Load methods, after all the only difference is how the romfs is handled.
2018-08-05gdbstub: Use type alias for breakpoint mapsLioncash1-37/+42
Rather than having to type out the full std::map type signature, we can just use a straightforward alias. While we're at it, rename GetBreakpointList to GetBreakpointMap, which makes the name more accurate. We can also get rid of unnecessary u64 static_casts, since VAddr is an alias for a u64.
2018-08-05gdbstub: Move all file-static variables into the GDBStub namespaceLioncash1-35/+36
Keeps everything under the same namespace. While we're at it, enclose them all within an inner anonymous namespace.
2018-08-05address_arbiter: Return by value from GetThreadsWaitingOnAddress()Lioncash1-15/+15
In all cases the vector being supplied is empty, so we can just return by value in these instances.
2018-08-05gdbstub: Replace PAddr alias with VAddrLioncash2-14/+14
In all cases, a virtual address is being passed in, not a physical one.
2018-08-05gl_shader_decompiler: Fix TEXS mask and dest.bunnei1-2/+5
2018-08-05audio_core: Implement audren_u audio playback.bunnei5-218/+451
2018-08-05added braces for conditionsDavid Marcec1-2/+3
2018-08-05fix the attrib format for intsDavid Marcec1-2/+7
2018-08-05audio_core: Use s16 where possible for audio samples.bunnei9-36/+27
2018-08-05audio_core: Port codec code from Citra for ADPCM decoding.bunnei5-11/+126
2018-08-05service: Add arp servicesLioncash6-0/+97
Adds the basic skeleton of the arp services based off the information provided by Switch Brew.
2018-08-04service: Remove redundant #pragma once directivesLioncash5-10/+0
These don't do anything within .cpp files (we don't include cpp files, so...)
2018-08-04aes_util: Add static assertion to Transcode() and XTSTranscode() to ensure well-defined behaviorLioncash1-0/+4
These functions should only be given trivially-copyable types.
2018-08-04aes_util: Make CalculateNintendoTweak() an internally linked functionLioncash2-12/+10
This function doesn't directly depend on class state, so it can be hidden entirely from the interface in the cpp file.
2018-08-04aes_util: Make Transcode() a const member functionLioncash2-8/+9
This doesn't modify member state, so it can be made const.
2018-08-04core/crypto: Remove unnecessary includesLioncash4-5/+5
2018-08-04key_manager: Use regular std::string instead of std::string_viewLioncash2-10/+7
The benefit of std::string_view comes from the idea of avoiding copies (essentially acting as a non-owning view), however if we're just going to copy into a local variable immediately, there's not much benefit gained here.
2018-08-04cubeb_sink: Support variable sample_rate and num_channels.bunnei1-15/+25
2018-08-04content_archive: Add support for titlekey cryptographyZach Hilman2-7/+39
2018-08-04audio_core: Sinks need unique names as well.bunnei5-9/+14
2018-08-04audio_core: Streams need unique names for CoreTiming.bunnei5-10/+14
2018-08-04gl_shader_manager: Invert conditional in SetShaderUniformBlockBinding()Lioncash1-7/+9
This lets us indent the majority of the code and places the error case first.
2018-08-04gl_shader_manager: Amend sign differences in an assertion comparison in SetShaderUniformBlockBinding()Lioncash1-3/+2
Ensures both operands have the same sign in the comparison. While we're at it, we can get rid of the redundant casting of ub_size to an int. This type will always be trivial and alias a built-in type (not doing so would break backwards compatibility at a standard level).
2018-08-04renderer_base: Make Rasterizer() return the rasterizer by referenceLioncash5-11/+15
All calling code assumes that the rasterizer will be in a valid state, which is a totally fine assumption. The only way the rasterizer wouldn't be is if initialization is done incorrectly or fails, which is checked against in System::Init().
2018-08-04video_core: Eliminate the g_renderer global variableLioncash19-74/+100
We move the initialization of the renderer to the core class, while keeping the creation of it and any other specifics in video_core. This way we can ensure that the renderer is initialized and doesn't give unfettered access to the renderer. This also makes dependencies on types more explicit. For example, the GPU class doesn't need to depend on the existence of a renderer, it only needs to care about whether or not it has a rasterizer, but since it was accessing the global variable, it was also making the renderer a part of its dependency chain. By adjusting the interface, we can get rid of this dependency.
2018-08-04kernel/thread: Fix potential crashes introduced in 26de4bb521b1ace7af76eff4f6956cb23ac0d58cLioncash3-13/+38
This amends cases where crashes can occur that were missed due to the odd way the previous code was set up (using 3DS memory regions that don't exist).
2018-08-03kernel/process: Use std::array where applicableLioncash1-1/+2
2018-08-03kernel/process: Use accessors instead of class members for referencing segment arrayLioncash5-20/+40
Using member variables for referencing the segments array increases the size of the class in memory for little benefit. The same behavior can be achieved through the use of accessors that just return the relevant segment.
2018-08-03memory: Remove unused GetSpecialHandlers() functionLioncash1-16/+0
This is just unused code, so we may as well get rid of it.
2018-08-03video_core: Remove unimplemented Start() function prototypeLioncash1-3/+0
Given this has no definition, we can just remove it entirely.
2018-08-03gl_shader_decompiler: Remove unused variable in GenerateDeclarations()Lioncash1-2/+0
This variable was being incremented, but we were never actually using it.
2018-08-03gl_shader_manager: Make ProgramManager's GetCurrentProgramStage() a const member functionLioncash1-1/+1
This function doesn't modify class state, so it can be made const.
2018-08-03core/memory: Get rid of 3DS leftoversLioncash16-559/+29
Removes leftover code from citra that isn't needed.
2018-08-03Added ability to change username & language code in the settings ui. Added IProfile::Get and SET::GetLanguageCode for libnx tests (#851)David9-8/+95
2018-08-03yuzu: Use Qt 5 signal/slots where applicableLioncash7-46/+49
Makes the signal/slot connections type-safe instead of string-based.
2018-08-03input_common: Use std::move where applicableLioncash2-5/+6
Avoids unnecessary atomic reference count increments and decrements
2018-08-03input_common: Add missing override specifiersLioncash3-14/+2
2018-08-02Implement RGB32F PixelFormat (#886) (used by Go Vacation)greggameplayer3-9/+23
2018-08-02kernel/vm_manager: Convert loop into std::any_of()Lioncash1-4/+4
2018-08-02kernel/vm_manager: Use const where applicableLioncash3-19/+19
Makes our immutable state explicit.
2018-08-02kernel/vm_manager: Use the VAddr type alias in CarveVMA()Lioncash1-2/+2
These two variables correspond to address ranges.
2018-08-02kernel/thread: Make GetFreeThreadLocalSlot()'s loop indices size_tLioncash1-8/+5
Avoids using a u32 to compare against a range of size_t, which can be a source of warnings. While we're at it, compress a std::tie into a structured binding.
2018-08-02kernel/thread: Make GetFreeThreadLocalSlot() reference parameter a const referenceLioncash1-1/+2
This function only reads the data being referenced, it doesn't modify it, so we can turn the reference into a const reference.
2018-08-02kernel/thread: Make GetFreeThreadLocalSlot() internally linkedLioncash1-1/+1
This function isn't used outside of this translation unit, so we can make it internally linked.
2018-08-02vfs_vector: Remove unused variable in FindAndRemoveVectorElement()Lioncash1-2/+2
This wasn't being used for anything, so it can be removed.
2018-08-02vfs_vector: Avoid unnecessary copies where applicableLioncash1-2/+5
The lambda elements should be taken by const reference here, and we can move the virtual directory passed to ReplaceFileWithSubdirectory()
2018-08-02gl_state: Make texture_units a std::arrayLioncash1-2/+3
Gets rid of the use of a raw C array.
2018-08-02gl_shader_manager: Take ShaderSetup instances by const reference in UseProgrammableVertexShader() and UseProgrammableFragmentShader()Lioncash1-2/+2
Avoids performing unnecessary copies of 65560 byte sized ShaderSetup instances, considering it's only used as part of lookup and not modified. Given the parameters were already const, it's likely taking these parameters by reference was intended but the ampersand was forgotten.
2018-08-02math_util: Always initialize members of RectangleLioncash1-5/+5
Prevents potentially using the members uninitialized.
2018-08-02hw: Remove unused filesLioncash7-334/+0
None of these files are used in any meaningful way. They're just leftovers from citra. Also has the benefit of getting rid of an unused global variable.
2018-08-02service: Add migration servicesLioncash6-0/+55
Adds the basic skeleton for the mig:usr service based off information provided by Switch Brew.
2018-08-02audio_out: Use Buffer::Tag alias in GetTagsAndReleaseBuffers()'s prototypeLioncash2-2/+2
This makes the Buffer::Tag usage consistent with the Stream class's prototype of GetTagsAndReleaseBuffers().
2018-08-02sink_details: Deduplicate long std::function repetitionLioncash1-4/+6
We can just use type aliases to avoid needing to write the same long type twice
2018-08-02sink_details: std::move std::function instancesLioncash1-1/+2
Given std::function is allowed to potentially allocate, these should be std::move'd to prevent potential reallocation (should that ever happen).
2018-08-02kernel: Move object class to its own source filesLioncash44-156/+186
General moving to keep kernel object types separate from the direct kernel code. Also essentially a preliminary cleanup before eliminating global kernel state in the kernel code.
2018-08-02logging/log: Remove incorrect description in PCV doc commentLioncash1-1/+1
PCV isn't the parental control service.
2018-08-02service: Add psc servicesLioncash6-0/+98
Adds the basic skeleton for the psc services based off the information provided by Switch Brew.
2018-08-02video_core: Make global EmuWindow instance part of the base renderer classLioncash13-64/+54
Makes the global a member of the RendererBase class. We also change this to be a reference. Passing any form of null pointer to these functions is incorrect entirely, especially given the code itself assumes that the pointer would always be in a valid state. This also makes it easier to follow the lifecycle of instances being used, as we explicitly interact the renderer with the rasterizer, rather than it just operating on a global pointer.
2018-08-02service/ns: Add missing ns servicesLioncash1-0/+447
Implements the basic skeleton of ns:am2, ns:ec, ns:rid, ns:rt, ns:su, ns:vm, and ns:web based off the information provided by Switch Brew and SwIPC.
2018-08-01lm: Amend name of ILoggerLioncash1-4/+4
Previously this was being registered with the name "Logger". While we're at it, also change the name of the class to match it.
2018-08-01service/filesystem: Add fsp:ldr and fsp:pr servicesLioncash6-0/+89
Adds the basic skeleton for the remaining fsp services based off information provided by Switch Brew.
2018-08-01service: Add capture servicesLioncash6-0/+173
Adds the basic skeleton for the capture services based off information provided by Switch Brew.
2018-08-01service: Add bpc and pcv servicesLioncash8-0/+183
Adds the basic skeleton for the remaining pcv-related services based off information on Switch Brew.
2018-08-01Implement R32_FLOAT RenderTargetFormatUnknown3-0/+5
2018-08-01Add missing parameter to files.push_back()Zach Hilman1-5/+5
2018-08-01Fix merge conflicts with opus and update docsZach Hilman4-6/+8
2018-08-01Use more descriptive error codes and messagesZach Hilman9-34/+101
2018-08-01Use static const instead of const staticZach Hilman1-2/+2
2018-08-01Use ErrorEncrypted where applicable and fix no keys crashZach Hilman4-17/+37
2018-08-01Add missing includes and use const where applicableZach Hilman11-24/+40
2018-08-01Allow key loading from %YUZU_DIR%/keys in addition to ~/.switchZach Hilman5-7/+23
2018-08-01Use SHGetKnownFolderPath instead of SHGetFolderPathAZach Hilman1-3/+4
2018-08-01Make XCI comply to review and style guidelinesZach Hilman16-482/+223
2018-08-01Extract mbedtls to cpp fileZach Hilman5-87/+127
2018-08-01Add missing string.h includeZach Hilman1-0/+1
2018-08-01Update mbedtls and fix compile errorZach Hilman1-0/+1
2018-08-01Remove files that are not usedZach Hilman33-43/+1455
2018-08-01kernel/thread: Remove unimplemented function prototypeLioncash1-6/+0
Given there's no implementation, we may as well remove the code entirely.
2018-08-01audio_core: Add configuration settings.bunnei12-21/+330
2018-08-01service/audio: Add missing servicesLioncash14-2/+289
Adds the missing audctl service, as well as the :a and :d services for audin, audout, audrec, and audren.
2018-07-31kernel: Remove unused object_address_table.cpp/.hLioncash6-104/+0
These source files were entirely unused throughout the rest of the codebase. This also has the benefit of getting rid of a global variable as well.
2018-07-31audout_u: Remove std::move in OpenAudioOutImpl()Lioncash1-1/+1
Previously the code was using the values from params further below after it was std::moved. Thankfully, given AudoutParams is a trivially copyable struct, the values would have simply been copied in this instance and not invalidated to garbage values.
2018-07-31kernel: Remove unnecessary includesLioncash23-28/+47
Removes unnecessary direct dependencies in some headers and also gets rid of indirect dependencies that were being relied on to be included.
2018-07-31service/am: Add missing am servicesLioncash8-0/+156
Adds the basic skeleton for missing am services idle:sys, omm, and spsm based off the information provided by Switch Brew.
2018-07-31service: Add fgm servicesLioncash6-0/+96
Adds the basic skeleton for the fgm services based off the information provided by Switch Brew.
2018-07-31arm_dynarmic: Make SetTlsAddress() prototype and definition consistentLioncash1-1/+1
Makes the definition use the same type aliases as in its prototype.
2018-07-31arm_dynarmic: Remove unnecessary qualifying of ThreadContextLioncash1-3/+3
Given the ARM_Dynarmic class inherits from ARM_Interface, we don't need to qualify here.
2018-07-31arm_dynarmic: Correct initializer list orderLioncash1-5/+3
Amends the initializer list to be in the same order that each variable would be initialized in. We also do this to ensure we don't use a bogus uninitialized instance of the exclusive monitor within MakeJit() We can also remove the jit member from the initializer list as this is initialized by PageTableChanged()
2018-07-31service: Add the pcie serviceLioncash6-0/+85
Adds the basic skeleton of the pcie service based off information on Switch Brew.
2018-07-31audio_core: Implement Sink and SinkStream interfaces with cubeb.bunnei8-6/+261
2018-07-31audio_core: Add interfaces for Sink and SinkStream.bunnei6-0/+163
2018-07-31MacroInterpreter: Avoid left shifting negative values.Subv2-2/+6
The branch target is signed, so multiply by 4 instead of left shifting by 2
2018-07-31nvhost_gpu: Added checks to ensure we don't read past the end of the entries when handling a GPU command list.Subv1-3/+6
2018-07-31nvhost_ctrl_gpu: Only read the input parameters if they are actually there.Subv1-3/+11
Passing nullptr to memcpy is undefined behavior.
2018-07-31Port #3758 from Citra (#852): Add missing std::string import in text_formatterTobias1-0/+1
2018-07-31audio_core: Misc. improvements to stream/buffer/audio_out.bunnei5-20/+32
2018-07-31audio_core: Move to audout_u impl.bunnei4-13/+6
- This is necessary so streams are created on the same thread.
2018-07-31Implemented various hwopus functions (#853)David3-6/+132
2018-07-30Port #3769 from Citra: "Update Dark theme to latest version"Tobias1-1/+1
2018-07-30Add some HID commands (#843)Hexagon121-2/+16
* Added some HID commands * Addressed comments
2018-07-29Port #3732 from Citra: "common: Fix compilation on ARM"Cameron Cawley2-4/+2
2018-07-29remove polymorphism issueB3n301-2/+30
2018-07-29Port #3913 from Citra: "citra_qt: Remove obsolete application attribute"fearlessTobi1-1/+0
2018-07-29common/string_utils: replace boost::transform with std counterpartzhupengfei1-3/+5
Note: according to cppreference it is necessary to convert char to unsigned char when using std::tolower and std::toupper, otherwise the behaviour would be undefined.
2018-07-29Port #3972 from Citra: "common/timer: use std::chrono, avoid platform-dependent code"zhupengfei2-81/+31
2018-07-29Port #3911 from Citra: "Optimize settings application"fearlessTobi5-6/+3
2018-07-29Port #3837 from Citra: "Add build date in about dialog"fearlessTobi2-3/+4
2018-07-29partition_filesystem: Remove dynamic_cast in PrintDebugInfo()Lioncash1-3/+2
We shouldn't be upcasting our file instances. Given a PartitionFilesystem is currently designed to accept any arbitrary VfsFile instances, casting to a more specific type than that is just bad design, and shows an interface design issue.
2018-07-29service: Add wlan servicesLioncash6-1/+194
Adds the basic skeleton for the wlan services based off the information on Switch Brew.
2018-07-29service/btm: Add basic implementation of GetCoreImpl()Lioncash1-1/+35
Based off information on SwIPC and Switch Brew.
2018-07-29service: Add btm servicesLioncash6-0/+108
Adds the skeleton for the btm services based off the information on Switch Brew.
2018-07-28audout: Implement IAudioOut interface with AudioCore.bunnei2-93/+114
2018-07-28core: Add AudioCore to global state.bunnei2-0/+9
2018-07-28audio_core: Add initial code for keeping track of audout state.bunnei8-1/+336
2018-07-28RomFS ExtractionZach Hilman12-20/+351
2018-07-27service: Add ncm servicesLioncash6-0/+80
Adds the basic skeleton for the ncm services based off information on Switch Brew.
2018-07-27service: Add mii servicesLioncash6-0/+128
Adds the skeleton for the mii services based off information provided by Switch Brew
2018-07-27service/nfc: Implement Create[x]Interface functionsLioncash1-4/+43
These simply return the respective interface.
2018-07-27service: Add nfc servicesLioncash6-0/+204
Adds the skeleton of the nfc service based off the information provided on Switch Brew.
2018-07-27service/lbl: Implement EnableVrMode, DisableVrMode and GetVrModeLioncash3-3/+37
Implements these functions according to the information available on Switch Brew.
2018-07-27service: Add the lbl serviceLioncash4-0/+77
Adds the skeleton of the lbl service based off the information provided by Switch Brew.
2018-07-27service: Add the btdrv serviceLioncash4-1/+93
Adds the skeleton for the btdrv service based off the information provided by Switch Brew
2018-07-26service/hid: Add the hidbus, hid:dbg, hid:sys, and hid:tmp servicesLioncash1-0/+220
2018-07-26service/hid: Add the xcd:sys serviceLioncash4-0/+57
2018-07-26service/hid: Add irs servicesLioncash4-0/+75
2018-07-26Port #3594 from CitrafearlessTobi1-0/+16
2018-07-26service: Add the grc:c serviceLioncash4-0/+50
Adds the basic skeleton for the grc:c service based off the information provided by Switch Brew.
2018-07-26GPU: Allow using R16F as a render target format.Subv2-1/+4
2018-07-26kernel/timer: Make data members private where applicableLioncash2-8/+20
Instead, we can just expose functions that return the queryable state instead of letting anything modify it.
2018-07-26Port #3665 from CitrafearlessTobi2-0/+4
2018-07-26Port #3641 from CitrafearlessTobi1-1/+1
2018-07-26service: Add the nim servicesLioncash4-0/+143
Adds the skeleton for the nim services based off information from Switch Brew.
2018-07-26service: Add ldn servicesLioncash6-0/+164
Adds ldn services based off information provided by Switch Brew.
2018-07-26service/sockets: Add ethc:c and ethc:i servicesLioncash4-0/+66
2018-07-26service/sockets: Add missing bsdcfg socket serviceLioncash3-0/+29
2018-07-26service: Add ldr servicesLioncash4-0/+101
Adds the skeleton for the ldr-related services based off the information provided on Switch Brew.
2018-07-26lm: Move LM's class declaration into the cpp fileLioncash2-37/+31
This isn't used directly outside of this translation unit, so we can hide it from external use.
2018-07-26lm: Amend names of Initialize() in Logger and Initialize() in LMLioncash2-7/+7
Amends these to match the information on Switch Brew.
2018-07-26lm: Add missing function entry to Logger's function tableLioncash1-0/+1
2018-07-26service: Add eupld servicesLioncash4-0/+72
Adds the skeleton for the eupld services based off information on Switch Brew.
2018-07-26service: Add the erpt servicesLioncash4-0/+71
Adds the basic skeleton of the erpt service based off information on Switch Brew.
2018-07-26Implement R16_G16Unknown4-19/+100
correct trailing white spaces Delete tabs correct placement Add RG16F & RG16UI & RG16I & RG16S PixelFormats Return correct data according to changes done previously correct PixelFormat declaration correct coding style error correct coding style error part 2 correct RG16S Declaration error correct alignment
2018-07-25service/nvdrv: Take std::string in Open() by const referenceLioncash2-2/+2
Avoids copies from being made, since the string is only ever used for lookup, the data is never transfered anywhere. Ideally, we'd use a std::string_view here, but devices is a std::unordered_map, not a std::map, so we can't use heterogenous lookup here.
2018-07-25service/nvdrv: Use std::move where applicableLioncash1-3/+5
Avoids unnecessary reference count increments and decrements. In one case, we don't need to make a shared_ptr copy at all, just to call a member function.
2018-07-25service/nifm: Deduplicate interface codeLioncash9-141/+30
Rather than having the same code for each nifm service variant, we can centralize it on one class and get rid of a bit of extra code.
2018-07-25service: Add pm servicesLioncash4-0/+90
Adds the skeleton for the process management services based off information on Switch Brew.
2018-07-25wait_tree: Add missing switch case for WaitTreeThread::GetText()Lioncash1-0/+4
We were missing the enum entry for WaitIPC
2018-07-25service: Add the es serviceLioncash4-0/+77
Adds the skeleton for the ETicket service based off the information on Switch Brew
2018-07-25time: Add the time:a serviceLioncash3-10/+11
Given we already have time:s and time:u, we should also have time:a
2018-07-25GPU: Use the right texture format for sRGBA framebuffers.Subv2-9/+17
2018-07-25GPU: Allow the use of Z24S8 as a texture format.Subv1-0/+4
2018-07-25GPU: Implemented the Z32_S8_X24 depth buffer format.Subv4-1/+16
2018-07-25GPU: Allow using Z32 as a texture format.Subv1-0/+4
2018-07-25GPU: Allow the usage of R8 as a render target format.Subv2-0/+4
2018-07-24GPU: Remove the assert that required the CODE_ADDRESS to be 0.Subv1-8/+0
Games usually just leave it at 0 but nouveau sets it to something else. This already works fine, the assert is useless.
2018-07-24GPU: Implemented the R16 and R16F texture formats.Subv3-5/+32
2018-07-24gl_rasterizer: Replace magic number with GL_INVALID_INDEX in SetupConstBuffers()Lioncash1-3/+5
This is just the named constant that OpenGL provides, so we can use that instead of using a literal -1
2018-07-24gl_rasterizer: Use std::string_view instead of std::string when checking for extensionsLioncash1-1/+3
We can avoid heap allocations here by just using a std::string_view instead of performing unnecessary copying of the string data.
2018-07-24gl_rasterizer: Use in-class member initializers where applicableLioncash2-12/+5
We can just assign to the members directly in these cases.
2018-07-24video_core/memory_manager: Replace a loop with std::array's fill() function in PageSlot()Lioncash1-3/+1
We already have a function that does what this code was doing, so let's use that instead.
2018-07-24video_core/memory_manager: Avoid repeated unnecessary page slot lookupsLioncash1-11/+21
We don't need to keep calling the same function over and over again in a loop, especially when the behavior is slightly non-trivial. We can just keep a reference to the looked up location and do all the checking and assignments based off it instead.
2018-07-24deconstructed_rom_directory: Remove unused FindRomFS() functionLioncash1-29/+0
2018-07-24friend: Add friend:m, friend:s, and friend:v servicesLioncash1-0/+3
Given we already have friend:a and friend:u, we should add the remaining services as well.
2018-07-24friend/interface: Add missing CreateDaemonSuspendSessionService() to the function handler tableLioncash1-0/+1
2018-07-24friend: Deduplicate interfacesLioncash6-48/+11
2018-07-24svc: Resolve sign comparison warnings in WaitSynchronization()Lioncash1-4/+7
The loop's induction variable was signed, but we were comparing against an unsigned variable.
2018-07-24svc: Log parameters in SetMemoryAttribute()Lioncash1-1/+3
Provides slightly more context than only logging out the address value.
2018-07-24time: Simplify interface creationLioncash6-64/+15
We can use one instance of the interface instead of duplicating code.
2018-07-24core_timing: Split off utility functions into core_timing_utilMerryMage12-105/+137
2018-07-24CMakeLists: Sort filenamesMerryMage1-9/+9
2018-07-24wait_tree: Silence warning about all code paths not returning a valueLioncash1-0/+3
If code execution hits this spot, something has gone very wrong, so mark the path as unreachable. This silences a warning on MSVC.
2018-07-24set_sys: Implement SetColorSetId()Lioncash2-5/+25
2018-07-24ipc_helper: Add helper member function for popping enum values to RequestParserLioncash1-0/+8
2018-07-24gl_rasterizer: Implement texture border color.bunnei3-11/+11
2018-07-24maxwell_to_gl: Implement Texture::WrapMode::Border.bunnei1-0/+2
2018-07-24GPU: Implement texture format R32F.Subv3-6/+19
2018-07-24arm_dynarmic: Make MakeJit() a const member functionLioncash2-3/+3
This functions doesn't modify instance state, so it can be a made a const member function.
2018-07-24core: Make converting constructors explicit where applicableLioncash5-5/+5
Avoids unwanted implicit conversions. Thankfully, given the large amount of cleanup in past PRs, only this tiny amount is left over to cover.
2018-07-24maxwell_to_gl: Implement VertexAttribute::Type::UnsignedInt.bunnei1-0/+3
2018-07-24apm/interface: Remove redundant declaration of InstallInterfaces()Lioncash1-3/+0
This is already declared in apm/apm.h
2018-07-24mutex: Pass SharedPtr to GetHighestPriorityMutexWaitingThread() by referenceLioncash1-1/+1
The pointed to thread's members are simply observed in this case, so we don't need to copy it here.
2018-07-24VFS Regression and Accuracy Fixes (#776)Zach Hilman5-37/+75
* Regression and Mode Fixes * Review Fixes * string_view correction * Add operator& for FileSys::Mode * Return std::string from SanitizePath * Farming Simulator Fix * Use != With mode operator&
2018-07-24hle_ipc: Make constructors explicit where applicableLioncash2-12/+13
2018-07-24gl_shader_decompiler: Correct return value of WriteTexsInstruction()Lioncash1-2/+2
This should be returning void, not a std::string
2018-07-24ipc_helpers: Make member variables of ResponseBuilder privateLioncash1-5/+6
These aren't used externally at all, so they can be made private.
2018-07-24gl_shader_decompiler: Implement shader instruction TLDS.bunnei1-29/+43
2018-07-24gl_rasterizer_cache: Implement RenderTargetFormat RG32_FLOAT.bunnei5-7/+25
2018-07-24gl_rasterizer_cache: Implement RenderTargetFormat RGBA32_FLOAT.bunnei2-10/+34
2018-07-24gl_rasterizer_cache: Implement RenderTargetFormat BGRA8_UNORM.bunnei4-8/+22
2018-07-24gl_rasterizer_cache: Add missing log statements.bunnei1-0/+2
2018-07-24gl_shader_decompiler: Print instruction value in shader comments.bunnei1-1/+2
2018-07-24gl_shader_decompiler: Check if SetRegister result is ZeroIndex.bunnei1-0/+6
2018-07-24exclusive_monitor: Use consistent type alias for u64Lioncash3-22/+18
Uses the same type aliases we use for virtual addresses, and converts one lingering usage of std::array<uint64_t, 2> to u128 for consistency.
2018-07-24partition_filesystem: Use std::move where applicableLioncash1-3/+3
Avoids copying a std::string instance and avoids unnecessary atomic reference count incrementing and decrementing.
2018-07-23loader: Remove unnecessary constructor call in IdentifyFile()Lioncash1-1/+1
RealVfsFile inherits from VfsFile, the instance from std::make_shared is already compatible with the function argument type, making the copy constructor call unnecessary.
2018-07-23linker: Remove unused parameter from WriteRelocations()Lioncash2-7/+4
is_jump_relocation is never used within the function, so we can just remove it.
2018-07-23nro: Replace inclusion with a forward declarationLioncash2-1/+8
It's sufficient to use a forward declaration instead of a direct inclusion here.
2018-07-23nro: Make bracing consistentLioncash1-10/+24
Makes the code more uniform, and also braces cases where the body of an unbraced conditional travels more than one line.
2018-07-23nro: Make constructor explicitLioncash1-1/+1
Makes it consistent with the other Apploader constructors, and prevents implicit conversions.
2018-07-23nro: Remove unused forward declarationLioncash1-2/+0
This isn't used anywhere in the header.
2018-07-23gl_shader_decompiler: Simplify GetCommonDeclarations()Lioncash1-5/+5
2018-07-23vi: Add std::is_trivially_copyable checks to Read and Write functionsLioncash1-2/+13
It's undefined behavior to memcpy an object that isn't considered trivially copyable, so put a compile-time check in to make sure this doesn't occur.
2018-07-23vi: std::move std::vector in constructors where applicableLioncash1-9/+9
Allows avoiding unnecessary copies of the vector depending on the calling code. While we're at it, remove a redundant no-parameter base constructor call
2018-07-23hle: Remove config_mem.h/.cppLioncash6-102/+0
This is just an unused hold-over from citra, so we can get rid of this to trim off an exposed global, among other things.
2018-07-23hle: Remove shared_page.h/.cppLioncash6-161/+0
This is a holdover from citra that's essentially unused.
2018-07-23set: Add missing log call in GetAvailableLanguageCodeCount()Lioncash1-0/+2
Forgot to include this in 22f448b6327044076959e338811ee576f3dcf093
2018-07-23NRO Assets and NACP file formatZach Hilman5-1/+215
Cleanup Review fixes
2018-07-23set: Implement GetAvailableLanguageCodeCount()Lioncash2-21/+29
This just returns the size of the language code buffer.
2018-07-23set: Correct return code size of value in GetAvailableLanguageCodes()Lioncash1-2/+2
The return code should be 32-bit in size.
2018-07-22string_util: Get rid of separate resize() in CPToUTF16(), UTF16ToUTF8(), CodeToUTF8() and UTF8ToUTF16()Lioncash1-20/+22
There's no need to perform the resize separately here, since the constructor allows presizing the buffer. Also move the empty string check before the construction of the string to make the early out more straightforward.
2018-07-22string_util: Use emplace_back() in SplitString() instead of push_back()Lioncash1-2/+3
This is equivalent to doing: push_back(std::string("")); which is likely not to cause issues, assuming a decent std::string implementation with small-string optimizations implemented in its design, however it's still a little unnecessary to copy that buffer regardless. Instead, we can use emplace_back() to directly construct the empty string within the std::vector instance, eliminating any possible overhead from the copy.
2018-07-22string_util: Remove unnecessary std::string instance in TabsToSpaces()Lioncash2-8/+7
We can just use the variant of std::string's replace() function that can replace an occurrence with N copies of the same character, eliminating the need to allocate a std::string containing a buffer of spaces.
2018-07-22Kernel/SVC: Perform atomic accesses in SignalProcessWideKey as per the real kernel.Subv1-7/+31
2018-07-22Frontend: Check for more required OpenGL extensions during startup.Subv2-2/+24
2018-07-22Implement exclusive monitorMerryMage9-13/+160
2018-07-22gl_shader_decompiler: Remove redundant Subroutine construction in AddSubroutine()Lioncash1-4/+8
We don't need to toss away the Subroutine instance after the find() call and reconstruct another instance with the same data right after it. Particularly give Subroutine contains a std::set.
2018-07-22shader_bytecode: Implement other TEXS masks.bunnei1-5/+9
2018-07-22vfs: Correct file_p variable usage within InterpretAsDirectory()Lioncash1-2/+5
ReplaceFileWithSubdirectory() takes a VirtualFile and a VirtualDir, but it was being passed a string as one of its arguments. The only reason this never caused issues is because this template isn't instantiated anywhere yet. This corrects an issue before it occurs.
2018-07-22file_util, vfs: Use std::string_view where applicableLioncash10-131/+208
Avoids unnecessary construction of std::string instances where applicable.
2018-07-22gl_shader_decompiler: Remove unused state tracking and minor cleanup.bunnei1-78/+15
2018-07-22gl_shader_decompiler: Implement SEL instruction.bunnei2-0/+20
2018-07-22file_util: Remove goto usages from Copy()Lioncash1-24/+14
We can just leverage std::unique_ptr to automatically close these for us in error cases instead of jumping to the end of the function to call fclose on them.
2018-07-22file_util: Use a u64 to represent number of entriesLioncash5-18/+18
This avoids a truncating cast on size. I doubt we'd ever traverse a directory this large, however we also shouldn't truncate sizes away.
2018-07-22file_util: std::move FST entries in ScanDirectoryTree()Lioncash1-1/+1
Avoids unnecessary copies when building up the FST entries.
2018-07-22gl_rasterizer_cache: Blit surfaces on recreation instead of flush and load.bunnei2-2/+86
2018-07-22gl_rasterizer_cache: Use GPUVAddr as cache key, not parameter set.bunnei3-57/+46
2018-07-22gl_rasterizer_cache: Use zeta_width and zeta_height registers for depth buffer.bunnei2-11/+11
2018-07-22gl_rasterizer: Use zeta_enable register to enable depth buffer.bunnei1-2/+2
2018-07-22maxwell_3d: Add depth buffer enable, width, and height registers.bunnei1-2/+14
2018-07-21GPU: Implement the NVGPU_IOCTL_CHANNEL_KICKOFF_PB ioctl2 command.Subv3-6/+34
This behaves quite similarly to the SubmitGPFIFO command. Referenced from Ryujinx. Many thanks to @gdkchan for investigating this!
2018-07-21file_util: Use an enum class for GetUserPath()Lioncash11-73/+85
Instead of using an unsigned int as a parameter and expecting a user to always pass in the correct values, we can just convert the enum into an enum class and use that type as the parameter type instead, which makes the interface more type safe. We also get rid of the bookkeeping "NUM_" element in the enum by just using an unordered map. This function is generally low-frequency in terms of calls (and I'd hope so, considering otherwise would mean we're slamming the disk with IO all the time) so I'd consider this acceptable in this case.
2018-07-21file_util: Remove explicit type from std::min() in GetPathWithoutTop()Lioncash1-1/+1
Given both operands are the same type, there won't be an issue with overload selection that requires making this explicit.
2018-07-21file_util: Remove redundant duplicate return in GetPathWithoutTop()Lioncash1-1/+0
2018-07-21common: Remove synchronized_wrapper.hLioncash2-86/+0
This is entirely unused in the codebase.
2018-07-21file_sys/errors: Remove redundant object constructor callsLioncash1-8/+8
Given we're already constructing the error code, we don't need to call the constructor inside of it.
2018-07-21vfs_real: Remove redundant copying of std::vector instances in GetFiles() and GetSubdirectories()Lioncash1-2/+3
We already return by value, so we don't explicitly need to make the copy.
2018-07-21partition_filesystem, vfs_real: Add missing standard includesLioncash2-0/+4
2018-07-21partition_filesystem, vfs_real: Use std::move in ReplaceFileWithSubdirectory() where applicableLioncash2-2/+3
Avoids unnecessary atomic increment and decrement operations.
2018-07-21partition_filesystem, vfs_real: Use std::distance() instead of subtractionLioncash2-4/+10
This is a little bit more self-documenting on what is being done here.
2018-07-21vfs_offset: Simplify TrimToFit()Lioncash1-1/+2
We can simply use std::clamp() here, instead of using an equivalent with std::max() and std::min().
2018-07-21vfs: Make WriteBytes() overload taking a std::vector pass the std::vector by const referenceLioncash4-4/+4
Given the data is intended to be directly written, there's no need to take the std::vector by value and copy the data.
2018-07-21vfs: Use variable template variants of std::is_trivially_copyableLioncash1-13/+6
Provides the same behavior, but with less writing
2018-07-21vfs: Amend constness on pointers in WriteBytes() and WriteArrays() member functions to be const qualifiedLioncash1-3/+3
These functions don't modify the data being pointed to, so these can be pointers to const data
2018-07-21Loader: Only print the module names and addresses if they actually exist.Subv1-5/+2
2018-07-21CPU: Save and restore the TPIDR_EL0 system register on every context switch.Subv8-0/+39
Note that there's currently a dynarmic bug preventing this register from being written.
2018-07-21arm_interface: Remove unused tls_address member of ThreadContextLioncash3-9/+0
Currently, the TLS address is set within the scheduler, making this member unused.
2018-07-21gl_shader_manager: Replace unimplemented function prototypeLioncash2-3/+3
This was just a linker error waiting to happen.
2018-07-21gpu: Rename Get3DEngine() to Maxwell3D()Lioncash4-14/+17
This makes it match its const qualified equivalent.
2018-07-21video_core: Use nested namespaces where applicableLioncash11-48/+24
Compresses a few namespace specifiers to be more compact.
2018-07-20arm_test_common: Get rid of truncation warningsLioncash1-2/+5
Explicitly cast the value to a u8 to show that this is intentional.
2018-07-20arm_test_common: Make file static variable a member variable of the testing environmentLioncash2-2/+5
Gets rid of file-static behavior.
2018-07-20arm_test_common: Add missing header guardLioncash1-0/+2
2018-07-20param_package: Take std::string by value in string-based Set() functionLioncash2-4/+6
Allows avoiding string copies by letting the strings be moved into the function calls.
2018-07-20param_package: Use std::unordered_map's insert_or_assign instead of map indexingLioncash1-3/+3
This avoids a redundant std::string construction if a key doesn't exist in the map already. e.g. data[key] requires constructing a new default instance of the value in the map (but this is wasteful, since we're already setting something into the map over top of it).
2018-07-20param_package: Get rid of file-static std::string constructionLioncash1-3/+4
Avoids potential dynamic allocation occuring during program launch
2018-07-20logging/filter: Use std::string_view in ParseFilterString()Lioncash2-41/+40
Allows avoiding constructing std::string instances, since this only reads an arbitrary sequence of characters. We can also make ParseFilterRule() internal, since it doesn't depend on any private instance state of Filter
2018-07-20logging/backend: Add missing standard includesLioncash2-4/+3
A few inclusions were being satisfied indirectly. To prevent breakages in the future, include these directly.
2018-07-20logging/backend: Use std::string_view in RemoveBackend() and GetBackend()Lioncash2-12/+13
These can just use a view to a string since its only comparing against two names in both cases for matches. This avoids constructing std::string instances where they aren't necessary.
2018-07-20apm: Improve stub for GetPerformanceConfiguration.bunnei1-1/+16
2018-07-20ipc_helpers: Add PushEnum() member function to ResponseBuilderLioncash1-0/+19
Allows pushing strongly-typed enum members without the need to always cast them at the call sites. Note that we *only* allow strongly-typed enums in this case. The reason for this is that strongly typed enums have a guaranteed defined size, so the size of the data being pushed is always deterministic. With regular enums this can be a little more error-prone, so we disallow them. This function simply uses the underlying type of the enum to determine the size of the data. For example, if an enum is defined as: enum class SomeEnum : u16 { SomeEntry }; if PushEnum(SomeEnum::SomeEntry); is called, then it will push a u16-size amount of data.
2018-07-20HLE/ACC: Stub IManagerForApplication::GetAccountId to return an error.Subv1-6/+8
And make IManagerForApplication::CheckAvailability always return false. Returning a bogus id from GetAccountId causes games to crash on boot. We should investigate this with a hwtest and either stub it properly or implement it.
2018-07-20gl_state: Make references const where applicable in Apply()Lioncash1-2/+3
2018-07-20gl_state: Get rid of mismatched sign conversionsLioncash1-14/+17
While we're at it, amend the loop variable type to be the same width as that returned by the .size() call.
2018-07-20loader/{nca, nro}: std::move VirtualFile in the constructors where applicableLioncash2-2/+4
This avoids unnecessary atomic reference count increments and decrements
2018-07-20vfs_offset: std::move file and name parameters of OffsetVfsFileLioncash2-3/+5
Avoids potentially unnecessary atomic reference count incrementing and decrementing, as well as string copying.
2018-07-20audren_u: Use a std::array instead of std::string for holding the audio interface/device nameLioncash1-2/+4
std::string doesn't include the null-terminator in its data() + size() range. This ensures that the null-terminator will also be written to the buffer
2018-07-20audout_u: Use a std::array instead of std::string for holding the audio interface nameLioncash1-1/+2
Uses a type that doesn't potentially dynamically allocate, and ensures that the name of the interface is properly null-terminated when writing it to the buffer.
2018-07-20maxwell_3d: Remove unused variable within GetStageTextures()Lioncash1-2/+0
2018-07-20thread: Convert ThreadStatus into an enum classLioncash10-93/+92
Makes the thread status strongly typed, so implicit conversions can't happen. It also makes it easier to catch mistakes at compile time.
2018-07-20partition_filesystem: Return pfs_dirs member variable within GetSubdirectories()Lioncash1-1/+1
This should be returned here, otherwise pfs_dirs is effectively only ever added to, but never read.
2018-07-20nso: Silence implicit sign conversion warningsLioncash1-4/+6
2018-07-20nso: Remove unused function ReadSegment()Lioncash1-13/+0
2018-07-20gl_shader_decompiler: Eliminate variable and declaration shadowingLioncash1-6/+4
Ensures that no identifiers are being hidden, which also reduces compiler warnings.
2018-07-20gl_shader_decompiler: Remove unnecessary const from return valuesLioncash1-2/+2
This adds nothing from a behavioral point of view, and can inhibit the move constructor/RVO
2018-07-20pl_u: Simplify WriteBuffer() calls in GetSharedFontInOrderOfPriority()Lioncash1-3/+3
With the new overload, we can simply pass the container directly.
2018-07-19HLE/ACC: Return an IProfile that is consistent with what was requested.Subv1-5/+15
The default username for now is "yuzu". We should eventually allow the creation of users in the emulator and have the ability to modify their parameters.
2018-07-19HLE/ACC: Change the default user id to be consistent with what we tell games on startup.Subv1-2/+1
In IApplicationFunctions::PopLaunchParameter we tell the games that they were launched as user id 1.
2018-07-19HLE/ACC: Write a single whole user id in ListAllUsers and ListOpenUsers.Subv1-4/+6
We only emulate a single user id for now.
2018-07-19hle_ipc: Introduce generic WriteBuffer overload for multiple container typesLioncash5-10/+25
This introduces a slightly more generic variant of WriteBuffer(). Notably, this variant doesn't constrain the arguments to only accepting std::vector instances. It accepts whatever adheres to the ContiguousContainer concept in the C++ standard library. This essentially means, std::array, std::string, and std::vector can be used directly with this interface. The interface no longer forces you to solely use containers that dynamically allocate. To ensure our overloads play nice with one another, we only enable the container-based WriteBuffer if the argument is not a pointer, otherwise we fall back to the pointer-based one.
2018-07-19pl_u: Specify correct size for buffers in GetSharedFontInOrderOfPriority()Lioncash1-3/+3
This WriteBuffer overload expects its size argument to be in bytes, not elements.
2018-07-19svc: Correct always true assertion case in SetThreadCoreMaskLioncash1-3/+4
The reason this would never be true is that ideal_processor is a u8 and THREADPROCESSORID_DEFAULT is an s32. In this case, it boils down to how arithmetic conversions are performed before performing the comparison. If an unsigned value has a lesser conversion rank (aka smaller size) than the signed type being compared, then the unsigned value is promoted to the signed value (i.e. u8 -> s32 happens before the comparison). No sign-extension occurs here either. An alternative phrasing: Say we have a variable named core and it's given a value of -2. u8 core = -2; This becomes 254 due to the lack of sign. During integral promotion to the signed type, this still remains as 254, and therefore the condition will always be true, because no matter what value the u8 is given it will never be -2 in terms of 32 bits. Now, if one type was a s32 and one was a u32, this would be entirely different, since they have the same bit width (and the signed type would be converted to unsigned instead of the other way around) but would still have its representation preserved in terms of bits, allowing the comparison to be false in some cases, as opposed to being true all the time. --- We also get rid of two signed/unsigned comparison warnings while we're at it.
2018-07-19pl_u: Remove printf specifier in log call in a log call in GetSharedFontInOrderOfPriority()Lioncash1-1/+1
This can just use the fmt specifiers and be type-agnostic.
2018-07-19gdbstub: Get rid of a few signed/unsigned comparisonsLioncash1-7/+7
Ensures both operands in comparisons are the same signedness.
2018-07-19hid: Use a ranged-for loops in UpdatePadCallbackLioncash1-7/+3
Modernizes the loops themselves while also getting rid of a signed/unsigned comparison in a loop condition.
2018-07-19hid: Use HID_NUM_LAYOUTS constant for indicating size of the layouts arrayLioncash1-1/+1
Gets rid of the use of a magic constant
2018-07-19Filesystem: Return EntryType::Directory for the root directory.Subv1-0/+4
It is unknown if this is correct behavior, but it makes sense and fixes a regression with Stardew Valley.
2018-07-19loader: Amend Doxygen commentsLioncash2-5/+5
These weren't adjusted when VFS was introduced
2018-07-19loader/nso: Check if read succeeded in IdentifyFile() before checking magic valueLioncash1-4/+6
We should always assume the filesystem is volatile and check each IO operation. While we're at it reorganize checks so that early-out errors are near one another.
2018-07-19hle/service: Make constructors explicit where applicableLioncash22-25/+25
Prevents implicit construction and makes these lingering non-explicit constructors consistent with the rest of the other classes in services.
2018-07-19nvflinger: Emplace Display instances directlyLioncash1-9/+4
We can use emplace_back to construct the Display instances directly, instead of constructing them separately and copying them, avoiding the need to copy std::string and std::vector instances that are part of the Display struct.
2018-07-19nvdrv: Take std::string by const reference in GetDevice()Lioncash1-1/+1
This is only ever used as a lookup into the device map, so we don't need to take the std::string instance by value here.
2018-07-19hle_ipc: Amend usage of buffer_index within one of HLERequestContext's WriteBuffer() overloadsLioncash1-1/+1
Previously, the buffer_index parameter was unused, causing all writes to use the buffer index of zero, which is not necessarily what is wanted all the time. Thankfully, all current usages don't use a buffer index other than zero, so this just prevents a bug before it has a chance to spring.
2018-07-19fsp_srv: Remove unnecessary vector construction in IFile's Write() functionLioncash1-2/+3
We can avoid constructing a std::vector here by simply passing a pointer to the original data and the size of the copy we wish to perform to the backend's Write() function instead, avoiding copying the data where it's otherwise not needed.
2018-07-19fsp_srv: Remove unnecessary std::vector construction in IDirectory's Read() functionLioncash1-10/+8
We were using a second std::vector as a buffer to convert another std::vector's data into a byte sequence, however we can just use pointers to the original data and use them directly with WriteBuffer, which avoids copying the data at all into a separate std::vector. We simply cast the pointers to u8* (which is allowed by the standard, given std::uint8_t is an alias for unsigned char on platforms that we support).
2018-07-19filesystem: std::move VirtualDir instance in VfsDirectoryServiceWrapper's constructorLioncash1-1/+3
Avoids unnecessary atomic reference count incrementing and decrementing
2018-07-19filesystem: Use std::string's empty() function instead of comparing against a literalLioncash1-1/+1
This is simply a basic value check as opposed to potentially doing string based operations (unlikely, but still, avoiding it is free).
2018-07-19filesystem: Remove pragma disabling global optimizationsLioncash1-2/+0
This was just an artifact missed during PR review.
2018-07-19fsp_srv: Make IStorage constructor explicitLioncash1-1/+1
Prevents implicit conversions.
2018-07-19fsp_srv: Add missing includesLioncash1-0/+5
Gets rid of relying on indirect inclusions.
2018-07-19fsp_srv: Resolve sign-mismatch warnings in assertion comparisonsLioncash1-3/+3
2018-07-19fsp_srv: Respect write length in Write()Lioncash1-4/+5
Previously we were just copying the data whole-sale, even if the length was less than the total data size. This effectively makes the actual_data vector useless, which is likely not intended. Instead, amend this to only copy the given length amount of data. At the same time, we can avoid zeroing out the data before using it by passing iterators to the constructor instead of a size.
2018-07-19common/swap: Remove unnecessary const on return value of swap()Lioncash1-1/+1
2018-07-19common/swap: Use static_cast where applicableLioncash1-16/+16
2018-07-19common/swap: Use using aliases where applicableLioncash1-33/+33
2018-07-19common/common_funcs: Remove unused rotation functionsLioncash1-38/+0
These are unused and essentially don't provide much benefit either. If we ever need rotation functions, these can be introduced in a way that they don't sit in a common_* header and require a bunch of ifdefing to simply be available
2018-07-19common/misc: Deduplicate code in GetLastErrorMsg()Lioncash2-12/+8
Android and macOS have supported thread_local for quite a while, but most importantly is that we don't even really need it. Instead of using a thread-local buffer, we can just return a non-static buffer as a std::string, avoiding the need for that quality entirely.
2018-07-19file_util: return string by const reference for GetExeDirectory()Lioncash2-2/+2
This disallows modifying the internal string buffer (which shouldn't be modified anyhow).
2018-07-19string_util: Remove AsciiToHex()Lioncash2-15/+0
Easy TODO
2018-07-19savedata_factory: Make SaveDataDescriptor's DebugInfo() function a const member functionLioncash2-2/+2
This function doesn't alter class state.
2018-07-19partition_filesystem: Ensure all class members of PartitionFilesystem are initializedLioncash2-24/+15
Previously is_hfs and pfs_header members wouldn't be initialized in the constructor, as they were stored in locals instead. This would result in things like GetName() and PrintDebugInfo() behaving incorrectly. While we're at it, initialize the members to deterministic values as well, in case loading ever fails.
2018-07-19gl_state: Temporarily disable culling and depth test.bunnei1-1/+3
2018-07-19content_archive: Make IsDirectoryExeFS() take a shared_ptr as a const referenceLioncash1-1/+1
There's no need to take this by value when it's possible to avoid unnecessary copies entirely like this.
2018-07-19content_archive: Add missing standard includesLioncash1-0/+5
2018-07-19content_archive: std::move VirtualFile in NCA's constructorLioncash1-1/+4
Gets rid of unnecessary atomic reference count incrementing and decrementing.
2018-07-19vfs: Deduplicate accumulation code in VfsDirectory's GetSize()Lioncash1-6/+6
We can just use a generic lambda to avoid writing the same thing twice.
2018-07-19loader/nro: Resolve sign mismatch warningsLioncash1-1/+1
2018-07-19loader/nso: Remove unnecessary vector resizesLioncash1-4/+2
We can just initialize these vectors directly via their constructor.
2018-07-19loader/nso: Resolve sign mismatch warningsLioncash1-1/+1
2018-07-19decoders: Fix calc of swizzle image_width_in_gobs.bunnei1-1/+4
2018-07-19Virtual Filesystem 2: Electric Boogaloo (#676)Zach Hilman54-1959/+1926
* Virtual Filesystem * Fix delete bug and documentate * Review fixes + other stuff * Fix puyo regression
2018-07-19core/memory: Remove unused function GetSpecialHandlers() and an unused variable in ZeroBlock()Lioncash1-7/+0
2018-07-19address_arbiter: Correct assignment within an assertion statement in WakeThreads()Lioncash1-1/+1
This was introduced within 4f81bc4e1bd12e4df7410c6790ba818d8dbba9c0, and considering there's no comment indicating that this is intentional, this is very likely a bug.
2018-07-19service/prepo: Add missing header guardLioncash1-0/+2
2018-07-19vm_manager: Add missing commas to string literal array elements in GetMemoryStateName()Lioncash1-22/+12
Without these, this would perform concatenation, which is definitely not what we want here.
2018-07-19core/memory, core/hle/kernel: Use std::move where applicableLioncash9-16/+26
Avoids pointless copies
2018-07-19core: Make System's default constructor privateLioncash2-0/+4
This makes it a compilation error to construct additional instances of the System class directly, preventing accidental wasteful constructions over and over.
2018-07-19core: Don't construct instance of Core::System, just to access its live instanceLioncash5-22/+22
This would result in a lot of allocations and related object construction, just to toss it all away immediately after the call. These are definitely not intentional, and it was intended that all of these should have been accessing the static function GetInstance() through the name itself, not constructed instances.
2018-07-18externals: update fmt to version 5.1.0Lioncash1-1/+1
Previously, we were on 4.1.0, which was a major version behind.
2018-07-18hle/filesystem: Amend trace log in OpenSaveData() to compile in debug modeLioncash1-1/+1
Previously this wouldn't compile, since no such function named SaveStructDebugInfo() exists.
2018-07-18game_list: Make ContainsAllWords an internally linked non-member functionLioncash2-2/+1
This function actually depends on no internal class state, so it doesn't even need to be a part of the class interface.
2018-07-18Fill in more fields in TouchScreenEntryTouchZach Hilman1-4/+9
2018-07-18Single touch supportZach Hilman1-4/+19
2018-07-18telemetry: Remove unnecessary Field constructorLioncash1-4/+1
We can just take the value parameter by value which allows both moving into it, and copies at the same time, depending on the calling code.
2018-07-18telemetry: Make operator== and operator!= const member functions of FieldLioncash1-2/+2
These operators don't modify internal class state, so they can be made const member functions. While we're at it, drop the unnecessary inline keywords. Member functions that are defined in the class declaration are already inline by default.
2018-07-18telemetry: Default copy/move constructors and assignment operatorsLioncash1-14/+4
This provides the equivalent behavior, but without as much boilerplate. While we're at it, explicitly default the move constructor, since we have a move-assignment operator defined.
2018-07-18game_list: Upper-case containsAllWords to ContainsAllWords()Lioncash2-3/+3
This makes it consistent with most of the other private utility functions.
2018-07-18game_list: Make containsAllWords a const member functionLioncash2-4/+6
This doesn't actually modify the internal class state, so it can be a const member function. While we're at it, amend the function to take its arguments by const reference.
2018-07-18game_list: Remove unnecessary QString initialization in KeyReleaseEaterLioncash1-4/+1
QString initializes to an empty string by default, so this does nothing meaningful. While we're at it, use a constructor initializer list for initializing the gamelist member variable.
2018-07-18astc: Initialize vector size directly in DecompressLioncash1-2/+1
There's no need to perform a separate resize.
2018-07-18astc: Mark functions as internally linked where applicableLioncash1-17/+20
2018-07-18astc: const-correctness changes where applicableLioncash1-14/+13
A few member functions didn't actually modify class state, so these can be amended as necessary.
2018-07-18astc: Delete Bits' copy contstructor and assignment operatorLioncash1-8/+6
This also potentially avoids warnings, considering the copy assignment operator is supposed to have a return value.
2018-07-18astc: In-class initialize member variables where appropriateLioncash1-39/+22
2018-07-18settings: Turn docked mode off by default.bunnei3-3/+3
2018-07-18vi: Change TransactionId::CancelBuffer to LOG_CRITICAL.bunnei1-1/+1
2018-07-18vi: Fix size for ListDisplays default display.bunnei1-2/+2
2018-07-18vi: Partially implement buffer crop parameters.bunnei9-14/+46
2018-07-17GPU: Added register definitions for the stencil parameters.Subv1-2/+25
2018-07-17General Filesystem and Save Data Fixes (#670)Zach Hilman16-212/+256
2018-07-17nvflinger: Fix for BufferQueue event handling.bunnei6-32/+21
2018-07-17Kernel/Arbiter: Fix bug in WaitIfLessThanMichael Scire1-2/+4
2018-07-16scheduler: Clear exclusive state when switching contextsMerryMage6-0/+11
2018-07-15HID: Update controllers less oftenJames Rowe1-3/+3
2018-07-15Logging: Dump all logs in the queue on close in debug modeJames Rowe3-1/+12
2018-07-15gl_rasterizer_cache: Implement texture format G8R8.bunnei3-9/+40
2018-07-15gl_rasterizer_cache: Fix incorrect offset in ConvertS8Z24ToZ24S8.bunnei1-1/+2
2018-07-15gl_rasterizer_cache: Implement depth format Z16_UNORM.bunnei3-1/+15
2018-07-14Logging: Don't lock the queue for the duration of the writeJames Rowe1-3/+5
2018-07-14Services/BSD: Corrected the return for StartMonitoring according to SwIPC.Subv1-2/+1
2018-07-14FileSys: Append the requested path to the filesystem base path in DeleteFile.Subv1-2/+4
We were trying to delete things in the current directory instead of the actual filesystem directory. This may fix some savedata issues in some games.
2018-07-14No need to use ASSERT_MSG with an empty messageDavid Marcec1-2/+2
2018-07-14OpenGL: Use MakeCurrent/DoneCurrent for multithreaded rendering.bunnei6-2/+39
2018-07-14GPU: Always enable the depth write when clearing the depth buffer.Subv1-3/+8
The GPU ignores that register when clearing, but OpenGL obeys the glDepthMask parameter, so we set the depth mask to GL_TRUE when clearing the depth buffer. It will be restored to the correct value automatically on the next draw call.
2018-07-13More improvements to GDBStub (#653)Hedges8-50/+173
* More improvements to GDBStub - Debugging of threads should work correctly with source and assembly level stepping and modifying registers and memory, meaning threads and callstacks are fully clickable in VS. - List of modules is available to the client, with assumption that .nro and .nso are backed up by an .elf with symbols, while deconstructed ROMs keep N names. - Initial support for floating point registers. * Tidy up as requested in PR feedback * Tidy up as requested in PR feedback
2018-07-13gl_rasterizer: Fix check for if a shader stage is enabled.bunnei3-35/+11
2018-07-13gl_shader_gen: Implement dual vertex shader mode.bunnei5-55/+139
- When VertexA shader stage is enabled, we combine with VertexB program to make a single Vertex Shader stage.
2018-07-13We only need to alert for memory pool changesDavid Marcec1-2/+0
2018-07-13initialized voice status and unused sizes in the update data headerDavid Marcec1-1/+3
2018-07-13gl_shader_decompiler: Implement PredCondition::LessThanWithNan.bunnei2-5/+7
2018-07-13gl_shader_decompiler: Use FlowCondition field in EXIT instruction.bunnei2-8/+34
2018-07-12GPU: Implement the FADD32I shader instruction.Subv2-0/+32
2018-07-12Port #3335 and #3373 from Citra: "Small SDL fixes" and "Print the actual error preventing SDL from working" (#637)Tobias2-6/+4
* Port #3335 and #3373 from Citra * Fixup: Use the new logging placeholders
2018-07-12GPU: Corrected the decoding of FFMA for immediate operands.Subv1-1/+1
2018-07-12yuzu - Fix duplicate logsJames Rowe2-2/+7
2018-07-12yuzu-cmd Apply the filter string from settingsJames Rowe1-2/+1
2018-07-12Audout "Auto" functionsDavid Marcec2-14/+14
Audout autos are identical to their counterpart except for the buffer type which yuzu already handles for us.
2018-07-12Added IsWirelessCommunicationEnabled, IsEthernetCommunicationEnabled, IsAnyInternetRequestAcceptedDavid Marcec1-3/+21
Since we have no socket implementation we should be returning 0 to indicate we're currently offline.
2018-07-11hid: Fix timestamps and controller type.bunnei1-7/+5
- This fixes user input in SMO.
2018-07-10NvOsGetConfigU32 production implDavid Marcec1-17/+2
Settings are only used when RMOS_SET_PRODUCTION_MODE is set to 0. If production mode is set, the error code 0x30006 is returned instead
2018-07-08savedata_factory: Always create a save directory for games.bunnei1-0/+9
2018-07-08nvhost_ctrl: Fix NvOsGetConfigU32 for Snipper Clips.bunnei1-1/+1
2018-07-08gl_rasterizer: Flip triangles when regs.viewport_transform[0].scale_y is negative.bunnei1-1/+4
- Fixes a regression with Binding of Isaac.
2018-07-08Revert "Virtual Filesystem (#597)"bunnei45-1784/+1676
This reverts commit 77c684c1140f6bf3fb7d4560d06d2efb1a2ee5e2.
2018-07-07GPU: Implemented the BC7U texture format.Subv3-7/+21
Note: Our version of glad exports GL_COMPRESSED_RGBA_BPTC_UNORM as GL_COMPRESSED_RGBA_BPTC_UNORM_ARB, maybe it's time we update it.
2018-07-07Port #3474 from CitrafearlessTobi1-1/+1
2018-07-07Port #3505 from CItrafearlessTobi1-6/+7
2018-07-07Port #3579 from CitrafearlessTobi3-7/+7
2018-07-06Virtual Filesystem (#597)Zach Hilman45-1676/+1784
* Add VfsFile and VfsDirectory classes * Finish abstract Vfs classes * Implement RealVfsFile (computer fs backend) * Finish RealVfsFile and RealVfsDirectory * Finished OffsetVfsFile * More changes * Fix import paths * Major refactor * Remove double const * Use experimental/filesystem or filesystem depending on compiler * Port partition_filesystem * More changes * More Overhaul * FSP_SRV fixes * Fixes and testing * Try to get filesystem to compile * Filesystem on linux * Remove std::filesystem and document/test * Compile fixes * Missing include * Bug fixes * Fixes * Rename v_file and v_dir * clang-format fix * Rename NGLOG_* to LOG_* * Most review changes * Fix TODO * Guess 'main' to be Directory by filename
2018-07-06Remove some references to CitrafearlessTobi3-3/+3
2018-07-05GPU: Allow using the old NV04 values for the depth test function.Subv2-9/+29
These seem to be just a valid as the GL token values. Thanks @ReinUsesLisp This restores graphical output to Disgaea 5
2018-07-04GPU: Implemented the IMNMX shader instruction.Subv2-3/+31
It's similar to the FMNMX instruction but it works on integers.
2018-07-04GPU: Implemented the F2F 'round' rounding mode.Subv1-0/+3
It's implemented via the GLSL 'roundEven()' function.
2018-07-04GPU: Stub the shader SYNC and DEPBAR instructions.Subv2-0/+12
It is unknown at this moment if we actually need to do something with these instructions or if the GLSL compiler takes care of that for us.
2018-07-04GPU: Implement the Size_16_16 and Size_10_10_10_2 vertex attribute types.Subv1-0/+8
Both signed and unsigned variants.
2018-07-04GPU: Ignore textures that the GLSL compiler deemed unused when binding textures to the shaders.Subv1-1/+4
2018-07-04GPU: Corrected the decoding for the TEX shader instruction.Subv1-1/+1
2018-07-04GPU: Implemented the PSETP shader instruction.Subv2-0/+43
It's similar to the isetp and fsetp instructions but it works on predicates instead.
2018-07-04GPU: Implemented the 32 bit float depth buffer format.Subv3-2/+15
2018-07-04GPU: Flip the triangle front face winding if the GPU is configured to not flip the triangles.Subv2-3/+29
OpenGL's default behavior is already correct when the GPU is configured to flip the triangles. This fixes 1-2 Switch's splash screen.
2018-07-04GPU: Only configure the used framebuffers during clear.Subv4-17/+48
Don't try to configure the color buffer if it is not being cleared, it may not be completely valid at this point.
2018-07-03GPU: Factor out the framebuffer configuration code for both Clear and Draw commands.Subv2-72/+39
2018-07-03GPU: Support clears that don't clear the color buffer.Subv2-6/+17
2018-07-03GPU: Bind and clear the render target when the CLEAR_BUFFERS register is written to.Subv4-0/+86
2018-07-03GPU: Added registers for the CLEAR_BUFFERS and CLEAR_COLOR methods.Subv1-2/+27
2018-07-03gl_rasterizer_cache: Implement PixelFormat S8Z24.bunnei3-11/+83
2018-07-03Update AudioRenderer Voice Sections (#614)David1-0/+87
* voice section updating * fixed slight offset miscalculation * fixed overflow
2018-07-03gl_rasterizer: Only set cull mode and front face if enabled.bunnei1-2/+5
2018-07-03GPU: Use only the least significant 3 bits when reading the depth test func.Subv1-9/+9
Some games set the full GL define value here (including nouveau), but others just seem to set those last 3 bits.
2018-07-03GPU: Don't try to parse the depth test function if the depth test is disabled.Subv1-0/+4
2018-07-03Fix build and address review feedbackbunnei2-4/+5
2018-07-03Add configurable logging backendsJames Rowe14-22/+408
2018-07-03Update clang formatJames Rowe37-154/+141
2018-07-03Rename logging macro back to LOG_*James Rowe105-730/+730
2018-07-03GPU: Set up the culling configuration on each draw.Subv1-6/+8
2018-07-03GPU: Implemented MUFU suboperation 8, sqrt.Subv2-0/+5
2018-07-02GPU: Set up the depth test state on every draw.Subv2-0/+14
2018-07-02MaxwellToGL: Added conversion functions for depth test and cull mode.Subv1-0/+50
2018-07-02GPU: Added registers for depth test and cull mode.Subv1-3/+51
2018-07-02GPU: Implemented the Z24S8 depth format and load the depth framebuffer.Subv7-24/+124
2018-07-02GPU: Implement offsetted rendering when using non-indexed drawing.Subv1-1/+1
2018-07-02GPU: Fixed the index offset rendering, and implemented the base vertex functionality.Subv1-6/+8
This fixes Stardew Valley.
2018-07-02GPU: Added register definitions for the vertex buffer base element.Subv1-1/+6
2018-07-02GPU: Directly copy the pixels when performing a same-layout DMA.Subv1-1/+5
2018-07-02GPU: Ignore disabled textures and textures with an invalid address.Subv2-1/+10
2018-07-02GPU: Allow GpuToCpuAddress to return boost::none for unmapped addresses.Subv1-2/+2
2018-07-01GPU: Remove a surface from the cache when its backing memory is being unmapped from the GPU's MMU.Subv1-0/+5
2018-07-01nvmap: Return the address of the nvmap object when Freeing it for the last time.Subv2-4/+11
This behavior is confirmed by reverse engineering.
2018-06-30GPU: Corrected the size of the MUFU subop field, and removed incorrect "min" operation.Subv2-6/+1
2018-06-30GPU: Implemented the RGBA32_UINT rendertarget format.Subv4-9/+28
2018-06-30GLCache: Specify the component type along the texture type in the format tuple.Subv1-17/+21
2018-06-30gl_shader_decompiler: Implement predicate NotEqualWithNan.bunnei2-17/+24
2018-06-29gl_rasterizer_cache: Only dereference color_surface/depth_surface if valid.bunnei1-2/+6
2018-06-27gl_shader_decompiler: Add a return path for unknown instructions.bunnei1-0/+1
2018-06-27gl_rasterizer_cache: Implement caching for texture and framebuffer surfaces.bunnei3-16/+168
gl_rasterizer_cache: Improved cache management based on Citra's implementation. gl_surface_cache: Add some docstrings.
2018-06-27gl_rasterizer_cache: Various fixes for ASTC handling.bunnei2-35/+39
2018-06-27gl_rasterizer_cache: Use SurfaceParams as a key for surface caching.bunnei2-43/+72
2018-06-27maxwell_3d: Add a struct for RenderTargetConfig.bunnei1-17/+19
2018-06-27settings: Add a configuration for use_accurate_framebuffers.bunnei7-0/+21
2018-06-27gl_rasterizer: Implement AccelerateDisplay to forward textures to framebuffers.bunnei6-8/+62
2018-06-27gl_rasterizer_cache: Cache size_in_bytes as a const per surface.bunnei2-9/+13
2018-06-27gl_rasterizer_cache: Refactor to make SurfaceParams members const.bunnei2-52/+37
2018-06-27gl_rasterizer_cache: Remove Citra's rasterizer cache, always load/flush surfaces.bunnei4-1494/+210
2018-06-27gl_rasterizer: Workaround for when exceeding max UBO size.bunnei2-1/+7
2018-06-26gl_state: Fix state management for texture swizzle.bunnei5-12/+20
2018-06-26gl_state: Remove unused state management from 3DS.bunnei2-94/+0
2018-06-26gl_rasterizer_cache: Fix inverted B5G6R5 format.bunnei1-1/+1
2018-06-26yuzu: Remove SSBOs check from Qt frontend.bunnei1-2/+0
2018-06-25Fix crash at exitmailwl1-2/+4
2018-06-25Send the correct RequestUpdateAudioRenderer revision in the output header (#587)David1-1/+1
* We should be returning our revision instead of what is requested. Hardware test on a 5.1.0 console * Added sysversion comment
2018-06-25Service/Audio: add hwopus service, stub GetWorkBufferSize functionmailwl4-0/+53
2018-06-24Removed duplicate structs, changed AudioRendererResponse -> UpdateDataHeader (#583)David2-34/+21
* Removed duplicate structs, changed AudioRendererResponse -> UpdateDataHeader According to game symbols(SMO), there's references to UpdateDataHeader which seems to be what AudioRendererResponse actually is * oops * AudioRendererParameters should be AudioRendererParameter according to SMO
2018-06-23Fixed RequestUpdateAudioRenderer deadlocks and calculated section sizes properly (#580)David2-44/+76
* Fixed RequestUpdateAudioRenderer deadlocks and calculated section sizes properly This fixes RequestUpdateAudioRenderer deadlocks in games like Puyo Puyo Tetris and games which require a proper section size in games such as Retro City Rampage. This fixes causes various games to start rendering or trying to render
2018-06-22IPC: skip empty buffer writemailwl1-0/+5
prevent yuzu crash, if games, like Axiom Verge, trying to read 0 bytes from file
2018-06-22Kernel/Arbiters: Fix casts, cleanup comments/magic numbersMichael Scire4-17/+27
2018-06-22Add additional missing format.Michael Scire2-21/+27
2018-06-22Run clang-format on PR.Michael Scire3-180/+181
2018-06-22Kernel/Arbiters: HLE is atomic, adjust code to reflect that.Michael Scire2-37/+13
2018-06-21Add support for decrypted NCA files (#567)Zach Hilman10-16/+453
* Start to add NCA support in loader * More nca stuff * More changes to nca.cpp * Now identifies decrypted NCA cont. * Game list fixes and more structs and stuff * More updates to Nca class * Now reads ExeFs (i think) * ACTUALLY LOADS EXEFS! * RomFS loads and games execute * Cleanup and Finalize * plumbing, cleanup and testing * fix some things that i didnt think of before * Preliminary Review Changes * Review changes for bunnei and subv
2018-06-21Kernel/Arbiters: Initialize arb_wait_address in thread struct.Michael Scire3-1/+7
2018-06-21Kernel/Arbiters: Clear WaitAddress in SignalToAddressMichael Scire1-0/+1
2018-06-21Kernel/Arbiters: Mostly implement SignalToAddressMichael Scire5-11/+111
2018-06-21Kernel/Arbiters: Implement WaitForAddressMichael Scire5-6/+71
2018-06-21Service/Audio: update audren:u servicemailwl2-49/+60
2018-06-21Kernel/Arbiters: Add stubs for 4.x SignalToAddress/WaitForAddres SVCs.Michael Scire7-9/+147
2018-06-20Build: Fixed some MSVC warnings in various parts of the code.Subv12-22/+24
2018-06-19Implement GetAvailableLanguageCodes2 (#575)greggameplayer1-4/+1
* Implement GetAvailableLanguageCodes2 * Revert "Implement GetAvailableLanguageCodes2" This reverts commit caadd9eea3497ae2a13382aecb8ca29e1c02c5af. * Implement GetAvailableLanguageCodes2 * Implement GetAvailableLanguageCodes2
2018-06-19GPU: Perform negation after absolute value in the float shader instructions.Subv1-7/+14
2018-06-19GPU: Don't mark uniform buffers and registers as used for instructions which don't have them.Subv2-14/+18
Like the MOV32I and FMUL32I instructions. This fixes a potential crash when using these instructions.
2018-06-19Services/FS: Return the correct error code when trying to mount a nonexistent savedata.Subv2-2/+12
2018-06-18svc: Add a stub for UserExceptionContextAddr.Jules Blok1-0/+5
2018-06-18gl_rasterizer: Get loose on independent blending.Jules Blok1-1/+1
2018-06-18gl_rasterizer: Implement texture format ASTC_2D_4X4.bunnei6-1/+1709
2018-06-18gl_rasterizer_cache: Loosen things up a bit.bunnei1-26/+8
2018-06-17gl_shader_decompiler: Implement LOP instructions.bunnei2-6/+42
2018-06-17gl_shader_decompiler: Refactor LOP32I instruction a bit in support of LOP.bunnei2-57/+42
2018-06-16gl_shader_decompiler: Implement integer size conversions for I2I/I2F/F2I.bunnei2-14/+43
2018-06-16gl_shader_gen: Set position.w to 1.bunnei1-0/+4
2018-06-16gl_shader_decompiler: Implement LOP32I LogicOperation PassB.bunnei1-6/+12
2018-06-14Bug fixes, testing, and review changesZach Hilman2-7/+20
2018-06-14Add 'Load Folder' menu optionZach Hilman3-0/+17
2018-06-14Add support for main files in file pickerZach Hilman1-0/+2
2018-06-14Recognize main files in game listZach Hilman1-2/+17
2018-06-14Narrow down filter of layout configsZach Hilman2-10/+5
2018-06-13Move loop condition to free functionZach Hilman1-4/+9
2018-06-13Avoid initializing single-joycon layouts with handheld controllerZach Hilman2-1/+5
2018-06-13Qt: Removed the Registers widget.Subv6-292/+0
It was crashing and nobody actually uses this.
2018-06-12GPU: Implemented the iadd32i shader instruction.Subv2-2/+31
2018-06-12GPU: Partially implemented the Maxwell DMA engine.Subv7-1/+237
Only tiled->linear and linear->tiled copies that aren't offsetted are supported for now. Queries are not supported. Swizzled copies are not supported.
2018-06-12gl_shader_decompiler: Implement saturate for float instructions.bunnei2-39/+32
2018-06-12hid: Update all layouts and only show handheld as connected, fixes libnx input for P1_AUTOshinyquagsire232-2/+3
2018-06-10GPU: Convert the gl_InstanceId and gl_VertexID variables to floats when reading from them.Subv1-1/+1
This corrects the invalid position values in some games when doing attribute-less rendering.
2018-06-10Rasterizer: Use UBOs instead of SSBOs for uploading const buffers.Subv4-18/+39
This should help a bit with GPU performance once we're GPU-bound.
2018-06-09GPU: Implement the iset family of shader instructions.Subv2-2/+46
2018-06-09GPU: Added decodings for the ISET family of instructions.Subv1-0/+7
2018-06-09gl_shader_decompiler: Implement SHR instruction.bunnei2-0/+17
2018-06-09GPU: Stub the SSY shader instruction.Subv2-0/+7
This instruction tells the GPU where the flow reconverges in a non-uniform control flow scenario, we can ignore this when generating GLSL code.
2018-06-09gl_shader_decompiler: Implement IADD instruction.bunnei2-11/+37
2018-06-09gl_shader_decompiler: Add missing asserts for saturate_a instructions.bunnei2-8/+18
2018-06-09GPU: Synchronize the blend state on every draw call.Subv2-16/+20
Only independent blending on render target 0 is implemented for now. This fixes the elongated squids in Splatoon 2's boot screen.
2018-06-09GPU: Added registers for normal and independent blending.Subv2-31/+27
2018-06-08GLCache: Align compressed texture sizes to their compression ratio, and then align that compressed size to the block height for tiled textures.Subv1-2/+7
This fixes issues with retrieving non-block-aligned tiled compressed textures from the cache.
2018-06-08Rasterizer: Flush the written region when writing shader uniform data before copying it to the uniform buffers.Subv1-0/+3
This fixes the flip_viewport uniform having invalid values when drawing.
2018-06-07GLRenderer: Write the shader stage configuration UBO data *before* copying it to the GPU.Subv1-3/+4
This should fix the bug with the vs_config UBO being uninitialized during shader execution.
2018-06-07Common/string_util: add StringFromBuffer functionmailwl3-22/+15
convert input buffer (std::vector<u8>) to string, stripping zero chars
2018-06-07gl_shader_decompiler: Implement BFE_IMM instruction.bunnei2-7/+44
2018-06-07GLCache: Use the full uncompressed size when blitting from one texture to another.Subv1-3/+6
This avoids the problem of only copying a tiny piece of the textures when they are compressed.
2018-06-07GLCache: Simplify the logic to copy from one texture to another in BlitTextures.Subv1-53/+3
We now use glCopyImageSubData, this should avoid errors with trying to attach a compressed texture as a framebuffer's color attachment and then blitting to it. Maybe in the future we can change this to glCopyTextureSubImage which only requires GL_ARB_direct_state_access.
2018-06-07gl_shader_decompiler: F2F: Implement rounding modes.bunnei2-10/+35
2018-06-07gl_shader_decompiler: Remove some attribute stuff that has nothing to do with TEX/TEXS.bunnei1-8/+4
2018-06-07shader_bytecode: Add instruction decodings for BFE, IMNMX, and XMAD.bunnei1-0/+20
2018-06-07gl_shader_decompiler: Implement ISETP_IMM instruction.bunnei1-8/+9
2018-06-07GPU: Support changing the texture swizzles for Maxwell textures.Subv3-0/+45
2018-06-07GLState: Support changing the GL_TEXTURE_SWIZZLE parameter of each texture unit.Subv3-0/+20
2018-06-07gl_shader_decompiler: Implement LD_C instruction.bunnei2-0/+43
2018-06-07gl_shader_gen: Add uniform handling for indirect const buffer access.bunnei3-4/+40
2018-06-06gl_shader_decompiler: Refactor uniform handling to allow different decodings.bunnei2-26/+29
2018-06-06GPU: Implement sampling multiple textures in the generated glsl shaders.Subv9-69/+172
All tested games that use a single texture show no regression. Only Texture2D textures are supported right now, each shader gets its own "tex_fs/vs/gs" sampler array to maintain independent textures between shader stages, the textures themselves are reused if possible.
2018-06-06Stub IUser::AttachAvailabilityChangeEventmailwl1-5/+23
2018-06-06nvdrv/devices/nvidia_ctrl_gpu : add IoctlCommands with their params (#524)greggameplayer2-0/+53
* add IoctlCommands with their params in nvidia_ctrl_gpu.h * add function related to the changes done previously * fix clang-format * delete trailing whitespace * correct mistake
2018-06-06Remove unused header filesmailwl1-2/+0
2018-06-06GDB Stub Improvements (#508)Hedges4-27/+194
* GDB Stub should work now. * Applied clang-format. * Replaced htonll with swap64. * Tidy up.
2018-06-06gl_shader_decompiler: Fix un/signed mismatch with SHL.bunnei1-1/+1
2018-06-06maxwell_to_gl: Implement WrapMode Mirror.bunnei1-0/+2
2018-06-06nifm: Stub out IRequest::SetConnectionConfirmationOption.bunnei1-1/+10
2018-06-06am: Stub out IApplicationFunctions::GetPseudoDeviceId.bunnei2-1/+13
2018-06-06GPU: Allow the usage of RGBA16_FLOAT in the texture copy engine.Subv1-0/+2
2018-06-06GPU: Implemented the R11FG11FB10F texture and rendertarget formats.Subv4-11/+30
2018-06-06GPU: Fixed the compression factor for RGBA16F textures.Subv1-1/+1
They're not compressed.
2018-06-06GPU: Allow the usage of RGBA32_FLOAT in the texture copy engine.Subv2-0/+3
2018-06-05Small fixesmailwl2-6/+8
2018-06-05Service/MM: add service and stub some functionsmailwl6-0/+85
2018-06-05GPU: Corrected the branch targets for the shader bra instruction.Subv1-4/+5
2018-06-05GPU: Implemented the F2I_R shader instruction.Subv2-7/+64
2018-06-05gl_shader_decompiler: Fix typo with ISCADD instruction.bunnei1-1/+1
2018-06-05gl_shader_decompiler: Implement SHL instruction.bunnei2-14/+47
2018-06-05gl_shader_decompiler: Implement PredCondition::NotEqual.bunnei1-3/+3
2018-06-05GPU: Implement the ISCADD shader instructions.Subv2-0/+40
2018-06-05GPU: Added decodings for the ISCADD instructions.Subv1-0/+7
2018-06-05GPU: Implement predicated exit instructions in the shader programs.Subv1-4/+6
2018-06-05GPU: Take into account predicated exits when performing shader control flow analysis.Subv1-1/+10
2018-06-04GPU: Use the bf bit in FSET to determine whether to write 0xFFFFFFFF or 1.0f.Subv2-2/+7
2018-06-04GPU: Corrected the I2F_R implementation.Subv1-2/+12
2018-06-04GPU: Calculate the correct viewport dimensions based on the scale and translate registers.Subv2-14/+30
This is how nouveau calculates the viewport width and height. For some reason some games set 0xFFFF in the VIEWPORT_HORIZ and VIEWPORT_VERT registers, maybe those are a misnomer and actually refer to something else?
2018-06-04Nvdrv/devices/nvhost_gpu : Add some IoctlCommands with their params (#511)greggameplayer1-0/+47
* Add some IoctlCommand with their params to nvhost_gpu * fix clang-format * delete trailing whitespace * fix some clang-format * delete one other trailing whitespace * last clang-format fix
2018-06-04GPU: Implemented the LOP32I instruction.Subv2-1/+58
2018-06-04GLCache: Corrected a mismatch between storing compressed sizes and verifying the uncompressed alignment in GetSurface.Subv1-1/+2
2018-06-04sdl: add check for GL extension supportBreadFish642-0/+26
2018-06-04qt: add check for GL extension supportBreadFish642-0/+27
2018-06-04GPU: Use explicit types when retrieving the uniform values for fsetp/fset and isetp instead of the type of an invalid output register.Subv1-9/+18
2018-06-04GPU: Implemented the ISETP_R and ISETP_C shader instructions.Subv2-0/+48
2018-06-04Correct function resultsmailwl1-4/+16
2018-06-04Service/nfp:user : stub some functions.mailwl1-6/+70
Used by Zelda: BoTW
2018-06-04am: Implement ILibraryAppletAccessor::PopOutData.bunnei1-1/+11
2018-06-04am: ISelfController:LaunchableEvent should be sticky.bunnei1-1/+1
2018-06-04am: Stub out ILibraryAppletAccessor Start and GetResult methods.bunnei1-2/+16
2018-06-04GPU: Partially implemented the shader BRA instruction.Subv2-1/+43
2018-06-04GPU: Added decoding for the BRA instruction.Subv1-0/+2
2018-06-04am: Implement ILibraryAppletAccessor::PushInData.bunnei1-43/+55
2018-06-04am: Implement IStorageAccessor::Write.bunnei1-1/+17
2018-06-04am: Cleanup IStorageAccessor::Read.bunnei1-5/+3
2018-06-04am: Implement ILibraryAppletCreator::CreateStorage.bunnei2-21/+34
2018-06-04GPU: Partial implementation of long GPU queries.Subv1-9/+24
Long queries write a 128-bit result value to memory, which consists of a 64 bit query value and a 64 bit timestamp. In this implementation, only select=Zero of the Crop unit is implemented, this writes the query sequence as a 64 bit value, and a 0u64 value for the timestamp, since we emulate an infinitely fast GPU. This specific type was hwtested, but more rigorous tests should be performed in the future for the other types.
2018-06-03gl_shader_decompiler: Implement TEXS component mask.bunnei2-9/+26
2018-06-03gl_shader_decompiler: Implement RRO as a register move.bunnei2-9/+18
2018-06-02Kernel/Threads: A thread waking up by timeout from a WaitProcessWideKey may already have an assigned lock owner.Subv1-2/+5
This situation may happen like so: Thread 1 with low priority calls WaitProcessWideKey with timeout. Thread 2 with high priority calls WaitProcessWideKey without timeout. Thread 3 calls SignalProcessWideKey - Thread 2 acquires the lock and awakens. - Thread 1 can't acquire the lock and is put to sleep with the lock owner being Thread 2. Thread 1's timeout expires, with the lock owner still being set to Thread 2.
2018-06-02GPU: Implemented the DXN1 (BC4) texture format.Subv3-3/+16
2018-06-01Service/time: implement posix time to calendar conversionmailwl2-14/+72
2018-06-01gl_shader_decompiler: Implement TEX instruction.bunnei2-1/+36
2018-06-01gl_shader_decompiler: Support multi-destination for TEXS.bunnei2-2/+23
2018-05-31gl_rasterizer_cache: Assert that component type is UNorm or format is RGBA16F.bunnei1-1/+2
2018-05-31Kernel/Thread: Corrected a typo that caused the affinity mask to never be changed.Subv1-2/+2
2018-05-31Kernel/SVC: Support special core values -2 and -3 in svcSetThreadCoreMask.Subv2-1/+28
Also added some proper error handling.
2018-05-31gl_rasterizer_cache: Implement PixelFormat RGBA16F.bunnei3-6/+22
2018-05-30add IPC CommandType & Some HID FunctionInfo (#487)greggameplayer2-0/+33
* add some CommandType * add some hid FunctionInfo * add some other HID FunctionInfo * delete non useful comments
2018-05-30Kernel/Thread: Corrected a typo in an assert about the processor id.Subv1-1/+1
2018-05-30Shaders: Implemented reading the gl_InstanceID and gl_VertexID variables in the vertex shader.Subv2-1/+11
2018-05-30Services/nvdrv: add '/dev/nvhost-nvdec' devicemailwl4-0/+74
2018-05-30gl_shader_decompiler: F2F_R instruction: Implement abs.bunnei1-1/+7
2018-05-30gl_shader_decompiler: Partially implement F2F_R instruction.bunnei2-4/+9
2018-05-30GPU: Implemented the R8 texture format (0x1D)Subv3-5/+18
2018-05-30nvhost_ctrl: Stub out IocCtrlEventRegister.bunnei2-0/+10
2018-05-30nvhost_ctrl: Stub out IocCtrlEventWaitAsyncCommand.bunnei2-5/+9
2018-05-30gl_rasterize_cache: Invert order of tex format RGB565.bunnei1-1/+1
2018-05-29add all the known TextureFormat (#474)greggameplayer1-2/+71
2018-05-28Service/BCAT: add module and servicesmailwl8-0/+120
2018-05-27GPU: Implemented the A1B5G5R5 texture format (0x14)Subv4-5/+21
2018-05-27NvOsGetConfigU32 should return null instead of 0 for default outputDavid Marcec1-1/+1
2018-05-26am: Stub IApplicationFunctions GetDisplayVersion.bunnei2-1/+10
2018-05-26gl_shader_decompiler: Implement GetPredicateComparison GreaterEqual.bunnei1-4/+3
2018-05-26shader_bytecode: Implement other variants of FMNMX.bunnei2-4/+10
2018-05-26Add & correct miscellaneous things (#470)greggameplayer4-4/+55
* add some InfoType * correct OpenApplicationProxy cmd number * add IDisplayController functions * fix clang-format * add more system languages
2018-05-26GetAudioRendererWorkBufferSize impl (#465)David2-2/+88
* GetAudioRendererWorkBufferSize impl Impl of GetAudioRendererWorkBufferSize based on RE, if this can be cleaned up, please contribute! * Naming conventions * Removed unneeded placeholder * lioncache changes * fixed const * switched to Common::AlignUp
2018-05-25Shader: Implemented compound predicates in fset.Subv1-28/+12
You can specify a predicate in the fset instruction: Result = ((Value1 Comp Value2) OP P0) ? 1.0 : 0.0;
2018-05-25Stubbed NVGPU_GPU_IOCTL_ZBC_SET_TABLE (#463)David2-0/+22
We have no clue on what this actually does yet so stubbing it since it's just input only should be fine for now
2018-05-25GPU: Allow command lists to rebind a channel to another engine in the middle of the command list.Subv1-1/+0
2018-05-25Shader: Implemented compound predicates in fsetp.Subv1-19/+55
You can specify three predicates in an fsetp instruction: P1 = (Value1 Comp Value2) OP P0; P2 = !(Value1 Comp Value2) OP P0;
2018-05-24Stub NVGPU_IOCTL_CHANNEL_SET_TIMEOUTmailwl2-0/+16
Used in Nintendo Labo ToyCon 1&2
2018-05-24yuzu_cmd: Fix project for latest msvc.bunnei1-14/+12
2018-05-24Fix deadlocks caused from HID having too many layoutsDavid Marcec1-1/+1
Games such as SMO deadlock if we have more than 2 layouts
2018-05-23Add & correct some error modulesgreggameplayer1-2/+8
2018-05-23change some functionsgreggameplayer1-6/+6
according to the changes made previously
2018-05-23correct placement and add size checkgreggameplayer1-21/+25
2018-05-23Add ioctl commands with their params and size checkgreggameplayer1-2/+86
2018-05-22Implemented NVHOST_IOCTL_CHANNEL_GET_WAITBASE (#440)David2-1/+20
* Implemented NVHOST_IOCTL_CHANNEL_GET_WAITBASE struct + 4 seems to be hard coded at 0 and struct + 0 seems to be ignored? * IocGetWaitbase -> IocChannelGetWaitbaseCommand * Added super late fixes
2018-05-21Correct audio command numbers & add or rename some functions (#455)greggameplayer5-34/+34
* Add unknown function at the number command 2 * correct audout:u commands numbers * correct audrec:u cmd number & add Unknown function * correct IAudioDevice command numbers * correct codecctl cmd numbers & rename the 8 function * correct place of unknown function & fix clang-format
2018-05-21Shaders: Implemented the FMNMX shader instruction.Subv2-6/+26
2018-05-20Mutex: Do not assert when the mutex waiting threads list isn't empty on mutex release.Subv1-1/+0
A thread may own multiple mutexes at the same time, and only release one of them while other threads are waiting for the other mutexes.
2018-05-20GPU: Implemented the nvmap Free ioctl.Subv2-1/+48
It releases a reference to an nvmap object
2018-05-20GPU: Implemented nvhost-as-gpu's UnmapBuffer ioctl.Subv4-0/+70
It removes a mapping previously created with the MapBufferEx ioctl.
2018-05-20Add and correct some Error Modules (#444)greggameplayer1-6/+40
* Add and correct some Error Modules
2018-05-19Kernel/SVC: Signal the highest priority threads first in svcSignalProcessWideKey.Subv1-51/+68
2018-05-19Kernel/Threads: Reschedule the proper core when operating on that core's threads.Subv1-2/+6
2018-05-19SVC: Removed unused WaitSynchronization1 functionSubv1-30/+0
2018-05-19Qt/WaitTree: Display the callstack for each thread in the wait tree widget.Subv2-0/+37
2018-05-19ShadersDecompiler: Added decoding for the PSETP instruction.Subv1-0/+3
2018-05-19GLRenderer: Remove unused hw_vao_enabled_attributes variable.Subv2-4/+0
2018-05-19GLRenderer: Remove unused vertex buffer and increase the size of the stream buffer to 128 MB.Subv2-9/+3
The stream buffer is where all the vertex data is copied, some games require this to be much bigger than the 4 MB we used to have.
2018-05-19GLRenderer: Log the shader source code when program linking fails.Subv1-0/+27
2018-05-18rename fatal:u functions & add ThrowFatalgreggameplayer1-2/+3
2018-05-18Properly update fatal.h void namegreggameplayer1-2/+2
2018-05-18Properly rename fatal module functionsgreggameplayer1-2/+2
2018-05-17Added RequestWithContext & ControlWithContextDavid Marcec3-1/+7
2018-05-13Updated nfp with more service namesHexagon121-24/+24
2018-05-11More accurate GetTPCMasks implDavid Marcec2-4/+8
2018-05-11core: Add several missing docstrings.bunnei1-0/+8
2018-05-11thread: Rename mask to affinity_masks.bunnei4-5/+6
2018-05-11core: Run all CPU cores separately, even in single-thread mode.bunnei2-13/+23
2018-05-11thread: Support core change on ResumeFromWait and improve ChangeCore.bunnei1-37/+68
2018-05-11scheduler: Protect scheduling functions with a global mutex.bunnei2-0/+18
2018-05-11wait_tree: Add ideal core and affinity mask.bunnei1-0/+2
2018-05-11thread: Initialize ideal_core and mask members.bunnei1-0/+2
2018-05-11threading: Reschedule only on cores that are necessary.bunnei4-3/+10
2018-05-11svc: Implement GetThreadCoreMask and SetThreadCoreMask.bunnei1-7/+22
2018-05-11thread: Implement ChangeCore function.bunnei2-1/+58
2018-05-11svc: SignalProcessWideKey should apply to all cores.bunnei1-43/+50
2018-05-11svc: Implement GetCurrentProcessorNumber.bunnei1-2/+2
2018-05-11wait_tree: Show all threads on all schedulers.bunnei1-6/+14
2018-05-11core: Add a configuration setting for use_multi_core.bunnei10-17/+56
2018-05-11core: Support session close with multicore.bunnei4-16/+47
2018-05-11core: Implement multicore support.bunnei13-78/+113
2018-05-11core: Create a thread for each CPU core, keep in lock-step with a barrier.bunnei4-18/+94
2018-05-11core: Move common CPU core things to its own class.bunnei5-58/+135
2018-05-07Stubs for QLaunch (#428)Hexagon124-5/+221
* Stubs for QLaunch * Wiped unrelated stuff * Addressed comment * Dropped GetPopFromGeneralChannelEvent
2018-05-07hid: Tweaks, Analog Sticks (#435)Max Thomas3-68/+224
* hid: Update mouse/keyboard state * hid: Working analog sticks * hid: Nits * hid: Nits * hid: Update mystery sections * hid: Tweaks
2018-05-03memory_hook: Default virtual destructor in the cpp fileLioncash3-1/+13
Prevents creating multiple copies of the vtable in every translation unit that uses the class. Also silences a -Wweak-vtables warning
2018-05-03core_timing: Don't include the log header in core timing's headerLioncash2-48/+55
Avoids propagating logging macros and facilities to files that may not need them. This also allows hiding an internal constant.
2018-05-02general: Make formatting of logged hex values more straightforwardLioncash29-104/+105
This makes the formatting expectations more obvious (e.g. any zero padding specified is padding that's entirely dedicated to the value being printed, not any pretty-printing that also gets tacked on).
2018-05-02ipc: Add support for PopIpcInterface() method.bunnei4-0/+23
- This can be used for domain objects as inputs to service functions.
2018-05-02vector_math: Ensure members are always initializedLioncash1-9/+9
Ensures that values are always in a well-defined state.
2018-05-01GetSharedFontInOrderOfPriority (#381)David4-24/+54
* GetSharedFontInOrderOfPriority * Update pl_u.cpp * Ability to use ReadBuffer and WriteBuffer with different buffer indexes, fixed up GetSharedFontInOrderOfPriority * switched to NGLOG * Update pl_u.cpp * Update pl_u.cpp * language_code is actually language code and not index * u32->u64 * final cleanups
2018-05-01GPU: Don't write to invalid memory locations when handling ioctls that don't have an output.Subv2-5/+0
2018-04-30core_timing: Namespace all functions and constants in core_timing's headerLioncash9-14/+18
All of these variables and functions are related to timings and should be within the namespace.
2018-04-30string_util: Remove StringFromFormat() and related functionsLioncash8-99/+19
Given we utilize fmt, we don't need to provide our own functions for formatting anymore
2018-04-30file_util: Make move constructor/assignment operator and related functions noexceptLioncash2-6/+6
Without this, it's possible to get compilation failures in the (rare) scenario where a container is used to store a bunch of live IOFile instances, as they may be using std::move_if_noexcept under the hood. Given these definitely don't throw exceptions this is also not incorrect to add either.
2018-04-30file_util: Add static assertions to ReadBytes() and WriteBytes()Lioncash1-2/+6
Ensure that the actual types being passed in are trivially copyable. The internal call to ReadArray() and WriteArray() will always succeed, since they're passed a pointer to char* which is always trivially copyable.
2018-04-29maxwell_3d: Reset vertex counts after drawing.bunnei1-0/+10
2018-04-29gl_shader_decompiler: Implement MOV_R.bunnei1-1/+2
2018-04-29maxwell_to_gl: Implement type SignedNorm, Size_8_8_8_8.bunnei1-0/+12
2018-04-29shader_bytecode: Add decoding for FMNMX instruction.bunnei1-0/+2
2018-04-29Shaders: Implemented predicate condition 3 (LessEqual) in the fset and fsetp instructions.Subv1-0/+7
2018-04-29gl_shader_decompiler: Implement MOV_C.bunnei1-0/+5
2018-04-29am: Fix GetDesiredLanguage implementation.bunnei1-2/+4
2018-04-29set: Fix GetAvailableLanguageCodes implementation.bunnei2-6/+45
2018-04-29fermi_2d: Fix surface copy block height.bunnei2-2/+7
2018-04-29gl_shader_decompiler: Partially implement I2I_R, and I2F_R.bunnei2-8/+34
2018-04-29gl_shader_decompiler: More cleanups, etc. with how we handle register types.bunnei1-44/+120
2018-04-29GLSLRegister: Simplify register declarations, etc.bunnei1-63/+31
2018-04-29shader_bytecode: Add decodings for i2i instructions.bunnei1-3/+20
2018-04-29gl_shader_decompiler: Implement MOV32_IMM instruction.bunnei2-2/+7
2018-04-28file_util: Remove compiler version checks around is_trivially_copyable()Lioncash1-8/+0
The minimum clang/GCC versions we support already support this. We can also remove is_standard_layout(), as fread and fwrite only require the type to be trivially copyable.
2018-04-27log: Remove old logging macros and functionsLioncash2-54/+1
Now that the old macros are no longer used, we can remove all functionality related to them.
2018-04-27renderer_opengl: Replace usages of LOG_GENERIC with fmt-capable equivalentsLioncash1-6/+7
2018-04-27core: Replace usages of LOG_GENERIC with new fmt-capable equivalentsLioncash3-6/+4
2018-04-27gl_shader_decompiler: Add GLSLRegisterManager class to track register state.bunnei1-154/+262
2018-04-27general: Convert assertion macros over to be fmt-compatibleLioncash17-39/+39
2018-04-27Switched to NGLOG_WARNINGDavid Marcec4-5/+5
2018-04-27common: Move logging macros over to new fmt-capable macros where applicableLioncash4-67/+67
2018-04-27frontends: Move logging macros over to new fmt-capable onesLioncash5-27/+26
2018-04-27input_common: Move old logging macros over to fmt-capable onesLioncash1-3/+3
2018-04-26Added PREPO to logging backend, Removed comments from SaveReportWithUserDavid Marcec3-13/+3
2018-04-26core: Replace remaining old non-generic logger usages with fmt-capable equivalentsLioncash6-28/+28
LOG_GENERIC usages will be amended in a follow-up to keep API changes separate from interface changes, as it will require removing a parameter from the relevant function in the VMManager class.
2018-04-26common: Remove chunk_file.h and linear_disk_cache.hLioncash3-792/+0
These are unused (and given chunk_file references Dolphin's >SVN< I doubt they were going to be used).
2018-04-26gl_shader_decompiler: Boilerplate for handling integer instructions.bunnei2-6/+111
2018-04-26gl_shader_decompiler: Move color output to EXIT instruction.bunnei1-6/+12
2018-04-26core/gdbstub: Move logging macros to new fmt-compatible onesLioncash1-38/+37
2018-04-26core/hw: Move logging macros over to fmt-capable onesLioncash2-8/+10
2018-04-26kernel/shared_memory: Remove unnecessary semicolon at end of ConvertPermissions()Lioncash1-1/+1
Functions don't need to be terminated by semicolons.
2018-04-26kernel: Migrate logging macros to fmt-compatible onesLioncash11-106/+109
2018-04-25GPU: Partially implemented the Fermi2D surface copy operation.Subv2-0/+59
The hardware allows for some rather complicated operations to be performed on the data during the copy, this is not implemented. Only same-format same-size raw copies are implemented for now.
2018-04-25Shaders: Added bit decodings for the I2I instruction.Subv1-0/+6
2018-04-25Shaders: Implemented the FSET instruction.Subv1-0/+53
This instruction is similar to the FSETP instruction, but it doesn't set a predicate, it sets the destination register to 1.0 if the condition holds, and 0 otherwise.
2018-04-25Memory: Added a missing shortcut for Memory::CopyBlock for the current process.Subv1-0/+4
2018-04-25GPU: Make the Textures::CopySwizzledData function accessible from the outside of the file.Subv2-3/+6
2018-04-25GPU: Added a function to retrieve the bytes per pixel of the render target formats.Subv2-0/+15
2018-04-25GPU: Added surface copy registers to Fermi2DSubv1-1/+57
2018-04-25GPU: Added boilerplate code for the Fermi2D engineSubv3-3/+34
2018-04-25GPU: Reduce the number of registers of Maxwell3D to 0xE00.Subv2-5/+5
The rest are just macro shim registers.
2018-04-25GPU: Move the Maxwell3D macro uploading code to the inside of the Maxwell3D processor.Subv4-40/+23
It doesn't belong in the PFIFO handler.
2018-04-25GPU: Corrected the upper bound of the PFIFO method ids in the command processor.Subv1-1/+1
2018-04-25file-sys: convert a StringFromFormat call into fmt::format in GetFullPath()Lioncash1-4/+1
Lessens the amount to read and gets rid of the PRIX64 macro, allowing us to use a single string for the whole path, making it easier to read.
2018-04-25file-sys: Move logging macros over to the new fmt-capable onesLioncash8-64/+58
2018-04-25core/memory: Amend address widths in assertsLioncash1-2/+2
Addresses are 64-bit, these formatting specifiers are simply holdovers from citra. Adjust them to be the correct width.
2018-04-25core/memory: Move logging macros over to new fmt-capable onesLioncash1-22/+24
While we're at it, correct addresses to print all 64 bits where applicable, which were holdovers from citra.
2018-04-25video-core: Move logging macros over to new fmt-capable onesLioncash5-18/+20
2018-04-25Service/PCTL: convert to module, add services, stubmailwl7-39/+71
PCTL::CreateServiceWithoutInitialize and IParentalControlService::Initialize, required by Kirby Star Allies
2018-04-25Shaders: Added decodings for the FSET instructions.Subv2-9/+30
2018-04-25renderer_opengl: Use correct byte order for framebuffer pixel format ABGR8.bunnei1-2/+1
2018-04-25gl_rasterizer_cache: Use CHAR_BIT for bpp conversions instead of 8.bunnei2-4/+4
2018-04-25gl_rasterizer_cache: Use GPU PAGE_BITS/SIZE, not CPU.bunnei1-5/+5
2018-04-25gl_rasterizer_cache: Use new logger.bunnei1-4/+4
2018-04-25gl_rasterizer_cache: Add a function for finding framebuffer GPU address.bunnei3-0/+31
2018-04-25gl_rasterizer_cache: Handle compressed texture sizes.bunnei2-24/+65
2018-04-25gl_rasterizer_cache: Update to be based on GPU addresses, not CPU addresses.bunnei10-67/+122
2018-04-25loader: Move old logging macros over to new fmt-capable onesLioncash5-26/+25
2018-04-24memory_manager: Add implement CpuToGpuAddress.bunnei2-0/+27
2018-04-24memory_manager: Make GpuToCpuAddress return an optional.bunnei7-28/+37
2018-04-24memory_manager: Use GPUVAdddr, not PAddr, for GPU addresses.bunnei7-60/+57
2018-04-24service: Move logging macros over to new fmt-compatible onesLioncash1-5/+5
2018-04-24vi: Move logging macros over to new fmt-compatible onesLioncash1-26/+27
2018-04-24time: Move logging macros over to new fmt-compatible onesLioncash1-12/+12
2018-04-24ssl: Move logging macros over to new fmt-compatible onesLioncash1-3/+3
2018-04-24spl: Move logging macros over to new fmt-compatible onesLioncash1-1/+1
2018-04-24sockets: Move logging macros over to new fmt-compatible onesLioncash2-7/+8
2018-04-24sm: Move logging macros over to new fmt-compatible onesLioncash2-9/+8
2018-04-24set: Move logging macros over to new fmt-compatible onesLioncash2-2/+2
2018-04-24pctl: Move logging macros over to new fmt-compatible onesLioncash1-1/+1
2018-04-24nvflinger: Move logging macros over to new fmt-compatible onesLioncash2-3/+3
2018-04-24nvdrv: Move logging macros over to new fmt-compatible onesLioncash7-60/+61
2018-04-24ns: Move logging macros over to new fmt-compatible onesLioncash1-6/+6
2018-04-24nifm: Move logging macros over to new fmt-compatible onesLioncash1-11/+11
2018-04-24nfp: Move logging macros over to new fmt-compatible onesLioncash1-1/+1
2018-04-24lm: Move logging macros over to new fmt-compatible onesLioncash1-6/+6
2018-04-24hid: Move logging macros over to new fmt-compatible onesLioncash1-25/+25
2018-04-24friend: Move logging macros over to new fmt-compatible onesLioncash1-1/+1
2018-04-24filesystem: Move logging macros over to new fmt-compatible onesLioncash2-30/+29
2018-04-24renderer_opengl: Silence a -Wdangling-else warning in DrawScreenTriangles()Lioncash1-1/+2
2018-04-24fatal: Move logging macros over to new fmt-compatible onesLioncash1-2/+2
2018-04-24audio: Move logging macros over to new fmt-compatible onesLioncash2-21/+21
2018-04-24apm: Move logging macros over to new fmt-compatible onesLioncash1-3/+3
2018-04-24aoc: Move logging macros over to new fmt-compatible onesLioncash1-2/+2
2018-04-24am: Move logging macros over to new fmt-compatible onesLioncash3-50/+50
2018-04-24acc: Move logging macros over to new fmt-compatible onesLioncash1-10/+10
2018-04-24Service/FS: implement IFileSystem::RenameFilemailwl6-8/+36
2018-04-24GPU: Added asserts to our code for handling the QUERY_GET GPU command.Subv2-2/+53
This is based on research from nouveau. Many things are currently unknown and will require hwtests in the future. This commit also stubs QueryMode::Write2 to do the same as Write. Nouveau code treats them interchangeably, it is currently unknown what the difference is.
2018-04-23GPU: Support multiple enabled vertex arrays.Subv3-43/+89
The vertex arrays will be copied to the stream buffer one after the other, and the attributes will be set using the ARB_vertex_attrib_binding extension. yuzu now thus requires OpenGL 4.3 or the ARB_vertex_attrib_binding extension.
2018-04-23Kernel: Implemented mutex priority inheritance.Subv4-10/+94
Verified with a hwtest and implemented based on reverse engineering. Thread A's priority will get bumped to the highest priority among all the threads that are waiting for a mutex that A holds. Once A releases the mutex and ownership is transferred to B, A's priority will return to normal and B's priority will be bumped.
2018-04-23NvDrv/nvhost-as-gpu: Ensure that the object passed to MapBufferEx has already been allocated.Subv1-0/+10
Also added a consistency check and a comment for the case when the object id is different than its handle. The real nvservices doesn't make a distinction between ids and handles, each object gets an unique handle which doubles as its id.
2018-04-23Nvdrv/nvhost-as-gpu: Implemented the ioctl REMAP command.Subv2-0/+47
It takes a previously-reserved (AllocateSpace) GPU memory address and maps it to the address of the nvmap object passed to Remap.
2018-04-23Nvdrv: Assert when receiving an unimplemented ioctl in the nv* handlers.Subv5-5/+5
2018-04-23GPU: Make the GPU virtual memory manager use 16 page bits and 10 page table bits.Subv2-34/+25
Also removed some dead code and added memory map consistency asserts.
2018-04-23GPU: Implement the RGB10_A2 RenderTarget format, it will use the same format as the A2BGR10 texture format.Subv2-0/+4
2018-04-23GetIUserInterface->CreateUserInterface, Added todos and stub logs. Playreport->PlayReport.David Marcec10-25/+64
2018-04-22lioncash proposed changesDavid1-2/+2
2018-04-22Implemented GetIUserInterface properly, Playreport and SSL::SetInterfaceVersion. Fixed ipc issues with IAudioDevice(wrong ids)David Marcec11-11/+109
2018-04-22GPU: Implement the A2BGR10 texture format.Subv4-6/+18
2018-04-21SDL2: Implement fullscreen. (Original PR: citra-emu/citra#3607)adityaruplaha3-4/+40
2018-04-21gl_shader_decompiler: Skip RRO instruction.bunnei1-0/+4
2018-04-21gl_shader_decompiler: Cleanup error logging.bunnei1-14/+6
2018-04-21shader_bytecode: Add several more instruction decodings.bunnei1-5/+52
2018-04-21shader_bytecode: Decode instructions based on bit strings.bunnei2-205/+201
2018-04-21ShaderGen: Implemented the KIL instruction, which is equivalent to 'discard'.Subv1-1/+7
2018-04-21ShaderGen: Implemented predicated instruction execution.Subv2-1/+40
Each predicated instruction will be wrapped in an `if (predicate) { instruction_body; }` in the GLSL, where `predicate` is one of the predicate boolean variables previously set by fsetp.
2018-04-21ShaderGen: Implemented the fsetp instruction.Subv2-3/+112
Predicate variables are now added to the generated shader code in the form of 'pX' where X is the predicate id. These predicate variables are initialized to false on shader startup and are set via the fsetp instructions. TODO: * Not all the comparison types are implemented. * Only the single-predicate version is implemented.
2018-04-21Kernel: Use 0x2C as default main thread priority for homebrew and lone NRO/NSOsSubv3-3/+3
2018-04-21Qt: Update the WaitTree widget to show info about the current mutex of each thread.Subv5-90/+55
2018-04-21Kernel: Remove unused ConditionVariable class.Subv6-150/+0
2018-04-21Kernel: Remove old and unused Mutex code.Subv4-209/+3
2018-04-21Kernel: Properly implemented svcWaitProcessWideKey and svcSignalProcessWideKeySubv1-83/+46
They work in tandem with guest code to provide synchronization primitives along with svcArbitrateLock/Unlock
2018-04-21Kernel: Corrected the implementation of svcArbitrateLock and svcArbitrateUnlock.Subv6-22/+126
Switch mutexes are no longer kernel objects, they are managed in userland and only use the kernel to handle the contention case. Mutex addresses store a special flag value (0x40000000) to notify the guest code that there are still some threads waiting for the mutex to be released. This flag is updated when a thread calls ArbitrateUnlock. TODO: * Fix svcWaitProcessWideKey * Fix svcSignalProcessWideKey * Remove the Mutex class.
2018-04-21opengl: Remove unnecessary header inclusionsLioncash4-11/+0
2018-04-21gl_resource_manager: Add missing noexcept specifiers to move constructors and assignment operatorsLioncash1-20/+19
Standard library containers may use std::move_if_noexcept to perform move operations. If a move cannot be performed under these circumstances, then a copy is attempted. Given we only intend for these types to be move-only this can be somewhat problematic. By defining these to be noexcept we prevent cases where copies may be attempted.
2018-04-21gl_rasterizer_cache: Make MatchFlags an enum classLioncash1-4/+9
Prevents implicit conversions and scope pollution.
2018-04-21core: Relocate g_service_manager to the System classLioncash6-38/+66
Converts the service manager from a global into an instance-based variable.
2018-04-21resource_limit: Make ResourceTypes an enum classLioncash3-38/+38
Prevents enum identifiers from leaking into the surrounding scope.
2018-04-20ShaderGen: Register id 255 is special and is hardcoded to return 0 (SR_ZERO).Subv2-0/+5
2018-04-20ShaderGen: Ignore the 'sched' instruction when generating shaders.Subv1-0/+16
The 'sched' instruction has a very convoluted encoding, but fortunately it seems to only appear on a fixed interval (once every 4 instructions).
2018-04-20math_util: Remove the Clamp() functionLioncash5-24/+22
C++17 adds clamp() to the standard library, so we can remove ours in favor of it.
2018-04-20vector_math: Remove AsArray() and Write() functions from Vec[2,3,4]Lioncash1-30/+0
These are all unused and the Write() ones should arguably not even be in the interface. There are better ways to provide this if we ever need it (like iterators).
2018-04-20common: Remove code_block.hLioncash2-86/+0
We use dynarmic, so this is unued. Anything else we need will likely use Xbyak, so this header isn't necessary any more.
2018-04-20common/thread: Remove unnecessary feature checking for thread_localLioncash1-19/+0
Every compiler we require already supports it.
2018-04-20common_funcs: Remove ARRAY_SIZE macroLioncash3-5/+4
C++17 has non-member size() which we can just call where necessary.
2018-04-20common_funcs: Remove check for VS versions that we don't even supportLioncash1-5/+0
We don't support any VS versions that don't already have snprintf in the standard library implementation.
2018-04-20common_types: Convert typedefs to using aliasesLioncash1-12/+12
May as well while we're making changes to this file.
2018-04-20common_types: Remove unnecessary check for whether or not__func__ is definedLioncash1-6/+0
VS has supported this for quite a while.
2018-04-20service: Use nested namespace specifiers where applicableLioncash136-570/+273
Tidies up namespace declarations
2018-04-20vi: Remove redundant initializers in the constructorsLioncash1-9/+5
2018-04-20disk_filesystem: Remove unused total_entries_in_directory member from Disk_DirectoryLioncash1-1/+0
2018-04-20disk_filesystem: Remove redundant initializer in Disk_Directory's constructorLioncash1-1/+1
2018-04-20disk_filesystem: Make constructors explicit where applicableLioncash1-2/+2
2018-04-20renderer_opengl: Add missing header guardsLioncash2-0/+4
2018-04-20glsl_shader_decompiler: Use std::string_view instead of std::string for AddLine()Lioncash1-1/+2
This function doesn't need to take ownership of the string data being given to it, considering all we do is append the characters to the internal string instance. Instead, use a string view to simply reference the string data without any potential heap allocation. Now anything that is a raw const char* won't need to be converted to a std::string before appending.
2018-04-20glsl_shader_decompiler: Add AddNewLine() function to ShaderWriterLioncash1-6/+12
Avoids constructing a std::string just to append a newline character
2018-04-20glsl_shader_decompiler: Add char overload for ShaderWriter's AddLine()Lioncash1-4/+11
Avoids constructing a std::string just to append a character.
2018-04-20glsl_shader_decompiler: Append indentation without constructing a separate std::stringLioncash1-1/+5
The interface of std::string already lets us append N copies of a character to an existing string.
2018-04-19ShaderGen: Implemented the fmul32i shader instruction.Subv2-9/+30
2018-04-19ShaderGen: Fixed a case where the TEXS instruction would use the same registers for the input and the output.Subv1-2/+9
It will now save the coords before writing the outputs in a subscope.
2018-04-19Implement Pull #3528 from citra: use nvidia graphics automatically on laptops with optimus (with AMD support) (#271)N00byKing2-0/+18
* Port 3528: use nvidia graphics automatically on laptops with optimus * Force dedicated AMD Card for switchable Graphics * Ran clang-format
2018-04-19GPU: Add support for the DXT23 and DXT45 compressed texture formats.Subv3-28/+35
2018-04-19nvflinger: Call MicroProfileFlip on NVFlinger::Compose.bunnei1-0/+3
2018-04-19GPU: Implemented the B5G6R5 format.Subv4-8/+28
2018-04-18gl_shader_gen: Support vertical/horizontal viewport flipping. (#347)bunnei4-5/+29
* gl_shader_gen: Support vertical/horizontal viewport flipping. * fixup! gl_shader_gen: Support vertical/horizontal viewport flipping.
2018-04-18GLCache: Added boilerplate code to make supporting configurable texture component types.Subv3-9/+69
For now only the UNORM type is supported.
2018-04-18GLCache: Unify texture and framebuffer formats when converting to OpenGL.Subv2-26/+13
2018-04-18GPU: Texture format 8 and framebuffer format 0xD5 are actually ABGR8.Subv2-10/+10
2018-04-18GPU: Pitch textures are now supported, don't assert when encountering them.Subv1-2/+3
2018-04-18GLCache: Take into account the texture's block height when caching and unswizzling.Subv3-43/+43
2018-04-18GLCache: Added a function to convert cached PixelFormats back to texture formats.Subv1-0/+12
TODO: The way we handle cached formats must change, framebuffer and texture formats are too different to keep them in the same place.
2018-04-18GPU: Allow using a configurable block height when unswizzling textures.Subv4-7/+23
2018-04-18GPU/TIC: Added the pitch and block height fields to the TIC structure.Subv1-1/+16
2018-04-18gl_rasterizer_cache: Add missing LOG statements.bunnei1-0/+3
2018-04-18texture: Add missing formats.bunnei1-1/+3
2018-04-18gpu: Add several framebuffer formats to RenderTargetFormat.bunnei1-0/+3
2018-04-18maxwell3d: Allow Texture2DNoMipmap as Texture2D.bunnei1-1/+2
2018-04-18shader_bytecode: Make ctor's constexpr and explicit.bunnei1-7/+7
2018-04-18renderer_opengl: Implement BlendEquation and BlendFunc.bunnei6-7/+140
2018-04-18bit_field: Remove is_pod check, add is_trivially_copyable_v.bunnei1-6/+1
2018-04-17gl_shader_decompiler: Fix warnings with MarkAsUsed.bunnei1-1/+2
2018-04-17gl_shader_decompiler: Cleanup logging, updating to NGLOG_*.bunnei1-24/+22
2018-04-17gl_shader_decompiler: Implement several MUFU subops and abs_d.bunnei1-7/+21
2018-04-17gl_shader_decompiler: Fix swizzle in GetRegister.bunnei1-1/+1
2018-04-17gl_shader_decompiler: Implement FMUL/FADD/FFMA immediate instructions.bunnei2-12/+53
2018-04-17gl_shader_decompiler: Allow vertex position to be used in fragment shader.bunnei2-16/+18
2018-04-17gl_shader_decompiler: Implement IPA instruction.bunnei1-0/+11
2018-04-17gl_shader_decompiler: Add support for TEXS instruction.bunnei2-12/+43
2018-04-17gl_shader_decompiler: Use fragment output color for GPR 0-3.bunnei1-0/+5
2018-04-17gl_shader_decompiler: Partially implement MUFU.bunnei1-2/+11
2018-04-17Service/VI: stub SetLayerVisibility, fix GetDisplayResolution outputmailwl1-7/+27
both SetLayerVisibility() functions used in Lego games, GetDisplayResolution() fixed according switchbrew.org
2018-04-17file_sys: Use NGLOGshinyquagsire231-5/+5
2018-04-17Various service name fixes - part 2 (rebased) (#322)Hexagon1213-11/+207
* Updated ACC with more service names * Updated SVC with more service names * Updated set with more service names * Updated sockets with more service names * Updated SPL with more service names * Updated time with more service names * Updated vi with more service names
2018-04-17MaxwellToGL: Implemented tex wrap mode 1 (Wrap, GL_REPEAT).Subv1-0/+2
2018-04-17MaxwellToGL: Added a TODO and partial implementation of maxwell wrap mode 4 (Clamp, GL_CLAMP).Subv1-0/+5
This clamp mode was removed from OpenGL as of 3.1, we can emulate it by using GL_CLAMP_TO_BORDER to get the border color of the texture, and then manually sampling the edge to mix them in the fragment shader.
2018-04-17gl_rendering: Use NGLOG* for changed code.bunnei2-10/+11
2018-04-17gl_rasterizer: Implement indexed vertex mode.bunnei5-23/+92
2018-04-16file_sys: tweaksshinyquagsire232-6/+7
2018-04-16file_sys: Add HFS/PFS helper componentshinyquagsire233-0/+213
2018-04-15pl_u: Use empty shared font if none is available.bunnei1-17/+14
- Makes games work in lieu of shared_font.bin.
2018-04-15GPU: Use the same buffer names in the generated GLSL and the buffer uploading code.Subv4-17/+24
2018-04-15GPU: Don't use explicit binding points when uploading the constbuffers to opengl.Subv3-7/+47
The bindpoints will now be dynamically calculated based on the number of buffers used by the previous shader stage.
2018-04-15fsp_srv: Implement DeleteFile.bunnei6-9/+27
- Used by Binding of Isaac.
2018-04-15GPU: Don't use GetPointer when uploading the constbuffer data to the GPU.Subv1-3/+4
2018-04-15GPU: Use the buffer hints from the shader decompiler to upload only the necessary const buffers for each shader stage.Subv3-31/+41
2018-04-15shaders: Expose hints about used const buffers.bunnei5-31/+146
2018-04-15GPU: Upload the entirety of each constbuffer for each shader stage as SSBOs.Subv4-14/+48
We're going to need the shader generator to give us a mapping of the actual used const buffers to properly bind them to the shader.
2018-04-15GPU: Allow configuring ssbos in the opengl state manager.Subv4-0/+30
2018-04-15GPU: Added a function to determine whether a shader stage is enabled or not.Subv3-3/+27
2018-04-15vm_manager: Increase GetTotalMemoryUsage value.bunnei1-1/+1
- Gets Binding of Isaac running.
2018-04-15fsp_srv: Implement IFile::Flush.bunnei1-1/+9
2018-04-15shaders: Add NumTextureSamplers const, remove unused #pragma.bunnei4-4/+5
2018-04-14shaders: Address PR review feedback.bunnei2-7/+9
2018-04-14gl_shader_decompiler: Cleanup log statements.bunnei1-15/+15
2018-04-14shaders: Fix GCC and clang build issues.bunnei3-5/+5
2018-04-14gl_shader_decompiler: Implement negate, abs, etc. and lots of cleanup.bunnei2-40/+96
2018-04-14shader_bytecode: Add FSETP and KIL to GetInfo.bunnei1-0/+3
2018-04-14shader_bytecode: Add SubOp decoding.bunnei1-0/+10
2018-04-14gl_shader_decompiler: Add shader stage hint.bunnei2-5/+12
2018-04-14renderer_opengl: Fix Morton copy byteswap, etc.bunnei2-6/+6
2018-04-14Fix the stuck in fullscreen bug (Original PR: citra-emu/citra#3611)adityaruplaha1-2/+4
2018-04-14gl_shader_manager: Implement SetShaderSamplerBindings.bunnei1-0/+8
2018-04-14gl_rasterizer: Generate shaders and upload uniforms.bunnei2-32/+77
2018-04-14gl_shader_decompiler: Basic impl. for very simple vertex shaders.bunnei2-16/+311
- Tested with Puyo Puyo Tetris and Cave Story+
2018-04-14gl_shader_manager: Cleanup and consolidate uniform handling.bunnei2-26/+24
2018-04-14maxwell_3d: Make memory_manager public.bunnei1-2/+1
2018-04-14maxwell_3d: Fix shader_config decodings.bunnei1-6/+3
2018-04-14gl_rasterizer: Use shader program manager, remove test shader.bunnei2-196/+31
2018-04-14renderer_opengl: Add gl_shader_manager class.bunnei3-0/+209
2018-04-14maxwell_to_gl: Add a few types, etc.bunnei1-0/+10
2018-04-14gl_shader_gen: Add hashable setup/config structs.bunnei2-29/+50
2018-04-14gl_shader_util: Add missing includes.bunnei1-0/+2
2018-04-14common: Port cityhash code from Citra.bunnei5-147/+502
2018-04-14renderer_opengl: Use OGLProgram instead of OGLShader.bunnei6-6/+6
2018-04-14gl_shader_util: Grab latest upstream.bunnei2-149/+74
2018-04-14gl_resource_manager: Grab latest upstream.bunnei1-30/+86
2018-04-14gl_shader_decompiler: Add skeleton code from Citra for shader analysis.bunnei2-44/+142
2018-04-14shader_bytecode: Add initial module for shader decoding.bunnei2-0/+298
2018-04-14bit_field: Make all methods constexpr.bunnei1-5/+5
2018-04-13Fixed normal params in GetDisplayResolutionHexagon121-1/+1
2018-04-13Stubbed out GetPlayerLedPatternHexagon121-1/+7
2018-04-11Service/SSL: update service according switchbrewmailwl2-1/+98
2018-04-11Various fixes and clangHexagon126-115/+108
2018-04-10Decimal changeHexagon121-4/+4
2018-04-10Updated pctl:a with new service names.Hexagon121-4/+101
2018-04-10Updated nvmemp with new service names.Hexagon121-4/+4
2018-04-10Updated nvdrv with more service names.Hexagon121-0/+7
2018-04-10Updated pl:u with more service names.Hexagon121-1/+3
2018-04-10Updated hid with more service names.Hexagon121-0/+50
2018-04-10Updated friend:u with more service names.Hexagon121-1/+2
2018-04-10Updated the unknown nameHexagon121-1/+1
2018-04-10Updated friend:a with more service names.Hexagon121-1/+2
2018-04-10Updated fsp-srv with more service names.Hexagon121-4/+102
2018-04-10Updated CodecCtl with more service names.Hexagon121-3/+3
2018-04-10Updated audren with more service names.Hexagon121-10/+14
2018-04-10Updated audrec with more service names.Hexagon121-7/+9
2018-04-10Updated audout with more service names.Hexagon121-13/+16
2018-04-10Updated audin with more service names.Hexagon121-9/+16
2018-04-10Updated AOC with more service names.Hexagon121-0/+1
2018-04-10Updated AppletOE with more service names.Hexagon121-0/+1
2018-04-10Updated AppletAE with more service names.Hexagon121-0/+1
2018-04-10Updated AM with more service names.Hexagon121-2/+82
2018-04-10Service/ACC: convert to module, add acc:aa, acc:su, acc:u1 servicesmailwl11-127/+342
2018-04-07Prevent crash from uninitialized telemetryJames Rowe1-2/+1
2018-04-07Fix spelling of InitializeJames Rowe2-3/+3
2018-04-07Fix clang format issuesJames Rowe1-1/+1
2018-04-07GPU: Assert when finding a texture with a format type other than UNORM.Subv2-4/+16
2018-04-07GL: Set up the textures used for each draw call.Subv2-2/+39
Each Maxwell shader stage can have an arbitrary number of textures, but we're limited to a certain number in OpenGL. We try to only use the minimum amount of host textures by not keeping a 1:1 relation between guest texture ids and host texture ids, ie, guest texture id 8 can be host texture id 0 if it's the only texture used in the guest shader program. This mapping will have to be passed to the shader decompiler so it can rewrite the texture accesses.
2018-04-07GL: Bind the textures to the shaders used for drawing.Subv1-2/+11
2018-04-07GLCache: Specialize the MortonCopy function for the DXT1 texture format.Subv1-1/+15
It will now use the UnswizzleTexture function instead of the MortonCopyPixels128, which doesn't seem to work for textures.
2018-04-07GLCache: Implemented GetTextureSurface.Subv1-3/+28
2018-04-07GLCache: Support uploading compressed textures to the GPU.Subv1-5/+17
Compressed texture formats like DXT1, DXT2, DXT3, etc will use this to ease the load on the CPU.
2018-04-07GL: Remove remaining references to 3DS-specific pixel formatsSubv1-83/+22
2018-04-07RasterizerCache: Remove 3DS-specific pixel formats.Subv2-71/+32
We're only left with RGB8 and DXT1 for now. More will be added as they are needed.
2018-04-07GL: Create the sampler objects when starting up the GL rasterizer.Subv1-0/+6
2018-04-07GL: Ported the SamplerInfo struct from citra.Subv2-1/+59
2018-04-07GL: Rename PicaTexture to MaxwellTexture.Subv2-2/+2
2018-04-07GL: Added functions to convert Maxwell tex filters and wrap modes to OpenGL.Subv1-0/+23
2018-04-07Textures: Added a helper function to know if a texture is blocklinear or pitch.Subv1-0/+5
2018-04-06core, main.h: Abort on 32Bit ROMs (#309)N00byKing5-1/+17
* core, main.h: Abort on 32Bit ROMs * main.cpp: Fix Grammar
2018-04-06Update fmtlib to fix msvc warningsJames Rowe2-5/+8
Additionally, when updating fmtlib, there was a change in fmtlib broke how the old logging macro was overloaded, so this works around that by just naming the fmtlib macro impl something different
2018-04-04rasterizer_interface.h: Update from citra to yuzuN00byKing1-3/+3
2018-04-04default_ini.h: Update from citra to yuzuN00byKing1-1/+1
2018-04-04gl_rasterizer_cache.cpp: Update from citra to yuzuN00byKing1-1/+1
2018-04-04gl_rasterizer_cache.h: Update from citra to yuzuN00byKing1-3/+3
2018-04-04renderer_opengl.h: Update from citra to yuzuN00byKing1-2/+2
2018-04-03svc: Stub out SetThreadActivity, GetThreadContext.bunnei2-2/+19
2018-04-03audren_u: Stub out GetActiveAudioDeviceName.bunnei1-1/+13
2018-04-03audout_u: Implement GetAudioOutState.bunnei1-1/+8
2018-04-03nifm: GetResult does not return a data field.bunnei1-2/+1
2018-04-03vi: Implement GetDisplayResolution.bunnei2-0/+26
2018-04-03shared_memory: Remove incorrect 3ds-specific check.bunnei1-12/+0
2018-04-03service: Add friend:u interface.bunnei4-0/+41
2018-04-03logging: Change FmtLogMessage to use variadic template instead of FMT_VARIADICDaniel Lim Wee Soong2-5/+11
Due to premature merging of #262 I think the build may be failing right now. Should merge this ASAP to fix it.
2018-04-03deconstructed_rom_directory.cpp: Fix TypoN00byKing1-1/+1
2018-04-02externals: Update fmt to 4d35f94Daniel Lim Wee Soong1-6/+6
Versions prior to this didn't compile on OpenBSD due to unconditional use of the non-standard strtod_l() function. The fmt::MemoryWriter API has been removed in the intervening versions, so replace its use with fmt::memory_buffer and fmt::format_to. The library also no longer provides the fmt::fmt ALIAS, so define it in externals/CMakeLists.txt.
2018-04-02common: fix swap functions on Bitrig and OpenBSDDaniel Lim Wee Soong1-1/+13
swap{16,32,64} are defined as macros on the two, but client code tries to invoke them as Common::swap{16,32,64}, which naturally doesn't work. This hack redefines the macros as inline functions in the Common namespace: the bodies of the functions are the same as the original macros, but relying on OS-specific implementation details like this is of course brittle.
2018-04-01GPU: Use the MacroInterpreter class to execute the GPU macros instead of HLEing them.Subv2-121/+13
2018-04-01GPU: Implemented a gpu macro interpreter.Subv5-0/+431
The Ryujinx macro interpreter and envydis were used as reference. Macros are programs that are uploaded by the games during boot and can later be called by writing to their method id in a GPU command buffer.
2018-04-01hid: Write empty touch screen state.bunnei1-5/+21
2018-04-01hle_ipc, fsp_srv: Cleanup logging.bunnei2-3/+3
2018-03-31hid: Stub out GetSupportedNpadStyleSet.bunnei1-0/+8
2018-03-31hle_ipc: Do not ensure write buffer size.bunnei1-2/+5
2018-03-31fsp_srv: Implement GetSize and SetSize.bunnei2-4/+24
2018-03-31memory: Fix stack region.bunnei6-10/+12
2018-03-30Port citra-emu/citra#3610 to yuzuN00byKing2-3/+7
2018-03-30Remove whitespacesN00byKing1-1/+1
2018-03-30Add Dark theme, Icon themingN00byKing7-0/+75
configure_general.ui: Add UI Option for Themes config.cpp: Save Theme Settings
2018-03-30audren_u: Stub QueryAudioDeviceSystemEvent and GetActiveChannelCount.bunnei1-8/+36
2018-03-30svc: Stub GetThreadCoreMask.bunnei2-3/+26
2018-03-30service: Add NFP module interface.bunnei8-0/+101
service: Initialize NFP service. Log: Add NFP service as a log subtype.
2018-03-29result: Check against self-assignment in ResultVal's copy assignment operatorLioncash1-0/+3
Avoids doing work that doesn't need to be done.
2018-03-27main.h: Add pragma once, remove ifndefN00byKing1-5/+2
2018-03-27telemetry.h: Reword comment from citra to yuzuN00byKing1-1/+1
2018-03-27telemetry_session.h: Reword Documentation Comment from citra to yuzuN00byKing1-2/+2
2018-03-27Remove Links to citra ServicesN00byKing1-2/+2
2018-03-27Change Telemetry Names to yuzuN00byKing2-5/+5
2018-03-27settings: Remove unused CpuCore class.bunnei1-5/+0
2018-03-27config: Use simplified checkbox (from Citra) for CPU JIT.bunnei8-46/+33
2018-03-27config: Rename is_docked to use_docked_mode to be consistent with other config bools.bunnei7-14/+14
2018-03-27configure_general: Cleanup naming.bunnei1-14/+14
2018-03-27qt: Add config option for is_docked.bunnei2-0/+23
2018-03-27config: Add setting for whether the system is docked or not.bunnei5-2/+24
2018-03-27renderer_opengl: Use better naming for DrawScreens and DrawSingleScreen.bunnei2-8/+8
2018-03-27graphics_surface: Remove superfluous cast.bunnei1-2/+1
2018-03-27gl_rasterizer: Move code to bind framebuffer surfaces before draw to its own function.bunnei2-22/+31
2018-03-27gl_rasterizer: Add a SyncViewport method.bunnei3-18/+30
2018-03-27gl_rasterizer: Move PrimitiveTopology check to MaxwellToGL.bunnei2-11/+12
2018-03-27graphics_surface: Fix merge conflicts.bunnei2-3/+4
2018-03-27gl_rasterizer: Use ReadBlock instead of GetPointer for SetupVertexArray.bunnei1-1/+1
2018-03-27gl_rasterizer: Normalize vertex array data as appropriate.bunnei2-1/+5
2018-03-27memory: Fix cast for ReadBlock/WriteBlock/ZeroBlock/CopyBlock.bunnei1-4/+8
2018-03-27maxwel_to_gl: Fix string formatting in log statements.bunnei1-2/+2
2018-03-27rasterizer: Rename DrawTriangles to DrawArrays.bunnei3-5/+5
2018-03-27gl_rasterizer: Use passthrough shader for SetupVertexShader.bunnei1-1/+2
2018-03-27renderer_opengl: Logging, etc. cleanup.bunnei6-33/+34
2018-03-27renderer_opengl: Remove framebuffer RasterizerFlushVirtualRegion hack.bunnei1-5/+0
2018-03-27gl_rasterizer_cache: Implement UpdatePagesCachedCount.bunnei2-8/+37
2018-03-27memory: Add RasterizerMarkRegionCached code and cleanup.bunnei2-200/+195
2018-03-27gl_rasterizer: Implement SetupVertexArray.bunnei1-20/+38
2018-03-27gl_rasterizer_cache: Fix an ASSERT_MSG.bunnei1-1/+1
2018-03-27maxwell_to_gl: Add module and function for decoding VertexType.bunnei2-0/+41
2018-03-27maxwell_3d: Use names that match envytools for VertexType.bunnei1-8/+8
2018-03-27maxwell_3d: Add VertexAttribute struct and cleanup.bunnei1-121/+160
2018-03-27gl_rasterizer: Use 32 texture units instead of 3.bunnei3-2/+3
2018-03-27gl_rasterizer: Implement DrawTriangles.bunnei1-1/+194
2018-03-27Maxwell3D: Call AccelerateDrawBatch on DrawArrays.bunnei1-1/+8
2018-03-27gl_rasterizer: Implement AnalyzeVertexArray.bunnei2-1/+56
2018-03-27gl_rasterizer_cache: MortonCopy Switch-style.bunnei1-72/+32
2018-03-27gl_rasterizer_cache: Implement GetFramebufferSurfaces.bunnei2-4/+104
2018-03-27maxwell: Add RenderTargetFormat enum.bunnei2-4/+5
2018-03-27renderer_opengl: Only draw the screen if a framebuffer is specified.bunnei1-6/+7
2018-03-26GPU: Load the sampler info (TSC) when retrieving active textures.Subv2-21/+67
2018-03-26GPU: Added the TSC structure. It contains information about the sampler.Subv1-0/+50
2018-03-26GPU: Added more fields to the TIC structure.Subv1-4/+30
2018-03-26log.h: Change comment from citra to yuzuN00byKing1-1/+1
2018-03-26file_util.h: Update Comment from citra to yuzuN00byKing1-1/+1
2018-03-26yuzu.cpp: Update Link from citra to yuzuN00byKing1-1/+1
2018-03-26cpu_detect.cpp: Change comment from citra to yuzuN00byKing1-1/+1
2018-03-25main.cpp: Replace Citra with yuzu Wiki LinksN00byKing1-4/+4
2018-03-25main.cpp: Update Dialog from citra to yuzuN00byKing1-11/+11
2018-03-25Service/sockets: add bsd:s, nsd:a, nsd:u servicesmailwl8-32/+96
2018-03-25audren_u: Fix GetAudioDevice.bunnei2-7/+48
2018-03-25hid: Stub out SetNpadJoyAssignmentModeDual.bunnei1-1/+7
2018-03-25pl_u: Add RequestLoad.bunnei2-0/+11
2018-03-25GPU: Make the debug_context variable a member of the frontend instead of a global.Subv7-19/+40
2018-03-24GPU: Added a function to retrieve the active textures for a shader stage.Subv2-50/+59
TODO: A shader may not use all of these textures at the same time, shader analysis should be performed to determine which textures are actually sampled.
2018-03-24Frontend: Updated the surface view debug widget to work with Maxwell surfaces.Subv3-19/+38
2018-03-24Frontend: Allow opening the Surface View widget in the Qt frontend.Subv2-0/+8
2018-03-24GPU: Implement the Incoming/FinishedPrimitiveBatch debug breakpoints.Subv1-0/+7
2018-03-24GPU: Implement the MaxwellCommandLoaded/Processed debug breakpoints.Subv1-0/+10
2018-03-24Frontend: Ported the GPU breakpoints and surface viewer widgets from citra.Subv15-4/+1155
2018-03-24GPU: Added a method to unswizzle a texture without decoding it.Subv4-5/+95
Allow unswizzling of DXT1 textures.
2018-03-24GPU: Preliminary work for texture decoding.Subv5-0/+139
2018-03-24arm_dynarmic: Fix timingMerryMage1-7/+3
2018-03-24GPU: Added viewport registers to Maxwell3D's reg structure.Subv1-1/+18
2018-03-24gl_rasterizer: Fake render in green, because it's cooler.bunnei1-1/+1
2018-03-24gl_rasterizer: Log warning instead of sync'ing unimplemented funcs.bunnei1-7/+1
2018-03-23gl_rasterizer_cache: Add missing include for vm_manager.bunnei1-0/+1
2018-03-23renderer_opengl: Only invalidate the framebuffer region, not flush.bunnei1-4/+3
2018-03-23renderer_opengl: Fixes for properly flushing & rendering the framebuffer.bunnei2-12/+12
2018-03-23memory: Fix typo in RasterizerFlushVirtualRegion.bunnei1-3/+3
2018-03-23FS: Move the file open mode calculation to a separate function.Subv1-7/+14
2018-03-23RasterizerCacheOpenGL: FlushAll should flush full memory region.bunnei1-1/+1
2018-03-23memory: RasterizerFlushVirtualRegion should also check process image region.bunnei1-0/+1
2018-03-23rasterizer: Flush and invalidate regions should be 64-bit.bunnei5-12/+12
2018-03-23renderer_opengl: Add framebuffer_transform_flags member variable.bunnei1-2/+2
2018-03-23renderer_opengl: Better handling of framebuffer transform flags.bunnei4-6/+23
2018-03-23Remove Option for N/3DS from default.iniN00byKing1-4/+0
2018-03-23CITRA_ICON -> YUZU_ICONN00byKing1-1/+1
2018-03-23Service/SSL: add ssl servicemailwl6-0/+45
2018-03-23renderer_opengl: Use accelerated framebuffer load with LoadFBToScreenInfo.bunnei1-31/+25
2018-03-23nvdisp_disp0: Always flush and invalidate framebuffer region.bunnei1-0/+7
- Workaround for texture forwarding until we have a better place.
2018-03-23gl_rasterizer: Implement AccelerateDisplay method from Citra.bunnei2-2/+44
2018-03-23LoadGLBuffer: Use bytes_per_pixel, not bits.bunnei1-1/+2
2018-03-23memory: Port RasterizerFlushVirtualRegion from Citra.bunnei2-1/+58
2018-03-23gl_rasterizer_cache: LoadGLBuffer should do a morton copy.bunnei1-16/+5
2018-03-23video_core: Move MortonCopyPixels128 to utils header.bunnei2-111/+113
2018-03-23yuzu_cmd: change default cpu core to dynarmicValentin Vanelslande1-1/+1
2018-03-23default_ini: change default cpu core to dynarmicValentin Vanelslande1-1/+1
2018-03-23video_core: Remove usage of PAddr and replace with VAddr.bunnei5-39/+39
2018-03-23video_core: Move FramebufferInfo to FramebufferConfig in GPU.bunnei8-69/+77
2018-03-23gl_rasterizer: Replace a bunch of UNIMPLEMENTED with ASSERT.bunnei2-20/+20
2018-03-23gl_rasterizer: Add a simple passthrough shader in lieu of shader generation.bunnei2-5/+68
2018-03-23gpu: Expose Maxwell3D engine.bunnei1-0/+4
2018-03-23maxwell_3d: Add some format decodings and string helper functions.bunnei1-3/+107
2018-03-23renderer: Create rasterizer and cleanup.bunnei4-4/+16
2018-03-22Remove more N3DS ReferencesN00byKing2-20/+0
2018-03-22Remove dependency chronoDaniel Lim Wee Soong1-1/+0
Earlier chrono was included but after some code changed it was no longer needed Forgot to remove it so I'm removing it now
2018-03-22Change "yuzu starting..." to be logged with the new macroDaniel Lim Wee Soong1-1/+1
Just as a proof that it works
2018-03-22Logging: Create logging macros based on fmtlibDaniel Lim Wee Soong10-67/+112
Add a new set of logging macros based on fmtlib Similar but not exactly the same as https://github.com/citra-emu/citra/pull/3533 Citra currently uses a different version of fmt, which does not support FMT_VARIADIC so make_args is used instead. On the other hand, yuzu uses fmt 4.1.0 which doesn't have make_args yet so FMT_VARIADIC is used.
2018-03-22Service/spl: add module and servicesmailwl10-0/+176
2018-03-21CMake: Set EMU_ARCH_BITS in CMakeLists.txtN00byKing3-36/+0
2018-03-21FS: Implemented IFileSystem::CreateDirectory.Subv6-7/+29
2018-03-21GPU: Added vertex attribute format registers.Subv1-1/+14
2018-03-21Service/vi: convert services to modulemailwl8-212/+160
2018-03-21GPU: Added registers for the number of vertices to render.Subv1-2/+13
2018-03-20Service: add fatal:u, fatal:p servicesmailwl10-0/+146
2018-03-20renderer_gl: Port boilerplate rasterizer code over from Citra.bunnei5-1/+495
2018-03-20gl_shader_util: Sync latest version with Citra.bunnei3-46/+116
2018-03-20renderer_gl: Port over gl_shader_gen module from Citra.bunnei3-0/+88
2018-03-20FS: Implemented IFileSystem's OpenDirectory function.Subv1-0/+28
Note that the filter parameter is not yet implemented.
2018-03-20FS: Added the IDirectory IPC interface and implemented its two functions.Subv1-0/+51
2018-03-20FS: Implement DiskFileSystem's OpenDirectory interface.Subv5-6/+19
2018-03-20FS: Implement DiskFileSystem::GetEntryType for existing files/directories.Subv1-2/+4
2018-03-20FS: Updated the Directory Entry structure to match the Switch.Subv5-30/+84
2018-03-20FS: Support the file Append open mode.Subv2-2/+23
2018-03-20renderer_gl: Port over gl_shader_decompiler module from Citra.bunnei3-0/+87
2018-03-20renderer_gl: Port over gl_rasterizer_cache module from Citra.bunnei3-0/+1714
2018-03-20gl_resource_manager: Sync latest version with Citra.bunnei1-8/+77
2018-03-20renderer_gl: Port over gl_stream_buffer module from Citra.bunnei3-0/+218
2018-03-20gl_state: Sync latest version with Citra.bunnei2-47/+111
2018-03-20FS: Implement MountSdCard.Subv1-2/+6
2018-03-20FS: Added an SDMC archive factory and registered it to the SDMC archive on startup.Subv5-0/+79
2018-03-19GPU: Added Z buffer registers to Maxwell3D's reg structure.Subv1-1/+17
2018-03-19GPU: Added the render target (RT) registers to Maxwell3D's reg structure.Subv1-1/+32
2018-03-19Clang FixesN00byKing5-9/+11
2018-03-19oopsN00byKing1-3/+3
2018-03-19More Warning cleanupsN00byKing3-3/+3
2018-03-19Clean Warnings (?)N00byKing15-20/+20
2018-03-19GPU: Added the TSC registers to the Maxwell3D register structure.Subv1-1/+15
2018-03-19GPU: Added the TIC registers to the Maxwell3D register structure.Subv1-1/+16
2018-03-19vi: Remove DequeueBuffer and wait until next available buffer.bunnei3-12/+49
2018-03-19hle_ipc: Add SleepClientThread to block current thread within HLE routines.bunnei2-0/+47
2018-03-19hle_ipc: Use shared_ptr instead of unique_ptr to allow copies.bunnei2-9/+9
2018-03-19hle_ipc: Remove GetPointer(..) usage with WriteToOutgoingCommandBuffer.bunnei3-7/+14
2018-03-19thread: Add THREADSTATUS_WAIT_HLE_EVENT, remove THREADSTATUS_WAIT_ARB.bunnei4-23/+9
2018-03-19GPU: Implement macro 0xE1A BindTextureInfoBuffer in HLE.Subv2-1/+29
This macro simply sets the current CB_ADDRESS to the texture buffer address for the input shader stage.
2018-03-18GPU: Implement the BindStorageBuffer macro method in HLE.Subv2-1/+36
This macro binds the SSBO Info Buffer as the current ConstBuffer. This buffer is usually bound to c0 during shader execution. Games seem to use this macro instead of directly writing the address for some reason.
2018-03-18GPU: Handle writes to the CB_DATA method.Subv2-0/+39
Writing to this method will cause the written value to be stored in the currently-set ConstBuffer plus CB_POS. This method is usually used to upload uniforms or other shader-visible data.
2018-03-18GPU: Move the GPU's class constructor and destructors to a cpp file.Subv3-10/+30
This should reduce recompile times when editing the Maxwell3D register structure.
2018-03-18GPU: Store uploaded GPU macros and keep track of the number of method parameters.Subv4-27/+74
2018-03-18GPU: Macros are specific to the Maxwell3D engine, so handle them internally.Subv8-63/+55
2018-03-18GPU: Renamed ShaderType to ShaderStage as that is less confusing.Subv2-19/+19
2018-03-18GPU: Store shader constbuffer bindings in the GPU state.Subv2-5/+61
2018-03-18GPU: Corrected some register offsets and removed superfluous macro registers.Subv1-9/+3
2018-03-18GPU: Make the SetShader macro call do the same as the real macro's code.Subv2-3/+44
It'll now set the CB_SIZE, CB_ADDRESS and CB_BIND registers when it's called. Presumably this SetShader function is binding the constant shader uniforms to buffer 1 (c1[]).
2018-03-17GPU: Corrected the parameter documentation for the SetShader macro call.Subv2-11/+12
Register 0xE24 is actually a macro that sets some shader parameters in the register structure. Macros are uploaded to the GPU at startup and have their own ISA, we'll probably write an interpreter for this in the future.
2018-03-17GPU: Handle the SetShader method call (0xE24) and store the shader config.Subv2-4/+38
2018-03-17GPU: Added the vertex array registers.Subv1-2/+33
2018-03-17GPU: Process command mode 5 (IncreaseOnce) differently from other commands.Subv9-8/+97
Accumulate all arguments before calling the desired method. Note: Maybe we should do the same for the NonIncreasing mode?
2018-03-17GPU: Assert that we get a 0 CODE_ADDRESS register in the 3D engine.Subv1-0/+8
Shader address calculation depends on this value to some extent, we do not currently know what it being 0 entails.
2018-03-17GPU: Added Maxwell registers for Shader Program control.Subv1-2/+55
2018-03-17nvflinger: Remove superfluous buffer format check.bunnei1-3/+1
2018-03-17process: MirrorMemory should use MemoryState::Mapped.bunnei1-1/+1
2018-03-16process: Unmap previously allocated heap.bunnei1-1/+3
2018-03-16arm_interface: Support unmapping previously mapped memory.bunnei6-2/+18
2018-03-16svc: Use more correct values for GetInfo MapRegion and NewMapRegion.bunnei3-29/+5
2018-03-16kernel: Move stack region outside of application heap.bunnei6-11/+6
2018-03-16memory: Add regions for map region, "new" map region, etc.bunnei1-19/+29
2018-03-16process: Fix stack memory state.bunnei1-2/+4
2018-03-16MemoryState: Add additional memory states and improve naming.bunnei5-18/+45
2018-03-16IGeneralService: fix function listmailwl1-2/+3
2018-03-16Service/NIFM: stub cancel functionmailwl1-1/+6
2018-03-16Service/NIFM: convert to modulemailwl8-122/+75
2018-03-14core: Move process creation out of global state.bunnei22-72/+87
2018-03-05GPU: Intercept writes to the VERTEX_END_GL register.Subv2-1/+18
This is the register that gets written after a game calls DrawArrays(). We should collect all GPU state and draw using our graphics API here.
2018-03-04FS: Use the correct error code when trying to open files that don't exist.Subv2-26/+6
2018-03-04FS: Stubbed CreateSaveData. It currently does nothing.Subv2-0/+15
2018-03-04FS: Make EnsureSaveData create the savedata folder when called for the first time.Subv8-17/+70
2018-03-04CoreTiming: Unschedule the pending events when an Interface is destroyed.Subv3-2/+10
2018-03-03Vi: Signal the BufferQueue's Native Handle right after ReleaseBuffer is called.Subv1-0/+3
This prevents a thread starvation issue in Puyo Puyo Tetris. We should hwtest this behavior and figure out where exactly this event is signaled.
2018-03-03Service/Set: add more servicesmailwl12-10/+348
2018-03-02SaveData: Use the current titleid when opening the savedata archive.Subv1-2/+3
2018-03-02Kernel: Store the program id in the Process class instead of the CodeSet class.Subv9-26/+25
There may be many CodeSets per Process, so it's wasteful and overcomplicated to store the program id in each of them.
2018-03-02FS: Implement MountSaveData and some of the IFile interface.Subv2-0/+189
2018-03-02Filesystem: Added a SaveData Factory and associated Disk_FileSystem.Subv10-16/+329
2018-02-27thread: Clear the process list on shutdown.Jules Blok1-1/+3
2018-02-27ResultCode: Mark any error code that isn't 0 as an error.Subv1-2/+2
2018-02-27Removes the use of QKeySequence::Cancel (#186)Vishal Sharma1-1/+2
* Removes the use of QKeySequence::Cancel to remove issues while running make * Corrects characters in a line for travis failure * Corrects space in a line for travis failure
2018-02-26file_sys: Style tweaksshinyquagsire232-11/+5
Asdf
2018-02-25loader: Check error on NPDM load, use TID for CodeSetshinyquagsire233-6/+10
2018-02-25loader: Use NPDM information when loading NSOsshinyquagsire232-4/+15
2018-02-25file_sys: Add support for parsing NPDM filesshinyquagsire233-0/+276
2018-02-25(Hopefully) Fix MinGW BuildN00byKing1-1/+1
2018-02-25Implements citra-emu/citra#3184N00byKing7-41/+41
2018-02-25Add UnmapSharedMemoryN00byKing2-1/+17
C++11 requires spaces on the Identifier Add inttypes include clang
2018-02-23time: Add missing time:s functions, used for libnxshinyquagsire231-0/+4
2018-02-22Stub more functionsmailwl7-8/+90
2018-02-22Stub am::SetScreenShotPermission, and bsd::StartMonitoring functionsmailwl5-1/+22
2018-02-22time: Add GetStandardLocalSystemClock, used by libnxshinyquagsire233-0/+9
2018-02-21dynarmic: Update to 6b4c6b0MerryMage1-2/+18
6b4c6b0 impl: Update PC when raising exception 7a1313a A64: Implement FDIV (vector) b2d781d system: Raise exception for YIELD, WFE, WFI, SEV, SEVL b277bf5 Correct FPSR and FPCR 7673933 A64: Implement USHL 8d0e558 A64: Implement UCVTF (vector, integer), scalar variant da9a4f8 A64: Partially implement FCVTZU (scalar, fixed-point) and FCVTZS (scalar, fixed-point) 7479684 A64: Implement system register TPIDR_EL0 0fd75fd A64: Implement system registers FPCR and FPSR 31e370c A64: Implement system register CNTPCT_EL0 9a88fd3 A64: Implement system register CTR_EL0 1d16896 A64: Implement NEG (vector) 3184edf IR: Add IR instruction ZeroVector 31f8fbc emit_x64_floating_point: Add maybe_unused to preprocess parameter 567eb1a A64: Implement FMINNM (scalar) c6d8fa1 A64: Implement FMAXNM (scalar) 616056d constant_pool: Add frame parameter a3747cb A64: Implement ADDP (scalar) 5cd5d9f reg_alloc: Only exchange GPRs dd0452a A64: Implement DUP (element), scalar variant e5732ea emit_x64_floating_point: Correct FP{Max,Min}{32,64} implementations for -0/+0 40eb9c3 A64: Implement FMAX (scalar), FMIN (scalar) 7cef39b fuzz_with_unicorn: QEMU's implementation of FCVT is incorrect 826dce2 travis: Switch unicorn repository 9605f28 a64/config: Allow NaN emulation accuracy to be set e9435bc a64_emit_x64: Add conf to A64EmitContext 30b596d fuzz_with_unicorn: Explicitly test floating point instructions be292a8 A64: Implement FSQRT (scalar) 3c42d48 backend_x64: Accurately handle NaNs 4aefed0 fuzz_with_unicorn: Print AArch64 disassembly
2018-02-21arm_dynarmic: LOG_INFO on unicorn fallbackMerryMage1-0/+4
2018-02-21memory: LOG_ERROR when falling off end of page tableMerryMage1-0/+11
2018-02-21core: Fix scheduler-shutdown related crashMerryMage1-5/+9
2018-02-20Add warning if Domain request has no domain message headermailwl1-0/+3
2018-02-20Fix: change check for domain order and existance of domain message headermailwl3-3/+4
2018-02-20IPC: add domain header to response if only it exists in requestmailwl3-6/+8
2018-02-20Service/AOC: stub ListAddOnContent functionmailwl4-2/+28
2018-02-19acc_u0: Stub ListOpenUsers service function.bunnei2-1/+11
2018-02-19service: Add Friend service interface.bunnei6-0/+100
2018-02-19logging: Add category for Friend service.bunnei2-0/+2
2018-02-19scheduler: Cleanup based on PR feedback.bunnei3-5/+4
2018-02-19AM: Corrected the response in EnsureSaveData.Subv1-1/+2
The values are still unknown and the function is still considered a stub. Puyo Puyo Tetris now tries to call fsp-srv:MountSaveData.
2018-02-18kernel: Use Scheduler class for threading.bunnei6-174/+26
2018-02-18kernel: Add Scheduler, which encapsulates the scheduling loading from Thread module.bunnei3-0/+210
2018-02-18core: Use shared_ptr for cpu_core.bunnei2-6/+4
2018-02-18kernel: Remove unused address_arbiter code.bunnei5-199/+0
2018-02-18 Kernel/IPC: Add a small delay after each SyncRequest to prevent thread starvation.Subv4-50/+63
Ported from citra PR #3091 The delay specified here is from a Nintendo 3DS, and should be measured in a Nintendo Switch. This change is enough to prevent Puyo Puyo Tetris's main thread starvation.
2018-02-17nvmap: Make IocFromId return the same existing handle instead of creating a new one.Subv1-5/+2
Games like Puyo Puyo Tetris and BOTW seem to depend on the buffer always having the same handle
2018-02-17Parcel: Ensure we don't read past the end of the parcels in Vi.Subv1-0/+5
2018-02-17Vi: Mark all fences as NO_FENCE in the DequeueBuffer response parcel.Subv1-2/+2
2018-02-17Vi: Always write the IGBPBuffer in the RequestBuffer response parcel.Subv1-1/+2
This may break libnx homebrew due to a bug in libnx but is required by official games since they always assume that the buffer will be there.
2018-02-16Service/hid: stub some functionsmailwl4-1/+98
2018-02-15nvhost-ctrl: Stub NVHOST_IOCTL_CTRL_EVENT_WAIT.Subv2-0/+25
2018-02-15Vi: Mark the fences as valid in the DequeueBuffer response parcel.Subv1-0/+3
2018-02-15Vi: Added a missing u32 in the DequeueBuffer response parcel.Subv1-0/+1
2018-02-15Vi: Don't write the IGBPBuffer in the IGBPRequestBufferResponseParcel.Subv1-4/+2
2018-02-15Vi: Properly write the BufferProducerFence object in the DequeueBuffer response parcel.Subv2-18/+28
2018-02-15shared_memory: Remove some checks.bunnei1-13/+0
2018-02-15pl_u: Implement basic shared font loading from RAM dump.bunnei6-0/+182
2018-02-15log: Add logging category for NS services.bunnei2-0/+2
2018-02-15hid: Stub GetVibrationDeviceInfo and SendVibrationValues.bunnei1-0/+15
2018-02-14hle_ipc: Remove const from WriteBuffer size.bunnei2-2/+2
2018-02-14pls, that was easyHexagon121-1/+1
2018-02-14Fix fps counter to correctly measure frame end when there was no frame to drawJames Rowe1-0/+2
2018-02-14memory: Silence formatting sepecifier warningsLioncash1-21/+30
2018-02-14nso: Silence formatting specifier warningsLioncash1-2/+4
2018-02-14deconstructed_rom_directory: Silence formatting specifier warningsLioncash1-3/+4
2018-02-14nvdrv/interface: Silence formatting specifier warningsLioncash1-1/+2
2018-02-14nvmap: Silence formatting specifier warningsLioncash1-1/+2
2018-02-14nvhost_gpu: Silence formatting specifier warningsLioncash1-6/+8
2018-02-14nvhost_ctrl: Silence formatting specifier warningsLioncash1-2/+2
2018-02-14nvhost_ctrl_gpu: Silence formatting specifier warningsLioncash1-3/+4
2018-02-14nvhost_as_gpu: Silence formatting specifier warningsLioncash1-5/+7
2018-02-14thread: Silence formatting specifier warningsLioncash1-2/+3
2018-02-14vm_manager: Silence formatting specifier warningsLioncash1-5/+7
2018-02-14gdbstub: Silence formatting specifier warningsLioncash1-6/+9
2018-02-14hle_ipc: Add GetReadBufferSize and check write buffer size.bunnei2-0/+10
2018-02-14debugger: Fix wait_tree crash.bunnei1-1/+1
2018-02-14service: Remove remaining uses of BufferDescriptor*.bunnei5-14/+8
2018-02-14audio: Use WriteBuffer instead of BufferDescriptorB.bunnei2-9/+3
2018-02-14vi: Eliminate direct usage of BufferDescriptorB.bunnei1-14/+3
2018-02-14nvdrv: Use ReadBuffer/WriteBuffer functions for Ioctl.bunnei1-17/+5
2018-02-14vi: Use ReadBuffer/WriteBuffer functions for TransactParcel.bunnei1-44/+19
2018-02-14hle_ipc: Add helper functions for reading and writing buffers.bunnei1-4/+2
2018-02-14maxwell_3d: Make constructor explicitLioncash1-1/+1
2018-02-14hle_ipc: Add helper functions for reading and writing buffers.bunnei3-0/+55
2018-02-14vi: Fix TransactParcelAuto to support both buffer formats.bunnei1-25/+16
2018-02-14audren_u: Schedule reoccuring event. (#183)bunnei2-6/+36
* audren_u: Schedule reoccuring event. * audren_u: Stub GetAudioRenderersProcessMasterVolume, and misc. changes.
2018-02-13Service/lm: add support to multiline logsmailwl1-20/+49
2018-02-13vi: Add FENCE_HACK, which is useful for booting BOTW.bunnei1-7/+21
2018-02-13vi: Stub TransactParcel CancelBuffer.bunnei1-0/+2
2018-02-13TransactParcel: Move WriteBlock to narrowest scope.bunnei1-10/+13
2018-02-12arm_dynarmic: Support direct page table accessMerryMage2-10/+19
2018-02-12Add RequestUpdateAudioRenderer, StartAudioRenderer and StopAudioRenderer stubs to audren:ugdkchan1-2/+76
2018-02-12GPU: Partially implemented the QUERY_* registers in the Maxwell3D engine.Subv3-3/+95
Only QueryMode::Write is supported at the moment.
2018-02-12Make a GPU class in VideoCore to contain the GPU state.Subv20-76/+125
Also moved the GPU MemoryManager class to video_core since it makes more sense for it to be there.
2018-02-12GPU: Added a command processor to decode the GPU pushbuffers and forward the commands to their respective engines.Subv12-3/+285
2018-02-12nvdrv: Make the GPU memory manager available to nvhost-gpu.Subv3-6/+16
2018-02-12renderer_opengl: Support framebuffer flip vertical.bunnei3-5/+13
2018-02-12vi: Parse IGBPQueueBufferRequestParcel params and expose buffer flip vertical.bunnei6-11/+46
2018-02-11vi: Fix OpenLayer and CreateStrayLayer.bunnei1-6/+8
2018-02-10fsp_srv: Stub MountSdCard.bunnei2-0/+9
2018-02-10apm: Refactor service impl. to support multiple ports.bunnei5-58/+102
2018-02-10vi: Implement TransactParcelAuto.bunnei1-32/+46
2018-02-10nvflinger: (Hack) Use first available buffer if none are found.bunnei1-1/+5
2018-02-10IGBPQueueBufferRequestParcel: Don't enforce buffer length.bunnei1-1/+0
- Another fix for libnx.
2018-02-10IGBPRequestBufferResponseParcel: Fix response for libnx.bunnei1-7/+4
2018-02-09nvdrv: Fix QueryEvent for libnx.bunnei2-4/+8
2018-02-09IApplicationDisplayService::CloseDisplay: Fix response params size.bunnei1-1/+1
2018-02-09nvhost_ctrl_gpu: Implement ZCullGetInfo.bunnei1-2/+14
2018-02-09dynarmic: Update to 41ae12263MerryMage2-31/+45
Changes: Primarily implementing more A64 instructions
2018-02-09acc_u0: Implement ListAllUsers.bunnei2-2/+15
2018-02-08nvhost_as_gpu: Implement AllocateSpace and MapBufferEx.bunnei2-10/+33
2018-02-08nvdrv: Add MemoryManager class to track GPU memory.bunnei3-0/+162
2018-02-08nvmap: Refactor to expose nvmap objects.bunnei2-19/+22
2018-02-08nvhost_as_gpu: Add nvmap as a class member.bunnei3-2/+9
2018-02-07Service: stub some functions in am, audio, time, vi servicesmailwl9-6/+191
2018-02-06Service/hid: stub SetNpadHandheldActivationModemailwl1-0/+7
2018-02-06mutex: Update hasWaiters on release.bunnei1-0/+1
2018-02-06hid: Stub ActivateTouchScreen and SetNpadJoyHoldType.bunnei1-2/+14
2018-02-06Extra nvdrv support (#162)David17-37/+765
* FinishInitalize needed for 3.0.1+ games * nvdrv:s and nvdrv:t both use NVDRV * Most settings return 0 on hardware, disabled NV_MEMORY_PROFILER for now. NVN_THROUGH_OPENGL & NVRM_GPU_PREVENT_USE are a few interesting settings to look at. Carefully choosing settings can help with drawing graphics later on * Initial /dev/nvhost-gpu support * ZCullBind * Stubbed SetErrorNotifier * Fixed SetErrorNotifier log, Added SetChannelPriority * Allocate GPFIFO Ex2, Allocate Obj Ctx, Submit GPFIFO * oops * Fixed up naming/structs/enums. Used vector instead of array for "gpfifo_entry" * Added missing fixes * /dev/nvhost-ctrl-gpu * unneeded struct * Forgot u32 in enum class * Automatic descriptor swapping for ioctls, fixed nvgpu_gpu_get_tpc_masks_args being incorrect size * nvdrv#QueryEvent * Renamed logs for nvdrv * Refactor ioctl so nv_result isn't needed * /dev/nvhost-as-gpu * Fixed Log service naming, CtxObjects now u32, renamed all structs, added static_asserts to structs, used INSERT_PADDING_WORDS instead of u32s * nvdevices now uses "Ioctl" union, * IoctlGpfifoEntry now uses bit field * final changes
2018-02-06IApplicationFunctions: Stub out EnsureSaveData.bunnei2-0/+8
2018-02-05Dont call UNIMPLEMENTED for 'empty services', just return error codeDavid Marcec1-0/+2
2018-02-05Changed .istorage to .romfsDavid Marcec2-5/+5
2018-02-05set: GetAvailableLanguageCodes should not return lang_codes size.bunnei1-2/+3
2018-02-05nvflinger: Signal BufferQueue native handle event.bunnei1-0/+1
- This gets BOTW booting.
2018-02-05logger: Add Time service logging category.bunnei3-10/+12
2018-02-05logger: Add SET service logging category.bunnei3-16/+12
2018-02-05logger: Add PCTL service logging category.bunnei3-1/+3
2018-02-05logger: Add LM service logging category.bunnei3-2/+4
2018-02-05logger: Add APM service logging category.bunnei3-2/+5
2018-02-05lm: Ensure log string is non-empty before checking back().bunnei1-1/+1
2018-02-05logger: Add NIFM service logging category.bunnei6-11/+13
2018-02-05logger: Add VI service logging category.bunnei6-21/+22
2018-02-05hid: Stub out several functions.bunnei1-1/+39
2018-02-04hid: Implement CreateActiveVibrationDeviceList.bunnei1-0/+25
2018-02-04logger: Use Service_HID category where applicable.bunnei1-2/+2
2018-02-04logger: Use Service_NVDRV category where applicable.bunnei2-10/+10
2018-02-04logger: Add AM service logging category.bunnei5-42/+44
2018-02-04logger: Add "account" service logging category.bunnei3-8/+10
2018-02-04acc_u0: Stub out GetLastOpenedUser.bunnei2-0/+10
2018-02-04GetInfo: Implement IsCurrentProcessBeingDebugged.bunnei1-0/+3
2018-02-04WaitProcessWideKeyAtomic: Handle case where condition variable was already created.bunnei3-13/+17
2018-02-04acc:u0 : stub GetAccountIdmailwl1-1/+9
2018-02-03svc: SharedMemory size should be 64-bits and cleanup.bunnei3-11/+11
2018-02-03ArbitrateLock: Assert that requesting_thread is current_thread.bunnei1-0/+1
2018-02-03controller: DuplicateSession should return a ClientSession.bunnei1-4/+9
2018-02-03Service:nifm: add nifm:a, nifm:s and nifm:u servicesmailwl10-0/+378
2018-02-02Service/am: Add AppletAE service (#153)mailwl7-379/+571
* Add AppletAE, step 1: move common interfaces to am.h * Add AppletAE, step 2
2018-02-02Services/vi: add vi:s and vi:u servicesmailwl6-0/+128
2018-02-02vi::CreateStrayLayer : add padding to requestmailwl1-0/+1
2018-01-30shared_memory: Only mark addresses as invalid if they are within the heapshinyquagsire231-1/+2
2018-01-30[WIP] sfdnsres: stub (#146)mailwl5-2/+52
sfdnsres: Add several stubs
2018-01-27memory: Replace all memory hooking with Special regionsMerryMage11-441/+273
2018-01-26time: Implement ISteadyClock::GetCurrentTimePoint.bunnei2-1/+22
2018-01-25audout_u: Various cleanups.bunnei1-29/+17
2018-01-25ResponseBuilder: Use a bit field for customizing instead of always_move_handles.bunnei3-11/+21
2018-01-25time: Stub GetSystemClockContext function.bunnei2-2/+17
2018-01-25server_session: Fix scenario where all domain handlers are closed.bunnei1-3/+3
2018-01-25hle: Rename RequestBuilder to ResponseBuilder.bunnei19-128/+129
2018-01-25service: Fix all incorrect IPC response headers.bunnei14-82/+42
2018-01-25ipc_helpers: Make interface domain agnostic and add header validation.bunnei2-25/+58
2018-01-25hle: Integrate Domain handling into ServerSession.bunnei7-38/+74
2018-01-25hle: Remove Domain and SyncObject kernel objects.bunnei10-169/+2
2018-01-25handle_table: Remove ConvertSessionToDomain.bunnei2-17/+0
2018-01-25audout:u OpenAudioOut and IAudioOut (#138)st4rk4-14/+168
* Updated the audout:u and IAudioOut, now it might work with RetroArch without trigger an assert, however it's not the ideal implementation * Updated the audout:u and IAudioOut, now it might work with RetroArch without trigger an assert, however it's not the ideal implementation * audout:u OpenAudioOut implementation and IAudioOut cmd 1,2,3,4,5 implementation * using an enum for audio_out_state as well as changing its initialize to member initializer list * Minor fixes, added Service_Audio for LOG_*, changed PcmFormat enum to EnumClass * Minor fixes, added Service_Audio for LOG_*, changed PcmFormat enum to EnumClass * added missing Audio loggin subclass, minor fixes, clang comment breakline * Solving backend logging conflict * minor fix * Fixed duplicated Service NVDRV in backend.cpp, my bad
2018-01-24Fix time returning epoch time in milliseconds rather than in secondsgdkchan1-1/+1
2018-01-24logging: add missing NVDRV subclass to macro listRozlette1-0/+1
2018-01-23Correct SpellingN00byKing1-2/+2
2018-01-23Services: Added a todo about returning interfaces as domain objects in lm, hid and time.Subv3-0/+12
2018-01-22Time: Don't create unnecessary ports when retrieving the clock service sessions.Subv1-33/+27
2018-01-22HID: Don't create an unnecessary port in CreateAppletResource.Subv1-13/+13
2018-01-22LM: Don't create an unnecessary port in Initialize.Subv2-15/+10
2018-01-22IPC: Don't create an unnecessary port when using PushIpcInterface outside of a domain.Subv1-4/+5
2018-01-22Stub OpenAudioOut and fix a issue with HID IAppletResource being created more than oncegdkchan3-2/+21
2018-01-22AppletOE: Stubbed CreateManagedDisplayLayer to create a new layer in the Default display.Subv1-0/+14
This function is used by libnx to obtain a new layer.
2018-01-22AppletOE: Make ISelfController keep a reference to nvflinger.Subv5-10/+32
It'll be needed when we implement CreateManagedDisplayLayer.
2018-01-22Services: Vi shouldn't be responsible for creating nvflinger.Subv5-7/+13
It is now created during Service initialization and passed to all the services that need it.
2018-01-22VI: Move BufferQueue and NVFlinger to their own folder/namespace.Subv9-363/+452
2018-01-22Added stubs for audio services. (#116)st4rk12-5/+309
* stubs for audout:u, audin:u, audrec:u, audren:u, codecctl and decoding tables with nullptr for future implementations * fixing the changes requested (remove private, explicit)
2018-01-21Added nvmemp, Added /dev/nvhost-ctrl, SetClientPID now stores pid (#114)David9-5/+163
* Added nvmemp, Added /dev/nvhost-ctrl, SetClientPID now stores pid * used clang-format-3.9 instead * lowercase pid * Moved nvmemp handlers to cpp * Removed unnecessary logging for NvOsGetConfigU32. Cleaned up log and changed to LOG_DEBUG * using std::arrays instead of c arrays * nvhost get config now uses std::array completely * added pid logging back * updated cmakelist * missing includes * added array, removed memcpy * clang-format6.0
2018-01-21nvmap: Add a return 0 underneath the UNIMPLEMENTED macroLioncash1-0/+1
This macro resolves to an empty macro in release builds.
2018-01-21nvmap: Make IoctlCommands an enum classLioncash2-12/+12
Prevents the enum values from polluting the surrounding scope
2018-01-21file_sys: Clang format fixes.bunnei3-4/+4
2018-01-21fsp_srv: Various improvements to IStorage:Read implementation.bunnei5-48/+79
2018-01-21deconstructed_rom_directory: Implement istorage loading for RomFS.bunnei2-2/+71
2018-01-21filesystem: Implement basic IStorage functionality.David Marcec6-0/+258
2018-01-21file_sys: Cleanup to better match Switch file system constructs.bunnei10-63/+136
file_sys: Add factory class for RomFS file system.
2018-01-21file_sys: Remove disk_archive, savedata_archive, and title_metadata.bunnei7-835/+0
2018-01-21archive_backend: Minor changes to match Switch IFileSystem.bunnei5-26/+26
2018-01-21file_sys: Repurpose 3DS IVFC code for Switch ROMFS.bunnei3-51/+43
2018-01-21gdbstub: Update registers and sizes for aarch64Rozlette1-113/+155
This gets gdbstub working at least to the point where clients can communicate with it. What works: - Reading/writing GPRegs - Reading/writing memory - Interrupting the emulated program and continuing What does NOT work: - Breakpoints. Sizes have been updated to u64, but support will need to be added in the interpreter for them to work. - VRegs. Mostly because my gdb was having issues with 128-bit regs for some reason. However, the current u128 representation is a bit awkward to use and should probably be updated first.
2018-01-21VI: Implement the Query transaction of IHOSBinderDriver, and stubbed some results.Subv2-0/+58
2018-01-21Fix spelling error in CMakeListsMatthew Brener1-1/+1
Minor spelling error of its --> it's
2018-01-21service/time: remove accidental #pragmastgsm2-4/+0
2018-01-21loader: Minor style fix in deconstructed_rom_directoryRozlette1-1/+0
2018-01-21Format: Run the new clang format on everythingJames Rowe74-117/+207
2018-01-20memory: Return false for large VAddr in IsValidVirtualAddressRozlette1-0/+3
2018-01-20loader: Clean up ctors and includes.bunnei10-18/+22
2018-01-20loader: Add DeconstructedRomDirectory for game dumps.bunnei5-0/+156
2018-01-20loader: Refactor to also pass filepath into IdentifyType.bunnei8-19/+19
2018-01-20nso: Remove code specific to directory loading.bunnei2-17/+6
2018-01-20Port citra #3352 to yuzu (#103)River City Ransomware3-4/+25
* Port citra #3352 to yuzu This change allows non x86_64 architectures to compile yuzu by skipping the building of dynarmic * Fixed clang-format errors * fixes more clang-format errors
2018-01-20Added CreateSharedMemory & UNIMPLEMENTED() for non existent services. (#113)David3-1/+23
* Added svcCreateSharedMemory * Services which are not implemented now throw UNIMPLEMENTED() * clang-format * changed perms to u32 * removed camelcase
2018-01-20Fixes some cast warnings, partial port of citra #3064 (#106)River City Ransomware6-21/+22
* Fixes some cast warnings, partially fixes citra #3064 * Converted casts to uint32_t to u32 * Ran clang-format
2018-01-19acc, set, applet_oe: stub various functions, add set service (#105)goaaats8-0/+161
* Stubs for various acc:u0 funcs needed * Stub for GetDesiredLanguage in IApplicationFunctions * Add set service + stubs needed for games * Fix formatting * Implement IProfile, IManagerForApplication, return bool in CheckAvailability, style fixes * Remove IProfile::Get(needs more research), fix IPC response sizes
2018-01-19ISelfController: Stub LockExit and UnlockExitRozlette1-0/+16
2018-01-19time: Add new line to ends of files.bunnei4-4/+4
2018-01-19applet_oe: Clang-format.bunnei1-2/+1
2018-01-19time: Stub out GetTotalLocationNameCount and some cleanup.bunnei2-4/+12
2018-01-19nvdrv: Stub SetClientPID.bunnei2-0/+13
2018-01-19svc: Fix svcGetInfo MapRegionBaseAddr.bunnei3-1/+9
2018-01-19svc: Add additional fields to MemoryInfo struct.bunnei1-0/+4
2018-01-19Fix dispdrv typogdkchan1-1/+1
2018-01-19qt: Migrate to Qt 5 signal/slot connection syntax where applicableLioncash5-31/+31
2018-01-18ui: Rename almost all classes in configuration_input.ui (#99)Evgeni Danailov1-66/+66
* Rename verticalLayout_25 to verticalLayout_23. * Rename almost all classes.
2018-01-18Port citra #3336 - Resizes the configuration window to not be so stretched outRiver City Ransomware1-1/+1
2018-01-18Fix NRO Entry Pointgdkchan1-2/+2
2018-01-18Stub PopLaunchParameter and implement Buffer C Descriptors reading on hle_ipc (#96)gdkchan5-7/+127
* Stub PopLaunchParameter and implement Buffer C Descriptors reading * Address PR feedback * Ensure we push a u64 not a size_t * Fix formatting
2018-01-18Start to implement/stub BSD:U and SFDNSRES services (#78)flerovium^-^7-0/+159
* bsd: start stubbing bsd:u and sfdnsres * bsd: stubbed RegisterClient * bsd: attempt to get past socket() * bsd: fix some wrong assumptions about IPC * bsd: fix format specifiers * bsd: stubbed Connect() * bsd: stubbed SendTo() * made requested changes * sockets: respect alphabetical order at service installation * run clang-format * bsd: start stubbing bsd:u and sfdnsres * bsd: stubbed RegisterClient * bsd: attempt to get past socket() * bsd: fix some wrong assumptions about IPC * bsd: fix format specifiers * bsd: stubbed Connect() * bsd: stubbed SendTo() * made requested changes * sockets: respect alphabetical order at service installation * run clang-format * run clang-format (2)
2018-01-18time: Fix use of CamelCase in ToCalendarTimeWithMyRuleRozlette1-6/+6
2018-01-18time: Refactor time:* to use a single shared moduleRozlette7-26/+107
2018-01-18lm: Minor logging fix to skip a byte.bunnei1-0/+7
2018-01-18CMakeLists: Derive the source directory grouping from targets themselvesLioncash7-360/+338
Removes the need to store to separate SRC and HEADER variables, and then construct the target in most cases.
2018-01-18controller: Use DuplicateSession for DuplicateSessionEx.bunnei2-1/+8
2018-01-18svc: Rename some entries to match their analogue on SwitchBrewLioncash1-7/+7
Makes the codebase a little more consistent with regards to available documentation. Also amends the duplicate case where there was a similar entry at 0x72 named ConnectToPort.
2018-01-18svc: Add CreateJitMemory and MapJitMemory svc stringsLioncash1-2/+2
Makes the table match SwitchBrew for these entries
2018-01-18vi: Make constructors explicit where applicableLioncash1-13/+14
Prevents implicit conversions.
2018-01-18vi: Add missing override specifiersLioncash1-7/+7
2018-01-18vi: Copy data directly into the std::vector within Parcel's ReadBlock functionLioncash1-2/+3
Previously this would unnecessarily zero-initialize the vector before copying the actual data into the vector instance.
2018-01-18hotkeys: Add missing <QTreeWidgetItem> includeLioncash1-0/+1
2018-01-18game_list: Add missing override specifier for KeyReleaseEater's eventFilter functionLioncash1-1/+1
2018-01-18game_list: Amend doxygen parameter identifiers for containsAllWords()Lioncash1-2/+2
2018-01-18telemetry: Silence initialization order warningsLioncash1-2/+2
2018-01-18input_common/sdl: Silence a -Wpessimizing-move warningLioncash1-1/+1
2018-01-18bootmanager: Minor tidiness/correctness changesLioncash2-7/+6
Moved over from #3266 in citra.
2018-01-18Fix NRO loadinggdkchan1-20/+9
2018-01-17 Implement Pull #3306 from citra: citra_qt: Drop Qt 5 version checks in code (#41)N00byKing1-13/+1
* Update bootmanager.cpp * This *should* fix the clang error
2018-01-17TIME: consolidate time:* interfaces, stub functions and structsRozlette5-85/+164
2018-01-17Remove relocation on NSO/NROgdkchan3-19/+2
2018-01-17Update CMakeLists.txtN00byKing1-0/+1
2018-01-17Update title_metadata.hN00byKing1-0/+1
2018-01-17svc: Clang-format fix.bunnei1-6/+4
2018-01-17Update core.cppN00byKing1-1/+0
2018-01-17Update default_ini.hN00byKing1-2/+2
2018-01-17hle_ipc: Clang format.bunnei1-2/+3
2018-01-17Fixed formattingnoah katz1-2/+2
2018-01-17nvdrv: stubbed Close(cmd 2)Frederic Meyer4-0/+26
2018-01-17Fix gdbstub typo, fixes Citra #3318River City Ransomware1-1/+1
Core::System().GetInstance().IsPoweredOn() -> Core::System::GetInstance().IsPoweredOn()
2018-01-17hid: Adjust timing based on actual hardwareshinyquagsire231-3/+3
2018-01-17ipc: Implement domain command CloseVirtualHandle.bunnei3-3/+34
2018-01-17loggin: Add IPC logging category.bunnei2-1/+3
2018-01-17UI: Fix frame rate perf statsJames Rowe2-1/+4
Adds in a missing EndGameFrame when nvdrv swaps buffers
2018-01-17acc_u0: Add IPC interface and stub InitializeApplicationInfo.bunnei6-0/+86
2018-01-17hid: clang-formatshinyquagsire231-3/+3
2018-01-17hid: Adjust for style guideshinyquagsire232-63/+68
2018-01-17applet_oe: Fix GetOperationMode and GetPerformanceMode.bunnei1-2/+2
2018-01-17Fix non translated string (same as Citra PR 2949)noah katz1-1/+1
2018-01-17NV: Implemented the nvdrv service, which uses the same interface as nvdrv:aSubv4-16/+18
2018-01-17NV: Move the nvdrv classes into the Nvidia namespace, and move the functionality to a s single module that services call.Subv13-165/+95
2018-01-17VI: Stubbed GetNativeHandle, Create/DestroyStrayLayer and CloseDisplaySubv2-3/+85
2018-01-17Services: Stubbed APM::OpenSession and the ISession interface.Subv3-2/+53
# Conflicts: # src/core/hle/service/am/applet_oe.cpp # src/core/hle/service/apm/apm.cpp
2018-01-17AppletOE: Stub a bunch of functions required by libnx homebrew.Subv1-4/+62
2018-01-17SVC: Correct some return values in svcGetInfo and added TitleId and PrivilegedProcessId stubs.Subv1-6/+21
# Conflicts: # src/core/hle/kernel/svc.cpp
2018-01-17SVC: Add 4.0.0+ comment to GetInfoType enum values.Subv1-0/+1
2018-01-17IPC: Push domain objects as move handles when not in a domain.Subv2-2/+28
2018-01-17Update memory.hDavid1-2/+2
2018-01-16SetThreadCoreMask stub, time to implement fspDavid Marcec1-1/+6
2018-01-16implemented more of ISelfController and IApplicationFunctionsDavid Marcec1-0/+53
2018-01-16Added more svcGetInfo pairsDavid Marcec4-2/+29
2018-01-16Increased heap size and changed tls area vaddrDavid Marcec1-2/+2
2018-01-16Use static functions instead of lambdasmuemart1-49/+46
2018-01-16Add translation support for button labelsmuemart1-14/+15
2018-01-16Add button labels for sdl joystick mappingsmuemart1-17/+46
2018-01-16clang-formatMerryMage25-63/+54
2018-01-16Implement Pull #3030 from CitraTobias1-6/+6
citra-qt: Rename derivative class name
2018-01-16nso: Modify .bss size calculation logicRozlette1-3/+7
2018-01-16Update game_list.cppN00byKing1-1/+1
2018-01-16Update CMakeLists.txtN00byKing1-5/+1
2018-01-16Build: Automagically handle unicornJames Rowe1-1/+1
On MSVC if unicorn isn't found, fallback to bundled unicorn On everything else, fallback to building unicorn in externals Also fixes loading unicorn in msvc
2018-01-16Implement Pull #3333 from citra: citra_qt: Pause emulation on CoreError (#39)N00byKing2-0/+2
2018-01-16Merge citra-emu PR#3159 by FearlessTobi(citra-qt : Fix a bug in our fullscreen implementation)goaaats2-15/+31
2018-01-16Merge citra-emu PR#3001 by Styleoshin(citra-qt : Adding fullscreen mode)goaaats5-1/+57
2018-01-16hid: Write to all layouts, implement circular buffers, set up controller metadata.shinyquagsire232-39/+71
2018-01-16Build: Add unicorn as a submodule and build it if neededJames Rowe1-1/+1
Adds a cmake custom target that will build unicorn on first compile and uses this in the build scripts as well. Updates Appveyor and Travis build scripts to work with the new unicorn build, and updates the paths to all of the different artifacts.
2018-01-16Adding meumart's Citra SDL Joystick support. Citra PR #3116muemart7-191/+524
2018-01-15nso: Load subsdk4 if available.bunnei1-1/+1
2018-01-15pctl: Clang format.bunnei1-1/+1
2018-01-15pctl: GetService should return an IParentalControlService interface.bunnei1-3/+8
2018-01-15applet_oe: Stub SetFocusHandlingMode, GetCurrentFocusState, SetTerminateResult.bunnei1-2/+55
2018-01-15settings: Fix button mappings array to have correct entries.bunnei1-2/+6
2018-01-15Clanggit rebase -i fixesunknown1-10/+2
2018-01-15Clang formatunknown2-4/+10
2018-01-15Change default log level to infounknown1-1/+1
2018-01-15Update the internal resolution settingsunknown3-67/+7
2018-01-15yuzu_cmd: Fix default ini, add screenshot buttonshinyquagsire231-1/+2
2018-01-15hid: Bare-minimum sharedmem inputshinyquagsire232-2/+88
2018-01-15hid: Remove redundant HID prefix on structs/enumsshinyquagsire231-73/+73
2018-01-15configure_input: update w/ Switch buttonsshinyquagsire233-90/+221
2018-01-15settings: Screenshot buttonshinyquagsire231-0/+2
2018-01-15yuzu_cmd: fix default inishinyquagsire231-9/+17
2018-01-15settings: adjust button configs for Switch controllersshinyquagsire231-17/+50
2018-01-15hid: Add sharedmem structsshinyquagsire231-0/+312
2018-01-15vi: Add IManagerDisplayService::CloseDisplay functionbsaleil1-0/+10
2018-01-15renderer_gl: Clear screen to black before rendering framebuffer.bunnei2-5/+8
2018-01-15Games expect 15 for ICommonStateGetter::ReceiveMessage in order to continue executionDavid Marcec1-1/+1
2018-01-15renderer: Render previous frame when no new one is available.bunnei4-17/+22
2018-01-15lm: Fix IPC header for Initialize.bunnei1-1/+1
2018-01-15time: Implement GetStandardUserSystemClock, GetCurrentTime.bunnei6-1/+121
2018-01-15audio: Add files to CMake.bunnei2-1/+4
2018-01-15hid: Remove unused registered_loggers.bunnei1-3/+0
2018-01-15audio: Stub out AudOutU::ListAudioOuts.bunnei5-0/+84
2018-01-15hid: Implement IAppletResource::GetSharedMemoryHandle.bunnei3-14/+68
2018-01-14qt: Update about dialog to show license for GPLv2 only.bunnei1-1/+1
Fixes #6.
2018-01-14shared_memory: Minor fixes and cleanup.bunnei1-6/+6
2018-01-14svc: Implement svcMapSharedMemory.bunnei2-1/+38
2018-01-14kernel: Increase default stack size to 64K.bunnei1-1/+1
2018-01-14Remove Surface Viewer stubJannik Vogel3-13/+0
2018-01-14Implement "About" dialogspycrab6-3/+245
2018-01-14Add missing FileType declarations in GuessFromExtension and GetFileTypeStringThog1-0/+8
2018-01-14yuzu qt copy windows deps renamedJames Rowe1-2/+2
2018-01-14Minor cleanupMerryMage7-18/+18
2018-01-14macOS: Update Info.plistMerryMage1-34/+34
2018-01-13Add new icons and fix up the linux paths for installJames Rowe1-3/+1
2018-01-13Update dynarmic to bc73004MerryMage1-12/+17
bc73004 a64_merge_interpret_blocks: Remove debug output 4e656ed tests/A64: Randomize PSTATE.<NZCV> fd9530b A64: Optimization: Merge interpret blocks 3c9eb04 testenv: Use format constants 324f3fc tests/A64: Unicorn interface fixes 98ecbe7 tests/A64: Fuzz against unicorn b1d38e7 tests/A64: Move TestEnvironment to own header 5218ad9 A64/data_processing_pcrel: bug: ADR{,P} instructions sign extend their immediate b1a8c39 A64/data_processing_addsub: bug: {ADD,SUB}S (extended register) instructions write to ZR when d = 31 64827fb a64_emit_x64: bug: A64CallSupervisor trampled callee-save registers 1bfa04d emit_x64: bug: OP m/r64, imm32 form instructions sign-extend their immediate on x64 edadeea A64 inferface: Use two argument static_assert 9ab1304 A64: Add ExceptionRaised IR instruction 6843eed Update readme 7438d07 A64/translate: Add TranslateSingleInstruction function
2018-01-13Fix build on macOS and linuxMerryMage4-6/+7
2018-01-13arm_unicorn: Log unmapped memory access address.bunnei1-1/+1
2018-01-13config: Default log filter to trace.bunnei3-3/+3
2018-01-13yuzu: Update license text to be consistent across project.bunnei61-61/+61
2018-01-13Remove settings issues in sdl and fix a few files that broke in mingwJames Rowe4-53/+1
2018-01-13Removing unused settings and yuzu rebrandingJames Rowe17-485/+69
2018-01-13Get yuzu sdl to start compilingJames Rowe5-12/+12
2018-01-13Remove gpu debugger and get yuzu qt to compileJames Rowe46-3245/+47
2018-01-13Remove references to PICA and rasterizers in video_coreJames Rowe77-16444/+4
2018-01-13Massive removal of unused modulesJames Rowe120-5227/+21
2018-01-13config: Default CPU core to Unicorn.bunnei3-3/+3
2018-01-13core: Gut out cryptop, since it doesn't compile with C++17.bunnei4-126/+7
2018-01-12configuration: Add cpu_core configuration optionMerryMage8-16/+40
2018-01-12arm_dynarmic: Implement coreMerryMage8-65/+166
2018-01-12core: Include <algorithm> where used.bunnei3-0/+6
2018-01-12renderer_opengl: Fix LOG_TRACE in LoadFBToScreenInfo.bunnei1-1/+1
2018-01-12nv: Fix more broken asserts.bunnei2-3/+3
2018-01-12nvdisp_disp0: Fix broken assert.bunnei1-1/+1
2018-01-12core: Fix recent GCC build breaks.bunnei2-2/+4
2018-01-12svc: Implement GetSystemTick.bunnei2-2/+21
2018-01-11nvdisp_disp0: Call SwapBuffers to render framebuffer.bunnei1-0/+7
2018-01-11renderer_opengl: Support rendering Switch framebuffer.bunnei3-138/+83
2018-01-11render_base: Add a struct describing framebuffer metadata.bunnei1-0/+26
2018-01-11renderer_opengl: Add MortonCopyPixels function for Switch framebuffer.bunnei1-0/+111
2018-01-11renderer_opengl: Update DrawScreens for Switch.bunnei2-23/+11
2018-01-11CMakeLists: Add framebuffer_layout.cpp.bunnei1-0/+1
2018-01-11frontend: Update for undocked Switch screen layout.bunnei8-279/+43
2018-01-11NV: Move the nv device nodes to their own directory and namespace.Subv11-166/+430
2018-01-11VI: Use a Pulse event instead of OneShot for the vblank events.Subv1-1/+1
This prevents missing frames if the vblank fires between the DequeueBuffer and Wait(vsync) calls
2018-01-11vi: Use new CoreTiming::EventTypebunnei1-1/+5
2018-01-11NV: Expose the nvdisp_disp0 device and a weak reference to the nvdrv:a service.Subv6-172/+252
NVFlinger will call into the nvdisp_disp0 device to perform screen flips, bypassing the ioctl interface. We now have the address of the framebuffer to draw, we just need to actually put it on the screen.
2018-01-11NV: Determine what buffer to draw for each layer of each display.Subv2-13/+58
Don't try to draw buffers that the guest application is using, only queued buffers are eligible for drawing. Drawing actual pixels is still not implemented.
2018-01-11NV: Signal all display's vsync event 60 times per second.Subv2-1/+32
2018-01-11NV: Give each display its own vsync event.Subv2-12/+29
2018-01-11NV: Keep track of Displays, Layers and BufferQueues in nvflinger.Subv4-41/+261
2018-01-11IPC: Allow passing arguments to the Interfaces when using PushIpcInterfaceSubv1-3/+3
2018-01-11NV: Implemented (with stubs) the vi:m service and some of its subservices.Subv6-0/+726
The homebrew display test application now properly writes graphics data to the graphics buffer but we still don't have a way to compose the display layers.
2018-01-11NV: Implemented the nvdrv:a service and the /dev/nvmap device.Subv4-0/+354
2018-01-11IPC: Corrected some definitions for the buffer C descriptor flags.Subv3-3/+10
2018-01-11svc: Stub ResetSignal and CreateTransferMemorySubv2-3/+28
2018-01-11svc: Stub SetMemoryAttributeSubv2-0/+11
2018-01-10Threads: Added enum values for the Switch's 4 cpu cores and implemented svcGetInfo(AllowedCpuIdBitmask)Subv5-16/+28
2018-01-10Services: Allow lm to log single-character messages.Subv1-7/+3
2018-01-09SVC: Fixed WaitSynchronization with multiple handles when none is immediately ready.Subv1-7/+18
2018-01-09SVC: Implemented CancelSynchronization.Subv2-1/+19
2018-01-09ErrorCodes: Updated the InvalidHandle and Timeout kernel error codes.Subv1-2/+7
2018-01-09SVC: Fixed WaitSynchronization with multiple handles when at least one of them is ready.Subv2-3/+29
2018-01-09kernel: Rename Semaphore to ConditionVariable.bunnei11-171/+180
2018-01-09mutex: Remove unused call to VerifyGuestState.bunnei1-3/+0
2018-01-09Kernel: Actually wake up the requested number of threads in Semaphore::Release.Subv4-21/+18
Also properly keep track of data in guest memory, this fixes managing the semaphore from userland. It was found that Semaphores are actually Condition Variables, with Release(1) and Release(-1) being equivalent to notify_one and notify_all. We should change the name of the class to reflect this.
2018-01-09Kernel: Properly keep track of mutex lock data in the guest memory. This fixes userland locking/unlocking.Subv4-67/+63
2018-01-09Kernel: Allow chaining WaitSynchronization calls inside a wakeup callback.Subv4-30/+78
2018-01-09fix macos buildMerryMage2-5/+5
2018-01-09core_timing: Use 1.020GHz for core clock rate.bunnei1-5/+3
2018-01-09CoreTiming: Reworked CoreTiming (cherry-picked from Citra #3119)B3n3012-557/+638
* CoreTiming: New CoreTiming; Add Test for CoreTiming
2018-01-07IPC: Make DuplicateSession return the Domain instead of the Session if the request was made on a Domain interface.Subv2-2/+7
2018-01-07AppletOE: Fixed command buffer structure for ReceiveMessage.Subv1-2/+1
2018-01-07IPC: Corrected some command headers in the IPC Controller interface.Subv1-4/+2
2018-01-07IPC: Corrected some command header sizes in appletOE.Subv1-12/+21
2018-01-07IPC: Take the number of domain objects as a parameter in MakeBuilder.Subv2-4/+6
2018-01-07SM: Fixed connecting to services with an 8-byte name, like appletOE.Subv1-12/+4
2018-01-07IPC: Fixed pushing ResultCodes into the command buffer.Subv2-7/+9
They should have 32 bits of padding after the error code now.
2018-01-07IPC: Add functions to read the input move/copy objects from an IPC request.Subv3-2/+42
2018-01-07IPC: Don't attempt to read the command buffer if it holds a Close request.Subv1-0/+5
2018-01-07IPC Cleanup: Remove 3DS-specific code and translate copy, move and domain objects in IPC requests.Subv8-405/+118
Popping objects from the buffer is still not implemented.
2018-01-07IPC: Skip the entire u64 of the command id when receiving an IPC request.Subv2-15/+5
Service code now doesn't have to deal with this.
2018-01-07IPC: Use the correct size when pushing raw data to the command buffer and fixed pushing domain objects.Subv4-10/+29
Domain object ids are always stored immediately after the raw data.
2018-01-07svc: Implement svcSignalProcessWideKey.bunnei2-4/+23
2018-01-07audio: Log dropping frames as trace to reduce spam.bunnei1-1/+1
2018-01-07semaphore: More changes for Switch.bunnei2-11/+17
2018-01-07wait_object: Refactor to allow waking up a single thread.bunnei2-15/+28
2018-01-07nso: Always load the filepath specified by the user.bunnei1-1/+3
2018-01-07core_timing: Increase clock speed for Switch docked.bunnei3-3/+3
2018-01-06svc: Implement svcWaitProcessWideKeyAtomic.bunnei2-1/+54
2018-01-06semaphore: Updates for Switch.bunnei2-21/+31
2018-01-06lm: Assert on unsupported multi-message.bunnei1-0/+9
2018-01-06svc: Implement WaitSynchronization for a single handle.bunnei1-4/+24
2018-01-06svc: Refactor LockMutex code to use WaitSynchronization1.bunnei1-13/+45
2018-01-05lm: Improve Log() to format a useful string.bunnei1-10/+75
2018-01-05svc: Add missing string_util include.bunnei1-0/+1
2018-01-04cmake: Don't compile Dynarmic as it's unused.bunnei1-1/+1
2018-01-04core: Increase tight_loop 100x for speed.bunnei1-1/+1
2018-01-04citra_qt: Remove VFP registers, since this isn't used anyways and caused an assert.bunnei1-4/+0
2018-01-04arm_unicorn: Load/release unicorn DLL.bunnei1-0/+16
2018-01-04externals: Use unicorn DLL instead of static lib.bunnei2-0/+4
2018-01-04unicorn: Use for arm interface on Windows.bunnei4-9/+242
2018-01-04arm_dynarmic: More cleanup.bunnei1-6/+0
2018-01-04core: Remove unicorn_dynload.bunnei1-2/+0
2018-01-04arm_dynarmic: Gut interface until dynarmic is ready for general use.bunnei2-142/+44
2018-01-03arm: Remove SkyEye/Dyncom code that is ARMv6-only.bunnei37-28101/+23
2018-01-03vm_manager: Use a more reasonable MAX_ADDRESS size.bunnei1-5/+4
2018-01-03svc: Remove unnecessary "svc" prefix to naming scheme.bunnei1-106/+106
2018-01-03pctl: Remove duplicate InstallInterfaces function.bunnei1-4/+0
2018-01-03hle: Move SVC code to kernel namespace.bunnei4-134/+121
2018-01-01svc: Improve svcGetInfo.bunnei2-35/+41
2018-01-01vm_manager: Stub out a bunch of interfaces used by svcGetInfo.bunnei2-1/+51
2018-01-01svc: Fix string formatting for CreateThread.bunnei1-1/+1
2018-01-01cmake: Add missing object_address_table.bunnei1-0/+2
2018-01-01core/video_core: Fix a bunch of u64 -> u32 warnings.bunnei8-26/+26
2018-01-01svc: Stub out svcWaitSynchronization.bunnei1-1/+9
- This does not matter until we implement other kernel objects, mutexes use svcLockMutex for waiting.
2018-01-01svc: Implement svcExitProcess.bunnei3-11/+77
2018-01-01svc: Implement svcUnlockMutex.bunnei1-1/+11
2018-01-01svc: Implement svcLockMutex.bunnei3-24/+134
2018-01-01kernel: Add ObjectAddressTable class.bunnei3-2/+101
2017-12-31thread: Keep track of the initially created handle.bunnei3-2/+7
This is kinda crufty, but we need it for now to update guest state variables.
2017-12-31svc: Implement svcExitThread.bunnei1-1/+9
2017-12-31svc: Implement svcCreateThread.bunnei1-2/+57
2017-12-31svc: Cleanup svcGetThreadPriority.bunnei1-3/+5
2017-12-31svc: Stub out svcGetCurrentProcessorNumber.bunnei1-1/+7
2017-12-31errors: Define missing kernel error codes.bunnei1-0/+3
2017-12-31svc: Implement svcSetThreadPriority.bunnei1-1/+30
2017-12-31svc: Change SignalProcessWideKey to a stub.bunnei1-2/+2
2017-12-31function_wrappers: Cleanup, fix warnings, remove unused code.bunnei1-187/+35
2017-12-31svc: Implement svcUnmapMemory.bunnei3-1/+15
2017-12-30svc: Minor cleanups.bunnei1-8/+9
2017-12-30svc: Implement svcStartThread.bunnei1-0/+16
2017-12-30thread: Main thread should set thread handle to reg 1.bunnei1-1/+4
2017-12-30thread: Remove THUMB mode flag.bunnei1-1/+1
2017-12-30thread: Main thread should be ready by default, all others dormant.bunnei1-4/+3
2017-12-29kernel: Various 64-bit fixes in memory/process/threadbunnei5-14/+14
2017-12-29applet_oe: Stub out a bunch of interfaces necessary for boot.bunnei2-1/+159
2017-12-29controller: Implement DuplicateSession.bunnei2-9/+11
2017-12-29kernel: Fix implementation of ConvertSessionToDomain.bunnei10-54/+90
2017-12-29ap, aoc_u: Minor cleanup.bunnei3-4/+1
2017-12-29service: Add empty interface for pctl:a.bunnei6-0/+90
2017-12-29kernel: Add basic support for Domain object.bunnei5-4/+112
2017-12-29kernel: Add SyncObject primitive, use it for ClientSession.bunnei4-10/+41
2017-12-29svc: Implement MapMemory.bunnei3-4/+17
2017-12-29process: Add method to mirror a memory region.bunnei2-0/+27
2017-12-28svc: Implement SetHeapSize.bunnei2-3/+19
2017-12-28service: Clean up apm/lm/applet_oe/controller/sm ctor/dtor.bunnei10-20/+10
2017-12-28service: Halt on ReportUnimplementedFunction and improve output log.bunnei1-4/+2
2017-12-28service: Add empty interface for aoc:u.bunnei4-0/+44
2017-11-01service: Return proper result code for IPC::CommandType::Close.bunnei4-9/+12
2017-11-01hle: Use Switch formatted result codes.bunnei8-346/+110
2017-10-23svc: Implement GetThreadId and GetProcessId.bunnei2-2/+37
2017-10-23logging: Rename category "Core_ARM11" to "Core_ARM".bunnei10-89/+89
2017-10-23nso: Load more common submodules.bunnei1-15/+11
2017-10-23memory: Support 32-bit paging, move heap address space up.bunnei2-3/+3
2017-10-20hle: Fix QueryMemory response for MemoryInfo.bunnei7-149/+31
2017-10-19lm: Implement lm::Initialize and Logger::log.bunnei2-3/+67
2017-10-19hle_ipc: Only copy necessary fields for outgoing command buffer.bunnei1-1/+1
2017-10-19hle_ipc: Parse out buffer X/A/B/B descriptors from incoming command buffer.bunnei2-14/+19
2017-10-19service: Add CreatePort function (that does not register/install).bunnei2-0/+12
2017-10-19memory: Print addresses as 64-bit.bunnei1-2/+2
2017-10-18ipc_helpers: Fix alignment (was wrong as a result of a dynarmic bug).bunnei1-3/+4
2017-10-18service: Print correct command ID on unimplemented function.bunnei1-1/+1
2017-10-15hle: Implement ConvertSessionToDomain, various cleanups.bunnei10-33/+82
2017-10-15core: Refactor MakeMagic usage and remove dead code.bunnei11-885/+18
2017-10-15hle: Add service stubs for apm and appletOE.bunnei10-2/+136
2017-10-15hle: Initial implementation of NX service framework and IPC.bunnei21-859/+574
2017-10-14nso: Add a log for loading submodules.bunnei1-0/+1
2017-10-14svc: Some logging cleanup.bunnei1-7/+5
2017-10-14svc: Update MemoryInfo flags for 64-bit.bunnei1-5/+5
2017-10-14svc: Initial nx impl. for QueryMemory, ConnectToPort, SendSyncRequest, etc.bunnei1-1185/+185
2017-10-13Remove more 3DS-specific code.bunnei5-48/+3
2017-10-13Remove more 3DS-specific code.bunnei7-1414/+2
2017-10-13Remove more 3DS-specific code.bunnei3-55/+0
2017-10-13Remove lots more 3DS-specific code.bunnei50-6976/+8
2017-10-10hle: Remove a large amount of 3ds-specific service code.bunnei200-22393/+2
2017-10-10loader: Various improvements for NSO/NRO loaders.bunnei8-58/+40
2017-10-09Change command header in nwm::UDS Initialize functionDragios1-1/+1
2017-10-06loader: Add support for NRO, as well as various fixes and shared linker.bunnei9-146/+434
2017-10-04SVC: Removed GetPointer usage in the GetResourceLimit functions.Subv1-10/+16
2017-10-04SVC: Remove GetPointer usage in CreatePort.Subv2-6/+4
2017-10-04SVC: Replace GetPointer usage with ReadCString in ConnectToPort.Subv2-20/+9
2017-10-04SVC: Replace GetPointer usage with ReadBlock in OutputDebugString.Subv2-4/+6
2017-10-04SVC: Replace GetPointer usage with Read32 in ReplyAndReceive.Subv2-7/+6
2017-10-04SVC: Replace GetPointer usage with Read32 in WaitSynchronizationN.Subv2-8/+8
2017-10-04Memory: Remove all GetPointer usages from the GDB stub.Subv1-8/+12
2017-10-04Extracted the attribute setup and draw commands into their own functionsHuw Pascoe1-217/+222
2017-10-04nso: Fixes to support homebrew NSOs without a MOD header.bunnei2-17/+23
2017-10-02Kernel/SharedMemory: Don't take over and unmap the source memory block when creating a shared memory, just reference it.Subv1-15/+12
Also reference the right offset into the backing block for the requested address.
2017-10-01Memory: Make WriteBlock take a Process parameter on which to operateSubv2-10/+19
2017-10-01Memory: Make ReadBlock take a Process parameter on which to operateSubv2-12/+30
2017-10-01Kernel/Thread: Added a helper function to get a thread's command buffer VAddr.Subv2-0/+12
2017-10-01file_sys, loader: add support for reading TMDs to determine app pathsshinyquagsire232-5/+27
2017-10-01file_sys: add class for Title Metadata (TMD)shinyquagsire233-0/+338
2017-10-01file_sys/ncch_container: add RomFS, ExeFS override to allow for backward compatibility with existing .romfs system archive dumpsshinyquagsire232-69/+206
2017-10-01file_sys/archive_ncch: use NCCHContainer instead of loading .romfs filesshinyquagsire231-6/+12
2017-09-30arm_interface: Set TLS address for dynarmic core.bunnei5-0/+32
2017-09-30nso: Refactor and allocate .bss section.bunnei9-132/+162
2017-09-30process: Support loading multiple codesets.bunnei2-20/+27
2017-09-30loader: Add support for loading an NSO.bunnei5-0/+342
2017-09-30externals: Add lz4.bunnei1-1/+1
2017-09-30memory: Log with 64-bit values.bunnei1-8/+8
2017-09-30kernel: Various threading fixes to support 64-bit addressing.bunnei2-8/+8
2017-09-30core: Various changes to support 64-bit addressing.bunnei5-54/+54
2017-09-30arm: Use 64-bit addressing in a bunch of places.bunnei9-80/+113
2017-09-30elf: Check if machine is ARM.bunnei1-2/+9
2017-09-30Services/NIM: Implement CheckForSysUpdateEvent.Subv3-2/+29
Implementation verified by reverse engineering. This lets the Home Menu boot without crashing on startup.
2017-09-30Moved down_count to CoreTimingHuw Pascoe9-43/+33
2017-09-30Services/UDS: Handle the rest of the connection sequence. (#2963)B3n303-19/+250
Services/UDS: Handle the rest of the connection sequence.
2017-09-30Fixed type conversion ambiguityHuw Pascoe32-91/+97
2017-09-28Kernel/Threads: When putting a thread to wait, specify a function to execute when it is awoken.Subv4-17/+91
This change makes for a clearer (less confusing) path of execution in the scheduler, now the code to execute when a thread awakes is closer to the code that puts the thread to sleep (WaitSynch1, WaitSynchN). It also allows us to implement the special wake up behavior of ReplyAndReceive without hacking up WaitObject::WakeupAllWaitingThreads. If savestates are desired in the future, we can change this implementation to one similar to the CoreTiming event system, where we first register the callback functions at startup and assign their identifiers to the Thread callback variable instead of directly assigning a lambda to the wake up callback variable.
2017-09-27Disable unary operator- on Math::Vec2/Vec3/Vec4 for unsigned types.Subv2-5/+9
It is unlikely we will ever use this without first doing a Cast to a signed type. Fixes 9 "unary minus operator applied to unsigned type, result still unsigned" warnings on MSVC2017.3
2017-09-27Loaders: Don't automatically set the current process every time we load an application.Subv8-37/+40
The loaders will now just create a Kernel::Process, construct it and return it to the caller, which is responsible for setting it as the current process and configuring the global page table.
2017-09-27Kernel/Thread: Allow specifying which process a thread belongs to when creating it.Subv4-17/+22
Don't automatically assume that Thread::Create will only be called when the parent process is currently scheduled. This assumption will be broken when applets or system modules are loaded.
2017-09-27Tests: Added Memory::IsValidVirtualAddress tests.Subv2-0/+57
2017-09-27Tests: Fixed ARM VFP testsSubv1-9/+13
2017-09-27Memory: Allow IsValidVirtualAddress to be called with a specific process parameter.Subv2-7/+25
There is still an overload of IsValidVirtualAddress that only takes the VAddr and will default to the current process.
2017-09-26HLE/APT: Always set up the APT parameter when starting a library applet.Subv2-30/+47
Only use the HLE interface if an HLE applet with the desired id was started. This commit reorganizes the APT code surrounding parameter creation and delivery to make it easier to support LLE applets in the future. As future work, the HLE applet interface can be reworked to utilize the same facilities as the LLE interface.
2017-09-26Memory/RasterizerCache: Ignore unmapped memory regions when caching physical regions.Subv1-1/+16
Not all physical regions need to be mapped into the address space of every process, for example, system modules do not have a VRAM mapping. This fixes a crash when loading applets and system modules.
2017-09-26Audio: Use std::deque instead of std::vector for the audio buffer type (StereoBuffer16).Subv5-7/+9
The current code inserts and deletes elements from the beginning of the audio buffer, which is very inefficient in an std::vector. Profiling was done using VisualStudio2017's Performance Analyzer in Super Mario 3D Land. Before this change: AudioInterp::Linear had 14.14% of the runtime (inclusive) and most of that time was spent in std::vector's insert implementation. After this change: AudioInterp::Linear has 0.36% of the runtime (inclusive)
2017-09-25HLE/Archives: Allow multiple loaded applications to access their SelfNCCH archive independently.Subv6-18/+65
The loaders now register each loaded ROM with the SelfNCCH factory, which keeps the data around for the duration of the emulation session. When opening the SelfNCCH archive, the factory queries the current program's programid and uses that as a key to the map that contains the NCCHData structure (RomFS, Icon, Banner, etc). 3dsx files do not have a programid and will use a default of 0 for this value, thus, only 1 3dsx file with RomFS is loadable at the same time.
2017-09-25Loader/NCCH: Add support for loading application updates (#2927)Max Thomas8-439/+670
* loader/ncch: split NCCH parsing into its own file * loader/ncch: add support for loading update NCCHs from the SD card * loader/ncch: fix formatting * file_sys/ncch_container: Return a value for OpenFile * loader/ncch: cleanup, always instantiate overlay_ncch to base_ncch * file_sys/ncch_container: better encryption checks, allow non-app NCCHs to load properly and for the existence of NCCH structures to be checked * file_sys/ncch_container: pass filepath as a const reference
2017-09-25Services/UDS: Added a function to send EAPoL-Start packets (#2920)B3n305-88/+250
* Services/UDS: Added a function to generate the EAPoL-Start packet body. * Services/UDS: Added filter for beacons. * Services/UDS: Lock a mutex when accessing connection_status from both the emulation and network thread. * Services/UDS: Handle the Association Response frame and respond with the EAPoL-Start frame. * fixup: make use of current_node, changed received_beacons into a list, mutex and assert corrections * fixup: fix damn clang-format
2017-09-25Optimized Float<M,E> multiplicationHuw Pascoe1-11/+7
Before: ucomiss xmm1, xmm1 jp .L9 pxor xmm2, xmm2 mov edx, 1 ucomiss xmm0, xmm2 setp al cmovne eax, edx test al, al jne .L9 .L3: movaps xmm0, xmm2 ret .L9: ucomiss xmm0, xmm0 jp .L10 pxor xmm2, xmm2 mov edx, 1 ucomiss xmm1, xmm2 setp al cmovne eax, edx test al, al je .L3 After: movaps xmm2, xmm1 mulss xmm2, xmm0 ucomiss xmm2, xmm2 jnp .L3 ucomiss xmm1, xmm0 jnp .L11 .L3: movaps xmm0, xmm2 ret .L11: pxor xmm2, xmm2 jmp .L3
2017-09-25ARM_Interface: Implement PageTableChangedMerryMage6-6/+39
2017-09-24memory: Remove GetCurrentPageTablePointersMerryMage2-10/+0
2017-09-24memory: Add GetCurrentPageTable/SetCurrentPageTableMerryMage7-13/+19
Don't expose Memory::current_page_table as a global.
2017-09-24Optimized MortonHuw Pascoe1-10/+4
2017-09-24citra-qt: fix some untranslated stringswwylele3-21/+22
2017-09-24HLE/APT: Always return an error from PrepareToStartNewestHomeMenu so that the Home Menu doesn't try to reboot the system.Subv3-2/+26
As per 3dbrew: "During Home Menu start-up it uses APT:PrepareToStartNewestHomeMenu. If that doesn't return an error(normally NS returns 0xC8A0CFFC for that), Home Menu starts a hardware reboot with APT:StartNewestHomeMenu etc. "
2017-09-24HLE/APT: Prepare the APT Wakeup parameter when the game calls InitializeSubv1-6/+19
We need to know what is being run so we can set the APT parameter destination AppId correctly. Delaying the preparation of the parameter until we know which AppId is running lets us support booting both the Home Menu and normal game Applications.
2017-09-24HLE/SRV: Implemented RegisterService.Subv4-1/+33
Now system modules can do more than just crash immediately on startup.
2017-09-23Remove pipeline.gpu_mode and fix minor issuesJames Rowe1-12/+2
2017-09-19WebService: Verify username and token (#2930)B3n3015-38/+316
* WebService: Verify username and token; Log errors in PostJson * Fixup: added docstrings to the functions * Webservice: Added Icons to the verification, imrpved error detection in cpr, fixup nits * fixup: fmt warning
2017-09-17Improved performance of FromAttributeBufferHuw Pascoe1-1/+2
Ternary operator is optimized by the compiler whereas std::min() is meant to return a value. I've noticed a 5%-10% emulation speed increase.
2017-09-17Fixed framebuffer warningHuw Pascoe1-7/+18
2017-09-16Services/NS: Port ns:s to the new service framework.Subv7-42/+77
2017-09-15CPU/Dynarmic: Disable the fast page-table access in dynarmic until it supports switching page tables at runtime.Subv1-1/+3
2017-09-15Tests/VFP: Use a standalone pagetable for the TestEnvironment memory operations.Subv1-4/+14
This fixes building the tests
2017-09-15Kernel/Memory: Make IsValidPhysicalAddress not go through the current process' virtual memory mapping.Subv1-2/+1
2017-09-15Kernel/Threads: Don't clear the CPU instruction cache when performing a context switch from an idle thread into a thread in the same process.Subv1-1/+3
We were unnecessarily clearing the cache when going from Process A -> Idle -> Process A, this caused extreme performance regressions.
2017-09-15Kernel/Memory: Changed GetPhysicalPointer so that it doesn't go through the current process' page table to obtain a pointer.Subv4-30/+69
2017-09-11GPU: Add draw for immediate and batch modesJames Rowe1-2/+17
PR #1461 introduced a regression where some games would change configuration even while in the poorly named "drawing" mode, which broke the heuristic citra was using to determine when to draw the batch. This change adds back in a draw call for batching, and also adds in a draw call in immediate mode each time it adds a triangle.
2017-09-10Kernel/Memory: Switch the current page table when a new process is scheduled.Subv1-0/+10
2017-09-10Kernel/Memory: Give each Process its own page table.Subv9-87/+93
The loader is in charge of setting the newly created process's page table as the main one during the loading process.
2017-09-04Remove _flag in var namesmailwl1-6/+6
2017-09-04Mii Selector Applet: update Mii structuresmailwl2-34/+29
2017-09-03Fix icon for citra qtJames Rowe1-1/+3
2017-09-03APT: load different shared font depending on the regionwwylele3-135/+155
2017-09-03pica/lighting: only apply Fresnel factor for the last lightwwylele2-7/+9
2017-09-03Add manifestDaMan2-0/+16
2017-08-31video_core: report telemetry for gas modewwylele1-0/+6
2017-08-29Use recursive_mutex instead of mutex to fix #2902danzel4-5/+5
2017-08-28interpolate: Interpolate on a frame-by-frame basisMerryMage3-88/+74
2017-08-27Services/UDS: Remove an old duplicated declaration of WifiPacket.Subv2-22/+0
2017-08-27Services/UDS: Handle the connection sequence packets.Subv1-17/+83
There is currently no stage tracking, a client is considered "Connected" when it receives the EAPoL Logoff packet from the server, this is not yet implemented.
2017-08-27Services/UDS: Store the received beacon frames until RecvBeaconBroadcastData is called, up to 15 beacons at the same time, removing any older beacon frames when the limit is exceeded.Subv1-3/+62
2017-08-27Services/UDS: Add functions to generate 802.11 auth and assoc response frames.Subv5-11/+144
2017-08-27web_backend: Fix CPR bug where Winsock is not properly initializing.bunnei1-15/+27
2017-08-26Warnings: Fixed a few missing-return warnings in video_core.Subv3-6/+10
2017-08-26web_backend: Fix asynchronous JSON post by spawning new thread.bunnei1-9/+18
2017-08-26web_services: Refactor to remove dependency on Core.bunnei5-20/+35
2017-08-26qt: Add an option to view/regenerate telemetry ID.bunnei4-7/+40
2017-08-26default_ini: Use correct telemetry endpoint URL.bunnei1-1/+1
2017-08-26# This is a combination of 2 commits.bunnei1-3/+30
# This is the 1st commit message: qt: Add web configuration tab. # The commit message #2 will be skipped: # fixup! qt: Add web configuration tab.
2017-08-26qt: Add web configuration tab.bunnei6-2/+217
2017-08-26web_backend: User config for username and token, support anonymous post.bunnei2-40/+17
2017-08-26telemetry: Log frontend type.bunnei2-0/+4
2017-08-26settings: Add enable_telemetry, citra_username, and citra_token.bunnei4-0/+20
2017-08-26telemetry_session: Log telemetry ID.bunnei1-0/+36
2017-08-26citra_qt: Show one-time callout messages to user.bunnei4-0/+50
2017-08-25SidebySide Layout (#2859)ThaMighty906-7/+61
* added a SidebySide Layout * Reworked, so both screen have the same height and cleaned up screen translates. * added the option in the UI, hope this is the right way to do it. formated framebuffer_layout.cpp * delete the x64 files * deleted ui_configure_graphics.h * added Option for the Layout in the xml * got rid of SIDE_BY_SIDE_ASPECT_RATIO because it was useless. pulled translate into variables * changed shift variables to u32 and moved them in their respective branch. remove notr="true" for the Screen layout drop down * reworked intends :). changed function description for SideFrameLayout * some description reworking
2017-08-25SwRasterizer/Clipper: flip the sign convention to match PICA and OpenGLwwylele1-9/+9
2017-08-25gl_rasterizer: implement custom clip planewwylele3-34/+83
2017-08-24SwRasterizer: implement custom clip planewwylele2-4/+25
2017-08-24EmuWindow: refactor touch input into a TouchDevicewwylele5-39/+72
2017-08-24HID: use TouchDevice for touch padwwylele3-4/+15
2017-08-22Kernel/Memory: Acquire the global HLE lock when a memory read/write operation falls outside of the fast path, for it might perform an MMIO operation.Subv1-1/+8
2017-08-22Kernel/HLE: Use a mutex to synchronize access to the HLE kernel state between the cpu thread and any other possible threads that might touch the kernel (network thread, etc).Subv5-3/+38
This mutex is acquired in SVC::CallSVC, ie, as soon as the guest application enters the HLE kernel, and should be acquired by the aforementioned threads before modifying kernel structures.
2017-08-22motion_emu: fix initialization orderwwylele1-1/+4
2017-08-22gl_rasterizer/lighting: more accurate CP formulawwylele1-2/+2
2017-08-22SwRasterizer/Lighting: implement LUT input CPwwylele1-0/+11
2017-08-22SwRasterizer/Lighting: implement bump mappingwwylele3-8/+27
2017-08-22Kernel/Threads: Don't immediately switch to the new main thread when loading a new process.Subv1-5/+1
This is necessary for loading multiple processes at the same time. The main thread will be automatically scheduled when necessary once the scheduler runs.
2017-08-21GPU/Warnings: Explicitly cast the screen refresh ticks to u64.Subv1-1/+1
2017-08-21Warnings: Add UNREACHABLE macros to switches that contemplate all possible values.Subv3-2/+7
2017-08-21HLE/Applets: Fixed some conversion warnings when creating the framebuffer shared memory objects.Subv4-8/+8
2017-08-21CPU/Dynarmic: Fixed a warning when incrementing the number of ticks in ExecuteInstructions.Subv1-1/+1
2017-08-21Dyncom: Use size_t instead of int to store the instruction offsets in the instruction cache.Subv2-4/+4
Fixes a few warnings.
2017-08-21Dyncom: Fixed a conversion warning when decoding thumb instructions.Subv1-1/+1
2017-08-21swrasterizer: remove invalid TODOwwylele1-4/+2
This function is called in clipping, before the pespective divide, and is not used in later rasterization. Thus it doesn't need perspective correction.
2017-08-21swrasterizer/clipper: remove tested TODOwwylele1-4/+0
hwtested. Current implementation is the correct behavior
2017-08-21gl_shader_gen: simplify and clarify the depth transformation between vertex shader and fragment shaderwwylele1-2/+5
2017-08-21gl_rasterizer: add clipping plane z<=0 defined in PICAwwylele4-0/+21
2017-08-20HID: fix a comment and a warningwwylele1-2/+2
2017-08-19Added missing parts in libnetwork (#2838)B3n309-37/+310
* Network: Set and send the game information over enet Added Callbacks for RoomMember and GetMemberList to Room in preparation for web_services.
2017-08-19pica/command_processor: build geometry pipeline and run geometry shaderwwylele6-28/+383
The geometry pipeline manages data transfer between VS, GS and primitive assembler. It has known four modes: - no GS mode: sends VS output directly to the primitive assembler (what citra currently does) - GS mode 0: sends VS output to GS input registers, and sends GS output to primitive assembler - GS mode 1: sends VS output to GS uniform registers, and sends GS output to primitive assembler. It also takes an index from the index buffer at the beginning of each primitive for determine the primitive size. - GS mode 2: similar to mode 1, but doesn't take the index and uses a fixed primitive size. hwtest shows that immediate mode also supports GS (at least for mode 0), so the geometry pipeline gets refactored into its own class for supporting both drawing mode. In the immediate mode, some games don't set the pipeline registers to a valid value until the first attribute input, so a geometry pipeline reset flag is set in `pipeline.vs_default_attributes_setup.index` trigger, and the actual pipeline reconfigure is triggered in the first attribute input. In the normal drawing mode with index buffer, the vertex cache is a little bit modified to support the geometry pipeline. Instead of OutputVertex, it now holds AttributeBuffer, which is the input to the geometry pipeline. The AttributeBuffer->OutputVertex conversion is done inside the pipeline vertex handler. The actual hardware vertex cache is believed to be implemented in a similar way (because this is the only way that makes sense). Both geometry pipeline and GS unit rely on states preservation across drawing call, so they are put into the global state. In the future, the other three vertex shader units should be also placed in the global state, and a scheduler should be implemented on top of the four units. Note that the current gs_unit already allows running VS on it in the future.
2017-08-19pica/shader/jit: implement SETEMIT and EMITwwylele2-2/+49
2017-08-19pica/primitive_assembly: Handle winding for GS primitivewwylele2-3/+19
hwtest shows that, although GS always emit a group of three vertices as one primitive, it still respects to the topology type, as if the three vertices are input into the primitive assembler independently and sequentially. It is also shown that the winding flag in SETEMIT only takes effect for Shader topology type, which is believed to be the actual difference between List and Shader (hence removed the TODO). However, only Shader topology type is observed in official games when GS is in use, so the other mode seems to be just unintended usage.
2017-08-19correct constnesswwylele2-2/+4
2017-08-19pica/shader/interpreter: implement SETEMIT and EMITwwylele1-0/+16
2017-08-19pica/shader: extend UnitState for GSwwylele2-0/+84
Among four shader units in pica, a special unit can be configured to run both VS and GS program. GSUnitState represents this unit, which extends UnitState (which represents the other three normal units) with extra state for primitive emitting. It uses lots of raw pointers to represent internal structure in order to keep it standard layout type for JIT to access. This unit doesn't handle triangle winding (inverting) itself; instead, it calls a WindingSetter handler. This will be explained in the following commits
2017-08-19motion_emu: no need to include thread in headerwwylele2-2/+7
2017-08-15dsp_dsp: Remove size assertion in LoadComponentMerryMage1-3/+4
2017-08-13Fix Spelling/English mistakesDave Leaver1-1/+1
2017-08-11gl_shader_gen: don't call SampleTexture when bump map is not usedwwylele1-4/+5
2017-08-11move MotionEmu from core/frontend to input_common as a InputDevicewwylele17-244/+221
2017-08-11HID: use MotionDevice for Accelerometer and Gyroscopewwylele3-5/+48
2017-08-11Fix some spelling mistakesdanzel2-4/+4
2017-08-11SwRasterizer/Lighting: implement spot lightwwylele1-3/+19
2017-08-11SwRasterizer/Lighting: implement geometric factorwwylele1-4/+16
2017-08-10HID: zero unused PadState bitswwylele2-2/+2
2017-08-10SwRasterizer/Lighting: use make_tuple instead of constructorwwylele1-1/+1
implicit tuple constructor is a c++17 thing, which is not supported by some not-so-old libraries. Play safe for now
2017-08-10pica/regs: layout geometry shader configuration regswwylele2-2/+39
All the register meanings are derived from ctrulib (3dbrew is outdated for most of them)
2017-08-09Service/dlp: Update function tables according 3dbrewmailwl3-4/+44
2017-08-08Update cryptoppJames1-1/+1
2017-08-07Services/APT: Use the AppletAttributes union directly when dealing with applet attrs.Subv1-19/+15
2017-08-07Services/APT: Use an array to hold data about the 4 possible concurrent applet types (Application, Library, HomeMenu, System).Subv2-35/+204
This gives each applet type its own set of events as per the real NS module.
2017-08-07pica: upload shared shader code to both unitwwylele2-26/+45
2017-08-05Quickfix typo in OpenGL 3.3 error messageAndrea Pascal1-1/+1
User pointed out on the Discord server that "nothave" is erroneously concatenated. Added a space to prevent it.
2017-08-04telemetry: Add field for OsPlatform.bunnei1-0/+9
2017-08-04telemetry: Add field for BuildName.bunnei1-0/+1
2017-08-04telemetry: Add field for RequiresSharedFont.bunnei1-0/+4
2017-08-04telemetry_session: Log BuildDate and ProgramName fields.bunnei1-0/+7
2017-08-04common: Add build timestamp to scm_rev.bunnei2-0/+3
2017-08-04core: Expose AppLoader as a public interface.bunnei1-4/+5
2017-08-04loader: Expose program title.bunnei3-12/+31
2017-08-03SwRasterizer/Lighting: shorten file namewwylele4-4/+4
2017-08-02SwRasterizer/Lighting: move to its own filewwylele4-240/+271
2017-08-02SwRasterizer/Lighting: reduce confusionwwylele1-1/+1
2017-08-02SwRasterizer/Lighting: move quaternion normalization to the callerwwylele1-3/+3
2017-07-31Handle invalid filenames when renaming files/directoriesJames2-4/+78
2017-07-27pica/shader_interpreter: fix off-by-one in LOOPwwylele1-1/+1
2017-07-26Network: Moved NintendoOUI initalization to RoomMember constructorB3n302-3/+4
2017-07-23tests: Add tests for vaddMerryMage5-2/+13510
2017-07-23tests: Arm testing frameworkMerryMage3-0/+208
2017-07-21Service/APT: Log Send/Cancel/Receive/GlanceParameter calls even if they return an error.Subv1-7/+9
2017-07-21Services/APT: Return the proper error code when calling SendParameter with an outstanding parameter already in memory.Subv2-4/+17
2017-07-21Services/APT: Reset the APT parameter inside CancelParameter if the conditions are met.Subv1-6/+23
2017-07-21Services/APT: Properly clear the apt parameter after a successful ReceiveParameter call.Subv1-2/+8
2017-07-21Services/APT: Use the right error codes in ReceiveParameter and GlanceParameter when the parameter doesn't exist.Subv1-0/+28
2017-07-21Services/APT: Use boost::optional for the APT parameter structure.Subv1-20/+26
2017-07-20debugger/shader: display LOOPwwylele1-1/+3
2017-07-20debugger/shader: print the invert flag for JMPUwwylele1-0/+4
2017-07-20debugger/shader: fix address register for reverted arithmetic opwwylele1-20/+9
2017-07-20debugger/shader: fix inverted uniform flow controlwwylele1-2/+2
2017-07-18telemetry: Log performance, configuration, and system data.bunnei5-18/+96
2017-07-17stubbed frd::UnscrambleLocalFriendCode (#2827)B3n303-1/+57
2017-07-16Network: Changed timeout for receiving packets to 100msB3n305-43/+50
2017-07-16Network: Propagate Room closing to connected membersB3n303-3/+28
2017-07-16Network: Made send async in RoomMemberB3n304-25/+70
2017-07-16Network: Send the game titleB3n306-114/+185
2017-07-16Network: Enable sending and receiving chat messagesB3n303-0/+79
2017-07-16Network: Handle the disconnect of a clientB3n301-1/+18
2017-07-16Network: Enable to send WifiPacketsB3n303-1/+82
2017-07-16Network: Init Network in SDL and QTB3n302-1/+5
2017-07-16Network: Send JoinRequest and handle the answer in RoomMemberB3n302-2/+125
2017-07-16Network: Handle join request in RoomB3n302-1/+205
2017-07-16Network: Added Packet class for serializationB3n303-0/+423
2017-07-16Network: Threads for Room and RoomMemberB3n304-13/+119
2017-07-12web_backend: Specify api-version on JSON post.bunnei1-1/+3
2017-07-12web_service: Add CMake flag to enable.bunnei3-4/+15
2017-07-12telemetry_session: Use TelemetryJson to submit real telemetry.bunnei3-5/+3
2017-07-12web_service: Implement JSON serialization of telemetry data.bunnei2-0/+125
2017-07-12web_backend: Add initial interface to POST data to Citra Web Services.bunnei2-0/+63
2017-07-11SwRasterizer/Lighting: dist atten lut input need to be clampwwylele1-1/+1
2017-07-11SwRasterizer/Lighting: unify float suffixwwylele1-11/+13
2017-07-11SwRasterizer/Lighting: get rid of nested returnwwylele1-10/+11
2017-07-11SwRasterizer/Lighting: refactor GetLutValue into a function.wwylele1-83/+27
merging similar pattern. Also makes the code more similar to the gl one
2017-07-11SwRasterizer: only interpolate quat and view when lighting is enabledwwylele1-14/+14
2017-07-11vector_math: remove dead template parameterwwylele1-1/+1
2017-07-11SwRasterizer/Lighting: pass lighting state as parameterwwylele1-13/+13
2017-07-11vector_math: remove broken SFINAE stuffwwylele1-3/+2
this was originally added to eliminate warnings on MSVC, but it doesn't work for custom types.
2017-07-11SwRasterizer/Lighting: Move the clamp highlight calculation to the end of the per-light loop body.Subv1-17/+17
2017-07-11SwRasterizer/Lighting: Move the lighting enable check outside the ComputeFragmentsColors function.Subv1-7/+6
2017-07-11SwRasterizer/Lighting: Do not use global registers state in ComputeFragmentsColors.Subv1-3/+3
2017-07-11SwRasterizer/Lighting: Do not use global state in LookupLightingLut.Subv2-13/+22
2017-07-11SwRasterizer/Lighting: Fixed a bug where the distance attenuation bias was being set to the dist atten scale.Subv1-3/+2
2017-07-11SwRasterizer: Fixed a few conversion warnings and moved per-light values into the per-light loop.Subv1-5/+6
2017-07-11SwRasterizer: Run clang-formatSubv1-45/+83
2017-07-11SwRasterizer: Flip the vertex quaternions before clipping (if necessary).Subv3-21/+16
2017-07-11SwRasterizer: Corrected the light LUT lookups.Subv1-6/+7
2017-07-11SwRasterizer: Corrected the light LUT lookups.Subv2-33/+48
2017-07-11SwRasterizer: Fixed the lighting lut lookup function.Subv1-2/+4
2017-07-11SwRasterizer: Calculate fresnel for fragment lighting.Subv1-1/+25
2017-07-11SwRasterizer: Calculate specular_1 for fragment lighting.Subv1-3/+59
2017-07-11SwRasterizer: Calculate specular_0 for fragment lighting.Subv1-13/+94
2017-07-11SwRasterizer: Implement primary fragment color.Subv1-4/+113
2017-07-10web_service: Add skeleton project.bunnei7-1/+52
2017-07-10settings: Add telemetry endpoint URL.bunnei4-0/+23
2017-07-10logging: Add WebService as a log cateogry.bunnei2-1/+3
2017-07-07Implement basic virtual Room support based on enet (#2803)B3n3012-1/+357
* Added support for network with ENet lib, connecting is possible, but data can't be sent, yet. * fixup! Added support for network with ENet lib, * fixup! CLang * fixup! Added support for network with ENet lib, * fixup! Added support for network with ENet lib, * fixup! Clang format * More fixups! * Moved ENetHost* and ENetPeer* into pimpl classes * fixup! Moved ENetHost* and ENetPeer* into pimpl classes * fixup! Clang again * fixup! Moved ENetHost* and ENetPeer* into pimpl classes * fixup! Moved ENetHost* and ENetPeer* into pimpl classes * fixup! Moved ENetHost* and ENetPeer* into pimpl classes
2017-07-01Service/boss:P: Add some functions to FunctionTablemailwl1-0/+3
2017-07-01gl_rasterizer: use texture buffer for proctex LUTwwylele5-70/+80
2017-06-30Remove unnecessary WIN32_LEAN_AND_MEAN macro definitionKloen1-1/+0
2017-06-29Kernel/SVC: Pass the current thread as a parameter to ClientSession::SendSyncRequest.Subv3-4/+7
2017-06-29gpu: add comments for TextureCopywwylele2-8/+8
2017-06-28configure_debug: Add label warning that CPU JIT needs to be disabled for gdbstub to workMerryMage1-0/+7
2017-06-27gpu: fix edge cases for TextureCopywwylele1-18/+23
2017-06-26UDS: Use the ToDS and FromDS fields to properly calculate the AAD used during encryption.Subv1-15/+32
2017-06-26UDS: Move the UDS keyslot used to generate the CCMP key to the AES::KeySlotID enum.Subv2-4/+3
2017-06-26UDS: Run clang-format.Subv3-51/+55
2017-06-26UDS: Added functions to encrypt and decrypt the data frames.Subv3-12/+156
The responsibility of encryption and encapsulation into an 802.11 MAC frame will fall into the callers of GenerateDataPayload.
2017-06-26Kernel/Sessions: Clean up the list of pending request threads of a session when the client endpoint is closed.Subv1-0/+5
2017-06-26Kernel/SVC: Partially implemented svcReplyAndReceive.Subv2-11/+121
It behaves mostly as WaitSynchronizationN with wait_all = false, except for IPC buffer translation. The target thread of an IPC response will now wake up when responding. IPC buffer translation is currently not implemented. Error passing back to svcSendSyncRequest is currently not implemented.
2017-06-26apt: load shared font from system archivewwylele4-20/+260
2017-06-25apt/shared_font: don't relocate zero offsetwwylele1-2/+4
2017-06-25Kernel/ServerSession: Keep track of which threads have issued sync requests.Subv3-9/+29
2017-06-25Set global definition WIN32_LEAN_AND_MEAN (#2807)B3n301-0/+3
Set definition WIN32_LEAN_AND_MEAN to avoid windows.h including a lot of libs that are usually not used.
2017-06-24citra-qt: Add option to configure the UI themeKloen2-0/+37
2017-06-24citra-qt: load ui theme at startup and config change.Kloen2-0/+22
2017-06-24citra-qt: Add Dark theme from https://github.com/ColinDuquesnoy/QDarkStyleSheetKloen1-2/+5
2017-06-24citra-qt: add new uisetting->themeKloen2-0/+9
2017-06-23Kernel: Implement AcceptSession SVCYuri Kunde Schlesner4-3/+38
2017-06-23Kernel: Fix SVC wrapper for CreatePortYuri Kunde Schlesner1-3/+2
The return parameters were flipped.
2017-06-23Kernel: Implement CreateSessionToPort SVCYuri Kunde Schlesner1-1/+12
2017-06-22gl_rasterizer: use texture buffer for fog LUTwwylele7-29/+32
2017-06-22gl_rasterizer: create the texture before applying the statewwylele1-2/+2
this is a rebasing error from #2792. It doesn't affect much though, because the later more Apply() call fixes/hides it
2017-06-22Kernel: Fix typo in test nameYuri Kunde Schlesner1-1/+1
2017-06-22Kernel: Implement CreateSession SVCYuri Kunde Schlesner2-3/+26
2017-06-22Memory: Add function to flush a virtual range from the rasterizer cacheYuri Kunde Schlesner4-47/+72
This is slightly more ergonomic to use, correctly handles virtual regions which are disjoint in physical addressing space, and checks only regions which can be cached by the rasterizer.
2017-06-22Memory: Fix crash when unmapping a VMA covering cached surfacesYuri Kunde Schlesner1-5/+20
Unmapping pages tries to flush any cached GPU surfaces touching that region. When a cached page is invalidated, GetPointerFromVMA() is used to restore the original pagetable pointer. However, since that VMA has already been deleted, this hits an UNREACHABLE case in that function. Now when this happens, just set the page type to Unmapped and continue, which arrives at the correct end result.
2017-06-22Memory: Add TryVirtualToPhysicalAddress, returning a boost::optionalYuri Kunde Schlesner2-7/+23
2017-06-22Memory: Make PhysicalToVirtualAddress return a boost::optionalYuri Kunde Schlesner4-14/+18
And fix a few places in the code to take advantage of that.
2017-06-21Kernel/IPC: Support translation of null handlesYuri Kunde Schlesner2-7/+35
Missed this in my first implementation. Thanks to @wwylele for pointing out that this was missing.
2017-06-21gl_state: reset 1d textureswwylele1-0/+14
2017-06-21gl_rasterizer: fix glGetUniformLocation typewwylele1-8/+8
2017-06-21gl_rasterizer: manage texture ids in one placewwylele3-31/+55
2017-06-21gl_rasterizer/lighting: fix LUT interpolationwwylele7-116/+102
2017-06-21Changing default values for bg_red, bg_green, and bg_blue from 1.0 to 0.0.chris0626892-6/+6
2017-06-21Memory: Add enum definitions for the n3DS FCRAM sizeYuri Kunde Schlesner1-1/+3
2017-06-19ResultVal: Remove MoveFrom()Yuri Kunde Schlesner24-57/+53
Replace it with std::move(result_val).Unwrap(), or Foo().Unwrap() in case you already have an rvalue.
2017-06-19ResultVal: Add an rvalue overload of Unwrap()Yuri Kunde Schlesner1-1/+6
2017-06-19Kernel: Add comment about the extended linear heap areaYuri Kunde Schlesner1-0/+2
2017-06-19Kernel/IPC: Add tests for HLERequestContext buffer translationYuri Kunde Schlesner2-2/+196
2017-06-19Kernel/IPC: Make HLERequestContext usable from outside kernelYuri Kunde Schlesner3-5/+10
2017-06-18gl_rasterizer/lighting: use the formula from the paper for germetic factorwwylele1-8/+8
2017-06-17Stop using reserved operator names (and/or/xor) with XbyakYuri Kunde Schlesner1-13/+13
Also has the Dynarmic upgrade with the same change
2017-06-15UDS: Clarify comment about the first 4 bytes of the SecureData header.Subv2-1/+5
It is likely that these 4 bytes are actually a different header, part of some protocol that encapsulates the SecureData protocol.
2017-06-15UDS: Return the correct error messages in SendTo when not connected to a network or trying to send to itself.Subv1-6/+13
2017-06-15UDS: Stub SendTo to generate the unencrypted data frame with the right headers.Subv4-1/+261
2017-06-15UDS: Added a hook for updating the connection status when a client connects to the network.Subv1-0/+36
2017-06-15gl_rasterizer/lighting: implement geometric factorwwylele3-1/+20
2017-06-13Services/UDS: Set the proper bit in the ConnectionStatus structure when creating a network. (#2738)Sebastian Valle3-5/+15
* Services/UDS: Set the proper bit in the ConnectionStatus structure when creating a network. This lets the application know that the host was successfully added to the session. * Services/UDS: Reset the connection status when destroying the network * Services/UDS: Reset the connection status's bitmask of changed nodes after reporting it to the game.
2017-06-12Kernel/IPC: Use boost::small_vector for HLE context objectsYuri Kunde Schlesner1-1/+3
2017-06-11Kernel: Allow clearing request_objects to re-use buffer spaceYuri Kunde Schlesner3-0/+14
Reduces the necessary allocation to max(in_handles, out_handles) rather than (in_handles + out_handles).
2017-06-11Kernel: Basic support for IPC translation for HLE servicesYuri Kunde Schlesner3-18/+130
2017-06-11Service/sm: Convert srv: to use IPC helpersYuri Kunde Schlesner1-49/+56
2017-06-11IPC: Add Pop/PushObjects methods to RequestParser/BuilderYuri Kunde Schlesner1-10/+103
These use the context functions to create and look-up handles for the user.
2017-06-11IPC: Add basic HLERequestContext support to RequestParser/BuilderYuri Kunde Schlesner1-1/+32
2017-06-11Kernel: Add methods in HLERequestContext abstracting handle creationYuri Kunde Schlesner2-0/+12
2017-06-11ServiceFramework: Use separate copy of command bufferYuri Kunde Schlesner3-9/+29
Copy the IPC command buffer to/from the request context before/after the handler is invoked. This is part of a move away from using global data for handling IPC requests.
2017-06-11gl_rasterizer/lighting: Implement tangent mappingwwylele1-7/+12
2017-06-11gl_rasterizer/lighting: implement lut input 5 (CP)wwylele2-3/+26
2017-06-10gl_rasterizer_cache: depth write is disabled if allow_depth_stencil_write is falsewwylele1-4/+5
2017-06-10OpenGL: Update comment on AreQuaternionsOpposite with new informationYuri Kunde Schlesner1-8/+11
While debugging the software renderer implementation, it was noticed that this is actually exactly what the hardware does, upgrading the status of this "hack" to being a proper implementation. And there was much rejoicing.
2017-06-09Remove unused import in break_points.cpp (#2763)Kloen Lansfiel1-1/+0
2017-06-09Service/sm: Convert 'srv:' to ServiceFrameworkYuri Kunde Schlesner5-51/+75
2017-06-08Session: Remove/add some forward declarationsYuri Kunde Schlesner3-2/+2
2017-06-08Kernel: Ensure objects are kept alive during ClientSession disconnectionYuri Kunde Schlesner1-7/+13
Fixes #2760
2017-06-08Service: Remove a few redundant namespace qualifiersYuri Kunde Schlesner1-5/+5
2017-06-08Service: Add new ServiceFramework framework for writing HLE servicesYuri Kunde Schlesner5-4/+269
The old "Interface" class had a few problems such as using free functions (Which didn't allow you to write the service handler as if it were a regular class.) which weren't very extensible. (Only received one parameter with a pointer to the Interface object.) The new ServiceFramework aims to solve these problems by working with member functions and passing a generic context struct as parameter. This struct can be extended in the future without having to update all existing service implementations.
2017-06-06Kernel: Remove some unnecessary namespace qualificationsYuri Kunde Schlesner1-4/+6
2017-06-06Services/UDS: Implement DecryptBeaconData.Subv1-1/+97
This function decrypts the encrypted data tags contained in the 802.11 beacon frames.
2017-06-06Service: Remove unnecessary includes from service.hYuri Kunde Schlesner32-12/+80
This has a huge fallout in terms of needing to fix other files because all service implementations included that file.
2017-06-06Service: Make service registration part of the sm implementationYuri Kunde Schlesner6-24/+147
Also enhances the GetServiceHandle implementation to be more accurate.
2017-06-06Service/sm: Use an actual semaphore for the notification semaphoreYuri Kunde Schlesner1-8/+9
An Event was used way back then when we didn't have proper working semaphores. Our Semaphore implementation is good enough now.
2017-06-06Service: Move SRV interface to a new sm/ subdirectoryYuri Kunde Schlesner4-9/+10
This will contain the implementation of the sm (Service Manager) system module.
2017-06-06Kernel: Add a dedicated SetHleHandler method to ServerPort/ServerSessionYuri Kunde Schlesner11-62/+73
This allows attaching a HLE handle to a ServerPort at any point after it is created, allowing port/session creation to be generic between HLE and regular services.
2017-06-06ResultVal: Add more convenience utils for creating and cascading resultsYuri Kunde Schlesner1-0/+19
2017-06-06HLE: Move SessionRequestHandler from Service:: to Kernel::Yuri Kunde Schlesner14-73/+100
Most of the code that works with this is or will be in the kernel, so it's a more appropriate place for it to be.
2017-06-04pica/rasterizer: implement/stub texture wrap mode 4-7wwylele4-12/+48
2017-06-03Edit Citra URLs (#2728)Alex Touchet1-1/+1
2017-06-03Remove unused imports in game_list_p.hKloen1-2/+0
2017-06-03Addressed Bunnei's review comments, and made some other tweaks:TheKoopaKingdom7-29/+32
- Deleted GetStatus() because it wasn't used anywhere outside of Core::System. - Fixed design flaw where the message bar status could be set despite the game being stopped.
2017-06-03Fixed wiki URLs.TheKoopaKingdom1-6/+8
2017-06-03Switched to the ERROR_NOT_FOUND constant from errors.h.TheKoopaKingdom2-4/+3
2017-06-03Moved whitelist checks from FS_User to the Archive_NCCH handler.TheKoopaKingdom2-53/+37
2017-06-03Created a whitelist of system archives to prevent false positives creating dialogs.TheKoopaKingdom9-35/+70
2017-06-03Optimized messages that were repetitive and added ability for core errors to specify more details optionally.TheKoopaKingdom5-39/+70
2017-06-03Added message to status bar to show core errors ignored by the user.TheKoopaKingdom2-1/+11
2017-06-03Made some changes from review comments:TheKoopaKingdom10-53/+55
- Made LoadKernelSystemMode return a pair consisting of a system mode and a result code (Could use review). - Deleted ErrorOpenGL error code in favor of just having ErrorVideoCore. - Made dialog messages more clear. - Compared archive ID in fs_user.cpp to ArchiveIdCode::NCCH as opposed to hex magic. - Cleaned up some other stuff.
2017-06-03Added system for handling core errors in citra-qt.TheKoopaKingdom9-26/+121
2017-06-03Fixed encrypted ROM error messages.TheKoopaKingdom3-9/+19
2017-05-30gl_rasterizer: implement spot lightwwylele1-6/+24
2017-05-30gl_rasterizer: sync spot light statuswwylele4-2/+61
2017-05-30pica: prepare registers for spotlightwwylele1-20/+43
2017-05-30Kernel: Move HandleTable to a separate fileYuri Kunde Schlesner18-203/+242
2017-05-30Kernel: Move WaitObject to a separate fileYuri Kunde Schlesner15-135/+178
Now that HandleTable doesn't directly depend on WaitObject anymore, this can be separated from the main kernel.h header.
2017-05-30Kernel: Removed HandleTable::GetWaitObjectYuri Kunde Schlesner2-11/+2
This isn't necessary anymore since plain Get works correctly for WaitObjects.
2017-05-29Kernel: Extract dynamic Object pointer cast into its own functionYuri Kunde Schlesner1-11/+24
2017-05-29swrasterizer: implement TextureCubewwylele1-2/+51
2017-05-29pica: add registers for texture cubewwylele1-1/+26
2017-05-28CMake: Create an INTERFACE target for CatchYuri Kunde Schlesner1-4/+2
2017-05-28CMake: Create INTERFACE targets for microprofile and nihstroYuri Kunde Schlesner3-3/+3
2017-05-28CMake: Remove unnecessary include_directories for dynarmicYuri Kunde Schlesner1-3/+0
Dynarmic already adds the correct include paths to the library target.
2017-05-28CMake: Add cryptopp include path to target propertyYuri Kunde Schlesner1-1/+0
2017-05-28CMake: Add SoundTouch include path to target propertyYuri Kunde Schlesner1-2/+0
2017-05-28CMake: Define an interface target for SDL2 definitionsYuri Kunde Schlesner3-8/+4
2017-05-28CMake: Remove CITRA_QT_LIBS varYuri Kunde Schlesner1-1/+1
This used to be required to support both Qt4 and Qt5, but we dropped Qt4 so it's not needed anymore.
2017-05-28CMake: Stop using FindOpenGL, which seems to not be required anymoreYuri Kunde Schlesner2-2/+2
2017-05-28CMake: Use IMPORTED target for BoostYuri Kunde Schlesner3-2/+3
2017-05-28CMake: Use IMPORTED target for libpngYuri Kunde Schlesner1-3/+2
2017-05-28CMake: Correct inter-module dependencies and library visibilityYuri Kunde Schlesner8-23/+27
Modules didn't correctly define their dependencies before, which relied on the frontends implicitly including every module for linking to succeed. Also changed every target_link_libraries call to specify visibility of dependencies to avoid leaking definitions to dependents when not necessary.
2017-05-28Citra: Convert include into forward declarationYuri Kunde Schlesner2-2/+6
2017-05-28Remove some unnecessary inclusions of video_core.hYuri Kunde Schlesner4-4/+0
2017-05-28Move screen size constants from video_core to coreYuri Kunde Schlesner9-51/+63
video_core didn't even properly use them, and they were the source of many otherwise-unnecessary dependencies from core to video_core.
2017-05-28OpenGL: Remove unused RendererOpenGL fieldsYuri Kunde Schlesner2-11/+2
2017-05-28Core: Fix some out-of-style includesYuri Kunde Schlesner4-4/+4
2017-05-28Common: Fix some out-of-style includesYuri Kunde Schlesner3-5/+5
2017-05-28Move framebuffer_layout from Common to CoreYuri Kunde Schlesner5-4/+4
This removes a dependency inversion between core and common. It's also the proper place for the file since it makes screen layout decisions specific to the 3DS.
2017-05-27fixup!cam: use IPCHelperwwylele2-30/+43
2017-05-27OpenGL: Improve accuracy of quaternion interpolationYuri Kunde Schlesner1-3/+5
Current order of operations (rotate then normalize) seems to produce a lot more distortion than normalizing and then rotating. This makes Citra results match pretty closesly with hardware, and indicates that hardware may also be using lerp instead of slerp to interpolate the quaternions.
2017-05-27gl_shader: refactor texture sampler into its own functionwwylele1-40/+39
2017-05-25FS: Remove unused result definitionYuri Kunde Schlesner1-5/+0
2017-05-25Common: Clean up meta-template logic in BitFieldYuri Kunde Schlesner1-3/+3
2017-05-25Kernel: Centralize error definitions in errors.hYuri Kunde Schlesner23-132/+178
2017-05-25GSP_GPU: Move error codes from result.h to local fileYuri Kunde Schlesner2-17/+23
2017-05-25FileSys: Move all result description to errors.hYuri Kunde Schlesner10-105/+115
2017-05-25result: Make error description a generic integerYuri Kunde Schlesner3-6/+18
It is now known that result code description vary depending on the module, and so they're best defined on a per-module basis. To support this, allow passing in an arbitrary integer instead of limiting to the ones in the ErrorDescription enum. These will be gradually migrated to their individual users, but a few will be kept as "common" codes shared by all modules.
2017-05-25Make BitField and ResultCode constexpr-initializableYuri Kunde Schlesner2-41/+57
2017-05-25telemetry: Log a few simple data fields throughout core.bunnei3-1/+22
2017-05-25core: Keep track of telemetry for the current emulation session.bunnei5-0/+83
2017-05-25common: Add a generic interface for logging telemetry fields.bunnei3-0/+238
2017-05-24cam: move u32->u8 trancation to IPCHelperwwylele1-34/+33
2017-05-24cam: use IPCHelperwwylele1-278/+238
2017-05-22fixup! Dyncom/VFP: Convert denormal outputs into 0 when the FTZ flag is enabled.Subv2-4/+0
2017-05-22Kernel/Sessions: Remove the ClientSession::Create function.Subv3-16/+3
It is not meant to be used by anything other than CreateSessionPair.
2017-05-21swrasterizer: add missing tc0_w and fragment lighting attribute processingwwylele2-5/+8
2017-05-20gl_rasterizer: implement procedural texturewwylele6-7/+600
2017-05-20pica/swrasterizer: implement procedural texturewwylele9-4/+448
2017-05-19use IPCHelper for PTM servicesemmaus3-31/+45
2017-05-17pica: use correct register value for shader bool_uniformswwylele1-2/+2
variable value is not masked. the masked and combined register value should be used instead
2017-05-16pica: correct bit field length for some registerswwylele4-17/+25
2017-05-15Services/UDS: Use the new IPC helper functions.Subv1-21/+10
2017-05-15Services/UDS: Implement RecvBeaconBroadcastData.Subv1-19/+69
This allows the applications to retrieve 802.11 beacon frames from nearby UDS networks. Note that the networks are still not announced anywhere.
2017-05-15Services/UDS: Generate the UDS beacons when the beacon callback fires.Subv5-7/+537
2017-05-15Kernel: Remove a now unused enum and variable regarding a session's status.Subv2-8/+0
2017-05-15Kernel: Use a Session object to keep track of the status of a Client/Server session pair.Subv8-32/+86
Reduce the associated port's connection count when a ServerSession is destroyed.
2017-05-14Dyncom/VFP: Perform flush-to-zero on the second operand of vsub before sending it to vadd.Subv1-2/+12
Previously we were letting vadd flush the value to positive 0, but there are cases where this behavior is wrong, for example, vsub: -0 - +0 = -0 vadd: -0 + +0 = +0 Now we'll flush the value to +0 inside vsub, and then negate it.
2017-05-12Pica: Write GS registersJannik Vogel1-0/+52
This adds the handlers for the geometry shader register writes which will call the functions from the previous commit to update registers for the GS.
2017-05-12Pica: Write shader registers in functionsJannik Vogel1-57/+103
The commit after this one adds GS register writes, so this moves the VS handlers into functions so they can be re-used and extended more easily.
2017-05-11Pica: Set program code / swizzle data limit to 4096Jannik Vogel5-13/+16
One of the later commits will enable writing to GS regs. It turns out that on startup, most games will write 4096 GS program words. The current limit of 1024 would hence result in 3072 (4096 - 1024) error messages: ``` HW.GPU <Error> video_core/shader/shader.cpp:WriteProgramCode:229: Invalid GS program offset 1024 ``` New constants have been introduced to represent these limits. The swizzle data size has also been raised. This matches the given field sizes of [GPUREG_SH_OPDESCS_INDEX](https://3dbrew.org/wiki/GPU/Internal_Registers#GPUREG_SH_OPDESCS_INDEX) and [GPUREG_SH_CODETRANSFER_INDEX](https://www.3dbrew.org/wiki/GPU/Internal_Registers#GPUREG_SH_CODETRANSFER_INDEX) (12 bit = [0; 4095]).
2017-05-10Frontend: Prevent FileSystemWatcher from blocking UI threadJames Rowe3-46/+35
Instead of tying the QFileSystemWatcher to the GameList and updating in the UI thread, this change moves it to the worker thread. Since it gets deleted and recreated as part of the worker thread, this prevents it from ever getting used from multiple threads (which is why it was originally done on the UI thread)
2017-05-10Kernel: Map special regions according to ExHeaderYuri Kunde Schlesner5-52/+105
This replaces the hardcoded VRAM/DSP mappings with ones made based on the ExHeader ARM11 Kernel caps list. While this has no visible effect for most applications (since they use a standard set of mappings) it does improve support for system modules and n3DS exclusives.
2017-05-10DSP: Create backing memory for entire DSP RAMYuri Kunde Schlesner5-32/+42
Also move address space mapping out of video_core.
2017-05-10Memory: Add constants for the n3DS additional RAMYuri Kunde Schlesner2-2/+16
This is 4MB of extra, separate memory that was added on the New 3DS.
2017-05-09Dyncom/VFP: Strip the VFP_NAN_FLAG sentinel value when setting vfp exceptions.Subv2-2/+2
2017-05-09Revert "Remove `exceptions` parameter from `normaliseround` VFP functions"Subv3-57/+28
This reverts commit edf30d84cc0e8299d61c98f5bb40a6428d1576bc. Conflicts: src/core/arm/skyeye_common/vfp/vfp_helper.h src/core/arm/skyeye_common/vfp/vfpdouble.cpp src/core/arm/skyeye_common/vfp/vfpsingle.cpp
2017-05-08Dyncom/VFP: Convert denormal outputs into 0 when the FTZ flag is enabled.Subv2-0/+30
Inputs are still not flushed to 0 if they are denormals.
2017-05-08Dyncom: Remove disassembler codeYuri Kunde Schlesner4-1589/+2
Had licensing issue around it, in addition to several bugs. Closes #1632, #1280
2017-05-08Dyncom: Tweak types and log formattingYuri Kunde Schlesner3-8/+10
2017-05-08Remove unused symbols codeYuri Kunde Schlesner6-124/+0
2017-05-08Remove ability to load symbol mapsYuri Kunde Schlesner5-55/+2
This was now mostly unused except by thread creation, which used a symbol of the entrypoint, if available, to name the thread.
2017-05-08citra-qt: Remove callstack widgetYuri Kunde Schlesner6-168/+0
Appears to be currently broken, and given the complexity of doing this for ARM code without debugging information, should probably be left to an external tool or library. Use the GDB stub instead. Closes #586
2017-05-08citra-qt: Remove disassembler widgetYuri Kunde Schlesner6-448/+0
It has performance problems, a very misleading UI, and is broken in general. It has essentially been superceded by the GDB stub, but if we wanted a built-in disassembler in the future it'd essentially need to be rewritten from scratch anyway. Closes #427, #1480
2017-05-07fixup!ir: implement new 3ds HID via ir:rstwwylele1-31/+32
2017-05-06Don’t focus the search field if the game is emptyNico Bosshard1-3/+6
2017-05-06Create a random console_unique_id (#2668)B3n305-7/+123
* Create a random console_id when config save_file is created Added button in system config to refresh the console unique id * Moved the connect for the button from .ui file to constructor of ConfigureSystem * Added warning and info dialog Fixup: Make use of qt5 style connects, renamed the refresh button, removed some duplicate code, changed random device and moved all to the generate function * Changed the random generator to reflect what a real 3DS stores as console unique id Fixup: Changed the warning message * Fixup: Set and Create * Fixup: Added console id label, therfore removed second message box * Fixup: fixed the endianess * Fixup: more endianness fixes * Fixup: Endianness the 3rd
2017-05-05pica: shader_dirty if texture2 coord changedwwylele5-7/+12
2017-05-04ir: implement new 3ds HID via ir:rstwwylele9-24/+207
2017-05-03pica: use correct coordinates for texture 2wwylele4-5/+22
2017-05-03ir: implement circle pad prowwylele6-44/+761
2017-05-03Fixed some more typosNico Bosshard2-4/+4
2017-05-02citra-qt: game list search function fixed minor mistakesNico Bosshard1-24/+26
2017-04-30citra-qt: game list search function (#2673)Nico Bosshard7-19/+299
* citra-qt: game list search function * Empty search field during game list refresh * Code improvements * Code formatting * Autofocus search field * JayFoxRox's recommendations * lioncash's review
2017-04-20gl_shader_gen: remove TODO about Lerp behaviour verification. The implementation is verified against hardwarewwylele1-2/+0
2017-04-19rasterizer: implement combiner operation 7 (Dot3_RGBA)wwylele4-20/+39
2017-04-17OpenGL: Pass Pica regs via parameterYuri Kunde Schlesner3-7/+5
2017-04-17input_common/sdl: add support for binding button to axiswwylele2-4/+59
2017-04-17ldr_ro: use IPC helperwwylele1-193/+138
2017-04-17OpenGL: Move PicaShaderConfig to gl_shader_gen.hYuri Kunde Schlesner4-202/+206
Also move the implementation of CurrentConfig to the cpp file.
2017-04-17OpenGL: Move Attributes enum to a more appropriate fileYuri Kunde Schlesner3-12/+11
2017-04-13Better looking status bar under Linux Ubuntu (#2662)Cereal-Killa1-0/+1
* Remove borders from status bar items On Ubuntu the status bar didn't look as good as on Windows due to some border being drawn around each status bar cell.
2017-04-12dsp_dsp: Messages are modified by service before being sent to DSPMerryMage1-0/+18
2017-04-09qt: enable config for circle pad prowwylele1-7/+1
2017-04-08Pica/Regs: Correct bit width for blend-equationsJannik Vogel1-2/+2
2017-04-04citra-qt: Move config dialog code to its own directoryLioncash25-41/+41
2017-04-03error conversion fixes for soc_unoah the goodra1-39/+32
2017-04-01Fix OutputDebugString syscallMichael Theall2-4/+4
2017-03-27Services/UDS: Fixed a style mistake in GetChannel.Sebastian Valle1-2/+1
2017-03-26Services/UDS: Use consistent spelling for WiFi and simplify the GetChannel function.Subv1-4/+4
2017-03-26Services/UDS: Signal the connection event when closing down the network.Subv1-0/+1
2017-03-26Services/UDS: Do not allow trying to start up a network that only the host can connect to.Subv1-0/+3
2017-03-26Service/UDS: Schedule an event to broadcast the beacon frames every 102.4ms.Subv2-2/+58
2017-03-26Services/UDS: Store the entire NetworkInfo structure that was used to create the network.Subv1-13/+5
It will be needed when generating the beacon frames.
2017-03-26Services/UDS: Initial support for hosting local-wlan networks.Subv2-44/+336
Currently it will let games create a network as hosts, but will not broadcast it anywhere and will not allow clients to connect.
2017-03-25ptm: create SharedExtSave file before openning itwwylele1-1/+1
2017-03-21shared_page: stub battery statewwylele2-1/+16
2017-03-20hopefully fix clang-format issues with old versionLectem1-3/+2
2017-03-19address more commentsLectem1-20/+20
2017-03-18Cast size_t to u32 for PushStaticBuffer usagesLectem1-2/+2
2017-03-18IPCHelper Skip method + address comments for aptLectem3-38/+46
2017-03-18apt: fix RequestBuilder parameters for Unwrapwwylele1-1/+1
2017-03-18fix #2560 and other commentsLectem3-22/+22
2017-03-18move push out of class body and add u8 u16 bool specializationsLectem4-55/+114
2017-03-18refactor APT service to use the new IPC helpersLectem4-195/+258
2017-03-17citra-qt: remove dead codewwylele3-5/+0
2017-03-17citra-qt: release all buttons when render window focus is lostwwylele4-0/+20
credit to @Hawkheart for the original idea
2017-03-13common/cpu_detect: Add missing include and fix namespace scopeYuri Kunde Schlesner1-5/+7
2017-03-12cfg: implement GenHashConsoleUniquewwylele1-7/+24
2017-03-11file_util: Log when using local user directorywwylele1-0/+2
2017-03-09Refined thread launch on syscore error messagesFernando Sahmkow1-5/+15
2017-03-08file_sys: lower log level for setting host pathwwylele4-4/+4
2017-03-08file_util: lower logging level for harmless caseswwylele1-9/+7
2017-03-08loader/ncch: less verbose log for loading game list. only log program ID when bootingwwylele1-3/+6
2017-03-08loader: lower file name logging levelwwylele1-1/+1
2017-03-02qt/config_input: don't connect for null buttonwwylele1-4/+7
2017-03-01citra: update default ini with new input systemwwylele1-28/+41
2017-03-01Input: remove unused stuff & clean upwwylele9-412/+3
1. removed zl, zr and c-stick from HID::PadState. They are handled by IR, not HID 2. removed button handling in EmuWindow 3. removed key_map 4. cleanup #include
2017-03-01Qt: rework input configuration for new input systemwwylele2-68/+144
2017-03-01InputCommon: add SDL joystick supportwwylele4-0/+241
2017-03-01InputCommon: add AnalogFromButtonwwylele8-0/+162
2017-03-01InputCommon: add Keyboardwwylele17-85/+254
2017-03-01HID: use AnalogDevicewwylele3-2/+30
2017-03-01HID: use ButtonDevicewwylele5-1/+100
2017-03-01Input: add device and factory templatewwylele4-0/+100
2017-03-01Common: add ParamPackagewwylele5-0/+188
2017-02-27Timer: restore missing signaled=true from #2421wwylele1-0/+2
2017-02-27Fix log entry in timer::signal (#2600)B3n301-1/+1
2017-02-27Doxygen: Amend minor issues (#2593)Mat M18-23/+31
Corrects a few issues with regards to Doxygen documentation, for example: - Incorrect parameter referencing. - Missing @param tags. - Typos in @param tags. and a few minor other issues.
2017-02-27PerfStats: Re-order and document members betterYuri Kunde Schlesner2-5/+14
2017-02-27Qt: Tweak status bar stylingYuri Kunde Schlesner1-0/+2
2017-02-27Qt: Increase status bar update interval to 2 secondsYuri Kunde Schlesner1-1/+1
2017-02-27Core: Re-write frame limiterYuri Kunde Schlesner5-42/+53
Now based on std::chrono, and also works in terms of emulated time instead of frames, so we can in the future frame-limit even when the display is disabled, etc. The frame limiter can also be enabled along with v-sync now, which should be useful for those with displays running at more than 60 Hz.
2017-02-27Core: Make PerfStats internally lockedYuri Kunde Schlesner7-16/+25
More ergonomic to use and will be required for upcoming changes.
2017-02-27Qt: Add tooltips to status bar displaysYuri Kunde Schlesner1-0/+7
2017-02-27Qt: Don't show fractional figures in the status barYuri Kunde Schlesner1-2/+2
They're not very important and this makes the display changes less often, making it less distracting.
2017-02-27Remove built-in (non-Microprofile) profilerYuri Kunde Schlesner9-382/+2
2017-02-27PerfStats: Add method to get the instantaneous time ratioYuri Kunde Schlesner3-7/+22
2017-02-27Add performance statistics to status barYuri Kunde Schlesner11-3/+159
2017-02-27SynchronizedWrapper: Add Lock convenience methodYuri Kunde Schlesner1-18/+25
2017-02-27Qt: Add (empty) status barYuri Kunde Schlesner6-1/+35
2017-02-27Core: Remove unnecessary include in thread.hYuri Kunde Schlesner4-1/+3
2017-02-26IR: separate functions of each port to their own fileswwylele6-147/+159
2017-02-23Use QFileSystemWatcher to reload the game list when a change is detected. (#2555)James Rowe2-1/+51
* Added a refresh game directory option to the file menu * Make the game list watcher recursive and have it start watching from the initial load * Rework game list watcher to be thread safe * Fix code style issues
2017-02-23Add custom layout settings.SonofUgly9-13/+104
2017-02-23Gui: Change title bar to include build nameJames Rowe6-5/+32
Nightly builds now have "Citra Nightly" in the titlebar Bleeding edge builds now have "Citra Bleeding Edge" in the titlebar
2017-02-23[UI] Modify recursive scanning label (#2589)Anthony1-1/+1
2017-02-22Timers: Return an error when calling SetTimer with negative timeouts.Subv1-0/+5
2017-02-22Timers: Immediately signal the timer if it was started with an initial value of 0.Subv2-16/+31
2017-02-21APT: implement Wrap and Unwrapwwylele5-6/+149
2017-02-21HW: add AES engine & implement AES-CCMwwylele11-0/+418
2017-02-18dyncom: Correct SXTAB16 and SXTB16MerryMage1-4/+4
2017-02-18OpenGL: Check if uniform block exists before updating it (#2581)Jannik Vogel1-29/+30
2017-02-18Qt: Move some connections from .ui file to codeYuri Kunde Schlesner2-38/+3
2017-02-18Qt: Reorganize connection of menu eventsYuri Kunde Schlesner2-13/+23
2017-02-18Qt: Re-organize setup of debugging widgetsYuri Kunde Schlesner4-39/+51
2017-02-18Qt: Fix action name to match conventionsYuri Kunde Schlesner2-6/+6
2017-02-18Qt: Make IsSingleFileDropEvent staticYuri Kunde Schlesner1-1/+1
2017-02-18Qt: Allow any file extension in Open dialogYuri Kunde Schlesner1-2/+3
2017-02-18Qt: Remove orpahned function declarationYuri Kunde Schlesner1-6/+0
2017-02-18Qt: Remove unnecessary std::string usageYuri Kunde Schlesner2-14/+15
2017-02-17HID: move enable_accelerometer/gyroscope_count initialization into Init() (#2574)Weiyi Wang1-2/+5
Fixes #2556
2017-02-16added drag n drop featurenoah the goodra2-1/+41
2017-02-15core: add missing errors.h in CMakeLists.txtwwylele1-0/+1
2017-02-15video_core: remove #pragma once in cpp file (#2570)Weiyi Wang2-4/+0
2017-02-14HLE/IPC: Fix uninitialized variables in helpers (#2568)Yuri Kunde Schlesner1-3/+3
Fixes #2567
2017-02-14Qt/GameList: Use suffix() to parse the file extensionYuri Kunde Schlesner1-1/+1
completeSuffix returns everything after the first period, which means that a file such as `foo.bar.3ds` would not get recognized.
2017-02-14applied the change suggested by @wwylelenoah the goodra1-0/+1
2017-02-14NWM changed to NIMnoah the goodra1-1/+1
2017-02-14turned clang format back onnoah the goodra1-1/+1
2017-02-14added http service enum to the log.h filenoah the goodra1-0/+1
2017-02-13Core: add cryptopp library (#2412)Weiyi Wang1-1/+2
2017-02-13loader: use self NCCH archivewwylele6-90/+7
2017-02-13file_sys: add Self NCCH archivewwylele5-0/+318
2017-02-13SWRasterizer: Move more framebuffer functions to fileYuri Kunde Schlesner3-100/+105
2017-02-13SWRasterizer: Move texturing functions to their own fileYuri Kunde Schlesner4-210/+259
2017-02-13SWRasterizer: Convert large no-capture lambdas to standalone functionsYuri Kunde Schlesner1-315/+310
2017-02-13SWRasterizer: Move framebuffer operation functions to their own fileYuri Kunde Schlesner4-236/+285
2017-02-13VideoCore: Move software rasterizer files to sub-directoryYuri Kunde Schlesner8-12/+12
2017-02-12video_core/shader: Document sanitized MUL operationYuri Kunde Schlesner1-0/+8
2017-02-12citra-qt: Don't attempt to scan files with unsupported extensions (#2402)Kloen Lansfiel3-4/+20
2017-02-11core: Free AppLoader on shutdown to release file (#2558)Yuri Kunde Schlesner1-9/+2
Fixes #2455
2017-02-11hid: remove the touch field from PadState (#2557)Weiyi Wang2-6/+0
2017-02-11video_core: Fix benign out-of-bounds indexing of array (#2553)Yuri Kunde Schlesner1-2/+1
The resulting pointer wasn't written to unless the index was verified as valid, but that's still UB and triggered debug checks in MSVC. Reported by garrettboast on IRC
2017-02-09VideoCore: Split u64 Pica reg unions into 2 separate u32 unionsYuri Kunde Schlesner1-36/+42
This eliminates UB when aliasing it with the array of u32 regs, and is compatible with non-LE architectures.
2017-02-09VideoCore: Force enum sizes to u32 in LightingRegsYuri Kunde Schlesner1-4/+4
All enums that are used with BitField must have their type forced to u32 to ensure correctness.
2017-02-09OpenGL: Remove unused duplicate of IsPassThroughTevStageYuri Kunde Schlesner1-12/+0
This copy was left behind when the shader generation code was moved to a separate file.
2017-02-09VideoCore: Split regs.h inclusionsYuri Kunde Schlesner14-25/+47
2017-02-09Pica/Regs: Use binary search to look up reg namesYuri Kunde Schlesner3-16/+11
This gets rid of the static unordered_map. Also changes the return type const char*, avoiding unnecessary allocations (the result was only used by calling .c_str() on it.)
2017-02-09VideoCore: Use union to index into Regs structYuri Kunde Schlesner2-46/+28
Also remove some unused members.
2017-02-05Use std::array<u8,2> instead of u8[2] to fix MSVC buildLectem1-1/+1
2017-02-05fix wwylele's comment and use typename in templatesLectem1-4/+4
2017-02-04VideoCore: Move Regs to its own fileYuri Kunde Schlesner26-662/+681
2017-02-04VideoCore: Split shader regs from Regs structYuri Kunde Schlesner9-102/+116
2017-02-04VideoCore: Split geometry pipeline regs from Regs structYuri Kunde Schlesner9-264/+292
2017-02-04VideoCore: Split lighting regs from Regs structYuri Kunde Schlesner6-312/+341
2017-02-04VideoCore: Split framebuffer regs from Regs structYuri Kunde Schlesner11-457/+503
2017-02-04VideoCore: Split texturing regs from Regs structYuri Kunde Schlesner17-507/+548
2017-02-04VideoCore: Split rasterizer regs from Regs structYuri Kunde Schlesner14-188/+219
2017-02-04Pica/Texture: Move part of ETC1 decoding to new file and cleanupsYuri Kunde Schlesner4-110/+159
2017-02-04Pica/Texture: Simplify/cleanup texture tile addressingYuri Kunde Schlesner5-44/+117
2017-02-04VideoCore: Move LookupTexture out of debug_utils.hYuri Kunde Schlesner9-308/+350
2017-02-03arm_dynarmic: Update memory interfaceMerryMage1-10/+10
2017-02-03arm_dynarmic: CP15 supportMerryMage5-5/+130
2017-02-03ShaderJIT: add 16 dummy bytes at the bottom of the stackwwylele1-2/+5
2017-02-03GSP_GPU::StoreDataCache stubbed (#2428)mailwl1-1/+28
2017-01-31removed the possibly uneeded cast on values.gdbstub_portnoah the goodra1-1/+1
as far as i could tell this cast is unneeded because [GDBStub::SetServerPort](https://github.com/citra-emu/citra/blob/master/src/core/gdbstub/gdbstub.cpp#L897) takes a u16 and [values.gdbstub_port](https://github.com/citra-emu/citra/blob/master/src/core/settings.h#L116) is already a u16
2017-01-31removal of the -1 case in the configure_input switchnoah the goodra1-1/+0
this case is unneeded because no enumeration value can possibly correspond to it
2017-01-31HLE/Applets: Stub Mint (eShop) Applet (#2463)mailwl4-0/+108
This allows Phoenix Wright - Dual Destinies to boot.
2017-01-31Common/x64: remove legacy emitter and abi (#2504)Weiyi Wang6-4202/+1
These are not used any more since we moved shader JIT to xbyak.
2017-01-31shader_jit_x64_compiler: esi and edi should be persistent (#2500)Merry1-0/+2
2017-01-31file_util: Fixed implicit type conversion warning (#2503)noah the goodra1-2/+2
2017-01-30Core: update Kernel Config Memory to latest version (11.2)mailwl1-5/+8
2017-01-30Support looping HLE audio (#2422)Jake Merdich2-11/+35
* Support looping HLE audio * DSP: Fix dirty bit clears, handle nonmonotonically incrementing IDs * DSP: Add start offset support
2017-01-30VideoCore: Make PrimitiveAssembler const-correctYuri Kunde Schlesner2-3/+4
2017-01-30VideoCore: Extract swrast-specific data from OutputVertexYuri Kunde Schlesner5-58/+64
2017-01-30VideoCore/Shader: Clean up OutputVertex::FromAttributeBufferYuri Kunde Schlesner2-10/+16
This also fixes a long-standing but neverthless harmless memory corruption bug, whech the padding of the OutputVertex struct would get corrupted by unused attributes.
2017-01-30Common: Optimize BitSet iteratorYuri Kunde Schlesner1-14/+19
2017-01-30VideoCore: Split shader output writing from semantic loadingYuri Kunde Schlesner3-24/+24
2017-01-30VideoCore: Consistently use shader configuration to load attributesYuri Kunde Schlesner7-47/+26
2017-01-30VideoCore: Use correct register for immediate mode attribute countYuri Kunde Schlesner2-7/+13
2017-01-30VideoCore: Rename some types to more accurate namesYuri Kunde Schlesner10-21/+21
2017-01-30VideoCore: Change misleading register namesYuri Kunde Schlesner4-8/+9
A few registers had names such as "count" or "number" when they actually contained the maximum (that is, count - 1). This can easily lead to hard to notice off by one errors.
2017-01-30video_core: gl_rasterizer_cache.cpp removed unused type aliasKloen1-1/+0
2017-01-30video_core: gl_rasterizer.cpp removed unused type aliasKloen1-2/+0
2017-01-30core: inline CPU, 132 warnings fixed on GCCKloen1-1/+1
2017-01-29citra: add missing control paths for ResultStatus on rom load. Fix warning about unhandled enumeration values on OSXKloen1-0/+20
2017-01-29core: fix err_f.cpp warning about unhandled enumeration value on OSXKloen1-0/+2
2017-01-29core: fix savedata_archive.cpp warnings about unhandled enumeration values on OSXKloen1-0/+12
2017-01-29core: fix archive_sdmc.cpp warnings about unhandled enumeration value on OSXKloen1-0/+12
2017-01-29core: fix archive_extsavedata.cpp warning on OSXKloen1-0/+2
2017-01-29video_core: silence unused-local-typedef boost related warning on GCCKloen1-0/+7
2017-01-29core: emu_window.cpp, fix conversion warnings from float to s16 on MSVCKloen1-6/+6
2017-01-28common: add <cstddef> to hash.hKloen1-0/+1
2017-01-28common: switch ComputeHash64 len param to size_t instead of int, fix warning on MSVC on dsp_dsp.cppKloen2-6/+6
2017-01-27fixed the override warningnoah the goodra1-1/+1
``` In file included from citra/src/audio_core/sink_details.cpp:11: citra/src/./audio_core/sdl2_sink.h:25:10: warning: 'SetDevice' overrides a member function but is not marked 'override' [-Winconsistent-missing-override] void SetDevice(int device_id); ^ citra/src/./audio_core/sink.h:39:18: note: overridden virtual function is here virtual void SetDevice(int device_id) = 0; ^ ```
2017-01-26SDL: Select audio device (#2403)Kloen Lansfiel14-18/+129
* Initial Commit Added Device logic to Sinks Started on UI for selecting devices Removed redundant import * Audio Core: Complete Device Switching Complete the device switching implementation by allowing the output device to be loaded, changed and saved through the configurations menu. Worked with the Sink abstraction and tuned the "Device Selection" configuration so that the Device List is automatically populated when the Sink is changed. This hopefully addresses the concerns and recommendations mentioned in the comments of the PR. * Clean original implementation. * Refactor GetSinkDetails
2017-01-26VideoCore/Shader: Move entry_point to SetupBatchYuri Kunde Schlesner7-29/+29
2017-01-26VideoCore/Shader: Move per-batch ShaderEngine state into ShaderSetupYuri Kunde Schlesner7-46/+43
2017-01-26Shader: Remove OutputRegisters structYuri Kunde Schlesner4-22/+17
2017-01-26Shader: Initialize conditional_code in interpreterYuri Kunde Schlesner2-3/+3
This doesn't belong in LoadInputVertex because it also happens for non-VS invocations. Since it's not used by the JIT it seems adequate to initialize it in the interpreter which is the only thing that cares about them.
2017-01-26Shader: Don't read ShaderSetup from global stateYuri Kunde Schlesner1-3/+3
2017-01-26shader_jit_x64: Don't read program from global stateYuri Kunde Schlesner3-22/+22
2017-01-26VideoCore/Shader: Move ProduceDebugInfo to InterpreterEngineYuri Kunde Schlesner5-19/+11
2017-01-26Debugger: Always use interpreter for shader debuggingYuri Kunde Schlesner1-3/+5
2017-01-26VideoCore/Shader: Split interpreter and JIT into separate ShaderEnginesYuri Kunde Schlesner8-97/+153
2017-01-26VideoCore/Shader: Rename shader_jit_x64{ => _compiler}.{cpp,h}Yuri Kunde Schlesner4-4/+4
2017-01-26VideoCore/Shader: Split shader uniform state and shader engineYuri Kunde Schlesner5-22/+57
Currently there's only a single dummy implementation, which will be split in a following commit.
2017-01-26VideoCore/Shader: Add constness to methodsYuri Kunde Schlesner2-4/+4
2017-01-26VideoCore/Shader: Use only entry_point as ShaderSetup paramYuri Kunde Schlesner4-12/+14
This removes all implicit dependency of ShaderState on global PICA state.
2017-01-26VideoCore/Shader: Use self instead of g_state.vs in ShaderSetupYuri Kunde Schlesner3-13/+9
2017-01-26VideoCore/Shader: Extract input vertex loading code into functionYuri Kunde Schlesner3-22/+26
2017-01-23video_core: fix shader.cpp signed / unsigned warningKloen1-2/+2
2017-01-23video_core: gl_rasterizer float to int warningKloen1-1/+2
2017-01-23video_core: fix gl_rasterizer warning on MSVCKloen1-1/+1
2017-01-23core: fix mic_u warnings on MSVCKloen1-4/+4
2017-01-22Removed unused and outdated external qhexeditKloen2-2/+2
2017-01-22citra-qt: Removed unused and unimplemented ramview files.Kloen4-32/+0
2017-01-20HID: reset acceleroeter and gyroscope index in Initwwylele1-0/+2
2017-01-19CFG: override language setting on bootwwylele1-36/+38
2017-01-18loader: Add support for 3DSX special relocation types, fixes citra-emu/citra#2449Thomas Farr1-9/+25
As per devkitPro/3dstools@47bea18
2017-01-16CoreTiming: use named constant for ARM11 clock ratewwylele4-5/+6
2017-01-16HID: manages updating itself using correct tickswwylele3-62/+93
2017-01-14Service/NFC: stub some functionsmailwl4-20/+249
Tested on: Mini-Mario & Friends - amiibo Challenge
2017-01-14GSP::WriteHWRegsWithMask: fix register maskmailwl1-1/+1
2017-01-11Threads: Check the process' resource limit for the max allowed priority when creating a thread and remove the priority clamping code.Subv2-13/+9
2017-01-11Thread: Added priority range checking to svcSetThreadPriority and removed priority clamping code from Thread::SetPriority.Subv3-18/+18
2017-01-11Y2R: Use the proper error code when GetStandardCoefficient receives an invalid value.Subv1-1/+3
2017-01-11QT: Fix ui file formatKloen1-20/+20
2017-01-11QT: Fix some UI related warningsKloen2-4/+3
2017-01-11SDL2: Config.cpp fix double to float warningKloen1-1/+2
2017-01-11CAM: implement basic camera functions with a blank camerawwylele14-172/+1520
2017-01-07config: Add option for specifying screen resolution scale factor.bunnei10-25/+170
2017-01-06Kernel: Fix SharedMemory objects always returning error when addr = 0 (#2404)Hyper1-1/+5
Closes #2400
2017-01-06Kernel: Don't attempt to yield execution in SleepThread(0) if there are no available threads to run.Subv3-0/+14
With this we avoid an useless temporary deschedule of the current thread.
2017-01-05Kernel: Remove some unused functions.Subv2-32/+0
2017-01-05Kernel: Removed the priority boost code for starved threads.Subv1-27/+0
After hwtesting and reverse engineering the kernel, it was found that the CTROS scheduler performs no priority boosting for threads like this, although some other forms of scheduling priority-starved threads might take place. For example, it was found that hardware interrupts might cause low-priority threads to run if the CPU is preempted in the middle of an SVC handler that deschedules the current (high priority) thread before scheduling it again.
2017-01-05Kernel: Implemented Pulse event and timers.Subv5-13/+20
Closes #1904
2017-01-05Kernel/Semaphore: Fixed a regression in semaphore waits.Subv1-1/+2
The regression was caused by a missing check in #2260. The new behavior is consistent with the real kernel.
2017-01-05Kernel: Add some asserts to enforce the invariants in the scheduler.Subv2-2/+13
2017-01-05Kernel: Remove a thread from all of its waiting objects' waiting_threads list when it is awoken.Subv1-18/+4
This fixes a potential bug where threads would not get removed from said list if they awoke after waiting with WaitSynchronizationN with wait_all = false
2017-01-05Kernel: Remove Thread::wait_objects_index and use wait_objects to hold all the objects that a thread is waiting on.Subv4-21/+22
2017-01-04Kernel: Use different thread statuses when a thread calls WaitSynchronization1 and WaitSynchronizationN with wait_all = true.Subv4-19/+26
This commit removes the overly general THREADSTATUS_WAIT_SYNCH and replaces it with two more granular statuses: THREADSTATUS_WAIT_SYNCH_ANY when a thread waits on objects via WaitSynchronization1 or WaitSynchronizationN with wait_all = false. THREADSTATUS_WAIT_SYNCH_ALL when a thread waits on objects via WaitSynchronizationN with wait_all = true.
2017-01-04Kernel/Mutex: Propagate thread priority changes to other threads inheriting the priority via mutexesSubv5-42/+60
2017-01-04Kernel/Mutex: Update a mutex priority when a thread stops waiting on it.Subv5-24/+42
2017-01-04Kernel/Mutex: Implemented priority inheritance.Subv5-31/+51
The implementation is based on reverse engineering of the 3DS's kernel. A mutex holder's priority will be temporarily boosted to the best priority among any threads that want to acquire any of its held mutexes. When the holder releases the mutex, it's priority will be boosted to the best priority among the threads that want to acquire any of its remaining held mutexes.
2017-01-04Kernel: Object ShouldWait and Acquire calls now take a thread as a parameter.Subv17-68/+56
This will be useful when implementing mutex priority inheritance.
2017-01-04Kernel/Synch: Do not attempt a reschedule on every syscall.Subv2-2/+18
Not all syscalls should cause reschedules, this commit attempts to remedy that, however, it still does not cover all cases.
2017-01-04Fix some warnings (#2399)Jonathan Hao13-35/+9
2016-12-30fix comments alignmentLectem1-22/+22
2016-12-30Service/NFC: stub GetTagInRangeEventmailwl7-0/+44
Fix Fatal Error in Mini-Mario & Friends - amiibo Challenge
2016-12-30Service/AC: add ac:i servicemailwl9-297/+424
2016-12-30config: SDL: Move background color setting to correct section.bunnei1-6/+6
2016-12-29Frontend: make motion sensor interfaced thread-safewwylele2-2/+8
2016-12-27Core: remove unused hle.cppwwylele1-58/+0
2016-12-26move Pop methods out of class bodyLectem1-72/+88
2016-12-26IPC helpers exampleLectem3-35/+40
2016-12-26IPC helpersLectem3-48/+323
2016-12-26Frontend: emulate motion sensorwwylele9-16/+239
2016-12-26Common: add Quaternionwwylele2-0/+45
2016-12-26vector math: add implementation of Length and Normalizewwylele1-0/+19
2016-12-26MathUtil: add PI constantwwylele1-0/+2
2016-12-26Common::Event: add WaitUntilwwylele1-0/+10
2016-12-25Minor cleanup in GLSL codeJannik Vogel1-3/+2
2016-12-25Offset lighting LUT samples correctlyJannik Vogel1-7/+7
2016-12-24Core: reset cpu_core in Shutdown to make IsPoweredOn work properlywwylele1-0/+1
2016-12-23file_util: fix missing sysdata pathwwylele1-3/+1
2016-12-23core: Move emu_window and key_map into coreMerryMage14-16/+16
* Removes circular dependences (common should not depend on core)
2016-12-22Service/NWM: add nwm servicesmailwl18-10/+317
2016-12-22arm_dynarmic: Provide MemoryReadCode callbackMerryMage1-0/+1
Change of interface in dynarmic 36082087ded632079b16d24137fdd0c450ce82ea
2016-12-22ThreadContext: Move from "core" to "arm_interface".bunnei8-37/+26
2016-12-22core: Replace "AppCore" nomenclature with just "CPU".bunnei11-105/+103
2016-12-22Address clang-format issues.bunnei8-49/+49
2016-12-22core: Remove HLE module, consolidate code & various cleanups.bunnei19-107/+94
2016-12-22core: Consolidate core and system state, remove system module & cleanups.bunnei22-336/+284
2016-12-22file_util: Remove unused paths.bunnei3-87/+3
2016-12-22core: Consolidate top-level system state into a singleton.bunnei8-103/+164
2016-12-22loader: Remove duplicate docstrings.bunnei3-56/+0
2016-12-21citra-qt: Move graphics debugging code into its own folderLioncash17-32/+32
Keeps all graphics debugging stuff from cluttering up the root debugger folder
2016-12-21disassembler: Remove mutable specifier from breakpoints member variableLioncash1-3/+1
Breakpoints has been const correct with regards to what the DisassmblerModel needs for quite a while now.
2016-12-19citra-qt: Move bits of constructor behavior to named functionsLioncash2-67/+100
Makes the initialization process a tad easier to grok, since the constructor isn't just a glob of random unrelated behaviors.
2016-12-19Use GL_TRUE when setting color_maskAlbin Bernhardsson1-4/+4
2016-12-18line fixup for travis ciCaptV0rt3x1-1/+0
2016-12-18screen swap - Hotkey mappingVamsi Krishna2-5/+1
2016-12-18Fixed GPLv2 license text in the start.Vamsi Krishna1-1/+1
2016-12-18Fixed game_list focusing issue.Vamsi Krishna1-0/+1
added line render_window->setFocus();
2016-12-18Revert "Memory: Always flush whole pages from surface cache"bunnei1-10/+0
2016-12-17Thread: remove the thread from the thread list when exitingwwylele3-3/+15
2016-12-16Kernel: remove object's waiting thread if it is deadwwylele1-1/+2
2016-12-16gdbstub: const correctness changesLioncash1-9/+8
Also uses size_t as the length indicator type, as is common with buffers.
2016-12-16VideoCore/Shader: Extract DebugData out from UnitStateYuri Kunde Schlesner8-103/+99
2016-12-16Remove unnecessary castYuri Kunde Schlesner1-3/+1
2016-12-16VideoCore/Shader: Extract evaluate_condition lambda to function scopeYuri Kunde Schlesner1-26/+24
2016-12-16VideoCore/Shader: Extract call lambda up a scope and remove unused paramYuri Kunde Schlesner1-21/+17
2016-12-16VideoCore/Shader: Remove dynamic control flow in (Get)UniformOffsetYuri Kunde Schlesner2-18/+11
2016-12-16VideoCore/Shader: Move DebugData to a separate fileYuri Kunde Schlesner4-172/+189
2016-12-15FS: fix debug build from #2249wwylele1-11/+9
2016-12-15gdbstub: Remove global variable from public interfaceLioncash5-16/+23
Currently, this is only ever queried, so adding a function to check if the server is enabled is more sensible. If directly modifying this externally is ever desirable, it should be done by adding a function to the interface, rather than exposing implementation details directly.
2016-12-15hid: Get rid of a double -> float truncation warningLioncash1-1/+2
float literals need to have the 'f' prefix.
2016-12-15core: Add missing #pragma once directives where applicableLioncash3-0/+6
2016-12-15act: Fix docstring typoLioncash1-1/+1
These aren't the AM services.
2016-12-15main: Open folder when open save folder location context menu is clickedMerryMage2-0/+20
2016-12-15game_list: Implement context menu for items in listMerryMage3-4/+32
* Add a context menu with a "Open Save Data Location" action
2016-12-15loader: Implement ReadProgramIdMerryMage3-0/+28
2016-12-15shader_jit_x64: Use LOOPCOUNT_REG as a 64-bit reg when indexingYuri Kunde Schlesner1-1/+1
2016-12-15archive_source_sd_savedata: Add static method to get a specific save data pathMerryMage2-0/+7
2016-12-15Memory: Always flush whole pages from surface cacheYuri Kunde Schlesner1-0/+10
This prevents individual writes touching a cached page, but which don't overlap the surface, from constantly hitting the surface cache lookup.
2016-12-15Service/CECD: Add cecd:ndm servicemailwl8-13/+81
2016-12-15VideoCore: Make profiling scope more representativeYuri Kunde Schlesner2-0/+15
2016-12-15VideoCore: Inline IsPicaTracingYuri Kunde Schlesner3-16/+15
Speeds up ALBW main menu slightly (~3%)
2016-12-15VideoCore: Eliminate an unnecessary copy in the drawcall loopYuri Kunde Schlesner3-5/+3
2016-12-15shader_jit_x64: Use Reg32 for LOOP* registers, eliminating castsYuri Kunde Schlesner1-16/+16
2016-12-15VideoCore: Convert x64 shader JIT to use Xbyak for assemblyYuri Kunde Schlesner6-224/+462
2016-12-14Fixed the codestyle to match our clang-format rules.Subv16-68/+108
2016-12-14Fixed the codestyle to match our clang-format rules.Subv4-28/+41
2016-12-14Service/ACT: move ACT services to foldermailwl8-10/+44
2016-12-13Modularized Qt and SDL file copyingfreiro2-9/+8
Now cmake relies on two submodules to copy the libraries in the proper folders
2016-12-13Common: Fix gcc build on macOSJeffrey Pfau1-0/+11
2016-12-13Minor amendment of GSP_GPU::ImportDisplayCaptureInfo codeJamePeng1-3/+5
2016-12-13time_stretch: Add missing #pragma once directiveLioncash1-0/+2
2016-12-12csnd:SND reformat source codemailwl4-49/+94
2016-12-11APT::GetStartupArgument: force clear startup argumentmailwl2-5/+11
2016-12-11Modularization of copy_msvc_libraries cmake functfreiro1-20/+2
Created a new folder in Citra's root called CMakeModules that should contain cmake functions used by the various CMakeLists.txt.
2016-12-11citra-qt: Make constructors explicit where applicableLioncash15-32/+35
2016-12-11Removed redundant Qt check and other fixesfreiro1-20/+19
This removes a redundant check and moves part of the code to a separate function.
2016-12-11citra-qt: Add missing #pragma once directivesLioncash5-0/+10
2016-12-11game_list: Make slots private functionsLioncash1-7/+4
The new Qt event syntax allows for regular member functions to be used in connect(), so explicitly indicating slots isn't necessary.
2016-12-11game_list: Make the constructor explicitLioncash1-1/+1
2016-12-11game_list: Make the AddEntry argument a const referenceLioncash2-2/+2
appendRow takes a QList by const reference, so it doesn't need to be modifiable.
2016-12-11game_list: Replace 0 literals with nullptrLioncash1-1/+1
2016-12-11game_list: Use QT5's new event connection syntaxLioncash1-6/+6
Makes for more compact code in most places.
2016-12-11game_list: Pass the parent constructor argument to the QWidget base classLioncash1-1/+1
If the control was ever passed an explicit parent, a potential memory leak would happen, as the game list wouldn't be freed. However, in our case, the game list was placed within a layout, which automatically performs reparenting, avoiding this issue.
2016-12-11[MSVC] Copy SDL2.dll to build folderfreiro1-20/+20
CMake now copies SDL2.dll when compiling citra with citra-qt as a target on MSVC.
2016-12-11graphics_cmdlists: Get rid of variable shadowingLioncash1-14/+18
2016-12-11Core: Add a forgotten #include <cstring> for memcpy.Emmanuel Gil Peyrot1-0/+1
2016-12-11graphics_cmdlists: Get rid of an unused variableLioncash1-1/+0
2016-12-11graphics_cmdlists: Make LoadTexture and TextureInfoWidget src arguments constLioncash1-3/+4
2016-12-11graphics_cmdlists: Make LoadImage internally linkedLioncash1-0/+2
Puts the TextureInfoWidget definition in the anonymous namespace as well, as it's only used in the translation unit as well.
2016-12-11Add all services to the Service namespaceLioncash50-499/+408
Previously there was a split where some of the services were in the Service namespace and others were not.
2016-12-11configure_input: Modernize and cleanup input configuration tabMerryMage2-115/+101
* Removed use of raw QTimer* pointer. * Update to use type-safe QObject::connect. * getKeyName can be a static local function. * Prefer to use function arguments instead of member variables. * Store Qt::Key instead of converting string back into keycode.
2016-12-10Properly remove a thread from its wait_objects' waitlist when it is awoken by a timeout.Subv3-2/+11
2016-12-10audio_core: SelectSink should default to auto if sink_id is invalidMerryMage1-12/+7
2016-12-09Moved the HLE command buffer translation task to ServerSession instead of the HLE handler superclass.Subv6-47/+38
2016-12-09Kernel/IPC: Small codestyle cleanupSubv2-3/+1
2016-12-09WaitSynch: Removed unused variables and reduced SharedPtr copies.Subv5-74/+57
Define a variable with the value of the sync timeout error code. Use a boost::flat_map instead of an unordered_map to hold the equivalence of objects and wait indices in a WaitSynchN call.
2016-12-09service: Add cfg:nor serviceLioncash4-0/+49
2016-12-09ptm: Use boolean instead of integral valueLioncash1-1/+1
The third parameter of Write is actually a bool type, not an int.
2016-12-09service: Drop '_Interface' from cfg service namesLioncash7-12/+12
2016-12-08Fixed the gpu command list size when creating CiTraces.Subv1-2/+2
2016-12-08Added a framework for partially handling Session disconnections.Subv8-9/+67
Further implementation will happen in a future commit. Fixes a regression.
2016-12-08Use std::move where appropriate.Subv12-177/+187
2016-12-08service: Add the ptm:s serviceLioncash3-0/+14
3dbrew documents this as being the exact same as ptm:sysm
2016-12-08service: Add common ptm:u commands to other ptm servicesLioncash4-0/+54
3dbrew indicates that all services have access to these commands except for ptm:sets.
2016-12-08service: Drop '_Interface' in ptm service class namesLioncash7-14/+14
Inheriting from Service::Interface makes this obvious.
2016-12-08service: Add ptm::gets and ptm::sets servicesLioncash6-0/+90
2016-12-08service: Add mvd and qtm servicesLioncash14-0/+271
Adds the two New3DS-only modules. 3dbrew was used for command information.
2016-12-08service: Add nfc servicesLioncash8-30/+199
3dbrew was used for the command information.
2016-12-08ssl_c: Update function tableLioncash1-0/+3
Updated based off information from 3dbrew
2016-12-08ptm: Update ptm_sysm function tableLioncash3-6/+7
Updated based off information from 3dbrew.
2016-12-08pm_app: Update function tableLioncash1-6/+9
Updated based off information from 3dbrew.
2016-12-08nwm_uds: Update function tableLioncash1-5/+7
Updated based off information from 3dbrew.
2016-12-08nim: Update function tablesLioncash2-0/+2
Updated based off information from 3dbrew.
2016-12-08http_c: Update function tableLioncash1-0/+4
Updated based off information from 3dbrew.
2016-12-08gsp_lcd: Update function tableLioncash1-0/+4
Updated based off information from 3dbrew.
2016-12-08fs_user: Update function tableLioncash1-0/+2
Updated based off information from 3dbrew.
2016-12-08dlp_srvr: Update function tableLioncash1-0/+7
2016-12-08cfg: Update function tablesLioncash3-0/+3
Updated based off information from 3dbrew
2016-12-08cecd_u: Update function tableLioncash1-1/+13
Updated based off information from 3dbrew.
2016-12-08boss_p: Update function tableLioncash1-3/+68
2016-12-08act: Update function tablesLioncash2-0/+10
Updated based off information from 3dbrew.
2016-12-08apt: Update apt function tablesLioncash2-7/+73
Updated based off information from 3dbrew.
2016-12-08Update AM service function tablesLioncash6-113/+246
Updated based off information from 3dbrew.
2016-12-07file_sys: Make a few single-argument constructors explicitLioncash8-10/+10
Prevents implicit conversions.
2016-12-07applet: Move common IsRunning underlying variable to the Applet classLioncash8-28/+19
Gets rid of basic duplication.
2016-12-07applet: Make virtual destructor defaultedLioncash1-1/+1
2016-12-07applet: Make constructor protectedLioncash1-1/+2
Considering the class is abstract, there's no need to make the constructor public.
2016-12-07OpenGL: Drop framebuffer completeness check.Markus Wick5-47/+8
This OpenGL call synchronize the worker thread of the nvidia blob. It can be verified on linux with the __GL_THREADED_OPTIMIZATIONS=1 environment variable. Those errors should not happen on tested drivers. It was used as a workaround for https://bugs.freedesktop.org/show_bug.cgi?id=94148
2016-12-07Config: auto-select region and languagewwylele11-7/+108
2016-12-07tests: add missing libcore dependency after 75ee2f8c6702Jan Beich1-1/+1
$ (cmake -DENABLE_SDL2:BOOL=false /path/to/citra; gmake) [...] [ 85%] Linking CXX executable tests ../common/libcommon.a(microprofile.cpp.o): In function `MicroProfileThreadStart(pthread**, void* (*)(void*))': src/common/microprofile.cpp:(.text+0x41): undefined reference to `pthread_create' c++: error: linker command failed with exit code 1 (use -v to see invocation)
2016-12-07Use boost remove_erase_if instead of the erase-remove idiomSubv1-2/+3
2016-12-07Improved the algorithm for GetHighestPriorityReadyThread.Subv1-14/+13
2016-12-06Implement Frame rate limiter (#2223)emmauss10-0/+54
* implement frame limiter * fixes
2016-12-05ASSERT that shader was linked successfullyJannik Vogel1-0/+2
2016-12-05Report shader uniform block size in case of mismatchJannik Vogel1-1/+3
2016-12-05Print broken shader code to logJannik Vogel1-3/+9
2016-12-05Return an error code when connecting to a saturated port.Subv5-7/+20
The error code was taken from the 3DS kernel.
2016-12-05HLE: Use a member variable instead of a virtual function to retrieve the max number of sessions that can be connected to an HLE service at the same time.Subv5-8/+18
2016-12-05gdbstub: Remove unused includeJannik Vogel1-1/+0
2016-12-05Unify Windows ICON resource nameJannik Vogel2-2/+2
2016-12-05Support mingw cross-compileJannik Vogel9-9/+11
2016-12-05Split SessionRequestHandler::HandleSyncRequest into HandleSyncRequest, TranslateRequest and HandleSyncRequestImpl.Subv6-22/+59
HandleSyncRequest now takes care of calling the command buffer translate function before actually invoking the command handler for HLE services.
2016-12-05Kernel: Remove the Redirection handle type.Subv1-2/+0
2016-12-05KServerPorts now have an HLE handler "template", which is inherited by all ServerSessions created from it.Subv12-69/+86
2016-12-04Threading: Added some utility functions and const correctness.Subv4-16/+36
2016-12-04GSP: Downgrade log severity of SetAxiConfigQoSModeYuri Kunde Schlesner1-1/+1
This function doesn't need to do anything for HLE and some games call it quite often, spamming up the logs.
2016-12-04OpenGL: Non-zero stride only makes sense for linear buffersYuri Kunde Schlesner3-7/+11
2016-12-04OpenGL: Ensure framebuffer binding is restored if completion check failsYuri Kunde Schlesner1-10/+7
2016-12-04OpenGL: Fix DisplayTransfer accel when input width != output widthYuri Kunde Schlesner1-1/+10
Fixes #2246, #2261
2016-12-04Threading: Reworked the way our scheduler works.Subv8-190/+180
Threads will now be awakened when the objects they're waiting on are signaled, instead of repeating the WaitSynchronization call every now and then. The scheduler is now called once after every SVC call, and once after a thread is awakened from sleep by its timeout callback. This new implementation is based off reverse-engineering of the real kernel. See https://gist.github.com/Subv/02f29bd9f1e5deb7aceea1e8f019c8f4 for a more detailed description of how the real kernel handles rescheduling.
2016-12-04shader_jit: Fix non-SSE4.1 path where FLR would not truncateJannik Vogel1-1/+1
2016-12-03clang-format: Fix coding styleYuri Kunde Schlesner1-1/+1
2016-12-03Declare empty ServerSession and ClientSession constructors as default.Subv2-4/+4
2016-12-02shader_jit: Load LOOPCOUNT_REG and LOOPINC 4 bit left-shiftedJannik Vogel1-6/+9
2016-12-01Threads do not wait for the server endpoint to call AcceptSession before returning from a ConnectToPort or GetServiceHandle call.Subv2-3/+5
2016-12-01Remove unused version.hJannik Vogel2-12/+0
2016-12-01Fixed the rebase mistakes.Subv11-83/+76
2016-12-01A bit of a redesign.Subv13-263/+266
Sessions and Ports are now detached from each other. HLE services are handled by means of a SessionRequestHandler class, Interface now inherits from this class. The File and Directory classes are no longer kernel objects, but SessionRequestHandlers instead, bound to a ServerSession when requested. File::OpenLinkFile now creates a new session pair and binds the File instance to it.
2016-12-01IPC/HLE: Associate the ClientSessions with their parent port's HLE interface if it exists.Subv6-26/+21
Pass the triggering ServerSession to the HLE command handler to differentiate which session caused the request.
2016-12-01Kernel/HLE: Service::Interface no longer inherits from any Kernel object, and is now its own standalone class.Subv4-24/+52
Interface is now used by aggregation in ClientPort, to forward service commands to their HLE implementation if needed.
2016-12-01fixup! Kernel/IPC: Use Ports and Sessions as the fundamental building block of Inter Process Communication.Subv4-5/+6
2016-12-01 Kernel/IPC: Use Ports and Sessions as the fundamental building block of Inter Process Communication.Subv16-88/+314
All handles obtained via srv::GetServiceHandle or svcConnectToPort are references to ClientSessions. Service modules will wait on the counterpart of those ClientSessions (Called ServerSessions) using svcReplyAndReceive or svcWaitSynchronization[1|N], and will be awoken when a SyncRequest is performed. HLE Interfaces are now ClientPorts which override the HandleSyncRequest virtual member function to perform command handling immediately.
2016-11-30WINVER definition moved to CMake and cleanupfreiro1-3/+0
2016-11-30ClangFormat: Fixed the clang-format errorsSubv2-6/+10
2016-11-30Set client SDK version to Service APIsmailwl8-16/+88
2016-11-29Build: Fixed a few warnings.Subv3-11/+11
2016-11-29FileSys: Implement OtherSaveDatawwylele7-0/+214
2016-11-29FS: add missing MediaTypewwylele1-1/+1
2016-11-29FileSys: abstract SD save data archive sourcewwylele6-79/+136
2016-11-28Kernel/Loader: Grab the system mode from the NCCH ExHeader.Subv5-27/+27
3dsx and elf files default to system mode 2 (96MB allocated to the application). This allows Home Menu to boot without modifications. Closes #1849
2016-11-27GPU: Remove the broken frame_skip option.Emmanuel Gil Peyrot7-33/+1
Fixes #1960.
2016-11-27RasterizerGL: Use GL_TRUE and 0xFF in the stencil and depth masks instead of simply true and -1Subv2-4/+4
2016-11-27Rasterizer/Memfill: Set the correct stencil write mask when clearing the stencil buffer.Subv1-1/+1
2016-11-26Move to AppData/Roaming/Citra/freiro1-1/+1
2016-11-26dynarmic: Add ticks based on ticks executed, not ticks requestedMerryMage1-2/+2
2016-11-26Removed /user/ from pathfreiro1-2/+1
2016-11-25Output parameters to logmailwl1-4/+6
2016-11-25MIC_U: Stub service funcionsmailwl4-16/+307
2016-11-25Expose page table to dynarmic for optimized reads and writes to the JITJames Rowe3-6/+18
2016-11-24Switch to AppData/Roamingfreiro2-4/+4
2016-11-24Cache Vertices instead of Output registers (#2165)jphalimi1-6/+7
This patch brings +3% performance improvement on average. It removes ToVertex() as an important hotspot of the emulator.
2016-11-24Bravely Default/Second stuck #1822 (#2188)pippo29314-2/+22
* Bravely Default/Second stuck #1822 CancelLibraryApplet stub * Log parameter. * Taking care of comments * Sync with 3DBrew * White space ? * lower case
2016-11-22Fix format error from #2195wwylele1-1/+1
2016-11-22Improve verbosity of audio errors with SDL_GetError()freiro1-2/+2
2016-11-20Kernel/Loader: Grab the system mode from the NCCH ExHeader.Subv10-22/+67
3dsx and elf files default to system mode 2 (96MB allocated to the application). This allows Home Menu to boot without modifications. Closes #1849
2016-11-20GPU/CiTrace: Avoid calling GetTextures() when not necessary.Subv1-6/+5
2016-11-19Minor formatting changeJames Rowe1-1/+1
2016-11-19Kernel/Events: Log an error when trying to create Pulse events and timers.Subv2-0/+10
Related to #1904
2016-11-19APT/Applets: Renamed the members of the SignalType enum.Subv5-16/+27
Names now make sense and match 3dbrew.
2016-11-19tests: add a work-around for macOS linking errorwwylele2-0/+15
2016-11-19FileSys: rename SaveDataCheck archive to NCCH archivewwylele5-23/+22
According to the observation from game and 3dbrew "Used for accessing general NCCH data"
2016-11-19FileSys: remove unused DiskArchivewwylele2-179/+0
All "subclasses" of DiskArchive are splitted out. This class is useless
2016-11-19PTM & CFG: use the correct path and error code according to the new FileSys policywwylele2-5/+6
2016-11-19FileSys: w->rw permission lift only happens in SDMC archivewwylele4-2/+14
2016-11-19FileSys: add SDMCWriteOnlyArchivewwylele6-0/+140
2016-11-19FileSys: add SDMCArchivewwylele3-1/+301
Now DiskArchive only serves for SDMC, then it should be just a "SDMCArchive"
2016-11-19FileSys: add ExtSaveDataArchivewwylele2-1/+115
ExtSaveData is more similar to SaveData, so let it be a subclass of SaveData
2016-11-19FileSys: add SaveDataArchivewwylele7-4/+368
The error checking of SaveDataArchive is completely different from DiskArchive, so it has to be a new class instead of a subclass of DiskArchive.
2016-11-19FileSys: remove Open from FileBackendwwylele4-64/+44
Same as directory, file shouldn't expose Open either.
2016-11-19FileSys: remove Open from DirectoryBackendwwylele4-25/+5
Open should not be an interface exposed by Directory because it is the Archive thats implement the methed to open the directory. The service API of 3DS also implies this - Open is not a function of directory service, but is of FS main service
2016-11-19FileSys: add PathParserwwylele5-0/+200
2016-11-19Return by value and other fixesfreiro2-14/+8
2016-11-19Win32 move default user folder location to AppDatafreiro2-0/+24
2016-11-17cfg: add config block 0x00090000wwylele1-2/+8
2016-11-14Add mingw compile supportJames Rowe3-3/+8
2016-11-12Round the rectangle size to prevent float to int casting issuesJames Rowe3-8/+9
And other minor style changes
2016-11-11Minor Menu FixesPringo2-2/+2
2016-11-05Add default hotkey to swap primary screens.James Rowe10-13/+27
Also minor style changes
2016-11-05Rework frame layouts to use a max rectangle instead of hardcoded calculationsJames Rowe2-250/+100
2016-11-05LargeFrameLayout + SwappedSonofUgly1-50/+36
Make small screen stay at 1x, and large screen maintain its aspect ratio.
2016-11-05Support additional screen layouts.James Rowe16-127/+517
Allows users to choose a single screen layout or a large screen layout. Adds a configuration option to change the prominent screen.
2016-11-02Style fixmailwl1-2/+2
2016-11-02Rename AcConfig, change types u8 to u32mailwl1-21/+25
2016-11-02AC_U: Stub functions, used if EULA agreedmailwl2-14/+190
2016-11-01FileSys: make Archive interfaces return error codewwylele6-87/+91
and make the mode parameter a reference since it is a BitField union
2016-10-28Small fix to let IDA see target.xmlmailwl1-1/+1
2016-10-28build: add default install for DragonFly, Solaris, etc.Jan Beich2-2/+2
2016-10-28core: some errno values are uncommon on UnixJan Beich1-0/+8
src/core/hle/service/soc_u.cpp:107:6: error: 'ENODATA' was not declared in this scope {ENODATA, 43}, ^ src/core/hle/service/soc_u.cpp:117:6: error: 'ENOSR' was not declared in this scope {ENOSR, 53}, ^ src/core/hle/service/soc_u.cpp:118:6: error: 'ENOSTR' was not declared in this scope {ENOSTR, 54}, ^ src/core/hle/service/soc_u.cpp:139:6: error: 'ETIME' was not declared in this scope {ETIME, 75}, ^
2016-10-28common: use system bswap* functions on more BSDsJan Beich1-2/+5
2016-10-28common: use system CPUID routine on DragonFly as wellJan Beich1-2/+2
2016-10-28common: some FreeBSD headers are incomplete to avoid namespace pollutionJan Beich1-1/+3
In file included from src/common/x64/cpu_detect.cpp:16: /usr/include/machine/cpufunc.h:66:17: error: unknown type name 'u_int' static __inline u_int ^ /usr/include/machine/cpufunc.h:67:6: error: unknown type name 'u_int' bsfl(u_int mask) ^ /usr/include/machine/cpufunc.h:69:2: error: unknown type name 'u_int' u_int result; ^ /usr/include/machine/cpufunc.h:75:17: error: unknown type name 'u_long'; did you mean 'long'? static __inline u_long ^ /usr/include/machine/cpufunc.h:76:6: error: unknown type name 'u_long'; did you mean 'long'? bsfq(u_long mask) ^ /usr/include/machine/cpufunc.h:78:2: error: use of undeclared identifier 'u_long'; did you mean 'long'? u_long result; ^ [...]
2016-10-28common: convert to standard stat()/fstat() interfacesAnthony J. Bentley1-15/+10
Most modern Unix environments use 64-bit off_t by default: OpenBSD, FreeBSD, OS X, and Linux libc implementations such as Musl. glibc is the lone exception; it can default to 32 bits but this is configurable by setting _FILE_OFFSET_BITS. Avoiding the stat64()/fstat64() interfaces is desirable because they are nonstandard and not implemented on many systems (including OpenBSD and FreeBSD), and using 64 bits for stat()/fstat() is either the default or trivial to set up.
2016-10-28common: stat64 is non-standard, hide on a random UnixJan Beich1-1/+1
src/common/file_util.cpp:79:19: error: variable has incomplete type 'struct stat64' struct stat64 file_info; ^ src/common/file_util.cpp:79:12: note: forward declaration of 'stat64' struct stat64 file_info; ^ src/common/file_util.cpp:99:19: error: variable has incomplete type 'struct stat64' struct stat64 file_info; ^ src/common/file_util.cpp:99:12: note: forward declaration of 'stat64' struct stat64 file_info; ^ src/common/file_util.cpp:342:19: error: variable has incomplete type 'struct stat64' struct stat64 buf; ^ src/common/file_util.cpp:342:12: note: forward declaration of 'stat64' struct stat64 buf; ^ src/common/file_util.cpp:359:19: error: variable has incomplete type 'struct stat64' struct stat64 buf; ^ src/common/file_util.cpp:359:12: note: forward declaration of 'stat64' struct stat64 buf; ^ 4 errors generated.
2016-10-28common: only FreeBSD has thread affinity compatible with LinuxJan Beich1-1/+5
src/common/thread.cpp:90:5: error: unknown type name 'cpu_set_t'; did you mean 'cpuset_t'? cpu_set_t cpu_set; ^~~~~~~~~ cpuset_t /usr/include/sys/_cpuset.h:48:24: note: 'cpuset_t' declared here typedef struct _cpuset cpuset_t; ^ 1 error generated.
2016-10-28common: define routines to set thread name on more BSDsJan Beich1-2/+4
src/common/thread.cpp:123:5: error: use of undeclared identifier 'pthread_setname_np' pthread_setname_np(pthread_self(), szThreadName); ^ 1 error generated.
2016-10-25FRD: fix GetMyFriendKeymailwl1-1/+1
2016-10-20Fix typosRicardo de Almeida Gonzaga13-16/+16
2016-10-12NWM: stub Initialize with an errorwwylele1-0/+11
2016-10-06Rework the code of err:f serviceJamePeng1-118/+198
2016-10-02Update the stub code of BOSSJamePeng5-4/+1810
2016-10-02fs: clean up log formatwwylele1-22/+24
2016-10-02fs: implement DeleteDirectoryRecursivelywwylele8-1/+70
2016-09-30VideoCore: Shader interpreter cleanupsYuri Kunde Schlesner1-32/+42
2016-09-30Common: Remove dangerous Vec[234] array constructorsYuri Kunde Schlesner1-3/+0
They're not currently used, and it's easy to accidentally pass a single pointer argument to them, causing an out-of-bounds read.
2016-09-30VideoCore: Fix out-of-bounds read in ShaderSetup::ProduceDebugInfoYuri Kunde Schlesner1-3/+1
As far as I can tell, memset was replaced by a fill without correcting the parameter type, causing an out-of-bounds array read in the Vec4 constructor.
2016-09-30OpenGL: Take cached viewport sub-rect into account for scissorYuri Kunde Schlesner3-29/+25
Fixes #1938
2016-09-29gpu: DisplayTransfer: a less amazing algorithm for flipwwylele1-8/+11
the old implementation modifies the loop variable in the loop. Though it actually works, it is really confusing. Makes it morereadable now.
2016-09-29gpu: keep the old signal strategy for null pointerwwylele1-4/+8
previous commits changes the behaviour of interrupt when meeting invalid params. Regresses to the same behaviour as before needs more hwtest
2016-09-29gpu: add validity check for TextureCopy, DisplayTransfer and FillMemorywwylele1-6/+88
prevent further operation with invalid values which may cause assertion failure or divided by zero. needs more hwtest
2016-09-29memory: fix IsValidVirtualAddress for RasterizerCachedMemorywwylele1-0/+3
RasterizerCachedMemory doesn't has pointer but should be considered as valid
2016-09-29gpu: move MemoryFill, TextureCopy and DisplayTransfer into functionswwylele1-247/+249
The old code indented too much to read. Split into functions and do general cleanup.
2016-09-29rasterizer: separate TextureCopy from DisplayTransferwwylele3-6/+12
2016-09-22qt: shutdown system if errorwwylele1-2/+3
2016-09-22move ResetType to kernel.hwwylele3-7/+6
2016-09-22name objectswwylele1-0/+4
2016-09-22implement wait tree widgetwwylele9-0/+636
2016-09-21Remove special rules for Windows.h and library includesYuri Kunde Schlesner6-10/+8
2016-09-21Use negative priorities to avoid special-casing the self-includeYuri Kunde Schlesner164-168/+170
2016-09-21Remove empty newlines in #include blocks.Emmanuel Gil Peyrot289-731/+214
This makes clang-format useful on those. Also add a bunch of forgotten transitive includes, which otherwise prevented compilation.
2016-09-19Manually tweak source formatting and then re-run clang-formatYuri Kunde Schlesner169-812/+808
2016-09-19Tweak formatting settingsYuri Kunde Schlesner1-4/+3
2016-09-18Sources: Run clang-format on everything.Emmanuel Gil Peyrot386-17707/+19187
2016-09-18Dyncom: Disable clang-format on the decoding table.Emmanuel Gil Peyrot1-0/+3
2016-09-18Sources: Add a .clang-format configuration file.Emmanuel Gil Peyrot1-0/+89
2016-09-16VideoCore: Fix dangling lambda context in shader interpreterYuri Kunde Schlesner1-1/+1
The static meant that after the first execution, these lambda context would be pointing to a random location on the stack. Fixes a random crash when using the interpreter.
2016-09-15arm_dynarmic: Implement GetVFPSystemReg/SetVFPSystemReg.bunnei1-5/+12
2016-09-15microprofile: Double buffer size to 16MB.bunnei1-1/+1
2016-09-15arm: ResetContext shouldn't be part of ARM_Interface.bunnei6-30/+17
2016-09-15arm_dynarmic/arm_dyncom: Remove unnecessary "virtual" keyword.bunnei2-2/+2
2016-09-15dyncom: Use VFP_FPSCR/VFP_FPEXC.bunnei1-4/+4
2016-09-15qt: Add UI configuration option to enable CPU JIT.bunnei2-0/+25
2016-09-15core: Add configuration option for CPU JIT.bunnei5-7/+20
2016-09-15dynarmic: Implement ARM CPU interface.bunnei3-0/+233
2016-09-13Common: readdir_r() is deprecated, switch to readdir().Emmanuel Gil Peyrot1-6/+2
2016-09-13Qt: fix birthday combo box updatingwwylele1-2/+3
2016-09-07audio_core: Tweak audio latencyMerryMage2-2/+2
2016-09-03codec: Fix ADPCM distortion caused by incorrect nibble orderfincs1-2/+2
Closes #2049. Signed-off-by: MerryMage <MerryMage@users.noreply.github.com>
2016-09-02Qt: unify running detectionwwylele5-12/+9
2016-09-01qt: Rename all "toogle" to "toggle".bunnei6-24/+24
2016-08-31configure_audio: User-configuratble option to enable/disable audio stretchingMerryMage7-0/+24
2016-08-31audio_core: Add EnableStretching to interface so that one can toggle stretching on and offMerryMage4-9/+52
2016-08-31sink: Change EnqueueSamples to take a pointer to a buffer instead of a std::vectorMerryMage5-9/+9
2016-08-30OpenGL: Avoid error on unsupported lighting LUTJannik Vogel1-0/+1
2016-08-30qt: Add an option to settings for enabling V-Sync.bunnei1-0/+4
2016-08-30qt: Recreate GL context on startup to support changing V-Sync.bunnei3-25/+39
2016-08-30system: Add a function to see if the emulator is running.bunnei2-0/+11
2016-08-30config: Add a setting for graphics V-Sync.bunnei9-1/+20
2016-08-30qt: Add a configuration tab for Graphics and move relevant fields.bunnei8-48/+169
2016-08-27LDR: Implement CROwwylele9-99/+3013
2016-08-27ARM: add ClearInstructionCache functionwwylele3-0/+11
2016-08-27Memory: add ReadCString functionwwylele2-0/+17
2016-08-27Auto-detect original shared_font.bin memory baseYuri Kunde Schlesner3-30/+68
This allows a file dumped from either an o3DS or a n3DS (and potentially even an original unrebased file) to be used.
2016-08-22dyncom: Read-after-write in SMLAMerryMage1-2/+4
In the case when RD === RN, RD was updated before AddOverflow was called to check for an overflow, resulting in an incorrect state of the Q flag.
2016-08-16citra: Default to HW renderer.bunnei3-4/+4
2016-08-14Dyncom: Correct implementation of STM for R15MerryMage1-3/+4
2016-08-02fix #1942 and adds a few IPC functions for descriptorsLectem5-22/+110
2016-07-29Input GUI: Add tab to remap controls (#1900)Anon9-8/+825
2016-07-28Instead of segfaulting, log an error to remind the user to dump the shared font fileHenrik Rydgard1-0/+7
2016-07-28dyncom: Fix translation of thumb REVSHMerryMage1-4/+13
2016-07-23Protection against a resize of size 0Alexandre LittleWhite Laurent1-4/+3
2016-07-23CoreTiming: avoid overflowwwylele1-1/+1
2016-07-23HLE: implement system timewwylele2-2/+60
2016-07-21CMake: Fix Info.plist template for citra_qt/OSXDale Whinham1-1/+1
The Info.plist template incorrectly uses parentheses instead of curly braces, which means that building the .app bundle using regular 'make' results in the variable not being replaced, and hence the app bundle won't start because the executable name is incorrect. This commit fixes this issue.
2016-07-15Correct APT::0x00550040 and APT::0x00560000 functionJamePeng5-22/+31
2016-07-10Qt: add system settings config tabwwylele8-4/+450
2016-07-04Fix the errorcode of archive handleJamePeng2-10/+15
2016-07-04HLE/Applets: Implement ErrEula appletmailwl5-0/+118
2016-07-03HLE/FS: Document some command parameters and implemented command 0x08560240 (CreateLegacySystemSaveData)Subv1-11/+42
2016-07-03Service::CFG/FS: add and refactor out utilities for front-endwwylele4-15/+146
2016-07-03Service::CFG: move known block ID to an enumwwylele1-11/+25
2016-07-03Service::CFG: add SetConfigInfoBlk4wwylele4-8/+73
2016-07-02Service::CFG: add missing languagewwylele1-1/+2
2016-07-02Service::CFG: name sound output modeswwylele2-2/+7
2016-06-30Result: fix and update ErrorModulewwylele1-6/+19
2016-06-28OpenGL: Add scaled resolution support to scissorYuri Kunde Schlesner4-3/+16
2016-06-28PICA: Scissor fixes and cleanupsYuri Kunde Schlesner5-45/+39
2016-06-28PICA: Implement scissor testSubv5-3/+105
2016-06-25Remove superfluous std::move in return std::move(local_var)scurest2-2/+2
2016-06-19Fix recursive scanning of directoriesYuri Kunde Schlesner3-22/+15
ForeachDirectoryEntry didn't actually do anything with the `recursive` parameter, and the corresponding callback parameter was shadowing the actual recursion counters in the user functions.
2016-06-19Qt: Fix MicroProfile dpi scalingYuri Kunde Schlesner1-7/+6
2016-06-12Make arm_dyncom_trans* into a fully fledged compilation unitarchshift4-53/+73
2016-06-12arm_dyncom_interpreter: slightly change AllocBuffer to be intuitivearchshift1-15/+15
2016-06-11Kernel/SVC: Implemented svcCreatePort.Subv6-3/+41
2016-06-11hid: add missing headerwwylele1-0/+2
2016-06-11arm_dyncom_interpreter: Add specialized GetAddressingOpLoadStoreT funcarchshift2-39/+19
This allows us to get the addressing operation for STRT, LDRT, STRBT, and LDRBT. We do this so that translation functions don't need to see the addressing ops directly.
2016-06-11arm_dyncom_interpreter: rename operation functions to fit style guidearchshift2-34/+34
2016-06-11arm_dyncom_interpreter: Rename anonymous enum to TransExtDataarchshift4-166/+164
2016-06-11arm_dyncom_interpreter.cpp: #include translation info from inc filesarchshift3-2648/+2652
2016-06-11SDL2: Add forgotten default config changes from 7129611e65096ba2cbe8266f6cb068a9b18981d8.Emmanuel Gil Peyrot1-1/+5
2016-06-11Revert "Split huge interpreter source file into translation info and interpreter (+ some tiny misc style fixes)"archshift5-2731/+2727
2016-06-09arm_dyncom_interpreter: rename operation functions to fit style guidearchshift2-42/+42
2016-06-09arm_dyncom_interpreter.cpp: Split by translation and interpreter logicarchshift5-2727/+2731
To facilitate the split, some small changes were made to names of various structures and functions.
2016-06-08gdbstub: E0 should be E00shinyquagsire231-1/+1
2016-06-08Fix boot_filename encode on WindowsLFsWang1-0/+22
2016-06-07OpenGL: Implement fogJannik Vogel5-7/+124
2016-06-07Rasterizer: Implement fogJannik Vogel1-21/+52
2016-06-07Pica: Add fog stateJannik Vogel3-14/+69
2016-06-07OpenGL: Avoid undefined behaviour for UNIFORM_BLOCK_DATA_SIZEJannik Vogel2-6/+8
2016-06-05Kernel: Added ClientPort and ServerPort classes.Subv6-2/+139
This is part of an ongoing effort to implement support for multiple processes.
2016-06-05service: Add other DLP servicesLioncash10-23/+150
Specifically, dlp::CLNT and dlp::FKCL Moves them to their own folder like with other services.
2016-06-04Thread: update timeout when rerunning WaitSynchwwylele1-0/+49
2016-06-02Remove unused and bitrotted "controller config" filesarchshift6-671/+0
2016-06-01gsp::gpu: Reset g_thread_id in UnregisterInterruptRelayQueuemailwl3-16/+23
2016-06-01AddFstEntriesToGameList - prevent loading a directoryLFsWang1-3/+3
2016-05-31Fix parameter name in EnableNotificationmailwl2-2/+6
2016-05-31Fix mistakes, add output header codesmailwl1-8/+24
2016-05-31remove ugly functionmailwl1-35/+3
2016-05-31srv: Update according 3dbrewmailwl1-15/+137
2016-05-30Switch context on the same thread if necessarywwylele1-2/+6
2016-05-28Memory: Handle RasterizerCachedMemory and RasterizerCachedSpecial page types in the memory block manipulation functions.Subv2-2/+60
2016-05-28Memory: Make ReadBlock and WriteBlock accept void pointers.Subv5-21/+19
2016-05-28SOC_U: Remove usage of GetPointerSubv1-27/+73
2016-05-28SSL_C: Remove use of Memory::GetPointerMerryMage1-4/+3
2016-05-28GSP_GPU: Remove use of Memory::GetPointerMerryMage1-33/+50
2016-05-28Memory: CopyBlockMerryMage2-2/+43
2016-05-28DSP_DSP: Remove use of Memory::GetPointerMerryMage1-7/+10
2016-05-28FS/Archive: Remove use of Memory::GetPointerMerryMage1-7/+14
2016-05-27common_funcs: Provide rotr and rotl for MSVCMerryMage1-12/+18
2016-05-26Memory: Added necessary headers and removed unnecessary headerMerryMage2-1/+2
2016-05-24New3DS: Minor style cleanup to #1520.bunnei4-6/+6
2016-05-23OpenGL: Set shader_dirty on lighting changesJannik Vogel1-0/+23
2016-05-23Pica: Name LightSrc.config registerJannik Vogel2-17/+15
2016-05-23Pica: Name lighting.config0 and .config1 registersJannik Vogel2-18/+18
2016-05-23OpenGL: Use uniforms for dist_atten_bias and dist_atten_scaleJannik Vogel3-8/+84
2016-05-21Loader: Split SMDH into its own header and import helpers from QGameListEmmanuel Gil Peyrot5-89/+149
Also rewrite Qt wrappers to use those.
2016-05-21CFG: Remove use of Memory::GetPointerMerryMage1-6/+10
2016-05-21APT: Remove use of Memory::GetPointerMerryMage5-35/+36
2016-05-21Kernel/Thread: Remove use of Memory::GetPointerMerryMage1-1/+1
2016-05-21Applets/swkdb: Remove use of Memory::GetPointerMerryMage1-1/+1
2016-05-21Memory: ZeroBlockMerryMage2-0/+39
2016-05-21FileSys/Path: Replace Memory::GetPointer with Memory::ReadBlockMerryMage1-6/+6
2016-05-21Debugger/Callstack: Replace Memory::GetPointer with Memory::IsValidVirtualAddressMerryMage1-1/+4
2016-05-21Memory: ReadBlock/WriteBlockMerryMage3-4/+81
2016-05-21Memory: IsValidVirtualAddress/IsValidPhysicalAddressMerryMage3-0/+26
2016-05-21CitraQt: Simplify the game list loader codeEmmanuel Gil Peyrot5-34/+18
2016-05-21Loader: Add a GetFileType method to get the type of a loaded fileEmmanuel Gil Peyrot4-0/+30
2016-05-21Loader, Frontends: Refactor loader creation and game loadingEmmanuel Gil Peyrot6-49/+37
This allows frontends to keep a single loader and use it multiple times e.g. for code loading and SMDH parsing.
2016-05-21Common: Make recursive FileUtil functions take a maximum recursionEmmanuel Gil Peyrot4-30/+43
Fixes #1115. Also improves the performances of DiskArchive’s directory implementation a lot, simply by not going through the entire tree instead of just listing the first level files. Thanks to JayRoxFox for rebasing this on current master!
2016-05-21SVC::WaitSynchronizationN: Reschedule at the endwwylele1-2/+3
2016-05-21Refactor Tev stage dumperJannik Vogel2-115/+114
2016-05-21Extend Tev stage dumperJannik Vogel1-14/+38
2016-05-20Config: Restore previously selected audio sink option (#1824)James Rowe1-3/+3
2016-05-19Tests: Run tests on CIMerryMage1-0/+2
2016-05-19tests: Infrastructure for unit testsMerryMage3-0/+24
2016-05-19DSP/HLE: Audio outputMerryMage1-0/+7
2016-05-19DSP/HLE: Implement mixer processingMerryMage5-11/+311
2016-05-19Config: Audio sink configuration (#1798)Maribel6-0/+134
2016-05-18Remove `exceptions` parameter from `normaliseround` VFP functionsJannik Vogel3-28/+57
2016-05-18Fix exception propagation for VFP single precisionJannik Vogel2-33/+38
2016-05-18Fix exception propagation for VFP double precisionJannik Vogel2-34/+39
2016-05-18Fix read-after-write in SMUAD, SMLAD, SMUSD, SMLSDJannik Vogel1-4/+8
2016-05-18Update ACT:U and create ACT:A (#1809)András Domonkos5-0/+56
* Update ACT_U * Create act_a.h * Create act_a.cpp * Add service ACT:A * Add ACT:A source and header * Fix wrong header
2016-05-17Set fpscr for new threadsJannik Vogel3-0/+6
2016-05-16Retrieve shader result from new OutputRegisters-typeJannik Vogel4-64/+81
2016-05-16Fix ftoi behaviourJannik Vogel2-22/+53
2016-05-16Respect fpscr in ftoizJannik Vogel2-4/+4
2016-05-16Disable VFP3 instructionsJannik Vogel1-0/+4
2016-05-16DSP_DSP: Remove GetHeadphoneStatus logspam (#1799)Maribel1-2/+2
2016-05-15fixup! fixup! Refactor input systemwwylele3-8/+8
2016-05-15fixup! Refactor input systemwwylele2-20/+24
2016-05-15implement circle pad modifierwwylele6-5/+37
2016-05-15Refactor input subsystemwwylele12-75/+279
2016-05-15AudioCore: Implement time stretcher (#1737)Maribel4-0/+219
* AudioCore: Implement time stretcher * fixup! AudioCore: Implement time stretcher * fixup! fixup! AudioCore: Implement time stretcher * fixup! fixup! fixup! AudioCore: Implement time stretcher * fixup! fixup! fixup! fixup! AudioCore: Implement time stretcher * fixup! fixup! fixup! fixup! fixup! AudioCore: Implement time stretcher
2016-05-14Memory: Fixed a regression caused by #1695 and #1689.Subv1-0/+3
Reserve enough space in the vector that holds the linear heap memory to prevent relocations of the backing memory when growing too much. Closes #1790
2016-05-14OpenGL: Only update depth uniforms if the depth changedJannik Vogel2-9/+22
2016-05-14OpenGL: value-initialize variables which cause uninitialised access otherwiseJannik Vogel1-2/+2
2016-05-13Use new shader-jit signature for interpreterJannik Vogel3-8/+8
2016-05-13Refactor access to state in shader-jitJannik Vogel4-24/+42
2016-05-13HLE/Applets: Give each applet its own block of heap memory, and use that when creating the framebuffer shared memory block.Subv5-5/+44
2016-05-13Kernel: Account for automatically-allocated shared memories in the amount of used linear heap memory.Subv1-0/+5
2016-05-13APT: Move the shared font loading and relocation functions to their own subdirectory services/apt/bcfnt.Subv4-66/+167
2016-05-13Kernel/SharedMemory: Log an error when Map fails.Subv1-1/+10
2016-05-13Kernel: Implemented shared memory permissions.Subv4-9/+50
2016-05-13APT: Implement relocating the shared font to its true address.Subv1-9/+74
2016-05-13Kernel/Memory: Remove the Shared Memory region from the legacy memory map.Subv1-1/+0
2016-05-13Kernel/SharedMemory: Properly implemented shared memory support.Subv10-118/+147
Applications can request the kernel to allocate a piece of the linear heap for them when creating a shared memory object. Shared memory areas are now properly mapped into the target processes when calling svcMapMemoryBlock. Removed the APT Shared Font hack as it is no longer needed.
2016-05-13Kernel/SVC: Fixed the register order for svcCreateMemoryBlock.Subv2-2/+3
R0 is used as the last parameter instead of R4.
2016-05-12OpenGL: Support blend equationJannik Vogel4-0/+31
2016-05-12Microprofile: DPI-aware drawingMerryMage1-4/+12
2016-05-12Move program_counter and call_stack from UnitState to interpreterJannik Vogel3-45/+42
2016-05-12Move default_attributes into Pica stateJannik Vogel5-5/+5
2016-05-11Turn ShaderSetup into structJannik Vogel5-58/+59
2016-05-11OpenGL: Implement texture type 3Jannik Vogel4-35/+67
2016-05-11Rasterizer: Implement texture type 3Jannik Vogel1-2/+27
2016-05-11Pica: Add tc0.w to OutputVertexJannik Vogel1-1/+2
2016-05-11Pica: Add texture type to stateJannik Vogel1-0/+10
2016-05-10gl_rasterizer: Fix compilation for debug buildsLioncash1-1/+1
2016-05-10gdbstub: Silence missing prototype warningsLioncash1-3/+3
2016-05-10OpenGL: Implement W-Buffers and fix depth-mappingJannik Vogel3-4/+23
2016-05-10Pica: Implement W-Buffer in SW rasterizerJannik Vogel4-11/+43
2016-05-09dyncom: Reset the context into user mode correctlyLioncash1-1/+1
The other mode was system mode.
2016-05-09source: Fix missing logging argumentsLioncash1-2/+2
Silences two warnings on OSX.
2016-05-09swap: Get rid of pointer casting for swapping structsLioncash1-5/+5
These shouldn't haphazardly convert types
2016-05-09swap: Get rid of undefined behavior in swapf and swapdLioncash1-14/+18
This isn't well-defined in C++.
2016-05-09swap: Remove unused methodsLioncash1-28/+0
Also gets rid of pointer data variants as this prevents the use of the regular swapping routines as unary predicates in std lib functions. They also cast to stricter alignment types, which is undefined behavior.
2016-05-09vertex_loader: Correct forward declaration of InputVertexLioncash1-1/+1
It's actually a struct, not a class.
2016-05-09vertex_loader: Provide an assertion for ensuring the loader has been setupLioncash2-0/+7
Also adds an assert to ensure that Setup is not called more than once during a VertexLoader's lifetime.
2016-05-09vertex_loader: Add constructors to facilitate immediate and two-step initializationLioncash2-2/+6
2016-05-09vertex_loader: initialize_num_total_attributes.Lioncash1-1/+1
Keeps the public API sane.
2016-05-09vertex_loader: Use std::array instead of raw C arraysLioncash1-6/+7
2016-05-09vertex_loader: Correct header orderingLioncash1-1/+1
2016-05-07fixup simple type conversions where possibleAlexander Laties14-45/+55
2016-05-07Kernel/Threading: Warn when a thread can be scheduled in the Syscore (Core 1).Subv3-0/+10
We do not currently implement any cores other than the AppCore (Core 0).
2016-05-07Kernel/Threads: Dynamically allocate the TLS region for threads in the BASE region of the linear heap.Subv5-28/+74
Each thread gets a 0x200-byte area from the 0x1000-sized page, when all 8 thread slots in a single page are used up, the kernel allocates a new page to hold another 8 entries. This is consistent with what the real kernel does.
2016-05-07HLE/Applets: Use the correct size for the framebuffer SharedMemory in the swkbd and MiiSelector applets.Subv5-23/+44
2016-05-07AudioCore: SDL2 SinkMerryMage8-3/+179
2016-05-07citra_qt: Replace 'Pica Framebuffer Debugger' with 'Pica Surface Viewer'Jannik Vogel9-583/+876
2016-05-07HLE: Fix recent DSP change for Visual Studio.bunnei1-4/+2
2016-05-06fix:return proper errorwwylele1-2/+3
2016-05-06Frontends, VideoCore: Move glad initialisation to the frontendEmmanuel Gil Peyrot3-6/+18
On SDL2 this allows it to use SDL_GL_GetProcAddress() instead of the default function loader, and fixes a crash when using apitrace with an EGL context. On Qt we will need to migrate from QGLWidget to QOpenGLWidget and QOpenGLContext before we can use gladLoadGLLoader() instead of gladLoadGL(), since the former doesn’t expose a function loader.
2016-05-06HLE: Rename RescheduleIsPending to IsReschedulePending.bunnei3-3/+3
2016-05-05Layout Mii parameters input/output, and return success as result of applet workmailwl2-0/+49
2016-05-04add missing headerwwylele1-0/+1
2016-05-04make the name column larger as defaultwwylele1-1/+5
2016-05-04add icon & title to game listwwylele9-36/+254
2016-05-04Pica: Rename VertexLoaded breakpoint to VertexShaderInvocationJannik Vogel4-10/+8
2016-05-03DSP/HLE: Implement Source processingMerryMage7-5/+496
2016-05-03clean up config blockwwylele1-29/+13
2016-05-03Pica: Use a union for PicaShaderConfigJannik Vogel3-125/+139
2016-05-03Pica: Add TevStageConfigRaw to PicaShaderConfig (MSVC workaround)Jannik Vogel2-2/+23
2016-05-03Pica: Make PicaShaderConfig trivially_copyable and clear it before useJannik Vogel1-21/+28
2016-05-03OpenGL: Don't copy const_color (Reverts #1745)Jannik Vogel1-2/+3
2016-05-03Pica: Replace logic in shader.cpp with loopJannik Vogel1-34/+4
2016-05-01OpenGL: Copy TevStageConfig using a loop. Fixes bug: const_color not copiedJannik Vogel1-30/+11
2016-05-01remove duplicated function declarationwwylele1-13/+0
2016-04-30OpenGL: border_color was never set. Fixed. (#1740)Jannik Vogel1-0/+1
2016-04-30VideoCore: Run include-what-you-use and fix most includes.Emmanuel Gil Peyrot45-86/+234
2016-04-30LCD: Remove unneeded #undef with no matching #define.Emmanuel Gil Peyrot1-2/+0
2016-04-30Remove TGA dumperJannik Vogel3-62/+0
2016-04-30Audio: Add sink selection to configuration filesMerryMage10-4/+79
2016-04-30AudioCore: List of sink typesMerryMage3-0/+46
2016-04-30AudioCore: Implement NullSinkMerryMage2-0/+30
2016-04-29AudioCore: CurrentRegion() -> ReadRegion(), WriteRegion()MerryMage3-26/+31
2016-04-29add config block 0x00170000wwylele1-0/+4
2016-04-29Common: Remove section measurement from profiler (#1731)Yuri Kunde Schlesner13-306/+8
This has been entirely superseded by MicroProfile. The rest of the code can go when a simpler frametime/FPS meter is added to the GUI.
2016-04-29AudioCore: Implement interpolationMerryMage3-0/+128
2016-04-29Move and rename the MemoryAccesses class to MemoryAccessTracker.Henrik Rydgard4-32/+35
2016-04-29Make Citra build with MICROPROFILE_ENABLED set to 0 (#1709)Henrik Rydgård5-1/+30
* Make Citra build with MICROPROFILE_ENABLED set to 0 * Buildfix with microprofile kept on * moc did not like a dialog to conditionally exist. * Cleanup * Fix end of line
2016-04-28Debugger fixHenrik Rydgard1-2/+2
2016-04-28Optimize the vertex loader, nearly doubling its speed.Henrik Rydgard2-32/+54
2016-04-28Don't keep base_address in the loader, it doesn't belong there (with it, the loader can't be cached).Henrik Rydgard3-11/+10
2016-04-28Move "&" to their proper place, add missing includes and make some properly relative.Henrik Rydgard2-8/+11
2016-04-28Refactor: Extract VertexLoader from command_processor.cpp.Henrik Rydgard5-125/+185
Preparation for a similar concept to Dolphin or PPSSPP. These can be JIT-ed and cached.
2016-04-28Remove late accesses to attribute_configHenrik Rydgard1-5/+7
2016-04-28Externals: Add soundtouchMerryMage1-1/+4
2016-04-28AudioCore: Move samples_per_frame and num_sources into hle/common.hMerryMage3-12/+11
2016-04-27DSP_DSP: Fix log format strings and argumentsMerryMage1-12/+20
2016-04-27AudioCore: Hack to prevent regressions: Trigger Binary pipe interrupt every audio frameMerryMage1-0/+2
2016-04-27DSP_DSP: Add return IPC headersMerryMage2-4/+27
2016-04-27DSP_DSP: Updated interrupt implementationMerryMage4-46/+113
2016-04-27y2r_u: Cleanup some formatting.bunnei1-52/+89
2016-04-26Qt Frontend: Add Threads::Threads import in CMakeLists.txt.Emmanuel Gil Peyrot1-1/+1
This had been forgotten in df81fa11fc8972a5775a57ccde1e0ef8d7fbfe64. Fixes #1711.
2016-04-25DSP/Pipe: There are 8 pipesMerryMage2-13/+19
2016-04-24shader: Shader size is long uint, not uint.Sam Spilsbury1-1/+1
2016-04-24shader: Handle non-CALL opcodes with a breakSam Spilsbury1-0/+2
2016-04-24shader: Format string must be provided inline and not as a variableSam Spilsbury1-1/+1
2016-04-24am: title_id is long long uintSam Spilsbury1-1/+1
2016-04-24assert: Allow UNREACHABLE_MSG to have just one argumentSam Spilsbury1-1/+1
2016-04-24CMakeLists: Use imported version of Threads::ThreadsSam Spilsbury1-1/+1
This requires bumping up to a minimum of CMake 3.1. The benefit of using the imported target is that you can switch to the -pthread compiler flag on request, which may be necessary for some systems if available.
2016-04-24Replace std::map with std::array for graphics event breakpoints, and allow the compiler to inline. Saves 1%+ in vertex heavy situations.Henrik Rydgard3-9/+16
2016-04-24DSP_DSP: Remove unused variableMerryMage1-2/+0
2016-04-23Protect use of std::is_trivially_copyable to compile with GCC 4.9LittleWhite1-0/+4
2016-04-23return checks if event and memory createdmailwl1-1/+8
2016-04-23assert: Add _MSG variations for UNREACHABLE and UNIMPLEMENTEDSam Spilsbury1-0/+2
2016-04-23pica: Handle default lighting caseSam Spilsbury1-1/+6
2016-04-23ncch: Use correct format specifier (for long long uint)Sam Spilsbury1-1/+1
2016-04-23fs: Fix what appears to be a typo (filename_size / file_size)Sam Spilsbury1-1/+1
2016-04-23gdbstub: Don't check if unsigned int is > 0Sam Spilsbury1-2/+2
2016-04-23debugger: Warn if we reach an unreachable formatSam Spilsbury1-0/+6
2016-04-23CMakeLists: Use CMAKE_THREAD_LIBS_INITSam Spilsbury1-1/+1
2016-04-22gsp::Gpu: implement AcquireRight, ReleaseRight functionsmailwl1-8/+37
2016-04-22HWRasterizer: reorder declarations to match defstfarley1-9/+9
2016-04-22HWRasterizer: sync specular uniform for new shaderstfarley1-0/+2
2016-04-21HWRasterizer: Texture forwardingtfarley20-940/+1719
2016-04-21Config: Add scaled resolution optiontfarley9-1/+20
2016-04-21ac:u: stub CloseAsync; check memory size aling in svc:GetProcessInfo(type=2)mailwl2-1/+29
2016-04-20Update the stub code of NDM service!JamePeng3-27/+420
2016-04-20Update the code of service y2r!JamePeng2-32/+357
2016-04-20Implement CheckNew3DS and CheckNew3DSAppJamePeng11-14/+145
Append an item[is_new3ds] to config file[System] group Implement APT::SetNSStateField,it will update the unknown NS_state_field
2016-04-20SDL2 Frontend: Use argv[0], add a --version, and reorder options.Emmanuel Gil Peyrot1-9/+20
2016-04-17Rasterizer: Allow all blend factors for alpha blend-funcJannik Vogel1-57/+42
2016-04-16core: Clean out some unnecessary header includesLioncash3-14/+1
2016-04-15fix driver root identification on Windowswwylele1-3/+12
2016-04-15Configure Dialog: Remove minimumSize propertyMerryMage1-12/+0
2016-04-15Y2R: num_tiles should be allowed when its value is 128 (#1669)JamePeng1-1/+1
2016-04-15debug_utils: use std::make_unique for initializing PicaTraceLioncash1-1/+1
2016-04-14ncch:only decompress .code sectionwwylele1-2/+2
2016-04-14Thread: Make Barrier reusableMerryMage1-5/+5
2016-04-14common/thread: Correct code styleMerryMage1-21/+19
2016-04-14shader_jit_x64: Rename RuntimeAssert to Compile_Assert.bunnei2-5/+5
2016-04-14shader_jit_x64.cpp: Rename JitCompiler to JitShader.bunnei3-92/+92
2016-04-14shader_jit_x64: Free memory that's no longer needed after compilation.bunnei1-0/+6
2016-04-14shader_jit_x64: Use a sorted vector instead of a set for keeping track of return addresses.bunnei2-5/+8
2016-04-14shader_jit_x64: Use CALL/RET instead of JMP for subroutines.bunnei1-17/+7
2016-04-14emitter: Add CALL that can be fixed up.bunnei2-0/+13
2016-04-14shader_jit_x64: Separate initialization and code generation for readability.bunnei1-9/+8
2016-04-14shader_jit_x64: Get rid of unnecessary last_program_counter variable.bunnei2-6/+2
2016-04-14shader_jit_x64: Execute certain asserts at runtime.bunnei2-5/+19
- This is because we compile the full shader code space, and therefore its common to compile malformed instructions.
2016-04-14shader: Remove unused 'state' argument from 'Setup' function.bunnei3-5/+4
2016-04-14shader_jit_x64: Specify shader main offset at runtime.bunnei3-10/+6
2016-04-14shader_jit_x64: Allocate each program independently and persist for emu session.bunnei3-38/+28
2016-04-14shader_jit_x64: Rewrite flow control to support arbitrary CALL and JMP instructions.bunnei2-35/+119
2016-04-14shader_jit_x64: Fix strict memory aliasing issues.bunnei1-1/+3
2016-04-14emitter: Support arbitrary FixupBranch targets.bunnei2-0/+17
2016-04-14file_util: In-class initialize data membersLioncash2-6/+4
2016-04-14file_util: const qualify IOFile's Tell and GetSize functionsLioncash2-8/+8
2016-04-14file_util: Don't expose IOFile internals through the APILioncash3-31/+20
2016-04-14file_util: Check for is_trivially_copyableLioncash1-3/+5
Also applies the template checks to ReadArray as well.
2016-04-14file_util: Make IOFile data members privateLioncash1-0/+1
2016-04-12FileUtil: Missing #include, Add const to IOFile methodsMerryMage1-6/+7
2016-04-11Use Settings::Apply in SDL frontendJannik Vogel1-5/+4
2016-04-11CitraQt: Apply config at startupJannik Vogel6-12/+19
2016-04-11Set Kernel config "Unknown Value" to 0x1mailwl2-2/+7
2016-04-10Pica: Remove geometry dumper (PICA_DUMP_GEOMETRY)Jannik Vogel4-71/+0
2016-04-10OpenGL: Implement color combiner Operation::Dot3_RGBJannik Vogel1-0/+3
2016-04-09Fix BLX LR opcode interpretationmailwl1-2/+3
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:40:30 +0100