| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
| |
Currently yuzu will read the mapping but does not connect a controller
despite adding subsequent configurations for it. Read the `connected`
setting for now as a boolean like the Qt frontend.
|
| |\
| |
| | |
service: ns, set: Add PT_BR (Brazilian Portuguese)
|
| | | |
|
| |\ \
| | |
| | | |
emu_window: Remove global system instance
|
| | |/
| |
| |
| |
| |
| |
| | |
It was just the one in emu_window_sdl2, but since _gl and _vk inherit
from it, they all needed adjustments.
Leaves just the one auto system& in main().
|
| |\ \
| |/
|/| |
renderer_vulkan: Add setting to log pipeline statistics
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Use VK_KHR_pipeline_executable_properties when enabled and available to
log statistics about the pipeline cache in a game.
For example, this is on Turing GPUs when generating a pipeline cache
from Super Smash Bros. Ultimate:
Average pipeline statistics
==========================================
Code size: 6433.167
Register count: 32.939
More advanced results could be presented, at the moment it's just an
average of all 3D and compute pipelines.
|
| |\ \
| |/
|/| |
general: Implement FullscreenMode enumeration
|
| | |\ |
|
| | | |
| | |
| | |
| | |
| | | |
Prevents us from using an unclear 0 or 1 to describe the fullscreen
mode.
|
| |\ \ \
| | | |
| | | | |
general: Rename "Frame Limit" references to "Speed Limit"
|
| | |/ /
| | |
| | |
| | |
| | | |
This setting is best referred to as a speed limit, as it involves the limits of all timing based aspects of the emulator, not only framerate.
This allows us to differentiate it from the fps unlocker setting.
|
| |\ \ \
| |_|/
|/| | |
config, nvflinger: Add FPS cap setting
|
| | |/
| |
| |
| | |
Allows finer tuning of the FPS limit.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
GLASM is getting good enough that we can move it out of advanced
graphics settings. This removes the setting `use_assembly_shaders`,
opting for a enum class `shader_backend`. This comes with the benefits
that it is extensible for additional shader backends besides GLSL and
GLASM, and this will work better with a QComboBox.
Qt removes the related assembly shader setting from the Advanced
Graphics section and places it as a new QComboBox in the API Settings
group. This will replace the Vulkan device selector when OpenGL is
selected.
Additionally, mark all of the custom anisotropic filtering settings as
"WILL BREAK THINGS", as that is the case with a select few games.
|
| | |
| |
| |
| | |
Also add a setting for enable Nsight Aftermath.
|
| |/ |
|
| |
|
|
|
|
|
| |
Reverts 48259de0c1a6a1aca77eec31cb8aca5ca2b680dd to the previous
hierarchy and fixes the resolution issue with this fullscreen mode.
yuzu-cmd will now read the fullscreen_mode setting and use it
appropriately.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* emu_window_sdl2_vk: Use the generated SDL config
On Linux, due to the way we include SDL2 as a submodule, it makes it
difficult for us to specify which SDL_config.h we intended to include.
Before, CMake would default to the dummy one included with SDL and
ignore the generated one.
This tells CMake to use the generated one. In addition, we define
USING_GENERATED_CONFIG_H to throw an error in case the dummy config is
used by accident. Fixes Vulkan not working on Linux yuzu-cmd.
* emu_window_sdl2_vk: Specify the window manager if it should be supported
The original language "not implemented" is wrong if the implementation
exists but is not compiled. This causes a bit of a debugging headache
when it goes wrong. Log it if the window manager is known before
exiting.
* sdl_impl, emu_window: Remove clang ignore
Fixed upstream by
libsdl-org/SDL@25fc40b0bd44c484051064bc6b945ea9943f88dd
* Enable fullscreen support for Vulkan on yuzu-cmd
Hooked up the existing SDL2 logic for fullscreen support in the Vulkan window of yuzu-cmd.
* Change fullscreen logic to attempt desktop resolution first on yuzu-cmd
Changed the order in which we attempt to switch to fullscreen. First try desktop resolution first, if it fails fall back to streched fullscreen using windowed resolution.
Co-authored-by: lat9nq <22451773+lat9nq@users.noreply.github.com>
Co-authored-by: san <san+gitkraken@smederijmerlijn.nl>
|
| |\
| |
| | |
yuzu-cmd: Linux Vulkan fixes
|
| | |
| |
| |
| |
| | |
Fixed upstream by
libsdl-org/SDL@25fc40b0bd44c484051064bc6b945ea9943f88dd
|
| | |
| |
| |
| |
| |
| |
| | |
The original language "not implemented" is wrong if the implementation
exists but is not compiled. This causes a bit of a debugging headache
when it goes wrong. Log it if the window manager is known before
exiting.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
On Linux, due to the way we include SDL2 as a submodule, it makes it
difficult for us to specify which SDL_config.h we intended to include.
Before, CMake would default to the dummy one included with SDL and
ignore the generated one.
This tells CMake to use the generated one. In addition, we define
USING_GENERATED_CONFIG_H to throw an error in case the dummy config is
used by accident. Fixes Vulkan not working on Linux yuzu-cmd.
|
| | |
| |
| |
| |
| |
| |
| | |
Many settings in common/settings.h are missing from yuzu-cmd, either
they were added to default_ini.h but not read in, or vice versa, or the
setting was altogether omitted from yuzu-cmd. Some defaults were
reported wrong, so those were fixed where noticed.
|
| |/
|
|
|
| |
These settings are not being read in config.cpp AND they do not exist in
common/settings.h. Remove their references.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
Also adds documentation for the ReadSetting function.
Address review comments.
Co-authored-by: Mai M. <mathew1800@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Creates a new BasicSettings class in common/settings, and forces setting
a default and label for each setting that uses it in common/settings.
Moves defaults and labels from both frontends into common settings.
Creates a helper function in each frontend to facillitate reading the
settings now with the new default and label properties.
Settings::Setting is also now a subclass of Settings::BasicSetting. Also
adds documentation for both Setting and BasicSetting.
|
| |\
| |
| | |
GPU: Implement a garbage collector for GPU Caches (project Reaper+)
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| | |
Use its std::stop_token to abort shader cache loading.
Using std::stop_token instead of std::atomic_bool allows the usage of
other utilities like std::stop_callback.
|
| | |
| |
| |
| |
| | |
Enabling this setting will allow some titles to present more frames to
the screen as they become available in the nvflinger buffer queue.
|
| |\ \
| |/
|/| |
Audio: SDL2 audio backend
|
| | | |
|
| | | |
|
| |\ \
| | |
| | | |
textures: Add a toggle for GPU Accelerated ASTC decoder
|
| | | | |
|
| |/ /
| |
| |
| |
| |
| |
| |
| | |
This introduces a new setting Enable FS Access Log which saves the filesystem access log to sdmc:/FsAccessLog.txt
If this setting is not enabled, this will indicate to FS to not call OutputAccessLogToSdCard.
Fixes softlocks during loading in Xenoblade Chronicles 2 when certain DLC is enabled.
|
| | | |
|
| |\ \
| | |
| | | |
yuzu-cmd: Fix OpenGL rendering
|
| | | |
| | |
| | | |
Co-authored-by: Mai M. <mathew1800@gmail.com>
|
| | |/ |
|
| |/ |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* common: fs: fs_types: Create filesystem types
Contains various filesystem types used by the Common::FS library
* common: fs: fs_util: Add std::string to std::u8string conversion utility
* common: fs: path_util: Add utlity functions for paths
Contains various utility functions for getting or manipulating filesystem paths used by the Common::FS library
* common: fs: file: Rewrite the IOFile implementation
* common: fs: Reimplement Common::FS library using std::filesystem
* common: fs: fs_paths: Add fs_paths to replace common_paths
* common: fs: path_util: Add the rest of the path functions
* common: Remove the previous Common::FS implementation
* general: Remove unused fs includes
* string_util: Remove unused function and include
* nvidia_flags: Migrate to the new Common::FS library
* settings: Migrate to the new Common::FS library
* logging: backend: Migrate to the new Common::FS library
* core: Migrate to the new Common::FS library
* perf_stats: Migrate to the new Common::FS library
* reporter: Migrate to the new Common::FS library
* telemetry_session: Migrate to the new Common::FS library
* key_manager: Migrate to the new Common::FS library
* bis_factory: Migrate to the new Common::FS library
* registered_cache: Migrate to the new Common::FS library
* xts_archive: Migrate to the new Common::FS library
* service: acc: Migrate to the new Common::FS library
* applets/profile: Migrate to the new Common::FS library
* applets/web: Migrate to the new Common::FS library
* service: filesystem: Migrate to the new Common::FS library
* loader: Migrate to the new Common::FS library
* gl_shader_disk_cache: Migrate to the new Common::FS library
* nsight_aftermath_tracker: Migrate to the new Common::FS library
* vulkan_library: Migrate to the new Common::FS library
* configure_debug: Migrate to the new Common::FS library
* game_list_worker: Migrate to the new Common::FS library
* config: Migrate to the new Common::FS library
* configure_filesystem: Migrate to the new Common::FS library
* configure_per_game_addons: Migrate to the new Common::FS library
* configure_profile_manager: Migrate to the new Common::FS library
* configure_ui: Migrate to the new Common::FS library
* input_profiles: Migrate to the new Common::FS library
* yuzu_cmd: config: Migrate to the new Common::FS library
* yuzu_cmd: Migrate to the new Common::FS library
* vfs_real: Migrate to the new Common::FS library
* vfs: Migrate to the new Common::FS library
* vfs_libzip: Migrate to the new Common::FS library
* service: bcat: Migrate to the new Common::FS library
* yuzu: main: Migrate to the new Common::FS library
* vfs_real: Delete the contents of an existing file in CreateFile
Current usages of CreateFile expect to delete the contents of an existing file, retain this behavior for now.
* input_profiles: Don't iterate the input profile dir if it does not exist
Silences an error produced in the log if the directory does not exist.
* game_list_worker: Skip parsing file if the returned VfsFile is nullptr
Prevents crashes in GetLoader when the virtual file is nullptr
* common: fs: Validate paths for path length
* service: filesystem: Open the mod load directory as read only
|
| |\
| |
| | |
configuration: Add CPU tab to game properties and slight per-game settings rework
|
| | | |
|
| |/
|
|
|
|
|
|
|
| |
The FPS counter was based on metrics in the nvdisp swapbuffers call. This metric would be accurate if the gpu thread/renderer were synchronous with the nvdisp service, but that's no longer the case.
This commit moves the frame counting responsibility onto the concrete renderers after their frame draw calls. Resulting in more meaningful metrics.
The displayed FPS is now made up of the average framerate between the previous and most recent update, in order to avoid distracting FPS counter updates when framerate is oscillating between close values.
The status bar update frequency was also changed from 2 seconds to 500ms.
|
| | |
|
| |\
| |
| | |
emu_window: unsigned -> u32
|
| | |
| |
| |
| | |
This is more concise and consistent with the rest of the codebase.
|
| |/ |
|
| |
|
|
|
|
| |
SDL 2.0.14 introduces an incompatibility with Clang, causing it to
trigger -Wimplicit-fallthrough even though it is marked. Ignore it for
now, with a comment mentioning why this is needed.
|
| |\
| |
| | |
common/log: Move Log namespace into the Common namespace
|
| | |
| |
| |
| |
| | |
Forgot to move this over when I moved the rest of the source files with
lacking namespaces over.
|
| | |
| |
| |
| | |
- Removes a dependency on core and input_common from common.
|
| |/
|
|
|
|
| |
- This is a developer-only setting and no longer needs to be enabled by default.
- Also adds "use_auto_stub" setting to SDL frontend while we are here.
- Supersedes #1340.
|
| |\
| |
| | |
InputCommon: Mouse fixes
|
| | | |
|
| |/ |
|
| |\
| |
| | |
yuzu/configure_filesystem: Remove "Select Cache Directory" option
|
| | |
| |
| |
| |
| | |
This tab of the settings is already extremely bloated and the setting itself is quite useless.
With a gamelist of almost 30 games, the cache directory is smaller than 1MB for me and therefore I don't see why it needs to be configurable.
|
| | | |
|
| | |
| |
| |
| |
| | |
This is a better default for most games, yielding better performance and
less graphical issues.
|
| | |
| |
| |
| |
| |
| | |
Instead of using a two step initialization to report errors, initialize
the GPU renderer and rasterizer on the constructor and report errors
through std::runtime_error.
|
| |\ \
| | |
| | | |
input_common: Add mouse panning
|
| | | | |
|
| |/ / |
|
| |\ \
| | |
| | | |
renderer_opengl: Avoid precompiled cache and force NV GL cache directory
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Setting __GL_SHADER_DISK_CACHE_PATH we can force the cache directory to
be in yuzu's user directory to stop commonly distributed malware from
deleting our driver shader cache. And by setting
__GL_SHADER_DISK_CACHE_SKIP_CLEANUP we can have an unbounded shader
cache size.
This has only been implemented on Windows, mostly because previous tests
didn't seem to work on Linux.
Disable the precompiled cache on Nvidia's driver. There's no need to
hide information the driver already has in its own cache.
|
| | | | |
|
| |/ / |
|
| | | |
|
| |/ |
|
| | |
|
| |
|
|
|
| |
Removes the unnecesary burden of maintaining separate #ifdef paths and
allows us sharing generic Vulkan code across APIs.
|
| |
|
|
|
| |
The gdbstub itself was removed with https://github.com/yuzu-emu/yuzu/pull/5028.
This PR just removes the remaining gdb configuration code from the emulator and the UI.
|
| |
|
|
|
|
|
|
|
|
|
| |
Specifically:
const auto size = sdl2_config->GetInteger("System", "users_size", 0);
The variable is never used, producing a warning. I wondered if this
ought to be assigning something to in `Settings`, but nothing else in
the codebase ever mentions a setting called "users_size", so I guess
it's safe to remove...
|
| |\
| |
| | |
InputCommon: Add multiple udp server support
|
| | | |
|
| |\ \
| | |
| | | |
InputCommon: Implement full mouse support
|
| | | | |
|
| | |/
|/|
| |
| |
| |
| | |
Removes all remaining usages of the global system instance. After this,
migration can begin to migrate to being constructed and managed entirely
by the various frontends.
|
| |\ \
| | |
| | | |
Overhaul EmuWindow::PollEvents to fix yuzu-cmd calling SDL_PollEvents off main thread
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
EmuWindow::PollEvents was called from the GPU thread (or the CPU thread
in sync-GPU mode) when swapping buffers. It had three implementations:
- In GRenderWindow, it didn't actually poll events, just set a flag and
emit a signal to indicate that a frame was displayed.
- In EmuWindow_SDL2_Hide, it did nothing.
- In EmuWindow_SDL2, it did call SDL_PollEvents, but this is wrong
because SDL_PollEvents is supposed to be called on the thread that set
up video - in this case, the main thread, which was sleeping in a
busyloop (regardless of whether sync-GPU was enabled). On macOS this
causes a crash.
To fix this:
- Rename EmuWindow::PollEvents to OnFrameDisplayed, and give it a
default implementation that does nothing.
- In EmuWindow_SDL2, do not override OnFrameDisplayed, but instead have
the main thread call SDL_WaitEvent in a loop.
|
| |/
|
|
|
| |
Given this is a central class, we should flag cases where the return
value of some functions not being used is likely a bug.
|
| |
|
|
|
|
|
| |
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.
Co-authored-by: Its-Rei <kupfel@gmail.com>
|
| |
|
|
| |
This will be replaced in favor of per-player vibration strength modifiers.
|
| |
|
|
|
| |
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
|
| | |
|
| |
|
|
|
|
|
|
| |
Unicorn long-since lost most of its use, due to dynarmic gaining support
for handling most instructions. At this point any further issues
encountered should be used to make dynarmic better.
This also allows us to remove our dependency on Python.
|
| |
|
|
|
|
|
| |
- In general, this is now the preferred settings for most games.
# Conflicts:
# src/yuzu/configuration/config.cpp
|
| |
|
|
|
| |
Emulated mailbox presentation was causing performance issues on
Nvidia's OpenGL driver. Remove it.
|
| |\
| |
| | |
hid/configuration: Implement motion controls to HID
|
| | |
| |
| |
| |
| | |
This allows toggling motion on or off, and allows access to the motion configuration.
Also changes the [waiting] text for motion buttons to Shake! as this is how motion is connected to a player.
|
| |/
|
|
|
|
|
|
|
| |
Now that the GPU is initialized when video backends are initialized,
it's no longer needed to query components once the game is running: it
can be done when yuzu is booting.
This allows us to pass components between constructors and in the
process remove all Core::System references in the video backend.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Abstracts most of the input mechanisms under an InputSubsystem class
that is managed by the frontends, eliminating any static constructors
and destructors. This gets rid of global accessor functions and also
allows the frontends to have a more fine-grained control over the
lifecycle of the input subsystem.
This also makes it explicit which interfaces rely on the input subsystem
instead of making it opaque in the interface functions. All that remains
to migrate over is the factories, which can be done in a separate
change.
|
| |
|
|
|
| |
Co-authored-by: James Rowe <jroweboy@gmail.com>
Co-authored-by: Its-Rei <kupfel@gmail.com>
|
| |
|
|
|
| |
Migrates the Telemetry namespace into the Common namespace to make the
code consistent with the rest of our common code.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Migrates a remaining common file over to the Common namespace, making it
consistent with the rest of common files.
This also allows for high-traffic FS related code to alias the
filesystem function namespace as
namespace FS = Common::FS;
for more concise typing.
|
| | |
|
| |\
| |
| | |
configuration: Add settings to enable/disable specific CPU optimizations
|
| | | |
|
| |/ |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and
Suspended State, Recreates the bootmanager, Initializes Multicore
system.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Occurs when doing a local compile in MSVC build. The compiler I'm using is as below:
Microsoft Visual Studio Community 2019 Preview
Version 16.6.0 Preview 5.0
Fixes this error:
CVTRES : fatal error CVT1100: duplicate resource. type:MANIFEST, name:1, language:0x0409
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
I have put 0 since previous name was 1. If have other names in mind, please let me know.
Co-Authored-By: dragios <dragios@users.noreply.github.com>
|
| |\
| |
| | |
yuzu/frontend: Remove internal resolution option
|
| | | |
|
| |\ \
| |/
|/| |
video_core: Implement Macro JIT
|
| | | |
|
| |\ \
| |/
|/| |
OpenGL: Enable Debug Context and Synchronous debugging when graphics debugging is enabled
|
| | |
| |
| |
| |
| | |
This commit aims to help easing debugging of driver crashes without
having to modify existing code.
|
| |/
|
|
|
| |
Add settings for assembly shaders. Currently hidden to avoid users from
accidentally enabled them.
|
| | |
|
| |\
| |
| | |
Optimize GPU Command Lists and Introduce Fast GPU Time Option
|
| | | |
|
| |\ \
| |/
|/| |
Fix format error in performance statistics
|
| | |
| |
| |
| | |
Formatting
|
| |\ \
| |/
|/| |
Introduce Predictive Flushing and Improve ASYNC GPU
|
| | | |
|
| | | |
|
| |/ |
|
| | |
|
| |
|
|
| |
Create Vulkan instances and surfaces from the Vulkan backend.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changes the GraphicsContext to be managed by the GPU core. This
eliminates the need for the frontends to fool around with tricky
MakeCurrent/DoneCurrent calls that are dependent on the settings (such
as async gpu option).
This also refactors out the need to use QWidget::fromWindowContainer as
that caused issues with focus and input handling. Now we use a regular
QWidget and just access the native windowHandle() directly.
Another change is removing the debug tool setting in FrameMailbox.
Instead of trying to block the frontend until a new frame is ready, the
core will now take over presentation and draw directly to the window if
the renderer detects that its hooked by NSight or RenderDoc
Lastly, since it was in the way, I removed ScopeAcquireWindowContext and
replaced it with a simple subclass in GraphicsContext that achieves the
same result
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This commit disables the Boxcat backend by default for new users of yuzu.
There's several reasons as to why this is done:
1. Boxcat currently only actually has an impact on 3 games and doesn't influence any core mechanics of them
2. It causes a plethora of issues when enabled such as games like Crash Team Racing, Diablo 3 and Tales of Vesperia not booting at all or hanging
3. It causes https://github.com/yuzu-emu/yuzu/issues/2957 to happen. This makes the configuration menu totally unusable for many Linux users of yuzu
I think those points show that currently the negative impact of Boxcat outweighs its benefits and should therefore be disabled by default.
For users who are eager to use the extra features provided by it, they can still just turn it on in the settings.
|
| |\
| |
| | |
frontend/Graphics: Add "Advanced" graphics tab and experimental Anisotropic Filtering support
|
| | | |
|
| |/
|
|
|
|
| |
When the default file is read in, the settings default value is only used
when the key is missing. As it was, the key existed, but the value was empty string
causing it to accept that as a value to pass into the core
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Available as a drop down within the configure graphics tab.
|
| | |
|
| |
|
|
|
| |
Adds a Qt and SDL2 frontend for Vulkan. It also finishes the missing
bits on Vulkan initialization.
|
| | |
|
| |
|
|
| |
This should hopefully fix compilation errors.
|
| |
|
|
|
|
|
|
| |
An implementation of the cemuhook motion/touch protocol, this adds the
ability for users to connect several different devices to citra to send
direct motion and touch data to citra.
Co-Authored-By: jroweboy <jroweboy@gmail.com>
|
| |
|
|
|
|
| |
Avoids potential allocations due to the usage of std::string on strings
that we know at compile time. Most of these might fit in SSO, but it
adds complexity that can be easily avoided with string views.
|
| |
|
|
|
|
|
| |
Emulates negative y viewports with ARB_clip_control. This allows us to
more easily emulated pipelines with tessellation and/or geometry shader
stages. It also avoids corrupting games with transform feedbacks and
negative viewports (gl_Position.y was being modified).
|
| |
|
|
| |
This fixes linux and mingw builds.
|
| |\
| |
| | |
Port citra-emu/citra#4950: "Add FPS to SDL title bar"
|
| | |
| |
| |
| |
| |
| | |
Also fix a small issue with incorrect shutdown ordering in SDL.
Previously the system would still be running so the telemetry task
didn't launch and detached_tasks would assert(count == 0)
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Co-Authored-By: jroweboy <jroweboy@gmail.com>
|
| |
|
|
|
|
|
|
|
|
| |
The JIT is mature enough that this setting can be removed, falling back
to Unicorn only on unsupported architectures. Any missing features from
Unicorn (of which there are extremely few), are mostly
developer-oriented, which most users don't care about.
Features should be coordinated with the JIT, not the interpreter,
anyhow.
|
| |\
| |
| | |
Implement a new Texture Cache
|
| | | |
|
| |\ \
| | |
| | | |
yuzu: Move CPU Jit setting to Debug tab
|
| | | |
| | |
| | |
| | | |
A normal user shouldn't change this, as it will slow down the emulation and can lead to bugs or crashes. The renaming is done in order to prevent users from leaving this on without a way to turn it off from the UI.
|
| |/ / |
|
| |\ \
| |/
|/| |
core: Add detailed local reporting feature for development
|
| | |
| |
| |
| | |
Full enable/disable for all reports.
|
| |\ \
| | |
| | | |
video_core: Drop OpenGL core in favor of OpenGL compatibility
|
| | | | |
|
| |\ \ \
| |/ /
|/| | |
core/telemetry_session: Remove usages of the global system accessor
|
| | | |
| | |
| | |
| | |
| | | |
Amends the formatting specifier to obey libfmt. Prevents the application
from terminating due to a formatting issue in the error case.
|
| | | |
| | |
| | |
| | | |
This is a hold-over from Citra and doesn't apply to yuzu.
|
| |\ \ \
| |/ /
|/| | |
yuzu_cmd: Split emu_window OpenGL implementation into its own file
|
| | | |
| | |
| | |
| | |
| | | |
There's no performance improvement in passing an unsigned pair by
reference.
|
| | |/ |
|
| |/
|
|
|
|
|
|
|
|
|
| |
Makes the parameter ordering consistent, and also makes the filename
parameter a std::string. A std::string would be constructed anyways with
the previous code, as IOFile's only constructor with a filepath is one
taking a std::string.
We can also make WriteStringToFile's string parameter utilize a
std::string_view for the string, making use of our previous changes to
IOFile.
|
| |\
| |
| | |
yuzu_cmd: Make OpenGL's context current
|
| | |
| |
| |
| |
| | |
The SDL2 frontend never bound the OpenGL context, resulting on a white
screen and no-ops all over the backend.
|
| |/ |
|
| |\
| |
| | |
Allow picking a Compatibility Profile for OpenGL.
|
| | |
| |
| |
| |
| |
| | |
This option allows picking the compatibility profile since a lot of bugs
are fixed in it. We devs will use this option to easierly debug current
problems in our Core implementation.:wq
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
Previously we were building with MBCS, which is pretty undesirable. We
want the application to be Unicode-aware in general.
Currently, we make the command line variant of yuzu use ANSI variants of
the non-standard getopt functions that we link in for Windows, given we
only have an ANSI option-set.
We should really replace getopt with a library that we make all build
types of yuzu link in, but this will have to do for the time being.
|
| |\
| |
| | |
Frontend: Migrate to QOpenGLWindow and support shared contexts
|
| | | |
|
| |\ \
| | |
| | | |
file_sys: Provide generic interface for accessing game data
|
| | | | |
|
| |/ /
| |
| |
| | |
This was initially added to prevent problems from stubbed/not implemented NFC services, but as we never encountered such and as it's only used in a deprecated function anyway, I guess we can just remove it to prevent more clutter of the settings.
|
| | | |
|
| |\ \
| | |
| | | |
Port various Citra changes to input_common, including deadzone support
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes the interface as well to remove any unique methods that
frontends needed to call such as StartJoystickEventHandler by
conditionally starting the polling thread only if the frontend hasn't
started it already. Additionally, moves all global state into a single
SDLState class in order to guarantee that the destructors are called in
the proper order
|
| | | | |
|
| | | | |
|
| |\ \ \
| | | |
| | | | |
Asynchronous GPU command processing
|
| | |/ / |
|
| |/ /
| |
| |
| |
| | |
We already have the system instance around, so we can use that instead
of the accessor.
|
| | | |
|
| | | |
|
| |/ |
|
| | |
|
| | |
|
| |
|
| |
Stored as signed seconds since epoch.
|
| | |
|
| | |
|
| | |
|
| |\
| |
| | |
Update OpenGL's backend version from 3.3 to 4.3
|
| | | |
|
| | | |
|
| |\ \
| |/
|/| |
patch_manager: Add support for applying LayeredFS patches to ExeFS
|
| | |
| |
| |
| | |
When enabled, all exefs(es) will be copied to yuzu/dump/<title_id>/exefs.
|
| | | |
|
| | | |
|
| |/
|
|
|
|
|
|
|
|
| |
* Correctly sets default system language for yuzu-CLI
A user reported that yuzu_cmd runs games in Japanese rather than the correct default of English (like yuzu-qt does correctly), this change fixes that.
* fix clang issue
deleted whitespace
|
| |\
| |
| | |
patch_manager: Add support for dumping uncompressed NSOs
|
| | |
| |
| |
| | |
Also adds UI option in Debug > Dump section, with the idea later things to be dumped (i.e. other game data or textures, etc) will use the same group box.
|
| | | |
|
| |\ \
| |/
|/| |
logging: Add DebuggerBackend for logging to Visual Studio
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Fixed conflict with nfp
* Few fixups for nfc
* Conflict 2
* Fixed AttachAvailabilityChangeEvent
* Conflict 3
* Fixed byte padding
* Refactored amiibo to not reside in "System"
* Removed remaining references of nfc from system
* used enum for Nfc GetStateOld
* Added missing newline
* Moved file operations to front end
* Conflict 4
* Amiibos now use structs and added mutexes
* Removed amiibo_path
|
| | |
| |
| |
| | |
- This will be used as a catch-all for slow-but-accurate GPU emulation paths.
|
| | |
| |
| |
| |
| |
| |
| | |
Neither of these functions alter the ownership of the provided pointer,
so we can simply make the parameters a reference rather than a direct
shared pointer alias. This way we also disallow passing incorrect memory values like
nullptr.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
change TouchToPixelPos to return std::pair<int, int>
static_cast (SDL)
various minor style and code improvements
style - PascalCase for function names
made touch events private
const pointer arg in touch events
make TouchToPixelPos a const member function
did I do this right?
braces on barely-multiline if
remove question comment (confirmed in Discord)
fixed consts
remove unused parameter from TouchEndEvent
DRY - High-DPI scaled touch put in separate function
also fixes a bug where if you start touching (with either mouse or touchscreen) and drag the mouse to the LEFT of the emulator window, the touch point jumps to the RIGHT side of the touchscreen; draggin to above the window would make it jump to the bottom.
implicit conversion from QPoint to QPointF, apparently
I have no idea what const even means but I'll put it here anyway
remove unused or used-once variables
make touch scaling functions const, and put their implementations together
removed unused FingerID parameters
QTouchEvent forward declaration; add comment to TouchBegin that was lost in an edit
better DRY in SDL
To do -> TODO(NeatNit)
remove unused include
|
| | |
| |
| |
| | |
Uses -p (--program) and following string as args.
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| |\
| |
| | |
yuzu-cmd: Add filesystem service initializer call
|
| | |
| |
| |
| | |
Ensures all relevant filesystem objects are initialized and eliminates a crash related to the RegisteredCache.
|
| |/
|
|
|
|
|
|
|
|
| |
* Fix bug where default username value for yuzu_cmd create an userprofile with uninitialize data as username
* Fix format
* Apply code review changes
* Remove nullptr check
|
| |
|
|
|
|
| |
* gl_rasterizer: use ARB_multi_bind for uniform buffers
* address feedback
|
| |\
| |
| | |
audio_core: Add audio stretching support
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| | |
It allows us to use texture views and it reduces the overhead within the GPU driver.
But it disallows us to reallocate the texture, but we don't do so anyways.
In the end, it is the new way to allocate textures, so there is no need to use the old way.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* Joystick hotplug support (#4141)
* use SDL_PollEvent instead of SDL_JoystickUpdate
Register hot plugged controller by GUID if they were configured in a previous session
* Move SDL_PollEvent into its own thread
* Don't store SDLJoystick pointer in Input Device; Get pointer on each GetStatus call
* Fix that joystick_list gets cleared after SDL_Quit
* Add VirtualJoystick for InputDevices thats never nullptr
* fixup! Add VirtualJoystick for InputDevices thats never nullptr
* fixup! fixup! Add VirtualJoystick for InputDevices thats never nullptr
* Remove SDL_GameController, make SDL_Joystick* unique_ptr
* fixup! Remove SDL_GameController, make SDL_Joystick* unique_ptr
* Adressed feedback; fixed handling of same guid reconnects
* fixup! Adressed feedback; fixed handling of same guid reconnects
* merge the two joystick_lists into one
* make SDLJoystick a member of VirtualJoystick
* fixup! make SDLJoystick a member of VirtualJoystick
* fixup! make SDLJoystick a member of VirtualJoystick
* fixup! fixup! make SDLJoystick a member of VirtualJoystick
* SDLJoystick: Addressed review comments
* Address one missed review comment
|
| |\ \
| |/
|/| |
yuzu-cmd: fix SDL logging
|
| | | |
|
| |/
|
|
|
|
|
| |
This hopefully helps our cache not to redundant upload the vertex buffer.
# Conflicts:
# src/video_core/renderer_opengl/gl_rasterizer.cpp
|
| | |
|
| | |
|
| |\
| |
| | |
file_sys: Allow for custom NAND/SD directories
|
| | | |
|
| |/
|
|
|
|
| |
Eliminates the need to rebuild some source files if the file_util header
ever changes. This also uncovered some indirect inclusions, which have
also been fixed.
|
| |
|
|
|
|
|
|
|
|
|
| |
The follow-up to e2457418dae19b889b2ad85255bb95d4cd0e4bff, which
replaces most of the includes in the core header with forward declarations.
This makes it so that if any of the headers the core header was
previously including change, then no one will need to rebuild the bulk
of the core, due to core.h being quite a prevalent inclusion.
This should make turnaround for changes much faster for developers.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
| |
We can make the enum class type compatible with fmt by providing an
overload of operator<<.
While we're at it, perform proper bounds checking. If something exceeds
the array, it should be a hard fail, because it's, without a doubt, a
programmer error in this case.
|
| |
|
|
| |
Gets the class out of the global namespace.
|
| |
|
| |
Full list of new errors and descriptions in core/loader/loader.h
|
| | |
|
| |\
| |
| | |
video_core: Eliminate the g_renderer global variable
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We move the initialization of the renderer to the core class, while
keeping the creation of it and any other specifics in video_core. This
way we can ensure that the renderer is initialized and doesn't give
unfettered access to the renderer. This also makes dependencies on types
more explicit.
For example, the GPU class doesn't need to depend on the
existence of a renderer, it only needs to care about whether or not it
has a rasterizer, but since it was accessing the global variable, it was
also making the renderer a part of its dependency chain. By adjusting
the interface, we can get rid of this dependency.
|
| |\ \
| |/
|/| |
XCI and Encrypted NCA Support
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| | | |
|
| |/
|
|
|
|
|
|
|
|
|
| |
Makes the global a member of the RendererBase class. We also change this
to be a reference. Passing any form of null pointer to these functions
is incorrect entirely, especially given the code itself assumes that the
pointer would always be in a valid state.
This also makes it easier to follow the lifecycle of instances being
used, as we explicitly interact the renderer with the rasterizer, rather
than it just operating on a global pointer.
|
| | |
|
| |\
| |
| | |
Port #3665 from Citra: "frontend: Log Citra version"
|
| | | |
|
| |/ |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of using an unsigned int as a parameter and expecting a user to
always pass in the correct values, we can just convert the enum into an
enum class and use that type as the parameter type instead, which makes
the interface more type safe.
We also get rid of the bookkeeping "NUM_" element in the enum by just
using an unordered map. This function is generally low-frequency in
terms of calls (and I'd hope so, considering otherwise would mean we're
slamming the disk with IO all the time) so I'd consider this acceptable
in this case.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
* Port #3335 and #3373 from Citra
* Fixup: Use the new logging placeholders
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
Given we utilize fmt, we don't need to provide our own functions for formatting anymore
|
| | |
|
| |\
| |
| | |
SDL2: Implement fullscreen. (Original PR: citra-emu/citra#3607)
|
| | | |
|
| |/
|
|
|
|
|
|
| |
* Port 3528: use nvidia graphics automatically on laptops with optimus
* Force dedicated AMD Card for switchable Graphics
* Ran clang-format
|
| | |
|
| |\
| |
| | |
Update Dialog from citra to yuzu
|
| | | |
|
| |\ \
| | |
| | | |
Change Telemetry Names to yuzu and remove links to citra
|
| | | | |
|
| | | | |
|
| | | | |
|
| | | | |
|
| |/ / |
|
| |\ \
| | |
| | | |
Remove Option for N/3DS from default.ini
|
| | |/ |
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
| |
Removes the need to store to separate SRC and HEADER variables, and then
construct the target in most cases.
|
| | |
|
| | |
|
| |\
| |
| | |
Various fixes
|
| | | |
|
| | | |
|
| |/ |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
