summaryrefslogtreecommitdiffstats
path: root/Doxyfile
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Doxyfile124
1 files changed, 62 insertions, 62 deletions
diff --git a/Doxyfile b/Doxyfile
index 92faa0b2a..6ddf2cf21 100644
--- a/Doxyfile
+++ b/Doxyfile
@@ -38,7 +38,7 @@ PROJECT_NAME = Citra
# could be handy for archiving the generated documentation or if some version
# control system is used.
-PROJECT_NUMBER =
+PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer a
@@ -162,7 +162,7 @@ FULL_PATH_NAMES = YES
# will be relative from the directory where doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-STRIP_FROM_PATH =
+STRIP_FROM_PATH =
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
@@ -171,7 +171,7 @@ STRIP_FROM_PATH =
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.
-STRIP_FROM_INC_PATH =
+STRIP_FROM_INC_PATH =
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
# less readable) file names. This can be useful is your file systems doesn't
@@ -238,13 +238,13 @@ TAB_SIZE = 4
# "Side Effects:". You can put \n's in the value part of an alias to insert
# newlines.
-ALIASES =
+ALIASES =
# This tag can be used to specify a number of word-keyword mappings (TCL only).
# A mapping has the form "name=value". For example adding "class=itcl::class"
# will allow you to use the command class in the itcl::class meaning.
-TCL_SUBST =
+TCL_SUBST =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
@@ -291,7 +291,7 @@ OPTIMIZE_OUTPUT_VHDL = NO
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
# the files are not read by doxygen.
-EXTENSION_MAPPING =
+EXTENSION_MAPPING =
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
@@ -627,7 +627,7 @@ GENERATE_DEPRECATEDLIST= YES
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.
-ENABLED_SECTIONS =
+ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
@@ -669,7 +669,7 @@ SHOW_NAMESPACES = YES
# by doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.
-FILE_VERSION_FILTER =
+FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
@@ -682,7 +682,7 @@ FILE_VERSION_FILTER =
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.
-LAYOUT_FILE =
+LAYOUT_FILE =
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
# the reference definitions. This must be a list of .bib files. The .bib
@@ -692,7 +692,7 @@ LAYOUT_FILE =
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
# search path. See also \cite for info how to create references.
-CITE_BIB_FILES =
+CITE_BIB_FILES =
#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
@@ -751,7 +751,7 @@ WARN_FORMAT = "$file:$line: $text"
# messages should be written. If left blank the output is written to standard
# error (stderr).
-WARN_LOGFILE =
+WARN_LOGFILE =
#---------------------------------------------------------------------------
# Configuration options related to the input files
@@ -807,7 +807,7 @@ RECURSIVE = YES
# Note that relative paths are relative to the directory from which doxygen is
# run.
-EXCLUDE =
+EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
@@ -823,7 +823,7 @@ EXCLUDE_SYMLINKS = NO
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories for example use the pattern */test/*
-EXCLUDE_PATTERNS =
+EXCLUDE_PATTERNS =
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
@@ -834,13 +834,13 @@ EXCLUDE_PATTERNS =
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories use the pattern */test/*
-EXCLUDE_SYMBOLS =
+EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).
-EXAMPLE_PATH =
+EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
@@ -860,7 +860,7 @@ EXAMPLE_RECURSIVE = NO
# that contain images that are to be included in the documentation (see the
# \image command).
-IMAGE_PATH =
+IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
@@ -877,7 +877,7 @@ IMAGE_PATH =
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
-INPUT_FILTER =
+INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis. Doxygen will compare the file name with each pattern and apply the
@@ -886,7 +886,7 @@ INPUT_FILTER =
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
# patterns match the file name, INPUT_FILTER is applied.
-FILTER_PATTERNS =
+FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER ) will also be used to filter the input files that are used for
@@ -901,14 +901,14 @@ FILTER_SOURCE_FILES = NO
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-FILTER_SOURCE_PATTERNS =
+FILTER_SOURCE_PATTERNS =
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
# and want to reuse the introduction page also for the doxygen output.
-USE_MDFILE_AS_MAINPAGE =
+USE_MDFILE_AS_MAINPAGE =
#---------------------------------------------------------------------------
# Configuration options related to source browsing
@@ -1013,7 +1013,7 @@ CLANG_ASSISTED_PARSING = NO
# specified with INPUT and INCLUDE_PATH.
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-CLANG_OPTIONS =
+CLANG_OPTIONS =
#---------------------------------------------------------------------------
# Configuration options related to the alphabetical class index
@@ -1039,7 +1039,7 @@ COLS_IN_ALPHA_INDEX = 5
# while generating the index headers.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-IGNORE_PREFIX =
+IGNORE_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the HTML output
@@ -1083,7 +1083,7 @@ HTML_FILE_EXTENSION = .html
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
-HTML_HEADER =
+HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
# generated HTML page. If the tag is left blank doxygen will generate a standard
@@ -1093,7 +1093,7 @@ HTML_HEADER =
# that doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
-HTML_FOOTER =
+HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
@@ -1105,7 +1105,7 @@ HTML_FOOTER =
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.
-HTML_STYLESHEET =
+HTML_STYLESHEET =
# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# cascading style sheets that are included after the standard style sheets
@@ -1118,7 +1118,7 @@ HTML_STYLESHEET =
# list). For an example see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
-HTML_EXTRA_STYLESHEET =
+HTML_EXTRA_STYLESHEET =
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
@@ -1128,7 +1128,7 @@ HTML_EXTRA_STYLESHEET =
# files will be copied as-is; there are no commands or markers available.
# This tag requires that the tag GENERATE_HTML is set to YES.
-HTML_EXTRA_FILES =
+HTML_EXTRA_FILES =
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the stylesheet and background images according to
@@ -1256,7 +1256,7 @@ GENERATE_HTMLHELP = NO
# written to the html output directory.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-CHM_FILE =
+CHM_FILE =
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler ( hhc.exe). If non-empty
@@ -1264,7 +1264,7 @@ CHM_FILE =
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-HHC_LOCATION =
+HHC_LOCATION =
# The GENERATE_CHI flag controls if a separate .chi index file is generated (
# YES) or that it should be included in the master .chm file ( NO).
@@ -1277,7 +1277,7 @@ GENERATE_CHI = NO
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-CHM_INDEX_ENCODING =
+CHM_INDEX_ENCODING =
# The BINARY_TOC flag controls whether a binary table of contents is generated (
# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
@@ -1308,7 +1308,7 @@ GENERATE_QHP = NO
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.
-QCH_FILE =
+QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
@@ -1333,7 +1333,7 @@ QHP_VIRTUAL_FOLDER = doc
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHP_CUST_FILTER_NAME =
+QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
@@ -1341,21 +1341,21 @@ QHP_CUST_FILTER_NAME =
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHP_CUST_FILTER_ATTRS =
+QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHP_SECT_FILTER_ATTRS =
+QHP_SECT_FILTER_ATTRS =
# The QHG_LOCATION tag can be used to specify the location of Qt's
# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
# generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
-QHG_LOCATION =
+QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
@@ -1488,7 +1488,7 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
# This tag requires that the tag USE_MATHJAX is set to YES.
-MATHJAX_EXTENSIONS =
+MATHJAX_EXTENSIONS =
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
# of code that will be used on startup of the MathJax code. See the MathJax site
@@ -1496,7 +1496,7 @@ MATHJAX_EXTENSIONS =
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
-MATHJAX_CODEFILE =
+MATHJAX_CODEFILE =
# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
# the HTML output. The underlying search engine uses javascript and DHTML and
@@ -1556,7 +1556,7 @@ EXTERNAL_SEARCH = NO
# Searching" for details.
# This tag requires that the tag SEARCHENGINE is set to YES.
-SEARCHENGINE_URL =
+SEARCHENGINE_URL =
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
# search data is written to a file for indexing by an external tool. With the
@@ -1572,7 +1572,7 @@ SEARCHDATA_FILE = searchdata.xml
# projects and redirect the results back to the right project.
# This tag requires that the tag SEARCHENGINE is set to YES.
-EXTERNAL_SEARCH_ID =
+EXTERNAL_SEARCH_ID =
# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
# projects other than the one defined by this configuration file, but that are
@@ -1582,7 +1582,7 @@ EXTERNAL_SEARCH_ID =
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
# This tag requires that the tag SEARCHENGINE is set to YES.
-EXTRA_SEARCH_MAPPINGS =
+EXTRA_SEARCH_MAPPINGS =
#---------------------------------------------------------------------------
# Configuration options related to the LaTeX output
@@ -1643,7 +1643,7 @@ PAPER_TYPE = a4
# If left blank no extra packages will be included.
# This tag requires that the tag GENERATE_LATEX is set to YES.
-EXTRA_PACKAGES =
+EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
# generated LaTeX document. The header should contain everything until the first
@@ -1659,7 +1659,7 @@ EXTRA_PACKAGES =
# HTML_HEADER.
# This tag requires that the tag GENERATE_LATEX is set to YES.
-LATEX_HEADER =
+LATEX_HEADER =
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
# generated LaTeX document. The footer should contain everything after the last
@@ -1670,7 +1670,7 @@ LATEX_HEADER =
# Note: Only use a user-defined footer if you know what you are doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.
-LATEX_FOOTER =
+LATEX_FOOTER =
# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the LATEX_OUTPUT output
@@ -1678,7 +1678,7 @@ LATEX_FOOTER =
# markers available.
# This tag requires that the tag GENERATE_LATEX is set to YES.
-LATEX_EXTRA_FILES =
+LATEX_EXTRA_FILES =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
@@ -1778,14 +1778,14 @@ RTF_HYPERLINKS = NO
# default style sheet that doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.
-RTF_STYLESHEET_FILE =
+RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
# similar to doxygen's config file. A template extensions file can be generated
# using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
-RTF_EXTENSIONS_FILE =
+RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# Configuration options related to the man page output
@@ -1820,7 +1820,7 @@ MAN_EXTENSION = .3
# MAN_EXTENSION with the initial . removed.
# This tag requires that the tag GENERATE_MAN is set to YES.
-MAN_SUBDIR =
+MAN_SUBDIR =
# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
# will generate one additional man file for each entity documented in the real
@@ -1933,7 +1933,7 @@ PERLMOD_PRETTY = YES
# overwrite each other's variables.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-PERLMOD_MAKEVAR_PREFIX =
+PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
@@ -1974,7 +1974,7 @@ SEARCH_INCLUDES = YES
# preprocessor.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-INCLUDE_PATH =
+INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
@@ -1982,7 +1982,7 @@ INCLUDE_PATH =
# used.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-INCLUDE_FILE_PATTERNS =
+INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that are
# defined before the preprocessor is started (similar to the -D option of e.g.
@@ -1992,7 +1992,7 @@ INCLUDE_FILE_PATTERNS =
# recursively expanded use the := operator instead of the = operator.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-PREDEFINED =
+PREDEFINED =
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
# tag can be used to specify a list of macro names that should be expanded. The
@@ -2001,7 +2001,7 @@ PREDEFINED =
# definition found in the source code.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-EXPAND_AS_DEFINED =
+EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
# remove all references to function-like macros that are alone on a line, have
@@ -2030,13 +2030,13 @@ SKIP_FUNCTION_MACROS = YES
# the path). If a tag file is not located in the directory in which doxygen is
# run, you must also specify the path to the tagfile here.
-TAGFILES =
+TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
# tag file that is based on the input files it reads. See section "Linking to
# external documentation" for more information about the usage of tag files.
-GENERATE_TAGFILE =
+GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
# class index. If set to NO only the inherited external classes will be listed.
@@ -2084,14 +2084,14 @@ CLASS_DIAGRAMS = YES
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
-MSCGEN_PATH =
+MSCGEN_PATH =
# You can include diagrams made with dia in doxygen documentation. Doxygen will
# then run dia to produce the diagram and insert it in the documentation. The
# DIA_PATH tag allows you to specify the directory where the dia binary resides.
# If left empty dia is assumed to be found in the default search path.
-DIA_PATH =
+DIA_PATH =
# If set to YES, the inheritance and collaboration graphs will hide inheritance
# and usage relations if the target is undocumented or is not a class.
@@ -2140,7 +2140,7 @@ DOT_FONTSIZE = 10
# the path where dot can find it using this tag.
# This tag requires that the tag HAVE_DOT is set to YES.
-DOT_FONTPATH =
+DOT_FONTPATH =
# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
# each documented class showing the direct and indirect inheritance relations.
@@ -2278,26 +2278,26 @@ INTERACTIVE_SVG = NO
# found. If left blank, it is assumed the dot tool can be found in the path.
# This tag requires that the tag HAVE_DOT is set to YES.
-DOT_PATH =
+DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the \dotfile
# command).
# This tag requires that the tag HAVE_DOT is set to YES.
-DOTFILE_DIRS =
+DOTFILE_DIRS =
# The MSCFILE_DIRS tag can be used to specify one or more directories that
# contain msc files that are included in the documentation (see the \mscfile
# command).
-MSCFILE_DIRS =
+MSCFILE_DIRS =
# The DIAFILE_DIRS tag can be used to specify one or more directories that
# contain dia files that are included in the documentation (see the \diafile
# command).
-DIAFILE_DIRS =
+DIAFILE_DIRS =
# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
# path where java can find the plantuml.jar file. If left blank, it is assumed
@@ -2306,7 +2306,7 @@ DIAFILE_DIRS =
# will not generate output for the diagram.
# This tag requires that the tag HAVE_DOT is set to YES.
-PLANTUML_JAR_PATH =
+PLANTUML_JAR_PATH =
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
# that will be shown in the graph. If the number of nodes in a graph becomes