diff options
Diffstat (limited to 'mpg123.32')
| -rw-r--r-- | mpg123.32/dist/libmpg123-0.dll | bin | 0 -> 343552 bytes | |||
| -rw-r--r-- | mpg123.32/dist/libmpg123.dll | bin | 150528 -> 0 bytes | |||
| -rw-r--r-- | mpg123.32/include/fmt123.h | 159 | ||||
| -rw-r--r-- | mpg123.32/include/mpg123.h | 1209 | ||||
| -rw-r--r-- | mpg123.32/lib/libmpg123-0.lib | bin | 0 -> 34076 bytes | |||
| -rw-r--r-- | mpg123.32/lib/libmpg123.lib | bin | 19996 -> 0 bytes |
6 files changed, 1095 insertions, 273 deletions
diff --git a/mpg123.32/dist/libmpg123-0.dll b/mpg123.32/dist/libmpg123-0.dll Binary files differnew file mode 100644 index 00000000..07bfef0c --- /dev/null +++ b/mpg123.32/dist/libmpg123-0.dll diff --git a/mpg123.32/dist/libmpg123.dll b/mpg123.32/dist/libmpg123.dll Binary files differdeleted file mode 100644 index ccb429bf..00000000 --- a/mpg123.32/dist/libmpg123.dll +++ /dev/null diff --git a/mpg123.32/include/fmt123.h b/mpg123.32/include/fmt123.h new file mode 100644 index 00000000..dcabf5e0 --- /dev/null +++ b/mpg123.32/include/fmt123.h @@ -0,0 +1,159 @@ +/* + libmpg123: MPEG Audio Decoder library + + separate header just for audio format definitions not tied to + library code + + copyright 1995-2020 by the mpg123 project + free software under the terms of the LGPL 2.1 + see COPYING and AUTHORS files in distribution or http://mpg123.org +*/ + +#ifndef MPG123_ENC_H +#define MPG123_ENC_H + +/** \file fmt123.h Audio format definitions. */ + +/** \defgroup mpg123_enc mpg123 PCM sample encodings + * These are definitions for audio formats used by libmpg123 and + * libout123. + * + * @{ + */ + +/** An enum over all sample types possibly known to mpg123. + * The values are designed as bit flags to allow bitmasking for encoding + * families. + * This is also why the enum is not used as type for actual encoding variables, + * plain integers (at least 16 bit, 15 bit being used) cover the possible + * combinations of these flags. + * + * Note that (your build of) libmpg123 does not necessarily support all these. + * Usually, you can expect the 8bit encodings and signed 16 bit. + * Also 32bit float will be usual beginning with mpg123-1.7.0 . + * What you should bear in mind is that (SSE, etc) optimized routines may be + * absent for some formats. We do have SSE for 16, 32 bit and float, though. + * 24 bit integer is done via postprocessing of 32 bit output -- just cutting + * the last byte, no rounding, even. If you want better, do it yourself. + * + * All formats are in native byte order. If you need different endinaness, you + * can simply postprocess the output buffers (libmpg123 wouldn't do anything + * else). The macro MPG123_SAMPLESIZE() can be helpful there. + */ +enum mpg123_enc_enum +{ +/* 0000 0000 0000 1111 Some 8 bit integer encoding. */ + MPG123_ENC_8 = 0x00f +/* 0000 0000 0100 0000 Some 16 bit integer encoding. */ +, MPG123_ENC_16 = 0x040 +/* 0100 0000 0000 0000 Some 24 bit integer encoding. */ +, MPG123_ENC_24 = 0x4000 +/* 0000 0001 0000 0000 Some 32 bit integer encoding. */ +, MPG123_ENC_32 = 0x100 +/* 0000 0000 1000 0000 Some signed integer encoding. */ +, MPG123_ENC_SIGNED = 0x080 +/* 0000 1110 0000 0000 Some float encoding. */ +, MPG123_ENC_FLOAT = 0xe00 +/* 0000 0000 1101 0000 signed 16 bit */ +, MPG123_ENC_SIGNED_16 = (MPG123_ENC_16|MPG123_ENC_SIGNED|0x10) +/* 0000 0000 0110 0000 unsigned 16 bit */ +, MPG123_ENC_UNSIGNED_16 = (MPG123_ENC_16|0x20) +/* 0000 0000 0000 0001 unsigned 8 bit */ +, MPG123_ENC_UNSIGNED_8 = 0x01 +/* 0000 0000 1000 0010 signed 8 bit */ +, MPG123_ENC_SIGNED_8 = (MPG123_ENC_SIGNED|0x02) +/* 0000 0000 0000 0100 ulaw 8 bit */ +, MPG123_ENC_ULAW_8 = 0x04 +/* 0000 0000 0000 1000 alaw 8 bit */ +, MPG123_ENC_ALAW_8 = 0x08 +/* 0001 0001 1000 0000 signed 32 bit */ +, MPG123_ENC_SIGNED_32 = MPG123_ENC_32|MPG123_ENC_SIGNED|0x1000 +/* 0010 0001 0000 0000 unsigned 32 bit */ +, MPG123_ENC_UNSIGNED_32 = MPG123_ENC_32|0x2000 +/* 0101 0000 1000 0000 signed 24 bit */ +, MPG123_ENC_SIGNED_24 = MPG123_ENC_24|MPG123_ENC_SIGNED|0x1000 +/* 0110 0000 0000 0000 unsigned 24 bit */ +, MPG123_ENC_UNSIGNED_24 = MPG123_ENC_24|0x2000 +/* 0000 0010 0000 0000 32bit float */ +, MPG123_ENC_FLOAT_32 = 0x200 +/* 0000 0100 0000 0000 64bit float */ +, MPG123_ENC_FLOAT_64 = 0x400 +/* Any possibly known encoding from the list above. */ +, MPG123_ENC_ANY = ( MPG123_ENC_SIGNED_16 | MPG123_ENC_UNSIGNED_16 + | MPG123_ENC_UNSIGNED_8 | MPG123_ENC_SIGNED_8 + | MPG123_ENC_ULAW_8 | MPG123_ENC_ALAW_8 + | MPG123_ENC_SIGNED_32 | MPG123_ENC_UNSIGNED_32 + | MPG123_ENC_SIGNED_24 | MPG123_ENC_UNSIGNED_24 + | MPG123_ENC_FLOAT_32 | MPG123_ENC_FLOAT_64 ) +}; + +/** Get size of one PCM sample with given encoding. + * This is included both in libmpg123 and libout123. Both offer + * an API function to provide the macro results from library + * compile-time, not that of you application. This most likely + * does not matter as I do not expect any fresh PCM sample + * encoding to appear. But who knows? Perhaps the encoding type + * will be abused for funny things in future, not even plain PCM. + * And, by the way: Thomas really likes the ?: operator. + * \param enc the encoding (mpg123_enc_enum value) + * \return size of one sample in bytes + */ +#define MPG123_SAMPLESIZE(enc) ( \ + (enc) < 1 \ + ? 0 \ + : ( (enc) & MPG123_ENC_8 \ + ? 1 \ + : ( (enc) & MPG123_ENC_16 \ + ? 2 \ + : ( (enc) & MPG123_ENC_24 \ + ? 3 \ + : ( ( (enc) & MPG123_ENC_32 \ + || (enc) == MPG123_ENC_FLOAT_32 ) \ + ? 4 \ + : ( (enc) == MPG123_ENC_FLOAT_64 \ + ? 8 \ + : 0 \ +) ) ) ) ) ) + +/** Representation of zero in differing encodings. + * This exists to define proper silence in various encodings without + * having to link to libsyn123 to do actual conversions at runtime. + * You have to handle big/little endian order yourself, though. + * This takes the shortcut that any signed encoding has a zero with + * all-zero bits. Unsigned linear encodings just have the highest bit set + * (2^(n-1) for n bits), while the nonlinear 8-bit ones are special. + * \param enc the encoding (mpg123_enc_enum value) + * \param siz bytes per sample (return value of MPG123_SAMPLESIZE(enc)) + * \param off byte (octet) offset counted from LSB + * \return unsigned byte value for the designated octet + */ +#define MPG123_ZEROSAMPLE(enc, siz, off) ( \ + (enc) == MPG123_ENC_ULAW_8 \ + ? (off == 0 ? 0xff : 0x00) \ + : ( (enc) == MPG123_ENC_ALAW_8 \ + ? (off == 0 ? 0xd5 : 0x00) \ + : ( (((enc) & (MPG123_ENC_SIGNED|MPG123_ENC_FLOAT)) || (siz) != ((off)+1)) \ + ? 0x00 \ + : 0x80 \ + ) ) ) + +/** Structure defining an audio format. + * Providing the members as individual function arguments to define a certain + * output format is easy enough. This struct makes is more comfortable to deal + * with a list of formats. + * Negative values for the members might be used to communicate use of default + * values. + */ +struct mpg123_fmt +{ + long rate; /**< sampling rate in Hz */ + int channels; /**< channel count */ + /** encoding code, can be single value or bitwise or of members of + * mpg123_enc_enum */ + int encoding; +}; + +/* @} */ + +#endif + diff --git a/mpg123.32/include/mpg123.h b/mpg123.32/include/mpg123.h index 03cf9197..7b0a8495 100644 --- a/mpg123.32/include/mpg123.h +++ b/mpg123.32/include/mpg123.h @@ -1,33 +1,53 @@ /* - libmpg123: MPEG Audio Decoder library (version 1.13.4) + libmpg123: MPEG Audio Decoder library (version 1.26.3) - copyright 1995-2010 by the mpg123 project - free software under the terms of the LGPL 2.1 + copyright 1995-2015 by the mpg123 project + free software under the terms of the LGPL 2.1 see COPYING and AUTHORS files in distribution or http://mpg123.org */ #ifndef MPG123_LIB_H #define MPG123_LIB_H -/** \file mpg123.h The header file for the libmpg123 MPEG Audio decoder */ +#include <fmt123.h> -/* A macro to check at compile time which set of API functions to expect. - This should be incremented at least each time a new symbol is added to the header. */ -#define MPG123_API_VERSION 29 +/** \file mpg123.h The header file for the libmpg123 MPEG Audio decoder */ -/* These aren't actually in use... seems to work without using libtool. */ +/** A macro to check at compile time which set of API functions to expect. + * This should be incremented at least each time a new symbol is added + * to the header. + */ +#define MPG123_API_VERSION 45 + +#ifndef MPG123_EXPORT +/** Defines needed for MS Visual Studio(tm) DLL builds. + * Every public function must be prefixed with MPG123_EXPORT. When building + * the DLL ensure to define BUILD_MPG123_DLL. This makes the function accessible + * for clients and includes it in the import library which is created together + * with the DLL. When consuming the DLL ensure to define LINK_MPG123_DLL which + * imports the functions from the DLL. + */ #ifdef BUILD_MPG123_DLL /* The dll exports. */ -#define EXPORT __declspec(dllexport) +#define MPG123_EXPORT __declspec(dllexport) #else #ifdef LINK_MPG123_DLL /* The exe imports. */ -#define EXPORT __declspec(dllimport) +#define MPG123_EXPORT __declspec(dllimport) #else /* Nothing on normal/UNIX builds */ -#define EXPORT +#define MPG123_EXPORT +#endif #endif #endif +/* This is for Visual Studio, so this header works as distributed in the binary downloads */ +#if defined(_MSC_VER) && !defined(MPG123_DEF_SSIZE_T) +#define MPG123_DEF_SSIZE_T +#include <stddef.h> +typedef ptrdiff_t ssize_t; +#endif + #ifndef MPG123_NO_CONFIGURE /* Enable use of this file without configure. */ #include <stdlib.h> #include <sys/types.h> @@ -63,6 +83,7 @@ #endif #define MPG123_LARGENAME(func) MPG123_MACROCAT(func, MPG123_LARGESUFFIX) +#define mpg123_open_fixed MPG123_LARGENAME(mpg123_open_fixed) #define mpg123_open MPG123_LARGENAME(mpg123_open) #define mpg123_open_fd MPG123_LARGENAME(mpg123_open_fd) #define mpg123_open_handle MPG123_LARGENAME(mpg123_open_handle) @@ -79,9 +100,11 @@ #define mpg123_set_index MPG123_LARGENAME(mpg123_set_index) #define mpg123_position MPG123_LARGENAME(mpg123_position) #define mpg123_length MPG123_LARGENAME(mpg123_length) +#define mpg123_framelength MPG123_LARGENAME(mpg123_framelength) #define mpg123_set_filesize MPG123_LARGENAME(mpg123_set_filesize) #define mpg123_replace_reader MPG123_LARGENAME(mpg123_replace_reader) #define mpg123_replace_reader_handle MPG123_LARGENAME(mpg123_replace_reader_handle) +#define mpg123_framepos MPG123_LARGENAME(mpg123_framepos) #endif /* largefile hackery */ @@ -109,31 +132,47 @@ struct mpg123_handle_struct; typedef struct mpg123_handle_struct mpg123_handle; /** Function to initialise the mpg123 library. - * This function is not thread-safe. Call it exactly once per process, before any other (possibly threaded) work with the library. + * This should be called once in a non-parallel context. It is not explicitly + * thread-safe, but repeated/concurrent calls still _should_ be safe as static + * tables are filled with the same values anyway. * * \return MPG123_OK if successful, otherwise an error number. */ -EXPORT int mpg123_init(void); +MPG123_EXPORT int mpg123_init(void); -/** Function to close down the mpg123 library. - * This function is not thread-safe. Call it exactly once per process, before any other (possibly threaded) work with the library. */ -EXPORT void mpg123_exit(void); +/** Superfluous Function to close down the mpg123 library. + * This was created with the thought that there sometime will be cleanup code + * to be run after library use. This never materialized. You can forget about + * this function and it is only here for old programs that do call it. + */ +MPG123_EXPORT void mpg123_exit(void); /** Create a handle with optional choice of decoder (named by a string, see mpg123_decoders() or mpg123_supported_decoders()). * and optional retrieval of an error code to feed to mpg123_plain_strerror(). * Optional means: Any of or both the parameters may be NULL. * - * \return Non-NULL pointer when successful. + * \param decoder optional choice of decoder variant (NULL for default) + * \param error optional address to store error codes + * \return Non-NULL pointer to fresh handle when successful. */ -EXPORT mpg123_handle *mpg123_new(const char* decoder, int *error); +MPG123_EXPORT mpg123_handle *mpg123_new(const char* decoder, int *error); -/** Delete handle, mh is either a valid mpg123 handle or NULL. */ -EXPORT void mpg123_delete(mpg123_handle *mh); +/** Delete handle, mh is either a valid mpg123 handle or NULL. + * \param mh handle + */ +MPG123_EXPORT void mpg123_delete(mpg123_handle *mh); + +/** Free plain memory allocated within libmpg123. + * This is for library users that are not sure to use the same underlying + * memory allocator as libmpg123. It is just a wrapper over free() in + * the underlying C library. + */ +MPG123_EXPORT void mpg123_free(void *ptr); /** Enumeration of the parameters types that it is possible to set/get. */ enum mpg123_parms { - MPG123_VERBOSE, /**< set verbosity value for enabling messages to stderr, >= 0 makes sense (integer) */ + MPG123_VERBOSE = 0, /**< set verbosity value for enabling messages to stderr, >= 0 makes sense (integer) */ MPG123_FLAGS, /**< set all flags, p.ex val = MPG123_GAPLESS|MPG123_MONO_MIX (integer) */ MPG123_ADD_FLAGS, /**< add some flags (integer) */ MPG123_FORCE_RATE, /**< when value > 0, force output rate to that value (integer) */ @@ -143,13 +182,21 @@ enum mpg123_parms MPG123_UPSPEED, /**< play every Nth frame (integer) */ MPG123_START_FRAME, /**< start with this frame (skip frames before that, integer) */ MPG123_DECODE_FRAMES, /**< decode only this number of frames (integer) */ - MPG123_ICY_INTERVAL, /**< stream contains ICY metadata with this interval (integer) */ + MPG123_ICY_INTERVAL, /**< Stream contains ICY metadata with this interval (integer). + Make sure to set this _before_ opening a stream.*/ MPG123_OUTSCALE, /**< the scale for output samples (amplitude - integer or float according to mpg123 output format, normally integer) */ MPG123_TIMEOUT, /**< timeout for reading from a stream (not supported on win32, integer) */ MPG123_REMOVE_FLAGS, /**< remove some flags (inverse of MPG123_ADD_FLAGS, integer) */ - MPG123_RESYNC_LIMIT, /**< Try resync on frame parsing for that many bytes or until end of stream (<0 ... integer). */ + MPG123_RESYNC_LIMIT, /**< Try resync on frame parsing for that many bytes or until end of stream (<0 ... integer). This can enlarge the limit for skipping junk on beginning, too (but not reduce it). */ MPG123_INDEX_SIZE /**< Set the frame index size (if supported). Values <0 mean that the index is allowed to grow dynamically in these steps (in positive direction, of course) -- Use this when you really want a full index with every individual frame. */ ,MPG123_PREFRAMES /**< Decode/ignore that many frames in advance for layer 3. This is needed to fill bit reservoir after seeking, for example (but also at least one frame in advance is needed to have all "normal" data for layer 3). Give a positive integer value, please.*/ + ,MPG123_FEEDPOOL /**< For feeder mode, keep that many buffers in a pool to avoid frequent malloc/free. The pool is allocated on mpg123_open_feed(). If you change this parameter afterwards, you can trigger growth and shrinkage during decoding. The default value could change any time. If you care about this, then set it. (integer) */ + ,MPG123_FEEDBUFFER /**< Minimal size of one internal feeder buffer, again, the default value is subject to change. (integer) */ + ,MPG123_FREEFORMAT_SIZE /**< Tell the parser a free-format frame size to + * avoid read-ahead to get it. A value of -1 (default) means that the parser + * will determine it. The parameter value is applied during decoder setup + * for a freshly opened stream only. + */ }; /** Flag bits for MPG123_FLAGS, use the usual binary or to combine. */ @@ -170,6 +217,47 @@ enum mpg123_param_flags ,MPG123_PLAIN_ID3TEXT = 0x800 /**< 100000000000 Do not translate ID3 text data to UTF-8. ID3 strings will contain the raw text data, with the first byte containing the ID3 encoding code. */ ,MPG123_IGNORE_STREAMLENGTH = 0x1000 /**< 1000000000000 Ignore any stream length information contained in the stream, which can be contained in a 'TLEN' frame of an ID3v2 tag or a Xing tag */ ,MPG123_SKIP_ID3V2 = 0x2000 /**< 10 0000 0000 0000 Do not parse ID3v2 tags, just skip them. */ + ,MPG123_IGNORE_INFOFRAME = 0x4000 /**< 100 0000 0000 0000 Do not parse the LAME/Xing info frame, treat it as normal MPEG data. */ + ,MPG123_AUTO_RESAMPLE = 0x8000 /**< 1000 0000 0000 0000 Allow automatic internal resampling of any kind (default on if supported). Especially when going lowlevel with replacing output buffer, you might want to unset this flag. Setting MPG123_DOWNSAMPLE or MPG123_FORCE_RATE will override this. */ + ,MPG123_PICTURE = 0x10000 /**< 17th bit: Enable storage of pictures from tags (ID3v2 APIC). */ + ,MPG123_NO_PEEK_END = 0x20000 /**< 18th bit: Do not seek to the end of + * the stream in order to probe + * the stream length and search for the id3v1 field. This also means + * the file size is unknown unless set using mpg123_set_filesize() and + * the stream is assumed as non-seekable unless overridden. + */ + ,MPG123_FORCE_SEEKABLE = 0x40000 /**< 19th bit: Force the stream to be seekable. */ + ,MPG123_STORE_RAW_ID3 = 0x80000 /**< store raw ID3 data (even if skipping) */ + ,MPG123_FORCE_ENDIAN = 0x100000 /**< Enforce endianess of output samples. + * This is not reflected in the format codes. If this flag is set along with + * MPG123_BIG_ENDIAN, MPG123_ENC_SIGNED16 means s16be, without + * MPG123_BIG_ENDIAN, it means s16le. Normal operation without + * MPG123_FORCE_ENDIAN produces output in native byte order. + */ + ,MPG123_BIG_ENDIAN = 0x200000 /**< Choose big endian instead of little. */ + ,MPG123_NO_READAHEAD = 0x400000 /**< Disable read-ahead in parser. If + * you know you provide full frames to the feeder API, this enables + * decoder output from the first one on, instead of having to wait for + * the next frame to confirm that the stream is healthy. It also disables + * free format support unless you provide a frame size using + * MPG123_FREEFORMAT_SIZE. + */ + ,MPG123_FLOAT_FALLBACK = 0x800000 /**< Consider floating point output encoding only after + * trying other (possibly downsampled) rates and encodings first. This is to + * support efficient playback where floating point output is only configured for + * an external resampler, bypassing that resampler when the desired rate can + * be produced directly. This is enabled by default to be closer to older versions + * of libmpg123 which did not enable float automatically at all. If disabled, + * float is considered after the 16 bit default and higher-bit integer encodings + * for any rate. */ + ,MPG123_NO_FRANKENSTEIN = 0x1000000 /**< Disable support for Frankenstein streams + * (different MPEG streams stiched together). Do not accept serious change of MPEG + * header inside a single stream. With this flag, the audio output format cannot + * change during decoding unless you open a new stream. This also stops decoding + * after an announced end of stream (Info header contained a number of frames + * and this number has been reached). This makes your MP3 files behave more like + * ordinary media files with defined structure, rather than stream dumps with + * some sugar. */ }; /** choices for MPG123_RVA */ @@ -181,15 +269,27 @@ enum mpg123_param_rva ,MPG123_RVA_MAX = MPG123_RVA_ALBUM /**< The maximum RVA code, may increase in future. */ }; -/* TODO: Assess the possibilities and troubles of changing parameters during playback. */ - /** Set a specific parameter, for a specific mpg123_handle, using a parameter - * type key chosen from the mpg123_parms enumeration, to the specified value. */ -EXPORT int mpg123_param(mpg123_handle *mh, enum mpg123_parms type, long value, double fvalue); + * type key chosen from the mpg123_parms enumeration, to the specified value. + * \param mh handle + * \param type parameter choice + * \param value integer value + * \param fvalue floating point value + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_param( mpg123_handle *mh +, enum mpg123_parms type, long value, double fvalue ); /** Get a specific parameter, for a specific mpg123_handle. - * See the mpg123_parms enumeration for a list of available parameters. */ -EXPORT int mpg123_getparam(mpg123_handle *mh, enum mpg123_parms type, long *val, double *fval); + * See the mpg123_parms enumeration for a list of available parameters. + * \param mh handle + * \param type parameter choice + * \param value integer value return address + * \param fvalue floating point value return address + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_getparam( mpg123_handle *mh +, enum mpg123_parms type, long *value, double *fvalue ); /** Feature set available for query with mpg123_feature. */ enum mpg123_feature_set @@ -208,10 +308,28 @@ enum mpg123_feature_set ,MPG123_FEATURE_DECODE_NTOM /**< flexible rate decoding */ ,MPG123_FEATURE_PARSE_ICY /**< ICY support */ ,MPG123_FEATURE_TIMEOUT_READ /**< Reader with timeout (network). */ + ,MPG123_FEATURE_EQUALIZER /**< tunable equalizer */ + ,MPG123_FEATURE_MOREINFO /**< more info extraction (for frame analyzer) */ + ,MPG123_FEATURE_OUTPUT_FLOAT32 /**< 32 bit float output */ + ,MPG123_FEATURE_OUTPUT_FLOAT64 /**< 64 bit float output (usually never) */ }; -/** Query libmpg123 feature, 1 for success, 0 for unimplemented functions. */ -EXPORT int mpg123_feature(const enum mpg123_feature_set key); +/** Query libmpg123 features. + * \param key feature selection + * \return 1 for success, 0 for unimplemented functions + */ +MPG123_EXPORT int mpg123_feature(const enum mpg123_feature_set key); + +/** Query libmpg123 features with better ABI compatibility + * + * This is the same as mpg123_feature(), but this time not using + * the enum as argument. Compilers don't have to agree on the size of + * enums and hence they are not safe in public API. + * + * \param key feature selection + * \return 1 for success, 0 for unimplemented functions + */ +MPG123_EXPORT int mpg123_feature2(int key); /* @} */ @@ -221,9 +339,28 @@ EXPORT int mpg123_feature(const enum mpg123_feature_set key); * Functions to get text version of the error numbers and an enumeration * of the error codes returned by libmpg123. * - * Most functions operating on a mpg123_handle simply return MPG123_OK on success and MPG123_ERR on failure (setting the internal error variable of the handle to the specific error code). - * Decoding/seek functions may also return message codes MPG123_DONE, MPG123_NEW_FORMAT and MPG123_NEED_MORE (please read up on these on how to react!). - * The positive range of return values is used for "useful" values when appropriate. + * Most functions operating on a mpg123_handle simply return MPG123_OK (0) + * on success and MPG123_ERR (-1) on failure, setting the internal error + * variable of the handle to the specific error code. If there was not a valid + * (non-NULL) handle provided to a function operating on one, MPG123_BAD_HANDLE + * may be returned if this can not be confused with a valid positive return + * value. + * Meaning: A function expected to return positive integers on success will + * always indicate error or a special condition by returning a negative one. + * + * Decoding/seek functions may also return message codes MPG123_DONE, + * MPG123_NEW_FORMAT and MPG123_NEED_MORE (all negative, see below on how to + * react). Note that calls to those can be nested, so generally watch out + * for these codes after initial handle setup. + * Especially any function that needs information about the current stream + * to work will try to at least parse the beginning if that did not happen + * yet. + * + * On a function that is supposed to return MPG123_OK on success and + * MPG123_ERR on failure, make sure you check for != MPG123_OK, not + * == MPG123_ERR, as the error code could get more specific in future, + * or there is just a special message from a decoding routine as indicated + * above. * * @{ */ @@ -278,19 +415,29 @@ enum mpg123_errors ,MPG123_LSEEK_FAILED /**< Low-level seek failed. */ ,MPG123_BAD_CUSTOM_IO /**< Custom I/O not prepared. */ ,MPG123_LFS_OVERFLOW /**< Offset value overflow during translation of large file API calls -- your client program cannot handle that large file. */ + ,MPG123_INT_OVERFLOW /**< Some integer overflow. */ }; -/** Return a string describing that error errcode means. */ -EXPORT const char* mpg123_plain_strerror(int errcode); +/** Look up error strings given integer code. + * \param errcode integer error code + * \return string describing what that error error code means + */ +MPG123_EXPORT const char* mpg123_plain_strerror(int errcode); /** Give string describing what error has occured in the context of handle mh. * When a function operating on an mpg123 handle returns MPG123_ERR, you should check for the actual reason via * char *errmsg = mpg123_strerror(mh) - * This function will catch mh == NULL and return the message for MPG123_BAD_HANDLE. */ -EXPORT const char* mpg123_strerror(mpg123_handle *mh); + * This function will catch mh == NULL and return the message for MPG123_BAD_HANDLE. + * \param mh handle + * \return error message + */ +MPG123_EXPORT const char* mpg123_strerror(mpg123_handle *mh); -/** Return the plain errcode intead of a string. */ -EXPORT int mpg123_errcode(mpg123_handle *mh); +/** Return the plain errcode intead of a string. + * \param mh handle + * \return error code recorded in handle or MPG123_BAD_HANDLE + */ +MPG123_EXPORT int mpg123_errcode(mpg123_handle *mh); /*@}*/ @@ -303,21 +450,33 @@ EXPORT int mpg123_errcode(mpg123_handle *mh); * @{ */ -/** Return a NULL-terminated array of generally available decoder names (plain 8bit ASCII). */ -EXPORT const char **mpg123_decoders(void); - -/** Return a NULL-terminated array of the decoders supported by the CPU (plain 8bit ASCII). */ -EXPORT const char **mpg123_supported_decoders(void); +/** Get available decoder list. + * \return NULL-terminated array of generally available decoder names (plain 8bit ASCII) + */ +MPG123_EXPORT const char **mpg123_decoders(void); -/** Set the chosen decoder to 'decoder_name' */ -EXPORT int mpg123_decoder(mpg123_handle *mh, const char* decoder_name); +/** Get supported decoder list. + * \return NULL-terminated array of the decoders supported by the CPU (plain 8bit ASCII) + */ +MPG123_EXPORT const char **mpg123_supported_decoders(void); -/** Get the currently active decoder engine name. - The active decoder engine can vary depening on output constraints, - mostly non-resampling, integer output is accelerated via 3DNow & Co. but for other modes a fallback engine kicks in. - Note that this can return a decoder that is ony active in the hidden and not available as decoder choice from the outside. - \return The decoder name or NULL on error. */ -EXPORT const char* mpg123_current_decoder(mpg123_handle *mh); +/** Set the active decoder. + * \param mh handle + * \param decoder_name name of decoder + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_decoder(mpg123_handle *mh, const char* decoder_name); + +/** Get the currently active decoder name. + * The active decoder engine can vary depening on output constraints, + * mostly non-resampling, integer output is accelerated via 3DNow & Co. but for + * other modes a fallback engine kicks in. + * Note that this can return a decoder that is only active in the hidden and not + * available as decoder choice from the outside. + * \param mh handle + * \return The decoder name or NULL on error. + */ +MPG123_EXPORT const char* mpg123_current_decoder(mpg123_handle *mh); /*@}*/ @@ -326,100 +485,124 @@ EXPORT const char* mpg123_current_decoder(mpg123_handle *mh); * * Functions to get and select the format of the decoded audio. * - * @{ - */ - -/** An enum over all sample types possibly known to mpg123. - * The values are designed as bit flags to allow bitmasking for encoding families. + * Before you dive in, please be warned that you might get confused by this. + * This seems to happen a lot, therefore I am trying to explain in advance. + * If you do feel confused and just want to decode your normal MPEG audio files that + * don't alter properties in the middle, just use mpg123_open_fixed() with a fixed encoding + * and channel count and forget about a matrix of audio formats. If you want to get funky, + * read ahead ... + * + * The mpg123 library decides what output format to use when encountering the first frame in a stream, or actually any frame that is still valid but differs from the frames before in the prompted output format. At such a deciding point, an internal table of allowed encodings, sampling rates and channel setups is consulted. According to this table, an output format is chosen and the decoding engine set up accordingly (including optimized routines for different output formats). This might seem unusual but it just follows from the non-existence of "MPEG audio files" with defined overall properties. There are streams, streams are concatenations of (semi) independent frames. We store streams on disk and call them "MPEG audio files", but that does not change their nature as the decoder is concerned (the LAME/Xing header for gapless decoding makes things interesting again). + * + * To get to the point: What you do with mpg123_format() and friends is to fill the internal table of allowed formats before it is used. That includes removing support for some formats or adding your forced sample rate (see MPG123_FORCE_RATE) that will be used with the crude internal resampler. Also keep in mind that the sample encoding is just a question of choice -- the MPEG frames do only indicate their native sampling rate and channel count. If you want to decode to integer or float samples, 8 or 16 bit ... that is your decision. In a "clean" world, libmpg123 would always decode to 32 bit float and let you handle any sample conversion. But there are optimized routines that work faster by directly decoding to the desired encoding / accuracy. We prefer efficiency over conceptual tidyness. * - * Note that (your build of) libmpg123 does not necessarily support all these. - * Usually, you can expect the 8bit encodings and signed 16 bit. - * Also 32bit float will be usual beginning with mpg123-1.7.0 . - * What you should bear in mind is that (SSE, etc) optimized routines may be absent - * for some formats. We do have SSE for 16, 32 bit and float, though. - * 24 bit integer is done via postprocessing of 32 bit output -- just cutting - * the last byte, no rounding, even. If you want better, do it yourself. + * People often start out thinking that mpg123_format() should change the actual decoding format on the fly. That is wrong. It only has effect on the next natural change of output format, when libmpg123 will consult its format table again. To make life easier, you might want to call mpg123_format_none() before any thing else and then just allow one desired encoding and a limited set of sample rates / channel choices that you actually intend to deal with. You can force libmpg123 to decode everything to 44100 KHz, stereo, 16 bit integer ... it will duplicate mono channels and even do resampling if needed (unless that feature is disabled in the build, same with some encodings). But I have to stress that the resampling of libmpg123 is very crude and doesn't even contain any kind of "proper" interpolation. * - * All formats are in native byte order. If you need different endinaness, you - * can simply postprocess the output buffers (libmpg123 wouldn't do anything else). - * mpg123_encsize() can be helpful there. + * In any case, watch out for MPG123_NEW_FORMAT as return message from decoding routines and call mpg123_getformat() to get the currently active output format. + * + * @{ */ -enum mpg123_enc_enum -{ - MPG123_ENC_8 = 0x00f /**< 0000 0000 1111 Some 8 bit integer encoding. */ - ,MPG123_ENC_16 = 0x040 /**< 0000 0100 0000 Some 16 bit integer encoding. */ - ,MPG123_ENC_24 = 0x4000 /**< 0100 0000 0000 0000 Some 24 bit integer encoding. */ - ,MPG123_ENC_32 = 0x100 /**< 0001 0000 0000 Some 32 bit integer encoding. */ - ,MPG123_ENC_SIGNED = 0x080 /**< 0000 1000 0000 Some signed integer encoding. */ - ,MPG123_ENC_FLOAT = 0xe00 /**< 1110 0000 0000 Some float encoding. */ - ,MPG123_ENC_SIGNED_16 = (MPG123_ENC_16|MPG123_ENC_SIGNED|0x10) /**< 1101 0000 signed 16 bit */ - ,MPG123_ENC_UNSIGNED_16 = (MPG123_ENC_16|0x20) /**< 0110 0000 unsigned 16 bit */ - ,MPG123_ENC_UNSIGNED_8 = 0x01 /**< 0000 0001 unsigned 8 bit */ - ,MPG123_ENC_SIGNED_8 = (MPG123_ENC_SIGNED|0x02) /**< 1000 0010 signed 8 bit */ - ,MPG123_ENC_ULAW_8 = 0x04 /**< 0000 0100 ulaw 8 bit */ - ,MPG123_ENC_ALAW_8 = 0x08 /**< 0000 1000 alaw 8 bit */ - ,MPG123_ENC_SIGNED_32 = MPG123_ENC_32|MPG123_ENC_SIGNED|0x1000 /**< 0001 0001 1000 0000 signed 32 bit */ - ,MPG123_ENC_UNSIGNED_32 = MPG123_ENC_32|0x2000 /**< 0010 0001 0000 0000 unsigned 32 bit */ - ,MPG123_ENC_SIGNED_24 = MPG123_ENC_24|MPG123_ENC_SIGNED|0x1000 /**< 0101 0000 1000 0000 signed 24 bit */ - ,MPG123_ENC_UNSIGNED_24 = MPG123_ENC_24|0x2000 /**< 0110 0000 0000 0000 unsigned 24 bit */ - ,MPG123_ENC_FLOAT_32 = 0x200 /**< 0010 0000 0000 32bit float */ - ,MPG123_ENC_FLOAT_64 = 0x400 /**< 0100 0000 0000 64bit float */ - ,MPG123_ENC_ANY = ( MPG123_ENC_SIGNED_16 | MPG123_ENC_UNSIGNED_16 | MPG123_ENC_UNSIGNED_8 - | MPG123_ENC_SIGNED_8 | MPG123_ENC_ULAW_8 | MPG123_ENC_ALAW_8 - | MPG123_ENC_SIGNED_32 | MPG123_ENC_UNSIGNED_32 - | MPG123_ENC_SIGNED_24 | MPG123_ENC_UNSIGNED_24 - | MPG123_ENC_FLOAT_32 | MPG123_ENC_FLOAT_64 ) /**< Any encoding on the list. */ -}; /** They can be combined into one number (3) to indicate mono and stereo... */ enum mpg123_channelcount { - MPG123_MONO = 1 - ,MPG123_STEREO = 2 + MPG123_MONO = 1 /**< mono */ + ,MPG123_STEREO = 2 /**< stereo */ }; /** An array of supported standard sample rates * These are possible native sample rates of MPEG audio files. - * You can still force mpg123 to resample to a different one, but by default you will only get audio in one of these samplings. + * You can still force mpg123 to resample to a different one, but by + * default you will only get audio in one of these samplings. + * This list is in ascending order. * \param list Store a pointer to the sample rates array there. * \param number Store the number of sample rates there. */ -EXPORT void mpg123_rates(const long **list, size_t *number); +MPG123_EXPORT void mpg123_rates(const long **list, size_t *number); /** An array of supported audio encodings. * An audio encoding is one of the fully qualified members of mpg123_enc_enum (MPG123_ENC_SIGNED_16, not MPG123_SIGNED). * \param list Store a pointer to the encodings array there. * \param number Store the number of encodings there. */ -EXPORT void mpg123_encodings(const int **list, size_t *number); +MPG123_EXPORT void mpg123_encodings(const int **list, size_t *number); /** Return the size (in bytes) of one mono sample of the named encoding. * \param encoding The encoding value to analyze. * \return positive size of encoding in bytes, 0 on invalid encoding. */ -EXPORT int mpg123_encsize(int encoding); +MPG123_EXPORT int mpg123_encsize(int encoding); /** Configure a mpg123 handle to accept no output format at all, - * use before specifying supported formats with mpg123_format */ -EXPORT int mpg123_format_none(mpg123_handle *mh); + * use before specifying supported formats with mpg123_format + * \param mh handle + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_format_none(mpg123_handle *mh); /** Configure mpg123 handle to accept all formats - * (also any custom rate you may set) -- this is default. */ -EXPORT int mpg123_format_all(mpg123_handle *mh); + * (also any custom rate you may set) -- this is default. + * \param mh handle + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_format_all(mpg123_handle *mh); /** Set the audio format support of a mpg123_handle in detail: - * \param mh audio decoder handle + * \param mh handle * \param rate The sample rate value (in Hertz). * \param channels A combination of MPG123_STEREO and MPG123_MONO. * \param encodings A combination of accepted encodings for rate and channels, p.ex MPG123_ENC_SIGNED16 | MPG123_ENC_ULAW_8 (or 0 for no support). Please note that some encodings may not be supported in the library build and thus will be ignored here. * \return MPG123_OK on success, MPG123_ERR if there was an error. */ -EXPORT int mpg123_format(mpg123_handle *mh, long rate, int channels, int encodings); +MPG123_EXPORT int mpg123_format( mpg123_handle *mh +, long rate, int channels, int encodings ); + +/** Set the audio format support of a mpg123_handle in detail: + * \param mh handle + * \param rate The sample rate value (in Hertz). Special value 0 means + * all rates (the reason for this variant of mpg123_format()). + * \param channels A combination of MPG123_STEREO and MPG123_MONO. + * \param encodings A combination of accepted encodings for rate and channels, + * p.ex MPG123_ENC_SIGNED16 | MPG123_ENC_ULAW_8 (or 0 for no support). + * Please note that some encodings may not be supported in the library build + * and thus will be ignored here. + * \return MPG123_OK on success, MPG123_ERR if there was an error. */ +MPG123_EXPORT int mpg123_format2( mpg123_handle *mh +, long rate, int channels, int encodings ); /** Check to see if a specific format at a specific rate is supported * by mpg123_handle. + * \param mh handle + * \param rate sampling rate + * \param encoding encoding * \return 0 for no support (that includes invalid parameters), MPG123_STEREO, * MPG123_MONO or MPG123_STEREO|MPG123_MONO. */ -EXPORT int mpg123_format_support(mpg123_handle *mh, long rate, int encoding); - -/** Get the current output format written to the addresses givenr. */ -EXPORT int mpg123_getformat(mpg123_handle *mh, long *rate, int *channels, int *encoding); +MPG123_EXPORT int mpg123_format_support( mpg123_handle *mh +, long rate, int encoding ); + +/** Get the current output format written to the addresses given. + * If the stream is freshly loaded, this will try to parse enough + * of it to give you the format to come. This clears the flag that + * would otherwise make the first decoding call return + * MPG123_NEW_FORMAT. + * \param mh handle + * \param rate sampling rate return address + * \param channels channel count return address + * \param encoding encoding return address + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_getformat( mpg123_handle *mh +, long *rate, int *channels, int *encoding ); + +/** Get the current output format written to the addresses given. + * This differs from plain mpg123_getformat() in that you can choose + * _not_ to clear the flag that would trigger the next decoding call + * to return MPG123_NEW_FORMAT in case of a new format arriving. + * \param mh handle + * \param rate sampling rate return address + * \param channels channel count return address + * \param encoding encoding return address + * \param clear_flag if true, clear internal format flag + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_getformat2( mpg123_handle *mh +, long *rate, int *channels, int *encoding, int clear_flag ); /*@}*/ @@ -431,47 +614,116 @@ EXPORT int mpg123_getformat(mpg123_handle *mh, long *rate, int *channels, int *e * @{ */ -/* reading samples / triggering decoding, possible return values: */ -/** Enumeration of the error codes returned by libmpg123 functions. */ +/** Open a simple MPEG file with fixed properties. + * + * This function shall simplify the common use case of a plain MPEG + * file on disk that you want to decode, with one fixed sample + * rate and channel count, and usually a length defined by a Lame/Info/Xing + * tag. It will: + * + * - set the MPG123_NO_FRANKENSTEIN flag + * - set up format support according to given parameters, + * - open the file, + * - query audio format, + * - fix the audio format support table to ensure the format stays the same, + * - call mpg123_scan() if there is no header frame to tell the track length. + * + * From that on, you can call mpg123_getformat() for querying the sample + * rate (and channel count in case you allowed both) and mpg123_length() + * to get a pretty safe number for the duration. + * Only the sample rate is left open as that indeed is a fixed property of + * MPEG files. You could set MPG123_FORCE_RATE beforehand, but that may trigger + * low-quality resampling in the decoder, only do so if in dire need. + * The library will convert mono files to stereo for you, and vice versa. + * If any constraint cannot be satisified (most likely because of a non-default + * build of libmpg123), you get MPG123_ERR returned and can query the detailed + * cause from the handle. Only on MPG123_OK there will an open file that you + * then close using mpg123_close(), or implicitly on mpg123_delete() or the next + * call to open another file. + * + * So, for your usual CD rip collection, you could use + * + * mpg123_open_fixed(mh, path, MPG123_STEREO, MPG123_ENC_SIGNED_16) + * + * and be happy calling mpg123_getformat() to verify 44100 Hz rate, then just + * playing away with mpg123_read(). The occasional mono file, or MP2 file, + * will also be decoded without you really noticing. Just the speed could be + * wrong if you do not care about sample rate at all. + * \param mh handle + * \param path filesystem path + * \param channels allowed channel count, either 1 (MPG123_MONO) or + * 2 (MPG123_STEREO), or bitwise or of them, but then you're halfway back to + * calling mpg123_format() again;-) + * \param encoding a definite encoding from enum mpg123_enc_enum + * or a bitmask like for mpg123_format(), defeating the purpose somewhat + */ +MPG123_EXPORT int mpg123_open_fixed(mpg123_handle *mh, const char *path +, int channels, int encoding); /** Open and prepare to decode the specified file by filesystem path. * This does not open HTTP urls; libmpg123 contains no networking code. * If you want to decode internet streams, use mpg123_open_fd() or mpg123_open_feed(). + * \param mh handle + * \param path filesystem path + * \return MPG123_OK on success */ -EXPORT int mpg123_open(mpg123_handle *mh, const char *path); +MPG123_EXPORT int mpg123_open(mpg123_handle *mh, const char *path); /** Use an already opened file descriptor as the bitstream input * mpg123_close() will _not_ close the file descriptor. + * \param mh handle + * \param fd file descriptor + * \return MPG123_OK on success */ -EXPORT int mpg123_open_fd(mpg123_handle *mh, int fd); +MPG123_EXPORT int mpg123_open_fd(mpg123_handle *mh, int fd); /** Use an opaque handle as bitstream input. This works only with the * replaced I/O from mpg123_replace_reader_handle()! * mpg123_close() will call the cleanup callback for your handle (if you gave one). + * \param mh handle + * \param iohandle your handle + * \return MPG123_OK on success */ -EXPORT int mpg123_open_handle(mpg123_handle *mh, void *iohandle); +MPG123_EXPORT int mpg123_open_handle(mpg123_handle *mh, void *iohandle); /** Open a new bitstream and prepare for direct feeding * This works together with mpg123_decode(); you are responsible for reading and feeding the input bitstream. + * Also, you are expected to handle ICY metadata extraction yourself. This + * input method does not handle MPG123_ICY_INTERVAL. It does parse ID3 frames, though. + * \param mh handle + * \return MPG123_OK on success */ -EXPORT int mpg123_open_feed(mpg123_handle *mh); +MPG123_EXPORT int mpg123_open_feed(mpg123_handle *mh); -/** Closes the source, if libmpg123 opened it. */ -EXPORT int mpg123_close(mpg123_handle *mh); +/** Closes the source, if libmpg123 opened it. + * \param mh handle + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_close(mpg123_handle *mh); /** Read from stream and decode up to outmemsize bytes. + * + * Note: The type of outmemory changed to a void pointer in mpg123 1.26.0 + * (API version 45). + * + * \param mh handle * \param outmemory address of output buffer to write to * \param outmemsize maximum number of bytes to write * \param done address to store the number of actually decoded bytes to - * \return error/message code (watch out for MPG123_DONE and friends!) */ -EXPORT int mpg123_read(mpg123_handle *mh, unsigned char *outmemory, size_t outmemsize, size_t *done); + * \return MPG123_OK or error/message code + */ +MPG123_EXPORT int mpg123_read(mpg123_handle *mh +, void *outmemory, size_t outmemsize, size_t *done ); /** Feed data for a stream that has been opened with mpg123_open_feed(). * It's give and take: You provide the bytestream, mpg123 gives you the decoded samples. + * \param mh handle * \param in input buffer * \param size number of input bytes - * \return error/message code. */ -EXPORT int mpg123_feed(mpg123_handle *mh, const unsigned char *in, size_t size); + * \return MPG123_OK or error/message code. + */ +MPG123_EXPORT int mpg123_feed( mpg123_handle *mh +, const unsigned char *in, size_t size ); /** Decode MPEG Audio from inmemory to outmemory. * This is very close to a drop-in replacement for old mpglib. @@ -480,6 +732,11 @@ EXPORT int mpg123_feed(mpg123_handle *mh, const unsigned char *in, size_t size); * without taking decoded data. * Think of this function being the union of mpg123_read() and mpg123_feed() (which it actually is, sort of;-). * You can actually always decide if you want those specialized functions in separate steps or one call this one here. + * + * Note: The type of outmemory changed to a void pointer in mpg123 1.26.0 + * (API version 45). + * + * \param mh handle * \param inmemory input buffer * \param inmemsize number of input bytes * \param outmemory output buffer @@ -487,30 +744,67 @@ EXPORT int mpg123_feed(mpg123_handle *mh, const unsigned char *in, size_t size); * \param done address to store the number of actually decoded bytes to * \return error/message code (watch out especially for MPG123_NEED_MORE) */ -EXPORT int mpg123_decode(mpg123_handle *mh, const unsigned char *inmemory, size_t inmemsize, unsigned char *outmemory, size_t outmemsize, size_t *done); +MPG123_EXPORT int mpg123_decode( mpg123_handle *mh +, const unsigned char *inmemory, size_t inmemsize +, void *outmemory, size_t outmemsize, size_t *done ); /** Decode next MPEG frame to internal buffer * or read a frame and return after setting a new format. + * \param mh handle * \param num current frame offset gets stored there * \param audio This pointer is set to the internal buffer to read the decoded audio from. * \param bytes number of output bytes ready in the buffer + * \return MPG123_OK or error/message code */ -EXPORT int mpg123_decode_frame(mpg123_handle *mh, off_t *num, unsigned char **audio, size_t *bytes); +MPG123_EXPORT int mpg123_decode_frame( mpg123_handle *mh +, off_t *num, unsigned char **audio, size_t *bytes ); /** Decode current MPEG frame to internal buffer. * Warning: This is experimental API that might change in future releases! * Please watch mpg123 development closely when using it. + * \param mh handle * \param num last frame offset gets stored there * \param audio this pointer is set to the internal buffer to read the decoded audio from. * \param bytes number of output bytes ready in the buffer + * \return MPG123_OK or error/message code */ -EXPORT int mpg123_framebyframe_decode(mpg123_handle *mh, off_t *num, unsigned char **audio, size_t *bytes); +MPG123_EXPORT int mpg123_framebyframe_decode( mpg123_handle *mh +, off_t *num, unsigned char **audio, size_t *bytes ); /** Find, read and parse the next mp3 frame * Warning: This is experimental API that might change in future releases! * Please watch mpg123 development closely when using it. + * \param mh handle + * \return MPG123_OK or error/message code + */ +MPG123_EXPORT int mpg123_framebyframe_next(mpg123_handle *mh); + +/** Get access to the raw input data for the last parsed frame. + * This gives you a direct look (and write access) to the frame body data. + * Together with the raw header, you can reconstruct the whole raw MPEG stream without junk and meta data, or play games by actually modifying the frame body data before decoding this frame (mpg123_framebyframe_decode()). + * A more sane use would be to use this for CRC checking (see mpg123_info() and MPG123_CRC), the first two bytes of the body make up the CRC16 checksum, if present. + * You can provide NULL for a parameter pointer when you are not interested in the value. + * + * \param mh handle + * \param header the 4-byte MPEG header + * \param bodydata pointer to the frame body stored in the handle (without the header) + * \param bodybytes size of frame body in bytes (without the header) + * \return MPG123_OK if there was a yet un-decoded frame to get the + * data from, MPG123_BAD_HANDLE or MPG123_ERR otherwise (without further + * explanation, the error state of the mpg123_handle is not modified by + * this function). + */ +MPG123_EXPORT int mpg123_framedata( mpg123_handle *mh +, unsigned long *header, unsigned char **bodydata, size_t *bodybytes ); + +/** Get the input position (byte offset in stream) of the last parsed frame. + * This can be used for external seek index building, for example. + * It just returns the internally stored offset, regardless of validity -- + * you ensure that a valid frame has been parsed before! + * \param mh handle + * \return byte offset in stream */ -EXPORT int mpg123_framebyframe_next(mpg123_handle *mh); +MPG123_EXPORT off_t mpg123_framepos(mpg123_handle *mh); /*@}*/ @@ -530,65 +824,97 @@ EXPORT int mpg123_framebyframe_next(mpg123_handle *mh); * Also, really sample-accurate seeking (meaning that you get the identical sample value after seeking compared to plain decoding up to the position) is only guaranteed when you do not mess with the position code by using MPG123_UPSPEED, MPG123_DOWNSPEED or MPG123_START_FRAME. The first two mainly should cause trouble with NtoM resampling, but in any case with these options in effect, you have to keep in mind that the sample offset is not the same as counting the samples you get from decoding since mpg123 counts the skipped samples, too (or the samples played twice only once)! * Short: When you care about the sample position, don't mess with those parameters;-) * Also, seeking is not guaranteed to work for all streams (underlying stream may not support it). + * And yet another caveat: If the stream is concatenated out of differing pieces (Frankenstein stream), seeking may suffer, too. * * @{ */ /** Returns the current position in samples. - * On the next read, you'd get that sample. */ -EXPORT off_t mpg123_tell(mpg123_handle *mh); - -/** Returns the frame number that the next read will give you data from. */ -EXPORT off_t mpg123_tellframe(mpg123_handle *mh); + * On the next successful read, you'd get that sample. + * \param mh handle + * \return sample offset or MPG123_ERR (null handle) + */ +MPG123_EXPORT off_t mpg123_tell(mpg123_handle *mh); -/** Returns the current byte offset in the input stream. */ -EXPORT off_t mpg123_tell_stream(mpg123_handle *mh); +/** Returns the frame number that the next read will give you data from. + * \param mh handle + * \return frame offset or MPG123_ERR (null handle) + */ +MPG123_EXPORT off_t mpg123_tellframe(mpg123_handle *mh); -/** Seek to a desired sample offset. - * Set whence to SEEK_SET, SEEK_CUR or SEEK_END. - * \return The resulting offset >= 0 or error/message code */ -EXPORT off_t mpg123_seek(mpg123_handle *mh, off_t sampleoff, int whence); +/** Returns the current byte offset in the input stream. + * \param mh handle + * \return byte offset or MPG123_ERR (null handle) + */ +MPG123_EXPORT off_t mpg123_tell_stream(mpg123_handle *mh); + +/** Seek to a desired sample offset. + * Usage is modelled afer the standard lseek(). + * \param mh handle + * \param sampleoff offset in PCM samples + * \param whence one of SEEK_SET, SEEK_CUR or SEEK_END + * \return The resulting offset >= 0 or error/message code + */ +MPG123_EXPORT off_t mpg123_seek( mpg123_handle *mh +, off_t sampleoff, int whence ); /** Seek to a desired sample offset in data feeding mode. * This just prepares things to be right only if you ensure that the next chunk of input data will be from input_offset byte position. + * \param mh handle + * \param sampleoff offset in PCM samples + * \param whence one of SEEK_SET, SEEK_CUR or SEEK_END * \param input_offset The position it expects to be at the * next time data is fed to mpg123_decode(). * \return The resulting offset >= 0 or error/message code */ -EXPORT off_t mpg123_feedseek(mpg123_handle *mh, off_t sampleoff, int whence, off_t *input_offset); - -/** Seek to a desired MPEG frame index. - * Set whence to SEEK_SET, SEEK_CUR or SEEK_END. - * \return The resulting offset >= 0 or error/message code */ -EXPORT off_t mpg123_seek_frame(mpg123_handle *mh, off_t frameoff, int whence); +MPG123_EXPORT off_t mpg123_feedseek( mpg123_handle *mh +, off_t sampleoff, int whence, off_t *input_offset ); + +/** Seek to a desired MPEG frame offset. + * Usage is modelled afer the standard lseek(). + * \param mh handle + * \param frameoff offset in MPEG frames + * \param whence one of SEEK_SET, SEEK_CUR or SEEK_END + * \return The resulting offset >= 0 or error/message code */ +MPG123_EXPORT off_t mpg123_seek_frame( mpg123_handle *mh +, off_t frameoff, int whence ); /** Return a MPEG frame offset corresponding to an offset in seconds. * This assumes that the samples per frame do not change in the file/stream, which is a good assumption for any sane file/stream only. * \return frame offset >= 0 or error/message code */ -EXPORT off_t mpg123_timeframe(mpg123_handle *mh, double sec); +MPG123_EXPORT off_t mpg123_timeframe(mpg123_handle *mh, double sec); /** Give access to the frame index table that is managed for seeking. * You are asked not to modify the values... Use mpg123_set_index to set the * seek index + * \param mh handle * \param offsets pointer to the index array * \param step one index byte offset advances this many MPEG frames - * \param fill number of recorded index offsets; size of the array */ -EXPORT int mpg123_index(mpg123_handle *mh, off_t **offsets, off_t *step, size_t *fill); + * \param fill number of recorded index offsets; size of the array + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_index( mpg123_handle *mh +, off_t **offsets, off_t *step, size_t *fill ); /** Set the frame index table * Setting offsets to NULL and fill > 0 will allocate fill entries. Setting offsets * to NULL and fill to 0 will clear the index and free the allocated memory used by the index. + * \param mh handle * \param offsets pointer to the index array * \param step one index byte offset advances this many MPEG frames - * \param fill number of recorded index offsets; size of the array */ -EXPORT int mpg123_set_index(mpg123_handle *mh, off_t *offsets, off_t step, size_t fill); - -/** Get information about current and remaining frames/seconds. - * WARNING: This function is there because of special usage by standalone mpg123 and may be removed in the final version of libmpg123! - * You provide an offset (in frames) from now and a number of output bytes - * served by libmpg123 but not yet played. You get the projected current frame - * and seconds, as well as the remaining frames/seconds. This does _not_ care - * about skipped samples due to gapless playback. */ -EXPORT int mpg123_position( mpg123_handle *mh, off_t frame_offset, off_t buffered_bytes, off_t *current_frame, off_t *frames_left, double *current_seconds, double *seconds_left); + * \param fill number of recorded index offsets; size of the array + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_set_index( mpg123_handle *mh +, off_t *offsets, off_t step, size_t fill ); + +/** An old crutch to keep old mpg123 binaries happy. + * WARNING: This function is there only to avoid runtime linking errors with + * standalone mpg123 before version 1.23.0 (if you strangely update the + * library but not the end-user program) and actually is broken + * for various cases (p.ex. 24 bit output). Do never use. It might eventually + * be purged from the library. + */ +MPG123_EXPORT int mpg123_position( mpg123_handle *mh, off_t frame_offset, off_t buffered_bytes, off_t *current_frame, off_t *frames_left, double *current_seconds, double *seconds_left); /*@}*/ @@ -598,6 +924,7 @@ EXPORT int mpg123_position( mpg123_handle *mh, off_t frame_offset, off_t buffere * @{ */ +/** another channel enumeration, for left/right choice */ enum mpg123_channels { MPG123_LEFT=0x1 /**< The Left Channel. */ @@ -606,32 +933,55 @@ enum mpg123_channels }; /** Set the 32 Band Audio Equalizer settings. + * \param mh handle * \param channel Can be MPG123_LEFT, MPG123_RIGHT or MPG123_LEFT|MPG123_RIGHT for both. * \param band The equaliser band to change (from 0 to 31) - * \param val The (linear) adjustment factor. */ -EXPORT int mpg123_eq(mpg123_handle *mh, enum mpg123_channels channel, int band, double val); + * \param val The (linear) adjustment factor. + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_eq( mpg123_handle *mh +, enum mpg123_channels channel, int band, double val ); /** Get the 32 Band Audio Equalizer settings. + * \param mh handle * \param channel Can be MPG123_LEFT, MPG123_RIGHT or MPG123_LEFT|MPG123_RIGHT for (arithmetic mean of) both. * \param band The equaliser band to change (from 0 to 31) - * \return The (linear) adjustment factor. */ -EXPORT double mpg123_geteq(mpg123_handle *mh, enum mpg123_channels channel, int band); + * \return The (linear) adjustment factor (zero for pad parameters) */ +MPG123_EXPORT double mpg123_geteq(mpg123_handle *mh + , enum mpg123_channels channel, int band); -/** Reset the 32 Band Audio Equalizer settings to flat */ -EXPORT int mpg123_reset_eq(mpg123_handle *mh); +/** Reset the 32 Band Audio Equalizer settings to flat + * \param mh handle + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_reset_eq(mpg123_handle *mh); /** Set the absolute output volume including the RVA setting, - * vol<0 just applies (a possibly changed) RVA setting. */ -EXPORT int mpg123_volume(mpg123_handle *mh, double vol); + * vol<0 just applies (a possibly changed) RVA setting. + * \param mh handle + * \param vol volume value (linear factor) + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_volume(mpg123_handle *mh, double vol); -/** Adjust output volume including the RVA setting by chosen amount */ -EXPORT int mpg123_volume_change(mpg123_handle *mh, double change); +/** Adjust output volume including the RVA setting by chosen amount + * \param mh handle + * \param change volume value (linear factor increment) + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_volume_change(mpg123_handle *mh, double change); /** Return current volume setting, the actual value due to RVA, and the RVA * adjustment itself. It's all as double float value to abstract the sample * format. The volume values are linear factors / amplitudes (not percent) - * and the RVA value is in decibels. */ -EXPORT int mpg123_getvolume(mpg123_handle *mh, double *base, double *really, double *rva_db); + * and the RVA value is in decibels. + * \param mh handle + * \param base return address for base volume (linear factor) + * \param really return address for actual volume (linear factor) + * \param rva_db return address for RVA value (decibels) + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_getvolume(mpg123_handle *mh, double *base, double *really, double *rva_db); /* TODO: Set some preamp in addition / to replace internal RVA handling? */ @@ -684,7 +1034,7 @@ struct mpg123_frameinfo long rate; /**< The sampling rate in Hz. */ enum mpg123_mode mode; /**< The audio mode (Mono, Stereo, Joint-stero, Dual Channel). */ int mode_ext; /**< The mode extension bit flag. */ - int framesize; /**< The size of the frame (in bytes). */ + int framesize; /**< The size of the frame (in bytes, including header). */ enum mpg123_flags flags; /**< MPEG Audio flag bits. Just now I realize that it should be declared as int, not enum. It's a bitwise combination of the enum values. */ int emphasis; /**< The emphasis type. */ int bitrate; /**< Bitrate of the frame (kbps). */ @@ -692,49 +1042,130 @@ struct mpg123_frameinfo enum mpg123_vbr vbr; /**< The VBR mode. */ }; -/** Get frame information about the MPEG audio bitstream and store it in a mpg123_frameinfo structure. */ -EXPORT int mpg123_info(mpg123_handle *mh, struct mpg123_frameinfo *mi); +/** Data structure for even more detailed information out of the decoder, + * for MPEG layer III only. + * This was added to support the frame analyzer by the Lame project and + * just follows what was used there before. You know what the fields mean + * if you want use this structure. */ +struct mpg123_moreinfo +{ + double xr[2][2][576]; + double sfb[2][2][22]; /* [2][2][SBMAX_l] */ + double sfb_s[2][2][3*13]; /* [2][2][3*SBMAX_s] */ + int qss[2][2]; + int big_values[2][2]; + int sub_gain[2][2][3]; + int scalefac_scale[2][2]; + int preflag[2][2]; + int blocktype[2][2]; + int mixed[2][2]; + int mainbits[2][2]; + int sfbits[2][2]; + int scfsi[2]; + int maindata; + int padding; +}; + +/** Get frame information about the MPEG audio bitstream and store it in a mpg123_frameinfo structure. + * \param mh handle + * \param mi address of existing frameinfo structure to write to + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_info(mpg123_handle *mh, struct mpg123_frameinfo *mi); -/** Get the safe output buffer size for all cases (when you want to replace the internal buffer) */ -EXPORT size_t mpg123_safe_buffer(void); +/** Trigger collection of additional decoder information while decoding. + * \param mh handle + * \param mi pointer to data storage (NULL to disable collection) + * \return MPG123_OK if the collection was enabled/disabled as desired, MPG123_ERR + * otherwise (e.g. if the feature is disabled) + */ +MPG123_EXPORT int mpg123_set_moreinfo( mpg123_handle *mh +, struct mpg123_moreinfo *mi ); -/** Make a full parsing scan of each frame in the file. ID3 tags are found. An accurate length - * value is stored. Seek index will be filled. A seek back to current position - * is performed. At all, this function refuses work when stream is - * not seekable. - * \return MPG123_OK or MPG123_ERR. +/** Get the safe output buffer size for all cases + * (when you want to replace the internal buffer) + * \return safe buffer size + */ +MPG123_EXPORT size_t mpg123_safe_buffer(void); + +/** Make a full parsing scan of each frame in the file. ID3 tags are found. An + * accurate length value is stored. Seek index will be filled. A seek back to + * current position is performed. At all, this function refuses work when + * stream is not seekable. + * \param mh handle + * \return MPG123_OK on success */ -EXPORT int mpg123_scan(mpg123_handle *mh); +MPG123_EXPORT int mpg123_scan(mpg123_handle *mh); -/** Return, if possible, the full (expected) length of current track in samples. - * \return length >= 0 or MPG123_ERR if there is no length guess possible. */ -EXPORT off_t mpg123_length(mpg123_handle *mh); +/** Return, if possible, the full (expected) length of current track in + * MPEG frames. + * \param mh handle + * \return length >= 0 or MPG123_ERR if there is no length guess possible. + */ +MPG123_EXPORT off_t mpg123_framelength(mpg123_handle *mh); + +/** Return, if possible, the full (expected) length of current + * track in samples (PCM frames). + * + * This relies either on an Info frame at the beginning or a previous + * call to mpg123_scan() to get the real number of MPEG frames in a + * file. It will guess based on file size if neither Info frame nor + * scan data are present. In any case, there is no guarantee that the + * decoder will not give you more data, for example in case the open + * file gets appended to during decoding. + * \param mh handle + * \return length >= 0 or MPG123_ERR if there is no length guess possible. + */ +MPG123_EXPORT off_t mpg123_length(mpg123_handle *mh); /** Override the value for file size in bytes. - * Useful for getting sensible track length values in feed mode or for HTTP streams. - * \return MPG123_OK or MPG123_ERR */ -EXPORT int mpg123_set_filesize(mpg123_handle *mh, off_t size); + * Useful for getting sensible track length values in feed mode or for HTTP streams. + * \param mh handle + * \param size file size in bytes + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_set_filesize(mpg123_handle *mh, off_t size); -/** Returns the time (seconds) per frame; <0 is error. */ -EXPORT double mpg123_tpf(mpg123_handle *mh); +/** Get MPEG frame duration in seconds. + * \param mh handle + * \return frame duration in seconds, <0 on error + */ +MPG123_EXPORT double mpg123_tpf(mpg123_handle *mh); -/** Get and reset the clip count. */ -EXPORT long mpg123_clip(mpg123_handle *mh); +/** Get MPEG frame duration in samples. + * \param mh handle + * \return samples per frame for the most recently parsed frame; <0 on errors + */ +MPG123_EXPORT int mpg123_spf(mpg123_handle *mh); + +/** Get and reset the clip count. + * \param mh handle + * \return count of clipped samples + */ +MPG123_EXPORT long mpg123_clip(mpg123_handle *mh); /** The key values for state information from mpg123_getstate(). */ enum mpg123_state { - MPG123_ACCURATE = 1 /**< Query if positons are currently accurate (integer value, 0 if false, 1 if true) */ + MPG123_ACCURATE = 1 /**< Query if positons are currently accurate (integer value, 0 if false, 1 if true). */ + ,MPG123_BUFFERFILL /**< Get fill of internal (feed) input buffer as integer byte count returned as long and as double. An error is returned on integer overflow while converting to (signed) long, but the returned floating point value shold still be fine. */ + ,MPG123_FRANKENSTEIN /**< Stream consists of carelessly stitched together files. Seeking may yield unexpected results (also with MPG123_ACCURATE, it may be confused). */ + ,MPG123_FRESH_DECODER /**< Decoder structure has been updated, possibly indicating changed stream (integer value, 0 if false, 1 if true). Flag is cleared after retrieval. */ + ,MPG123_ENC_DELAY /** Encoder delay read from Info tag (layer III, -1 if unknown). */ + ,MPG123_ENC_PADDING /** Encoder padding read from Info tag (layer III, -1 if unknown). */ + ,MPG123_DEC_DELAY /** Decoder delay (for layer III only, -1 otherwise). */ }; /** Get various current decoder/stream state information. + * \param mh handle * \param key the key to identify the information to give. * \param val the address to return (long) integer values to * \param fval the address to return floating point values to - * \return MPG123_OK or MPG123_ERR for success + * \return MPG123_OK on success */ -EXPORT int mpg123_getstate(mpg123_handle *mh, enum mpg123_state key, long *val, double *fval); +MPG123_EXPORT int mpg123_getstate( mpg123_handle *mh +, enum mpg123_state key, long *val, double *fval ); /*@}*/ @@ -756,53 +1187,128 @@ typedef struct size_t fill; /**< number of used bytes (including closing zero byte) */ } mpg123_string; -/** Create and allocate memory for a new mpg123_string */ -EXPORT void mpg123_init_string(mpg123_string* sb); +/** Allocate and intialize a new string. + * \param val optional initial string value (can be NULL) + */ +MPG123_EXPORT mpg123_string* mpg123_new_string(const char* val); + +/** Free memory of contents and the string structure itself. + * \param sb string handle + */ +MPG123_EXPORT void mpg123_delete_string(mpg123_string* sb); -/** Free-up mempory for an existing mpg123_string */ -EXPORT void mpg123_free_string(mpg123_string* sb); +/** Initialize an existing mpg123_string structure to {NULL, 0, 0}. + * If you hand in a NULL pointer here, your program should crash. The other + * string functions are more forgiving, but this one here is too basic. + * \param sb string handle (address of existing structure on your side) + */ +MPG123_EXPORT void mpg123_init_string(mpg123_string* sb); + +/** Free-up memory of the contents of an mpg123_string (not the struct itself). + * This also calls mpg123_init_string() and hence is safe to be called + * repeatedly. + * \param sb string handle + */ +MPG123_EXPORT void mpg123_free_string(mpg123_string* sb); /** Change the size of a mpg123_string - * \return 0 on error, 1 on success */ -EXPORT int mpg123_resize_string(mpg123_string* sb, size_t news); + * \param sb string handle + * \param news new size in bytes + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_resize_string(mpg123_string* sb, size_t news); /** Increase size of a mpg123_string if necessary (it may stay larger). - * Note that the functions for adding and setting in current libmpg123 use this instead of mpg123_resize_string(). - * That way, you can preallocate memory and safely work afterwards with pieces. - * \return 0 on error, 1 on success */ -EXPORT int mpg123_grow_string(mpg123_string* sb, size_t news); + * Note that the functions for adding and setting in current libmpg123 + * use this instead of mpg123_resize_string(). + * That way, you can preallocate memory and safely work afterwards with + * pieces. + * \param sb string handle + * \param news new minimum size + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_grow_string(mpg123_string* sb, size_t news); /** Copy the contents of one mpg123_string string to another. - * \return 0 on error, 1 on success */ -EXPORT int mpg123_copy_string(mpg123_string* from, mpg123_string* to); + * Yes the order of arguments is reversed compated to memcpy(). + * \param from string handle + * \param to string handle + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_copy_string(mpg123_string* from, mpg123_string* to); + +/** Move the contents of one mpg123_string string to another. + * This frees any memory associated with the target and moves over the + * pointers from the source, leaving the source without content after + * that. The only possible error is that you hand in NULL pointers. + * If you handed in a valid source, its contents will be gone, even if + * there was no target to move to. If you hand in a valid target, its + * original contents will also always be gone, to be replaced with the + * source's contents if there was some. + * \param from source string handle + * \param to target string handle + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_move_string(mpg123_string* from, mpg123_string* to); /** Append a C-String to an mpg123_string - * \return 0 on error, 1 on success */ -EXPORT int mpg123_add_string(mpg123_string* sb, const char* stuff); + * \param sb string handle + * \param stuff to append + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_add_string(mpg123_string* sb, const char* stuff); /** Append a C-substring to an mpg123 string - * \return 0 on error, 1 on success + * \param sb string handle + * \param stuff content to copy * \param from offset to copy from - * \param count number of characters to copy (a null-byte is always appended) */ -EXPORT int mpg123_add_substring(mpg123_string *sb, const char *stuff, size_t from, size_t count); - -/** Set the conents of a mpg123_string to a C-string - * \return 0 on error, 1 on success */ -EXPORT int mpg123_set_string(mpg123_string* sb, const char* stuff); + * \param count number of characters to copy (a null-byte is always appended) + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_add_substring( mpg123_string *sb +, const char *stuff, size_t from, size_t count ); -/** Set the contents of a mpg123_string to a C-substring +/** Set the content of a mpg123_string to a C-string + * \param sb string handle + * \param stuff content to copy * \return 0 on error, 1 on success - * \param from offset to copy from - * \param count number of characters to copy (a null-byte is always appended) */ -EXPORT int mpg123_set_substring(mpg123_string *sb, const char *stuff, size_t from, size_t count); + */ +MPG123_EXPORT int mpg123_set_string(mpg123_string* sb, const char* stuff); -/** Count characters in a mpg123 string (non-null bytes or UTF-8 characters). - * \return character count - * \param sb the string +/** Set the content of a mpg123_string to a C-substring + * \param sb string handle + * \param stuff the future content + * \param from offset to copy from + * \param count number of characters to copy (a null-byte is always appended) + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_set_substring( mpg123_string *sb +, const char *stuff, size_t from, size_t count ); + +/** Count characters in a mpg123 string (non-null bytes or Unicode points). + * This function is of limited use, as it does just count code points + * encoded in an UTF-8 string, only loosely related to the count of visible + * characters. Get your full Unicode handling support elsewhere. + * \param sb string handle * \param utf8 a flag to tell if the string is in utf8 encoding - * Even with the fill property, the character count is not obvious as there could be multiple trailing null bytes. + * \return character count */ -EXPORT size_t mpg123_strlen(mpg123_string *sb, int utf8); +MPG123_EXPORT size_t mpg123_strlen(mpg123_string *sb, int utf8); + +/** Remove trailing \\r and \\n, if present. + * \param sb string handle + * \return 0 on error, 1 on success + */ +MPG123_EXPORT int mpg123_chomp_string(mpg123_string *sb); + +/** Determine if two strings contain the same data. + * This only returns 1 if both given handles are non-NULL and + * if they are filled with the same bytes. + * \param a first string handle + * \param b second string handle + * \return 0 for different strings, 1 for identical + */ +MPG123_EXPORT int mpg123_same_string(mpg123_string *a, mpg123_string *b); /** The mpg123 text encodings. This contains encodings we encounter in ID3 tags or ICY meta info. */ enum mpg123_text_encoding @@ -834,25 +1340,30 @@ enum mpg123_id3_enc ,mpg123_id3_enc_max = 3 /**< Placeholder to check valid range of encoding byte. */ }; -/** Convert ID3 encoding byte to mpg123 encoding index. */ -EXPORT enum mpg123_text_encoding mpg123_enc_from_id3(unsigned char id3_enc_byte); +/** Convert ID3 encoding byte to mpg123 encoding index. + * \param id3_enc_byte the ID3 encoding code + * \return the mpg123 encoding index + */ + +MPG123_EXPORT enum mpg123_text_encoding mpg123_enc_from_id3(unsigned char id3_enc_byte); /** Store text data in string, after converting to UTF-8 from indicated encoding - * \return 0 on error, 1 on success (on error, mpg123_free_string is called on sb) + * A prominent error can be that you provided an unknown encoding value, or this build of libmpg123 lacks support for certain encodings (ID3 or ICY stuff missing). + * Also, you might want to take a bit of care with preparing the data; for example, strip leading zeroes (I have seen that). * \param sb target string * \param enc mpg123 text encoding value - * \param source source buffer with plain unsigned bytes (you might need to cast from char *) + * \param source source buffer with plain unsigned bytes (you might need to cast from signed char) * \param source_size number of bytes in the source buffer - * - * A prominent error can be that you provided an unknown encoding value, or this build of libmpg123 lacks support for certain encodings (ID3 or ICY stuff missing). - * Also, you might want to take a bit of care with preparing the data; for example, strip leading zeroes (I have seen that). + * \return 0 on error, 1 on success (on error, mpg123_free_string is called on sb) */ -EXPORT int mpg123_store_utf8(mpg123_string *sb, enum mpg123_text_encoding enc, const unsigned char *source, size_t source_size); +MPG123_EXPORT int mpg123_store_utf8(mpg123_string *sb, enum mpg123_text_encoding enc, const unsigned char *source, size_t source_size); /** Sub data structure for ID3v2, for storing various text fields (including comments). * This is for ID3v2 COMM, TXXX and all the other text fields. - * Only COMM and TXXX have a description, only COMM and USLT have a language. - * You should consult the ID3v2 specification for the use of the various text fields ("frames" in ID3v2 documentation, I use "fields" here to separate from MPEG frames). */ + * Only COMM, TXXX and USLT may have a description, only COMM and USLT + * have a language. + * You should consult the ID3v2 specification for the use of the various text fields + * ("frames" in ID3v2 documentation, I use "fields" here to separate from MPEG frames). */ typedef struct { char lang[3]; /**< Three-letter language code (not terminated). */ @@ -861,6 +1372,45 @@ typedef struct mpg123_string text; /**< ... */ } mpg123_text; +/** The picture type values from ID3v2. */ +enum mpg123_id3_pic_type +{ + mpg123_id3_pic_other = 0 /**< see ID3v2 docs */ + ,mpg123_id3_pic_icon = 1 /**< see ID3v2 docs */ + ,mpg123_id3_pic_other_icon = 2 /**< see ID3v2 docs */ + ,mpg123_id3_pic_front_cover = 3 /**< see ID3v2 docs */ + ,mpg123_id3_pic_back_cover = 4 /**< see ID3v2 docs */ + ,mpg123_id3_pic_leaflet = 5 /**< see ID3v2 docs */ + ,mpg123_id3_pic_media = 6 /**< see ID3v2 docs */ + ,mpg123_id3_pic_lead = 7 /**< see ID3v2 docs */ + ,mpg123_id3_pic_artist = 8 /**< see ID3v2 docs */ + ,mpg123_id3_pic_conductor = 9 /**< see ID3v2 docs */ + ,mpg123_id3_pic_orchestra = 10 /**< see ID3v2 docs */ + ,mpg123_id3_pic_composer = 11 /**< see ID3v2 docs */ + ,mpg123_id3_pic_lyricist = 12 /**< see ID3v2 docs */ + ,mpg123_id3_pic_location = 13 /**< see ID3v2 docs */ + ,mpg123_id3_pic_recording = 14 /**< see ID3v2 docs */ + ,mpg123_id3_pic_performance = 15 /**< see ID3v2 docs */ + ,mpg123_id3_pic_video = 16 /**< see ID3v2 docs */ + ,mpg123_id3_pic_fish = 17 /**< see ID3v2 docs */ + ,mpg123_id3_pic_illustration = 18 /**< see ID3v2 docs */ + ,mpg123_id3_pic_artist_logo = 19 /**< see ID3v2 docs */ + ,mpg123_id3_pic_publisher_logo = 20 /**< see ID3v2 docs */ +}; + +/** Sub data structure for ID3v2, for storing picture data including comment. + * This is for the ID3v2 APIC field. You should consult the ID3v2 specification + * for the use of the APIC field ("frames" in ID3v2 documentation, I use "fields" + * here to separate from MPEG frames). */ +typedef struct +{ + char type; /**< mpg123_id3_pic_type value */ + mpg123_string description; /**< description string */ + mpg123_string mime_type; /**< MIME type */ + size_t size; /**< size in bytes */ + unsigned char* data; /**< pointer to the image data */ +} mpg123_picture; + /** Data structure for storing IDV3v2 tags. * This structure is not a direct binary mapping with the file contents. * The ID3v2 text frames are allowed to contain multiple strings. @@ -883,11 +1433,14 @@ typedef struct size_t texts; /**< Numer of text fields. */ mpg123_text *extra; /**< The array of extra (TXXX) fields. */ size_t extras; /**< Number of extra text (TXXX) fields. */ + mpg123_picture *picture; /**< Array of ID3v2 pictures fields (APIC). + Only populated if MPG123_PICTURE flag is set! */ + size_t pictures; /**< Number of picture (APIC) fields. */ } mpg123_id3v2; /** Data structure for ID3v1 tags (the last 128 bytes of a file). * Don't take anything for granted (like string termination)! - * Also note the change ID3v1.1 did: comment[28] = 0; comment[19] = track_number + * Also note the change ID3v1.1 did: comment[28] = 0; comment[29] = track_number * It is your task to support ID3v1 only or ID3v1.1 ...*/ typedef struct { @@ -906,23 +1459,50 @@ typedef struct #define MPG123_NEW_ICY 0x4 /**< 0100 There is ICY info that changed since last call to mpg123_icy. */ /** Query if there is (new) meta info, be it ID3 or ICY (or something new in future). - The check function returns a combination of flags. */ -EXPORT int mpg123_meta_check(mpg123_handle *mh); /* On error (no valid handle) just 0 is returned. */ + * \param mh handle + * \return combination of flags, 0 on error (same as "nothing new") + */ +MPG123_EXPORT int mpg123_meta_check(mpg123_handle *mh); + +/** Clean up meta data storage (ID3v2 and ICY), freeing memory. + * \param mh handle + */ +MPG123_EXPORT void mpg123_meta_free(mpg123_handle *mh); /** Point v1 and v2 to existing data structures wich may change on any next read/decode function call. * v1 and/or v2 can be set to NULL when there is no corresponding data. - * \return Return value is MPG123_OK or MPG123_ERR, */ -EXPORT int mpg123_id3(mpg123_handle *mh, mpg123_id3v1 **v1, mpg123_id3v2 **v2); + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_id3( mpg123_handle *mh +, mpg123_id3v1 **v1, mpg123_id3v2 **v2 ); + +/** Return pointers to and size of stored raw ID3 data if storage has + * been configured with MPG123_RAW_ID3 and stream parsing passed the + * metadata already. Null value with zero size is a possibility! + * The storage can change at any next API call. + * \param v1 address to store pointer to v1 tag + * \param v1_size size of v1 data in bytes + * \param v2 address to store pointer to v2 tag + * \param v2_size size of v2 data in bytes + * \return MPG123_OK or MPG123_ERR. Only on MPG123_OK the output + * values are set. + */ +MPG123_EXPORT int mpg123_id3_raw( mpg123_handle *mh +, unsigned char **v1, size_t *v1_size +, unsigned char **v2, size_t *v2_size ); /** Point icy_meta to existing data structure wich may change on any next read/decode function call. - * \return Return value is MPG123_OK or MPG123_ERR, */ -EXPORT int mpg123_icy(mpg123_handle *mh, char **icy_meta); /* same for ICY meta string */ + * \param mh handle + * \param icy_meta return address for ICY meta string (set to NULL if nothing there) + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_icy(mpg123_handle *mh, char **icy_meta); /** Decode from windows-1252 (the encoding ICY metainfo used) to UTF-8. * Note that this is very similar to mpg123_store_utf8(&sb, mpg123_text_icy, icy_text, strlen(icy_text+1)) . * \param icy_text The input data in ICY encoding * \return pointer to newly allocated buffer with UTF-8 data (You free() it!) */ -EXPORT char* mpg123_icy2utf8(const char* icy_text); +MPG123_EXPORT char* mpg123_icy2utf8(const char* icy_text); /* @} */ @@ -949,44 +1529,95 @@ struct mpg123_pars_struct; /** Opaque structure for the libmpg123 decoder parameters. */ typedef struct mpg123_pars_struct mpg123_pars; -/** Create a handle with preset parameters. */ -EXPORT mpg123_handle *mpg123_parnew(mpg123_pars *mp, const char* decoder, int *error); +/** Create a handle with preset parameters. + * \param mp parameter handle + * \param decoder decoder choice + * \param error error code return address + * \return mpg123 handle + */ +MPG123_EXPORT mpg123_handle *mpg123_parnew( mpg123_pars *mp +, const char* decoder, int *error ); -/** Allocate memory for and return a pointer to a new mpg123_pars */ -EXPORT mpg123_pars *mpg123_new_pars(int *error); +/** Allocate memory for and return a pointer to a new mpg123_pars + * \param error error code return address + * \return new parameter handle + */ +MPG123_EXPORT mpg123_pars *mpg123_new_pars(int *error); -/** Delete and free up memory used by a mpg123_pars data structure */ -EXPORT void mpg123_delete_pars(mpg123_pars* mp); +/** Delete and free up memory used by a mpg123_pars data structure + * \param mp parameter handle + */ +MPG123_EXPORT void mpg123_delete_pars(mpg123_pars* mp); /** Configure mpg123 parameters to accept no output format at all, - * use before specifying supported formats with mpg123_format */ -EXPORT int mpg123_fmt_none(mpg123_pars *mp); + * use before specifying supported formats with mpg123_format + * \param mp parameter handle + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_fmt_none(mpg123_pars *mp); /** Configure mpg123 parameters to accept all formats - * (also any custom rate you may set) -- this is default. */ -EXPORT int mpg123_fmt_all(mpg123_pars *mp); + * (also any custom rate you may set) -- this is default. + * \param mp parameter handle + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_fmt_all(mpg123_pars *mp); /** Set the audio format support of a mpg123_pars in detail: - \param rate The sample rate value (in Hertz). - \param channels A combination of MPG123_STEREO and MPG123_MONO. - \param encodings A combination of accepted encodings for rate and channels, p.ex MPG123_ENC_SIGNED16|MPG123_ENC_ULAW_8 (or 0 for no support). - \return 0 on success, -1 if there was an error. / + * \param mp parameter handle + * \param rate The sample rate value (in Hertz). + * \param channels A combination of MPG123_STEREO and MPG123_MONO. + * \param encodings A combination of accepted encodings for rate and channels, + * p.ex MPG123_ENC_SIGNED16|MPG123_ENC_ULAW_8 (or 0 for no + * support). + * \return MPG123_OK on success */ -EXPORT int mpg123_fmt(mpg123_pars *mh, long rate, int channels, int encodings); /* 0 is good, -1 is error */ +MPG123_EXPORT int mpg123_fmt(mpg123_pars *mp +, long rate, int channels, int encodings); -/** Check to see if a specific format at a specific rate is supported +/** Set the audio format support of a mpg123_pars in detail: + * \param mp parameter handle + * \param rate The sample rate value (in Hertz). Special value 0 means + * all rates (reason for this variant of mpg123_fmt). + * \param channels A combination of MPG123_STEREO and MPG123_MONO. + * \param encodings A combination of accepted encodings for rate and channels, + * p.ex MPG123_ENC_SIGNED16|MPG123_ENC_ULAW_8 (or 0 for no + * support). + * \return MPG123_OK on success +*/ +MPG123_EXPORT int mpg123_fmt2(mpg123_pars *mp +, long rate, int channels, int encodings); + +/** Check to see if a specific format at a specific rate is supported * by mpg123_pars. + * \param mp parameter handle + * \param rate sampling rate + * \param encoding encoding * \return 0 for no support (that includes invalid parameters), MPG123_STEREO, * MPG123_MONO or MPG123_STEREO|MPG123_MONO. */ -EXPORT int mpg123_fmt_support(mpg123_pars *mh, long rate, int encoding); +MPG123_EXPORT int mpg123_fmt_support(mpg123_pars *mp, long rate, int encoding); /** Set a specific parameter, for a specific mpg123_pars, using a parameter - * type key chosen from the mpg123_parms enumeration, to the specified value. */ -EXPORT int mpg123_par(mpg123_pars *mp, enum mpg123_parms type, long value, double fvalue); + * type key chosen from the mpg123_parms enumeration, to the specified value. + * \param mp parameter handle + * \param type parameter choice + * \param value integer value + * \param fvalue floating point value + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_par( mpg123_pars *mp +, enum mpg123_parms type, long value, double fvalue ); /** Get a specific parameter, for a specific mpg123_pars. - * See the mpg123_parms enumeration for a list of available parameters. */ -EXPORT int mpg123_getpar(mpg123_pars *mp, enum mpg123_parms type, long *val, double *fval); + * See the mpg123_parms enumeration for a list of available parameters. + * \param mp parameter handle + * \param type parameter choice + * \param value integer value return address + * \param fvalue floating point value return address + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_getpar( mpg123_pars *mp +, enum mpg123_parms type, long *value, double *fvalue); /* @} */ @@ -997,36 +1628,68 @@ EXPORT int mpg123_getpar(mpg123_pars *mp, enum mpg123_parms type, long *val, dou * @{ */ /** Replace default internal buffer with user-supplied buffer. - * Instead of working on it's own private buffer, mpg123 will directly use the one you provide for storing decoded audio. */ -EXPORT int mpg123_replace_buffer(mpg123_handle *mh, unsigned char *data, size_t size); + * Instead of working on it's own private buffer, mpg123 will directly use the one you provide for storing decoded audio. + * Note that the required buffer size could be bigger than expected from output + * encoding if libmpg123 has to convert from primary decoder output (p.ex. 32 bit + * storage for 24 bit output). + * + * Note: The type of data changed to a void pointer in mpg123 1.26.0 + * (API version 45). + * + * \param mh handle + * \param data pointer to user buffer + * \param size of buffer in bytes + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_replace_buffer(mpg123_handle *mh +, void *data, size_t size); /** The max size of one frame's decoded output with current settings. - * Use that to determine an appropriate minimum buffer size for decoding one frame. */ -EXPORT size_t mpg123_outblock(mpg123_handle *mh); + * Use that to determine an appropriate minimum buffer size for decoding one frame. + * \param mh handle + * \return maximum decoded data size in bytes + */ +MPG123_EXPORT size_t mpg123_outblock(mpg123_handle *mh); /** Replace low-level stream access functions; read and lseek as known in POSIX. * You can use this to make any fancy file opening/closing yourself, - * using mpg123_open_fd() to set the file descriptor for your read/lseek (doesn't need to be a "real" file descriptor...). + * using mpg123_open_fd() to set the file descriptor for your read/lseek + * (doesn't need to be a "real" file descriptor...). * Setting a function to NULL means that the default internal read is * used (active from next mpg123_open call on). * Note: As it would be troublesome to mess with this while having a file open, - * this implies mpg123_close(). */ -EXPORT int mpg123_replace_reader(mpg123_handle *mh, ssize_t (*r_read) (int, void *, size_t), off_t (*r_lseek)(int, off_t, int)); + * this implies mpg123_close(). + * \param mh handle + * \param r_read callback for reading (behaviour like POSIX read) + * \param r_lseek callback for seeking (like POSIX lseek) + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_replace_reader( mpg123_handle *mh +, ssize_t (*r_read) (int, void *, size_t) +, off_t (*r_lseek)(int, off_t, int) +); -/** Replace I/O functions with your own ones operating on some kind of handle instead of integer descriptors. +/** Replace I/O functions with your own ones operating on some kind of + * handle instead of integer descriptors. * The handle is a void pointer, so you can pass any data you want... * mpg123_open_handle() is the call you make to use the I/O defined here. * There is no fallback to internal read/seek here. * Note: As it would be troublesome to mess with this while having a file open, * this mpg123_close() is implied here. - * \param r_read The callback for reading (behaviour like posix read). - * \param r_lseek The callback for seeking (like posix lseek). - * \param cleanup A callback to clean up an I/O handle on mpg123_close, can be NULL for none (you take care of cleaning your handles). */ -EXPORT int mpg123_replace_reader_handle(mpg123_handle *mh, ssize_t (*r_read) (void *, void *, size_t), off_t (*r_lseek)(void *, off_t, int), void (*cleanup)(void*)); + * \param mh handle + * \param r_read callback for reading (behaviour like POSIX read) + * \param r_lseek callback for seeking (like POSIX lseek) + * \param cleanup A callback to clean up an I/O handle on mpg123_close, + * can be NULL for none (you take care of cleaning your handles). + * \return MPG123_OK on success + */ +MPG123_EXPORT int mpg123_replace_reader_handle( mpg123_handle *mh +, ssize_t (*r_read) (void *, void *, size_t) +, off_t (*r_lseek)(void *, off_t, int) +, void (*cleanup)(void*) ); /* @} */ - #ifdef __cplusplus } #endif diff --git a/mpg123.32/lib/libmpg123-0.lib b/mpg123.32/lib/libmpg123-0.lib Binary files differnew file mode 100644 index 00000000..1dddc020 --- /dev/null +++ b/mpg123.32/lib/libmpg123-0.lib diff --git a/mpg123.32/lib/libmpg123.lib b/mpg123.32/lib/libmpg123.lib Binary files differdeleted file mode 100644 index e3555655..00000000 --- a/mpg123.32/lib/libmpg123.lib +++ /dev/null |