From 56115c849efd7b6ebdd534e5ce6151438edd7934 Mon Sep 17 00:00:00 2001 From: krakenrf <78108016+krakenrf@users.noreply.github.com> Date: Wed, 12 Oct 2022 15:40:26 +1300 Subject: Updated 12. Appendix (markdown) --- 12.-Appendix.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/12.-Appendix.md b/12.-Appendix.md index 716dd87..bc54dbb 100644 --- a/12.-Appendix.md +++ b/12.-Appendix.md @@ -72,13 +72,13 @@ It is up to you the programmer to ensure that the inputs are valid. Entering inc ### Virtualization -* Virtual Box Ubuntu VM +* Virtual Box Ubuntu VM in Windows and Linux Hosts. (Be sure to use VirtualBox 7.0.0 for the best stability and USB3.0 must be enabled) * Docker with ClearLinux ## Working but with major quirks -* Odroid N2/+ - Note: You must use the BOTTOM USB port that is closest to the DC power barrel jack. All other USB ports do not work. Also requires a high quality USB cable. Also as this device does not have built in WiFi it relies on Ethernet or a USB WiFi stick. When using a USB WiFi stick there will be sample alignment glitches every now and then (we count about one USB glitch every hour). This results in the DOA/PR results going bad. If you have periodic recalibration turned ON (the default), it's not a huge deal, but you could be about 5 minutes with bad results. +* Odroid N2/+ - Note: You must use the **BOTTOM USB port that is closest to the DC power barrel jack**. All other USB ports do not work for high data rate devices on this machine. Also requires a high quality USB cable. Also as this device does not have built in WiFi it relies on Ethernet or a USB WiFi stick. When using a USB WiFi stick there will be sample alignment glitches every now and then (we count about one USB glitch every 12-24 hours). This results in the DOA/PR results going bad. If you have periodic recalibration turned ON (the default), it's not a huge deal, but you could be about 5 minutes with bad results. ## Not Working -* Tinkerboard - Unfortunately pure 32-bit CPUs are not supported by Miniforge Conda. +* Tinkerboard - Unfortunately pure 32-bit ARM CPUs are not supported by Miniforge Conda. # Frequently asked Questions (FAQ) \ No newline at end of file -- cgit v1.2.3