From 0fa449ee50b629d29c3080409b6cd399586d9851 Mon Sep 17 00:00:00 2001
From: krakenrf <78108016+krakenrf@users.noreply.github.com>
Date: Wed, 14 Sep 2022 02:41:31 +1200
Subject: Updated 07. KrakenSDR Troubleshooting (markdown)

---
 07.-KrakenSDR-Troubleshooting.md | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/07.-KrakenSDR-Troubleshooting.md b/07.-KrakenSDR-Troubleshooting.md
index 07a9009..3594dfb 100644
--- a/07.-KrakenSDR-Troubleshooting.md
+++ b/07.-KrakenSDR-Troubleshooting.md
@@ -5,13 +5,10 @@ Please note that we can only provide troubleshooting advice for our ready to use
 #### The KrakenSDR web interface only shows a header with three buttons.
 This is due to cookies being totally disabled by your browser settings. Please enable cookies as the dash backend requires them to load and save settings.
 
-#### The KrakenSDR web interface loads, but shows no activity
-This is most likely due to a poor power connection to the KrakenSDR. Ensure that you are using a quality power supply that can provide at least up to 2.4A.
-
 #### The KrakenSDR graphs are updating very slowly, or the UI is slow
 It could be that your Pi 4 overheating and throttling the CPU, or insufficiently powered and also throttling.
 
-#### Connection and sync status remain red in the Web GUI
+#### Connection and sync status remain red in the Web GUI / The KrakenSDR web interface loads, but shows no activity
 This indicates that the Kraken isn't connecting to the software correctly. 
 
 The first most likely cause of that is a poor quality or low current power supply being used with the KrakenSDR. KrakenSDR draws up to 2.2A, so a 2.4A or better 5V power supply is required. If a 1A or 2A power supply is used the unit will be unable to power up when the software requests it to start.
-- 
cgit v1.2.3