From a53bc97999ac4c9e5101abf7a6079a54b784246e Mon Sep 17 00:00:00 2001
From: Giovanni Condello <condellog@gmail.com>
Date: Mon, 8 Aug 2022 23:14:19 +0200
Subject: ODI update, Restore DPN-100 Rev A, Small update

---
 ont-ODI-DFP-34X-C2C.md | 112 +++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 104 insertions(+), 8 deletions(-)

(limited to 'ont-ODI-DFP-34X-C2C.md')

diff --git a/ont-ODI-DFP-34X-C2C.md b/ont-ODI-DFP-34X-C2C.md
index 060e59b..74730da 100644
--- a/ont-ODI-DFP-34X-C2C.md
+++ b/ont-ODI-DFP-34X-C2C.md
@@ -10,18 +10,23 @@ parent: ONT
 | ----------- | ---------------- |
 | Vendor      | ODI              |
 | Model       | DFP-34X-C2C      |
-| Alias       |                  |
 | Chipset     | Realtek RTL9601D |
 | Flash       | 8 MB             |
 | RAM         | 64 MB            |
 | System      | Linux (Luna SDK) |
 | HSGMII      | Yes              |
 | Optics      | SC/APC           |
-| IP address  |                  |
-| Web Gui     | ✅               |
-| SSH         | ✅               |
+| IP address  | 192.168.1.1      |
+| Web Gui     | ✅ admin/admin   |
+| SSH         | ✅ admin/admin   |
 | Form Factor | miniONT SFP      |
 
+**Note:** SSH uses an outdated set of algorithm/ciphers, you can connect using the following command:
+
+```shell
+ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.168.1.1
+```
+
 {% include image.html file="odi.jpg" alt="ODI DFP-34X-C2C" caption="ODI DFP-34X-C2C" %}
 
 
@@ -35,14 +40,105 @@ parent: ONT
 - [CarlitoxxPro CPGOS03-0490 v2](ont-CarlitoxxPro-CPGOS03-0490-v2)
 
 ## List of software versions
+- V1.0-220530 Modded by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation. Download link: [github.com](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip)
+- V1.0-220414
+- V1.0-220304
+
 ## List of partitions
-## List of firmwares and files
+ 
+| dev   | size     | erasesize | name            |
+| ----- | -------- | --------- | --------------- |
+| mtd0  | 00040000 | 00001000  | "boot"          |
+| mtd1  | 00002000 | 00001000  | "env"           |
+| mtd2  | 00002000 | 00001000  | "env2"          |
+| mtd3  | 0003c000 | 00001000  | "config"        |
+| mtd4  | 0014c000 | 00001000  | "k0"            |
+| mtd5  | 00274000 | 00001000  | "r0"            |
+| mtd6  | 0014c000 | 00001000  | "k1"            |
+| mtd7  | 00274000 | 00001000  | "r1"            |
+| mtd8  | 00001000 | 00001000  | "Partition_008" |
+| mtd9  | 00001000 | 00001000  | "Partition_009" |
+| mtd10 | 00001000 | 00001000  | "Partition_010" |
+| mtd11 | 00001000 | 00001000  | "Partition_011" |
+| mtd12 | 0014c000 | 00001000  | "linux"         |
+| mtd13 | 00274000 | 00001000  | "rootfs"        |
 
-# Known Bugs
+This stick supports dual boot. 
+
+`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one
+
+# Useful Commands
+
+## Getting/Setting the ONT's S/N
+```sh
+# flash get GPON_SN
+GPON_SN=TMBB00000000
+# flash set GPON_SN TMBB0A1B2C3D
+```
+
+## Getting/Setting the ONT's PLOAM password
+
+{% include alert.html content="The PLOAM password is stored in HEX format, with no 0x or separator" %}
+
+```sh
+# flash get GPON_PLOAM_PASSWD
+GPON_PLOAM_PASSWD=41414141414141414141
+# flash set GPON_PLOAM_PASSWD 41414141414141414141
+```
 
-VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII
+## Getting/Setting the ONT Vendor ID
+**Note:** this may need OMCI_OLT_MODE set to 3 to work
+```sh
+# flash get PON_VENDOR_ID  
+PON_VENDOR_ID=ZTEG
+# flash set PON_VENDOR_ID HWTC
+```
+
+## Getting/Settng the ONT Custom software version
+**Note:** this needs OMCI_OLT_MODE set to 3 and firmware 220530 modded by stich86
+
+```sh
+# nv setenv sw_custom_version0 YOURFIRSTSWVER
+# nv setenv sw_custom_version1 YOURSECONDSWVER
+```
+
+## Getting/Setting a custom HW Version
+**Note:** this probably needs OMCI_OLT_MODE set to 3
+
+```sh
+# flash get HW_HWVER
+HW_HWVER=V2.0
+# flash set HW_HWVER MYHWVERSION
+```
+
+## Getting/Setting a custom ONT Equipment ID
+**Note:** this probably needs OMCI_OLT_MODE set to 3
+```sh
+# flash get GPON_ONU_MODEL
+GPON_ONU_MODEL=DFP-34X-2C2
+# flash set GPON_ONU_MODEL DFP-34X-XXX
+```
+
+## Checking the currently active image
+```sh
+# nv getenv sw_active
+sw_active=1
+```
+
+## Booting to a different image
+```sh
+# nv setenv sw_commit 0|1
+# reboot
+```
+
+## Querying a particular OMCI ME
+```sh
+# omcicli mib get MIB_IDX
+```
+
+# Known Bugs
 
-You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE
+- Auto-sensing mode to switch between SGMII/HiSGMII
 
 # Miscellaneous Links
 
-- 
cgit v1.2.3