From b953ce12f8f4d2fed3a63c2c7ca2977b0170c86a Mon Sep 17 00:00:00 2001 From: "YuukiJapanTech (MyukiPON)" <78184495+YuukiJapanTech@users.noreply.github.com> Date: Mon, 21 Aug 2023 20:11:43 +0900 Subject: add xgsont FS XGS-ONU-25-20NI (#262) added xgsont FS XGS-ONU-25-20NI (CA8271x) add CLI command for FS XGS-ONU-25-20NI add form for generate enable password for FS XGS-ONU-25-20NI Co-authored-by: AlvaroGR Co-authored-by: Giovanni Condello Co-authored-by: Simone --- _ont_xgs/ont-fs-XGS-ONU-25-20NI.md | 540 +++++++++++++++++++++++++++++++++++++ 1 file changed, 540 insertions(+) create mode 100644 _ont_xgs/ont-fs-XGS-ONU-25-20NI.md (limited to '_ont_xgs/ont-fs-XGS-ONU-25-20NI.md') diff --git a/_ont_xgs/ont-fs-XGS-ONU-25-20NI.md b/_ont_xgs/ont-fs-XGS-ONU-25-20NI.md new file mode 100644 index 0000000..692cfa4 --- /dev/null +++ b/_ont_xgs/ont-fs-XGS-ONU-25-20NI.md @@ -0,0 +1,540 @@ +--- +title: ONT FS.com Generic Compatible XGSPON Stick ONU with MAC SFP+ (XGS-ONU-25-20NI) +has_children: true +layout: default +parent: ONT FS.com +--- + +# Hardware Specifications + +| | | +| ---------------- | -------------------------------------------------------------------------- | +| Vendor/Brand | FS | +| Model | XGS-ONU-25-20NI | +| ODM | CIG | +| ODM Product Code | XG-99S | +| Chipset | Cortina CA8271A | +| Flash | MX35LF1GE4AB 128MB | +| RAM | 128MB | +| CPU | Taroko V0.2 (MIPS) | +| CPU Clock | 500MHz | +| Bootloader | SATURN uboot | +| System | Custom Linux by Cortina (Saturn SDK) based on Kernel 4.4 Saturn-sfpplus-r1 | +| 2.5GBaseX | Yes | +| XGMII/XSGMII | Yes | +| Optics | SC/APC | +| IP address | 192.168.100.1 | +| Web Gui | | +| SSH | No | +| Telnet | ✅ | +| Serial | ✅ | +| Serial baud | 115200 | +| Serial encoding | 8-N-1 | +| Form Factor | miniONT SFP | + +{% include image.html file="XGS-ONU-25-20NI/front.jpg" alt="XGS-ONU-25-20NI front plate" caption="XGS-ONU-25-20NI front plate" %} +{% include image.html file="XGS-ONU-25-20NI/internal.jpg" alt="XGS-ONU-25-20NI internal" caption="XGS-ONU-25-20NI internal layout" %} + +## Serial + +The stick has a TTL 3.3V UART console (configured as 115200 8-N-1) that can be accessed from the SFP connector, but no components are mounted. + +The UART can be accessed by any of the following methods. +- Touch the needle to a specific point +- Shorting a specific pad to access from SFP + +### Access from PCB +The UART can be accessed by connecting a wire or touching a needle to the following points. + +{% include image.html file="XGS-ONU-25-20NI/UART_needle.png" alt="XGS-ONU-25-20NI UART Touch point" caption="XGS-ONU-25-20NI UART Touch point" %} + +### Access from SFP +By shorting these two points with solder, you can access the UART from SFP pins 2 and 7. + +| USB - TTL Adapter | SFP Connector (Molex, etc) | +| --------------------- | -------------------------- | +| Vcc (3.3V) | pin #15 , #16 | +| TX | pin #7 | +| RX | pin #2 | +| GND | pin #10 | + +{% include alert.html content="USB TTL adapter may not work due to insufficient power supply. If possible, obtain 3.3V from the power supply device instead of the USB TTL adapter." alert="Note" icon="svg-info" color="blue" %} + +{% include image.html file="XGS-ONU-25-20NI/UART_SFP.png" alt="XGS-ONU-25-20NI UART Short point" caption="XGS-ONU-25-20NI UART Short point" %} + +{% include image.html file="XGS-ONU-25-20NI/UART_bridge.png" alt="XGS-ONU-25-20NI UART solder bridge" caption="XGS-ONU-25-20NI UART solder bridge" %} + +## Firmware is interchangeable with +The firmware is compatible with the following. +- CIG XG-99S +- CIG XE-99S (10G-EPON mode) +- ECIN EN-XGSFPP-OMAC v1 + +## List of software versions +Available from `#ONT/system>ontver build` and `#ONT/system/shell>cat /etc/version`. +- R4.4.20.016 (from FS.com docs) +- R4.4.20.018 - 20230426061821 +- R4.4.20.022 - 20230612033149 + +## List of partitions + +| dev | size | erasesize | name | +| ------ | -------- | --------- | ----------------- | +| mtd0 | 00040000 | 00020000 | "ssb" | +| mtd1 | 00002000 | 00020000 | "uboot-env" | +| mtd2 | 00002000 | 00020000 | "dtb0" | +| mtd3 | 0003c000 | 00020000 | "kernel0" | +| mtd4 | 00300000 | 00020000 | "rootfs0" | +| mtd5 | 004c0000 | 00020000 | "dtb1" | +| mtd6 | 00300000 | 00020000 | "kernel1" | +| mtd7 | 004c0000 | 00020000 | "rootfs1" | +| mtd8 | 00001000 | 00020000 | "userdata" | +| mtd9 | 00001000 | 00020000 | "mfginfo1" | +| mtd10 | 00001000 | 00020000 | "mfginfo2" | +| mtd11 | 00001000 | 00020000 | "uboot-env2" | + +This ONT supports dual boot. + +`kernel0` and `rootfs0` respectively contain the kernel and firmware of the first image, `kernel1` and `rootfs1` the kernel and the firmware of the second one. + +# Useful files and binaries + +## scfg.txt +In the XGS-ONU-25-20NI ONT, the settings are loaded by four `scfg.txt` files. +For rewriting settings, `/userdata/scfg.txt` and `/tmp/scfg.txt` are used. + +- `/config/default_scfg.txt` (read only): Contains the manufacturer's default settings, which are read first at ONT startup and are the lowest priority settings. +- `/config/scfg.txt` (read only): Contains settings set by the firmware creator, which have higher priority than `default_scfg.txt` and will overwrite the settings if there is a conflict. +- `/userdata/scfg.txt` (read/write): Contains settings set by the user or ISP. It has a higher priority than `/config/scfg.txt` and will overwrite the settings if there is a conflict. Can be edited and saved. +- `/tmp/scfg.txt` (temp): It contains dynamically generated settings based on values stored on its custom ROM (mtd9, mtd10). Since they are generated on tmpfs and cannot be saved directly, they are rewritten via the `#ONT> system/misc` command on the ONT. + +The settings are overwritten and loaded at startup with the following priority: + +***(High)*** `/tmp/scfg.txt` > `/userdata/scfg.txt` > `/config/scfg.txt` > `/config/default_scfg.txt` ***(Low)*** + +## Misc Command +To configure settings using the MISC command, execute the following command: +``` +#ONT> system/misc +#ONT/system/misc> +``` + + +# Usage + +## Login and Enable + +This stick does not have a web GUI. +To configure it, you must log in via `UART` or `Telnet`. + +{% include alert.html content="FS.com Stick XGS-ONU-25-20NI does not have PON S/N on the label. (The S/N field stamped on the label is FS.com internal S/N, not PON S/N). In order to get it, you can either ask an FS.com sales representative or check the boot log from the UART!" alert="Note" icon="svg-info" color="blue" %} + +| User | Password (Enable Password) | +| ------------------------ | ----------------------------------------------------------- | +| ONU GPON Serial Number | 8 digit HMAC-MD5 based on Uppercase ONU GPON Serial Number | + +You can use the following form to generate login credentials: + +{% include cig_password_xgspon.html password_len="8" %} + +Or you can follow this external documentation on how to [emulate the ONT in QEMU](https://github.com/YuukiJapanTech/CA8271x), so use it at your own risk. + +UART does not ask for a login, it is possible to get a root shell without knowing the password. + +## Root procedure +After logging in via `telnet` or `UART`, you will first get the MiniShell with user privileges. +``` +ONT> +``` + +The root MiniShell can be obtained by executing the `enable` command on this MiniShell. +``` +ONT> enable +#ONT> +``` + +You can then switch to the Linux root shell by executing the following command: + +``` +#ONT> system/shell +#ONT/system/Shell> sh +# +``` + + +# GPON ONU status + +## Get the operational status of the ONU +Check the ONU Registration State with the following command: + +``` +#ONT> traffic/pon/show onu + +------------------------- ONU INFO -------------------------- + +Onu id 65535 +sdThreshold: 0 +sfThreshold: 0 +TO1: 80000 +TO2: 1 +eqd: 0 +Serial Number(vendor code): GPON +Serial Number(sn): abcd1234 +Password: 30 31 32 33 34 353 36 37 38 39 +Registration ID: 0x44454641554c540000000000000000000000000000000000000000000000000000000000 +------------------------- INFO END -------------------------- + +#ONT> +``` + +Check the ONU operation state with the following command: + +``` +#ONT>traffic/pon/show link + + ----------------- LINK STATE ----------------- + Operation State Machine: INIT (O1) + ----------------- STATE END ----------------- + +#ONT> +``` + +## Get information of the OLT vendor +OLT information can be extracted from the MIB with the following command: + +``` +#ONT>system/mib/show 131 +Table Oltg, Olt-g, total 1 instances + +EntityID = 0x0000 +VendorId = "" +EquipmentId = "" +Version = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +TimeOfDay = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + +#ONT> +``` + +## Querying a particular OMCI ME +You can browse the MIB with the following command: +``` +#ONT> system/mib +#ONT/system/mib> +``` + +### Show a list of MIBs supported by ONT + +``` +#ONT/system/mib> show +This command prints out the content of a mib table. +Usage: show CLASSID +CLASSID: + the class ID of the ME, defined in 983.2/984.4, currently +the following MEs are supported: +ClassID Name Desc +256 Ontg Ont-g +etc... +``` + +### Show a specific MIB +For example, to display MIB 256 (Ont-g): + +``` +#ONT/system/mib>show 256 +Table Ontg, Ont-g, total 1 instances + +EntityID = 0x0000 +VID = "GPON" +Version = 58 47 2d 39 39 53 00 00 00 00 00 00 00 00 +SerialNum = 47 50 4f 4e ab cd 12 34 +TraffMgtOpt = 2 +AtmCCOpt = 0 +BatteryBack = 1 +AdminState = 0 +OpState = 0 +OnuSurvivalTime = 0 +Loid = "" +Password = "" +AuthState = 0 +OntState = 1 + +#ONT/system/mib> +``` + +### Dump of a MIB +Output a dump of mib to `/tmp/mibdump.txt` +``` +#ONT/system/mib> dump +MIB is saved to the file /tmp/mibdump.txt. +#ONT/system/mib> +``` + +## Getting Speed LAN Mode +LAN Speed Mode can be verified from the `Status` column displayed by the following command: + +``` +#ONT>traffic/eth/show pack + +build time Apr 26 2023: 06:23:15 + +-------------------- Line Pack -- PWR 0X0 -- +Line Slot 10, NumOfPorts 1, type 49, subtype 75, state 2 +-------------------- Configuration ------------------- +port | enable | loop | Mode | RL Type | RL Us Rate| RL Ds Rate| +1 Yes No Auto 0 0 0 + +-------------------- Status ------------------- +1) link state: Up, link mode: 2.5G Full + +-------------------- Bridge Pack ------------------- +Type: 75 +State: 2 +MAC Table: 0 +MAC Aging: 0 +MTU: 0 +-------------------- Chip Data ------------------- +eth Fd: 7 +port Mask: 0x0018 +type 28 + +********** DEBUG INFO ********** + EmrLogId : 5 + EmrAdminEn : 0 + EmrbeInited : 1 + EmrDumpConn : 0 + EmrPwrShedEn : 0x0 + EmrConnItemNum : 0 + EmrUsDsReverseEn : 1 + EmrConnAllVidCheck : 0 + EmrMcastGemVlanOpEn : 1 + gEmrSaveConnItemEn : 1 + gEmrMcastCrossVlanEn : 1 + EmrUniExtractPriMatch : 1 + EMR_DRV_PACK_DUMP_ITEM_EN : 0 +******************************** +#ONT> +``` + + +# GPON/OMCI settings +XGS-ONU-25-20NI ONT uses `scfg.txt` file and misc command for configuration. + +## Getting/Setting ONU GPON Serial Number +This setting must be changed with the `misc` CLI option and the `eqsn set ""` command. +For example, if the SN is like `GPONabcd1234` (`47504f4eabcd1234`): +``` +#ONT/system/misc> eqsn set "GPONabcd1234" +``` + +The get command can also be used to retrieve the configured PON S/N. +``` +#ONT/system/misc> eqsn get +eqsn: GPONabcd1234 +``` + +## Getting/Setting ONU GPON PLOAM password +This setting must be changed with the `misc` CLI option and the `exeep_w8 ""` command. +For example, if the PLOAM password is like `0123456789`: +``` +#ONT/system/misc> exeep_w8 "0123456789" +``` + +The `exeep_r8` command can also be used to retrieve the configured PLOAM password. + +``` +#ONT/system/misc> exeep_r8 +[00, 000] 44 45 46 41 55 4c 54 00 - 00 00 00 00 00 00 00 00 | DEFAULT...... +[10, 016] 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ............. +[20, 032] 00 00 00 00 ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[30, 048] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[40, 064] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[50, 080] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[60, 096] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[70, 112] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[80, 128] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[90, 144] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[a0, 160] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[b0, 176] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[c0, 192] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[d0, 208] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[e0, 224] ff ff ff ff ff ff ff ff - ff ff ff ff ff ff ff ff | ............. +[f0, 240] ff ff ff ff ff ff ff ff - ff ff ff ff 15 91 f3 9f | ............k +``` + +## Getting/Setting ONU GPON LOID +This setting must be changed in `scfg.txt`, using the key `CHAR-ARRAY CFG_ID_LOID`. +To modify LOID username we add the following line to `/userdata/scfg.txt`: +``` +CHAR-ARRAY CFG_ID_LOID = { 0xXX,0xXX,0xXX,0xXX, 0xXX,0xXX,0xXX,0xXX, 0xXX,0xXX,0xXX,0xXX, 0xXX,0xXX,0xXX,0xXX, 0xXX,0xXX,0xXX,0xXX, 0xXX,0xXX,0xXX,0xXX }; +``` + +For example, if the LOID is like `0123456`: +``` +CHAR-ARRAY CFG_ID_LOID = { 0x30,0x31,0x32,0x33, 0x34,0x35,0x36,0x00, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00 }; +``` + +## Getting/Setting ONU GPON LOID password +This setting must be changed with the `misc` CLI option and the `pon_passwd set ` command. +For example, if the LOID password is like `0123456789`: +``` +#ONT/system/misc> pon_passwd set 0123456789 +``` + +The `get` option can also be used to retrieve the configured LOID password: +``` +#ONT/system/misc> pon_passwd get +eqsn: 01234567890000000000 +``` + +## Getting/Setting OMCI hardware version (ME 256) +This setting must be changed with the `misc` CLI option and the `eqvid set ""` command. +For example, if the hardware version is like `abc123`: +``` +#ONT/system/misc> eqvid set "abc123" +``` + +The `get` option can also be used to retrieve the configured hardware version. +``` +#ONT/system/misc> eqvid get +eqvid: abc123 +``` + +## Getting/Setting OMCI vendor ID (ME 256) +This setting must be changed with the `misc` CLI option and the `vendor set ""` command. +For example, if the vendor is like `GPON`: +``` +#ONT/system/misc> vendor set "GPON" +``` + +The `get` option can also be used to retrieve the configured PON S/N vendor field: +``` +#ONT/system/misc> vendor get +vendor: GPON +``` + +In this ONT, the MIB OntG Vendor can be set to a value different from the S/N vendor value: +``` +#ONT/system/misc> eqsn get +eqsn: GPONabcd1234 +#ONT/system/misc> vendor get +vendor: ZTEG +``` + + +# Advanced settings +See the link below for other MiniShell commands. +- [MiniShell command tree](/xgs/ont-fs-XGS-ONU-25-20NI-cli) + +## Transferring files to the stick +Stick's busybox (Linux shell) supports netcat and TFTP, which allow to send and receive files: +``` +# tar cf - localfile | nc remotehost-ip 10000 +``` + +``` +# tftp -r remotefile.bin -g remotehost-ip +``` + +## Backup of all partition +To obtain a backup, use the `dd` command to save it on `/tmp`, +or use the `cat` command to transfer it via netcat. +``` +# dd if=/dev/mtdX of=/tmp/mtdX.bin +# tftp -l /tmp/mtdX.bin -r remotehost-ip +``` + +``` +# cat /dev/mtdX | nc remotehost-ip 10000 +``` + +When partition writing to the stick, use the flash command set. +(Do not write with the `dd` command because ECC is enabled). +``` +# flash_eraseall /dev/mtdX +# flashcp -v targetfile /dev/mtdX +``` + +## Setting management IP +To change the management IP, set it with the `misc` CLI option and the `admin_ip set ` command. +For example, if the management IP is like `192.168.1.1`: +``` +#ONT/system/misc> admin_ip set 192.168.1.1 +``` + +To change the management IP netmask, set it with the `misc` CLI option and the `admin_mask set ` command. +For example, if the management IP mask is like `255.255.255.0`: +``` +#ONT/system/misc> admin_mask set 255.255.255.0 +``` + + +# Random notes + +## Bricked stick Repair +{% include alert.html content="This is an external file ([mtd dump](https://github.com/YuukiJapanTech/CA8271x)), so use it at your own risk!" alert="Note" icon="svg-info" color="blue" %} + +If the stick is bricked, it can be repaired by accessing uboot from the UART. + +If stick fails to boot, uboot will enable text input. +``` +ERROR: can't get kernel image! +SATURN# +``` + +Download stick's mtd dump from [mtd dump.](https://github.com/YuukiJapanTech/CA8271x/tree/main/mtd) + +Enable NAND with the following command: +``` +SATURN# spi_nand probe 0 +SPI_NAND ID: 0x12c200 +SPI-NAND: MX35LF1GE4AB is found. +MX35LF1GE4AB +spinand_oob_size:0x40 +spinand_page_size:0x800 +spinand_blk_size:0x20000 +spinand_size:0x8000000 +SATURN# +``` + +Receive the file with the `loadb` command. +``` +SATURN# loadb 0x80000000 +## Ready for binary (kermit) download to 0x80000000 at 115200 bps... +``` + +Using Tera Term, send the Kernel image (mtd3 or mtd6) by kermit transfer. +{% include image.html file="XGS-ONU-25-20NI/Stick_Rep.png" alt="XGS-ONU-25-20NI Repair" caption="XGS-ONU-25-20NI Repair" %} + +Erase NAND and write the transferred kernel. +``` +SATURN# spi_nand erase 0x000000600000 0x600000 +SATURN# spi_nand erase 0x000003500000 0x600000 +SATURN# spi_nand write 0x80000000 0x000000600000 0x600000 +SATURN# spi_nand write 0x80000000 0x000003500000 0x600000 +``` + +Receive the file with the `loadb` command. +and Using Tera Term, send the rootfs image (mtd4 or mtd7) by kermit transfer. +``` +SATURN# loadb 0x81000000 +## Ready for binary (kermit) download to 0x81000000 at 115200 bps... +``` + +Erase NAND and write the transferred rootfs. +``` +SATURN# spi_nand erase 0x000000c00000 0x2800000 +SATURN# spi_nand erase 0x000003b00000 0x2800000 +SATURN# spi_nand write 0x81000000 0x000000c00000 0x2800000 +SATURN# spi_nand write 0x81000000 0x000003b00000 0x2800000 +``` + +When the stick is turned back on, it will boot with the transferred kernel and rootfs. + + +# Known Bugs +- There is a bug in the `register_id` command in the `misc` CLI option that changes the value of `pon_passwd` (LOID Password) instead of `register_id` (PLOAM). + + +# Miscellaneous Links +- [GitHub - CA8271x](https://github.com/YuukiJapanTech/CA8271x) + -- cgit v1.2.3