From 3e8a641cde40b0e3b4a2ad354bff5921f54de640 Mon Sep 17 00:00:00 2001 From: Florian Strankowski Date: Sat, 15 Jun 2024 09:05:10 +0200 Subject: Adding network ethernet port speed configuration (#349) --- _ont/ont-sercomm-fg1000b-11.md | 7 +++++++ 1 file changed, 7 insertions(+) (limited to '_ont/ont-sercomm-fg1000b-11.md') diff --git a/_ont/ont-sercomm-fg1000b-11.md b/_ont/ont-sercomm-fg1000b-11.md index c69ff69..b5db0fb 100644 --- a/_ont/ont-sercomm-fg1000b-11.md +++ b/_ont/ont-sercomm-fg1000b-11.md @@ -176,6 +176,13 @@ or ## Getting/Setting Speed LAN Mode +This has been tested on the Telekom Germany Model of the FG1000B.11 and has brought the desired success of increasing +the pre-configured ethernet port speed (1G) to auto-negotiated 2.5G. This does not survive a reboot though. + +``` +/bin/ethctl eth0 media-type auto +``` + # GPON/OMCI settings Part of GPON config is done via the misc configuration loaded as first lib by the smd binary, the config can be seen here: -- cgit v1.2.3