From 514dbdc78921731a92ac31f113f64f871f546b55 Mon Sep 17 00:00:00 2001 From: Giammarco Date: Sat, 27 May 2023 21:55:31 +0200 Subject: Update ont-odi-realtek-dfp-34x-2c2.md (#203) * Update ont-odi-realtek-dfp-34x-2c2.md * Update ont-luna-sdk-useful-commands.md - Add OLT_MODE 21 for ODI Sticks into OLT Mode table * Apply suggestions from code review * fix * fix --------- Co-authored-by: Simone <26844016+simonebortolin@users.noreply.github.com> Co-authored-by: Simone Bortolin --- _ont/ont-odi-realtek-dfp-34x-2c2.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to '_ont/ont-odi-realtek-dfp-34x-2c2.md') diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md index 0739447..5bafd9e 100644 --- a/_ont/ont-odi-realtek-dfp-34x-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md @@ -35,9 +35,9 @@ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.16 ## List of software versions -- V1.0-220923 (hybrid by @lanseyujie and @stick86) +- V1.0-220923 (hybrid by @lanseyujie and @stich86) - V1.0-220817 -- V1.0-220530 (hybrid by @stick86) +- V1.0-220530 (hybrid by @stich86) - V1.0-220414 (vlan working) - V1.0-220304 - V1.0-210702 @@ -79,7 +79,7 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} -{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86' speedLan='1234567 or `OMCI_OLT_MODE` value to be set to 21 and generate a sigsegv of `/bin/checkomci` that allows the SW to be modified' %} +{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`" speedLan='1234567' omciOLT21='true' %} # Known Bugs -- cgit v1.2.3