From 72c13df9f2ba5d503c14e264a0d7d0c6fd494f50 Mon Sep 17 00:00:00 2001 From: Simone <26844016+simonebortolin@users.noreply.github.com> Date: Sat, 9 Sep 2023 11:01:19 +0200 Subject: update OMCI_OLT_MODE and LAN_SDS_MODE for realtek (#272) Co-authored-by: Simone Bortolin --- _ont/ont-leox-lxt-010s-h.md | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to '_ont/ont-leox-lxt-010s-h.md') diff --git a/_ont/ont-leox-lxt-010s-h.md b/_ont/ont-leox-lxt-010s-h.md index 533939d..fffbf10 100644 --- a/_ont/ont-leox-lxt-010s-h.md +++ b/_ont/ont-leox-lxt-010s-h.md @@ -68,7 +68,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a - V3.3.4L4rc1 (Fix 2.5GbE HiSGMII) - V3.3.4L4rc5 -{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %} +{% include_relative ont-luna-sdk-useful-commands.md + ploam='ascii' + speedLan='18' + customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' + flash='/etc/scripts/flash' + customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.' + omciOLT21='true' %} # Known Bugs -- cgit v1.2.3