From 9ad801896d1e2dd47eceb73e6a7b503ec97cc543 Mon Sep 17 00:00:00 2001
From: Simone <26844016+simonebortolin@users.noreply.github.com>
Date: Sat, 10 Feb 2024 09:38:18 +0000
Subject: add whitelist

---
 _router_pon/avm_fritzbox.md       | 11 +++++++
 _router_pon/free_iliad_box_pop.md | 67 ++++-----------------------------------
 2 files changed, 17 insertions(+), 61 deletions(-)

diff --git a/_router_pon/avm_fritzbox.md b/_router_pon/avm_fritzbox.md
index 9547d2b..261f02b 100644
--- a/_router_pon/avm_fritzbox.md
+++ b/_router_pon/avm_fritzbox.md
@@ -1,3 +1,11 @@
+## SFP Whitelist
+
+- FRITZ!SFP AON (IEEE 802.3ah-2004 1000BASE-BX10, TX 1310 nm, RX 1480 to 1580 nm, LC/APC 8°, 10 km)[^aon]
+- FRITZ!SFP AON TV Filter (IEEE 802.3ah-2004 1000BASE-BX10)
+- FRITZ!SFP GPON (GPON ITU-T G.984.2/984.5, TX 1310 nm, RX 1490 nm, LC/UPC 8°, 20 km)
+- FRITZ!SFP XGS-PON (XGS-PON ITU-T G.9807 TX 1270 nm, RX 1577 nm, è l’unico che usa un SC/UPC, 20 km)
+
+
 # GPON/OMCI settings
 
 ## Setting ONU GPON Serial Number
@@ -12,3 +20,6 @@ It is possible to change the serial numebr by editing it in the http://fritz.box
 It is possible to change the GPON PLOAM passowrd by editing it in the logon data, in the ASCII format (PLOAM)
 
 {% include image.html file="avm/avm_ploam.jpg"  alt="PLOAM Password form" caption="PLOAM Password form" %}
+
+--
+[^aon] [EWE AON Anschluss SFP Transceiver](https://www.glasfaserforum.de/forum/thread/984-ewe-aon-anschluss-sfp-transceiver/)
diff --git a/_router_pon/free_iliad_box_pop.md b/_router_pon/free_iliad_box_pop.md
index 9ac6e2b..72133e0 100644
--- a/_router_pon/free_iliad_box_pop.md
+++ b/_router_pon/free_iliad_box_pop.md
@@ -41,67 +41,12 @@ parent: Free/Iliad
 The serial port is routed through the USB-C port used for power (which is PD compliant, tested with a notebook power supply). The pins are SBU1 and SBU2, reversal is handled using an open drain buffer (SN74LVC2G07) so a pull-up resistor on RX is needed. On the power daughter board TP7 is TX and TP8 is RX. There is also a USB differential pair routed through the USB-C connector but there is no use for it yet.
 At the moment nothing more than a boot log is available. [^bcm61650hack] [^freeboxhack]
 
-## Firmware is interchangeable with
-
-## List of software versions
-
-## List of partitions
-
-# Userful files and binaries
-
-## Useful files
-
-## Useful binaries
-
-# GPON ONU status
-
-## Get the operational status of the ONU
-
-## Get information of the OLT vendor
-
-## Querying a particular OMCI ME
-
-## Getting/Setting Speed LAN Mode
-
-# GPON/OMCI settings
-
-## Getting/Setting ONU GPON Serial Number
-
-## Getting/Setting ONU GPON PLOAM password
-
-## Getting/Setting ONU GPON LOID and LOID password
-
-## Getting/Setting OMCI software version (ME 7)
-
-## Getting/Setting OMCI hardware version (ME 256)
-
-## Getting/Setting OMCI vendor ID (ME 256)
-
-## Getting/Setting OMCI equipment ID (ME 257)
-
-# Advanced settings
-
-## Setting management MAC
-
-## Setting management IP
-
-## Rebooting the ONU
-
-## Creating a new rootfs
-
-## Flashing a new rootfs
-
-# SFP EEPROM settings
-
-## Reading all EEPROM
-
-# EEPROM (I2C slave simulated EEPROM)
-
-## EEPROM0 layout
-
-## EEPROM1 layout
-
-# Known Bugs
+## SFP Whitelist
+- WTD RTXM166-401-C13 (EPON w/o MAC)
+- WTD RTXM166-401-C11 (EPON w/o MAC)
+- Hisense LTF7215-BH+ (EPON w/o MAC)
+- [Technicolor AFM0003](/ont-technicolor-afm0003) (GPON with MAC)
+- SFP Copper 10Gtek  (1 and 10 Gbps)
 
 # Miscellaneous Links
 
-- 
cgit v1.2.3