| Commit message (Collapse) | Author | Age | Files | Lines | |
|---|---|---|---|---|---|
| * | FS mod: Hot fix loid password (#162) | Ernesto Castellotti | 2023-03-19 | 1 | -1/+1 |
| | | |||||
| * | Add FS modded firmware (#161) | Ernesto Castellotti | 2023-03-19 | 3 | -1/+201 |
| | | | | | | | | | | | | | | | | | | | | | | * Add FS modded firmware * Fix * Add redirect * red warning * warning version 5 * add older version, for history! * fix * fix * fix * fix | ||||
| * | Update ont-zte-f6005.md (#158) | Simone | 2023-03-13 | 1 | -3/+6 |
| | | | | | | | | * Update ont-zte-f6005.md * Update ont-zte-f6005.md * Update ont-zte-f6005.md | ||||
| * | FS: Removed useless Vendor ID for setting hardware version (#154) | Ernesto Castellotti | 2023-02-21 | 1 | -2/+2 |
| | | | | The Vendor ID is in any case replaced with the one present in the EEPROM and possibly set with sfp_i2c -i7 -s "YOUR_VENDOR_ID", so it's totally useless to specify in the MIB file and causes unnecessary confusion | ||||
| * | fix fw_setenv sfp_a2_info (#152) | Simone | 2023-02-21 | 1 | -1/+1 |
| | | |||||
| * | Update SC connector type on LEOX and AFM (#153) | Giammarco Marzano | 2023-02-21 | 3 | -7/+7 |
| | | | | | | | | | | | | | | | | | * Update ont-leox-lxt-010h-d.md * Update ont-technicolor-afm0002.md Add SC connector type (SC-APC) * Update ont-technicolor-afm0003.md Add SC connector type (SC-APC) Fix typo on RAM and FLASH * Update ont-technicolor-afm0002.md Fix typo on RAM and Flash | ||||
| * | Remove Carlito command from FS.com (#151) | Simone | 2023-02-13 | 1 | -13/+3 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | hotfix root v2 (#150) | Simone | 2023-02-12 | 1 | -2/+1 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Some Fix on Huawei, FS, Broadcom (#146) | Simone | 2023-02-10 | 7 | -242/+397 |
| | | | | | | | | * Getting/Setting Speed LAN Mode * RX Loss / TX Fault confusion * change order and heading of section * fix eeprom values and subunit * various alignment and table fixes | ||||
| * | Nokia G-010G-A alignment (#141) | Simone | 2023-02-10 | 1 | -16/+32 |
| | | | | | | * nokia g-010s-a alignment Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> | ||||
| * | New Lantiq tool for reading and writing the EEPROM (#147) | Simone | 2023-02-10 | 1 | -86/+17 |
| | | | | | | * use vue * update tool for edit the EEPROM for rooted * new tool for read the EEPROM for all lantiq | ||||
| * | FS: Always use the original file (immutable /rom squashfs) to set the ONU hardware version (#148) | Ernesto Castellotti | 2023-02-10 | 1 | -2/+6 |
| | | |||||
| * | Update ont-nokia-g-010g-a.md (#129) | driz | 2023-01-31 | 1 | -1/+1 |
| | | | | * Update ont-nokia-g-010g-a.md | ||||
| * | fix typo on nokia (#137) | Simone | 2023-01-31 | 6 | -5/+5 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Update ont-leox-lxt-010h-d.md (#139) | Giammarco Marzano | 2023-01-30 | 1 | -1/+42 |
| | | | | * Update ont-leox-lxt-010h-d.md | ||||
| * | Disable RX_LOS (#138) | Ernesto Castellotti | 2023-01-22 | 1 | -0/+39 |
| | | |||||
| * | Update realtek luna SDK command page and migrate LEOX ONT to luna SDK command page, add command for CarlitoxxPro (#134) | Simone | 2023-01-21 | 14 | -231/+282 |
| | | | | | | | | | | | | | | | | | | | | | | * migrate some command to luna sdk and add new command to afm0003 * fix * update * final fix on rtk * fix * fix * fix * restore nokia for move to other pr * last fix on tc Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Fix ploam FS (#133) | Simone | 2023-01-21 | 1 | -1/+7 |
| | | | | | | | | | | * fix ploam FS * Update ont-fs-com-gpon-onu-stick-with-mac.md * add ploamsg Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | update huawei hg (#135) | Simone | 2023-01-21 | 1 | -20/+19 |
| | | |||||
| * | Fix cig (#136) | Simone | 2023-01-21 | 1 | -2/+2 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | hotfix of merge remnants (#132) | Simone | 2023-01-21 | 1 | -1/+1 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | fix HiSense (#128) | Simone | 2023-01-19 | 6 | -10/+10 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | hotfix toggle (#130) | Simone | 2023-01-18 | 3 | -3/+3 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Minor fix on alternative root V3 procedure (flash) (#118) | Simone | 2023-01-18 | 3 | -195/+10 |
| | | | | * Minor fix on alternative root V3 procedure (flash) | ||||
| * | General refactor of Hardware Specifications, Serial and heading - Lantiq (#115) | Simone | 2023-01-18 | 7 | -129/+143 |
| | | | | | | | | | | | | | | * General refactor of Hardware Specifications, Serial and heading - Lantiq * Fix ODM * fix odm * fix self odm * Apply suggestions from code review Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> | ||||
| * | Update ont-odi-zte-dfp-34g-2c2.md (#127) | Giammarco Marzano | 2023-01-17 | 1 | -17/+38 |
| | | | | | | | | * Update ont-odi-zte-dfp-34g-2c2.md * Update ont-odi-zte-dfp-34g-2c2.md fix typos | ||||
| * | General refactor of Hardware Specifications, Serial and heading - Other (#117) | Simone | 2023-01-17 | 4 | -74/+67 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | General refactor of Hardware Specifications, Serial and heading - Realtek (#113) | Simone | 2023-01-17 | 11 | -206/+207 |
| | | | | | | | | | | | | | | * General refactor of Hardware Specifications, Serial and heading - Realtek * Minor fix * fix odm - genexis * fix self odm * fix afm0003 Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Hotfix self-odm (#121) | Simone | 2023-01-17 | 7 | -32/+29 |
| | | | | | | | | * hotfix self-odm * fix zte Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | General refactor of Hardware Specifications, Serial and heading - Nokia & CIG (#114) | Simone | 2023-01-17 | 13 | -221/+260 |
| | | | | | | | | | | * General refactor of Hardware Specifications, Serial and heading - Nokia, Cig * Fix ODM * fix odm Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | General refactor of Hardware Specifications, Serial and heading - Huawei (#112) | Simone | 2023-01-17 | 6 | -81/+81 |
| | | | | | | | | | | | | * General refactor of Hardware Specifications, Serial and heading - Huawei * trim new line * Fix HiSilicon * fix odm Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Hotfix ODM manufacter & LEOX parent page (#120) | Simone | 2023-01-17 | 7 | -9/+9 |
| | | | | | | | | * fix odm manufacter * hotfix Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | General refactor of Hardware Specifications, Serial and heading - Leox (#111) | Simone | 2023-01-17 | 5 | -145/+109 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | General refactor of Hardware Specifications, Serial and heading - ZTE, ZIZA, Zyxel (#116) | Simone | 2023-01-17 | 6 | -131/+148 |
| | | | | | | | | * General refactor of Hardware Specifications, Serial and heading - Ziza, Zyxel, ZTE * Fix ODM Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Fix odi ZTE pages (#108) | Simone | 2023-01-16 | 2 | -35/+44 |
| | | |||||
| * | Add serial-ymodem flash web-app (#77) (#96) | Simone | 2023-01-16 | 1 | -0/+206 |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add gui form ymodem * Remove LineBreakTransformer and add async * Add function to start ymodem in uboot * Add XYMini implementation * Remove delay from startYmodemLoad * update gui * Fix broken script code * Split waitUbootStop * Add changeBaudrate * Fix changeBaudrate * Add sendImageMtd * Add waitEndImageLoad * Add flashImageMtd * Implement flash firmware * fix js code Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> | ||||
| * | Create a unique page for Luna SDK 1.9 based ONT and add odi rtk DFP 34G (#107) | Simone | 2023-01-16 | 5 | -121/+196 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Update ont-leox-lxt-010h-d.md (#109) | Simone | 2023-01-16 | 1 | -6/+6 |
| | | | | Co-authored-by: marcinkuczera <107181766+marcinkuczera@users.noreply.github.com> | ||||
| * | Update ont-technicolor-afm0002.md (#106) | Giammarco Marzano | 2023-01-14 | 1 | -2/+3 |
| | | | | | - add sw_version1 set after flashing new firmware - removed "=" from the commit | ||||
| * | Update ont-technicolor-afm0003.md (#102) | Simone | 2023-01-14 | 1 | -1/+1 |
| | | |||||
| * | Migrated all pages to HSGMII Yes (replace ✅) (#104) | Simone | 2023-01-14 | 2 | -2/+2 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Update zyxel SFP and add Router EX5601-T0 (#103) | Simone | 2023-01-14 | 3 | -6/+24 |
| | | | | | | | | | | * update zyxel SFP and Router * fi ziza pic * add set speed Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | FS Stick: Add emergency bootloader unlock web procedure (#101) | Ernesto Castellotti | 2023-01-12 | 1 | -1/+24 |
| | | |||||
| * | Allow specify model name in root_lantiq include | Ernesto Castellotti | 2023-01-12 | 1 | -1/+1 |
| | | |||||
| * | Moved root procedure to root_lantiq.html to be able to use in other pages | Ernesto Castellotti | 2023-01-12 | 1 | -148/+1 |
| | | | | | Now step 2 can also be removed to use the same process on other non-Huawei SFPs | ||||
| * | Add sfpModel parameter and remove successCallback | Ernesto Castellotti | 2023-01-12 | 1 | -8/+12 |
| | | |||||
| * | Rename utils.js to serialUtil.js | Ernesto Castellotti | 2023-01-12 | 1 | -1/+1 |
| | | |||||
| * | Moved serial port management to utils.js | Ernesto Castellotti | 2023-01-12 | 1 | -50/+25 |
| | | |||||
| * | Moved all root process to rootLantiq.js | Ernesto Castellotti | 2023-01-12 | 1 | -38/+8 |
| | | |||||
| * | Moved useful functions to assets/js/rootLantiq.js | Ernesto Castellotti | 2023-01-12 | 1 | -65/+1 |
| | | |||||
| * | FS Stick: Removed EEPROM reset/reload | Ernesto Castellotti | 2023-01-11 | 1 | -14/+0 |
| | | | | These commands can be needed basically only for experiments, a user shouldn't use them and can cause big problems in case of cross firmware on Huawei MA5671A | ||||
| * | Apply suggestions from code review | Edoardo Fullin | 2023-01-10 | 1 | -3/+3 |
| | | | | Co-authored-by: Simone <26844016+simonebortolin@users.noreply.github.com> | ||||
| * | MA5671A: Fixed RX Loss / TX Fault confusion | Edoardo Fullin | 2023-01-10 | 1 | -5/+10 |
| | | |||||
| * | Horfix on huawei ma5671 (#94) | Simone | 2023-01-06 | 1 | -1/+2 |
| | | |||||
| * | Apply suggestions from code review | Simone | 2023-01-05 | 1 | -15/+4 |
| | | | | Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> | ||||
| * | fix typo | Simone | 2023-01-05 | 1 | -2/+2 |
| | | |||||
| * | add serial procedure to flash | Simone | 2023-01-05 | 1 | -1/+37 |
| | | |||||
| * | Update ont-huawei-ma5671a.md (#92) | Simone | 2023-01-05 | 1 | -1/+1 |
| | | |||||
| * | fix f6005 bug (#87) | Simone | 2023-01-02 | 1 | -1/+1 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | fix escape pt2 (#88) | Simone | 2023-01-02 | 2 | -4/+4 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | update link for pcap and wireshark (#85) | Simone | 2023-01-02 | 2 | -4/+5 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Update info on "GPON Resource" (chipset, info on GPON [Auth, MIB, VEIP, PPTP, GEM, ...], EPON, ...) (#80) | Simone | 2023-01-02 | 2 | -16/+17 |
| | | | | | | | | | | | | | | | | | * update chipset manufacter * Moved GPON info from quick-start to G.984 series, add new info to G.984 series, EPON and NG-PON, added sources where missing * minor fix * Update _gpon/vendor.md Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> * Update _gpon/gpon-auth.md Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> | ||||
| * | Update ont-genexis-ft-g2110c.md (#82) | Giammarco Marzano | 2023-01-02 | 1 | -2/+5 |
| | | | | Add new firmware version C-5.7.1-EFT1 and relative links for the modified firmware | ||||
| * | Add photo of ZTE F601v9 and add some infos to all ont's (#46) (#79) | Simone | 2023-01-02 | 36 | -499/+640 |
| | | | | | | | | | | | | * Add photo of ZTE F601v9 and add some infos to all ont's (#46) * minor fixs * Update _config.yml * Some fix to standarize Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Add zyxel pmg3000 eeprom (#76) | Ernesto Castellotti | 2022-12-30 | 1 | -0/+119 |
| | | | | * Add zyxel pmg3000 eeprom | ||||
| * | Streamlining of customisations: migration of numerous functionalities to the JTD fork and add new functionalities implemented by JTD fork (#75) | Simone | 2022-12-30 | 1 | -4/+4 |
| | | | | | | | | | | | | | | | | * use form validation by jdt * migrate theme-switch to new version of jtd * Use new feature of jdt * streamlining of customisations: migrate, aux button, modal and theme switch to fork JTD * fix * fix Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Add FS EEPROM info (#71) | Ernesto Castellotti | 2022-12-27 | 1 | -1/+133 |
| | | |||||
| * | Hot fix: eeprom dbm value (#70) | Ernesto Castellotti | 2022-12-27 | 1 | -2/+2 |
| | | |||||
| * | add use heading (#68) | Simone | 2022-12-26 | 1 | -0/+2 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | General improvements to ONT pages and add new ONTs (#63) | Simone | 2022-12-26 | 53 | -431/+745 |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add CIG G-97CP and Hisense LTE3415 * update ont * Apply suggestions from code review Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> * add form for cig-password add pattern matching for huawei rooted * update text * move nokia setting pages to separate markdown files as they are all the same fix regex * fix chipset * some general update * update ont * update RTL9601CI * update nokia-cig * add adtran and SourcePhotonics SPS-34-24T-HP-TDFM * add nokia g-010g-a and fix table on adtran * Update ont-t-w-twcgpon657.md * some fix on T&W TWC GPON657 * Apply suggestions from code review Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> * Update _ont/ont-nokia-use.md Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> * fix enable password on zte f6005 * fix factory reset * some fix on nokia * fix on zte f6005 Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> | ||||
| * | hotfix Nokia G-010S-A (#67) | Simone | 2022-12-26 | 1 | -1/+1 |
| | | | | Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Fix Nokia G-010S-P and Nokia G-010S-A MTD changing layout (#62) | Simone | 2022-12-26 | 2 | -2/+2 |
| | | | | | | | | | | | * swap model to fix * Apply suggestions from code review Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> Co-authored-by: Giovanni Condello <nanomad@users.noreply.github.com> | ||||
| * | Add eeprom info to huawei ma5671 (#66) | Ernesto Castellotti | 2022-12-26 | 1 | -0/+132 |
| | | |||||
| * | Add long version of V3R017C10S201 (V300R017C10SPC201B255) for Huawei hg8010h (#65) | Simone | 2022-12-24 | 1 | -1/+1 |
| | | |||||
| * | WIP: Update ont-genexis-ft-g2110c.md (#55) | Giammarco Marzano | 2022-12-19 | 4 | -5/+116 |
| | | | | | | | | | | | | | Add FT-G2110C-2.5G modding information like: - change S/N - change IP address - change PLOAM password - list currenlty known bugs or restriction - Add modded firmware to spoof firmware version, based on latest versione (C-5.7.1-DEV3) - Add other useful commands like: unlock env, change GponSn (without TTL), change HWVer, change EqptID | ||||
| * | Add web root script and Restore V1 Procedure (#32) | Simone Bortolin | 2022-12-19 | 2 | -22/+475 |
| | | | | | | | | | | | * Add web root script (V3) ** Web serial, LineBreakTransformer, minimal UI ** Step 2 in fallback to avoid kernel panic ** Some new alert * Restore V1 Procedure * Minor update on V1 and V2 procedure (see #43) Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> | ||||
| * | Replace the preboot uboot variable to unlock the stick with the correct one from the manufacturer (#43) | Ernesto Castellotti | 2022-12-19 | 2 | -2/+2 |
| | | | | * Replace the preboot uboot variable to unlock the stick with the correct one from the manufacturer | ||||
| * | Update ont-huawei-ma5671a-root.md (#56) | Simone Bortolin | 2022-12-19 | 1 | -1/+1 |
| | | | | Fix double `in in` | ||||
| * | Grammar review of the whole wiki (#54) | Andrea Greco | 2022-12-19 | 17 | -113/+115 |
| | | |||||
| * | Nokia G-010G-T General info (#49) | Giammarco Marzano | 2022-12-19 | 1 | -11/+163 |
| | | | | | | | | | | | | | | | | | | | | | | | | | * Add info on how to change values on G-010G-P * Nokia G-010G-T images * Update ont-nokia-g-010g-t.md add photos and mod info * Add files via upload * Update ont-nokia-g-010g-t.md fix parsing, link and missing image extension * Update ont-nokia-g-010g-t.md * Update _ont/ont-nokia-g-010g-t.md * Update ont-nokia-g-010g-t.md Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> Co-authored-by: Simone <info@simonebortolin.it> | ||||
| * | Genexis FiberTwist-G2110C-2.5G General info (#50) | Giammarco Marzano | 2022-12-19 | 2 | -0/+76 |
| | | | | | | | | | | | | | | * Add FT-G2110C Images * Add Genexis FT-G2110C-2.5G ONT Wiki about FiberTwist G2110C-2.5G ONT * Add fibertwist optical header photos Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Added infos, clarified some details about omcid patching (#52) | gionag | 2022-12-19 | 1 | -6/+25 |
| | | | | | | | | | | | | | * Update ont-fs-com-gpon-onu-stick-with-mac.md Added checksum for paching omcid, clarification on the procedure * Update ont-fs-com-gpon-onu-stick-with-mac.md * Update _ont/ont-fs-com-gpon-onu-stick-with-mac.md Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com> | ||||
| * | Update ont-huawei-ma5671a.md (#51) | Simone Bortolin | 2022-12-19 | 1 | -0/+51 |
| | | | | | - Restore backup of all partition (removed in cf2ddd45af85a886a41a052b255cc9329486d939 #29, but not restored in #30) - Add cloning mtd1 to mtd5 procedure | ||||
| * | Add info on how to change values on G-010G-P (#48) | Giovanni Condello | 2022-12-19 | 1 | -2/+95 |
| | | | | | | * Add info on how to change values on G-010G-P * Integrate feedback | ||||
| * | Add info on China, SF, Rooted firmware for huawei MA5671a (#47) | Simone Bortolin | 2022-12-19 | 5 | -9/+217 |
| | | | | | | | | | | | | * add info on huawei ma * add missing point 2 of huawei root and replace tik with $() * fix counter reset * Update _ont/ont-huawei-ma5671a-rooted.md Co-authored-by: Ernesto Castellotti <mail@ernestocastellotti.it> | ||||
| * | Update LEOX lxt-010s-h wiki (#44) | Giammarco Marzano | 2022-12-19 | 1 | -6/+69 |
| | | | | | | | | | | | - add info about connector type - add info about UART connection and image - add flash and ram size - add web ui confirmation - add partition layout - add current known firmware revision - add current known issues - add commands to change IP and LAN_SDS_MODE | ||||
| * | Enable data_1g_8q_us1280_ds512 and custom mib to FS stick (#42) | Ernesto Castellotti | 2022-12-19 | 1 | -0/+17 |
| | | | | | | | | | | * Enable data_1g_8q_us1280_ds512 and custom mib to FS stick * Fix double space * Use fw_setenv insted of sed * Add ini and fix title | ||||
| * | Fix FS stick examples (#41) | Ernesto Castellotti | 2022-12-19 | 1 | -5/+5 |
| | | | | | | | | * Fix FS stick examples * Fix sed command * Fix image1 name | ||||
| * | Add guide to change onu version and image software version for FS stick (#40) | Ernesto Castellotti | 2022-12-19 | 1 | -2/+43 |
| | | |||||
| * | Add initial info for XZ000-G3 (#39) | Ernesto Castellotti | 2022-12-19 | 1 | -0/+35 |
| | | | | | | * Add initial info for XZ000-G3 * Add more info | ||||
| * | Add link to zte-config-utiltiy (#34) | Giovanni Condello | 2022-12-19 | 1 | -0/+3 |
| | | |||||
| * | Update ont-huawei-ma5671a.md | Giovanni Condello | 2022-12-19 | 1 | -1/+1 |
| | | |||||
| * | Update ont-huawei-ma5671a.md | Giovanni Condello | 2022-12-19 | 1 | -1/+2 |
| | | |||||
| * | Warn about RX loss (#33) | Niccolò Belli | 2022-12-19 | 1 | -0/+2 |
| | | |||||
| * | Add flashing procedure for MA5671A (#30) | Giovanni Condello | 2022-12-19 | 2 | -8/+47 |
| | | | | | | * Add flashing procedure for MA5671A * Re-introduce dying gasp doc * Update UART pinout | ||||
| * | Update root procedure for MA5671A (#29) | Niccolò Belli | 2022-12-19 | 1 | -50/+15 |
| | | | | | | | | | | | | | | | | | | | | | | * Remove wrong step which writes an mtd2 (a kernel) into a non-existing image0 * Fix steps order * Add notes about deprecated OpenSSH protocols and algorithms * Use absolute paths * Use same number * Fix ssh info * Drop steps 10 to 13 * Prefer pin 14 for GND because some huawei dont have GND attached to pin 10 * Restore ssh step * Add gdn and tx/rx warning | ||||
| * | typo fix ont-nokia-g-010s | tomonetml | 2022-12-19 | 1 | -2/+2 |
| | | |||||
| * | add new info to tc afm0003 | Simone Bortolin | 2022-12-19 | 2 | -3/+3 |
| | | |||||
| * | add and fix some ont | Simone Bortolin | 2022-12-19 | 7 | -8/+210 |
| | | |||||
| * | add parent page for Technicolor | Simone Bortolin | 2022-12-19 | 2 | -0/+2 |
| | | |||||
| * | update | Simone Bortolin | 2022-12-19 | 11 | -35/+85 |
| | | |||||
| * | Update ont-huawei-ma5671a-root.md | Simone Bortolin | 2022-12-19 | 1 | -6/+6 |
| | | |||||
| * | Update ont-leox.md | Simone Bortolin | 2022-12-19 | 1 | -27/+2 |
| | | |||||
| * | add some new onts | Simone Bortolin | 2022-12-19 | 7 | -2/+201 |
| | | |||||
| * | fix root procedure | Simone Bortolin | 2022-12-19 | 1 | -19/+19 |
| | | |||||
| * | Add some info for uboot | Ernesto Castellotti | 2022-12-19 | 1 | -0/+2 |
| | | |||||
| * | add new root procedure | Simone Bortolin | 2022-12-19 | 1 | -62/+112 |
| | | |||||
| * | Update ont-technicolor-afm0002.md | Danno88-88 | 2022-12-19 | 1 | -0/+1 |
| | | |||||
| * | Update ont-huawei-ma5671a.md | Simone Bortolin | 2022-12-19 | 1 | -0/+2 |
| | | |||||
| * | Update ont-technicolor-afm0002.md | Simone Bortolin | 2022-12-19 | 1 | -0/+1 |
| | | |||||
| * | Update ont-odi-realtek-dfp-34x-2c2.md | Simone Bortolin | 2022-12-19 | 1 | -1/+1 |
| | | |||||
| * | update navbar | Simone Bortolin | 2022-12-19 | 25 | -2/+53 |
| | | |||||
| * | Fix AFM scripts path | Giovanni Condello | 2022-12-19 | 1 | -6/+6 |
| | | |||||
| * | Update ont-huawei-ma5671a.md | Simone Bortolin | 2022-12-19 | 1 | -2/+1 |
| | | |||||
| * | some update on serial and files | Simone Bortolin | 2022-12-19 | 8 | -48/+62 |
| | | |||||
| * | Add RTK ODI TTL Connection | Giovanni Condello | 2022-12-19 | 1 | -0/+15 |
| | | |||||
| * | Fix command to enable serial in/output in Lantiq boot | Ernesto Castellotti | 2022-12-19 | 2 | -2/+2 |
| | | |||||
| * | Remove Fw_setenv bug in pmg3000 | Andrea Canale | 2022-12-19 | 1 | -1/+1 |
| | | |||||
| * | fix inline code | Andrea055 | 2022-12-19 | 1 | -2/+2 |
| | | |||||
| * | fix typo | Andrea055 | 2022-12-19 | 1 | -2/+2 |
| | | |||||
| * | update zyxel pmg3000-d20b | Andrea055 | 2022-12-19 | 1 | -0/+14 |
| | | |||||
| * | Fix bootloader unlock | Ernesto Castellotti | 2022-12-19 | 1 | -1/+1 |
| | | |||||
| * | Add bootloader unlock for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+8 |
| | | |||||
| * | Fix 6BA1896SPLQA42 MTD2 link | Ernesto Castellotti | 2022-12-19 | 1 | -1/+1 |
| | | |||||
| * | Update ont-huawei-ma5671a.md | Simone Bortolin | 2022-12-19 | 1 | -0/+1 |
| | | |||||
| * | Update ont-huawei-ma5671a.md | Simone Bortolin | 2022-12-19 | 1 | -0/+1 |
| | | |||||
| * | fix urls | Simone Bortolin | 2022-12-19 | 15 | -25/+16 |
| | | |||||
| * | Update ont-zyxel-pmg3000-d20b.md | Luca | 2022-12-19 | 1 | -7/+12 |
| | | | | | | | - added/fixed web gui credentials - fixed some urls - fixed ploam password commands - added 'Reset Web Gui admin credentials' section | ||||
| * | update infos | Simone Bortolin | 2022-12-19 | 2 | -0/+11 |
| | | |||||
| * | Merge branch 'main' of github.com:hack-gpon/hack-gpon.github.io | Simone Bortolin | 2022-12-19 | 6 | -20/+97 |
| |\ | |||||
| | * | Add cpu info for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+2 |
| | | | |||||
| | * | Fix type error | Ernesto Castellotti | 2022-12-19 | 1 | -1/+1 |
| | | | |||||
| | * | Add EEPROM reset for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -1/+8 |
| | | | |||||
| | * | Update ont-huawei-hg8010h.md | Simone Bortolin | 2022-12-19 | 1 | -0/+1 |
| | | | |||||
| | * | Fix interchangeable firmware links for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -2/+1 |
| | | | |||||
| | * | Fix interchangeable firmware links for Nokia G-010S-P | Ernesto Castellotti | 2022-12-19 | 1 | -4/+3 |
| | | | |||||
| | * | Fix links to ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 5 | -6/+6 |
| | | | |||||
| | * | Fix link to Huawei MA5671A root | Ernesto Castellotti | 2022-12-19 | 1 | -1/+1 |
| | | | |||||
| | * | Add images for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+3 |
| | | | |||||
| | * | Add system and bootloader info for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -2/+3 |
| | | | |||||
| | * | Update ont-fs-com-gpon-onu-stick-with-mac.md | Simone Bortolin | 2022-12-19 | 1 | -2/+3 |
| | | | |||||
| | * | Make clear the difference of partitions when the committed image changes for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+12 |
| | | | |||||
| | * | Fix typing error | Ernesto Castellotti | 2022-12-19 | 1 | -1/+1 |
| | | | |||||
| | * | Add firmware files for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+4 |
| | | | |||||
| | * | Add partitions for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+10 |
| | | | |||||
| | * | Add currently known software version for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -0/+14 |
| | | | |||||
| | * | Add commands to ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -1/+25 |
| | | | |||||
| | * | Update ont-huawei-hg8010h.md | Simone Bortolin | 2022-12-19 | 1 | -4/+4 |
| | | | |||||
| * | | some update and fix | Simone Bortolin | 2022-12-19 | 4 | -45/+56 |
| |/ | |||||
| * | fix | Simone Bortolin | 2022-12-19 | 1 | -4/+4 |
| | | |||||
| * | Fix wrong password for ONT FS.com GPON ONU Stick with MAC | Ernesto Castellotti | 2022-12-19 | 1 | -1/+1 |
| | | |||||
| * | Update ont-nokia-g-010g-q.md | Simone Bortolin | 2022-12-19 | 1 | -0/+2 |
| | | |||||
| * | some update and fix | Simone Bortolin | 2022-12-19 | 10 | -41/+42 |
| | | |||||
| * | add some iusse at zyxel | Simone Bortolin | 2022-12-19 | 1 | -0/+2 |
| | | |||||
| * | some update | Simone Bortolin | 2022-12-19 | 8 | -29/+156 |
| | | |||||
| * | add pon vendor and fix note on zyxel | Simone Bortolin | 2022-12-19 | 1 | -6/+6 |
| | | |||||
| * | fix image link | Simone Bortolin | 2022-12-19 | 1 | -8/+8 |
| | | |||||
| * | add {:style="counter-reset:none"} for fix breaking in root huawei procedure | Simone Bortolin | 2022-12-19 | 1 | -0/+9 |
| | | |||||
| * | fix images, migrated to collection | Simone Bortolin | 2022-12-19 | 28 | -0/+1966 |
 |
index : anonymous/hack-gpon.github.io | |
| Unnamed repository; edit this file 'description' to name the repository. | mirror |
| summaryrefslogtreecommitdiffstats |