summaryrefslogtreecommitdiffstats
path: root/ont-Nokia-g-010g-q.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--ont-Nokia-g-010g-q.md4
1 files changed, 2 insertions, 2 deletions
diff --git a/ont-Nokia-g-010g-q.md b/ont-Nokia-g-010g-q.md
index 6289952..e816061 100644
--- a/ont-Nokia-g-010g-q.md
+++ b/ont-Nokia-g-010g-q.md
@@ -12,7 +12,7 @@ parent: ONT
| Model | G-010G-Q |
| Alias | |
| Chipset | Realtek RTL9601B |
-| Flash | Winbond <a href="https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf">W25Q128JV</a> 3V 128M-BIT SPI |
+| Flash | Winbond [W25Q128JV](https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf) 3V 128M-BIT SPI |
| RAM | DDR2 325MHz |
| System | Linux (Luna SDK) |
| HSGMII | No |
@@ -47,7 +47,7 @@ You can easily communicate with the ONT using a TTL converter (for example the C
*You don't actually need the two VCC pins, just use TX/RX and GND*
-{% include warning.html content="The ONT's serial logic is 3V3." %}
+{% include alert.html content="The ONT's serial logic is 3V3." alert="Warning" icon="svg-warning" color="red" %}
Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure the CH341A had a 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below.