summaryrefslogtreecommitdiffstats
path: root/_ont_xgs/ont-hisense-ltf7267-bha+.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont_xgs/ont-hisense-ltf7267-bha+.md46
1 files changed, 24 insertions, 22 deletions
diff --git a/_ont_xgs/ont-hisense-ltf7267-bha+.md b/_ont_xgs/ont-hisense-ltf7267-bha+.md
index deafbec..de444e4 100644
--- a/_ont_xgs/ont-hisense-ltf7267-bha+.md
+++ b/_ont_xgs/ont-hisense-ltf7267-bha+.md
@@ -7,33 +7,37 @@ parent: Hisense
# Hardware Specifications
-| | |
-| ----------- | ------------ |
-| Vendor | Hisense |
-| Model | LTF7267-BHA+ |
-| Chipset | Cortina |
-| Manufacter | Hisense |
-| Flash | 128MB |
-| RAM | 128MB |
-| System | Custom Linux by Cortina (Saturn SDK) based on Kernel 4.4 |
-| XSGMII | Yes |
-| Optics | SC/APC |
-| IP address | 192.168.0.1 |
-| Web Gui | ✅ user `admin`, password `system` |
-| Telnet | ✅ user `root`, password `hbmtsfp` |
-| SSH | ✅ user `root`, password `hbmtsfp` |
-| Form Factor | miniONT SFP+ |
+| | |
+| ---------------- | -------------------------------------------------------- |
+| Vendor/Brand | Hisense |
+| Model | LTF7267-BHA+ |
+| ODM | ✅ |
+| Chipset | Cortina |
+| Flash | 128MB |
+| RAM | 128MB |
+| System | Custom Linux by Cortina (Saturn SDK) based on Kernel 4.4 |
+| XSGMII | Yes |
+| Optics | SC/APC |
+| IP address | 192.168.0.1 |
+| Web Gui | ✅ user `admin`, password `system` |
+| SSH | ✅ user `root`, password `hbmtsfp` |
+| Telnet | ✅ user `root`, password `hbmtsfp` |
+| Serial | ✅ |
+| Serial baud | 115200 |
+| Serial encoding | 8-N-1 |
+| Form Factor | miniONT SFP+ |
# External/Internal Photo
{% include image.html file="ont-hisense-ltf7267-bha+_front.jpg" alt="Hisense LTF7267-BHA+ External" caption="Hisense LTF7267-BHA+ External" %}
-{% include image.html file="ont-hisense-ltf7267-bha+_inside.jpg" alt="Hisense LTF7267-BHA+ Internals" caption="Hisense LTF7267-BHA+ Internals" %}
+## Serial
+The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. It's near the SFP header. TX, RX and ground pads need to be connected to a USB2TTL adapter supporting a logic level of 3.3V.
-## UART Console (115200, 8bit)
+{% include image.html file="ont-hisense-ltf7267-bha+_inside.jpg" alt="Hisense LTF7267-BHA+ Internals" caption="Hisense LTF7267-BHA+ Internals" %}
-It's near the SFP header (look at the red-square on _Internals Pic_). TX, RX and ground pads need to be connected to a USB2TTL adapter supporting a logic level of 3.3V
+{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
## List of software versions
- 22.05.26.1 - 20220527052622 (from /etc/hi_version - /etc/version)
@@ -59,7 +63,7 @@ This ONT supports dual boot.
`kernel0` and `rootfs0` respectively contain the kernel and firmware of the first image, `kernel1` and `rootfs1` the kernel and the firmware of the second one
-# Useful Commands
+# General Settings and Useful Commands
To access Cortina Shell (needed to check OMCI stuff and XGSPON status) you can use the following command:
@@ -391,5 +395,3 @@ Reboot ONT to apply the change
- `ALCL` OLT mode uses some static configurations on MIBs, so if your OLT has strict configuration checks it might not work properly
- During initial tests the only currently working mode of the stick is `PPTP EthUni`
- Stick can be configured also emulate `VEIP` mode(adding it to the scfg.txt file), but current firmware doesn't link correctly the XGBE interface, so no traffic is passing between LAN and PON interfaces
-
-# Miscellaneous Links