diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-odi-realtek-dfp-34x-2c2.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md index 579d734..86b1620 100644 --- a/_ont/ont-odi-realtek-dfp-34x-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md @@ -45,7 +45,7 @@ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.16 ## List of firmwares and files - [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/DFP-34X-2C2) -The reccomended version are `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hybrid_220916.tar` because it has working VLAN translation. +The recommended versions are `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hybrid_220916.tar`, as these have working VLAN translation. ## List of partitions @@ -68,11 +68,11 @@ The reccomended version are `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hy This stick supports dual boot. -`k0` and `r0` respectively contain the kernel and firmware of the first image, while `k1` and `r1` respectively contain the kernel and the firmware of the second one +`k0` and `r0` respectively contain kernel and firmware of the first image, while `k1` and `r1` contain kernel and firmware of the second one. ## Serial -The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. It's near the SFP header. TX, RX and ground pads need to be connected to a USB2TTL adapter supporting a logic level of 3.3V. +The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface: it's near the SFP header. TX, RX and ground pads need to be connected to a USB2TTL adapter supporting 3V3 logic. {% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl.jpg" alt="DFP-34X-2C2 TTL Connection" caption="DFP-34X-2C2 TTL Connection" %} {% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg" alt="DFP-34X-2C2 TTL Pin" caption="DFP-34X-2C2 TTL Pin" %} @@ -82,7 +82,7 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' - customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`." + customSwVersionAlert="This needs either `OMCI_OLT_MODE` to be set to 3 and firmware version 220530 or 220923 as modded by @stich86 or, if you don't want to replace the installed firmware, set `OMCI_OLT_MODE` value to `21`. This will force the stick to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`." speedLan='1234567' omciOLT21='true' %} |