summaryrefslogtreecommitdiffstats
path: root/_ont/ont-nokia-g-010s-a.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont/ont-nokia-g-010s-a.md32
1 files changed, 16 insertions, 16 deletions
diff --git a/_ont/ont-nokia-g-010s-a.md b/_ont/ont-nokia-g-010s-a.md
index 13920d7..bc31a84 100644
--- a/_ont/ont-nokia-g-010s-a.md
+++ b/_ont/ont-nokia-g-010s-a.md
@@ -35,7 +35,7 @@ parent: Nokia
## Modifying firmware
-The Nokia G-010S-A can be flashed with the [Nokia G-010S-P](/ont-nokia-g-010s-p) firmware, provided the MTD layout has been changed beforehand to match the new one. For the full procedure, see the post on [lafibre.info](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg870551/#msg870551)
+The Nokia G-010S-A can be flashed with the [Nokia G-010S-P](/ont-nokia-g-010s-p) firmware, provided the MTD layout has been changed beforehand to match the new one. For the full procedure, see this post on [lafibre.info](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg870551/#msg870551)
## List of software versions
@@ -87,7 +87,7 @@ See more info on: [Firmwares G-010S-A](https://github.com/hwti/G-010S-A#firmware
# Usage
-## Enable serial
+## Enabling serial
```sh
fw_setenv bootdelay 5
@@ -97,13 +97,13 @@ fw_setenv preboot
# GPON ONU status
-## Get the operational status of the ONU
+## Getting the operational status of the ONU
```sh
onu ploamsg
```
-## Get information of the OLT vendor
+## Getting information on the OLT vendor
```sh
omci_pipe.sh meg 131 0
@@ -114,7 +114,7 @@ omci_pipe.sh meg 131 0
```sh
omci_pipe.sh meg MIB_IDX ME_IN
```
-Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number
+Where `MIB_IDX` is the MIB ID and `ME_IN` is the ME instance number
## Getting/Setting Speed LAN Mode
@@ -123,13 +123,13 @@ Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number
| 4 | 1 Gbps / SGMII |
| 5 | 2.5 Gbps / HSGMII with auto-neg on |
-To enable the 2.5 Gbps / HSGMII with auto-neg on:
+To enable the interface to sync at 2.5 Gbps speeds / using HSGMII with auto-neg on:
```sh
fw_setenv sgmii_mode 5
```
-To remove the value (back to default):
+To revert the change back to default:
```sh
fw_setenv sgmii_mode
```
@@ -143,8 +143,8 @@ The `link_status` variable tells the current speed
# GPON/OMCI settings
-## Enable parameters modification
-This setting must be inserted in order to performs the others parameters modification
+## Enabling parameter modification
+This setting must be set in order to perform other parameter modifications
```sh
ritool set OperatorID 0000
```
@@ -168,11 +168,11 @@ To check the current password (the password field contains decimal values of ASC
onu gtccg
```
-The value can be changed using the web interface.
+This value can be changed using the web interface.
## Getting/Setting OMCI software version (ME 7)
-Software verion must be changed by directly modifing firmware by using the patches which can be found in GitHub page of [Nokia G-010-A](https://github.com/hwti/G-010S-A) and adding a folder `0001_swversion` that contins a file `patch.sh`:
+The software version must be changed by directly modifying firmware by using the patches found in the wiki's page about the [Nokia G-010-A](https://github.com/hwti/G-010S-A) ONT and then adding a folder `0001_swversion` that contins a file `patch.sh` with the following content:
```
#!/bin/sh
@@ -183,7 +183,7 @@ ROOTFS=$1
echo "Changing to software version desidered"
sed -i s/3FE46398BGCB22/3FE45655BOCK99/g "$ROOTFS/usr/etc/buildinfo"
```
-Where `3FE46398BGCB22` is the current software version and `3FE45655BOCK99` the software version desidered
+Where `3FE46398BGCB22` is the current software version and `3FE45655BOCK99` the desired software version
## Getting/Setting OMCI hardware version (ME 256)
@@ -194,7 +194,7 @@ ritool set ICS 01
## Getting/Setting OMCI equipment ID (ME 257)
-This ONT is designed to save nokia equipment ID, specifically to put the equipment ID of a Nokia G-010G-Q we need:
+This ONT is designed to save Nokia's equipment ID, specifically to set the equipment ID of a Nokia G-010G-Q the following commands are to be used:
```sh
ritool set CleiCode __________
@@ -214,12 +214,12 @@ Where `CleiCode` is the prefix and `Mnemonic` the postfix.
## Backup of all partition
-Make a backup of all partitions, an easy way is:
+Make a backup of all partitions, an easy way is to run these commands:
- On the stick run:
```sh
cat /proc/mtd
```
-- For each mtdX run in the lantiq shell:
+- For each mtdX run this command in the lantiq shell:
```sh
cp /dev/mtdX /tmp
```
@@ -255,7 +255,7 @@ ifconfig eth0:1 192.168.1.10 netmask 255.255.255.0
{% include alert.html content="It is recommended to enable serial access via TTL" alert="Info" icon="svg-info" color="blue" %}
-The following commands are used to flash a new rootfs to image1 and then boot to it
+The following commands are used to flash a new rootfs to image1 and then boot to it:
```sh
mtd write /tmp/rootfs.bin image1
update_env_flag 1