diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-luna-sdk-useful-commands.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md index e48cda5..724add3 100644 --- a/_ont/ont-luna-sdk-useful-commands.md +++ b/_ont/ont-luna-sdk-useful-commands.md @@ -17,7 +17,7 @@ # GPON ONU status -## Get the operational status of the ONU +## Getting the operational status of the ONU ```sh diag gpon get onu-state @@ -69,7 +69,7 @@ GPON_SN=TMBB00000000 ## Getting/Setting ONU GPON PLOAM password {% if include.ploam == 'asciiAndHex' %} -{% include alert.html content="The ploam can be saved in either ASCII or HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} +{% include alert.html content="The PLOAM password can be saved in either ASCII or HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} ```sh # {{ include.flash }} get GPON_PLOAM_PASSWD @@ -180,13 +180,13 @@ OMCI_OLT_MODE=1 | Value | Note | OMCI Information | | ----- | --------------- | ------------------------------------------------------------------------------------------------------ | -| 0 | Default Mode | Stock, some value are cannot be change | +| 0 | Default Mode | Stock setting, some values cannot be changed | | 1 | Huawei OLT Mode | Huawei MA5671a | | 2 | ZTE OLT Mode | ZTE | | 3 | Customized Mode | Custom Software/Hardware Version, OMCC, etc... |{% if include.omciOLT21 %} | 21 | Owerflow Mode | Custom Software/Hardware Version, OMCC, etc... (this is a hack and causes sigsegv of `/bin/checkomci`) |{% endif %} -Some Fiber Vendor/Wholesale/ISP have explicit LAN Port Number provisioning or proprietary OMCI that ONT Stick cant not understand, this will make ONT Stick reply OK whatever OMCI OLT throw at. +Some vendors/wholesale providers/ISPs have explicit LAN Port Number provisioning or proprietary OMCI that the stick cannot understand, this will make the stick reply OK to whatever the OLT sends it via OMCI. `0` = Disable, `1` = Enable, Default is 0 |