summaryrefslogtreecommitdiffstats
path: root/_ont/ont-luna-sdk-useful-commands.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont/ont-luna-sdk-useful-commands.md146
1 files changed, 77 insertions, 69 deletions
diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md
index 535d62a..a1d5269 100644
--- a/_ont/ont-luna-sdk-useful-commands.md
+++ b/_ont/ont-luna-sdk-useful-commands.md
@@ -1,4 +1,4 @@
-# General Settings and Useful Commands
+# Userful files and binaries
## Useful files
- `/var/config/lastgood.xml` - Contains the user portion of the configuration
@@ -15,15 +15,58 @@
- `omci_app` - The OMCI daemon
- `diag` - Used to run low-level diagnostics commands on the stick
+# GPON ONU status
+
+## Get the operational status of the ONU
+
+```sh
+diag gpon get onu-state
+```
+
+## Querying a particular OMCI ME
+```sh
+# omcicli mib get MIB_IDX
+```
+
+
+{% if include.speedLan %}
+
+## Getting/Setting Speed LAN Mode
+{% assign customSpeedLanAlert = include.customSpeedLanAlert | default: "Before editing the speed make sure your hardware supports it." %}
+{% include alert.html content=customSpeedLanAlert alert="Note" icon="svg-info" color="blue" %}
+
+To change the link mode use this command:
-## Getting/Setting the ONT's S/N
+```sh
+# {{ include.flash }} get LAN_SDS_MODE
+LAN_SDS_MODE=0
+# {{ include.flash }} set LAN_SDS_MODE 1
+```
+
+| Value | `cat /proc/kmsg` | Mode | Behavior |
+| ----- | ------------------------------------ | -------- | --------------------------- |{% if include.speedLan contains '0' %}
+| 0 | `<4>change mode to 0(GE/FE PHY)` | `TP` | 1GbaseT/100baseT |{% endif %}{% if include.speedLan contains '1' %}
+| 1 | `<4>change mode to 1(Fiber 1G)` | `FIBER` | 1GbaseX with auto-neg on |{% endif %}{% if include.speedLan contains '2' %}
+| 2 | `<4>change mode to 2(SGMII PHY)` | `TP MII` | 1Gb PHY |{% endif %}{% if include.speedLan contains '3' %}
+| 3 | `<4>change mode to 3(SGMII MAC)` | `MII` | 1Gb MAC |{% endif %}{% if include.speedLan contains '4' %}
+| 4 | `<4>change mode to 4(HiSGMII PHY)` | `TP MII` | 2.5Gb PHY |{% endif %}{% if include.speedLan contains '5' %}
+| 5 | `<4>change mode to 5(HiSGMII MAC)` | `MII` | 2.5Gb MAC |{% endif %}{% if include.speedLan contains '6' %}
+| 6 | `<4>change mode to 6(2500BaseX)` | `FIBER` | 2500baseX with auto-neg on |{% endif %}{% if include.speedLan contains '7' %}
+| 7 | `<4>change mode to 7(SGMII Force)` | `TP` | 1GbaseT with auto-neg off |{% endif %}{% if include.speedLan contains '8' %}
+| 8 | `<4>change mode to 8(HISGMII Force)` | `TP` | 2500baseT with auto-neg off |{% endif %}
+
+{% endif %}
+
+# GPON/OMCI settings
+
+## Getting/Setting ONU GPON Serial Number
```sh
# {{ include.flash }} get GPON_SN
GPON_SN=TMBB00000000
# {{ include.flash }} set GPON_SN TMBB0A1B2C3D
```
-## Getting/Setting the ONT's PLOAM password
+## Getting/Setting ONU GPON PLOAM password
{% if include.ploam == 'asciiAndHex' %}
{% include alert.html content="The ploam can be saved in either ASCII or HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %}
@@ -55,33 +98,8 @@ GPON_PLOAM_PASSWD=AAAAAAAAAA
```
{% endif %}
-## Checking the currently active image
-```sh
-# nv getenv sw_active
-sw_active=1
-# nv getenv sw_version0
-sw_version0=V1_7_8_210412
-# nv getenv sw_version1
-sw_version1=V1_7_8_210412
-```
-
-## Booting to a different image
-```sh
-# nv setenv sw_commit 0|1
-# reboot
-```
-
-## Getting/Setting the ONT Vendor ID
+## Getting/Setting OMCI software version (ME 7)
-{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
-
-```sh
-# flash get PON_VENDOR_ID
-PON_VENDOR_ID=ZTEG
-# flash set PON_VENDOR_ID HWTC
-```
-
-## Getting/Settng the ONT Custom software version
{% assign customSwVersionAlert = include.customSwVersionAlert | default: "This needs the OMCI_OLT_MODE value to be set to 3" %}
{% include alert.html content=customSwVersionAlert alert="Note" icon="svg-info" color="blue" %}
@@ -90,7 +108,7 @@ PON_VENDOR_ID=ZTEG
# nv setenv sw_custom_version1 YOURSECONDSWVER
```
-## Getting/Setting a custom HW Version
+## Getting/Setting OMCI hardware version (ME 256)
{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
```sh
@@ -99,7 +117,17 @@ HW_HWVER=V2.0
# {{ include.flash }} set HW_HWVER MYHWVERSION
```
-## Getting/Setting a custom ONT Equipment ID
+## Getting/Setting OMCI vendor ID (ME 256)
+
+{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
+
+```sh
+# flash get PON_VENDOR_ID
+PON_VENDOR_ID=ZTEG
+# flash set PON_VENDOR_ID HWTC
+```
+
+## Getting/Setting OMCI equipment ID (ME 257)
{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
```sh
@@ -134,35 +162,10 @@ Some Fiber Vendor/Wholesale/ISP have explicit LAN Port Number provisioning or pr
OMCI_FAKE_OK=0
# {{ include.flash }} set OMCI_FAKE_OK 1
```
-{% if include.speedLan %}
-
-## Getting/Setting Speed LAN Mode
-{% assign customSpeedLanAlert = include.customSpeedLanAlert | default: "Before editing the speed make sure your hardware supports it." %}
-{% include alert.html content=customSpeedLanAlert alert="Note" icon="svg-info" color="blue" %}
-
-To change the link mode use this command:
-
-```sh
-# {{ include.flash }} get LAN_SDS_MODE
-LAN_SDS_MODE=0
-# {{ include.flash }} set LAN_SDS_MODE 1
-```
-
-| Value | `cat /proc/kmsg` | Mode | Behavior |
-| ----- | ------------------------------------ | -------- | --------------------------- |{% if include.speedLan contains '0' %}
-| 0 | `<4>change mode to 0(GE/FE PHY)` | `TP` | 1GbaseT/100baseT |{% endif %}{% if include.speedLan contains '1' %}
-| 1 | `<4>change mode to 1(Fiber 1G)` | `FIBER` | 1GbaseX with auto-neg on |{% endif %}{% if include.speedLan contains '2' %}
-| 2 | `<4>change mode to 2(SGMII PHY)` | `TP MII` | 1Gb PHY |{% endif %}{% if include.speedLan contains '3' %}
-| 3 | `<4>change mode to 3(SGMII MAC)` | `MII` | 1Gb MAC |{% endif %}{% if include.speedLan contains '4' %}
-| 4 | `<4>change mode to 4(HiSGMII PHY)` | `TP MII` | 2.5Gb PHY |{% endif %}{% if include.speedLan contains '5' %}
-| 5 | `<4>change mode to 5(HiSGMII MAC)` | `MII` | 2.5Gb MAC |{% endif %}{% if include.speedLan contains '6' %}
-| 6 | `<4>change mode to 6(2500BaseX)` | `FIBER` | 2500baseX with auto-neg on |{% endif %}{% if include.speedLan contains '7' %}
-| 7 | `<4>change mode to 7(SGMII Force)` | `TP` | 1GbaseT with auto-neg off |{% endif %}{% if include.speedLan contains '8' %}
-| 8 | `<4>change mode to 8(HISGMII Force)` | `TP` | 2500baseT with auto-neg off |{% endif %}
-{% endif %}
+# Advanced settings
-## Change IP address
+## Setting management IP
```sh
# {{ flash }} get LAN_IP_ADDR
@@ -170,17 +173,6 @@ LAN_IP_ADDR=192.168.2.1
# {{ flash }} set LAN_IP_ADDR 192.168.1.1
```
-## Checking whether the connection with the OLT was successful (O5 state)
-
-```sh
-diag gpon get onu-state
-```
-
-## Querying a particular OMCI ME
-```sh
-# omcicli mib get MIB_IDX
-```
-
## Getting/Setting the L2 Bridge MTU
{% include alert.html content="Settings given via diag are not permanent after reboot" alert="Note" icon="svg-info" color="blue" %}
@@ -192,4 +184,20 @@ Port Speed
0 1538
2 2031
# diag switch set max-pkt-len port all length 2000
+```
+
+## Checking the currently active image
+```sh
+# nv getenv sw_active
+sw_active=1
+# nv getenv sw_version0
+sw_version0=V1_7_8_210412
+# nv getenv sw_version1
+sw_version1=V1_7_8_210412
+```
+
+## Booting to a different image
+```sh
+# nv setenv sw_commit 0|1
+# reboot
``` \ No newline at end of file