summaryrefslogtreecommitdiffstats
path: root/_ont/ont-huawei-ma5671a-fs-mod.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont/ont-huawei-ma5671a-fs-mod.md27
1 files changed, 14 insertions, 13 deletions
diff --git a/_ont/ont-huawei-ma5671a-fs-mod.md b/_ont/ont-huawei-ma5671a-fs-mod.md
index 7b04002..2d43ca8 100644
--- a/_ont/ont-huawei-ma5671a-fs-mod.md
+++ b/_ont/ont-huawei-ma5671a-fs-mod.md
@@ -11,20 +11,20 @@ layout: default
Flash the firmware image to image0 or image1 via [SSH](/ont-huawei-ma5671a/#flashing-a-new-rootfs-via-ssh) or via [TTL serial](/ont-huawei-ma5671a-ymodem) as usual.
-After the flash it is absolutely necessary to connect to the SFP via telnet using the IP 192.168.1.10:
+After flashing, it is absolutely necessary to connect to the SFP via telnet using the IP 192.168.1.10:
```sh
telnet 192.168.1.10
```
-Once connected via telnet to the SFP, execute the following commands, it will be necessary to wait a few minutes until the end of the automatic procedure:
+Once connected via telnet to the SFP, execute the following commands. Then wait a few minutes until the end of the automatic procedure:
```sh
firstboot
reboot
```
-Remember that with each flash of this firmware it is always necessary to perform the procedure described above, otherwise the SFP will not work!
+Performing the procedure described above is necessary after each flash of this firmware, otherwise the SFP will not work!
# Login info
@@ -40,17 +40,17 @@ Remember that with each flash of this firmware it is always necessary to perform
# GPON ONU status
-## Get the operational status of the ONU
+## Getting the operational status of the ONU
```sh
onu ploam_state_get
```
-## Get optical laser status
+## Getting optical laser status
```sh
otop -g s
```
-## Get information of the OLT vendor
+## Getting information of the OLT vendor
```sh
omci_pipe.sh meg 131 0
```
@@ -59,14 +59,14 @@ omci_pipe.sh meg 131 0
```sh
omci_pipe.sh meg MIB_IDX ME_IN
```
-Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number
+Where `MIB_IDX` is the MIB ID and `ME_IN` is the ME instance number.
-## Get VLAN table rule
+## Getting VLAN table rule
```sh
gtop -g "GPE VLAN rule"
```
-## Get GEM port status table
+## Getting GEM port status table
```sh
gtop -g e
```
@@ -78,7 +78,7 @@ To get the LAN Mode:
```sh
onu lan_port_status_get 0
```
-The `link_status` variable tells the current speed
+The `link_status` variable tells the current speed:
| Value (for `sgmii_mode` and `link_status`) | Speed |
| ------------------------------------------ | ---------------------------------- |
@@ -133,10 +133,11 @@ fw_setenv image1_version "YOUR_SW_VERSION_1"
# Advanced settings
-{% include alert.html content="Normally they are not necessary and it would be better not to touch them" alert="Note" icon="svg-warning" color="red" %}
+{% include alert.html content="Changing these is normally not necessary and not changing them is a good idea" alert="Note" icon="svg-warning" color="red" %}
## Setting custom OMCI MIB file
-You have to copy the MIB file to /etc/mibs and then run this command:
+
+Copy the MIB file to /etc/mibs, then run this command:
```sh
fw_setenv mib_file_custom "YOUR_MIB_FILENAME"
@@ -155,7 +156,7 @@ reboot
# SFP EEPROM settings
-{% include alert.html content="Normally they are not necessary and it would be better not to touch them" alert="Note" icon="svg-warning" color="red" %}
+{% include alert.html content="Changing these is normally not necessary and not changing them is a good idea" alert="Note" icon="svg-warning" color="red" %}
## Setting SFP vendor name
```sh