diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-huawei-ma5671a-fs-mod.md | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/_ont/ont-huawei-ma5671a-fs-mod.md b/_ont/ont-huawei-ma5671a-fs-mod.md index 622c743..5193db0 100644 --- a/_ont/ont-huawei-ma5671a-fs-mod.md +++ b/_ont/ont-huawei-ma5671a-fs-mod.md @@ -50,7 +50,7 @@ onu ploam_state_get otop -g s ``` -## Get information of the OLT +## Get information of the OLT vendor ```sh omci_pipe.sh meg 131 0 ``` @@ -90,42 +90,42 @@ To change the default lan mode value you can use `fw_setenv sgmii_mode`. The fir # GPON/OMCI settings -## Setting ONU GPON serial number +## Setting ONU GPON Serial Number ```sh fw_setenv onu_serial "YOUR_SERIAL_ASCII" ``` -## Setting ONU GPON ploam +## Setting ONU GPON PLOAM password ```sh fw_setenv onu_ploam "YOUR_PLOAM_ASCII" ``` -## Setting ONU GPON loid +## Setting ONU GPON LOID ```sh fw_setenv onu_loid "YOUR_LOID" ``` -## Setting ONU GPON loid password +## Setting ONU GPON LOID password ```sh fw_setenv onu_loid_password "YOUR_LOID_PASSWORD" ``` -## Setting OMCI vendor ID +## Setting OMCI vendor ID (ME 256) ```sh fw_setenv omci_vendor_id "YOUR_VENDOR_ID" ``` -## Setting OMCI equipment ID +## Setting OMCI equipment ID (ME 257) ```sh fw_setenv omci_equip_id "YOUR_EQUIP_ID" ``` -## Setting OMCI hardware ID +## Setting OMCI hardware version (ME 256) ```sh fw_setenv omci_hw_ver "YOUR_HW_VER" ``` -## Setting OMCI software version +## Setting OMCI software version (ME 7) ```sh fw_setenv image0_version "YOUR_SW_VERSION_0" fw_setenv image1_version "YOUR_SW_VERSION_1" @@ -135,7 +135,7 @@ fw_setenv image1_version "YOUR_SW_VERSION_1" {% include alert.html content="Normally they are not necessary and it would be better not to touch them" alert="Note" icon="svg-warning" color="red" %} -## Setting custom mib file +## Setting custom OMCI MIB file You have to copy the MIB file to /etc/mibs and then run this command: ```sh |