diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-genexis-ft-g2110c.md | 21 |
1 files changed, 10 insertions, 11 deletions
diff --git a/_ont/ont-genexis-ft-g2110c.md b/_ont/ont-genexis-ft-g2110c.md index 8a95a31..4aeee5a 100644 --- a/_ont/ont-genexis-ft-g2110c.md +++ b/_ont/ont-genexis-ft-g2110c.md @@ -43,7 +43,7 @@ The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be acc {% include image.html file="ft-g2110c-internal.jpg" alt="FiberTwist G2110C-2.5G Internal" caption="FiberTwist G2110C-2.5G Internal" %} -{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} +{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try swapping them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} ## List of software versions - C-5.6.1-R @@ -76,7 +76,7 @@ This ONT supports dual boot. # GPON/OMCI settings -{% include alert.html content="Some variables are write-protected, you need to unlock them before proceed" alert="Info" icon="svg-info" color="blue" %} +{% include alert.html content="Some variables are write-protected, you need to unlock them before proceeding" alert="Info" icon="svg-info" color="blue" %} Use the following command to unlock write-protected variables: @@ -93,7 +93,7 @@ Use the following command to unlock write-protected variables: ``` Reboot the ONT to apply any changes -You can check if the serial number was correclty changed using the following command: +You can check if the serial number was correctly changed using the following command: ```sh # diag gpon get serialnumber @@ -109,8 +109,8 @@ ZTEGaaa01234 GPON_PLOAM_PASSWD=AAAAAAAAAA # /etc/scripts/flash set GPON_PLOAM_PASSWD AAAAAAAAAA ``` -Looks like Genexis has also included an U-Boot variable to store the PLOAM. On currently known firmwares (5.6.1 and 5.7.0) it is not read by the `omci_app` daemon. -If you want to be future proof, put your PLOAM also on U-Boot env using the following command in the OS shell: +It seems Genexis has also included a U-Boot variable to store the PLOAM. On currently known firmwares (5.6.1 and 5.7.0) it is not read by the `omci_app` daemon. +For future-proofing reasons, set your PLOAM also on the before-mentioned U-Boot env using the following command in the OS shell: ```sh # nv setenv ploampwd 1234567890 @@ -119,10 +119,9 @@ ploampwd=1234567890 ## Setting OMCI software version (ME 7) The stock firware does not allow changing of the primary and standby software version. -Since the ONT uses the Luna SDK, the `/etc/scripts/flash` shell script can be easily modified by creating a custom firmware with -the same set of patches suggested e.g. for the [Technicolor AFM0002](/ont-technicolor-afm0002) ONT. +As the ONT uses the Luna SDK, the `/etc/scripts/flash` shell script can be easily modified by creating a custom firmware with the same set of patches suggested e.g. for the [Technicolor AFM0002](/ont-technicolor-afm0002) ONT. -You can then check if the software version was correctly changed with this command (take a look at the `Version` field): +You can then check if the software version was changed correctly with this command (take a look at the `Version` field): ```sh # omcicli mib get 7 @@ -154,14 +153,14 @@ ImageHash: 0x00000000000000000000000000000000 ```sh # nv setenv HV G2110CE2V1D0 ``` -Reboot ONT to apply the change +Reboot the ONT to apply the change ## Setting OMCI equipment ID (ME 257) ```sh # nv setenv ProdName FT-G2110C-2.5G ``` -Reboot ONT to apply the change +Reboot the ONT to apply the change # Advanced settings @@ -173,7 +172,7 @@ LAN_IP_ADDR=192.168.1.1 ``` # Known Bugs -- Web UI can be enabled by modding the firmware, but without an attached fiber the daemon will crash +- The web UI can be enabled by modding the firmware, but the daemon will crash if no optical signal is received # Miscellaneous Links - [FiberTwist G2110C-2.5G](https://genexis.eu/content/uploads/2020/07/FiberTwist-G2110C-2.5G-Installation-Guide-v1.0-EN.pdf) |