summaryrefslogtreecommitdiffstats
path: root/_ont/ont-genexis-ft-g2110c.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont/ont-genexis-ft-g2110c.md45
1 files changed, 25 insertions, 20 deletions
diff --git a/_ont/ont-genexis-ft-g2110c.md b/_ont/ont-genexis-ft-g2110c.md
index 5f49cf1..7c62398 100644
--- a/_ont/ont-genexis-ft-g2110c.md
+++ b/_ont/ont-genexis-ft-g2110c.md
@@ -7,22 +7,24 @@ parent: Genexis
# Hardware Specifications
-| | |
-| ----------- | ------------------------------------------------------------ |
-| Vendor | Genexis |
-| Model | FiberTwist G2110C-2.5G |
-| Chipset | RTL9601D |
-| Flash | 128MB |
-| RAM | 32MB |
-| System | Linux 3.18 (Luna SDK 3.3) |
-| 2.5GBaseT | Yes |
-| Optics | SC/APC |
-| IP address | 192.168.100.1/24 or 192.168.1.1/24 |
-| Web Gui | Can be enabled, locked down by iptables rule and missing CSS |
-| Telnet | ✅ user `company`, password `amyM77yY` |
-| Form Factor | ONT |
-
-# External/Internal Photo
+| | |
+| --------------- | ------------------------------------------------------------ |
+| Vendor/Brand | Genexis FiberTwist |
+| Model | G2110C-2.5G |
+| Chipset | Realtek RTL9601D |
+| Flash | 128MB |
+| RAM | 32MB |
+| System | Linux 3.18 (Luna SDK 3.3) |
+| 2.5GBaseT | Yes |
+| Optics | SC/APC |
+| IP address | 192.168.100.1/24 or 192.168.1.1/24 |
+| Web Gui | Can be enabled, locked down by iptables rule and missing CSS |
+| SSH | |
+| Telnet | ✅ user `company`, password `amyM77yY` |
+| Serial | ✅ |
+| Serial baud | 115200 |
+| Serial encoding | 8-N-1 |
+| Form Factor | ONT |
{% include image.html file="ft-g2110c-front.jpg" alt="FiberTwist G2110C-2.5G Front" caption="FiberTwist G2110C-2.5G Front" %}
@@ -35,9 +37,14 @@ parent: Genexis
{% include image.html file="ft-g2110c-optical-header-3.jpg" alt="FiberTwist G2110C-2.5G Optical Header installation backplate" caption="FiberTwist G2110C-2.5G Optical Header installation backplate" %}
-## Internal (TTL is on CM3 header)
+## Serial
+
+The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. To accept TX line commands, the GND of the TTL adapter should be attached to the ONT's shield:
+
{% include image.html file="ft-g2110c-internal.jpg" alt="FiberTwist G2110C-2.5G Internal" caption="FiberTwist G2110C-2.5G Internal" %}
+{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
+
## List of software versions
- C-5.6.1-R
- C-5.7.0-R
@@ -67,9 +74,7 @@ This ONT supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one
-## List of firmwares and files
-
-# Useful Commands
+# General Settings and Useful Commands
{% include alert.html content="Some variables are write-protected, you need to unlock them before proceed" alert="Info" icon="svg-info" color="blue" %}