diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-genexis-ft-g2110c.md | 53 |
1 files changed, 27 insertions, 26 deletions
diff --git a/_ont/ont-genexis-ft-g2110c.md b/_ont/ont-genexis-ft-g2110c.md index 36faf46..8a95a31 100644 --- a/_ont/ont-genexis-ft-g2110c.md +++ b/_ont/ont-genexis-ft-g2110c.md @@ -74,7 +74,7 @@ This ONT supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one -# General Settings and Useful Commands +# GPON/OMCI settings {% include alert.html content="Some variables are write-protected, you need to unlock them before proceed" alert="Info" icon="svg-info" color="blue" %} @@ -84,7 +84,7 @@ Use the following command to unlock write-protected variables: # nv setenv ProtectEnv 0 ``` -## Getting/Setting the ONT's S/N +## Getting/Setting ONU GPON Serial Number {% include alert.html content="If your serial number has letters after the Vendor ID (e.g. ZTEGAAA01234), put them in lower case (e.g. ZTEGaaa01234)" alert="Info" icon="svg-info" color="blue" %} @@ -100,28 +100,7 @@ You can check if the serial number was correclty changed using the following com ZTEGaaa01234 ``` -## Changing the Hardware Version - -```sh -# nv setenv HV G2110CE2V1D0 -``` -Reboot ONT to apply the change - -## Changing the Equipment ID - -```sh -# nv setenv ProdName FT-G2110C-2.5G -``` -Reboot ONT to apply the change - -## Changing the IP address -```sh -# /etc/scripts/flash get LAN_IP_ADDR -LAN_IP_ADDR=192.168.1.1 -# /etc/scripts/flash set LAN_IP_ADDR 192.168.1.1 - ``` - -## Getting/Setting the ONT's PLOAM password +## Getting/Setting ONU GPON PLOAM password {% include alert.html content="The PLOAM password is stored in ASCII format" alert="Info" icon="svg-info" color="blue" %} @@ -137,8 +116,7 @@ If you want to be future proof, put your PLOAM also on U-Boot env using the foll # nv setenv ploampwd 1234567890 ploampwd=1234567890 ``` - -## Changing the reported firmware version +## Setting OMCI software version (ME 7) The stock firware does not allow changing of the primary and standby software version. Since the ONT uses the Luna SDK, the `/etc/scripts/flash` shell script can be easily modified by creating a custom firmware with @@ -171,6 +149,29 @@ ImageHash: 0x00000000000000000000000000000000 ================================= ``` +## Setting OMCI hardware version (ME 256) + +```sh +# nv setenv HV G2110CE2V1D0 +``` +Reboot ONT to apply the change + +## Setting OMCI equipment ID (ME 257) + +```sh +# nv setenv ProdName FT-G2110C-2.5G +``` +Reboot ONT to apply the change + +# Advanced settings + +## Setting management IP +```sh +# /etc/scripts/flash get LAN_IP_ADDR +LAN_IP_ADDR=192.168.1.1 +# /etc/scripts/flash set LAN_IP_ADDR 192.168.1.1 + ``` + # Known Bugs - Web UI can be enabled by modding the firmware, but without an attached fiber the daemon will crash |