diff options
author | Simone <26844016+simonebortolin@users.noreply.github.com> | 2023-10-10 13:17:08 +0200 |
---|---|---|
committer | GitHub <noreply@github.com> | 2023-10-10 13:17:08 +0200 |
commit | c5e6c5123dd68fbbd4b4f3d46c5973793741f734 (patch) | |
tree | fcea32d246e60eb1f57cfcda66078f2a6199ce48 /_ont/ont-zte-f6005.md | |
parent | Update ont-zte-f6005.md (diff) | |
parent | Correct (hopefully) all grammar mistakes and change phrasing to make things easier to understand (#282) (diff) | |
download | hack-gpon.github.io-simonebortolin-patch-n19.tar hack-gpon.github.io-simonebortolin-patch-n19.tar.gz hack-gpon.github.io-simonebortolin-patch-n19.tar.bz2 hack-gpon.github.io-simonebortolin-patch-n19.tar.lz hack-gpon.github.io-simonebortolin-patch-n19.tar.xz hack-gpon.github.io-simonebortolin-patch-n19.tar.zst hack-gpon.github.io-simonebortolin-patch-n19.zip |
Diffstat (limited to '')
-rw-r--r-- | _ont/ont-zte-f6005.md | 27 |
1 files changed, 14 insertions, 13 deletions
diff --git a/_ont/ont-zte-f6005.md b/_ont/ont-zte-f6005.md index 91102e6..93d6bf2 100644 --- a/_ont/ont-zte-f6005.md +++ b/_ont/ont-zte-f6005.md @@ -67,7 +67,7 @@ You need a 3.3V SPI programmer (like a modded CH341a) to read and write back the {% include alert.html content="This was tested only on a TIM V6.0.10N20 firmware!" alert="Note" icon="svg-info" color="blue" %} -After you got a full dump of your ONT, here is the procedure to replace the original bootloader with the CIG one enable the serial port: +After getting a full dump of your ONT, here is the procedure to replace the original bootloader with CIG's to enable the serial port: Cut old bootloader: ```sh @@ -93,11 +93,11 @@ After powering up the ONT, the serial port will print this message: To access full U-Boot a special escape sequence is needed. -If you use TeraTerm software, create a simple MACRO file that contains this code: +If Tera Term is used, create a simple MACRO file that contains this code: `send $1B $1D $0F $0B` -Configure TeraTerm with the correct serial parameters (refer to **Serial** paragraph), select the created MACRO file **BEFORE** powering up the ONT but **DON'T OPEN IT NOW**, power-up the ONT and when you see the above message, quickly open the macro to reach the U-Boot prompt: +Configure Tera Term with the correct serial parameters (refer to **Serial** paragraph), select the created MACRO file **BEFORE** powering up the ONT but **DON'T OPEN IT NOW**, power-up the ONT and when you see the above message, quickly open the macro to reach the U-Boot prompt: ```sh 9601D# @@ -105,12 +105,12 @@ Configure TeraTerm with the correct serial parameters (refer to **Serial** parag {% include alert.html content="Note that this proceedure needs to be done each time you power-cycle the ONT" alert="Note" icon="svg-info" color="blue" %} -Now with the U-Boot prompt a custom firmware that enable TELNET can be flashed. -Please note that if you use a **TIM** or **OpenFiber** base firmware, the TTL will be silent after kernel loading because it was disabled at kernel level. +Now with the U-Boot prompt a custom firmware that enables TELNET can be flashed. +Please note that if a **TIM** or **OpenFiber** base firmware is used, the TTL will be silent after kernel loading because it is disabled at kernel level. -Here is the procedure to flash a custom firmware on your ONT via the U-Boot console: +Here is the procedure to flash a custom firmware on the ONT via the U-Boot console: -- Attach your ONT via ethernet cable to your PC and configure it to have IP **192.168.1.2** +- Attach the ONT via ethernet cable to your PC and configure it to have IP **192.168.1.2** - Launch TFTP server and place custom firmware inside its root folder renamed into `cramfs.img.crc`. Be sure that the file has this name, otherwise the upgrade procedure will stop immediately - Run this command on U-Boot prompt: @@ -143,7 +143,7 @@ Writing 6619136 B from 80400000 to 00200000... 100% ~ 0084ffff/6619136 B [Done] ``` -{% include alert.html content="Please note that some OLTs (like Alcatel with TIM in Italy) needs to have software image 0 or 1 as active. So in this case you have to do these commands twice to flash image on both slot:" alert="Note" icon="svg-info" color="blue" %} +{% include alert.html content="Please note that some OLTs (like TIM's Alcatel OLTs in Italy) need to have software image 0 or 1 set as active. So in this case, these commands will have to be executed twice to flash the image on both slots:" alert="Note" icon="svg-info" color="blue" %} **ImageA**: @@ -153,7 +153,7 @@ set activeimage imagea saveenv ``` -and flash image with the `upgdimage` +And flash image with the `upgdimage`. **ImageB**: @@ -162,16 +162,17 @@ set activeimage imageb saveenv ``` -and flash image with the `upgdimage` +And flash image with the `upgdimage`. -So you will have both slot with the same firmware version and avoid the swap from the OLT +This way both slots will have the same firmware version and will avoid any swap by the OLT. -After these steps, you can power-cycle ONT and logon on TELNET with `root\admin` credentials. From this moment you can simply spoof your ONT with the usual commands. +After these steps, power-cycle ONT and login via TELNET with `root\admin` credentials. From this moment you can simply spoof your ONT with the usual commands. # Known Bugs -The buffer size of the hardware is suboptimal is suboptimal: because of this the ONT is unable to work at full speed during uploads if the server is geographically, and/or latency-wise, far. There are no known problems if there is only one person in the GPON tree. +The buffer size of the hardware is suboptimal is suboptimal: because of this the ONT is unable to work at full speed during uploads if the server is geographically, and/or latency-wise, far. There are no known problems if there is only one person on the GPON tree. In versions V6.0.10N14 and V6.0.10P2N02 this problem is felt more with newer firmware as in the new versions (V6.0.10N20, V6.0.10P2N18, V6.0.10P2N19), an attempt is made to avoid buffer filling by means of pause frames. Not all routers support pause frames and some may still suffer from problems with the latest updates. In version V6.0.10P2N18, problems were found in download speeds with 1 Gbps links. + |