blob: a92287d1e51bfcf1dc6e13b97d5cf07f512db878 (
plain) (
tree)
|
|
---
title: T&W TWC GPON657
has_children: false
layout: default
parent: T&W
---
# Hardware Specifications
| | |
| ---------------- | ---------------------------------- |
| Vendor/Brand | T&W |
| Model | TWC GPON657 |
| ODM | ✅ |
| Chipset | Realtek RTL9601CI |
| Flash | 16 MB |
| RAM | 64 MB |
| System | Linux (Luna SDK) |
| HSGMII | Yes |
| Optics | SC/APC |
| IP address | |
| Web Gui | ✅ user `admin`, password `system` |
| SSH | ✅ user `admin`, password `system` |
| Telnet | |
| Serial | |
| Form Factor | miniONT SFP |
## Firmware is interchangeable with:
- [VSOL V2801F](/ont-vsol-v2801f)
- [UFiber UF-Instant](/ont-ufiber-uf-instant)
## List of firmwares and files
- [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/TWCGPON657)
The reccomended version are `C00R657V2801F_V1.9.0-220404.tar` because it is the V2801F firmware for T&W TWC GPON657.
{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `C00R657V2801F_V1.9.0-220404.tar`. Before editing the speed make sure your hardware supports it.' %}
# Known Bugs
VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII
You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE
# Miscellaneous Links
- [Hacking RTL960x](https://github.com/Anime4000/RTL960x)
- [forum lowyat](https://forum.lowyat.net/topic/4925452/+460)
|
