blob: 538ebd74d88f645c2fedbd9d03bdf03efc8d4885 (
plain) (
tree)
|
|
---
title: Nokia G-010G-T
has_children: false
layout: default
parent: Nokia
---
# Hardware Specifications
| | |
| ----------- | -------- |
| Vendor | Nokia |
| Model | G-010G-T |
| Chipset | RTL9601D |
| Flash | 16MB |
| RAM | 32MB |
| System | CIG (Luna SDK 1.9.0) |
| HSGMII | ✅ |
| Optics | SC/APC |
| IP address | 192.168.100.1 (factory reseted unit use IP 10.89.42.157/16) |
| Web Gui | ✅ user `admin`, password `1234` |
| Telnet | ✅ user `ONTUSER` password should be calculated, each ONT has a different one |
| SSH | Can be enabled, locked down by iptables rule |
| Form Factor | ONT |
# External/Internal Photo
{% include image.html file="q-010g-t_front.jpg" alt="Nokia G-010G-T Front" caption="Nokia G-010G-T Front" %}
{% include image.html file="q-010g-t_back.jpg" alt="Nokia G-010G-T Back" caption="Nokia G-010G-T Back" %}
{% include image.html file="q-010g-t_ports.jpg" alt="Nokia G-010G-T Ports" caption="Nokia G-010G-T Ports" %}
{% include image.html file="q-010g-t_internal_up.jpg" alt="Nokia G-010G-T Internal Up" caption="Nokia G-010G-T Internal Up" %}
{% include image.html file="q-010g-t_internal_down.jpg" alt="Nokia G-010G-T Internal Down" caption="Nokia G-010G-T Internal Down" %}
## List of software versions
- 3FE49717AOCK12
## List of partitions
| dev | size | erasesize | name |
| ----- | -------- | --------- | --------------- |
| mtd0 | 00040000 | 00001000 | "Boot" |
| mtd1 | 00002000 | 00001000 | "Config" |
| mtd2 | 00002000 | 00001000 | "ImageA" |
| mtd3 | 0003c000 | 00001000 | "ImageB" |
## Serial Console
The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. To accept TX line commands, the GND of the TTL adapter should be attached to the ONT's shield:
{% include image.html file="q-010g-t_ttl.jpg" alt="Nokia G-010G-T TTL" caption="Nokia G-010G-T TTL" %}
At prompt to logon follow these commands:
```sh
ONT>enable
#ONT>login
User name:ONTUSER
Password: ****
```
# Access Full Shell
To access a complete linux shell just type:
```sh
#ONT>system
#ONT/system>shell
```
# Useful Commands
## Committing changes to the OMCI MIB tables for GPON operation
```sh
#ONT>system
#ONT/system>mib
#ONT/system/mib>reset
```
## Getting/Setting the ONT's S/N
```sh
#ONT>system
#ONT/system>misc
#ONT/system/misc>eqsn set ""
---ATECMDRESULT--- OK
#ONT/system/misc>eqsn get
eqsn:
---ATECMDRESULT--- OK
```
## Getting/Setting the ONT's Vendor
```sh
#ONT>system
#ONT/system>misc
#ONT/system/misc>vendor get
vendor: ALCL
---ATECMDRESULT--- OK
#ONT/system/misc>eqsnvend get
vendor: ALCL
---ATECMDRESULT--- OK
#ONT/system/misc>vendor set "ALCL"
---ATECMDRESULT--- OK
#ONT/system/misc>eqsnvend set "ALCL"
---ATECMDRESULT--- OK
```
## Getting/Setting the ONT's Equipment ID
```sh
#ONT>system
#ONT/system>misc
#ONT/system/misc>eqid set "FT-G2110C-2.5G"
---ATECMDRESULT--- OK
#ONT/system/misc>eqid get
eqid: FT-G2110C-2.5G
hex_eqid: 0x46542d4732313130432d322e3547000000000000
---ATECMDRESULT--- OK
```
## Getting/Setting the ONT's Hardware Version
```sh
#ONT>system
#ONT/system>misc
#ONT/system/misc>eqvid get
eqvid: 3FE45458ABAA06
hex_eqvid: 0x3346453435343538414241413036
---ATECMDRESULT--- OK
#ONT/system/misc>eqvid set "G2110CE2V1D0"
```
## Getting/Setting the ONT's IP/Netmask
```sh
#ONT>system
#ONT/system>misc
#ONT/system/misc>admin_ip get
admin_ip: 192.168.100.1
---ATECMDRESULT--- OK
#ONT/system/misc>admin_ip set 192.168.1.1
#ONT/system/misc>admin_mask get
admin_mask: 255.255.255.0
---ATECMDRESULT--- OK
#ONT/system/misc>admin_mask set 255.255.255.0
```
## Getting Operational Status
```sh
#ONT>traffic
#ONT/system>pon
#ONT/system/pon>show link
----------------- LINK STATE -----------------
Link State: ACTIVE
Operation State Machine: OPERATION (O5)
----------------- STATE END -----------------
```
## Querying a particular OMCI ME
```sh
#ONT>system
#ONT/system>mib
#ONT/system/mib>show 256
Table Ontg, Ont-g, total 1 instances
EntityID = 0x0000
VID = "GNXS"
Version = 47 32 31 31 30 43 45 32 56 31 44 30 00 00
SerialNum = 47 4e 58 53 05 54 6f b0
TraffMgtOpt = 0
AtmCCOpt = 0
BatteryBack = 1
AdminState = 0
OpState = 0
OnuSurvivalTime = 0
Loid = ""
Password = ""
AuthState = 0
OntState = 1
```
## Setting the ONT's Software Version
The following must be typed from the standard linux shell:
```sh
# echo SWVER=C-5.6.1-R > /mnt/rwdir/sys.cfg
```
# Miscellaneous Links
- [MIB file parser](https://github.com/nanomad/nokia-ont-mib-parser) for NOKIA's GPON ONTs (*helps you parsing the .mib file located in `/mnt/rwdir`*)
- [ispreview.co.uk](https://www.ispreview.co.uk/index.php/2022/09/pictured-openreachs-future-2-5gbps-ont-for-fttp-broadband.html)
|
