diff options
Diffstat (limited to 'source/Generating/Noise3DGenerator.cpp')
| -rw-r--r-- | source/Generating/Noise3DGenerator.cpp | 576 |
1 files changed, 0 insertions, 576 deletions
diff --git a/source/Generating/Noise3DGenerator.cpp b/source/Generating/Noise3DGenerator.cpp deleted file mode 100644 index 03626a800..000000000 --- a/source/Generating/Noise3DGenerator.cpp +++ /dev/null @@ -1,576 +0,0 @@ - -// Nosie3DGenerator.cpp - -// Generates terrain using 3D noise, rather than composing. Is a test. - -#include "Globals.h" -#include "Noise3DGenerator.h" -#include "../OSSupport/File.h" -#include "../../iniFile/iniFile.h" -#include "../LinearInterpolation.h" -#include "../LinearUpscale.h" - - - - - -/* -// Perform an automatic test of upscaling upon program start (use breakpoints to debug): - -class Test -{ -public: - Test(void) - { - DoTest1(); - DoTest2(); - } - - - void DoTest1(void) - { - float In[3 * 3 * 3]; - for (int i = 0; i < ARRAYCOUNT(In); i++) - { - In[i] = (float)(i % 5); - } - Debug3DNoise(In, 3, 3, 3, "Upscale3D in"); - float Out[17 * 33 * 35]; - LinearUpscale3DArray(In, 3, 3, 3, Out, 8, 16, 17); - Debug3DNoise(Out, 17, 33, 35, "Upscale3D test"); - } - - - void DoTest2(void) - { - float In[3 * 3]; - for (int i = 0; i < ARRAYCOUNT(In); i++) - { - In[i] = (float)(i % 5); - } - Debug2DNoise(In, 3, 3, "Upscale2D in"); - float Out[17 * 33]; - LinearUpscale2DArray(In, 3, 3, Out, 8, 16); - Debug2DNoise(Out, 17, 33, "Upscale2D test"); - } - -} gTest; -//*/ - - - - - -/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// cNoise3DGenerator: - -cNoise3DGenerator::cNoise3DGenerator(cChunkGenerator & a_ChunkGenerator) : - super(a_ChunkGenerator), - m_Perlin(1000), - m_Cubic(1000) -{ - m_Perlin.AddOctave(1, (NOISE_DATATYPE)0.5); - m_Perlin.AddOctave((NOISE_DATATYPE)0.5, 1); - m_Perlin.AddOctave((NOISE_DATATYPE)0.5, 2); - - #if 0 - // DEBUG: Test the noise generation: - // NOTE: In order to be able to run MCS with this code, you need to increase the default thread stack size - // In MSVC, it is done in Project Settings -> Configuration Properties -> Linker -> System, set Stack reserve size to at least 64M - m_SeaLevel = 62; - m_HeightAmplification = 0; - m_MidPoint = 75; - m_FrequencyX = 4; - m_FrequencyY = 4; - m_FrequencyZ = 4; - m_AirThreshold = 0.5; - - const int NumChunks = 4; - NOISE_DATATYPE Noise[NumChunks][cChunkDef::Width * cChunkDef::Width * cChunkDef::Height]; - for (int x = 0; x < NumChunks; x++) - { - GenerateNoiseArray(x, 5, Noise[x]); - } - - // Save in XY cuts: - cFile f1; - if (f1.Open("Test_XY.grab", cFile::fmWrite)) - { - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int y = 0; y < cChunkDef::Height; y++) - { - for (int i = 0; i < NumChunks; i++) - { - int idx = y * cChunkDef::Width + z * cChunkDef::Width * cChunkDef::Height; - unsigned char buf[cChunkDef::Width]; - for (int x = 0; x < cChunkDef::Width; x++) - { - buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 32 * Noise[i][idx++])))); - } - f1.Write(buf, cChunkDef::Width); - } - } // for y - } // for z - } // if (XY file open) - - cFile f2; - if (f2.Open("Test_XZ.grab", cFile::fmWrite)) - { - for (int y = 0; y < cChunkDef::Height; y++) - { - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int i = 0; i < NumChunks; i++) - { - int idx = y * cChunkDef::Width + z * cChunkDef::Width * cChunkDef::Height; - unsigned char buf[cChunkDef::Width]; - for (int x = 0; x < cChunkDef::Width; x++) - { - buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 32 * Noise[i][idx++])))); - } - f2.Write(buf, cChunkDef::Width); - } - } // for z - } // for y - } // if (XZ file open) - #endif // 0 -} - - - - - -cNoise3DGenerator::~cNoise3DGenerator() -{ - // Nothing needed yet -} - - - - - -void cNoise3DGenerator::Initialize(cWorld * a_World, cIniFile & a_IniFile) -{ - m_World = a_World; - - // Params: - m_SeaLevel = a_IniFile.GetValueSetI("Generator", "Noise3DSeaLevel", 62); - m_HeightAmplification = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DHeightAmplification", 0); - m_MidPoint = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DMidPoint", 75); - m_FrequencyX = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyX", 8); - m_FrequencyY = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyY", 8); - m_FrequencyZ = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyZ", 8); - m_AirThreshold = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DAirThreshold", 0.5); -} - - - - - -void cNoise3DGenerator::GenerateBiomes(int a_ChunkX, int a_ChunkZ, cChunkDef::BiomeMap & a_BiomeMap) -{ - for (unsigned int i = 0; i < ARRAYCOUNT(a_BiomeMap); i++) - { - a_BiomeMap[i] = biExtremeHills; - } -} - - - - - -void cNoise3DGenerator::DoGenerate(int a_ChunkX, int a_ChunkZ, cChunkDesc & a_ChunkDesc) -{ - NOISE_DATATYPE Noise[17 * 257 * 17]; - GenerateNoiseArray(a_ChunkX, a_ChunkZ, Noise); - - // Output noise into chunk: - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int y = 0; y < cChunkDef::Height; y++) - { - int idx = z * 17 * 257 + y * 17; - for (int x = 0; x < cChunkDef::Width; x++) - { - NOISE_DATATYPE n = Noise[idx++]; - BLOCKTYPE BlockType; - if (n > m_AirThreshold) - { - BlockType = (y > m_SeaLevel) ? E_BLOCK_AIR : E_BLOCK_STATIONARY_WATER; - } - else - { - BlockType = E_BLOCK_STONE; - } - a_ChunkDesc.SetBlockType(x, y, z, BlockType); - } - } - } - - UpdateHeightmap(a_ChunkDesc); - ComposeTerrain (a_ChunkDesc); -} - - - - - -void cNoise3DGenerator::GenerateNoiseArray(int a_ChunkX, int a_ChunkZ, NOISE_DATATYPE * a_OutNoise) -{ - NOISE_DATATYPE NoiseO[DIM_X * DIM_Y * DIM_Z]; // Output for the Perlin noise - NOISE_DATATYPE NoiseW[DIM_X * DIM_Y * DIM_Z]; // Workspace that the noise calculation can use and trash - - // Our noise array has different layout, XZY, instead of regular chunk's XYZ, that's why the coords are "renamed" - NOISE_DATATYPE StartX = ((NOISE_DATATYPE)(a_ChunkX * cChunkDef::Width)) / m_FrequencyX; - NOISE_DATATYPE EndX = ((NOISE_DATATYPE)((a_ChunkX + 1) * cChunkDef::Width) - 1) / m_FrequencyX; - NOISE_DATATYPE StartZ = ((NOISE_DATATYPE)(a_ChunkZ * cChunkDef::Width)) / m_FrequencyZ; - NOISE_DATATYPE EndZ = ((NOISE_DATATYPE)((a_ChunkZ + 1) * cChunkDef::Width) - 1) / m_FrequencyZ; - NOISE_DATATYPE StartY = 0; - NOISE_DATATYPE EndY = ((NOISE_DATATYPE)256) / m_FrequencyY; - - m_Perlin.Generate3D(NoiseO, DIM_X, DIM_Y, DIM_Z, StartX, EndX, StartY, EndY, StartZ, EndZ, NoiseW); - - // DEBUG: Debug3DNoise(NoiseO, DIM_X, DIM_Y, DIM_Z, Printf("Chunk_%d_%d_orig", a_ChunkX, a_ChunkZ)); - - // Precalculate a "height" array: - NOISE_DATATYPE Height[DIM_X * DIM_Z]; // Output for the cubic noise heightmap ("source") - m_Cubic.Generate2D(Height, DIM_X, DIM_Z, StartX / 25, EndX / 25, StartZ / 25, EndZ / 25); - for (unsigned int i = 0; i < ARRAYCOUNT(Height); i++) - { - Height[i] = abs(Height[i]) * m_HeightAmplification + 1; - } - - // Modify the noise by height data: - for (int y = 0; y < DIM_Y; y++) - { - NOISE_DATATYPE AddHeight = (y * UPSCALE_Y - m_MidPoint) / 20; - AddHeight *= AddHeight * AddHeight; - for (int z = 0; z < DIM_Z; z++) - { - NOISE_DATATYPE * CurRow = &(NoiseO[y * DIM_X + z * DIM_X * DIM_Y]); - for (int x = 0; x < DIM_X; x++) - { - CurRow[x] += AddHeight / Height[x + DIM_X * z]; - } - } - } - - // DEBUG: Debug3DNoise(NoiseO, DIM_X, DIM_Y, DIM_Z, Printf("Chunk_%d_%d_hei", a_ChunkX, a_ChunkZ)); - - // Upscale the Perlin noise into full-blown chunk dimensions: - LinearUpscale3DArray( - NoiseO, DIM_X, DIM_Y, DIM_Z, - a_OutNoise, UPSCALE_X, UPSCALE_Y, UPSCALE_Z - ); - - // DEBUG: Debug3DNoise(a_OutNoise, 17, 257, 17, Printf("Chunk_%d_%d_lerp", a_ChunkX, a_ChunkZ)); -} - - - - - -void cNoise3DGenerator::UpdateHeightmap(cChunkDesc & a_ChunkDesc) -{ - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int x = 0; x < cChunkDef::Width; x++) - { - for (int y = cChunkDef::Height - 1; y > 0; y--) - { - if (a_ChunkDesc.GetBlockType(x, y, z) != E_BLOCK_AIR) - { - a_ChunkDesc.SetHeight(x, z, y); - break; - } - } // for y - } // for x - } // for z -} - - - - - -void cNoise3DGenerator::ComposeTerrain(cChunkDesc & a_ChunkDesc) -{ - // Make basic terrain composition: - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int x = 0; x < cChunkDef::Width; x++) - { - int LastAir = a_ChunkDesc.GetHeight(x, z) + 1; - bool HasHadWater = false; - for (int y = LastAir - 1; y > 0; y--) - { - switch (a_ChunkDesc.GetBlockType(x, y, z)) - { - case E_BLOCK_AIR: - { - LastAir = y; - break; - } - case E_BLOCK_STONE: - { - if (LastAir - y > 3) - { - break; - } - if (HasHadWater) - { - a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_SAND); - } - else - { - a_ChunkDesc.SetBlockType(x, y, z, (LastAir == y + 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT); - } - break; - } - case E_BLOCK_STATIONARY_WATER: - { - LastAir = y; - HasHadWater = true; - break; - } - } // switch (GetBlockType()) - } // for y - a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK); - } // for x - } // for z -} - - - - - -/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// cNoise3DComposable: - -cNoise3DComposable::cNoise3DComposable(int a_Seed) : - m_Noise1(a_Seed + 1000), - m_Noise2(a_Seed + 2000), - m_Noise3(a_Seed + 3000) -{ -} - - - - - -void cNoise3DComposable::Initialize(cIniFile & a_IniFile) -{ - // Params: - m_SeaLevel = a_IniFile.GetValueSetI("Generator", "Noise3DSeaLevel", 62); - m_HeightAmplification = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DHeightAmplification", 0); - m_MidPoint = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DMidPoint", 75); - m_FrequencyX = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyX", 10); - m_FrequencyY = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyY", 10); - m_FrequencyZ = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyZ", 10); - m_AirThreshold = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DAirThreshold", 0.5); -} - - - - - -void cNoise3DComposable::GenerateNoiseArrayIfNeeded(int a_ChunkX, int a_ChunkZ) -{ - if ((a_ChunkX == m_LastChunkX) && (a_ChunkZ == m_LastChunkZ)) - { - // The noise for this chunk is already generated in m_Noise - return; - } - m_LastChunkX = a_ChunkX; - m_LastChunkZ = a_ChunkZ; - - // Upscaling parameters: - const int UPSCALE_X = 8; - const int UPSCALE_Y = 4; - const int UPSCALE_Z = 8; - - // Precalculate a "height" array: - NOISE_DATATYPE Height[17 * 17]; // x + 17 * z - for (int z = 0; z < 17; z += UPSCALE_Z) - { - NOISE_DATATYPE NoiseZ = ((NOISE_DATATYPE)(a_ChunkZ * cChunkDef::Width + z)) / m_FrequencyZ; - for (int x = 0; x < 17; x += UPSCALE_X) - { - NOISE_DATATYPE NoiseX = ((NOISE_DATATYPE)(a_ChunkX * cChunkDef::Width + x)) / m_FrequencyX; - NOISE_DATATYPE val = abs(m_Noise1.CubicNoise2D(NoiseX / 5, NoiseZ / 5)) * m_HeightAmplification + 1; - Height[x + 17 * z] = val * val * val; - } - } - - for (int y = 0; y < 257; y += UPSCALE_Y) - { - NOISE_DATATYPE NoiseY = ((NOISE_DATATYPE)y) / m_FrequencyY; - NOISE_DATATYPE AddHeight = (y - m_MidPoint) / 20; - AddHeight *= AddHeight * AddHeight; - NOISE_DATATYPE * CurFloor = &(m_NoiseArray[y * 17 * 17]); - for (int z = 0; z < 17; z += UPSCALE_Z) - { - NOISE_DATATYPE NoiseZ = ((NOISE_DATATYPE)(a_ChunkZ * cChunkDef::Width + z)) / m_FrequencyZ; - for (int x = 0; x < 17; x += UPSCALE_X) - { - NOISE_DATATYPE NoiseX = ((NOISE_DATATYPE)(a_ChunkX * cChunkDef::Width + x)) / m_FrequencyX; - CurFloor[x + 17 * z] = - m_Noise1.CubicNoise3D(NoiseX, NoiseY, NoiseZ) * (NOISE_DATATYPE)0.5 + - m_Noise2.CubicNoise3D(NoiseX / 2, NoiseY / 2, NoiseZ / 2) + - m_Noise3.CubicNoise3D(NoiseX / 4, NoiseY / 4, NoiseZ / 4) * 2 + - AddHeight / Height[x + 17 * z]; - } - } - // Linear-interpolate this XZ floor: - LinearUpscale2DArrayInPlace(CurFloor, 17, 17, UPSCALE_X, UPSCALE_Z); - } - - // Finish the 3D linear interpolation by interpolating between each XZ-floors on the Y axis - for (int y = 1; y < cChunkDef::Height; y++) - { - if ((y % UPSCALE_Y) == 0) - { - // This is the interpolation source floor, already calculated - continue; - } - int LoFloorY = (y / UPSCALE_Y) * UPSCALE_Y; - int HiFloorY = LoFloorY + UPSCALE_Y; - NOISE_DATATYPE * LoFloor = &(m_NoiseArray[LoFloorY * 17 * 17]); - NOISE_DATATYPE * HiFloor = &(m_NoiseArray[HiFloorY * 17 * 17]); - NOISE_DATATYPE * CurFloor = &(m_NoiseArray[y * 17 * 17]); - NOISE_DATATYPE Ratio = ((NOISE_DATATYPE)(y % UPSCALE_Y)) / UPSCALE_Y; - int idx = 0; - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int x = 0; x < cChunkDef::Width; x++) - { - CurFloor[idx] = LoFloor[idx] + (HiFloor[idx] - LoFloor[idx]) * Ratio; - idx += 1; - } - idx += 1; // Skipping one X column - } - } - - // The noise array is now fully interpolated - /* - // DEBUG: Output two images of the array, sliced by XY and XZ: - cFile f1; - if (f1.Open(Printf("Chunk_%d_%d_XY.raw", a_ChunkX, a_ChunkZ), cFile::fmWrite)) - { - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int y = 0; y < cChunkDef::Height; y++) - { - int idx = y * 17 * 17 + z * 17; - unsigned char buf[16]; - for (int x = 0; x < cChunkDef::Width; x++) - { - buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 128 * m_Noise[idx++])))); - } - f1.Write(buf, 16); - } // for y - } // for z - } // if (XY file open) - - cFile f2; - if (f2.Open(Printf("Chunk_%d_%d_XZ.raw", a_ChunkX, a_ChunkZ), cFile::fmWrite)) - { - for (int y = 0; y < cChunkDef::Height; y++) - { - for (int z = 0; z < cChunkDef::Width; z++) - { - int idx = y * 17 * 17 + z * 17; - unsigned char buf[16]; - for (int x = 0; x < cChunkDef::Width; x++) - { - buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 128 * m_Noise[idx++])))); - } - f2.Write(buf, 16); - } // for z - } // for y - } // if (XZ file open) - */ -} - - - - - -void cNoise3DComposable::GenHeightMap(int a_ChunkX, int a_ChunkZ, cChunkDef::HeightMap & a_HeightMap) -{ - GenerateNoiseArrayIfNeeded(a_ChunkX, a_ChunkZ); - - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int x = 0; x < cChunkDef::Width; x++) - { - cChunkDef::SetHeight(a_HeightMap, x, z, m_SeaLevel); - for (int y = cChunkDef::Height - 1; y > m_SeaLevel; y--) - { - if (m_NoiseArray[y * 17 * 17 + z * 17 + x] <= m_AirThreshold) - { - cChunkDef::SetHeight(a_HeightMap, x, z, y); - break; - } - } // for y - } // for x - } // for z -} - - - - - -void cNoise3DComposable::ComposeTerrain(cChunkDesc & a_ChunkDesc) -{ - GenerateNoiseArrayIfNeeded(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ()); - - a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0); - - // Make basic terrain composition: - for (int z = 0; z < cChunkDef::Width; z++) - { - for (int x = 0; x < cChunkDef::Width; x++) - { - int LastAir = a_ChunkDesc.GetHeight(x, z) + 1; - bool HasHadWater = false; - for (int y = LastAir; y < m_SeaLevel; y++) - { - a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER); - } - for (int y = LastAir - 1; y > 0; y--) - { - if (m_NoiseArray[x + 17 * z + 17 * 17 * y] > m_AirThreshold) - { - // "air" part - LastAir = y; - if (y < m_SeaLevel) - { - a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER); - HasHadWater = true; - } - continue; - } - // "ground" part: - if (LastAir - y > 4) - { - a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STONE); - continue; - } - if (HasHadWater) - { - a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_SAND); - } - else - { - a_ChunkDesc.SetBlockType(x, y, z, (LastAir == y + 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT); - } - } // for y - a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK); - } // for x - } // for z -} - - - - |