diff options
Diffstat (limited to 'compile.sh')
| -rwxr-xr-x | compile.sh | 93 |
1 files changed, 46 insertions, 47 deletions
diff --git a/compile.sh b/compile.sh index 5626227d5..8c0380da5 100755 --- a/compile.sh +++ b/compile.sh @@ -4,7 +4,7 @@ set -e # Global variables: -# CHOICE_BUILDTYPE - Either "Normal" or "Debug". +# CHOICE_BUILDTYPE - Either "Release" or "Debug". # CHOICE_THREADS - A numerical value, the amount of threads to be used for the make command. # CHOICE_BRANCH - The branch to use. Currently locked on "master". # STATE_INTERACTIVE - 1 If we're running interactively. 0 otherwise. @@ -13,6 +13,7 @@ set -e # Constants: DEFAULT_BUILDTYPE="Release" # Other options: "Debug" DEFAULT_BRANCH="master" # Other options: None currently +DEFAULT_THREADS=1 # Constants not modifiable through command line: UPSTREAM_REPO="origin" @@ -54,8 +55,8 @@ errorArguments () echo "options:" echo " -m The compilation mode. Either \"Release\" or \"Debug\". Defaults to \"$DEFAULT_BUILDTYPE\"" echo ' -t The number of threads to use for compiling' - echo " If unspecified, at most $MAX_DEFAULT_THREADS threads are used. The special value CORES attempts to set the number of" - echo ' threads to the number of computer cores.' + echo " If unspecified, a default of $DEFAULT_THREADS threads is used. The special value AUTO attempts to set the number of" + echo ' compilation threads equal to the number of CPU threads.' echo ' -b The branch to compile. (Currently unused and pinned to MASTER)' echo ' -n yes: Prevent interactive mode. Unnecessary in combination with other arguments.' echo ' Use without any other argument to build with the default settings.' @@ -65,7 +66,7 @@ errorArguments () echo " ./compile.sh" echo " ./compile.sh -m Debug" echo " ./compile.sh -m Release -t 2" - echo + echo echo "Return codes: (non 0 returns are accompanied by useful stderr info)" echo "0 - Success - Success! Code was updated and compiled" echo "1 - Compilation failed - cmake, make, or source code issue" @@ -129,10 +130,8 @@ while getopts ":m:t:b:d:n:" name; do ;; t) if [ ! -z "$CHOICE_THREADS" ]; then errorArguments; fi # Argument duplication. - if [ "$value" -gt 0 ] 2>/dev/null; then # If a positive integer. + if [ "$value" -gt 0 ] 2>/dev/null || [ "$value" = "AUTO" ]; then # If a positive integer or the special value "AUTO". CHOICE_THREADS="$value" - elif [ "$value" = "CORES" ]; then - CHOICE_THREADS="CORES" else errorArguments fi @@ -147,7 +146,7 @@ while getopts ":m:t:b:d:n:" name; do DRY_RUN="yes" ;; n) - if [ "$dummy" = "1" ]; then errorArguments; fi # Argument duplication. + if [ "$dummy" = "1" ]; then errorArguments; fi # Argument duplication. dummy=1 # we just want to disable interactive mode, passing an argument already did this. No need to do anything. ;; *) @@ -177,7 +176,7 @@ elif [ -d cuberite ]; then # If there's a directory named "cuberite"... else errorOther "A directory is named 'cuberite' which has no Cuberite assets exists. Please run the script elsewhere or move/delete that directory." fi - + fi if [ $STATE_NEW -eq 0 ]; then @@ -257,23 +256,23 @@ doDependencyCheck() # apt-get guide. apt-get --help > /dev/null 2> /dev/null && \ - missingDepsExit "sudo apt-get install$MISSING_PACKAGES" + missingDepsExit "apt-get install$MISSING_PACKAGES" - # yum guide. - yum --help > /dev/null 2> /dev/null && \ - missingDepsExit "sudo yum install$MISSING_PACKAGES" + # dnf guide. + dnf --help > /dev/null 2> /dev/null && \ + missingDepsExit "dnf install$MISSING_PACKAGES" # zypper guide. zypper --help > /dev/null 2> /dev/null && \ - missingDepsExit "sudo zypper install$MISSING_PACKAGES" + missingDepsExit "zypper install$MISSING_PACKAGES" # pacman guide. pacman --help > /dev/null 2> /dev/null && \ - missingDepsExit "sudo pacman -S$MISSING_PACKAGES" + missingDepsExit "pacman -S$MISSING_PACKAGES" # urpmi guide. urpmi --help > /dev/null 2> /dev/null && \ - missingDepsExit "sudo urpmi$MISSING_PACKAGES" + missingDepsExit "urpmi$MISSING_PACKAGES" missingDepsExit "" fi @@ -336,7 +335,7 @@ if [ $STATE_INTERACTIVE -eq 1 ]; then Generates the fastest build. * (D)Debug: Compiles in debug mode. - Makes your console and crashes more verbose. + Makes your console and crashes more verbose. A bit slower than Release mode. If you plan to help development by reporting bugs, this is preferred. @@ -351,14 +350,11 @@ if [ $STATE_INTERACTIVE -eq 1 ]; then r|N) CHOICE_BUILDTYPE="Release" ;; - *) - errorInput - ;; esac fi if [ -z "$CHOICE_BUILDTYPE" ]; then # No buildtype specified. - CHOICE_BUILDTYPE="$DEFAULT_BUILDTYPE" + CHOICE_BUILDTYPE="$DEFAULT_BUILDTYPE" fi @@ -366,44 +362,47 @@ fi -numberOfCores() +numberOfThreads() { - KERNEL=$(uname -s) + KERNEL=`uname -s` if [ "$KERNEL" = "Linux" ] || [ "$KERNEL" = "Darwin" ]; then - echo $(getconf _NPROCESSORS_ONLN) + echo `getconf _NPROCESSORS_ONLN` + elif [ "$KERNEL" = "FreeBSD" ]; then + echo `getconf NPROCESSORS_ONLN` else echo "unknown" fi } -CORE_COUNT=`numberOfCores` +CPU_THREAD_COUNT=`numberOfThreads` if [ $STATE_INTERACTIVE -eq 1 ]; then + echo "" echo "Choose the number of compilation threads." - if [ "$CORE_COUNT" = "unknown" ]; then - printf %s "Could not detect the number of cores. " - elif [ "$CORE_COUNT" -eq 1 ]; then - echo "You have 1 core." + if [ "$CPU_THREAD_COUNT" = "unknown" ]; then + echo "Could not detect the number of CPU threads." + elif [ "$CPU_THREAD_COUNT" -eq 1 ]; then + echo "You have 1 thread." else - echo "You have $CORE_COUNT cores." + echo "You have $CPU_THREAD_COUNT CPU threads." fi - - echo "If you have enough RAM, it is wise to choose a number as high as your core count. " - echo "Otherwise choose lower. Raspberry Pis should choose 1. If in doubt, choose 1." - printf %s "Please enter the number of compilation threads to use (Default: 1): " + + echo "If you have enough RAM, it is wise to choose your CPU's thread count. " + echo "Otherwise choose lower. Old Raspberry Pis should choose 1. If in doubt, choose 1." + printf %s "Please enter the number of compilation threads to use (Default: $DEFAULT_THREADS): " read CHOICE_THREADS fi if [ -z "$CHOICE_THREADS" ] 2> /dev/null; then - CHOICE_THREADS=1 -elif [ "$CHOICE_THREADS" = "CORES" ] 2> /dev/null; then - if [ $CORE_COUNT = "unknown" ]; then - CHOICE_THREADS=1 - echo "WARNING: could not detect number of cores. Using 1 thread." >&2 + CHOICE_THREADS="$DEFAULT_THREADS" +elif [ "$CHOICE_THREADS" = "AUTO" ] 2> /dev/null; then + if [ $CPU_THREAD_COUNT = "unknown" ]; then + CHOICE_THREADS="$DEFAULT_THREADS" + echo "WARNING: could not detect number of threads. Using the default ($DEFAULT_THREADS) ." >&2 else - CHOICE_THREADS="$CORE_COUNT" + CHOICE_THREADS="$CPU_THREAD_COUNT" fi elif [ "$CHOICE_THREADS" -lt 0 ] 2> /dev/null; then errorInput @@ -418,22 +417,22 @@ else previousCompilation="Detected. This should make fetching and compiling faster." fi -CORE_WARNING="" -if [ "$CORE_COUNT" != "unknown" ] && [ "$CORE_COUNT" -lt "$CHOICE_THREADS" ]; then - CORE_WARNING=" - Warning: More threads than cores." +THREAD_WARNING="" +if [ "$CPU_THREAD_COUNT" != "unknown" ] && [ "$CPU_THREAD_COUNT" -lt "$CHOICE_THREADS" ]; then + THREAD_WARNING=" - Warning: More threads assigned than there are CPU threads." fi echo "" echoInt "#### Settings Summary ####" echo "Build Type: " "$CHOICE_BUILDTYPE" echo "Branch: " "$CHOICE_BRANCH" "(Currently the only choice)" -echo "Compilation threads: " "$CHOICE_THREADS$CORE_WARNING" -echo "Cores: " "$CORE_COUNT" +echo "Compilation threads: " "$CHOICE_THREADS$THREAD_WARNING" +echo "CPU Threads: " "$CPU_THREAD_COUNT" echo "Previous compilation: " "$previousCompilation" echo "Upstream Link: " "$UPSTREAM_LINK" echo "Upstream Repo: " "$UPSTREAM_REPO" -if [ "$DRY_RUN" = "yes" ]; then +if [ "$DRY_RUN" = "yes" ]; then echo "This is a dry run. Exiting now." exit 0; fi @@ -509,7 +508,7 @@ fi cd .. echo " You can always update Cuberite by executing: -`pwd`/compile.sh +$PWD/compile.sh Enjoy :)" exit 0 |