7 files changed, 193 insertions, 74 deletions

diff --git a/MCServer/Plugins/@EnableMobDebug.lua b/MCServer/Plugins/@EnableMobDebug.lua
deleted file mode 100644
index 48d4c36b7..000000000
--- a/MCServer/Plugins/@EnableMobDebug.lua
+++ /dev/null
@@ -1,29 +0,0 @@
-
--- @EnableMobDebug.lua
-
--- Enables the MobDebug debugger, used by ZeroBrane Studio, for a plugin
--- Needs to be named with a @ at the start so that it's loaded as the first file of the plugin
-
---[[
-Usage:
-Copy this file to your plugin's folder when you want to debug that plugin
-You should neither check this file into the plugin's version control system,
-nor distribute it in the final release.
---]]
-
-
-
-
-
--- Try to load the debugger, be silent about failures:
-local IsSuccess, MobDebug = pcall(require, "mobdebug")
-if (IsSuccess) then
-	MobDebug.start()
-	
-	-- The debugger will automatically put a breakpoint on this line, use this opportunity to set more breakpoints in your code
-	LOG(cPluginManager:GetCurrentPlugin():GetName() .. ": MobDebug enabled")
-end
-
-
-
-
diff --git a/MCServer/Plugins/APIDump/APIDesc.lua b/MCServer/Plugins/APIDump/APIDesc.lua
index 28dffc1b6..c5599b212 100644
--- a/MCServer/Plugins/APIDump/APIDesc.lua
+++ b/MCServer/Plugins/APIDump/APIDesc.lua
@@ -114,7 +114,7 @@ g_APIDesc =
 				GetBlockSkyLight = { Params = "BlockX, BlockY, BlockZ", Return = "NIBBLETYPE", Notes = "Returns the skylight at the specified absolute coords" },
 				GetBlockType = { Params = "BlockX, BlockY, BlockZ", Return = "BLOCKTYPE", Notes = "Returns the block type at the specified absolute coords" },
 				GetBlockTypeMeta = { Params = "BlockX, BlockY, BlockZ", Return = "BLOCKTYPE, NIBBLETYPE", Notes = "Returns the block type and meta at the specified absolute coords" },
-				GetDataTypes = { Params = "", Return = "number", Notes = "Returns the mask of datatypes that the objectis currently holding" },
+				GetDataTypes = { Params = "", Return = "number", Notes = "Returns the mask of datatypes that the object is currently holding" },
 				GetOrigin = { Params = "", Return = "OriginX, OriginY, OriginZ", Notes = "Returns the origin coords of where the area was read from." },
 				GetOriginX = { Params = "", Return = "number", Notes = "Returns the origin x-coord" },
 				GetOriginY = { Params = "", Return = "number", Notes = "Returns the origin y-coord" },
@@ -129,6 +129,7 @@ g_APIDesc =
 				GetSizeY = { Params = "", Return = "number", Notes = "Returns the size of the held data in the y-axis" },
 				GetSizeZ = { Params = "", Return = "number", Notes = "Returns the size of the held data in the z-axis" },
 				GetVolume = { Params = "", Return = "number", Notes = "Returns the volume of the area - the total number of blocks stored within." },
+				GetWEOffset = { Params = "", Return = "{{Vector3i}}", Notes = "Returns the WE offset, a data value sometimes stored in the schematic files. MCServer doesn't use this value, but provides access to it using this method. The default is {0, 0, 0}."},
 				HasBlockLights = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include blocklight" },
 				HasBlockMetas = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include block metas" },
 				HasBlockSkyLights = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include skylight" },
@@ -178,6 +179,11 @@ g_APIDesc =
 				SetRelBlockSkyLight = { Params = "RelBlockX, RelBlockY, RelBlockZ, SkyLight", Return = "", Notes = "Sets the skylight at the specified relative coords" },
 				SetRelBlockType = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockType", Return = "", Notes = "Sets the block type at the specified relative coords" },
 				SetRelBlockTypeMeta = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockType, BlockMeta", Return = "", Notes = "Sets the block type and meta at the specified relative coords" },
+				SetWEOffset =
+				{
+					{ Params = "{{Vector3i|Offset}}", Return = "", Notes = "Sets the WE offset, a data value sometimes stored in the schematic files. Mostly used for WorldEdit. MCServer doesn't use this value, but provides access to it using this method." },
+					{ Params = "OffsetX, OffsetY, OffsetZ", Return = "", Notes = "Sets the WE offset, a data value sometimes stored in the schematic files. Mostly used for WorldEdit. MCServer doesn't use this value, but provides access to it using this method." },
+				},
 				Write =
 				{
 					{ Params = "World, {{Vector3i|MinPoint}}, DataTypes", Return = "bool", Notes = "Writes the area into World at the specified coords, returns true if successful" },
@@ -417,6 +423,7 @@ g_APIDesc =
 				SetUseDefaultFinish       = { Params = "bool", Return = "", Notes = "Sets the chunk to use default finishers or not" },
 				SetUseDefaultHeight       = { Params = "bool", Return = "", Notes = "Sets the chunk to use default height generator or not" },
 				SetUseDefaultStructures   = { Params = "bool", Return = "", Notes = "Sets the chunk to use default structures or not" },
+				UpdateHeightmap           = { Params = "",     Return = "", Notes = "Updates the heightmap to match current contents. The plugins should do that if they modify the contents and don't modify the heightmap accordingly; MCServer expects (and checks in Debug mode) that the heightmap matches the contents when the cChunkDesc is returned from a plugin." },
 				WriteBlockArea            = { Params = "{{cBlockArea|BlockArea}}, MinRelX, MinRelY, MinRelZ", Return = "", Notes = "Writes data from the block area into the chunk" },
 			},
 			AdditionalInfo =
@@ -466,6 +473,7 @@ end
 
 			Functions =
 			{
+				GetLocale = { Params = "", Return = "Locale", Notes = "Returns the locale string that the client sends as part of the protocol handshake. Can be used to provide localized strings." },
 				GetPing = { Params = "", Return = "number", Notes = "Returns the ping time, in ms" },
 				GetPlayer = { Params = "", Return = "{{cPlayer|cPlayer}}", Notes = "Returns the player object connected to this client. Note that this may be nil, for example if the player object is not yet spawned." },
 				GetUniqueID = { Params = "", Return = "number", Notes = "Returns the UniqueID of the client used to identify the client in the server" },
@@ -474,6 +482,7 @@ end
 				HasPluginChannel = { Params = "ChannelName", Return = "bool", Notes = "Returns true if the client has registered to receive messages on the specified plugin channel." },
 				Kick = { Params = "Reason", Return = "", Notes = "Kicks the user with the specified reason" },
 				SendPluginMessage = { Params = "Channel, Message", Return = "", Notes = "Sends the plugin message on the specified channel." },
+				SetLocale = { Params = "Locale", Return = "", Notes = "Sets the locale that MCServer keeps on record. Initially the locale is initialized in protocol handshake, this function allows plugins to override the stored value (but only server-side and only until the user disconnects)." },
 				SetUsername = { Params = "Name", Return = "", Notes = "Sets the username" },
 				SetViewDistance = { Params = "ViewDistance", Return = "", Notes = "Sets the viewdistance (number of chunks loaded for the player in each direction)" },
 				SendBlockChange = { Params = "BlockX, BlockY, BlockZ, BlockType, BlockMeta", Return = "", Notes = "Sends a BlockChange packet to the client. This can be used to create fake blocks only for that player." },
@@ -877,7 +886,6 @@ cFile:Delete("/usr/bin/virus.exe");
 				SetColor = { Return = "" },
 				GetColor = { Return = "string" },
 				AddCommand = { Return = "" },
-				HasCommand = { Return = "bool" },
 				AddPermission = { Return = "" },
 				InheritFrom = { Return = "" },
 			},
@@ -1144,7 +1152,6 @@ These ItemGrids are available in the API and can be manipulated by the plugins,
 				IsEnchantable = { Params = "", Return = "bool", Notes = "Returns true if the item is enchantable" },
 				IsFullStack = { Params = "", Return = "bool", Notes = "Returns true if the item is stacked up to its maximum stacking" },
 				IsSameType = { Params = "cItem", Return = "bool", Notes = "Returns true if the item in the parameter is of the same ItemType as the one stored in the object. This is true even if the two items have different enchantments" },
-				IsStackableWith = { Params = "cItem", Return = "bool", Notes = "Returns true if the item in the parameter is stackable with the one stored in the object. Two items with different enchantments cannot be stacked" },
 				IsBothNameAndLoreEmpty = { Params = "", Return = "bool", Notes = "Returns if both the custom name and lore are not set." },
 				IsCustomNameEmpty = { Params = "", Return = "bool", Notes = "Returns if the custom name of the cItem is empty." },
 				IsLoreEmpty = { Params = "", Return = "", Notes = "Returns if the lore of the cItem is empty." },
@@ -1650,7 +1657,6 @@ a_Player:OpenWindow(Window);
 				AddToGroup = { Params = "GroupName", Return = "", Notes = "Temporarily adds the player to the specified group. The assignment is lost when the player disconnects." },
 				CalcLevelFromXp = { Params = "XPAmount", Return = "number", Notes = "(STATIC) Returns the level which is reached with the specified amount of XP. Inverse of XpForLevel()." },
 				CanFly = { Return = "bool", Notes = "Returns if the player is able to fly." },
-				CanUseCommand = { Params = "Command", Return = "bool", Notes = "Returns true if the player is allowed to use the specified command." },
 				CloseWindow = { Params = "[CanRefuse]", Return = "", Notes = "Closes the currently open UI window. If CanRefuse is true (default), the window may refuse the closing." },
 				CloseWindowIfID = { Params = "WindowID, [CanRefuse]", Return = "", Notes = "Closes the currently open UI window if its ID matches the given ID. If CanRefuse is true (default), the window may refuse the closing." },
 				DeltaExperience = { Params = "DeltaXP", Return = "", Notes = "Adds or removes XP from the current XP amount. Won't allow XP to go negative. Returns the new experience, -1 on error (XP overflow)." },
@@ -1727,7 +1733,6 @@ a_Player:OpenWindow(Window);
 				SetSprint = { Params = "IsSprinting", Return = "", Notes = "Sets whether the player is sprinting or not." },
 				SetSprintingMaxSpeed = { Params = "SprintingMaxSpeed", Return = "", Notes = "Sets the sprinting maximum speed (as reported by the 1.6.1+ protocols)" },
 				SetVisible = { Params = "IsVisible", Return = "", Notes = "Sets the player visibility to other players" },
-				TossItem = { Params = "DraggedItem, [Amount], [CreateType], [CreateDamage]", Return = "", Notes = "FIXME: This function will be rewritten, avoid it. It tosses an item, either from the inventory, dragged in hand (while in UI window) or a newly created one." },
 				XpForLevel = { Params = "XPLevel", Return = "number", Notes = "(STATIC) Returns the total amount of XP needed for the specified XP level. Inverse of CalcLevelFromXp()." },
 			},
 			Constants =
@@ -1789,13 +1794,13 @@ cPluginManager.AddHook(cPluginManager.HOOK_CHAT, OnChatMessage);
 				},
 				BindCommand =
 				{
-					{ Params = "Command, Permission, Callback, HelpString", Return = "", Notes = "(STATIC) Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display." },
-					{ Params = "Command, Permission, Callback, HelpString", Return = "", Notes = "Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display." },
+					{ Params = "Command, Permission, Callback, HelpString", Return = "[bool]", Notes = "(STATIC) Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display. Returns true if successful, logs to console and returns no value on error." },
+					{ Params = "Command, Permission, Callback, HelpString", Return = "[bool]", Notes = "Binds an in-game command with the specified callback function, permission and help string. By common convention, providing an empty string for HelpString will hide the command from the /help display. Returns true if successful, logs to console and returns no value on error." },
 				},
 				BindConsoleCommand =
 				{
-					{ Params = "Command, Callback, HelpString", Return = "", Notes = "(STATIC) Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command." },
-					{ Params = "Command, Callback, HelpString", Return = "", Notes = "Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command." },
+					{ Params = "Command, Callback, HelpString", Return = "[bool]", Notes = "(STATIC) Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command. Returns true if successful, logs to console and returns no value on error." },
+					{ Params = "Command, Callback, HelpString", Return = "[bool]", Notes = "Binds a console command with the specified callback function and help string. By common convention, providing an empty string for HelpString will hide the command from the \"help\" console command. Returns true if successful, logs to console and returns no value on error." },
 				},
 				CallPlugin = { Params = "PluginName, FunctionName, [FunctionArgs...]", Return = "[FunctionRets]", Notes = "(STATIC) Calls the specified function in the specified plugin, passing all the given arguments to it. If it succeeds, it returns all the values returned by that function. If it fails, returns no value at all. Note that only strings, numbers, bools, nils and classes can be used for parameters and return values; tables and functions cannot be copied across plugins." },
 				DisablePlugin = { Params = "PluginName", Return = "bool", Notes = "Disables a plugin specified by its name. Returns true if the plugin was disabled, false if it wasn't found or wasn't active." },
@@ -2624,7 +2629,8 @@ end
 			]],
 			Functions =
 			{
-				AddFaceDirection = {Params = "BlockX, BlockY, BlockZ, BlockFace, [IsInverse]", Return = "BlockX, BlockY, BlockZ", Notes = "Returns the coords of a block adjacent to the specified block through the specified {{Globals#BlockFace|face}}"},
+				AddFaceDirection = {Params = "BlockX, BlockY, BlockZ, BlockFace, [IsInverse]", Return = "BlockX, BlockY, BlockZ", Notes = "Returns the coords of a block adjacent to the specified block through the specified {{Globals#BlockFaces|face}}"},
+				BlockFaceToString = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "string", Notes = "Returns the string representation of the {{Globals#BlockFaces|eBlockFace}} constant. Uses the axis-direction-based names, such as BLOCK_FACE_XP." },
 				BlockStringToType = {Params = "BlockTypeString", Return = "BLOCKTYPE", Notes = "Returns the block type parsed from the given string"},
 				ClickActionToString = {Params = "{{Globals#ClickAction|ClickAction}}", Return = "string", Notes = "Returns a string description of the ClickAction enumerated value"},
 				DamageTypeToString = {Params = "{{Globals#DamageType|DamageType}}", Return = "string", Notes = "Converts the {{Globals#DamageType|DamageType}} enumerated value to a string representation "},
@@ -2643,9 +2649,12 @@ end
 				LOGINFO = {Params = "string", Notes = "Logs a text into the server console using 'info' severity (yellow text)"},
 				LOGWARN = {Params = "string", Notes = "Logs a text into the server console using 'warning' severity (red text); OBSOLETE, use LOGWARNING() instead"},
 				LOGWARNING = {Params = "string", Notes = "Logs a text into the server console using 'warning' severity (red text)"},
+				MirrorBlockFaceY = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "{{Globals#BlockFaces|eBlockFace}}", Notes = "Returns the {{Globals#BlockFaces|eBlockFace}} that corresponds to the given {{Globals#BlockFaces|eBlockFace}} after mirroring it around the Y axis (or rotating 180 degrees around it)." },
 				NoCaseCompare = {Params = "string, string", Return = "number", Notes = "Case-insensitive string comparison; returns 0 if the strings are the same"},
 				NormalizeAngleDegrees = { Params = "AngleDegrees", Return = "AngleDegrees", Notes = "Returns the angle, wrapped into the [-180, +180) range." },
 				ReplaceString = {Params = "full-string, to-be-replaced-string, to-replace-string", Notes = "Replaces *each* occurence of to-be-replaced-string in full-string with to-replace-string"},
+				RotateBlockFaceCCW = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "{{Globals#BlockFaces|eBlockFace}}", Notes = "Returns the {{Globals#BlockFaces|eBlockFace}} that corresponds to the given {{Globals#BlockFaces|eBlockFace}} after rotating it around the Y axis 90 degrees counter-clockwise." },
+				RotateBlockFaceCW = { Params = "{{Globals#BlockFaces|eBlockFace}}", Return = "{{Globals#BlockFaces|eBlockFace}}", Notes = "Returns the {{Globals#BlockFaces|eBlockFace}} that corresponds to the given {{Globals#BlockFaces|eBlockFace}} after rotating it around the Y axis 90 degrees clockwise." },
 				StringSplit = {Params = "string, SeperatorsString", Return = "array table of strings", Notes = "Seperates string into multiple by splitting every time any of the characters in SeperatorsString is encountered."},
 				StringSplitAndTrim = {Params = "string, SeperatorsString", Return = "array table of strings", Notes = "Seperates string into multiple by splitting every time any of the characters in SeperatorsString is encountered. Each of the separate strings is trimmed (whitespace removed from the beginning and end of the string)"},
 				StringToBiome = {Params = "string", Return = "{{Globals#BiomeTypes|BiomeType}}", Notes = "Converts a string representation to a {{Globals#BiomeTypes|BiomeType}} enumerated value"},
@@ -2692,7 +2701,13 @@ end
 					Include = "^BLOCK_FACE_.*",
 					TextBefore = [[
 						These constants are used to describe individual faces of the block. They are used when the
-						client is interacting with a block, or when the {{cLineBlockTracer}} hits a block, etc.
+						client is interacting with a block in the {{OnPlayerBreakingBlock|HOOK_PLAYER_BREAKING_BLOCK}},
+						{{OnPlayerBrokenBlock|HOOK_PLAYER_BROKEN_BLOCK}}, {{OnPlayerLeftClick|HOOK_PLAYER_LEFT_CLICK}},
+						{{OnPlayerPlacedBlock|HOOK_PLAYER_PLACED_BLOCK}}, {{OnPlayerPlacingBlock|HOOK_PLAYER_PLACING_BLOCK}},
+						{{OnPlayerRightClick|HOOK_PLAYER_RIGHT_CLICK}}, {{OnPlayerUsedBlock|HOOK_PLAYER_USED_BLOCK}},
+						{{OnPlayerUsedItem|HOOK_PLAYER_USED_ITEM}}, {{OnPlayerUsingBlock|HOOK_PLAYER_USING_BLOCK}},
+						and {{OnPlayerUsingItem|HOOK_PLAYER_USING_ITEM}} hooks, or when the {{cLineBlockTracer}} hits a
+						block, etc.
 					]],
 				},
 				ClickAction =
diff --git a/MCServer/Plugins/APIDump/Classes/Geometry.lua b/MCServer/Plugins/APIDump/Classes/Geometry.lua
index e83d6e4b1..9887bfb89 100644
--- a/MCServer/Plugins/APIDump/Classes/Geometry.lua
+++ b/MCServer/Plugins/APIDump/Classes/Geometry.lua
@@ -53,7 +53,7 @@ return
 	{
 		Desc = [[
 			cCuboid offers some native support for integral-boundary cuboids. A cuboid internally consists of
-			two {{Vector3i}}s. By default the cuboid doesn't make any assumptions about the defining points,
+			two {{Vector3i}}-s. By default the cuboid doesn't make any assumptions about the defining points,
 			but for most of the operations in the cCuboid class, the p1 member variable is expected to be the
 			minima and the p2 variable the maxima. The Sort() function guarantees this condition.</p>
 			<p>
@@ -63,12 +63,17 @@ return
 		{
 			constructor =
 			{
-				{ Params = "OtheCuboid", Return = "cCuboid", Notes = "Creates a new Cuboid object as a copy of OtherCuboid" },
+				{ Params = "", Return = "cCuboid", Notes = "Creates a new Cuboid object with all-zero coords" },
+				{ Params = "OtherCuboid", Return = "cCuboid", Notes = "Creates a new Cuboid object as a copy of OtherCuboid" },
 				{ Params = "{{Vector3i|Point1}}, {{Vector3i|Point2}}", Return = "cCuboid", Notes = "Creates a new Cuboid object with the specified points as its corners." },
 				{ Params = "X, Y, Z", Return = "cCuboid", Notes = "Creates a new Cuboid object with the specified point as both its corners (the cuboid has a size of 1 in each direction)." },
 				{ Params = "X1, Y1, Z1, X2, Y2, Z2", Return = "cCuboid", Notes = "Creates a new Cuboid object with the specified points as its corners." },
 			},
-			Assign = { Params = "X1, Y1, Z1, X2, Y2, Z2", Return = "", Notes = "Assigns all the coords stored in the cuboid. Sort-state is ignored." },
+			Assign =
+			{
+				{ Params = "SrcCuboid", Return = "", Notes = "Copies all the coords from the src cuboid to this cuboid. Sort-state is ignored." },
+				{ Params = "X1, Y1, Z1, X2, Y2, Z2", Return = "", Notes = "Assigns all the coords to the specified values. Sort-state is ignored." },
+			},
 			ClampX = { Params = "MinX, MaxX", Return = "", Notes = "Clamps both X coords into the range provided. Sortedness-agnostic." },
 			ClampY = { Params = "MinY, MaxY", Return = "", Notes = "Clamps both Y coords into the range provided. Sortedness-agnostic." },
 			ClampZ = { Params = "MinZ, MaxZ", Return = "", Notes = "Clamps both Z coords into the range provided. Sortedness-agnostic." },
@@ -76,6 +81,7 @@ return
 			DifY = { Params = "", Return = "number", Notes = "Returns the difference between the two Y coords (Y-size minus 1). Assumes sorted." },
 			DifZ = { Params = "", Return = "number", Notes = "Returns the difference between the two Z coords (Z-size minus 1). Assumes sorted." },
 			DoesIntersect = { Params = "OtherCuboid", Return = "bool", Notes = "Returns true if this cuboid has at least one voxel in common with OtherCuboid. Note that edges are considered inclusive. Assumes both sorted." },
+			Engulf = { Params = "{{Vector3i|Point}}", Return = "", Notes = "If needed, expands the cuboid to include the specified point. Doesn't shrink. Assumes sorted. " },
 			Expand = { Params = "SubMinX, AddMaxX, SubMinY, AddMaxY, SubMinZ, AddMaxZ", Return = "", Notes = "Expands the cuboid by the specified amount in each direction. Works on unsorted cuboids as well. NOTE: this function doesn't check for underflows." },
 			GetVolume = { Params = "", Return = "number", Notes = "Returns the volume of the cuboid, in blocks. Note that the volume considers both coords inclusive. Works on unsorted cuboids, too." },
 			IsCompletelyInside = { Params = "OuterCuboid", Return = "bool", Notes = "Returns true if this cuboid is completely inside (in all directions) in OuterCuboid. Assumes both sorted." },
@@ -308,6 +314,7 @@ end
 			},
 			Equals = { Params = "Vector3i", Return = "bool", Notes = "Returns true if this vector is exactly the same as the specified vector." },
 			Length = { Params = "", Return = "number", Notes = "Returns the (euclidean) length of this vector." },
+			Move = { Params = "X, Y, Z", Return = "", Notes = "Moves the vector by the specified amount in each axis direction." },
 			Set = { Params = "x, y, z", Return = "", Notes = "Sets all the coords of the vector at once" },
 			SqrLength = { Params = "", Return = "number", Notes = "Returns the (euclidean) length of this vector, squared. This operation is slightly less computationally expensive than Length(), while it conserves some properties of Length(), such as comparison." },
 		},
diff --git a/MCServer/Plugins/APIDump/main_APIDump.lua b/MCServer/Plugins/APIDump/main_APIDump.lua
index bd509dcb6..4ed692b52 100644
--- a/MCServer/Plugins/APIDump/main_APIDump.lua
+++ b/MCServer/Plugins/APIDump/main_APIDump.lua
@@ -9,22 +9,6 @@
 -- Global variables:
 g_Plugin = nil;
 g_PluginFolder = "";
-g_TrackedPages = {};  -- List of tracked pages, to be checked later whether they exist. Each item is an array of referring pagenames.
-g_Stats =  -- Statistics about the documentation
-{
-	NumTotalClasses = 0,
-	NumUndocumentedClasses = 0,
-	NumTotalFunctions = 0,
-	NumUndocumentedFunctions = 0,
-	NumTotalConstants = 0,
-	NumUndocumentedConstants = 0,
-	NumTotalVariables = 0,
-	NumUndocumentedVariables = 0,
-	NumTotalHooks = 0,
-	NumUndocumentedHooks = 0,
-	NumTrackedLinks = 0,
-	NumInvalidLinks = 0,
-}
 
 
 
@@ -33,15 +17,35 @@ g_Stats =  -- Statistics about the documentation
 
 function Initialize(Plugin)
 	g_Plugin = Plugin;
-	
-	Plugin:SetName("APIDump");
-	Plugin:SetVersion(1);
+	g_PluginFolder = Plugin:GetLocalFolder();
 	
 	LOG("Initialising " .. Plugin:GetName() .. " v." .. Plugin:GetVersion())
 	
-	g_PluginFolder = Plugin:GetLocalFolder();
+	cPluginManager:BindConsoleCommand("api", HandleCmdApi, "Dumps the Lua API docs into the API/ subfolder")
+	g_Plugin:AddWebTab("APIDump", HandleWebAdminDump)
+	-- TODO: Add a WebAdmin tab that has a Dump button
+	return true
+end
+
+
+
+
+
+function HandleCmdApi(a_Split)
+	DumpApi()
+	return true
+end
+
+
+
+
+
+function DumpApi()
+	LOG("Dumping the API...")
 	
 	-- Load the API descriptions from the Classes and Hooks subfolders:
+	-- This needs to be done each time the command is invoked because the export modifies the tables' contents
+	dofile(g_PluginFolder .. "/APIDesc.lua")
 	if (g_APIDesc.Classes == nil) then
 		g_APIDesc.Classes = {};
 	end
@@ -51,6 +55,24 @@ function Initialize(Plugin)
 	LoadAPIFiles("/Classes/", g_APIDesc.Classes);
 	LoadAPIFiles("/Hooks/",   g_APIDesc.Hooks);
 
+	-- Reset the stats:
+	g_TrackedPages = {};  -- List of tracked pages, to be checked later whether they exist. Each item is an array of referring pagenames.
+	g_Stats =  -- Statistics about the documentation
+	{
+		NumTotalClasses = 0,
+		NumUndocumentedClasses = 0,
+		NumTotalFunctions = 0,
+		NumUndocumentedFunctions = 0,
+		NumTotalConstants = 0,
+		NumUndocumentedConstants = 0,
+		NumTotalVariables = 0,
+		NumUndocumentedVariables = 0,
+		NumTotalHooks = 0,
+		NumUndocumentedHooks = 0,
+		NumTrackedLinks = 0,
+		NumInvalidLinks = 0,
+	}
+	
 	-- dump all available API functions and objects:
 	-- DumpAPITxt();
 	
@@ -58,7 +80,6 @@ function Initialize(Plugin)
 	DumpAPIHtml();
 	
 	LOG("APIDump finished");
-	
 	return true
 end
 
@@ -67,6 +88,9 @@ end
 
 
 function LoadAPIFiles(a_Folder, a_DstTable)
+	assert(type(a_Folder) == "string")
+	assert(type(a_DstTable) == "table")
+	
 	local Folder = g_PluginFolder .. a_Folder;
 	for idx, fnam in ipairs(cFile:GetFolderContents(Folder)) do
 		local FileName = Folder .. fnam;
@@ -317,6 +341,11 @@ end
 function DumpAPIHtml()
 	LOG("Dumping all available functions and constants to API subfolder...");
 	
+	-- Create the output folder
+	if not(cFile:IsFolder("API")) then
+		cFile:CreateFolder("API");
+	end
+
 	LOG("Copying static files..");
 	cFile:CreateFolder("API/Static");
 	local localFolder = g_Plugin:GetLocalFolder();
@@ -366,11 +395,6 @@ function DumpAPIHtml()
 	ReadDescriptions(API);
 	ReadHooks(Hooks);
 	
-	-- Create the output folder
-	if not(cFile:IsFolder("API")) then
-		cFile:CreateFolder("API");
-	end
-
 	-- Create a "class index" file, write each class as a link to that file,
 	-- then dump class contents into class-specific file
 	LOG("Writing HTML files...");
@@ -1428,3 +1452,18 @@ end
 
 
 
+
+function HandleWebAdminDump(a_Request)
+	if (a_Request.PostParams["Dump"] ~= nil) then
+		DumpApi()
+	end
+	return
+	[[
+	<p>Pressing the button will generate the API dump on the server. Note that this can take some time.</p>
+	<form method="POST"><input type="submit" name="Dump" value="Dump the API"/></form>
+	]]
+end
+
+
+
+
diff --git a/MCServer/Plugins/Debuggers/Debuggers.lua b/MCServer/Plugins/Debuggers/Debuggers.lua
index f99c48242..fe3efa306 100644
--- a/MCServer/Plugins/Debuggers/Debuggers.lua
+++ b/MCServer/Plugins/Debuggers/Debuggers.lua
@@ -56,7 +56,8 @@ function Initialize(Plugin)
 	PM:BindCommand("/sched",   "debuggers", HandleSched,           "- Schedules a simple countdown using cWorld:ScheduleTask()");
 	PM:BindCommand("/cs",      "debuggers", HandleChunkStay,       "- Tests the ChunkStay Lua integration for the specified chunk coords");
 	PM:BindCommand("/compo",   "debuggers", HandleCompo,           "- Tests the cCompositeChat bindings")
-	PM:BindCommand("/sb",      "debuggers", HandleSetBiome,        "- Sets the biome around you to the specified one");
+	PM:BindCommand("/sb",      "debuggers", HandleSetBiome,        "- Sets the biome around you to the specified one")
+	PM:BindCommand("/wesel",   "debuggers", HandleWESel,           "- Expands the current WE selection by 1 block in X/Z")
 
 	Plugin:AddWebTab("Debuggers",  HandleRequest_Debuggers)
 	Plugin:AddWebTab("StressTest", HandleRequest_StressTest)
@@ -216,7 +217,7 @@ function TestBlockAreasString()
 		return
 	end
 	cFile:CreateFolder("schematics")
-	local f = io.open("schematics/StringTest.schematic", "w")
+	local f = io.open("schematics/StringTest.schematic", "wb")
 	f:write(Data)
 	f:close()
 	
@@ -229,7 +230,7 @@ function TestBlockAreasString()
 	BA2:Clear()
 	
 	-- Load another area from a string in that file:
-	f = io.open("schematics/StringTest.schematic", "r")
+	f = io.open("schematics/StringTest.schematic", "rb")
 	Data = f:read("*all")
 	if not(BA2:LoadFromSchematicString(Data)) then
 		LOG("Cannot load schematic from string")
@@ -1298,6 +1299,43 @@ end
 
 
 
+function HandleWESel(a_Split, a_Player)
+	-- Check if the selection is a cuboid:
+	local IsCuboid = cPluginManager:CallPlugin("WorldEdit", "IsPlayerSelectionCuboid")
+	if (IsCuboid == nil) then
+		a_Player:SendMessage(cCompositeChat():SetMessageType(mtFailure):AddTextPart("Cannot adjust selection, WorldEdit is not loaded"))
+		return true
+	elseif (IsCuboid == false) then
+		a_Player:SendMessage(cCompositeChat():SetMessageType(mtFailure):AddTextPart("Cannot adjust selection, the selection is not a cuboid"))
+		return true
+	end
+	
+	-- Get the selection:
+	local SelCuboid = cCuboid()
+	local IsSuccess = cPluginManager:CallPlugin("WorldEdit", "GetPlayerCuboidSelection", a_Player, SelCuboid)
+	if not(IsSuccess) then
+		a_Player:SendMessage(cCompositeChat():SetMessageType(mtFailure):AddTextPart("Cannot adjust selection, WorldEdit reported failure while getting current selection"))
+		return true
+	end
+	
+	-- Adjust the selection:
+	local NumBlocks = tonumber(a_Split[2] or "1") or 1
+	SelCuboid:Expand(NumBlocks, NumBlocks, 0, 0, NumBlocks, NumBlocks)
+	
+	-- Set the selection:
+	local IsSuccess = cPluginManager:CallPlugin("WorldEdit", "SetPlayerCuboidSelection", a_Player, SelCuboid)
+	if not(IsSuccess) then
+		a_Player:SendMessage(cCompositeChat():SetMessageType(mtFailure):AddTextPart("Cannot adjust selection, WorldEdit reported failure while setting new selection"))
+		return true
+	end
+	a_Player:SendMessage(cCompositeChat():SetMessageType(mtInformation):AddTextPart("Successfully adjusted the selection by " .. NumBlocks .. " block(s)"))
+	return true
+end
+
+
+
+
+
 function OnPlayerJoined(a_Player)
 	-- Test composite chat chaining:
 	a_Player:SendMessage(cCompositeChat()
diff --git a/MCServer/Plugins/DumpInfo/Init.lua b/MCServer/Plugins/DumpInfo/Init.lua
new file mode 100644
index 000000000..5d9c752b0
--- /dev/null
+++ b/MCServer/Plugins/DumpInfo/Init.lua
@@ -0,0 +1,49 @@
+function Initialize(a_Plugin)
+	a_Plugin:SetName("DumpInfo")
+	a_Plugin:SetVersion(1)
+	
+	-- Check if the infodump file exists.
+	if (not cFile:Exists("Plugins/InfoDump.lua")) then
+		LOGWARN("[DumpInfo] InfoDump.lua was not found.")
+		return false
+	end
+	
+	-- Add the webtab.
+	a_Plugin:AddWebTab("DumpPlugin", HandleDumpPluginRequest)
+	return true
+end
+
+
+
+
+
+function HandleDumpPluginRequest(a_Request)
+	local Content = ""
+	
+	-- Check if it already was requested to dump a plugin.
+	if (a_Request.PostParams["DumpInfo"] ~= nil) then
+		local F = loadfile("Plugins/InfoDump.lua")
+		F("Plugins/" .. a_Request.PostParams["DumpInfo"])
+	end
+	
+	Content = Content .. [[
+<table>
+<th colspan="2">DumpInfo</th>]]
+
+	-- Loop through each plugin that is found.
+	for PluginName, k in pairs(cPluginManager:Get():GetAllPlugins()) do
+		
+		-- Check if there is a file called 'Info.lua' or 'info.lua'
+		if (cFile:Exists("Plugins/" .. PluginName .. "/Info.lua")) then
+			Content = Content .. "<tr>"
+			Content = Content .. "<td>" .. PluginName .. "</td>"
+			Content = Content .. "<td> <form method='POST'> <input type='hidden' value='" .. PluginName .. "' name='DumpInfo'> <input type='submit' value='DumpInfo'> </form>"
+			Content = Content .. "</td>"
+		end
+	end
+	
+	Content = Content .. [[
+</table>]]
+
+	return Content
+end
diff --git a/MCServer/Plugins/InfoReg.lua b/MCServer/Plugins/InfoReg.lua
index 1cf68dbed..b3717884a 100644
--- a/MCServer/Plugins/InfoReg.lua
+++ b/MCServer/Plugins/InfoReg.lua
@@ -59,13 +59,13 @@ local function MultiCommandHandler(a_Split, a_Player, a_CmdString, a_CmdInfo, a_
 		return true;
 	end
 	
-	-- Check if the handler is valid:
+	-- If the handler is not valid, check the next sublevel:
 	if (Subcommand.Handler == nil) then
 		if (Subcommand.Subcommands == nil) then
 			LOG("Cannot find handler for command " .. a_CmdString .. " " .. Verb);
 			return false;
 		end
-		ListSubcommands(a_Player, Subcommand.Subcommands, a_CmdString .. " " .. Verb);
+		MultiCommandHandler(a_Split, a_Player, a_CmdString .. " " .. Verb, Subcommand, a_Level + 1);
 		return true;
 	end