From ba9a42aa7e10686de186636fe9fecbf8c4cc7c19 Mon Sep 17 00:00:00 2001 From: Tao Bao Date: Tue, 23 Jun 2015 23:23:33 -0700 Subject: recovery: Switch applypatch/ and updater/ to cpp. Mostly trivial changes to make cpp compiler happy. Change-Id: I69bd1d96fcccf506007f6144faf37e11cfba1270 --- updater/blockimg.c | 1994 ---------------------------------------------------- 1 file changed, 1994 deletions(-) delete mode 100644 updater/blockimg.c (limited to 'updater/blockimg.c') diff --git a/updater/blockimg.c b/updater/blockimg.c deleted file mode 100644 index a6a389507..000000000 --- a/updater/blockimg.c +++ /dev/null @@ -1,1994 +0,0 @@ -/* - * Copyright (C) 2014 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "applypatch/applypatch.h" -#include "edify/expr.h" -#include "mincrypt/sha.h" -#include "minzip/Hash.h" -#include "updater.h" - -#define BLOCKSIZE 4096 - -// Set this to 0 to interpret 'erase' transfers to mean do a -// BLKDISCARD ioctl (the normal behavior). Set to 1 to interpret -// erase to mean fill the region with zeroes. -#define DEBUG_ERASE 0 - -#ifndef BLKDISCARD -#define BLKDISCARD _IO(0x12,119) -#endif - -#define STASH_DIRECTORY_BASE "/cache/recovery" -#define STASH_DIRECTORY_MODE 0700 -#define STASH_FILE_MODE 0600 - -char* PrintSha1(const uint8_t* digest); - -typedef struct { - int count; - int size; - int pos[0]; -} RangeSet; - -#define RANGESET_MAX_POINTS \ - ((int)((INT_MAX / sizeof(int)) - sizeof(RangeSet))) - -static RangeSet* parse_range(char* text) { - char* save; - char* token; - int i, num; - long int val; - RangeSet* out = NULL; - size_t bufsize; - - if (!text) { - goto err; - } - - token = strtok_r(text, ",", &save); - - if (!token) { - goto err; - } - - val = strtol(token, NULL, 0); - - if (val < 2 || val > RANGESET_MAX_POINTS) { - goto err; - } else if (val % 2) { - goto err; // must be even - } - - num = (int) val; - bufsize = sizeof(RangeSet) + num * sizeof(int); - - out = malloc(bufsize); - - if (!out) { - fprintf(stderr, "failed to allocate range of %zu bytes\n", bufsize); - goto err; - } - - out->count = num / 2; - out->size = 0; - - for (i = 0; i < num; ++i) { - token = strtok_r(NULL, ",", &save); - - if (!token) { - goto err; - } - - val = strtol(token, NULL, 0); - - if (val < 0 || val > INT_MAX) { - goto err; - } - - out->pos[i] = (int) val; - - if (i % 2) { - if (out->pos[i - 1] >= out->pos[i]) { - goto err; // empty or negative range - } - - if (out->size > INT_MAX - out->pos[i]) { - goto err; // overflow - } - - out->size += out->pos[i]; - } else { - if (out->size < 0) { - goto err; - } - - out->size -= out->pos[i]; - } - } - - if (out->size <= 0) { - goto err; - } - - return out; - -err: - fprintf(stderr, "failed to parse range '%s'\n", text ? text : "NULL"); - exit(1); -} - -static int range_overlaps(RangeSet* r1, RangeSet* r2) { - int i, j, r1_0, r1_1, r2_0, r2_1; - - if (!r1 || !r2) { - return 0; - } - - for (i = 0; i < r1->count; ++i) { - r1_0 = r1->pos[i * 2]; - r1_1 = r1->pos[i * 2 + 1]; - - for (j = 0; j < r2->count; ++j) { - r2_0 = r2->pos[j * 2]; - r2_1 = r2->pos[j * 2 + 1]; - - if (!(r2_0 >= r1_1 || r1_0 >= r2_1)) { - return 1; - } - } - } - - return 0; -} - -static int read_all(int fd, uint8_t* data, size_t size) { - size_t so_far = 0; - while (so_far < size) { - ssize_t r = TEMP_FAILURE_RETRY(read(fd, data+so_far, size-so_far)); - if (r == -1) { - fprintf(stderr, "read failed: %s\n", strerror(errno)); - return -1; - } - so_far += r; - } - return 0; -} - -static int write_all(int fd, const uint8_t* data, size_t size) { - size_t written = 0; - while (written < size) { - ssize_t w = TEMP_FAILURE_RETRY(write(fd, data+written, size-written)); - if (w == -1) { - fprintf(stderr, "write failed: %s\n", strerror(errno)); - return -1; - } - written += w; - } - - if (fsync(fd) == -1) { - fprintf(stderr, "fsync failed: %s\n", strerror(errno)); - return -1; - } - - return 0; -} - -static bool check_lseek(int fd, off64_t offset, int whence) { - off64_t rc = TEMP_FAILURE_RETRY(lseek64(fd, offset, whence)); - if (rc == -1) { - fprintf(stderr, "lseek64 failed: %s\n", strerror(errno)); - return false; - } - return true; -} - -static void allocate(size_t size, uint8_t** buffer, size_t* buffer_alloc) { - // if the buffer's big enough, reuse it. - if (size <= *buffer_alloc) return; - - free(*buffer); - - *buffer = (uint8_t*) malloc(size); - if (*buffer == NULL) { - fprintf(stderr, "failed to allocate %zu bytes\n", size); - exit(1); - } - *buffer_alloc = size; -} - -typedef struct { - int fd; - RangeSet* tgt; - int p_block; - size_t p_remain; -} RangeSinkState; - -static ssize_t RangeSinkWrite(const uint8_t* data, ssize_t size, void* token) { - RangeSinkState* rss = (RangeSinkState*) token; - - if (rss->p_remain <= 0) { - fprintf(stderr, "range sink write overrun"); - return 0; - } - - ssize_t written = 0; - while (size > 0) { - size_t write_now = size; - - if (rss->p_remain < write_now) { - write_now = rss->p_remain; - } - - if (write_all(rss->fd, data, write_now) == -1) { - break; - } - - data += write_now; - size -= write_now; - - rss->p_remain -= write_now; - written += write_now; - - if (rss->p_remain == 0) { - // move to the next block - ++rss->p_block; - if (rss->p_block < rss->tgt->count) { - rss->p_remain = (rss->tgt->pos[rss->p_block * 2 + 1] - - rss->tgt->pos[rss->p_block * 2]) * BLOCKSIZE; - - if (!check_lseek(rss->fd, (off64_t)rss->tgt->pos[rss->p_block*2] * BLOCKSIZE, - SEEK_SET)) { - break; - } - } else { - // we can't write any more; return how many bytes have - // been written so far. - break; - } - } - } - - return written; -} - -// All of the data for all the 'new' transfers is contained in one -// file in the update package, concatenated together in the order in -// which transfers.list will need it. We want to stream it out of the -// archive (it's compressed) without writing it to a temp file, but we -// can't write each section until it's that transfer's turn to go. -// -// To achieve this, we expand the new data from the archive in a -// background thread, and block that threads 'receive uncompressed -// data' function until the main thread has reached a point where we -// want some new data to be written. We signal the background thread -// with the destination for the data and block the main thread, -// waiting for the background thread to complete writing that section. -// Then it signals the main thread to wake up and goes back to -// blocking waiting for a transfer. -// -// NewThreadInfo is the struct used to pass information back and forth -// between the two threads. When the main thread wants some data -// written, it sets rss to the destination location and signals the -// condition. When the background thread is done writing, it clears -// rss and signals the condition again. - -typedef struct { - ZipArchive* za; - const ZipEntry* entry; - - RangeSinkState* rss; - - pthread_mutex_t mu; - pthread_cond_t cv; -} NewThreadInfo; - -static bool receive_new_data(const unsigned char* data, int size, void* cookie) { - NewThreadInfo* nti = (NewThreadInfo*) cookie; - - while (size > 0) { - // Wait for nti->rss to be non-NULL, indicating some of this - // data is wanted. - pthread_mutex_lock(&nti->mu); - while (nti->rss == NULL) { - pthread_cond_wait(&nti->cv, &nti->mu); - } - pthread_mutex_unlock(&nti->mu); - - // At this point nti->rss is set, and we own it. The main - // thread is waiting for it to disappear from nti. - ssize_t written = RangeSinkWrite(data, size, nti->rss); - data += written; - size -= written; - - if (nti->rss->p_block == nti->rss->tgt->count) { - // we have written all the bytes desired by this rss. - - pthread_mutex_lock(&nti->mu); - nti->rss = NULL; - pthread_cond_broadcast(&nti->cv); - pthread_mutex_unlock(&nti->mu); - } - } - - return true; -} - -static void* unzip_new_data(void* cookie) { - NewThreadInfo* nti = (NewThreadInfo*) cookie; - mzProcessZipEntryContents(nti->za, nti->entry, receive_new_data, nti); - return NULL; -} - -static int ReadBlocks(RangeSet* src, uint8_t* buffer, int fd) { - int i; - size_t p = 0; - size_t size; - - if (!src || !buffer) { - return -1; - } - - for (i = 0; i < src->count; ++i) { - if (!check_lseek(fd, (off64_t) src->pos[i * 2] * BLOCKSIZE, SEEK_SET)) { - return -1; - } - - size = (src->pos[i * 2 + 1] - src->pos[i * 2]) * BLOCKSIZE; - - if (read_all(fd, buffer + p, size) == -1) { - return -1; - } - - p += size; - } - - return 0; -} - -static int WriteBlocks(RangeSet* tgt, uint8_t* buffer, int fd) { - int i; - size_t p = 0; - size_t size; - - if (!tgt || !buffer) { - return -1; - } - - for (i = 0; i < tgt->count; ++i) { - if (!check_lseek(fd, (off64_t) tgt->pos[i * 2] * BLOCKSIZE, SEEK_SET)) { - return -1; - } - - size = (tgt->pos[i * 2 + 1] - tgt->pos[i * 2]) * BLOCKSIZE; - - if (write_all(fd, buffer + p, size) == -1) { - return -1; - } - - p += size; - } - - return 0; -} - -// Do a source/target load for move/bsdiff/imgdiff in version 1. -// 'wordsave' is the save_ptr of a strtok_r()-in-progress. We expect -// to parse the remainder of the string as: -// -// -// -// The source range is loaded into the provided buffer, reallocating -// it to make it larger if necessary. The target ranges are returned -// in *tgt, if tgt is non-NULL. - -static int LoadSrcTgtVersion1(char** wordsave, RangeSet** tgt, int* src_blocks, - uint8_t** buffer, size_t* buffer_alloc, int fd) { - char* word; - int rc; - - word = strtok_r(NULL, " ", wordsave); - RangeSet* src = parse_range(word); - - if (tgt != NULL) { - word = strtok_r(NULL, " ", wordsave); - *tgt = parse_range(word); - } - - allocate(src->size * BLOCKSIZE, buffer, buffer_alloc); - rc = ReadBlocks(src, *buffer, fd); - *src_blocks = src->size; - - free(src); - return rc; -} - -static int VerifyBlocks(const char *expected, const uint8_t *buffer, - size_t blocks, int printerror) { - char* hexdigest = NULL; - int rc = -1; - uint8_t digest[SHA_DIGEST_SIZE]; - - if (!expected || !buffer) { - return rc; - } - - SHA_hash(buffer, blocks * BLOCKSIZE, digest); - hexdigest = PrintSha1(digest); - - if (hexdigest != NULL) { - rc = strcmp(expected, hexdigest); - - if (rc != 0 && printerror) { - fprintf(stderr, "failed to verify blocks (expected %s, read %s)\n", - expected, hexdigest); - } - - free(hexdigest); - } - - return rc; -} - -static char* GetStashFileName(const char* base, const char* id, const char* postfix) { - char* fn; - int len; - int res; - - if (base == NULL) { - return NULL; - } - - if (id == NULL) { - id = ""; - } - - if (postfix == NULL) { - postfix = ""; - } - - len = strlen(STASH_DIRECTORY_BASE) + 1 + strlen(base) + 1 + strlen(id) + strlen(postfix) + 1; - fn = malloc(len); - - if (fn == NULL) { - fprintf(stderr, "failed to malloc %d bytes for fn\n", len); - return NULL; - } - - res = snprintf(fn, len, STASH_DIRECTORY_BASE "/%s/%s%s", base, id, postfix); - - if (res < 0 || res >= len) { - fprintf(stderr, "failed to format file name (return value %d)\n", res); - free(fn); - return NULL; - } - - return fn; -} - -typedef void (*StashCallback)(const char*, void*); - -// Does a best effort enumeration of stash files. Ignores possible non-file -// items in the stash directory and continues despite of errors. Calls the -// 'callback' function for each file and passes 'data' to the function as a -// parameter. - -static void EnumerateStash(const char* dirname, StashCallback callback, void* data) { - char* fn; - DIR* directory; - int len; - int res; - struct dirent* item; - - if (dirname == NULL || callback == NULL) { - return; - } - - directory = opendir(dirname); - - if (directory == NULL) { - if (errno != ENOENT) { - fprintf(stderr, "opendir \"%s\" failed: %s\n", dirname, strerror(errno)); - } - return; - } - - while ((item = readdir(directory)) != NULL) { - if (item->d_type != DT_REG) { - continue; - } - - len = strlen(dirname) + 1 + strlen(item->d_name) + 1; - fn = malloc(len); - - if (fn == NULL) { - fprintf(stderr, "failed to malloc %d bytes for fn\n", len); - continue; - } - - res = snprintf(fn, len, "%s/%s", dirname, item->d_name); - - if (res < 0 || res >= len) { - fprintf(stderr, "failed to format file name (return value %d)\n", res); - free(fn); - continue; - } - - callback(fn, data); - free(fn); - } - - if (closedir(directory) == -1) { - fprintf(stderr, "closedir \"%s\" failed: %s\n", dirname, strerror(errno)); - } -} - -static void UpdateFileSize(const char* fn, void* data) { - int* size = (int*) data; - struct stat st; - - if (!fn || !data) { - return; - } - - if (stat(fn, &st) == -1) { - fprintf(stderr, "stat \"%s\" failed: %s\n", fn, strerror(errno)); - return; - } - - *size += st.st_size; -} - -// Deletes the stash directory and all files in it. Assumes that it only -// contains files. There is nothing we can do about unlikely, but possible -// errors, so they are merely logged. - -static void DeleteFile(const char* fn, void* data) { - if (fn) { - fprintf(stderr, "deleting %s\n", fn); - - if (unlink(fn) == -1 && errno != ENOENT) { - fprintf(stderr, "unlink \"%s\" failed: %s\n", fn, strerror(errno)); - } - } -} - -static void DeletePartial(const char* fn, void* data) { - if (fn && strstr(fn, ".partial") != NULL) { - DeleteFile(fn, data); - } -} - -static void DeleteStash(const char* base) { - char* dirname; - - if (base == NULL) { - return; - } - - dirname = GetStashFileName(base, NULL, NULL); - - if (dirname == NULL) { - return; - } - - fprintf(stderr, "deleting stash %s\n", base); - EnumerateStash(dirname, DeleteFile, NULL); - - if (rmdir(dirname) == -1) { - if (errno != ENOENT && errno != ENOTDIR) { - fprintf(stderr, "rmdir \"%s\" failed: %s\n", dirname, strerror(errno)); - } - } - - free(dirname); -} - -static int LoadStash(const char* base, const char* id, int verify, int* blocks, uint8_t** buffer, - size_t* buffer_alloc, int printnoent) { - char *fn = NULL; - int blockcount = 0; - int fd = -1; - int rc = -1; - int res; - struct stat st; - - if (!base || !id || !buffer || !buffer_alloc) { - goto lsout; - } - - if (!blocks) { - blocks = &blockcount; - } - - fn = GetStashFileName(base, id, NULL); - - if (fn == NULL) { - goto lsout; - } - - res = stat(fn, &st); - - if (res == -1) { - if (errno != ENOENT || printnoent) { - fprintf(stderr, "stat \"%s\" failed: %s\n", fn, strerror(errno)); - } - goto lsout; - } - - fprintf(stderr, " loading %s\n", fn); - - if ((st.st_size % BLOCKSIZE) != 0) { - fprintf(stderr, "%s size %zd not multiple of block size %d", fn, st.st_size, BLOCKSIZE); - goto lsout; - } - - fd = TEMP_FAILURE_RETRY(open(fn, O_RDONLY)); - - if (fd == -1) { - fprintf(stderr, "open \"%s\" failed: %s\n", fn, strerror(errno)); - goto lsout; - } - - allocate(st.st_size, buffer, buffer_alloc); - - if (read_all(fd, *buffer, st.st_size) == -1) { - goto lsout; - } - - *blocks = st.st_size / BLOCKSIZE; - - if (verify && VerifyBlocks(id, *buffer, *blocks, 1) != 0) { - fprintf(stderr, "unexpected contents in %s\n", fn); - DeleteFile(fn, NULL); - goto lsout; - } - - rc = 0; - -lsout: - if (fd != -1) { - close(fd); - } - - if (fn) { - free(fn); - } - - return rc; -} - -static int WriteStash(const char* base, const char* id, int blocks, uint8_t* buffer, - int checkspace, int *exists) { - char *fn = NULL; - char *cn = NULL; - int fd = -1; - int rc = -1; - int res; - struct stat st; - - if (base == NULL || buffer == NULL) { - goto wsout; - } - - if (checkspace && CacheSizeCheck(blocks * BLOCKSIZE) != 0) { - fprintf(stderr, "not enough space to write stash\n"); - goto wsout; - } - - fn = GetStashFileName(base, id, ".partial"); - cn = GetStashFileName(base, id, NULL); - - if (fn == NULL || cn == NULL) { - goto wsout; - } - - if (exists) { - res = stat(cn, &st); - - if (res == 0) { - // The file already exists and since the name is the hash of the contents, - // it's safe to assume the contents are identical (accidental hash collisions - // are unlikely) - fprintf(stderr, " skipping %d existing blocks in %s\n", blocks, cn); - *exists = 1; - rc = 0; - goto wsout; - } - - *exists = 0; - } - - fprintf(stderr, " writing %d blocks to %s\n", blocks, cn); - - fd = TEMP_FAILURE_RETRY(open(fn, O_WRONLY | O_CREAT | O_TRUNC | O_SYNC, STASH_FILE_MODE)); - - if (fd == -1) { - fprintf(stderr, "failed to create \"%s\": %s\n", fn, strerror(errno)); - goto wsout; - } - - if (write_all(fd, buffer, blocks * BLOCKSIZE) == -1) { - goto wsout; - } - - if (fsync(fd) == -1) { - fprintf(stderr, "fsync \"%s\" failed: %s\n", fn, strerror(errno)); - goto wsout; - } - - if (rename(fn, cn) == -1) { - fprintf(stderr, "rename(\"%s\", \"%s\") failed: %s\n", fn, cn, strerror(errno)); - goto wsout; - } - - rc = 0; - -wsout: - if (fd != -1) { - close(fd); - } - - if (fn) { - free(fn); - } - - if (cn) { - free(cn); - } - - return rc; -} - -// Creates a directory for storing stash files and checks if the /cache partition -// hash enough space for the expected amount of blocks we need to store. Returns -// >0 if we created the directory, zero if it existed already, and <0 of failure. - -static int CreateStash(State* state, int maxblocks, const char* blockdev, char** base) { - char* dirname = NULL; - const uint8_t* digest; - int rc = -1; - int res; - int size = 0; - SHA_CTX ctx; - struct stat st; - - if (blockdev == NULL || base == NULL) { - goto csout; - } - - // Stash directory should be different for each partition to avoid conflicts - // when updating multiple partitions at the same time, so we use the hash of - // the block device name as the base directory - SHA_init(&ctx); - SHA_update(&ctx, blockdev, strlen(blockdev)); - digest = SHA_final(&ctx); - *base = PrintSha1(digest); - - if (*base == NULL) { - goto csout; - } - - dirname = GetStashFileName(*base, NULL, NULL); - - if (dirname == NULL) { - goto csout; - } - - res = stat(dirname, &st); - - if (res == -1 && errno != ENOENT) { - ErrorAbort(state, "stat \"%s\" failed: %s\n", dirname, strerror(errno)); - goto csout; - } else if (res != 0) { - fprintf(stderr, "creating stash %s\n", dirname); - res = mkdir(dirname, STASH_DIRECTORY_MODE); - - if (res != 0) { - ErrorAbort(state, "mkdir \"%s\" failed: %s\n", dirname, strerror(errno)); - goto csout; - } - - if (CacheSizeCheck(maxblocks * BLOCKSIZE) != 0) { - ErrorAbort(state, "not enough space for stash\n"); - goto csout; - } - - rc = 1; // Created directory - goto csout; - } - - fprintf(stderr, "using existing stash %s\n", dirname); - - // If the directory already exists, calculate the space already allocated to - // stash files and check if there's enough for all required blocks. Delete any - // partially completed stash files first. - - EnumerateStash(dirname, DeletePartial, NULL); - EnumerateStash(dirname, UpdateFileSize, &size); - - size = (maxblocks * BLOCKSIZE) - size; - - if (size > 0 && CacheSizeCheck(size) != 0) { - ErrorAbort(state, "not enough space for stash (%d more needed)\n", size); - goto csout; - } - - rc = 0; // Using existing directory - -csout: - if (dirname) { - free(dirname); - } - - return rc; -} - -static int SaveStash(const char* base, char** wordsave, uint8_t** buffer, size_t* buffer_alloc, - int fd, int usehash, int* isunresumable) { - char *id = NULL; - int res = -1; - int blocks = 0; - - if (!wordsave || !buffer || !buffer_alloc || !isunresumable) { - return -1; - } - - id = strtok_r(NULL, " ", wordsave); - - if (id == NULL) { - fprintf(stderr, "missing id field in stash command\n"); - return -1; - } - - if (usehash && LoadStash(base, id, 1, &blocks, buffer, buffer_alloc, 0) == 0) { - // Stash file already exists and has expected contents. Do not - // read from source again, as the source may have been already - // overwritten during a previous attempt. - return 0; - } - - if (LoadSrcTgtVersion1(wordsave, NULL, &blocks, buffer, buffer_alloc, fd) == -1) { - return -1; - } - - if (usehash && VerifyBlocks(id, *buffer, blocks, 1) != 0) { - // Source blocks have unexpected contents. If we actually need this - // data later, this is an unrecoverable error. However, the command - // that uses the data may have already completed previously, so the - // possible failure will occur during source block verification. - fprintf(stderr, "failed to load source blocks for stash %s\n", id); - return 0; - } - - fprintf(stderr, "stashing %d blocks to %s\n", blocks, id); - return WriteStash(base, id, blocks, *buffer, 0, NULL); -} - -static int FreeStash(const char* base, const char* id) { - char *fn = NULL; - - if (base == NULL || id == NULL) { - return -1; - } - - fn = GetStashFileName(base, id, NULL); - - if (fn == NULL) { - return -1; - } - - DeleteFile(fn, NULL); - free(fn); - - return 0; -} - -static void MoveRange(uint8_t* dest, RangeSet* locs, const uint8_t* source) { - // source contains packed data, which we want to move to the - // locations given in *locs in the dest buffer. source and dest - // may be the same buffer. - - int start = locs->size; - int i; - for (i = locs->count-1; i >= 0; --i) { - int blocks = locs->pos[i*2+1] - locs->pos[i*2]; - start -= blocks; - memmove(dest + (locs->pos[i*2] * BLOCKSIZE), source + (start * BLOCKSIZE), - blocks * BLOCKSIZE); - } -} - -// Do a source/target load for move/bsdiff/imgdiff in version 2. -// 'wordsave' is the save_ptr of a strtok_r()-in-progress. We expect -// to parse the remainder of the string as one of: -// -// -// (loads data from source image only) -// -// - <[stash_id:stash_range] ...> -// (loads data from stashes only) -// -// <[stash_id:stash_range] ...> -// (loads data from both source image and stashes) -// -// On return, buffer is filled with the loaded source data (rearranged -// and combined with stashed data as necessary). buffer may be -// reallocated if needed to accommodate the source data. *tgt is the -// target RangeSet. Any stashes required are loaded using LoadStash. - -static int LoadSrcTgtVersion2(char** wordsave, RangeSet** tgt, int* src_blocks, - uint8_t** buffer, size_t* buffer_alloc, int fd, - const char* stashbase, int* overlap) { - char* word; - char* colonsave; - char* colon; - int id; - int res; - RangeSet* locs; - size_t stashalloc = 0; - uint8_t* stash = NULL; - - if (tgt != NULL) { - word = strtok_r(NULL, " ", wordsave); - *tgt = parse_range(word); - } - - word = strtok_r(NULL, " ", wordsave); - *src_blocks = strtol(word, NULL, 0); - - allocate(*src_blocks * BLOCKSIZE, buffer, buffer_alloc); - - word = strtok_r(NULL, " ", wordsave); - if (word[0] == '-' && word[1] == '\0') { - // no source ranges, only stashes - } else { - RangeSet* src = parse_range(word); - res = ReadBlocks(src, *buffer, fd); - - if (overlap && tgt) { - *overlap = range_overlaps(src, *tgt); - } - - free(src); - - if (res == -1) { - return -1; - } - - word = strtok_r(NULL, " ", wordsave); - if (word == NULL) { - // no stashes, only source range - return 0; - } - - locs = parse_range(word); - MoveRange(*buffer, locs, *buffer); - free(locs); - } - - while ((word = strtok_r(NULL, " ", wordsave)) != NULL) { - // Each word is a an index into the stash table, a colon, and - // then a rangeset describing where in the source block that - // stashed data should go. - colonsave = NULL; - colon = strtok_r(word, ":", &colonsave); - - res = LoadStash(stashbase, colon, 0, NULL, &stash, &stashalloc, 1); - - if (res == -1) { - // These source blocks will fail verification if used later, but we - // will let the caller decide if this is a fatal failure - fprintf(stderr, "failed to load stash %s\n", colon); - continue; - } - - colon = strtok_r(NULL, ":", &colonsave); - locs = parse_range(colon); - - MoveRange(*buffer, locs, stash); - free(locs); - } - - if (stash) { - free(stash); - } - - return 0; -} - -// Parameters for transfer list command functions -typedef struct { - char* cmdname; - char* cpos; - char* freestash; - char* stashbase; - int canwrite; - int createdstash; - int fd; - int foundwrites; - int isunresumable; - int version; - int written; - NewThreadInfo nti; - pthread_t thread; - size_t bufsize; - uint8_t* buffer; - uint8_t* patch_start; -} CommandParameters; - -// Do a source/target load for move/bsdiff/imgdiff in version 3. -// -// Parameters are the same as for LoadSrcTgtVersion2, except for 'onehash', which -// tells the function whether to expect separate source and targe block hashes, or -// if they are both the same and only one hash should be expected, and -// 'isunresumable', which receives a non-zero value if block verification fails in -// a way that the update cannot be resumed anymore. -// -// If the function is unable to load the necessary blocks or their contents don't -// match the hashes, the return value is -1 and the command should be aborted. -// -// If the return value is 1, the command has already been completed according to -// the contents of the target blocks, and should not be performed again. -// -// If the return value is 0, source blocks have expected content and the command -// can be performed. - -static int LoadSrcTgtVersion3(CommandParameters* params, RangeSet** tgt, int* src_blocks, - int onehash, int* overlap) { - char* srchash = NULL; - char* tgthash = NULL; - int stash_exists = 0; - int overlap_blocks = 0; - int rc = -1; - uint8_t* tgtbuffer = NULL; - - if (!params|| !tgt || !src_blocks || !overlap) { - goto v3out; - } - - srchash = strtok_r(NULL, " ", ¶ms->cpos); - - if (srchash == NULL) { - fprintf(stderr, "missing source hash\n"); - goto v3out; - } - - if (onehash) { - tgthash = srchash; - } else { - tgthash = strtok_r(NULL, " ", ¶ms->cpos); - - if (tgthash == NULL) { - fprintf(stderr, "missing target hash\n"); - goto v3out; - } - } - - if (LoadSrcTgtVersion2(¶ms->cpos, tgt, src_blocks, ¶ms->buffer, ¶ms->bufsize, - params->fd, params->stashbase, overlap) == -1) { - goto v3out; - } - - tgtbuffer = (uint8_t*) malloc((*tgt)->size * BLOCKSIZE); - - if (tgtbuffer == NULL) { - fprintf(stderr, "failed to allocate %d bytes\n", (*tgt)->size * BLOCKSIZE); - goto v3out; - } - - if (ReadBlocks(*tgt, tgtbuffer, params->fd) == -1) { - goto v3out; - } - - if (VerifyBlocks(tgthash, tgtbuffer, (*tgt)->size, 0) == 0) { - // Target blocks already have expected content, command should be skipped - rc = 1; - goto v3out; - } - - if (VerifyBlocks(srchash, params->buffer, *src_blocks, 1) == 0) { - // If source and target blocks overlap, stash the source blocks so we can - // resume from possible write errors - if (*overlap) { - fprintf(stderr, "stashing %d overlapping blocks to %s\n", *src_blocks, - srchash); - - if (WriteStash(params->stashbase, srchash, *src_blocks, params->buffer, 1, - &stash_exists) != 0) { - fprintf(stderr, "failed to stash overlapping source blocks\n"); - goto v3out; - } - - // Can be deleted when the write has completed - if (!stash_exists) { - params->freestash = srchash; - } - } - - // Source blocks have expected content, command can proceed - rc = 0; - goto v3out; - } - - if (*overlap && LoadStash(params->stashbase, srchash, 1, NULL, ¶ms->buffer, - ¶ms->bufsize, 1) == 0) { - // Overlapping source blocks were previously stashed, command can proceed. - // We are recovering from an interrupted command, so we don't know if the - // stash can safely be deleted after this command. - rc = 0; - goto v3out; - } - - // Valid source data not available, update cannot be resumed - fprintf(stderr, "partition has unexpected contents\n"); - params->isunresumable = 1; - -v3out: - if (tgtbuffer) { - free(tgtbuffer); - } - - return rc; -} - -static int PerformCommandMove(CommandParameters* params) { - int blocks = 0; - int overlap = 0; - int rc = -1; - int status = 0; - RangeSet* tgt = NULL; - - if (!params) { - goto pcmout; - } - - if (params->version == 1) { - status = LoadSrcTgtVersion1(¶ms->cpos, &tgt, &blocks, ¶ms->buffer, - ¶ms->bufsize, params->fd); - } else if (params->version == 2) { - status = LoadSrcTgtVersion2(¶ms->cpos, &tgt, &blocks, ¶ms->buffer, - ¶ms->bufsize, params->fd, params->stashbase, NULL); - } else if (params->version >= 3) { - status = LoadSrcTgtVersion3(params, &tgt, &blocks, 1, &overlap); - } - - if (status == -1) { - fprintf(stderr, "failed to read blocks for move\n"); - goto pcmout; - } - - if (status == 0) { - params->foundwrites = 1; - } else if (params->foundwrites) { - fprintf(stderr, "warning: commands executed out of order [%s]\n", params->cmdname); - } - - if (params->canwrite) { - if (status == 0) { - fprintf(stderr, " moving %d blocks\n", blocks); - - if (WriteBlocks(tgt, params->buffer, params->fd) == -1) { - goto pcmout; - } - } else { - fprintf(stderr, "skipping %d already moved blocks\n", blocks); - } - - } - - if (params->freestash) { - FreeStash(params->stashbase, params->freestash); - params->freestash = NULL; - } - - params->written += tgt->size; - rc = 0; - -pcmout: - if (tgt) { - free(tgt); - } - - return rc; -} - -static int PerformCommandStash(CommandParameters* params) { - if (!params) { - return -1; - } - - return SaveStash(params->stashbase, ¶ms->cpos, ¶ms->buffer, ¶ms->bufsize, - params->fd, (params->version >= 3), ¶ms->isunresumable); -} - -static int PerformCommandFree(CommandParameters* params) { - if (!params) { - return -1; - } - - if (params->createdstash || params->canwrite) { - return FreeStash(params->stashbase, params->cpos); - } - - return 0; -} - -static int PerformCommandZero(CommandParameters* params) { - char* range = NULL; - int i; - int j; - int rc = -1; - RangeSet* tgt = NULL; - - if (!params) { - goto pczout; - } - - range = strtok_r(NULL, " ", ¶ms->cpos); - - if (range == NULL) { - fprintf(stderr, "missing target blocks for zero\n"); - goto pczout; - } - - tgt = parse_range(range); - - fprintf(stderr, " zeroing %d blocks\n", tgt->size); - - allocate(BLOCKSIZE, ¶ms->buffer, ¶ms->bufsize); - memset(params->buffer, 0, BLOCKSIZE); - - if (params->canwrite) { - for (i = 0; i < tgt->count; ++i) { - if (!check_lseek(params->fd, (off64_t) tgt->pos[i * 2] * BLOCKSIZE, SEEK_SET)) { - goto pczout; - } - - for (j = tgt->pos[i * 2]; j < tgt->pos[i * 2 + 1]; ++j) { - if (write_all(params->fd, params->buffer, BLOCKSIZE) == -1) { - goto pczout; - } - } - } - } - - if (params->cmdname[0] == 'z') { - // Update only for the zero command, as the erase command will call - // this if DEBUG_ERASE is defined. - params->written += tgt->size; - } - - rc = 0; - -pczout: - if (tgt) { - free(tgt); - } - - return rc; -} - -static int PerformCommandNew(CommandParameters* params) { - char* range = NULL; - int rc = -1; - RangeSet* tgt = NULL; - RangeSinkState rss; - - if (!params) { - goto pcnout; - } - - range = strtok_r(NULL, " ", ¶ms->cpos); - - if (range == NULL) { - goto pcnout; - } - - tgt = parse_range(range); - - if (params->canwrite) { - fprintf(stderr, " writing %d blocks of new data\n", tgt->size); - - rss.fd = params->fd; - rss.tgt = tgt; - rss.p_block = 0; - rss.p_remain = (tgt->pos[1] - tgt->pos[0]) * BLOCKSIZE; - - if (!check_lseek(params->fd, (off64_t) tgt->pos[0] * BLOCKSIZE, SEEK_SET)) { - goto pcnout; - } - - pthread_mutex_lock(¶ms->nti.mu); - params->nti.rss = &rss; - pthread_cond_broadcast(¶ms->nti.cv); - - while (params->nti.rss) { - pthread_cond_wait(¶ms->nti.cv, ¶ms->nti.mu); - } - - pthread_mutex_unlock(¶ms->nti.mu); - } - - params->written += tgt->size; - rc = 0; - -pcnout: - if (tgt) { - free(tgt); - } - - return rc; -} - -static int PerformCommandDiff(CommandParameters* params) { - char* logparams = NULL; - char* value = NULL; - int blocks = 0; - int overlap = 0; - int rc = -1; - int status = 0; - RangeSet* tgt = NULL; - RangeSinkState rss; - size_t len = 0; - size_t offset = 0; - Value patch_value; - - if (!params) { - goto pcdout; - } - - logparams = strdup(params->cpos); - value = strtok_r(NULL, " ", ¶ms->cpos); - - if (value == NULL) { - fprintf(stderr, "missing patch offset for %s\n", params->cmdname); - goto pcdout; - } - - offset = strtoul(value, NULL, 0); - - value = strtok_r(NULL, " ", ¶ms->cpos); - - if (value == NULL) { - fprintf(stderr, "missing patch length for %s\n", params->cmdname); - goto pcdout; - } - - len = strtoul(value, NULL, 0); - - if (params->version == 1) { - status = LoadSrcTgtVersion1(¶ms->cpos, &tgt, &blocks, ¶ms->buffer, - ¶ms->bufsize, params->fd); - } else if (params->version == 2) { - status = LoadSrcTgtVersion2(¶ms->cpos, &tgt, &blocks, ¶ms->buffer, - ¶ms->bufsize, params->fd, params->stashbase, NULL); - } else if (params->version >= 3) { - status = LoadSrcTgtVersion3(params, &tgt, &blocks, 0, &overlap); - } - - if (status == -1) { - fprintf(stderr, "failed to read blocks for diff\n"); - goto pcdout; - } - - if (status == 0) { - params->foundwrites = 1; - } else if (params->foundwrites) { - fprintf(stderr, "warning: commands executed out of order [%s]\n", params->cmdname); - } - - if (params->canwrite) { - if (status == 0) { - fprintf(stderr, "patching %d blocks to %d\n", blocks, tgt->size); - - patch_value.type = VAL_BLOB; - patch_value.size = len; - patch_value.data = (char*) (params->patch_start + offset); - - rss.fd = params->fd; - rss.tgt = tgt; - rss.p_block = 0; - rss.p_remain = (tgt->pos[1] - tgt->pos[0]) * BLOCKSIZE; - - if (!check_lseek(params->fd, (off64_t) tgt->pos[0] * BLOCKSIZE, SEEK_SET)) { - goto pcdout; - } - - if (params->cmdname[0] == 'i') { // imgdiff - ApplyImagePatch(params->buffer, blocks * BLOCKSIZE, &patch_value, - &RangeSinkWrite, &rss, NULL, NULL); - } else { - ApplyBSDiffPatch(params->buffer, blocks * BLOCKSIZE, &patch_value, - 0, &RangeSinkWrite, &rss, NULL); - } - - // We expect the output of the patcher to fill the tgt ranges exactly. - if (rss.p_block != tgt->count || rss.p_remain != 0) { - fprintf(stderr, "range sink underrun?\n"); - } - } else { - fprintf(stderr, "skipping %d blocks already patched to %d [%s]\n", - blocks, tgt->size, logparams); - } - } - - if (params->freestash) { - FreeStash(params->stashbase, params->freestash); - params->freestash = NULL; - } - - params->written += tgt->size; - rc = 0; - -pcdout: - if (logparams) { - free(logparams); - } - - if (tgt) { - free(tgt); - } - - return rc; -} - -static int PerformCommandErase(CommandParameters* params) { - char* range = NULL; - int i; - int rc = -1; - RangeSet* tgt = NULL; - struct stat st; - uint64_t blocks[2]; - - if (DEBUG_ERASE) { - return PerformCommandZero(params); - } - - if (!params) { - goto pceout; - } - - if (fstat(params->fd, &st) == -1) { - fprintf(stderr, "failed to fstat device to erase: %s\n", strerror(errno)); - goto pceout; - } - - if (!S_ISBLK(st.st_mode)) { - fprintf(stderr, "not a block device; skipping erase\n"); - goto pceout; - } - - range = strtok_r(NULL, " ", ¶ms->cpos); - - if (range == NULL) { - fprintf(stderr, "missing target blocks for zero\n"); - goto pceout; - } - - tgt = parse_range(range); - - if (params->canwrite) { - fprintf(stderr, " erasing %d blocks\n", tgt->size); - - for (i = 0; i < tgt->count; ++i) { - // offset in bytes - blocks[0] = tgt->pos[i * 2] * (uint64_t) BLOCKSIZE; - // length in bytes - blocks[1] = (tgt->pos[i * 2 + 1] - tgt->pos[i * 2]) * (uint64_t) BLOCKSIZE; - - if (ioctl(params->fd, BLKDISCARD, &blocks) == -1) { - fprintf(stderr, "BLKDISCARD ioctl failed: %s\n", strerror(errno)); - goto pceout; - } - } - } - - rc = 0; - -pceout: - if (tgt) { - free(tgt); - } - - return rc; -} - -// Definitions for transfer list command functions -typedef int (*CommandFunction)(CommandParameters*); - -typedef struct { - const char* name; - CommandFunction f; -} Command; - -// CompareCommands and CompareCommandNames are for the hash table - -static int CompareCommands(const void* c1, const void* c2) { - return strcmp(((const Command*) c1)->name, ((const Command*) c2)->name); -} - -static int CompareCommandNames(const void* c1, const void* c2) { - return strcmp(((const Command*) c1)->name, (const char*) c2); -} - -// HashString is used to hash command names for the hash table - -static unsigned int HashString(const char *s) { - unsigned int hash = 0; - if (s) { - while (*s) { - hash = hash * 33 + *s++; - } - } - return hash; -} - -// args: -// - block device (or file) to modify in-place -// - transfer list (blob) -// - new data stream (filename within package.zip) -// - patch stream (filename within package.zip, must be uncompressed) - -static Value* PerformBlockImageUpdate(const char* name, State* state, int argc, Expr* argv[], - const Command* commands, int cmdcount, int dryrun) { - - char* line = NULL; - char* linesave = NULL; - char* logcmd = NULL; - char* transfer_list = NULL; - CommandParameters params; - const Command* cmd = NULL; - const ZipEntry* new_entry = NULL; - const ZipEntry* patch_entry = NULL; - FILE* cmd_pipe = NULL; - HashTable* cmdht = NULL; - int i; - int res; - int rc = -1; - int stash_max_blocks = 0; - int total_blocks = 0; - pthread_attr_t attr; - unsigned int cmdhash; - UpdaterInfo* ui = NULL; - Value* blockdev_filename = NULL; - Value* new_data_fn = NULL; - Value* patch_data_fn = NULL; - Value* transfer_list_value = NULL; - ZipArchive* za = NULL; - - memset(¶ms, 0, sizeof(params)); - params.canwrite = !dryrun; - - fprintf(stderr, "performing %s\n", dryrun ? "verification" : "update"); - - if (ReadValueArgs(state, argv, 4, &blockdev_filename, &transfer_list_value, - &new_data_fn, &patch_data_fn) < 0) { - goto pbiudone; - } - - if (blockdev_filename->type != VAL_STRING) { - ErrorAbort(state, "blockdev_filename argument to %s must be string", name); - goto pbiudone; - } - if (transfer_list_value->type != VAL_BLOB) { - ErrorAbort(state, "transfer_list argument to %s must be blob", name); - goto pbiudone; - } - if (new_data_fn->type != VAL_STRING) { - ErrorAbort(state, "new_data_fn argument to %s must be string", name); - goto pbiudone; - } - if (patch_data_fn->type != VAL_STRING) { - ErrorAbort(state, "patch_data_fn argument to %s must be string", name); - goto pbiudone; - } - - ui = (UpdaterInfo*) state->cookie; - - if (ui == NULL) { - goto pbiudone; - } - - cmd_pipe = ui->cmd_pipe; - za = ui->package_zip; - - if (cmd_pipe == NULL || za == NULL) { - goto pbiudone; - } - - patch_entry = mzFindZipEntry(za, patch_data_fn->data); - - if (patch_entry == NULL) { - fprintf(stderr, "%s(): no file \"%s\" in package", name, patch_data_fn->data); - goto pbiudone; - } - - params.patch_start = ui->package_zip_addr + mzGetZipEntryOffset(patch_entry); - new_entry = mzFindZipEntry(za, new_data_fn->data); - - if (new_entry == NULL) { - fprintf(stderr, "%s(): no file \"%s\" in package", name, new_data_fn->data); - goto pbiudone; - } - - params.fd = TEMP_FAILURE_RETRY(open(blockdev_filename->data, O_RDWR)); - - if (params.fd == -1) { - fprintf(stderr, "open \"%s\" failed: %s\n", blockdev_filename->data, strerror(errno)); - goto pbiudone; - } - - if (params.canwrite) { - params.nti.za = za; - params.nti.entry = new_entry; - - pthread_mutex_init(¶ms.nti.mu, NULL); - pthread_cond_init(¶ms.nti.cv, NULL); - pthread_attr_init(&attr); - pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); - - int error = pthread_create(¶ms.thread, &attr, unzip_new_data, ¶ms.nti); - if (error != 0) { - fprintf(stderr, "pthread_create failed: %s\n", strerror(error)); - goto pbiudone; - } - } - - // The data in transfer_list_value is not necessarily null-terminated, so we need - // to copy it to a new buffer and add the null that strtok_r will need. - transfer_list = malloc(transfer_list_value->size + 1); - - if (transfer_list == NULL) { - fprintf(stderr, "failed to allocate %zd bytes for transfer list\n", - transfer_list_value->size + 1); - goto pbiudone; - } - - memcpy(transfer_list, transfer_list_value->data, transfer_list_value->size); - transfer_list[transfer_list_value->size] = '\0'; - - // First line in transfer list is the version number - line = strtok_r(transfer_list, "\n", &linesave); - params.version = strtol(line, NULL, 0); - - if (params.version < 1 || params.version > 3) { - fprintf(stderr, "unexpected transfer list version [%s]\n", line); - goto pbiudone; - } - - fprintf(stderr, "blockimg version is %d\n", params.version); - - // Second line in transfer list is the total number of blocks we expect to write - line = strtok_r(NULL, "\n", &linesave); - total_blocks = strtol(line, NULL, 0); - - if (total_blocks < 0) { - ErrorAbort(state, "unexpected block count [%s]\n", line); - goto pbiudone; - } else if (total_blocks == 0) { - rc = 0; - goto pbiudone; - } - - if (params.version >= 2) { - // Third line is how many stash entries are needed simultaneously - line = strtok_r(NULL, "\n", &linesave); - fprintf(stderr, "maximum stash entries %s\n", line); - - // Fourth line is the maximum number of blocks that will be stashed simultaneously - line = strtok_r(NULL, "\n", &linesave); - stash_max_blocks = strtol(line, NULL, 0); - - if (stash_max_blocks < 0) { - ErrorAbort(state, "unexpected maximum stash blocks [%s]\n", line); - goto pbiudone; - } - - if (stash_max_blocks >= 0) { - res = CreateStash(state, stash_max_blocks, blockdev_filename->data, - ¶ms.stashbase); - - if (res == -1) { - goto pbiudone; - } - - params.createdstash = res; - } - } - - // Build a hash table of the available commands - cmdht = mzHashTableCreate(cmdcount, NULL); - - for (i = 0; i < cmdcount; ++i) { - cmdhash = HashString(commands[i].name); - mzHashTableLookup(cmdht, cmdhash, (void*) &commands[i], CompareCommands, true); - } - - // Subsequent lines are all individual transfer commands - for (line = strtok_r(NULL, "\n", &linesave); line; - line = strtok_r(NULL, "\n", &linesave)) { - - logcmd = strdup(line); - params.cmdname = strtok_r(line, " ", ¶ms.cpos); - - if (params.cmdname == NULL) { - fprintf(stderr, "missing command [%s]\n", line); - goto pbiudone; - } - - cmdhash = HashString(params.cmdname); - cmd = (const Command*) mzHashTableLookup(cmdht, cmdhash, params.cmdname, - CompareCommandNames, false); - - if (cmd == NULL) { - fprintf(stderr, "unexpected command [%s]\n", params.cmdname); - goto pbiudone; - } - - if (cmd->f != NULL && cmd->f(¶ms) == -1) { - fprintf(stderr, "failed to execute command [%s]\n", - logcmd ? logcmd : params.cmdname); - goto pbiudone; - } - - if (logcmd) { - free(logcmd); - logcmd = NULL; - } - - if (params.canwrite) { - fprintf(cmd_pipe, "set_progress %.4f\n", (double) params.written / total_blocks); - fflush(cmd_pipe); - } - } - - if (params.canwrite) { - pthread_join(params.thread, NULL); - - fprintf(stderr, "wrote %d blocks; expected %d\n", params.written, total_blocks); - fprintf(stderr, "max alloc needed was %zu\n", params.bufsize); - - // Delete stash only after successfully completing the update, as it - // may contain blocks needed to complete the update later. - DeleteStash(params.stashbase); - } else { - fprintf(stderr, "verified partition contents; update may be resumed\n"); - } - - rc = 0; - -pbiudone: - if (params.fd != -1) { - if (fsync(params.fd) == -1) { - fprintf(stderr, "fsync failed: %s\n", strerror(errno)); - } - close(params.fd); - } - - if (logcmd) { - free(logcmd); - } - - if (cmdht) { - mzHashTableFree(cmdht); - } - - if (params.buffer) { - free(params.buffer); - } - - if (transfer_list) { - free(transfer_list); - } - - if (blockdev_filename) { - FreeValue(blockdev_filename); - } - - if (transfer_list_value) { - FreeValue(transfer_list_value); - } - - if (new_data_fn) { - FreeValue(new_data_fn); - } - - if (patch_data_fn) { - FreeValue(patch_data_fn); - } - - // Only delete the stash if the update cannot be resumed, or it's - // a verification run and we created the stash. - if (params.isunresumable || (!params.canwrite && params.createdstash)) { - DeleteStash(params.stashbase); - } - - if (params.stashbase) { - free(params.stashbase); - } - - return StringValue(rc == 0 ? strdup("t") : strdup("")); -} - -// The transfer list is a text file containing commands to -// transfer data from one place to another on the target -// partition. We parse it and execute the commands in order: -// -// zero [rangeset] -// - fill the indicated blocks with zeros -// -// new [rangeset] -// - fill the blocks with data read from the new_data file -// -// erase [rangeset] -// - mark the given blocks as empty -// -// move <...> -// bsdiff <...> -// imgdiff <...> -// - read the source blocks, apply a patch (or not in the -// case of move), write result to target blocks. bsdiff or -// imgdiff specifies the type of patch; move means no patch -// at all. -// -// The format of <...> differs between versions 1 and 2; -// see the LoadSrcTgtVersion{1,2}() functions for a -// description of what's expected. -// -// stash -// - (version 2+ only) load the given source range and stash -// the data in the given slot of the stash table. -// -// The creator of the transfer list will guarantee that no block -// is read (ie, used as the source for a patch or move) after it -// has been written. -// -// In version 2, the creator will guarantee that a given stash is -// loaded (with a stash command) before it's used in a -// move/bsdiff/imgdiff command. -// -// Within one command the source and target ranges may overlap so -// in general we need to read the entire source into memory before -// writing anything to the target blocks. -// -// All the patch data is concatenated into one patch_data file in -// the update package. It must be stored uncompressed because we -// memory-map it in directly from the archive. (Since patches are -// already compressed, we lose very little by not compressing -// their concatenation.) -// -// In version 3, commands that read data from the partition (i.e. -// move/bsdiff/imgdiff/stash) have one or more additional hashes -// before the range parameters, which are used to check if the -// command has already been completed and verify the integrity of -// the source data. - -Value* BlockImageVerifyFn(const char* name, State* state, int argc, Expr* argv[]) { - // Commands which are not tested are set to NULL to skip them completely - const Command commands[] = { - { "bsdiff", PerformCommandDiff }, - { "erase", NULL }, - { "free", PerformCommandFree }, - { "imgdiff", PerformCommandDiff }, - { "move", PerformCommandMove }, - { "new", NULL }, - { "stash", PerformCommandStash }, - { "zero", NULL } - }; - - // Perform a dry run without writing to test if an update can proceed - return PerformBlockImageUpdate(name, state, argc, argv, commands, - sizeof(commands) / sizeof(commands[0]), 1); -} - -Value* BlockImageUpdateFn(const char* name, State* state, int argc, Expr* argv[]) { - const Command commands[] = { - { "bsdiff", PerformCommandDiff }, - { "erase", PerformCommandErase }, - { "free", PerformCommandFree }, - { "imgdiff", PerformCommandDiff }, - { "move", PerformCommandMove }, - { "new", PerformCommandNew }, - { "stash", PerformCommandStash }, - { "zero", PerformCommandZero } - }; - - return PerformBlockImageUpdate(name, state, argc, argv, commands, - sizeof(commands) / sizeof(commands[0]), 0); -} - -Value* RangeSha1Fn(const char* name, State* state, int argc, Expr* argv[]) { - Value* blockdev_filename; - Value* ranges; - const uint8_t* digest = NULL; - if (ReadValueArgs(state, argv, 2, &blockdev_filename, &ranges) < 0) { - return NULL; - } - - if (blockdev_filename->type != VAL_STRING) { - ErrorAbort(state, "blockdev_filename argument to %s must be string", name); - goto done; - } - if (ranges->type != VAL_STRING) { - ErrorAbort(state, "ranges argument to %s must be string", name); - goto done; - } - - int fd = open(blockdev_filename->data, O_RDWR); - if (fd < 0) { - ErrorAbort(state, "open \"%s\" failed: %s", blockdev_filename->data, strerror(errno)); - goto done; - } - - RangeSet* rs = parse_range(ranges->data); - uint8_t buffer[BLOCKSIZE]; - - SHA_CTX ctx; - SHA_init(&ctx); - - int i, j; - for (i = 0; i < rs->count; ++i) { - if (!check_lseek(fd, (off64_t)rs->pos[i*2] * BLOCKSIZE, SEEK_SET)) { - ErrorAbort(state, "failed to seek %s: %s", blockdev_filename->data, - strerror(errno)); - goto done; - } - - for (j = rs->pos[i*2]; j < rs->pos[i*2+1]; ++j) { - if (read_all(fd, buffer, BLOCKSIZE) == -1) { - ErrorAbort(state, "failed to read %s: %s", blockdev_filename->data, - strerror(errno)); - goto done; - } - - SHA_update(&ctx, buffer, BLOCKSIZE); - } - } - digest = SHA_final(&ctx); - close(fd); - - done: - FreeValue(blockdev_filename); - FreeValue(ranges); - if (digest == NULL) { - return StringValue(strdup("")); - } else { - return StringValue(PrintSha1(digest)); - } -} - -void RegisterBlockImageFunctions() { - RegisterFunction("block_image_verify", BlockImageVerifyFn); - RegisterFunction("block_image_update", BlockImageUpdateFn); - RegisterFunction("range_sha1", RangeSha1Fn); -} -- cgit v1.2.3