From 51a0e82eb29a6dfc79f93479883383fbdbf8bcc2 Mon Sep 17 00:00:00 2001 From: Dees_Troy Date: Wed, 5 Sep 2012 15:24:24 -0400 Subject: TWRP-ify AOSP code Pull in most TWRP sources Stub out partition management code Make it compile -- probably will not boot Kind of a mess but have to start somewhere --- pigz/pigz.c | 3128 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3128 insertions(+) create mode 100644 pigz/pigz.c (limited to 'pigz/pigz.c') diff --git a/pigz/pigz.c b/pigz/pigz.c new file mode 100644 index 000000000..97e6faa14 --- /dev/null +++ b/pigz/pigz.c @@ -0,0 +1,3128 @@ +/* pigz.c -- parallel implementation of gzip + * Copyright (C) 2007, 2008, 2009, 2010 Mark Adler + * Version 2.1.6 17 Jan 2010 Mark Adler + */ + +/* + This software is provided 'as-is', without any express or implied + warranty. In no event will the author be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Mark Adler + madler@alumni.caltech.edu + + Mark accepts donations for providing this software. Donations are not + required or expected. Any amount that you feel is appropriate would be + appreciated. You can use this link: + + https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=536055 + + */ + +/* Version history: + 1.0 17 Jan 2007 First version, pipe only + 1.1 28 Jan 2007 Avoid void * arithmetic (some compilers don't get that) + Add note about requiring zlib 1.2.3 + Allow compression level 0 (no compression) + Completely rewrite parallelism -- add a write thread + Use deflateSetDictionary() to make use of history + Tune argument defaults to best performance on four cores + 1.2.1 1 Feb 2007 Add long command line options, add all gzip options + Add debugging options + 1.2.2 19 Feb 2007 Add list (--list) function + Process file names on command line, write .gz output + Write name and time in gzip header, set output file time + Implement all command line options except --recursive + Add --keep option to prevent deleting input files + Add thread tracing information with -vv used + Copy crc32_combine() from zlib (possible thread issue) + 1.3 25 Feb 2007 Implement --recursive + Expand help to show all options + Show help if no arguments or output piping are provided + Process options in GZIP environment variable + Add progress indicator to write thread if --verbose + 1.4 4 Mar 2007 Add --independent to facilitate damaged file recovery + Reallocate jobs for new --blocksize or --processes + Do not delete original if writing to stdout + Allow --processes 1, which does no threading + Add NOTHREAD define to compile without threads + Incorporate license text from zlib in source code + 1.5 25 Mar 2007 Reinitialize jobs for new compression level + Copy attributes and owner from input file to output file + Add decompression and testing + Add -lt (or -ltv) to show all entries and proper lengths + Add decompression, testing, listing of LZW (.Z) files + Only generate and show trace log if DEBUG defined + Take "-" argument to mean read file from stdin + 1.6 30 Mar 2007 Add zlib stream compression (--zlib), and decompression + 1.7 29 Apr 2007 Decompress first entry of a zip file (if deflated) + Avoid empty deflate blocks at end of deflate stream + Show zlib check value (Adler-32) when listing + Don't complain when decompressing empty file + Warn about trailing junk for gzip and zlib streams + Make listings consistent, ignore gzip extra flags + Add zip stream compression (--zip) + 1.8 13 May 2007 Document --zip option in help output + 2.0 19 Oct 2008 Complete rewrite of thread usage and synchronization + Use polling threads and a pool of memory buffers + Remove direct pthread library use, hide in yarn.c + 2.0.1 20 Oct 2008 Check version of zlib at compile time, need >= 1.2.3 + 2.1 24 Oct 2008 Decompress with read, write, inflate, and check threads + Remove spurious use of ctime_r(), ctime() more portable + Change application of job->calc lock to be a semaphore + Detect size of off_t at run time to select %lu vs. %llu + #define large file support macro even if not __linux__ + Remove _LARGEFILE64_SOURCE, _FILE_OFFSET_BITS is enough + Detect file-too-large error and report, blame build + Replace check combination routines with those from zlib + 2.1.1 28 Oct 2008 Fix a leak for files with an integer number of blocks + Update for yarn 1.1 (yarn_prefix and yarn_abort) + 2.1.2 30 Oct 2008 Work around use of beta zlib in production systems + 2.1.3 8 Nov 2008 Don't use zlib combination routines, put back in pigz + 2.1.4 9 Nov 2008 Fix bug when decompressing very short files + 2.1.5 20 Jul 2009 Added 2008, 2009 to --license statement + Allow numeric parameter immediately after -p or -b + Enforce parameter after -p, -b, -s, before other options + Enforce numeric parameters to have only numeric digits + Try to determine the number of processors for -p default + Fix --suffix short option to be -S to match gzip [Bloch] + Decompress if executable named "unpigz" [Amundsen] + Add a little bit of testing to Makefile + 2.1.6 17 Jan 2010 Added pigz.spec to distribution for RPM systems [Brown] + Avoid some compiler warnings + Process symbolic links if piping to stdout [Hoffstätte] + Decompress if executable named "gunzip" [Hoffstätte] + Allow ".tgz" suffix [Chernookiy] + Fix adler32 comparison on .zz files + */ + +#define VERSION "pigz 2.1.6\n" + +/* To-do: + - add --rsyncable (or -R) [use my own algorithm, set min/max block size] + - make source portable for Windows, VMS, etc. (see gzip source code) + - make build portable (currently good for Unixish) + - add bzip2 decompression + */ + +/* + pigz compresses using threads to make use of multiple processors and cores. + The input is broken up into 128 KB chunks with each compressed in parallel. + The individual check value for each chunk is also calculated in parallel. + The compressed data is written in order to the output, and a combined check + value is calculated from the individual check values. + + The compressed data format generated is in the gzip, zlib, or single-entry + zip format using the deflate compression method. The compression produces + partial raw deflate streams which are concatenated by a single write thread + and wrapped with the appropriate header and trailer, where the trailer + contains the combined check value. + + Each partial raw deflate stream is terminated by an empty stored block + (using the Z_SYNC_FLUSH option of zlib), in order to end that partial bit + stream at a byte boundary. That allows the partial streams to be + concatenated simply as sequences of bytes. This adds a very small four to + five byte overhead to the output for each input chunk. + + The default input block size is 128K, but can be changed with the -b option. + The number of compress threads is set by default to 8, which can be changed + using the -p option. Specifying -p 1 avoids the use of threads entirely. + pigz will try to determine the number of processors in the machine, in which + case if that number is two or greater, pigz will use that as the default for + -p instead of 8. + + The input blocks, while compressed independently, have the last 32K of the + previous block loaded as a preset dictionary to preserve the compression + effectiveness of deflating in a single thread. This can be turned off using + the --independent or -i option, so that the blocks can be decompressed + independently for partial error recovery or for random access. + + Decompression can't be parallelized, at least not without specially prepared + deflate streams for that purpose. As a result, pigz uses a single thread + (the main thread) for decompression, but will create three other threads for + reading, writing, and check calculation, which can speed up decompression + under some circumstances. Parallel decompression can be turned off by + specifying one process (-dp 1 or -tp 1). + + pigz requires zlib 1.2.1 or later to allow setting the dictionary when doing + raw deflate. Since zlib 1.2.3 corrects security vulnerabilities in zlib + version 1.2.1 and 1.2.2, conditionals check for zlib 1.2.3 or later during + the compilation of pigz.c. zlib 1.2.4 includes some improvements to + Z_FULL_FLUSH and deflateSetDictionary() that permit identical output for + pigz with and without threads, which is not possible with zlib 1.2.3. This + may be important for uses of pigz -R where small changes in the contents + should result in small changes in the archive for rsync. Note that due to + the details of how the lower levels of compression result in greater speed, + compression level 3 and below does not permit identical pigz output with + and without threads. + + pigz uses the POSIX pthread library for thread control and communication, + through the yarn.h interface to yarn.c. yarn.c can be replaced with + equivalent implementations using other thread libraries. pigz can be + compiled with NOTHREAD #defined to not use threads at all (in which case + pigz will not be able to live up to the "parallel" in its name). + */ + +/* + Details of parallel compression implementation: + + When doing parallel compression, pigz uses the main thread to read the input + in 'size' sized chunks (see -b), and puts those in a compression job list, + each with a sequence number to keep track of the ordering. If it is not the + first chunk, then that job also points to the previous input buffer, from + which the last 32K will be used as a dictionary (unless -i is specified). + This sets a lower limit of 32K on 'size'. + + pigz launches up to 'procs' compression threads (see -p). Each compression + thread continues to look for jobs in the compression list and perform those + jobs until instructed to return. When a job is pulled, the dictionary, if + provided, will be loaded into the deflate engine and then that input buffer + is dropped for reuse. Then the input data is compressed into an output + buffer sized to assure that it can contain maximally expanded deflate data. + The job is then put into the write job list, sorted by the sequence number. + The compress thread however continues to calculate the check value on the + input data, either a CRC-32 or Adler-32, possibly in parallel with the write + thread writing the output data. Once that's done, the compress thread drops + the input buffer and also releases the lock on the check value so that the + write thread can combine it with the previous check values. The compress + thread has then completed that job, and goes to look for another. + + All of the compress threads are left running and waiting even after the last + chunk is processed, so that they can support the next input to be compressed + (more than one input file on the command line). Once pigz is done, it will + call all the compress threads home (that'll do pig, that'll do). + + Before starting to read the input, the main thread launches the write thread + so that it is ready pick up jobs immediately. The compress thread puts the + write jobs in the list in sequence sorted order, so that the first job in + the list is always has the lowest sequence number. The write thread waits + for the next write job in sequence, and then gets that job. The job still + holds its input buffer, from which the write thread gets the input buffer + length for use in check value combination. Then the write thread drops that + input buffer to allow its reuse. Holding on to the input buffer until the + write thread starts also has the benefit that the read and compress threads + can't get way ahead of the write thread and build up a large backlog of + unwritten compressed data. The write thread will write the compressed data, + drop the output buffer, and then wait for the check value to be unlocked + by the compress thread. Then the write thread combines the check value for + this chunk with the total check value for eventual use in the trailer. If + this is not the last chunk, the write thread then goes back to look for the + next output chunk in sequence. After the last chunk, the write thread + returns and joins the main thread. Unlike the compress threads, a new write + thread is launched for each input stream. The write thread writes the + appropriate header and trailer around the compressed data. + + The input and output buffers are reused through their collection in pools. + Each buffer has a use count, which when decremented to zero returns the + buffer to the respective pool. Each input buffer has up to three parallel + uses: as the input for compression, as the data for the check value + calculation, and as a dictionary for compression. Each output buffer has + only one use, which is as the output of compression followed serially as + data to be written. The input pool is limited in the number of buffers, so + that reading does not get way ahead of compression and eat up memory with + more input than can be used. The limit is approximately two times the + number of compression threads. In the case that reading is fast as compared + to compression, that number allows a second set of buffers to be read while + the first set of compressions are being performed. The number of output + buffers is not directly limited, but is indirectly limited by the release of + input buffers to the same number. + */ + +/* use large file functions if available */ +#define _FILE_OFFSET_BITS 64 + +/* included headers and what is expected from each */ +#include /* fflush(), fprintf(), fputs(), getchar(), putc(), */ + /* puts(), printf(), vasprintf(), stderr, EOF, NULL, + SEEK_END, size_t, off_t */ +#include /* exit(), malloc(), free(), realloc(), atol(), */ + /* atoi(), getenv() */ +#include /* va_start(), va_end(), va_list */ +#include /* memset(), memchr(), memcpy(), strcmp(), strcpy() */ + /* strncpy(), strlen(), strcat(), strrchr() */ +#include /* errno, EEXIST */ +#include /* assert() */ +#include /* ctime(), time(), time_t, mktime() */ +#include /* signal(), SIGINT */ +#include /* ssize_t */ +#include /* chmod(), stat(), fstat(), lstat(), struct stat, */ + /* S_IFDIR, S_IFLNK, S_IFMT, S_IFREG */ +#include /* utimes(), gettimeofday(), struct timeval */ +#include /* unlink(), _exit(), read(), write(), close(), */ + /* lseek(), isatty(), chown() */ +#include /* open(), O_CREAT, O_EXCL, O_RDONLY, O_TRUNC, */ + /* O_WRONLY */ +#include /* opendir(), readdir(), closedir(), DIR, */ + /* struct dirent */ +#include /* PATH_MAX */ + +#include "zlib.h" /* deflateInit2(), deflateReset(), deflate(), */ + /* deflateEnd(), deflateSetDictionary(), crc32(), + inflateBackInit(), inflateBack(), inflateBackEnd(), + Z_DEFAULT_COMPRESSION, Z_DEFAULT_STRATEGY, + Z_DEFLATED, Z_NO_FLUSH, Z_NULL, Z_OK, + Z_SYNC_FLUSH, z_stream */ +#if !defined(ZLIB_VERNUM) || ZLIB_VERNUM < 0x1230 +# error Need zlib version 1.2.3 or later +#endif + +#ifndef NOTHREAD +# include "yarn.h" /* thread, launch(), join(), join_all(), */ + /* lock, new_lock(), possess(), twist(), wait_for(), + release(), peek_lock(), free_lock(), yarn_name */ +#endif + +/* for local functions and globals */ +#define local static + +/* prevent end-of-line conversions on MSDOSish operating systems */ +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include /* setmode(), O_BINARY */ +# define SET_BINARY_MODE(fd) setmode(fd, O_BINARY) +#else +# define SET_BINARY_MODE(fd) +#endif + +/* release an allocated pointer, if allocated, and mark as unallocated */ +#define RELEASE(ptr) \ + do { \ + if ((ptr) != NULL) { \ + free(ptr); \ + ptr = NULL; \ + } \ + } while (0) + +/* globals (modified by main thread only when it's the only thread) */ +local int ind; /* input file descriptor */ +local int outd; /* output file descriptor */ +local char in[PATH_MAX+1]; /* input file name (accommodate recursion) */ +local char *out = NULL; /* output file name (allocated if not NULL) */ +local int verbosity; /* 0 = quiet, 1 = normal, 2 = verbose, 3 = trace */ +local int headis; /* 1 to store name, 2 to store date, 3 both */ +local int pipeout; /* write output to stdout even if file */ +local int keep; /* true to prevent deletion of input file */ +local int force; /* true to overwrite, compress links */ +local int form; /* gzip = 0, zlib = 1, zip = 2 or 3 */ +local int recurse; /* true to dive down into directory structure */ +local char *sufx; /* suffix to use (".gz" or user supplied) */ +local char *name; /* name for gzip header */ +local time_t mtime; /* time stamp from input file for gzip header */ +local int list; /* true to list files instead of compress */ +local int first = 1; /* true if we need to print listing header */ +local int decode; /* 0 to compress, 1 to decompress, 2 to test */ +local int level; /* compression level */ +local int rsync; /* true for rsync blocking */ +local int procs; /* maximum number of compression threads (>= 1) */ +local int dict; /* true to initialize dictionary in each thread */ +local size_t size; /* uncompressed input size per thread (>= 32K) */ + +/* saved gzip/zip header data for decompression, testing, and listing */ +local time_t stamp; /* time stamp from gzip header */ +local char *hname = NULL; /* name from header (allocated) */ +local unsigned long zip_crc; /* local header crc */ +local unsigned long zip_clen; /* local header compressed length */ +local unsigned long zip_ulen; /* local header uncompressed length */ + +/* exit with error, delete output file if in the middle of writing it */ +local int bail(char *why, char *what) +{ + if (outd != -1 && out != NULL) + unlink(out); + if (verbosity > 0) + fprintf(stderr, "pigz abort: %s%s\n", why, what); + exit(1); + return 0; +} + +#ifdef DEBUG + +/* starting time of day for tracing */ +local struct timeval start; + +/* trace log */ +local struct log { + struct timeval when; /* time of entry */ + char *msg; /* message */ + struct log *next; /* next entry */ +} *log_head, **log_tail = NULL; +#ifndef NOTHREAD + local lock *log_lock = NULL; +#endif + +/* maximum log entry length */ +#define MAXMSG 256 + +/* set up log (call from main thread before other threads launched) */ +local void log_init(void) +{ + if (log_tail == NULL) { +#ifndef NOTHREAD + log_lock = new_lock(0); +#endif + log_head = NULL; + log_tail = &log_head; + } +} + +/* add entry to trace log */ +local void log_add(char *fmt, ...) +{ + struct timeval now; + struct log *me; + va_list ap; + char msg[MAXMSG]; + + gettimeofday(&now, NULL); + me = malloc(sizeof(struct log)); + if (me == NULL) + bail("not enough memory", ""); + me->when = now; + va_start(ap, fmt); + vsnprintf(msg, MAXMSG, fmt, ap); + va_end(ap); + me->msg = malloc(strlen(msg) + 1); + if (me->msg == NULL) { + free(me); + bail("not enough memory", ""); + } + strcpy(me->msg, msg); + me->next = NULL; +#ifndef NOTHREAD + assert(log_lock != NULL); + possess(log_lock); +#endif + *log_tail = me; + log_tail = &(me->next); +#ifndef NOTHREAD + twist(log_lock, BY, +1); +#endif +} + +/* pull entry from trace log and print it, return false if empty */ +local int log_show(void) +{ + struct log *me; + struct timeval diff; + + if (log_tail == NULL) + return 0; +#ifndef NOTHREAD + possess(log_lock); +#endif + me = log_head; + if (me == NULL) { +#ifndef NOTHREAD + release(log_lock); +#endif + return 0; + } + log_head = me->next; + if (me->next == NULL) + log_tail = &log_head; +#ifndef NOTHREAD + twist(log_lock, BY, -1); +#endif + diff.tv_usec = me->when.tv_usec - start.tv_usec; + diff.tv_sec = me->when.tv_sec - start.tv_sec; + if (diff.tv_usec < 0) { + diff.tv_usec += 1000000L; + diff.tv_sec--; + } + fprintf(stderr, "trace %ld.%06ld %s\n", + (long)diff.tv_sec, (long)diff.tv_usec, me->msg); + fflush(stderr); + free(me->msg); + free(me); + return 1; +} + +/* release log resources (need to do log_init() to use again) */ +local void log_free(void) +{ + struct log *me; + + if (log_tail != NULL) { +#ifndef NOTHREAD + possess(log_lock); +#endif + while ((me = log_head) != NULL) { + log_head = me->next; + free(me->msg); + free(me); + } +#ifndef NOTHREAD + twist(log_lock, TO, 0); + free_lock(log_lock); + log_lock = NULL; +#endif + log_tail = NULL; + } +} + +/* show entries until no more, free log */ +local void log_dump(void) +{ + if (log_tail == NULL) + return; + while (log_show()) + ; + log_free(); +} + +/* debugging macro */ +#define Trace(x) \ + do { \ + if (verbosity > 2) { \ + log_add x; \ + } \ + } while (0) + +#else /* !DEBUG */ + +#define log_dump() +#define Trace(x) + +#endif + +/* read up to len bytes into buf, repeating read() calls as needed */ +local size_t readn(int desc, unsigned char *buf, size_t len) +{ + ssize_t ret; + size_t got; + + got = 0; + while (len) { + ret = read(desc, buf, len); + if (ret < 0) + bail("read error on ", in); + if (ret == 0) + break; + buf += ret; + len -= ret; + got += ret; + } + return got; +} + +/* write len bytes, repeating write() calls as needed */ +local void writen(int desc, unsigned char *buf, size_t len) +{ + ssize_t ret; + + while (len) { + ret = write(desc, buf, len); + if (ret < 1) + fprintf(stderr, "write error code %d\n", errno); + if (ret < 1) + bail("write error on ", out); + buf += ret; + len -= ret; + } +} + +/* sliding dictionary size for deflate */ +#define DICT 32768U + +/* largest power of 2 that fits in an unsigned int -- used to limit requests + to zlib functions that use unsigned int lengths */ +#define MAX ((((unsigned)0 - 1) >> 1) + 1) + +/* convert Unix time to MS-DOS date and time, assuming current timezone + (you got a better idea?) */ +local unsigned long time2dos(time_t t) +{ + struct tm *tm; + unsigned long dos; + + if (t == 0) + t = time(NULL); + tm = localtime(&t); + if (tm->tm_year < 80 || tm->tm_year > 207) + return 0; + dos = (tm->tm_year - 80) << 25; + dos += (tm->tm_mon + 1) << 21; + dos += tm->tm_mday << 16; + dos += tm->tm_hour << 11; + dos += tm->tm_min << 5; + dos += (tm->tm_sec + 1) >> 1; /* round to double-seconds */ + return dos; +} + +/* put a 4-byte integer into a byte array in LSB order or MSB order */ +#define PUT2L(a,b) (*(a)=(b)&0xff,(a)[1]=(b)>>8) +#define PUT4L(a,b) (PUT2L(a,(b)&0xffff),PUT2L((a)+2,(b)>>16)) +#define PUT4M(a,b) (*(a)=(b)>>24,(a)[1]=(b)>>16,(a)[2]=(b)>>8,(a)[3]=(b)) + +/* write a gzip, zlib, or zip header using the information in the globals */ +local unsigned long put_header(void) +{ + unsigned long len; + unsigned char head[30]; + + if (form > 1) { /* zip */ + /* write local header */ + PUT4L(head, 0x04034b50UL); /* local header signature */ + PUT2L(head + 4, 20); /* version needed to extract (2.0) */ + PUT2L(head + 6, 8); /* flags: data descriptor follows data */ + PUT2L(head + 8, 8); /* deflate */ + PUT4L(head + 10, time2dos(mtime)); + PUT4L(head + 14, 0); /* crc (not here) */ + PUT4L(head + 18, 0); /* compressed length (not here) */ + PUT4L(head + 22, 0); /* uncompressed length (not here) */ + PUT2L(head + 26, name == NULL ? 1 : strlen(name)); /* name length */ + PUT2L(head + 28, 9); /* length of extra field (see below) */ + writen(outd, head, 30); /* write local header */ + len = 30; + + /* write file name (use "-" for stdin) */ + if (name == NULL) + writen(outd, (unsigned char *)"-", 1); + else + writen(outd, (unsigned char *)name, strlen(name)); + len += name == NULL ? 1 : strlen(name); + + /* write extended timestamp extra field block (9 bytes) */ + PUT2L(head, 0x5455); /* extended timestamp signature */ + PUT2L(head + 2, 5); /* number of data bytes in this block */ + head[4] = 1; /* flag presence of mod time */ + PUT4L(head + 5, mtime); /* mod time */ + writen(outd, head, 9); /* write extra field block */ + len += 9; + } + else if (form) { /* zlib */ + head[0] = 0x78; /* deflate, 32K window */ + head[1] = (level == 9 ? 3 : (level == 1 ? 0 : + (level >= 6 || level == Z_DEFAULT_COMPRESSION ? 1 : 2))) << 6; + head[1] += 31 - (((head[0] << 8) + head[1]) % 31); + writen(outd, head, 2); + len = 2; + } + else { /* gzip */ + head[0] = 31; + head[1] = 139; + head[2] = 8; /* deflate */ + head[3] = name != NULL ? 8 : 0; + PUT4L(head + 4, mtime); + head[8] = level == 9 ? 2 : (level == 1 ? 4 : 0); + head[9] = 3; /* unix */ + writen(outd, head, 10); + len = 10; + if (name != NULL) + writen(outd, (unsigned char *)name, strlen(name) + 1); + if (name != NULL) + len += strlen(name) + 1; + } + return len; +} + +/* write a gzip, zlib, or zip trailer */ +local void put_trailer(unsigned long ulen, unsigned long clen, + unsigned long check, unsigned long head) +{ + unsigned char tail[46]; + + if (form > 1) { /* zip */ + unsigned long cent; + + /* write data descriptor (as promised in local header) */ + PUT4L(tail, check); + PUT4L(tail + 4, clen); + PUT4L(tail + 8, ulen); + writen(outd, tail, 12); + + /* write central file header */ + PUT4L(tail, 0x02014b50UL); /* central header signature */ + tail[4] = 63; /* obeyed version 6.3 of the zip spec */ + tail[5] = 255; /* ignore external attributes */ + PUT2L(tail + 6, 20); /* version needed to extract (2.0) */ + PUT2L(tail + 8, 8); /* data descriptor is present */ + PUT2L(tail + 10, 8); /* deflate */ + PUT4L(tail + 12, time2dos(mtime)); + PUT4L(tail + 16, check); /* crc */ + PUT4L(tail + 20, clen); /* compressed length */ + PUT4L(tail + 24, ulen); /* uncompressed length */ + PUT2L(tail + 28, name == NULL ? 1 : strlen(name)); /* name length */ + PUT2L(tail + 30, 9); /* length of extra field (see below) */ + PUT2L(tail + 32, 0); /* no file comment */ + PUT2L(tail + 34, 0); /* disk number 0 */ + PUT2L(tail + 36, 0); /* internal file attributes */ + PUT4L(tail + 38, 0); /* external file attributes (ignored) */ + PUT4L(tail + 42, 0); /* offset of local header */ + writen(outd, tail, 46); /* write central file header */ + cent = 46; + + /* write file name (use "-" for stdin) */ + if (name == NULL) + writen(outd, (unsigned char *)"-", 1); + else + writen(outd, (unsigned char *)name, strlen(name)); + cent += name == NULL ? 1 : strlen(name); + + /* write extended timestamp extra field block (9 bytes) */ + PUT2L(tail, 0x5455); /* extended timestamp signature */ + PUT2L(tail + 2, 5); /* number of data bytes in this block */ + tail[4] = 1; /* flag presence of mod time */ + PUT4L(tail + 5, mtime); /* mod time */ + writen(outd, tail, 9); /* write extra field block */ + cent += 9; + + /* write end of central directory record */ + PUT4L(tail, 0x06054b50UL); /* end of central directory signature */ + PUT2L(tail + 4, 0); /* number of this disk */ + PUT2L(tail + 6, 0); /* disk with start of central directory */ + PUT2L(tail + 8, 1); /* number of entries on this disk */ + PUT2L(tail + 10, 1); /* total number of entries */ + PUT4L(tail + 12, cent); /* size of central directory */ + PUT4L(tail + 16, head + clen + 12); /* offset of central directory */ + PUT2L(tail + 20, 0); /* no zip file comment */ + writen(outd, tail, 22); /* write end of central directory record */ + } + else if (form) { /* zlib */ + PUT4M(tail, check); + writen(outd, tail, 4); + } + else { /* gzip */ + PUT4L(tail, check); + PUT4L(tail + 4, ulen); + writen(outd, tail, 8); + } +} + +/* compute check value depending on format */ +#define CHECK(a,b,c) (form == 1 ? adler32(a,b,c) : crc32(a,b,c)) + +#ifndef NOTHREAD +/* -- threaded portions of pigz -- */ + +/* -- check value combination routines for parallel calculation -- */ + +#define COMB(a,b,c) (form == 1 ? adler32_comb(a,b,c) : crc32_comb(a,b,c)) +/* combine two crc-32's or two adler-32's (copied from zlib 1.2.3 so that pigz + can be compatible with older versions of zlib) */ + +/* we copy the combination routines from zlib here, in order to avoid + linkage issues with the zlib 1.2.3 builds on Sun, Ubuntu, and others */ + +local unsigned long gf2_matrix_times(unsigned long *mat, unsigned long vec) +{ + unsigned long sum; + + sum = 0; + while (vec) { + if (vec & 1) + sum ^= *mat; + vec >>= 1; + mat++; + } + return sum; +} + +local void gf2_matrix_square(unsigned long *square, unsigned long *mat) +{ + int n; + + for (n = 0; n < 32; n++) + square[n] = gf2_matrix_times(mat, mat[n]); +} + +local unsigned long crc32_comb(unsigned long crc1, unsigned long crc2, + size_t len2) +{ + int n; + unsigned long row; + unsigned long even[32]; /* even-power-of-two zeros operator */ + unsigned long odd[32]; /* odd-power-of-two zeros operator */ + + /* degenerate case */ + if (len2 == 0) + return crc1; + + /* put operator for one zero bit in odd */ + odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ + row = 1; + for (n = 1; n < 32; n++) { + odd[n] = row; + row <<= 1; + } + + /* put operator for two zero bits in even */ + gf2_matrix_square(even, odd); + + /* put operator for four zero bits in odd */ + gf2_matrix_square(odd, even); + + /* apply len2 zeros to crc1 (first square will put the operator for one + zero byte, eight zero bits, in even) */ + do { + /* apply zeros operator for this bit of len2 */ + gf2_matrix_square(even, odd); + if (len2 & 1) + crc1 = gf2_matrix_times(even, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + if (len2 == 0) + break; + + /* another iteration of the loop with odd and even swapped */ + gf2_matrix_square(odd, even); + if (len2 & 1) + crc1 = gf2_matrix_times(odd, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + } while (len2 != 0); + + /* return combined crc */ + crc1 ^= crc2; + return crc1; +} + +#define BASE 65521U /* largest prime smaller than 65536 */ +#define LOW16 0xffff /* mask lower 16 bits */ + +local unsigned long adler32_comb(unsigned long adler1, unsigned long adler2, + size_t len2) +{ + unsigned long sum1; + unsigned long sum2; + unsigned rem; + + /* the derivation of this formula is left as an exercise for the reader */ + rem = (unsigned)(len2 % BASE); + sum1 = adler1 & LOW16; + sum2 = (rem * sum1) % BASE; + sum1 += (adler2 & LOW16) + BASE - 1; + sum2 += ((adler1 >> 16) & LOW16) + ((adler2 >> 16) & LOW16) + BASE - rem; + if (sum1 >= BASE) sum1 -= BASE; + if (sum1 >= BASE) sum1 -= BASE; + if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1); + if (sum2 >= BASE) sum2 -= BASE; + return sum1 | (sum2 << 16); +} + +/* -- pool of spaces for buffer management -- */ + +/* These routines manage a pool of spaces. Each pool specifies a fixed size + buffer to be contained in each space. Each space has a use count, which + when decremented to zero returns the space to the pool. If a space is + requested from the pool and the pool is empty, a space is immediately + created unless a specified limit on the number of spaces has been reached. + Only if the limit is reached will it wait for a space to be returned to the + pool. Each space knows what pool it belongs to, so that it can be returned. + */ + +/* a space (one buffer for each space) */ +struct space { + lock *use; /* use count -- return to pool when zero */ + void *buf; /* buffer of size pool->size */ + size_t len; /* for application usage */ + struct pool *pool; /* pool to return to */ + struct space *next; /* for pool linked list */ +}; + +/* pool of spaces (one pool for each size needed) */ +struct pool { + lock *have; /* unused spaces available, lock for list */ + struct space *head; /* linked list of available buffers */ + size_t size; /* size of all buffers in this pool */ + int limit; /* number of new spaces allowed, or -1 */ + int made; /* number of buffers made */ +}; + +/* initialize a pool (pool structure itself provided, not allocated) -- the + limit is the maximum number of spaces in the pool, or -1 to indicate no + limit, i.e., to never wait for a buffer to return to the pool */ +local void new_pool(struct pool *pool, size_t size, int limit) +{ + pool->have = new_lock(0); + pool->head = NULL; + pool->size = size; + pool->limit = limit; + pool->made = 0; +} + +/* get a space from a pool -- the use count is initially set to one, so there + is no need to call use_space() for the first use */ +local struct space *get_space(struct pool *pool) +{ + struct space *space; + + /* if can't create any more, wait for a space to show up */ + possess(pool->have); + if (pool->limit == 0) + wait_for(pool->have, NOT_TO_BE, 0); + + /* if a space is available, pull it from the list and return it */ + if (pool->head != NULL) { + space = pool->head; + possess(space->use); + pool->head = space->next; + twist(pool->have, BY, -1); /* one less in pool */ + twist(space->use, TO, 1); /* initially one user */ + return space; + } + + /* nothing available, don't want to wait, make a new space */ + assert(pool->limit != 0); + if (pool->limit > 0) + pool->limit--; + pool->made++; + release(pool->have); + space = malloc(sizeof(struct space)); + if (space == NULL) + bail("not enough memory", ""); + space->use = new_lock(1); /* initially one user */ + space->buf = malloc(pool->size); + if (space->buf == NULL) + bail("not enough memory", ""); + space->pool = pool; /* remember the pool this belongs to */ + return space; +} + +/* increment the use count to require one more drop before returning this space + to the pool */ +local void use_space(struct space *space) +{ + possess(space->use); + twist(space->use, BY, +1); +} + +/* drop a space, returning it to the pool if the use count is zero */ +local void drop_space(struct space *space) +{ + int use; + struct pool *pool; + + possess(space->use); + use = peek_lock(space->use); + assert(use != 0); + if (use == 1) { + pool = space->pool; + possess(pool->have); + space->next = pool->head; + pool->head = space; + twist(pool->have, BY, +1); + } + twist(space->use, BY, -1); +} + +/* free the memory and lock resources of a pool -- return number of spaces for + debugging and resource usage measurement */ +local int free_pool(struct pool *pool) +{ + int count; + struct space *space; + + possess(pool->have); + count = 0; + while ((space = pool->head) != NULL) { + pool->head = space->next; + free(space->buf); + free_lock(space->use); + free(space); + count++; + } + release(pool->have); + free_lock(pool->have); + assert(count == pool->made); + return count; +} + +/* input and output buffer pools */ +local struct pool in_pool; +local struct pool out_pool; + +/* -- parallel compression -- */ + +/* compress or write job (passed from compress list to write list) -- if seq is + equal to -1, compress_thread is instructed to return; if more is false then + this is the last chunk, which after writing tells write_thread to return */ +struct job { + long seq; /* sequence number */ + int more; /* true if this is not the last chunk */ + struct space *in; /* input data to compress */ + struct space *out; /* dictionary or resulting compressed data */ + unsigned long check; /* check value for input data */ + lock *calc; /* released when check calculation complete */ + struct job *next; /* next job in the list (either list) */ +}; + +/* list of compress jobs (with tail for appending to list) */ +local lock *compress_have = NULL; /* number of compress jobs waiting */ +local struct job *compress_head, **compress_tail; + +/* list of write jobs */ +local lock *write_first; /* lowest sequence number in list */ +local struct job *write_head; + +/* number of compression threads running */ +local int cthreads = 0; + +/* write thread if running */ +local thread *writeth = NULL; + +/* setup job lists (call from main thread) */ +local void setup_jobs(void) +{ + /* set up only if not already set up*/ + if (compress_have != NULL) + return; + + /* allocate locks and initialize lists */ + compress_have = new_lock(0); + compress_head = NULL; + compress_tail = &compress_head; + write_first = new_lock(-1); + write_head = NULL; + + /* initialize buffer pools */ + new_pool(&in_pool, size, (procs << 1) + 2); + new_pool(&out_pool, size + (size >> 11) + 10, -1); +} + +/* command the compress threads to all return, then join them all (call from + main thread), free all the thread-related resources */ +local void finish_jobs(void) +{ + struct job job; + int caught; + + /* only do this once */ + if (compress_have == NULL) + return; + + /* command all of the extant compress threads to return */ + possess(compress_have); + job.seq = -1; + job.next = NULL; + compress_head = &job; + compress_tail = &(job.next); + twist(compress_have, BY, +1); /* will wake them all up */ + + /* join all of the compress threads, verify they all came back */ + caught = join_all(); + Trace(("-- joined %d compress threads", caught)); + assert(caught == cthreads); + cthreads = 0; + + /* free the resources */ + caught = free_pool(&out_pool); + Trace(("-- freed %d output buffers", caught)); + caught = free_pool(&in_pool); + Trace(("-- freed %d input buffers", caught)); + free_lock(write_first); + free_lock(compress_have); + compress_have = NULL; +} + +/* get the next compression job from the head of the list, compress and compute + the check value on the input, and put a job in the write list with the + results -- keep looking for more jobs, returning when a job is found with a + sequence number of -1 (leave that job in the list for other incarnations to + find) */ +local void compress_thread(void *dummy) +{ + struct job *job; /* job pulled and working on */ + struct job *here, **prior; /* pointers for inserting in write list */ + unsigned long check; /* check value of input */ + unsigned char *next; /* pointer for check value data */ + size_t len; /* remaining bytes to compress/check */ + z_stream strm; /* deflate stream */ + + (void)dummy; + + /* initialize the deflate stream for this thread */ + strm.zfree = Z_NULL; + strm.zalloc = Z_NULL; + strm.opaque = Z_NULL; + if (deflateInit2(&strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY) != + Z_OK) + bail("not enough memory", ""); + + /* keep looking for work */ + for (;;) { + /* get a job (like I tell my son) */ + possess(compress_have); + wait_for(compress_have, NOT_TO_BE, 0); + job = compress_head; + assert(job != NULL); + if (job->seq == -1) + break; + compress_head = job->next; + if (job->next == NULL) + compress_tail = &compress_head; + twist(compress_have, BY, -1); + + /* got a job -- initialize and set the compression level (note that if + deflateParams() is called immediately after deflateReset(), there is + no need to initialize the input/output for the stream) */ + Trace(("-- compressing #%ld", job->seq)); + (void)deflateReset(&strm); + (void)deflateParams(&strm, level, Z_DEFAULT_STRATEGY); + + /* set dictionary if provided, release that input buffer (only provided + if dict is true and if this is not the first work unit) -- the + amount of data in the buffer is assured to be >= DICT */ + if (job->out != NULL) { + len = job->out->len; + deflateSetDictionary(&strm, + (unsigned char *)(job->out->buf) + (len - DICT), DICT); + drop_space(job->out); + } + + /* set up input and output (the output size is assured to be big enough + for the worst case expansion of the input buffer size, plus five + bytes for the terminating stored block) */ + job->out = get_space(&out_pool); + strm.next_in = job->in->buf; + strm.next_out = job->out->buf; + + /* run MAX-sized amounts of input through deflate -- this loop is + needed for those cases where the integer type is smaller than the + size_t type, or when len is close to the limit of the size_t type */ + len = job->in->len; + while (len > MAX) { + strm.avail_in = MAX; + strm.avail_out = (unsigned)-1; + (void)deflate(&strm, Z_NO_FLUSH); + assert(strm.avail_in == 0 && strm.avail_out != 0); + len -= MAX; + } + + /* run the last piece through deflate -- terminate with a sync marker, + or finish deflate stream if this is the last block */ + strm.avail_in = (unsigned)len; + strm.avail_out = (unsigned)-1; + (void)deflate(&strm, job->more ? Z_SYNC_FLUSH : Z_FINISH); + assert(strm.avail_in == 0 && strm.avail_out != 0); + job->out->len = strm.next_out - (unsigned char *)(job->out->buf); + Trace(("-- compressed #%ld%s", job->seq, job->more ? "" : " (last)")); + + /* reserve input buffer until check value has been calculated */ + use_space(job->in); + + /* insert write job in list in sorted order, alert write thread */ + possess(write_first); + prior = &write_head; + while ((here = *prior) != NULL) { + if (here->seq > job->seq) + break; + prior = &(here->next); + } + job->next = here; + *prior = job; + twist(write_first, TO, write_head->seq); + + /* calculate the check value in parallel with writing, alert the write + thread that the calculation is complete, and drop this usage of the + input buffer */ + len = job->in->len; + next = job->in->buf; + check = CHECK(0L, Z_NULL, 0); + while (len > MAX) { + check = CHECK(check, next, MAX); + len -= MAX; + next += MAX; + } + check = CHECK(check, next, (unsigned)len); + drop_space(job->in); + job->check = check; + possess(job->calc); + twist(job->calc, TO, 1); + Trace(("-- checked #%ld%s", job->seq, job->more ? "" : " (last)")); + + /* done with that one -- go find another job */ + } + + /* found job with seq == -1 -- free deflate memory and return to join */ + release(compress_have); + deflateEnd(&strm); +} + +/* collect the write jobs off of the list in sequence order and write out the + compressed data until the last chunk is written -- also write the header and + trailer and combine the individual check values of the input buffers */ +local void write_thread(void *dummy) +{ + long seq; /* next sequence number looking for */ + struct job *job; /* job pulled and working on */ + size_t len; /* input length */ + int more; /* true if more chunks to write */ + unsigned long head; /* header length */ + unsigned long ulen; /* total uncompressed size (overflow ok) */ + unsigned long clen; /* total compressed size (overflow ok) */ + unsigned long check; /* check value of uncompressed data */ + + (void)dummy; + + /* build and write header */ + Trace(("-- write thread running")); + head = put_header(); + + /* process output of compress threads until end of input */ + ulen = clen = 0; + check = CHECK(0L, Z_NULL, 0); + seq = 0; + do { + /* get next write job in order */ + possess(write_first); + wait_for(write_first, TO_BE, seq); + job = write_head; + write_head = job->next; + twist(write_first, TO, write_head == NULL ? -1 : write_head->seq); + + /* update lengths, save uncompressed length for COMB */ + more = job->more; + len = job->in->len; + drop_space(job->in); + ulen += (unsigned long)len; + clen += (unsigned long)(job->out->len); + + /* write the compressed data and drop the output buffer */ + Trace(("-- writing #%ld", seq)); + writen(outd, job->out->buf, job->out->len); + drop_space(job->out); + Trace(("-- wrote #%ld%s", seq, more ? "" : " (last)")); + + /* wait for check calculation to complete, then combine, once + the compress thread is done with the input, release it */ + possess(job->calc); + wait_for(job->calc, TO_BE, 1); + release(job->calc); + check = COMB(check, job->check, len); + + /* free the job */ + free_lock(job->calc); + free(job); + + /* get the next buffer in sequence */ + seq++; + } while (more); + + /* write trailer */ + put_trailer(ulen, clen, check, head); + + /* verify no more jobs, prepare for next use */ + possess(compress_have); + assert(compress_head == NULL && peek_lock(compress_have) == 0); + release(compress_have); + possess(write_first); + assert(write_head == NULL); + twist(write_first, TO, -1); +} + +/* compress ind to outd, using multiple threads for the compression and check + value calculations and one other thread for writing the output -- compress + threads will be launched and left running (waiting actually) to support + subsequent calls of parallel_compress() */ +local void parallel_compress(void) +{ + long seq; /* sequence number */ + struct space *prev; /* previous input space */ + struct space *next; /* next input space */ + struct job *job; /* job for compress, then write */ + int more; /* true if more input to read */ + + /* if first time or after an option change, setup the job lists */ + setup_jobs(); + + /* start write thread */ + writeth = launch(write_thread, NULL); + + /* read from input and start compress threads (write thread will pick up + the output of the compress threads) */ + seq = 0; + prev = NULL; + next = get_space(&in_pool); + next->len = readn(ind, next->buf, next->pool->size); + do { + /* create a new job, use next input chunk, previous as dictionary */ + job = malloc(sizeof(struct job)); + if (job == NULL) + bail("not enough memory", ""); + job->seq = seq; + job->in = next; + job->out = dict ? prev : NULL; /* dictionary for compression */ + job->calc = new_lock(0); + + /* check for end of file, reading next chunk if not sure */ + if (next->len < next->pool->size) + more = 0; + else { + next = get_space(&in_pool); + next->len = readn(ind, next->buf, next->pool->size); + more = next->len != 0; + if (!more) + drop_space(next); /* won't be using it */ + if (dict && more) { + use_space(job->in); /* hold as dictionary for next loop */ + prev = job->in; + } + } + job->more = more; + Trace(("-- read #%ld%s", seq, more ? "" : " (last)")); + if (++seq < 1) + bail("input too long: ", in); + + /* start another compress thread if needed */ + if (cthreads < seq && cthreads < procs) { + (void)launch(compress_thread, NULL); + cthreads++; + } + + /* put job at end of compress list, let all the compressors know */ + possess(compress_have); + job->next = NULL; + *compress_tail = job; + compress_tail = &(job->next); + twist(compress_have, BY, +1); + + /* do until end of input */ + } while (more); + + /* wait for the write thread to complete (we leave the compress threads out + there and waiting in case there is another stream to compress) */ + join(writeth); + writeth = NULL; + Trace(("-- write thread joined")); +} + +#endif + +/* do a simple compression in a single thread from ind to outd -- if reset is + true, instead free the memory that was allocated and retained for input, + output, and deflate */ +local void single_compress(int reset) +{ + size_t got; /* amount read */ + size_t more; /* amount of next read (0 if eof) */ + unsigned long head; /* header length */ + unsigned long ulen; /* total uncompressed size (overflow ok) */ + unsigned long clen; /* total compressed size (overflow ok) */ + unsigned long check; /* check value of uncompressed data */ + static unsigned out_size; /* size of output buffer */ + static unsigned char *in, *next, *out; /* reused i/o buffers */ + static z_stream *strm = NULL; /* reused deflate structure */ + + /* if requested, just release the allocations and return */ + if (reset) { + if (strm != NULL) { + deflateEnd(strm); + free(strm); + free(out); + free(next); + free(in); + strm = NULL; + } + return; + } + + /* initialize the deflate structure if this is the first time */ + if (strm == NULL) { + out_size = size > MAX ? MAX : (unsigned)size; + if ((in = malloc(size)) == NULL || + (next = malloc(size)) == NULL || + (out = malloc(out_size)) == NULL || + (strm = malloc(sizeof(z_stream))) == NULL) + bail("not enough memory", ""); + strm->zfree = Z_NULL; + strm->zalloc = Z_NULL; + strm->opaque = Z_NULL; + if (deflateInit2(strm, level, Z_DEFLATED, -15, 8, + Z_DEFAULT_STRATEGY) != Z_OK) + bail("not enough memory", ""); + } + + /* write header */ + head = put_header(); + + /* set compression level in case it changed */ + (void)deflateReset(strm); + (void)deflateParams(strm, level, Z_DEFAULT_STRATEGY); + + /* do raw deflate and calculate check value */ + ulen = clen = 0; + check = CHECK(0L, Z_NULL, 0); + more = readn(ind, next, size); + do { + /* get data to compress, see if there is any more input */ + got = more; + { unsigned char *temp; temp = in; in = next; next = temp; } + more = got < size ? 0 : readn(ind, next, size); + ulen += (unsigned long)got; + strm->next_in = in; + + /* compress MAX-size chunks in case unsigned type is small */ + while (got > MAX) { + strm->avail_in = MAX; + check = CHECK(check, strm->next_in, strm->avail_in); + do { + strm->avail_out = out_size; + strm->next_out = out; + (void)deflate(strm, Z_NO_FLUSH); + writen(outd, out, out_size - strm->avail_out); + clen += out_size - strm->avail_out; + } while (strm->avail_out == 0); + assert(strm->avail_in == 0); + got -= MAX; + } + + /* compress the remainder, finishing if end of input -- when not -i, + use a Z_SYNC_FLUSH so that this and parallel compression produce the + same output */ + strm->avail_in = (unsigned)got; + check = CHECK(check, strm->next_in, strm->avail_in); + do { + strm->avail_out = out_size; + strm->next_out = out; + (void)deflate(strm, + more ? (dict ? Z_SYNC_FLUSH : Z_FULL_FLUSH) : Z_FINISH); + writen(outd, out, out_size - strm->avail_out); + clen += out_size - strm->avail_out; + } while (strm->avail_out == 0); + assert(strm->avail_in == 0); + + /* do until no more input */ + } while (more); + + /* write trailer */ + put_trailer(ulen, clen, check, head); +} + +/* --- decompression --- */ + +/* globals for decompression and listing buffered reading */ +#define BUF 32768U /* input buffer size */ +local unsigned char in_buf[BUF]; /* input buffer */ +local unsigned char *in_next; /* next unused byte in buffer */ +local size_t in_left; /* number of unused bytes in buffer */ +local int in_eof; /* true if reached end of file on input */ +local int in_short; /* true if last read didn't fill buffer */ +local off_t in_tot; /* total bytes read from input */ +local off_t out_tot; /* total bytes written to output */ +local unsigned long out_check; /* check value of output */ + +#ifndef NOTHREAD +/* parallel reading */ + +local unsigned char in_buf2[BUF]; /* second buffer for parallel reads */ +local size_t in_len; /* data waiting in next buffer */ +local int in_which; /* -1: start, 0: in_buf2, 1: in_buf */ +local lock *load_state; /* value = 0 to wait, 1 to read a buffer */ +local thread *load_thread; /* load_read() thread for joining */ + +/* parallel read thread */ +local void load_read(void *dummy) +{ + size_t len; + + (void)dummy; + + Trace(("-- launched decompress read thread")); + do { + possess(load_state); + wait_for(load_state, TO_BE, 1); + in_len = len = readn(ind, in_which ? in_buf : in_buf2, BUF); + Trace(("-- decompress read thread read %lu bytes", len)); + twist(load_state, TO, 0); + } while (len == BUF); + Trace(("-- exited decompress read thread")); +} + +#endif + +/* load() is called when in_left has gone to zero in order to provide more + input data: load the input buffer with BUF or less bytes (less if at end of + file) from the file ind, set in_next to point to the in_left bytes read, + update in_tot, and return in_left -- in_eof is set to true when in_left has + gone to zero and there is no more data left to read from ind */ +local size_t load(void) +{ + /* if already detected end of file, do nothing */ + if (in_short) { + in_eof = 1; + return 0; + } + +#ifndef NOTHREAD + /* if first time in or procs == 1, read a buffer to have something to + return, otherwise wait for the previous read job to complete */ + if (procs > 1) { + /* if first time, fire up the read thread, ask for a read */ + if (in_which == -1) { + in_which = 1; + load_state = new_lock(1); + load_thread = launch(load_read, NULL); + } + + /* wait for the previously requested read to complete */ + possess(load_state); + wait_for(load_state, TO_BE, 0); + release(load_state); + + /* set up input buffer with the data just read */ + in_next = in_which ? in_buf : in_buf2; + in_left = in_len; + + /* if not at end of file, alert read thread to load next buffer, + alternate between in_buf and in_buf2 */ + if (in_len == BUF) { + in_which = 1 - in_which; + possess(load_state); + twist(load_state, TO, 1); + } + + /* at end of file -- join read thread (already exited), clean up */ + else { + join(load_thread); + free_lock(load_state); + in_which = -1; + } + } + else +#endif + { + /* don't use threads -- simply read a buffer into in_buf */ + in_left = readn(ind, in_next = in_buf, BUF); + } + + /* note end of file */ + if (in_left < BUF) { + in_short = 1; + + /* if we got bupkis, now is the time to mark eof */ + if (in_left == 0) + in_eof = 1; + } + + /* update the total and return the available bytes */ + in_tot += in_left; + return in_left; +} + +/* initialize for reading new input */ +local void in_init(void) +{ + in_left = 0; + in_eof = 0; + in_short = 0; + in_tot = 0; +#ifndef NOTHREAD + in_which = -1; +#endif +} + +/* buffered reading macros for decompression and listing */ +#define GET() (in_eof || (in_left == 0 && load() == 0) ? EOF : \ + (in_left--, *in_next++)) +#define GET2() (tmp2 = GET(), tmp2 + (GET() << 8)) +#define GET4() (tmp4 = GET2(), tmp4 + ((unsigned long)(GET2()) << 16)) +#define SKIP(dist) \ + do { \ + size_t togo = (dist); \ + while (togo > in_left) { \ + togo -= in_left; \ + if (load() == 0) \ + return -1; \ + } \ + in_left -= togo; \ + in_next += togo; \ + } while (0) + +/* convert MS-DOS date and time to a Unix time, assuming current timezone + (you got a better idea?) */ +local time_t dos2time(unsigned long dos) +{ + struct tm tm; + + if (dos == 0) + return time(NULL); + tm.tm_year = ((int)(dos >> 25) & 0x7f) + 80; + tm.tm_mon = ((int)(dos >> 21) & 0xf) - 1; + tm.tm_mday = (int)(dos >> 16) & 0x1f; + tm.tm_hour = (int)(dos >> 11) & 0x1f; + tm.tm_min = (int)(dos >> 5) & 0x3f; + tm.tm_sec = (int)(dos << 1) & 0x3e; + tm.tm_isdst = -1; /* figure out if DST or not */ + return mktime(&tm); +} + +/* convert an unsigned 32-bit integer to signed, even if long > 32 bits */ +local long tolong(unsigned long val) +{ + return (long)(val & 0x7fffffffUL) - (long)(val & 0x80000000UL); +} + +#define LOW32 0xffffffffUL + +/* process zip extra field to extract zip64 lengths and Unix mod time */ +local int read_extra(unsigned len, int save) +{ + unsigned id, size, tmp2; + unsigned long tmp4; + + /* process extra blocks */ + while (len >= 4) { + id = GET2(); + size = GET2(); + if (in_eof) + return -1; + len -= 4; + if (size > len) + break; + len -= size; + if (id == 0x0001) { + /* Zip64 Extended Information Extra Field */ + if (zip_ulen == LOW32 && size >= 8) { + zip_ulen = GET4(); + SKIP(4); + size -= 8; + } + if (zip_clen == LOW32 && size >= 8) { + zip_clen = GET4(); + SKIP(4); + size -= 8; + } + } + if (save) { + if ((id == 0x000d || id == 0x5855) && size >= 8) { + /* PKWare Unix or Info-ZIP Type 1 Unix block */ + SKIP(4); + stamp = tolong(GET4()); + size -= 8; + } + if (id == 0x5455 && size >= 5) { + /* Extended Timestamp block */ + size--; + if (GET() & 1) { + stamp = tolong(GET4()); + size -= 4; + } + } + } + SKIP(size); + } + SKIP(len); + return 0; +} + +/* read a gzip, zip, zlib, or lzw header from ind and extract useful + information, return the method -- or on error return negative: -1 is + immediate EOF, -2 is not a recognized compressed format, -3 is premature EOF + within the header, -4 is unexpected header flag values; a method of 256 is + lzw -- set form to indicate gzip, zlib, or zip */ +local int get_header(int save) +{ + unsigned magic; /* magic header */ + int method; /* compression method */ + int flags; /* header flags */ + unsigned fname, extra; /* name and extra field lengths */ + unsigned tmp2; /* for macro */ + unsigned long tmp4; /* for macro */ + + /* clear return information */ + if (save) { + stamp = 0; + RELEASE(hname); + } + + /* see if it's a gzip, zlib, or lzw file */ + form = 0; + magic = GET() << 8; + if (in_eof) + return -1; + magic += GET(); + if (in_eof) + return -2; + if (magic % 31 == 0) { /* it's zlib */ + form = 1; + return (int)((magic >> 8) & 0xf); + } + if (magic == 0x1f9d) /* it's lzw */ + return 256; + if (magic == 0x504b) { /* it's zip */ + if (GET() != 3 || GET() != 4) + return -3; + SKIP(2); + flags = GET2(); + if (in_eof) + return -3; + if (flags & 0xfff0) + return -4; + method = GET2(); + if (flags & 1) /* encrypted */ + method = 255; /* mark as unknown method */ + if (in_eof) + return -3; + if (save) + stamp = dos2time(GET4()); + else + SKIP(4); + zip_crc = GET4(); + zip_clen = GET4(); + zip_ulen = GET4(); + fname = GET2(); + extra = GET2(); + if (save) { + char *next = hname = malloc(fname + 1); + if (hname == NULL) + bail("not enough memory", ""); + while (fname > in_left) { + memcpy(next, in_next, in_left); + fname -= in_left; + next += in_left; + if (load() == 0) + return -3; + } + memcpy(next, in_next, fname); + in_left -= fname; + in_next += fname; + next += fname; + *next = 0; + } + else + SKIP(fname); + read_extra(extra, save); + form = 2 + ((flags & 8) >> 3); + return in_eof ? -3 : method; + } + if (magic != 0x1f8b) /* not gzip */ + return -2; + + /* it's gzip -- get method and flags */ + method = GET(); + flags = GET(); + if (in_eof) + return -1; + if (flags & 0xe0) + return -4; + + /* get time stamp */ + if (save) + stamp = tolong(GET4()); + else + SKIP(4); + + /* skip extra field and OS */ + SKIP(2); + + /* skip extra field, if present */ + if (flags & 4) { + extra = GET2(); + if (in_eof) + return -3; + SKIP(extra); + } + + /* read file name, if present, into allocated memory */ + if ((flags & 8) && save) { + unsigned char *end; + size_t copy, have, size = 128; + hname = malloc(size); + if (hname == NULL) + bail("not enough memory", ""); + have = 0; + do { + if (in_left == 0 && load() == 0) + return -3; + end = memchr(in_next, 0, in_left); + copy = end == NULL ? in_left : (size_t)(end - in_next) + 1; + if (have + copy > size) { + while (have + copy > (size <<= 1)) + ; + hname = realloc(hname, size); + if (hname == NULL) + bail("not enough memory", ""); + } + memcpy(hname + have, in_next, copy); + have += copy; + in_left -= copy; + in_next += copy; + } while (end == NULL); + } + else if (flags & 8) + while (GET() != 0) + if (in_eof) + return -3; + + /* skip comment */ + if (flags & 16) + while (GET() != 0) + if (in_eof) + return -3; + + /* skip header crc */ + if (flags & 2) + SKIP(2); + + /* return compression method */ + return method; +} + +/* --- list contents of compressed input (gzip, zlib, or lzw) */ + +/* find standard compressed file suffix, return length of suffix */ +local size_t compressed_suffix(char *nm) +{ + size_t len; + + len = strlen(nm); + if (len > 4) { + nm += len - 4; + len = 4; + if (strcmp(nm, ".zip") == 0 || strcmp(nm, ".ZIP") == 0 || + strcmp(nm, ".tgz") == 0) + return 4; + } + if (len > 3) { + nm += len - 3; + len = 3; + if (strcmp(nm, ".gz") == 0 || strcmp(nm, "-gz") == 0 || + strcmp(nm, ".zz") == 0 || strcmp(nm, "-zz") == 0) + return 3; + } + if (len > 2) { + nm += len - 2; + if (strcmp(nm, ".z") == 0 || strcmp(nm, "-z") == 0 || + strcmp(nm, "_z") == 0 || strcmp(nm, ".Z") == 0) + return 2; + } + return 0; +} + +/* listing file name lengths for -l and -lv */ +#define NAMEMAX1 48 /* name display limit at verbosity 1 */ +#define NAMEMAX2 16 /* name display limit at verbosity 2 */ + +/* print gzip or lzw file information */ +local void show_info(int method, unsigned long check, off_t len, int cont) +{ + size_t max; /* maximum name length for current verbosity */ + size_t n; /* name length without suffix */ + time_t now; /* for getting current year */ + char mod[26]; /* modification time in text */ + char name[NAMEMAX1+1]; /* header or file name, possibly truncated */ + + /* create abbreviated name from header file name or actual file name */ + max = verbosity > 1 ? NAMEMAX2 : NAMEMAX1; + memset(name, 0, max + 1); + if (cont) + strncpy(name, "<...>", max + 1); + else if (hname == NULL) { + n = strlen(in) - compressed_suffix(in); + strncpy(name, in, n > max + 1 ? max + 1 : n); + } + else + strncpy(name, hname, max + 1); + if (name[max]) + strcpy(name + max - 3, "..."); + + /* convert time stamp to text */ + if (stamp) { + strcpy(mod, ctime(&stamp)); + now = time(NULL); + if (strcmp(mod + 20, ctime(&now) + 20) != 0) + strcpy(mod + 11, mod + 19); + } + else + strcpy(mod + 4, "------ -----"); + mod[16] = 0; + + /* if first time, print header */ + if (first) { + if (verbosity > 1) + fputs("method check timestamp ", stdout); + if (verbosity > 0) + puts("compressed original reduced name"); + first = 0; + } + + /* print information */ + if (verbosity > 1) { + if (form == 3 && !decode) + printf("zip%3d -------- %s ", method, mod + 4); + else if (form > 1) + printf("zip%3d %08lx %s ", method, check, mod + 4); + else if (form) + printf("zlib%2d %08lx %s ", method, check, mod + 4); + else if (method == 256) + printf("lzw -------- %s ", mod + 4); + else + printf("gzip%2d %08lx %s ", method, check, mod + 4); + } + if (verbosity > 0) { + if ((form == 3 && !decode) || + (method == 8 && in_tot > (len + (len >> 10) + 12)) || + (method == 256 && in_tot > len + (len >> 1) + 3)) + printf(sizeof(off_t) == 4 ? "%10lu %10lu? unk %s\n" : + "%10llu %10llu? unk %s\n", + in_tot, len, name); + else + printf(sizeof(off_t) == 4 ? "%10lu %10lu %6.1f%% %s\n" : + "%10llu %10llu %6.1f%% %s\n", + in_tot, len, + len == 0 ? 0 : 100 * (len - in_tot)/(double)len, + name); + } +} + +/* list content information about the gzip file at ind (only works if the gzip + file contains a single gzip stream with no junk at the end, and only works + well if the uncompressed length is less than 4 GB) */ +local void list_info(void) +{ + int method; /* get_header() return value */ + size_t n; /* available trailer bytes */ + off_t at; /* used to calculate compressed length */ + unsigned char tail[8]; /* trailer containing check and length */ + unsigned long check, len; /* check value and length from trailer */ + + /* initialize input buffer */ + in_init(); + + /* read header information and position input after header */ + method = get_header(1); + if (method < 0) { + RELEASE(hname); + if (method != -1 && verbosity > 1) + fprintf(stderr, "%s not a compressed file -- skipping\n", in); + return; + } + + /* list zip file */ + if (form > 1) { + in_tot = zip_clen; + show_info(method, zip_crc, zip_ulen, 0); + return; + } + + /* list zlib file */ + if (form) { + at = lseek(ind, 0, SEEK_END); + if (at == -1) { + check = 0; + do { + len = in_left < 4 ? in_left : 4; + in_next += in_left - len; + while (len--) + check = (check << 8) + *in_next++; + } while (load() != 0); + check &= LOW32; + } + else { + in_tot = at; + lseek(ind, -4, SEEK_END); + readn(ind, tail, 4); + check = (*tail << 24) + (tail[1] << 16) + (tail[2] << 8) + tail[3]; + } + in_tot -= 6; + show_info(method, check, 0, 0); + return; + } + + /* list lzw file */ + if (method == 256) { + at = lseek(ind, 0, SEEK_END); + if (at == -1) + while (load() != 0) + ; + else + in_tot = at; + in_tot -= 3; + show_info(method, 0, 0, 0); + return; + } + + /* skip to end to get trailer (8 bytes), compute compressed length */ + if (in_short) { /* whole thing already read */ + if (in_left < 8) { + if (verbosity > 0) + fprintf(stderr, "%s not a valid gzip file -- skipping\n", + in); + return; + } + in_tot = in_left - 8; /* compressed size */ + memcpy(tail, in_next + (in_left - 8), 8); + } + else if ((at = lseek(ind, -8, SEEK_END)) != -1) { + in_tot = at - in_tot + in_left; /* compressed size */ + readn(ind, tail, 8); /* get trailer */ + } + else { /* can't seek */ + at = in_tot - in_left; /* save header size */ + do { + n = in_left < 8 ? in_left : 8; + memcpy(tail, in_next + (in_left - n), n); + load(); + } while (in_left == BUF); /* read until end */ + if (in_left < 8) { + if (n + in_left < 8) { + if (verbosity > 0) + fprintf(stderr, "%s not a valid gzip file -- skipping\n", + in); + return; + } + if (in_left) { + if (n + in_left > 8) + memcpy(tail, tail + n - (8 - in_left), 8 - in_left); + memcpy(tail + 8 - in_left, in_next, in_left); + } + } + else + memcpy(tail, in_next + (in_left - 8), 8); + in_tot -= at + 8; + } + if (in_tot < 2) { + if (verbosity > 0) + fprintf(stderr, "%s not a valid gzip file -- skipping\n", in); + return; + } + + /* convert trailer to check and uncompressed length (modulo 2^32) */ + check = tail[0] + (tail[1] << 8) + (tail[2] << 16) + (tail[3] << 24); + len = tail[4] + (tail[5] << 8) + (tail[6] << 16) + (tail[7] << 24); + + /* list information about contents */ + show_info(method, check, len, 0); + RELEASE(hname); +} + +/* --- decompress deflate input --- */ + +/* call-back input function for inflateBack() */ +local unsigned inb(void *desc, unsigned char **buf) +{ + (void)desc; + load(); + *buf = in_next; + return in_left; +} + +/* output buffers and window for infchk() and unlzw() */ +#define OUTSIZE 32768U /* must be at least 32K for inflateBack() window */ +local unsigned char out_buf[OUTSIZE]; + +#ifndef NOTHREAD +/* output data for parallel write and check */ +local unsigned char out_copy[OUTSIZE]; +local size_t out_len; + +/* outb threads states */ +local lock *outb_write_more = NULL; +local lock *outb_check_more; + +/* output write thread */ +local void outb_write(void *dummy) +{ + size_t len; + + (void)dummy; + + Trace(("-- launched decompress write thread")); + do { + possess(outb_write_more); + wait_for(outb_write_more, TO_BE, 1); + len = out_len; + if (len && decode == 1) + writen(outd, out_copy, len); + Trace(("-- decompress wrote %lu bytes", len)); + twist(outb_write_more, TO, 0); + } while (len); + Trace(("-- exited decompress write thread")); +} + +/* output check thread */ +local void outb_check(void *dummy) +{ + size_t len; + + (void)dummy; + + Trace(("-- launched decompress check thread")); + do { + possess(outb_check_more); + wait_for(outb_check_more, TO_BE, 1); + len = out_len; + out_check = CHECK(out_check, out_copy, len); + Trace(("-- decompress checked %lu bytes", len)); + twist(outb_check_more, TO, 0); + } while (len); + Trace(("-- exited decompress check thread")); +} +#endif + +/* call-back output function for inflateBack() -- wait for the last write and + check calculation to complete, copy the write buffer, and then alert the + write and check threads and return for more decompression while that's + going on (or just write and check if no threads or if proc == 1) */ +local int outb(void *desc, unsigned char *buf, unsigned len) +{ +#ifndef NOTHREAD + static thread *wr, *ch; + + (void)desc; + + if (procs > 1) { + /* if first time, initialize state and launch threads */ + if (outb_write_more == NULL) { + outb_write_more = new_lock(0); + outb_check_more = new_lock(0); + wr = launch(outb_write, NULL); + ch = launch(outb_check, NULL); + } + + /* wait for previous write and check threads to complete */ + possess(outb_check_more); + wait_for(outb_check_more, TO_BE, 0); + possess(outb_write_more); + wait_for(outb_write_more, TO_BE, 0); + + /* copy the output and alert the worker bees */ + out_len = len; + out_tot += len; + memcpy(out_copy, buf, len); + twist(outb_write_more, TO, 1); + twist(outb_check_more, TO, 1); + + /* if requested with len == 0, clean up -- terminate and join write and + check threads, free lock */ + if (len == 0) { + join(ch); + join(wr); + free_lock(outb_check_more); + free_lock(outb_write_more); + outb_write_more = NULL; + } + + /* return for more decompression while last buffer is being written + and having its check value calculated -- we wait for those to finish + the next time this function is called */ + return 0; + } +#endif + + /* if just one process or no threads, then do it without threads */ + if (len) { + if (decode == 1) + writen(outd, buf, len); + out_check = CHECK(out_check, buf, len); + out_tot += len; + } + return 0; +} + +/* inflate for decompression or testing -- decompress from ind to outd unless + decode != 1, in which case just test ind, and then also list if list != 0; + look for and decode multiple, concatenated gzip and/or zlib streams; + read and check the gzip, zlib, or zip trailer */ +local void infchk(void) +{ + int ret, cont; + unsigned long check, len; + z_stream strm; + unsigned tmp2; + unsigned long tmp4; + off_t clen; + + cont = 0; + do { + /* header already read -- set up for decompression */ + in_tot = in_left; /* track compressed data length */ + out_tot = 0; + out_check = CHECK(0L, Z_NULL, 0); + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + ret = inflateBackInit(&strm, 15, out_buf); + if (ret != Z_OK) + bail("not enough memory", ""); + + /* decompress, compute lengths and check value */ + strm.avail_in = in_left; + strm.next_in = in_next; + ret = inflateBack(&strm, inb, NULL, outb, NULL); + if (ret != Z_STREAM_END) + bail("corrupted input -- invalid deflate data: ", in); + in_left = strm.avail_in; + in_next = strm.next_in; + inflateBackEnd(&strm); + outb(NULL, NULL, 0); /* finish off final write and check */ + + /* compute compressed data length */ + clen = in_tot - in_left; + + /* read and check trailer */ + if (form > 1) { /* zip local trailer (if any) */ + if (form == 3) { /* data descriptor follows */ + /* read original version of data descriptor*/ + zip_crc = GET4(); + zip_clen = GET4(); + zip_ulen = GET4(); + if (in_eof) + bail("corrupted zip entry -- missing trailer: ", in); + + /* if crc doesn't match, try info-zip variant with sig */ + if (zip_crc != out_check) { + if (zip_crc != 0x08074b50UL || zip_clen != out_check) + bail("corrupted zip entry -- crc32 mismatch: ", in); + zip_crc = zip_clen; + zip_clen = zip_ulen; + zip_ulen = GET4(); + } + + /* if second length doesn't match, try 64-bit lengths */ + if (zip_ulen != (out_tot & LOW32)) { + zip_ulen = GET4(); + (void)GET4(); + } + if (in_eof) + bail("corrupted zip entry -- missing trailer: ", in); + } + if (zip_clen != (clen & LOW32) || zip_ulen != (out_tot & LOW32)) + bail("corrupted zip entry -- length mismatch: ", in); + check = zip_crc; + } + else if (form == 1) { /* zlib (big-endian) trailer */ + check = (unsigned long)(GET()) << 24; + check += (unsigned long)(GET()) << 16; + check += GET() << 8; + check += GET(); + if (in_eof) + bail("corrupted zlib stream -- missing trailer: ", in); + if (check != out_check) + bail("corrupted zlib stream -- adler32 mismatch: ", in); + } + else { /* gzip trailer */ + check = GET4(); + len = GET4(); + if (in_eof) + bail("corrupted gzip stream -- missing trailer: ", in); + if (check != out_check) + bail("corrupted gzip stream -- crc32 mismatch: ", in); + if (len != (out_tot & LOW32)) + bail("corrupted gzip stream -- length mismatch: ", in); + } + + /* show file information if requested */ + if (list) { + in_tot = clen; + show_info(8, check, out_tot, cont); + cont = 1; + } + + /* if a gzip or zlib entry follows a gzip or zlib entry, decompress it + (don't replace saved header information from first entry) */ + } while (form < 2 && (ret = get_header(0)) == 8 && form < 2); + if (ret != -1 && form < 2) + fprintf(stderr, "%s OK, has trailing junk which was ignored\n", in); +} + +/* --- decompress Unix compress (LZW) input --- */ + +/* memory for unlzw() -- + the first 256 entries of prefix[] and suffix[] are never used, could + have offset the index, but it's faster to waste the memory */ +unsigned short prefix[65536]; /* index to LZW prefix string */ +unsigned char suffix[65536]; /* one-character LZW suffix */ +unsigned char match[65280 + 2]; /* buffer for reversed match */ + +/* throw out what's left in the current bits byte buffer (this is a vestigial + aspect of the compressed data format derived from an implementation that + made use of a special VAX machine instruction!) */ +#define FLUSHCODE() \ + do { \ + left = 0; \ + rem = 0; \ + if (chunk > in_left) { \ + chunk -= in_left; \ + if (load() == 0) \ + break; \ + if (chunk > in_left) { \ + chunk = in_left = 0; \ + break; \ + } \ + } \ + in_left -= chunk; \ + in_next += chunk; \ + chunk = 0; \ + } while (0) + +/* Decompress a compress (LZW) file from ind to outd. The compress magic + header (two bytes) has already been read and verified. */ +local void unlzw(void) +{ + int got; /* byte just read by GET() */ + unsigned chunk; /* bytes left in current chunk */ + int left; /* bits left in rem */ + unsigned rem; /* unused bits from input */ + int bits; /* current bits per code */ + unsigned code; /* code, table traversal index */ + unsigned mask; /* mask for current bits codes */ + int max; /* maximum bits per code for this stream */ + int flags; /* compress flags, then block compress flag */ + unsigned end; /* last valid entry in prefix/suffix tables */ + unsigned temp; /* current code */ + unsigned prev; /* previous code */ + unsigned final; /* last character written for previous code */ + unsigned stack; /* next position for reversed string */ + unsigned outcnt; /* bytes in output buffer */ + unsigned char *p; + + /* process remainder of compress header -- a flags byte */ + out_tot = 0; + flags = GET(); + if (in_eof) + bail("missing lzw data: ", in); + if (flags & 0x60) + bail("unknown lzw flags set: ", in); + max = flags & 0x1f; + if (max < 9 || max > 16) + bail("lzw bits out of range: ", in); + if (max == 9) /* 9 doesn't really mean 9 */ + max = 10; + flags &= 0x80; /* true if block compress */ + + /* clear table */ + bits = 9; + mask = 0x1ff; + end = flags ? 256 : 255; + + /* set up: get first 9-bit code, which is the first decompressed byte, but + don't create a table entry until the next code */ + got = GET(); + if (in_eof) /* no compressed data is ok */ + return; + final = prev = (unsigned)got; /* low 8 bits of code */ + got = GET(); + if (in_eof || (got & 1) != 0) /* missing a bit or code >= 256 */ + bail("invalid lzw code: ", in); + rem = (unsigned)got >> 1; /* remaining 7 bits */ + left = 7; + chunk = bits - 2; /* 7 bytes left in this chunk */ + out_buf[0] = (unsigned char)final; /* write first decompressed byte */ + outcnt = 1; + + /* decode codes */ + stack = 0; + for (;;) { + /* if the table will be full after this, increment the code size */ + if (end >= mask && bits < max) { + FLUSHCODE(); + bits++; + mask <<= 1; + mask++; + } + + /* get a code of length bits */ + if (chunk == 0) /* decrement chunk modulo bits */ + chunk = bits; + code = rem; /* low bits of code */ + got = GET(); + if (in_eof) { /* EOF is end of compressed data */ + /* write remaining buffered output */ + out_tot += outcnt; + if (outcnt && decode == 1) + writen(outd, out_buf, outcnt); + return; + } + code += (unsigned)got << left; /* middle (or high) bits of code */ + left += 8; + chunk--; + if (bits > left) { /* need more bits */ + got = GET(); + if (in_eof) /* can't end in middle of code */ + bail("invalid lzw code: ", in); + code += (unsigned)got << left; /* high bits of code */ + left += 8; + chunk--; + } + code &= mask; /* mask to current code length */ + left -= bits; /* number of unused bits */ + rem = (unsigned)got >> (8 - left); /* unused bits from last byte */ + + /* process clear code (256) */ + if (code == 256 && flags) { + FLUSHCODE(); + bits = 9; /* initialize bits and mask */ + mask = 0x1ff; + end = 255; /* empty table */ + continue; /* get next code */ + } + + /* special code to reuse last match */ + temp = code; /* save the current code */ + if (code > end) { + /* Be picky on the allowed code here, and make sure that the code + we drop through (prev) will be a valid index so that random + input does not cause an exception. The code != end + 1 check is + empirically derived, and not checked in the original uncompress + code. If this ever causes a problem, that check could be safely + removed. Leaving this check in greatly improves pigz's ability + to detect random or corrupted input after a compress header. + In any case, the prev > end check must be retained. */ + if (code != end + 1 || prev > end) + bail("invalid lzw code: ", in); + match[stack++] = (unsigned char)final; + code = prev; + } + + /* walk through linked list to generate output in reverse order */ + p = match + stack; + while (code >= 256) { + *p++ = suffix[code]; + code = prefix[code]; + } + stack = p - match; + match[stack++] = (unsigned char)code; + final = code; + + /* link new table entry */ + if (end < mask) { + end++; + prefix[end] = (unsigned short)prev; + suffix[end] = (unsigned char)final; + } + + /* set previous code for next iteration */ + prev = temp; + + /* write output in forward order */ + while (stack > OUTSIZE - outcnt) { + while (outcnt < OUTSIZE) + out_buf[outcnt++] = match[--stack]; + out_tot += outcnt; + if (decode == 1) + writen(outd, out_buf, outcnt); + outcnt = 0; + } + p = match + stack; + do { + out_buf[outcnt++] = *--p; + } while (p > match); + stack = 0; + + /* loop for next code with final and prev as the last match, rem and + left provide the first 0..7 bits of the next code, end is the last + valid table entry */ + } +} + +/* --- file processing --- */ + +/* extract file name from path */ +local char *justname(char *path) +{ + char *p; + + p = path + strlen(path); + while (--p >= path) + if (*p == '/') + break; + return p + 1; +} + +/* Copy file attributes, from -> to, as best we can. This is best effort, so + no errors are reported. The mode bits, including suid, sgid, and the sticky + bit are copied (if allowed), the owner's user id and group id are copied + (again if allowed), and the access and modify times are copied. */ +local void copymeta(char *from, char *to) +{ + struct stat st; + struct timeval times[2]; + + /* get all of from's Unix meta data, return if not a regular file */ + if (stat(from, &st) != 0 || (st.st_mode & S_IFMT) != S_IFREG) + return; + + /* set to's mode bits, ignore errors */ + chmod(to, st.st_mode & 07777); + + /* copy owner's user and group, ignore errors */ + chown(to, st.st_uid, st.st_gid); + + /* copy access and modify times, ignore errors */ + times[0].tv_sec = st.st_atime; + times[0].tv_usec = 0; + times[1].tv_sec = st.st_mtime; + times[1].tv_usec = 0; + utimes(to, times); +} + +/* set the access and modify times of fd to t */ +local void touch(char *path, time_t t) +{ + struct timeval times[2]; + + times[0].tv_sec = t; + times[0].tv_usec = 0; + times[1].tv_sec = t; + times[1].tv_usec = 0; + utimes(path, times); +} + +/* process provided input file, or stdin if path is NULL -- process() can + call itself for recursive directory processing */ +local void process(char *path) +{ + int method = -1; /* get_header() return value */ + size_t len; /* length of base name (minus suffix) */ + struct stat st; /* to get file type and mod time */ + + /* open input file with name in, descriptor ind -- set name and mtime */ + if (path == NULL) { + strcpy(in, ""); + ind = 0; + name = NULL; + mtime = headis & 2 ? + (fstat(ind, &st) ? time(NULL) : st.st_mtime) : 0; + len = 0; + } + else { + /* set input file name (already set if recursed here) */ + if (path != in) { + strncpy(in, path, sizeof(in)); + if (in[sizeof(in) - 1]) + bail("name too long: ", path); + } + len = strlen(in); + + /* only process regular files, but allow symbolic links if -f, + recurse into directory if -r */ + if (lstat(in, &st)) { +#ifdef EOVERFLOW + if (errno == EOVERFLOW || errno == EFBIG) + bail(in, + " too large -- pigz not compiled with large file support"); +#endif + if (verbosity > 0) + fprintf(stderr, "%s does not exist -- skipping\n", in); + return; + } + if ((st.st_mode & S_IFMT) != S_IFREG && + (st.st_mode & S_IFMT) != S_IFLNK && + (st.st_mode & S_IFMT) != S_IFDIR) { + if (verbosity > 0) + fprintf(stderr, "%s is a special file or device -- skipping\n", + in); + return; + } + if ((st.st_mode & S_IFMT) == S_IFLNK && !force && !pipeout) { + if (verbosity > 0) + fprintf(stderr, "%s is a symbolic link -- skipping\n", in); + return; + } + if ((st.st_mode & S_IFMT) == S_IFDIR && !recurse) { + if (verbosity > 0) + fprintf(stderr, "%s is a directory -- skipping\n", in); + return; + } + + /* recurse into directory (assumes Unix) */ + if ((st.st_mode & S_IFMT) == S_IFDIR) { + char *roll, *item, *cut, *base, *bigger; + size_t len, hold; + DIR *here; + struct dirent *next; + + /* accumulate list of entries (need to do this, since readdir() + behavior not defined if directory modified between calls) */ + here = opendir(in); + if (here == NULL) + return; + hold = 512; + roll = malloc(hold); + if (roll == NULL) + bail("not enough memory", ""); + *roll = 0; + item = roll; + while ((next = readdir(here)) != NULL) { + if (next->d_name[0] == 0 || + (next->d_name[0] == '.' && (next->d_name[1] == 0 || + (next->d_name[1] == '.' && next->d_name[2] == 0)))) + continue; + len = strlen(next->d_name) + 1; + if (item + len + 1 > roll + hold) { + do { /* make roll bigger */ + hold <<= 1; + } while (item + len + 1 > roll + hold); + bigger = realloc(roll, hold); + if (bigger == NULL) { + free(roll); + bail("not enough memory", ""); + } + item = bigger + (item - roll); + roll = bigger; + } + strcpy(item, next->d_name); + item += len; + *item = 0; + } + closedir(here); + + /* run process() for each entry in the directory */ + cut = base = in + strlen(in); + if (base > in && base[-1] != (unsigned char)'/') { + if ((size_t)(base - in) >= sizeof(in)) + bail("path too long", in); + *base++ = '/'; + } + item = roll; + while (*item) { + strncpy(base, item, sizeof(in) - (base - in)); + if (in[sizeof(in) - 1]) { + strcpy(in + (sizeof(in) - 4), "..."); + bail("path too long: ", in); + } + process(in); + item += strlen(item) + 1; + } + *cut = 0; + + /* release list of entries */ + free(roll); + return; + } + + /* don't compress .gz (or provided suffix) files, unless -f */ + if (!(force || list || decode) && len >= strlen(sufx) && + strcmp(in + len - strlen(sufx), sufx) == 0) { + if (verbosity > 0) + fprintf(stderr, "%s ends with %s -- skipping\n", in, sufx); + return; + } + + /* only decompress or list files with compressed suffix */ + if (list || decode) { + int suf = compressed_suffix(in); + if (suf == 0) { + if (verbosity > 0) + fprintf(stderr, + "%s does not have compressed suffix -- skipping\n", + in); + return; + } + len -= suf; + } + + /* open input file */ + ind = open(in, O_RDONLY, 0); + if (ind < 0) + bail("read error on ", in); + + /* prepare gzip header information for compression */ + name = headis & 1 ? justname(in) : NULL; + mtime = headis & 2 ? st.st_mtime : 0; + } + SET_BINARY_MODE(ind); + + /* if decoding or testing, try to read gzip header */ + hname = NULL; + if (decode) { + in_init(); + method = get_header(1); + if (method != 8 && method != 256) { + RELEASE(hname); + if (ind != 0) + close(ind); + if (method != -1 && verbosity > 0) + fprintf(stderr, + method < 0 ? "%s is not compressed -- skipping\n" : + "%s has unknown compression method -- skipping\n", + in); + return; + } + + /* if requested, test input file (possibly a special list) */ + if (decode == 2) { + if (method == 8) + infchk(); + else { + unlzw(); + if (list) { + in_tot -= 3; + show_info(method, 0, out_tot, 0); + } + } + RELEASE(hname); + if (ind != 0) + close(ind); + return; + } + } + + /* if requested, just list information about input file */ + if (list) { + list_info(); + RELEASE(hname); + if (ind != 0) + close(ind); + return; + } + + /* create output file out, descriptor outd */ + if (path == NULL || pipeout) { + /* write to stdout */ + out = malloc(strlen("") + 1); + if (out == NULL) + bail("not enough memory", ""); + strcpy(out, ""); + outd = 1; + if (!decode && !force && isatty(outd)) + bail("trying to write compressed data to a terminal", + " (use -f to force)"); + } + else { + char *to; + + /* use header name for output when decompressing with -N */ + to = in; + if (decode && (headis & 1) != 0 && hname != NULL) { + to = hname; + len = strlen(hname); + } + + /* create output file and open to write */ + out = malloc(len + (decode ? 0 : strlen(sufx)) + 1); + if (out == NULL) + bail("not enough memory", ""); + memcpy(out, to, len); + strcpy(out + len, decode ? "" : sufx); + outd = open(out, O_CREAT | O_TRUNC | O_WRONLY | + (force ? 0 : O_EXCL), 0666); + + /* if exists and not -f, give user a chance to overwrite */ + if (outd < 0 && errno == EEXIST && isatty(0) && verbosity) { + int ch, reply; + + fprintf(stderr, "%s exists -- overwrite (y/n)? ", out); + fflush(stderr); + reply = -1; + do { + ch = getchar(); + if (reply < 0 && ch != ' ' && ch != '\t') + reply = ch == 'y' || ch == 'Y' ? 1 : 0; + } while (ch != EOF && ch != '\n' && ch != '\r'); + if (reply == 1) + outd = open(out, O_CREAT | O_TRUNC | O_WRONLY, + 0666); + } + + /* if exists and no overwrite, report and go on to next */ + if (outd < 0 && errno == EEXIST) { + if (verbosity > 0) + fprintf(stderr, "%s exists -- skipping\n", out); + RELEASE(out); + RELEASE(hname); + if (ind != 0) + close(ind); + return; + } + + /* if some other error, give up */ + if (outd < 0) + bail("write error on ", out); + } + SET_BINARY_MODE(outd); + RELEASE(hname); + + /* process ind to outd */ + if (verbosity > 1) + fprintf(stderr, "%s to %s ", in, out); + if (decode) { + if (method == 8) + infchk(); + else + unlzw(); + } +#ifndef NOTHREAD + else if (procs > 1) + parallel_compress(); +#endif + else + single_compress(0); + if (verbosity > 1) { + putc('\n', stderr); + fflush(stderr); + } + + /* finish up, copy attributes, set times, delete original */ + if (ind != 0) + close(ind); + if (outd != 1) { + if (close(outd)) + bail("write error on ", out); + outd = -1; /* now prevent deletion on interrupt */ + if (ind != 0) { + copymeta(in, out); + if (!keep) + unlink(in); + } + if (decode && (headis & 2) != 0 && stamp) + touch(out, stamp); + } + RELEASE(out); +} + +local char *helptext[] = { +"Usage: pigz [options] [files ...]", +" will compress files in place, adding the suffix '.gz'. If no files are", +#ifdef NOTHREAD +" specified, stdin will be compressed to stdout. pigz does what gzip does.", +#else +" specified, stdin will be compressed to stdout. pigz does what gzip does,", +" but spreads the work over multiple processors and cores when compressing.", +#endif +"", +"Options:", +" -0 to -9, --fast, --best Compression levels, --fast is -1, --best is -9", +" -b, --blocksize mmm Set compression block size to mmmK (default 128K)", +#ifndef NOTHREAD +" -p, --processes n Allow up to n compression threads (default is the", +" number of online processors, or 8 if unknown)", +#endif +" -i, --independent Compress blocks independently for damage recovery", +" -R, --rsyncable Input-determined block locations for rsync", +" -d, --decompress Decompress the compressed input", +" -t, --test Test the integrity of the compressed input", +" -l, --list List the contents of the compressed input", +" -f, --force Force overwrite, compress .gz, links, and to terminal", +" -r, --recursive Process the contents of all subdirectories", +" -S, --suffix .sss Use suffix .sss instead of .gz (for compression)", +" -z, --zlib Compress to zlib (.zz) instead of gzip format", +" -K, --zip Compress to PKWare zip (.zip) single entry format", +" -k, --keep Do not delete original file after processing", +" -c, --stdout Write all processed output to stdout (won't delete)", +" -N, --name Store/restore file name and mod time in/from header", +" -n, --no-name Do not store or restore file name in/from header", +" -T, --no-time Do not store or restore mod time in/from header", +" -q, --quiet Print no messages, even on error", +#ifdef DEBUG +" -v, --verbose Provide more verbose output (-vv to debug)" +#else +" -v, --verbose Provide more verbose output" +#endif +}; + +/* display the help text above */ +local void help(void) +{ + int n; + + if (verbosity == 0) + return; + for (n = 0; n < (int)(sizeof(helptext) / sizeof(char *)); n++) + fprintf(stderr, "%s\n", helptext[n]); + fflush(stderr); + exit(0); +} + +#ifndef NOTHREAD + +/* try to determine the number of processors */ +local int nprocs(int n) +{ +# ifdef _SC_NPROCESSORS_ONLN + n = (int)sysconf(_SC_NPROCESSORS_ONLN); +# else +# ifdef _SC_NPROC_ONLN + n = (int)sysconf(_SC_NPROC_ONLN); +# endif +# endif + return n; +} + +#endif + +/* set option defaults */ +local void defaults(void) +{ + level = Z_DEFAULT_COMPRESSION; +#ifdef NOTHREAD + procs = 1; +#else + procs = nprocs(8); +#endif + size = 131072UL; + rsync = 0; /* don't do rsync blocking */ + dict = 1; /* initialize dictionary each thread */ + verbosity = 1; /* normal message level */ + headis = 3; /* store/restore name and timestamp */ + pipeout = 0; /* don't force output to stdout */ + sufx = ".gz"; /* compressed file suffix */ + decode = 0; /* compress */ + list = 0; /* compress */ + keep = 0; /* delete input file once compressed */ + force = 0; /* don't overwrite, don't compress links */ + recurse = 0; /* don't go into directories */ + form = 0; /* use gzip format */ +} + +/* long options conversion to short options */ +local char *longopts[][2] = { + {"LZW", "Z"}, {"ascii", "a"}, {"best", "9"}, {"bits", "Z"}, + {"blocksize", "b"}, {"decompress", "d"}, {"fast", "1"}, {"force", "f"}, + {"help", "h"}, {"independent", "i"}, {"keep", "k"}, {"license", "L"}, + {"list", "l"}, {"name", "N"}, {"no-name", "n"}, {"no-time", "T"}, + {"processes", "p"}, {"quiet", "q"}, {"recursive", "r"}, {"rsyncable", "R"}, + {"silent", "q"}, {"stdout", "c"}, {"suffix", "S"}, {"test", "t"}, + {"to-stdout", "c"}, {"uncompress", "d"}, {"verbose", "v"}, + {"version", "V"}, {"zip", "K"}, {"zlib", "z"}}; +#define NLOPTS (sizeof(longopts) / (sizeof(char *) << 1)) + +/* either new buffer size, new compression level, or new number of processes -- + get rid of old buffers and threads to force the creation of new ones with + the new settings */ +local void new_opts(void) +{ + single_compress(1); +#ifndef NOTHREAD + finish_jobs(); +#endif +} + +/* verify that arg is only digits, and if so, return the decimal value */ +local size_t num(char *arg) +{ + char *str = arg; + size_t val = 0; + + if (*str == 0) + bail("internal error: empty parameter", ""); + do { + if (*str < '0' || *str > '9') + bail("invalid numeric parameter: ", arg); + val = val * 10 + (*str - '0'); + /* %% need to detect overflow here */ + } while (*++str); + return val; +} + +/* process an option, return true if a file name and not an option */ +local int option(char *arg) +{ + static int get = 0; /* if not zero, look for option parameter */ + char bad[3] = "-X"; /* for error messages (X is replaced) */ + + /* if no argument or dash option, check status of get */ + if (get && (arg == NULL || *arg == '-')) { + bad[1] = "bps"[get - 1]; + bail("missing parameter after ", bad); + } + if (arg == NULL) + return 0; + + /* process long option or short options */ + if (*arg == '-') { + /* a single dash will be interpreted as stdin */ + if (*++arg == 0) + return 1; + + /* process long option (fall through with equivalent short option) */ + if (*arg == '-') { + int j; + + arg++; + for (j = NLOPTS - 1; j >= 0; j--) + if (strcmp(arg, longopts[j][0]) == 0) { + arg = longopts[j][1]; + break; + } + if (j < 0) + bail("invalid option: ", arg - 2); + } + + /* process short options (more than one allowed after dash) */ + do { + /* if looking for a parameter, don't process more single character + options until we have the parameter */ + if (get) { + if (get == 3) + bail("invalid usage: -s must be followed by space", ""); + break; /* allow -pnnn and -bnnn, fall to parameter code */ + } + + /* process next single character option */ + bad[1] = *arg; + switch (*arg) { + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + level = *arg - '0'; + new_opts(); + break; + case 'K': form = 2; sufx = ".zip"; break; + case 'L': + fputs(VERSION, stderr); + fputs("Copyright (C) 2007, 2008, 2009, 2010 Mark Adler\n", + stderr); + fputs("Subject to the terms of the zlib license.\n", + stderr); + fputs("No warranty is provided or implied.\n", stderr); + exit(0); + case 'N': headis = 3; break; + case 'T': headis &= ~2; break; + case 'R': rsync = 1; + bail("invalid option: rsyncable not implemented yet: ", bad); + case 'S': get = 3; break; + case 'V': fputs(VERSION, stderr); exit(0); + case 'Z': + bail("invalid option: LZW output not supported: ", bad); + case 'a': + bail("invalid option: ascii conversion not supported: ", bad); + case 'b': get = 1; break; + case 'c': pipeout = 1; break; + case 'd': decode = 1; headis = 0; break; + case 'f': force = 1; break; + case 'h': help(); break; + case 'i': dict = 0; break; + case 'k': keep = 1; break; + case 'l': list = 1; break; + case 'n': headis &= ~1; break; + case 'p': get = 2; break; + case 'q': verbosity = 0; break; + case 'r': recurse = 1; break; + case 't': decode = 2; break; + case 'v': verbosity++; break; + case 'z': form = 1; sufx = ".zz"; break; + default: + bail("invalid option: ", bad); + } + } while (*++arg); + if (*arg == 0) + return 0; + } + + /* process option parameter for -b, -p, or -s */ + if (get) { + size_t n; + + if (get == 1) { + n = num(arg); + size = n << 10; /* chunk size */ + if (size < DICT) + bail("block size too small (must be >= 32K)", ""); + if (n != size >> 10 || + size + (size >> 11) + 10 < size || + (ssize_t)(size + (size >> 11) + 10) < 0) + bail("block size too large: ", arg); + new_opts(); + } + else if (get == 2) { + n = num(arg); + procs = (int)n; /* # processes */ + if (procs < 1) + bail("invalid number of processes: ", arg); + if ((size_t)procs != n || ((procs << 1) + 2) < 1) + bail("too many processes: ", arg); +#ifdef NOTHREAD + if (procs > 1) + bail("this pigz compiled without threads", ""); +#endif + new_opts(); + } + else if (get == 3) + sufx = arg; /* gz suffix */ + get = 0; + return 0; + } + + /* neither an option nor parameter */ + return 1; +} + +/* catch termination signal */ +local void cut_short(int sig) +{ + (void)sig; + Trace(("termination by user")); + if (outd != -1 && out != NULL) + unlink(out); + log_dump(); + _exit(1); +} + +/* Process arguments, compress in the gzip format. Note that procs must be at + least two in order to provide a dictionary in one work unit for the other + work unit, and that size must be at least 32K to store a full dictionary. */ +int main(int argc, char **argv) +{ + int n; /* general index */ + unsigned long done; /* number of named files processed */ + char *opts, *p; /* environment default options, marker */ + + /* prepare for interrupts and logging */ + signal(SIGINT, cut_short); +#ifndef NOTHREAD + yarn_prefix = "pigz"; /* prefix for yarn error messages */ + yarn_abort = cut_short; /* call on thread error */ +#endif +#ifdef DEBUG + gettimeofday(&start, NULL); /* starting time for log entries */ + log_init(); /* initialize logging */ +#endif + + /* set all options to defaults */ + defaults(); + + /* process user environment variable defaults */ + opts = getenv("GZIP"); + if (opts != NULL) { + while (*opts) { + while (*opts == ' ' || *opts == '\t') + opts++; + p = opts; + while (*p && *p != ' ' && *p != '\t') + p++; + n = *p; + *p = 0; + if (option(opts)) + bail("cannot provide files in GZIP environment variable", ""); + opts = p + (n ? 1 : 0); + } + option(NULL); + } + + /* if no command line arguments and stdout is a terminal, show help */ + if (argc < 2 && isatty(1)) + help(); + + /* decompress if named "unpigz" or "gunzip" */ + p = strrchr(argv[0], '/'); + p = p == NULL ? argv[0] : p + 1; + if (strcmp(p, "unpigz") == 0 || strcmp(p, "gunzip") == 0) + decode = 1, headis = 0; + + /* process command-line arguments */ + done = 0; + for (n = 1; n < argc; n++) + if (option(argv[n])) { /* true if file name, process it */ + if (done == 1 && pipeout && !decode && !list && form > 1) { + fprintf(stderr, "warning: output is concatenated zip files "); + fprintf(stderr, "-- pigz will not be able to extract\n"); + } + process(strcmp(argv[n], "-") ? argv[n] : NULL); + done++; + } + option(NULL); + + /* list stdin or compress stdin to stdout if no file names provided */ + if (done == 0) + process(NULL); + + /* done -- release resources, show log */ + new_opts(); + log_dump(); + return 0; +} -- cgit v1.2.3