From 930bf01caf3cbcabf97444b3071bcaff28597635 Mon Sep 17 00:00:00 2001 From: Dees_Troy Date: Sat, 10 Aug 2013 22:19:03 +0000 Subject: Remove libjpegtwrp and use CM provided libjpeg --- Android.mk | 3 +- libjpegtwrp/Android.mk | 77 - libjpegtwrp/CleanSpec.mk | 49 - libjpegtwrp/MODULE_LICENSE_BSD_LIKE | 0 libjpegtwrp/NOTICE | 38 - libjpegtwrp/README | 385 ---- libjpegtwrp/README-VeNum | 20 - libjpegtwrp/ThirdPartyProject.prop | 9 - libjpegtwrp/ansi2knr.1 | 36 - libjpegtwrp/ansi2knr.c | 693 ------ libjpegtwrp/armv6_idct.S | 366 --- libjpegtwrp/asm/armv7/jdcolor-android-armv7.S | 1223 ---------- libjpegtwrp/asm/armv7/jdcolor-armv7.S | 632 ------ libjpegtwrp/asm/armv7/jdidct-armv7.S | 762 ------- libjpegtwrp/cderror.h | 132 -- libjpegtwrp/cdjpeg.c | 181 -- libjpegtwrp/cdjpeg.h | 184 -- libjpegtwrp/change.log | 217 -- libjpegtwrp/cjpeg.1 | 292 --- libjpegtwrp/cjpeg.c | 606 ----- libjpegtwrp/ckconfig.c | 402 ---- libjpegtwrp/coderules.doc | 118 - libjpegtwrp/config.guess | 883 -------- libjpegtwrp/config.sub | 954 -------- libjpegtwrp/configure | 2011 ----------------- libjpegtwrp/djpeg.1 | 253 --- libjpegtwrp/djpeg.c | 616 ----- libjpegtwrp/example.c | 433 ---- libjpegtwrp/filelist.doc | 210 -- libjpegtwrp/install-sh | 250 -- libjpegtwrp/install.doc | 1063 --------- libjpegtwrp/jcapimin.c | 280 --- libjpegtwrp/jcapistd.c | 161 -- libjpegtwrp/jccoefct.c | 449 ---- libjpegtwrp/jccolor.c | 527 ----- libjpegtwrp/jcdctmgr.c | 387 ---- libjpegtwrp/jchuff.c | 909 -------- libjpegtwrp/jchuff.h | 47 - libjpegtwrp/jcinit.c | 72 - libjpegtwrp/jcmainct.c | 293 --- libjpegtwrp/jcmarker.c | 664 ------ libjpegtwrp/jcmaster.c | 590 ----- libjpegtwrp/jcomapi.c | 106 - libjpegtwrp/jconfig.bcc | 48 - libjpegtwrp/jconfig.cfg | 44 - libjpegtwrp/jconfig.dj | 38 - libjpegtwrp/jconfig.doc | 155 -- libjpegtwrp/jconfig.h | 156 -- libjpegtwrp/jconfig.mac | 43 - libjpegtwrp/jconfig.manx | 43 - libjpegtwrp/jconfig.mc6 | 52 - libjpegtwrp/jconfig.sas | 43 - libjpegtwrp/jconfig.st | 42 - libjpegtwrp/jconfig.vc | 45 - libjpegtwrp/jconfig.vms | 37 - libjpegtwrp/jconfig.wat | 38 - libjpegtwrp/jcparam.c | 614 ----- libjpegtwrp/jcphuff.c | 833 ------- libjpegtwrp/jcprepct.c | 354 --- libjpegtwrp/jcsample.c | 519 ----- libjpegtwrp/jctrans.c | 395 ---- libjpegtwrp/jdapimin.c | 401 ---- libjpegtwrp/jdapistd.c | 397 ---- libjpegtwrp/jdatadst.c | 151 -- libjpegtwrp/jdatasrc.c | 212 -- libjpegtwrp/jdcoefct.c | 1038 --------- libjpegtwrp/jdcolor.c | 976 -------- libjpegtwrp/jdct.h | 176 -- libjpegtwrp/jddctmgr.c | 335 --- libjpegtwrp/jdhuff.c | 894 -------- libjpegtwrp/jdhuff.h | 202 -- libjpegtwrp/jdinput.c | 415 ---- libjpegtwrp/jdmainct.c | 512 ----- libjpegtwrp/jdmarker.c | 1397 ------------ libjpegtwrp/jdmaster.c | 580 ----- libjpegtwrp/jdmerge.c | 902 -------- libjpegtwrp/jdphuff.c | 770 ------- libjpegtwrp/jdpostct.c | 290 --- libjpegtwrp/jdsample.c | 478 ---- libjpegtwrp/jdtrans.c | 271 --- libjpegtwrp/jerror.c | 252 --- libjpegtwrp/jerror.h | 291 --- libjpegtwrp/jfdctflt.c | 168 -- libjpegtwrp/jfdctfst.c | 224 -- libjpegtwrp/jfdctint.c | 283 --- libjpegtwrp/jidctflt.c | 242 -- libjpegtwrp/jidctfst.c | 368 --- libjpegtwrp/jidctint.c | 389 ---- libjpegtwrp/jidctred.c | 398 ---- libjpegtwrp/jidctvenum.c | 229 -- libjpegtwrp/jinclude.h | 91 - libjpegtwrp/jmem-android.c | 186 -- libjpegtwrp/jmem-ashmem.c | 170 -- libjpegtwrp/jmemansi.c | 167 -- libjpegtwrp/jmemdos.c | 638 ------ libjpegtwrp/jmemdosa.asm | 379 ---- libjpegtwrp/jmemmac.c | 289 --- libjpegtwrp/jmemmgr.c | 1118 --------- libjpegtwrp/jmemname.c | 276 --- libjpegtwrp/jmemnobs.c | 109 - libjpegtwrp/jmemsys.h | 204 -- libjpegtwrp/jmorecfg.h | 387 ---- libjpegtwrp/jpegint.h | 475 ---- libjpegtwrp/jpeglib.h | 1184 ---------- libjpegtwrp/jpegtran.1 | 238 -- libjpegtwrp/jpegtran.c | 504 ----- libjpegtwrp/jquant1.c | 856 ------- libjpegtwrp/jquant2.c | 1310 ----------- libjpegtwrp/jutils.c | 185 -- libjpegtwrp/jversion.h | 14 - libjpegtwrp/libjpeg.doc | 3006 ------------------------- libjpegtwrp/ltconfig | 1512 ------------- libjpegtwrp/ltmain.sh | 2453 -------------------- libjpegtwrp/makcjpeg.st | 38 - libjpegtwrp/makdjpeg.st | 38 - libjpegtwrp/makeapps.ds | 828 ------- libjpegtwrp/makefile.ansi | 214 -- libjpegtwrp/makefile.bcc | 285 --- libjpegtwrp/makefile.cfg | 319 --- libjpegtwrp/makefile.dj | 220 -- libjpegtwrp/makefile.manx | 214 -- libjpegtwrp/makefile.mc6 | 249 -- libjpegtwrp/makefile.mms | 218 -- libjpegtwrp/makefile.sas | 252 --- libjpegtwrp/makefile.unix | 228 -- libjpegtwrp/makefile.vc | 211 -- libjpegtwrp/makefile.vms | 142 -- libjpegtwrp/makefile.wat | 233 -- libjpegtwrp/makelib.ds | 1046 --------- libjpegtwrp/makeproj.mac | 213 -- libjpegtwrp/makljpeg.st | 70 - libjpegtwrp/maktjpeg.st | 32 - libjpegtwrp/makvms.opt | 4 - libjpegtwrp/rdbmp.c | 439 ---- libjpegtwrp/rdcolmap.c | 253 --- libjpegtwrp/rdgif.c | 38 - libjpegtwrp/rdjpgcom.1 | 54 - libjpegtwrp/rdjpgcom.c | 496 ---- libjpegtwrp/rdppm.c | 458 ---- libjpegtwrp/rdrle.c | 387 ---- libjpegtwrp/rdswitch.c | 332 --- libjpegtwrp/rdtarga.c | 500 ---- libjpegtwrp/structure.doc | 948 -------- libjpegtwrp/testimg.bmp | Bin 35050 -> 0 bytes libjpegtwrp/testimg.jpg | Bin 5756 -> 0 bytes libjpegtwrp/testimg.ppm | 4 - libjpegtwrp/testimgp.jpg | Bin 5645 -> 0 bytes libjpegtwrp/testorig.jpg | Bin 5770 -> 0 bytes libjpegtwrp/testprog.jpg | Bin 5655 -> 0 bytes libjpegtwrp/transupp.c | 928 -------- libjpegtwrp/transupp.h | 135 -- libjpegtwrp/usage.doc | 562 ----- libjpegtwrp/wizard.doc | 211 -- libjpegtwrp/wrbmp.c | 442 ---- libjpegtwrp/wrgif.c | 399 ---- libjpegtwrp/wrjpgcom.1 | 103 - libjpegtwrp/wrjpgcom.c | 583 ----- libjpegtwrp/wrppm.c | 268 --- libjpegtwrp/wrrle.c | 305 --- libjpegtwrp/wrtarga.c | 253 --- minuitwrp/Android.mk | 9 +- minuitwrp/resources.c | 2 +- prebuilt/Android.mk | 1 + 163 files changed, 8 insertions(+), 63230 deletions(-) delete mode 100755 libjpegtwrp/Android.mk delete mode 100644 libjpegtwrp/CleanSpec.mk delete mode 100644 libjpegtwrp/MODULE_LICENSE_BSD_LIKE delete mode 100644 libjpegtwrp/NOTICE delete mode 100644 libjpegtwrp/README delete mode 100644 libjpegtwrp/README-VeNum delete mode 100644 libjpegtwrp/ThirdPartyProject.prop delete mode 100644 libjpegtwrp/ansi2knr.1 delete mode 100644 libjpegtwrp/ansi2knr.c delete mode 100644 libjpegtwrp/armv6_idct.S delete mode 100644 libjpegtwrp/asm/armv7/jdcolor-android-armv7.S delete mode 100644 libjpegtwrp/asm/armv7/jdcolor-armv7.S delete mode 100644 libjpegtwrp/asm/armv7/jdidct-armv7.S delete mode 100644 libjpegtwrp/cderror.h delete mode 100644 libjpegtwrp/cdjpeg.c delete mode 100644 libjpegtwrp/cdjpeg.h delete mode 100644 libjpegtwrp/change.log delete mode 100644 libjpegtwrp/cjpeg.1 delete mode 100644 libjpegtwrp/cjpeg.c delete mode 100644 libjpegtwrp/ckconfig.c delete mode 100644 libjpegtwrp/coderules.doc delete mode 100755 libjpegtwrp/config.guess delete mode 100755 libjpegtwrp/config.sub delete mode 100755 libjpegtwrp/configure delete mode 100644 libjpegtwrp/djpeg.1 delete mode 100644 libjpegtwrp/djpeg.c delete mode 100644 libjpegtwrp/example.c delete mode 100644 libjpegtwrp/filelist.doc delete mode 100755 libjpegtwrp/install-sh delete mode 100644 libjpegtwrp/install.doc delete mode 100644 libjpegtwrp/jcapimin.c delete mode 100644 libjpegtwrp/jcapistd.c delete mode 100644 libjpegtwrp/jccoefct.c delete mode 100644 libjpegtwrp/jccolor.c delete mode 100644 libjpegtwrp/jcdctmgr.c delete mode 100644 libjpegtwrp/jchuff.c delete mode 100644 libjpegtwrp/jchuff.h delete mode 100644 libjpegtwrp/jcinit.c delete mode 100644 libjpegtwrp/jcmainct.c delete mode 100644 libjpegtwrp/jcmarker.c delete mode 100644 libjpegtwrp/jcmaster.c delete mode 100644 libjpegtwrp/jcomapi.c delete mode 100644 libjpegtwrp/jconfig.bcc delete mode 100644 libjpegtwrp/jconfig.cfg delete mode 100644 libjpegtwrp/jconfig.dj delete mode 100644 libjpegtwrp/jconfig.doc delete mode 100644 libjpegtwrp/jconfig.h delete mode 100644 libjpegtwrp/jconfig.mac delete mode 100644 libjpegtwrp/jconfig.manx delete mode 100644 libjpegtwrp/jconfig.mc6 delete mode 100644 libjpegtwrp/jconfig.sas delete mode 100644 libjpegtwrp/jconfig.st delete mode 100644 libjpegtwrp/jconfig.vc delete mode 100644 libjpegtwrp/jconfig.vms delete mode 100644 libjpegtwrp/jconfig.wat delete mode 100644 libjpegtwrp/jcparam.c delete mode 100644 libjpegtwrp/jcphuff.c delete mode 100644 libjpegtwrp/jcprepct.c delete mode 100644 libjpegtwrp/jcsample.c delete mode 100644 libjpegtwrp/jctrans.c delete mode 100644 libjpegtwrp/jdapimin.c delete mode 100644 libjpegtwrp/jdapistd.c delete mode 100644 libjpegtwrp/jdatadst.c delete mode 100644 libjpegtwrp/jdatasrc.c delete mode 100644 libjpegtwrp/jdcoefct.c delete mode 100644 libjpegtwrp/jdcolor.c delete mode 100644 libjpegtwrp/jdct.h delete mode 100644 libjpegtwrp/jddctmgr.c delete mode 100644 libjpegtwrp/jdhuff.c delete mode 100644 libjpegtwrp/jdhuff.h delete mode 100644 libjpegtwrp/jdinput.c delete mode 100644 libjpegtwrp/jdmainct.c delete mode 100644 libjpegtwrp/jdmarker.c delete mode 100644 libjpegtwrp/jdmaster.c delete mode 100644 libjpegtwrp/jdmerge.c delete mode 100644 libjpegtwrp/jdphuff.c delete mode 100644 libjpegtwrp/jdpostct.c delete mode 100644 libjpegtwrp/jdsample.c delete mode 100644 libjpegtwrp/jdtrans.c delete mode 100644 libjpegtwrp/jerror.c delete mode 100644 libjpegtwrp/jerror.h delete mode 100644 libjpegtwrp/jfdctflt.c delete mode 100644 libjpegtwrp/jfdctfst.c delete mode 100644 libjpegtwrp/jfdctint.c delete mode 100644 libjpegtwrp/jidctflt.c delete mode 100644 libjpegtwrp/jidctfst.c delete mode 100644 libjpegtwrp/jidctint.c delete mode 100644 libjpegtwrp/jidctred.c delete mode 100644 libjpegtwrp/jidctvenum.c delete mode 100644 libjpegtwrp/jinclude.h delete mode 100644 libjpegtwrp/jmem-android.c delete mode 100644 libjpegtwrp/jmem-ashmem.c delete mode 100644 libjpegtwrp/jmemansi.c delete mode 100644 libjpegtwrp/jmemdos.c delete mode 100644 libjpegtwrp/jmemdosa.asm delete mode 100644 libjpegtwrp/jmemmac.c delete mode 100644 libjpegtwrp/jmemmgr.c delete mode 100644 libjpegtwrp/jmemname.c delete mode 100644 libjpegtwrp/jmemnobs.c delete mode 100644 libjpegtwrp/jmemsys.h delete mode 100644 libjpegtwrp/jmorecfg.h delete mode 100644 libjpegtwrp/jpegint.h delete mode 100644 libjpegtwrp/jpeglib.h delete mode 100644 libjpegtwrp/jpegtran.1 delete mode 100644 libjpegtwrp/jpegtran.c delete mode 100644 libjpegtwrp/jquant1.c delete mode 100644 libjpegtwrp/jquant2.c delete mode 100644 libjpegtwrp/jutils.c delete mode 100644 libjpegtwrp/jversion.h delete mode 100644 libjpegtwrp/libjpeg.doc delete mode 100755 libjpegtwrp/ltconfig delete mode 100644 libjpegtwrp/ltmain.sh delete mode 100644 libjpegtwrp/makcjpeg.st delete mode 100644 libjpegtwrp/makdjpeg.st delete mode 100644 libjpegtwrp/makeapps.ds delete mode 100644 libjpegtwrp/makefile.ansi delete mode 100644 libjpegtwrp/makefile.bcc delete mode 100644 libjpegtwrp/makefile.cfg delete mode 100644 libjpegtwrp/makefile.dj delete mode 100644 libjpegtwrp/makefile.manx delete mode 100644 libjpegtwrp/makefile.mc6 delete mode 100644 libjpegtwrp/makefile.mms delete mode 100644 libjpegtwrp/makefile.sas delete mode 100644 libjpegtwrp/makefile.unix delete mode 100644 libjpegtwrp/makefile.vc delete mode 100644 libjpegtwrp/makefile.vms delete mode 100644 libjpegtwrp/makefile.wat delete mode 100644 libjpegtwrp/makelib.ds delete mode 100644 libjpegtwrp/makeproj.mac delete mode 100644 libjpegtwrp/makljpeg.st delete mode 100644 libjpegtwrp/maktjpeg.st delete mode 100644 libjpegtwrp/makvms.opt delete mode 100644 libjpegtwrp/rdbmp.c delete mode 100644 libjpegtwrp/rdcolmap.c delete mode 100644 libjpegtwrp/rdgif.c delete mode 100644 libjpegtwrp/rdjpgcom.1 delete mode 100644 libjpegtwrp/rdjpgcom.c delete mode 100644 libjpegtwrp/rdppm.c delete mode 100644 libjpegtwrp/rdrle.c delete mode 100644 libjpegtwrp/rdswitch.c delete mode 100644 libjpegtwrp/rdtarga.c delete mode 100644 libjpegtwrp/structure.doc delete mode 100644 libjpegtwrp/testimg.bmp delete mode 100644 libjpegtwrp/testimg.jpg delete mode 100644 libjpegtwrp/testimg.ppm delete mode 100644 libjpegtwrp/testimgp.jpg delete mode 100644 libjpegtwrp/testorig.jpg delete mode 100644 libjpegtwrp/testprog.jpg delete mode 100644 libjpegtwrp/transupp.c delete mode 100644 libjpegtwrp/transupp.h delete mode 100644 libjpegtwrp/usage.doc delete mode 100644 libjpegtwrp/wizard.doc delete mode 100644 libjpegtwrp/wrbmp.c delete mode 100644 libjpegtwrp/wrgif.c delete mode 100644 libjpegtwrp/wrjpgcom.1 delete mode 100644 libjpegtwrp/wrjpgcom.c delete mode 100644 libjpegtwrp/wrppm.c delete mode 100644 libjpegtwrp/wrrle.c delete mode 100644 libjpegtwrp/wrtarga.c diff --git a/Android.mk b/Android.mk index 1471db1b1..183c79cc4 100644 --- a/Android.mk +++ b/Android.mk @@ -293,8 +293,7 @@ include $(LOCAL_PATH)/minui/Android.mk \ $(LOCAL_PATH)/applypatch/Android.mk #includes for TWRP -include $(commands_recovery_local_path)/libjpegtwrp/Android.mk \ - $(commands_recovery_local_path)/injecttwrp/Android.mk \ +include $(commands_recovery_local_path)/injecttwrp/Android.mk \ $(commands_recovery_local_path)/htcdumlock/Android.mk \ $(commands_recovery_local_path)/gui/Android.mk \ $(commands_recovery_local_path)/mmcutils/Android.mk \ diff --git a/libjpegtwrp/Android.mk b/libjpegtwrp/Android.mk deleted file mode 100755 index 98b253958..000000000 --- a/libjpegtwrp/Android.mk +++ /dev/null @@ -1,77 +0,0 @@ -LOCAL_PATH:= $(call my-dir) -include $(CLEAR_VARS) - -LOCAL_ARM_MODE := arm - -# Set ANDROID_JPEG_USE_VENUM to true to enable VeNum optimizations -ANDROID_JPEG_USE_VENUM := true - -# Disable VeNum optimizations if they are not supported on the build target -ifneq ($(ARCH_ARM_HAVE_VFP),true) -ANDROID_JPEG_USE_VENUM := false -else -ifneq ($(ARCH_ARM_HAVE_NEON),true) -ANDROID_JPEG_USE_VENUM := false -endif -endif - -LOCAL_SRC_FILES := \ - jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c \ - -# use ashmem as libjpeg decoder's backing store -LOCAL_CFLAGS += -DUSE_ANDROID_ASHMEM -LOCAL_SRC_FILES += \ - jmem-ashmem.c - -# the original android memory manager. -# use sdcard as libjpeg decoder's backing store -#LOCAL_SRC_FILES += \ -# jmem-android.c - - -# the assembler is only for the ARM version, don't break the Linux sim -ifneq ($(TARGET_ARCH),arm) -ANDROID_JPEG_NO_ASSEMBLER := true -endif - -ifeq ($(strip $(ANDROID_JPEG_NO_ASSEMBLER)),true) -LOCAL_SRC_FILES += jidctint.c jidctfst.c jidctred.c -else -ifeq ($(ANDROID_JPEG_USE_VENUM),true) -LOCAL_SRC_FILES += jidctvenum.c -LOCAL_SRC_FILES += asm/armv7/jdcolor-armv7.S -LOCAL_SRC_FILES += asm/armv7/jdcolor-android-armv7.S -LOCAL_SRC_FILES += asm/armv7/jdidct-armv7.S -LOCAL_CFLAGS += -DANDROID_JPEG_USE_VENUM -else # ANDROID_JPEG_USE_VENUM, false -LOCAL_SRC_FILES += jidctint.c jidctred.c jidctfst.c armv6_idct.S -LOCAL_CFLAGS += -DANDROID_ARMV6_IDCT -endif # ANDROID_JPEG_USE_VENUM -endif - -LOCAL_CFLAGS += -DAVOID_TABLES -LOCAL_CFLAGS += -O3 -fstrict-aliasing -fprefetch-loop-arrays - -# enable tile based decode -LOCAL_CFLAGS += -DANDROID_TILE_BASED_DECODE - -ifdef NEEDS_ARM_ERRATA_754319_754320 -asm_flags := \ - --defsym NEEDS_ARM_ERRATA_754319_754320_ASM=1 - -LOCAL_CFLAGS+= \ - $(foreach f,$(asm_flags),-Wa,"$(f)") -endif -LOCAL_MODULE_TAGS := eng -LOCAL_SHARED_LIBRARIES += libcutils -LOCAL_MODULE:= libjpegtwrp - -include $(BUILD_STATIC_LIBRARY) - diff --git a/libjpegtwrp/CleanSpec.mk b/libjpegtwrp/CleanSpec.mk deleted file mode 100644 index b84e1b65e..000000000 --- a/libjpegtwrp/CleanSpec.mk +++ /dev/null @@ -1,49 +0,0 @@ -# Copyright (C) 2007 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -# If you don't need to do a full clean build but would like to touch -# a file or delete some intermediate files, add a clean step to the end -# of the list. These steps will only be run once, if they haven't been -# run before. -# -# E.g.: -# $(call add-clean-step, touch -c external/sqlite/sqlite3.h) -# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates) -# -# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with -# files that are missing or have been moved. -# -# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory. -# Use $(OUT_DIR) to refer to the "out" directory. -# -# If you need to re-do something that's already mentioned, just copy -# the command and add it to the bottom of the list. E.g., if a change -# that you made last week required touching a file and a change you -# made today requires touching the same file, just copy the old -# touch step and add it to the end of the list. -# -# ************************************************ -# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST -# ************************************************ - -# For example: -#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates) -#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates) -#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f) -#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*) - -# ************************************************ -# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST -# ************************************************ diff --git a/libjpegtwrp/MODULE_LICENSE_BSD_LIKE b/libjpegtwrp/MODULE_LICENSE_BSD_LIKE deleted file mode 100644 index e69de29bb..000000000 diff --git a/libjpegtwrp/NOTICE b/libjpegtwrp/NOTICE deleted file mode 100644 index 007625fec..000000000 --- a/libjpegtwrp/NOTICE +++ /dev/null @@ -1,38 +0,0 @@ -This software is based in part on the work of the Independent JPEG Group. - ----------------------- - -The authors make NO WARRANTY or representation, either express or implied, -with respect to this software, its quality, accuracy, merchantability, or -fitness for a particular purpose. This software is provided "AS IS", and you, -its user, assume the entire risk as to its quality and accuracy. - -This software is copyright (C) 1991-1998, Thomas G. Lane. -All Rights Reserved except as specified below. - -Permission is hereby granted to use, copy, modify, and distribute this -software (or portions thereof) for any purpose, without fee, subject to these -conditions: -(1) If any part of the source code for this software is distributed, then this -README file must be included, with this copyright and no-warranty notice -unaltered; and any additions, deletions, or changes to the original files -must be clearly indicated in accompanying documentation. -(2) If only executable code is distributed, then the accompanying -documentation must state that "this software is based in part on the work of -the Independent JPEG Group". -(3) Permission for use of this software is granted only if the user accepts -full responsibility for any undesirable consequences; the authors accept -NO LIABILITY for damages of any kind. - -These conditions apply to any software derived from or based on the IJG code, -not just to the unmodified library. If you use our work, you ought to -acknowledge us. - -Permission is NOT granted for the use of any IJG author's name or company name -in advertising or publicity relating to this software or products derived from -it. This software may be referred to only as "the Independent JPEG Group's -software". - -We specifically permit and encourage the use of this software as the basis of -commercial products, provided that all warranty or liability claims are -assumed by the product vendor. diff --git a/libjpegtwrp/README b/libjpegtwrp/README deleted file mode 100644 index 86cc20669..000000000 --- a/libjpegtwrp/README +++ /dev/null @@ -1,385 +0,0 @@ -The Independent JPEG Group's JPEG software -========================================== - -README for release 6b of 27-Mar-1998 -==================================== - -This distribution contains the sixth public release of the Independent JPEG -Group's free JPEG software. You are welcome to redistribute this software and -to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. - -Serious users of this software (particularly those incorporating it into -larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to -our electronic mailing list. Mailing list members are notified of updates -and have a chance to participate in technical discussions, etc. - -This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, -Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, -Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG -Group. - -IJG is not affiliated with the official ISO JPEG standards committee. - - -DOCUMENTATION ROADMAP -===================== - -This file contains the following sections: - -OVERVIEW General description of JPEG and the IJG software. -LEGAL ISSUES Copyright, lack of warranty, terms of distribution. -REFERENCES Where to learn more about JPEG. -ARCHIVE LOCATIONS Where to find newer versions of this software. -RELATED SOFTWARE Other stuff you should get. -FILE FORMAT WARS Software *not* to get. -TO DO Plans for future IJG releases. - -Other documentation files in the distribution are: - -User documentation: - install.doc How to configure and install the IJG software. - usage.doc Usage instructions for cjpeg, djpeg, jpegtran, - rdjpgcom, and wrjpgcom. - *.1 Unix-style man pages for programs (same info as usage.doc). - wizard.doc Advanced usage instructions for JPEG wizards only. - change.log Version-to-version change highlights. -Programmer and internal documentation: - libjpeg.doc How to use the JPEG library in your own programs. - example.c Sample code for calling the JPEG library. - structure.doc Overview of the JPEG library's internal structure. - filelist.doc Road map of IJG files. - coderules.doc Coding style rules --- please read if you contribute code. - -Please read at least the files install.doc and usage.doc. Useful information -can also be found in the JPEG FAQ (Frequently Asked Questions) article. See -ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. - -If you want to understand how the JPEG code works, we suggest reading one or -more of the REFERENCES, then looking at the documentation files (in roughly -the order listed) before diving into the code. - - -OVERVIEW -======== - -This package contains C software to implement JPEG image compression and -decompression. JPEG (pronounced "jay-peg") is a standardized compression -method for full-color and gray-scale images. JPEG is intended for compressing -"real-world" scenes; line drawings, cartoons and other non-realistic images -are not its strong suit. JPEG is lossy, meaning that the output image is not -exactly identical to the input image. Hence you must not use JPEG if you -have to have identical output bits. However, on typical photographic images, -very good compression levels can be obtained with no visible change, and -remarkably high compression levels are possible if you can tolerate a -low-quality image. For more details, see the references, or just experiment -with various compression settings. - -This software implements JPEG baseline, extended-sequential, and progressive -compression processes. Provision is made for supporting all variants of these -processes, although some uncommon parameter settings aren't implemented yet. -For legal reasons, we are not distributing code for the arithmetic-coding -variants of JPEG; see LEGAL ISSUES. We have made no provision for supporting -the hierarchical or lossless processes defined in the standard. - -We provide a set of library routines for reading and writing JPEG image files, -plus two sample applications "cjpeg" and "djpeg", which use the library to -perform conversion between JPEG and some other popular image file formats. -The library is intended to be reused in other applications. - -In order to support file conversion and viewing software, we have included -considerable functionality beyond the bare JPEG coding/decoding capability; -for example, the color quantization modules are not strictly part of JPEG -decoding, but they are essential for output to colormapped file formats or -colormapped displays. These extra functions can be compiled out of the -library if not required for a particular application. We have also included -"jpegtran", a utility for lossless transcoding between different JPEG -processes, and "rdjpgcom" and "wrjpgcom", two simple applications for -inserting and extracting textual comments in JFIF files. - -The emphasis in designing this software has been on achieving portability and -flexibility, while also making it fast enough to be useful. In particular, -the software is not intended to be read as a tutorial on JPEG. (See the -REFERENCES section for introductory material.) Rather, it is intended to -be reliable, portable, industrial-strength code. We do not claim to have -achieved that goal in every aspect of the software, but we strive for it. - -We welcome the use of this software as a component of commercial products. -No royalty is required, but we do ask for an acknowledgement in product -documentation, as described under LEGAL ISSUES. - - -LEGAL ISSUES -============ - -In plain English: - -1. We don't promise that this software works. (But if you find any bugs, - please let us know!) -2. You can use this software for whatever you want. You don't have to pay us. -3. You may not pretend that you wrote this software. If you use it in a - program, you must acknowledge somewhere in your documentation that - you've used the IJG code. - -In legalese: - -The authors make NO WARRANTY or representation, either express or implied, -with respect to this software, its quality, accuracy, merchantability, or -fitness for a particular purpose. This software is provided "AS IS", and you, -its user, assume the entire risk as to its quality and accuracy. - -This software is copyright (C) 1991-1998, Thomas G. Lane. -All Rights Reserved except as specified below. - -Permission is hereby granted to use, copy, modify, and distribute this -software (or portions thereof) for any purpose, without fee, subject to these -conditions: -(1) If any part of the source code for this software is distributed, then this -README file must be included, with this copyright and no-warranty notice -unaltered; and any additions, deletions, or changes to the original files -must be clearly indicated in accompanying documentation. -(2) If only executable code is distributed, then the accompanying -documentation must state that "this software is based in part on the work of -the Independent JPEG Group". -(3) Permission for use of this software is granted only if the user accepts -full responsibility for any undesirable consequences; the authors accept -NO LIABILITY for damages of any kind. - -These conditions apply to any software derived from or based on the IJG code, -not just to the unmodified library. If you use our work, you ought to -acknowledge us. - -Permission is NOT granted for the use of any IJG author's name or company name -in advertising or publicity relating to this software or products derived from -it. This software may be referred to only as "the Independent JPEG Group's -software". - -We specifically permit and encourage the use of this software as the basis of -commercial products, provided that all warranty or liability claims are -assumed by the product vendor. - - -ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, -sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. -ansi2knr.c is NOT covered by the above copyright and conditions, but instead -by the usual distribution terms of the Free Software Foundation; principally, -that you must include source code if you redistribute it. (See the file -ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part -of any program generated from the IJG code, this does not limit you more than -the foregoing paragraphs do. - -The Unix configuration script "configure" was produced with GNU Autoconf. -It is copyright by the Free Software Foundation but is freely distributable. -The same holds for its supporting scripts (config.guess, config.sub, -ltconfig, ltmain.sh). Another support script, install-sh, is copyright -by M.I.T. but is also freely distributable. - -It appears that the arithmetic coding option of the JPEG spec is covered by -patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot -legally be used without obtaining one or more licenses. For this reason, -support for arithmetic coding has been removed from the free JPEG software. -(Since arithmetic coding provides only a marginal gain over the unpatented -Huffman mode, it is unlikely that very many implementations will support it.) -So far as we are aware, there are no patent restrictions on the remaining -code. - -The IJG distribution formerly included code to read and write GIF files. -To avoid entanglement with the Unisys LZW patent, GIF reading support has -been removed altogether, and the GIF writer has been simplified to produce -"uncompressed GIFs". This technique does not use the LZW algorithm; the -resulting GIF files are larger than usual, but are readable by all standard -GIF decoders. - -We are required to state that - "The Graphics Interchange Format(c) is the Copyright property of - CompuServe Incorporated. GIF(sm) is a Service Mark property of - CompuServe Incorporated." - - -REFERENCES -========== - -We highly recommend reading one or more of these references before trying to -understand the innards of the JPEG software. - -The best short technical introduction to the JPEG compression algorithm is - Wallace, Gregory K. "The JPEG Still Picture Compression Standard", - Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. -(Adjacent articles in that issue discuss MPEG motion picture compression, -applications of JPEG, and related topics.) If you don't have the CACM issue -handy, a PostScript file containing a revised version of Wallace's article is -available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually -a preprint for an article that appeared in IEEE Trans. Consumer Electronics) -omits the sample images that appeared in CACM, but it includes corrections -and some added material. Note: the Wallace article is copyright ACM and IEEE, -and it may not be used for commercial purposes. - -A somewhat less technical, more leisurely introduction to JPEG can be found in -"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by -M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides -good explanations and example C code for a multitude of compression methods -including JPEG. It is an excellent source if you are comfortable reading C -code but don't know much about data compression in general. The book's JPEG -sample code is far from industrial-strength, but when you are ready to look -at a full implementation, you've got one here... - -The best full description of JPEG is the textbook "JPEG Still Image Data -Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published -by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. -The book includes the complete text of the ISO JPEG standards (DIS 10918-1 -and draft DIS 10918-2). This is by far the most complete exposition of JPEG -in existence, and we highly recommend it. - -The JPEG standard itself is not available electronically; you must order a -paper copy through ISO or ITU. (Unless you feel a need to own a certified -official copy, we recommend buying the Pennebaker and Mitchell book instead; -it's much cheaper and includes a great deal of useful explanatory material.) -In the USA, copies of the standard may be ordered from ANSI Sales at (212) -642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI -doesn't take credit card orders, but Global does.) It's not cheap: as of -1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7% -shipping/handling. The standard is divided into two parts, Part 1 being the -actual specification, while Part 2 covers compliance testing methods. Part 1 -is titled "Digital Compression and Coding of Continuous-tone Still Images, -Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS -10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of -Continuous-tone Still Images, Part 2: Compliance testing" and has document -numbers ISO/IEC IS 10918-2, ITU-T T.83. - -Some extensions to the original JPEG standard are defined in JPEG Part 3, -a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG -currently does not support any Part 3 extensions. - -The JPEG standard does not specify all details of an interchangeable file -format. For the omitted details we follow the "JFIF" conventions, revision -1.02. A copy of the JFIF spec is available from: - Literature Department - C-Cube Microsystems, Inc. - 1778 McCarthy Blvd. - Milpitas, CA 95035 - phone (408) 944-6300, fax (408) 944-6314 -A PostScript version of this document is available by FTP at -ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text -version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing -the figures. - -The TIFF 6.0 file format specification can be obtained by FTP from -ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme -found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. -IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). -Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 -(Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or -from ftp://ftp.uu.net/graphics/jpeg/. It is expected that the next revision -of the TIFF spec will replace the 6.0 JPEG design with the Note's design. -Although IJG's own code does not support TIFF/JPEG, the free libtiff library -uses our library to implement TIFF/JPEG per the Note. libtiff is available -from ftp://ftp.sgi.com/graphics/tiff/. - - -ARCHIVE LOCATIONS -================= - -The "official" archive site for this software is ftp.uu.net (Internet -address 192.48.96.9). The most recent released version can always be found -there in directory graphics/jpeg. This particular version will be archived -as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you don't have -direct Internet access, UUNET's archives are also available via UUCP; contact -help@uunet.uu.net for information on retrieving files that way. - -Numerous Internet sites maintain copies of the UUNET files. However, only -ftp.uu.net is guaranteed to have the latest official version. - -You can also obtain this software in DOS-compatible "zip" archive format from -the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or -on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 -"JPEG Tools". Again, these versions may sometimes lag behind the ftp.uu.net -release. - -The JPEG FAQ (Frequently Asked Questions) article is a useful source of -general information about JPEG. It is updated constantly and therefore is -not included in this distribution. The FAQ is posted every two weeks to -Usenet newsgroups comp.graphics.misc, news.answers, and other groups. -It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ -and other news.answers archive sites, including the official news.answers -archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. -If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu -with body - send usenet/news.answers/jpeg-faq/part1 - send usenet/news.answers/jpeg-faq/part2 - - -RELATED SOFTWARE -================ - -Numerous viewing and image manipulation programs now support JPEG. (Quite a -few of them use this library to do so.) The JPEG FAQ described above lists -some of the more popular free and shareware viewers, and tells where to -obtain them on Internet. - -If you are on a Unix machine, we highly recommend Jef Poskanzer's free -PBMPLUS software, which provides many useful operations on PPM-format image -files. In particular, it can convert PPM images to and from a wide range of -other formats, thus making cjpeg/djpeg considerably more useful. The latest -version is distributed by the NetPBM group, and is available from numerous -sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/. -Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is; -you are likely to have difficulty making it work on any non-Unix machine. - -A different free JPEG implementation, written by the PVRG group at Stanford, -is available from ftp://havefun.stanford.edu/pub/jpeg/. This program -is designed for research and experimentation rather than production use; -it is slower, harder to use, and less portable than the IJG code, but it -is easier to read and modify. Also, the PVRG code supports lossless JPEG, -which we do not. (On the other hand, it doesn't do progressive JPEG.) - - -FILE FORMAT WARS -================ - -Some JPEG programs produce files that are not compatible with our library. -The root of the problem is that the ISO JPEG committee failed to specify a -concrete file format. Some vendors "filled in the blanks" on their own, -creating proprietary formats that no one else could read. (For example, none -of the early commercial JPEG implementations for the Macintosh were able to -exchange compressed files.) - -The file format we have adopted is called JFIF (see REFERENCES). This format -has been agreed to by a number of major commercial JPEG vendors, and it has -become the de facto standard. JFIF is a minimal or "low end" representation. -We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF -Technical Note #2) for "high end" applications that need to record a lot of -additional data about an image. TIFF/JPEG is fairly new and not yet widely -supported, unfortunately. - -The upcoming JPEG Part 3 standard defines a file format called SPIFF. -SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should -be able to read the most common variant of SPIFF. SPIFF has some technical -advantages over JFIF, but its major claim to fame is simply that it is an -official standard rather than an informal one. At this point it is unclear -whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto -standard. IJG intends to support SPIFF once the standard is frozen, but we -have not decided whether it should become our default output format or not. -(In any case, our decoder will remain capable of reading JFIF indefinitely.) - -Various proprietary file formats incorporating JPEG compression also exist. -We have little or no sympathy for the existence of these formats. Indeed, -one of the original reasons for developing this free software was to help -force convergence on common, open format standards for JPEG files. Don't -use a proprietary file format! - - -TO DO -===== - -The major thrust for v7 will probably be improvement of visual quality. -The current method for scaling the quantization tables is known not to be -very good at low Q values. We also intend to investigate block boundary -smoothing, "poor man's variable quantization", and other means of improving -quality-vs-file-size performance without sacrificing compatibility. - -In future versions, we are considering supporting some of the upcoming JPEG -Part 3 extensions --- principally, variable quantization and the SPIFF file -format. - -As always, speeding things up is of great interest. - -Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net. diff --git a/libjpegtwrp/README-VeNum b/libjpegtwrp/README-VeNum deleted file mode 100644 index ee51449c7..000000000 --- a/libjpegtwrp/README-VeNum +++ /dev/null @@ -1,20 +0,0 @@ -README-VeNum -Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum -================================================================= - -Consumers are increasingly browsing Web based photo galleries incorporating -high-resolution JPEG images with their mobile devices. These images are -decoded by the mobile device, and typically also scaled down to fit the user's -zoom selection on the device's browser. - -In order to improve both decode and download times, Qualcomm Innovation Center -has optimized the JPEG library found on many common OS platforms such as Web -OS, Android, and Chrome OS. Our team re-implemented several routines to utilize the -DSP-like SIMD capabilities of the ARM NEON instruction set. These were then -tuned and tested on Qualcomm's Snapdragon platform which implements the VeNum -implementation of these same instructions. - -The specific areas of focus cover VeNum/NEON acceleration of Inverse Discrete -Cosine Transform (iDCT) for 8x8, 4x4, 2x2, and 1x1 block sizes and YUV to RGB -color space conversion. This resulted in a range of 18-32% improvement in JPEG -decode and downscale times for images greater than 2Mpixels. diff --git a/libjpegtwrp/ThirdPartyProject.prop b/libjpegtwrp/ThirdPartyProject.prop deleted file mode 100644 index e88cc6355..000000000 --- a/libjpegtwrp/ThirdPartyProject.prop +++ /dev/null @@ -1,9 +0,0 @@ -# Copyright 2010 Google Inc. All Rights Reserved. -#Fri Jul 16 10:03:09 PDT 2010 -currentVersion=8a -version=6b -isNative=true -name=jpeg -keywords=jpeg -onDevice=true -homepage=http\://www.ijg.org/ diff --git a/libjpegtwrp/ansi2knr.1 b/libjpegtwrp/ansi2knr.1 deleted file mode 100644 index f9ee5a631..000000000 --- a/libjpegtwrp/ansi2knr.1 +++ /dev/null @@ -1,36 +0,0 @@ -.TH ANSI2KNR 1 "19 Jan 1996" -.SH NAME -ansi2knr \- convert ANSI C to Kernighan & Ritchie C -.SH SYNOPSIS -.I ansi2knr -[--varargs] input_file [output_file] -.SH DESCRIPTION -If no output_file is supplied, output goes to stdout. -.br -There are no error messages. -.sp -.I ansi2knr -recognizes function definitions by seeing a non-keyword identifier at the left -margin, followed by a left parenthesis, with a right parenthesis as the last -character on the line, and with a left brace as the first token on the -following line (ignoring possible intervening comments). It will recognize a -multi-line header provided that no intervening line ends with a left or right -brace or a semicolon. These algorithms ignore whitespace and comments, except -that the function name must be the first thing on the line. -.sp -The following constructs will confuse it: -.br - - Any other construct that starts at the left margin and follows the -above syntax (such as a macro or function call). -.br - - Some macros that tinker with the syntax of the function header. -.sp -The --varargs switch is obsolete, and is recognized only for -backwards compatibility. The present version of -.I ansi2knr -will always attempt to convert a ... argument to va_alist and va_dcl. -.SH AUTHOR -L. Peter Deutsch wrote the original ansi2knr and -continues to maintain the current version; most of the code in the current -version is his work. ansi2knr also includes contributions by Francois -Pinard and Jim Avera . diff --git a/libjpegtwrp/ansi2knr.c b/libjpegtwrp/ansi2knr.c deleted file mode 100644 index 4e05fc2d3..000000000 --- a/libjpegtwrp/ansi2knr.c +++ /dev/null @@ -1,693 +0,0 @@ -/* ansi2knr.c */ -/* Convert ANSI C function definitions to K&R ("traditional C") syntax */ - -/* -ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY. No author or distributor accepts responsibility to anyone for the -consequences of using it or for whether it serves any particular purpose or -works at all, unless he says so in writing. Refer to the GNU General Public -License (the "GPL") for full details. - -Everyone is granted permission to copy, modify and redistribute ansi2knr, -but only under the conditions described in the GPL. A copy of this license -is supposed to have been given to you along with ansi2knr so you can know -your rights and responsibilities. It should be in a file named COPYLEFT. -[In the IJG distribution, the GPL appears below, not in a separate file.] -Among other things, the copyright notice and this notice must be preserved -on all copies. - -We explicitly state here what we believe is already implied by the GPL: if -the ansi2knr program is distributed as a separate set of sources and a -separate executable file which are aggregated on a storage medium together -with another program, this in itself does not bring the other program under -the GPL, nor does the mere fact that such a program or the procedures for -constructing it invoke the ansi2knr executable bring any other part of the -program under the GPL. -*/ - -/* ----------- Here is the GNU GPL file COPYLEFT, referred to above ---------- ------ These terms do NOT apply to the JPEG software itself; see README ------ - - GHOSTSCRIPT GENERAL PUBLIC LICENSE - (Clarified 11 Feb 1988) - - Copyright (C) 1988 Richard M. Stallman - Everyone is permitted to copy and distribute verbatim copies of this - license, but changing it is not allowed. You can also use this wording - to make the terms for other programs. - - The license agreements of most software companies keep you at the -mercy of those companies. By contrast, our general public license is -intended to give everyone the right to share Ghostscript. To make sure -that you get the rights we want you to have, we need to make -restrictions that forbid anyone to deny you these rights or to ask you -to surrender the rights. Hence this license agreement. - - Specifically, we want to make sure that you have the right to give -away copies of Ghostscript, that you receive source code or else can get -it if you want it, that you can change Ghostscript or use pieces of it -in new free programs, and that you know you can do these things. - - To make sure that everyone has such rights, we have to forbid you to -deprive anyone else of these rights. For example, if you distribute -copies of Ghostscript, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must tell them their rights. - - Also, for our own protection, we must make certain that everyone finds -out that there is no warranty for Ghostscript. If Ghostscript is -modified by someone else and passed on, we want its recipients to know -that what they have is not what we distributed, so that any problems -introduced by others will not reflect on our reputation. - - Therefore we (Richard M. Stallman and the Free Software Foundation, -Inc.) make the following terms which say what you must do to be allowed -to distribute or change Ghostscript. - - - COPYING POLICIES - - 1. You may copy and distribute verbatim copies of Ghostscript source -code as you receive it, in any medium, provided that you conspicuously -and appropriately publish on each copy a valid copyright and license -notice "Copyright (C) 1989 Aladdin Enterprises. All rights reserved. -Distributed by Free Software Foundation, Inc." (or with whatever year is -appropriate); keep intact the notices on all files that refer to this -License Agreement and to the absence of any warranty; and give any other -recipients of the Ghostscript program a copy of this License Agreement -along with the program. You may charge a distribution fee for the -physical act of transferring a copy. - - 2. You may modify your copy or copies of Ghostscript or any portion of -it, and copy and distribute such modifications under the terms of -Paragraph 1 above, provided that you also do the following: - - a) cause the modified files to carry prominent notices stating - that you changed the files and the date of any change; and - - b) cause the whole of any work that you distribute or publish, - that in whole or in part contains or is a derivative of Ghostscript - or any part thereof, to be licensed at no charge to all third - parties on terms identical to those contained in this License - Agreement (except that you may choose to grant more extensive - warranty protection to some or all third parties, at your option). - - c) You may charge a distribution fee for the physical act of - transferring a copy, and you may at your option offer warranty - protection in exchange for a fee. - -Mere aggregation of another unrelated program with this program (or its -derivative) on a volume of a storage or distribution medium does not bring -the other program under the scope of these terms. - - 3. You may copy and distribute Ghostscript (or a portion or derivative -of it, under Paragraph 2) in object code or executable form under the -terms of Paragraphs 1 and 2 above provided that you also do one of the -following: - - a) accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of - Paragraphs 1 and 2 above; or, - - b) accompany it with a written offer, valid for at least three - years, to give any third party free (except for a nominal - shipping charge) a complete machine-readable copy of the - corresponding source code, to be distributed under the terms of - Paragraphs 1 and 2 above; or, - - c) accompany it with the information you received as to where the - corresponding source code may be obtained. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form alone.) - -For an executable file, complete source code means all the source code for -all modules it contains; but, as a special exception, it need not include -source code for modules which are standard libraries that accompany the -operating system on which the executable file runs. - - 4. You may not copy, sublicense, distribute or transfer Ghostscript -except as expressly provided under this License Agreement. Any attempt -otherwise to copy, sublicense, distribute or transfer Ghostscript is -void and your rights to use the program under this License agreement -shall be automatically terminated. However, parties who have received -computer software programs from you with this License Agreement will not -have their licenses terminated so long as such parties remain in full -compliance. - - 5. If you wish to incorporate parts of Ghostscript into other free -programs whose distribution conditions are different, write to the Free -Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not -yet worked out a simple rule that can be stated here, but we will often -permit this. We will be guided by the two goals of preserving the free -status of all derivatives of our free software and of promoting the -sharing and reuse of software. - -Your comments and suggestions about our licensing policies and our -software are welcome! Please contact the Free Software Foundation, -Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296. - - NO WARRANTY - - BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY -NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT -WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD -M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES -PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER -EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE -ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH -YOU. SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL -NECESSARY SERVICING, REPAIR OR CORRECTION. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M. -STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN -ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE -GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING -ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR -CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE -(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED -INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE -PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU -HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM -BY ANY OTHER PARTY. - --------------------- End of file COPYLEFT ------------------------------ -*/ - -/* - * Usage: - ansi2knr input_file [output_file] - * If no output_file is supplied, output goes to stdout. - * There are no error messages. - * - * ansi2knr recognizes function definitions by seeing a non-keyword - * identifier at the left margin, followed by a left parenthesis, - * with a right parenthesis as the last character on the line, - * and with a left brace as the first token on the following line - * (ignoring possible intervening comments). - * It will recognize a multi-line header provided that no intervening - * line ends with a left or right brace or a semicolon. - * These algorithms ignore whitespace and comments, except that - * the function name must be the first thing on the line. - * The following constructs will confuse it: - * - Any other construct that starts at the left margin and - * follows the above syntax (such as a macro or function call). - * - Some macros that tinker with the syntax of the function header. - */ - -/* - * The original and principal author of ansi2knr is L. Peter Deutsch - * . Other authors are noted in the change history - * that follows (in reverse chronological order): - lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with - compilers that don't understand void, as suggested by - Tom Lane - lpd 96-01-15 changed to require that the first non-comment token - on the line following a function header be a left brace, - to reduce sensitivity to macros, as suggested by Tom Lane - - lpd 95-06-22 removed #ifndefs whose sole purpose was to define - undefined preprocessor symbols as 0; changed all #ifdefs - for configuration symbols to #ifs - lpd 95-04-05 changed copyright notice to make it clear that - including ansi2knr in a program does not bring the entire - program under the GPL - lpd 94-12-18 added conditionals for systems where ctype macros - don't handle 8-bit characters properly, suggested by - Francois Pinard ; - removed --varargs switch (this is now the default) - lpd 94-10-10 removed CONFIG_BROKETS conditional - lpd 94-07-16 added some conditionals to help GNU `configure', - suggested by Francois Pinard ; - properly erase prototype args in function parameters, - contributed by Jim Avera ; - correct error in writeblanks (it shouldn't erase EOLs) - lpd 89-xx-xx original version - */ - -/* Most of the conditionals here are to make ansi2knr work with */ -/* or without the GNU configure machinery. */ - -#if HAVE_CONFIG_H -# include -#endif - -#include -#include - -#if HAVE_CONFIG_H - -/* - For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). - This will define HAVE_CONFIG_H and so, activate the following lines. - */ - -# if STDC_HEADERS || HAVE_STRING_H -# include -# else -# include -# endif - -#else /* not HAVE_CONFIG_H */ - -/* Otherwise do it the hard way */ - -# ifdef BSD -# include -# else -# ifdef VMS - extern int strlen(), strncmp(); -# else -# include -# endif -# endif - -#endif /* not HAVE_CONFIG_H */ - -#if STDC_HEADERS -# include -#else -/* - malloc and free should be declared in stdlib.h, - but if you've got a K&R compiler, they probably aren't. - */ -# ifdef MSDOS -# include -# else -# ifdef VMS - extern char *malloc(); - extern void free(); -# else - extern char *malloc(); - extern int free(); -# endif -# endif - -#endif - -/* - * The ctype macros don't always handle 8-bit characters correctly. - * Compensate for this here. - */ -#ifdef isascii -# undef HAVE_ISASCII /* just in case */ -# define HAVE_ISASCII 1 -#else -#endif -#if STDC_HEADERS || !HAVE_ISASCII -# define is_ascii(c) 1 -#else -# define is_ascii(c) isascii(c) -#endif - -#define is_space(c) (is_ascii(c) && isspace(c)) -#define is_alpha(c) (is_ascii(c) && isalpha(c)) -#define is_alnum(c) (is_ascii(c) && isalnum(c)) - -/* Scanning macros */ -#define isidchar(ch) (is_alnum(ch) || (ch) == '_') -#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') - -/* Forward references */ -char *skipspace(); -int writeblanks(); -int test1(); -int convert1(); - -/* The main program */ -int -main(argc, argv) - int argc; - char *argv[]; -{ FILE *in, *out; -#define bufsize 5000 /* arbitrary size */ - char *buf; - char *line; - char *more; - /* - * In previous versions, ansi2knr recognized a --varargs switch. - * If this switch was supplied, ansi2knr would attempt to convert - * a ... argument to va_alist and va_dcl; if this switch was not - * supplied, ansi2knr would simply drop any such arguments. - * Now, ansi2knr always does this conversion, and we only - * check for this switch for backward compatibility. - */ - int convert_varargs = 1; - - if ( argc > 1 && argv[1][0] == '-' ) - { if ( !strcmp(argv[1], "--varargs") ) - { convert_varargs = 1; - argc--; - argv++; - } - else - { fprintf(stderr, "Unrecognized switch: %s\n", argv[1]); - exit(1); - } - } - switch ( argc ) - { - default: - printf("Usage: ansi2knr input_file [output_file]\n"); - exit(0); - case 2: - out = stdout; - break; - case 3: - out = fopen(argv[2], "w"); - if ( out == NULL ) - { fprintf(stderr, "Cannot open output file %s\n", argv[2]); - exit(1); - } - } - in = fopen(argv[1], "r"); - if ( in == NULL ) - { fprintf(stderr, "Cannot open input file %s\n", argv[1]); - exit(1); - } - fprintf(out, "#line 1 \"%s\"\n", argv[1]); - buf = malloc(bufsize); - line = buf; - while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) - { -test: line += strlen(line); - switch ( test1(buf) ) - { - case 2: /* a function header */ - convert1(buf, out, 1, convert_varargs); - break; - case 1: /* a function */ - /* Check for a { at the start of the next line. */ - more = ++line; -f: if ( line >= buf + (bufsize - 1) ) /* overflow check */ - goto wl; - if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL ) - goto wl; - switch ( *skipspace(more, 1) ) - { - case '{': - /* Definitely a function header. */ - convert1(buf, out, 0, convert_varargs); - fputs(more, out); - break; - case 0: - /* The next line was blank or a comment: */ - /* keep scanning for a non-comment. */ - line += strlen(line); - goto f; - default: - /* buf isn't a function header, but */ - /* more might be. */ - fputs(buf, out); - strcpy(buf, more); - line = buf; - goto test; - } - break; - case -1: /* maybe the start of a function */ - if ( line != buf + (bufsize - 1) ) /* overflow check */ - continue; - /* falls through */ - default: /* not a function */ -wl: fputs(buf, out); - break; - } - line = buf; - } - if ( line != buf ) - fputs(buf, out); - free(buf); - fclose(out); - fclose(in); - return 0; -} - -/* Skip over space and comments, in either direction. */ -char * -skipspace(p, dir) - register char *p; - register int dir; /* 1 for forward, -1 for backward */ -{ for ( ; ; ) - { while ( is_space(*p) ) - p += dir; - if ( !(*p == '/' && p[dir] == '*') ) - break; - p += dir; p += dir; - while ( !(*p == '*' && p[dir] == '/') ) - { if ( *p == 0 ) - return p; /* multi-line comment?? */ - p += dir; - } - p += dir; p += dir; - } - return p; -} - -/* - * Write blanks over part of a string. - * Don't overwrite end-of-line characters. - */ -int -writeblanks(start, end) - char *start; - char *end; -{ char *p; - for ( p = start; p < end; p++ ) - if ( *p != '\r' && *p != '\n' ) - *p = ' '; - return 0; -} - -/* - * Test whether the string in buf is a function definition. - * The string may contain and/or end with a newline. - * Return as follows: - * 0 - definitely not a function definition; - * 1 - definitely a function definition; - * 2 - definitely a function prototype (NOT USED); - * -1 - may be the beginning of a function definition, - * append another line and look again. - * The reason we don't attempt to convert function prototypes is that - * Ghostscript's declaration-generating macros look too much like - * prototypes, and confuse the algorithms. - */ -int -test1(buf) - char *buf; -{ register char *p = buf; - char *bend; - char *endfn; - int contin; - - if ( !isidfirstchar(*p) ) - return 0; /* no name at left margin */ - bend = skipspace(buf + strlen(buf) - 1, -1); - switch ( *bend ) - { - case ';': contin = 0 /*2*/; break; - case ')': contin = 1; break; - case '{': return 0; /* not a function */ - case '}': return 0; /* not a function */ - default: contin = -1; - } - while ( isidchar(*p) ) - p++; - endfn = p; - p = skipspace(p, 1); - if ( *p++ != '(' ) - return 0; /* not a function */ - p = skipspace(p, 1); - if ( *p == ')' ) - return 0; /* no parameters */ - /* Check that the apparent function name isn't a keyword. */ - /* We only need to check for keywords that could be followed */ - /* by a left parenthesis (which, unfortunately, is most of them). */ - { static char *words[] = - { "asm", "auto", "case", "char", "const", "double", - "extern", "float", "for", "if", "int", "long", - "register", "return", "short", "signed", "sizeof", - "static", "switch", "typedef", "unsigned", - "void", "volatile", "while", 0 - }; - char **key = words; - char *kp; - int len = endfn - buf; - - while ( (kp = *key) != 0 ) - { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) - return 0; /* name is a keyword */ - key++; - } - } - return contin; -} - -/* Convert a recognized function definition or header to K&R syntax. */ -int -convert1(buf, out, header, convert_varargs) - char *buf; - FILE *out; - int header; /* Boolean */ - int convert_varargs; /* Boolean */ -{ char *endfn; - register char *p; - char **breaks; - unsigned num_breaks = 2; /* for testing */ - char **btop; - char **bp; - char **ap; - char *vararg = 0; - - /* Pre-ANSI implementations don't agree on whether strchr */ - /* is called strchr or index, so we open-code it here. */ - for ( endfn = buf; *(endfn++) != '('; ) - ; -top: p = endfn; - breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); - if ( breaks == 0 ) - { /* Couldn't allocate break table, give up */ - fprintf(stderr, "Unable to allocate break table!\n"); - fputs(buf, out); - return -1; - } - btop = breaks + num_breaks * 2 - 2; - bp = breaks; - /* Parse the argument list */ - do - { int level = 0; - char *lp = NULL; - char *rp; - char *end = NULL; - - if ( bp >= btop ) - { /* Filled up break table. */ - /* Allocate a bigger one and start over. */ - free((char *)breaks); - num_breaks <<= 1; - goto top; - } - *bp++ = p; - /* Find the end of the argument */ - for ( ; end == NULL; p++ ) - { switch(*p) - { - case ',': - if ( !level ) end = p; - break; - case '(': - if ( !level ) lp = p; - level++; - break; - case ')': - if ( --level < 0 ) end = p; - else rp = p; - break; - case '/': - p = skipspace(p, 1) - 1; - break; - default: - ; - } - } - /* Erase any embedded prototype parameters. */ - if ( lp ) - writeblanks(lp + 1, rp); - p--; /* back up over terminator */ - /* Find the name being declared. */ - /* This is complicated because of procedure and */ - /* array modifiers. */ - for ( ; ; ) - { p = skipspace(p - 1, -1); - switch ( *p ) - { - case ']': /* skip array dimension(s) */ - case ')': /* skip procedure args OR name */ - { int level = 1; - while ( level ) - switch ( *--p ) - { - case ']': case ')': level++; break; - case '[': case '(': level--; break; - case '/': p = skipspace(p, -1) + 1; break; - default: ; - } - } - if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) - { /* We found the name being declared */ - while ( !isidfirstchar(*p) ) - p = skipspace(p, 1) + 1; - goto found; - } - break; - default: - goto found; - } - } -found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) - { if ( convert_varargs ) - { *bp++ = "va_alist"; - vararg = p-2; - } - else - { p++; - if ( bp == breaks + 1 ) /* sole argument */ - writeblanks(breaks[0], p); - else - writeblanks(bp[-1] - 1, p); - bp--; - } - } - else - { while ( isidchar(*p) ) p--; - *bp++ = p+1; - } - p = end; - } - while ( *p++ == ',' ); - *bp = p; - /* Make a special check for 'void' arglist */ - if ( bp == breaks+2 ) - { p = skipspace(breaks[0], 1); - if ( !strncmp(p, "void", 4) ) - { p = skipspace(p+4, 1); - if ( p == breaks[2] - 1 ) - { bp = breaks; /* yup, pretend arglist is empty */ - writeblanks(breaks[0], p + 1); - } - } - } - /* Put out the function name and left parenthesis. */ - p = buf; - while ( p != endfn ) putc(*p, out), p++; - /* Put out the declaration. */ - if ( header ) - { fputs(");", out); - for ( p = breaks[0]; *p; p++ ) - if ( *p == '\r' || *p == '\n' ) - putc(*p, out); - } - else - { for ( ap = breaks+1; ap < bp; ap += 2 ) - { p = *ap; - while ( isidchar(*p) ) - putc(*p, out), p++; - if ( ap < bp - 1 ) - fputs(", ", out); - } - fputs(") ", out); - /* Put out the argument declarations */ - for ( ap = breaks+2; ap <= bp; ap += 2 ) - (*ap)[-1] = ';'; - if ( vararg != 0 ) - { *vararg = 0; - fputs(breaks[0], out); /* any prior args */ - fputs("va_dcl", out); /* the final arg */ - fputs(bp[0], out); - } - else - fputs(breaks[0], out); - } - free((char *)breaks); - return 0; -} diff --git a/libjpegtwrp/armv6_idct.S b/libjpegtwrp/armv6_idct.S deleted file mode 100644 index 18e4e8a18..000000000 --- a/libjpegtwrp/armv6_idct.S +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* - * This is a fast-and-accurate implementation of inverse Discrete Cosine - * Transform (IDCT) for ARMv6+. It also performs dequantization of the input - * coefficients just like other methods. - * - * This implementation is based on the scaled 1-D DCT algorithm proposed by - * Arai, Agui, and Nakajima. The following code is based on the figure 4-8 - * on page 52 of the JPEG textbook by Pennebaker and Mitchell. Coefficients - * are (almost) directly mapped into registers. - * - * The accuracy is achieved by using SMULWy and SMLAWy instructions. Both - * multiply 32 bits by 16 bits and store the top 32 bits of the result. It - * makes 32-bit fixed-point arithmetic possible without overflow. That is - * why jpeg_idct_ifast(), which is written in C, cannot be improved. - * - * More tricks are used to gain more speed. First of all, we use as many - * registers as possible. ARM processor has 16 registers including sp (r13) - * and pc (r15), so only 14 registers can be used without limitations. In - * general, we let r0 to r7 hold the coefficients; r10 and r11 hold four - * 16-bit constants; r12 and r14 hold two of the four arguments; and r8 hold - * intermediate value. In the second pass, r9 is the loop counter. In the - * first pass, r8 to r11 are used to hold quantization values, so the loop - * counter is held by sp. Yes, the stack pointer. Since it must be aligned - * to 4-byte boundary all the time, we align it to 32-byte boundary and use - * bit 3 to bit 5. As the result, we actually use 14.1 registers. :-) - * - * Second, we rearrange quantization values to access them sequentially. The - * table is first transposed, and the new columns are placed in the order of - * 7, 5, 1, 3, 0, 2, 4, 6. Thus we can use LDMDB to load four values at a - * time. Rearranging coefficients also helps, but that requires to change a - * dozen of files, which seems not worth it. In addition, we choose to scale - * up quantization values by 13 bits, so the coefficients are scaled up by - * 16 bits after both passes. Then we can pack and saturate them two at a - * time using PKHTB and USAT16 instructions. - * - * Third, we reorder the instructions to avoid bubbles in the pipeline. This - * is done by hand accroding to the cycle timings and the interlock behavior - * described in the technical reference manual of ARM1136JF-S. We also take - * advantage of dual issue processors by interleaving instructions with - * dependencies. It has been benchmarked on four devices and all the results - * showed distinguishable improvements. Note that PLD instructions actually - * slow things down, so they are removed at the last minute. In the future, - * this might be futher improved using a system profiler. - */ - -#ifdef __arm__ -#include -#endif - -#if __ARM_ARCH__ >= 6 - -// void armv6_idct(short *coefs, int *quans, unsigned char *rows, int col) - .arm - .text - .align - .global armv6_idct - .func armv6_idct - -armv6_idct: - // Push everything except sp (r13) and pc (r15). - stmdb sp!, {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14} - - // r12 = quans, r14 = coefs. - sub r4, sp, #236 - bic sp, r4, #31 - add r5, sp, #224 - add r12, r1, #256 - stm r5, {r2, r3, r4} - add r14, r0, #16 - -pass1_head: - // Load quantization values. (q[0, 2, 4, 6]) - ldmdb r12!, {r8, r9, r10, r11} - - // Load coefficients. (c[4, 1, 2, 3, 0, 5, 6, 7]) - ldrsh r4, [r14, #-2] ! - ldrsh r1, [r14, #16] - ldrsh r2, [r14, #32] - ldrsh r3, [r14, #48] - ldrsh r0, [r14, #64] - ldrsh r5, [r14, #80] - ldrsh r6, [r14, #96] - ldrsh r7, [r14, #112] - - // r4 = q[0] * c[0]; - mul r4, r8, r4 - - // Check if ACs are all zero. - cmp r0, #0 - orreqs r8, r1, r2 - orreqs r8, r3, r5 - orreqs r8, r6, r7 - beq pass1_zero - - // Step 1: Dequantizations. - - // r2 = q[2] * c[2]; - // r0 = q[4] * c[4] + r4; - // r6 = q[6] * c[6] + r2; - mul r2, r9, r2 - mla r0, r10, r0, r4 - mla r6, r11, r6, r2 - - // Load quantization values. (q[7, 5, 1, 3]) - ldmdb r12!, {r8, r9, r10, r11} - - // r4 = r4 * 2 - r0 = -(r0 - r4 * 2); - // r2 = r2 * 2 - r6 = -(r6 - r2 * 2); - rsb r4, r0, r4, lsl #1 - rsb r2, r6, r2, lsl #1 - - // r7 = q[7] * c[7]; - // r5 = q[5] * c[5]; - // r1 = q[1] * c[1] + r7; - // r3 = q[3] * c[3] + r5; - mul r7, r8, r7 - mul r5, r9, r5 - mla r1, r10, r1, r7 - mla r3, r11, r3, r5 - - // Load constants. - ldrd r10, constants - - // Step 2: Rotations and Butterflies. - - // r7 = r1 - r7 * 2; - // r1 = r1 - r3; - // r5 = r5 * 2 - r3 = -(r3 - r5 * 2); - // r3 = r1 + r3 * 2; - // r8 = r5 + r7; - sub r7, r1, r7, lsl #1 - sub r1, r1, r3 - rsb r5, r3, r5, lsl #1 - add r3, r1, r3, lsl #1 - add r8, r5, r7 - - // r2 = r2 * 1.41421 = r2 * 27146 / 65536 + r2; - // r8 = r8 * 1.84776 / 8 = r8 * 15137 / 65536; - // r1 = r1 * 1.41421 = r1 * 27146 / 65536 + r1; - smlawt r2, r2, r10, r2 - smulwb r8, r8, r10 - smlawt r1, r1, r10, r1 - - // r0 = r0 + r6; - // r2 = r2 - r6; - // r6 = r0 - r6 * 2; - add r0, r0, r6 - sub r2, r2, r6 - sub r6, r0, r6, lsl #1 - - // r5 = r5 * -2.61313 / 8 + r8 = r5 * -21407 / 65536 + r8; - // r8 = r7 * -1.08239 / 8 + r8 = r7 * -8867 / 65536 + r8; - smlawt r5, r5, r11, r8 - smlawb r8, r7, r11, r8 - - // r4 = r4 + r2; - // r0 = r0 + r3; - // r2 = r4 - r2 * 2; - add r4, r4, r2 - add r0, r0, r3 - sub r2, r4, r2, lsl #1 - - // r7 = r5 * 8 - r3 = -(r3 - r5 * 8); - // r3 = r0 - r3 * 2; - // r1 = r1 - r7; - // r4 = r4 + r7; - // r5 = r8 * 8 - r1 = -(r1 - r8 * 8); - // r7 = r4 - r7 * 2; - rsb r7, r3, r5, lsl #3 - sub r3, r0, r3, lsl #1 - sub r1, r1, r7 - add r4, r4, r7 - rsb r5, r1, r8, lsl #3 - sub r7, r4, r7, lsl #1 - - // r2 = r2 + r1; - // r6 = r6 + r5; - // r1 = r2 - r1 * 2; - // r5 = r6 - r5 * 2; - add r2, r2, r1 - add r6, r6, r5 - sub r1, r2, r1, lsl #1 - sub r5, r6, r5, lsl #1 - - // Step 3: Reorder and Save. - - str r0, [sp, #-4] ! - str r4, [sp, #32] - str r2, [sp, #64] - str r6, [sp, #96] - str r5, [sp, #128] - str r1, [sp, #160] - str r7, [sp, #192] - str r3, [sp, #224] - b pass1_tail - - // Precomputed 16-bit constants: 27146, 15137, -21407, -8867. - // Put them in the middle since LDRD only accepts offsets from -255 to 255. - .align 3 -constants: - .word 0x6a0a3b21 - .word 0xac61dd5d - -pass1_zero: - str r4, [sp, #-4] ! - str r4, [sp, #32] - str r4, [sp, #64] - str r4, [sp, #96] - str r4, [sp, #128] - str r4, [sp, #160] - str r4, [sp, #192] - str r4, [sp, #224] - sub r12, r12, #16 - -pass1_tail: - ands r9, sp, #31 - bne pass1_head - - // r12 = rows, r14 = col. - ldr r12, [sp, #256] - ldr r14, [sp, #260] - - // Load constants. - ldrd r10, constants - -pass2_head: - // Load coefficients. (c[0, 1, 2, 3, 4, 5, 6, 7]) - ldmia sp!, {r0, r1, r2, r3, r4, r5, r6, r7} - - // r0 = r0 + 0x00808000; - add r0, r0, #0x00800000 - add r0, r0, #0x00008000 - - // Step 1: Analog to the first pass. - - // r0 = r0 + r4; - // r6 = r6 + r2; - add r0, r0, r4 - add r6, r6, r2 - - // r4 = r0 - r4 * 2; - // r2 = r2 * 2 - r6 = -(r6 - r2 * 2); - sub r4, r0, r4, lsl #1 - rsb r2, r6, r2, lsl #1 - - // r1 = r1 + r7; - // r3 = r3 + r5; - add r1, r1, r7 - add r3, r3, r5 - - // Step 2: Rotations and Butterflies. - - // r7 = r1 - r7 * 2; - // r1 = r1 - r3; - // r5 = r5 * 2 - r3 = -(r3 - r5 * 2); - // r3 = r1 + r3 * 2; - // r8 = r5 + r7; - sub r7, r1, r7, lsl #1 - sub r1, r1, r3 - rsb r5, r3, r5, lsl #1 - add r3, r1, r3, lsl #1 - add r8, r5, r7 - - // r2 = r2 * 1.41421 = r2 * 27146 / 65536 + r2; - // r8 = r8 * 1.84776 / 8 = r8 * 15137 / 65536; - // r1 = r1 * 1.41421 = r1 * 27146 / 65536 + r1; - smlawt r2, r2, r10, r2 - smulwb r8, r8, r10 - smlawt r1, r1, r10, r1 - - // r0 = r0 + r6; - // r2 = r2 - r6; - // r6 = r0 - r6 * 2; - add r0, r0, r6 - sub r2, r2, r6 - sub r6, r0, r6, lsl #1 - - // r5 = r5 * -2.61313 / 8 + r8 = r5 * -21407 / 65536 + r8; - // r8 = r7 * -1.08239 / 8 + r8 = r7 * -8867 / 65536 + r8; - smlawt r5, r5, r11, r8 - smlawb r8, r7, r11, r8 - - // r4 = r4 + r2; - // r0 = r0 + r3; - // r2 = r4 - r2 * 2; - add r4, r4, r2 - add r0, r0, r3 - sub r2, r4, r2, lsl #1 - - // r7 = r5 * 8 - r3 = -(r3 - r5 * 8); - // r3 = r0 - r3 * 2; - // r1 = r1 - r7; - // r4 = r4 + r7; - // r5 = r8 * 8 - r1 = -(r1 - r8 * 8); - // r7 = r4 - r7 * 2; - rsb r7, r3, r5, lsl #3 - sub r3, r0, r3, lsl #1 - sub r1, r1, r7 - add r4, r4, r7 - rsb r5, r1, r8, lsl #3 - sub r7, r4, r7, lsl #1 - - // r2 = r2 + r1; - // r6 = r6 + r5; - // r1 = r2 - r1 * 2; - // r5 = r6 - r5 * 2; - add r2, r2, r1 - add r6, r6, r5 - sub r1, r2, r1, lsl #1 - sub r5, r6, r5, lsl #1 - - // Step 3: Reorder and Save. - - // Load output pointer. - ldr r8, [r12], #4 - - // For little endian: r6, r2, r4, r0, r3, r7, r1, r5. - pkhtb r6, r6, r4, asr #16 - pkhtb r2, r2, r0, asr #16 - pkhtb r3, r3, r1, asr #16 - pkhtb r7, r7, r5, asr #16 - usat16 r6, #8, r6 - usat16 r2, #8, r2 - usat16 r3, #8, r3 - usat16 r7, #8, r7 - orr r0, r2, r6, lsl #8 - orr r1, r7, r3, lsl #8 - -#ifdef __ARMEB__ - // Reverse bytes for big endian. - rev r0, r0 - rev r1, r1 -#endif - - // Use STR instead of STRD to support unaligned access. - str r0, [r8, r14] ! - str r1, [r8, #4] - -pass2_tail: - adds r9, r9, #0x10000000 - bpl pass2_head - - ldr sp, [sp, #8] - add sp, sp, #236 - - ldmia sp!, {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14} - bx lr - .endfunc - -#endif diff --git a/libjpegtwrp/asm/armv7/jdcolor-android-armv7.S b/libjpegtwrp/asm/armv7/jdcolor-android-armv7.S deleted file mode 100644 index 95bd4bf78..000000000 --- a/libjpegtwrp/asm/armv7/jdcolor-android-armv7.S +++ /dev/null @@ -1,1223 +0,0 @@ -/*------------------------------------------------------------------------ -* jdcolor-android-armv7.S -* -* Copyright (c) 2010, Code Aurora Forum. All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are -* met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above -* copyright notice, this list of conditions and the following -* disclaimer in the documentation and/or other materials provided -* with the distribution. -* * Neither the name of Code Aurora Forum, Inc. nor the names of its -* contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*-------------------------------------------------------------------------- - -*-------------------------------------------------------------------------- -* FUNCTION LIST -*-------------------------------------------------------------------------- -* -* - yvup2rgb565_venum -* - yyvup2rgb565_venum -* - yvup2abgr8888_venum -* - yyvup2abgr8888_venum -* -*-------------------------------------------------------------------------- -*/ - - .section yvu_plain_to_rgb_android, "x" @ AREA - .text @ |.text|, CODE, READONLY - .align 2 - .code 32 @ CODE32 - -/*----------------------------------------------------------------------------- - * ARM Registers - * ---------------------------------------------------------------------------- */ -p_y .req r0 -p_cr .req r1 -p_cb .req r2 -p_rgb .req r3 -p_bgr .req r3 -length .req r12 - - .global yvup2rgb565_venum - .global yyvup2rgb565_venum - .global yvup2abgr8888_venum - .global yyvup2abgr8888_venum - -@ coefficients in color conversion matrix multiplication -.equ COEFF_Y, 256 @ contribution of Y -.equ COEFF_V_RED, 359 @ contribution of V for red -.equ COEFF_U_GREEN, -88 @ contribution of U for green -.equ COEFF_V_GREEN, -183 @ contribution of V for green -.equ COEFF_U_BLUE, 454 @ contribution of U for blue - -@ Clamping constants 0x0 and 0xFF -.equ COEFF_0, 0 -.equ COEFF_255, 255 - -@ Bias coefficients for red, green and blue -.equ COEFF_BIAS_R, -45824 @ Red bias = -359*128 + 128 -.equ COEFF_BIAS_G, 34816 @ Green bias = (88+183)*128 + 128 -.equ COEFF_BIAS_B, -57984 @ Blue bias = -454*128 + 128 - - -/*-------------------------------------------------------------------------- -* FUNCTION : yvup2rgb565_venum -*-------------------------------------------------------------------------- -* DESCRIPTION : Perform YVU planar to RGB565 conversion. -*-------------------------------------------------------------------------- -* C PROTOTYPE : void yvup2rgb565_venum(uint8_t *p_y, -* uint8_t *p_cr, -* uint8_t *p_cb, -* uint8_t *p_rgb565, -* uint32_t length) -*-------------------------------------------------------------------------- -* REG INPUT : R0: uint8_t *p_y -* pointer to the input Y Line -* R1: uint8_t *p_cr -* pointer to the input Cr Line -* R2: uint8_t *p_cb -* pointer to the input Cb Line -* R3: uint8_t *p_rgb565 -* pointer to the output RGB Line -* R12: uint32_t length -* width of Line -*-------------------------------------------------------------------------- -* STACK ARG : None -*-------------------------------------------------------------------------- -* REG OUTPUT : None -*-------------------------------------------------------------------------- -* MEM INPUT : p_y - a line of Y pixels -* p_cr - a line of Cr pixels -* p_cb - a line of Cb pixels -* length - the width of the input line -*-------------------------------------------------------------------------- -* MEM OUTPUT : p_rgb565 - the converted rgb pixels -*-------------------------------------------------------------------------- -* REG AFFECTED : ARM: R0-R4, R12 -* NEON: Q0-Q15 -*-------------------------------------------------------------------------- -* STACK USAGE : none -*-------------------------------------------------------------------------- -* CYCLES : none -* -*-------------------------------------------------------------------------- -* NOTES : -*-------------------------------------------------------------------------- -*/ -.type yvup2rgb565_venum, %function -yvup2rgb565_venum: - /*------------------------------------------------------------------------- - * Store stack registers - * ------------------------------------------------------------------------ */ - STMFD SP!, {LR} - - VPUSH {D8-D15} - - PLD [R0, R3] @ preload luma line - - ADR R12, constants - - VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0 - VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X - - /*------------------------------------------------------------------------- - * Load the 5th parameter via stack - * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above - * parameters are passed via stack - * ------------------------------------------------------------------------ */ - LDR R12, [SP, #68] @ LR is pushed into the stack so SP is - @ decreased by 4, - @ D8-D15 are also pushed into the stack - @ so SP is decreased by - @ 8-byte/D-Register * 8 D-Registers = 64, - @ so SP needs to be increased by 64+4=68 - @ to get the value that was first pushed - @ into stack (the 5th parameter passed in - @ throught stack) - - /*------------------------------------------------------------------------- - * Load clamping parameters to duplicate vector elements - * ------------------------------------------------------------------------ */ - VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 - VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - /*------------------------------------------------------------------------- - * Read bias - * ------------------------------------------------------------------------ */ - VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824 - VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816 - VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688 - - - /*------------------------------------------------------------------------- - * The main loop - * ------------------------------------------------------------------------ */ -loop_yvup2rgb565: - - /*------------------------------------------------------------------------- - * Load input from Y, V and U - * D12 : Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 - * D14 : V0 V1 V2 V3 V4 V5 V6 V7 - * D15 : U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VLD1.U8 {D12}, [p_y]! @ Load 8 Y elements (uint8) to D12 - VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14 - VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15 - - /*------------------------------------------------------------------------- - * Expand uint8 value to uint16 - * D18, D19: Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 - * D20, D21: V0 V1 V2 V3 V4 V5 V6 V7 - * D22, D23: U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VMOVL.U8 Q9, D12 - VMOVL.U8 Q10, D14 - VMOVL.U8 Q11, D15 - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q12, D20, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q13, D22, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q13, D20, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q14, D22, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q12, Q0 @ Q12 add Red bias -45824 - VADD.S32 Q13, Q1 @ Q13 add Green bias 34816 - VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMLAL.S16 Q12, D18, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format - VMLAL.S16 Q13, D18, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format - VMLAL.S16 Q14, D18, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D18 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format - VSHRN.S32 D20 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format - VSHRN.S32 D22, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format - - /*------------------------------------------------------------------------- - * Done with the first 4 elements, continue on the next 4 elements - * ------------------------------------------------------------------------ */ - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q12, D21, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q13, D23, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q13, D21, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q14, D23, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q12, Q0 @ Q12 add Red bias -45824 - VADD.S32 Q13, Q1 @ Q13 add Green bias 34816 - VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMLAL.S16 Q12, D19, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format - VMLAL.S16 Q13, D19, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format - VMLAL.S16 Q14, D19, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D19 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format - VSHRN.S32 D21 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format - VSHRN.S32 D23, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D28, Q9 @ store Red to D28, narrow the value from int16 to int8 - - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D27, Q10 @ store Green to D27, narrow the value from int16 to int8 - - VMAX.S16 Q11, Q11, Q4 @ if Q11 < 0, Q11 = 0 - VMIN.S16 Q11, Q11, Q5 @ if Q11 > 255, Q11 = 255 - VQMOVUN.S16 D26, Q11 @ store Blue to D26, narrow the value from int16 to int8. - - /*------------------------------------------------------------------------- - * D27: 3 bits of Green + 5 bits of Blue - * D28: 5 bits of Red + 3 bits of Green - * ------------------------------------------------------------------------ */ - VSRI.8 D28, D27, #5 @ right shift G by 5 and insert to R - VSHL.U8 D27, D27, #3 @ left shift G by 3 - VSRI.8 D27, D26, #3 @ right shift B by 3 and insert to G - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yvup2rgb565 @ jump to trailing processing if remaining length is less than 8 - - VST2.U8 {D27, D28}, [p_rgb]! @ vector store Red, Green, Blue to destination - @ Blue at LSB - - BHI loop_yvup2rgb565 @ loop if more than 8 pixels left - - BEQ end_yvup2rgb565 @ done if exactly 8 pixel processed in the loop - - -trailing_yvup2rgb565: - /*------------------------------------------------------------------------- - * There are from 1 ~ 7 pixels left in the trailing part. - * First adding 7 to the length so the length would be from 0 ~ 6. - * eg: 1 pixel left in the trailing part, so 1-8+7 = 0. - * Then save 1 pixel unconditionally since at least 1 pixels left in the - * trailing part. - * ------------------------------------------------------------------------ */ - ADDS length, length, #7 @ there are 7 or less in the trailing part - - VST2.U8 {D27[0], D28[0]}, [p_rgb]! @ at least 1 pixel left in the trailing part - BEQ end_yvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D27[1], D28[1]}, [p_rgb]! @ store one more pixel - BEQ end_yvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D27[2], D28[2]}, [p_rgb]! @ store one more pixel - BEQ end_yvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D27[3], D28[3]}, [p_rgb]! @ store one more pixel - BEQ end_yvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D27[4], D28[4]}, [p_rgb]! @ store one more pixel - BEQ end_yvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D27[5], D28[5]}, [p_rgb]! @ store one more pixel - BEQ end_yvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D27[6], D28[6]}, [p_rgb]! @ store one more pixel - -end_yvup2rgb565: - VPOP {D8-D15} - LDMFD SP!, {PC} - - @ end of yvup2rgb565 - - -/*-------------------------------------------------------------------------- -* FUNCTION : yyvup2rgb565_venum -*-------------------------------------------------------------------------- -* DESCRIPTION : Perform YYVU planar to RGB565 conversion. -*-------------------------------------------------------------------------- -* C PROTOTYPE : void yyvup2rgb565_venum(uint8_t *p_y, -* uint8_t *p_cr, -* uint8_t *p_cb, -* uint8_t *p_rgb565, -* uint32_t length) -*-------------------------------------------------------------------------- -* REG INPUT : R0: uint8_t *p_y -* pointer to the input Y Line -* R1: uint8_t *p_cr -* pointer to the input Cr Line -* R2: uint8_t *p_cb -* pointer to the input Cb Line -* R3: uint8_t *p_rgb565 -* pointer to the output RGB Line -* R12: uint32_t length -* width of Line -*-------------------------------------------------------------------------- -* STACK ARG : None -*-------------------------------------------------------------------------- -* REG OUTPUT : None -*-------------------------------------------------------------------------- -* MEM INPUT : p_y - a line of Y pixels -* p_cr - a line of Cr pixels -* p_cb - a line of Cb pixels -* length - the width of the input line -*-------------------------------------------------------------------------- -* MEM OUTPUT : p_rgb565 - the converted rgb pixels -*-------------------------------------------------------------------------- -* REG AFFECTED : ARM: R0-R4, R12 -* NEON: Q0-Q15 -*-------------------------------------------------------------------------- -* STACK USAGE : none -*-------------------------------------------------------------------------- -* CYCLES : none -* -*-------------------------------------------------------------------------- -* NOTES : -*-------------------------------------------------------------------------- -*/ -.type yyvup2rgb565_venum, %function -yyvup2rgb565_venum: - /*------------------------------------------------------------------------- - * Store stack registers - * ------------------------------------------------------------------------ */ - STMFD SP!, {LR} - - VPUSH {D8-D15} - - PLD [R0, R3] @ preload luma line - - ADR R12, constants - - VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0 - VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X - - /*------------------------------------------------------------------------- - * Load the 5th parameter via stack - * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above - * parameters are passed via stack - * ------------------------------------------------------------------------ */ - LDR R12, [SP, #68] @ LR is pushed into the stack so SP is - @ decreased by 4, - @ D8-D15 are also pushed into the stack - @ so SP is decreased by - @ 8-byte/D-Register * 8 D-Registers = 64, - @ so SP needs to be increased by 64+4=68 - @ to get the value that was first pushed - @ into stack (the 5th parameter passed in - @ throught stack) - - /*------------------------------------------------------------------------- - * Load clamping parameters to duplicate vector elements - * ------------------------------------------------------------------------ */ - VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 - VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - /*------------------------------------------------------------------------- - * Read bias - * ------------------------------------------------------------------------ */ - VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824 - VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816 - VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688 - - - /*------------------------------------------------------------------------- - * The main loop - * ------------------------------------------------------------------------ */ -loop_yyvup2rgb565: - - /*------------------------------------------------------------------------- - * Load input from Y, V and U - * D12, D13: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14, Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15 - * D14 : V0 V1 V2 V3 V4 V5 V6 V7 - * D15 : U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VLD2.U8 {D12,D13}, [p_y]! @ Load 16 Luma elements (uint8) to D12, D13 - VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14 - VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15 - - /*------------------------------------------------------------------------- - * Expand uint8 value to uint16 - * D24, D25: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14 - * D26, D27: Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15 - * D28, D29: V0 V1 V2 V3 V4 V5 V6 V7 - * D30, D31: U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VMOVL.U8 Q12, D12 - VMOVL.U8 Q13, D13 - VMOVL.U8 Q14, D14 - VMOVL.U8 Q15, D15 - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q6, D28, D6[0] @ Q6: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q7, D30, D6[1] @ Q7: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q7, D28, D6[2] @ q7: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q8, D30, D6[3] @ q8: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q6, Q0 @ Q6 add Red bias -45824 - VADD.S32 Q7, Q1 @ Q7 add Green bias 34816 - VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMOV.S32 Q9, Q6 - VMLAL.S16 Q6, D24, D7[0] @ Q6: R0, R2, R4, R6 in 32-bit Q8 format - VMLAL.S16 Q9, D26, D7[0] @ Q9: R1, R3, R5, R7 in 32-bit Q8 format - - VMOV.S32 Q10, Q7 - VMLAL.S16 Q7, D24, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format - VMLAL.S16 Q10, D26, D7[0] @ Q10: G1, G3, G5, G7 in 32-bit Q8 format - - VMOV.S32 Q11, Q8 - VMLAL.S16 Q8, D24, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format - VMLAL.S16 Q11, D26, D7[0] @ Q11: B1, B3, B5, B7 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D12, Q6, #8 @ D12: R0 R2 R4 R6 in 16-bit Q0 format - VSHRN.S32 D13, Q9, #8 @ D13: R1 R3 R5 R7 in 16-bit Q0 format - VZIP.16 D12, D13 @ Q6 : R0 R1 R2 R3 R4 R5 R6 R7 - - VSHRN.S32 D18, Q7, #8 @ D18: G0 G2 G4 G6 in 16-bit Q0 format - VSHRN.S32 D19, Q10, #8 @ D19: G1 G3 G5 G7 in 16-bit Q0 format - VZIP.16 D18, D19 @ Q9 : G0 G1 G2 G3 G4 G5 G6 G7 - - VSHRN.S32 D20, Q8, #8 @ D20: B0 B2 B4 B6 in 16-bit Q0 format - VSHRN.S32 D21, Q11, #8 @ D21: B1 B3 B5 B7 in 16-bit Q0 format - VZIP.16 D20, D21 @ Q10: B0 B1 B2 B3 B4 B5 B6 B7 - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0 - VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255 - VQMOVUN.S16 D23, Q6 @ store Red to D23, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8 - - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D21, Q10 @ store Blue to D21, narrow the value from int16 to int8 - - /*------------------------------------------------------------------------- - * D22: 3 bits of Green + 5 bits of Blue - * D23: 5 bits of Red + 3 bits of Green - * ------------------------------------------------------------------------ */ - VSRI.8 D23, D22, #5 @ right shift G by 5 and insert to R - VSHL.U8 D22, D22, #3 @ left shift G by 3 - VSRI.8 D22, D21, #3 @ right shift B by 3 and insert to G - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yyvup2rgb565 @ jump to trailing processing if remaining length is less than 8 - - VST2.U8 {D22,D23}, [p_rgb]! @ vector store Red, Green, Blue to destination - @ Blue at LSB - - BEQ end_yyvup2rgb565 @ done if exactly 8 pixel processed in the loop - - - /*------------------------------------------------------------------------- - * Done with the first 8 elements, continue on the next 8 elements - * ------------------------------------------------------------------------ */ - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q6, D29, D6[0] @ Q6: 359*(V4,V5,V6,V7) Red - VMULL.S16 Q7, D31, D6[1] @ Q7: -88*(U4,U5,U6,U7) Green - VMLAL.S16 Q7, D29, D6[2] @ Q7: -88*(U4,U5,U6,U7) - 183*(V4,V5,V6,V7) - VMULL.S16 Q8, D31, D6[3] @ Q8: 454*(U4,U5,U6,U7) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q6, Q0 @ Q6 add Red bias -45824 - VADD.S32 Q7, Q1 @ Q7 add Green bias 34816 - VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMOV.S32 Q9, Q6 - VMLAL.S16 Q6, D25, D7[0] @ Q6: R8 R10 R12 R14 in 32-bit Q8 format - VMLAL.S16 Q9, D27, D7[0] @ Q9: R9 R11 R13 R15 in 32-bit Q8 format - - VMOV.S32 Q10, Q7 - VMLAL.S16 Q7, D25, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format - VMLAL.S16 Q10, D27, D7[0] @ Q10 : G1, G3, G5, G7 in 32-bit Q8 format - - VMOV.S32 Q11, Q8 - VMLAL.S16 Q8, D25, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format - VMLAL.S16 Q11, D27, D7[0] @ Q11 : B1, B3, B5, B7 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D12, Q6, #8 @ D12: R8 R10 R12 R14 in 16-bit Q0 format - VSHRN.S32 D13, Q9, #8 @ D13: R9 R11 R13 R15 in 16-bit Q0 format - VZIP.16 D12, D13 @ Q6: R8 R9 R10 R11 R12 R13 R14 R15 - - VSHRN.S32 D18, Q7, #8 @ D18: G8 G10 G12 G14 in 16-bit Q0 format - VSHRN.S32 D19, Q10, #8 @ D19: G9 G11 G13 G15 in 16-bit Q0 format - VZIP.16 D18, D19 @ Q9: G8 G9 G10 G11 G12 G13 G14 G15 - - VSHRN.S32 D20, Q8, #8 @ D20: B8 B10 B12 B14 in 16-bit Q0 format - VSHRN.S32 D21, Q11, #8 @ D21: B9 B11 B13 B15 in 16-bit Q0 format - VZIP.16 D20, D21 @ Q10: B8 B9 B10 B11 B12 B13 B14 B15 - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0 - VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255 - VQMOVUN.S16 D23, Q6 @ store Red to D23, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8 - - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D21, Q10 @ store Blue to D21, narrow the value from int16 to int8 - - /*------------------------------------------------------------------------- - * D22: 3 bits of Green + 5 bits of Blue - * D23: 5 bits of Red + 3 bits of Green - * ------------------------------------------------------------------------ */ - VSRI.8 D23, D22, #5 @ right shift G by 5 and insert to R - VSHL.U8 D22, D22, #3 @ left shift G by 3 - VSRI.8 D22, D21, #3 @ right shift B by 3 and insert to G - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yyvup2rgb565 @ jump to trailing processing if remaining length is less than 8 - - VST2.U8 {D22,D23}, [p_rgb]! @ vector store Red, Green, Blue to destination - @ Blue at LSB - - BHI loop_yyvup2rgb565 @ loop if more than 8 pixels left - - BEQ end_yyvup2rgb565 @ done if exactly 8 pixel processed in the loop - - -trailing_yyvup2rgb565: - /*------------------------------------------------------------------------- - * There are from 1 ~ 7 pixels left in the trailing part. - * First adding 7 to the length so the length would be from 0 ~ 6. - * eg: 1 pixel left in the trailing part, so 1-8+7 = 0. - * Then save 1 pixel unconditionally since at least 1 pixels left in the - * trailing part. - * ------------------------------------------------------------------------ */ - ADDS length, length, #7 @ there are 7 or less in the trailing part - - VST2.U8 {D22[0],D23[0]}, [p_rgb]! @ at least 1 pixel left in the trailing part - BEQ end_yyvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D22[1],D23[1]}, [p_rgb]! @ store one more pixel - BEQ end_yyvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D22[2],D23[2]}, [p_rgb]! @ store one more pixel - BEQ end_yyvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D22[3],D23[3]}, [p_rgb]! @ store one more pixel - BEQ end_yyvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D22[4],D23[4]}, [p_rgb]! @ store one more pixel - BEQ end_yyvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D22[5],D23[5]}, [p_rgb]! @ store one more pixel - BEQ end_yyvup2rgb565 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST2.U8 {D22[6],D23[6]}, [p_rgb]! @ store one more pixel - -end_yyvup2rgb565: - VPOP {D8-D15} - LDMFD SP!, {PC} - - @ end of yyvup2rgb565 - -constants: - .hword (COEFF_V_RED), (COEFF_U_GREEN), (COEFF_V_GREEN), (COEFF_U_BLUE) @ 359 | -88 | -183 | 454 - .hword (COEFF_Y), (COEFF_0), (COEFF_255) , (COEFF_0) @ 256 | 0 | 255 | 0 - .word (COEFF_BIAS_R), (COEFF_BIAS_G), (COEFF_BIAS_B) @ -45824 | 34816 | -57984 | X - -/*-------------------------------------------------------------------------- -* FUNCTION : yvup2abgr8888_venum -*-------------------------------------------------------------------------- -* DESCRIPTION : Perform YVU planar to ABGR8888 conversion. -*-------------------------------------------------------------------------- -* C PROTOTYPE : void yvup2abgr8888_venum(uint8_t *p_y, -* uint8_t *p_cr, -* uint8_t *p_cb, -* uint8_t *p_abgr8888, -* uint32_t length) -*-------------------------------------------------------------------------- -* REG INPUT : R0: uint8_t *p_y -* pointer to the input Y Line -* R1: uint8_t *p_cr -* pointer to the input Cr Line -* R2: uint8_t *p_cb -* pointer to the input Cb Line -* R3: uint8_t *p_abgr8888 -* pointer to the output ABGR Line -* R12: uint32_t length -* width of Line -*-------------------------------------------------------------------------- -* STACK ARG : None -*-------------------------------------------------------------------------- -* REG OUTPUT : None -*-------------------------------------------------------------------------- -* MEM INPUT : p_y - a line of Y pixels -* p_cr - a line of Cr pixels -* p_cb - a line of Cb pixels -* length - the width of the input line -*-------------------------------------------------------------------------- -* MEM OUTPUT : p_abgr8888 - the converted ABGR pixels -*-------------------------------------------------------------------------- -* REG AFFECTED : ARM: R0-R4, R12 -* NEON: Q0-Q15 -*-------------------------------------------------------------------------- -* STACK USAGE : none -*-------------------------------------------------------------------------- -* CYCLES : none -* -*-------------------------------------------------------------------------- -* NOTES : -*-------------------------------------------------------------------------- -*/ -.type yvup2abgr8888_venum, %function -yvup2abgr8888_venum: - /*------------------------------------------------------------------------- - * Store stack registers - * ------------------------------------------------------------------------ */ - STMFD SP!, {LR} - - VPUSH {D8-D15} - - PLD [R0, R3] @ preload luma line - - ADR R12, constants - - VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0 - VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X - - /*------------------------------------------------------------------------- - * Load the 5th parameter via stack - * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above - * parameters are passed via stack - * ------------------------------------------------------------------------ */ - LDR R12, [SP, #68] @ LR is pushed into the stack so SP is - @ decreased by 4, - @ D8-D15 are also pushed into the stack - @ so SP is decreased by - @ 8-byte/D-Register * 8 D-Registers = 64, - @ so SP needs to be increased by 64+4=68 - @ to get the value that was first pushed - @ into stack (the 5th parameter passed in - @ throught stack) - - /*------------------------------------------------------------------------- - * Load clamping parameters to duplicate vector elements - * ------------------------------------------------------------------------ */ - VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 - VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - /*------------------------------------------------------------------------- - * Read bias - * ------------------------------------------------------------------------ */ - VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824 - VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816 - VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688 - - - /*------------------------------------------------------------------------- - * The main loop - * ------------------------------------------------------------------------ */ -loop_yvup2abgr: - - /*------------------------------------------------------------------------- - * Load input from Y, V and U - * D12 : Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 - * D14 : V0 V1 V2 V3 V4 V5 V6 V7 - * D15 : U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VLD1.U8 {D12}, [p_y]! @ Load 8 Luma elements (uint8) to D12 - VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14 - VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15 - - /*------------------------------------------------------------------------- - * Expand uint8 value to uint16 - * D18, D19: Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 - * D20, D21: V0 V1 V2 V3 V4 V5 V6 V7 - * D22, D23: U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VMOVL.U8 Q9, D12 - VMOVL.U8 Q10, D14 - VMOVL.U8 Q11, D15 - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q12, D20, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q13, D22, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q13, D20, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q14, D22, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q12, Q0 @ Q12 add Red bias -45824 - VADD.S32 Q13, Q1 @ Q13 add Green bias 34816 - VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMLAL.S16 Q12, D18, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format - VMLAL.S16 Q13, D18, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format - VMLAL.S16 Q14, D18, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D18 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format - VSHRN.S32 D20 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format - VSHRN.S32 D22, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format - - /*------------------------------------------------------------------------- - * Done with the first 4 elements, continue on the next 4 elements - * ------------------------------------------------------------------------ */ - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q12, D21, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q13, D23, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q13, D21, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q14, D23, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q12, Q0 @ Q12 add Red bias -45824 - VADD.S32 Q13, Q1 @ Q13 add Green bias 34816 - VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMLAL.S16 Q12, D19, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format - VMLAL.S16 Q13, D19, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format - VMLAL.S16 Q14, D19, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D19 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format - VSHRN.S32 D21 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format - VSHRN.S32 D23, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q11, Q11, Q4 @ if Q11 < 0, Q11 = 0 - VMIN.S16 Q11, Q11, Q5 @ if Q11 > 255, Q11 = 255 - VQMOVUN.S16 D28, Q11 @ store Blue to D28, narrow the value from int16 to int8 - - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D27, Q10 @ store Green to D27, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D26, Q9 @ store Red to D26, narrow the value from int16 to int8 - - /*------------------------------------------------------------------------- - * abgr format with leading 0xFF byte - * ------------------------------------------------------------------------ */ - VMOVN.I16 D29, Q5 @ D29: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yvup2abgr @ jump to trailing processing if remaining length is less than 8 - - VST4.U8 {D26,D27,D28,D29}, [p_bgr]! @ vector store Red, Green, Blue to destination - @ Blue at LSB - - BHI loop_yvup2abgr @ loop if more than 8 pixels left - - BEQ end_yvup2abgr @ done if exactly 8 pixel processed in the loop - - -trailing_yvup2abgr: - /*------------------------------------------------------------------------- - * There are from 1 ~ 7 pixels left in the trailing part. - * First adding 7 to the length so the length would be from 0 ~ 6. - * eg: 1 pixel left in the trailing part, so 1-8+7 = 0. - * Then save 1 pixel unconditionally since at least 1 pixels left in the - * trailing part. - * ------------------------------------------------------------------------ */ - ADDS length, length, #7 @ there are 7 or less in the trailing part - - VST4.U8 {D26[0], D27[0], D28[0], D29[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part - BEQ end_yvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D26[1], D27[1], D28[1], D29[1]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D26[2], D27[2], D28[2], D29[2]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D26[3], D27[3], D28[3], D29[3]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D26[4], D27[4], D28[4], D29[4]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D26[5], D27[5], D28[5], D29[5]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D26[6], D27[6], D28[6], D29[6]}, [p_bgr]! @ store one more pixel - -end_yvup2abgr: - VPOP {D8-D15} - LDMFD SP!, {PC} - @ end of yvup2abgr - -/*-------------------------------------------------------------------------- -* FUNCTION : yyvup2abgr8888_venum -*-------------------------------------------------------------------------- -* DESCRIPTION : Perform YYVU planar to ABGR8888 conversion. -*-------------------------------------------------------------------------- -* C PROTOTYPE : void yyvup2abgr8888_venum(uint8_t *p_y, -* uint8_t *p_cr, -* uint8_t *p_cb, -* uint8_t *p_abgr8888, -* uint32_t length) -*-------------------------------------------------------------------------- -* REG INPUT : R0: uint8_t *p_y -* pointer to the input Y Line -* R1: uint8_t *p_cr -* pointer to the input Cr Line -* R2: uint8_t *p_cb -* pointer to the input Cb Line -* R3: uint8_t *p_abgr8888 -* pointer to the output ABGR Line -* R12: uint32_t length -* width of Line -*-------------------------------------------------------------------------- -* STACK ARG : None -*-------------------------------------------------------------------------- -* REG OUTPUT : None -*-------------------------------------------------------------------------- -* MEM INPUT : p_y - a line of Y pixels -* p_cr - a line of Cr pixels -* p_cb - a line of Cb pixels -* length - the width of the input line -*-------------------------------------------------------------------------- -* MEM OUTPUT : p_abgr8888 - the converted ABGR pixels -*-------------------------------------------------------------------------- -* REG AFFECTED : ARM: R0-R4, R12 -* NEON: Q0-Q15 -*-------------------------------------------------------------------------- -* STACK USAGE : none -*-------------------------------------------------------------------------- -* CYCLES : none -* -*-------------------------------------------------------------------------- -* NOTES : -*-------------------------------------------------------------------------- -*/ -.type yyvup2abgr8888_venum, %function -yyvup2abgr8888_venum: - /*------------------------------------------------------------------------- - * Store stack registers - * ------------------------------------------------------------------------ */ - STMFD SP!, {LR} - - VPUSH {D8-D15} - - PLD [R0, R3] @ preload luma line - - ADR R12, constants - - VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0 - VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X - - /*------------------------------------------------------------------------- - * Load the 5th parameter via stack - * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above - * parameters are passed via stack - * ------------------------------------------------------------------------ */ - LDR R12, [SP, #68] @ LR is pushed into the stack so SP is - @ decreased by 4, - @ D8-D15 are also pushed into the stack - @ so SP is decreased by - @ 8-byte/D-Register * 8 D-Registers = 64, - @ so SP needs to be increased by 64+4=68 - @ to get the value that was first pushed - @ into stack (the 5th parameter passed in - @ throught stack) - - /*------------------------------------------------------------------------- - * Load clamping parameters to duplicate vector elements - * ------------------------------------------------------------------------ */ - VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 - VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - /*------------------------------------------------------------------------- - * Read bias - * ------------------------------------------------------------------------ */ - VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824 - VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816 - VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688 - - - /*------------------------------------------------------------------------- - * The main loop - * ------------------------------------------------------------------------ */ -loop_yyvup2abgr: - - /*------------------------------------------------------------------------- - * Load input from Y, V and U - * D12, D13: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14, Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15 - * D14 : V0 V1 V2 V3 V4 V5 V6 V7 - * D15 : U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VLD2.U8 {D12,D13}, [p_y]! @ Load 16 Luma elements (uint8) to D12, D13 - VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14 - VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15 - - /*------------------------------------------------------------------------- - * Expand uint8 value to uint16 - * D24, D25: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14 - * D26, D27: Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15 - * D28, D29: V0 V1 V2 V3 V4 V5 V6 V7 - * D30, D31: U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VMOVL.U8 Q12, D12 - VMOVL.U8 Q13, D13 - VMOVL.U8 Q14, D14 - VMOVL.U8 Q15, D15 - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q6, D28, D6[0] @ Q6: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q7, D30, D6[1] @ Q7: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q7, D28, D6[2] @ Q7: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q8, D30, D6[3] @ Q8: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q6, Q0 @ Q6 add Red bias -45824 - VADD.S32 Q7, Q1 @ Q7 add Green bias 34816 - VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMOV.S32 Q9, Q6 - VMLAL.S16 Q6, D24, D7[0] @ Q6: R0, R2, R4, R6 in 32-bit Q8 format - VMLAL.S16 Q9, D26, D7[0] @ Q9: R1, R3, R5, R7 in 32-bit Q8 format - - VMOV.S32 Q10, Q7 - VMLAL.S16 Q7, D24, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format - VMLAL.S16 Q10, D26, D7[0] @ Q10: G1, G3, G5, G7 in 32-bit Q8 format - - VMOV.S32 Q11, Q8 - VMLAL.S16 Q8, D24, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format - VMLAL.S16 Q11, D26, D7[0] @ Q11: B1, B3, B5, B7 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D12, Q6, #8 @ D12: R0 R2 R4 R6 in 16-bit Q0 format - VSHRN.S32 D13, Q9, #8 @ D13: R1 R3 R5 R7 in 16-bit Q0 format - VZIP.16 D12, D13 @ Q6 : R0 R1 R2 R3 R4 R5 R6 R7 - - VSHRN.S32 D18, Q7, #8 @ D18: G0 G2 G4 G6 in 16-bit Q0 format - VSHRN.S32 D19, Q10, #8 @ D19: G1 G3 G5 G7 in 16-bit Q0 format - VZIP.16 D18, D19 @ Q9 : G0 G1 G2 G3 G4 G5 G6 G7 - - VSHRN.S32 D20, Q8, #8 @ D20: B0 B2 B4 B6 in 16-bit Q0 format - VSHRN.S32 D21, Q11, #8 @ D21: B1 B3 B5 B7 in 16-bit Q0 format - VZIP.16 D20, D21 @ Q10: B0 B1 B2 B3 B4 B5 B6 B7 - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8 - - VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0 - VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255 - VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8 - - /*------------------------------------------------------------------------- - * abgr format with leading 0xFF byte - * ------------------------------------------------------------------------ */ - VMOVN.I16 D24, Q5 @ D24: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yyvup2abgr @ jump to trailing processing if remaining length is less than 8 - - VST4.U8 {D21,D22,D23,D24}, [p_bgr]! @ vector store Blue, Green, Red to destination - @ Red at LSB - - BEQ end_yyvup2abgr @ done if exactly 8 pixel processed in the loop - - - /*------------------------------------------------------------------------- - * Done with the first 8 elements, continue on the next 8 elements - * ------------------------------------------------------------------------ */ - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q6, D29, D6[0] @ Q6: 359*(V4,V5,V6,V7) Red - VMULL.S16 Q7, D31, D6[1] @ Q7: -88*(U4,U5,U6,U7) Green - VMLAL.S16 Q7, D29, D6[2] @ Q7: -88*(U4,U5,U6,U7) - 183*(V4,V5,V6,V7) - VMULL.S16 Q8, D31, D6[3] @ Q8: 454*(U4,U5,U6,U7) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q6, Q0 @ Q6 add Red bias -45824 - VADD.S32 Q7, Q1 @ Q7 add Green bias 34816 - VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMOV.S32 Q9, Q6 - VMLAL.S16 Q6, D25, D7[0] @ Q6: R8 R10 R12 R14 in 32-bit Q8 format - VMLAL.S16 Q9, D27, D7[0] @ Q9: R9 R11 R13 R15 in 32-bit Q8 format - - VMOV.S32 Q10, Q7 - VMLAL.S16 Q7, D25, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format - VMLAL.S16 Q10, D27, D7[0] @ Q10 : G1, G3, G5, G7 in 32-bit Q8 format - - VMOV.S32 Q11, Q8 - VMLAL.S16 Q8, D25, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format - VMLAL.S16 Q11, D27, D7[0] @ Q11 : B1, B3, B5, B7 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D12, Q6, #8 @ D12: R8 R10 R12 R14 in 16-bit Q0 format - VSHRN.S32 D13, Q9, #8 @ D13: R9 R11 R13 R15 in 16-bit Q0 format - VZIP.16 D12, D13 @ Q6: R8 R9 R10 R11 R12 R13 R14 R15 - - VSHRN.S32 D18, Q7, #8 @ D18: G8 G10 G12 G14 in 16-bit Q0 format - VSHRN.S32 D19, Q10, #8 @ D19: G9 G11 G13 G15 in 16-bit Q0 format - VZIP.16 D18, D19 @ Q9: G8 G9 G10 G11 G12 G13 G14 G15 - - VSHRN.S32 D20, Q8, #8 @ D20: B8 B10 B12 B14 in 16-bit Q0 format - VSHRN.S32 D21, Q11, #8 @ D21: B9 B11 B13 B15 in 16-bit Q0 format - VZIP.16 D20, D21 @ Q10: B8 B9 B10 B11 B12 B13 B14 B15 - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8 - - VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0 - VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255 - VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8 - - /*------------------------------------------------------------------------- - * abgr format with leading 0xFF byte - * ------------------------------------------------------------------------ */ - VMOVN.I16 D24, Q5 @ D24: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yyvup2abgr @ jump to trailing processing if remaining length is less than 8 - - VST4.U8 {D21,D22,D23,D24}, [p_bgr]! @ vector store Blue, Green, Red to destination - @ Red at LSB - - BHI loop_yyvup2abgr @ loop if more than 8 pixels left - - BEQ end_yyvup2abgr @ done if exactly 8 pixel processed in the loop - - -trailing_yyvup2abgr: - /*------------------------------------------------------------------------- - * There are from 1 ~ 7 pixels left in the trailing part. - * First adding 7 to the length so the length would be from 0 ~ 6. - * eg: 1 pixel left in the trailing part, so 1-8+7 = 0. - * Then save 1 pixel unconditionally since at least 1 pixels left in the - * trailing part. - * ------------------------------------------------------------------------ */ - ADDS length, length, #7 @ there are 7 or less in the trailing part - - VST4.U8 {D21[0],D22[0],D23[0],D24[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part - BEQ end_yyvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D21[1],D22[1],D23[1],D24[1]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D21[2],D22[2],D23[2],D24[2]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D21[3],D22[3],D23[3],D24[3]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D21[4],D22[4],D23[4],D24[4]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D21[5],D22[5],D23[5],D24[5]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2abgr @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST4.U8 {D21[6],D22[6],D23[6],D24[6]}, [p_bgr]! @ store one more pixel - -end_yyvup2abgr: - VPOP {D8-D15} - LDMFD SP!, {PC} - @ end of yyvup2abgr - -.end - diff --git a/libjpegtwrp/asm/armv7/jdcolor-armv7.S b/libjpegtwrp/asm/armv7/jdcolor-armv7.S deleted file mode 100644 index b2da6d5d0..000000000 --- a/libjpegtwrp/asm/armv7/jdcolor-armv7.S +++ /dev/null @@ -1,632 +0,0 @@ -/*------------------------------------------------------------------------ -* jdcolor-armv7.S -* -* Copyright (c) 2010, Code Aurora Forum. All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are -* met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above -* copyright notice, this list of conditions and the following -* disclaimer in the documentation and/or other materials provided -* with the distribution. -* * Neither the name of Code Aurora Forum, Inc. nor the names of its -* contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*-------------------------------------------------------------------------- - -*-------------------------------------------------------------------------- -* FUNCTION LIST -*-------------------------------------------------------------------------- -* -* - yvup2bgr888_venum -* - yyvup2bgr888_venum -* -*-------------------------------------------------------------------------- -*/ - - .section yvu_plain_to_bgr, "x" @ AREA - .text @ |.text|, CODE, READONLY - .align 2 - .code 32 @ CODE32 - -/*----------------------------------------------------------------------------- - * ARM Registers - * ---------------------------------------------------------------------------- */ -p_y .req r0 -p_cr .req r1 -p_cb .req r2 -p_rgb .req r3 -p_bgr .req r3 -length .req r12 - - .global yvup2bgr888_venum - .global yyvup2bgr888_venum - -@ coefficients in color conversion matrix multiplication -.equ COEFF_Y, 256 @ contribution of Y -.equ COEFF_V_RED, 359 @ contribution of V for red -.equ COEFF_U_GREEN, -88 @ contribution of U for green -.equ COEFF_V_GREEN, -183 @ contribution of V for green -.equ COEFF_U_BLUE, 454 @ contribution of U for blue - -@ Clamping constants 0x0 and 0xFF -.equ COEFF_0, 0 -.equ COEFF_255, 255 - -@ Bias coefficients for red, green and blue -.equ COEFF_BIAS_R, -45824 @ Red bias = -359*128 + 128 -.equ COEFF_BIAS_G, 34816 @ Green bias = (88+183)*128 + 128 -.equ COEFF_BIAS_B, -57984 @ Blue bias = -454*128 + 128 - -constants: - .hword (COEFF_V_RED), (COEFF_U_GREEN), (COEFF_V_GREEN), (COEFF_U_BLUE) @ 359 | -88 | -183 | 454 - .hword (COEFF_Y), (COEFF_0), (COEFF_255) , (COEFF_0) @ 256 | 0 | 255 | 0 - .word (COEFF_BIAS_R), (COEFF_BIAS_G), (COEFF_BIAS_B) @ -45824 | 34816 | -57984 | X - -/*-------------------------------------------------------------------------- -* FUNCTION : yvup2bgr888_venum -*-------------------------------------------------------------------------- -* DESCRIPTION : Perform YVU planar to BGR888 conversion. -*-------------------------------------------------------------------------- -* C PROTOTYPE : void yvup2bgr888_venum(uint8_t *p_y, -* uint8_t *p_cr, -* uint8_t *p_cb, -* uint8_t *p_bgr888, -* uint32_t length) -*-------------------------------------------------------------------------- -* REG INPUT : R0: uint8_t *p_y -* pointer to the input Y Line -* R1: uint8_t *p_cr -* pointer to the input Cr Line -* R2: uint8_t *p_cb -* pointer to the input Cb Line -* R3: uint8_t *p_bgr888 -* pointer to the output BGR Line -* R12: uint32_t length -* width of Line -*-------------------------------------------------------------------------- -* STACK ARG : None -*-------------------------------------------------------------------------- -* REG OUTPUT : None -*-------------------------------------------------------------------------- -* MEM INPUT : p_y - a line of Y pixels -* p_cr - a line of Cr pixels -* p_cb - a line of Cb pixels -* length - the width of the input line -*-------------------------------------------------------------------------- -* MEM OUTPUT : p_bgr888 - the converted bgr pixels -*-------------------------------------------------------------------------- -* REG AFFECTED : ARM: R0-R4, R12 -* NEON: Q0-Q15 -*-------------------------------------------------------------------------- -* STACK USAGE : none -*-------------------------------------------------------------------------- -* CYCLES : none -* -*-------------------------------------------------------------------------- -* NOTES : -*-------------------------------------------------------------------------- -*/ -.type yvup2bgr888_venum, %function -yvup2bgr888_venum: - - /*------------------------------------------------------------------------- - * Store stack registers - * ------------------------------------------------------------------------ */ - STMFD SP!, {LR} - - VPUSH {D8-D15} - - PLD [R0, R3] @ preload luma line - - ADR R12, constants - - VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0 - VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X - - /*------------------------------------------------------------------------- - * Load the 5th parameter via stack - * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above - * parameters are passed via stack - * ------------------------------------------------------------------------ */ - LDR R12, [SP, #68] @ LR is pushed into the stack so SP is - @ decreased by 4, - @ D8-D15 are also pushed into the stack - @ so SP is decreased by - @ 8-byte/D-Register * 8 D-Registers = 64, - @ so SP needs to be increased by 64+4=68 - @ to get the value that was first pushed - @ into stack (the 5th parameter passed in - @ throught stack) - - /*------------------------------------------------------------------------- - * Load clamping parameters to duplicate vector elements - * ------------------------------------------------------------------------ */ - VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 - VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - /*------------------------------------------------------------------------- - * Read bias - * ------------------------------------------------------------------------ */ - VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824 - VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816 - VDUP.S32 Q2, D31[0] @ Q2: -57984 | -57984 | -57984 | -57984 - - - /*------------------------------------------------------------------------- - * The main loop - * ------------------------------------------------------------------------ */ -loop_yvup2bgr888: - - /*------------------------------------------------------------------------- - * Load input from Y, V and U - * D12 : Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 - * D14 : V0 V1 V2 V3 V4 V5 V6 V7 - * D15 : U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VLD1.U8 {D12}, [p_y]! @ Load 8 Luma elements (uint8) to D12 - VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14 - VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15 - - /*------------------------------------------------------------------------- - * Expand uint8 value to uint16 - * D18, D19: Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 - * D20, D21: V0 V1 V2 V3 V4 V5 V6 V7 - * D22, D23: U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VMOVL.U8 Q9, D12 - VMOVL.U8 Q10, D14 - VMOVL.U8 Q11, D15 - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q12, D20, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q13, D22, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q13, D20, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q14, D22, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q12, Q0 @ Q12 add Red bias -45824 - VADD.S32 Q13, Q1 @ Q13 add Green bias 34816 - VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMLAL.S16 Q12, D18, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format - VMLAL.S16 Q13, D18, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format - VMLAL.S16 Q14, D18, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D18 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format - VSHRN.S32 D20 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format - VSHRN.S32 D22, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format - - /*------------------------------------------------------------------------- - * Done with the first 4 elements, continue on the next 4 elements - * ------------------------------------------------------------------------ */ - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q12, D21, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q13, D23, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q13, D21, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q14, D23, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q12, Q0 @ Q12 add Red bias -45824 - VADD.S32 Q13, Q1 @ Q13 add Green bias 34816 - VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMLAL.S16 Q12, D19, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format - VMLAL.S16 Q13, D19, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format - VMLAL.S16 Q14, D19, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D19 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format - VSHRN.S32 D21 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format - VSHRN.S32 D23, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q11, Q11, Q4 @ if Q11 < 0, Q11 = 0 - VMIN.S16 Q11, Q11, Q5 @ if Q11 > 255, Q11 = 255 - VQMOVUN.S16 D28, Q11 @ store Blue to D28, narrow the value from int16 to int8 - - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D27, Q10 @ store Green to D27, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D26, Q9 @ store Red to D26, narrow the value from int16 to int8. - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yvup2bgr888 @ jump to trailing processing if remaining length is less than 8 - - VST3.U8 {D26,D27,D28}, [p_bgr]! @ vector store Red, Green, Blue to destination - @ Blue at LSB - - BHI loop_yvup2bgr888 @ loop if more than 8 pixels left - - BEQ end_yvup2bgr888 @ done if exactly 8 pixel processed in the loop - - -trailing_yvup2bgr888: - /*------------------------------------------------------------------------- - * There are from 1 ~ 7 pixels left in the trailing part. - * First adding 7 to the length so the length would be from 0 ~ 6. - * eg: 1 pixel left in the trailing part, so 1-8+7 = 0. - * Then save 1 pixel unconditionally since at least 1 pixels left in the - * trailing part. - * ------------------------------------------------------------------------ */ - ADDS length, length, #7 @ there are 7 or less in the trailing part - - VST3.U8 {D26[0], D27[0], D28[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part - BEQ end_yvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D26[1], D27[1], D28[1]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D26[2], D27[2], D28[2]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D26[3], D27[3], D28[3]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D26[4], D27[4], D28[4]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D26[5], D27[5], D28[5]}, [p_bgr]! @ store one more pixel - BEQ end_yvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D26[6], D27[6], D28[6]}, [p_bgr]! @ store one more pixel - -end_yvup2bgr888: - VPOP {D8-D15} - LDMFD SP!, {PC} - - @ end of yvup2bgr888 - - -/*------------------------------------------------------------------------- -* FUNCTION : yyvup2bgr888_venum -*-------------------------------------------------------------------------- -* DESCRIPTION : Perform YYVU planar to BGR888 conversion. -*-------------------------------------------------------------------------- -* C PROTOTYPE : void yyvup2bgr888_venum(uint8_t *p_y, -* uint8_t *p_cr, -* uint8_t *p_cb, -* uint8_t *p_bgr888, -* uint32_t length) -*-------------------------------------------------------------------------- -* REG INPUT : R0: uint8_t *p_y -* pointer to the input Y Line -* R1: uint8_t *p_cr -* pointer to the input Cr Line -* R2: uint8_t *p_cb -* pointer to the input Cb Line -* R3: uint8_t *p_bgr888 -* pointer to the output BGR Line -* R12: uint32_t length -* width of Line -*-------------------------------------------------------------------------- -* STACK ARG : None -*-------------------------------------------------------------------------- -* REG OUTPUT : None -*-------------------------------------------------------------------------- -* MEM INPUT : p_y - a line of Y pixels -* p_cr - a line of Cr pixels -* p_cb - a line of Cb pixels -* length - the width of the input line -*-------------------------------------------------------------------------- -* MEM OUTPUT : p_bgr888 - the converted bgr pixels -*-------------------------------------------------------------------------- -* REG AFFECTED : ARM: R0-R4, R12 -* NEON: Q0-Q15 -*-------------------------------------------------------------------------- -* STACK USAGE : none -*-------------------------------------------------------------------------- -* CYCLES : none -* -*-------------------------------------------------------------------------- -* NOTES : -*-------------------------------------------------------------------------- -*/ -.type yyvup2bgr888_venum, %function -yyvup2bgr888_venum: - /*------------------------------------------------------------------------- - * Store stack registers - * ------------------------------------------------------------------------ */ - STMFD SP!, {LR} - - VPUSH {D8-D15} - - PLD [R0, R3] @ preload luma line - - ADR R12, constants - - VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0 - VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X - - /*------------------------------------------------------------------------- - * Load the 5th parameter via stack - * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above - * parameters are passed via stack - * ------------------------------------------------------------------------ */ - LDR R12, [SP, #68] @ LR is pushed into the stack so SP is - @ decreased by 4, - @ D8-D15 are also pushed into the stack - @ so SP is decreased by - @ 8-byte/D-Register * 8 D-Registers = 64, - @ so SP needs to be increased by 64+4=68 - @ to get the value that was first pushed - @ into stack (the 5th parameter passed in - @ throught stack) - - /*------------------------------------------------------------------------- - * Load clamping parameters to duplicate vector elements - * ------------------------------------------------------------------------ */ - VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 - VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255 - - /*------------------------------------------------------------------------- - * Read bias - * ------------------------------------------------------------------------ */ - VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824 - VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816 - VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688 - - - /*------------------------------------------------------------------------- - * The main loop - * ------------------------------------------------------------------------ */ -loop_yyvup2bgr888: - - /*------------------------------------------------------------------------- - * Load input from Y, V and U - * D12, D13: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14, Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15 - * D14 : V0 V1 V2 V3 V4 V5 V6 V7 - * D15 : U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VLD2.U8 {D12,D13}, [p_y]! @ Load 16 Luma elements (uint8) to D12, D13 - VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14 - VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15 - - /*------------------------------------------------------------------------- - * Expand uint8 value to uint16 - * D24, D25: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14 - * D26, D27: Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15 - * D28, D29: V0 V1 V2 V3 V4 V5 V6 V7 - * D30, D31: U0 U1 U2 U3 U4 U5 U6 U7 - * ------------------------------------------------------------------------ */ - VMOVL.U8 Q12, D12 - VMOVL.U8 Q13, D13 - VMOVL.U8 Q14, D14 - VMOVL.U8 Q15, D15 - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q6, D28, D6[0] @ Q6: 359*(V0,V1,V2,V3) Red - VMULL.S16 Q7, D30, D6[1] @ Q7: -88*(U0,U1,U2,U3) Green - VMLAL.S16 Q7, D28, D6[2] @ q7: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3) - VMULL.S16 Q8, D30, D6[3] @ q8: 454*(U0,U1,U2,U3) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q6, Q0 @ Q6 add Red bias -45824 - VADD.S32 Q7, Q1 @ Q7 add Green bias 34816 - VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMOV.S32 Q9, Q6 - VMLAL.S16 Q6, D24, D7[0] @ Q6: R0, R2, R4, R6 in 32-bit Q8 format - VMLAL.S16 Q9, D26, D7[0] @ Q9: R1, R3, R5, R7 in 32-bit Q8 format - - VMOV.S32 Q10, Q7 - VMLAL.S16 Q7, D24, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format - VMLAL.S16 Q10, D26, D7[0] @ Q10: G1, G3, G5, G7 in 32-bit Q8 format - - VMOV.S32 Q11, Q8 - VMLAL.S16 Q8, D24, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format - VMLAL.S16 Q11, D26, D7[0] @ Q11: B1, B3, B5, B7 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D12, Q6, #8 @ D12: R0 R2 R4 R6 in 16-bit Q0 format - VSHRN.S32 D13, Q9, #8 @ D13: R1 R3 R5 R7 in 16-bit Q0 format - VZIP.16 D12, D13 @ Q6 : R0 R1 R2 R3 R4 R5 R6 R7 - - VSHRN.S32 D18, Q7, #8 @ D18: G0 G2 G4 G6 in 16-bit Q0 format - VSHRN.S32 D19, Q10, #8 @ D19: G1 G3 G5 G7 in 16-bit Q0 format - VZIP.16 D18, D19 @ Q9 : G0 G1 G2 G3 G4 G5 G6 G7 - - VSHRN.S32 D20, Q8, #8 @ D20: B0 B2 B4 B6 in 16-bit Q0 format - VSHRN.S32 D21, Q11, #8 @ D21: B1 B3 B5 B7 in 16-bit Q0 format - VZIP.16 D20, D21 @ Q10: B0 B1 B2 B3 B4 B5 B6 B7 - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8 - - VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0 - VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255 - VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8 - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yyvup2bgr888 @ jump to trailing processing if remaining length is less than 8 - - VST3.U8 {D21,D22,D23}, [p_bgr]! @ vector store Blue, Green, Red to destination - @ Red at LSB - - BEQ end_yyvup2bgr888 @ done if exactly 8 pixel processed in the loop - - /*------------------------------------------------------------------------- - * Done with the first 8 elements, continue on the next 8 elements - * ------------------------------------------------------------------------ */ - - /*------------------------------------------------------------------------- - * Multiply contribution from chrominance, results are in 32-bit - * ------------------------------------------------------------------------ */ - VMULL.S16 Q6, D29, D6[0] @ Q6: 359*(V4,V5,V6,V7) Red - VMULL.S16 Q7, D31, D6[1] @ Q7: -88*(U4,U5,U6,U7) Green - VMLAL.S16 Q7, D29, D6[2] @ Q7: -88*(U4,U5,U6,U7) - 183*(V4,V5,V6,V7) - VMULL.S16 Q8, D31, D6[3] @ Q8: 454*(U4,U5,U6,U7) Blue - - /*------------------------------------------------------------------------- - * Add bias - * ------------------------------------------------------------------------ */ - VADD.S32 Q6, Q0 @ Q6 add Red bias -45824 - VADD.S32 Q7, Q1 @ Q7 add Green bias 34816 - VADD.S32 Q8, Q2 @ Q8 add Blue bias -70688 - - /*------------------------------------------------------------------------- - * Calculate Red, Green, Blue - * ------------------------------------------------------------------------ */ - VMOV.S32 Q9, Q6 - VMLAL.S16 Q6, D25, D7[0] @ Q6: R8 R10 R12 R14 in 32-bit Q8 format - VMLAL.S16 Q9, D27, D7[0] @ Q9: R9 R11 R13 R15 in 32-bit Q8 format - - VMOV.S32 Q10, Q7 - VMLAL.S16 Q7, D25, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format - VMLAL.S16 Q10, D27, D7[0] @ Q10 : G1, G3, G5, G7 in 32-bit Q8 format - - VMOV.S32 Q11, Q8 - VMLAL.S16 Q8, D25, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format - VMLAL.S16 Q11, D27, D7[0] @ Q11 : B1, B3, B5, B7 in 32-bit Q8 format - - /*------------------------------------------------------------------------- - * Right shift eight bits with rounding - * ------------------------------------------------------------------------ */ - VSHRN.S32 D12, Q6, #8 @ D12: R8 R10 R12 R14 in 16-bit Q0 format - VSHRN.S32 D13, Q9, #8 @ D13: R9 R11 R13 R15 in 16-bit Q0 format - VZIP.16 D12, D13 @ Q6: R8 R9 R10 R11 R12 R13 R14 R15 - - VSHRN.S32 D18, Q7, #8 @ D18: G8 G10 G12 G14 in 16-bit Q0 format - VSHRN.S32 D19, Q10, #8 @ D19: G9 G11 G13 G15 in 16-bit Q0 format - VZIP.16 D18, D19 @ Q9: G8 G9 G10 G11 G12 G13 G14 G15 - - VSHRN.S32 D20, Q8, #8 @ D20: B8 B10 B12 B14 in 16-bit Q0 format - VSHRN.S32 D21, Q11, #8 @ D21: B9 B11 B13 B15 in 16-bit Q0 format - VZIP.16 D20, D21 @ Q10: B8 B9 B10 B11 B12 B13 B14 B15 - - /*------------------------------------------------------------------------- - * Clamp the value to be within [0~255] - * ------------------------------------------------------------------------ */ - VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0 - VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255 - VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8 - - VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0 - VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255 - VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8 - - VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0 - VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255 - VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8 - - - SUBS length, length, #8 @ check if the length is less than 8 - - BMI trailing_yyvup2bgr888 @ jump to trailing processing if remaining length is less than 8 - - VST3.U8 {D21,D22,D23}, [p_bgr]! @ vector store Blue, Green, Red to destination - @ Red at LSB - - BHI loop_yyvup2bgr888 @ loop if more than 8 pixels left - - BEQ end_yyvup2bgr888 @ done if exactly 8 pixel processed in the loop - - -trailing_yyvup2bgr888: - /*------------------------------------------------------------------------- - * There are from 1 ~ 7 pixels left in the trailing part. - * First adding 7 to the length so the length would be from 0 ~ 6. - * eg: 1 pixel left in the trailing part, so 1-8+7 = 0. - * Then save 1 pixel unconditionally since at least 1 pixels left in the - * trailing part. - * ------------------------------------------------------------------------ */ - ADDS length, length, #7 @ there are 7 or less in the trailing part - - VST3.U8 {D21[0],D22[0],D23[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part - BEQ end_yyvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D21[1],D22[1],D23[1]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D21[2],D22[2],D23[2]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D21[3],D22[3],D23[3]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D21[4],D22[4],D23[4]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D21[5],D22[5],D23[5]}, [p_bgr]! @ store one more pixel - BEQ end_yyvup2bgr888 @ done if 0 pixel left - - SUBS length, length, #1 @ update length counter - VST3.U8 {D21[6],D22[6],D23[6]}, [p_bgr]! @ store one more pixel - -end_yyvup2bgr888: - VPOP {D8-D15} - LDMFD SP!, {PC} - - @ end of yyvup2bgr888 - -.end diff --git a/libjpegtwrp/asm/armv7/jdidct-armv7.S b/libjpegtwrp/asm/armv7/jdidct-armv7.S deleted file mode 100644 index d61e219f7..000000000 --- a/libjpegtwrp/asm/armv7/jdidct-armv7.S +++ /dev/null @@ -1,762 +0,0 @@ -/*========================================================================= -* jdidct-armv7.s -* -* Copyright (c) 2010, Code Aurora Forum. All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are -* met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above -* copyright notice, this list of conditions and the following -* disclaimer in the documentation and/or other materials provided -* with the distribution. -* * Neither the name of Code Aurora Forum, Inc. nor the names of its -* contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*========================================================================== - -*========================================================================== -* FUNCTION LIST -*-------------------------------------------------------------------------- -* - idct_1x1_venum -* - idct_2x2_venum -* - idct_4x4_venum -* - idct_8x8_venum -* -*========================================================================== -*/ - -@========================================================================== -@ MACRO DEFINITION -@========================================================================== - .macro Transpose8x8 - @================================================================== - @ Transpose an 8 x 8 x 16 bit matrix in place - @ Input: q8 to q15 - @ Output: q8 to q15 - @ Registers used: q8 to q15 - @ Assumptions: 8 x 8 x 16 bit data - @================================================================== - - vswp d17, d24 @q8, q12 - vswp d23, d30 @q11, q15 - vswp d21, d28 @q10, q14 - vswp d19, d26 @q9, q13 - - vtrn.32 q8, q10 - vtrn.32 q9, q11 - vtrn.32 q12, q14 - vtrn.32 q13, q15 - - vtrn.16 q8, q9 - vtrn.16 q10, q11 - vtrn.16 q12, q13 - vtrn.16 q14, q15 - .endm - - .macro IDCT1D - @================================================================== - @ One dimensional 64 element inverse DCT - @ Input: q8 to q15 loaded with data - @ q0 loaded with constants - @ Output: q8 to q15 - @ Registers used: q0, q4 to q15 - @ Assumptions: 16 bit data, first elements in least significant - @ halfwords - @================================================================== - - @1st stage - vqrdmulh.s16 q4, q15, d0[2] @q4 = a1*vx7 - vqrdmulh.s16 q5, q9, d0[2] @q5 = a1*vx1 - vqrdmulh.s16 q6, q13, d0[3] @q6 = a2*vx5 - vqrdmulh.s16 q7, q11, d1[1] @q7 = ma2*vx3 - vqrdmulh.s16 q2, q14, d0[1] @q6 = a0*vx6 - vqrdmulh.s16 q3, q10, d0[1] @q7 = a0*vx2 - vqadd.s16 q9, q4, q9 @q9 = t1 = a1*vx7 + vx1 - vqsub.s16 q5, q5, q15 @q5 = t8 = a1*vx1 - vx7 - vqadd.s16 q15, q6, q11 @q15 = t7 = a2*vx5 + vx3 - vqadd.s16 q11, q7, q13 @q11 = t3 = ma2*vx3 + vx5 - - @2nd stage - vqadd.s16 q13, q8, q12 @q13 = t5 = vx0 + vx4 - vqsub.s16 q8, q8, q12 @q8 = t0 = vx0 - vx4 - vqadd.s16 q10, q2, q10 @q10 = t2 = a0*vx6 + vx2 - vqsub.s16 q12, q3, q14 @q12 = t4 = a0*vx2 - vx6 - vqadd.s16 q14, q5, q11 @q14 = t6 = t8 + t3 - vqsub.s16 q11, q5, q11 @q11 = t3 = t8 - t3 - vqsub.s16 q5, q9, q15 @q5 = t8 = t1 - t7 - vqadd.s16 q9, q9, q15 @q9 = t1 = t1 + t7 - - @3rd stage - vqadd.s16 q15, q13, q10 @q15 = t7 = t5 + t2 - vqsub.s16 q10, q13, q10 @q10 = t2 = t5 - t2 - vqadd.s16 q13, q8, q12 @q13 = t5 = t0 + t4 - vqsub.s16 q7, q8, q12 @q7 = t0 = t0 - t4 - vqsub.s16 q12, q5, q11 @q12 = t4 = t8 - t3 - vqadd.s16 q11, q5, q11 @q11 = t3 = t8 + t3 - - @4th stage - vqadd.s16 q8, q15, q9 @q8 = vy0 = t7 + t1 - vqsub.s16 q15, q15, q9 @q15 = vy7 = t7 - t1 - vqrdmulh.s16 q6, q12, d0[0] @q6 = c4*t4 - vqrdmulh.s16 q4, q11, d0[0] @q4 = c4*t3 - vqsub.s16 q12, q10, q14 @q12 = vy4 = t2 - t6 - vqadd.s16 q11, q10, q14 @q11 = vy3 = t2 + t6 - vqadd.s16 q10, q7, q6 @q10 = vy2 = t0 + c4*t4 - vqsub.s16 q14, q13, q4 @q14 = vy6 = t5 - c4*t3 - vqadd.s16 q9, q13, q4 @q9 = vy1 = t5 + c4*t3 - vqsub.s16 q13, q7, q6 @q13 = vy5 = t0 - c4*t4 - .endm - - .macro PART1 - @================================================================== - @ Load input input data from memory and shift - @================================================================== - vld1.16 {d16, d17},[r0]! @q8 =row0 - vqshl.s16 q8, q8, #4 @Input data too big?!! - @Maximum MPEG input is 2047/-2048. - vld1.16 {d18, d19},[r0]! @q9 =row1 - vqshl.s16 q9, q9, #4 @Shift 1 instead of 4 - - vld1.16 {d20, d21},[r0]! @q10=row2 - vqshl.s16 q10, q10, #4 - - vld1.16 {d22, d23},[r0]! @q11=row3 - vqshl.s16 q11, q11, #4 - - vld1.16 {d24, d25},[r0]! @q12=row4 - vqshl.s16 q12, q12, #4 - - vld1.16 {d26, d27},[r0]! @q13=row5 - vqshl.s16 q13, q13, #4 - vld1.16 {d28, d29},[r0]! @q14=row6 - vqshl.s16 q14, q14, #4 - vld1.16 {d30, d31},[r0]! @q15=row7 - vqshl.s16 q15, q15, #4 - - @================================================================== - @ refresh the constants that was clobbered last time through IDCT1D - @================================================================== - vld1.16 {d4, d5},[r7] @q2 =constants[2] - vld1.16 {d6, d7},[r8] @q3 =constants[3] - vld1.16 {d8, d9},[r9] @q4 =constants[4] - .endm - - .macro PART2 - @================================================================== - @ Prescale the input - @================================================================== - vqrdmulh.s16 q12, q12, q1 @q12=row4 * constants[1] = vx4 - vqrdmulh.s16 q15, q15, q2 @q15=row7 * constants[2] = vx7 - vqrdmulh.s16 q9, q9, q2 @q9 =row1 * constants[2] = vx1 - vqrdmulh.s16 q13, q13, q4 @q13=row5 * constants[4] = vx5 - vqrdmulh.s16 q11, q11, q4 @q11=row3 * constants[4] = vx3 - vqrdmulh.s16 q14, q14, q3 @q14=row6 * constants[3] = vx6 - vqrdmulh.s16 q10, q10, q3 @q10=row2 * constants[3] = vx2 - vqrdmulh.s16 q8, q8, q1 @q8 =row0 * constants[1] = vx0 - - @================================================================== - @ At thsi point, the input 8x8 x 16 bit coefficients are - @ transposed, prescaled, and loaded in q8 to q15 - @ q0 loaded with scalar constants - @ Perform 1D IDCT - @================================================================== - IDCT1D @perform 1d idct - - @================================================================== - @ Transpose the intermediate results to get read for vertical - @ transformation - @================================================================== - vswp d17, d24 @q8, q12 - vswp d23, d30 @q11, q15 - vswp d21, d28 @q10, q14 - vswp d19, d26 @q9, q13 - - @================================================================== - @ Load the bias - @================================================================== - vdup.32 q4, d1[1] @a cycle is saved by loading - @the bias at this point - - @================================================================== - @ Finish the transposition - @================================================================== - vtrn.32 q8, q10 - vtrn.32 q9, q11 - vtrn.32 q12, q14 - vtrn.32 q13, q15 - vtrn.16 q8, q9 - vtrn.16 q10, q11 - vtrn.16 q12, q13 - vtrn.16 q14, q15 - - @================================================================== - @ Add bias - @================================================================== - vqadd.s16 q8, q8, q4 - - @================================================================== - @ IDCT 2nd half - @================================================================== - IDCT1D @perform 1d dct - - @================================================================== - @ Scale and clamp the output to correct range and save to memory - @ 1. scale to 8bits by right shift 6 - @ 2. clamp output to [0, 255] by min/max - @ 3. use multiple store. Each store will save one row of output. - @ The st queue size is 4, so do no more than 4 str in sequence. - @================================================================== - ldr r5, =constants+5*16 @constants[5], - vld1.16 d10, [r5] @load clamping parameters - vdup.s16 q6, d10[0] @q6=[0000000000000000] - vdup.s16 q7, d10[1] @q7=[FFFFFFFFFFFFFFFF] - - @Save the results - vshr.s16 q8, q8, #6 @q8 = vy0 - vmax.s16 q8, q8, q6 @clamp >0 - vmin.s16 q8, q8, q7 @clamp <255 - - vshr.s16 q9, q9, #6 @q9 = vy1 - vmax.s16 q9, q9, q6 @clamp >0 - vmin.s16 q9, q9, q7 @clamp <255 - - vshr.s16 q10, q10, #6 @q10 = vy2 - vmax.s16 q10, q10, q6 @clamp >0 - vmin.s16 q10, q10, q7 @clamp <255 - - vshr.s16 q11, q11, #6 @q11 = vy3 - vmax.s16 q11, q11, q6 @clamp >0 - vmin.s16 q11, q11, q7 @clamp <255 - - vst1.16 {d16, d17},[r1],r2 @q8 =row0 - vst1.16 {d18, d19},[r1],r2 @q9 =row1 - vst1.16 {d20, d21},[r1],r2 @q10=row2 - vst1.16 {d22, d23},[r1],r2 @q11=row3 - - vshr.s16 q12, q12, #6 @q12 = vy4 - vmax.s16 q12, q12, q6 @clamp >0 - vmin.s16 q12, q12, q7 @clamp <255 - - vshr.s16 q13, q13, #6 @q13 = vy5 - vmax.s16 q13, q13, q6 @clamp >0 - vmin.s16 q13, q13, q7 @clamp <255 - - vshr.s16 q14, q14, #6 @q14 = vy6 - vmax.s16 q14, q14, q6 @clamp >0 - vmin.s16 q14, q14, q7 @clamp <255 - - vshr.s16 q15, q15, #6 @q15 = vy7 - vmax.s16 q15, q15, q6 @clamp >0 - vmin.s16 q15, q15, q7 @clamp <255 - - vst1.16 {d24, d25},[r1],r2 @q12=row4 - vst1.16 {d26, d27},[r1],r2 @q13=row5 - vst1.16 {d28, d29},[r1],r2 @q14=row6 - vst1.16 {d30, d31},[r1] @q15=row7 - .endm - - .macro BIG_BODY_TRANSPOSE_INPUT - @================================================================== - @ Main body of idct - @================================================================== - PART1 - Transpose8x8 - PART2 - .endm - - .macro IDCT_ENTRY - @================================================================== - @ Load the locations of the constants - @================================================================== - ldr r5, =constants+0*16 @constants[0] - ldr r6, =constants+1*16 @constants[1] - ldr r7, =constants+2*16 @constants[2] - ldr r8, =constants+3*16 @constants[3] - ldr r9, =constants+4*16 @constants[4] - - @================================================================== - @ Load the coefficients - @ only some input coefficients are load due to register constrain - @================================================================== - vld1.16 {d0, d1},[r5] @q0 =constants[0] (scalars) - vld1.16 {d2, d3},[r6] @q1 =constants[1] - .endm -@========================================================================== -@ END of MACRO DEFINITION -@========================================================================== - - - .section idct_func, "x" @ ARE - .text @ idct_func, CODE, READONLY - .align 2 - .code 32 @ CODE32 - -@========================================================================== -@ Main Routine -@========================================================================== - - .global idct_1x1_venum - .global idct_2x2_venum - .global idct_4x4_venum - .global idct_8x8_venum - -@========================================================================== -@ FUNCTION : idct_1x1_venum -@-------------------------------------------------------------------------- -@ DISCRIPTION : ARM optimization of one 1x1 block iDCT -@-------------------------------------------------------------------------- -@ C PROTOTYPE : void idct_1x1_venum(int16 * input, -@ int16 * output, -@ int32 stride) -@-------------------------------------------------------------------------- -@ REG INPUT : R0 pointer to input (int16) -@ R1 pointer to output (int16) -@ R2 block stride -@-------------------------------------------------------------------------- -@ STACK ARG : None -@-------------------------------------------------------------------------- -@ MEM INPUT : None -@-------------------------------------------------------------------------- -@ REG OUTPUT : None -@-------------------------------------------------------------------------- -@ MEM OUTPUT : None -@-------------------------------------------------------------------------- -@ REG AFFECTED : R0 - R2 -@-------------------------------------------------------------------------- -@ STACK USAGE : none -@-------------------------------------------------------------------------- -@ CYCLES : 17 cycles -@-------------------------------------------------------------------------- -@ NOTES : -@ This idct_1x1_venum code was developed with ARM instruction set. -@ -@ ARM REGISTER ALLOCATION -@ ========================================================================= -@ r0 : pointer to input data -@ r1 : pointer to output area -@ r2 : stride in the output buffer -@========================================================================== -.type idct_1x1_venum, %function -idct_1x1_venum: - - ldrsh r3, [r0] @ Load signed half word (int16) - ldr r2, =1028 @ 1028 = 4 + 128 << 3 - @ 4 for rounding, 128 for offset - add r2, r3, r2 - asrs r2, r2, #3 @ Divide by 8, and set status bit - movmi r2, #0 @ Clamp to be greater than 0 - cmp r2, #255 - movgt r2, #255 @ Clamp to be less than 255 - str r2, [r1] @ Save output - bx lr @ Return to caller - - @ end of idct_1x1_venum - - -@========================================================================== -@ FUNCTION : idct_2x2_venum -@-------------------------------------------------------------------------- -@ DISCRIPTION : VeNum optimization of one 2x2 block iDCT -@-------------------------------------------------------------------------- -@ C PROTOTYPE : void idct_2x2_venum(int16 * input, -@ int16 * output, -@ int32 stride) -@-------------------------------------------------------------------------- -@ REG INPUT : R0 pointer to input (int16) -@ R1 pointer to output (int16) -@ R2 block stride -@-------------------------------------------------------------------------- -@ STACK ARG : None -@-------------------------------------------------------------------------- -@ MEM INPUT : None -@-------------------------------------------------------------------------- -@ REG OUTPUT : None -@-------------------------------------------------------------------------- -@ MEM OUTPUT : None -@-------------------------------------------------------------------------- -@ REG AFFECTED : R0 - R2 -@-------------------------------------------------------------------------- -@ STACK USAGE : none -@-------------------------------------------------------------------------- -@ CYCLES : 27 cycles -@-------------------------------------------------------------------------- -@ NOTES : Output buffer must be an 8x8 16-bit buffer -@ -@ ARM REGISTER ALLOCATION -@ ========================================== -@ r0 : pointer to input data -@ r1 : pointer to output area -@ r2 : stride in the output buffer -@ ------------------------------------------- -@ -@ VENUM REGISTER ALLOCATION -@ ================================================= -@ q0 : output x0 - x4 -@ q1 : not used -@ q2 : not used -@ q3 : not used -@ q4 : not used -@ q5 : not used -@ q6 : not used -@ q7 : not used -@ q8 : input y0 - y4 -@ q9 : intermediate value -@ q10 : intermediate value -@ q11 : offset value -@ q12 : clamp value -@ q13 : not used -@ q14 : not used -@ q15 : not used -@========================================================================== -.type idct_2x2_venum, %function -idct_2x2_venum: - - vld4.32 {d16, d17, d18, d19}, [r0] - @ d16: y0 | y1 | y2 | y3 (LSB | MSB) - - vtrn.32 d16, d17 @ d16: y0 | y1 | X | X - @ d17: y2 | y3 | X | X - - vqadd.s16 d18, d16, d17 @ d18: y0+y2 | y1+y3 | X | X q: saturated - vqsub.s16 d19, d16, d17 @ d19: y0-y2 | y1-y3 | X | X q: saturated - - vtrn.16 d18, d19 @ d18: y0+y2 | y0-y2 | X | X - @ d19: y1+y3 | y1-y3 | X | X - - vqadd.s16 d20, d18, d19 @ d20: (y0+y2)+(y1+y3) | (y0-y2)+(y1-y3) - @ x0 | x2 | X | X - vqsub.s16 d21, d18, d19 @ d21: (y0+y2)-(y1+y3) | (y0-y2)-(y1-y3) - @ x1 | x3 | X | X - - vtrn.16 d20, d21 @ d20: x0 | x1 | X | X - @ d21: x2 | x3 | X | X - - vrshr.s16 q10, q10, #3 @ Divide by 8 - - vmov.i16 q11, #128 @ q11 = 128|128|128|128|128|128|128|128 - vqadd.s16 q0, q10, q11 @ Add offset to make output in [0,255] - - vmov.i16 q12, #0 @ q12 = [0000000000000000] - vmov.i16 q13, #255 @ q13 = [FFFFFFFFFFFFFFFF] (hex) - - vmax.s16 q0, q0, q12 @ Clamp > 0 - vmin.s16 q0, q0, q13 @ Clamp < 255 - - vstr d0, [r1] @ Store x0 | x1 | X | X - @ Potential out of boundary issue - add r1, r1, r2 @ Add the offset to the output pointer - vstr d1, [r1] @ Store x2 | x3 | X | X - @ Potential out of boundary issue - bx lr @ Return to caller - - @ end of idct_2x2_venum - - -@========================================================================== -@ FUNCTION : idct_4x4_venum -@-------------------------------------------------------------------------- -@ DISCRIPTION : VeNum optimization of one 4x4 block iDCT -@-------------------------------------------------------------------------- -@ C PROTOTYPE : void idct_4x4_venum(int16 * input, -@ int16 * output, -@ int32 stride) -@-------------------------------------------------------------------------- -@ REG INPUT : R0 pointer to input (int16) -@ R1 pointer to output (int16) -@ R2 block stride -@-------------------------------------------------------------------------- -@ STACK ARG : None -@-------------------------------------------------------------------------- -@ MEM INPUT : None -@-------------------------------------------------------------------------- -@ REG OUTPUT : None -@-------------------------------------------------------------------------- -@ MEM OUTPUT : None -@-------------------------------------------------------------------------- -@ REG AFFECTED : R0 - R3, R12 -@-------------------------------------------------------------------------- -@ STACK USAGE : none -@-------------------------------------------------------------------------- -@ CYCLES : 56 cycles -@-------------------------------------------------------------------------- -@ NOTES : -@ -@ ARM REGISTER ALLOCATION -@ ========================================== -@ r0 : pointer to input data -@ r1 : pointer to output area -@ r2 : stride in the output buffer -@ r3 : pointer to the coefficient set -@ r12 : pointer to the coefficient set -@ ------------------------------------------- -@ -@ VENUM REGISTER ALLOCATION -@ ================================================= -@ q0 : coefficients[0] -@ q1 : coefficients[1] -@ q2 : coefficients[2] -@ q3 : coefficients[3] -@ q4 : not used -@ q5 : not used -@ q6 : not used -@ q7 : not used -@ q8 : input y0 - y7 -@ q9 : input y8 - y15 -@ q10 : intermediate value -@ q11 : intermediate value -@ q12 : intermediate value -@ q13 : intermediate value -@ q14 : intermediate value -@ q15 : intermediate value -@========================================================================== -.type idct_4x4_venum, %function -idct_4x4_venum: - - @ Load the locations of the first 2 sets of coefficients - ldr r3, =coefficient+0*16 @ coefficient[0] - ldr r12, =coefficient+1*16 @ coefficient[1] - - @ Load the first 2 sets of coefficients - vld1.16 {d0, d1},[r3] @ q0 = C4 | C2 | C4 | C6 | C4 | C2 | C4 | C6 - vld1.16 {d2, d3},[r12] @ q1 = C4 | C6 | C4 | C2 | C4 | C6 | C4 | C2 - - @ Load the locations of the second 2 sets of coefficients - ldr r3, =coefficient+2*16 @ coefficient[2] - ldr r12, =coefficient+3*16 @ coefficient[3] - - @ Load the second 2 sets of coefficients - vld1.16 {d4, d5},[r3] @ q2 = C4 | C4 | C4 | C4 | C2 | C2 | C2 | C2 - vld1.16 {d6, d7},[r12] @ q3 = C4 | C4 | C4 | C4 | C6 | C6 | C6 | C6 - - @ Load the input values - vld1.16 {d16}, [r0], r2 @ d16: y0 | y1 | y2 | y3 (LSB | MSB) - vld1.16 {d17}, [r0], r2 @ d17: y4 | y5 | y6 | y7 (LSB | MSB) - vld1.16 {d18}, [r0], r2 @ d18: y8 | y9 | y10 | y11 (LSB | MSB) - vld1.16 {d19}, [r0], r2 @ d19: y12 | y13 | y14 | y15 (LSB | MSB) - - @ Apply iDCT Horizonally - - @ q8: y0 |y1 |y2 |y3 |y4 |y5 |y6 |y7 - @ q9: y8 |y9 |y10|y11|y12|y13|y14|y15 - - @====================================================================== - @ vqrdmulh doubles the result and save the high 16 bits of the result, - @ this is equivalent to right shift by 15 bits. - @ since coefficients are in Q15 format, it contradicts with the right - @ shift 15 here, so the final result is in Q0 format - @ - @ vqrdmulh will also round the result - @====================================================================== - - vqrdmulh.s16 q10, q8, q0 @ q10: C4*y0 | C2*y1 | C4*y2 | C6*y3 | C4*y4 | C2*y5 | C4*y6 | C6*y7 - vqrdmulh.s16 q11, q8, q1 @ q11: C4*y0 | C6*y1 | C4*y2 | C2*y3 | C4*y4 | C6*y5 | C4*y6 | C2*y7 - - vqrdmulh.s16 q12, q9, q0 @ q12: C4*y8 | C2*y9 | C4*y10 | C6*y11 | C4*y12 | C2*y13 | C4*y14 | C6*y15 - vqrdmulh.s16 q13, q9, q1 @ q13: C4*y8 | C6*y9 | C4*y10 | C2*y11 | C4*y12 | C6*y13 | C4*y14 | C2*y15 - - vtrn.32 q10, q12 @ q10: C4*y0 | C2*y1 | C4*y8 | C2*y9 | C4*y4 | C2*y5 | C4*y12 | C2*y13 - @ q12: C4*y2 | C6*y3 | C4*y10 | C6*y11 | C4*y6 | C6*y7 | C4*y14 | C6*y15 - - vtrn.32 q11, q13 @ q11: C4*y0 | C6*y1 | C4*y8 | C6*y9 | C4*y4 | C6*y5 | C4*y12 | C6*y13 - @ q13: C4*y2 | C2*y3 | C4*y10 | C2*y11 | C4*y6 | C2*y7 | C4*y14 | C2*y15 - - vqadd.s16 q14, q10, q12 @ q14: C4*y0 + C4*y2 | C2*y1 + C6*y3 | C4*y8 + C4*y10 | C2*y9 + C6*y11 | C4*y4 + C4*y6 | C2*y5 + C6*y7 | C4*y12 + C4*y14 | C2*y13 + C6*y15 - @ S0 | S2 | S8 | S10 | S4 | S6 | S12 | S14 - - vqsub.s16 q15, q11, q13 @ q15: C4*y0 - C4*y2 | C6*y1 - C2*y3 | C4*y8 - C4*y10 | C6*y9 - C2*y11 | C4*y4 - C4*y6 | C6*y5 - C2*y7 | C4*y12 - C4*y14 | C6*y13 - C2*y15 - @ S1 | S3 | S9 | S11 | S5 | S7 | S13 | S15 - - vtrn.16 q14, q15 @ q14: S0 | S1 | S8 | S9 | S4 | S5 | S12 | S13 - @ q15: S2 | S3 | S10 | S11 | S6 | S7 | S14 | S15 - - vqadd.s16 q8, q14, q15 @ q8: Z0 | Z1 | Z8 | Z9 | Z4 | Z5 | Z12 | Z13 - vqsub.s16 q9, q14, q15 @ q9: Z3 | Z2 | Z11 | Z10 | Z7 | Z6 | Z15 | Z14 - vrev32.16 q9, q9 @ q9: Z2 | Z3 | Z10 | Z11 | Z6 | Z7 | Z14 | Z15 - - - @ Apply iDCT Vertically - - vtrn.32 q8, q9 @ q8: Z0 | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Z7 - @ q9: Z8 | Z9 | Z10 | Z11 | Z12 | Z13 | Z14 | Z15 - - - vqrdmulh.s16 q10, q8, q2 @ q10: C4*Z0 | C4*Z1 | C4*Z2 | C4*Z3 | C2*Z4 | C2*Z5 | C2*Z6 | C2*Z7 - vqrdmulh.s16 q11, q8, q3 @ q11: C4*Z0 | C4*Z1 | C4*Z2 | C4*Z3 | C6*Z4 | C6*Z5 | C6*Z6 | C6*Z7 - - vqrdmulh.s16 q12, q9, q2 @ q12: C4*Z8 | C4*Z9 | C4*Z10 | C4*Z11 | C2*Z12 | C2*Z13 | C2*Z14 | C2*Z15 - vqrdmulh.s16 q13, q9, q3 @ q13: C4*Z8 | C4*Z9 | C4*Z10 | C4*Z11 | C6*Z12 | C6*Z13 | C6*Z14 | C6*Z15 - - vqadd.s16 q14, q10, q13 @ q14: C4*Z0+C4*Z8 | C4*Z1+C4*Z9 | C4*Z2+C4*Z10 | C4*Z3+C4*Z11 | C2*Z4+C6*Z12 | C2*Z5+C6*Z13 | C2*Z6+C6*Z14 | C2*Z7+C6*Z15 - @ s0 | s4 | s8 | s12 | s2 | s6 | s10 | s14 - - vqsub.s16 q15, q11, q12 @ q15: C4*Z0-C4*Z8 | C4*Z1-C4*Z9 | C4*Z2-C4*Z10 | C4*Z3-C4*Z11 | C6*Z4-C2*Z12 | C6*Z5-C2*Z13 | C6*Z6-C2*Z14 | C6*Z7-C2*Z15 - @ s1 | s5 | s9 | s13 | s3 | s7 | s11 | s15 - - vswp d29, d30 @ q14: s0 | s4 | s8 | s12 | s1 | s5 | s9 | s13 - @ q15: s2 | s6 | s10 | s14 | s3 | s7 | s11 | s15 - - vqadd.s16 q8, q14, q15 @ q8: x0 | x4 | x8 | x12 | x1 | x5 | x9 | x13 - vqsub.s16 q9, q14, q15 @ q9: x3 | x7 | x11 | x15 | x2 | x6 | x10 | x14 - - vmov.i16 q10, #0 @ q10=[0000000000000000] - vmov.i16 q11, #255 @ q11=[FFFFFFFFFFFFFFFF] (hex) - - vmov.i16 q0, #128 @ q0 = 128|128|128|128|128|128|128|128 - - vqadd.s16 q8, q8, q0 @ Add the offset - vqadd.s16 q9, q9, q0 @ Add the offset - - vmax.s16 q8, q8, q10 @ clamp > 0 - vmin.s16 q8, q8, q11 @ clamp < 255 - - vmax.s16 q9, q9, q10 @ clamp > 0 - vmin.s16 q9, q9, q11 @ clamp < 255 - - vst1.16 {d16}, [r1], r2 @ d16: x0 | x1 | x2 | x3 (LSB | MSB) - vst1.16 {d17}, [r1], r2 @ d17: x4 | x5 | x6 | x7 (LSB | MSB) - vst1.16 {d19}, [r1], r2 @ d18: x8 | x9 | x10 | x11 (LSB | MSB) - vst1.16 {d18}, [r1], r2 @ d19: x12| x13 | x14 | x15 (LSB | MSB) - - bx lr @ Return to caller - - @ end of idct_4x4_venum - -@========================================================================== -@ FUNCTION : idct_8x8_venum -@-------------------------------------------------------------------------- -@ DISCRIPTION : VeNum optimization of one 8x8 block iDCT -@-------------------------------------------------------------------------- -@ C PROTOTYPE : void idct_8x8_venum(int16 * input, -@ int16 * output, -@ int32 stride) -@-------------------------------------------------------------------------- -@ REG INPUT : R0 pointer to input (int16) -@ R1 pointer to output (int16) -@ R2 block stride -@-------------------------------------------------------------------------- -@ STACK ARG : None -@-------------------------------------------------------------------------- -@ MEM INPUT : None -@-------------------------------------------------------------------------- -@ REG OUTPUT : None -@-------------------------------------------------------------------------- -@ MEM OUTPUT : None -@-------------------------------------------------------------------------- -@ REG AFFECTED : R0 - R9 -@-------------------------------------------------------------------------- -@ STACK USAGE : none -@-------------------------------------------------------------------------- -@ CYCLES : 177 cycles -@-------------------------------------------------------------------------- -@ NOTES : -@ -@ It was tested to be IEEE 1180 compliant. Since IEEE 1180 compliance is more stringent -@ than MPEG-4 compliance, this version is also MPEG-4 compliant. -@ -@ CODE STRUCTURE: -@ (i) Macros for transposing an 8x8 matrix and for configuring the VFP unit are defined. -@ (ii) Macro for IDCT in one dimension is defined as four stages -@ (iii) The two dimensional code begins -@ (iv) constants are defined in the area DataArea -@ -@ PROGRAM FLOW: -@ -@ The VFP is configured -@ The parameters to IDCT are loaded -@ the coefficients are loaded -@ loop: -@ decrement loop counter -@ The first input Matrix is loaded and pre-scaled -@ The input is prescaled using the constants -@ IDCT is performed in one dimension on the 8 columns -@ The matrix is transposed -@ A bias is loaded an added to the matrix -@ IDCT is performed in one dimension on the 8 rows -@ The matrix is post-scaled -@ The matrix is saved -@ test loop counter and loop if greater than zero -@ stop -@ -@ -@ ARM REGISTER ALLOCATION -@ ========================================== -@ r0 : pointer to input data -@ r1 : pointer to output are -@ r2 : stride in the output buffer -@ r3 : -@ r4 : -@ r5 : pointer to constants[0] [5] -@ r6 : pointer to constants[1] -@ r7 : pointer to constants[2] -@ r8 : pointer to constants[3] -@ r9 : pointer to constants[4] -@ ------------------------------------------- -@ -@ VENUM REGISTER ALLOCATION -@ ================================================= -@ q0 : constants[0] -@ q1 : constants[1] -@ q2 : constants[2], IDCT1D in-place scratch -@ q3 : constants[3], IDCT1D in-place scratch -@ q4 : constants[4], IDCT1D in-place scratch, and bias compensation -@ q5 : IDCT1D in-place scratch -@ q6 : IDCT1D in-place scratch -@ q7 : IDCT1D in-place scratch -@ q8 : Matrix[0] IDCT1D in-place scratch -@ q9 : Matrix[1] IDCT1D in-place scratch -@ q10 : Matrix[2] IDCT1D in-place scratch -@ q11 : Matrix[3] IDCT1D in-place scratch -@ q12 : Matrix[4] IDCT1D in-place scratch -@ q13 : Matrix[5] IDCT1D in-place scratch -@ q14 : Matrix[6] IDCT1D in-place scratch -@ q15 : Matrix[7] IDCT1D in-place scratch -@========================================================================== -.type idct_8x8_venum, %function -idct_8x8_venum: - - push {r5-r9} - vpush {d8-d15} - IDCT_ENTRY - BIG_BODY_TRANSPOSE_INPUT - vpop {d8-d15} - pop {r5-r9} - bx lr - @ end of idct_8x8_venum - -@========================================================================== -@ Constants Definition AREA: define idct kernel, bias -@========================================================================== - .section ro_data_area @ AREA RODataArea - .data @ DATA, READONLY - .align 5 @ ALIGN=5 - -constants: - .hword 23170, 13573, 6518, 21895, -23170, -21895, 8223, 8224 - .hword 16384, 22725, 21407, 19266, 16384, 19266, 21407, 22725 - .hword 22725, 31521, 29692, 26722, 22725, 26722, 29692, 31521 - .hword 21407, 29692, 27969, 25172, 21407, 25172, 27969, 29692 - .hword 19266, 26722, 25172, 22654, 19266, 22654, 25172, 26722 - .hword 0, 255, 0, 0 - -coefficient: @ These are the coefficent used by 4x4 iDCT in Q15 format - .hword 11585, 15137, 11585, 6270, 11585, 15137, 11585, 6270 @ C4, C2, C4, C6, C4, C2, C4, C6 /2 - .hword 11585, 6270, 11585, 15137, 11585, 6270, 11585, 15137 @ C4, C6, C4, C2, C4, C6, C4, C2 /2 - .hword 11585, 11585, 11585, 11585, 15137, 15137, 15137, 15137 @ C4, C4, C4, C4, C2, C2, C2, C2 /2 - .hword 11585, 11585, 11585, 11585, 6270, 6270, 6270, 6270 @ C4, C4, C4, C4, C6, C6, C6, C6 /2 - -.end diff --git a/libjpegtwrp/cderror.h b/libjpegtwrp/cderror.h deleted file mode 100644 index 70435e161..000000000 --- a/libjpegtwrp/cderror.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * cderror.h - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the error and message codes for the cjpeg/djpeg - * applications. These strings are not needed as part of the JPEG library - * proper. - * Edit this file to add new codes, or to translate the message strings to - * some other language. - */ - -/* - * To define the enum list of message codes, include this file without - * defining macro JMESSAGE. To create a message string table, include it - * again with a suitable JMESSAGE definition (see jerror.c for an example). - */ -#ifndef JMESSAGE -#ifndef CDERROR_H -#define CDERROR_H -/* First time through, define the enum list */ -#define JMAKE_ENUM_LIST -#else -/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ -#define JMESSAGE(code,string) -#endif /* CDERROR_H */ -#endif /* JMESSAGE */ - -#ifdef JMAKE_ENUM_LIST - -typedef enum { - -#define JMESSAGE(code,string) code , - -#endif /* JMAKE_ENUM_LIST */ - -JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */ - -#ifdef BMP_SUPPORTED -JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format") -JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported") -JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length") -JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1") -JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB") -JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported") -JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM") -JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image") -JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image") -JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image") -JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image") -#endif /* BMP_SUPPORTED */ - -#ifdef GIF_SUPPORTED -JMESSAGE(JERR_GIF_BUG, "GIF output got confused") -JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d") -JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB") -JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file") -JMESSAGE(JERR_GIF_NOT, "Not a GIF file") -JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image") -JMESSAGE(JTRC_GIF_BADVERSION, - "Warning: unexpected GIF version number '%c%c%c'") -JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x") -JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input") -JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file") -JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring") -JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image") -JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits") -#endif /* GIF_SUPPORTED */ - -#ifdef PPM_SUPPORTED -JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB") -JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file") -JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file") -JMESSAGE(JTRC_PGM, "%ux%u PGM image") -JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image") -JMESSAGE(JTRC_PPM, "%ux%u PPM image") -JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image") -#endif /* PPM_SUPPORTED */ - -#ifdef RLE_SUPPORTED -JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library") -JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB") -JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE") -JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file") -JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header") -JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header") -JMESSAGE(JERR_RLE_NOT, "Not an RLE file") -JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE") -JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup") -JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file") -JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d") -JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file") -JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d") -JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d") -#endif /* RLE_SUPPORTED */ - -#ifdef TARGA_SUPPORTED -JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format") -JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file") -JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB") -JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image") -JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image") -JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image") -#else -JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled") -#endif /* TARGA_SUPPORTED */ - -JMESSAGE(JERR_BAD_CMAP_FILE, - "Color map file is invalid or of unsupported format") -JMESSAGE(JERR_TOO_MANY_COLORS, - "Output file format cannot handle %d colormap entries") -JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed") -#ifdef TARGA_SUPPORTED -JMESSAGE(JERR_UNKNOWN_FORMAT, - "Unrecognized input file format --- perhaps you need -targa") -#else -JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format") -#endif -JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format") - -#ifdef JMAKE_ENUM_LIST - - JMSG_LASTADDONCODE -} ADDON_MESSAGE_CODE; - -#undef JMAKE_ENUM_LIST -#endif /* JMAKE_ENUM_LIST */ - -/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ -#undef JMESSAGE diff --git a/libjpegtwrp/cdjpeg.c b/libjpegtwrp/cdjpeg.c deleted file mode 100644 index b6250ff97..000000000 --- a/libjpegtwrp/cdjpeg.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * cdjpeg.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains common support routines used by the IJG application - * programs (cjpeg, djpeg, jpegtran). - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include /* to declare isupper(), tolower() */ -#ifdef NEED_SIGNAL_CATCHER -#include /* to declare signal() */ -#endif -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - - -/* - * Signal catcher to ensure that temporary files are removed before aborting. - * NB: for Amiga Manx C this is actually a global routine named _abort(); - * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... - */ - -#ifdef NEED_SIGNAL_CATCHER - -static j_common_ptr sig_cinfo; - -void /* must be global for Manx C */ -signal_catcher (int signum) -{ - if (sig_cinfo != NULL) { - if (sig_cinfo->err != NULL) /* turn off trace output */ - sig_cinfo->err->trace_level = 0; - jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ - } - exit(EXIT_FAILURE); -} - - -GLOBAL(void) -enable_signal_catcher (j_common_ptr cinfo) -{ - sig_cinfo = cinfo; -#ifdef SIGINT /* not all systems have SIGINT */ - signal(SIGINT, signal_catcher); -#endif -#ifdef SIGTERM /* not all systems have SIGTERM */ - signal(SIGTERM, signal_catcher); -#endif -} - -#endif - - -/* - * Optional progress monitor: display a percent-done figure on stderr. - */ - -#ifdef PROGRESS_REPORT - -METHODDEF(void) -progress_monitor (j_common_ptr cinfo) -{ - cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; - int total_passes = prog->pub.total_passes + prog->total_extra_passes; - int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); - - if (percent_done != prog->percent_done) { - prog->percent_done = percent_done; - if (total_passes > 1) { - fprintf(stderr, "\rPass %d/%d: %3d%% ", - prog->pub.completed_passes + prog->completed_extra_passes + 1, - total_passes, percent_done); - } else { - fprintf(stderr, "\r %3d%% ", percent_done); - } - fflush(stderr); - } -} - - -GLOBAL(void) -start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) -{ - /* Enable progress display, unless trace output is on */ - if (cinfo->err->trace_level == 0) { - progress->pub.progress_monitor = progress_monitor; - progress->completed_extra_passes = 0; - progress->total_extra_passes = 0; - progress->percent_done = -1; - cinfo->progress = &progress->pub; - } -} - - -GLOBAL(void) -end_progress_monitor (j_common_ptr cinfo) -{ - /* Clear away progress display */ - if (cinfo->err->trace_level == 0) { - fprintf(stderr, "\r \r"); - fflush(stderr); - } -} - -#endif - - -/* - * Case-insensitive matching of possibly-abbreviated keyword switches. - * keyword is the constant keyword (must be lower case already), - * minchars is length of minimum legal abbreviation. - */ - -GLOBAL(boolean) -keymatch (char * arg, const char * keyword, int minchars) -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return FALSE; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return FALSE; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return FALSE; - return TRUE; /* A-OK */ -} - - -/* - * Routines to establish binary I/O mode for stdin and stdout. - * Non-Unix systems often require some hacking to get out of text mode. - */ - -GLOBAL(FILE *) -read_stdin (void) -{ - FILE * input_file = stdin; - -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "Cannot reopen stdin\n"); - exit(EXIT_FAILURE); - } -#endif - return input_file; -} - - -GLOBAL(FILE *) -write_stdout (void) -{ - FILE * output_file = stdout; - -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdout), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { - fprintf(stderr, "Cannot reopen stdout\n"); - exit(EXIT_FAILURE); - } -#endif - return output_file; -} diff --git a/libjpegtwrp/cdjpeg.h b/libjpegtwrp/cdjpeg.h deleted file mode 100644 index 2b387b6e5..000000000 --- a/libjpegtwrp/cdjpeg.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * cdjpeg.h - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains common declarations for the sample applications - * cjpeg and djpeg. It is NOT used by the core JPEG library. - */ - -#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ -#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" /* get library error codes too */ -#include "cderror.h" /* get application-specific error codes */ - - -/* - * Object interface for cjpeg's source file decoding modules - */ - -typedef struct cjpeg_source_struct * cjpeg_source_ptr; - -struct cjpeg_source_struct { - JMETHOD(void, start_input, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); - JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); - JMETHOD(void, finish_input, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); - - FILE *input_file; - - JSAMPARRAY buffer; - JDIMENSION buffer_height; -}; - - -/* - * Object interface for djpeg's output file encoding modules - */ - -typedef struct djpeg_dest_struct * djpeg_dest_ptr; - -struct djpeg_dest_struct { - /* start_output is called after jpeg_start_decompress finishes. - * The color map will be ready at this time, if one is needed. - */ - JMETHOD(void, start_output, (j_decompress_ptr cinfo, - djpeg_dest_ptr dinfo)); - /* Emit the specified number of pixel rows from the buffer. */ - JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, - djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied)); - /* Finish up at the end of the image. */ - JMETHOD(void, finish_output, (j_decompress_ptr cinfo, - djpeg_dest_ptr dinfo)); - - /* Target file spec; filled in by djpeg.c after object is created. */ - FILE * output_file; - - /* Output pixel-row buffer. Created by module init or start_output. - * Width is cinfo->output_width * cinfo->output_components; - * height is buffer_height. - */ - JSAMPARRAY buffer; - JDIMENSION buffer_height; -}; - - -/* - * cjpeg/djpeg may need to perform extra passes to convert to or from - * the source/destination file format. The JPEG library does not know - * about these passes, but we'd like them to be counted by the progress - * monitor. We use an expanded progress monitor object to hold the - * additional pass count. - */ - -struct cdjpeg_progress_mgr { - struct jpeg_progress_mgr pub; /* fields known to JPEG library */ - int completed_extra_passes; /* extra passes completed */ - int total_extra_passes; /* total extra */ - /* last printed percentage stored here to avoid multiple printouts */ - int percent_done; -}; - -typedef struct cdjpeg_progress_mgr * cd_progress_ptr; - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jinit_read_bmp jIRdBMP -#define jinit_write_bmp jIWrBMP -#define jinit_read_gif jIRdGIF -#define jinit_write_gif jIWrGIF -#define jinit_read_ppm jIRdPPM -#define jinit_write_ppm jIWrPPM -#define jinit_read_rle jIRdRLE -#define jinit_write_rle jIWrRLE -#define jinit_read_targa jIRdTarga -#define jinit_write_targa jIWrTarga -#define read_quant_tables RdQTables -#define read_scan_script RdScnScript -#define set_quant_slots SetQSlots -#define set_sample_factors SetSFacts -#define read_color_map RdCMap -#define enable_signal_catcher EnSigCatcher -#define start_progress_monitor StProgMon -#define end_progress_monitor EnProgMon -#define read_stdin RdStdin -#define write_stdout WrStdout -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Module selection routines for I/O modules. */ - -EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, - boolean is_os2)); -EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); -EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); -EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); -EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); -EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); - -/* cjpeg support routines (in rdswitch.c) */ - -EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, - int scale_factor, boolean force_baseline)); -EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); -EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); -EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); - -/* djpeg support routines (in rdcolmap.c) */ - -EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); - -/* common support routines (in cdjpeg.c) */ - -EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); -EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, - cd_progress_ptr progress)); -EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); -EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); -EXTERN(FILE *) read_stdin JPP((void)); -EXTERN(FILE *) write_stdout JPP((void)); - -/* miscellaneous useful macros */ - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define WRITE_BINARY "w" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define WRITE_BINARY "wb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define WRITE_BINARY "wb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif -#ifndef EXIT_WARNING -#ifdef VMS -#define EXIT_WARNING 1 /* VMS is very nonstandard */ -#else -#define EXIT_WARNING 2 -#endif -#endif diff --git a/libjpegtwrp/change.log b/libjpegtwrp/change.log deleted file mode 100644 index 74102c0db..000000000 --- a/libjpegtwrp/change.log +++ /dev/null @@ -1,217 +0,0 @@ -CHANGE LOG for Independent JPEG Group's JPEG software - - -Version 6b 27-Mar-1998 ------------------------ - -jpegtran has new features for lossless image transformations (rotation -and flipping) as well as "lossless" reduction to grayscale. - -jpegtran now copies comments by default; it has a -copy switch to enable -copying all APPn blocks as well, or to suppress comments. (Formerly it -always suppressed comments and APPn blocks.) jpegtran now also preserves -JFIF version and resolution information. - -New decompressor library feature: COM and APPn markers found in the input -file can be saved in memory for later use by the application. (Before, -you had to code this up yourself with a custom marker processor.) - -There is an unused field "void * client_data" now in compress and decompress -parameter structs; this may be useful in some applications. - -JFIF version number information is now saved by the decoder and accepted by -the encoder. jpegtran uses this to copy the source file's version number, -to ensure "jpegtran -copy all" won't create bogus files that contain JFXX -extensions but claim to be version 1.01. Applications that generate their -own JFXX extension markers also (finally) have a supported way to cause the -encoder to emit JFIF version number 1.02. - -djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather -than as unknown APP0 markers. - -In -verbose mode, djpeg and rdjpgcom will try to print the contents of -APP12 markers as text. Some digital cameras store useful text information -in APP12 markers. - -Handling of truncated data streams is more robust: blocks beyond the one in -which the error occurs will be output as uniform gray, or left unchanged -if decoding a progressive JPEG. The appearance no longer depends on the -Huffman tables being used. - -Huffman tables are checked for validity much more carefully than before. - -To avoid the Unisys LZW patent, djpeg's GIF output capability has been -changed to produce "uncompressed GIFs", and cjpeg's GIF input capability -has been removed altogether. We're not happy about it either, but there -seems to be no good alternative. - -The configure script now supports building libjpeg as a shared library -on many flavors of Unix (all the ones that GNU libtool knows how to -build shared libraries for). Use "./configure --enable-shared" to -try this out. - -New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. -Also, a jconfig file and a build script for Metrowerks CodeWarrior -on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there -are miscellaneous other minor improvements in the makefiles. - -jmemmac.c now knows how to create temporary files following Mac System 7 -conventions. - -djpeg's -map switch is now able to read raw-format PPM files reliably. - -cjpeg -progressive -restart no longer generates any unnecessary DRI markers. - -Multiple calls to jpeg_simple_progression for a single JPEG object -no longer leak memory. - - -Version 6a 7-Feb-96 --------------------- - -Library initialization sequence modified to detect version mismatches -and struct field packing mismatches between library and calling application. -This change requires applications to be recompiled, but does not require -any application source code change. - -All routine declarations changed to the style "GLOBAL(type) name ...", -that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the -routine's return type as an argument. This makes it possible to add -Microsoft-style linkage keywords to all the routines by changing just -these macros. Note that any application code that was using these macros -will have to be changed. - -DCT coefficient quantization tables are now stored in normal array order -rather than zigzag order. Application code that calls jpeg_add_quant_table, -or otherwise manipulates quantization tables directly, will need to be -changed. If you need to make such code work with either older or newer -versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is -recommended. - -djpeg's trace capability now dumps DQT tables in natural order, not zigzag -order. This allows the trace output to be made into a "-qtables" file -more easily. - -New system-dependent memory manager module for use on Apple Macintosh. - -Fix bug in cjpeg's -smooth option: last one or two scanlines would be -duplicates of the prior line unless the image height mod 16 was 1 or 2. - -Repair minor problems in VMS, BCC, MC6 makefiles. - -New configure script based on latest GNU Autoconf. - -Correct the list of include files needed by MetroWerks C for ccommand(). - -Numerous small documentation updates. - - -Version 6 2-Aug-95 -------------------- - -Progressive JPEG support: library can read and write full progressive JPEG -files. A "buffered image" mode supports incremental decoding for on-the-fly -display of progressive images. Simply recompiling an existing IJG-v5-based -decoder with v6 should allow it to read progressive files, though of course -without any special progressive display. - -New "jpegtran" application performs lossless transcoding between different -JPEG formats; primarily, it can be used to convert baseline to progressive -JPEG and vice versa. In support of jpegtran, the library now allows lossless -reading and writing of JPEG files as DCT coefficient arrays. This ability -may be of use in other applications. - -Notes for programmers: -* We changed jpeg_start_decompress() to be able to suspend; this makes all -decoding modes available to suspending-input applications. However, -existing applications that use suspending input will need to be changed -to check the return value from jpeg_start_decompress(). You don't need to -do anything if you don't use a suspending data source. -* We changed the interface to the virtual array routines: access_virt_array -routines now take a count of the number of rows to access this time. The -last parameter to request_virt_array routines is now interpreted as the -maximum number of rows that may be accessed at once, but not necessarily -the height of every access. - - -Version 5b 15-Mar-95 ---------------------- - -Correct bugs with grayscale images having v_samp_factor > 1. - -jpeg_write_raw_data() now supports output suspension. - -Correct bugs in "configure" script for case of compiling in -a directory other than the one containing the source files. - -Repair bug in jquant1.c: sometimes didn't use as many colors as it could. - -Borland C makefile and jconfig file work under either MS-DOS or OS/2. - -Miscellaneous improvements to documentation. - - -Version 5a 7-Dec-94 --------------------- - -Changed color conversion roundoff behavior so that grayscale values are -represented exactly. (This causes test image files to change.) - -Make ordered dither use 16x16 instead of 4x4 pattern for a small quality -improvement. - -New configure script based on latest GNU Autoconf. -Fix configure script to handle CFLAGS correctly. -Rename *.auto files to *.cfg, so that configure script still works if -file names have been truncated for DOS. - -Fix bug in rdbmp.c: didn't allow for extra data between header and image. - -Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. - -Fix several bugs in rdrle.c. - -NEED_SHORT_EXTERNAL_NAMES option was broken. - -Revise jerror.h/jerror.c for more flexibility in message table. - -Repair oversight in jmemname.c NO_MKTEMP case: file could be there -but unreadable. - - -Version 5 24-Sep-94 --------------------- - -Version 5 represents a nearly complete redesign and rewrite of the IJG -software. Major user-visible changes include: - * Automatic configuration simplifies installation for most Unix systems. - * A range of speed vs. image quality tradeoffs are supported. - This includes resizing of an image during decompression: scaling down - by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. - * New programs rdjpgcom and wrjpgcom allow insertion and extraction - of text comments in a JPEG file. - -The application programmer's interface to the library has changed completely. -Notable improvements include: - * We have eliminated the use of callback routines for handling the - uncompressed image data. The application now sees the library as a - set of routines that it calls to read or write image data on a - scanline-by-scanline basis. - * The application image data is represented in a conventional interleaved- - pixel format, rather than as a separate array for each color channel. - This can save a copying step in many programs. - * The handling of compressed data has been cleaned up: the application can - supply routines to source or sink the compressed data. It is possible to - suspend processing on source/sink buffer overrun, although this is not - supported in all operating modes. - * All static state has been eliminated from the library, so that multiple - instances of compression or decompression can be active concurrently. - * JPEG abbreviated datastream formats are supported, ie, quantization and - Huffman tables can be stored separately from the image data. - * And not only that, but the documentation of the library has improved - considerably! - - -The last widely used release before the version 5 rewrite was version 4A of -18-Feb-93. Change logs before that point have been discarded, since they -are not of much interest after the rewrite. diff --git a/libjpegtwrp/cjpeg.1 b/libjpegtwrp/cjpeg.1 deleted file mode 100644 index d175a961c..000000000 --- a/libjpegtwrp/cjpeg.1 +++ /dev/null @@ -1,292 +0,0 @@ -.TH CJPEG 1 "20 March 1998" -.SH NAME -cjpeg \- compress an image file to a JPEG file -.SH SYNOPSIS -.B cjpeg -[ -.I options -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B cjpeg -compresses the named image file, or the standard input if no file is -named, and produces a JPEG/JFIF file on the standard output. -The currently supported input file formats are: PPM (PBMPLUS color -format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster -Toolkit format). (RLE is supported only if the URT library is available.) -.SH OPTIONS -All switch names may be abbreviated; for example, -.B \-grayscale -may be written -.B \-gray -or -.BR \-gr . -Most of the "basic" switches can be abbreviated to as little as one letter. -Upper and lower case are equivalent (thus -.B \-BMP -is the same as -.BR \-bmp ). -British spellings are also accepted (e.g., -.BR \-greyscale ), -though for brevity these are not mentioned below. -.PP -The basic switches are: -.TP -.BI \-quality " N" -Scale quantization tables to adjust image quality. Quality is 0 (worst) to -100 (best); default is 75. (See below for more info.) -.TP -.B \-grayscale -Create monochrome JPEG file from color input. Be sure to use this switch when -compressing a grayscale BMP file, because -.B cjpeg -isn't bright enough to notice whether a BMP file uses only shades of gray. -By saying -.BR \-grayscale , -you'll get a smaller JPEG file that takes less time to process. -.TP -.B \-optimize -Perform optimization of entropy encoding parameters. Without this, default -encoding parameters are used. -.B \-optimize -usually makes the JPEG file a little smaller, but -.B cjpeg -runs somewhat slower and needs much more memory. Image quality and speed of -decompression are unaffected by -.BR \-optimize . -.TP -.B \-progressive -Create progressive JPEG file (see below). -.TP -.B \-targa -Input file is Targa format. Targa files that contain an "identification" -field will not be automatically recognized by -.BR cjpeg ; -for such files you must specify -.B \-targa -to make -.B cjpeg -treat the input as Targa format. -For most Targa files, you won't need this switch. -.PP -The -.B \-quality -switch lets you trade off compressed file size against quality of the -reconstructed image: the higher the quality setting, the larger the JPEG file, -and the closer the output image will be to the original input. Normally you -want to use the lowest quality setting (smallest file) that decompresses into -something visually indistinguishable from the original image. For this -purpose the quality setting should be between 50 and 95; the default of 75 is -often about right. If you see defects at -.B \-quality -75, then go up 5 or 10 counts at a time until you are happy with the output -image. (The optimal setting will vary from one image to another.) -.PP -.B \-quality -100 will generate a quantization table of all 1's, minimizing loss in the -quantization step (but there is still information loss in subsampling, as well -as roundoff error). This setting is mainly of interest for experimental -purposes. Quality values above about 95 are -.B not -recommended for normal use; the compressed file size goes up dramatically for -hardly any gain in output image quality. -.PP -In the other direction, quality values below 50 will produce very small files -of low image quality. Settings around 5 to 10 might be useful in preparing an -index of a large image library, for example. Try -.B \-quality -2 (or so) for some amusing Cubist effects. (Note: quality -values below about 25 generate 2-byte quantization tables, which are -considered optional in the JPEG standard. -.B cjpeg -emits a warning message when you give such a quality value, because some -other JPEG programs may be unable to decode the resulting file. Use -.B \-baseline -if you need to ensure compatibility at low quality values.) -.PP -The -.B \-progressive -switch creates a "progressive JPEG" file. In this type of JPEG file, the data -is stored in multiple scans of increasing quality. If the file is being -transmitted over a slow communications link, the decoder can use the first -scan to display a low-quality image very quickly, and can then improve the -display with each subsequent scan. The final image is exactly equivalent to a -standard JPEG file of the same quality setting, and the total file size is -about the same --- often a little smaller. -.B Caution: -progressive JPEG is not yet widely implemented, so many decoders will be -unable to view a progressive JPEG file at all. -.PP -Switches for advanced users: -.TP -.B \-dct int -Use integer DCT method (default). -.TP -.B \-dct fast -Use fast integer DCT (less accurate). -.TP -.B \-dct float -Use floating-point DCT method. -The float method is very slightly more accurate than the int method, but is -much slower unless your machine has very fast floating-point hardware. Also -note that results of the floating-point method may vary slightly across -machines, while the integer methods should give the same results everywhere. -The fast integer method is much less accurate than the other two. -.TP -.BI \-restart " N" -Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is -attached to the number. -.B \-restart 0 -(the default) means no restart markers. -.TP -.BI \-smooth " N" -Smooth the input image to eliminate dithering noise. N, ranging from 1 to -100, indicates the strength of smoothing. 0 (the default) means no smoothing. -.TP -.BI \-maxmemory " N" -Set limit for amount of memory to use in processing large images. Value is -in thousands of bytes, or millions of bytes if "M" is attached to the -number. For example, -.B \-max 4m -selects 4000000 bytes. If more space is needed, temporary files will be used. -.TP -.BI \-outfile " name" -Send output image to the named file, not to standard output. -.TP -.B \-verbose -Enable debug printout. More -.BR \-v 's -give more output. Also, version information is printed at startup. -.TP -.B \-debug -Same as -.BR \-verbose . -.PP -The -.B \-restart -option inserts extra markers that allow a JPEG decoder to resynchronize after -a transmission error. Without restart markers, any damage to a compressed -file will usually ruin the image from the point of the error to the end of the -image; with restart markers, the damage is usually confined to the portion of -the image up to the next restart marker. Of course, the restart markers -occupy extra space. We recommend -.B \-restart 1 -for images that will be transmitted across unreliable networks such as Usenet. -.PP -The -.B \-smooth -option filters the input to eliminate fine-scale noise. This is often useful -when converting dithered images to JPEG: a moderate smoothing factor of 10 to -50 gets rid of dithering patterns in the input file, resulting in a smaller -JPEG file and a better-looking image. Too large a smoothing factor will -visibly blur the image, however. -.PP -Switches for wizards: -.TP -.B \-baseline -Force baseline-compatible quantization tables to be generated. This clamps -quantization values to 8 bits even at low quality settings. (This switch is -poorly named, since it does not ensure that the output is actually baseline -JPEG. For example, you can use -.B \-baseline -and -.B \-progressive -together.) -.TP -.BI \-qtables " file" -Use the quantization tables given in the specified text file. -.TP -.BI \-qslots " N[,...]" -Select which quantization table to use for each color component. -.TP -.BI \-sample " HxV[,...]" -Set JPEG sampling factors for each color component. -.TP -.BI \-scans " file" -Use the scan script given in the specified text file. -.PP -The "wizard" switches are intended for experimentation with JPEG. If you -don't know what you are doing, \fBdon't use them\fR. These switches are -documented further in the file wizard.doc. -.SH EXAMPLES -.LP -This example compresses the PPM file foo.ppm with a quality factor of -60 and saves the output as foo.jpg: -.IP -.B cjpeg \-quality -.I 60 foo.ppm -.B > -.I foo.jpg -.SH HINTS -Color GIF files are not the ideal input for JPEG; JPEG is really intended for -compressing full-color (24-bit) images. In particular, don't try to convert -cartoons, line drawings, and other images that have only a few distinct -colors. GIF works great on these, JPEG does not. If you want to convert a -GIF to JPEG, you should experiment with -.BR cjpeg 's -.B \-quality -and -.B \-smooth -options to get a satisfactory conversion. -.B \-smooth 10 -or so is often helpful. -.PP -Avoid running an image through a series of JPEG compression/decompression -cycles. Image quality loss will accumulate; after ten or so cycles the image -may be noticeably worse than it was after one cycle. It's best to use a -lossless format while manipulating an image, then convert to JPEG format when -you are ready to file the image away. -.PP -The -.B \-optimize -option to -.B cjpeg -is worth using when you are making a "final" version for posting or archiving. -It's also a win when you are using low quality settings to make very small -JPEG files; the percentage improvement is often a lot more than it is on -larger files. (At present, -.B \-optimize -mode is always selected when generating progressive JPEG files.) -.SH ENVIRONMENT -.TP -.B JPEGMEM -If this environment variable is set, its value is the default memory limit. -The value is specified as described for the -.B \-maxmemory -switch. -.B JPEGMEM -overrides the default value specified when the program was compiled, and -itself is overridden by an explicit -.BR \-maxmemory . -.SH SEE ALSO -.BR djpeg (1), -.BR jpegtran (1), -.BR rdjpgcom (1), -.BR wrjpgcom (1) -.br -.BR ppm (5), -.BR pgm (5) -.br -Wallace, Gregory K. "The JPEG Still Picture Compression Standard", -Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. -.SH AUTHOR -Independent JPEG Group -.SH BUGS -Arithmetic coding is not supported for legal reasons. -.PP -GIF input files are no longer supported, to avoid the Unisys LZW patent. -Use a Unisys-licensed program if you need to read a GIF file. (Conversion -of GIF files to JPEG is usually a bad idea anyway.) -.PP -Not all variants of BMP and Targa file formats are supported. -.PP -The -.B \-targa -switch is not a bug, it's a feature. (It would be a bug if the Targa format -designers had not been clueless.) -.PP -Still not as fast as we'd like. diff --git a/libjpegtwrp/cjpeg.c b/libjpegtwrp/cjpeg.c deleted file mode 100644 index f2a929f0c..000000000 --- a/libjpegtwrp/cjpeg.c +++ /dev/null @@ -1,606 +0,0 @@ -/* - * cjpeg.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for the JPEG compressor. - * It should work on any system with Unix- or MS-DOS-style command lines. - * - * Two different command line styles are permitted, depending on the - * compile-time switch TWO_FILE_COMMANDLINE: - * cjpeg [options] inputfile outputfile - * cjpeg [options] [inputfile] - * In the second style, output is always to standard output, which you'd - * normally redirect to a file or pipe to some other program. Input is - * either from a named file or from standard input (typically redirected). - * The second style is convenient on Unix but is unhelpful on systems that - * don't support pipes. Also, you MUST use the first style if your system - * doesn't do binary I/O to stdin/stdout. - * To simplify script writing, the "-outfile" switch is provided. The syntax - * cjpeg [options] -outfile outputfile inputfile - * works regardless of which command line style is used. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "jversion.h" /* for version message */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* Create the add-on message string table. */ - -#define JMESSAGE(code,string) string , - -static const char * const cdjpeg_message_table[] = { -#include "cderror.h" - NULL -}; - - -/* - * This routine determines what format the input file is, - * and selects the appropriate input-reading module. - * - * To determine which family of input formats the file belongs to, - * we may look only at the first byte of the file, since C does not - * guarantee that more than one character can be pushed back with ungetc. - * Looking at additional bytes would require one of these approaches: - * 1) assume we can fseek() the input file (fails for piped input); - * 2) assume we can push back more than one character (works in - * some C implementations, but unportable); - * 3) provide our own buffering (breaks input readers that want to use - * stdio directly, such as the RLE library); - * or 4) don't put back the data, and modify the input_init methods to assume - * they start reading after the start of file (also breaks RLE library). - * #1 is attractive for MS-DOS but is untenable on Unix. - * - * The most portable solution for file types that can't be identified by their - * first byte is to make the user tell us what they are. This is also the - * only approach for "raw" file types that contain only arbitrary values. - * We presently apply this method for Targa files. Most of the time Targa - * files start with 0x00, so we recognize that case. Potentially, however, - * a Targa file could start with any byte value (byte 0 is the length of the - * seldom-used ID field), so we provide a switch to force Targa input mode. - */ - -static boolean is_targa; /* records user -targa switch */ - - -LOCAL(cjpeg_source_ptr) -select_file_type (j_compress_ptr cinfo, FILE * infile) -{ - int c; - - if (is_targa) { -#ifdef TARGA_SUPPORTED - return jinit_read_targa(cinfo); -#else - ERREXIT(cinfo, JERR_TGA_NOTCOMP); -#endif - } - - if ((c = getc(infile)) == EOF) - ERREXIT(cinfo, JERR_INPUT_EMPTY); - if (ungetc(c, infile) == EOF) - ERREXIT(cinfo, JERR_UNGETC_FAILED); - - switch (c) { -#ifdef BMP_SUPPORTED - case 'B': - return jinit_read_bmp(cinfo); -#endif -#ifdef GIF_SUPPORTED - case 'G': - return jinit_read_gif(cinfo); -#endif -#ifdef PPM_SUPPORTED - case 'P': - return jinit_read_ppm(cinfo); -#endif -#ifdef RLE_SUPPORTED - case 'R': - return jinit_read_rle(cinfo); -#endif -#ifdef TARGA_SUPPORTED - case 0x00: - return jinit_read_targa(cinfo); -#endif - default: - ERREXIT(cinfo, JERR_UNKNOWN_FORMAT); - break; - } - - return NULL; /* suppress compiler warnings */ -} - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ - - -LOCAL(void) -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -quality N Compression quality (0..100; 5-95 is useful range)\n"); - fprintf(stderr, " -grayscale Create monochrome JPEG file\n"); -#ifdef ENTROPY_OPT_SUPPORTED - fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); -#endif -#ifdef C_PROGRESSIVE_SUPPORTED - fprintf(stderr, " -progressive Create progressive JPEG file\n"); -#endif -#ifdef TARGA_SUPPORTED - fprintf(stderr, " -targa Input file is Targa format (usually not needed)\n"); -#endif - fprintf(stderr, "Switches for advanced users:\n"); -#ifdef DCT_ISLOW_SUPPORTED - fprintf(stderr, " -dct int Use integer DCT method%s\n", - (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); -#endif -#ifdef DCT_IFAST_SUPPORTED - fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", - (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); -#endif -#ifdef DCT_FLOAT_SUPPORTED - fprintf(stderr, " -dct float Use floating-point DCT method%s\n", - (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); -#endif - fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); -#ifdef INPUT_SMOOTHING_SUPPORTED - fprintf(stderr, " -smooth N Smooth dithered input (N=1..100 is strength)\n"); -#endif - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - fprintf(stderr, "Switches for wizards:\n"); -#ifdef C_ARITH_CODING_SUPPORTED - fprintf(stderr, " -arithmetic Use arithmetic coding\n"); -#endif - fprintf(stderr, " -baseline Force baseline quantization tables\n"); - fprintf(stderr, " -qtables file Use quantization tables given in file\n"); - fprintf(stderr, " -qslots N[,...] Set component quantization tables\n"); - fprintf(stderr, " -sample HxV[,...] Set component sampling factors\n"); -#ifdef C_MULTISCAN_FILES_SUPPORTED - fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); -#endif - exit(EXIT_FAILURE); -} - - -LOCAL(int) -parse_switches (j_compress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - int quality; /* -quality parameter */ - int q_scale_factor; /* scaling percentage for -qtables */ - boolean force_baseline; - boolean simple_progressive; - char * qtablefile = NULL; /* saves -qtables filename if any */ - char * qslotsarg = NULL; /* saves -qslots parm if any */ - char * samplearg = NULL; /* saves -sample parm if any */ - char * scansarg = NULL; /* saves -scans parm if any */ - - /* Set up default JPEG parameters. */ - /* Note that default -quality level need not, and does not, - * match the default scaling for an explicit -qtables argument. - */ - quality = 75; /* default -quality value */ - q_scale_factor = 100; /* default to no scaling for -qtables */ - force_baseline = FALSE; /* by default, allow 16-bit quantizers */ - simple_progressive = FALSE; - is_targa = FALSE; - outfilename = NULL; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "arithmetic", 1)) { - /* Use arithmetic coding. */ -#ifdef C_ARITH_CODING_SUPPORTED - cinfo->arith_code = TRUE; -#else - fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "baseline", 1)) { - /* Force baseline-compatible output (8-bit quantizer values). */ - force_baseline = TRUE; - - } else if (keymatch(arg, "dct", 2)) { - /* Select DCT algorithm. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "int", 1)) { - cinfo->dct_method = JDCT_ISLOW; - } else if (keymatch(argv[argn], "fast", 2)) { - cinfo->dct_method = JDCT_IFAST; - } else if (keymatch(argv[argn], "float", 2)) { - cinfo->dct_method = JDCT_FLOAT; - } else - usage(); - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { - /* Force a monochrome JPEG file to be generated. */ - jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { - /* Enable entropy parm optimization. */ -#ifdef ENTROPY_OPT_SUPPORTED - cinfo->optimize_coding = TRUE; -#else - fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "progressive", 1)) { - /* Select simple progressive mode. */ -#ifdef C_PROGRESSIVE_SUPPORTED - simple_progressive = TRUE; - /* We must postpone execution until num_components is known. */ -#else - fprintf(stderr, "%s: sorry, progressive output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "quality", 1)) { - /* Quality factor (quantization table scaling factor). */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d", &quality) != 1) - usage(); - /* Change scale factor in case -qtables is present. */ - q_scale_factor = jpeg_quality_scaling(quality); - - } else if (keymatch(arg, "qslots", 2)) { - /* Quantization table slot numbers. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - qslotsarg = argv[argn]; - /* Must delay setting qslots until after we have processed any - * colorspace-determining switches, since jpeg_set_colorspace sets - * default quant table numbers. - */ - - } else if (keymatch(arg, "qtables", 2)) { - /* Quantization tables fetched from file. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - qtablefile = argv[argn]; - /* We postpone actually reading the file in case -quality comes later. */ - - } else if (keymatch(arg, "restart", 1)) { - /* Restart interval in MCU rows (or in MCUs with 'b'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (lval < 0 || lval > 65535L) - usage(); - if (ch == 'b' || ch == 'B') { - cinfo->restart_interval = (unsigned int) lval; - cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ - } else { - cinfo->restart_in_rows = (int) lval; - /* restart_interval will be computed during startup */ - } - - } else if (keymatch(arg, "sample", 2)) { - /* Set sampling factors. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - samplearg = argv[argn]; - /* Must delay setting sample factors until after we have processed any - * colorspace-determining switches, since jpeg_set_colorspace sets - * default sampling factors. - */ - - } else if (keymatch(arg, "scans", 2)) { - /* Set scan script. */ -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (++argn >= argc) /* advance to next argument */ - usage(); - scansarg = argv[argn]; - /* We must postpone reading the file in case -progressive appears. */ -#else - fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "smooth", 2)) { - /* Set input smoothing factor. */ - int val; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d", &val) != 1) - usage(); - if (val < 0 || val > 100) - usage(); - cinfo->smoothing_factor = val; - - } else if (keymatch(arg, "targa", 1)) { - /* Input file is Targa format. */ - is_targa = TRUE; - - } else { - usage(); /* bogus switch */ - } - } - - /* Post-switch-scanning cleanup */ - - if (for_real) { - - /* Set quantization tables for selected quality. */ - /* Some or all may be overridden if -qtables is present. */ - jpeg_set_quality(cinfo, quality, force_baseline); - - if (qtablefile != NULL) /* process -qtables if it was present */ - if (! read_quant_tables(cinfo, qtablefile, - q_scale_factor, force_baseline)) - usage(); - - if (qslotsarg != NULL) /* process -qslots if it was present */ - if (! set_quant_slots(cinfo, qslotsarg)) - usage(); - - if (samplearg != NULL) /* process -sample if it was present */ - if (! set_sample_factors(cinfo, samplearg)) - usage(); - -#ifdef C_PROGRESSIVE_SUPPORTED - if (simple_progressive) /* process -progressive; -scans can override */ - jpeg_simple_progression(cinfo); -#endif - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (scansarg != NULL) /* process -scans if it was present */ - if (! read_scan_script(cinfo, scansarg)) - usage(); -#endif - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - struct jpeg_compress_struct cinfo; - struct jpeg_error_mgr jerr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - int file_index; - cjpeg_source_ptr src_mgr; - FILE * input_file; - FILE * output_file; - JDIMENSION num_scanlines; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "cjpeg"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG compression object with default error handling. */ - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_compress(&cinfo); - /* Add some application-specific error messages (from cderror.h) */ - jerr.addon_message_table = cdjpeg_message_table; - jerr.first_addon_message = JMSG_FIRSTADDONCODE; - jerr.last_addon_message = JMSG_LASTADDONCODE; - - /* Now safe to enable signal catcher. */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &cinfo); -#endif - - /* Initialize JPEG parameters. - * Much of this may be overridden later. - * In particular, we don't yet know the input file's color space, - * but we need to provide some value for jpeg_set_defaults() to work. - */ - - cinfo.in_color_space = JCS_RGB; /* arbitrary guess */ - jpeg_set_defaults(&cinfo); - - /* Scan command line to find file names. - * It is convenient to use just one switch-parsing routine, but the switch - * values read here are ignored; we will rescan the switches after opening - * the input file. - */ - - file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &cinfo, &progress); -#endif - - /* Figure out the input file format, and set up to read it. */ - src_mgr = select_file_type(&cinfo, input_file); - src_mgr->input_file = input_file; - - /* Read the input file header to obtain file size & colorspace. */ - (*src_mgr->start_input) (&cinfo, src_mgr); - - /* Now that we know input colorspace, fix colorspace-dependent defaults */ - jpeg_default_colorspace(&cinfo); - - /* Adjust default compression parameters by re-parsing the options */ - file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); - - /* Specify data destination for compression */ - jpeg_stdio_dest(&cinfo, output_file); - - /* Start compressor */ - jpeg_start_compress(&cinfo, TRUE); - - /* Process data */ - while (cinfo.next_scanline < cinfo.image_height) { - num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr); - (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines); - } - - /* Finish compression and release memory */ - (*src_mgr->finish_input) (&cinfo, src_mgr); - jpeg_finish_compress(&cinfo); - jpeg_destroy_compress(&cinfo); - - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &cinfo); -#endif - - /* All done. */ - exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/libjpegtwrp/ckconfig.c b/libjpegtwrp/ckconfig.c deleted file mode 100644 index 34baf795b..000000000 --- a/libjpegtwrp/ckconfig.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - * ckconfig.c - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - */ - -/* - * This program is intended to help you determine how to configure the JPEG - * software for installation on a particular system. The idea is to try to - * compile and execute this program. If your compiler fails to compile the - * program, make changes as indicated in the comments below. Once you can - * compile the program, run it, and it will produce a "jconfig.h" file for - * your system. - * - * As a general rule, each time you try to compile this program, - * pay attention only to the *first* error message you get from the compiler. - * Many C compilers will issue lots of spurious error messages once they - * have gotten confused. Go to the line indicated in the first error message, - * and read the comments preceding that line to see what to change. - * - * Almost all of the edits you may need to make to this program consist of - * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL", - * or vice versa. This is called defining or undefining that symbol. - */ - - -/* First we must see if your system has the include files we need. - * We start out with the assumption that your system has all the ANSI-standard - * include files. If you get any error trying to include one of these files, - * undefine the corresponding HAVE_xxx symbol. - */ - -#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */ -#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */ -#include -#endif - -#define HAVE_STDLIB_H /* same thing for stdlib.h */ -#ifdef HAVE_STDLIB_H -#include -#endif - -#include /* If you ain't got this, you ain't got C. */ - -/* We have to see if your string functions are defined by - * strings.h (old BSD convention) or string.h (everybody else). - * We try the non-BSD convention first; define NEED_BSD_STRINGS - * if the compiler says it can't find string.h. - */ - -#undef NEED_BSD_STRINGS - -#ifdef NEED_BSD_STRINGS -#include -#else -#include -#endif - -/* On some systems (especially older Unix machines), type size_t is - * defined only in the include file . If you get a failure - * on the size_t test below, try defining NEED_SYS_TYPES_H. - */ - -#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */ -#ifdef NEED_SYS_TYPES_H -#include -#endif - - -/* Usually type size_t is defined in one of the include files we've included - * above. If not, you'll get an error on the "typedef size_t my_size_t;" line. - * In that case, first try defining NEED_SYS_TYPES_H just above. - * If that doesn't work, you'll have to search through your system library - * to figure out which include file defines "size_t". Look for a line that - * says "typedef something-or-other size_t;". Then, change the line below - * that says "#include " to instead include the file - * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find - * type size_t anywhere, try replacing "#include " with - * "typedef unsigned int size_t;". - */ - -#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */ - -#ifdef NEED_SPECIAL_INCLUDE -#include -#endif - -typedef size_t my_size_t; /* The payoff: do we have size_t now? */ - - -/* The next question is whether your compiler supports ANSI-style function - * prototypes. You need to know this in order to choose between using - * makefile.ansi and using makefile.unix. - * The #define line below is set to assume you have ANSI function prototypes. - * If you get an error in this group of lines, undefine HAVE_PROTOTYPES. - */ - -#define HAVE_PROTOTYPES - -#ifdef HAVE_PROTOTYPES -int testfunction (int arg1, int * arg2); /* check prototypes */ - -struct methods_struct { /* check method-pointer declarations */ - int (*error_exit) (char *msgtext); - int (*trace_message) (char *msgtext); - int (*another_method) (void); -}; - -int testfunction (int arg1, int * arg2) /* check definitions */ -{ - return arg2[arg1]; -} - -int test2function (void) /* check void arg list */ -{ - return 0; -} -#endif - - -/* Now we want to find out if your compiler knows what "unsigned char" means. - * If you get an error on the "unsigned char un_char;" line, - * then undefine HAVE_UNSIGNED_CHAR. - */ - -#define HAVE_UNSIGNED_CHAR - -#ifdef HAVE_UNSIGNED_CHAR -unsigned char un_char; -#endif - - -/* Now we want to find out if your compiler knows what "unsigned short" means. - * If you get an error on the "unsigned short un_short;" line, - * then undefine HAVE_UNSIGNED_SHORT. - */ - -#define HAVE_UNSIGNED_SHORT - -#ifdef HAVE_UNSIGNED_SHORT -unsigned short un_short; -#endif - - -/* Now we want to find out if your compiler understands type "void". - * If you get an error anywhere in here, undefine HAVE_VOID. - */ - -#define HAVE_VOID - -#ifdef HAVE_VOID -/* Caution: a C++ compiler will insist on complete prototypes */ -typedef void * void_ptr; /* check void * */ -#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ -typedef void (*void_func) (int a, int b); -#else -typedef void (*void_func) (); -#endif - -#ifdef HAVE_PROTOTYPES /* check void function result */ -void test3function (void_ptr arg1, void_func arg2) -#else -void test3function (arg1, arg2) - void_ptr arg1; - void_func arg2; -#endif -{ - char * locptr = (char *) arg1; /* check casting to and from void * */ - arg1 = (void *) locptr; - (*arg2) (1, 2); /* check call of fcn returning void */ -} -#endif - - -/* Now we want to find out if your compiler knows what "const" means. - * If you get an error here, undefine HAVE_CONST. - */ - -#define HAVE_CONST - -#ifdef HAVE_CONST -static const int carray[3] = {1, 2, 3}; - -#ifdef HAVE_PROTOTYPES -int test4function (const int arg1) -#else -int test4function (arg1) - const int arg1; -#endif -{ - return carray[arg1]; -} -#endif - - -/* If you get an error or warning about this structure definition, - * define INCOMPLETE_TYPES_BROKEN. - */ - -#undef INCOMPLETE_TYPES_BROKEN - -#ifndef INCOMPLETE_TYPES_BROKEN -typedef struct undefined_structure * undef_struct_ptr; -#endif - - -/* If you get an error about duplicate names, - * define NEED_SHORT_EXTERNAL_NAMES. - */ - -#undef NEED_SHORT_EXTERNAL_NAMES - -#ifndef NEED_SHORT_EXTERNAL_NAMES - -int possibly_duplicate_function () -{ - return 0; -} - -int possibly_dupli_function () -{ - return 1; -} - -#endif - - - -/************************************************************************ - * OK, that's it. You should not have to change anything beyond this - * point in order to compile and execute this program. (You might get - * some warnings, but you can ignore them.) - * When you run the program, it will make a couple more tests that it - * can do automatically, and then it will create jconfig.h and print out - * any additional suggestions it has. - ************************************************************************ - */ - - -#ifdef HAVE_PROTOTYPES -int is_char_signed (int arg) -#else -int is_char_signed (arg) - int arg; -#endif -{ - if (arg == 189) { /* expected result for unsigned char */ - return 0; /* type char is unsigned */ - } - else if (arg != -67) { /* expected result for signed char */ - printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - } - return 1; /* assume char is signed otherwise */ -} - - -#ifdef HAVE_PROTOTYPES -int is_shifting_signed (long arg) -#else -int is_shifting_signed (arg) - long arg; -#endif -/* See whether right-shift on a long is signed or not. */ -{ - long res = arg >> 4; - - if (res == -0x7F7E80CL) { /* expected result for signed shift */ - return 1; /* right shift is signed */ - } - /* see if unsigned-shift hack will fix it. */ - /* we can't just test exact value since it depends on width of long... */ - res |= (~0L) << (32-4); - if (res == -0x7F7E80CL) { /* expected result now? */ - return 0; /* right shift is unsigned */ - } - printf("Right shift isn't acting as I expect it to.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - return 0; /* try it with unsigned anyway */ -} - - -#ifdef HAVE_PROTOTYPES -int main (int argc, char ** argv) -#else -int main (argc, argv) - int argc; - char ** argv; -#endif -{ - char signed_char_check = (char) (-67); - FILE *outfile; - - /* Attempt to write jconfig.h */ - if ((outfile = fopen("jconfig.h", "w")) == NULL) { - printf("Failed to write jconfig.h\n"); - return 1; - } - - /* Write out all the info */ - fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n"); - fprintf(outfile, "/* see jconfig.doc for explanations */\n\n"); -#ifdef HAVE_PROTOTYPES - fprintf(outfile, "#define HAVE_PROTOTYPES\n"); -#else - fprintf(outfile, "#undef HAVE_PROTOTYPES\n"); -#endif -#ifdef HAVE_UNSIGNED_CHAR - fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n"); -#else - fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n"); -#endif -#ifdef HAVE_UNSIGNED_SHORT - fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n"); -#else - fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n"); -#endif -#ifdef HAVE_VOID - fprintf(outfile, "/* #define void char */\n"); -#else - fprintf(outfile, "#define void char\n"); -#endif -#ifdef HAVE_CONST - fprintf(outfile, "/* #define const */\n"); -#else - fprintf(outfile, "#define const\n"); -#endif - if (is_char_signed((int) signed_char_check)) - fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n"); - else - fprintf(outfile, "#define CHAR_IS_UNSIGNED\n"); -#ifdef HAVE_STDDEF_H - fprintf(outfile, "#define HAVE_STDDEF_H\n"); -#else - fprintf(outfile, "#undef HAVE_STDDEF_H\n"); -#endif -#ifdef HAVE_STDLIB_H - fprintf(outfile, "#define HAVE_STDLIB_H\n"); -#else - fprintf(outfile, "#undef HAVE_STDLIB_H\n"); -#endif -#ifdef NEED_BSD_STRINGS - fprintf(outfile, "#define NEED_BSD_STRINGS\n"); -#else - fprintf(outfile, "#undef NEED_BSD_STRINGS\n"); -#endif -#ifdef NEED_SYS_TYPES_H - fprintf(outfile, "#define NEED_SYS_TYPES_H\n"); -#else - fprintf(outfile, "#undef NEED_SYS_TYPES_H\n"); -#endif - fprintf(outfile, "#undef NEED_FAR_POINTERS\n"); -#ifdef NEED_SHORT_EXTERNAL_NAMES - fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n"); -#else - fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n"); -#endif -#ifdef INCOMPLETE_TYPES_BROKEN - fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n"); -#else - fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n"); -#endif - fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n"); - if (is_shifting_signed(-0x7F7E80B1L)) - fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n"); - else - fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n"); - fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n"); - fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n"); - fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n"); - fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n"); - fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n"); - fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n"); - fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n"); - fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n"); - fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n"); - fprintf(outfile, "#undef DONT_USE_B_MODE\n"); - fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n"); - fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n"); - - /* Close the jconfig.h file */ - fclose(outfile); - - /* User report */ - printf("Configuration check for Independent JPEG Group's software done.\n"); - printf("\nI have written the jconfig.h file for you.\n\n"); -#ifdef HAVE_PROTOTYPES - printf("You should use makefile.ansi as the starting point for your Makefile.\n"); -#else - printf("You should use makefile.unix as the starting point for your Makefile.\n"); -#endif - -#ifdef NEED_SPECIAL_INCLUDE - printf("\nYou'll need to change jconfig.h to include the system include file\n"); - printf("that you found type size_t in, or add a direct definition of type\n"); - printf("size_t if that's what you used. Just add it to the end.\n"); -#endif - - return 0; -} diff --git a/libjpegtwrp/coderules.doc b/libjpegtwrp/coderules.doc deleted file mode 100644 index 0ab5d9bd3..000000000 --- a/libjpegtwrp/coderules.doc +++ /dev/null @@ -1,118 +0,0 @@ -IJG JPEG LIBRARY: CODING RULES - -Copyright (C) 1991-1996, Thomas G. Lane. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -Since numerous people will be contributing code and bug fixes, it's important -to establish a common coding style. The goal of using similar coding styles -is much more important than the details of just what that style is. - -In general we follow the recommendations of "Recommended C Style and Coding -Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and -Brader). This document is available in the IJG FTP archive (see -jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl). - -Block comments should be laid out thusly: - -/* - * Block comments in this style. - */ - -We indent statements in K&R style, e.g., - if (test) { - then-part; - } else { - else-part; - } -with two spaces per indentation level. (This indentation convention is -handled automatically by GNU Emacs and many other text editors.) - -Multi-word names should be written in lower case with underscores, e.g., -multi_word_name (not multiWordName). Preprocessor symbols and enum constants -are similar but upper case (MULTI_WORD_NAME). Names should be unique within -the first fifteen characters. (On some older systems, global names must be -unique within six characters. We accommodate this without cluttering the -source code by using macros to substitute shorter names.) - -We use function prototypes everywhere; we rely on automatic source code -transformation to feed prototype-less C compilers. Transformation is done -by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript). -ansi2knr is not very bright, so it imposes a format requirement on function -declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions -should be written in the following style: - -LOCAL(int *) -function_name (int a, char *b) -{ - code... -} - -Note that each function definition must begin with GLOBAL(type), LOCAL(type), -or METHODDEF(type). These macros expand to "static type" or just "type" as -appropriate. They provide a readable indication of the routine's usage and -can readily be changed for special needs. (For instance, special linkage -keywords can be inserted for use in Windows DLLs.) - -ansi2knr does not transform method declarations (function pointers in -structs). We handle these with a macro JMETHOD, defined as - #ifdef HAVE_PROTOTYPES - #define JMETHOD(type,methodname,arglist) type (*methodname) arglist - #else - #define JMETHOD(type,methodname,arglist) type (*methodname) () - #endif -which is used like this: - struct function_pointers { - JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp)); - JMETHOD(void, term_entropy_encoder, (void)); - }; -Note the set of parentheses surrounding the parameter list. - -A similar solution is used for forward and external function declarations -(see the EXTERN and JPP macros). - -If the code is to work on non-ANSI compilers, we cannot rely on a prototype -declaration to coerce actual parameters into the right types. Therefore, use -explicit casts on actual parameters whenever the actual parameter type is not -identical to the formal parameter. Beware of implicit conversions to "int". - -It seems there are some non-ANSI compilers in which the sizeof() operator -is defined to return int, yet size_t is defined as long. Needless to say, -this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(), -so that the result is guaranteed to be of type size_t. - - -The JPEG library is intended to be used within larger programs. Furthermore, -we want it to be reentrant so that it can be used by applications that process -multiple images concurrently. The following rules support these requirements: - -1. Avoid direct use of file I/O, "malloc", error report printouts, etc; -pass these through the common routines provided. - -2. Minimize global namespace pollution. Functions should be declared static -wherever possible. (Note that our method-based calling conventions help this -a lot: in many modules only the initialization function will ever need to be -called directly, so only that function need be externally visible.) All -global function names should begin with "jpeg_", and should have an -abbreviated name (unique in the first six characters) substituted by macro -when NEED_SHORT_EXTERNAL_NAMES is set. - -3. Don't use global variables; anything that must be used in another module -should be in the common data structures. - -4. Don't use static variables except for read-only constant tables. Variables -that should be private to a module can be placed into private structures (see -the system architecture document, structure.doc). - -5. Source file names should begin with "j" for files that are part of the -library proper; source files that are not part of the library, such as cjpeg.c -and djpeg.c, do not begin with "j". Keep source file names to eight -characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep -compression and decompression code in separate source files --- some -applications may want only one half of the library. - -Note: these rules (particularly #4) are not followed religiously in the -modules that are used in cjpeg/djpeg but are not part of the JPEG library -proper. Those modules are not really intended to be used in other -applications. diff --git a/libjpegtwrp/config.guess b/libjpegtwrp/config.guess deleted file mode 100755 index 413ed41c0..000000000 --- a/libjpegtwrp/config.guess +++ /dev/null @@ -1,883 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Written by Per Bothner . -# The master version of this file is at the FSF in /home/gd/gnu/lib. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit system type (host/target name). -# -# Only a few systems have been added to this list; please add others -# (but try to keep the structure clean). -# - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 8/24/94.) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - cat <dummy.s - .globl main - .ent main -main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 - .end main -EOF - ${CC-cc} dummy.s -o dummy 2>/dev/null - if test "$?" = 0 ; then - ./dummy - case "$?" in - 7) - UNAME_MACHINE="alpha" - ;; - 15) - UNAME_MACHINE="alphaev5" - ;; - 14) - UNAME_MACHINE="alphaev56" - ;; - 10) - UNAME_MACHINE="alphapca56" - ;; - 16) - UNAME_MACHINE="alphaev6" - ;; - esac - fi - rm -f dummy.s dummy - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]` - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-cbm-sysv4 - exit 0;; - amiga:NetBSD:*:*) - echo m68k-cbm-netbsd${UNAME_RELEASE} - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc64:OpenBSD:*:*) - echo mips64el-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hkmips:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - arm32:NetBSD:*:*) - echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - SR2?01:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:*|MIS*:OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - atari*:NetBSD:*:*) - echo m68k-atari-netbsd${UNAME_RELEASE} - exit 0 ;; - atari*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3*:NetBSD:*:*) - echo m68k-sun-netbsd${UNAME_RELEASE} - exit 0 ;; - sun3*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:NetBSD:*:*) - echo m68k-apple-netbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - sed 's/^ //' << EOF >dummy.c - int main (argc, argv) int argc; char **argv; { - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - ${CC-cc} dummy.c -o dummy \ - && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ - -o ${TARGET_BINARY_INTERFACE}x = x ] ; then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i?86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - sed 's/^ //' << EOF >dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:4) - if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=4.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[3478]??:HP-UX:*:*) - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;; - 9000/8?? ) HP_ARCH=hppa1.0 ;; - esac - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - sed 's/^ //' << EOF >dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i?86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*X-MP:*:*:*) - echo xmp-cray-unicos - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY-2:*:*:*) - echo cray2-cray-unicos - exit 0 ;; - F300:UNIX_System_V:*:*) - FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - F301:UNIX_System_V:*:*) - echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` - exit 0 ;; - hp3[0-9][05]:NetBSD:*:*) - echo m68k-hp-netbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - i?86:BSD/386:*:* | *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - *:NetBSD:*:*) - echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - i*:CYGWIN*:*) - echo i386-pc-cygwin32 - exit 0 ;; - i*:MINGW*:*) - echo i386-pc-mingw32 - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin32 - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - *:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. - ld_help_string=`ld --help 2>&1` - ld_supported_emulations=`echo $ld_help_string \ - | sed -ne '/supported emulations:/!d - s/[ ][ ]*/ /g - s/.*supported emulations: *// - s/ .*// - p'` - case "$ld_supported_emulations" in - i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;; - i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;; - sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; - elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;; - esac - - if test "${UNAME_MACHINE}" = "alpha" ; then - sed 's/^ //' <dummy.s - .globl main - .ent main - main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 - .end main -EOF - LIBC="" - ${CC-cc} dummy.s -o dummy 2>/dev/null - if test "$?" = 0 ; then - ./dummy - case "$?" in - 7) - UNAME_MACHINE="alpha" - ;; - 15) - UNAME_MACHINE="alphaev5" - ;; - 14) - UNAME_MACHINE="alphaev56" - ;; - 10) - UNAME_MACHINE="alphapca56" - ;; - 16) - UNAME_MACHINE="alphaev6" - ;; - esac - - objdump --private-headers dummy | \ - grep ld.so.1 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f dummy.s dummy - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 - elif test "${UNAME_MACHINE}" = "mips" ; then - cat >dummy.c </dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - else - # Either a pre-BFD a.out linker (linux-gnuoldld) - # or one that does not give us useful --help. - # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. - # If ld does not provide *any* "supported emulations:" - # that means it is gnuoldld. - echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" - test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 - - case "${UNAME_MACHINE}" in - i?86) - VENDOR=pc; - ;; - *) - VENDOR=unknown; - ;; - esac - # Determine whether the default compiler is a.out or elf - cat >dummy.c < -main(argc, argv) - int argc; - char *argv[]; -{ -#ifdef __ELF__ -# ifdef __GLIBC__ -# if __GLIBC__ >= 2 - printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); -# else - printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); -# endif -# else - printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); -# endif -#else - printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); -#endif - return 0; -} -EOF - ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - fi ;; -# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions -# are messed up and put the nodename in both sysname and nodename. - i?86:DYNIX/ptx:4*:*) - echo i386-sequent-sysv4 - exit 0 ;; - i?86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} - fi - exit 0 ;; - i?86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - pc:*:*:*) - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - i?86:LynxOS:2.*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:*:6*) - echo mips-sony-newsos6 - exit 0 ;; - R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -cat >dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -#if !defined (ultrix) - printf ("vax-dec-bsd\n"); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 -rm -f dummy.c dummy - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -#echo '(Unable to guess system type)' 1>&2 - -exit 1 diff --git a/libjpegtwrp/config.sub b/libjpegtwrp/config.sub deleted file mode 100755 index 213a6d47d..000000000 --- a/libjpegtwrp/config.sub +++ /dev/null @@ -1,954 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script, version 1.1. -# Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -if [ x$1 = x ] -then - echo Configuration name missing. 1>&2 - echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 - echo "or $0 ALIAS" 1>&2 - echo where ALIAS is a recognized configuration type. 1>&2 - exit 1 -fi - -# First pass through any local machine types. -case $1 in - *local*) - echo $1 - exit 0 - ;; - *) - ;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - linux-gnu*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple) - os= - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 \ - | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \ - | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ - | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ - | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ - | mipstx39 | mipstx39el \ - | sparc | sparclet | sparclite | sparc64 | v850) - basic_machine=$basic_machine-unknown - ;; - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i[3456]86) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \ - | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ - | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ - | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \ - | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \ - | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \ - | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \ - | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ - | sparc64-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-* \ - | mipstx39-* | mipstx39el-* \ - | f301-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-cbm - ;; - amigaos | amigados) - basic_machine=m68k-cbm - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-cbm - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | ymp) - basic_machine=ymp-cray - os=-unicos - ;; - cray2) - basic_machine=cray2-cray - os=-unicos - ;; - [ctj]90-cray) - basic_machine=c90-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - os=-mvs - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i[3456]86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i[3456]86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i[3456]86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i[3456]86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - miniframe) - basic_machine=m68000-convergent - ;; - mipsel*-linux*) - basic_machine=mipsel-unknown - os=-linux-gnu - ;; - mips*-linux*) - basic_machine=mips-unknown - os=-linux-gnu - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - np1) - basic_machine=np1-gould - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5) - basic_machine=i586-intel - ;; - pentiumpro | p6) - basic_machine=i686-intel - ;; - pentium-* | p5-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - k5) - # We don't have specific support for AMD's K5 yet, so just call it a Pentium - basic_machine=i586-amd - ;; - nexen) - # We don't have specific support for Nexgen yet, so just call it a Pentium - basic_machine=i586-nexgen - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=rs6000-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - xmp) - basic_machine=xmp-cray - os=-unicos - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - mips) - if [ x$os = x-linux-gnu ]; then - basic_machine=mips-unknown - else - basic_machine=mips-mips - fi - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sparc) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -ctix* | -uts*) - os=-sysv - ;; - -ns2 ) - os=-nextstep2 - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -xenix) - os=-xenix - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-semi) - os=-aout - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-ibm) - os=-aix - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f301-fujitsu) - os=-uxpv - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -hpux*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxsim* | -vxworks*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os diff --git a/libjpegtwrp/configure b/libjpegtwrp/configure deleted file mode 100755 index 35c9db5ca..000000000 --- a/libjpegtwrp/configure +++ /dev/null @@ -1,2011 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --enable-shared build shared library using GNU libtool" -ac_help="$ac_help - --enable-static build static library using GNU libtool" -ac_help="$ac_help - --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB" -ac_help="$ac_help -" - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *=*) - varname=`echo "$ac_option"|sed -e 's/=.*//'` - # Reject names that aren't valid shell variable names. - if test -n "`echo $varname| sed 's/[a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $varname: invalid shell variable name" 1>&2; exit 1; } - fi - val="`echo "$ac_option"|sed 's/[^=]*=//'`" - test -n "$verbose" && echo " setting shell variable $varname to $val" - eval "$varname='$val'" - eval "export $varname" ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=jcmaster.c - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:538: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:567: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - ac_prog_rejected=no - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:615: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:654: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes - test "${CFLAGS+set}" = set || CFLAGS="-O2" -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-O" -fi - -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:681: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:702: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:719: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - -echo $ac_n "checking for function prototypes""... $ac_c" 1>&6 -echo "configure:742: checking for function prototypes" >&5 -if eval "test \"`echo '$''{'ijg_cv_have_prototypes'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ijg_cv_have_prototypes=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ijg_cv_have_prototypes=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ijg_cv_have_prototypes" 1>&6 -if test $ijg_cv_have_prototypes = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_PROTOTYPES -EOF - -else - echo Your compiler does not seem to know about function prototypes. - echo Perhaps it needs a special switch to enable ANSI C mode. - echo If so, we recommend running configure like this: - echo " ./configure CC='cc -switch'" - echo where -switch is the proper switch. -fi -ac_safe=`echo "stddef.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for stddef.h""... $ac_c" 1>&6 -echo "configure:792: checking for stddef.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define HAVE_STDDEF_H -EOF - -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "stdlib.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6 -echo "configure:828: checking for stdlib.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define HAVE_STDLIB_H -EOF - -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "string.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for string.h""... $ac_c" 1>&6 -echo "configure:864: checking for string.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -cat >> confdefs.h <<\EOF -#define NEED_BSD_STRINGS -EOF - -fi - -echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:900: checking for size_t" >&5 -cat > conftest.$ac_ext < -#endif -#ifdef HAVE_STDLIB_H -#include -#endif -#include -#ifdef NEED_BSD_STRINGS -#include -#else -#include -#endif -typedef size_t my_size_t; - -int main() { - my_size_t foovar; -; return 0; } -EOF -if { (eval echo configure:923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ijg_size_t_ok=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h" -fi -rm -f conftest* -echo "$ac_t""$ijg_size_t_ok" 1>&6 -if test "$ijg_size_t_ok" != yes; then -ac_safe=`echo "sys/types.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for sys/types.h""... $ac_c" 1>&6 -echo "configure:937: checking for sys/types.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define NEED_SYS_TYPES_H -EOF - -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t" >/dev/null 2>&1; then - rm -rf conftest* - ijg_size_t_ok="size_t is in sys/types.h" -else - rm -rf conftest* - ijg_size_t_ok=no -fi -rm -f conftest* - -else - echo "$ac_t""no" 1>&6 -ijg_size_t_ok=no -fi - -echo "$ac_t""$ijg_size_t_ok" 1>&6 -if test "$ijg_size_t_ok" = no; then - echo Type size_t is not defined in any of the usual places. - echo Try putting '"typedef unsigned int size_t;"' in jconfig.h. -fi -fi -echo $ac_n "checking for type unsigned char""... $ac_c" 1>&6 -echo "configure:994: checking for type unsigned char" >&5 -cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - echo "$ac_t""yes" 1>&6 -cat >> confdefs.h <<\EOF -#define HAVE_UNSIGNED_CHAR -EOF - -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""no" 1>&6 -fi -rm -f conftest* -echo $ac_n "checking for type unsigned short""... $ac_c" 1>&6 -echo "configure:1018: checking for type unsigned short" >&5 -cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - echo "$ac_t""yes" 1>&6 -cat >> confdefs.h <<\EOF -#define HAVE_UNSIGNED_SHORT -EOF - -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""no" 1>&6 -fi -rm -f conftest* -echo $ac_n "checking for type void""... $ac_c" 1>&6 -echo "configure:1042: checking for type void" >&5 -cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - echo "$ac_t""yes" 1>&6 -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""no" 1>&6 -cat >> confdefs.h <<\EOF -#define void char -EOF - -fi -rm -f conftest* - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1088: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if { (eval echo configure:1142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_const=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 -if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF - -fi - -echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1163: checking for inline" >&5 -ijg_cv_inline="" -cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ijg_cv_inline="__inline__" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ijg_cv_inline="__inline" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ijg_cv_inline="inline" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 -fi -rm -f conftest* -fi -rm -f conftest* -fi -rm -f conftest* -echo "$ac_t""$ijg_cv_inline" 1>&6 -cat >> confdefs.h <&6 -echo "configure:1224: checking for broken incomplete types" >&5 -cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - echo "$ac_t""ok" 1>&6 -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""broken" 1>&6 -cat >> confdefs.h <<\EOF -#define INCOMPLETE_TYPES_BROKEN -EOF - -fi -rm -f conftest* -echo $ac_n "checking for short external names""... $ac_c" 1>&6 -echo "configure:1248: checking for short external names" >&5 -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - echo "$ac_t""ok" 1>&6 -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""short" 1>&6 -cat >> confdefs.h <<\EOF -#define NEED_SHORT_EXTERNAL_NAMES -EOF - -fi -rm -f conftest* -echo $ac_n "checking to see if char is signed""... $ac_c" 1>&6 -echo "configure:1275: checking to see if char is signed" >&5 -if test "$cross_compiling" = yes; then - echo Assuming that char is signed on target machine. -echo If it is unsigned, this will be a little bit inefficient. - -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - echo "$ac_t""no" 1>&6 -cat >> confdefs.h <<\EOF -#define CHAR_IS_UNSIGNED -EOF - -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - echo "$ac_t""yes" 1>&6 -fi -rm -fr conftest* -fi - -echo $ac_n "checking to see if right shift is signed""... $ac_c" 1>&6 -echo "configure:1323: checking to see if right shift is signed" >&5 -if test "$cross_compiling" = yes; then - echo "$ac_t""Assuming that right shift is signed on target machine." 1>&6 -else - cat > conftest.$ac_ext <> 4; - - if (res == -0x7F7E80CL) { /* expected result for signed shift */ - return 1; /* right shift is signed */ - } - /* see if unsigned-shift hack will fix it. */ - /* we can't just test exact value since it depends on width of long... */ - res |= (~0L) << (32-4); - if (res == -0x7F7E80CL) { /* expected result now? */ - return 0; /* right shift is unsigned */ - } - printf("Right shift isn't acting as I expect it to.\n"); - printf("I fear the JPEG software will not work at all.\n\n"); - return 0; /* try it with unsigned anyway */ -} -main() { - exit(is_shifting_signed(-0x7F7E80B1L)); -} -EOF -if { (eval echo configure:1358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - echo "$ac_t""no" 1>&6 -cat >> confdefs.h <<\EOF -#define RIGHT_SHIFT_IS_UNSIGNED -EOF - -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - echo "$ac_t""yes" 1>&6 -fi -rm -fr conftest* -fi - -echo $ac_n "checking to see if fopen accepts b spec""... $ac_c" 1>&6 -echo "configure:1375: checking to see if fopen accepts b spec" >&5 -if test "$cross_compiling" = yes; then - echo "$ac_t""Assuming that it does." 1>&6 -else - cat > conftest.$ac_ext < -main() { - if (fopen("conftestdata", "wb") != NULL) - exit(0); - exit(1); -} -EOF -if { (eval echo configure:1390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - echo "$ac_t""yes" 1>&6 -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - echo "$ac_t""no" 1>&6 -cat >> confdefs.h <<\EOF -#define DONT_USE_B_MODE -EOF - -fi -rm -fr conftest* -fi - -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1436: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - for ac_prog in ginstall installbsd scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - # OSF/1 installbsd also uses dspmsg, but is usable. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1488: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -# Decide whether to use libtool, -# and if so whether to build shared, static, or both flavors of library. -LTSHARED="no" -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - LTSHARED="$enableval" -fi - -LTSTATIC="no" -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - LTSTATIC="$enableval" -fi - -if test "x$LTSHARED" != xno -o "x$LTSTATIC" != xno; then - USELIBTOOL="yes" - LIBTOOL="./libtool" - O="lo" - A="la" - LN='$(LIBTOOL) --mode=link $(CC)' - INSTALL_LIB='$(LIBTOOL) --mode=install ${INSTALL}' - INSTALL_PROGRAM="\$(LIBTOOL) --mode=install $INSTALL_PROGRAM" -else - USELIBTOOL="no" - LIBTOOL="" - O="o" - A="a" - LN='$(CC)' - INSTALL_LIB="$INSTALL_DATA" -fi - - - - - - -# Configure libtool if needed. -if test $USELIBTOOL = yes; then - disable_shared= - disable_static= - if test "x$LTSHARED" = xno; then - disable_shared="--disable-shared" - fi - if test "x$LTSTATIC" = xno; then - disable_static="--disable-static" - fi - $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh -fi - -# Select memory manager depending on user input. -# If no "-enable-maxmem", use jmemnobs -MEMORYMGR='jmemnobs.$(O)' -MAXMEM="no" -# Check whether --enable-maxmem or --disable-maxmem was given. -if test "${enable_maxmem+set}" = set; then - enableval="$enable_maxmem" - MAXMEM="$enableval" -fi - -# support --with-maxmem for backwards compatibility with IJG V5. -# Check whether --with-maxmem or --without-maxmem was given. -if test "${with_maxmem+set}" = set; then - withval="$with_maxmem" - MAXMEM="$withval" -fi - -if test "x$MAXMEM" = xyes; then - MAXMEM=1 -fi -if test "x$MAXMEM" != xno; then - if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then - { echo "configure: error: non-numeric argument to --enable-maxmem" 1>&2; exit 1; } - fi - DEFAULTMAXMEM=`expr $MAXMEM \* 1048576` -cat >> confdefs.h <&6 -echo "configure:1596: checking for 'tmpfile()'" >&5 -cat > conftest.$ac_ext < -int main() { - FILE * tfile = tmpfile(); -; return 0; } -EOF -if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - echo "$ac_t""yes" 1>&6 -MEMORYMGR='jmemansi.$(O)' -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""no" 1>&6 -MEMORYMGR='jmemname.$(O)' -cat >> confdefs.h <<\EOF -#define NEED_SIGNAL_CATCHER -EOF - -echo $ac_n "checking for 'mktemp()'""... $ac_c" 1>&6 -echo "configure:1620: checking for 'mktemp()'" >&5 -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - echo "$ac_t""yes" 1>&6 -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - echo "$ac_t""no" 1>&6 -cat >> confdefs.h <<\EOF -#define NO_MKTEMP -EOF - -fi -rm -f conftest* -fi -rm -f conftest* -fi - - -# Extract the library version ID from jpeglib.h. -echo $ac_n "checking libjpeg version number""... $ac_c" 1>&6 -echo "configure:1650: checking libjpeg version number" >&5 -JPEG_LIB_VERSION=`sed -e '/^#define JPEG_LIB_VERSION/!d' -e 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/' $srcdir/jpeglib.h` -echo "$ac_t""$JPEG_LIB_VERSION" 1>&6 - - -# Prepare to massage makefile.cfg correctly. -if test $ijg_cv_have_prototypes = yes; then - A2K_DEPS="" - COM_A2K="# " -else - A2K_DEPS="ansi2knr" - COM_A2K="" -fi - - -# ansi2knr needs -DBSD if string.h is missing -if test $ac_cv_header_string_h = no; then - ANSI2KNRFLAGS="-DBSD" -else - ANSI2KNRFLAGS="" -fi - -# Substitutions to enable or disable libtool-related stuff -if test $USELIBTOOL = yes -a $ijg_cv_have_prototypes = yes; then - COM_LT="" -else - COM_LT="# " -fi - -if test "x$LTSHARED" != xno; then - FORCE_INSTALL_LIB="install-lib" -else - FORCE_INSTALL_LIB="" -fi - -# Set up -I directives -if test "x$srcdir" = x.; then - INCLUDEFLAGS='-I$(srcdir)' -else - INCLUDEFLAGS='-I. -I$(srcdir)' -fi - -trap '' 1 2 15 - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -DEFS=-DHAVE_CONFIG_H - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS </dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "Makefile:makefile.cfg jconfig.h:jconfig.cfg" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@CC@%$CC%g -s%@CPP@%$CPP%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@RANLIB@%$RANLIB%g -s%@LIBTOOL@%$LIBTOOL%g -s%@O@%$O%g -s%@A@%$A%g -s%@LN@%$LN%g -s%@INSTALL_LIB@%$INSTALL_LIB%g -s%@MEMORYMGR@%$MEMORYMGR%g -s%@JPEG_LIB_VERSION@%$JPEG_LIB_VERSION%g -s%@A2K_DEPS@%$A2K_DEPS%g -s%@COM_A2K@%$COM_A2K%g -s%@ANSI2KNRFLAGS@%$ANSI2KNRFLAGS%g -s%@COM_LT@%$COM_LT%g -s%@FORCE_INSTALL_LIB@%$FORCE_INSTALL_LIB%g -s%@INCLUDEFLAGS@%$INCLUDEFLAGS%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='\([ ]\)%\1#\2define\3' -ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' - -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - echo creating $ac_file - - rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in - -EOF - -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -EOF - -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. - -rm -f conftest.tail -while : -do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS - echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals -done -rm -f conftest.vals - -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h - else - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - fi - rm -f $ac_file - mv conftest.h $ac_file - fi -fi; done - -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/libjpegtwrp/djpeg.1 b/libjpegtwrp/djpeg.1 deleted file mode 100644 index 11beb6a51..000000000 --- a/libjpegtwrp/djpeg.1 +++ /dev/null @@ -1,253 +0,0 @@ -.TH DJPEG 1 "22 August 1997" -.SH NAME -djpeg \- decompress a JPEG file to an image file -.SH SYNOPSIS -.B djpeg -[ -.I options -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B djpeg -decompresses the named JPEG file, or the standard input if no file is named, -and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP, -GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. -(RLE is supported only if the URT library is available.) -.SH OPTIONS -All switch names may be abbreviated; for example, -.B \-grayscale -may be written -.B \-gray -or -.BR \-gr . -Most of the "basic" switches can be abbreviated to as little as one letter. -Upper and lower case are equivalent (thus -.B \-BMP -is the same as -.BR \-bmp ). -British spellings are also accepted (e.g., -.BR \-greyscale ), -though for brevity these are not mentioned below. -.PP -The basic switches are: -.TP -.BI \-colors " N" -Reduce image to at most N colors. This reduces the number of colors used in -the output image, so that it can be displayed on a colormapped display or -stored in a colormapped file format. For example, if you have an 8-bit -display, you'd need to reduce to 256 or fewer colors. -.TP -.BI \-quantize " N" -Same as -.BR \-colors . -.B \-colors -is the recommended name, -.B \-quantize -is provided only for backwards compatibility. -.TP -.B \-fast -Select recommended processing options for fast, low quality output. (The -default options are chosen for highest quality output.) Currently, this is -equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR. -.TP -.B \-grayscale -Force gray-scale output even if JPEG file is color. Useful for viewing on -monochrome displays; also, -.B djpeg -runs noticeably faster in this mode. -.TP -.BI \-scale " M/N" -Scale the output image by a factor M/N. Currently the scale factor must be -1/1, 1/2, 1/4, or 1/8. Scaling is handy if the image is larger than your -screen; also, -.B djpeg -runs much faster when scaling down the output. -.TP -.B \-bmp -Select BMP output format (Windows flavor). 8-bit colormapped format is -emitted if -.B \-colors -or -.B \-grayscale -is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color -format is emitted. -.TP -.B \-gif -Select GIF output format. Since GIF does not support more than 256 colors, -.B \-colors 256 -is assumed (unless you specify a smaller number of colors). -.TP -.B \-os2 -Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is -emitted if -.B \-colors -or -.B \-grayscale -is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color -format is emitted. -.TP -.B \-pnm -Select PBMPLUS (PPM/PGM) output format (this is the default format). -PGM is emitted if the JPEG file is gray-scale or if -.B \-grayscale -is specified; otherwise PPM is emitted. -.TP -.B \-rle -Select RLE output format. (Requires URT library.) -.TP -.B \-targa -Select Targa output format. Gray-scale format is emitted if the JPEG file is -gray-scale or if -.B \-grayscale -is specified; otherwise, colormapped format is emitted if -.B \-colors -is specified; otherwise, 24-bit full-color format is emitted. -.PP -Switches for advanced users: -.TP -.B \-dct int -Use integer DCT method (default). -.TP -.B \-dct fast -Use fast integer DCT (less accurate). -.TP -.B \-dct float -Use floating-point DCT method. -The float method is very slightly more accurate than the int method, but is -much slower unless your machine has very fast floating-point hardware. Also -note that results of the floating-point method may vary slightly across -machines, while the integer methods should give the same results everywhere. -The fast integer method is much less accurate than the other two. -.TP -.B \-dither fs -Use Floyd-Steinberg dithering in color quantization. -.TP -.B \-dither ordered -Use ordered dithering in color quantization. -.TP -.B \-dither none -Do not use dithering in color quantization. -By default, Floyd-Steinberg dithering is applied when quantizing colors; this -is slow but usually produces the best results. Ordered dither is a compromise -between speed and quality; no dithering is fast but usually looks awful. Note -that these switches have no effect unless color quantization is being done. -Ordered dither is only available in -.B \-onepass -mode. -.TP -.BI \-map " file" -Quantize to the colors used in the specified image file. This is useful for -producing multiple files with identical color maps, or for forcing a -predefined set of colors to be used. The -.I file -must be a GIF or PPM file. This option overrides -.B \-colors -and -.BR \-onepass . -.TP -.B \-nosmooth -Use a faster, lower-quality upsampling routine. -.TP -.B \-onepass -Use one-pass instead of two-pass color quantization. The one-pass method is -faster and needs less memory, but it produces a lower-quality image. -.B \-onepass -is ignored unless you also say -.B \-colors -.IR N . -Also, the one-pass method is always used for gray-scale output (the two-pass -method is no improvement then). -.TP -.BI \-maxmemory " N" -Set limit for amount of memory to use in processing large images. Value is -in thousands of bytes, or millions of bytes if "M" is attached to the -number. For example, -.B \-max 4m -selects 4000000 bytes. If more space is needed, temporary files will be used. -.TP -.BI \-outfile " name" -Send output image to the named file, not to standard output. -.TP -.B \-verbose -Enable debug printout. More -.BR \-v 's -give more output. Also, version information is printed at startup. -.TP -.B \-debug -Same as -.BR \-verbose . -.SH EXAMPLES -.LP -This example decompresses the JPEG file foo.jpg, quantizes it to -256 colors, and saves the output in 8-bit BMP format in foo.bmp: -.IP -.B djpeg \-colors 256 \-bmp -.I foo.jpg -.B > -.I foo.bmp -.SH HINTS -To get a quick preview of an image, use the -.B \-grayscale -and/or -.B \-scale -switches. -.B \-grayscale \-scale 1/8 -is the fastest case. -.PP -Several options are available that trade off image quality to gain speed. -.B \-fast -turns on the recommended settings. -.PP -.B \-dct fast -and/or -.B \-nosmooth -gain speed at a small sacrifice in quality. -When producing a color-quantized image, -.B \-onepass \-dither ordered -is fast but much lower quality than the default behavior. -.B \-dither none -may give acceptable results in two-pass mode, but is seldom tolerable in -one-pass mode. -.PP -If you are fortunate enough to have very fast floating point hardware, -\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most -machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is -not worth using, because its theoretical accuracy advantage is too small to be -significant in practice. -.SH ENVIRONMENT -.TP -.B JPEGMEM -If this environment variable is set, its value is the default memory limit. -The value is specified as described for the -.B \-maxmemory -switch. -.B JPEGMEM -overrides the default value specified when the program was compiled, and -itself is overridden by an explicit -.BR \-maxmemory . -.SH SEE ALSO -.BR cjpeg (1), -.BR jpegtran (1), -.BR rdjpgcom (1), -.BR wrjpgcom (1) -.br -.BR ppm (5), -.BR pgm (5) -.br -Wallace, Gregory K. "The JPEG Still Picture Compression Standard", -Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. -.SH AUTHOR -Independent JPEG Group -.SH BUGS -Arithmetic coding is not supported for legal reasons. -.PP -To avoid the Unisys LZW patent, -.B djpeg -produces uncompressed GIF files. These are larger than they should be, but -are readable by standard GIF decoders. -.PP -Still not as fast as we'd like. diff --git a/libjpegtwrp/djpeg.c b/libjpegtwrp/djpeg.c deleted file mode 100644 index e099e90ae..000000000 --- a/libjpegtwrp/djpeg.c +++ /dev/null @@ -1,616 +0,0 @@ -/* - * djpeg.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for the JPEG decompressor. - * It should work on any system with Unix- or MS-DOS-style command lines. - * - * Two different command line styles are permitted, depending on the - * compile-time switch TWO_FILE_COMMANDLINE: - * djpeg [options] inputfile outputfile - * djpeg [options] [inputfile] - * In the second style, output is always to standard output, which you'd - * normally redirect to a file or pipe to some other program. Input is - * either from a named file or from standard input (typically redirected). - * The second style is convenient on Unix but is unhelpful on systems that - * don't support pipes. Also, you MUST use the first style if your system - * doesn't do binary I/O to stdin/stdout. - * To simplify script writing, the "-outfile" switch is provided. The syntax - * djpeg [options] -outfile outputfile inputfile - * works regardless of which command line style is used. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "jversion.h" /* for version message */ - -#include /* to declare isprint() */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* Create the add-on message string table. */ - -#define JMESSAGE(code,string) string , - -static const char * const cdjpeg_message_table[] = { -#include "cderror.h" - NULL -}; - - -/* - * This list defines the known output image formats - * (not all of which need be supported by a given version). - * You can change the default output format by defining DEFAULT_FMT; - * indeed, you had better do so if you undefine PPM_SUPPORTED. - */ - -typedef enum { - FMT_BMP, /* BMP format (Windows flavor) */ - FMT_GIF, /* GIF format */ - FMT_OS2, /* BMP format (OS/2 flavor) */ - FMT_PPM, /* PPM/PGM (PBMPLUS formats) */ - FMT_RLE, /* RLE format */ - FMT_TARGA, /* Targa format */ - FMT_TIFF /* TIFF format */ -} IMAGE_FORMATS; - -#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */ -#define DEFAULT_FMT FMT_PPM -#endif - -static IMAGE_FORMATS requested_fmt; - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ - - -LOCAL(void) -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -colors N Reduce image to no more than N colors\n"); - fprintf(stderr, " -fast Fast, low-quality processing\n"); - fprintf(stderr, " -grayscale Force grayscale output\n"); -#ifdef IDCT_SCALING_SUPPORTED - fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n"); -#endif -#ifdef BMP_SUPPORTED - fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n", - (DEFAULT_FMT == FMT_BMP ? " (default)" : "")); -#endif -#ifdef GIF_SUPPORTED - fprintf(stderr, " -gif Select GIF output format%s\n", - (DEFAULT_FMT == FMT_GIF ? " (default)" : "")); -#endif -#ifdef BMP_SUPPORTED - fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n", - (DEFAULT_FMT == FMT_OS2 ? " (default)" : "")); -#endif -#ifdef PPM_SUPPORTED - fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n", - (DEFAULT_FMT == FMT_PPM ? " (default)" : "")); -#endif -#ifdef RLE_SUPPORTED - fprintf(stderr, " -rle Select Utah RLE output format%s\n", - (DEFAULT_FMT == FMT_RLE ? " (default)" : "")); -#endif -#ifdef TARGA_SUPPORTED - fprintf(stderr, " -targa Select Targa output format%s\n", - (DEFAULT_FMT == FMT_TARGA ? " (default)" : "")); -#endif - fprintf(stderr, "Switches for advanced users:\n"); -#ifdef DCT_ISLOW_SUPPORTED - fprintf(stderr, " -dct int Use integer DCT method%s\n", - (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : "")); -#endif -#ifdef DCT_IFAST_SUPPORTED - fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n", - (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : "")); -#endif -#ifdef DCT_FLOAT_SUPPORTED - fprintf(stderr, " -dct float Use floating-point DCT method%s\n", - (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : "")); -#endif - fprintf(stderr, " -dither fs Use F-S dithering (default)\n"); - fprintf(stderr, " -dither none Don't use dithering in quantization\n"); - fprintf(stderr, " -dither ordered Use ordered dither (medium speed, quality)\n"); -#ifdef QUANT_2PASS_SUPPORTED - fprintf(stderr, " -map FILE Map to colors used in named image file\n"); -#endif - fprintf(stderr, " -nosmooth Don't use high-quality upsampling\n"); -#ifdef QUANT_1PASS_SUPPORTED - fprintf(stderr, " -onepass Use 1-pass quantization (fast, low quality)\n"); -#endif - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - exit(EXIT_FAILURE); -} - - -LOCAL(int) -parse_switches (j_decompress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - - /* Set up default JPEG parameters. */ - requested_fmt = DEFAULT_FMT; /* set default output file format */ - outfilename = NULL; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "bmp", 1)) { - /* BMP output format. */ - requested_fmt = FMT_BMP; - - } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) || - keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) { - /* Do color quantization. */ - int val; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d", &val) != 1) - usage(); - cinfo->desired_number_of_colors = val; - cinfo->quantize_colors = TRUE; - - } else if (keymatch(arg, "dct", 2)) { - /* Select IDCT algorithm. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "int", 1)) { - cinfo->dct_method = JDCT_ISLOW; - } else if (keymatch(argv[argn], "fast", 2)) { - cinfo->dct_method = JDCT_IFAST; - } else if (keymatch(argv[argn], "float", 2)) { - cinfo->dct_method = JDCT_FLOAT; - } else - usage(); - - } else if (keymatch(arg, "dither", 2)) { - /* Select dithering algorithm. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "fs", 2)) { - cinfo->dither_mode = JDITHER_FS; - } else if (keymatch(argv[argn], "none", 2)) { - cinfo->dither_mode = JDITHER_NONE; - } else if (keymatch(argv[argn], "ordered", 2)) { - cinfo->dither_mode = JDITHER_ORDERED; - } else - usage(); - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "fast", 1)) { - /* Select recommended processing options for quick-and-dirty output. */ - cinfo->two_pass_quantize = FALSE; - cinfo->dither_mode = JDITHER_ORDERED; - if (! cinfo->quantize_colors) /* don't override an earlier -colors */ - cinfo->desired_number_of_colors = 216; - cinfo->dct_method = JDCT_FASTEST; - cinfo->do_fancy_upsampling = FALSE; - - } else if (keymatch(arg, "gif", 1)) { - /* GIF output format. */ - requested_fmt = FMT_GIF; - - } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) { - /* Force monochrome output. */ - cinfo->out_color_space = JCS_GRAYSCALE; - - } else if (keymatch(arg, "map", 3)) { - /* Quantize to a color map taken from an input file. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (for_real) { /* too expensive to do twice! */ -#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ - FILE * mapfile; - - if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - read_color_map(cinfo, mapfile); - fclose(mapfile); - cinfo->quantize_colors = TRUE; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "nosmooth", 3)) { - /* Suppress fancy upsampling */ - cinfo->do_fancy_upsampling = FALSE; - - } else if (keymatch(arg, "onepass", 3)) { - /* Use fast one-pass quantization. */ - cinfo->two_pass_quantize = FALSE; - - } else if (keymatch(arg, "os2", 3)) { - /* BMP output format (OS/2 flavor). */ - requested_fmt = FMT_OS2; - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) { - /* PPM/PGM output format. */ - requested_fmt = FMT_PPM; - - } else if (keymatch(arg, "rle", 1)) { - /* RLE output format. */ - requested_fmt = FMT_RLE; - - } else if (keymatch(arg, "scale", 1)) { - /* Scale the output image by a fraction M/N. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%d/%d", - &cinfo->scale_num, &cinfo->scale_denom) != 2) - usage(); - - } else if (keymatch(arg, "targa", 1)) { - /* Targa output format. */ - requested_fmt = FMT_TARGA; - - } else { - usage(); /* bogus switch */ - } - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * Marker processor for COM and interesting APPn markers. - * This replaces the library's built-in processor, which just skips the marker. - * We want to print out the marker as text, to the extent possible. - * Note this code relies on a non-suspending data source. - */ - -LOCAL(unsigned int) -jpeg_getc (j_decompress_ptr cinfo) -/* Read next byte */ -{ - struct jpeg_source_mgr * datasrc = cinfo->src; - - if (datasrc->bytes_in_buffer == 0) { - if (! (*datasrc->fill_input_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } - datasrc->bytes_in_buffer--; - return GETJOCTET(*datasrc->next_input_byte++); -} - - -METHODDEF(boolean) -print_text_marker (j_decompress_ptr cinfo) -{ - boolean traceit = (cinfo->err->trace_level >= 1); - INT32 length; - unsigned int ch; - unsigned int lastch = 0; - - length = jpeg_getc(cinfo) << 8; - length += jpeg_getc(cinfo); - length -= 2; /* discount the length word itself */ - - if (traceit) { - if (cinfo->unread_marker == JPEG_COM) - fprintf(stderr, "Comment, length %ld:\n", (long) length); - else /* assume it is an APPn otherwise */ - fprintf(stderr, "APP%d, length %ld:\n", - cinfo->unread_marker - JPEG_APP0, (long) length); - } - - while (--length >= 0) { - ch = jpeg_getc(cinfo); - if (traceit) { - /* Emit the character in a readable form. - * Nonprintables are converted to \nnn form, - * while \ is converted to \\. - * Newlines in CR, CR/LF, or LF form will be printed as one newline. - */ - if (ch == '\r') { - fprintf(stderr, "\n"); - } else if (ch == '\n') { - if (lastch != '\r') - fprintf(stderr, "\n"); - } else if (ch == '\\') { - fprintf(stderr, "\\\\"); - } else if (isprint(ch)) { - putc(ch, stderr); - } else { - fprintf(stderr, "\\%03o", ch); - } - lastch = ch; - } - } - - if (traceit) - fprintf(stderr, "\n"); - - return TRUE; -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - struct jpeg_decompress_struct cinfo; - struct jpeg_error_mgr jerr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - int file_index; - djpeg_dest_ptr dest_mgr = NULL; - FILE * input_file; - FILE * output_file; - JDIMENSION num_scanlines; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "djpeg"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG decompression object with default error handling. */ - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_decompress(&cinfo); - /* Add some application-specific error messages (from cderror.h) */ - jerr.addon_message_table = cdjpeg_message_table; - jerr.first_addon_message = JMSG_FIRSTADDONCODE; - jerr.last_addon_message = JMSG_LASTADDONCODE; - - /* Insert custom marker processor for COM and APP12. - * APP12 is used by some digital camera makers for textual info, - * so we provide the ability to display it as text. - * If you like, additional APPn marker types can be selected for display, - * but don't try to override APP0 or APP14 this way (see libjpeg.doc). - */ - jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker); - jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker); - - /* Now safe to enable signal catcher. */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &cinfo); -#endif - - /* Scan command line to find file names. */ - /* It is convenient to use just one switch-parsing routine, but the switch - * values read here are ignored; we will rescan the switches after opening - * the input file. - * (Exception: tracing level set here controls verbosity for COM markers - * found during jpeg_read_header...) - */ - - file_index = parse_switches(&cinfo, argc, argv, 0, FALSE); - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &cinfo, &progress); -#endif - - /* Specify data source for decompression */ - jpeg_stdio_src(&cinfo, input_file); - - /* Read file header, set default decompression parameters */ - (void) jpeg_read_header(&cinfo, TRUE); - - /* Adjust default decompression parameters by re-parsing the options */ - file_index = parse_switches(&cinfo, argc, argv, 0, TRUE); - - /* Initialize the output module now to let it override any crucial - * option settings (for instance, GIF wants to force color quantization). - */ - switch (requested_fmt) { -#ifdef BMP_SUPPORTED - case FMT_BMP: - dest_mgr = jinit_write_bmp(&cinfo, FALSE); - break; - case FMT_OS2: - dest_mgr = jinit_write_bmp(&cinfo, TRUE); - break; -#endif -#ifdef GIF_SUPPORTED - case FMT_GIF: - dest_mgr = jinit_write_gif(&cinfo); - break; -#endif -#ifdef PPM_SUPPORTED - case FMT_PPM: - dest_mgr = jinit_write_ppm(&cinfo); - break; -#endif -#ifdef RLE_SUPPORTED - case FMT_RLE: - dest_mgr = jinit_write_rle(&cinfo); - break; -#endif -#ifdef TARGA_SUPPORTED - case FMT_TARGA: - dest_mgr = jinit_write_targa(&cinfo); - break; -#endif - default: - ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT); - break; - } - dest_mgr->output_file = output_file; - - /* Start decompressor */ - (void) jpeg_start_decompress(&cinfo); - - /* Write output file header */ - (*dest_mgr->start_output) (&cinfo, dest_mgr); - - /* Process data */ - while (cinfo.output_scanline < cinfo.output_height) { - num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer, - dest_mgr->buffer_height); - (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines); - } - -#ifdef PROGRESS_REPORT - /* Hack: count final pass as done in case finish_output does an extra pass. - * The library won't have updated completed_passes. - */ - progress.pub.completed_passes = progress.pub.total_passes; -#endif - - /* Finish decompression and release memory. - * I must do it in this order because output module has allocated memory - * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory. - */ - (*dest_mgr->finish_output) (&cinfo, dest_mgr); - (void) jpeg_finish_decompress(&cinfo); - jpeg_destroy_decompress(&cinfo); - - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &cinfo); -#endif - - /* All done. */ - exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/libjpegtwrp/example.c b/libjpegtwrp/example.c deleted file mode 100644 index 7fc354f04..000000000 --- a/libjpegtwrp/example.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * example.c - * - * This file illustrates how to use the IJG code as a subroutine library - * to read or write JPEG image files. You should look at this code in - * conjunction with the documentation file libjpeg.doc. - * - * This code will not do anything useful as-is, but it may be helpful as a - * skeleton for constructing routines that call the JPEG library. - * - * We present these routines in the same coding style used in the JPEG code - * (ANSI function definitions, etc); but you are of course free to code your - * routines in a different style if you prefer. - */ - -#include - -/* - * Include file for users of JPEG library. - * You will need to have included system headers that define at least - * the typedefs FILE and size_t before you can include jpeglib.h. - * (stdio.h is sufficient on ANSI-conforming systems.) - * You may also wish to include "jerror.h". - */ - -#include "jpeglib.h" - -/* - * is used for the optional error recovery mechanism shown in - * the second part of the example. - */ - -#include - - - -/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/ - -/* This half of the example shows how to feed data into the JPEG compressor. - * We present a minimal version that does not worry about refinements such - * as error recovery (the JPEG code will just exit() if it gets an error). - */ - - -/* - * IMAGE DATA FORMATS: - * - * The standard input image format is a rectangular array of pixels, with - * each pixel having the same number of "component" values (color channels). - * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars). - * If you are working with color data, then the color values for each pixel - * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit - * RGB color. - * - * For this example, we'll assume that this data structure matches the way - * our application has stored the image in memory, so we can just pass a - * pointer to our image buffer. In particular, let's say that the image is - * RGB color and is described by: - */ - -extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */ -extern int image_height; /* Number of rows in image */ -extern int image_width; /* Number of columns in image */ - - -/* - * Sample routine for JPEG compression. We assume that the target file name - * and a compression quality factor are passed in. - */ - -GLOBAL(void) -write_JPEG_file (char * filename, int quality) -{ - /* This struct contains the JPEG compression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - * It is possible to have several such structures, representing multiple - * compression/decompression processes, in existence at once. We refer - * to any one struct (and its associated working data) as a "JPEG object". - */ - struct jpeg_compress_struct cinfo; - /* This struct represents a JPEG error handler. It is declared separately - * because applications often want to supply a specialized error handler - * (see the second half of this file for an example). But here we just - * take the easy way out and use the standard error handler, which will - * print a message on stderr and call exit() if compression fails. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct jpeg_error_mgr jerr; - /* More stuff */ - FILE * outfile; /* target file */ - JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ - int row_stride; /* physical row width in image buffer */ - - /* Step 1: allocate and initialize JPEG compression object */ - - /* We have to set up the error handler first, in case the initialization - * step fails. (Unlikely, but it could happen if you are out of memory.) - * This routine fills in the contents of struct jerr, and returns jerr's - * address which we place into the link field in cinfo. - */ - cinfo.err = jpeg_std_error(&jerr); - /* Now we can initialize the JPEG compression object. */ - jpeg_create_compress(&cinfo); - - /* Step 2: specify data destination (eg, a file) */ - /* Note: steps 2 and 3 can be done in either order. */ - - /* Here we use the library-supplied code to send compressed data to a - * stdio stream. You can also write your own code to do something else. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to write binary files. - */ - if ((outfile = fopen(filename, "wb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - exit(1); - } - jpeg_stdio_dest(&cinfo, outfile); - - /* Step 3: set parameters for compression */ - - /* First we supply a description of the input image. - * Four fields of the cinfo struct must be filled in: - */ - cinfo.image_width = image_width; /* image width and height, in pixels */ - cinfo.image_height = image_height; - cinfo.input_components = 3; /* # of color components per pixel */ - cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ - /* Now use the library's routine to set default compression parameters. - * (You must set at least cinfo.in_color_space before calling this, - * since the defaults depend on the source color space.) - */ - jpeg_set_defaults(&cinfo); - /* Now you can set any non-default parameters you wish to. - * Here we just illustrate the use of quality (quantization table) scaling: - */ - jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); - - /* Step 4: Start compressor */ - - /* TRUE ensures that we will write a complete interchange-JPEG file. - * Pass TRUE unless you are very sure of what you're doing. - */ - jpeg_start_compress(&cinfo, TRUE); - - /* Step 5: while (scan lines remain to be written) */ - /* jpeg_write_scanlines(...); */ - - /* Here we use the library's state variable cinfo.next_scanline as the - * loop counter, so that we don't have to keep track ourselves. - * To keep things simple, we pass one scanline per call; you can pass - * more if you wish, though. - */ - row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ - - while (cinfo.next_scanline < cinfo.image_height) { - /* jpeg_write_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could pass - * more than one scanline at a time if that's more convenient. - */ - row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; - (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); - } - - /* Step 6: Finish compression */ - - jpeg_finish_compress(&cinfo); - /* After finish_compress, we can close the output file. */ - fclose(outfile); - - /* Step 7: release JPEG compression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_compress(&cinfo); - - /* And we're done! */ -} - - -/* - * SOME FINE POINTS: - * - * In the above loop, we ignored the return value of jpeg_write_scanlines, - * which is the number of scanlines actually written. We could get away - * with this because we were only relying on the value of cinfo.next_scanline, - * which will be incremented correctly. If you maintain additional loop - * variables then you should be careful to increment them properly. - * Actually, for output to a stdio stream you needn't worry, because - * then jpeg_write_scanlines will write all the lines passed (or else exit - * with a fatal error). Partial writes can only occur if you use a data - * destination module that can demand suspension of the compressor. - * (If you don't know what that's for, you don't need it.) - * - * If the compressor requires full-image buffers (for entropy-coding - * optimization or a multi-scan JPEG file), it will create temporary - * files for anything that doesn't fit within the maximum-memory setting. - * (Note that temp files are NOT needed if you use the default parameters.) - * On some systems you may need to set up a signal handler to ensure that - * temporary files are deleted if the program is interrupted. See libjpeg.doc. - * - * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG - * files to be compatible with everyone else's. If you cannot readily read - * your data in that order, you'll need an intermediate array to hold the - * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top - * source data using the JPEG code's internal virtual-array mechanisms. - */ - - - -/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/ - -/* This half of the example shows how to read data from the JPEG decompressor. - * It's a bit more refined than the above, in that we show: - * (a) how to modify the JPEG library's standard error-reporting behavior; - * (b) how to allocate workspace using the library's memory manager. - * - * Just to make this example a little different from the first one, we'll - * assume that we do not intend to put the whole image into an in-memory - * buffer, but to send it line-by-line someplace else. We need a one- - * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG - * memory manager allocate it for us. This approach is actually quite useful - * because we don't need to remember to deallocate the buffer separately: it - * will go away automatically when the JPEG object is cleaned up. - */ - - -/* - * ERROR HANDLING: - * - * The JPEG library's standard error handler (jerror.c) is divided into - * several "methods" which you can override individually. This lets you - * adjust the behavior without duplicating a lot of code, which you might - * have to update with each future release. - * - * Our example here shows how to override the "error_exit" method so that - * control is returned to the library's caller when a fatal error occurs, - * rather than calling exit() as the standard error_exit method does. - * - * We use C's setjmp/longjmp facility to return control. This means that the - * routine which calls the JPEG library must first execute a setjmp() call to - * establish the return point. We want the replacement error_exit to do a - * longjmp(). But we need to make the setjmp buffer accessible to the - * error_exit routine. To do this, we make a private extension of the - * standard JPEG error handler object. (If we were using C++, we'd say we - * were making a subclass of the regular error handler.) - * - * Here's the extended error handler struct: - */ - -struct my_error_mgr { - struct jpeg_error_mgr pub; /* "public" fields */ - - jmp_buf setjmp_buffer; /* for return to caller */ -}; - -typedef struct my_error_mgr * my_error_ptr; - -/* - * Here's the routine that will replace the standard error_exit method: - */ - -METHODDEF(void) -my_error_exit (j_common_ptr cinfo) -{ - /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */ - my_error_ptr myerr = (my_error_ptr) cinfo->err; - - /* Always display the message. */ - /* We could postpone this until after returning, if we chose. */ - (*cinfo->err->output_message) (cinfo); - - /* Return control to the setjmp point */ - longjmp(myerr->setjmp_buffer, 1); -} - - -/* - * Sample routine for JPEG decompression. We assume that the source file name - * is passed in. We want to return 1 on success, 0 on error. - */ - - -GLOBAL(int) -read_JPEG_file (char * filename) -{ - /* This struct contains the JPEG decompression parameters and pointers to - * working space (which is allocated as needed by the JPEG library). - */ - struct jpeg_decompress_struct cinfo; - /* We use our private extension JPEG error handler. - * Note that this struct must live as long as the main JPEG parameter - * struct, to avoid dangling-pointer problems. - */ - struct my_error_mgr jerr; - /* More stuff */ - FILE * infile; /* source file */ - JSAMPARRAY buffer; /* Output row buffer */ - int row_stride; /* physical row width in output buffer */ - - /* In this example we want to open the input file before doing anything else, - * so that the setjmp() error recovery below can assume the file is open. - * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that - * requires it in order to read binary files. - */ - - if ((infile = fopen(filename, "rb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - return 0; - } - - /* Step 1: allocate and initialize JPEG decompression object */ - - /* We set up the normal JPEG error routines, then override error_exit. */ - cinfo.err = jpeg_std_error(&jerr.pub); - jerr.pub.error_exit = my_error_exit; - /* Establish the setjmp return context for my_error_exit to use. */ - if (setjmp(jerr.setjmp_buffer)) { - /* If we get here, the JPEG code has signaled an error. - * We need to clean up the JPEG object, close the input file, and return. - */ - jpeg_destroy_decompress(&cinfo); - fclose(infile); - return 0; - } - /* Now we can initialize the JPEG decompression object. */ - jpeg_create_decompress(&cinfo); - - /* Step 2: specify data source (eg, a file) */ - - jpeg_stdio_src(&cinfo, infile); - - /* Step 3: read file parameters with jpeg_read_header() */ - - (void) jpeg_read_header(&cinfo, TRUE); - /* We can ignore the return value from jpeg_read_header since - * (a) suspension is not possible with the stdio data source, and - * (b) we passed TRUE to reject a tables-only JPEG file as an error. - * See libjpeg.doc for more info. - */ - - /* Step 4: set parameters for decompression */ - - /* In this example, we don't need to change any of the defaults set by - * jpeg_read_header(), so we do nothing here. - */ - - /* Step 5: Start decompressor */ - - (void) jpeg_start_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* We may need to do some setup of our own at this point before reading - * the data. After jpeg_start_decompress() we have the correct scaled - * output image dimensions available, as well as the output colormap - * if we asked for color quantization. - * In this example, we need to make an output work buffer of the right size. - */ - /* JSAMPLEs per row in output buffer */ - row_stride = cinfo.output_width * cinfo.output_components; - /* Make a one-row-high sample array that will go away when done with image */ - buffer = (*cinfo.mem->alloc_sarray) - ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1); - - /* Step 6: while (scan lines remain to be read) */ - /* jpeg_read_scanlines(...); */ - - /* Here we use the library's state variable cinfo.output_scanline as the - * loop counter, so that we don't have to keep track ourselves. - */ - while (cinfo.output_scanline < cinfo.output_height) { - /* jpeg_read_scanlines expects an array of pointers to scanlines. - * Here the array is only one element long, but you could ask for - * more than one scanline at a time if that's more convenient. - */ - (void) jpeg_read_scanlines(&cinfo, buffer, 1); - /* Assume put_scanline_someplace wants a pointer and sample count. */ - put_scanline_someplace(buffer[0], row_stride); - } - - /* Step 7: Finish decompression */ - - (void) jpeg_finish_decompress(&cinfo); - /* We can ignore the return value since suspension is not possible - * with the stdio data source. - */ - - /* Step 8: Release JPEG decompression object */ - - /* This is an important step since it will release a good deal of memory. */ - jpeg_destroy_decompress(&cinfo); - - /* After finish_decompress, we can close the input file. - * Here we postpone it until after no more JPEG errors are possible, - * so as to simplify the setjmp error logic above. (Actually, I don't - * think that jpeg_destroy can do an error exit, but why assume anything...) - */ - fclose(infile); - - /* At this point you may want to check to see whether any corrupt-data - * warnings occurred (test whether jerr.pub.num_warnings is nonzero). - */ - - /* And we're done! */ - return 1; -} - - -/* - * SOME FINE POINTS: - * - * In the above code, we ignored the return value of jpeg_read_scanlines, - * which is the number of scanlines actually read. We could get away with - * this because we asked for only one line at a time and we weren't using - * a suspending data source. See libjpeg.doc for more info. - * - * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress(); - * we should have done it beforehand to ensure that the space would be - * counted against the JPEG max_memory setting. In some systems the above - * code would risk an out-of-memory error. However, in general we don't - * know the output image dimensions before jpeg_start_decompress(), unless we - * call jpeg_calc_output_dimensions(). See libjpeg.doc for more about this. - * - * Scanlines are returned in the same order as they appear in the JPEG file, - * which is standardly top-to-bottom. If you must emit data bottom-to-top, - * you can use one of the virtual arrays provided by the JPEG memory manager - * to invert the data. See wrbmp.c for an example. - * - * As with compression, some operating modes may require temporary files. - * On some systems you may need to set up a signal handler to ensure that - * temporary files are deleted if the program is interrupted. See libjpeg.doc. - */ diff --git a/libjpegtwrp/filelist.doc b/libjpegtwrp/filelist.doc deleted file mode 100644 index e14982ca5..000000000 --- a/libjpegtwrp/filelist.doc +++ /dev/null @@ -1,210 +0,0 @@ -IJG JPEG LIBRARY: FILE LIST - -Copyright (C) 1994-1998, Thomas G. Lane. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -Here is a road map to the files in the IJG JPEG distribution. The -distribution includes the JPEG library proper, plus two application -programs ("cjpeg" and "djpeg") which use the library to convert JPEG -files to and from some other popular image formats. A third application -"jpegtran" uses the library to do lossless conversion between different -variants of JPEG. There are also two stand-alone applications, -"rdjpgcom" and "wrjpgcom". - - -THE JPEG LIBRARY -================ - -Include files: - -jpeglib.h JPEG library's exported data and function declarations. -jconfig.h Configuration declarations. Note: this file is not present - in the distribution; it is generated during installation. -jmorecfg.h Additional configuration declarations; need not be changed - for a standard installation. -jerror.h Declares JPEG library's error and trace message codes. -jinclude.h Central include file used by all IJG .c files to reference - system include files. -jpegint.h JPEG library's internal data structures. -jchuff.h Private declarations for Huffman encoder modules. -jdhuff.h Private declarations for Huffman decoder modules. -jdct.h Private declarations for forward & reverse DCT subsystems. -jmemsys.h Private declarations for memory management subsystem. -jversion.h Version information. - -Applications using the library should include jpeglib.h (which in turn -includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included -if the application needs to reference individual JPEG error codes. The -other include files are intended for internal use and would not normally -be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, -since its function is to improve portability of the whole IJG distribution. -Most other applications will directly include the system include files they -want, and hence won't need jinclude.h.) - - -C source code files: - -These files contain most of the functions intended to be called directly by -an application program: - -jcapimin.c Application program interface: core routines for compression. -jcapistd.c Application program interface: standard compression. -jdapimin.c Application program interface: core routines for decompression. -jdapistd.c Application program interface: standard decompression. -jcomapi.c Application program interface routines common to compression - and decompression. -jcparam.c Compression parameter setting helper routines. -jctrans.c API and library routines for transcoding compression. -jdtrans.c API and library routines for transcoding decompression. - -Compression side of the library: - -jcinit.c Initialization: determines which other modules to use. -jcmaster.c Master control: setup and inter-pass sequencing logic. -jcmainct.c Main buffer controller (preprocessor => JPEG compressor). -jcprepct.c Preprocessor buffer controller. -jccoefct.c Buffer controller for DCT coefficient buffer. -jccolor.c Color space conversion. -jcsample.c Downsampling. -jcdctmgr.c DCT manager (DCT implementation selection & control). -jfdctint.c Forward DCT using slow-but-accurate integer method. -jfdctfst.c Forward DCT using faster, less accurate integer method. -jfdctflt.c Forward DCT using floating-point arithmetic. -jchuff.c Huffman entropy coding for sequential JPEG. -jcphuff.c Huffman entropy coding for progressive JPEG. -jcmarker.c JPEG marker writing. -jdatadst.c Data destination manager for stdio output. - -Decompression side of the library: - -jdmaster.c Master control: determines which other modules to use. -jdinput.c Input controller: controls input processing modules. -jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). -jdcoefct.c Buffer controller for DCT coefficient buffer. -jdpostct.c Postprocessor buffer controller. -jdmarker.c JPEG marker reading. -jdhuff.c Huffman entropy decoding for sequential JPEG. -jdphuff.c Huffman entropy decoding for progressive JPEG. -jddctmgr.c IDCT manager (IDCT implementation selection & control). -jidctint.c Inverse DCT using slow-but-accurate integer method. -jidctfst.c Inverse DCT using faster, less accurate integer method. -jidctflt.c Inverse DCT using floating-point arithmetic. -jidctred.c Inverse DCTs with reduced-size outputs. -jdsample.c Upsampling. -jdcolor.c Color space conversion. -jdmerge.c Merged upsampling/color conversion (faster, lower quality). -jquant1.c One-pass color quantization using a fixed-spacing colormap. -jquant2.c Two-pass color quantization using a custom-generated colormap. - Also handles one-pass quantization to an externally given map. -jdatasrc.c Data source manager for stdio input. - -Support files for both compression and decompression: - -jerror.c Standard error handling routines (application replaceable). -jmemmgr.c System-independent (more or less) memory management code. -jutils.c Miscellaneous utility routines. - -jmemmgr.c relies on a system-dependent memory management module. The IJG -distribution includes the following implementations of the system-dependent -module: - -jmemnobs.c "No backing store": assumes adequate virtual memory exists. -jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). -jmemname.c Makes temporary files with program-generated file names. -jmemdos.c Custom implementation for MS-DOS (16-bit environment only): - can use extended and expanded memory as well as temp files. -jmemmac.c Custom implementation for Apple Macintosh. - -Exactly one of the system-dependent modules should be configured into an -installed JPEG library (see install.doc for hints about which one to use). -On unusual systems you may find it worthwhile to make a special -system-dependent memory manager. - - -Non-C source code files: - -jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in - MS-DOS-specific configurations of the JPEG library. - - -CJPEG/DJPEG/JPEGTRAN -==================== - -Include files: - -cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. -cderror.h Additional error and trace message codes for cjpeg et al. -transupp.h Declarations for jpegtran support routines in transupp.c. - -C source code files: - -cjpeg.c Main program for cjpeg. -djpeg.c Main program for djpeg. -jpegtran.c Main program for jpegtran. -cdjpeg.c Utility routines used by all three programs. -rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. -rdswitch.c Code to process some of cjpeg's more complex switches. - Also used by jpegtran. -transupp.c Support code for jpegtran: lossless image manipulations. - -Image file reader modules for cjpeg: - -rdbmp.c BMP file input. -rdgif.c GIF file input (now just a stub). -rdppm.c PPM/PGM file input. -rdrle.c Utah RLE file input. -rdtarga.c Targa file input. - -Image file writer modules for djpeg: - -wrbmp.c BMP file output. -wrgif.c GIF file output (a mere shadow of its former self). -wrppm.c PPM/PGM file output. -wrrle.c Utah RLE file output. -wrtarga.c Targa file output. - - -RDJPGCOM/WRJPGCOM -================= - -C source code files: - -rdjpgcom.c Stand-alone rdjpgcom application. -wrjpgcom.c Stand-alone wrjpgcom application. - -These programs do not depend on the IJG library. They do use -jconfig.h and jinclude.h, only to improve portability. - - -ADDITIONAL FILES -================ - -Documentation (see README for a guide to the documentation files): - -README Master documentation file. -*.doc Other documentation files. -*.1 Documentation in Unix man page format. -change.log Version-to-version change highlights. -example.c Sample code for calling JPEG library. - -Configuration/installation files and programs (see install.doc for more info): - -configure Unix shell script to perform automatic configuration. -ltconfig Support scripts for configure (from GNU libtool). -ltmain.sh -config.guess -config.sub -install-sh Install shell script for those Unix systems lacking one. -ckconfig.c Program to generate jconfig.h on non-Unix systems. -jconfig.doc Template for making jconfig.h by hand. -makefile.* Sample makefiles for particular systems. -jconfig.* Sample jconfig.h for particular systems. -ansi2knr.c De-ANSIfier for pre-ANSI C compilers (courtesy of - L. Peter Deutsch and Aladdin Enterprises). - -Test files (see install.doc for test procedure): - -test*.* Source and comparison files for confidence test. - These are binary image files, NOT text files. diff --git a/libjpegtwrp/install-sh b/libjpegtwrp/install-sh deleted file mode 100755 index e8436696c..000000000 --- a/libjpegtwrp/install-sh +++ /dev/null @@ -1,250 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/libjpegtwrp/install.doc b/libjpegtwrp/install.doc deleted file mode 100644 index 3702b986b..000000000 --- a/libjpegtwrp/install.doc +++ /dev/null @@ -1,1063 +0,0 @@ -INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software - -Copyright (C) 1991-1998, Thomas G. Lane. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -This file explains how to configure and install the IJG software. We have -tried to make this software extremely portable and flexible, so that it can be -adapted to almost any environment. The downside of this decision is that the -installation process is complicated. We have provided shortcuts to simplify -the task on common systems. But in any case, you will need at least a little -familiarity with C programming and program build procedures for your system. - -If you are only using this software as part of a larger program, the larger -program's installation procedure may take care of configuring the IJG code. -For example, Ghostscript's installation script will configure the IJG code. -You don't need to read this file if you just want to compile Ghostscript. - -If you are on a Unix machine, you may not need to read this file at all. -Try doing - ./configure - make - make test -If that doesn't complain, do - make install -(better do "make -n install" first to see if the makefile will put the files -where you want them). Read further if you run into snags or want to customize -the code for your system. - - -TABLE OF CONTENTS ------------------ - -Before you start -Configuring the software: - using the automatic "configure" script - using one of the supplied jconfig and makefile files - by hand -Building the software -Testing the software -Installing the software -Optional stuff -Optimization -Hints for specific systems - - -BEFORE YOU START -================ - -Before installing the software you must unpack the distributed source code. -Since you are reading this file, you have probably already succeeded in this -task. However, there is a potential for error if you needed to convert the -files to the local standard text file format (for example, if you are on -MS-DOS you may have converted LF end-of-line to CR/LF). You must apply -such conversion to all the files EXCEPT those whose names begin with "test". -The test files contain binary data; if you change them in any way then the -self-test will give bad results. - -Please check the last section of this file to see if there are hints for the -specific machine or compiler you are using. - - -CONFIGURING THE SOFTWARE -======================== - -To configure the IJG code for your system, you need to create two files: - * jconfig.h: contains values for system-dependent #define symbols. - * Makefile: controls the compilation process. -(On a non-Unix machine, you may create "project files" or some other -substitute for a Makefile. jconfig.h is needed in any environment.) - -We provide three different ways to generate these files: - * On a Unix system, you can just run the "configure" script. - * We provide sample jconfig files and makefiles for popular machines; - if your machine matches one of the samples, just copy the right sample - files to jconfig.h and Makefile. - * If all else fails, read the instructions below and make your own files. - - -Configuring the software using the automatic "configure" script ---------------------------------------------------------------- - -If you are on a Unix machine, you can just type - ./configure -and let the configure script construct appropriate configuration files. -If you're using "csh" on an old version of System V, you might need to type - sh configure -instead to prevent csh from trying to execute configure itself. -Expect configure to run for a few minutes, particularly on slower machines; -it works by compiling a series of test programs. - -Configure was created with GNU Autoconf and it follows the usual conventions -for GNU configure scripts. It makes a few assumptions that you may want to -override. You can do this by providing optional switches to configure: - -* If you want to build libjpeg as a shared library, say - ./configure --enable-shared -To get both shared and static libraries, say - ./configure --enable-shared --enable-static -Note that these switches invoke GNU libtool to take care of system-dependent -shared library building methods. If things don't work this way, please try -running configure without either switch; that should build a static library -without using libtool. If that works, your problem is probably with libtool -not with the IJG code. libtool is fairly new and doesn't support all flavors -of Unix yet. (You might be able to find a newer version of libtool than the -one included with libjpeg; see ftp.gnu.org. Report libtool problems to -bug-libtool@gnu.org.) - -* Configure will use gcc (GNU C compiler) if it's available, otherwise cc. -To force a particular compiler to be selected, use the CC option, for example - ./configure CC='cc' -The same method can be used to include any unusual compiler switches. -For example, on HP-UX you probably want to say - ./configure CC='cc -Aa' -to get HP's compiler to run in ANSI mode. - -* The default CFLAGS setting is "-O" for non-gcc compilers, "-O2" for gcc. -You can override this by saying, for example, - ./configure CFLAGS='-g' -if you want to compile with debugging support. - -* Configure will set up the makefile so that "make install" will install files -into /usr/local/bin, /usr/local/man, etc. You can specify an installation -prefix other than "/usr/local" by giving configure the option "--prefix=PATH". - -* If you don't have a lot of swap space, you may need to enable the IJG -software's internal virtual memory mechanism. To do this, give the option -"--enable-maxmem=N" where N is the default maxmemory limit in megabytes. -This is discussed in more detail under "Selecting a memory manager", below. -You probably don't need to worry about this on reasonably-sized Unix machines, -unless you plan to process very large images. - -Configure has some other features that are useful if you are cross-compiling -or working in a network of multiple machine types; but if you need those -features, you probably already know how to use them. - - -Configuring the software using one of the supplied jconfig and makefile files ------------------------------------------------------------------------------ - -If you have one of these systems, you can just use the provided configuration -files: - -Makefile jconfig file System and/or compiler - -makefile.manx jconfig.manx Amiga, Manx Aztec C -makefile.sas jconfig.sas Amiga, SAS C -makeproj.mac jconfig.mac Apple Macintosh, Metrowerks CodeWarrior -mak*jpeg.st jconfig.st Atari ST/STE/TT, Pure C or Turbo C -makefile.bcc jconfig.bcc MS-DOS or OS/2, Borland C -makefile.dj jconfig.dj MS-DOS, DJGPP (Delorie's port of GNU C) -makefile.mc6 jconfig.mc6 MS-DOS, Microsoft C (16-bit only) -makefile.wat jconfig.wat MS-DOS, OS/2, or Windows NT, Watcom C -makefile.vc jconfig.vc Windows NT/95, MS Visual C++ -make*.ds jconfig.vc Windows NT/95, MS Developer Studio -makefile.mms jconfig.vms Digital VMS, with MMS software -makefile.vms jconfig.vms Digital VMS, without MMS software - -Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or -whatever your system uses as the standard makefile name). For more info see -the appropriate system-specific hints section near the end of this file. - - -Configuring the software by hand --------------------------------- - -First, generate a jconfig.h file. If you are moderately familiar with C, -the comments in jconfig.doc should be enough information to do this; just -copy jconfig.doc to jconfig.h and edit it appropriately. Otherwise, you may -prefer to use the ckconfig.c program. You will need to compile and execute -ckconfig.c by hand --- we hope you know at least enough to do that. -ckconfig.c may not compile the first try (in fact, the whole idea is for it -to fail if anything is going to). If you get compile errors, fix them by -editing ckconfig.c according to the directions given in ckconfig.c. Once -you get it to run, it will write a suitable jconfig.h file, and will also -print out some advice about which makefile to use. - -You may also want to look at the canned jconfig files, if there is one for a -system similar to yours. - -Second, select a makefile and copy it to Makefile (or whatever your system -uses as the standard makefile name). The most generic makefiles we provide -are - makefile.ansi: if your C compiler supports function prototypes - makefile.unix: if not. -(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES" -in jconfig.h.) You may want to start from one of the other makefiles if -there is one for a system similar to yours. - -Look over the selected Makefile and adjust options as needed. In particular -you may want to change the CC and CFLAGS definitions. For instance, if you -are using GCC, set CC=gcc. If you had to use any compiler switches to get -ckconfig.c to work, make sure the same switches are in CFLAGS. - -If you are on a system that doesn't use makefiles, you'll need to set up -project files (or whatever you do use) to compile all the source files and -link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom. -See the file lists in any of the makefiles to find out which files go into -each program. Note that the provided makefiles all make a "library" file -libjpeg first, but you don't have to do that if you don't want to; the file -lists identify which source files are actually needed for compression, -decompression, or both. As a last resort, you can make a batch script that -just compiles everything and links it all together; makefile.vms is an example -of this (it's for VMS systems that have no make-like utility). - -Here are comments about some specific configuration decisions you'll -need to make: - -Command line style ------------------- - -These programs can use a Unix-like command line style which supports -redirection and piping, like this: - cjpeg inputfile >outputfile - cjpeg outputfile - source program | cjpeg >outputfile -The simpler "two file" command line style is just - cjpeg inputfile outputfile -You may prefer the two-file style, particularly if you don't have pipes. - -You MUST use two-file style on any system that doesn't cope well with binary -data fed through stdin/stdout; this is true for some MS-DOS compilers, for -example. If you're not on a Unix system, it's safest to assume you need -two-file style. (But if your compiler provides either the Posix-standard -fdopen() library routine or a Microsoft-compatible setmode() routine, you -can safely use the Unix command line style, by defining USE_FDOPEN or -USE_SETMODE respectively.) - -To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE". - -Selecting a memory manager --------------------------- - -The IJG code is capable of working on images that are too big to fit in main -memory; data is swapped out to temporary files as necessary. However, the -code to do this is rather system-dependent. We provide five different -memory managers: - -* jmemansi.c This version uses the ANSI-standard library routine tmpfile(), - which not all non-ANSI systems have. On some systems - tmpfile() may put the temporary file in a non-optimal - location; if you don't like what it does, use jmemname.c. - -* jmemname.c This version creates named temporary files. For anything - except a Unix machine, you'll need to configure the - select_file_name() routine appropriately; see the comments - near the head of jmemname.c. If you use this version, define - NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files - are removed if the program is aborted. - -* jmemnobs.c (That stands for No Backing Store :-).) This will compile on - almost any system, but it assumes you have enough main memory - or virtual memory to hold the biggest images you work with. - -* jmemdos.c This should be used with most 16-bit MS-DOS compilers. - See the system-specific notes about MS-DOS for more info. - IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in - jconfig.h, and include the assembly file jmemdosa.asm in the - programs. The supplied makefiles and jconfig files for - 16-bit MS-DOS compilers already do both. - -* jmemmac.c Custom version for Apple Macintosh; see the system-specific - notes for Macintosh for more info. - -To use a particular memory manager, change the SYSDEPMEM variable in your -makefile to equal the corresponding object file name (for example, jmemansi.o -or jmemansi.obj for jmemansi.c). - -If you have plenty of (real or virtual) main memory, just use jmemnobs.c. -"Plenty" means about ten bytes for every pixel in the largest images -you plan to process, so a lot of systems don't meet this criterion. -If yours doesn't, try jmemansi.c first. If that doesn't compile, you'll have -to use jmemname.c; be sure to adjust select_file_name() for local conditions. -You may also need to change unlink() to remove() in close_backing_store(). - -Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM -setting to a reasonable value for your system (either by adding a #define for -DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile). -This value limits the amount of data space the program will attempt to -allocate. Code and static data space isn't counted, so the actual memory -needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory -setting. Larger max-memory settings reduce the amount of I/O needed to -process a large image, but too large a value can result in "insufficient -memory" failures. On most Unix machines (and other systems with virtual -memory), just set DEFAULT_MAX_MEM to several million and forget it. At the -other end of the spectrum, for MS-DOS machines you probably can't go much -above 300K to 400K. (On MS-DOS the value refers to conventional memory only. -Extended/expanded memory is handled separately by jmemdos.c.) - - -BUILDING THE SOFTWARE -===================== - -Now you should be able to compile the software. Just say "make" (or -whatever's necessary to start the compilation). Have a cup of coffee. - -Here are some things that could go wrong: - -If your compiler complains about undefined structures, you should be able to -shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h. - -If you have trouble with missing system include files or inclusion of the -wrong ones, read jinclude.h. This shouldn't happen if you used configure -or ckconfig.c to set up jconfig.h. - -There are a fair number of routines that do not use all of their parameters; -some compilers will issue warnings about this, which you can ignore. There -are also a few configuration checks that may give "unreachable code" warnings. -Any other warning deserves investigation. - -If you don't have a getenv() library routine, define NO_GETENV. - -Also see the system-specific hints, below. - - -TESTING THE SOFTWARE -==================== - -As a quick test of functionality we've included a small sample image in -several forms: - testorig.jpg Starting point for the djpeg tests. - testimg.ppm The output of djpeg testorig.jpg - testimg.bmp The output of djpeg -bmp -colors 256 testorig.jpg - testimg.jpg The output of cjpeg testimg.ppm - testprog.jpg Progressive-mode equivalent of testorig.jpg. - testimgp.jpg The output of cjpeg -progressive -optimize testimg.ppm -(The first- and second-generation .jpg files aren't identical since JPEG is -lossy.) If you can generate duplicates of the testimg* files then you -probably have working programs. - -With most of the makefiles, "make test" will perform the necessary -comparisons. - -If you're using a makefile that doesn't provide the test option, run djpeg -and cjpeg by hand and compare the output files to testimg* with whatever -binary file comparison tool you have. The files should be bit-for-bit -identical. - -If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you -need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t. -Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h. A less likely -configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE -as long should take care of that one. - -If the cjpeg test run fails with "Missing Huffman code table entry", it's a -good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED. Go back to the -configuration step and run ckconfig.c. (This is a good plan for any other -test failure, too.) - -If you are using Unix (one-file) command line style on a non-Unix system, -it's a good idea to check that binary I/O through stdin/stdout actually -works. You should get the same results from "djpeg out.ppm" -as from "djpeg -outfile out.ppm testorig.jpg". Note that the makefiles all -use the latter style and therefore do not exercise stdin/stdout! If this -check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined. -If it still doesn't work, better use two-file style. - -If you chose a memory manager other than jmemnobs.c, you should test that -temporary-file usage works. Try "djpeg -bmp -colors 256 -max 0 testorig.jpg" -and make sure its output matches testimg.bmp. If you have any really large -images handy, try compressing them with -optimize and/or decompressing with --colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large. - -NOTE: this is far from an exhaustive test of the JPEG software; some modules, -such as 1-pass color quantization, are not exercised at all. It's just a -quick test to give you some confidence that you haven't missed something -major. - - -INSTALLING THE SOFTWARE -======================= - -Once you're done with the above steps, you can install the software by -copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom) -to wherever you normally install programs. On Unix systems, you'll also want -to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1) -in the man-page directory. The pre-fab makefiles don't support this step -since there's such a wide variety of installation procedures on different -systems. - -If you generated a Makefile with the "configure" script, you can just say - make install -to install the programs and their man pages into the standard places. -(You'll probably need to be root to do this.) We recommend first saying - make -n install -to see where configure thought the files should go. You may need to edit -the Makefile, particularly if your system's conventions for man page -filenames don't match what configure expects. - -If you want to install the IJG library itself, for use in compiling other -programs besides ours, then you need to put the four include files - jpeglib.h jerror.h jconfig.h jmorecfg.h -into your include-file directory, and put the library file libjpeg.a -(extension may vary depending on system) wherever library files go. -If you generated a Makefile with "configure", it will do what it thinks -is the right thing if you say - make install-lib - - -OPTIONAL STUFF -============== - -Progress monitor: - -If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display -of percent-done progress reports. The routine provided in cdjpeg.c merely -prints percentages to stderr, but you can customize it to do something -fancier. - -Utah RLE file format support: - -We distribute the software with support for RLE image files (Utah Raster -Toolkit format) disabled, because the RLE support won't compile without the -Utah library. If you have URT version 3.1 or later, you can enable RLE -support as follows: - 1. #define RLE_SUPPORTED in jconfig.h. - 2. Add a -I option to CFLAGS in the Makefile for the directory - containing the URT .h files (typically the "include" - subdirectory of the URT distribution). - 3. Add -L... -lrle to LDLIBS in the Makefile, where ... specifies - the directory containing the URT "librle.a" file (typically the - "lib" subdirectory of the URT distribution). - -Support for 12-bit-deep pixel data: - -The JPEG standard allows either 8-bit or 12-bit data precision. (For color, -this means 8 or 12 bits per channel, of course.) If you need to work with -deeper than 8-bit data, you can compile the IJG code for 12-bit operation. -To do so: - 1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8. - 2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED, - because the code for those formats doesn't handle 12-bit data and won't - even compile. (The PPM code does work, as explained below. The GIF - code works too; it scales 8-bit GIF data to and from 12-bit depth - automatically.) - 3. Compile. Don't expect "make test" to pass, since the supplied test - files are for 8-bit data. - -Currently, 12-bit support does not work on 16-bit-int machines. - -Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa; -so you'll want to keep around a regular 8-bit compilation as well. -(Run-time selection of data depth, to allow a single copy that does both, -is possible but would probably slow things down considerably; it's very low -on our to-do list.) - -The PPM reader (rdppm.c) can read 12-bit data from either text-format or -binary-format PPM and PGM files. Binary-format PPM/PGM files which have a -maxval greater than 255 are assumed to use 2 bytes per sample, LSB first -(little-endian order). As of early 1995, 2-byte binary format is not -officially supported by the PBMPLUS library, but it is expected that a -future release of PBMPLUS will support it. Note that the PPM reader will -read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming -data is automatically rescaled to either maxval=255 or maxval=4095 as -appropriate for the cjpeg bit depth. - -The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM -format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12. Since this -format is not yet widely supported, you can disable it by compiling wrppm.c -with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a -standard 1-byte/sample PPM or PGM file. (Yes, this means still another copy -of djpeg to keep around. But hopefully you won't need it for very long. -Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.) - -Of course, if you are working with 12-bit data, you probably have it stored -in some other, nonstandard format. In that case you'll probably want to -write your own I/O modules to read and write your format. - -Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in -order to generate valid Huffman tables. This is necessary because our -default Huffman tables only cover 8-bit data. - -Removing code: - -If you need to make a smaller version of the JPEG software, some optional -functions can be removed at compile time. See the xxx_SUPPORTED #defines in -jconfig.h and jmorecfg.h. If at all possible, we recommend that you leave in -decoder support for all valid JPEG files, to ensure that you can read anyone's -output. Taking out support for image file formats that you don't use is the -most painless way to make the programs smaller. Another possibility is to -remove some of the DCT methods: in particular, the "IFAST" method may not be -enough faster than the others to be worth keeping on your machine. (If you -do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST -to a supported method, by adding a #define in jconfig.h.) - - -OPTIMIZATION -============ - -Unless you own a Cray, you'll probably be interested in making the JPEG -software go as fast as possible. This section covers some machine-dependent -optimizations you may want to try. We suggest that before trying any of -this, you first get the basic installation to pass the self-test step. -Repeat the self-test after any optimization to make sure that you haven't -broken anything. - -The integer DCT routines perform a lot of multiplications. These -multiplications must yield 32-bit results, but none of their input values -are more than 16 bits wide. On many machines, notably the 680x0 and 80x86 -CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32 -bit multiply. Unfortunately there is no portable way to specify such a -multiplication in C, but some compilers can generate one when you use the -right combination of casts. See the MULTIPLYxxx macro definitions in -jdct.h. If your compiler makes "int" be 32 bits and "short" be 16 bits, -defining SHORTxSHORT_32 is fairly likely to work. When experimenting with -alternate definitions, be sure to test not only whether the code still works -(use the self-test), but also whether it is actually faster --- on some -compilers, alternate definitions may compute the right answer, yet be slower -than the default. Timing cjpeg on a large PGM (grayscale) input file is the -best way to check this, as the DCT will be the largest fraction of the runtime -in that mode. (Note: some of the distributed compiler-specific jconfig files -already contain #define switches to select appropriate MULTIPLYxxx -definitions.) - -If your machine has sufficiently fast floating point hardware, you may find -that the float DCT method is faster than the integer DCT methods, even -after tweaking the integer multiply macros. In that case you may want to -make the float DCT be the default method. (The only objection to this is -that float DCT results may vary slightly across machines.) To do that, add -"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h. Even if you don't change -the default, you should redefine JDCT_FASTEST, which is the method selected -by djpeg's -fast switch. Don't forget to update the documentation files -(usage.doc and/or cjpeg.1, djpeg.1) to agree with what you've done. - -If access to "short" arrays is slow on your machine, it may be a win to -define type JCOEF as int rather than short. This will cost a good deal of -memory though, particularly in some multi-pass modes, so don't do it unless -you have memory to burn and short is REALLY slow. - -If your compiler can compile function calls in-line, make sure the INLINE -macro in jmorecfg.h is defined as the keyword that marks a function -inline-able. Some compilers have a switch that tells the compiler to inline -any function it thinks is profitable (e.g., -finline-functions for gcc). -Enabling such a switch is likely to make the compiled code bigger but faster. - -In general, it's worth trying the maximum optimization level of your compiler, -and experimenting with any optional optimizations such as loop unrolling. -(Unfortunately, far too many compilers have optimizer bugs ... be prepared to -back off if the code fails self-test.) If you do any experimentation along -these lines, please report the optimal settings to jpeg-info@uunet.uu.net so -we can mention them in future releases. Be sure to specify your machine and -compiler version. - - -HINTS FOR SPECIFIC SYSTEMS -========================== - -We welcome reports on changes needed for systems not mentioned here. Submit -'em to jpeg-info@uunet.uu.net. Also, if configure or ckconfig.c is wrong -about how to configure the JPEG software for your system, please let us know. - - -Acorn RISC OS: - -(Thanks to Simon Middleton for these hints on compiling with Desktop C.) -After renaming the files according to Acorn conventions, take a copy of -makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and -change these definitions as indicated: - -CFLAGS= -throwback -IC: -Wn -LDLIBS=C:o.Stubs -SYSDEPMEM=jmemansi.o -LN=Link -AR=LibFile -c -o - -Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'. Remove the -lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h' -dependency section. - -Copy jconfig.doc to jconfig.h. Edit jconfig.h to define TWO_FILE_COMMANDLINE -and CHAR_IS_UNSIGNED. - -Run the makefile using !AMU not !Make. If you want to use the 'clean' and -'test' makefile entries then you will have to fiddle with the syntax a bit -and rename the test files. - - -Amiga: - -SAS C 6.50 reportedly is too buggy to compile the IJG code properly. -A patch to update to 6.51 is available from SAS or AmiNet FTP sites. - -The supplied config files are set up to use jmemname.c as the memory -manager, with temporary files being created on the device named by -"JPEGTMP:". - - -Atari ST/STE/TT: - -Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st -to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively. The -project files should work as-is with Pure C. For Turbo C, change library -filenames "pc..." to "tc..." in each project file. Note that libjpeg.prj -selects jmemansi.c as the recommended memory manager. You'll probably want to -adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K -less than your normal free memory. Put "#define DEFAULT_MAX_MEM nnnn" into -jconfig.h to do this. - -To use the 68881/68882 coprocessor for the floating point DCT, add the -compiler option "-8" to the project files and replace pcfltlib.lib with -pc881lib.lib in cjpeg.prj and djpeg.prj. Or if you don't have a -coprocessor, you may prefer to remove the float DCT code by undefining -DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float -code will be too slow to be useful). In that case, you can delete -pcfltlib.lib from the project files. - -Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp, -or jpegtran.ttp. You'll have to perform the self-test by hand. - -We haven't bothered to include project files for rdjpgcom and wrjpgcom. -Those source files should just be compiled by themselves; they don't -depend on the JPEG library. - -There is a bug in some older versions of the Turbo C library which causes the -space used by temporary files created with "tmpfile()" not to be freed after -an abnormal program exit. If you check your disk afterwards, you will find -cluster chains that are allocated but not used by a file. This should not -happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly -close temp files before exiting. But if you use the JPEG library with your -own code, be sure to supply a signal catcher, or else use a different -system-dependent memory manager. - - -Cray: - -Should you be so fortunate as to be running JPEG on a Cray YMP, there is a -compiler bug in old versions of Cray's Standard C (prior to 3.1). If you -still have an old compiler, you'll need to insert a line reading -"#pragma novector" just before the loop - for (i = 1; i <= (int) htbl->bits[l]; i++) - huffsize[p++] = (char) l; -in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c). -[This bug may or may not still occur with the current IJG code, but it's -probably a dead issue anyway...] - - -HP-UX: - -If you have HP-UX 7.05 or later with the "software development" C compiler, -you should run the compiler in ANSI mode. If using the configure script, -say - ./configure CC='cc -Aa' -(or -Ae if you prefer). If configuring by hand, use makefile.ansi and add -"-Aa" to the CFLAGS line in the makefile. - -If you have a pre-7.05 system, or if you are using the non-ANSI C compiler -delivered with a minimum HP-UX system, then you must use makefile.unix -(and do NOT add -Aa); or just run configure without the CC option. - -On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior -to A.08.07. If you get complaints about "not a typedef name", you'll have to -use makefile.unix, or run configure without the CC option. - - -Macintosh, generic comments: - -The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to -provide a Unix-style command line interface. You can use this interface on -the Mac by means of the ccommand() library routine provided by Metrowerks -CodeWarrior or Think C. This is only appropriate for testing the library, -however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want -to develop a Mac-style user interface. There isn't a complete example -available at the moment, but there are some helpful starting points: -1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to -JPEG under System 7 and later. This only illustrates how to use the -compression half of the library, but it does a very nice job of that part. -The CodeWarrior source code is available from http://www.pobox.com/~jsam. -2. Jim Brunner prepared a Mac-style user interface for both compression and -decompression. Unfortunately, it hasn't been updated since IJG v4, and -the library's API has changed considerably since then. Still it may be of -some help, particularly as a guide to compiling the IJG code under Think C. -Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu -or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx. - -jmemmac.c is the recommended memory manager back end for Macintosh. It uses -NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific -implementation of jpeg_mem_available(). It also creates temporary files that -follow Mac conventions. (That part of the code relies on System-7-or-later OS -functions. See the comments in jmemmac.c if you need to run it on System 6.) -NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c. - -You can also use jmemnobs.c, if you don't care about handling images larger -than available memory. If you use any memory manager back end other than -jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and -"DisposePtr", because Mac C libraries often have peculiar implementations of -malloc/free. (For instance, free() may not return the freed space to the -Mac Memory Manager. This is undesirable for the IJG code because jmemmgr.c -already clumps space requests.) - - -Macintosh, Metrowerks CodeWarrior: - -The Unix-command-line-style interface can be used by defining USE_CCOMMAND. -You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout. -This means that when using the cjpeg/djpeg programs, you'll have to type the -input and output file names in the "Arguments" text-edit box, rather than -using the file radio buttons. (Perhaps USE_FDOPEN or USE_SETMODE would -eliminate the problem, but I haven't heard from anyone who's tried it.) - -On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended -float. jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power -of 2. Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. - -The supplied configuration file jconfig.mac can be used for your jconfig.h; -it includes all the recommended symbol definitions. If you have AppleScript -installed, you can run the supplied script makeproj.mac to create CodeWarrior -project files for the library and the testbed applications, then build the -library and applications. (Thanks to Dan Sears and Don Agro for this nifty -hack, which saves us from trying to maintain CodeWarrior project files as part -of the IJG distribution...) - - -Macintosh, Think C: - -The documentation in Jim Brunner's "JPEG Convert" source code (see above) -includes detailed build instructions for Think C; it's probably somewhat -out of date for the current release, but may be helpful. - -If you want to build the minimal command line version, proceed as follows. -You'll have to prepare project files for the programs; we don't include any -in the distribution since they are not text files. Use the file lists in -any of the supplied makefiles as a guide. Also add the ANSI and Unix C -libraries in a separate segment. You may need to divide the JPEG files into -more than one segment; we recommend dividing compression and decompression -modules. Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is -called. You must also define TWO_FILE_COMMANDLINE because stdin/stdout -don't handle binary data correctly. - -On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float. -jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2. -Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint. - -jconfig.mac should work as a jconfig.h configuration file for Think C, -but the makeproj.mac AppleScript script is specific to CodeWarrior. Sorry. - - -MIPS R3000: - -MIPS's cc version 1.31 has a rather nasty optimization bug. Don't use -O -if you have that compiler version. (Use "cc -V" to check the version.) -Note that the R3000 chip is found in workstations from DEC and others. - - -MS-DOS, generic comments for 16-bit compilers: - -The IJG code is designed to work well in 80x86 "small" or "medium" memory -models (i.e., data pointers are 16 bits unless explicitly declared "far"; -code pointers can be either size). You may be able to use small model to -compile cjpeg or djpeg by itself, but you will probably have to use medium -model for any larger application. This won't make much difference in -performance. You *will* take a noticeable performance hit if you use a -large-data memory model, and you should avoid "huge" model if at all -possible. Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use -a small-data memory model; be sure it is NOT defined if you use a large-data -model. (The supplied makefiles and jconfig files for Borland and Microsoft C -compile in medium model and define NEED_FAR_POINTERS.) - -The DOS-specific memory manager, jmemdos.c, should be used if possible. -It needs some assembly-code routines which are in jmemdosa.asm; make sure -your makefile assembles that file and includes it in the library. If you -don't have a suitable assembler, you can get pre-assembled object files for -jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip. (DOS-oriented -distributions of the IJG source code often include these object files.) - -When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set -MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value). If your -C library's far-heap malloc() can't allocate blocks that large, reduce -MAX_ALLOC_CHUNK to whatever it can handle. - -If you can't use jmemdos.c for some reason --- for example, because you -don't have an assembler to assemble jmemdosa.asm --- you'll have to fall -back to jmemansi.c or jmemname.c. You'll probably still need to set -MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc() -more than 64K at a time. IMPORTANT: if you use jmemansi.c or jmemname.c, -you will have to compile in a large-data memory model in order to get the -right stdio library. Too bad. - -wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB -work area to hold the comment text. If your C library's malloc can't -handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c. - -Most MS-DOS compilers treat stdin/stdout as text files, so you must use -two-file command line style. But if your compiler has either fdopen() or -setmode(), you can use one-file style if you like. To do this, define -USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode. -(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.) You -should test that I/O through stdin/stdout produces the same results as I/O -to explicitly named files... the "make test" procedures in the supplied -makefiles do NOT use stdin/stdout. - - -MS-DOS, generic comments for 32-bit compilers: - -None of the above comments about memory models apply if you are using a -32-bit flat-memory-space environment, such as DJGPP or Watcom C. (And you -should use one if you have it, as performance will be much better than -8086-compatible code!) For flat-memory-space compilers, do NOT define -NEED_FAR_POINTERS, and do NOT use jmemdos.c. Use jmemnobs.c if the -environment supplies adequate virtual memory, otherwise use jmemansi.c or -jmemname.c. - -You'll still need to be careful about binary I/O through stdin/stdout. -See the last paragraph of the previous section. - - -MS-DOS, Borland C: - -Be sure to convert all the source files to DOS text format (CR/LF newlines). -Although Borland C will often work OK with unmodified Unix (LF newlines) -source files, sometimes it will give bogus compile errors. -"Illegal character '#'" is the most common such error. (This is true with -Borland C 3.1, but perhaps is fixed in newer releases.) - -If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. -jconfig.bcc already includes #define USE_SETMODE to make this work. -(fdopen does not work correctly.) - - -MS-DOS, Microsoft C: - -makefile.mc6 works with Microsoft C, DOS Visual C++, etc. It should only -be used if you want to build a 16-bit (small or medium memory model) program. - -If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE. -jconfig.mc6 already includes #define USE_SETMODE to make this work. -(fdopen does not work correctly.) - -Note that this makefile assumes that the working copy of itself is called -"makefile". If you want to call it something else, say "makefile.mak", -be sure to adjust the dependency line that reads "$(RFILE) : makefile". -Otherwise the make will fail because it doesn't know how to create "makefile". -Worse, some releases of Microsoft's make utilities give an incorrect error -message in this situation. - -Old versions of MS C fail with an "out of macro expansion space" error -because they can't cope with the macro TRACEMS8 (defined in jerror.h). -If this happens to you, the easiest solution is to change TRACEMS8 to -expand to nothing. You'll lose the ability to dump out JPEG coefficient -tables with djpeg -debug -debug, but at least you can compile. - -Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn -off optimization entirely (remove -O from CFLAGS). 6.00A is better, but it -still generates bad code if you enable loop optimizations (-Ol or -Ox). - -MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ... -which is on by default. To work around this bug, compile that one file -with /Oo-. - - -Microsoft Windows (all versions), generic comments: - -Some Windows system include files define typedef boolean as "unsigned char". -The IJG code also defines typedef boolean, but we make it "int" by default. -This doesn't affect the IJG programs because we don't import those Windows -include files. But if you use the JPEG library in your own program, and some -of your program's files import one definition of boolean while some import the -other, you can get all sorts of mysterious problems. A good preventive step -is to make the IJG library use "unsigned char" for boolean. To do that, -add something like this to your jconfig.h file: - /* Define "boolean" as unsigned char, not int, per Windows custom */ - #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ - typedef unsigned char boolean; - #endif - #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ -(This is already in jconfig.vc, by the way.) - -windef.h contains the declarations - #define far - #define FAR far -Since jmorecfg.h tries to define FAR as empty, you may get a compiler -warning if you include both jpeglib.h and windef.h (which windows.h -includes). To suppress the warning, you can put "#ifndef FAR"/"#endif" -around the line "#define FAR" in jmorecfg.h. - -When using the library in a Windows application, you will almost certainly -want to modify or replace the error handler module jerror.c, since our -default error handler does a couple of inappropriate things: - 1. it tries to write error and warning messages on stderr; - 2. in event of a fatal error, it exits by calling exit(). - -A simple stopgap solution for problem 1 is to replace the line - fprintf(stderr, "%s\n", buffer); -(in output_message in jerror.c) with - MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR); -It's highly recommended that you at least do that much, since otherwise -error messages will disappear into nowhere. (Beginning with IJG v6b, this -code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in -jconfig.h to enable it.) - -The proper solution for problem 2 is to return control to your calling -application after a library error. This can be done with the setjmp/longjmp -technique discussed in libjpeg.doc and illustrated in example.c. (NOTE: -some older Windows C compilers provide versions of setjmp/longjmp that -don't actually work under Windows. You may need to use the Windows system -functions Catch and Throw instead.) - -The recommended memory manager under Windows is jmemnobs.c; in other words, -let Windows do any virtual memory management needed. You should NOT use -jmemdos.c nor jmemdosa.asm under Windows. - -For Windows 3.1, we recommend compiling in medium or large memory model; -for newer Windows versions, use a 32-bit flat memory model. (See the MS-DOS -sections above for more info about memory models.) In the 16-bit memory -models only, you'll need to put - #define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ -into jconfig.h to limit allocation chunks to 64Kb. (Without that, you'd -have to use huge memory model, which slows things down unnecessarily.) -jmemnobs.c works without modification in large or flat memory models, but to -use medium model, you need to modify its jpeg_get_large and jpeg_free_large -routines to allocate far memory. In any case, you might like to replace -its calls to malloc and free with direct calls on Windows memory allocation -functions. - -You may also want to modify jdatasrc.c and jdatadst.c to use Windows file -operations rather than fread/fwrite. This is only necessary if your C -compiler doesn't provide a competent implementation of C stdio functions. - -You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library -will accept or deliver color pixels in BGR sample order, not RGB; BGR order -is usually more convenient under Windows. Note that this change will break -the sample applications cjpeg/djpeg, but the library itself works fine. - - -Many people want to convert the IJG library into a DLL. This is reasonably -straightforward, but watch out for the following: - - 1. Don't try to compile as a DLL in small or medium memory model; use -large model, or even better, 32-bit flat model. Many places in the IJG code -assume the address of a local variable is an ordinary (not FAR) pointer; -that isn't true in a medium-model DLL. - - 2. Microsoft C cannot pass file pointers between applications and DLLs. -(See Microsoft Knowledge Base, PSS ID Number Q50336.) So jdatasrc.c and -jdatadst.c don't work if you open a file in your application and then pass -the pointer to the DLL. One workaround is to make jdatasrc.c/jdatadst.c -part of your main application rather than part of the DLL. - - 3. You'll probably need to modify the macros GLOBAL() and EXTERN() to -attach suitable linkage keywords to the exported routine names. Similarly, -you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers -are declared in a way that lets application routines be called back through -the function pointers. These macros are in jmorecfg.h. Typical definitions -for a 16-bit DLL are: - #define GLOBAL(type) type _far _pascal _loadds _export - #define EXTERN(type) extern type _far _pascal _loadds - #define METHODDEF(type) static type _far _pascal - #define JMETHOD(type,methodname,arglist) \ - type (_far _pascal *methodname) arglist -For a 32-bit DLL you may want something like - #define GLOBAL(type) __declspec(dllexport) type - #define EXTERN(type) extern __declspec(dllexport) type -Although not all the GLOBAL routines are actually intended to be called by -the application, the performance cost of making them all DLL entry points is -negligible. - -The unmodified IJG library presents a very C-specific application interface, -so the resulting DLL is only usable from C or C++ applications. There has -been some talk of writing wrapper code that would present a simpler interface -usable from other languages, such as Visual Basic. This is on our to-do list -but hasn't been very high priority --- any volunteers out there? - - -Microsoft Windows, Borland C: - -The provided jconfig.bcc should work OK in a 32-bit Windows environment, -but you'll need to tweak it in a 16-bit environment (you'd need to define -NEED_FAR_POINTERS and MAX_ALLOC_CHUNK). Beware that makefile.bcc will need -alteration if you want to use it for Windows --- in particular, you should -use jmemnobs.c not jmemdos.c under Windows. - -Borland C++ 4.5 fails with an internal compiler error when trying to compile -jdmerge.c in 32-bit mode. If enough people complain, perhaps Borland will fix -it. In the meantime, the simplest known workaround is to add a redundant -definition of the variable range_limit in h2v1_merged_upsample(), at the head -of the block that handles odd image width (about line 268 in v6 jdmerge.c): - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */ - cb = GETJSAMPLE(*inptr1); -Pretty bizarre, especially since the very similar routine h2v2_merged_upsample -doesn't trigger the bug. -Recent reports suggest that this bug does not occur with "bcc32a" (the -Pentium-optimized version of the compiler). - -Another report from a user of Borland C 4.5 was that incorrect code (leading -to a color shift in processed images) was produced if any of the following -optimization switch combinations were used: - -Ot -Og - -Ot -Op - -Ot -Om -So try backing off on optimization if you see such a problem. (Are there -several different releases all numbered "4.5"??) - - -Microsoft Windows, Microsoft Visual C++: - -jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory -model. makefile.vc is intended for command-line use. (If you are using -the Developer Studio environment, you may prefer the DevStudio project -files; see below.) - -Some users feel that it's easier to call the library from C++ code if you -force VC++ to treat the library as C++ code, which you can do by renaming -all the *.c files to *.cpp (and adjusting the makefile to match). This -avoids the need to put extern "C" { ... } around #include "jpeglib.h" in -your C++ application. - - -Microsoft Windows, Microsoft Developer Studio: - -We include makefiles that should work as project files in DevStudio 4.2 or -later. There is a library makefile that builds the IJG library as a static -Win32 library, and an application makefile that builds the sample applications -as Win32 console applications. (Even if you only want the library, we -recommend building the applications so that you can run the self-test.) - -To use: -1. Copy jconfig.vc to jconfig.h, makelib.ds to jpeg.mak, and - makeapps.ds to apps.mak. (Note that the renaming is critical!) -2. Click on the .mak files to construct project workspaces. - (If you are using DevStudio more recent than 4.2, you'll probably - get a message saying that the makefiles are being updated.) -3. Build the library project, then the applications project. -4. Move the application .exe files from `app`\Release to an - appropriate location on your path. -5. To perform the self-test, execute the command line - NMAKE /f makefile.vc test - - -OS/2, Borland C++: - -Watch out for optimization bugs in older Borland compilers; you may need -to back off the optimization switch settings. See the comments in -makefile.bcc. - - -SGI: - -On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile. -If you are using configure, you can do this by saying - ./configure RANLIB='ar -ts' -This change is not needed on all SGIs. Use it only if the make fails at the -stage of linking the completed programs. - -On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2" -reportedly speeds up the float DCT method substantially, enough to make it -faster than the default int method (but still slower than the fast int -method). If you use -mips2, you may want to alter the default DCT method to -be float. To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h. - - -VMS: - -On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1" -qualifier with MMS when building the JPEG package. - -VAX/VMS v5.5-1 may have problems with the test step of the build procedure -reporting differences when it compares the original and test images. If the -error points to the last block of the files, it is most likely bogus and may -be safely ignored. It seems to be because the files are Stream_LF and -Backup/Compare has difficulty with the (presumably) null padded files. -This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1. diff --git a/libjpegtwrp/jcapimin.c b/libjpegtwrp/jcapimin.c deleted file mode 100644 index 54fb8c58c..000000000 --- a/libjpegtwrp/jcapimin.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * jcapimin.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the compression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-compression case or the transcoding-only - * case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jcapistd.c. But also see jcparam.c for - * parameter-setup helper routines, jcomapi.c for routines shared by - * compression and decompression, and jctrans.c for the transcoding case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG compression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL(void) -jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) -{ - int i; - - /* Guard against version mismatches between library and caller. */ - cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ - if (version != JPEG_LIB_VERSION) - ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); - if (structsize != SIZEOF(struct jpeg_compress_struct)) - ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, - (int) SIZEOF(struct jpeg_compress_struct), (int) structsize); - - /* For debugging purposes, we zero the whole master structure. - * But the application has already set the err pointer, and may have set - * client_data, so we have to save and restore those fields. - * Note: if application hasn't set client_data, tools like Purify may - * complain here. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - void * client_data = cinfo->client_data; /* ignore Purify complaint here */ - MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); - cinfo->err = err; - cinfo->client_data = client_data; - } - cinfo->is_decompressor = FALSE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->dest = NULL; - - cinfo->comp_info = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) - cinfo->quant_tbl_ptrs[i] = NULL; - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - cinfo->script_space = NULL; - - cinfo->input_gamma = 1.0; /* in case application forgets */ - - /* OK, I'm ready */ - cinfo->global_state = CSTATE_START; -} - - -/* - * Destruction of a JPEG compression object - */ - -GLOBAL(void) -jpeg_destroy_compress (j_compress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG compression operation, - * but don't destroy the object itself. - */ - -GLOBAL(void) -jpeg_abort_compress (j_compress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Forcibly suppress or un-suppress all quantization and Huffman tables. - * Marks all currently defined tables as already written (if suppress) - * or not written (if !suppress). This will control whether they get emitted - * by a subsequent jpeg_start_compress call. - * - * This routine is exported for use by applications that want to produce - * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but - * since it is called by jpeg_start_compress, we put it here --- otherwise - * jcparam.o would be linked whether the application used it or not. - */ - -GLOBAL(void) -jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) -{ - int i; - JQUANT_TBL * qtbl; - JHUFF_TBL * htbl; - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) - qtbl->sent_table = suppress; - } - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) - htbl->sent_table = suppress; - if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) - htbl->sent_table = suppress; - } -} - - -/* - * Finish JPEG compression. - * - * If a multipass operating mode was selected, this may do a great deal of - * work including most of the actual output. - */ - -GLOBAL(void) -jpeg_finish_compress (j_compress_ptr cinfo) -{ - JDIMENSION iMCU_row; - - if (cinfo->global_state == CSTATE_SCANNING || - cinfo->global_state == CSTATE_RAW_OK) { - /* Terminate first pass */ - if (cinfo->next_scanline < cinfo->image_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_pass) (cinfo); - } else if (cinfo->global_state != CSTATE_WRCOEFS) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any remaining passes */ - while (! cinfo->master->is_last_pass) { - (*cinfo->master->prepare_for_pass) (cinfo); - for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) iMCU_row; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* We bypass the main controller and invoke coef controller directly; - * all work is being done from the coefficient buffer. - */ - if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } - (*cinfo->master->finish_pass) (cinfo); - } - /* Write EOI, do final cleanup */ - (*cinfo->marker->write_file_trailer) (cinfo); - (*cinfo->dest->term_destination) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); -} - - -/* - * Write a special marker. - * This is only recommended for writing COM or APPn markers. - * Must be called after jpeg_start_compress() and before - * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). - */ - -GLOBAL(void) -jpeg_write_marker (j_compress_ptr cinfo, int marker, - const JOCTET *dataptr, unsigned int datalen) -{ - JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val)); - - if (cinfo->next_scanline != 0 || - (cinfo->global_state != CSTATE_SCANNING && - cinfo->global_state != CSTATE_RAW_OK && - cinfo->global_state != CSTATE_WRCOEFS)) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); - write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */ - while (datalen--) { - (*write_marker_byte) (cinfo, *dataptr); - dataptr++; - } -} - -/* Same, but piecemeal. */ - -GLOBAL(void) -jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen) -{ - if (cinfo->next_scanline != 0 || - (cinfo->global_state != CSTATE_SCANNING && - cinfo->global_state != CSTATE_RAW_OK && - cinfo->global_state != CSTATE_WRCOEFS)) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); -} - -GLOBAL(void) -jpeg_write_m_byte (j_compress_ptr cinfo, int val) -{ - (*cinfo->marker->write_marker_byte) (cinfo, val); -} - - -/* - * Alternate compression function: just write an abbreviated table file. - * Before calling this, all parameters and a data destination must be set up. - * - * To produce a pair of files containing abbreviated tables and abbreviated - * image data, one would proceed as follows: - * - * initialize JPEG object - * set JPEG parameters - * set destination to table file - * jpeg_write_tables(cinfo); - * set destination to image file - * jpeg_start_compress(cinfo, FALSE); - * write data... - * jpeg_finish_compress(cinfo); - * - * jpeg_write_tables has the side effect of marking all tables written - * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress - * will not re-emit the tables unless it is passed write_all_tables=TRUE. - */ - -GLOBAL(void) -jpeg_write_tables (j_compress_ptr cinfo) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Initialize the marker writer ... bit of a crock to do it here. */ - jinit_marker_writer(cinfo); - /* Write them tables! */ - (*cinfo->marker->write_tables_only) (cinfo); - /* And clean up. */ - (*cinfo->dest->term_destination) (cinfo); - /* - * In library releases up through v6a, we called jpeg_abort() here to free - * any working memory allocated by the destination manager and marker - * writer. Some applications had a problem with that: they allocated space - * of their own from the library memory manager, and didn't want it to go - * away during write_tables. So now we do nothing. This will cause a - * memory leak if an app calls write_tables repeatedly without doing a full - * compression cycle or otherwise resetting the JPEG object. However, that - * seems less bad than unexpectedly freeing memory in the normal case. - * An app that prefers the old behavior can call jpeg_abort for itself after - * each call to jpeg_write_tables(). - */ -} diff --git a/libjpegtwrp/jcapistd.c b/libjpegtwrp/jcapistd.c deleted file mode 100644 index c0320b1b1..000000000 --- a/libjpegtwrp/jcapistd.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * jcapistd.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the compression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-compression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_compress, it will end up linking in the entire compressor. - * We thus must separate this file from jcapimin.c to avoid linking the - * whole compression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Compression initialization. - * Before calling this, all parameters and a data destination must be set up. - * - * We require a write_all_tables parameter as a failsafe check when writing - * multiple datastreams from the same compression object. Since prior runs - * will have left all the tables marked sent_table=TRUE, a subsequent run - * would emit an abbreviated stream (no tables) by default. This may be what - * is wanted, but for safety's sake it should not be the default behavior: - * programmers should have to make a deliberate choice to emit abbreviated - * images. Therefore the documentation and examples should encourage people - * to pass write_all_tables=TRUE; then it will take active thought to do the - * wrong thing. - */ - -GLOBAL(void) -jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (write_all_tables) - jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ - - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - jinit_compress_master(cinfo); - /* Set up for the first pass */ - (*cinfo->master->prepare_for_pass) (cinfo); - /* Ready for application to drive first pass through jpeg_write_scanlines - * or jpeg_write_raw_data. - */ - cinfo->next_scanline = 0; - cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); -} - - -/* - * Write some scanlines of data to the JPEG compressor. - * - * The return value will be the number of lines actually written. - * This should be less than the supplied num_lines only in case that - * the data destination module has requested suspension of the compressor, - * or if more than image_height scanlines are passed in. - * - * Note: we warn about excess calls to jpeg_write_scanlines() since - * this likely signals an application programmer error. However, - * excess scanlines passed in the last valid call are *silently* ignored, - * so that the application need not adjust num_lines for end-of-image - * when using a multiple-scanline buffer. - */ - -GLOBAL(JDIMENSION) -jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION num_lines) -{ - JDIMENSION row_ctr, rows_left; - - if (cinfo->global_state != CSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_scanlines. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_scanlines. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Ignore any extra scanlines at bottom of image. */ - rows_left = cinfo->image_height - cinfo->next_scanline; - if (num_lines > rows_left) - num_lines = rows_left; - - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); - cinfo->next_scanline += row_ctr; - return row_ctr; -} - - -/* - * Alternate entry point to write raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL(JDIMENSION) -jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION num_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != CSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->next_scanline >= cinfo->image_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->next_scanline; - cinfo->progress->pass_limit = (long) cinfo->image_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Give master control module another chance if this is first call to - * jpeg_write_raw_data. This lets output of the frame/scan headers be - * delayed so that application can write COM, etc, markers between - * jpeg_start_compress and jpeg_write_raw_data. - */ - if (cinfo->master->call_pass_startup) - (*cinfo->master->pass_startup) (cinfo); - - /* Verify that at least one iMCU row has been passed. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; - if (num_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Directly compress the row. */ - if (! (*cinfo->coef->compress_data) (cinfo, data)) { - /* If compressor did not consume the whole row, suspend processing. */ - return 0; - } - - /* OK, we processed one iMCU row. */ - cinfo->next_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} diff --git a/libjpegtwrp/jccoefct.c b/libjpegtwrp/jccoefct.c deleted file mode 100644 index 1963ddb61..000000000 --- a/libjpegtwrp/jccoefct.c +++ /dev/null @@ -1,449 +0,0 @@ -/* - * jccoefct.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for compression. - * This controller is the top level of the JPEG compressor proper. - * The coefficient buffer lies between forward-DCT and entropy encoding steps. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* We use a full-image coefficient buffer when doing Huffman optimization, - * and also for writing multiple-scan JPEG files. In all cases, the DCT - * step is run during the first pass, and subsequent passes need only read - * the buffered coefficients. - */ -#ifdef ENTROPY_OPT_SUPPORTED -#define FULL_COEF_BUFFER_SUPPORTED -#else -#ifdef C_MULTISCAN_FILES_SUPPORTED -#define FULL_COEF_BUFFER_SUPPORTED -#endif -#endif - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_coef_controller pub; /* public fields */ - - JDIMENSION iMCU_row_num; /* iMCU row # within image */ - JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* For single-pass compression, it's sufficient to buffer just one MCU - * (although this may prove a bit slow in practice). We allocate a - * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each - * MCU constructed and sent. (On 80x86, the workspace is FAR even though - * it's not really very big; this is to keep the module interfaces unchanged - * when a large coefficient buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays. - */ - JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; - - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - - -/* Forward declarations */ -METHODDEF(boolean) compress_data - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -#ifdef FULL_COEF_BUFFER_SUPPORTED -METHODDEF(boolean) compress_first_pass - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -METHODDEF(boolean) compress_output - JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); -#endif - - -LOCAL(void) -start_iMCU_row (j_compress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->mcu_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - coef->iMCU_row_num = 0; - start_iMCU_row(cinfo); - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (coef->whole_image[0] != NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_data; - break; -#ifdef FULL_COEF_BUFFER_SUPPORTED - case JBUF_SAVE_AND_PASS: - if (coef->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_first_pass; - break; - case JBUF_CRANK_DEST: - if (coef->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - coef->pub.compress_data = compress_output; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data in the single-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the image. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf contains a plane for each component in image, - * which we index according to the component's SOF position. - */ - -METHODDEF(boolean) -compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, bi, ci, yindex, yoffset, blockcnt; - JDIMENSION ypos, xpos; - jpeg_component_info *compptr; - - /* Loop to write as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Determine where data comes from in input_buf and do the DCT thing. - * Each call on forward_DCT processes a horizontal row of DCT blocks - * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks - * sequentially. Dummy blocks at the right or bottom edge are filled in - * specially. The data in them does not matter for image reconstruction, - * so we fill them with values that will encode to the smallest amount of - * data, viz: all zeroes in the AC entries, DC entries equal to previous - * block's DC value. (Thanks to Thomas Kinsman for this idea.) - */ - blkn = 0; - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - xpos = MCU_col_num * compptr->MCU_sample_width; - ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */ - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (coef->iMCU_row_num < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - (*cinfo->fdct->forward_DCT) (cinfo, compptr, - input_buf[compptr->component_index], - coef->MCU_buffer[blkn], - ypos, xpos, (JDIMENSION) blockcnt); - if (blockcnt < compptr->MCU_width) { - /* Create some dummy blocks at the right edge of the image. */ - jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], - (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); - for (bi = blockcnt; bi < compptr->MCU_width; bi++) { - coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; - } - } - } else { - /* Create a row of dummy blocks at the bottom of the image. */ - jzero_far((void FAR *) coef->MCU_buffer[blkn], - compptr->MCU_width * SIZEOF(JBLOCK)); - for (bi = 0; bi < compptr->MCU_width; bi++) { - coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; - } - } - blkn += compptr->MCU_width; - ypos += DCTSIZE; - } - } - /* Try to write the MCU. In event of a suspension failure, we will - * re-DCT the MCU on restart (a bit inefficient, could be fixed...) - */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - - -#ifdef FULL_COEF_BUFFER_SUPPORTED - -/* - * Process some data in the first pass of a multi-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the image. - * This amount of data is read from the source buffer, DCT'd and quantized, - * and saved into the virtual arrays. We also generate suitable dummy blocks - * as needed at the right and lower edges. (The dummy blocks are constructed - * in the virtual arrays, which have been padded appropriately.) This makes - * it possible for subsequent passes not to worry about real vs. dummy blocks. - * - * We must also emit the data to the entropy encoder. This is conveniently - * done by calling compress_output() after we've loaded the current strip - * of the virtual arrays. - * - * NB: input_buf contains a plane for each component in image. All - * components are DCT'd and loaded into the virtual arrays in this pass. - * However, it may be that only a subset of the components are emitted to - * the entropy encoder during this first pass; be careful about looking - * at the scan-dependent variables (MCU dimensions, etc). - */ - -METHODDEF(boolean) -compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION blocks_across, MCUs_across, MCUindex; - int bi, ci, h_samp_factor, block_row, block_rows, ndummy; - JCOEF lastDC; - jpeg_component_info *compptr; - JBLOCKARRAY buffer; - JBLOCKROW thisblockrow, lastblockrow; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (coef->iMCU_row_num < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here, since may not be set! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - blocks_across = compptr->width_in_blocks; - h_samp_factor = compptr->h_samp_factor; - /* Count number of dummy blocks to be added at the right margin. */ - ndummy = (int) (blocks_across % h_samp_factor); - if (ndummy > 0) - ndummy = h_samp_factor - ndummy; - /* Perform DCT for all non-dummy blocks in this iMCU row. Each call - * on forward_DCT processes a complete horizontal row of DCT blocks. - */ - for (block_row = 0; block_row < block_rows; block_row++) { - thisblockrow = buffer[block_row]; - (*cinfo->fdct->forward_DCT) (cinfo, compptr, - input_buf[ci], thisblockrow, - (JDIMENSION) (block_row * DCTSIZE), - (JDIMENSION) 0, blocks_across); - if (ndummy > 0) { - /* Create dummy blocks at the right edge of the image. */ - thisblockrow += blocks_across; /* => first dummy block */ - jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); - lastDC = thisblockrow[-1][0]; - for (bi = 0; bi < ndummy; bi++) { - thisblockrow[bi][0] = lastDC; - } - } - } - /* If at end of image, create dummy block rows as needed. - * The tricky part here is that within each MCU, we want the DC values - * of the dummy blocks to match the last real block's DC value. - * This squeezes a few more bytes out of the resulting file... - */ - if (coef->iMCU_row_num == last_iMCU_row) { - blocks_across += ndummy; /* include lower right corner */ - MCUs_across = blocks_across / h_samp_factor; - for (block_row = block_rows; block_row < compptr->v_samp_factor; - block_row++) { - thisblockrow = buffer[block_row]; - lastblockrow = buffer[block_row-1]; - jzero_far((void FAR *) thisblockrow, - (size_t) (blocks_across * SIZEOF(JBLOCK))); - for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { - lastDC = lastblockrow[h_samp_factor-1][0]; - for (bi = 0; bi < h_samp_factor; bi++) { - thisblockrow[bi][0] = lastDC; - } - thisblockrow += h_samp_factor; /* advance to next MCU in row */ - lastblockrow += h_samp_factor; - } - } - } - } - /* NB: compress_output will increment iMCU_row_num if successful. - * A suspension return will result in redoing all the work above next time. - */ - - /* Emit data to the entropy encoder, sharing code with subsequent passes */ - return compress_output(cinfo, input_buf); -} - - -/* - * Process some data in subsequent passes of a multi-pass case. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the scan. - * The data is obtained from the virtual arrays and fed to the entropy coder. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf is ignored; it is likely to be a NULL pointer. - */ - -METHODDEF(boolean) -compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. - * NB: during first pass, this is safe only because the buffers will - * already be aligned properly, so jmemmgr.c won't need to do any I/O. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - } - } - } - /* Try to write the MCU. */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); - return TRUE; -} - -#endif /* FULL_COEF_BUFFER_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL(void) -jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; - coef->pub.start_pass = start_pass_coef; - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef FULL_COEF_BUFFER_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - int ci; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) compptr->v_samp_factor); - } -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->whole_image[0] = NULL; /* flag for no virtual arrays */ - } -} diff --git a/libjpegtwrp/jccolor.c b/libjpegtwrp/jccolor.c deleted file mode 100644 index 57a76c36b..000000000 --- a/libjpegtwrp/jccolor.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * jccolor.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -// this enables unrolling null_convert's loop, and reading/write ints for speed -#define ENABLE_ANDROID_NULL_CONVERT - -/* Private subobject */ - -typedef struct { - struct jpeg_color_converter pub; /* public fields */ - - /* Private state for RGB->YCC conversion */ - INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ -} my_color_converter; - -typedef my_color_converter * my_cconvert_ptr; - - -/**************** RGB -> YCbCr conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B - * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE - * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, - * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and - * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) - * were not represented exactly. Now we sacrifice exact representation of - * maximum red and maximum blue in order to get exact grayscales. - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times R,G,B for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included - * in the tables to save adding them separately in the inner loop. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS) -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L< Y section */ -#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ -#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ -#define R_CB_OFF (3*(MAXJSAMPLE+1)) -#define G_CB_OFF (4*(MAXJSAMPLE+1)) -#define B_CB_OFF (5*(MAXJSAMPLE+1)) -#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ -#define G_CR_OFF (6*(MAXJSAMPLE+1)) -#define B_CR_OFF (7*(MAXJSAMPLE+1)) -#define TABLE_SIZE (8*(MAXJSAMPLE+1)) - - -/* - * Initialize for RGB->YCC colorspace conversion. - */ - -METHODDEF(void) -rgb_ycc_start (j_compress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - INT32 * rgb_ycc_tab; - INT32 i; - - /* Allocate and fill in the conversion tables. */ - cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (TABLE_SIZE * SIZEOF(INT32))); - - for (i = 0; i <= MAXJSAMPLE; i++) { - rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; - rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; - rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; - rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; - rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; - /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. - * This ensures that the maximum output will round to MAXJSAMPLE - * not MAXJSAMPLE+1, and thus that we don't have to range-limit. - */ - rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; -/* B=>Cb and R=>Cr tables are the same - rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; -*/ - rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; - rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * - * Note that we change from the application's interleaved-pixel format - * to our internal noninterleaved, one-plane-per-component format. - * The input buffer is therefore three times as wide as the output buffer. - * - * A starting row offset is provided only for the output buffer. The caller - * can easily adjust the passed input_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF(void) -rgb_ycc_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr[RGB_RED]); - g = GETJSAMPLE(inptr[RGB_GREEN]); - b = GETJSAMPLE(inptr[RGB_BLUE]); - inptr += RGB_PIXELSIZE; - /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations - * must be too; we do not need an explicit range-limiting operation. - * Hence the value being shifted is never negative, and we don't - * need the general RIGHT_SHIFT macro. - */ - /* Y */ - outptr0[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - /* Cb */ - outptr1[col] = (JSAMPLE) - ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) - >> SCALEBITS); - /* Cr */ - outptr2[col] = (JSAMPLE) - ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) - >> SCALEBITS); - } - } -} - - -/**************** Cases other than RGB -> YCbCr **************/ - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles RGB->grayscale conversion, which is the same - * as the RGB->Y portion of RGB->YCbCr. - * We assume rgb_ycc_start has been called (we only use the Y tables). - */ - -METHODDEF(void) -rgb_gray_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = GETJSAMPLE(inptr[RGB_RED]); - g = GETJSAMPLE(inptr[RGB_GREEN]); - b = GETJSAMPLE(inptr[RGB_BLUE]); - inptr += RGB_PIXELSIZE; - /* Y */ - outptr[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles Adobe-style CMYK->YCCK conversion, - * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same - * conversion as above, while passing K (black) unchanged. - * We assume rgb_ycc_start has been called. - */ - -METHODDEF(void) -cmyk_ycck_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int r, g, b; - register INT32 * ctab = cconvert->rgb_ycc_tab; - register JSAMPROW inptr; - register JSAMPROW outptr0, outptr1, outptr2, outptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr0 = output_buf[0][output_row]; - outptr1 = output_buf[1][output_row]; - outptr2 = output_buf[2][output_row]; - outptr3 = output_buf[3][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); - g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); - b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); - /* K passes through as-is */ - outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ - inptr += 4; - /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations - * must be too; we do not need an explicit range-limiting operation. - * Hence the value being shifted is never negative, and we don't - * need the general RIGHT_SHIFT macro. - */ - /* Y */ - outptr0[col] = (JSAMPLE) - ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) - >> SCALEBITS); - /* Cb */ - outptr1[col] = (JSAMPLE) - ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) - >> SCALEBITS); - /* Cr */ - outptr2[col] = (JSAMPLE) - ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) - >> SCALEBITS); - } - } -} - - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles grayscale output with no conversion. - * The source can be either plain grayscale or YCbCr (since Y == gray). - */ - -METHODDEF(void) -grayscale_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->image_width; - int instride = cinfo->input_components; - - while (--num_rows >= 0) { - inptr = *input_buf++; - outptr = output_buf[0][output_row]; - output_row++; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ - inptr += instride; - } - } -} - -#ifdef ENABLE_ANDROID_NULL_CONVERT - -typedef unsigned long UINT32; - -#define B0(n) ((n) & 0xFF) -#define B1(n) (((n) >> 8) & 0xFF) -#define B2(n) (((n) >> 16) & 0xFF) -#define B3(n) ((n) >> 24) - -#define PACK(a, b, c, d) ((a) | ((b) << 8) | ((c) << 16) | ((d) << 24)) - -static int ptr_is_quad(const void* p) -{ - return (((const char*)p - (const char*)0) & 3) == 0; -} - -static void copyquads(const UINT32 in[], UINT32 out0[], UINT32 out1[], UINT32 out2[], int col4) -{ - do { - UINT32 src0 = *in++; - UINT32 src1 = *in++; - UINT32 src2 = *in++; - // LEndian - *out0++ = PACK(B0(src0), B3(src0), B2(src1), B1(src2)); - *out1++ = PACK(B1(src0), B0(src1), B3(src1), B2(src2)); - *out2++ = PACK(B2(src0), B1(src1), B0(src2), B3(src2)); - } while (--col4 != 0); -} - -#endif - -/* - * Convert some rows of samples to the JPEG colorspace. - * This version handles multi-component colorspaces without conversion. - * We assume input_components == num_components. - */ - -METHODDEF(void) -null_convert (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows) -{ - register JSAMPROW inptr; - register JSAMPROW outptr; - register JDIMENSION col; - register int ci; - int nc = cinfo->num_components; - JDIMENSION num_cols = cinfo->image_width; - -#ifdef ENABLE_ANDROID_NULL_CONVERT - if (1 == num_rows && 3 == nc && num_cols > 0) { - JSAMPROW inptr = *input_buf; - JSAMPROW outptr0 = output_buf[0][output_row]; - JSAMPROW outptr1 = output_buf[1][output_row]; - JSAMPROW outptr2 = output_buf[2][output_row]; - - int col = num_cols; - int col4 = col >> 2; - if (col4 > 0 && ptr_is_quad(inptr) && ptr_is_quad(outptr0) && - ptr_is_quad(outptr1) && ptr_is_quad(outptr2)) { - - const UINT32* in = (const UINT32*)inptr; - UINT32* out0 = (UINT32*)outptr0; - UINT32* out1 = (UINT32*)outptr1; - UINT32* out2 = (UINT32*)outptr2; - copyquads(in, out0, out1, out2, col4); - col &= 3; - if (0 == col) - return; - col4 <<= 2; - inptr += col4 * 3; /* we read this 3 times per in copyquads */ - outptr0 += col4; - outptr1 += col4; - outptr2 += col4; - /* fall through to while-loop */ - } - do { - *outptr0++ = *inptr++; - *outptr1++ = *inptr++; - *outptr2++ = *inptr++; - } while (--col != 0); - return; - } -SLOW: -#endif - while (--num_rows >= 0) { - /* It seems fastest to make a separate pass for each component. */ - for (ci = 0; ci < nc; ci++) { - inptr = *input_buf; - outptr = output_buf[ci][output_row]; - for (col = 0; col < num_cols; col++) { - outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */ - inptr += nc; - } - } - input_buf++; - output_row++; - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF(void) -null_method (j_compress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for input colorspace conversion. - */ - -GLOBAL(void) -jinit_color_converter (j_compress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_converter)); - cinfo->cconvert = (struct jpeg_color_converter *) cconvert; - /* set start_pass to null method until we find out differently */ - cconvert->pub.start_pass = null_method; - - /* Make sure input_components agrees with in_color_space */ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - if (cinfo->input_components != 1) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_RGB: -#if RGB_PIXELSIZE != 3 - if (cinfo->input_components != RGB_PIXELSIZE) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; -#endif /* else share code with YCbCr */ - - case JCS_YCbCr: - if (cinfo->input_components != 3) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->input_components != 4) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->input_components < 1) - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - break; - } - - /* Check num_components, set conversion method based on requested space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_GRAYSCALE) - cconvert->pub.color_convert = grayscale_convert; - else if (cinfo->in_color_space == JCS_RGB) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = rgb_gray_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = grayscale_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_RGB) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = rgb_ycc_convert; - } else if (cinfo->in_color_space == JCS_YCbCr) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_CMYK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - if (cinfo->in_color_space == JCS_CMYK) { - cconvert->pub.start_pass = rgb_ycc_start; - cconvert->pub.color_convert = cmyk_ycck_convert; - } else if (cinfo->in_color_space == JCS_YCCK) - cconvert->pub.color_convert = null_convert; - else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: /* allow null conversion of JCS_UNKNOWN */ - if (cinfo->jpeg_color_space != cinfo->in_color_space || - cinfo->num_components != cinfo->input_components) - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - cconvert->pub.color_convert = null_convert; - break; - } -} diff --git a/libjpegtwrp/jcdctmgr.c b/libjpegtwrp/jcdctmgr.c deleted file mode 100644 index 61fa79b9e..000000000 --- a/libjpegtwrp/jcdctmgr.c +++ /dev/null @@ -1,387 +0,0 @@ -/* - * jcdctmgr.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the forward-DCT management logic. - * This code selects a particular DCT implementation to be used, - * and it performs related housekeeping chores including coefficient - * quantization. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_forward_dct pub; /* public fields */ - - /* Pointer to the DCT routine actually in use */ - forward_DCT_method_ptr do_dct; - - /* The actual post-DCT divisors --- not identical to the quant table - * entries, because of scaling (especially for an unnormalized DCT). - * Each table is given in normal array order. - */ - DCTELEM * divisors[NUM_QUANT_TBLS]; - -#ifdef DCT_FLOAT_SUPPORTED - /* Same as above for the floating-point case. */ - float_DCT_method_ptr do_float_dct; - FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; -#endif -} my_fdct_controller; - -typedef my_fdct_controller * my_fdct_ptr; - - -/* - * Initialize for a processing pass. - * Verify that all referenced Q-tables are present, and set up - * the divisor table for each one. - * In the current implementation, DCT of all components is done during - * the first pass, even if only some components will be output in the - * first scan. Hence all components should be examined here. - */ - -METHODDEF(void) -start_pass_fdctmgr (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - int ci, qtblno, i; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - DCTELEM * dtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - qtblno = compptr->quant_tbl_no; - /* Make sure specified quantization table is present */ - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - qtbl = cinfo->quant_tbl_ptrs[qtblno]; - /* Compute divisors for this quant table */ - /* We may do this more than once for same table, but it's not a big deal */ - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - /* For LL&M IDCT method, divisors are equal to raw quantization - * coefficients multiplied by 8 (to counteract scaling). - */ - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; - } - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - */ -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - if (fdct->divisors[qtblno] == NULL) { - fdct->divisors[qtblno] = (DCTELEM *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(DCTELEM)); - } - dtbl = fdct->divisors[qtblno]; - for (i = 0; i < DCTSIZE2; i++) { - dtbl[i] = (DCTELEM) - DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], - (INT32) aanscales[i]), - CONST_BITS-3); - } - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, divisors are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * We apply a further scale factor of 8. - * What's actually stored is 1/divisor so that the inner loop can - * use a multiplication rather than a division. - */ - FAST_FLOAT * fdtbl; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - if (fdct->float_divisors[qtblno] == NULL) { - fdct->float_divisors[qtblno] = (FAST_FLOAT *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - DCTSIZE2 * SIZEOF(FAST_FLOAT)); - } - fdtbl = fdct->float_divisors[qtblno]; - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fdtbl[i] = (FAST_FLOAT) - (1.0 / (((double) qtbl->quantval[i] * - aanscalefactor[row] * aanscalefactor[col] * 8.0))); - i++; - } - } - } - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Perform forward DCT on one or more blocks of a component. - * - * The input samples are taken from the sample_data[] array starting at - * position start_row/start_col, and moving to the right for any additional - * blocks. The quantized coefficients are returned in coef_blocks[]. - */ - -METHODDEF(void) -forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks) -/* This version is used for integer DCT implementations. */ -{ - /* This routine is heavily used, so it's worth coding it tightly. */ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - forward_DCT_method_ptr do_dct = fdct->do_dct; - DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; - DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ - JDIMENSION bi; - - sample_data += start_row; /* fold in the vertical offset once */ - - for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { - /* Load data into workspace, applying unsigned->signed conversion */ - { register DCTELEM *workspaceptr; - register JSAMPROW elemptr; - register int elemr; - - workspaceptr = workspace; - for (elemr = 0; elemr < DCTSIZE; elemr++) { - elemptr = sample_data[elemr] + start_col; -#if DCTSIZE == 8 /* unroll the inner loop */ - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; -#else - { register int elemc; - for (elemc = DCTSIZE; elemc > 0; elemc--) { - *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; - } - } -#endif - } - } - - /* Perform the DCT */ - (*do_dct) (workspace); - - /* Quantize/descale the coefficients, and store into coef_blocks[] */ - { register DCTELEM temp, qval; - register int i; - register JCOEFPTR output_ptr = coef_blocks[bi]; - - for (i = 0; i < DCTSIZE2; i++) { - qval = divisors[i]; - temp = workspace[i]; - /* Divide the coefficient value by qval, ensuring proper rounding. - * Since C does not specify the direction of rounding for negative - * quotients, we have to force the dividend positive for portability. - * - * In most files, at least half of the output values will be zero - * (at default quantization settings, more like three-quarters...) - * so we should ensure that this case is fast. On many machines, - * a comparison is enough cheaper than a divide to make a special test - * a win. Since both inputs will be nonnegative, we need only test - * for a < b to discover whether a/b is 0. - * If your machine's division is fast enough, define FAST_DIVIDE. - */ -#ifdef FAST_DIVIDE -#define DIVIDE_BY(a,b) a /= b -#else -#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 -#endif - if (temp < 0) { - temp = -temp; - temp += qval>>1; /* for rounding */ - DIVIDE_BY(temp, qval); - temp = -temp; - } else { - temp += qval>>1; /* for rounding */ - DIVIDE_BY(temp, qval); - } - output_ptr[i] = (JCOEF) temp; - } - } - } -} - - -#ifdef DCT_FLOAT_SUPPORTED - -METHODDEF(void) -forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks) -/* This version is used for floating-point DCT implementations. */ -{ - /* This routine is heavily used, so it's worth coding it tightly. */ - my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; - float_DCT_method_ptr do_dct = fdct->do_float_dct; - FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; - FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ - JDIMENSION bi; - - sample_data += start_row; /* fold in the vertical offset once */ - - for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { - /* Load data into workspace, applying unsigned->signed conversion */ - { register FAST_FLOAT *workspaceptr; - register JSAMPROW elemptr; - register int elemr; - - workspaceptr = workspace; - for (elemr = 0; elemr < DCTSIZE; elemr++) { - elemptr = sample_data[elemr] + start_col; -#if DCTSIZE == 8 /* unroll the inner loop */ - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); -#else - { register int elemc; - for (elemc = DCTSIZE; elemc > 0; elemc--) { - *workspaceptr++ = (FAST_FLOAT) - (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); - } - } -#endif - } - } - - /* Perform the DCT */ - (*do_dct) (workspace); - - /* Quantize/descale the coefficients, and store into coef_blocks[] */ - { register FAST_FLOAT temp; - register int i; - register JCOEFPTR output_ptr = coef_blocks[bi]; - - for (i = 0; i < DCTSIZE2; i++) { - /* Apply the quantization and scaling factor */ - temp = workspace[i] * divisors[i]; - /* Round to nearest integer. - * Since C does not specify the direction of rounding for negative - * quotients, we have to force the dividend positive for portability. - * The maximum coefficient size is +-16K (for 12-bit data), so this - * code should work for either 16-bit or 32-bit ints. - */ - output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); - } - } - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ - - -/* - * Initialize FDCT manager. - */ - -GLOBAL(void) -jinit_forward_dct (j_compress_ptr cinfo) -{ - my_fdct_ptr fdct; - int i; - - fdct = (my_fdct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_fdct_controller)); - cinfo->fdct = (struct jpeg_forward_dct *) fdct; - fdct->pub.start_pass = start_pass_fdctmgr; - - switch (cinfo->dct_method) { -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - fdct->pub.forward_DCT = forward_DCT; - fdct->do_dct = jpeg_fdct_islow; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - fdct->pub.forward_DCT = forward_DCT; - fdct->do_dct = jpeg_fdct_ifast; - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - fdct->pub.forward_DCT = forward_DCT_float; - fdct->do_float_dct = jpeg_fdct_float; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - - /* Mark divisor tables unallocated */ - for (i = 0; i < NUM_QUANT_TBLS; i++) { - fdct->divisors[i] = NULL; -#ifdef DCT_FLOAT_SUPPORTED - fdct->float_divisors[i] = NULL; -#endif - } -} diff --git a/libjpegtwrp/jchuff.c b/libjpegtwrp/jchuff.c deleted file mode 100644 index f23525054..000000000 --- a/libjpegtwrp/jchuff.c +++ /dev/null @@ -1,909 +0,0 @@ -/* - * jchuff.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines. - * - * Much of the complexity here has to do with supporting output suspension. - * If the data destination module demands suspension, we want to be able to - * back up to the start of the current MCU. To do this, we copy state - * variables into local working storage, and update them back to the - * permanent JPEG objects only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jchuff.h" /* Declarations shared with jcphuff.c */ - - -/* Expanded entropy encoder object for Huffman encoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).put_buffer = (src).put_buffer, \ - (dest).put_bits = (src).put_bits, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - savable_state saved; /* Bit buffer & DC state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - -#ifdef ENTROPY_OPT_SUPPORTED /* Statistics tables for optimization */ - long * dc_count_ptrs[NUM_HUFF_TBLS]; - long * ac_count_ptrs[NUM_HUFF_TBLS]; -#endif -} huff_entropy_encoder; - -typedef huff_entropy_encoder * huff_entropy_ptr; - -/* Working state while writing an MCU. - * This struct contains all the fields that are needed by subroutines. - */ - -typedef struct { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - savable_state cur; /* Current bit buffer & DC state */ - j_compress_ptr cinfo; /* dump_buffer needs access to this */ -} working_state; - - -/* Forward declarations */ -METHODDEF(boolean) encode_mcu_huff JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(void) finish_pass_huff JPP((j_compress_ptr cinfo)); -#ifdef ENTROPY_OPT_SUPPORTED -METHODDEF(boolean) encode_mcu_gather JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(void) finish_pass_gather JPP((j_compress_ptr cinfo)); -#endif - - -/* - * Initialize for a Huffman-compressed scan. - * If gather_statistics is TRUE, we do not output anything during the scan, - * just count the Huffman symbols used and generate Huffman code tables. - */ - -METHODDEF(void) -start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - - if (gather_statistics) { -#ifdef ENTROPY_OPT_SUPPORTED - entropy->pub.encode_mcu = encode_mcu_gather; - entropy->pub.finish_pass = finish_pass_gather; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - entropy->pub.encode_mcu = encode_mcu_huff; - entropy->pub.finish_pass = finish_pass_huff; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - if (gather_statistics) { -#ifdef ENTROPY_OPT_SUPPORTED - /* Check for invalid table indexes */ - /* (make_c_derived_tbl does this in the other path) */ - if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); - if (actbl < 0 || actbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->dc_count_ptrs[dctbl] == NULL) - entropy->dc_count_ptrs[dctbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long)); - if (entropy->ac_count_ptrs[actbl] == NULL) - entropy->ac_count_ptrs[actbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long)); -#endif - } else { - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl, - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_c_derived_tbl(cinfo, FALSE, actbl, - & entropy->ac_derived_tbls[actbl]); - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bit buffer to empty */ - entropy->saved.put_buffer = 0; - entropy->saved.put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* - * Compute the derived values for a Huffman table. - * This routine also performs some validation checks on the table. - * - * Note this is also used by jcphuff.c. - */ - -GLOBAL(void) -jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, - c_derived_tbl ** pdtbl) -{ - JHUFF_TBL *htbl; - c_derived_tbl *dtbl; - int p, i, l, lastp, si, maxsymbol; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Note that huffsize[] and huffcode[] are filled in code-length order, - * paralleling the order of the symbols themselves in htbl->huffval[]. - */ - - /* Find the input Huffman table */ - if (tblno < 0 || tblno >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - htbl = - isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (c_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(c_derived_tbl)); - dtbl = *pdtbl; - - /* Figure C.1: make table of Huffman code length for each symbol */ - - p = 0; - for (l = 1; l <= 16; l++) { - i = (int) htbl->bits[l]; - if (i < 0 || p + i > 256) /* protect against table overrun */ - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - while (i--) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - lastp = p; - - /* Figure C.2: generate the codes themselves */ - /* We also validate that the counts represent a legal Huffman code tree. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - /* code is now 1 more than the last code used for codelength si; but - * it must still fit in si bits, since no code is allowed to be all ones. - */ - if (((INT32) code) >= (((INT32) 1) << si)) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - code <<= 1; - si++; - } - - /* Figure C.3: generate encoding tables */ - /* These are code and size indexed by symbol value */ - - /* Set all codeless symbols to have code length 0; - * this lets us detect duplicate VAL entries here, and later - * allows emit_bits to detect any attempt to emit such symbols. - */ - MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); - - /* This is also a convenient place to check for out-of-range - * and duplicated VAL entries. We allow 0..255 for AC symbols - * but only 0..15 for DC. (We could constrain them further - * based on data depth and mode, but this seems enough.) - */ - maxsymbol = isDC ? 15 : 255; - - for (p = 0; p < lastp; p++) { - i = htbl->huffval[p]; - if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - dtbl->ehufco[i] = huffcode[p]; - dtbl->ehufsi[i] = huffsize[p]; - } -} - - -/* Outputting bytes to the file */ - -/* Emit a byte, taking 'action' if must suspend. */ -#define emit_byte(state,val,action) \ - { *(state)->next_output_byte++ = (JOCTET) (val); \ - if (--(state)->free_in_buffer == 0) \ - if (! dump_buffer(state)) \ - { action; } } - - -LOCAL(boolean) -dump_buffer (working_state * state) -/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ -{ - struct jpeg_destination_mgr * dest = state->cinfo->dest; - - if (! (*dest->empty_output_buffer) (state->cinfo)) - return FALSE; - /* After a successful buffer dump, must reset buffer pointers */ - state->next_output_byte = dest->next_output_byte; - state->free_in_buffer = dest->free_in_buffer; - return TRUE; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL(boolean) -emit_bits (working_state * state, unsigned int code, int size) -/* Emit some bits; return TRUE if successful, FALSE if must suspend */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register INT32 put_buffer = (INT32) code; - register int put_bits = state->cur.put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); - - put_buffer &= (((INT32) 1)<cur.put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte(state, c, return FALSE); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte(state, 0, return FALSE); - } - put_buffer <<= 8; - put_bits -= 8; - } - - state->cur.put_buffer = put_buffer; /* update state variables */ - state->cur.put_bits = put_bits; - - return TRUE; -} - - -LOCAL(boolean) -flush_bits (working_state * state) -{ - if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */ - return FALSE; - state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ - state->cur.put_bits = 0; - return TRUE; -} - - -/* Encode a single block's worth of coefficients */ - -LOCAL(boolean) -encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, - c_derived_tbl *dctbl, c_derived_tbl *actbl) -{ - register int temp, temp2; - register int nbits; - register int k, r, i; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = temp2 = block[0] - last_dc_val; - - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); - - /* Emit the Huffman-coded symbol for the number of bits */ - if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - if (! emit_bits(state, (unsigned int) temp2, nbits)) - return FALSE; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k < DCTSIZE2; k++) { - if ((temp = block[jpeg_natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) - return FALSE; - r -= 16; - } - - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); - - /* Emit Huffman symbol for run length / number of bits */ - i = (r << 4) + nbits; - if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i])) - return FALSE; - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (! emit_bits(state, (unsigned int) temp2, nbits)) - return FALSE; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0])) - return FALSE; - - return TRUE; -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL(boolean) -emit_restart (working_state * state, int restart_num) -{ - int ci; - - if (! flush_bits(state)) - return FALSE; - - emit_byte(state, 0xFF, return FALSE); - emit_byte(state, JPEG_RST0 + restart_num, return FALSE); - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) - state->cur.last_dc_val[ci] = 0; - - /* The restart counter is not updated until we successfully write the MCU. */ - - return TRUE; -} - - -/* - * Encode and output one MCU's worth of Huffman-compressed coefficients. - */ - -METHODDEF(boolean) -encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - int blkn, ci; - jpeg_component_info * compptr; - - /* Load up working state */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! emit_restart(&state, entropy->next_restart_num)) - return FALSE; - } - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - if (! encode_one_block(&state, - MCU_data[blkn][0], state.cur.last_dc_val[ci], - entropy->dc_derived_tbls[compptr->dc_tbl_no], - entropy->ac_derived_tbls[compptr->ac_tbl_no])) - return FALSE; - /* Update last_dc_val */ - state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - /* Completed MCU, so update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed scan. - */ - -METHODDEF(void) -finish_pass_huff (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - working_state state; - - /* Load up working state ... flush_bits needs it */ - state.next_output_byte = cinfo->dest->next_output_byte; - state.free_in_buffer = cinfo->dest->free_in_buffer; - ASSIGN_STATE(state.cur, entropy->saved); - state.cinfo = cinfo; - - /* Flush out the last data */ - if (! flush_bits(&state)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - - /* Update state */ - cinfo->dest->next_output_byte = state.next_output_byte; - cinfo->dest->free_in_buffer = state.free_in_buffer; - ASSIGN_STATE(entropy->saved, state.cur); -} - - -/* - * Huffman coding optimization. - * - * We first scan the supplied data and count the number of uses of each symbol - * that is to be Huffman-coded. (This process MUST agree with the code above.) - * Then we build a Huffman coding tree for the observed counts. - * Symbols which are not needed at all for the particular image are not - * assigned any code, which saves space in the DHT marker as well as in - * the compressed data. - */ - -#ifdef ENTROPY_OPT_SUPPORTED - - -/* Process a single block's worth of coefficients */ - -LOCAL(void) -htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, - long dc_counts[], long ac_counts[]) -{ - register int temp; - register int nbits; - register int k, r; - - /* Encode the DC coefficient difference per section F.1.2.1 */ - - temp = block[0] - last_dc_val; - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count the Huffman symbol for the number of bits */ - dc_counts[nbits]++; - - /* Encode the AC coefficients per section F.1.2.2 */ - - r = 0; /* r = run length of zeros */ - - for (k = 1; k < DCTSIZE2; k++) { - if ((temp = block[jpeg_natural_order[k]]) == 0) { - r++; - } else { - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - ac_counts[0xF0]++; - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - if (temp < 0) - temp = -temp; - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count Huffman symbol for run length / number of bits */ - ac_counts[(r << 4) + nbits]++; - - r = 0; - } - } - - /* If the last coef(s) were zero, emit an end-of-block code */ - if (r > 0) - ac_counts[0]++; -} - - -/* - * Trial-encode one MCU's worth of Huffman-compressed coefficients. - * No data is actually output, so no suspension return is possible. - */ - -METHODDEF(boolean) -encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn, ci; - jpeg_component_info * compptr; - - /* Take care of restart intervals if needed */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Update restart state */ - entropy->restarts_to_go = cinfo->restart_interval; - } - entropy->restarts_to_go--; - } - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], - entropy->dc_count_ptrs[compptr->dc_tbl_no], - entropy->ac_count_ptrs[compptr->ac_tbl_no]); - entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; - } - - return TRUE; -} - - -/* - * Generate the best Huffman code table for the given counts, fill htbl. - * Note this is also used by jcphuff.c. - * - * The JPEG standard requires that no symbol be assigned a codeword of all - * one bits (so that padding bits added at the end of a compressed segment - * can't look like a valid code). Because of the canonical ordering of - * codewords, this just means that there must be an unused slot in the - * longest codeword length category. Section K.2 of the JPEG spec suggests - * reserving such a slot by pretending that symbol 256 is a valid symbol - * with count 1. In theory that's not optimal; giving it count zero but - * including it in the symbol set anyway should give a better Huffman code. - * But the theoretically better code actually seems to come out worse in - * practice, because it produces more all-ones bytes (which incur stuffed - * zero bytes in the final file). In any case the difference is tiny. - * - * The JPEG standard requires Huffman codes to be no more than 16 bits long. - * If some symbols have a very small but nonzero probability, the Huffman tree - * must be adjusted to meet the code length restriction. We currently use - * the adjustment method suggested in JPEG section K.2. This method is *not* - * optimal; it may not choose the best possible limited-length code. But - * typically only very-low-frequency symbols will be given less-than-optimal - * lengths, so the code is almost optimal. Experimental comparisons against - * an optimal limited-length-code algorithm indicate that the difference is - * microscopic --- usually less than a hundredth of a percent of total size. - * So the extra complexity of an optimal algorithm doesn't seem worthwhile. - */ - -GLOBAL(void) -jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) -{ -#define MAX_CLEN 32 /* assumed maximum initial code length */ - UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ - int codesize[257]; /* codesize[k] = code length of symbol k */ - int others[257]; /* next symbol in current branch of tree */ - int c1, c2; - int p, i, j; - long v; - - /* This algorithm is explained in section K.2 of the JPEG standard */ - - MEMZERO(bits, SIZEOF(bits)); - MEMZERO(codesize, SIZEOF(codesize)); - for (i = 0; i < 257; i++) - others[i] = -1; /* init links to empty */ - - freq[256] = 1; /* make sure 256 has a nonzero count */ - /* Including the pseudo-symbol 256 in the Huffman procedure guarantees - * that no real symbol is given code-value of all ones, because 256 - * will be placed last in the largest codeword category. - */ - - /* Huffman's basic algorithm to assign optimal code lengths to symbols */ - - for (;;) { - /* Find the smallest nonzero frequency, set c1 = its symbol */ - /* In case of ties, take the larger symbol number */ - c1 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v) { - v = freq[i]; - c1 = i; - } - } - - /* Find the next smallest nonzero frequency, set c2 = its symbol */ - /* In case of ties, take the larger symbol number */ - c2 = -1; - v = 1000000000L; - for (i = 0; i <= 256; i++) { - if (freq[i] && freq[i] <= v && i != c1) { - v = freq[i]; - c2 = i; - } - } - - /* Done if we've merged everything into one frequency */ - if (c2 < 0) - break; - - /* Else merge the two counts/trees */ - freq[c1] += freq[c2]; - freq[c2] = 0; - - /* Increment the codesize of everything in c1's tree branch */ - codesize[c1]++; - while (others[c1] >= 0) { - c1 = others[c1]; - codesize[c1]++; - } - - others[c1] = c2; /* chain c2 onto c1's tree branch */ - - /* Increment the codesize of everything in c2's tree branch */ - codesize[c2]++; - while (others[c2] >= 0) { - c2 = others[c2]; - codesize[c2]++; - } - } - - /* Now count the number of symbols of each code length */ - for (i = 0; i <= 256; i++) { - if (codesize[i]) { - /* The JPEG standard seems to think that this can't happen, */ - /* but I'm paranoid... */ - if (codesize[i] > MAX_CLEN) - ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); - - bits[codesize[i]]++; - } - } - - /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure - * Huffman procedure assigned any such lengths, we must adjust the coding. - * Here is what the JPEG spec says about how this next bit works: - * Since symbols are paired for the longest Huffman code, the symbols are - * removed from this length category two at a time. The prefix for the pair - * (which is one bit shorter) is allocated to one of the pair; then, - * skipping the BITS entry for that prefix length, a code word from the next - * shortest nonzero BITS entry is converted into a prefix for two code words - * one bit longer. - */ - - for (i = MAX_CLEN; i > 16; i--) { - while (bits[i] > 0) { - j = i - 2; /* find length of new prefix to be used */ - while (bits[j] == 0) - j--; - - bits[i] -= 2; /* remove two symbols */ - bits[i-1]++; /* one goes in this length */ - bits[j+1] += 2; /* two new symbols in this length */ - bits[j]--; /* symbol of this length is now a prefix */ - } - } - - /* Remove the count for the pseudo-symbol 256 from the largest codelength */ - while (bits[i] == 0) /* find largest codelength still in use */ - i--; - bits[i]--; - - /* Return final symbol counts (only for lengths 0..16) */ - MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); - - /* Return a list of the symbols sorted by code length */ - /* It's not real clear to me why we don't need to consider the codelength - * changes made above, but the JPEG spec seems to think this works. - */ - p = 0; - for (i = 1; i <= MAX_CLEN; i++) { - for (j = 0; j <= 255; j++) { - if (codesize[j] == i) { - htbl->huffval[p] = (UINT8) j; - p++; - } - } - } - - /* Set sent_table FALSE so updated table will be written to JPEG file. */ - htbl->sent_table = FALSE; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF(void) -finish_pass_gather (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, dctbl, actbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - boolean did_dc[NUM_HUFF_TBLS]; - boolean did_ac[NUM_HUFF_TBLS]; - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - MEMZERO(did_dc, SIZEOF(did_dc)); - MEMZERO(did_ac, SIZEOF(did_ac)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - if (! did_dc[dctbl]) { - htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]); - did_dc[dctbl] = TRUE; - } - if (! did_ac[actbl]) { - htblptr = & cinfo->ac_huff_tbl_ptrs[actbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]); - did_ac[actbl] = TRUE; - } - } -} - - -#endif /* ENTROPY_OPT_SUPPORTED */ - - -/* - * Module initialization routine for Huffman entropy encoding. - */ - -GLOBAL(void) -jinit_huff_encoder (j_compress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_huff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; -#ifdef ENTROPY_OPT_SUPPORTED - entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; -#endif - } -} diff --git a/libjpegtwrp/jchuff.h b/libjpegtwrp/jchuff.h deleted file mode 100644 index a9599fc1e..000000000 --- a/libjpegtwrp/jchuff.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * jchuff.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy encoding routines - * that are shared between the sequential encoder (jchuff.c) and the - * progressive encoder (jcphuff.c). No other modules need to see these. - */ - -/* The legal range of a DCT coefficient is - * -1024 .. +1023 for 8-bit data; - * -16384 .. +16383 for 12-bit data. - * Hence the magnitude should always fit in 10 or 14 bits respectively. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MAX_COEF_BITS 10 -#else -#define MAX_COEF_BITS 14 -#endif - -/* Derived data constructed for each Huffman table */ - -typedef struct { - unsigned int ehufco[256]; /* code for each symbol */ - char ehufsi[256]; /* length of code for each symbol */ - /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ -} c_derived_tbl; - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_c_derived_tbl jMkCDerived -#define jpeg_gen_optimal_table jGenOptTbl -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Expand a Huffman table definition into the derived format */ -EXTERN(void) jpeg_make_c_derived_tbl - JPP((j_compress_ptr cinfo, boolean isDC, int tblno, - c_derived_tbl ** pdtbl)); - -/* Generate an optimal table definition given the specified counts */ -EXTERN(void) jpeg_gen_optimal_table - JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])); diff --git a/libjpegtwrp/jcinit.c b/libjpegtwrp/jcinit.c deleted file mode 100644 index 5efffe331..000000000 --- a/libjpegtwrp/jcinit.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * jcinit.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains initialization logic for the JPEG compressor. - * This routine is in charge of selecting the modules to be executed and - * making an initialization call to each one. - * - * Logically, this code belongs in jcmaster.c. It's split out because - * linking this routine implies linking the entire compression library. - * For a transcoding-only application, we want to be able to use jcmaster.c - * without linking in the whole library. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Master selection of compression modules. - * This is done once at the start of processing an image. We determine - * which modules will be used and give them appropriate initialization calls. - */ - -GLOBAL(void) -jinit_compress_master (j_compress_ptr cinfo) -{ - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, FALSE /* full compression */); - - /* Preprocessing */ - if (! cinfo->raw_data_in) { - jinit_color_converter(cinfo); - jinit_downsampler(cinfo); - jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); - } - /* Forward DCT */ - jinit_forward_dct(cinfo); - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - jinit_phuff_encoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_encoder(cinfo); - } - - /* Need a full-image coefficient buffer in any multi-pass mode. */ - jinit_c_coef_controller(cinfo, - (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); - jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} diff --git a/libjpegtwrp/jcmainct.c b/libjpegtwrp/jcmainct.c deleted file mode 100644 index 5b7ff21dc..000000000 --- a/libjpegtwrp/jcmainct.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * jcmainct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for compression. - * The main buffer lies between the pre-processor and the JPEG - * compressor proper; it holds downsampled data in the JPEG colorspace. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Note: currently, there is no operating mode in which a full-image buffer - * is needed at this step. If there were, that mode could not be used with - * "raw data" input, since this module is bypassed in that case. However, - * we've left the code here for possible use in special applications. - */ -#undef FULL_MAIN_BUFFER_SUPPORTED - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_main_controller pub; /* public fields */ - - JDIMENSION cur_iMCU_row; /* number of current iMCU row */ - JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ - boolean suspended; /* remember if we suspended output */ - J_BUF_MODE pass_mode; /* current operating mode */ - - /* If using just a strip buffer, this points to the entire set of buffers - * (we allocate one for each component). In the full-image case, this - * points to the currently accessible strips of the virtual arrays. - */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - -#ifdef FULL_MAIN_BUFFER_SUPPORTED - /* If using full-image storage, this array holds pointers to virtual-array - * control blocks for each component. Unused if not full-image storage. - */ - jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; -#endif -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - - -/* Forward declarations */ -METHODDEF(void) process_data_simple_main - JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); -#ifdef FULL_MAIN_BUFFER_SUPPORTED -METHODDEF(void) process_data_buffer_main - JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - - /* Do nothing in raw-data mode. */ - if (cinfo->raw_data_in) - return; - - main_ptr->cur_iMCU_row = 0; /* initialize counters */ - main_ptr->rowgroup_ctr = 0; - main_ptr->suspended = FALSE; - main_ptr->pass_mode = pass_mode; /* save mode for use by process_data */ - - switch (pass_mode) { - case JBUF_PASS_THRU: -#ifdef FULL_MAIN_BUFFER_SUPPORTED - if (main_ptr->whole_image[0] != NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - main_ptr->pub.process_data = process_data_simple_main; - break; -#ifdef FULL_MAIN_BUFFER_SUPPORTED - case JBUF_SAVE_SOURCE: - case JBUF_CRANK_DEST: - case JBUF_SAVE_AND_PASS: - if (main_ptr->whole_image[0] == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - main_ptr->pub.process_data = process_data_buffer_main; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This routine handles the simple pass-through mode, - * where we have only a strip buffer. - */ - -METHODDEF(void) -process_data_simple_main (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail) -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - - while (main_ptr->cur_iMCU_row < cinfo->total_iMCU_rows) { - /* Read input data if we haven't filled the main buffer yet */ - if (main_ptr->rowgroup_ctr < DCTSIZE) - (*cinfo->prep->pre_process_data) (cinfo, - input_buf, in_row_ctr, in_rows_avail, - main_ptr->buffer, &main_ptr->rowgroup_ctr, - (JDIMENSION) DCTSIZE); - - /* If we don't have a full iMCU row buffered, return to application for - * more data. Note that preprocessor will always pad to fill the iMCU row - * at the bottom of the image. - */ - if (main_ptr->rowgroup_ctr != DCTSIZE) - return; - - /* Send the completed row to the compressor */ - if (! (*cinfo->coef->compress_data) (cinfo, main_ptr->buffer)) { - /* If compressor did not consume the whole row, then we must need to - * suspend processing and return to the application. In this situation - * we pretend we didn't yet consume the last input row; otherwise, if - * it happened to be the last row of the image, the application would - * think we were done. - */ - if (! main_ptr->suspended) { - (*in_row_ctr)--; - main_ptr->suspended = TRUE; - } - return; - } - /* We did finish the row. Undo our little suspension hack if a previous - * call suspended; then mark the main buffer empty. - */ - if (main_ptr->suspended) { - (*in_row_ctr)++; - main_ptr->suspended = FALSE; - } - main_ptr->rowgroup_ctr = 0; - main_ptr->cur_iMCU_row++; - } -} - - -#ifdef FULL_MAIN_BUFFER_SUPPORTED - -/* - * Process some data. - * This routine handles all of the modes that use a full-size buffer. - */ - -METHODDEF(void) -process_data_buffer_main (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail) -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - int ci; - jpeg_component_info *compptr; - boolean writing = (main_ptr->pass_mode != JBUF_CRANK_DEST); - - while (main_ptr->cur_iMCU_row < cinfo->total_iMCU_rows) { - /* Realign the virtual buffers if at the start of an iMCU row. */ - if (main_ptr->rowgroup_ctr == 0) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main_ptr->buffer[ci] = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, main_ptr->whole_image[ci], - main_ptr->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE), - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing); - } - /* In a read pass, pretend we just read some source data. */ - if (! writing) { - *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE; - main_ptr->rowgroup_ctr = DCTSIZE; - } - } - - /* If a write pass, read input data until the current iMCU row is full. */ - /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ - if (writing) { - (*cinfo->prep->pre_process_data) (cinfo, - input_buf, in_row_ctr, in_rows_avail, - main_ptr->buffer, &main_ptr->rowgroup_ctr, - (JDIMENSION) DCTSIZE); - /* Return to application if we need more data to fill the iMCU row. */ - if (main_ptr->rowgroup_ctr < DCTSIZE) - return; - } - - /* Emit data, unless this is a sink-only pass. */ - if (main_ptr->pass_mode != JBUF_SAVE_SOURCE) { - if (! (*cinfo->coef->compress_data) (cinfo, main_ptr->buffer)) { - /* If compressor did not consume the whole row, then we must need to - * suspend processing and return to the application. In this situation - * we pretend we didn't yet consume the last input row; otherwise, if - * it happened to be the last row of the image, the application would - * think we were done. - */ - if (! main_ptr->suspended) { - (*in_row_ctr)--; - main_ptr->suspended = TRUE; - } - return; - } - /* We did finish the row. Undo our little suspension hack if a previous - * call suspended; then mark the main buffer empty. - */ - if (main_ptr->suspended) { - (*in_row_ctr)++; - main_ptr->suspended = FALSE; - } - } - - /* If get here, we are done with this iMCU row. Mark buffer empty. */ - main_ptr->rowgroup_ctr = 0; - main_ptr->cur_iMCU_row++; - } -} - -#endif /* FULL_MAIN_BUFFER_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL(void) -jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_main_ptr main_ptr; - int ci; - jpeg_component_info *compptr; - - main_ptr = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_c_main_controller *) main_ptr; - main_ptr->pub.start_pass = start_pass_main; - - /* We don't need to create a buffer in raw-data mode. */ - if (cinfo->raw_data_in) - return; - - /* Create the buffer. It holds downsampled data, so each component - * may be of a different size. - */ - if (need_full_buffer) { -#ifdef FULL_MAIN_BUFFER_SUPPORTED - /* Allocate a full-image virtual array for each component */ - /* Note we pad the bottom to a multiple of the iMCU height */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main_ptr->whole_image[ci] = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - compptr->width_in_blocks * DCTSIZE, - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor) * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); - } -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif - } else { -#ifdef FULL_MAIN_BUFFER_SUPPORTED - main_ptr->whole_image[0] = NULL; /* flag for no virtual arrays */ -#endif - /* Allocate a strip buffer for each component */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - main_ptr->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * DCTSIZE, - (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); - } - } -} diff --git a/libjpegtwrp/jcmarker.c b/libjpegtwrp/jcmarker.c deleted file mode 100644 index 3d1e6c6d5..000000000 --- a/libjpegtwrp/jcmarker.c +++ /dev/null @@ -1,664 +0,0 @@ -/* - * jcmarker.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write JPEG datastream markers. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* Private state */ - -typedef struct { - struct jpeg_marker_writer pub; /* public fields */ - - unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */ -} my_marker_writer; - -typedef my_marker_writer * my_marker_ptr; - - -/* - * Basic output routines. - * - * Note that we do not support suspension while writing a marker. - * Therefore, an application using suspension must ensure that there is - * enough buffer space for the initial markers (typ. 600-700 bytes) before - * calling jpeg_start_compress, and enough space to write the trailing EOI - * (a few bytes) before calling jpeg_finish_compress. Multipass compression - * modes are not supported at all with suspension, so those two are the only - * points where markers will be written. - */ - -LOCAL(void) -emit_byte (j_compress_ptr cinfo, int val) -/* Emit a byte */ -{ - struct jpeg_destination_mgr * dest = cinfo->dest; - - *(dest->next_output_byte)++ = (JOCTET) val; - if (--dest->free_in_buffer == 0) { - if (! (*dest->empty_output_buffer) (cinfo)) - ERREXIT(cinfo, JERR_CANT_SUSPEND); - } -} - - -LOCAL(void) -emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) -/* Emit a marker code */ -{ - emit_byte(cinfo, 0xFF); - emit_byte(cinfo, (int) mark); -} - - -LOCAL(void) -emit_2bytes (j_compress_ptr cinfo, int value) -/* Emit a 2-byte integer; these are always MSB first in JPEG files */ -{ - emit_byte(cinfo, (value >> 8) & 0xFF); - emit_byte(cinfo, value & 0xFF); -} - - -/* - * Routines to write specific marker types. - */ - -LOCAL(int) -emit_dqt (j_compress_ptr cinfo, int index) -/* Emit a DQT marker */ -/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ -{ - JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; - int prec; - int i; - - if (qtbl == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); - - prec = 0; - for (i = 0; i < DCTSIZE2; i++) { - if (qtbl->quantval[i] > 255) - prec = 1; - } - - if (! qtbl->sent_table) { - emit_marker(cinfo, M_DQT); - - emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2); - - emit_byte(cinfo, index + (prec<<4)); - - for (i = 0; i < DCTSIZE2; i++) { - /* The table entries must be emitted in zigzag order. */ - unsigned int qval = qtbl->quantval[jpeg_natural_order[i]]; - if (prec) - emit_byte(cinfo, (int) (qval >> 8)); - emit_byte(cinfo, (int) (qval & 0xFF)); - } - - qtbl->sent_table = TRUE; - } - - return prec; -} - - -LOCAL(void) -emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) -/* Emit a DHT marker */ -{ - JHUFF_TBL * htbl; - int length, i; - - if (is_ac) { - htbl = cinfo->ac_huff_tbl_ptrs[index]; - index += 0x10; /* output index has AC bit set */ - } else { - htbl = cinfo->dc_huff_tbl_ptrs[index]; - } - - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); - - if (! htbl->sent_table) { - emit_marker(cinfo, M_DHT); - - length = 0; - for (i = 1; i <= 16; i++) - length += htbl->bits[i]; - - emit_2bytes(cinfo, length + 2 + 1 + 16); - emit_byte(cinfo, index); - - for (i = 1; i <= 16; i++) - emit_byte(cinfo, htbl->bits[i]); - - for (i = 0; i < length; i++) - emit_byte(cinfo, htbl->huffval[i]); - - htbl->sent_table = TRUE; - } -} - - -LOCAL(void) -emit_dac (j_compress_ptr cinfo) -/* Emit a DAC marker */ -/* Since the useful info is so small, we want to emit all the tables in */ -/* one DAC marker. Therefore this routine does its own scan of the table. */ -{ -#ifdef C_ARITH_CODING_SUPPORTED - char dc_in_use[NUM_ARITH_TBLS]; - char ac_in_use[NUM_ARITH_TBLS]; - int length, i; - jpeg_component_info *compptr; - - for (i = 0; i < NUM_ARITH_TBLS; i++) - dc_in_use[i] = ac_in_use[i] = 0; - - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - dc_in_use[compptr->dc_tbl_no] = 1; - ac_in_use[compptr->ac_tbl_no] = 1; - } - - length = 0; - for (i = 0; i < NUM_ARITH_TBLS; i++) - length += dc_in_use[i] + ac_in_use[i]; - - emit_marker(cinfo, M_DAC); - - emit_2bytes(cinfo, length*2 + 2); - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - if (dc_in_use[i]) { - emit_byte(cinfo, i); - emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); - } - if (ac_in_use[i]) { - emit_byte(cinfo, i + 0x10); - emit_byte(cinfo, cinfo->arith_ac_K[i]); - } - } -#endif /* C_ARITH_CODING_SUPPORTED */ -} - - -LOCAL(void) -emit_dri (j_compress_ptr cinfo) -/* Emit a DRI marker */ -{ - emit_marker(cinfo, M_DRI); - - emit_2bytes(cinfo, 4); /* fixed length */ - - emit_2bytes(cinfo, (int) cinfo->restart_interval); -} - - -LOCAL(void) -emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) -/* Emit a SOF marker */ -{ - int ci; - jpeg_component_info *compptr; - - emit_marker(cinfo, code); - - emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ - - /* Make sure image isn't bigger than SOF field can handle */ - if ((long) cinfo->image_height > 65535L || - (long) cinfo->image_width > 65535L) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); - - emit_byte(cinfo, cinfo->data_precision); - emit_2bytes(cinfo, (int) cinfo->image_height); - emit_2bytes(cinfo, (int) cinfo->image_width); - - emit_byte(cinfo, cinfo->num_components); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - emit_byte(cinfo, compptr->component_id); - emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); - emit_byte(cinfo, compptr->quant_tbl_no); - } -} - - -LOCAL(void) -emit_sos (j_compress_ptr cinfo) -/* Emit a SOS marker */ -{ - int i, td, ta; - jpeg_component_info *compptr; - - emit_marker(cinfo, M_SOS); - - emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ - - emit_byte(cinfo, cinfo->comps_in_scan); - - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - emit_byte(cinfo, compptr->component_id); - td = compptr->dc_tbl_no; - ta = compptr->ac_tbl_no; - if (cinfo->progressive_mode) { - /* Progressive mode: only DC or only AC tables are used in one scan; - * furthermore, Huffman coding of DC refinement uses no table at all. - * We emit 0 for unused field(s); this is recommended by the P&M text - * but does not seem to be specified in the standard. - */ - if (cinfo->Ss == 0) { - ta = 0; /* DC scan */ - if (cinfo->Ah != 0 && !cinfo->arith_code) - td = 0; /* no DC table either */ - } else { - td = 0; /* AC scan */ - } - } - emit_byte(cinfo, (td << 4) + ta); - } - - emit_byte(cinfo, cinfo->Ss); - emit_byte(cinfo, cinfo->Se); - emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); -} - - -LOCAL(void) -emit_jfif_app0 (j_compress_ptr cinfo) -/* Emit a JFIF-compliant APP0 marker */ -{ - /* - * Length of APP0 block (2 bytes) - * Block ID (4 bytes - ASCII "JFIF") - * Zero byte (1 byte to terminate the ID string) - * Version Major, Minor (2 bytes - major first) - * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) - * Xdpu (2 bytes - dots per unit horizontal) - * Ydpu (2 bytes - dots per unit vertical) - * Thumbnail X size (1 byte) - * Thumbnail Y size (1 byte) - */ - - emit_marker(cinfo, M_APP0); - - emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ - - emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ - emit_byte(cinfo, 0x46); - emit_byte(cinfo, 0x49); - emit_byte(cinfo, 0x46); - emit_byte(cinfo, 0); - emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */ - emit_byte(cinfo, cinfo->JFIF_minor_version); - emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ - emit_2bytes(cinfo, (int) cinfo->X_density); - emit_2bytes(cinfo, (int) cinfo->Y_density); - emit_byte(cinfo, 0); /* No thumbnail image */ - emit_byte(cinfo, 0); -} - - -LOCAL(void) -emit_adobe_app14 (j_compress_ptr cinfo) -/* Emit an Adobe APP14 marker */ -{ - /* - * Length of APP14 block (2 bytes) - * Block ID (5 bytes - ASCII "Adobe") - * Version Number (2 bytes - currently 100) - * Flags0 (2 bytes - currently 0) - * Flags1 (2 bytes - currently 0) - * Color transform (1 byte) - * - * Although Adobe TN 5116 mentions Version = 101, all the Adobe files - * now in circulation seem to use Version = 100, so that's what we write. - * - * We write the color transform byte as 1 if the JPEG color space is - * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with - * whether the encoder performed a transformation, which is pretty useless. - */ - - emit_marker(cinfo, M_APP14); - - emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ - - emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ - emit_byte(cinfo, 0x64); - emit_byte(cinfo, 0x6F); - emit_byte(cinfo, 0x62); - emit_byte(cinfo, 0x65); - emit_2bytes(cinfo, 100); /* Version */ - emit_2bytes(cinfo, 0); /* Flags0 */ - emit_2bytes(cinfo, 0); /* Flags1 */ - switch (cinfo->jpeg_color_space) { - case JCS_YCbCr: - emit_byte(cinfo, 1); /* Color transform = 1 */ - break; - case JCS_YCCK: - emit_byte(cinfo, 2); /* Color transform = 2 */ - break; - default: - emit_byte(cinfo, 0); /* Color transform = 0 */ - break; - } -} - - -/* - * These routines allow writing an arbitrary marker with parameters. - * The only intended use is to emit COM or APPn markers after calling - * write_file_header and before calling write_frame_header. - * Other uses are not guaranteed to produce desirable results. - * Counting the parameter bytes properly is the caller's responsibility. - */ - -METHODDEF(void) -write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen) -/* Emit an arbitrary marker header */ -{ - if (datalen > (unsigned int) 65533) /* safety check */ - ERREXIT(cinfo, JERR_BAD_LENGTH); - - emit_marker(cinfo, (JPEG_MARKER) marker); - - emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ -} - -METHODDEF(void) -write_marker_byte (j_compress_ptr cinfo, int val) -/* Emit one byte of marker parameters following write_marker_header */ -{ - emit_byte(cinfo, val); -} - - -/* - * Write datastream header. - * This consists of an SOI and optional APPn markers. - * We recommend use of the JFIF marker, but not the Adobe marker, - * when using YCbCr or grayscale data. The JFIF marker should NOT - * be used for any other JPEG colorspace. The Adobe marker is helpful - * to distinguish RGB, CMYK, and YCCK colorspaces. - * Note that an application can write additional header markers after - * jpeg_start_compress returns. - */ - -METHODDEF(void) -write_file_header (j_compress_ptr cinfo) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - - emit_marker(cinfo, M_SOI); /* first the SOI */ - - /* SOI is defined to reset restart interval to 0 */ - marker->last_restart_interval = 0; - - if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ - emit_jfif_app0(cinfo); - if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ - emit_adobe_app14(cinfo); -} - - -/* - * Write frame header. - * This consists of DQT and SOFn markers. - * Note that we do not emit the SOF until we have emitted the DQT(s). - * This avoids compatibility problems with incorrect implementations that - * try to error-check the quant table numbers as soon as they see the SOF. - */ - -METHODDEF(void) -write_frame_header (j_compress_ptr cinfo) -{ - int ci, prec; - boolean is_baseline; - jpeg_component_info *compptr; - - /* Emit DQT for each quantization table. - * Note that emit_dqt() suppresses any duplicate tables. - */ - prec = 0; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - prec += emit_dqt(cinfo, compptr->quant_tbl_no); - } - /* now prec is nonzero iff there are any 16-bit quant tables. */ - - /* Check for a non-baseline specification. - * Note we assume that Huffman table numbers won't be changed later. - */ - if (cinfo->arith_code || cinfo->progressive_mode || - cinfo->data_precision != 8) { - is_baseline = FALSE; - } else { - is_baseline = TRUE; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) - is_baseline = FALSE; - } - if (prec && is_baseline) { - is_baseline = FALSE; - /* If it's baseline except for quantizer size, warn the user */ - TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); - } - } - - /* Emit the proper SOF marker */ - if (cinfo->arith_code) { - emit_sof(cinfo, M_SOF9); /* SOF code for arithmetic coding */ - } else { - if (cinfo->progressive_mode) - emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ - else if (is_baseline) - emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ - else - emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ - } -} - - -/* - * Write scan header. - * This consists of DHT or DAC markers, optional DRI, and SOS. - * Compressed data will be written following the SOS. - */ - -METHODDEF(void) -write_scan_header (j_compress_ptr cinfo) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - int i; - jpeg_component_info *compptr; - - if (cinfo->arith_code) { - /* Emit arith conditioning info. We may have some duplication - * if the file has multiple scans, but it's so small it's hardly - * worth worrying about. - */ - emit_dac(cinfo); - } else { - /* Emit Huffman tables. - * Note that emit_dht() suppresses any duplicate tables. - */ - for (i = 0; i < cinfo->comps_in_scan; i++) { - compptr = cinfo->cur_comp_info[i]; - if (cinfo->progressive_mode) { - /* Progressive mode: only DC or only AC tables are used in one scan */ - if (cinfo->Ss == 0) { - if (cinfo->Ah == 0) /* DC needs no table for refinement scan */ - emit_dht(cinfo, compptr->dc_tbl_no, FALSE); - } else { - emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } - } else { - /* Sequential mode: need both DC and AC tables */ - emit_dht(cinfo, compptr->dc_tbl_no, FALSE); - emit_dht(cinfo, compptr->ac_tbl_no, TRUE); - } - } - } - - /* Emit DRI if required --- note that DRI value could change for each scan. - * We avoid wasting space with unnecessary DRIs, however. - */ - if (cinfo->restart_interval != marker->last_restart_interval) { - emit_dri(cinfo); - marker->last_restart_interval = cinfo->restart_interval; - } - - emit_sos(cinfo); -} - - -/* - * Write datastream trailer. - */ - -METHODDEF(void) -write_file_trailer (j_compress_ptr cinfo) -{ - emit_marker(cinfo, M_EOI); -} - - -/* - * Write an abbreviated table-specification datastream. - * This consists of SOI, DQT and DHT tables, and EOI. - * Any table that is defined and not marked sent_table = TRUE will be - * emitted. Note that all tables will be marked sent_table = TRUE at exit. - */ - -METHODDEF(void) -write_tables_only (j_compress_ptr cinfo) -{ - int i; - - emit_marker(cinfo, M_SOI); - - for (i = 0; i < NUM_QUANT_TBLS; i++) { - if (cinfo->quant_tbl_ptrs[i] != NULL) - (void) emit_dqt(cinfo, i); - } - - if (! cinfo->arith_code) { - for (i = 0; i < NUM_HUFF_TBLS; i++) { - if (cinfo->dc_huff_tbl_ptrs[i] != NULL) - emit_dht(cinfo, i, FALSE); - if (cinfo->ac_huff_tbl_ptrs[i] != NULL) - emit_dht(cinfo, i, TRUE); - } - } - - emit_marker(cinfo, M_EOI); -} - - -/* - * Initialize the marker writer module. - */ - -GLOBAL(void) -jinit_marker_writer (j_compress_ptr cinfo) -{ - my_marker_ptr marker; - - /* Create the subobject */ - marker = (my_marker_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_marker_writer)); - cinfo->marker = (struct jpeg_marker_writer *) marker; - /* Initialize method pointers */ - marker->pub.write_file_header = write_file_header; - marker->pub.write_frame_header = write_frame_header; - marker->pub.write_scan_header = write_scan_header; - marker->pub.write_file_trailer = write_file_trailer; - marker->pub.write_tables_only = write_tables_only; - marker->pub.write_marker_header = write_marker_header; - marker->pub.write_marker_byte = write_marker_byte; - /* Initialize private state */ - marker->last_restart_interval = 0; -} diff --git a/libjpegtwrp/jcmaster.c b/libjpegtwrp/jcmaster.c deleted file mode 100644 index aab4020b8..000000000 --- a/libjpegtwrp/jcmaster.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * jcmaster.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG compressor. - * These routines are concerned with parameter validation, initial setup, - * and inter-pass control (determining the number of passes and the work - * to be done in each pass). - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef enum { - main_pass, /* input data, also do first output step */ - huff_opt_pass, /* Huffman code optimization pass */ - output_pass /* data output pass */ -} c_pass_type; - -typedef struct { - struct jpeg_comp_master pub; /* public fields */ - - c_pass_type pass_type; /* the type of the current pass */ - - int pass_number; /* # of passes completed */ - int total_passes; /* total # of passes needed */ - - int scan_number; /* current index in scan_info[] */ -} my_comp_master; - -typedef my_comp_master * my_master_ptr; - - -/* - * Support routines that do various essential calculations. - */ - -LOCAL(void) -initial_setup (j_compress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ - int ci; - jpeg_component_info *compptr; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Sanity check on image dimensions */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0 || cinfo->input_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* Width of an input scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Fill in the correct component_index value; don't rely on application */ - compptr->component_index = ci; - /* For compression, we never do DCT scaling. */ - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed (this flag isn't actually used for compression) */ - compptr->component_needed = TRUE; - } - - /* Compute number of fully interleaved MCU rows (number of times that - * main controller will call coefficient controller). - */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); -} - - -#ifdef C_MULTISCAN_FILES_SUPPORTED - -LOCAL(void) -validate_script (j_compress_ptr cinfo) -/* Verify that the scan script in cinfo->scan_info[] is valid; also - * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. - */ -{ - const jpeg_scan_info * scanptr; - int scanno, ncomps, ci, coefi, thisi; - int Ss, Se, Ah, Al; - boolean component_sent[MAX_COMPONENTS]; -#ifdef C_PROGRESSIVE_SUPPORTED - int * last_bitpos_ptr; - int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; - /* -1 until that coefficient has been seen; then last Al for it */ -#endif - - if (cinfo->num_scans <= 0) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); - - /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; - * for progressive JPEG, no scan can have this. - */ - scanptr = cinfo->scan_info; - if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { -#ifdef C_PROGRESSIVE_SUPPORTED - cinfo->progressive_mode = TRUE; - last_bitpos_ptr = & last_bitpos[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (coefi = 0; coefi < DCTSIZE2; coefi++) - *last_bitpos_ptr++ = -1; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - for (ci = 0; ci < cinfo->num_components; ci++) - component_sent[ci] = FALSE; - } - - for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { - /* Validate component indexes */ - ncomps = scanptr->comps_in_scan; - if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (thisi < 0 || thisi >= cinfo->num_components) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - /* Components must appear in SOF order within each scan */ - if (ci > 0 && thisi <= scanptr->component_index[ci-1]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - } - /* Validate progression parameters */ - Ss = scanptr->Ss; - Se = scanptr->Se; - Ah = scanptr->Ah; - Al = scanptr->Al; - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that - * seems wrong: the upper bound ought to depend on data precision. - * Perhaps they really meant 0..N+1 for N-bit precision. - * Here we allow 0..10 for 8-bit data; Al larger than 10 results in - * out-of-range reconstructed DC values during the first DC scan, - * which might cause problems for some decoders. - */ -#if BITS_IN_JSAMPLE == 8 -#define MAX_AH_AL 10 -#else -#define MAX_AH_AL 13 -#endif - if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || - Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - if (Ss == 0) { - if (Se != 0) /* DC and AC together not OK */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - if (ncomps != 1) /* AC scans must be for only one component */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - for (ci = 0; ci < ncomps; ci++) { - last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; - if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - for (coefi = Ss; coefi <= Se; coefi++) { - if (last_bitpos_ptr[coefi] < 0) { - /* first scan of this coefficient */ - if (Ah != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - /* not first scan */ - if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - last_bitpos_ptr[coefi] = Al; - } - } -#endif - } else { - /* For sequential JPEG, all progression parameters must be these: */ - if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - /* Make sure components are not sent twice */ - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (component_sent[thisi]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - component_sent[thisi] = TRUE; - } - } - } - - /* Now verify that everything got sent. */ - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - /* For progressive mode, we only check that at least some DC data - * got sent for each component; the spec does not require that all bits - * of all coefficients be transmitted. Would it be wiser to enforce - * transmission of all coefficient bits?? - */ - for (ci = 0; ci < cinfo->num_components; ci++) { - if (last_bitpos[ci][0] < 0) - ERREXIT(cinfo, JERR_MISSING_DATA); - } -#endif - } else { - for (ci = 0; ci < cinfo->num_components; ci++) { - if (! component_sent[ci]) - ERREXIT(cinfo, JERR_MISSING_DATA); - } - } -} - -#endif /* C_MULTISCAN_FILES_SUPPORTED */ - - -LOCAL(void) -select_scan_parameters (j_compress_ptr cinfo) -/* Set up the scan parameters for the current scan */ -{ - int ci; - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (cinfo->scan_info != NULL) { - /* Prepare for current scan --- the script is already validated */ - my_master_ptr master = (my_master_ptr) cinfo->master; - const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; - - cinfo->comps_in_scan = scanptr->comps_in_scan; - for (ci = 0; ci < scanptr->comps_in_scan; ci++) { - cinfo->cur_comp_info[ci] = - &cinfo->comp_info[scanptr->component_index[ci]]; - } - cinfo->Ss = scanptr->Ss; - cinfo->Se = scanptr->Se; - cinfo->Ah = scanptr->Ah; - cinfo->Al = scanptr->Al; - } - else -#endif - { - /* Prepare for single sequential-JPEG scan containing all components */ - if (cinfo->num_components > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPS_IN_SCAN); - cinfo->comps_in_scan = cinfo->num_components; - for (ci = 0; ci < cinfo->num_components; ci++) { - cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; - } - cinfo->Ss = 0; - cinfo->Se = DCTSIZE2-1; - cinfo->Ah = 0; - cinfo->Al = 0; - } -} - - -LOCAL(void) -per_scan_setup (j_compress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = DCTSIZE; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } - - /* Convert restart specified in rows to actual MCU count. */ - /* Note that count must fit in 16 bits, so we provide limiting. */ - if (cinfo->restart_in_rows > 0) { - long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; - cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); - } -} - - -/* - * Per-pass setup. - * This is called at the beginning of each pass. We determine which modules - * will be active during this pass and give them appropriate start_pass calls. - * We also set is_last_pass to indicate whether any more passes will be - * required. - */ - -METHODDEF(void) -prepare_for_pass (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - switch (master->pass_type) { - case main_pass: - /* Initial pass: will collect input data, and do either Huffman - * optimization or data output for the first scan. - */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (! cinfo->raw_data_in) { - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->downsample->start_pass) (cinfo); - (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); - } - (*cinfo->fdct->start_pass) (cinfo); - (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); - (*cinfo->coef->start_pass) (cinfo, - (master->total_passes > 1 ? - JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - if (cinfo->optimize_coding) { - /* No immediate data output; postpone writing frame/scan headers */ - master->pub.call_pass_startup = FALSE; - } else { - /* Will write frame/scan headers at first jpeg_write_scanlines call */ - master->pub.call_pass_startup = TRUE; - } - break; -#ifdef ENTROPY_OPT_SUPPORTED - case huff_opt_pass: - /* Do Huffman optimization for a scan after the first one. */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) { - (*cinfo->entropy->start_pass) (cinfo, TRUE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - master->pub.call_pass_startup = FALSE; - break; - } - /* Special case: Huffman DC refinement scans need no Huffman table - * and therefore we can skip the optimization pass for them. - */ - master->pass_type = output_pass; - master->pass_number++; - /*FALLTHROUGH*/ -#endif - case output_pass: - /* Do a data-output pass. */ - /* We need not repeat per-scan setup if prior optimization pass did it. */ - if (! cinfo->optimize_coding) { - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - } - (*cinfo->entropy->start_pass) (cinfo, FALSE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - /* We emit frame/scan headers now */ - if (master->scan_number == 0) - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); - master->pub.call_pass_startup = FALSE; - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - } - - master->pub.is_last_pass = (master->pass_number == master->total_passes-1); - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->total_passes; - } -} - - -/* - * Special start-of-pass hook. - * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. - * In single-pass processing, we need this hook because we don't want to - * write frame/scan headers during jpeg_start_compress; we want to let the - * application write COM markers etc. between jpeg_start_compress and the - * jpeg_write_scanlines loop. - * In multi-pass processing, this routine is not used. - */ - -METHODDEF(void) -pass_startup (j_compress_ptr cinfo) -{ - cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ - - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); -} - - -/* - * Finish up at end of pass. - */ - -METHODDEF(void) -finish_pass_master (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* The entropy coder always needs an end-of-pass call, - * either to analyze statistics or to flush its output buffer. - */ - (*cinfo->entropy->finish_pass) (cinfo); - - /* Update state for next pass */ - switch (master->pass_type) { - case main_pass: - /* next pass is either output of scan 0 (after optimization) - * or output of scan 1 (if no optimization). - */ - master->pass_type = output_pass; - if (! cinfo->optimize_coding) - master->scan_number++; - break; - case huff_opt_pass: - /* next pass is always output of current scan */ - master->pass_type = output_pass; - break; - case output_pass: - /* next pass is either optimization or output of next scan */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - master->scan_number++; - break; - } - - master->pass_number++; -} - - -/* - * Initialize master compression control. - */ - -GLOBAL(void) -jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_comp_master)); - cinfo->master = (struct jpeg_comp_master *) master; - master->pub.prepare_for_pass = prepare_for_pass; - master->pub.pass_startup = pass_startup; - master->pub.finish_pass = finish_pass_master; - master->pub.is_last_pass = FALSE; - - /* Validate parameters, determine derived values */ - initial_setup(cinfo); - - if (cinfo->scan_info != NULL) { -#ifdef C_MULTISCAN_FILES_SUPPORTED - validate_script(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - cinfo->num_scans = 1; - } - - if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */ - cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */ - - /* Initialize my private state */ - if (transcode_only) { - /* no main pass in transcoding */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - else - master->pass_type = output_pass; - } else { - /* for normal compression, first pass is always this type: */ - master->pass_type = main_pass; - } - master->scan_number = 0; - master->pass_number = 0; - if (cinfo->optimize_coding) - master->total_passes = cinfo->num_scans * 2; - else - master->total_passes = cinfo->num_scans; -} diff --git a/libjpegtwrp/jcomapi.c b/libjpegtwrp/jcomapi.c deleted file mode 100644 index 9b1fa7568..000000000 --- a/libjpegtwrp/jcomapi.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * jcomapi.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface routines that are used for both - * compression and decompression. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Abort processing of a JPEG compression or decompression operation, - * but don't destroy the object itself. - * - * For this, we merely clean up all the nonpermanent memory pools. - * Note that temp files (virtual arrays) are not allowed to belong to - * the permanent pool, so we will be able to close all temp files here. - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL(void) -jpeg_abort (j_common_ptr cinfo) -{ - int pool; - - /* Do nothing if called on a not-initialized or destroyed JPEG object. */ - if (cinfo->mem == NULL) - return; - - /* Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { - (*cinfo->mem->free_pool) (cinfo, pool); - } - - /* Reset overall state for possible reuse of object */ - if (cinfo->is_decompressor) { - cinfo->global_state = DSTATE_START; - /* Try to keep application from accessing now-deleted marker list. - * A bit kludgy to do it here, but this is the most central place. - */ - ((j_decompress_ptr) cinfo)->marker_list = NULL; - } else { - cinfo->global_state = CSTATE_START; - } -} - - -/* - * Destruction of a JPEG object. - * - * Everything gets deallocated except the master jpeg_compress_struct itself - * and the error manager struct. Both of these are supplied by the application - * and must be freed, if necessary, by the application. (Often they are on - * the stack and so don't need to be freed anyway.) - * Closing a data source or destination, if necessary, is the application's - * responsibility. - */ - -GLOBAL(void) -jpeg_destroy (j_common_ptr cinfo) -{ - /* We need only tell the memory manager to release everything. */ - /* NB: mem pointer is NULL if memory mgr failed to initialize. */ - if (cinfo->mem != NULL) - (*cinfo->mem->self_destruct) (cinfo); - cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ - cinfo->global_state = 0; /* mark it destroyed */ -} - - -/* - * Convenience routines for allocating quantization and Huffman tables. - * (Would jutils.c be a more reasonable place to put these?) - */ - -GLOBAL(JQUANT_TBL *) -jpeg_alloc_quant_table (j_common_ptr cinfo) -{ - JQUANT_TBL *tbl; - - tbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} - - -GLOBAL(JHUFF_TBL *) -jpeg_alloc_huff_table (j_common_ptr cinfo) -{ - JHUFF_TBL *tbl; - - tbl = (JHUFF_TBL *) - (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); - tbl->sent_table = FALSE; /* make sure this is false in any new table */ - return tbl; -} diff --git a/libjpegtwrp/jconfig.bcc b/libjpegtwrp/jconfig.bcc deleted file mode 100644 index c6c53ff63..000000000 --- a/libjpegtwrp/jconfig.bcc +++ /dev/null @@ -1,48 +0,0 @@ -/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#ifdef __MSDOS__ -#define NEED_FAR_POINTERS /* for small or medium memory model */ -#endif -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */ - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#ifdef __MSDOS__ -#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ -#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ -#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */ -#endif - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define USE_SETMODE /* Borland has setmode() */ -#ifdef __MSDOS__ -#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ -#endif -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.cfg b/libjpegtwrp/jconfig.cfg deleted file mode 100644 index 36a04fa84..000000000 --- a/libjpegtwrp/jconfig.cfg +++ /dev/null @@ -1,44 +0,0 @@ -/* jconfig.cfg --- source file edited by configure script */ -/* see jconfig.doc for explanations */ - -#undef HAVE_PROTOTYPES -#undef HAVE_UNSIGNED_CHAR -#undef HAVE_UNSIGNED_SHORT -#undef void -#undef const -#undef CHAR_IS_UNSIGNED -#undef HAVE_STDDEF_H -#undef HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -/* Define this if you get warnings about undefined structures. */ -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED -#undef INLINE -/* These are for configuring the JPEG memory manager. */ -#undef DEFAULT_MAX_MEM -#undef NO_MKTEMP - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE - -/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ -#undef PROGRESS_REPORT - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.dj b/libjpegtwrp/jconfig.dj deleted file mode 100644 index f759a9dbd..000000000 --- a/libjpegtwrp/jconfig.dj +++ /dev/null @@ -1,38 +0,0 @@ -/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Needed to make one-file style work in DJGPP */ -#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.doc b/libjpegtwrp/jconfig.doc deleted file mode 100644 index c18d1c064..000000000 --- a/libjpegtwrp/jconfig.doc +++ /dev/null @@ -1,155 +0,0 @@ -/* - * jconfig.doc - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file documents the configuration options that are required to - * customize the JPEG software for a particular system. - * - * The actual configuration options for a particular installation are stored - * in jconfig.h. On many machines, jconfig.h can be generated automatically - * or copied from one of the "canned" jconfig files that we supply. But if - * you need to generate a jconfig.h file by hand, this file tells you how. - * - * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. - * EDIT A COPY NAMED JCONFIG.H. - */ - - -/* - * These symbols indicate the properties of your machine or compiler. - * #define the symbol if yes, #undef it if no. - */ - -/* Does your compiler support function prototypes? - * (If not, you also need to use ansi2knr, see install.doc) - */ -#define HAVE_PROTOTYPES - -/* Does your compiler support the declaration "unsigned char" ? - * How about "unsigned short" ? - */ -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT - -/* Define "void" as "char" if your compiler doesn't know about type void. - * NOTE: be sure to define void such that "void *" represents the most general - * pointer type, e.g., that returned by malloc(). - */ -/* #define void char */ - -/* Define "const" as empty if your compiler doesn't know the "const" keyword. - */ -/* #define const */ - -/* Define this if an ordinary "char" type is unsigned. - * If you're not sure, leaving it undefined will work at some cost in speed. - * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. - */ -#undef CHAR_IS_UNSIGNED - -/* Define this if your system has an ANSI-conforming file. - */ -#define HAVE_STDDEF_H - -/* Define this if your system has an ANSI-conforming file. - */ -#define HAVE_STDLIB_H - -/* Define this if your system does not have an ANSI/SysV , - * but does have a BSD-style . - */ -#undef NEED_BSD_STRINGS - -/* Define this if your system does not provide typedef size_t in any of the - * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in - * instead. - */ -#undef NEED_SYS_TYPES_H - -/* For 80x86 machines, you need to define NEED_FAR_POINTERS, - * unless you are using a large-data memory model or 80386 flat-memory mode. - * On less brain-damaged CPUs this symbol must not be defined. - * (Defining this symbol causes large data structures to be referenced through - * "far" pointers and to be allocated with a special version of malloc.) - */ -#undef NEED_FAR_POINTERS - -/* Define this if your linker needs global names to be unique in less - * than the first 15 characters. - */ -#undef NEED_SHORT_EXTERNAL_NAMES - -/* Although a real ANSI C compiler can deal perfectly well with pointers to - * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI - * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, - * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you - * actually get "missing structure definition" warnings or errors while - * compiling the JPEG code. - */ -#undef INCOMPLETE_TYPES_BROKEN - - -/* - * The following options affect code selection within the JPEG library, - * but they don't need to be visible to applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS has been defined. - */ - -#ifdef JPEG_INTERNALS - -/* Define this if your compiler implements ">>" on signed values as a logical - * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, - * which is the normal and rational definition. - */ -#undef RIGHT_SHIFT_IS_UNSIGNED - - -#endif /* JPEG_INTERNALS */ - - -/* - * The remaining options do not affect the JPEG library proper, - * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). - * Other applications can ignore these. - */ - -#ifdef JPEG_CJPEG_DJPEG - -/* These defines indicate which image (non-JPEG) file formats are allowed. */ - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -/* Define this if you want to name both input and output files on the command - * line, rather than using stdout and optionally stdin. You MUST do this if - * your system can't cope with binary I/O to stdin/stdout. See comments at - * head of cjpeg.c or djpeg.c. - */ -#undef TWO_FILE_COMMANDLINE - -/* Define this if your system needs explicit cleanup of temporary files. - * This is crucial under MS-DOS, where the temporary "files" may be areas - * of extended memory; on most other systems it's not as important. - */ -#undef NEED_SIGNAL_CATCHER - -/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). - * This is necessary on systems that distinguish text files from binary files, - * and is harmless on most systems that don't. If you have one of the rare - * systems that complains about the "b" spec, define this symbol. - */ -#undef DONT_USE_B_MODE - -/* Define this if you want percent-done progress reports from cjpeg/djpeg. - */ -#undef PROGRESS_REPORT - - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.h b/libjpegtwrp/jconfig.h deleted file mode 100644 index 15a98177b..000000000 --- a/libjpegtwrp/jconfig.h +++ /dev/null @@ -1,156 +0,0 @@ -/* android jconfig.h */ -/* - * jconfig.doc - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file documents the configuration options that are required to - * customize the JPEG software for a particular system. - * - * The actual configuration options for a particular installation are stored - * in jconfig.h. On many machines, jconfig.h can be generated automatically - * or copied from one of the "canned" jconfig files that we supply. But if - * you need to generate a jconfig.h file by hand, this file tells you how. - * - * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. - * EDIT A COPY NAMED JCONFIG.H. - */ - - -/* - * These symbols indicate the properties of your machine or compiler. - * #define the symbol if yes, #undef it if no. - */ - -/* Does your compiler support function prototypes? - * (If not, you also need to use ansi2knr, see install.doc) - */ -#define HAVE_PROTOTYPES - -/* Does your compiler support the declaration "unsigned char" ? - * How about "unsigned short" ? - */ -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT - -/* Define "void" as "char" if your compiler doesn't know about type void. - * NOTE: be sure to define void such that "void *" represents the most general - * pointer type, e.g., that returned by malloc(). - */ -/* #define void char */ - -/* Define "const" as empty if your compiler doesn't know the "const" keyword. - */ -/* #define const */ - -/* Define this if an ordinary "char" type is unsigned. - * If you're not sure, leaving it undefined will work at some cost in speed. - * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. - */ -#undef CHAR_IS_UNSIGNED - -/* Define this if your system has an ANSI-conforming file. - */ -#define HAVE_STDDEF_H - -/* Define this if your system has an ANSI-conforming file. - */ -#define HAVE_STDLIB_H - -/* Define this if your system does not have an ANSI/SysV , - * but does have a BSD-style . - */ -#undef NEED_BSD_STRINGS - -/* Define this if your system does not provide typedef size_t in any of the - * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in - * instead. - */ -#undef NEED_SYS_TYPES_H - -/* For 80x86 machines, you need to define NEED_FAR_POINTERS, - * unless you are using a large-data memory model or 80386 flat-memory mode. - * On less brain-damaged CPUs this symbol must not be defined. - * (Defining this symbol causes large data structures to be referenced through - * "far" pointers and to be allocated with a special version of malloc.) - */ -#undef NEED_FAR_POINTERS - -/* Define this if your linker needs global names to be unique in less - * than the first 15 characters. - */ -#undef NEED_SHORT_EXTERNAL_NAMES - -/* Although a real ANSI C compiler can deal perfectly well with pointers to - * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI - * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, - * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you - * actually get "missing structure definition" warnings or errors while - * compiling the JPEG code. - */ -#undef INCOMPLETE_TYPES_BROKEN - - -/* - * The following options affect code selection within the JPEG library, - * but they don't need to be visible to applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS has been defined. - */ - -#ifdef JPEG_INTERNALS - -/* Define this if your compiler implements ">>" on signed values as a logical - * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, - * which is the normal and rational definition. - */ -#undef RIGHT_SHIFT_IS_UNSIGNED - - -#endif /* JPEG_INTERNALS */ - - -/* - * The remaining options do not affect the JPEG library proper, - * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). - * Other applications can ignore these. - */ - -#ifdef JPEG_CJPEG_DJPEG - -/* These defines indicate which image (non-JPEG) file formats are allowed. */ - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -/* Define this if you want to name both input and output files on the command - * line, rather than using stdout and optionally stdin. You MUST do this if - * your system can't cope with binary I/O to stdin/stdout. See comments at - * head of cjpeg.c or djpeg.c. - */ -#undef TWO_FILE_COMMANDLINE - -/* Define this if your system needs explicit cleanup of temporary files. - * This is crucial under MS-DOS, where the temporary "files" may be areas - * of extended memory; on most other systems it's not as important. - */ -#undef NEED_SIGNAL_CATCHER - -/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). - * This is necessary on systems that distinguish text files from binary files, - * and is harmless on most systems that don't. If you have one of the rare - * systems that complains about the "b" spec, define this symbol. - */ -#undef DONT_USE_B_MODE - -/* Define this if you want percent-done progress reports from cjpeg/djpeg. - */ -#undef PROGRESS_REPORT - - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.mac b/libjpegtwrp/jconfig.mac deleted file mode 100644 index 0de3efe24..000000000 --- a/libjpegtwrp/jconfig.mac +++ /dev/null @@ -1,43 +0,0 @@ -/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */ - -#define ALIGN_TYPE long /* Needed for 680x0 Macs */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define USE_CCOMMAND /* Command line reader for Macintosh */ -#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */ - -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.manx b/libjpegtwrp/jconfig.manx deleted file mode 100644 index 6dd0d008e..000000000 --- a/libjpegtwrp/jconfig.manx +++ /dev/null @@ -1,43 +0,0 @@ -/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ - -#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#define signal_catcher _abort /* hack for Aztec C naming requirements */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.mc6 b/libjpegtwrp/jconfig.mc6 deleted file mode 100644 index c55082df4..000000000 --- a/libjpegtwrp/jconfig.mc6 +++ /dev/null @@ -1,52 +0,0 @@ -/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#define NEED_FAR_POINTERS /* for small or medium memory model */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ - -#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ - -#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */ - -#define NEED_FHEAPMIN /* far heap management routines are broken */ - -#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */ -/* Note: the above define is known to improve the code with Microsoft C 6.00A. - * I do not know whether it is good for later compiler versions. - * Please report any info on this point to jpeg-info@uunet.uu.net. - */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define USE_SETMODE /* Microsoft has setmode() */ -#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.sas b/libjpegtwrp/jconfig.sas deleted file mode 100644 index efdac2229..000000000 --- a/libjpegtwrp/jconfig.sas +++ /dev/null @@ -1,43 +0,0 @@ -/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ - -#define NO_MKTEMP /* SAS C doesn't have mktemp() */ - -#define SHORTxSHORT_32 /* produces better DCT code with SAS C */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE -#define NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.st b/libjpegtwrp/jconfig.st deleted file mode 100644 index 4421b7a1a..000000000 --- a/libjpegtwrp/jconfig.st +++ /dev/null @@ -1,42 +0,0 @@ -/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */ - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#define ALIGN_TYPE long /* apparently double is a weird size? */ - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */ -/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define - * USE_SETMODE. Some Atari compilers require it, some do not. - */ -#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.vc b/libjpegtwrp/jconfig.vc deleted file mode 100644 index 7e291c75b..000000000 --- a/libjpegtwrp/jconfig.vc +++ /dev/null @@ -1,45 +0,0 @@ -/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -/* Define "boolean" as unsigned char, not int, per Windows custom */ -#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ -typedef unsigned char boolean; -#endif -#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ - - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Microsoft has setmode() */ -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.vms b/libjpegtwrp/jconfig.vms deleted file mode 100644 index 55a6ffba5..000000000 --- a/libjpegtwrp/jconfig.vms +++ /dev/null @@ -1,37 +0,0 @@ -/* jconfig.vms --- jconfig.h for use on Digital VMS. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#undef CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#define TWO_FILE_COMMANDLINE /* Needed on VMS */ -#undef NEED_SIGNAL_CATCHER -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jconfig.wat b/libjpegtwrp/jconfig.wat deleted file mode 100644 index 6cc545bae..000000000 --- a/libjpegtwrp/jconfig.wat +++ /dev/null @@ -1,38 +0,0 @@ -/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ -/* see jconfig.doc for explanations */ - -#define HAVE_PROTOTYPES -#define HAVE_UNSIGNED_CHAR -#define HAVE_UNSIGNED_SHORT -/* #define void char */ -/* #define const */ -#define CHAR_IS_UNSIGNED -#define HAVE_STDDEF_H -#define HAVE_STDLIB_H -#undef NEED_BSD_STRINGS -#undef NEED_SYS_TYPES_H -#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ -#undef NEED_SHORT_EXTERNAL_NAMES -#undef INCOMPLETE_TYPES_BROKEN - -#ifdef JPEG_INTERNALS - -#undef RIGHT_SHIFT_IS_UNSIGNED - -#endif /* JPEG_INTERNALS */ - -#ifdef JPEG_CJPEG_DJPEG - -#define BMP_SUPPORTED /* BMP image file format */ -#define GIF_SUPPORTED /* GIF image file format */ -#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ -#undef RLE_SUPPORTED /* Utah RLE image file format */ -#define TARGA_SUPPORTED /* Targa image file format */ - -#undef TWO_FILE_COMMANDLINE /* optional */ -#define USE_SETMODE /* Needed to make one-file style work in Watcom */ -#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ -#undef DONT_USE_B_MODE -#undef PROGRESS_REPORT /* optional */ - -#endif /* JPEG_CJPEG_DJPEG */ diff --git a/libjpegtwrp/jcparam.c b/libjpegtwrp/jcparam.c deleted file mode 100644 index a8dcf6154..000000000 --- a/libjpegtwrp/jcparam.c +++ /dev/null @@ -1,614 +0,0 @@ -/* - * jcparam.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains optional default-setting code for the JPEG compressor. - * Applications do not have to use this file, but those that don't use it - * must know a lot more about the innards of the JPEG code. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Quantization table setup routines - */ - -GLOBAL(void) -jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, boolean force_baseline) -/* Define a quantization table equal to the basic_table times - * a scale factor (given as a percentage). - * If force_baseline is TRUE, the computed quantization table entries - * are limited to 1..255 for JPEG baseline compatibility. - */ -{ - JQUANT_TBL ** qtblptr; - int i; - long temp; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); - - qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; - - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); - - for (i = 0; i < DCTSIZE2; i++) { - temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; - /* limit the values to the valid range */ - if (temp <= 0L) temp = 1L; - if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ - if (force_baseline && temp > 255L) - temp = 255L; /* limit to baseline range if requested */ - (*qtblptr)->quantval[i] = (UINT16) temp; - } - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*qtblptr)->sent_table = FALSE; -} - - -GLOBAL(void) -jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables - * and a straight percentage-scaling quality scale. In most cases it's better - * to use jpeg_set_quality (below); this entry point is provided for - * applications that insist on a linear percentage scaling. - */ -{ - /* These are the sample quantization tables given in JPEG spec section K.1. - * The spec says that the values given produce "good" quality, and - * when divided by 2, "very good" quality. - */ - static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { - 16, 11, 10, 16, 24, 40, 51, 61, - 12, 12, 14, 19, 26, 58, 60, 55, - 14, 13, 16, 24, 40, 57, 69, 56, - 14, 17, 22, 29, 51, 87, 80, 62, - 18, 22, 37, 56, 68, 109, 103, 77, - 24, 35, 55, 64, 81, 104, 113, 92, - 49, 64, 78, 87, 103, 121, 120, 101, - 72, 92, 95, 98, 112, 100, 103, 99 - }; - static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { - 17, 18, 24, 47, 99, 99, 99, 99, - 18, 21, 26, 66, 99, 99, 99, 99, - 24, 26, 56, 99, 99, 99, 99, 99, - 47, 66, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99 - }; - - /* Set up two quantization tables using the specified scaling */ - jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, - scale_factor, force_baseline); - jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, - scale_factor, force_baseline); -} - - -GLOBAL(int) -jpeg_quality_scaling (int quality) -/* Convert a user-specified quality rating to a percentage scaling factor - * for an underlying quantization table, using our recommended scaling curve. - * The input 'quality' factor should be 0 (terrible) to 100 (very good). - */ -{ - /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ - if (quality <= 0) quality = 1; - if (quality > 100) quality = 100; - - /* The basic table is used as-is (scaling 100) for a quality of 50. - * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; - * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table - * to make all the table entries 1 (hence, minimum quantization loss). - * Qualities 1..50 are converted to scaling percentage 5000/Q. - */ - if (quality < 50) - quality = 5000 / quality; - else - quality = 200 - quality*2; - - return quality; -} - - -GLOBAL(void) -jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) -/* Set or change the 'quality' (quantization) setting, using default tables. - * This is the standard quality-adjusting entry point for typical user - * interfaces; only those who want detailed control over quantization tables - * would use the preceding three routines directly. - */ -{ - /* Convert user 0-100 rating to percentage scaling */ - quality = jpeg_quality_scaling(quality); - - /* Set up standard quality tables */ - jpeg_set_linear_quality(cinfo, quality, force_baseline); -} - - -/* - * Huffman table setup routines - */ - -LOCAL(void) -add_huff_table (j_compress_ptr cinfo, - JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) -/* Define a Huffman table */ -{ - int nsymbols, len; - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - /* Copy the number-of-symbols-of-each-code-length counts */ - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - - /* Validate the counts. We do this here mainly so we can copy the right - * number of symbols from the val[] array, without risking marching off - * the end of memory. jchuff.c will do a more thorough test later. - */ - nsymbols = 0; - for (len = 1; len <= 16; len++) - nsymbols += bits[len]; - if (nsymbols < 1 || nsymbols > 256) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - - MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); - - /* Initialize sent_table FALSE so table will be written to JPEG file. */ - (*htblptr)->sent_table = FALSE; -} - - -LOCAL(void) -std_huff_tables (j_compress_ptr cinfo) -/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ -/* IMPORTANT: these are only valid for 8-bit data precision! */ -{ - static const UINT8 bits_dc_luminance[17] = - { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_luminance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_dc_chrominance[17] = - { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; - static const UINT8 val_dc_chrominance[] = - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; - - static const UINT8 bits_ac_luminance[17] = - { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; - static const UINT8 val_ac_luminance[] = - { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, - 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, - 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, - 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, - 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, - 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, - 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, - 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, - 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, - 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, - 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, - 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, - 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, - 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, - 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, - 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, - 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, - 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - static const UINT8 bits_ac_chrominance[17] = - { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; - static const UINT8 val_ac_chrominance[] = - { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, - 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, - 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, - 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, - 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, - 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, - 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, - 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, - 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, - 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, - 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, - 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, - 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, - 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, - 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, - 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, - 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa }; - - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], - bits_dc_luminance, val_dc_luminance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], - bits_ac_luminance, val_ac_luminance); - add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], - bits_dc_chrominance, val_dc_chrominance); - add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], - bits_ac_chrominance, val_ac_chrominance); -} - - -/* - * Default parameter setup for compression. - * - * Applications that don't choose to use this routine must do their - * own setup of all these parameters. Alternately, you can call this - * to establish defaults and then alter parameters selectively. This - * is the recommended approach since, if we add any new parameters, - * your code will still work (they'll be set to reasonable defaults). - */ - -GLOBAL(void) -jpeg_set_defaults (j_compress_ptr cinfo) -{ - int i; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Allocate comp_info array large enough for maximum component count. - * Array is made permanent in case application wants to compress - * multiple images at same param settings. - */ - if (cinfo->comp_info == NULL) - cinfo->comp_info = (jpeg_component_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - MAX_COMPONENTS * SIZEOF(jpeg_component_info)); - - /* Initialize everything not dependent on the color space */ - - cinfo->data_precision = BITS_IN_JSAMPLE; - /* Set up two quantization tables using default quality of 75 */ - jpeg_set_quality(cinfo, 75, TRUE); - /* Set up two Huffman tables */ - std_huff_tables(cinfo); - - /* Initialize default arithmetic coding conditioning */ - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - - /* Default is no multiple-scan output */ - cinfo->scan_info = NULL; - cinfo->num_scans = 0; - - /* Expect normal source image, not raw downsampled data */ - cinfo->raw_data_in = FALSE; - - /* Use Huffman coding, not arithmetic coding, by default */ - cinfo->arith_code = FALSE; - - /* By default, don't do extra passes to optimize entropy coding */ - cinfo->optimize_coding = FALSE; - /* The standard Huffman tables are only valid for 8-bit data precision. - * If the precision is higher, force optimization on so that usable - * tables will be computed. This test can be removed if default tables - * are supplied that are valid for the desired precision. - */ - if (cinfo->data_precision > 8) - cinfo->optimize_coding = TRUE; - - /* By default, use the simpler non-cosited sampling alignment */ - cinfo->CCIR601_sampling = FALSE; - - /* No input smoothing */ - cinfo->smoothing_factor = 0; - - /* DCT algorithm preference */ - cinfo->dct_method = JDCT_DEFAULT; - - /* No restart markers */ - cinfo->restart_interval = 0; - cinfo->restart_in_rows = 0; - - /* Fill in default JFIF marker parameters. Note that whether the marker - * will actually be written is determined by jpeg_set_colorspace. - * - * By default, the library emits JFIF version code 1.01. - * An application that wants to emit JFIF 1.02 extension markers should set - * JFIF_minor_version to 2. We could probably get away with just defaulting - * to 1.02, but there may still be some decoders in use that will complain - * about that; saying 1.01 should minimize compatibility problems. - */ - cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ - cinfo->JFIF_minor_version = 1; - cinfo->density_unit = 0; /* Pixel size is unknown by default */ - cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ - cinfo->Y_density = 1; - - /* Choose JPEG colorspace based on input space, set defaults accordingly */ - - jpeg_default_colorspace(cinfo); -} - - -/* - * Select an appropriate JPEG colorspace for in_color_space. - */ - -GLOBAL(void) -jpeg_default_colorspace (j_compress_ptr cinfo) -{ - switch (cinfo->in_color_space) { - case JCS_GRAYSCALE: - jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); - break; - case JCS_RGB: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_YCbCr: - jpeg_set_colorspace(cinfo, JCS_YCbCr); - break; - case JCS_CMYK: - jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ - break; - case JCS_YCCK: - jpeg_set_colorspace(cinfo, JCS_YCCK); - break; - case JCS_UNKNOWN: - jpeg_set_colorspace(cinfo, JCS_UNKNOWN); - break; - default: - ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); - } -} - - -/* - * Set the JPEG colorspace, and choose colorspace-dependent default values. - */ - -GLOBAL(void) -jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) -{ - jpeg_component_info * compptr; - int ci; - -#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ - (compptr = &cinfo->comp_info[index], \ - compptr->component_id = (id), \ - compptr->h_samp_factor = (hsamp), \ - compptr->v_samp_factor = (vsamp), \ - compptr->quant_tbl_no = (quant), \ - compptr->dc_tbl_no = (dctbl), \ - compptr->ac_tbl_no = (actbl) ) - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* For all colorspaces, we use Q and Huff tables 0 for luminance components, - * tables 1 for chrominance components. - */ - - cinfo->jpeg_color_space = colorspace; - - cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ - cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ - - switch (colorspace) { - case JCS_GRAYSCALE: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 1; - /* JFIF specifies component ID 1 */ - SET_COMP(0, 1, 1,1, 0, 0,0); - break; - case JCS_RGB: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ - cinfo->num_components = 3; - SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); - SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); - SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); - break; - case JCS_YCbCr: - cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ - cinfo->num_components = 3; - /* JFIF specifies component IDs 1,2,3 */ - /* We default to 2x2 subsamples of chrominance */ - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - break; - case JCS_CMYK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ - cinfo->num_components = 4; - SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); - SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); - SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); - SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); - break; - case JCS_YCCK: - cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ - cinfo->num_components = 4; - SET_COMP(0, 1, 2,2, 0, 0,0); - SET_COMP(1, 2, 1,1, 1, 1,1); - SET_COMP(2, 3, 1,1, 1, 1,1); - SET_COMP(3, 4, 2,2, 0, 0,0); - break; - case JCS_UNKNOWN: - cinfo->num_components = cinfo->input_components; - if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - for (ci = 0; ci < cinfo->num_components; ci++) { - SET_COMP(ci, ci, 1,1, 0, 0,0); - } - break; - default: - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - } -} - - -#ifdef C_PROGRESSIVE_SUPPORTED - -LOCAL(jpeg_scan_info *) -fill_a_scan (jpeg_scan_info * scanptr, int ci, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for specified component */ -{ - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - return scanptr; -} - -LOCAL(jpeg_scan_info *) -fill_scans (jpeg_scan_info * scanptr, int ncomps, - int Ss, int Se, int Ah, int Al) -/* Support routine: generate one scan for each component */ -{ - int ci; - - for (ci = 0; ci < ncomps; ci++) { - scanptr->comps_in_scan = 1; - scanptr->component_index[0] = ci; - scanptr->Ss = Ss; - scanptr->Se = Se; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } - return scanptr; -} - -LOCAL(jpeg_scan_info *) -fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) -/* Support routine: generate interleaved DC scan if possible, else N scans */ -{ - int ci; - - if (ncomps <= MAX_COMPS_IN_SCAN) { - /* Single interleaved DC scan */ - scanptr->comps_in_scan = ncomps; - for (ci = 0; ci < ncomps; ci++) - scanptr->component_index[ci] = ci; - scanptr->Ss = scanptr->Se = 0; - scanptr->Ah = Ah; - scanptr->Al = Al; - scanptr++; - } else { - /* Noninterleaved DC scan for each component */ - scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); - } - return scanptr; -} - - -/* - * Create a recommended progressive-JPEG script. - * cinfo->num_components and cinfo->jpeg_color_space must be correct. - */ - -GLOBAL(void) -jpeg_simple_progression (j_compress_ptr cinfo) -{ - int ncomps = cinfo->num_components; - int nscans; - jpeg_scan_info * scanptr; - - /* Safety check to ensure start_compress not called yet. */ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - /* Figure space needed for script. Calculation must match code below! */ - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - nscans = 10; - } else { - /* All-purpose script for other color spaces. */ - if (ncomps > MAX_COMPS_IN_SCAN) - nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ - else - nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ - } - - /* Allocate space for script. - * We need to put it in the permanent pool in case the application performs - * multiple compressions without changing the settings. To avoid a memory - * leak if jpeg_simple_progression is called repeatedly for the same JPEG - * object, we try to re-use previously allocated space, and we allocate - * enough space to handle YCbCr even if initially asked for grayscale. - */ - if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { - cinfo->script_space_size = MAX(nscans, 10); - cinfo->script_space = (jpeg_scan_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - cinfo->script_space_size * SIZEOF(jpeg_scan_info)); - } - scanptr = cinfo->script_space; - cinfo->scan_info = scanptr; - cinfo->num_scans = nscans; - - if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { - /* Custom script for YCbCr color images. */ - /* Initial DC scan */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - /* Initial AC scan: get some luma data out in a hurry */ - scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); - /* Chroma data is too small to be worth expending many scans on */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); - /* Complete spectral selection for luma AC */ - scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); - /* Refine next bit of luma AC */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); - /* Finish DC successive approximation */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - /* Finish AC successive approximation */ - scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); - scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); - /* Luma bottom bit comes last since it's usually largest scan */ - scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); - } else { - /* All-purpose script for other color spaces. */ - /* Successive approximation first pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); - scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); - scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); - /* Successive approximation second pass */ - scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); - /* Successive approximation final pass */ - scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); - scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); - } -#ifdef NEEDS_ARM_ERRATA_754319_754320 - asm volatile ( "vmov s0,s0\n" ); -#endif - -} - -#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/libjpegtwrp/jcphuff.c b/libjpegtwrp/jcphuff.c deleted file mode 100644 index 07f9178b0..000000000 --- a/libjpegtwrp/jcphuff.c +++ /dev/null @@ -1,833 +0,0 @@ -/* - * jcphuff.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy encoding routines for progressive JPEG. - * - * We do not support output suspension in this module, since the library - * currently does not allow multiple-scan files to be written with output - * suspension. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jchuff.h" /* Declarations shared with jchuff.c */ - -#ifdef C_PROGRESSIVE_SUPPORTED - -/* Expanded entropy encoder object for progressive Huffman encoding. */ - -typedef struct { - struct jpeg_entropy_encoder pub; /* public fields */ - - /* Mode flag: TRUE for optimization, FALSE for actual data output */ - boolean gather_statistics; - - /* Bit-level coding status. - * next_output_byte/free_in_buffer are local copies of cinfo->dest fields. - */ - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - INT32 put_buffer; /* current bit-accumulation buffer */ - int put_bits; /* # of bits now in it */ - j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ - - /* Coding status for DC components */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ - - /* Coding status for AC components */ - int ac_tbl_no; /* the table number of the single component */ - unsigned int EOBRUN; /* run length of EOBs */ - unsigned int BE; /* # of buffered correction bits before MCU */ - char * bit_buffer; /* buffer for correction bits (1 per char) */ - /* packing correction bits tightly would save some space but cost time... */ - - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - int next_restart_num; /* next restart number to write (0-7) */ - - /* Pointers to derived tables (these workspaces have image lifespan). - * Since any one scan codes only DC or only AC, we only need one set - * of tables, not one for DC and one for AC. - */ - c_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - /* Statistics tables for optimization; again, one set is enough */ - long * count_ptrs[NUM_HUFF_TBLS]; -} phuff_entropy_encoder; - -typedef phuff_entropy_encoder * phuff_entropy_ptr; - -/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit - * buffer can hold. Larger sizes may slightly improve compression, but - * 1000 is already well into the realm of overkill. - * The minimum safe size is 64 bits. - */ - -#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ - -/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. - * We assume that int right shift is unsigned if INT32 right shift is, - * which should be safe. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS int ishift_temp; -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -/* Forward declarations */ -METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo)); -METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo)); - - -/* - * Initialize for a Huffman-compressed scan using progressive JPEG. - */ - -METHODDEF(void) -start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - boolean is_DC_band; - int ci, tbl; - jpeg_component_info * compptr; - - entropy->cinfo = cinfo; - entropy->gather_statistics = gather_statistics; - - is_DC_band = (cinfo->Ss == 0); - - /* We assume jcmaster.c already validated the scan parameters. */ - - /* Select execution routines */ - if (cinfo->Ah == 0) { - if (is_DC_band) - entropy->pub.encode_mcu = encode_mcu_DC_first; - else - entropy->pub.encode_mcu = encode_mcu_AC_first; - } else { - if (is_DC_band) - entropy->pub.encode_mcu = encode_mcu_DC_refine; - else { - entropy->pub.encode_mcu = encode_mcu_AC_refine; - /* AC refinement needs a correction bit buffer */ - if (entropy->bit_buffer == NULL) - entropy->bit_buffer = (char *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - MAX_CORR_BITS * SIZEOF(char)); - } - } - if (gather_statistics) - entropy->pub.finish_pass = finish_pass_gather_phuff; - else - entropy->pub.finish_pass = finish_pass_phuff; - - /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1 - * for AC coefficients. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Initialize DC predictions to 0 */ - entropy->last_dc_val[ci] = 0; - /* Get table index */ - if (is_DC_band) { - if (cinfo->Ah != 0) /* DC refinement needs no table */ - continue; - tbl = compptr->dc_tbl_no; - } else { - entropy->ac_tbl_no = tbl = compptr->ac_tbl_no; - } - if (gather_statistics) { - /* Check for invalid table index */ - /* (make_c_derived_tbl does this in the other path) */ - if (tbl < 0 || tbl >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); - /* Allocate and zero the statistics tables */ - /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ - if (entropy->count_ptrs[tbl] == NULL) - entropy->count_ptrs[tbl] = (long *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 257 * SIZEOF(long)); - MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long)); - } else { - /* Compute derived values for Huffman table */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl, - & entropy->derived_tbls[tbl]); - } - } - - /* Initialize AC stuff */ - entropy->EOBRUN = 0; - entropy->BE = 0; - - /* Initialize bit buffer to empty */ - entropy->put_buffer = 0; - entropy->put_bits = 0; - - /* Initialize restart stuff */ - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num = 0; -} - - -/* Outputting bytes to the file. - * NB: these must be called only when actually outputting, - * that is, entropy->gather_statistics == FALSE. - */ - -/* Emit a byte */ -#define emit_byte(entropy,val) \ - { *(entropy)->next_output_byte++ = (JOCTET) (val); \ - if (--(entropy)->free_in_buffer == 0) \ - dump_buffer(entropy); } - - -LOCAL(void) -dump_buffer (phuff_entropy_ptr entropy) -/* Empty the output buffer; we do not support suspension in this module. */ -{ - struct jpeg_destination_mgr * dest = entropy->cinfo->dest; - - if (! (*dest->empty_output_buffer) (entropy->cinfo)) - ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); - /* After a successful buffer dump, must reset buffer pointers */ - entropy->next_output_byte = dest->next_output_byte; - entropy->free_in_buffer = dest->free_in_buffer; -} - - -/* Outputting bits to the file */ - -/* Only the right 24 bits of put_buffer are used; the valid bits are - * left-justified in this part. At most 16 bits can be passed to emit_bits - * in one call, and we never retain more than 7 bits in put_buffer - * between calls, so 24 bits are sufficient. - */ - -INLINE -LOCAL(void) -emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size) -/* Emit some bits, unless we are in gather mode */ -{ - /* This routine is heavily used, so it's worth coding tightly. */ - register INT32 put_buffer = (INT32) code; - register int put_bits = entropy->put_bits; - - /* if size is 0, caller used an invalid Huffman table entry */ - if (size == 0) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - if (entropy->gather_statistics) - return; /* do nothing if we're only getting stats */ - - put_buffer &= (((INT32) 1)<put_buffer; /* and merge with old buffer contents */ - - while (put_bits >= 8) { - int c = (int) ((put_buffer >> 16) & 0xFF); - - emit_byte(entropy, c); - if (c == 0xFF) { /* need to stuff a zero byte? */ - emit_byte(entropy, 0); - } - put_buffer <<= 8; - put_bits -= 8; - } - - entropy->put_buffer = put_buffer; /* update variables */ - entropy->put_bits = put_bits; -} - - -LOCAL(void) -flush_bits (phuff_entropy_ptr entropy) -{ - emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */ - entropy->put_buffer = 0; /* and reset bit-buffer to empty */ - entropy->put_bits = 0; -} - - -/* - * Emit (or just count) a Huffman symbol. - */ - -INLINE -LOCAL(void) -emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol) -{ - if (entropy->gather_statistics) - entropy->count_ptrs[tbl_no][symbol]++; - else { - c_derived_tbl * tbl = entropy->derived_tbls[tbl_no]; - emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); - } -} - - -/* - * Emit bits from a correction bit buffer. - */ - -LOCAL(void) -emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart, - unsigned int nbits) -{ - if (entropy->gather_statistics) - return; /* no real work */ - - while (nbits > 0) { - emit_bits(entropy, (unsigned int) (*bufstart), 1); - bufstart++; - nbits--; - } -} - - -/* - * Emit any pending EOBRUN symbol. - */ - -LOCAL(void) -emit_eobrun (phuff_entropy_ptr entropy) -{ - register int temp, nbits; - - if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ - temp = entropy->EOBRUN; - nbits = 0; - while ((temp >>= 1)) - nbits++; - /* safety check: shouldn't happen given limited correction-bit buffer */ - if (nbits > 14) - ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); - - emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4); - if (nbits) - emit_bits(entropy, entropy->EOBRUN, nbits); - - entropy->EOBRUN = 0; - - /* Emit any buffered correction bits */ - emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); - entropy->BE = 0; - } -} - - -/* - * Emit a restart marker & resynchronize predictions. - */ - -LOCAL(void) -emit_restart (phuff_entropy_ptr entropy, int restart_num) -{ - int ci; - - emit_eobrun(entropy); - - if (! entropy->gather_statistics) { - flush_bits(entropy); - emit_byte(entropy, 0xFF); - emit_byte(entropy, JPEG_RST0 + restart_num); - } - - if (entropy->cinfo->Ss == 0) { - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) - entropy->last_dc_val[ci] = 0; - } else { - /* Re-initialize all AC-related fields to 0 */ - entropy->EOBRUN = 0; - entropy->BE = 0; - } -} - - -/* - * MCU encoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - int blkn, ci; - int Al = cinfo->Al; - JBLOCKROW block; - jpeg_component_info * compptr; - ISHIFT_TEMPS - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - - /* Compute the DC value after the required point transform by Al. - * This is simply an arithmetic right shift. - */ - temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); - - /* DC differences are figured on the point-transformed values. */ - temp = temp2 - entropy->last_dc_val[ci]; - entropy->last_dc_val[ci] = temp2; - - /* Encode the DC coefficient difference per section G.1.2.1 */ - temp2 = temp; - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - /* For a negative input, want temp2 = bitwise complement of abs(input) */ - /* This code assumes we are on a two's complement machine */ - temp2--; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 0; - while (temp) { - nbits++; - temp >>= 1; - } - /* Check for out-of-range coefficient values. - * Since we're encoding a difference, the range limit is twice as much. - */ - if (nbits > MAX_COEF_BITS+1) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count/emit the Huffman-coded symbol for the number of bits */ - emit_symbol(entropy, compptr->dc_tbl_no, nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - if (nbits) /* emit_bits rejects calls with size 0 */ - emit_bits(entropy, (unsigned int) temp2, nbits); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp, temp2; - register int nbits; - register int r, k; - int Se = cinfo->Se; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ - - r = 0; /* r = run length of zeros */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = (*block)[jpeg_natural_order[k]]) == 0) { - r++; - continue; - } - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value; so the code is - * interwoven with finding the abs value (temp) and output bits (temp2). - */ - if (temp < 0) { - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ - temp2 = ~temp; - } else { - temp >>= Al; /* apply the point transform */ - temp2 = temp; - } - /* Watch out for case that nonzero coef is zero after point transform */ - if (temp == 0) { - r++; - continue; - } - - /* Emit any pending EOBRUN */ - if (entropy->EOBRUN > 0) - emit_eobrun(entropy); - /* if run length > 15, must emit special run-length-16 codes (0xF0) */ - while (r > 15) { - emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - } - - /* Find the number of bits needed for the magnitude of the coefficient */ - nbits = 1; /* there must be at least one 1 bit */ - while ((temp >>= 1)) - nbits++; - /* Check for out-of-range coefficient values */ - if (nbits > MAX_COEF_BITS) - ERREXIT(cinfo, JERR_BAD_DCT_COEF); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); - - /* Emit that number of bits of the value, if positive, */ - /* or the complement of its magnitude, if negative. */ - emit_bits(entropy, (unsigned int) temp2, nbits); - - r = 0; /* reset zero run length */ - } - - if (r > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - if (entropy->EOBRUN == 0x7FFF) - emit_eobrun(entropy); /* force it out to avoid overflow */ - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF(boolean) -encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp; - int blkn; - int Al = cinfo->Al; - JBLOCKROW block; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data blocks */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* We simply emit the Al'th bit of the DC coefficient value. */ - temp = (*block)[0]; - emit_bits(entropy, (unsigned int) (temp >> Al), 1); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * MCU encoding for AC successive approximation refinement scan. - */ - -METHODDEF(boolean) -encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - register int temp; - register int r, k; - int EOB; - char *BR_buffer; - unsigned int BR; - int Se = cinfo->Se; - int Al = cinfo->Al; - JBLOCKROW block; - int absvalues[DCTSIZE2]; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Emit restart marker if needed */ - if (cinfo->restart_interval) - if (entropy->restarts_to_go == 0) - emit_restart(entropy, entropy->next_restart_num); - - /* Encode the MCU data block */ - block = MCU_data[0]; - - /* It is convenient to make a pre-pass to determine the transformed - * coefficients' absolute values and the EOB position. - */ - EOB = 0; - for (k = cinfo->Ss; k <= Se; k++) { - temp = (*block)[jpeg_natural_order[k]]; - /* We must apply the point transform by Al. For AC coefficients this - * is an integer division with rounding towards 0. To do this portably - * in C, we shift after obtaining the absolute value. - */ - if (temp < 0) - temp = -temp; /* temp is abs value of input */ - temp >>= Al; /* apply the point transform */ - absvalues[k] = temp; /* save abs value for main pass */ - if (temp == 1) - EOB = k; /* EOB = index of last newly-nonzero coef */ - } - - /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ - - r = 0; /* r = run length of zeros */ - BR = 0; /* BR = count of buffered bits added now */ - BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ - - for (k = cinfo->Ss; k <= Se; k++) { - if ((temp = absvalues[k]) == 0) { - r++; - continue; - } - - /* Emit any required ZRLs, but not if they can be folded into EOB */ - while (r > 15 && k <= EOB) { - /* emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - /* Emit ZRL */ - emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); - r -= 16; - /* Emit buffered correction bits that must be associated with ZRL */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - } - - /* If the coef was previously nonzero, it only needs a correction bit. - * NOTE: a straight translation of the spec's figure G.7 would suggest - * that we also need to test r > 15. But if r > 15, we can only get here - * if k > EOB, which implies that this coefficient is not 1. - */ - if (temp > 1) { - /* The correction bit is the next bit of the absolute value. */ - BR_buffer[BR++] = (char) (temp & 1); - continue; - } - - /* Emit any pending EOBRUN and the BE correction bits */ - emit_eobrun(entropy); - - /* Count/emit Huffman symbol for run length / number of bits */ - emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); - - /* Emit output bit for newly-nonzero coef */ - temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1; - emit_bits(entropy, (unsigned int) temp, 1); - - /* Emit buffered correction bits that must be associated with this code */ - emit_buffered_bits(entropy, BR_buffer, BR); - BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ - BR = 0; - r = 0; /* reset zero run length */ - } - - if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ - entropy->EOBRUN++; /* count an EOB */ - entropy->BE += BR; /* concat my correction bits to older ones */ - /* We force out the EOB if we risk either: - * 1. overflow of the EOB counter; - * 2. overflow of the correction bit buffer during the next MCU. - */ - if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) - emit_eobrun(entropy); - } - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; - - /* Update restart-interval state too */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) { - entropy->restarts_to_go = cinfo->restart_interval; - entropy->next_restart_num++; - entropy->next_restart_num &= 7; - } - entropy->restarts_to_go--; - } - - return TRUE; -} - - -/* - * Finish up at the end of a Huffman-compressed progressive scan. - */ - -METHODDEF(void) -finish_pass_phuff (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - - entropy->next_output_byte = cinfo->dest->next_output_byte; - entropy->free_in_buffer = cinfo->dest->free_in_buffer; - - /* Flush out any buffered data */ - emit_eobrun(entropy); - flush_bits(entropy); - - cinfo->dest->next_output_byte = entropy->next_output_byte; - cinfo->dest->free_in_buffer = entropy->free_in_buffer; -} - - -/* - * Finish up a statistics-gathering pass and create the new Huffman tables. - */ - -METHODDEF(void) -finish_pass_gather_phuff (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - boolean is_DC_band; - int ci, tbl; - jpeg_component_info * compptr; - JHUFF_TBL **htblptr; - boolean did[NUM_HUFF_TBLS]; - - /* Flush out buffered data (all we care about is counting the EOB symbol) */ - emit_eobrun(entropy); - - is_DC_band = (cinfo->Ss == 0); - - /* It's important not to apply jpeg_gen_optimal_table more than once - * per table, because it clobbers the input frequency counts! - */ - MEMZERO(did, SIZEOF(did)); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - if (is_DC_band) { - if (cinfo->Ah != 0) /* DC refinement needs no table */ - continue; - tbl = compptr->dc_tbl_no; - } else { - tbl = compptr->ac_tbl_no; - } - if (! did[tbl]) { - if (is_DC_band) - htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; - else - htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]); - did[tbl] = TRUE; - } - } -} - - -/* - * Module initialization routine for progressive Huffman entropy encoding. - */ - -GLOBAL(void) -jinit_phuff_encoder (j_compress_ptr cinfo) -{ - phuff_entropy_ptr entropy; - int i; - - entropy = (phuff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(phuff_entropy_encoder)); - cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; - entropy->pub.start_pass = start_pass_phuff; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - entropy->count_ptrs[i] = NULL; - } - entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ -} - -#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/libjpegtwrp/jcprepct.c b/libjpegtwrp/jcprepct.c deleted file mode 100644 index fa93333db..000000000 --- a/libjpegtwrp/jcprepct.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * jcprepct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the compression preprocessing controller. - * This controller manages the color conversion, downsampling, - * and edge expansion steps. - * - * Most of the complexity here is associated with buffering input rows - * as required by the downsampler. See the comments at the head of - * jcsample.c for the downsampler's needs. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* At present, jcsample.c can request context rows only for smoothing. - * In the future, we might also need context rows for CCIR601 sampling - * or other more-complex downsampling procedures. The code to support - * context rows should be compiled only if needed. - */ -#ifdef INPUT_SMOOTHING_SUPPORTED -#define CONTEXT_ROWS_SUPPORTED -#endif - - -/* - * For the simple (no-context-row) case, we just need to buffer one - * row group's worth of pixels for the downsampling step. At the bottom of - * the image, we pad to a full row group by replicating the last pixel row. - * The downsampler's last output row is then replicated if needed to pad - * out to a full iMCU row. - * - * When providing context rows, we must buffer three row groups' worth of - * pixels. Three row groups are physically allocated, but the row pointer - * arrays are made five row groups high, with the extra pointers above and - * below "wrapping around" to point to the last and first real row groups. - * This allows the downsampler to access the proper context rows. - * At the top and bottom of the image, we create dummy context rows by - * copying the first or last real pixel row. This copying could be avoided - * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the - * trouble on the compression side. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_prep_controller pub; /* public fields */ - - /* Downsampling input buffer. This buffer holds color-converted data - * until we have enough to do a downsample step. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - JDIMENSION rows_to_go; /* counts rows remaining in source image */ - int next_buf_row; /* index of next row to store in color_buf */ - -#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ - int this_row_group; /* starting row index of group to process */ - int next_buf_stop; /* downsample when we reach this index */ -#endif -} my_prep_controller; - -typedef my_prep_controller * my_prep_ptr; - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - - if (pass_mode != JBUF_PASS_THRU) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Initialize total-height counter for detecting bottom of image */ - prep->rows_to_go = cinfo->image_height; - /* Mark the conversion buffer empty */ - prep->next_buf_row = 0; -#ifdef CONTEXT_ROWS_SUPPORTED - /* Preset additional state variables for context mode. - * These aren't used in non-context mode, so we needn't test which mode. - */ - prep->this_row_group = 0; - /* Set next_buf_stop to stop after two row groups have been read in. */ - prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; -#endif -} - - -/* - * Expand an image vertically from height input_rows to height output_rows, - * by duplicating the bottom row. - */ - -LOCAL(void) -expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, - int input_rows, int output_rows) -{ - register int row; - - for (row = input_rows; row < output_rows; row++) { - jcopy_sample_rows(image_data, input_rows-1, image_data, row, - 1, num_cols); - } -} - - -/* - * Process some data in the simple no-context case. - * - * Preprocessor output data is counted in "row groups". A row group - * is defined to be v_samp_factor sample rows of each component. - * Downsampling will produce this much data from each max_v_samp_factor - * input rows. - */ - -METHODDEF(void) -pre_process_data (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int numrows, ci; - JDIMENSION inrows; - jpeg_component_info * compptr; - - while (*in_row_ctr < in_rows_avail && - *out_row_group_ctr < out_row_groups_avail) { - /* Do color conversion to fill the conversion buffer. */ - inrows = in_rows_avail - *in_row_ctr; - numrows = cinfo->max_v_samp_factor - prep->next_buf_row; - numrows = (int) MIN((JDIMENSION) numrows, inrows); - (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, - prep->color_buf, - (JDIMENSION) prep->next_buf_row, - numrows); - *in_row_ctr += numrows; - prep->next_buf_row += numrows; - prep->rows_to_go -= numrows; - /* If at bottom of image, pad to fill the conversion buffer. */ - if (prep->rows_to_go == 0 && - prep->next_buf_row < cinfo->max_v_samp_factor) { - for (ci = 0; ci < cinfo->num_components; ci++) { - expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, - prep->next_buf_row, cinfo->max_v_samp_factor); - } - prep->next_buf_row = cinfo->max_v_samp_factor; - } - /* If we've filled the conversion buffer, empty it. */ - if (prep->next_buf_row == cinfo->max_v_samp_factor) { - (*cinfo->downsample->downsample) (cinfo, - prep->color_buf, (JDIMENSION) 0, - output_buf, *out_row_group_ctr); - prep->next_buf_row = 0; - (*out_row_group_ctr)++; - } - /* If at bottom of image, pad the output to a full iMCU height. - * Note we assume the caller is providing a one-iMCU-height output buffer! - */ - if (prep->rows_to_go == 0 && - *out_row_group_ctr < out_row_groups_avail) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - expand_bottom_edge(output_buf[ci], - compptr->width_in_blocks * DCTSIZE, - (int) (*out_row_group_ctr * compptr->v_samp_factor), - (int) (out_row_groups_avail * compptr->v_samp_factor)); - } - *out_row_group_ctr = out_row_groups_avail; - break; /* can exit outer loop without test */ - } - } -} - - -#ifdef CONTEXT_ROWS_SUPPORTED - -/* - * Process some data in the context case. - */ - -METHODDEF(void) -pre_process_context (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int numrows, ci; - int buf_height = cinfo->max_v_samp_factor * 3; - JDIMENSION inrows; - - while (*out_row_group_ctr < out_row_groups_avail) { - if (*in_row_ctr < in_rows_avail) { - /* Do color conversion to fill the conversion buffer. */ - inrows = in_rows_avail - *in_row_ctr; - numrows = prep->next_buf_stop - prep->next_buf_row; - numrows = (int) MIN((JDIMENSION) numrows, inrows); - (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, - prep->color_buf, - (JDIMENSION) prep->next_buf_row, - numrows); - /* Pad at top of image, if first time through */ - if (prep->rows_to_go == cinfo->image_height) { - for (ci = 0; ci < cinfo->num_components; ci++) { - int row; - for (row = 1; row <= cinfo->max_v_samp_factor; row++) { - jcopy_sample_rows(prep->color_buf[ci], 0, - prep->color_buf[ci], -row, - 1, cinfo->image_width); - } - } - } - *in_row_ctr += numrows; - prep->next_buf_row += numrows; - prep->rows_to_go -= numrows; - } else { - /* Return for more data, unless we are at the bottom of the image. */ - if (prep->rows_to_go != 0) - break; - /* When at bottom of image, pad to fill the conversion buffer. */ - if (prep->next_buf_row < prep->next_buf_stop) { - for (ci = 0; ci < cinfo->num_components; ci++) { - expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, - prep->next_buf_row, prep->next_buf_stop); - } - prep->next_buf_row = prep->next_buf_stop; - } - } - /* If we've gotten enough data, downsample a row group. */ - if (prep->next_buf_row == prep->next_buf_stop) { - (*cinfo->downsample->downsample) (cinfo, - prep->color_buf, - (JDIMENSION) prep->this_row_group, - output_buf, *out_row_group_ctr); - (*out_row_group_ctr)++; - /* Advance pointers with wraparound as necessary. */ - prep->this_row_group += cinfo->max_v_samp_factor; - if (prep->this_row_group >= buf_height) - prep->this_row_group = 0; - if (prep->next_buf_row >= buf_height) - prep->next_buf_row = 0; - prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; - } - } -} - - -/* - * Create the wrapped-around downsampling input buffer needed for context mode. - */ - -LOCAL(void) -create_context_buffer (j_compress_ptr cinfo) -{ - my_prep_ptr prep = (my_prep_ptr) cinfo->prep; - int rgroup_height = cinfo->max_v_samp_factor; - int ci, i; - jpeg_component_info * compptr; - JSAMPARRAY true_buffer, fake_buffer; - - /* Grab enough space for fake row pointers for all the components; - * we need five row groups' worth of pointers for each component. - */ - fake_buffer = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (cinfo->num_components * 5 * rgroup_height) * - SIZEOF(JSAMPROW)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate the actual buffer space (3 row groups) for this component. - * We make the buffer wide enough to allow the downsampler to edge-expand - * horizontally within the buffer, if it so chooses. - */ - true_buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * - cinfo->max_h_samp_factor) / compptr->h_samp_factor), - (JDIMENSION) (3 * rgroup_height)); - /* Copy true buffer row pointers into the middle of the fake row array */ - MEMCOPY(fake_buffer + rgroup_height, true_buffer, - 3 * rgroup_height * SIZEOF(JSAMPROW)); - /* Fill in the above and below wraparound pointers */ - for (i = 0; i < rgroup_height; i++) { - fake_buffer[i] = true_buffer[2 * rgroup_height + i]; - fake_buffer[4 * rgroup_height + i] = true_buffer[i]; - } - prep->color_buf[ci] = fake_buffer + rgroup_height; - fake_buffer += 5 * rgroup_height; /* point to space for next component */ - } -} - -#endif /* CONTEXT_ROWS_SUPPORTED */ - - -/* - * Initialize preprocessing controller. - */ - -GLOBAL(void) -jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) -{ - my_prep_ptr prep; - int ci; - jpeg_component_info * compptr; - - if (need_full_buffer) /* safety check */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - prep = (my_prep_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_prep_controller)); - cinfo->prep = (struct jpeg_c_prep_controller *) prep; - prep->pub.start_pass = start_pass_prep; - - /* Allocate the color conversion buffer. - * We make the buffer wide enough to allow the downsampler to edge-expand - * horizontally within the buffer, if it so chooses. - */ - if (cinfo->downsample->need_context_rows) { - /* Set up to provide context rows */ -#ifdef CONTEXT_ROWS_SUPPORTED - prep->pub.pre_process_data = pre_process_context; - create_context_buffer(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* No context, just make it tall enough for one row group */ - prep->pub.pre_process_data = pre_process_data; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * - cinfo->max_h_samp_factor) / compptr->h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} diff --git a/libjpegtwrp/jcsample.c b/libjpegtwrp/jcsample.c deleted file mode 100644 index 212ec8757..000000000 --- a/libjpegtwrp/jcsample.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * jcsample.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains downsampling routines. - * - * Downsampling input data is counted in "row groups". A row group - * is defined to be max_v_samp_factor pixel rows of each component, - * from which the downsampler produces v_samp_factor sample rows. - * A single row group is processed in each call to the downsampler module. - * - * The downsampler is responsible for edge-expansion of its output data - * to fill an integral number of DCT blocks horizontally. The source buffer - * may be modified if it is helpful for this purpose (the source buffer is - * allocated wide enough to correspond to the desired output width). - * The caller (the prep controller) is responsible for vertical padding. - * - * The downsampler may request "context rows" by setting need_context_rows - * during startup. In this case, the input arrays will contain at least - * one row group's worth of pixels above and below the passed-in data; - * the caller will create dummy rows at image top and bottom by replicating - * the first or last real pixel row. - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - * - * The downsampling algorithm used here is a simple average of the source - * pixels covered by the output pixel. The hi-falutin sampling literature - * refers to this as a "box filter". In general the characteristics of a box - * filter are not very good, but for the specific cases we normally use (1:1 - * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not - * nearly so bad. If you intend to use other sampling ratios, you'd be well - * advised to improve this code. - * - * A simple input-smoothing capability is provided. This is mainly intended - * for cleaning up color-dithered GIF input files (if you find it inadequate, - * we suggest using an external filtering program such as pnmconvol). When - * enabled, each input pixel P is replaced by a weighted sum of itself and its - * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, - * where SF = (smoothing_factor / 1024). - * Currently, smoothing is only supported for 2h2v sampling factors. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to downsample a single component */ -typedef JMETHOD(void, downsample1_ptr, - (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data)); - -/* Private subobject */ - -typedef struct { - struct jpeg_downsampler pub; /* public fields */ - - /* Downsampling method pointers, one per component */ - downsample1_ptr methods[MAX_COMPONENTS]; -} my_downsampler; - -typedef my_downsampler * my_downsample_ptr; - - -/* - * Initialize for a downsampling pass. - */ - -METHODDEF(void) -start_pass_downsample (j_compress_ptr cinfo) -{ - /* no work for now */ -} - - -/* - * Expand a component horizontally from width input_cols to width output_cols, - * by duplicating the rightmost samples. - */ - -LOCAL(void) -expand_right_edge (JSAMPARRAY image_data, int num_rows, - JDIMENSION input_cols, JDIMENSION output_cols) -{ - register JSAMPROW ptr; - register JSAMPLE pixval; - register int count; - int row; - int numcols = (int) (output_cols - input_cols); - - if (numcols > 0) { - for (row = 0; row < num_rows; row++) { - ptr = image_data[row] + input_cols; - pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ - for (count = numcols; count > 0; count--) - *ptr++ = pixval; - } - } -} - - -/* - * Do downsampling for a whole row group (all components). - * - * In this version we simply downsample each component independently. - */ - -METHODDEF(void) -sep_downsample (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) -{ - my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; - int ci; - jpeg_component_info * compptr; - JSAMPARRAY in_ptr, out_ptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - in_ptr = input_buf[ci] + in_row_index; - out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor); - (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); - } -} - - -/* - * Downsample pixel values of a single component. - * One row group is processed per call. - * This version handles arbitrary integral sampling ratios, without smoothing. - * Note that this version is not actually used for customary sampling ratios. - */ - -METHODDEF(void) -int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; - JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - JSAMPROW inptr, outptr; - INT32 outvalue; - - h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor; - v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor; - numpix = h_expand * v_expand; - numpix2 = numpix/2; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * h_expand); - - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - for (outcol = 0, outcol_h = 0; outcol < output_cols; - outcol++, outcol_h += h_expand) { - outvalue = 0; - for (v = 0; v < v_expand; v++) { - inptr = input_data[inrow+v] + outcol_h; - for (h = 0; h < h_expand; h++) { - outvalue += (INT32) GETJSAMPLE(*inptr++); - } - } - *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); - } - inrow += v_expand; - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the special case of a full-size component, - * without smoothing. - */ - -METHODDEF(void) -fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - /* Copy the data */ - jcopy_sample_rows(input_data, 0, output_data, 0, - cinfo->max_v_samp_factor, cinfo->image_width); - /* Edge-expand */ - expand_right_edge(output_data, cinfo->max_v_samp_factor, - cinfo->image_width, compptr->width_in_blocks * DCTSIZE); -} - - -/* - * Downsample pixel values of a single component. - * This version handles the common case of 2:1 horizontal and 1:1 vertical, - * without smoothing. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF(void) -h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int outrow; - JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr, outptr; - register int bias; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * 2); - - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr = input_data[outrow]; - bias = 0; /* bias = 0,1,0,1,... for successive samples */ - for (outcol = 0; outcol < output_cols; outcol++) { - *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) - + bias) >> 1); - bias ^= 1; /* 0=>1, 1=>0 */ - inptr += 2; - } - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the standard case of 2:1 horizontal and 2:1 vertical, - * without smoothing. - */ - -METHODDEF(void) -h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow; - JDIMENSION outcol; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr0, inptr1, outptr; - register int bias; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data, cinfo->max_v_samp_factor, - cinfo->image_width, output_cols * 2); - - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr0 = input_data[inrow]; - inptr1 = input_data[inrow+1]; - bias = 1; /* bias = 1,2,1,2,... for successive samples */ - for (outcol = 0; outcol < output_cols; outcol++) { - *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) - + bias) >> 2); - bias ^= 3; /* 1=>2, 2=>1 */ - inptr0 += 2; inptr1 += 2; - } - inrow += 2; - } -} - - -#ifdef INPUT_SMOOTHING_SUPPORTED - -/* - * Downsample pixel values of a single component. - * This version handles the standard case of 2:1 horizontal and 2:1 vertical, - * with smoothing. One row of context is required. - */ - -METHODDEF(void) -h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int inrow, outrow; - JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; - INT32 membersum, neighsum, memberscale, neighscale; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, - cinfo->image_width, output_cols * 2); - - /* We don't bother to form the individual "smoothed" input pixel values; - * we can directly compute the output which is the average of the four - * smoothed values. Each of the four member pixels contributes a fraction - * (1-8*SF) to its own smoothed image and a fraction SF to each of the three - * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final - * output. The four corner-adjacent neighbor pixels contribute a fraction - * SF to just one smoothed pixel, or SF/4 to the final output; while the - * eight edge-adjacent neighbors contribute SF to each of two smoothed - * pixels, or SF/2 overall. In order to use integer arithmetic, these - * factors are scaled by 2^16 = 65536. - * Also recall that SF = smoothing_factor / 1024. - */ - - memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ - neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ - - inrow = 0; - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr0 = input_data[inrow]; - inptr1 = input_data[inrow+1]; - above_ptr = input_data[inrow-1]; - below_ptr = input_data[inrow+2]; - - /* Special case for first column: pretend column -1 is same as column 0 */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); - neighsum += neighsum; - neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; - - for (colctr = output_cols - 2; colctr > 0; colctr--) { - /* sum of pixels directly mapped to this output element */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - /* sum of edge-neighbor pixels */ - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + - GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); - /* The edge-neighbors count twice as much as corner-neighbors */ - neighsum += neighsum; - /* Add in the corner-neighbors */ - neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + - GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); - /* form final output scaled up by 2^16 */ - membersum = membersum * memberscale + neighsum * neighscale; - /* round, descale and output it */ - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; - } - - /* Special case for last column */ - membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); - neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + - GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + - GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); - neighsum += neighsum; - neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + - GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); - membersum = membersum * memberscale + neighsum * neighscale; - *outptr = (JSAMPLE) ((membersum + 32768) >> 16); - - inrow += 2; - } -} - - -/* - * Downsample pixel values of a single component. - * This version handles the special case of a full-size component, - * with smoothing. One row of context is required. - */ - -METHODDEF(void) -fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, - JSAMPARRAY input_data, JSAMPARRAY output_data) -{ - int outrow; - JDIMENSION colctr; - JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; - register JSAMPROW inptr, above_ptr, below_ptr, outptr; - INT32 membersum, neighsum, memberscale, neighscale; - int colsum, lastcolsum, nextcolsum; - - /* Expand input data enough to let all the output samples be generated - * by the standard loop. Special-casing padded output would be more - * efficient. - */ - expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, - cinfo->image_width, output_cols); - - /* Each of the eight neighbor pixels contributes a fraction SF to the - * smoothed pixel, while the main pixel contributes (1-8*SF). In order - * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. - * Also recall that SF = smoothing_factor / 1024. - */ - - memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ - neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ - - for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { - outptr = output_data[outrow]; - inptr = input_data[outrow]; - above_ptr = input_data[outrow-1]; - below_ptr = input_data[outrow+1]; - - /* Special case for first column */ - colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + - GETJSAMPLE(*inptr); - membersum = GETJSAMPLE(*inptr++); - nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + - GETJSAMPLE(*inptr); - neighsum = colsum + (colsum - membersum) + nextcolsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - lastcolsum = colsum; colsum = nextcolsum; - - for (colctr = output_cols - 2; colctr > 0; colctr--) { - membersum = GETJSAMPLE(*inptr++); - above_ptr++; below_ptr++; - nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + - GETJSAMPLE(*inptr); - neighsum = lastcolsum + (colsum - membersum) + nextcolsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); - lastcolsum = colsum; colsum = nextcolsum; - } - - /* Special case for last column */ - membersum = GETJSAMPLE(*inptr); - neighsum = lastcolsum + (colsum - membersum) + colsum; - membersum = membersum * memberscale + neighsum * neighscale; - *outptr = (JSAMPLE) ((membersum + 32768) >> 16); - - } -} - -#endif /* INPUT_SMOOTHING_SUPPORTED */ - - -/* - * Module initialization routine for downsampling. - * Note that we must select a routine for each component. - */ - -GLOBAL(void) -jinit_downsampler (j_compress_ptr cinfo) -{ - my_downsample_ptr downsample; - int ci; - jpeg_component_info * compptr; - boolean smoothok = TRUE; - - downsample = (my_downsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_downsampler)); - cinfo->downsample = (struct jpeg_downsampler *) downsample; - downsample->pub.start_pass = start_pass_downsample; - downsample->pub.downsample = sep_downsample; - downsample->pub.need_context_rows = FALSE; - - if (cinfo->CCIR601_sampling) - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* Verify we can handle the sampling factors, and set up method pointers */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor == cinfo->max_h_samp_factor && - compptr->v_samp_factor == cinfo->max_v_samp_factor) { -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor) { - downsample->methods[ci] = fullsize_smooth_downsample; - downsample->pub.need_context_rows = TRUE; - } else -#endif - downsample->methods[ci] = fullsize_downsample; - } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && - compptr->v_samp_factor == cinfo->max_v_samp_factor) { - smoothok = FALSE; - downsample->methods[ci] = h2v1_downsample; - } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && - compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) { -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor) { - downsample->methods[ci] = h2v2_smooth_downsample; - downsample->pub.need_context_rows = TRUE; - } else -#endif - downsample->methods[ci] = h2v2_downsample; - } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 && - (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) { - smoothok = FALSE; - downsample->methods[ci] = int_downsample; - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - } - -#ifdef INPUT_SMOOTHING_SUPPORTED - if (cinfo->smoothing_factor && !smoothok) - TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); -#endif -} diff --git a/libjpegtwrp/jctrans.c b/libjpegtwrp/jctrans.c deleted file mode 100644 index f574ed14f..000000000 --- a/libjpegtwrp/jctrans.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * jctrans.c - * - * Copyright (C) 1995-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding compression, - * that is, writing raw DCT coefficient arrays to an output JPEG file. - * The routines in jcapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL(void) transencode_master_selection - JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); -LOCAL(void) transencode_coef_controller - JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); - - -/* - * Compression initialization for writing raw-coefficient data. - * Before calling this, all parameters and a data destination must be set up. - * Call jpeg_finish_compress() to actually write the data. - * - * The number of passed virtual arrays must match cinfo->num_components. - * Note that the virtual arrays need not be filled or even realized at - * the time write_coefficients is called; indeed, if the virtual arrays - * were requested from this compression object's memory manager, they - * typically will be realized during this routine and filled afterwards. - */ - -GLOBAL(void) -jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) -{ - if (cinfo->global_state != CSTATE_START) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Mark all tables to be written */ - jpeg_suppress_tables(cinfo, FALSE); - /* (Re)initialize error mgr and destination modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->dest->init_destination) (cinfo); - /* Perform master selection of active modules */ - transencode_master_selection(cinfo, coef_arrays); - /* Wait for jpeg_finish_compress() call */ - cinfo->next_scanline = 0; /* so jpeg_write_marker works */ - cinfo->global_state = CSTATE_WRCOEFS; -} - - -/* - * Initialize the compression object with default parameters, - * then copy from the source object all parameters needed for lossless - * transcoding. Parameters that can be varied without loss (such as - * scan script and Huffman optimization) are left in their default states. - */ - -GLOBAL(void) -jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo) -{ - JQUANT_TBL ** qtblptr; - jpeg_component_info *incomp, *outcomp; - JQUANT_TBL *c_quant, *slot_quant; - int tblno, ci, coefi; - - /* Safety check to ensure start_compress not called yet. */ - if (dstinfo->global_state != CSTATE_START) - ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); - /* Copy fundamental image dimensions */ - dstinfo->image_width = srcinfo->image_width; - dstinfo->image_height = srcinfo->image_height; - dstinfo->input_components = srcinfo->num_components; - dstinfo->in_color_space = srcinfo->jpeg_color_space; - /* Initialize all parameters to default values */ - jpeg_set_defaults(dstinfo); - /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. - * Fix it to get the right header markers for the image colorspace. - */ - jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); - dstinfo->data_precision = srcinfo->data_precision; - dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; - /* Copy the source's quantization tables. */ - for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { - if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { - qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; - if (*qtblptr == NULL) - *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); - MEMCOPY((*qtblptr)->quantval, - srcinfo->quant_tbl_ptrs[tblno]->quantval, - SIZEOF((*qtblptr)->quantval)); - (*qtblptr)->sent_table = FALSE; - } - } - /* Copy the source's per-component info. - * Note we assume jpeg_set_defaults has allocated the dest comp_info array. - */ - dstinfo->num_components = srcinfo->num_components; - if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) - ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, - MAX_COMPONENTS); - for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; - ci < dstinfo->num_components; ci++, incomp++, outcomp++) { - outcomp->component_id = incomp->component_id; - outcomp->h_samp_factor = incomp->h_samp_factor; - outcomp->v_samp_factor = incomp->v_samp_factor; - outcomp->quant_tbl_no = incomp->quant_tbl_no; - /* Make sure saved quantization table for component matches the qtable - * slot. If not, the input file re-used this qtable slot. - * IJG encoder currently cannot duplicate this. - */ - tblno = outcomp->quant_tbl_no; - if (tblno < 0 || tblno >= NUM_QUANT_TBLS || - srcinfo->quant_tbl_ptrs[tblno] == NULL) - ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); - slot_quant = srcinfo->quant_tbl_ptrs[tblno]; - c_quant = incomp->quant_table; - if (c_quant != NULL) { - for (coefi = 0; coefi < DCTSIZE2; coefi++) { - if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) - ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); - } - } - /* Note: we do not copy the source's Huffman table assignments; - * instead we rely on jpeg_set_colorspace to have made a suitable choice. - */ - } - /* Also copy JFIF version and resolution information, if available. - * Strictly speaking this isn't "critical" info, but it's nearly - * always appropriate to copy it if available. In particular, - * if the application chooses to copy JFIF 1.02 extension markers from - * the source file, we need to copy the version to make sure we don't - * emit a file that has 1.02 extensions but a claimed version of 1.01. - * We will *not*, however, copy version info from mislabeled "2.01" files. - */ - if (srcinfo->saw_JFIF_marker) { - if (srcinfo->JFIF_major_version == 1) { - dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; - dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; - } - dstinfo->density_unit = srcinfo->density_unit; - dstinfo->X_density = srcinfo->X_density; - dstinfo->Y_density = srcinfo->Y_density; - } -} - - -/* - * Master selection of compression modules for transcoding. - * This substitutes for jcinit.c's initialization of the full compressor. - */ - -LOCAL(void) -transencode_master_selection (j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays) -{ - /* Although we don't actually use input_components for transcoding, - * jcmaster.c's initial_setup will complain if input_components is 0. - */ - cinfo->input_components = 1; - /* Initialize master control (includes parameter checking/processing) */ - jinit_c_master_control(cinfo, TRUE /* transcode only */); - - /* Entropy encoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - jinit_phuff_encoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_encoder(cinfo); - } - - /* We need a special coefficient buffer controller. */ - transencode_coef_controller(cinfo, coef_arrays); - - jinit_marker_writer(cinfo); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Write the datastream header (SOI, JFIF) immediately. - * Frame and scan headers are postponed till later. - * This lets application insert special markers after the SOI. - */ - (*cinfo->marker->write_file_header) (cinfo); -} - - -/* - * The rest of this file is a special implementation of the coefficient - * buffer controller. This is similar to jccoefct.c, but it handles only - * output from presupplied virtual arrays. Furthermore, we generate any - * dummy padding blocks on-the-fly rather than expecting them to be present - * in the arrays. - */ - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_c_coef_controller pub; /* public fields */ - - JDIMENSION iMCU_row_num; /* iMCU row # within image */ - JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* Virtual block array for each component. */ - jvirt_barray_ptr * whole_image; - - /* Workspace for constructing dummy blocks at right/bottom edges. */ - JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - - -LOCAL(void) -start_iMCU_row (j_compress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->mcu_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - if (pass_mode != JBUF_CRANK_DEST) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - coef->iMCU_row_num = 0; - start_iMCU_row(cinfo); -} - - -/* - * Process some data. - * We process the equivalent of one fully interleaved MCU row ("iMCU" row) - * per call, ie, v_samp_factor block rows for each component in the scan. - * The data is obtained from the virtual arrays and fed to the entropy coder. - * Returns TRUE if the iMCU row is completed, FALSE if suspended. - * - * NB: input_buf is ignored; it is likely to be a NULL pointer. - */ - -METHODDEF(boolean) -compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, blockcnt; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - coef->iMCU_row_num * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (coef->iMCU_row_num < last_iMCU_row || - yindex+yoffset < compptr->last_row_height) { - /* Fill in pointers to real blocks in this row */ - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < blockcnt; xindex++) - MCU_buffer[blkn++] = buffer_ptr++; - } else { - /* At bottom of image, need a whole row of dummy blocks */ - xindex = 0; - } - /* Fill in any dummy blocks needed in this row. - * Dummy blocks are filled in the same way as in jccoefct.c: - * all zeroes in the AC entries, DC entries equal to previous - * block's DC value. The init routine has already zeroed the - * AC entries, so we need only set the DC entries correctly. - */ - for (; xindex < compptr->MCU_width; xindex++) { - MCU_buffer[blkn] = coef->dummy_buffer[blkn]; - MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; - blkn++; - } - } - } - /* Try to write the MCU. */ - if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->mcu_ctr = MCU_col_num; -#ifdef NEEDS_ARM_ERRATA_754319_754320 - asm volatile ( "vmov s0,s0\n" ); -#endif - return FALSE; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->mcu_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - coef->iMCU_row_num++; - start_iMCU_row(cinfo); -#ifdef NEEDS_ARM_ERRATA_754319_754320 - asm volatile ( "vmov s0,s0\n" ); -#endif - - return TRUE; -} - - -/* - * Initialize coefficient buffer controller. - * - * Each passed coefficient array must be the right size for that - * coefficient: width_in_blocks wide and height_in_blocks high, - * with unitheight at least v_samp_factor. - */ - -LOCAL(void) -transencode_coef_controller (j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays) -{ - my_coef_ptr coef; - JBLOCKROW buffer; - int i; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_c_coef_controller *) coef; - coef->pub.start_pass = start_pass_coef; - coef->pub.compress_data = compress_output; - - /* Save pointer to virtual arrays */ - coef->whole_image = coef_arrays; - - /* Allocate and pre-zero space for dummy DCT blocks. */ - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { - coef->dummy_buffer[i] = buffer + i; - } -} diff --git a/libjpegtwrp/jdapimin.c b/libjpegtwrp/jdapimin.c deleted file mode 100644 index 5c9607ed5..000000000 --- a/libjpegtwrp/jdapimin.c +++ /dev/null @@ -1,401 +0,0 @@ -/* - * jdapimin.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "minimum" API routines that may be - * needed in either the normal full-decompression case or the - * transcoding-only case. - * - * Most of the routines intended to be called directly by an application - * are in this file or in jdapistd.c. But also see jcomapi.c for routines - * shared by compression and decompression, and jdtrans.c for the transcoding - * case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * Initialization of a JPEG decompression object. - * The error manager must already be set up (in case memory manager fails). - */ - -GLOBAL(void) -jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize) -{ - int i; - - /* Guard against version mismatches between library and caller. */ - cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ - if (version != JPEG_LIB_VERSION) - ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); - if (structsize != SIZEOF(struct jpeg_decompress_struct)) - ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, - (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize); - - /* For debugging purposes, we zero the whole master structure. - * But the application has already set the err pointer, and may have set - * client_data, so we have to save and restore those fields. - * Note: if application hasn't set client_data, tools like Purify may - * complain here. - */ - { - struct jpeg_error_mgr * err = cinfo->err; - void * client_data = cinfo->client_data; /* ignore Purify complaint here */ - MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); - cinfo->err = err; - cinfo->client_data = client_data; - } - cinfo->is_decompressor = TRUE; - cinfo->tile_decode = FALSE; - - /* Initialize a memory manager instance for this object */ - jinit_memory_mgr((j_common_ptr) cinfo); - - /* Zero out pointers to permanent structures. */ - cinfo->progress = NULL; - cinfo->src = NULL; - - for (i = 0; i < NUM_QUANT_TBLS; i++) - cinfo->quant_tbl_ptrs[i] = NULL; - - for (i = 0; i < NUM_HUFF_TBLS; i++) { - cinfo->dc_huff_tbl_ptrs[i] = NULL; - cinfo->ac_huff_tbl_ptrs[i] = NULL; - } - - /* Initialize marker processor so application can override methods - * for COM, APPn markers before calling jpeg_read_header. - */ - cinfo->marker_list = NULL; - jinit_marker_reader(cinfo); - - /* And initialize the overall input controller. */ - jinit_input_controller(cinfo); - - /* OK, I'm ready */ - cinfo->global_state = DSTATE_START; -} - - -/* - * Destruction of a JPEG decompression object - */ - -GLOBAL(void) -jpeg_destroy_decompress (j_decompress_ptr cinfo) -{ - jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Abort processing of a JPEG decompression operation, - * but don't destroy the object itself. - */ - -GLOBAL(void) -jpeg_abort_decompress (j_decompress_ptr cinfo) -{ - jpeg_abort((j_common_ptr) cinfo); /* use common routine */ -} - - -/* - * Set default decompression parameters. - */ - -LOCAL(void) -default_decompress_parms (j_decompress_ptr cinfo) -{ - /* Guess the input colorspace, and set output colorspace accordingly. */ - /* (Wish JPEG committee had provided a real way to specify this...) */ - /* Note application may override our guesses. */ - switch (cinfo->num_components) { - case 1: - cinfo->jpeg_color_space = JCS_GRAYSCALE; - cinfo->out_color_space = JCS_GRAYSCALE; - break; - - case 3: - if (cinfo->saw_JFIF_marker) { - cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ - } else if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_RGB; - break; - case 1: - cinfo->jpeg_color_space = JCS_YCbCr; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - break; - } - } else { - /* Saw no special markers, try to guess from the component IDs */ - int cid0 = cinfo->comp_info[0].component_id; - int cid1 = cinfo->comp_info[1].component_id; - int cid2 = cinfo->comp_info[2].component_id; - - if (cid0 == 1 && cid1 == 2 && cid2 == 3) - cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ - else if (cid0 == 82 && cid1 == 71 && cid2 == 66) - cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ - else { - TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); - cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ - } - } - /* Always guess RGB is proper output colorspace. */ - cinfo->out_color_space = JCS_RGB; - break; - - case 4: - if (cinfo->saw_Adobe_marker) { - switch (cinfo->Adobe_transform) { - case 0: - cinfo->jpeg_color_space = JCS_CMYK; - break; - case 2: - cinfo->jpeg_color_space = JCS_YCCK; - break; - default: - WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); - cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ - break; - } - } else { - /* No special markers, assume straight CMYK. */ - cinfo->jpeg_color_space = JCS_CMYK; - } - cinfo->out_color_space = JCS_CMYK; - break; - - default: - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->out_color_space = JCS_UNKNOWN; - break; - } - - /* Set defaults for other decompression parameters. */ - cinfo->scale_num = 1; /* 1:1 scaling */ - cinfo->scale_denom = 1; - cinfo->output_gamma = 1.0; - cinfo->buffered_image = FALSE; - cinfo->raw_data_out = FALSE; - cinfo->dct_method = JDCT_DEFAULT; - cinfo->do_fancy_upsampling = TRUE; - cinfo->do_block_smoothing = TRUE; - cinfo->quantize_colors = FALSE; - /* We set these in case application only sets quantize_colors. */ - cinfo->dither_mode = JDITHER_FS; -#ifdef QUANT_2PASS_SUPPORTED - cinfo->two_pass_quantize = TRUE; -#else - cinfo->two_pass_quantize = FALSE; -#endif - cinfo->desired_number_of_colors = 256; - cinfo->colormap = NULL; - /* Initialize for no mode change in buffered-image mode. */ - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; -} - - -/* - * Decompression startup: read start of JPEG datastream to see what's there. - * Need only initialize JPEG object and supply a data source before calling. - * - * This routine will read as far as the first SOS marker (ie, actual start of - * compressed data), and will save all tables and parameters in the JPEG - * object. It will also initialize the decompression parameters to default - * values, and finally return JPEG_HEADER_OK. On return, the application may - * adjust the decompression parameters and then call jpeg_start_decompress. - * (Or, if the application only wanted to determine the image parameters, - * the data need not be decompressed. In that case, call jpeg_abort or - * jpeg_destroy to release any temporary space.) - * If an abbreviated (tables only) datastream is presented, the routine will - * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then - * re-use the JPEG object to read the abbreviated image datastream(s). - * It is unnecessary (but OK) to call jpeg_abort in this case. - * The JPEG_SUSPENDED return code only occurs if the data source module - * requests suspension of the decompressor. In this case the application - * should load more source data and then re-call jpeg_read_header to resume - * processing. - * If a non-suspending data source is used and require_image is TRUE, then the - * return code need not be inspected since only JPEG_HEADER_OK is possible. - * - * This routine is now just a front end to jpeg_consume_input, with some - * extra error checking. - */ - -GLOBAL(int) -jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) -{ - int retcode; - - if (cinfo->global_state != DSTATE_START && - cinfo->global_state != DSTATE_INHEADER) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - retcode = jpeg_consume_input(cinfo); - - switch (retcode) { - case JPEG_REACHED_SOS: - retcode = JPEG_HEADER_OK; - break; - case JPEG_REACHED_EOI: - if (require_image) /* Complain if application wanted an image */ - ERREXIT(cinfo, JERR_NO_IMAGE); - /* Reset to start state; it would be safer to require the application to - * call jpeg_abort, but we can't change it now for compatibility reasons. - * A side effect is to free any temporary memory (there shouldn't be any). - */ - jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ - retcode = JPEG_HEADER_TABLES_ONLY; - break; - case JPEG_SUSPENDED: - /* no work */ - break; - } - - return retcode; -} - - -/* - * Consume data in advance of what the decompressor requires. - * This can be called at any time once the decompressor object has - * been created and a data source has been set up. - * - * This routine is essentially a state machine that handles a couple - * of critical state-transition actions, namely initial setup and - * transition from header scanning to ready-for-start_decompress. - * All the actual input is done via the input controller's consume_input - * method. - */ - -GLOBAL(int) -jpeg_consume_input (j_decompress_ptr cinfo) -{ - int retcode = JPEG_SUSPENDED; - - /* NB: every possible DSTATE value should be listed in this switch */ - switch (cinfo->global_state) { - case DSTATE_START: - /* Start-of-datastream actions: reset appropriate modules */ - (*cinfo->inputctl->reset_input_controller) (cinfo); - /* Initialize application's data source module */ - (*cinfo->src->init_source) (cinfo); - cinfo->global_state = DSTATE_INHEADER; - /*FALLTHROUGH*/ - case DSTATE_INHEADER: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ - /* Set up default parameters based on header data */ - default_decompress_parms(cinfo); - /* Set global state: ready for start_decompress */ - cinfo->global_state = DSTATE_READY; - } - break; - case DSTATE_READY: - /* Can't advance past first SOS until start_decompress is called */ - retcode = JPEG_REACHED_SOS; - break; - case DSTATE_PRELOAD: - case DSTATE_PRESCAN: - case DSTATE_SCANNING: - case DSTATE_RAW_OK: - case DSTATE_BUFIMAGE: - case DSTATE_BUFPOST: - case DSTATE_STOPPING: - retcode = (*cinfo->inputctl->consume_input) (cinfo); - break; - default: - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - return retcode; -} - - -/* - * Have we finished reading the input file? - */ - -GLOBAL(boolean) -jpeg_input_complete (j_decompress_ptr cinfo) -{ - /* Check for valid jpeg object */ - if (cinfo->global_state < DSTATE_START || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->eoi_reached; -} - - -/* - * Is there more than one scan? - */ - -GLOBAL(boolean) -jpeg_has_multiple_scans (j_decompress_ptr cinfo) -{ - /* Only valid after jpeg_read_header completes */ - if (cinfo->global_state < DSTATE_READY || - cinfo->global_state > DSTATE_STOPPING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return cinfo->inputctl->has_multiple_scans; -} - - -/* - * Finish JPEG decompression. - * - * This will normally just verify the file trailer and release temp storage. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL(boolean) -jpeg_finish_decompress (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { - /* Terminate final pass of non-buffered mode */ -#ifdef ANDROID_TILE_BASED_DECODE - cinfo->output_scanline = cinfo->output_height; -#endif - if (cinfo->output_scanline < cinfo->output_height) - ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state == DSTATE_BUFIMAGE) { - /* Finishing after a buffered-image operation */ - cinfo->global_state = DSTATE_STOPPING; - } else if (cinfo->global_state != DSTATE_STOPPING) { - /* STOPPING = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read until EOI */ -#ifndef ANDROID_TILE_BASED_DECODE - while (! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } -#endif - /* Do final cleanup */ - (*cinfo->src->term_source) (cinfo); - /* We can use jpeg_abort to release memory and reset global_state */ - jpeg_abort((j_common_ptr) cinfo); - return TRUE; -} diff --git a/libjpegtwrp/jdapistd.c b/libjpegtwrp/jdapistd.c deleted file mode 100644 index e1233df36..000000000 --- a/libjpegtwrp/jdapistd.c +++ /dev/null @@ -1,397 +0,0 @@ -/* - * jdapistd.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains application interface code for the decompression half - * of the JPEG library. These are the "standard" API routines that are - * used in the normal full-decompression case. They are not used by a - * transcoding-only application. Note that if an application links in - * jpeg_start_decompress, it will end up linking in the entire decompressor. - * We thus must separate this file from jdapimin.c to avoid linking the - * whole decompression library into a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); - - -/* - * Decompression initialization. - * jpeg_read_header must be completed before calling this. - * - * If a multipass operating mode was selected, this will do all but the - * last pass, and thus may take a great deal of time. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL(boolean) -jpeg_start_decompress (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize master control, select active modules */ - jinit_master_decompress(cinfo); - if (cinfo->buffered_image) { - /* No more work here; expecting jpeg_start_output next */ - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; - } - cinfo->global_state = DSTATE_PRELOAD; - } - if (cinfo->global_state == DSTATE_PRELOAD) { - /* If file has multiple scans, absorb them all into the coef buffer */ - if (cinfo->inputctl->has_multiple_scans) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return FALSE; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* jdmaster underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - } - cinfo->output_scan_number = cinfo->input_scan_number; - } else if (cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any dummy output passes, and set up for the final pass */ - return output_pass_setup(cinfo); -} - -/* - * Tile decompression initialization. - * jpeg_read_header must be completed before calling this. - */ - -GLOBAL(boolean) -jpeg_start_tile_decompress (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize master control, select active modules */ - cinfo->tile_decode = TRUE; - jinit_master_decompress(cinfo); - if (cinfo->buffered_image) { - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; - } - cinfo->global_state = DSTATE_PRELOAD; - } - if (cinfo->global_state == DSTATE_PRELOAD) { - cinfo->output_scan_number = cinfo->input_scan_number; - } else if (cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Perform any dummy output passes, and set up for the final pass */ - return output_pass_setup(cinfo); -} - - -/* - * Set up for an output pass, and perform any dummy pass(es) needed. - * Common subroutine for jpeg_start_decompress and jpeg_start_output. - * Entry: global_state = DSTATE_PRESCAN only if previously suspended. - * Exit: If done, returns TRUE and sets global_state for proper output mode. - * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. - */ - -LOCAL(boolean) -output_pass_setup (j_decompress_ptr cinfo) -{ - if (cinfo->global_state != DSTATE_PRESCAN) { - /* First call: do pass setup */ - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; - cinfo->global_state = DSTATE_PRESCAN; - } - /* Loop over any required dummy passes */ - while (cinfo->master->is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Crank through the dummy pass */ - while (cinfo->output_scanline < cinfo->output_height) { - JDIMENSION last_scanline; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - /* Process some data */ - last_scanline = cinfo->output_scanline; - (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, - &cinfo->output_scanline, (JDIMENSION) 0); - if (cinfo->output_scanline == last_scanline) - return FALSE; /* No progress made, must suspend */ - } - /* Finish up dummy pass, and set up for another one */ - (*cinfo->master->finish_output_pass) (cinfo); - (*cinfo->master->prepare_for_output_pass) (cinfo); - cinfo->output_scanline = 0; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } - /* Ready for application to drive output pass through - * jpeg_read_scanlines or jpeg_read_raw_data. - */ - cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; - return TRUE; -} - - -/* - * Read some scanlines of data from the JPEG decompressor. - * - * The return value will be the number of lines actually read. - * This may be less than the number requested in several cases, - * including bottom of image, data source suspension, and operating - * modes that emit multiple scanlines at a time. - * - * Note: we warn about excess calls to jpeg_read_scanlines() since - * this likely signals an application programmer error. However, - * an oversize buffer (max_lines > scanlines remaining) is not an error. - */ - -GLOBAL(JDIMENSION) -jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, - JDIMENSION max_lines) -{ - JDIMENSION row_ctr; - - if (cinfo->global_state != DSTATE_SCANNING) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Process some data */ - row_ctr = 0; - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); - cinfo->output_scanline += row_ctr; - return row_ctr; -} -/* - * Initialize the jpeg decoder to decompressing a rectangle with size of (width, height) - * and its upper-left corner located at (start_x, start_y). - * Align start_x and start_y to multiplies of iMCU width and height, respectively. - * Also, the new reader position and sampled image size will be returned in - * (start_x, start_y) and (width, height), respectively. - */ - -GLOBAL(void) -jpeg_init_read_tile_scanline(j_decompress_ptr cinfo, huffman_index *index, - int *start_x, int *start_y, int *width, int *height) -{ - // Calculates the boundary of iMCU - int lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; - int lines_per_iMCU_col = cinfo->max_h_samp_factor * DCTSIZE; - int row_offset = *start_y / lines_per_iMCU_row; - int col_left_boundary = ((*start_x / lines_per_iMCU_col) - / index->MCU_sample_size) * index->MCU_sample_size; - int col_right_boundary = - jdiv_round_up(*start_x + *width, lines_per_iMCU_col); - - cinfo->coef->MCU_columns_to_skip = - *start_x / lines_per_iMCU_col - col_left_boundary; - - *height = (*start_y - row_offset * lines_per_iMCU_row) + *height; - *start_x = col_left_boundary * lines_per_iMCU_col; - *start_y = row_offset * lines_per_iMCU_row; - cinfo->image_width = jmin(cinfo->original_image_width, - col_right_boundary * lines_per_iMCU_col) - - col_left_boundary * lines_per_iMCU_col; - cinfo->input_iMCU_row = row_offset; - cinfo->output_iMCU_row = row_offset; - - // Updates JPEG decoder parameter - jinit_color_deconverter(cinfo); - jpeg_calc_output_dimensions(cinfo); - jinit_upsampler(cinfo); - (*cinfo->master->prepare_for_output_pass) (cinfo); - if (cinfo->progressive_mode) - (*cinfo->entropy->start_pass) (cinfo); - else - jpeg_decompress_per_scan_setup(cinfo); - - int sample_size = DCTSIZE / cinfo->min_DCT_scaled_size; - - *height = jdiv_round_up(*height, sample_size); - *width = cinfo->output_width; - cinfo->output_scanline = lines_per_iMCU_row * row_offset / sample_size; - cinfo->inputctl->consume_input = cinfo->coef->consume_data; - cinfo->inputctl->consume_input_build_huffman_index = - cinfo->coef->consume_data_build_huffman_index; - cinfo->entropy->index = index; - cinfo->input_iMCU_row = row_offset; - cinfo->output_iMCU_row = row_offset; - cinfo->coef->MCU_column_left_boundary = col_left_boundary; - cinfo->coef->MCU_column_right_boundary = col_right_boundary; - cinfo->coef->column_left_boundary = - col_left_boundary / index->MCU_sample_size; - cinfo->coef->column_right_boundary = - jdiv_round_up(col_right_boundary, index->MCU_sample_size); -} - -/* - * Read a scanline from the current position. - * - * Return the number of lines actually read. - */ - -GLOBAL(JDIMENSION) -jpeg_read_tile_scanline (j_decompress_ptr cinfo, huffman_index *index, - JSAMPARRAY scanlines) -{ - // Calculates the boundary of iMCU - int lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; - int lines_per_iMCU_col = cinfo->max_h_samp_factor * DCTSIZE; - int sample_size = DCTSIZE / cinfo->min_DCT_scaled_size; - JDIMENSION row_ctr = 0; - - if (cinfo->progressive_mode) { - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, 1); - } else { - if (cinfo->output_scanline % (lines_per_iMCU_row / sample_size) == 0) { - // Set the read head to the next iMCU row - int iMCU_row_offset = cinfo->output_scanline / - (lines_per_iMCU_row / sample_size); - int offset_data_col_position = cinfo->coef->MCU_column_left_boundary / - index->MCU_sample_size; - huffman_offset_data offset_data = - index->scan[0].offset[iMCU_row_offset][offset_data_col_position]; - (*cinfo->entropy->configure_huffman_decoder) (cinfo, offset_data); - } - (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, 1); - } - - cinfo->output_scanline += row_ctr; - return row_ctr; -} - -/* - * Alternate entry point to read raw data. - * Processes exactly one iMCU row per call, unless suspended. - */ - -GLOBAL(JDIMENSION) -jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, - JDIMENSION max_lines) -{ - JDIMENSION lines_per_iMCU_row; - - if (cinfo->global_state != DSTATE_RAW_OK) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - if (cinfo->output_scanline >= cinfo->output_height) { - WARNMS(cinfo, JWRN_TOO_MUCH_DATA); - return 0; - } - - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) { - cinfo->progress->pass_counter = (long) cinfo->output_scanline; - cinfo->progress->pass_limit = (long) cinfo->output_height; - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - } - - /* Verify that at least one iMCU row can be returned. */ - lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size; - if (max_lines < lines_per_iMCU_row) - ERREXIT(cinfo, JERR_BUFFER_SIZE); - - /* Decompress directly into user's buffer. */ - if (! (*cinfo->coef->decompress_data) (cinfo, data)) - return 0; /* suspension forced, can do nothing more */ - - /* OK, we processed one iMCU row. */ - cinfo->output_scanline += lines_per_iMCU_row; - return lines_per_iMCU_row; -} - - -/* Additional entry points for buffered-image mode. */ - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Initialize for an output pass in buffered-image mode. - */ - -GLOBAL(boolean) -jpeg_start_output (j_decompress_ptr cinfo, int scan_number) -{ - if (cinfo->global_state != DSTATE_BUFIMAGE && - cinfo->global_state != DSTATE_PRESCAN) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - /* Limit scan number to valid range */ - if (scan_number <= 0) - scan_number = 1; - if (cinfo->inputctl->eoi_reached && - scan_number > cinfo->input_scan_number) - scan_number = cinfo->input_scan_number; - cinfo->output_scan_number = scan_number; - /* Perform any dummy output passes, and set up for the real pass */ - return output_pass_setup(cinfo); -} - - -/* - * Finish up after an output pass in buffered-image mode. - * - * Returns FALSE if suspended. The return value need be inspected only if - * a suspending data source is used. - */ - -GLOBAL(boolean) -jpeg_finish_output (j_decompress_ptr cinfo) -{ - if ((cinfo->global_state == DSTATE_SCANNING || - cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { - /* Terminate this pass. */ - /* We do not require the whole pass to have been completed. */ - (*cinfo->master->finish_output_pass) (cinfo); - cinfo->global_state = DSTATE_BUFPOST; - } else if (cinfo->global_state != DSTATE_BUFPOST) { - /* BUFPOST = repeat call after a suspension, anything else is error */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - } - /* Read markers looking for SOS or EOI */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) - return FALSE; /* Suspend, come back later */ - } - cinfo->global_state = DSTATE_BUFIMAGE; - return TRUE; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/libjpegtwrp/jdatadst.c b/libjpegtwrp/jdatadst.c deleted file mode 100644 index a8f6fb0e0..000000000 --- a/libjpegtwrp/jdatadst.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * jdatadst.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains compression data destination routines for the case of - * emitting JPEG data to a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * destination manager. - * IMPORTANT: we assume that fwrite() will correctly transcribe an array of - * JOCTETs into 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - - -/* Expanded data destination object for stdio output */ - -typedef struct { - struct jpeg_destination_mgr pub; /* public fields */ - - FILE * outfile; /* target stream */ - JOCTET * buffer; /* start of buffer */ -} my_destination_mgr; - -typedef my_destination_mgr * my_dest_ptr; - -#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ - - -/* - * Initialize destination --- called by jpeg_start_compress - * before any data is actually written. - */ - -METHODDEF(void) -init_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - /* Allocate the output buffer --- it will be released when done with image */ - dest->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); - - dest->pub.next_output_byte = dest->buffer; - dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; -} - - -/* - * Empty the output buffer --- called whenever buffer fills up. - * - * In typical applications, this should write the entire output buffer - * (ignoring the current state of next_output_byte & free_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been dumped. - * - * In applications that need to be able to suspend compression due to output - * overrun, a FALSE return indicates that the buffer cannot be emptied now. - * In this situation, the compressor will return to its caller (possibly with - * an indication that it has not accepted all the supplied scanlines). The - * application should resume compression after it has made more room in the - * output buffer. Note that there are substantial restrictions on the use of - * suspension --- see the documentation. - * - * When suspending, the compressor will back up to a convenient restart point - * (typically the start of the current MCU). next_output_byte & free_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point will be regenerated after resumption, so do not - * write it out when emptying the buffer externally. - */ - -METHODDEF(boolean) -empty_output_buffer (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - - if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) != - (size_t) OUTPUT_BUF_SIZE) - ERREXIT(cinfo, JERR_FILE_WRITE); - - dest->pub.next_output_byte = dest->buffer; - dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; - - return TRUE; -} - - -/* - * Terminate destination --- called by jpeg_finish_compress - * after all data has been written. Usually needs to flush buffer. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF(void) -term_destination (j_compress_ptr cinfo) -{ - my_dest_ptr dest = (my_dest_ptr) cinfo->dest; - size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer; - - /* Write any data remaining in the buffer */ - if (datacount > 0) { - if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) - ERREXIT(cinfo, JERR_FILE_WRITE); - } - fflush(dest->outfile); - /* Make sure we wrote the output file OK */ - if (ferror(dest->outfile)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * Prepare for output to a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing compression. - */ - -GLOBAL(void) -jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) -{ - my_dest_ptr dest; - - /* The destination object is made permanent so that multiple JPEG images - * can be written to the same file without re-executing jpeg_stdio_dest. - * This makes it dangerous to use this manager and a different destination - * manager serially with the same JPEG object, because their private object - * sizes may be different. Caveat programmer. - */ - if (cinfo->dest == NULL) { /* first time for this JPEG object? */ - cinfo->dest = (struct jpeg_destination_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_destination_mgr)); - } - - dest = (my_dest_ptr) cinfo->dest; - dest->pub.init_destination = init_destination; - dest->pub.empty_output_buffer = empty_output_buffer; - dest->pub.term_destination = term_destination; - dest->outfile = outfile; -} diff --git a/libjpegtwrp/jdatasrc.c b/libjpegtwrp/jdatasrc.c deleted file mode 100644 index edc752bf5..000000000 --- a/libjpegtwrp/jdatasrc.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * jdatasrc.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains decompression data source routines for the case of - * reading JPEG data from a file (or any stdio stream). While these routines - * are sufficient for most applications, some will want to use a different - * source manager. - * IMPORTANT: we assume that fread() will correctly transcribe an array of - * JOCTETs from 8-bit-wide elements on external storage. If char is wider - * than 8 bits on your machine, you may need to do some tweaking. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jerror.h" - - -/* Expanded data source object for stdio input */ - -typedef struct { - struct jpeg_source_mgr pub; /* public fields */ - - FILE * infile; /* source stream */ - JOCTET * buffer; /* start of buffer */ - boolean start_of_file; /* have we gotten any data yet? */ -} my_source_mgr; - -typedef my_source_mgr * my_src_ptr; - -#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ - - -/* - * Initialize source --- called by jpeg_read_header - * before any data is actually read. - */ - -METHODDEF(void) -init_source (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* We reset the empty-input-file flag for each image, - * but we don't clear the input buffer. - * This is correct behavior for reading a series of images from one source. - */ - src->start_of_file = TRUE; -} - - -/* - * Fill the input buffer --- called whenever buffer is emptied. - * - * In typical applications, this should read fresh data into the buffer - * (ignoring the current state of next_input_byte & bytes_in_buffer), - * reset the pointer & count to the start of the buffer, and return TRUE - * indicating that the buffer has been reloaded. It is not necessary to - * fill the buffer entirely, only to obtain at least one more byte. - * - * There is no such thing as an EOF return. If the end of the file has been - * reached, the routine has a choice of ERREXIT() or inserting fake data into - * the buffer. In most cases, generating a warning message and inserting a - * fake EOI marker is the best course of action --- this will allow the - * decompressor to output however much of the image is there. However, - * the resulting error message is misleading if the real problem is an empty - * input file, so we handle that case specially. - * - * In applications that need to be able to suspend compression due to input - * not being available yet, a FALSE return indicates that no more data can be - * obtained right now, but more may be forthcoming later. In this situation, - * the decompressor will return to its caller (with an indication of the - * number of scanlines it has read, if any). The application should resume - * decompression after it has loaded more data into the input buffer. Note - * that there are substantial restrictions on the use of suspension --- see - * the documentation. - * - * When suspending, the decompressor will back up to a convenient restart point - * (typically the start of the current MCU). next_input_byte & bytes_in_buffer - * indicate where the restart point will be if the current call returns FALSE. - * Data beyond this point must be rescanned after resumption, so move it to - * the front of the buffer rather than discarding it. - */ - -METHODDEF(boolean) -fill_input_buffer (j_decompress_ptr cinfo) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - size_t nbytes; - - nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE); - - if (nbytes <= 0) { - if (src->start_of_file) /* Treat empty input file as fatal error */ - ERREXIT(cinfo, JERR_INPUT_EMPTY); - WARNMS(cinfo, JWRN_JPEG_EOF); - /* Insert a fake EOI marker */ - src->buffer[0] = (JOCTET) 0xFF; - src->buffer[1] = (JOCTET) JPEG_EOI; - nbytes = 2; - } - - src->pub.next_input_byte = src->buffer; - src->pub.bytes_in_buffer = nbytes; - src->start_of_file = FALSE; - - return TRUE; -} - - -/* - * Skip data --- used to skip over a potentially large amount of - * uninteresting data (such as an APPn marker). - * - * Writers of suspendable-input applications must note that skip_input_data - * is not granted the right to give a suspension return. If the skip extends - * beyond the data currently in the buffer, the buffer can be marked empty so - * that the next read will cause a fill_input_buffer call that can suspend. - * Arranging for additional bytes to be discarded before reloading the input - * buffer is the application writer's problem. - */ - -METHODDEF(void) -skip_input_data (j_decompress_ptr cinfo, long num_bytes) -{ - my_src_ptr src = (my_src_ptr) cinfo->src; - - /* Just a dumb implementation for now. Could use fseek() except - * it doesn't work on pipes. Not clear that being smart is worth - * any trouble anyway --- large skips are infrequent. - */ - if (num_bytes > 0) { - while (num_bytes > (long) src->pub.bytes_in_buffer) { - num_bytes -= (long) src->pub.bytes_in_buffer; - (void) fill_input_buffer(cinfo); - /* note we assume that fill_input_buffer will never return FALSE, - * so suspension need not be handled. - */ - } - src->pub.next_input_byte += (size_t) num_bytes; - src->pub.bytes_in_buffer -= (size_t) num_bytes; - } -} - - -/* - * An additional method that can be provided by data source modules is the - * resync_to_restart method for error recovery in the presence of RST markers. - * For the moment, this source module just uses the default resync method - * provided by the JPEG library. That method assumes that no backtracking - * is possible. - */ - - -/* - * Terminate source --- called by jpeg_finish_decompress - * after all data has been read. Often a no-op. - * - * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding - * application must deal with any cleanup that should happen even - * for error exit. - */ - -METHODDEF(void) -term_source (j_decompress_ptr cinfo) -{ - /* no work necessary here */ -} - - -/* - * Prepare for input from a stdio stream. - * The caller must have already opened the stream, and is responsible - * for closing it after finishing decompression. - */ - -GLOBAL(void) -jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) -{ - my_src_ptr src; - - /* The source object and input buffer are made permanent so that a series - * of JPEG images can be read from the same file by calling jpeg_stdio_src - * only before the first one. (If we discarded the buffer at the end of - * one image, we'd likely lose the start of the next one.) - * This makes it unsafe to use this manager and a different source - * manager serially with the same JPEG object. Caveat programmer. - */ - if (cinfo->src == NULL) { /* first time for this JPEG object? */ - cinfo->src = (struct jpeg_source_mgr *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_source_mgr)); - src = (my_src_ptr) cinfo->src; - src->buffer = (JOCTET *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - INPUT_BUF_SIZE * SIZEOF(JOCTET)); - } - - src = (my_src_ptr) cinfo->src; - src->pub.init_source = init_source; - src->pub.fill_input_buffer = fill_input_buffer; - src->pub.skip_input_data = skip_input_data; - src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ - src->pub.term_source = term_source; - src->infile = infile; - src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ - src->pub.next_input_byte = NULL; /* until buffer loaded */ -} diff --git a/libjpegtwrp/jdcoefct.c b/libjpegtwrp/jdcoefct.c deleted file mode 100644 index 84ce56fb7..000000000 --- a/libjpegtwrp/jdcoefct.c +++ /dev/null @@ -1,1038 +0,0 @@ -/* - * jdcoefct.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the coefficient buffer controller for decompression. - * This controller is the top level of the JPEG decompressor proper. - * The coefficient buffer lies between entropy decoding and inverse-DCT steps. - * - * In buffered-image mode, this controller is the interface between - * input-oriented processing and output-oriented processing. - * Also, the input side (only) is used when reading a file for transcoding. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* Block smoothing is only applicable for progressive JPEG, so: */ -#ifndef D_PROGRESSIVE_SUPPORTED -#undef BLOCK_SMOOTHING_SUPPORTED -#endif - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_coef_controller pub; /* public fields */ - - /* These variables keep track of the current location of the input side. */ - /* cinfo->input_iMCU_row is also used for this. */ - JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ - int MCU_vert_offset; /* counts MCU rows within iMCU row */ - int MCU_rows_per_iMCU_row; /* number of such rows needed */ - - /* The output side's location is represented by cinfo->output_iMCU_row. */ - - /* In single-pass modes, it's sufficient to buffer just one MCU. - * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, - * and let the entropy decoder write into that workspace each time. - * (On 80x86, the workspace is FAR even though it's not really very big; - * this is to keep the module interfaces unchanged when a large coefficient - * buffer is necessary.) - * In multi-pass modes, this array points to the current MCU's blocks - * within the virtual arrays; it is used only by the input side. - */ - JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* In multi-pass modes, we need a virtual block array for each component. */ - jvirt_barray_ptr whole_image[MAX_COMPONENTS]; -#endif - -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* When doing block smoothing, we latch coefficient Al values here */ - int * coef_bits_latch; -#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ -#endif -} my_coef_controller; - -typedef my_coef_controller * my_coef_ptr; - -/* Forward declarations */ -METHODDEF(int) decompress_onepass - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#ifdef D_MULTISCAN_FILES_SUPPORTED -METHODDEF(int) decompress_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif -#ifdef BLOCK_SMOOTHING_SUPPORTED -LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); -METHODDEF(int) decompress_smooth_data - JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); -#endif - - -LOCAL(void) -start_iMCU_row (j_decompress_ptr cinfo) -/* Reset within-iMCU-row counters for a new row (input side) */ -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* In an interleaved scan, an MCU row is the same as an iMCU row. - * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. - * But at the bottom of the image, process only what's left. - */ - if (cinfo->comps_in_scan > 1) { - coef->MCU_rows_per_iMCU_row = 1; - } else { - if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; - else - coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; - } - - coef->MCU_ctr = 0; - coef->MCU_vert_offset = 0; -} - - -/* - * Initialize for an input processing pass. - */ - -METHODDEF(void) -start_input_pass (j_decompress_ptr cinfo) -{ - cinfo->input_iMCU_row = 0; - start_iMCU_row(cinfo); -} - - -/* - * Initialize for an output processing pass. - */ - -METHODDEF(void) -start_output_pass (j_decompress_ptr cinfo) -{ -#ifdef BLOCK_SMOOTHING_SUPPORTED - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - - /* If multipass, check to see whether to use block smoothing on this pass */ - if (coef->pub.coef_arrays != NULL) { - if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) - coef->pub.decompress_data = decompress_smooth_data; - else - coef->pub.decompress_data = decompress_data; - } -#endif - cinfo->output_iMCU_row = 0; -} - - -/* - * Decompress and return some data in the single-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Input and output must run in lockstep since we have only a one-MCU buffer. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image, - * which we index according to the component's SOF position. - */ - -METHODDEF(int) -decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - int blkn, ci, xindex, yindex, yoffset, useful_width; - JSAMPARRAY output_ptr; - JDIMENSION start_col, output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - -#ifdef ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode) { - last_MCU_col = - (cinfo->coef->MCU_column_right_boundary - - cinfo->coef->MCU_column_left_boundary) - 1; - } -#endif - - /* Loop to process as much as one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; - MCU_col_num++) { - /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ - if (MCU_col_num < (unsigned int)coef->pub.MCU_columns_to_skip) { - (*cinfo->entropy->decode_mcu_discard_coef) (cinfo); - continue; - } else { - jzero_far((void FAR *) coef->MCU_buffer[0], - (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Determine where data should go in output_buf and do the IDCT thing. - * We skip dummy blocks at the right and bottom edges (but blkn gets - * incremented past them!). Note the inner loop relies on having - * allocated the MCU_buffer[] blocks sequentially. - */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) { - blkn += compptr->MCU_blocks; - continue; - } - inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; - useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width - : compptr->last_col_width; - output_ptr = output_buf[compptr->component_index] + - yoffset * compptr->DCT_scaled_size; - start_col = MCU_col_num * compptr->MCU_sample_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - if (cinfo->input_iMCU_row < last_iMCU_row || - yoffset+yindex < compptr->last_row_height) { - output_col = start_col; - for (xindex = 0; xindex < useful_width; xindex++) { - (*inverse_DCT) (cinfo, compptr, - (JCOEFPTR) coef->MCU_buffer[blkn+xindex], - output_ptr, output_col); - output_col += compptr->DCT_scaled_size; - } - } - blkn += compptr->MCU_width; - output_ptr += compptr->DCT_scaled_size; - } - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - cinfo->output_iMCU_row++; - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - - -/* - * Dummy consume-input routine for single-pass operation. - */ - -METHODDEF(int) -dummy_consume_data (j_decompress_ptr cinfo) -{ - return JPEG_SUSPENDED; /* Always indicate nothing was done */ -} - -#ifdef D_MULTISCAN_FILES_SUPPORTED -/* - * Consume input data and store it in the full-image coefficient buffer. - * We read as much as one fully interleaved MCU row ("iMCU" row) per call, - * ie, v_samp_factor block rows for each component in the scan. - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - */ - -METHODDEF(int) -consume_data (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - cinfo->tile_decode ? 0 : cinfo->input_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, TRUE); - /* Note: entropy decoder expects buffer to be zeroed, - * but this is handled automatically by the memory manager - * because we requested a pre-zeroed array. - */ - } - unsigned int MCUs_per_row = cinfo->MCUs_per_row; -#ifdef ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode) { - int iMCU_width_To_MCU_width; - if (cinfo->comps_in_scan > 1) { - // Interleaved - iMCU_width_To_MCU_width = 1; - } else { - // Non-intervleaved - iMCU_width_To_MCU_width = cinfo->cur_comp_info[0]->h_samp_factor; - } - MCUs_per_row = jmin(MCUs_per_row, - (cinfo->coef->column_right_boundary - cinfo->coef->column_left_boundary) - * cinfo->entropy->index->MCU_sample_size * iMCU_width_To_MCU_width); - } -#endif - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - // configure huffman decoder -#ifdef ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode) { - huffman_scan_header scan_header = - cinfo->entropy->index->scan[cinfo->input_scan_number]; - int col_offset = cinfo->coef->column_left_boundary; - (*cinfo->entropy->configure_huffman_decoder) (cinfo, - scan_header.offset[cinfo->input_iMCU_row] - [col_offset + yoffset * scan_header.MCUs_per_row]); - } -#endif - - // zero all blocks - for (MCU_col_num = coef->MCU_ctr; MCU_col_num < MCUs_per_row; - MCU_col_num++) { - /* Construct list of pointers to DCT blocks belonging to this MCU */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; -#ifdef ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode && cinfo->input_scan_number == 0) { - // need to do pre-zero ourselves. - jzero_far((void FAR *) coef->MCU_buffer[blkn-1], - (size_t) (SIZEOF(JBLOCK))); - } -#endif - } - } - } - - - /* Try to fetch the MCU. */ - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - -/* - * Consume input data and store it in the coefficient buffer. - * Read one fully interleaved MCU row ("iMCU" row) per call. - */ - -METHODDEF(int) -consume_data_multi_scan (j_decompress_ptr cinfo) -{ - huffman_index *index = cinfo->entropy->index; - int i, retcode, ci; - int mcu = cinfo->input_iMCU_row; - jinit_phuff_decoder(cinfo); - for (i = 0; i < index->scan_count; i++) { - (*cinfo->inputctl->finish_input_pass) (cinfo); - jset_input_stream_position(cinfo, index->scan[i].bitstream_offset); - cinfo->output_iMCU_row = mcu; - cinfo->unread_marker = 0; - // Consume SOS and DHT headers - retcode = (*cinfo->inputctl->consume_markers) (cinfo, index, i); - cinfo->input_iMCU_row = mcu; - cinfo->input_scan_number = i; - cinfo->entropy->index = index; - // Consume scan block data - consume_data(cinfo); - } - cinfo->input_iMCU_row = mcu + 1; - cinfo->input_scan_number = 0; - cinfo->output_scan_number = 0; - return JPEG_ROW_COMPLETED; -} - -/* - * Same as consume_data, expect for saving the Huffman decode information - * - bitstream offset and DC coefficient to index. - */ - -METHODDEF(int) -consume_data_build_huffman_index_baseline (j_decompress_ptr cinfo, - huffman_index *index, int current_scan) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKROW buffer_ptr; - - huffman_scan_header *scan_header = index->scan + current_scan; - scan_header->MCU_rows_per_iMCU_row = coef->MCU_rows_per_iMCU_row; - - size_t allocate_size = coef->MCU_rows_per_iMCU_row - * jdiv_round_up(cinfo->MCUs_per_row, index->MCU_sample_size) - * sizeof(huffman_offset_data); - scan_header->offset[cinfo->input_iMCU_row] = - (huffman_offset_data*)malloc(allocate_size); - index->mem_used += allocate_size; - - huffman_offset_data *offset_data = scan_header->offset[cinfo->input_iMCU_row]; - - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - // Record huffman bit offset - if (MCU_col_num % index->MCU_sample_size == 0) { - (*cinfo->entropy->get_huffman_decoder_configuration) - (cinfo, offset_data); - ++offset_data; - } - - /* Try to fetch the MCU. */ - if (! (*cinfo->entropy->decode_mcu_discard_coef) (cinfo)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - /* Completed the iMCU row, advance counters for next one */ - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - -/* - * Same as consume_data, expect for saving the Huffman decode information - * - bitstream offset and DC coefficient to index. - */ - -METHODDEF(int) -consume_data_build_huffman_index_progressive (j_decompress_ptr cinfo, - huffman_index *index, int current_scan) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION MCU_col_num; /* index of current MCU within row */ - int blkn, ci, xindex, yindex, yoffset; - JDIMENSION start_col; - JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; - JBLOCKROW buffer_ptr; - jpeg_component_info *compptr; - - int factor = 4; // maximum factor is 4. - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - factor = jmin(factor, cinfo->cur_comp_info[ci]->h_samp_factor); - - int sample_size = index->MCU_sample_size * factor; - huffman_scan_header *scan_header = index->scan + current_scan; - scan_header->MCU_rows_per_iMCU_row = coef->MCU_rows_per_iMCU_row; - scan_header->MCUs_per_row = jdiv_round_up(cinfo->MCUs_per_row, sample_size); - scan_header->comps_in_scan = cinfo->comps_in_scan; - - size_t allocate_size = coef->MCU_rows_per_iMCU_row - * scan_header->MCUs_per_row * sizeof(huffman_offset_data); - scan_header->offset[cinfo->input_iMCU_row] = - (huffman_offset_data*)malloc(allocate_size); - index->mem_used += allocate_size; - - huffman_offset_data *offset_data = scan_header->offset[cinfo->input_iMCU_row]; - - /* Align the virtual buffers for the components used in this scan. */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - buffer[ci] = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], - 0, // Only need one row buffer - (JDIMENSION) compptr->v_samp_factor, TRUE); - } - /* Loop to process one whole iMCU row */ - for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; - yoffset++) { - for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; - MCU_col_num++) { - /* For each MCU, we loop through different color components. - * Then, for each color component we will get a list of pointers to DCT - * blocks in the virtual buffer. - */ - blkn = 0; /* index of current DCT block within MCU */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - start_col = MCU_col_num * compptr->MCU_width; - /* Get the list of pointers to DCT blocks in - * the virtual buffer in a color component of the MCU. - */ - for (yindex = 0; yindex < compptr->MCU_height; yindex++) { - buffer_ptr = buffer[ci][yindex+yoffset] + start_col; - for (xindex = 0; xindex < compptr->MCU_width; xindex++) { - coef->MCU_buffer[blkn++] = buffer_ptr++; - if (cinfo->input_scan_number == 0) { - // need to do pre-zero by ourself. - jzero_far((void FAR *) coef->MCU_buffer[blkn-1], - (size_t) (SIZEOF(JBLOCK))); - } - } - } - } - // Record huffman bit offset - if (MCU_col_num % sample_size == 0) { - (*cinfo->entropy->get_huffman_decoder_configuration) - (cinfo, offset_data); - ++offset_data; - } - /* Try to fetch the MCU. */ - if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { - /* Suspension forced; update state counters and exit */ - coef->MCU_vert_offset = yoffset; - coef->MCU_ctr = MCU_col_num; - return JPEG_SUSPENDED; - } - } - /* Completed an MCU row, but perhaps not an iMCU row */ - coef->MCU_ctr = 0; - } - (*cinfo->entropy->get_huffman_decoder_configuration) - (cinfo, &scan_header->prev_MCU_offset); - /* Completed the iMCU row, advance counters for next one */ - if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { - start_iMCU_row(cinfo); - return JPEG_ROW_COMPLETED; - } - /* Completed the scan */ - (*cinfo->inputctl->finish_input_pass) (cinfo); - return JPEG_SCAN_COMPLETED; -} - -/* - * Decompress and return some data in the multi-pass case. - * Always attempts to emit one fully interleaved MCU row ("iMCU" row). - * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. - * - * NB: output_buf contains a plane for each component in image. - */ - -METHODDEF(int) -decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num; - int ci, block_row, block_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number < cinfo->output_scan_number || - (cinfo->input_scan_number == cinfo->output_scan_number && - cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Align the virtual buffer for this component. */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - cinfo->tile_decode ? 0 : cinfo->output_iMCU_row * compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) - block_rows = compptr->v_samp_factor; - else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - } - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - int width_in_blocks = compptr->width_in_blocks; - int start_block = 0; -#if ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode) { - // width_in_blocks for a component depends on its h_samp_factor. - width_in_blocks = jmin(width_in_blocks, - (cinfo->coef->MCU_column_right_boundary - - cinfo->coef->MCU_column_left_boundary) * - compptr->h_samp_factor); - start_block = coef->pub.MCU_columns_to_skip * - compptr->h_samp_factor; - } -#endif - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - output_col = start_block * compptr->DCT_scaled_size; - buffer_ptr += start_block; - for (block_num = start_block; block_num < (unsigned int)width_in_blocks; block_num++) { - (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, - output_ptr, output_col); - buffer_ptr++; - output_col += compptr->DCT_scaled_size; - } - output_ptr += compptr->DCT_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -#ifdef BLOCK_SMOOTHING_SUPPORTED - -/* - * This code applies interblock smoothing as described by section K.8 - * of the JPEG standard: the first 5 AC coefficients are estimated from - * the DC values of a DCT block and its 8 neighboring blocks. - * We apply smoothing only for progressive JPEG decoding, and only if - * the coefficients it can estimate are not yet known to full precision. - */ - -/* Natural-order array positions of the first 5 zigzag-order coefficients */ -#define Q01_POS 1 -#define Q10_POS 8 -#define Q20_POS 16 -#define Q11_POS 9 -#define Q02_POS 2 - -/* - * Determine whether block smoothing is applicable and safe. - * We also latch the current states of the coef_bits[] entries for the - * AC coefficients; otherwise, if the input side of the decompressor - * advances into a new scan, we might think the coefficients are known - * more accurately than they really are. - */ - -LOCAL(boolean) -smoothing_ok (j_decompress_ptr cinfo) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - boolean smoothing_useful = FALSE; - int ci, coefi; - jpeg_component_info *compptr; - JQUANT_TBL * qtable; - int * coef_bits; - int * coef_bits_latch; - - if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) - return FALSE; - - /* Allocate latch area if not already done */ - if (coef->coef_bits_latch == NULL) - coef->coef_bits_latch = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * - (SAVED_COEFS * SIZEOF(int))); - coef_bits_latch = coef->coef_bits_latch; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* All components' quantization values must already be latched. */ - if ((qtable = compptr->quant_table) == NULL) - return FALSE; - /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ - if (qtable->quantval[0] == 0 || - qtable->quantval[Q01_POS] == 0 || - qtable->quantval[Q10_POS] == 0 || - qtable->quantval[Q20_POS] == 0 || - qtable->quantval[Q11_POS] == 0 || - qtable->quantval[Q02_POS] == 0) - return FALSE; - /* DC values must be at least partly known for all components. */ - coef_bits = cinfo->coef_bits[ci]; - if (coef_bits[0] < 0) - return FALSE; - /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ - for (coefi = 1; coefi <= 5; coefi++) { - coef_bits_latch[coefi] = coef_bits[coefi]; - if (coef_bits[coefi] != 0) - smoothing_useful = TRUE; - } - coef_bits_latch += SAVED_COEFS; - } - - return smoothing_useful; -} - - -/* - * Variant of decompress_data for use when doing block smoothing. - */ - -METHODDEF(int) -decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) -{ - my_coef_ptr coef = (my_coef_ptr) cinfo->coef; - JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; - JDIMENSION block_num, last_block_column; - int ci, block_row, block_rows, access_rows; - JBLOCKARRAY buffer; - JBLOCKROW buffer_ptr, prev_block_row, next_block_row; - JSAMPARRAY output_ptr; - JDIMENSION output_col; - jpeg_component_info *compptr; - inverse_DCT_method_ptr inverse_DCT; - boolean first_row, last_row; - JBLOCK workspace; - int *coef_bits; - JQUANT_TBL *quanttbl; - INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; - int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; - int Al, pred; - - /* Force some input to be done if we are getting ahead of the input. */ - while (cinfo->input_scan_number <= cinfo->output_scan_number && - ! cinfo->inputctl->eoi_reached) { - if (cinfo->input_scan_number == cinfo->output_scan_number) { - /* If input is working on current scan, we ordinarily want it to - * have completed the current row. But if input scan is DC, - * we want it to keep one row ahead so that next block row's DC - * values are up to date. - */ - JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; - if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) - break; - } - if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) - return JPEG_SUSPENDED; - } - - /* OK, output from the virtual arrays. */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Don't bother to IDCT an uninteresting component. */ - if (! compptr->component_needed) - continue; - /* Count non-dummy DCT block rows in this iMCU row. */ - if (cinfo->output_iMCU_row < last_iMCU_row) { - block_rows = compptr->v_samp_factor; - access_rows = block_rows * 2; /* this and next iMCU row */ - last_row = FALSE; - } else { - /* NB: can't use last_row_height here; it is input-side-dependent! */ - block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (block_rows == 0) block_rows = compptr->v_samp_factor; - access_rows = block_rows; /* this iMCU row only */ - last_row = TRUE; - } - /* Align the virtual buffer for this component. */ - if (cinfo->output_iMCU_row > 0) { - access_rows += compptr->v_samp_factor; /* prior iMCU row too */ - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, - (JDIMENSION) access_rows, FALSE); - buffer += compptr->v_samp_factor; /* point to current iMCU row */ - first_row = FALSE; - } else { - buffer = (*cinfo->mem->access_virt_barray) - ((j_common_ptr) cinfo, coef->whole_image[ci], - (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); - first_row = TRUE; - } - /* Fetch component-dependent info */ - coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); - quanttbl = compptr->quant_table; - Q00 = quanttbl->quantval[0]; - Q01 = quanttbl->quantval[Q01_POS]; - Q10 = quanttbl->quantval[Q10_POS]; - Q20 = quanttbl->quantval[Q20_POS]; - Q11 = quanttbl->quantval[Q11_POS]; - Q02 = quanttbl->quantval[Q02_POS]; - inverse_DCT = cinfo->idct->inverse_DCT[ci]; - output_ptr = output_buf[ci]; - /* Loop over all DCT blocks to be processed. */ - for (block_row = 0; block_row < block_rows; block_row++) { - buffer_ptr = buffer[block_row]; - if (first_row && block_row == 0) - prev_block_row = buffer_ptr; - else - prev_block_row = buffer[block_row-1]; - if (last_row && block_row == block_rows-1) - next_block_row = buffer_ptr; - else - next_block_row = buffer[block_row+1]; - /* We fetch the surrounding DC values using a sliding-register approach. - * Initialize all nine here so as to do the right thing on narrow pics. - */ - DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; - DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; - DC7 = DC8 = DC9 = (int) next_block_row[0][0]; - output_col = 0; - last_block_column = compptr->width_in_blocks - 1; - for (block_num = 0; block_num <= last_block_column; block_num++) { - /* Fetch current DCT block into workspace so we can modify it. */ - jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); - /* Update DC values */ - if (block_num < last_block_column) { - DC3 = (int) prev_block_row[1][0]; - DC6 = (int) buffer_ptr[1][0]; - DC9 = (int) next_block_row[1][0]; - } - /* Compute coefficient estimates per K.8. - * An estimate is applied only if coefficient is still zero, - * and is not known to be fully accurate. - */ - /* AC01 */ - if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { - num = 36 * Q00 * (DC4 - DC6); - if (num >= 0) { - pred = (int) (((Q01<<7) + num) / (Q01<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q10<<7) + num) / (Q10<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q20<<7) + num) / (Q20<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q11<<7) + num) / (Q11<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { - pred = (int) (((Q02<<7) + num) / (Q02<<8)); - if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_scaled_size; - } - output_ptr += compptr->DCT_scaled_size; - } - } - - if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) - return JPEG_ROW_COMPLETED; - return JPEG_SCAN_COMPLETED; -} - -#endif /* BLOCK_SMOOTHING_SUPPORTED */ - - -/* - * Initialize coefficient buffer controller. - */ - -GLOBAL(void) -jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_coef_ptr coef; - - coef = (my_coef_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_coef_controller)); - cinfo->coef = (struct jpeg_d_coef_controller *) coef; - coef->pub.start_input_pass = start_input_pass; - coef->pub.start_output_pass = start_output_pass; - coef->pub.column_left_boundary = 0; - coef->pub.column_right_boundary = 0; - coef->pub.MCU_columns_to_skip = 0; -#ifdef BLOCK_SMOOTHING_SUPPORTED - coef->coef_bits_latch = NULL; -#endif - -#ifdef ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode) { - if (cinfo->progressive_mode) { - /* Allocate one iMCU row virtual array, coef->whole_image[ci], - * for each color component, padded to a multiple of h_samp_factor - * DCT blocks in the horizontal direction. - */ - int ci, access_rows; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - access_rows = compptr->v_samp_factor; - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) compptr->v_samp_factor, // one iMCU row - (JDIMENSION) access_rows); - } - coef->pub.consume_data_build_huffman_index = - consume_data_build_huffman_index_progressive; - coef->pub.consume_data = consume_data_multi_scan; - coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ - coef->pub.decompress_data = decompress_onepass; - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->pub.consume_data_build_huffman_index = - consume_data_build_huffman_index_baseline; - coef->pub.consume_data = dummy_consume_data; - coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ - coef->pub.decompress_data = decompress_onepass; - } - return; - } -#endif - - /* Create the coefficient buffer. */ - if (need_full_buffer) { -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* Allocate a full-image virtual array for each component, */ - /* padded to a multiple of samp_factor DCT blocks in each direction. */ - /* Note we ask for a pre-zeroed array. */ - int ci, access_rows; - jpeg_component_info *compptr; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - access_rows = compptr->v_samp_factor; -#ifdef BLOCK_SMOOTHING_SUPPORTED - /* If block smoothing could be used, need a bigger window */ - if (cinfo->progressive_mode) - access_rows *= 3; -#endif - coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) access_rows); - } - coef->pub.consume_data = consume_data; - coef->pub.decompress_data = decompress_data; - coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - /* We only need a single-MCU buffer. */ - JBLOCKROW buffer; - int i; - - buffer = (JBLOCKROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); - for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { - coef->MCU_buffer[i] = buffer + i; - } - coef->pub.consume_data = dummy_consume_data; - coef->pub.decompress_data = decompress_onepass; - coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ - } -} diff --git a/libjpegtwrp/jdcolor.c b/libjpegtwrp/jdcolor.c deleted file mode 100644 index 9a6519e3e..000000000 --- a/libjpegtwrp/jdcolor.c +++ /dev/null @@ -1,976 +0,0 @@ -/* - * jdcolor.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains output colorspace conversion routines. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -/* Private subobject */ - -typedef struct { - struct jpeg_color_deconverter pub; /* public fields */ - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - INT32 * Cb_g_tab; /* => table for Cb to G conversion */ -} my_color_deconverter; - -typedef my_color_deconverter * my_cconvert_ptr; - - -#ifdef ANDROID_RGB - -/* Declarations for ordered dithering. - * - * We use 4x4 ordered dither array packed into 32 bits. This array is - * sufficent for dithering RGB_888 to RGB_565. - */ - -#define DITHER_MASK 0x3 -#define DITHER_ROTATE(x) (((x)<<24) | (((x)>>8)&0x00FFFFFF)) -static const INT32 dither_matrix[4] = { - 0x0008020A, - 0x0C040E06, - 0x030B0109, - 0x0F070D05 -}; - -#endif - - -/**************** YCbCr -> RGB conversion: most common case **************/ - -/* - * YCbCr is defined per CCIR 601-1, except that Cb and Cr are - * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. - * The conversion equations to be implemented are therefore - * R = Y + 1.40200 * Cr - * G = Y - 0.34414 * Cb - 0.71414 * Cr - * B = Y + 1.77200 * Cb - * where Cb and Cr represent the incoming values less CENTERJSAMPLE. - * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) - * - * To avoid floating-point arithmetic, we represent the fractional constants - * as integers scaled up by 2^16 (about 4 digits precision); we have to divide - * the products by 2^16, with appropriate rounding, to get the correct answer. - * Notice that Y, being an integral input, does not contribute any fraction - * so it need not participate in the rounding. - * - * For even more speed, we avoid doing any multiplications in the inner loop - * by precalculating the constants times Cb and Cr for all possible values. - * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); - * for 12-bit samples it is still acceptable. It's not very reasonable for - * 16-bit samples, but if you want lossless storage you shouldn't be changing - * colorspace anyway. - * The Cr=>R and Cb=>B values can be rounded to integers in advance; the - * values for the G calculation are left scaled up, since we must add them - * together before rounding. - */ - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. - */ - -LOCAL(void) -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - int i; - INT32 x; - SHIFT_TEMPS - - cconvert->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - cconvert->Cr_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - cconvert->Cb_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - cconvert->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - cconvert->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -#ifdef NEEDS_ARM_ERRATA_754319_754320 - asm volatile ( "vmov s0,s0\n" ); -#endif -} - -/* - * Convert some rows of samples to the output colorspace. - * - * Note that we change from noninterleaved, one-plane-per-component format - * to interleaved-pixel format. The output buffer is therefore three times - * as wide as the input buffer. - * A starting row offset is provided only for the input buffer. The caller - * can easily adjust the passed output_buf value to accommodate any row - * offset required on that side. - */ - -METHODDEF(void) -ycc_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -#ifdef ANDROID_JPEG_USE_VENUM -/* - * Converts YCC->RGB888 using VeNum instructions. - */ -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - JSAMPROW inptr0, inptr1, inptr2; - JSAMPROW outptr; - JDIMENSION row; - - for (row = 0; row < (JDIMENSION)num_rows; row++) - { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - - input_row++; - outptr = *output_buf++; - - yvup2bgr888_venum((UINT8*) inptr0, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr, - cinfo->output_width); - } -} -#else -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; - outptr[RGB_GREEN] = range_limit[y + - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS))]; - outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; - outptr += RGB_PIXELSIZE; - } - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - -#ifdef ANDROID_RGB -METHODDEF(void) -ycc_rgba_8888_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -#ifdef ANDROID_JPEG_USE_VENUM -/* - * Converts YCC->RGBA8888 using VeNum instructions. - */ -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - JSAMPROW inptr0, inptr1, inptr2; - JSAMPROW outptr; - JDIMENSION row; - - for (row = 0; row < (JDIMENSION)num_rows; row++) - { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - - yvup2abgr8888_venum((UINT8*) inptr0, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr, - cinfo->output_width); - } -} - -#else -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; - outptr[RGB_GREEN] = range_limit[y + - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS))]; - outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; - outptr[RGB_ALPHA] = 0xFF; - outptr += 4; - } - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - -METHODDEF(void) -ycc_rgb_565_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -#if defined(ANDROID_JPEG_USE_VENUM) -/* - * Converts YCC->RGB565 using VeNum instructions. - */ -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - JSAMPROW inptr0, inptr1, inptr2; - JSAMPROW outptr; - JDIMENSION row; - - for (row = 0; row < (JDIMENSION)num_rows; row++) - { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - - yvup2rgb565_venum((UINT8*) inptr0, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr, - cinfo->output_width); - } -} -#else -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - INT32 rgb; - unsigned int r, g, b; - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - - if (PACK_NEED_ALIGNMENT(outptr)) { - y = GETJSAMPLE(*inptr0++); - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - r = range_limit[y + Crrtab[cr]]; - g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))]; - b = range_limit[y + Cbbtab[cb]]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - outptr += 2; - num_cols--; - } - for (col = 0; col < (num_cols>>1); col++) { - y = GETJSAMPLE(*inptr0++); - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - r = range_limit[y + Crrtab[cr]]; - g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))]; - b = range_limit[y + Cbbtab[cb]]; - rgb = PACK_SHORT_565(r,g,b); - - y = GETJSAMPLE(*inptr0++); - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - r = range_limit[y + Crrtab[cr]]; - g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))]; - b = range_limit[y + Cbbtab[cb]]; - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_ALIGNED_PIXELS(outptr, rgb); - outptr += 4; - } - if (num_cols&1) { - y = GETJSAMPLE(*inptr0); - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - r = range_limit[y + Crrtab[cr]]; - g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))]; - b = range_limit[y + Cbbtab[cb]]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - } - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - -METHODDEF(void) -ycc_rgb_565D_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK]; - SHIFT_TEMPS - - while (--num_rows >= 0) { - INT32 rgb; - unsigned int r, g, b; - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - if (PACK_NEED_ALIGNMENT(outptr)) { - y = GETJSAMPLE(*inptr0++); - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)]; - g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)]; - b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - outptr += 2; - num_cols--; - } - for (col = 0; col < (num_cols>>1); col++) { - y = GETJSAMPLE(*inptr0++); - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)]; - g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)]; - b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr0++); - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)]; - g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)]; - b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_ALIGNED_PIXELS(outptr, rgb); - outptr += 4; - } - if (num_cols&1) { - y = GETJSAMPLE(*inptr0); - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)]; - g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)]; - b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - } - } -} - -#endif - -/**************** Cases other than YCbCr -> RGB(A) **************/ - -#ifdef ANDROID_RGB -METHODDEF(void) -rgb_rgba_8888_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - *outptr++ = *inptr0++; - *outptr++ = *inptr1++; - *outptr++ = *inptr2++; - *outptr++ = 0xFF; - } - } -} - -METHODDEF(void) -rgb_rgb_565_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - SHIFT_TEMPS - - while (--num_rows >= 0) { - INT32 rgb; - unsigned int r, g, b; - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - if (PACK_NEED_ALIGNMENT(outptr)) { - r = GETJSAMPLE(*inptr0++); - g = GETJSAMPLE(*inptr1++); - b = GETJSAMPLE(*inptr2++); - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - outptr += 2; - num_cols--; - } - for (col = 0; col < (num_cols>>1); col++) { - r = GETJSAMPLE(*inptr0++); - g = GETJSAMPLE(*inptr1++); - b = GETJSAMPLE(*inptr2++); - rgb = PACK_SHORT_565(r,g,b); - r = GETJSAMPLE(*inptr0++); - g = GETJSAMPLE(*inptr1++); - b = GETJSAMPLE(*inptr2++); - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_ALIGNED_PIXELS(outptr, rgb); - outptr += 4; - } - if (num_cols&1) { - r = GETJSAMPLE(*inptr0); - g = GETJSAMPLE(*inptr1); - b = GETJSAMPLE(*inptr2); - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - } - } -} - - -METHODDEF(void) -rgb_rgb_565D_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2; - register JDIMENSION col; - register JSAMPLE * range_limit = cinfo->sample_range_limit; - JDIMENSION num_cols = cinfo->output_width; - INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK]; - SHIFT_TEMPS - - while (--num_rows >= 0) { - INT32 rgb; - unsigned int r, g, b; - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - input_row++; - outptr = *output_buf++; - if (PACK_NEED_ALIGNMENT(outptr)) { - r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0++), d0)]; - g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1++), d0)]; - b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2++), d0)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - outptr += 2; - num_cols--; - } - for (col = 0; col < (num_cols>>1); col++) { - r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0++), d0)]; - g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1++), d0)]; - b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2++), d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_SHORT_565(r,g,b); - r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0++), d0)]; - g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1++), d0)]; - b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2++), d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_ALIGNED_PIXELS(outptr, rgb); - outptr += 4; - } - if (num_cols&1) { - r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0), d0)]; - g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1), d0)]; - b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2), d0)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - } - } -} - -#endif - -/* - * Color conversion for no colorspace change: just copy the data, - * converting from separate-planes to interleaved representation. - */ - -METHODDEF(void) -null_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION count; - register int num_components = cinfo->num_components; - JDIMENSION num_cols = cinfo->output_width; - int ci; - - while (--num_rows >= 0) { - for (ci = 0; ci < num_components; ci++) { - inptr = input_buf[ci][input_row]; - outptr = output_buf[0] + ci; - for (count = num_cols; count > 0; count--) { - *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ - outptr += num_components; - } - } - input_row++; - output_buf++; - } -} - - -/* - * Color conversion for grayscale: just copy the data. - * This also works for YCbCr -> grayscale conversion, in which - * we just copy the Y (luminance) component and ignore chrominance. - */ - -METHODDEF(void) -grayscale_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, - num_rows, cinfo->output_width); -} - - -/* - * Convert grayscale to RGB: just duplicate the graylevel three times. - * This is provided to support applications that don't want to cope - * with grayscale as a separate case. - */ - -METHODDEF(void) -gray_rgb_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - inptr = input_buf[0][input_row++]; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - /* We can dispense with GETJSAMPLE() here */ - outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; - outptr += RGB_PIXELSIZE; - } - } -} - -#ifdef ANDROID_RGB -METHODDEF(void) -gray_rgba_8888_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - inptr = input_buf[0][input_row++]; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - /* We can dispense with GETJSAMPLE() here */ - outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; - outptr[RGB_ALPHA] = 0xff; - outptr += 4; - } - } -} - -METHODDEF(void) -gray_rgb_565_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - - while (--num_rows >= 0) { - INT32 rgb; - unsigned int g; - inptr = input_buf[0][input_row++]; - outptr = *output_buf++; - if (PACK_NEED_ALIGNMENT(outptr)) { - g = *inptr++; - rgb = PACK_SHORT_565(g, g, g); - *(INT16*)outptr = rgb; - outptr += 2; - num_cols--; - } - for (col = 0; col < (num_cols>>1); col++) { - g = *inptr++; - rgb = PACK_SHORT_565(g, g, g); - g = *inptr++; - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(g, g, g)); - WRITE_TWO_ALIGNED_PIXELS(outptr, rgb); - outptr += 4; - } - if (num_cols&1) { - g = *inptr; - rgb = PACK_SHORT_565(g, g, g); - *(INT16*)outptr = rgb; - } - } -} - -METHODDEF(void) -gray_rgb_565D_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - register JSAMPROW inptr, outptr; - register JDIMENSION col; - register JSAMPLE * range_limit = cinfo->sample_range_limit; - JDIMENSION num_cols = cinfo->output_width; - INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK]; - - while (--num_rows >= 0) { - INT32 rgb; - unsigned int g; - inptr = input_buf[0][input_row++]; - outptr = *output_buf++; - if (PACK_NEED_ALIGNMENT(outptr)) { - g = *inptr++; - g = range_limit[DITHER_565_R(g, d0)]; - rgb = PACK_SHORT_565(g, g, g); - *(INT16*)outptr = rgb; - outptr += 2; - num_cols--; - } - for (col = 0; col < (num_cols>>1); col++) { - g = *inptr++; - g = range_limit[DITHER_565_R(g, d0)]; - rgb = PACK_SHORT_565(g, g, g); - d0 = DITHER_ROTATE(d0); - g = *inptr++; - g = range_limit[DITHER_565_R(g, d0)]; - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(g, g, g)); - d0 = DITHER_ROTATE(d0); - WRITE_TWO_ALIGNED_PIXELS(outptr, rgb); - outptr += 4; - } - if (num_cols&1) { - g = *inptr; - g = range_limit[DITHER_565_R(g, d0)]; - rgb = PACK_SHORT_565(g, g, g); - *(INT16*)outptr = rgb; - } - } -} -#endif - -/* - * Adobe-style YCCK->CMYK conversion. - * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same - * conversion as above, while passing K (black) unchanged. - * We assume build_ycc_rgb_table has been called. - */ - -METHODDEF(void) -ycck_cmyk_convert (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows) -{ - my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; - register int y, cb, cr; - register JSAMPROW outptr; - register JSAMPROW inptr0, inptr1, inptr2, inptr3; - register JDIMENSION col; - JDIMENSION num_cols = cinfo->output_width; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - register int * Crrtab = cconvert->Cr_r_tab; - register int * Cbbtab = cconvert->Cb_b_tab; - register INT32 * Crgtab = cconvert->Cr_g_tab; - register INT32 * Cbgtab = cconvert->Cb_g_tab; - SHIFT_TEMPS - - while (--num_rows >= 0) { - inptr0 = input_buf[0][input_row]; - inptr1 = input_buf[1][input_row]; - inptr2 = input_buf[2][input_row]; - inptr3 = input_buf[3][input_row]; - input_row++; - outptr = *output_buf++; - for (col = 0; col < num_cols; col++) { - y = GETJSAMPLE(inptr0[col]); - cb = GETJSAMPLE(inptr1[col]); - cr = GETJSAMPLE(inptr2[col]); - /* Range-limiting is essential due to noise introduced by DCT losses. */ - outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ - outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ - ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], - SCALEBITS)))]; - outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ - /* K passes through unchanged */ - outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ - outptr += 4; - } - } -} - - -/* - * Empty method for start_pass. - */ - -METHODDEF(void) -start_pass_dcolor (j_decompress_ptr cinfo) -{ - /* no work needed */ -} - - -/* - * Module initialization routine for output colorspace conversion. - */ - -GLOBAL(void) -jinit_color_deconverter (j_decompress_ptr cinfo) -{ - my_cconvert_ptr cconvert; - int ci; - - cconvert = (my_cconvert_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_color_deconverter)); - cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; - cconvert->pub.start_pass = start_pass_dcolor; - - /* Make sure num_components agrees with jpeg_color_space */ - switch (cinfo->jpeg_color_space) { - case JCS_GRAYSCALE: - if (cinfo->num_components != 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_RGB: - case JCS_YCbCr: - if (cinfo->num_components != 3) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - case JCS_CMYK: - case JCS_YCCK: - if (cinfo->num_components != 4) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - - default: /* JCS_UNKNOWN can be anything */ - if (cinfo->num_components < 1) - ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); - break; - } - - /* Set out_color_components and conversion method based on requested space. - * Also clear the component_needed flags for any unused components, - * so that earlier pipeline stages can avoid useless computation. - */ - - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - if (cinfo->jpeg_color_space == JCS_GRAYSCALE || - cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = grayscale_convert; - /* For color->grayscale conversion, only the Y (0) component is needed */ - for (ci = 1; ci < cinfo->num_components; ci++) - cinfo->comp_info[ci].component_needed = FALSE; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB: - cinfo->out_color_components = RGB_PIXELSIZE; - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgb_convert; -#ifndef ANDROID_JPEG_USE_VENUM - build_ycc_rgb_table(cinfo); -#endif - } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { - cconvert->pub.color_convert = gray_rgb_convert; - } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - -#ifdef ANDROID_RGB - case JCS_RGBA_8888: - cinfo->out_color_components = 4; - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgba_8888_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { - cconvert->pub.color_convert = gray_rgba_8888_convert; - } else if (cinfo->jpeg_color_space == JCS_RGB) { - cconvert->pub.color_convert = rgb_rgba_8888_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - case JCS_RGB_565: - cinfo->out_color_components = RGB_PIXELSIZE; - if (cinfo->dither_mode == JDITHER_NONE) { - if (cinfo->jpeg_color_space == JCS_YCbCr) { - cconvert->pub.color_convert = ycc_rgb_565_convert; -#if !defined(ANDROID_JPEG_USE_VENUM) - build_ycc_rgb_table(cinfo); -#endif /* ANDROID_JPEG_USE_VENUM */ - } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { - cconvert->pub.color_convert = gray_rgb_565_convert; - } else if (cinfo->jpeg_color_space == JCS_RGB) { - cconvert->pub.color_convert = rgb_rgb_565_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - } else { - /* only ordered dither is supported */ - if (cinfo->jpeg_color_space == JCS_YCbCr) { -#if defined(ANDROID_JPEG_USE_VENUM) - /* Use VeNum routine even if dithering option is selected. */ - cconvert->pub.color_convert = ycc_rgb_565_convert; -#else - cconvert->pub.color_convert = ycc_rgb_565D_convert; - build_ycc_rgb_table(cinfo); -#endif /* ANDROID_JPEG_USE_VENUM */ - } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { - cconvert->pub.color_convert = gray_rgb_565D_convert; - } else if (cinfo->jpeg_color_space == JCS_RGB) { - cconvert->pub.color_convert = rgb_rgb_565D_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - } - break; -#endif - - case JCS_CMYK: - cinfo->out_color_components = 4; - if (cinfo->jpeg_color_space == JCS_YCCK) { - cconvert->pub.color_convert = ycck_cmyk_convert; - build_ycc_rgb_table(cinfo); - } else if (cinfo->jpeg_color_space == JCS_CMYK) { - cconvert->pub.color_convert = null_convert; - } else - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - - default: - /* Permit null conversion to same output space */ - if (cinfo->out_color_space == cinfo->jpeg_color_space) { - cinfo->out_color_components = cinfo->num_components; - cconvert->pub.color_convert = null_convert; - } else /* unsupported non-null conversion */ - ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); - break; - } - - if (cinfo->quantize_colors) - cinfo->output_components = 1; /* single colormapped output component */ - else - cinfo->output_components = cinfo->out_color_components; -} diff --git a/libjpegtwrp/jdct.h b/libjpegtwrp/jdct.h deleted file mode 100644 index 04192a266..000000000 --- a/libjpegtwrp/jdct.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * jdct.h - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file contains common declarations for the forward and - * inverse DCT modules. These declarations are private to the DCT managers - * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. - * The individual DCT algorithms are kept in separate files to ease - * machine-dependent tuning (e.g., assembly coding). - */ - - -/* - * A forward DCT routine is given a pointer to a work area of type DCTELEM[]; - * the DCT is to be performed in-place in that buffer. Type DCTELEM is int - * for 8-bit samples, INT32 for 12-bit samples. (NOTE: Floating-point DCT - * implementations use an array of type FAST_FLOAT, instead.) - * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE). - * The DCT outputs are returned scaled up by a factor of 8; they therefore - * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This - * convention improves accuracy in integer implementations and saves some - * work in floating-point ones. - * Quantization of the output coefficients is done by jcdctmgr.c. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef int DCTELEM; /* 16 or 32 bits is fine */ -#else -typedef INT32 DCTELEM; /* must have 32 bits */ -#endif - -typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data)); -typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data)); - - -/* - * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer - * to an output sample array. The routine must dequantize the input data as - * well as perform the IDCT; for dequantization, it uses the multiplier table - * pointed to by compptr->dct_table. The output data is to be placed into the - * sample array starting at a specified column. (Any row offset needed will - * be applied to the array pointer before it is passed to the IDCT code.) - * Note that the number of samples emitted by the IDCT routine is - * DCT_scaled_size * DCT_scaled_size. - */ - -/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ - -/* - * Each IDCT routine has its own ideas about the best dct_table element type. - */ - -typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ -#if BITS_IN_JSAMPLE == 8 -typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ -#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ -#else -typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ -#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ -#endif -typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ - - -/* - * Each IDCT routine is responsible for range-limiting its results and - * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could - * be quite far out of range if the input data is corrupt, so a bulletproof - * range-limiting step is required. We use a mask-and-table-lookup method - * to do the combined operations quickly. See the comments with - * prepare_range_limit_table (in jdmaster.c) for more info. - */ - -#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) - -#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_fdct_islow jFDislow -#define jpeg_fdct_ifast jFDifast -#define jpeg_fdct_float jFDfloat -#define jpeg_idct_islow jRDislow -#define jpeg_idct_ifast jRDifast -#define jpeg_idct_float jRDfloat -#define jpeg_idct_4x4 jRD4x4 -#define jpeg_idct_2x2 jRD2x2 -#define jpeg_idct_1x1 jRD1x1 -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - -/* Extern declarations for the forward and inverse DCT routines. */ - -EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data)); -EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data)); -EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data)); - -EXTERN(void) jpeg_idct_islow - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_ifast - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_float - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_4x4 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_2x2 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); -EXTERN(void) jpeg_idct_1x1 - JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); - - -/* - * Macros for handling fixed-point arithmetic; these are used by many - * but not all of the DCT/IDCT modules. - * - * All values are expected to be of type INT32. - * Fractional constants are scaled left by CONST_BITS bits. - * CONST_BITS is defined within each module using these macros, - * and may differ from one module to the next. - */ - -#define ONE ((INT32) 1) -#define CONST_SCALE (ONE << CONST_BITS) - -/* Convert a positive real constant to an integer scaled by CONST_SCALE. - * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, - * thus causing a lot of useless floating-point operations at run time. - */ - -#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) - -/* Descale and correctly round an INT32 value that's scaled by N bits. - * We assume RIGHT_SHIFT rounds towards minus infinity, so adding - * the fudge factor is correct for either sign of X. - */ - -#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * This macro is used only when the two inputs will actually be no more than - * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a - * full 32x32 multiply. This provides a useful speedup on many machines. - * Unfortunately there is no way to specify a 16x16->32 multiply portably - * in C, but some C compilers will do the right thing if you provide the - * correct combination of casts. - */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) -#endif -#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ -#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) -#endif - -#ifndef MULTIPLY16C16 /* default definition */ -#define MULTIPLY16C16(var,const) ((var) * (const)) -#endif - -/* Same except both inputs are variables. */ - -#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ -#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) -#endif - -#ifndef MULTIPLY16V16 /* default definition */ -#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) -#endif diff --git a/libjpegtwrp/jddctmgr.c b/libjpegtwrp/jddctmgr.c deleted file mode 100644 index 674bfa75f..000000000 --- a/libjpegtwrp/jddctmgr.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * jddctmgr.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the inverse-DCT management logic. - * This code selects a particular IDCT implementation to be used, - * and it performs related housekeeping chores. No code in this file - * is executed per IDCT step, only during output pass setup. - * - * Note that the IDCT routines are responsible for performing coefficient - * dequantization as well as the IDCT proper. This module sets up the - * dequantization multiplier table needed by the IDCT routine. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef ANDROID_ARMV6_IDCT - #undef ANDROID_ARMV6_IDCT - #ifdef __arm__ - #include - #if __ARM_ARCH__ >= 6 - #define ANDROID_ARMV6_IDCT - #else - #warning "ANDROID_ARMV6_IDCT is disabled" - #endif - #endif -#endif - -#ifdef ANDROID_ARMV6_IDCT - -/* Intentionally declare the prototype with arguments of primitive types instead - * of type-defined ones. This will at least generate some warnings if jmorecfg.h - * is changed and becomes incompatible with the assembly code. - */ -extern void armv6_idct(short *coefs, int *quans, unsigned char **rows, int col); - -void jpeg_idct_armv6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - IFAST_MULT_TYPE *dct_table = (IFAST_MULT_TYPE *)compptr->dct_table; - armv6_idct(coef_block, dct_table, output_buf, output_col); -} - -#endif - -/* - * The decompressor input side (jdinput.c) saves away the appropriate - * quantization table for each component at the start of the first scan - * involving that component. (This is necessary in order to correctly - * decode files that reuse Q-table slots.) - * When we are ready to make an output pass, the saved Q-table is converted - * to a multiplier table that will actually be used by the IDCT routine. - * The multiplier table contents are IDCT-method-dependent. To support - * application changes in IDCT method between scans, we can remake the - * multiplier tables if necessary. - * In buffered-image mode, the first output pass may occur before any data - * has been seen for some components, and thus before their Q-tables have - * been saved away. To handle this case, multiplier tables are preset - * to zeroes; the result of the IDCT will be a neutral gray level. - */ - - -/* Private subobject for this module */ - -typedef struct { - struct jpeg_inverse_dct pub; /* public fields */ - - /* This array contains the IDCT method code that each multiplier table - * is currently set up for, or -1 if it's not yet set up. - * The actual multiplier tables are pointed to by dct_table in the - * per-component comp_info structures. - */ - int cur_method[MAX_COMPONENTS]; -} my_idct_controller; - -typedef my_idct_controller * my_idct_ptr; - - -/* Allocated multiplier tables: big enough for any supported variant */ - -typedef union { - ISLOW_MULT_TYPE islow_array[DCTSIZE2]; -#ifdef DCT_IFAST_SUPPORTED - IFAST_MULT_TYPE ifast_array[DCTSIZE2]; -#endif -#ifdef DCT_FLOAT_SUPPORTED - FLOAT_MULT_TYPE float_array[DCTSIZE2]; -#endif -} multiplier_table; - - -/* The current scaled-IDCT routines require ISLOW-style multiplier tables, - * so be sure to compile that code if either ISLOW or SCALING is requested. - */ -#ifdef DCT_ISLOW_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#else -#ifdef IDCT_SCALING_SUPPORTED -#define PROVIDE_ISLOW_TABLES -#endif -#endif - - -/* - * Prepare for an output pass. - * Here we select the proper IDCT routine for each component and build - * a matching multiplier table. - */ - -METHODDEF(void) -start_pass (j_decompress_ptr cinfo) -{ - my_idct_ptr idct = (my_idct_ptr) cinfo->idct; - int ci, i; - jpeg_component_info *compptr; - int method = 0; - inverse_DCT_method_ptr method_ptr = NULL; - JQUANT_TBL * qtbl; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Select the proper IDCT routine for this component's scaling */ - switch (compptr->DCT_scaled_size) { -#ifdef IDCT_SCALING_SUPPORTED - case 1: - method_ptr = jpeg_idct_1x1; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; - case 2: - method_ptr = jpeg_idct_2x2; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; - case 4: - method_ptr = jpeg_idct_4x4; - method = JDCT_ISLOW; /* jidctred uses islow-style table */ - break; -#endif - case DCTSIZE: - switch (cinfo->dct_method) { -#ifdef ANDROID_ARMV6_IDCT - case JDCT_ISLOW: - case JDCT_IFAST: - method_ptr = jpeg_idct_armv6; - method = JDCT_IFAST; - break; -#else /* ANDROID_ARMV6_IDCT */ -#ifdef DCT_ISLOW_SUPPORTED - case JDCT_ISLOW: - method_ptr = jpeg_idct_islow; - method = JDCT_ISLOW; - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: -#ifdef ANDROID_JPEG_USE_VENUM - /* Use VeNum implementation of jpeg_idct_islow even if fast DCT option is selected */ - method_ptr = jpeg_idct_islow; - method = JDCT_ISLOW; -#else - method_ptr = jpeg_idct_ifast; - method = JDCT_IFAST; -#endif /* ANDROID_JPEG_USE_VENUM */ - break; -#endif -#endif /* ANDROID_ARMV6_IDCT */ -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - method_ptr = jpeg_idct_float; - method = JDCT_FLOAT; - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - break; - default: - ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); - break; - } - idct->pub.inverse_DCT[ci] = method_ptr; - /* Create multiplier table from quant table. - * However, we can skip this if the component is uninteresting - * or if we already built the table. Also, if no quant table - * has yet been saved for the component, we leave the - * multiplier table all-zero; we'll be reading zeroes from the - * coefficient controller's buffer anyway. - */ - if (! compptr->component_needed || idct->cur_method[ci] == method) - continue; - qtbl = compptr->quant_table; - if (qtbl == NULL) /* happens if no data yet for component */ - continue; - idct->cur_method[ci] = method; - switch (method) { -#ifdef PROVIDE_ISLOW_TABLES - case JDCT_ISLOW: - { - /* For LL&M IDCT method, multipliers are equal to raw quantization - * coefficients, but are stored as ints to ensure access efficiency. - */ - ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; - for (i = 0; i < DCTSIZE2; i++) { - ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; - } - } - break; -#endif -#ifdef DCT_IFAST_SUPPORTED - case JDCT_IFAST: - { - /* For AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - * For integer operation, the multiplier table is to be scaled by - * IFAST_SCALE_BITS. - */ - IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; -#ifdef ANDROID_ARMV6_IDCT - /* Precomputed values scaled up by 15 bits. */ - static const unsigned short scales[DCTSIZE2] = { - 32768, 45451, 42813, 38531, 32768, 25746, 17734, 9041, - 45451, 63042, 59384, 53444, 45451, 35710, 24598, 12540, - 42813, 59384, 55938, 50343, 42813, 33638, 23170, 11812, - 38531, 53444, 50343, 45308, 38531, 30274, 20853, 10631, - 32768, 45451, 42813, 38531, 32768, 25746, 17734, 9041, - 25746, 35710, 33638, 30274, 25746, 20228, 13933, 7103, - 17734, 24598, 23170, 20853, 17734, 13933, 9598, 4893, - 9041, 12540, 11812, 10631, 9041, 7103, 4893, 2494, - }; - /* Inverse map of [7, 5, 1, 3, 0, 2, 4, 6]. */ - static const char orders[DCTSIZE] = {4, 2, 5, 3, 6, 1, 7, 0}; - /* Reorder the columns after transposing. */ - for (i = 0; i < DCTSIZE2; ++i) { - int j = ((i & 7) << 3) + orders[i >> 3]; - ifmtbl[j] = (qtbl->quantval[i] * scales[i] + 2) >> 2; - } -#else /* ANDROID_ARMV6_IDCT */ - -#define CONST_BITS 14 - static const INT16 aanscales[DCTSIZE2] = { - /* precomputed values scaled up by 14 bits */ - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, - 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, - 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, - 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, - 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, - 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, - 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 - }; - SHIFT_TEMPS - - for (i = 0; i < DCTSIZE2; i++) { - ifmtbl[i] = (IFAST_MULT_TYPE) - DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], - (INT32) aanscales[i]), - CONST_BITS-IFAST_SCALE_BITS); - } -#endif /* ANDROID_ARMV6_IDCT */ - } - break; -#endif -#ifdef DCT_FLOAT_SUPPORTED - case JDCT_FLOAT: - { - /* For float AA&N IDCT method, multipliers are equal to quantization - * coefficients scaled by scalefactor[row]*scalefactor[col], where - * scalefactor[0] = 1 - * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 - */ - FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; - int row, col; - static const double aanscalefactor[DCTSIZE] = { - 1.0, 1.387039845, 1.306562965, 1.175875602, - 1.0, 0.785694958, 0.541196100, 0.275899379 - }; - - i = 0; - for (row = 0; row < DCTSIZE; row++) { - for (col = 0; col < DCTSIZE; col++) { - fmtbl[i] = (FLOAT_MULT_TYPE) - ((double) qtbl->quantval[i] * - aanscalefactor[row] * aanscalefactor[col]); - i++; - } - } - } - break; -#endif - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } - } -} - - -/* - * Initialize IDCT manager. - */ - -GLOBAL(void) -jinit_inverse_dct (j_decompress_ptr cinfo) -{ - my_idct_ptr idct; - int ci; - jpeg_component_info *compptr; - - idct = (my_idct_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_idct_controller)); - cinfo->idct = (struct jpeg_inverse_dct *) idct; - idct->pub.start_pass = start_pass; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Allocate and pre-zero a multiplier table for each component */ - compptr->dct_table = - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(multiplier_table)); - MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); - /* Mark multiplier table not yet set up for any method */ - idct->cur_method[ci] = -1; - } -} diff --git a/libjpegtwrp/jdhuff.c b/libjpegtwrp/jdhuff.c deleted file mode 100644 index bc5d4fdd2..000000000 --- a/libjpegtwrp/jdhuff.c +++ /dev/null @@ -1,894 +0,0 @@ -/* - * jdhuff.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdphuff.c */ - -LOCAL(boolean) process_restart (j_decompress_ptr cinfo); - - -/* - * Expanded entropy decoder object for Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; - d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; - - /* Precalculated info set up by start_pass for use in decode_mcu: */ - - /* Pointers to derived tables to be used for each block within an MCU */ - d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; - d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; - /* Whether we care about the DC and AC coefficient values for each block */ - boolean dc_needed[D_MAX_BLOCKS_IN_MCU]; - boolean ac_needed[D_MAX_BLOCKS_IN_MCU]; -} huff_entropy_decoder; - -typedef huff_entropy_decoder * huff_entropy_ptr; - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF(void) -start_pass_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci, blkn, dctbl, actbl; - jpeg_component_info * compptr; - - /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. - * This ought to be an error condition, but we make it a warning because - * there are some baseline files out there with all zeroes in these bytes. - */ - if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 || - cinfo->Ah != 0 || cinfo->Al != 0) - WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - dctbl = compptr->dc_tbl_no; - actbl = compptr->ac_tbl_no; - /* Compute derived values for Huffman tables */ - /* We may do this more than once for a table, but it's not expensive */ - jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl, - & entropy->dc_derived_tbls[dctbl]); - jpeg_make_d_derived_tbl(cinfo, FALSE, actbl, - & entropy->ac_derived_tbls[actbl]); - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Precalculate decoding info for each block in an MCU of this scan */ - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - /* Precalculate which table to use for each block */ - entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; - entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; - /* Decide whether we really care about the coefficient values */ - if (compptr->component_needed) { - entropy->dc_needed[blkn] = TRUE; - /* we don't need the ACs if producing a 1/8th-size image */ - entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1); - } else { - entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE; - } - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->pub.insufficient_data = FALSE; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Compute the derived values for a Huffman table. - * This routine also performs some validation checks on the table. - * - * Note this is also used by jdphuff.c. - */ - -GLOBAL(void) -jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, - d_derived_tbl ** pdtbl) -{ - JHUFF_TBL *htbl; - d_derived_tbl *dtbl; - int p, i, l, si, numsymbols; - int lookbits, ctr; - char huffsize[257]; - unsigned int huffcode[257]; - unsigned int code; - - /* Note that huffsize[] and huffcode[] are filled in code-length order, - * paralleling the order of the symbols themselves in htbl->huffval[]. - */ - - /* Find the input Huffman table */ - if (tblno < 0 || tblno >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - htbl = - isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; - if (htbl == NULL) - ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); - - /* Allocate a workspace if we haven't already done so. */ - if (*pdtbl == NULL) - *pdtbl = (d_derived_tbl *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(d_derived_tbl)); - dtbl = *pdtbl; - dtbl->pub = htbl; /* fill in back link */ - - /* Figure C.1: make table of Huffman code length for each symbol */ - - p = 0; - for (l = 1; l <= 16; l++) { - i = (int) htbl->bits[l]; - if (i < 0 || p + i > 256) /* protect against table overrun */ - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - while (i--) - huffsize[p++] = (char) l; - } - huffsize[p] = 0; - numsymbols = p; - - /* Figure C.2: generate the codes themselves */ - /* We also validate that the counts represent a legal Huffman code tree. */ - - code = 0; - si = huffsize[0]; - p = 0; - while (huffsize[p]) { - while (((int) huffsize[p]) == si) { - huffcode[p++] = code; - code++; - } - /* code is now 1 more than the last code used for codelength si; but - * it must still fit in si bits, since no code is allowed to be all ones. - */ - if (((INT32) code) >= (((INT32) 1) << si)) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - code <<= 1; - si++; - } - - /* Figure F.15: generate decoding tables for bit-sequential decoding */ - - p = 0; - for (l = 1; l <= 16; l++) { - if (htbl->bits[l]) { - /* valoffset[l] = huffval[] index of 1st symbol of code length l, - * minus the minimum code of length l - */ - dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; - p += htbl->bits[l]; - dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ - } else { - dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ - } - } - dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ - - /* Compute lookahead tables to speed up decoding. - * First we set all the table entries to 0, indicating "too long"; - * then we iterate through the Huffman codes that are short enough and - * fill in all the entries that correspond to bit sequences starting - * with that code. - */ - - MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); - - p = 0; - for (l = 1; l <= HUFF_LOOKAHEAD; l++) { - for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { - /* l = current code's length, p = its index in huffcode[] & huffval[]. */ - /* Generate left-justified code followed by all possible bit sequences */ - lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); - for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { - dtbl->look_nbits[lookbits] = l; - dtbl->look_sym[lookbits] = htbl->huffval[p]; - lookbits++; - } - } - } - - /* Validate symbols as being reasonable. - * For AC tables, we make no check, but accept all byte values 0..255. - * For DC tables, we require the symbols to be in range 0..15. - * (Tighter bounds could be applied depending on the data depth and mode, - * but this is sufficient to ensure safe decoding.) - */ - if (isDC) { - for (i = 0; i < numsymbols; i++) { - int sym = htbl->huffval[i]; - if (sym < 0 || sym > 15) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - } - } -} - - -/* - * Out-of-line code for bit fetching (shared with jdphuff.c). - * See jdhuff.h for info about usage. - * Note: current values of get_buffer and bits_left are passed as parameters, - * but are returned in the corresponding fields of the state struct. - * - * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width - * of get_buffer to be used. (On machines with wider words, an even larger - * buffer could be used.) However, on some machines 32-bit shifts are - * quite slow and take time proportional to the number of places shifted. - * (This is true with most PC compilers, for instance.) In this case it may - * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the - * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. - */ - -#ifdef SLOW_SHIFT_32 -#define MIN_GET_BITS 15 /* minimum allowable value */ -#else -#define MIN_GET_BITS (BIT_BUF_SIZE-7) -#endif - - -GLOBAL(boolean) -jpeg_fill_bit_buffer (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - int nbits) -/* Load up the bit buffer to a depth of at least nbits */ -{ - /* Copy heavily used state fields into locals (hopefully registers) */ - register const JOCTET * next_input_byte = state->next_input_byte; - register size_t bytes_in_buffer = state->bytes_in_buffer; - j_decompress_ptr cinfo = state->cinfo; - - /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ - /* (It is assumed that no request will be for more than that many bits.) */ - /* We fail to do so only if we hit a marker or are forced to suspend. */ - - if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ - while (bits_left < MIN_GET_BITS) { - register int c; - - /* Attempt to read a byte */ - if (bytes_in_buffer == 0) { - if (! (*cinfo->src->fill_input_buffer) (cinfo)) - return FALSE; - next_input_byte = cinfo->src->next_input_byte; - bytes_in_buffer = cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - - /* If it's 0xFF, check and discard stuffed zero byte */ - if (c == 0xFF) { - /* Loop here to discard any padding FF's on terminating marker, - * so that we can save a valid unread_marker value. NOTE: we will - * accept multiple FF's followed by a 0 as meaning a single FF data - * byte. This data pattern is not valid according to the standard. - */ - do { - if (bytes_in_buffer == 0) { - if (! (*cinfo->src->fill_input_buffer) (cinfo)) - return FALSE; - next_input_byte = cinfo->src->next_input_byte; - bytes_in_buffer = cinfo->src->bytes_in_buffer; - } - bytes_in_buffer--; - c = GETJOCTET(*next_input_byte++); - } while (c == 0xFF); - - if (c == 0) { - /* Found FF/00, which represents an FF data byte */ - c = 0xFF; - } else { - /* Oops, it's actually a marker indicating end of compressed data. - * Save the marker code for later use. - * Fine point: it might appear that we should save the marker into - * bitread working state, not straight into permanent state. But - * once we have hit a marker, we cannot need to suspend within the - * current MCU, because we will read no more bytes from the data - * source. So it is OK to update permanent state right away. - */ - cinfo->unread_marker = c; - /* See if we need to insert some fake zero bits. */ - goto no_more_bytes; - } - } - - /* OK, load c into get_buffer */ - get_buffer = (get_buffer << 8) | c; - bits_left += 8; - } /* end while */ - } else { - no_more_bytes: - /* We get here if we've read the marker that terminates the compressed - * data segment. There should be enough bits in the buffer register - * to satisfy the request; if so, no problem. - */ - if (nbits > bits_left) { - /* Uh-oh. Report corrupted data to user and stuff zeroes into - * the data stream, so that we can produce some kind of image. - * We use a nonvolatile flag to ensure that only one warning message - * appears per data segment. - */ - if (! cinfo->entropy->insufficient_data) { - WARNMS(cinfo, JWRN_HIT_MARKER); - cinfo->entropy->insufficient_data = TRUE; - } - /* Fill the buffer with zero bits */ - get_buffer <<= MIN_GET_BITS - bits_left; - bits_left = MIN_GET_BITS; - } - } - - /* Unload the local registers */ - state->next_input_byte = next_input_byte; - state->bytes_in_buffer = bytes_in_buffer; - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - return TRUE; -} - - -/* - * Out-of-line code for Huffman code decoding. - * See jdhuff.h for info about usage. - */ - -GLOBAL(int) -jpeg_huff_decode (bitread_working_state * state, - register bit_buf_type get_buffer, register int bits_left, - d_derived_tbl * htbl, int min_bits) -{ - register int l = min_bits; - register INT32 code; - - /* HUFF_DECODE has determined that the code is at least min_bits */ - /* bits long, so fetch that many bits in one swoop. */ - - CHECK_BIT_BUFFER(*state, l, return -1); - code = GET_BITS(l); - - /* Collect the rest of the Huffman code one bit at a time. */ - /* This is per Figure F.16 in the JPEG spec. */ - - while (code > htbl->maxcode[l]) { - code <<= 1; - CHECK_BIT_BUFFER(*state, 1, return -1); - code |= GET_BITS(1); - l++; - } - - /* Unload the local registers */ - state->get_buffer = get_buffer; - state->bits_left = bits_left; - - /* With garbage input we may reach the sentinel value l = 17. */ - - if (l > 16) { - WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); - return 0; /* fake a zero as the safest result */ - } - - return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL(boolean) -process_restart (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Reset out-of-data flag, unless read_restart_marker left us smack up - * against a marker. In that case we will end up treating the next data - * segment as empty, and we can avoid producing bogus output pixels by - * leaving the flag set. - */ - if (cinfo->unread_marker == 0) - entropy->pub.insufficient_data = FALSE; - - return TRUE; -} - -/* - * Save the current Huffman deocde position and the DC coefficients - * for each component into bitstream_offset and dc_info[], respectively. - */ -METHODDEF(void) -get_huffman_decoder_configuration(j_decompress_ptr cinfo, - huffman_offset_data *offset) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - short int *dc_info = offset->prev_dc; - int i; - jpeg_get_huffman_decoder_configuration(cinfo, offset); - for (i = 0; i < cinfo->comps_in_scan; i++) { - dc_info[i] = entropy->saved.last_dc_val[i]; - } -} - -/* - * Save the current Huffman decoder position and the bit buffer - * into bitstream_offset and get_buffer, respectively. - */ -GLOBAL(void) -jpeg_get_huffman_decoder_configuration(j_decompress_ptr cinfo, - huffman_offset_data *offset) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - - if (cinfo->restart_interval) { - // We are at the end of a data segment - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return; - } - - // Save restarts_to_go and next_restart_num - offset->restarts_to_go = (unsigned short) entropy->restarts_to_go; - offset->next_restart_num = cinfo->marker->next_restart_num; - - offset->bitstream_offset = - (jget_input_stream_position(cinfo) << LOG_TWO_BIT_BUF_SIZE) - + entropy->bitstate.bits_left; - - offset->get_buffer = entropy->bitstate.get_buffer; -} - -/* - * Configure the Huffman decoder to decode the image - * starting from the bitstream position recorded in offset. - */ -METHODDEF(void) -configure_huffman_decoder(j_decompress_ptr cinfo, huffman_offset_data offset) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - short int *dc_info = offset.prev_dc; - int i; - jpeg_configure_huffman_decoder(cinfo, offset); - for (i = 0; i < cinfo->comps_in_scan; i++) { - entropy->saved.last_dc_val[i] = dc_info[i]; - } -} - -/* - * Configure the Huffman decoder reader position and bit buffer. - */ -GLOBAL(void) -jpeg_configure_huffman_decoder(j_decompress_ptr cinfo, - huffman_offset_data offset) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - - // Restore restarts_to_go and next_restart_num - cinfo->unread_marker = 0; - entropy->restarts_to_go = offset.restarts_to_go; - cinfo->marker->next_restart_num = offset.next_restart_num; - - unsigned int bitstream_offset = offset.bitstream_offset; - int blkn, i; - - unsigned int byte_offset = bitstream_offset >> LOG_TWO_BIT_BUF_SIZE; - unsigned int bit_in_bit_buffer = - bitstream_offset & ((1 << LOG_TWO_BIT_BUF_SIZE) - 1); - - jset_input_stream_position_bit(cinfo, byte_offset, - bit_in_bit_buffer, offset.get_buffer); -} - -/* - * Decode and return one MCU's worth of Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER. - * (Wholesale zeroing is usually a little faster than retail...) - * - * Returns FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * this module, since we'll just re-assign them on the next call.) - */ - -METHODDEF(boolean) -decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn; - BITREAD_STATE_VARS; - savable_state state; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->pub.insufficient_data) { - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - JBLOCKROW block = MCU_data[blkn]; - d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn]; - d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn]; - register int s, k, r; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - if (entropy->dc_needed[blkn]) { - /* Convert DC difference to actual value, update last_dc_val */ - int ci = cinfo->MCU_membership[blkn]; - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */ - (*block)[0] = (JCOEF) s; - } - - if (entropy->ac_needed[blkn]) { - - /* Section F.2.2.2: decode the AC coefficients */ - /* Since zeroes are skipped, output area must be cleared beforehand */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label2); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Output coefficient in natural (dezigzagged) order. - * Note: the extra entries in jpeg_natural_order[] will save us - * if k >= DCTSIZE2, which could happen if the data is corrupted. - */ - (*block)[jpeg_natural_order[k]] = (JCOEF) s; - } else { - if (r != 15) - break; - k += 15; - } - } - - } else { - - /* Section F.2.2.2: decode the AC coefficients */ - /* In this path we just discard the values */ - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - - } - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - -/* - * Decode one MCU's worth of Huffman-compressed coefficients. - * The propose of this method is to calculate the - * data length of one MCU in Huffman-coded format. - * Therefore, all coefficients are discarded. - */ - -METHODDEF(boolean) -decode_mcu_discard_coef (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - int blkn; - BITREAD_STATE_VARS; - savable_state state; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - if (! entropy->pub.insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn]; - d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn]; - register int s, k, r; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* discard all coefficients */ - if (entropy->dc_needed[blkn]) { - /* Convert DC difference to actual value, update last_dc_val */ - int ci = cinfo->MCU_membership[blkn]; - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - } - for (k = 1; k < DCTSIZE2; k++) { - HUFF_DECODE(s, br_state, actbl, return FALSE, label3); - - r = s >> 4; - s &= 15; - - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - DROP_BITS(s); - } else { - if (r != 15) - break; - k += 15; - } - } - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * Module initialization routine for Huffman entropy decoding. - */ - -GLOBAL(void) -jinit_huff_decoder (j_decompress_ptr cinfo) -{ - huff_entropy_ptr entropy; - int i; - - entropy = (huff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(huff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_huff_decoder; - entropy->pub.decode_mcu = decode_mcu; - entropy->pub.decode_mcu_discard_coef = decode_mcu_discard_coef; - entropy->pub.configure_huffman_decoder = configure_huffman_decoder; - entropy->pub.get_huffman_decoder_configuration = - get_huffman_decoder_configuration; - entropy->pub.index = NULL; - - /* Mark tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; - } -} - -/* - * Call after jpeg_read_header - */ -GLOBAL(void) -jpeg_create_huffman_index(j_decompress_ptr cinfo, huffman_index *index) -{ - int i, s; - index->scan_count = 1; - index->total_iMCU_rows = cinfo->total_iMCU_rows; - index->scan = (huffman_scan_header*)malloc(index->scan_count - * sizeof(huffman_scan_header)); - index->scan[0].offset = (huffman_offset_data**)malloc(cinfo->total_iMCU_rows - * sizeof(huffman_offset_data*)); - index->scan[0].prev_MCU_offset.bitstream_offset = 0; - index->MCU_sample_size = DEFAULT_MCU_SAMPLE_SIZE; - - index->mem_used = sizeof(huffman_scan_header) - + cinfo->total_iMCU_rows * sizeof(huffman_offset_data*); -} - -GLOBAL(void) -jpeg_destroy_huffman_index(huffman_index *index) -{ - int i, j; - for (i = 0; i < index->scan_count; i++) { - for(j = 0; j < index->total_iMCU_rows; j++) { - free(index->scan[i].offset[j]); - } - free(index->scan[i].offset); - } - free(index->scan); -} - -/* - * Set the reader byte position to offset - */ -GLOBAL(void) -jset_input_stream_position(j_decompress_ptr cinfo, int offset) -{ - if (cinfo->src->seek_input_data) { - cinfo->src->seek_input_data(cinfo, offset); - } else { - cinfo->src->bytes_in_buffer = cinfo->src->current_offset - offset; - cinfo->src->next_input_byte = cinfo->src->start_input_byte + offset; - } -} - -/* - * Set the reader byte position to offset and bit position to bit_left - * with bit buffer set to buf. - */ -GLOBAL(void) -jset_input_stream_position_bit(j_decompress_ptr cinfo, - int byte_offset, int bit_left, INT32 buf) -{ - huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; - - entropy->bitstate.bits_left = bit_left; - entropy->bitstate.get_buffer = buf; - - jset_input_stream_position(cinfo, byte_offset); -} - -/* - * Get the current reader byte position. - */ -GLOBAL(int) -jget_input_stream_position(j_decompress_ptr cinfo) -{ - return cinfo->src->current_offset - cinfo->src->bytes_in_buffer; -} diff --git a/libjpegtwrp/jdhuff.h b/libjpegtwrp/jdhuff.h deleted file mode 100644 index 5760a134e..000000000 --- a/libjpegtwrp/jdhuff.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * jdhuff.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for Huffman entropy decoding routines - * that are shared between the sequential decoder (jdhuff.c) and the - * progressive decoder (jdphuff.c). No other modules need to see these. - */ - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_make_d_derived_tbl jMkDDerived -#define jpeg_fill_bit_buffer jFilBitBuf -#define jpeg_huff_decode jHufDecode -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Derived data constructed for each Huffman table */ - -#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ - -typedef struct { - /* Basic tables: (element [0] of each array is unused) */ - INT32 maxcode[18]; /* largest code of length k (-1 if none) */ - /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ - INT32 valoffset[17]; /* huffval[] offset for codes of length k */ - /* valoffset[k] = huffval[] index of 1st symbol of code length k, less - * the smallest code of length k; so given a code of length k, the - * corresponding symbol is huffval[code + valoffset[k]] - */ - - /* Link to public Huffman table (needed only in jpeg_huff_decode) */ - JHUFF_TBL *pub; - - /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of - * the input data stream. If the next Huffman code is no more - * than HUFF_LOOKAHEAD bits long, we can obtain its length and - * the corresponding symbol directly from these tables. - */ - int look_nbits[1< 32 bits on your machine, and shifting/masking longs is - * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE - * appropriately should be a win. Unfortunately we can't define the size - * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) - * because not all machines measure sizeof in 8-bit bytes. - */ - -typedef struct { /* Bitreading state saved across MCUs */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ -} bitread_perm_state; - -typedef struct { /* Bitreading working state within an MCU */ - /* Current data source location */ - /* We need a copy, rather than munging the original, in case of suspension */ - const JOCTET * next_input_byte; /* => next byte to read from source */ - size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ - /* Bit input buffer --- note these values are kept in register variables, - * not in this struct, inside the inner loops. - */ - bit_buf_type get_buffer; /* current bit-extraction buffer */ - int bits_left; /* # of unused bits in it */ - /* Pointer needed by jpeg_fill_bit_buffer. */ - j_decompress_ptr cinfo; /* back link to decompress master record */ -} bitread_working_state; - -/* Macros to declare and load/save bitread local variables. */ -#define BITREAD_STATE_VARS \ - register bit_buf_type get_buffer; \ - register int bits_left; \ - bitread_working_state br_state - -#define BITREAD_LOAD_STATE(cinfop,permstate) \ - br_state.cinfo = cinfop; \ - br_state.next_input_byte = cinfop->src->next_input_byte; \ - br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ - get_buffer = permstate.get_buffer; \ - bits_left = permstate.bits_left; - -#define BITREAD_SAVE_STATE(cinfop,permstate) \ - cinfop->src->next_input_byte = br_state.next_input_byte; \ - cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ - permstate.get_buffer = get_buffer; \ - permstate.bits_left = bits_left - -/* - * These macros provide the in-line portion of bit fetching. - * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer - * before using GET_BITS, PEEK_BITS, or DROP_BITS. - * The variables get_buffer and bits_left are assumed to be locals, - * but the state struct might not be (jpeg_huff_decode needs this). - * CHECK_BIT_BUFFER(state,n,action); - * Ensure there are N bits in get_buffer; if suspend, take action. - * val = GET_BITS(n); - * Fetch next N bits. - * val = PEEK_BITS(n); - * Fetch next N bits without removing them from the buffer. - * DROP_BITS(n); - * Discard next N bits. - * The value N should be a simple variable, not an expression, because it - * is evaluated multiple times. - */ - -#define CHECK_BIT_BUFFER(state,nbits,action) \ - { if (bits_left < (nbits)) { \ - if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ - { action; } \ - get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } - -#define GET_BITS(nbits) \ - (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1)) - -#define PEEK_BITS(nbits) \ - (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1)) - -#define DROP_BITS(nbits) \ - (bits_left -= (nbits)) - -/* Load up the bit buffer to a depth of at least nbits */ -EXTERN(boolean) jpeg_fill_bit_buffer - JPP((bitread_working_state * state, register bit_buf_type get_buffer, - register int bits_left, int nbits)); - - -/* - * Code for extracting next Huffman-coded symbol from input bit stream. - * Again, this is time-critical and we make the main paths be macros. - * - * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits - * without looping. Usually, more than 95% of the Huffman codes will be 8 - * or fewer bits long. The few overlength codes are handled with a loop, - * which need not be inline code. - * - * Notes about the HUFF_DECODE macro: - * 1. Near the end of the data segment, we may fail to get enough bits - * for a lookahead. In that case, we do it the hard way. - * 2. If the lookahead table contains no entry, the next code must be - * more than HUFF_LOOKAHEAD bits long. - * 3. jpeg_huff_decode returns -1 if forced to suspend. - */ - -#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ -{ register int nb, look; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - if (bits_left < HUFF_LOOKAHEAD) { \ - nb = 1; goto slowlabel; \ - } \ - } \ - look = PEEK_BITS(HUFF_LOOKAHEAD); \ - if ((nb = htbl->look_nbits[look]) != 0) { \ - DROP_BITS(nb); \ - result = htbl->look_sym[look]; \ - } else { \ - nb = HUFF_LOOKAHEAD+1; \ -slowlabel: \ - if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ - { failaction; } \ - get_buffer = state.get_buffer; bits_left = state.bits_left; \ - } \ -} - -/* Out-of-line case for Huffman code fetching */ -EXTERN(int) jpeg_huff_decode - JPP((bitread_working_state * state, register bit_buf_type get_buffer, - register int bits_left, d_derived_tbl * htbl, int min_bits)); diff --git a/libjpegtwrp/jdinput.c b/libjpegtwrp/jdinput.c deleted file mode 100644 index 4261c1a1c..000000000 --- a/libjpegtwrp/jdinput.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * jdinput.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains input control logic for the JPEG decompressor. - * These routines are concerned with controlling the decompressor's input - * processing (marker reading and coefficient decoding). The actual input - * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_input_controller pub; /* public fields */ - - boolean inheaders; /* TRUE until first SOS is reached */ -} my_input_controller; - -typedef my_input_controller * my_inputctl_ptr; - - -/* Forward declarations */ -METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); -METHODDEF(int) consume_markers_with_huffman_index JPP((j_decompress_ptr cinfo, - huffman_index *index, int current_scan)); - - -/* - * Routines to calculate various quantities related to the size of the image. - */ - -LOCAL(void) -initial_setup (j_decompress_ptr cinfo) -/* Called once, when first SOS marker is reached */ -{ - int ci; - jpeg_component_info *compptr; - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE. - * In the full decompressor, this will be overridden by jdmaster.c; - * but in the transcoder, jdmaster.c is not used, so we must do it here. - */ - cinfo->min_DCT_scaled_size = DCTSIZE; - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* downsampled_width and downsampled_height will also be overridden by - * jdmaster.c if we are doing full decompression. The transcoder library - * doesn't use these values, but the calling application might. - */ - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed, until color conversion says otherwise */ - compptr->component_needed = TRUE; - /* Mark no quantization table yet saved for component */ - compptr->quant_table = NULL; - } - - /* Compute number of fully interleaved MCU rows. */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - /* Decide whether file contains multiple scans */ - if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) - cinfo->inputctl->has_multiple_scans = TRUE; - else - cinfo->inputctl->has_multiple_scans = FALSE; - cinfo->original_image_width = cinfo->image_width; -} - -LOCAL(void) -per_scan_setup (j_decompress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = compptr->DCT_scaled_size; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; -#ifdef ANDROID_TILE_BASED_DECODE - if (cinfo->tile_decode) { - tmp = (int) (jdiv_round_up(cinfo->image_width, 8) - % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - } -#endif - - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } -} - -GLOBAL(void) -jpeg_decompress_per_scan_setup(j_decompress_ptr cinfo) -{ - per_scan_setup(cinfo); -} - - - -/* - * Save away a copy of the Q-table referenced by each component present - * in the current scan, unless already saved during a prior scan. - * - * In a multiple-scan JPEG file, the encoder could assign different components - * the same Q-table slot number, but change table definitions between scans - * so that each component uses a different Q-table. (The IJG encoder is not - * currently capable of doing this, but other encoders might.) Since we want - * to be able to dequantize all the components at the end of the file, this - * means that we have to save away the table actually used for each component. - * We do this by copying the table at the start of the first scan containing - * the component. - * The JPEG spec prohibits the encoder from changing the contents of a Q-table - * slot between scans of a component using that slot. If the encoder does so - * anyway, this decoder will simply use the Q-table values that were current - * at the start of the first scan for the component. - * - * The decompressor output side looks only at the saved quant tables, - * not at the current Q-table slots. - */ - -LOCAL(void) -latch_quant_tables (j_decompress_ptr cinfo) -{ - int ci, qtblno; - jpeg_component_info *compptr; - JQUANT_TBL * qtbl; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* No work if we already saved Q-table for this component */ - if (compptr->quant_table != NULL) - continue; - /* Make sure specified quantization table is present */ - qtblno = compptr->quant_tbl_no; - if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || - cinfo->quant_tbl_ptrs[qtblno] == NULL) - ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); - /* OK, save away the quantization table */ - qtbl = (JQUANT_TBL *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(JQUANT_TBL)); - MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); - compptr->quant_table = qtbl; - } -} - - -/* - * Initialize the input modules to read a scan of compressed data. - * The first call to this is done by jdmaster.c after initializing - * the entire decompressor (during jpeg_start_decompress). - * Subsequent calls come from consume_markers, below. - */ - -METHODDEF(void) -start_input_pass (j_decompress_ptr cinfo) -{ - per_scan_setup(cinfo); - latch_quant_tables(cinfo); - (*cinfo->entropy->start_pass) (cinfo); - (*cinfo->coef->start_input_pass) (cinfo); - cinfo->inputctl->consume_input = cinfo->coef->consume_data; - cinfo->inputctl->consume_input_build_huffman_index = - cinfo->coef->consume_data_build_huffman_index; -} - - -/* - * Finish up after inputting a compressed-data scan. - * This is called by the coefficient controller after it's read all - * the expected data of the scan. - */ - -METHODDEF(void) -finish_input_pass (j_decompress_ptr cinfo) -{ - cinfo->inputctl->consume_input = consume_markers; - cinfo->inputctl->consume_input_build_huffman_index = - consume_markers_with_huffman_index; -} - - -METHODDEF(int) -consume_markers_with_huffman_index (j_decompress_ptr cinfo, - huffman_index *index, int current_scan) -{ - return consume_markers(cinfo); -} -/* - * Read JPEG markers before, between, or after compressed-data scans. - * Change state as necessary when a new scan is reached. - * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - * - * The consume_input method pointer points either here or to the - * coefficient controller's consume_data routine, depending on whether - * we are reading a compressed data segment or inter-segment markers. - */ - -METHODDEF(int) -consume_markers (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - int val; - - if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ - return JPEG_REACHED_EOI; - - val = (*cinfo->marker->read_markers) (cinfo); - - switch (val) { - case JPEG_REACHED_SOS: /* Found SOS */ - if (inputctl->inheaders) { /* 1st SOS */ - initial_setup(cinfo); - inputctl->inheaders = FALSE; - /* Note: start_input_pass must be called by jdmaster.c - * before any more input can be consumed. jdapimin.c is - * responsible for enforcing this sequencing. - */ - } else { /* 2nd or later SOS marker */ - if (! inputctl->pub.has_multiple_scans) - ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ - start_input_pass(cinfo); - } - break; - case JPEG_REACHED_EOI: /* Found EOI */ - inputctl->pub.eoi_reached = TRUE; - if (inputctl->inheaders) { /* Tables-only datastream, apparently */ - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_NO_SOS); - } else { - /* Prevent infinite loop in coef ctlr's decompress_data routine - * if user set output_scan_number larger than number of scans. - */ - if (cinfo->output_scan_number > cinfo->input_scan_number) - cinfo->output_scan_number = cinfo->input_scan_number; - } - break; - case JPEG_SUSPENDED: - break; - } - - return val; -} - - -/* - * Reset state to begin a fresh datastream. - */ - -METHODDEF(void) -reset_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; - - inputctl->pub.consume_input = consume_markers; - inputctl->pub.consume_input_build_huffman_index = - consume_markers_with_huffman_index; - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; - /* Reset other modules */ - (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); - (*cinfo->marker->reset_marker_reader) (cinfo); - /* Reset progression state -- would be cleaner if entropy decoder did this */ - cinfo->coef_bits = NULL; -} - - -/* - * Initialize the input controller module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL(void) -jinit_input_controller (j_decompress_ptr cinfo) -{ - my_inputctl_ptr inputctl; - - /* Create subobject in permanent pool */ - inputctl = (my_inputctl_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_input_controller)); - cinfo->inputctl = (struct jpeg_input_controller *) inputctl; - /* Initialize method pointers */ - inputctl->pub.consume_input = consume_markers; - inputctl->pub.reset_input_controller = reset_input_controller; - inputctl->pub.start_input_pass = start_input_pass; - inputctl->pub.finish_input_pass = finish_input_pass; - - inputctl->pub.consume_markers = consume_markers_with_huffman_index; - inputctl->pub.consume_input_build_huffman_index = - consume_markers_with_huffman_index; - /* Initialize state: can't use reset_input_controller since we don't - * want to try to reset other modules yet. - */ - inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ - inputctl->pub.eoi_reached = FALSE; - inputctl->inheaders = TRUE; -} diff --git a/libjpegtwrp/jdmainct.c b/libjpegtwrp/jdmainct.c deleted file mode 100644 index c27217e55..000000000 --- a/libjpegtwrp/jdmainct.c +++ /dev/null @@ -1,512 +0,0 @@ -/* - * jdmainct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the main buffer controller for decompression. - * The main buffer lies between the JPEG decompressor proper and the - * post-processor; it holds downsampled data in the JPEG colorspace. - * - * Note that this code is bypassed in raw-data mode, since the application - * supplies the equivalent of the main buffer in that case. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * In the current system design, the main buffer need never be a full-image - * buffer; any full-height buffers will be found inside the coefficient or - * postprocessing controllers. Nonetheless, the main controller is not - * trivial. Its responsibility is to provide context rows for upsampling/ - * rescaling, and doing this in an efficient fashion is a bit tricky. - * - * Postprocessor input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. (We require DCT_scaled_size values to be - * chosen such that these numbers are integers. In practice DCT_scaled_size - * values will likely be powers of two, so we actually have the stronger - * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) - * Upsampling will typically produce max_v_samp_factor pixel rows from each - * row group (times any additional scale factor that the upsampler is - * applying). - * - * The coefficient controller will deliver data to us one iMCU row at a time; - * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or - * exactly min_DCT_scaled_size row groups. (This amount of data corresponds - * to one row of MCUs when the image is fully interleaved.) Note that the - * number of sample rows varies across components, but the number of row - * groups does not. Some garbage sample rows may be included in the last iMCU - * row at the bottom of the image. - * - * Depending on the vertical scaling algorithm used, the upsampler may need - * access to the sample row(s) above and below its current input row group. - * The upsampler is required to set need_context_rows TRUE at global selection - * time if so. When need_context_rows is FALSE, this controller can simply - * obtain one iMCU row at a time from the coefficient controller and dole it - * out as row groups to the postprocessor. - * - * When need_context_rows is TRUE, this controller guarantees that the buffer - * passed to postprocessing contains at least one row group's worth of samples - * above and below the row group(s) being processed. Note that the context - * rows "above" the first passed row group appear at negative row offsets in - * the passed buffer. At the top and bottom of the image, the required - * context rows are manufactured by duplicating the first or last real sample - * row; this avoids having special cases in the upsampling inner loops. - * - * The amount of context is fixed at one row group just because that's a - * convenient number for this controller to work with. The existing - * upsamplers really only need one sample row of context. An upsampler - * supporting arbitrary output rescaling might wish for more than one row - * group of context when shrinking the image; tough, we don't handle that. - * (This is justified by the assumption that downsizing will be handled mostly - * by adjusting the DCT_scaled_size values, so that the actual scale factor at - * the upsample step needn't be much less than one.) - * - * To provide the desired context, we have to retain the last two row groups - * of one iMCU row while reading in the next iMCU row. (The last row group - * can't be processed until we have another row group for its below-context, - * and so we have to save the next-to-last group too for its above-context.) - * We could do this most simply by copying data around in our buffer, but - * that'd be very slow. We can avoid copying any data by creating a rather - * strange pointer structure. Here's how it works. We allocate a workspace - * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number - * of row groups per iMCU row). We create two sets of redundant pointers to - * the workspace. Labeling the physical row groups 0 to M+1, the synthesized - * pointer lists look like this: - * M+1 M-1 - * master pointer --> 0 master pointer --> 0 - * 1 1 - * ... ... - * M-3 M-3 - * M-2 M - * M-1 M+1 - * M M-2 - * M+1 M-1 - * 0 0 - * We read alternate iMCU rows using each master pointer; thus the last two - * row groups of the previous iMCU row remain un-overwritten in the workspace. - * The pointer lists are set up so that the required context rows appear to - * be adjacent to the proper places when we pass the pointer lists to the - * upsampler. - * - * The above pictures describe the normal state of the pointer lists. - * At top and bottom of the image, we diddle the pointer lists to duplicate - * the first or last sample row as necessary (this is cheaper than copying - * sample rows around). - * - * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that - * situation each iMCU row provides only one row group so the buffering logic - * must be different (eg, we must read two iMCU rows before we can emit the - * first row group). For now, we simply do not support providing context - * rows when min_DCT_scaled_size is 1. That combination seems unlikely to - * be worth providing --- if someone wants a 1/8th-size preview, they probably - * want it quick and dirty, so a context-free upsampler is sufficient. - */ - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_main_controller pub; /* public fields */ - - /* Pointer to allocated workspace (M or M+2 row groups). */ - JSAMPARRAY buffer[MAX_COMPONENTS]; - - boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ - JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ - - /* Remaining fields are only used in the context case. */ - - /* These are the master pointers to the funny-order pointer lists. */ - JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ - - int whichptr; /* indicates which pointer set is now in use */ - int context_state; /* process_data state machine status */ - JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ - JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ -} my_main_controller; - -typedef my_main_controller * my_main_ptr; - -/* context_state values: */ -#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ -#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ -#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ - - -/* Forward declarations */ -METHODDEF(void) process_data_simple_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -METHODDEF(void) process_data_context_main - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF(void) process_data_crank_post - JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); -#endif - - -LOCAL(void) -alloc_funny_pointers (j_decompress_ptr cinfo) -/* Allocate space for the funny pointer lists. - * This is done only once, not once per pass. - */ -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - int ci, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - /* Get top-level space for component array pointers. - * We alloc both arrays with one call to save a few cycles. - */ - main_ptr->xbuffer[0] = (JSAMPIMAGE) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); - main_ptr->xbuffer[1] = main_ptr->xbuffer[0] + cinfo->num_components; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - /* Get space for pointer lists --- M+4 row groups in each list. - * We alloc both pointer lists with one call to save a few cycles. - */ - xbuf = (JSAMPARRAY) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); - xbuf += rgroup; /* want one row group at negative offsets */ - main_ptr->xbuffer[0][ci] = xbuf; - xbuf += rgroup * (M + 4); - main_ptr->xbuffer[1][ci] = xbuf; - } -} - - -LOCAL(void) -make_funny_pointers (j_decompress_ptr cinfo) -/* Create the funny pointer lists discussed in the comments above. - * The actual workspace is already allocated (in main->buffer), - * and the space for the pointer lists is allocated too. - * This routine just fills in the curiously ordered lists. - * This will be repeated at the beginning of each pass. - */ -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY buf, xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = main_ptr->xbuffer[0][ci]; - xbuf1 = main_ptr->xbuffer[1][ci]; - /* First copy the workspace pointers as-is */ - buf = main_ptr->buffer[ci]; - for (i = 0; i < rgroup * (M + 2); i++) { - xbuf0[i] = xbuf1[i] = buf[i]; - } - /* In the second list, put the last four row groups in swapped order */ - for (i = 0; i < rgroup * 2; i++) { - xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; - xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; - } - /* The wraparound pointers at top and bottom will be filled later - * (see set_wraparound_pointers, below). Initially we want the "above" - * pointers to duplicate the first actual data line. This only needs - * to happen in xbuffer[0]. - */ - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[0]; - } - } -} - - -LOCAL(void) -set_wraparound_pointers (j_decompress_ptr cinfo) -/* Set up the "wraparound" pointers at top and bottom of the pointer lists. - * This changes the pointer list state from top-of-image to the normal state. - */ -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - int ci, i, rgroup; - int M = cinfo->min_DCT_scaled_size; - jpeg_component_info *compptr; - JSAMPARRAY xbuf0, xbuf1; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - xbuf0 = main_ptr->xbuffer[0][ci]; - xbuf1 = main_ptr->xbuffer[1][ci]; - for (i = 0; i < rgroup; i++) { - xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; - xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; - xbuf0[rgroup*(M+2) + i] = xbuf0[i]; - xbuf1[rgroup*(M+2) + i] = xbuf1[i]; - } - } -} - - -LOCAL(void) -set_bottom_pointers (j_decompress_ptr cinfo) -/* Change the pointer lists to duplicate the last sample row at the bottom - * of the image. whichptr indicates which xbuffer holds the final iMCU row. - * Also sets rowgroups_avail to indicate number of nondummy row groups in row. - */ -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - int ci, i, rgroup, iMCUheight, rows_left; - jpeg_component_info *compptr; - JSAMPARRAY xbuf; - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Count sample rows in one iMCU row and in one row group */ - iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size; - rgroup = iMCUheight / cinfo->min_DCT_scaled_size; - /* Count nondummy sample rows remaining for this component */ - rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); - if (rows_left == 0) rows_left = iMCUheight; - /* Count nondummy row groups. Should get same answer for each component, - * so we need only do it once. - */ - if (ci == 0) { - main_ptr->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); - } - /* Duplicate the last real sample row rgroup*2 times; this pads out the - * last partial rowgroup and ensures at least one full rowgroup of context. - */ - xbuf = main_ptr->xbuffer[main_ptr->whichptr][ci]; - for (i = 0; i < rgroup * 2; i++) { - xbuf[rows_left + i] = xbuf[rows_left-1]; - } - } -} - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->upsample->need_context_rows) { - main_ptr->pub.process_data = process_data_context_main; - make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ - main_ptr->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ - main_ptr->context_state = CTX_PREPARE_FOR_IMCU; - main_ptr->iMCU_row_ctr = 0; - } else { - /* Simple case with no context needed */ - main_ptr->pub.process_data = process_data_simple_main; - } - main_ptr->buffer_full = FALSE; /* Mark buffer empty */ - main_ptr->rowgroup_ctr = 0; - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_CRANK_DEST: - /* For last pass of 2-pass quantization, just crank the postprocessor */ - main_ptr->pub.process_data = process_data_crank_post; - break; -#endif - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } -} - - -/* - * Process some data. - * This handles the simple case where no context is required. - */ - -METHODDEF(void) -process_data_simple_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - JDIMENSION rowgroups_avail; - - /* Read input data if we haven't filled the main buffer yet */ - if (! main_ptr->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, main_ptr->buffer)) - return; /* suspension forced, can do nothing more */ - main_ptr->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - } - - /* There are always min_DCT_scaled_size row groups in an iMCU row. */ - rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size; - /* Note: at the bottom of the image, we may pass extra garbage row groups - * to the postprocessor. The postprocessor has to check for bottom - * of image anyway (at row resolution), so no point in us doing it too. - */ - - /* Feed the postprocessor */ - (*cinfo->post->post_process_data) (cinfo, main_ptr->buffer, - &main_ptr->rowgroup_ctr, rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - - /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ - if (main_ptr->rowgroup_ctr >= rowgroups_avail) { - main_ptr->buffer_full = FALSE; - main_ptr->rowgroup_ctr = 0; - } -} - - -/* - * Process some data. - * This handles the case where context rows must be provided. - */ - -METHODDEF(void) -process_data_context_main (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_main_ptr main_ptr = (my_main_ptr) cinfo->main; - - /* Read input data if we haven't filled the main buffer yet */ - if (! main_ptr->buffer_full) { - if (! (*cinfo->coef->decompress_data) (cinfo, - main_ptr->xbuffer[main_ptr->whichptr])) - return; /* suspension forced, can do nothing more */ - main_ptr->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ - main_ptr->iMCU_row_ctr++; /* count rows received */ - } - - /* Postprocessor typically will not swallow all the input data it is handed - * in one call (due to filling the output buffer first). Must be prepared - * to exit and restart. This switch lets us keep track of how far we got. - * Note that each case falls through to the next on successful completion. - */ - switch (main_ptr->context_state) { - case CTX_POSTPONED_ROW: - /* Call postprocessor using previously set pointers for postponed row */ - (*cinfo->post->post_process_data) (cinfo, main_ptr->xbuffer[main_ptr->whichptr], - &main_ptr->rowgroup_ctr, main_ptr->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (main_ptr->rowgroup_ctr < main_ptr->rowgroups_avail) - return; /* Need to suspend */ - main_ptr->context_state = CTX_PREPARE_FOR_IMCU; - if (*out_row_ctr >= out_rows_avail) - return; /* Postprocessor exactly filled output buf */ - /*FALLTHROUGH*/ - case CTX_PREPARE_FOR_IMCU: - /* Prepare to process first M-1 row groups of this iMCU row */ - main_ptr->rowgroup_ctr = 0; - main_ptr->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1); - /* Check for bottom of image: if so, tweak pointers to "duplicate" - * the last sample row, and adjust rowgroups_avail to ignore padding rows. - */ - if (main_ptr->iMCU_row_ctr == cinfo->total_iMCU_rows) - set_bottom_pointers(cinfo); - main_ptr->context_state = CTX_PROCESS_IMCU; - /*FALLTHROUGH*/ - case CTX_PROCESS_IMCU: - /* Call postprocessor using previously set pointers */ - (*cinfo->post->post_process_data) (cinfo, main_ptr->xbuffer[main_ptr->whichptr], - &main_ptr->rowgroup_ctr, main_ptr->rowgroups_avail, - output_buf, out_row_ctr, out_rows_avail); - if (main_ptr->rowgroup_ctr < main_ptr->rowgroups_avail) - return; /* Need to suspend */ - /* After the first iMCU, change wraparound pointers to normal state */ - if (main_ptr->iMCU_row_ctr == 1) - set_wraparound_pointers(cinfo); - /* Prepare to load new iMCU row using other xbuffer list */ - main_ptr->whichptr ^= 1; /* 0=>1 or 1=>0 */ - main_ptr->buffer_full = FALSE; - /* Still need to process last row group of this iMCU row, */ - /* which is saved at index M+1 of the other xbuffer */ - main_ptr->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1); - main_ptr->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2); - main_ptr->context_state = CTX_POSTPONED_ROW; - } -} - - -/* - * Process some data. - * Final pass of two-pass quantization: just call the postprocessor. - * Source data will be the postprocessor controller's internal buffer. - */ - -#ifdef QUANT_2PASS_SUPPORTED - -METHODDEF(void) -process_data_crank_post (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, - (JDIMENSION *) NULL, (JDIMENSION) 0, - output_buf, out_row_ctr, out_rows_avail); -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize main buffer controller. - */ - -GLOBAL(void) -jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_main_ptr main_ptr; - int ci, rgroup, ngroups; - jpeg_component_info *compptr; - - main_ptr = (my_main_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_main_controller)); - cinfo->main = (struct jpeg_d_main_controller *) main_ptr; - main_ptr->pub.start_pass = start_pass_main; - - if (need_full_buffer) /* shouldn't happen */ - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - - /* Allocate the workspace. - * ngroups is the number of row groups we need. - */ - if (cinfo->upsample->need_context_rows) { - if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */ - ERREXIT(cinfo, JERR_NOTIMPL); - alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ - ngroups = cinfo->min_DCT_scaled_size + 2; - } else { - ngroups = cinfo->min_DCT_scaled_size; - } - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; /* height of a row group of component */ - main_ptr->buffer[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - compptr->width_in_blocks * compptr->DCT_scaled_size, - (JDIMENSION) (rgroup * ngroups)); - } -} diff --git a/libjpegtwrp/jdmarker.c b/libjpegtwrp/jdmarker.c deleted file mode 100644 index 733294050..000000000 --- a/libjpegtwrp/jdmarker.c +++ /dev/null @@ -1,1397 +0,0 @@ -/* - * jdmarker.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to decode JPEG datastream markers. - * Most of the complexity arises from our desire to support input - * suspension: if not all of the data for a marker is available, - * we must exit back to the application. On resumption, we reprocess - * the marker. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -typedef enum { /* JPEG marker codes */ - M_SOF0 = 0xc0, - M_SOF1 = 0xc1, - M_SOF2 = 0xc2, - M_SOF3 = 0xc3, - - M_SOF5 = 0xc5, - M_SOF6 = 0xc6, - M_SOF7 = 0xc7, - - M_JPG = 0xc8, - M_SOF9 = 0xc9, - M_SOF10 = 0xca, - M_SOF11 = 0xcb, - - M_SOF13 = 0xcd, - M_SOF14 = 0xce, - M_SOF15 = 0xcf, - - M_DHT = 0xc4, - - M_DAC = 0xcc, - - M_RST0 = 0xd0, - M_RST1 = 0xd1, - M_RST2 = 0xd2, - M_RST3 = 0xd3, - M_RST4 = 0xd4, - M_RST5 = 0xd5, - M_RST6 = 0xd6, - M_RST7 = 0xd7, - - M_SOI = 0xd8, - M_EOI = 0xd9, - M_SOS = 0xda, - M_DQT = 0xdb, - M_DNL = 0xdc, - M_DRI = 0xdd, - M_DHP = 0xde, - M_EXP = 0xdf, - - M_APP0 = 0xe0, - M_APP1 = 0xe1, - M_APP2 = 0xe2, - M_APP3 = 0xe3, - M_APP4 = 0xe4, - M_APP5 = 0xe5, - M_APP6 = 0xe6, - M_APP7 = 0xe7, - M_APP8 = 0xe8, - M_APP9 = 0xe9, - M_APP10 = 0xea, - M_APP11 = 0xeb, - M_APP12 = 0xec, - M_APP13 = 0xed, - M_APP14 = 0xee, - M_APP15 = 0xef, - - M_JPG0 = 0xf0, - M_JPG13 = 0xfd, - M_COM = 0xfe, - - M_TEM = 0x01, - - M_ERROR = 0x100 -} JPEG_MARKER; - - -/* Private state */ - -typedef struct { - struct jpeg_marker_reader pub; /* public fields */ - - /* Application-overridable marker processing methods */ - jpeg_marker_parser_method process_COM; - jpeg_marker_parser_method process_APPn[16]; - - /* Limit on marker data length to save for each marker type */ - unsigned int length_limit_COM; - unsigned int length_limit_APPn[16]; - - /* Status of COM/APPn marker saving */ - jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */ - unsigned int bytes_read; /* data bytes read so far in marker */ - /* Note: cur_marker is not linked into marker_list until it's all read. */ -} my_marker_reader; - -typedef my_marker_reader * my_marker_ptr; - - -/* - * Macros for fetching data from the data source module. - * - * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect - * the current restart point; we update them only when we have reached a - * suitable place to restart if a suspension occurs. - */ - -/* Declare and initialize local copies of input pointer/count */ -#define INPUT_VARS(cinfo) \ - struct jpeg_source_mgr * datasrc = (cinfo)->src; \ - const JOCTET * next_input_byte = datasrc->next_input_byte; \ - size_t bytes_in_buffer = datasrc->bytes_in_buffer - -/* Unload the local copies --- do this only at a restart boundary */ -#define INPUT_SYNC(cinfo) \ - ( datasrc->next_input_byte = next_input_byte, \ - datasrc->bytes_in_buffer = bytes_in_buffer ) - -/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */ -#define INPUT_RELOAD(cinfo) \ - ( next_input_byte = datasrc->next_input_byte, \ - bytes_in_buffer = datasrc->bytes_in_buffer ) - -/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. - * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, - * but we must reload the local copies after a successful fill. - */ -#define MAKE_BYTE_AVAIL(cinfo,action) \ - if (bytes_in_buffer == 0) { \ - if (! (*datasrc->fill_input_buffer) (cinfo)) \ - { action; } \ - INPUT_RELOAD(cinfo); \ - } - -/* Read a byte into variable V. - * If must suspend, take the specified action (typically "return FALSE"). - */ -#define INPUT_BYTE(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - bytes_in_buffer--; \ - V = GETJOCTET(*next_input_byte++); ) - -/* As above, but read two bytes interpreted as an unsigned 16-bit integer. - * V should be declared unsigned int or perhaps INT32. - */ -#define INPUT_2BYTES(cinfo,V,action) \ - MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ - bytes_in_buffer--; \ - V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ - MAKE_BYTE_AVAIL(cinfo,action); \ - bytes_in_buffer--; \ - V += GETJOCTET(*next_input_byte++); ) - - -/* - * Routines to process JPEG markers. - * - * Entry condition: JPEG marker itself has been read and its code saved - * in cinfo->unread_marker; input restart point is just after the marker. - * - * Exit: if return TRUE, have read and processed any parameters, and have - * updated the restart point to point after the parameters. - * If return FALSE, was forced to suspend before reaching end of - * marker parameters; restart point has not been moved. Same routine - * will be called again after application supplies more input data. - * - * This approach to suspension assumes that all of a marker's parameters - * can fit into a single input bufferload. This should hold for "normal" - * markers. Some COM/APPn markers might have large parameter segments - * that might not fit. If we are simply dropping such a marker, we use - * skip_input_data to get past it, and thereby put the problem on the - * source manager's shoulders. If we are saving the marker's contents - * into memory, we use a slightly different convention: when forced to - * suspend, the marker processor updates the restart point to the end of - * what it's consumed (ie, the end of the buffer) before returning FALSE. - * On resumption, cinfo->unread_marker still contains the marker code, - * but the data source will point to the next chunk of marker data. - * The marker processor must retain internal state to deal with this. - * - * Note that we don't bother to avoid duplicate trace messages if a - * suspension occurs within marker parameters. Other side effects - * require more care. - */ - - -LOCAL(boolean) -get_soi (j_decompress_ptr cinfo) -/* Process an SOI marker */ -{ - int i; - - TRACEMS(cinfo, 1, JTRC_SOI); - - if (cinfo->marker->saw_SOI) - ERREXIT(cinfo, JERR_SOI_DUPLICATE); - - /* Reset all parameters that are defined to be reset by SOI */ - - for (i = 0; i < NUM_ARITH_TBLS; i++) { - cinfo->arith_dc_L[i] = 0; - cinfo->arith_dc_U[i] = 1; - cinfo->arith_ac_K[i] = 5; - } - cinfo->restart_interval = 0; - - /* Set initial assumptions for colorspace etc */ - - cinfo->jpeg_color_space = JCS_UNKNOWN; - cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ - - cinfo->saw_JFIF_marker = FALSE; - cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */ - cinfo->JFIF_minor_version = 1; - cinfo->density_unit = 0; - cinfo->X_density = 1; - cinfo->Y_density = 1; - cinfo->saw_Adobe_marker = FALSE; - cinfo->Adobe_transform = 0; - - cinfo->marker->saw_SOI = TRUE; - - return TRUE; -} - - -LOCAL(boolean) -get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith) -/* Process a SOFn marker */ -{ - INT32 length; - int c, ci; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - cinfo->progressive_mode = is_prog; - cinfo->arith_code = is_arith; - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); - INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); - INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); - - length -= 8; - - TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, - (int) cinfo->image_width, (int) cinfo->image_height, - cinfo->num_components); - - if (cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOF_DUPLICATE); - - /* We don't support files in which the image height is initially specified */ - /* as 0 and is later redefined by DNL. As long as we have to check that, */ - /* might as well have a general sanity check. */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - if (length != (cinfo->num_components * 3)) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - if (cinfo->comp_info == NULL) /* do only once, even if suspend */ - cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components * SIZEOF(jpeg_component_info)); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - compptr->component_index = ci; - INPUT_BYTE(cinfo, compptr->component_id, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - compptr->h_samp_factor = (c >> 4) & 15; - compptr->v_samp_factor = (c ) & 15; - INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); - - TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, - compptr->component_id, compptr->h_samp_factor, - compptr->v_samp_factor, compptr->quant_tbl_no); - } - - cinfo->marker->saw_SOF = TRUE; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -get_sos (j_decompress_ptr cinfo) -/* Process a SOS marker */ -{ - INT32 length; - int i, ci, n, c, cc; - jpeg_component_info * compptr; - INPUT_VARS(cinfo); - - if (! cinfo->marker->saw_SOF) - ERREXIT(cinfo, JERR_SOS_NO_SOF); - - INPUT_2BYTES(cinfo, length, return FALSE); - - INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ - - TRACEMS1(cinfo, 1, JTRC_SOS, n); - - if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - cinfo->comps_in_scan = n; - - /* Collect the component-spec parameters */ - - for (i = 0; i < n; i++) { - INPUT_BYTE(cinfo, cc, return FALSE); - INPUT_BYTE(cinfo, c, return FALSE); - - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (cc == compptr->component_id) - goto id_found; - } - - ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); - - id_found: - - cinfo->cur_comp_info[i] = compptr; - compptr->dc_tbl_no = (c >> 4) & 15; - compptr->ac_tbl_no = (c ) & 15; - - TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, - compptr->dc_tbl_no, compptr->ac_tbl_no); - } - - /* Collect the additional scan parameters Ss, Se, Ah/Al. */ - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ss = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Se = c; - INPUT_BYTE(cinfo, c, return FALSE); - cinfo->Ah = (c >> 4) & 15; - cinfo->Al = (c ) & 15; - - TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, - cinfo->Ah, cinfo->Al); - - /* Prepare to scan data & restart markers */ - cinfo->marker->next_restart_num = 0; - - /* Count another SOS marker */ - cinfo->input_scan_number++; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -#ifdef D_ARITH_CODING_SUPPORTED - -LOCAL(boolean) -get_dac (j_decompress_ptr cinfo) -/* Process a DAC marker */ -{ - INT32 length; - int index, val; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, index, return FALSE); - INPUT_BYTE(cinfo, val, return FALSE); - - length -= 2; - - TRACEMS2(cinfo, 1, JTRC_DAC, index, val); - - if (index < 0 || index >= (2*NUM_ARITH_TBLS)) - ERREXIT1(cinfo, JERR_DAC_INDEX, index); - - if (index >= NUM_ARITH_TBLS) { /* define AC table */ - cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; - } else { /* define DC table */ - cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); - cinfo->arith_dc_U[index] = (UINT8) (val >> 4); - if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) - ERREXIT1(cinfo, JERR_DAC_VALUE, val); - } - } - - if (length != 0) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_SYNC(cinfo); - return TRUE; -} - -#else /* ! D_ARITH_CODING_SUPPORTED */ - -#define get_dac(cinfo) skip_variable(cinfo) - -#endif /* D_ARITH_CODING_SUPPORTED */ - - -LOCAL(boolean) -get_dht (j_decompress_ptr cinfo) -/* Process a DHT marker */ -{ - INT32 length; - UINT8 bits[17]; - UINT8 huffval[256]; - int i, index, count; - JHUFF_TBL **htblptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 16) { - INPUT_BYTE(cinfo, index, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DHT, index); - - bits[0] = 0; - count = 0; - for (i = 1; i <= 16; i++) { - INPUT_BYTE(cinfo, bits[i], return FALSE); - count += bits[i]; - } - - length -= 1 + 16; - - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[1], bits[2], bits[3], bits[4], - bits[5], bits[6], bits[7], bits[8]); - TRACEMS8(cinfo, 2, JTRC_HUFFBITS, - bits[9], bits[10], bits[11], bits[12], - bits[13], bits[14], bits[15], bits[16]); - - /* Here we just do minimal validation of the counts to avoid walking - * off the end of our table space. jdhuff.c will check more carefully. - */ - if (count > 256 || ((INT32) count) > length) - ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); - - for (i = 0; i < count; i++) - INPUT_BYTE(cinfo, huffval[i], return FALSE); - - length -= count; - - if (index & 0x10) { /* AC table definition */ - index -= 0x10; - htblptr = &cinfo->ac_huff_tbl_ptrs[index]; - } else { /* DC table definition */ - htblptr = &cinfo->dc_huff_tbl_ptrs[index]; - } - - if (index < 0 || index >= NUM_HUFF_TBLS) - ERREXIT1(cinfo, JERR_DHT_INDEX, index); - - if (*htblptr == NULL) - *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); - - MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); - MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); - } - - if (length != 0) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -get_dqt (j_decompress_ptr cinfo) -/* Process a DQT marker */ -{ - INT32 length; - int n, i, prec; - unsigned int tmp; - JQUANT_TBL *quant_ptr; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - while (length > 0) { - INPUT_BYTE(cinfo, n, return FALSE); - prec = n >> 4; - n &= 0x0F; - - TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); - - if (n >= NUM_QUANT_TBLS) - ERREXIT1(cinfo, JERR_DQT_INDEX, n); - - if (cinfo->quant_tbl_ptrs[n] == NULL) - cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); - quant_ptr = cinfo->quant_tbl_ptrs[n]; - - for (i = 0; i < DCTSIZE2; i++) { - if (prec) - INPUT_2BYTES(cinfo, tmp, return FALSE); - else - INPUT_BYTE(cinfo, tmp, return FALSE); - /* We convert the zigzag-order table to natural array order. */ - quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp; - } - - if (cinfo->err->trace_level >= 2) { - for (i = 0; i < DCTSIZE2; i += 8) { - TRACEMS8(cinfo, 2, JTRC_QUANTVALS, - quant_ptr->quantval[i], quant_ptr->quantval[i+1], - quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], - quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], - quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); - } - } - - length -= DCTSIZE2+1; - if (prec) length -= DCTSIZE2; - } - - if (length != 0) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -get_dri (j_decompress_ptr cinfo) -/* Process a DRI marker */ -{ - INT32 length; - unsigned int tmp; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - - if (length != 4) - ERREXIT(cinfo, JERR_BAD_LENGTH); - - INPUT_2BYTES(cinfo, tmp, return FALSE); - - TRACEMS1(cinfo, 1, JTRC_DRI, tmp); - - cinfo->restart_interval = tmp; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -/* - * Routines for processing APPn and COM markers. - * These are either saved in memory or discarded, per application request. - * APP0 and APP14 are specially checked to see if they are - * JFIF and Adobe markers, respectively. - */ - -#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */ -#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */ -#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */ - - -LOCAL(void) -examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, - unsigned int datalen, INT32 remaining) -/* Examine first few bytes from an APP0. - * Take appropriate action if it is a JFIF marker. - * datalen is # of bytes at data[], remaining is length of rest of marker data. - */ -{ - INT32 totallen = (INT32) datalen + remaining; - - if (datalen >= APP0_DATA_LEN && - GETJOCTET(data[0]) == 0x4A && - GETJOCTET(data[1]) == 0x46 && - GETJOCTET(data[2]) == 0x49 && - GETJOCTET(data[3]) == 0x46 && - GETJOCTET(data[4]) == 0) { - /* Found JFIF APP0 marker: save info */ - cinfo->saw_JFIF_marker = TRUE; - cinfo->JFIF_major_version = GETJOCTET(data[5]); - cinfo->JFIF_minor_version = GETJOCTET(data[6]); - cinfo->density_unit = GETJOCTET(data[7]); - cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); - cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); - /* Check version. - * Major version must be 1, anything else signals an incompatible change. - * (We used to treat this as an error, but now it's a nonfatal warning, - * because some bozo at Hijaak couldn't read the spec.) - * Minor version should be 0..2, but process anyway if newer. - */ - if (cinfo->JFIF_major_version != 1) - WARNMS2(cinfo, JWRN_JFIF_MAJOR, - cinfo->JFIF_major_version, cinfo->JFIF_minor_version); - /* Generate trace messages */ - TRACEMS5(cinfo, 1, JTRC_JFIF, - cinfo->JFIF_major_version, cinfo->JFIF_minor_version, - cinfo->X_density, cinfo->Y_density, cinfo->density_unit); - /* Validate thumbnail dimensions and issue appropriate messages */ - if (GETJOCTET(data[12]) | GETJOCTET(data[13])) - TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, - GETJOCTET(data[12]), GETJOCTET(data[13])); - totallen -= APP0_DATA_LEN; - if (totallen != - ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) - TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); - } else if (datalen >= 6 && - GETJOCTET(data[0]) == 0x4A && - GETJOCTET(data[1]) == 0x46 && - GETJOCTET(data[2]) == 0x58 && - GETJOCTET(data[3]) == 0x58 && - GETJOCTET(data[4]) == 0) { - /* Found JFIF "JFXX" extension APP0 marker */ - /* The library doesn't actually do anything with these, - * but we try to produce a helpful trace message. - */ - switch (GETJOCTET(data[5])) { - case 0x10: - TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen); - break; - case 0x11: - TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen); - break; - case 0x13: - TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen); - break; - default: - TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, - GETJOCTET(data[5]), (int) totallen); - break; - } - } else { - /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ - TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen); - } -} - - -LOCAL(void) -examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, - unsigned int datalen, INT32 remaining) -/* Examine first few bytes from an APP14. - * Take appropriate action if it is an Adobe marker. - * datalen is # of bytes at data[], remaining is length of rest of marker data. - */ -{ - unsigned int version, flags0, flags1, transform; - - if (datalen >= APP14_DATA_LEN && - GETJOCTET(data[0]) == 0x41 && - GETJOCTET(data[1]) == 0x64 && - GETJOCTET(data[2]) == 0x6F && - GETJOCTET(data[3]) == 0x62 && - GETJOCTET(data[4]) == 0x65) { - /* Found Adobe APP14 marker */ - version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]); - flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]); - flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]); - transform = GETJOCTET(data[11]); - TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); - cinfo->saw_Adobe_marker = TRUE; - cinfo->Adobe_transform = (UINT8) transform; - } else { - /* Start of APP14 does not match "Adobe", or too short */ - TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining)); - } -} - - -METHODDEF(boolean) -get_interesting_appn (j_decompress_ptr cinfo) -/* Process an APP0 or APP14 marker without saving it */ -{ - INT32 length; - JOCTET b[APPN_DATA_LEN]; - unsigned int i, numtoread; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - /* get the interesting part of the marker data */ - if (length >= APPN_DATA_LEN) - numtoread = APPN_DATA_LEN; - else if (length > 0) - numtoread = (unsigned int) length; - else - numtoread = 0; - for (i = 0; i < numtoread; i++) - INPUT_BYTE(cinfo, b[i], return FALSE); - length -= numtoread; - - /* process it */ - switch (cinfo->unread_marker) { - case M_APP0: - examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length); - break; - case M_APP14: - examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length); - break; - default: - /* can't get here unless jpeg_save_markers chooses wrong processor */ - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; - } - - /* skip any remaining data -- could be lots */ - INPUT_SYNC(cinfo); - if (length > 0) - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -#ifdef SAVE_MARKERS_SUPPORTED - -METHODDEF(boolean) -save_marker (j_decompress_ptr cinfo) -/* Save an APPn or COM marker into the marker list */ -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - jpeg_saved_marker_ptr cur_marker = marker->cur_marker; - unsigned int bytes_read, data_length; - JOCTET FAR * data; - INT32 length = 0; - INPUT_VARS(cinfo); - - if (cur_marker == NULL) { - /* begin reading a marker */ - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - if (length >= 0) { /* watch out for bogus length word */ - /* figure out how much we want to save */ - unsigned int limit; - if (cinfo->unread_marker == (int) M_COM) - limit = marker->length_limit_COM; - else - limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0]; - if ((unsigned int) length < limit) - limit = (unsigned int) length; - /* allocate and initialize the marker item */ - cur_marker = (jpeg_saved_marker_ptr) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(struct jpeg_marker_struct) + limit); - cur_marker->next = NULL; - cur_marker->marker = (UINT8) cinfo->unread_marker; - cur_marker->original_length = (unsigned int) length; - cur_marker->data_length = limit; - /* data area is just beyond the jpeg_marker_struct */ - data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1); - marker->cur_marker = cur_marker; - marker->bytes_read = 0; - bytes_read = 0; - data_length = limit; - } else { - /* deal with bogus length word */ - bytes_read = data_length = 0; - data = NULL; - } - } else { - /* resume reading a marker */ - bytes_read = marker->bytes_read; - data_length = cur_marker->data_length; - data = cur_marker->data + bytes_read; - } - - while (bytes_read < data_length) { - INPUT_SYNC(cinfo); /* move the restart point to here */ - marker->bytes_read = bytes_read; - /* If there's not at least one byte in buffer, suspend */ - MAKE_BYTE_AVAIL(cinfo, return FALSE); - /* Copy bytes with reasonable rapidity */ - while (bytes_read < data_length && bytes_in_buffer > 0) { - *data++ = *next_input_byte++; - bytes_in_buffer--; - bytes_read++; - } - } - - /* Done reading what we want to read */ - if (cur_marker != NULL) { /* will be NULL if bogus length word */ - /* Add new marker to end of list */ - if (cinfo->marker_list == NULL) { - cinfo->marker_list = cur_marker; - } else { - jpeg_saved_marker_ptr prev = cinfo->marker_list; - while (prev->next != NULL) - prev = prev->next; - prev->next = cur_marker; - } - /* Reset pointer & calc remaining data length */ - data = cur_marker->data; - length = cur_marker->original_length - data_length; - } - /* Reset to initial state for next marker */ - marker->cur_marker = NULL; - - /* Process the marker if interesting; else just make a generic trace msg */ - switch (cinfo->unread_marker) { - case M_APP0: - examine_app0(cinfo, data, data_length, length); - break; - case M_APP14: - examine_app14(cinfo, data, data_length, length); - break; - default: - TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, - (int) (data_length + length)); - break; - } - - /* skip any remaining data -- could be lots */ - INPUT_SYNC(cinfo); /* do before skip_input_data */ - if (length > 0) - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - -#endif /* SAVE_MARKERS_SUPPORTED */ - - -METHODDEF(boolean) -skip_variable (j_decompress_ptr cinfo) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - INT32 length; - INPUT_VARS(cinfo); - - INPUT_2BYTES(cinfo, length, return FALSE); - length -= 2; - - TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); - - INPUT_SYNC(cinfo); /* do before skip_input_data */ - if (length > 0) - (*cinfo->src->skip_input_data) (cinfo, (long) length); - - return TRUE; -} - - -/* - * Find the next JPEG marker, save it in cinfo->unread_marker. - * Returns FALSE if had to suspend before reaching a marker; - * in that case cinfo->unread_marker is unchanged. - * - * Note that the result might not be a valid marker code, - * but it will never be 0 or FF. - */ - -LOCAL(boolean) -next_marker (j_decompress_ptr cinfo) -{ - int c; - INPUT_VARS(cinfo); - - for (;;) { - INPUT_BYTE(cinfo, c, return FALSE); - /* Skip any non-FF bytes. - * This may look a bit inefficient, but it will not occur in a valid file. - * We sync after each discarded byte so that a suspending data source - * can discard the byte from its buffer. - */ - while (c != 0xFF) { - cinfo->marker->discarded_bytes++; - INPUT_SYNC(cinfo); - INPUT_BYTE(cinfo, c, return FALSE); - } - /* This loop swallows any duplicate FF bytes. Extra FFs are legal as - * pad bytes, so don't count them in discarded_bytes. We assume there - * will not be so many consecutive FF bytes as to overflow a suspending - * data source's input buffer. - */ - do { - INPUT_BYTE(cinfo, c, return FALSE); - } while (c == 0xFF); - if (c != 0) - break; /* found a valid marker, exit loop */ - /* Reach here if we found a stuffed-zero data sequence (FF/00). - * Discard it and loop back to try again. - */ - cinfo->marker->discarded_bytes += 2; - INPUT_SYNC(cinfo); - } - - if (cinfo->marker->discarded_bytes != 0) { - WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); - cinfo->marker->discarded_bytes = 0; - } - - cinfo->unread_marker = c; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -LOCAL(boolean) -first_marker (j_decompress_ptr cinfo) -/* Like next_marker, but used to obtain the initial SOI marker. */ -/* For this marker, we do not allow preceding garbage or fill; otherwise, - * we might well scan an entire input file before realizing it ain't JPEG. - * If an application wants to process non-JFIF files, it must seek to the - * SOI before calling the JPEG library. - */ -{ - int c, c2; - INPUT_VARS(cinfo); - - INPUT_BYTE(cinfo, c, return FALSE); - INPUT_BYTE(cinfo, c2, return FALSE); - if (c != 0xFF || c2 != (int) M_SOI) - ERREXIT2(cinfo, JERR_NO_SOI, c, c2); - - cinfo->unread_marker = c2; - - INPUT_SYNC(cinfo); - return TRUE; -} - - -/* - * Read markers until SOS or EOI. - * - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - -METHODDEF(int) -read_markers (j_decompress_ptr cinfo) -{ - /* Outer loop repeats once for each marker. */ - for (;;) { - /* Collect the marker proper, unless we already did. */ - /* NB: first_marker() enforces the requirement that SOI appear first. */ - if (cinfo->unread_marker == 0) { - if (! cinfo->marker->saw_SOI) { - if (! first_marker(cinfo)) - return JPEG_SUSPENDED; - } else { - if (! next_marker(cinfo)) - return JPEG_SUSPENDED; - } - } - - /* - * Save the position of the fist marker after SOF. - */ - if (cinfo->marker->current_sos_marker_position == -1) - cinfo->marker->current_sos_marker_position = - jget_input_stream_position(cinfo) - 2; - - /* At this point cinfo->unread_marker contains the marker code and the - * input point is just past the marker proper, but before any parameters. - * A suspension will cause us to return with this state still true. - */ - switch (cinfo->unread_marker) { - case M_SOI: - if (! get_soi(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - if (! get_sof(cinfo, FALSE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF2: /* Progressive, Huffman */ - cinfo->marker->current_sos_marker_position = -1; - if (! get_sof(cinfo, TRUE, FALSE)) - return JPEG_SUSPENDED; - break; - - case M_SOF9: /* Extended sequential, arithmetic */ - if (! get_sof(cinfo, FALSE, TRUE)) - return JPEG_SUSPENDED; - break; - - case M_SOF10: /* Progressive, arithmetic */ - if (! get_sof(cinfo, TRUE, TRUE)) - return JPEG_SUSPENDED; - break; - - /* Currently unsupported SOFn types */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_JPG: /* Reserved for JPEG extensions */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); - break; - - case M_SOS: - if (! get_sos(cinfo)) - return JPEG_SUSPENDED; - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_SOS; - - case M_EOI: - TRACEMS(cinfo, 1, JTRC_EOI); - cinfo->unread_marker = 0; /* processed the marker */ - return JPEG_REACHED_EOI; - - case M_DAC: - if (! get_dac(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DHT: - if (! get_dht(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DQT: - if (! get_dqt(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_DRI: - if (! get_dri(cinfo)) - return JPEG_SUSPENDED; - break; - - case M_APP0: - case M_APP1: - case M_APP2: - case M_APP3: - case M_APP4: - case M_APP5: - case M_APP6: - case M_APP7: - case M_APP8: - case M_APP9: - case M_APP10: - case M_APP11: - case M_APP12: - case M_APP13: - case M_APP14: - case M_APP15: - if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[ - cinfo->unread_marker - (int) M_APP0]) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_COM: - if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) - return JPEG_SUSPENDED; - break; - - case M_RST0: /* these are all parameterless */ - case M_RST1: - case M_RST2: - case M_RST3: - case M_RST4: - case M_RST5: - case M_RST6: - case M_RST7: - case M_TEM: - TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); - break; - - case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ - if (! skip_variable(cinfo)) - return JPEG_SUSPENDED; - break; - - default: /* must be DHP, EXP, JPGn, or RESn */ - /* For now, we treat the reserved markers as fatal errors since they are - * likely to be used to signal incompatible JPEG Part 3 extensions. - * Once the JPEG 3 version-number marker is well defined, this code - * ought to change! - */ - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); - break; - } - /* Successfully processed marker, so reset state variable */ - cinfo->unread_marker = 0; - } /* end loop */ -} - - -/* - * Read a restart marker, which is expected to appear next in the datastream; - * if the marker is not there, take appropriate recovery action. - * Returns FALSE if suspension is required. - * - * This is called by the entropy decoder after it has read an appropriate - * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder - * has already read a marker from the data source. Under normal conditions - * cinfo->unread_marker will be reset to 0 before returning; if not reset, - * it holds a marker which the decoder will be unable to read past. - */ - -METHODDEF(boolean) -read_restart_marker (j_decompress_ptr cinfo) -{ - /* Obtain a marker unless we already did. */ - /* Note that next_marker will complain if it skips any data. */ - if (cinfo->unread_marker == 0) { - if (! next_marker(cinfo)) - return FALSE; - } - - if (cinfo->unread_marker == - ((int) M_RST0 + cinfo->marker->next_restart_num)) { - /* Normal case --- swallow the marker and let entropy decoder continue */ - TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num); - cinfo->unread_marker = 0; - } else { - /* Uh-oh, the restart markers have been messed up. */ - /* Let the data source manager determine how to resync. */ - if (! (*cinfo->src->resync_to_restart) (cinfo, - cinfo->marker->next_restart_num)) - return FALSE; - } - - /* Update next-restart state */ - cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; - - return TRUE; -} - - -/* - * This is the default resync_to_restart method for data source managers - * to use if they don't have any better approach. Some data source managers - * may be able to back up, or may have additional knowledge about the data - * which permits a more intelligent recovery strategy; such managers would - * presumably supply their own resync method. - * - * read_restart_marker calls resync_to_restart if it finds a marker other than - * the restart marker it was expecting. (This code is *not* used unless - * a nonzero restart interval has been declared.) cinfo->unread_marker is - * the marker code actually found (might be anything, except 0 or FF). - * The desired restart marker number (0..7) is passed as a parameter. - * This routine is supposed to apply whatever error recovery strategy seems - * appropriate in order to position the input stream to the next data segment. - * Note that cinfo->unread_marker is treated as a marker appearing before - * the current data-source input point; usually it should be reset to zero - * before returning. - * Returns FALSE if suspension is required. - * - * This implementation is substantially constrained by wanting to treat the - * input as a data stream; this means we can't back up. Therefore, we have - * only the following actions to work with: - * 1. Simply discard the marker and let the entropy decoder resume at next - * byte of file. - * 2. Read forward until we find another marker, discarding intervening - * data. (In theory we could look ahead within the current bufferload, - * without having to discard data if we don't find the desired marker. - * This idea is not implemented here, in part because it makes behavior - * dependent on buffer size and chance buffer-boundary positions.) - * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). - * This will cause the entropy decoder to process an empty data segment, - * inserting dummy zeroes, and then we will reprocess the marker. - * - * #2 is appropriate if we think the desired marker lies ahead, while #3 is - * appropriate if the found marker is a future restart marker (indicating - * that we have missed the desired restart marker, probably because it got - * corrupted). - * We apply #2 or #3 if the found marker is a restart marker no more than - * two counts behind or ahead of the expected one. We also apply #2 if the - * found marker is not a legal JPEG marker code (it's certainly bogus data). - * If the found marker is a restart marker more than 2 counts away, we do #1 - * (too much risk that the marker is erroneous; with luck we will be able to - * resync at some future point). - * For any valid non-restart JPEG marker, we apply #3. This keeps us from - * overrunning the end of a scan. An implementation limited to single-scan - * files might find it better to apply #2 for markers other than EOI, since - * any other marker would have to be bogus data in that case. - */ - -GLOBAL(boolean) -jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) -{ - int marker = cinfo->unread_marker; - int action = 1; - - /* Always put up a warning. */ - WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); - - /* Outer loop handles repeated decision after scanning forward. */ - for (;;) { - if (marker < (int) M_SOF0) - action = 2; /* invalid marker */ - else if (marker < (int) M_RST0 || marker > (int) M_RST7) - action = 3; /* valid non-restart marker */ - else { - if (marker == ((int) M_RST0 + ((desired+1) & 7)) || - marker == ((int) M_RST0 + ((desired+2) & 7))) - action = 3; /* one of the next two expected restarts */ - else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || - marker == ((int) M_RST0 + ((desired-2) & 7))) - action = 2; /* a prior restart, so advance */ - else - action = 1; /* desired restart or too far away */ - } - TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); - switch (action) { - case 1: - /* Discard marker and let entropy decoder resume processing. */ - cinfo->unread_marker = 0; - return TRUE; - case 2: - /* Scan to the next marker, and repeat the decision loop. */ - if (! next_marker(cinfo)) - return FALSE; - marker = cinfo->unread_marker; - break; - case 3: - /* Return without advancing past this marker. */ - /* Entropy decoder will be forced to process an empty segment. */ - return TRUE; - } - } /* end loop */ -} - -/* - * Get the position for all SOS markers in the image. - */ - -METHODDEF(void) -get_sos_marker_position(j_decompress_ptr cinfo, huffman_index *index) -{ - unsigned char *head; - int count = 0; - int retcode = JPEG_REACHED_SOS; - - while (cinfo->src->bytes_in_buffer > 0) { - if (retcode == JPEG_REACHED_SOS) { - jpeg_configure_huffman_index_scan(cinfo, index, count++, - cinfo->marker->current_sos_marker_position); - // Skips scan content to the next non-RST JPEG marker. - while(next_marker(cinfo) && - cinfo->unread_marker >= M_RST0 && cinfo->unread_marker <= M_RST7) - ; - cinfo->marker->current_sos_marker_position = - jget_input_stream_position(cinfo) - 2; - retcode = read_markers(cinfo); - } else { - break; - } - } -} - -/* - * Reset marker processing state to begin a fresh datastream. - */ - -METHODDEF(void) -reset_marker_reader (j_decompress_ptr cinfo) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - - cinfo->comp_info = NULL; /* until allocated by get_sof */ - cinfo->input_scan_number = 0; /* no SOS seen yet */ - cinfo->unread_marker = 0; /* no pending marker */ - marker->pub.saw_SOI = FALSE; /* set internal state too */ - marker->pub.saw_SOF = FALSE; - marker->pub.discarded_bytes = 0; - marker->cur_marker = NULL; -} - - -/* - * Initialize the marker reader module. - * This is called only once, when the decompression object is created. - */ - -GLOBAL(void) -jinit_marker_reader (j_decompress_ptr cinfo) -{ - my_marker_ptr marker; - int i; - - /* Create subobject in permanent pool */ - marker = (my_marker_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, - SIZEOF(my_marker_reader)); - cinfo->marker = (struct jpeg_marker_reader *) marker; - /* Initialize public method pointers */ - marker->pub.reset_marker_reader = reset_marker_reader; - marker->pub.read_markers = read_markers; - marker->pub.read_restart_marker = read_restart_marker; - marker->pub.get_sos_marker_position = get_sos_marker_position; - /* Initialize COM/APPn processing. - * By default, we examine and then discard APP0 and APP14, - * but simply discard COM and all other APPn. - */ - marker->process_COM = skip_variable; - marker->length_limit_COM = 0; - for (i = 0; i < 16; i++) { - marker->process_APPn[i] = skip_variable; - marker->length_limit_APPn[i] = 0; - } - marker->process_APPn[0] = get_interesting_appn; - marker->process_APPn[14] = get_interesting_appn; - /* Reset marker processing state */ - reset_marker_reader(cinfo); -} - - -/* - * Control saving of COM and APPn markers into marker_list. - */ - -#ifdef SAVE_MARKERS_SUPPORTED - -GLOBAL(void) -jpeg_save_markers (j_decompress_ptr cinfo, int marker_code, - unsigned int length_limit) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - long maxlength; - jpeg_marker_parser_method processor; - - /* Length limit mustn't be larger than what we can allocate - * (should only be a concern in a 16-bit environment). - */ - maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct); - if (((long) length_limit) > maxlength) - length_limit = (unsigned int) maxlength; - - /* Choose processor routine to use. - * APP0/APP14 have special requirements. - */ - if (length_limit) { - processor = save_marker; - /* If saving APP0/APP14, save at least enough for our internal use. */ - if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN) - length_limit = APP0_DATA_LEN; - else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN) - length_limit = APP14_DATA_LEN; - } else { - processor = skip_variable; - /* If discarding APP0/APP14, use our regular on-the-fly processor. */ - if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14) - processor = get_interesting_appn; - } - - if (marker_code == (int) M_COM) { - marker->process_COM = processor; - marker->length_limit_COM = length_limit; - } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) { - marker->process_APPn[marker_code - (int) M_APP0] = processor; - marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit; - } else - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); -} - -#endif /* SAVE_MARKERS_SUPPORTED */ - - -/* - * Install a special processing method for COM or APPn markers. - */ - -GLOBAL(void) -jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine) -{ - my_marker_ptr marker = (my_marker_ptr) cinfo->marker; - - if (marker_code == (int) M_COM) - marker->process_COM = routine; - else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) - marker->process_APPn[marker_code - (int) M_APP0] = routine; - else - ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); -} diff --git a/libjpegtwrp/jdmaster.c b/libjpegtwrp/jdmaster.c deleted file mode 100644 index e3da758b1..000000000 --- a/libjpegtwrp/jdmaster.c +++ /dev/null @@ -1,580 +0,0 @@ -/* - * jdmaster.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG decompressor. - * These routines are concerned with selecting the modules to be executed - * and with determining the number of passes and the work to be done in each - * pass. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef struct { - struct jpeg_decomp_master pub; /* public fields */ - - int pass_number; /* # of passes completed */ - - boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ - - /* Saved references to initialized quantizer modules, - * in case we need to switch modes. - */ - struct jpeg_color_quantizer * quantizer_1pass; - struct jpeg_color_quantizer * quantizer_2pass; -} my_decomp_master; - -typedef my_decomp_master * my_master_ptr; - - -/* - * Determine whether merged upsample/color conversion should be used. - * CRUCIAL: this must match the actual capabilities of jdmerge.c! - */ - -LOCAL(boolean) -use_merged_upsample (j_decompress_ptr cinfo) -{ -#ifdef UPSAMPLE_MERGING_SUPPORTED - /* Merging is the equivalent of plain box-filter upsampling */ - if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) - return FALSE; - -#ifdef ANDROID_RGB - /* jdmerge.c only supports YCC=>RGB565 and YCC=>RGB color conversion */ - if (cinfo->jpeg_color_space != JCS_YCbCr || - cinfo->num_components != 3 || - cinfo->out_color_components != 3 || - (cinfo->out_color_space != JCS_RGB_565 && - cinfo->out_color_space != JCS_RGB)) { - return FALSE; - } -#else - /* jdmerge.c only supports YCC=>RGB color conversion */ - if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || - cinfo->out_color_space != JCS_RGB || - cinfo->out_color_components != RGB_PIXELSIZE) - return FALSE; -#endif - - /* and it only handles 2h1v or 2h2v sampling ratios */ - if (cinfo->comp_info[0].h_samp_factor != 2 || - cinfo->comp_info[1].h_samp_factor != 1 || - cinfo->comp_info[2].h_samp_factor != 1 || - cinfo->comp_info[0].v_samp_factor > 2 || - cinfo->comp_info[1].v_samp_factor != 1 || - cinfo->comp_info[2].v_samp_factor != 1) - return FALSE; - /* furthermore, it doesn't work if we've scaled the IDCTs differently */ - if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || - cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) - return FALSE; - /* ??? also need to test for upsample-time rescaling, when & if supported */ - return TRUE; /* by golly, it'll work... */ -#else - return FALSE; -#endif -} - - -/* - * Compute output image dimensions and related values. - * NOTE: this is exported for possible use by application. - * Hence it mustn't do anything that can't be done twice. - * Also note that it may be called before the master module is initialized! - */ - -GLOBAL(void) -jpeg_calc_output_dimensions (j_decompress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ -#ifdef IDCT_SCALING_SUPPORTED - int ci; - jpeg_component_info *compptr; -#endif - - /* Prevent application from calling me at wrong times */ -#if ANDROID_TILE_BASED_DECODE - // Tile based decoding may call this function several times. - if (!cinfo->tile_decode) -#endif - if (cinfo->global_state != DSTATE_READY) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - -#ifdef IDCT_SCALING_SUPPORTED - - /* Compute actual output image dimensions and DCT scaling choices. */ - if (cinfo->scale_num * 8 <= cinfo->scale_denom) { - /* Provide 1/8 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 8L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 8L); - cinfo->min_DCT_scaled_size = 1; - } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { - /* Provide 1/4 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 4L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 4L); - cinfo->min_DCT_scaled_size = 2; - } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { - /* Provide 1/2 scaling */ - cinfo->output_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, 2L); - cinfo->output_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, 2L); - cinfo->min_DCT_scaled_size = 4; - } else { - /* Provide 1/1 scaling */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - cinfo->min_DCT_scaled_size = DCTSIZE; - } - /* In selecting the actual DCT scaling for each component, we try to - * scale up the chroma components via IDCT scaling rather than upsampling. - * This saves time if the upsampler gets to use 1:1 scaling. - * Note this code assumes that the supported DCT scalings are powers of 2. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - int ssize = cinfo->min_DCT_scaled_size; - while (ssize < DCTSIZE && - (compptr->h_samp_factor * ssize * 2 <= - cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && - (compptr->v_samp_factor * ssize * 2 <= - cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { - ssize = ssize * 2; - } - compptr->DCT_scaled_size = ssize; - } - - /* Recompute downsampled dimensions of components; - * application needs to know these if using raw downsampled data. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Size in samples, after IDCT scaling */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * - (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * - (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - } - -#else /* !IDCT_SCALING_SUPPORTED */ - - /* Hardwire it to "no scaling" */ - cinfo->output_width = cinfo->image_width; - cinfo->output_height = cinfo->image_height; - /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, - * and has computed unscaled downsampled_width and downsampled_height. - */ - -#endif /* IDCT_SCALING_SUPPORTED */ - - /* Report number of components in selected colorspace. */ - /* Probably this should be in the color conversion module... */ - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - cinfo->out_color_components = 1; - break; - case JCS_RGB: -#if RGB_PIXELSIZE != 3 - cinfo->out_color_components = RGB_PIXELSIZE; - break; -#endif /* else share code with YCbCr */ -#ifdef ANDROID_RGB - case JCS_RGB_565: -#endif - case JCS_YCbCr: - cinfo->out_color_components = 3; - break; - case JCS_CMYK: - case JCS_YCCK: -#ifdef ANDROID_RGB - case JCS_RGBA_8888: -#endif - cinfo->out_color_components = 4; - break; - default: /* else must be same colorspace as in file */ - cinfo->out_color_components = cinfo->num_components; - break; - } - cinfo->output_components = (cinfo->quantize_colors ? 1 : - cinfo->out_color_components); - - /* See if upsampler will want to emit more than one row at a time */ - if (use_merged_upsample(cinfo)) - cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; - else - cinfo->rec_outbuf_height = 1; -} - - -/* - * Several decompression processes need to range-limit values to the range - * 0..MAXJSAMPLE; the input value may fall somewhat outside this range - * due to noise introduced by quantization, roundoff error, etc. These - * processes are inner loops and need to be as fast as possible. On most - * machines, particularly CPUs with pipelines or instruction prefetch, - * a (subscript-check-less) C table lookup - * x = sample_range_limit[x]; - * is faster than explicit tests - * if (x < 0) x = 0; - * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; - * These processes all use a common table prepared by the routine below. - * - * For most steps we can mathematically guarantee that the initial value - * of x is within MAXJSAMPLE+1 of the legal range, so a table running from - * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial - * limiting step (just after the IDCT), a wildly out-of-range value is - * possible if the input data is corrupt. To avoid any chance of indexing - * off the end of memory and getting a bad-pointer trap, we perform the - * post-IDCT limiting thus: - * x = range_limit[x & MASK]; - * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit - * samples. Under normal circumstances this is more than enough range and - * a correct output will be generated; with bogus input data the mask will - * cause wraparound, and we will safely generate a bogus-but-in-range output. - * For the post-IDCT step, we want to convert the data from signed to unsigned - * representation by adding CENTERJSAMPLE at the same time that we limit it. - * So the post-IDCT limiting table ends up looking like this: - * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, - * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), - * 0,1,...,CENTERJSAMPLE-1 - * Negative inputs select values from the upper half of the table after - * masking. - * - * We can save some space by overlapping the start of the post-IDCT table - * with the simpler range limiting table. The post-IDCT table begins at - * sample_range_limit + CENTERJSAMPLE. - * - * Note that the table is allocated in near data space on PCs; it's small - * enough and used often enough to justify this. - */ - -LOCAL(void) -prepare_range_limit_table (j_decompress_ptr cinfo) -/* Allocate and fill in the sample_range_limit table */ -{ - JSAMPLE * table; - int i; - - table = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ - cinfo->sample_range_limit = table; - /* First segment of "simple" table: limit[x] = 0 for x < 0 */ - MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); - /* Main part of "simple" table: limit[x] = x */ - for (i = 0; i <= MAXJSAMPLE; i++) - table[i] = (JSAMPLE) i; - table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ - /* End of simple table, rest of first half of post-IDCT table */ - for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) - table[i] = MAXJSAMPLE; - /* Second half of post-IDCT table */ - MEMZERO(table + (2 * (MAXJSAMPLE+1)), - (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); - MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), - cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); -} - - -/* - * Master selection of decompression modules. - * This is done once at jpeg_start_decompress time. We determine - * which modules will be used and give them appropriate initialization calls. - * We also initialize the decompressor input side to begin consuming data. - * - * Since jpeg_read_header has finished, we know what is in the SOF - * and (first) SOS markers. We also have all the application parameter - * settings. - */ - -LOCAL(void) -master_selection (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - boolean use_c_buffer; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Initialize dimensions and other stuff */ - jpeg_calc_output_dimensions(cinfo); - prepare_range_limit_table(cinfo); - - /* Width of an output scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* Initialize my private state */ - master->pass_number = 0; - master->using_merged_upsample = use_merged_upsample(cinfo); - - /* Color quantizer selection */ - master->quantizer_1pass = NULL; - master->quantizer_2pass = NULL; - /* No mode changes if not using buffered-image mode. */ - if (! cinfo->quantize_colors || ! cinfo->buffered_image) { - cinfo->enable_1pass_quant = FALSE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - } - if (cinfo->quantize_colors) { - if (cinfo->raw_data_out) - ERREXIT(cinfo, JERR_NOTIMPL); - /* 2-pass quantizer only works in 3-component color space. */ - if (cinfo->out_color_components != 3) { - cinfo->enable_1pass_quant = TRUE; - cinfo->enable_external_quant = FALSE; - cinfo->enable_2pass_quant = FALSE; - cinfo->colormap = NULL; - } else if (cinfo->colormap != NULL) { - cinfo->enable_external_quant = TRUE; - } else if (cinfo->two_pass_quantize) { - cinfo->enable_2pass_quant = TRUE; - } else { - cinfo->enable_1pass_quant = TRUE; - } - - if (cinfo->enable_1pass_quant) { -#ifdef QUANT_1PASS_SUPPORTED - jinit_1pass_quantizer(cinfo); - master->quantizer_1pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - - /* We use the 2-pass code to map to external colormaps. */ - if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { -#ifdef QUANT_2PASS_SUPPORTED - jinit_2pass_quantizer(cinfo); - master->quantizer_2pass = cinfo->cquantize; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } - /* If both quantizers are initialized, the 2-pass one is left active; - * this is necessary for starting with quantization to an external map. - */ - } - - /* Post-processing: in particular, color conversion first */ - if (! cinfo->raw_data_out) { - if (master->using_merged_upsample) { -#ifdef UPSAMPLE_MERGING_SUPPORTED - jinit_merged_upsampler(cinfo); /* does color conversion too */ -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - jinit_color_deconverter(cinfo); - jinit_upsampler(cinfo); - } - jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); - } - /* Inverse DCT */ - jinit_inverse_dct(cinfo); - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else - jinit_huff_decoder(cinfo); - } - - /* Initialize principal buffer controllers. */ - use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; - jinit_d_coef_controller(cinfo, use_c_buffer); - - if (! cinfo->raw_data_out) - jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - -#ifdef D_MULTISCAN_FILES_SUPPORTED - /* If jpeg_start_decompress will read the whole file, initialize - * progress monitoring appropriately. The input step is counted - * as one pass. - */ - if (cinfo->progress != NULL && ! cinfo->buffered_image && - cinfo->inputctl->has_multiple_scans) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); - /* Count the input pass as done */ - master->pass_number++; - } -#endif /* D_MULTISCAN_FILES_SUPPORTED */ -} - - -/* - * Per-pass setup. - * This is called at the beginning of each output pass. We determine which - * modules will be active during this pass and give them appropriate - * start_pass calls. We also set is_dummy_pass to indicate whether this - * is a "real" output pass or a dummy pass for color quantization. - * (In the latter case, jdapistd.c will crank the pass to completion.) - */ - -METHODDEF(void) -prepare_for_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (master->pub.is_dummy_pass) { -#ifdef QUANT_2PASS_SUPPORTED - /* Final pass of 2-pass quantization */ - master->pub.is_dummy_pass = FALSE; - (*cinfo->cquantize->start_pass) (cinfo, FALSE); - (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); - (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - if (cinfo->quantize_colors && cinfo->colormap == NULL) { - /* Select new quantization method */ - if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { - cinfo->cquantize = master->quantizer_2pass; - master->pub.is_dummy_pass = TRUE; - } else if (cinfo->enable_1pass_quant) { - cinfo->cquantize = master->quantizer_1pass; - } else { - ERREXIT(cinfo, JERR_MODE_CHANGE); - } - } - (*cinfo->idct->start_pass) (cinfo); - (*cinfo->coef->start_output_pass) (cinfo); - if (! cinfo->raw_data_out) { - if (! master->using_merged_upsample) - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->upsample->start_pass) (cinfo); - if (cinfo->quantize_colors) - (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); - (*cinfo->post->start_pass) (cinfo, - (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - } - } - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->pass_number + - (master->pub.is_dummy_pass ? 2 : 1); - /* In buffered-image mode, we assume one more output pass if EOI not - * yet reached, but no more passes if EOI has been reached. - */ - if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { - cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); - } - } -} - - -/* - * Finish up at end of an output pass. - */ - -METHODDEF(void) -finish_output_pass (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - if (cinfo->quantize_colors) - (*cinfo->cquantize->finish_pass) (cinfo); - master->pass_number++; -} - - -#ifdef D_MULTISCAN_FILES_SUPPORTED - -/* - * Switch to a new external colormap between output passes. - */ - -GLOBAL(void) -jpeg_new_colormap (j_decompress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* Prevent application from calling me at wrong times */ - if (cinfo->global_state != DSTATE_BUFIMAGE) - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - - if (cinfo->quantize_colors && cinfo->enable_external_quant && - cinfo->colormap != NULL) { - /* Select 2-pass quantizer for external colormap use */ - cinfo->cquantize = master->quantizer_2pass; - /* Notify quantizer of colormap change */ - (*cinfo->cquantize->new_color_map) (cinfo); - master->pub.is_dummy_pass = FALSE; /* just in case */ - } else - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - -#endif /* D_MULTISCAN_FILES_SUPPORTED */ - - -/* - * Initialize master decompression control and select active modules. - * This is performed at the start of jpeg_start_decompress. - */ - -GLOBAL(void) -jinit_master_decompress (j_decompress_ptr cinfo) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_decomp_master)); - cinfo->master = (struct jpeg_decomp_master *) master; - master->pub.prepare_for_output_pass = prepare_for_output_pass; - master->pub.finish_output_pass = finish_output_pass; - - master->pub.is_dummy_pass = FALSE; - - master_selection(cinfo); -} diff --git a/libjpegtwrp/jdmerge.c b/libjpegtwrp/jdmerge.c deleted file mode 100644 index 171fbd3ab..000000000 --- a/libjpegtwrp/jdmerge.c +++ /dev/null @@ -1,902 +0,0 @@ -/* - * jdmerge.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains code for merged upsampling/color conversion. - * - * This file combines functions from jdsample.c and jdcolor.c; - * read those files first to understand what's going on. - * - * When the chroma components are to be upsampled by simple replication - * (ie, box filtering), we can save some work in color conversion by - * calculating all the output pixels corresponding to a pair of chroma - * samples at one time. In the conversion equations - * R = Y + K1 * Cr - * G = Y + K2 * Cb + K3 * Cr - * B = Y + K4 * Cb - * only the Y term varies among the group of pixels corresponding to a pair - * of chroma samples, so the rest of the terms can be calculated just once. - * At typical sampling ratios, this eliminates half or three-quarters of the - * multiplications needed for color conversion. - * - * This file currently provides implementations for the following cases: - * YCbCr => RGB color conversion only. - * Sampling ratios of 2h1v or 2h2v. - * No scaling needed at upsample time. - * Corner-aligned (non-CCIR601) sampling alignment. - * Other special cases could be added, but in most applications these are - * the only common cases. (For uncommon cases we fall back on the more - * general code in jdsample.c and jdcolor.c.) - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef UPSAMPLE_MERGING_SUPPORTED - -#ifdef ANDROID_RGB - -/* Declarations for ordered dithering. - * - * We use 4x4 ordered dither array packed into 32 bits. This array is - * sufficent for dithering RGB_888 to RGB_565. - */ - -#define DITHER_MASK 0x3 -#define DITHER_ROTATE(x) (((x)<<24) | (((x)>>8)&0x00FFFFFF)) -static const INT32 dither_matrix[4] = { - 0x0008020A, - 0x0C040E06, - 0x030B0109, - 0x0F070D05 -}; - -#endif - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Pointer to routine to do actual upsampling/conversion of one row group */ - JMETHOD(void, upmethod, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf)); - - /* Private state for YCC->RGB conversion */ - int * Cr_r_tab; /* => table for Cr to R conversion */ - int * Cb_b_tab; /* => table for Cb to B conversion */ - INT32 * Cr_g_tab; /* => table for Cr to G conversion */ - INT32 * Cb_g_tab; /* => table for Cb to G conversion */ - - /* For 2:1 vertical sampling, we produce two output rows at a time. - * We need a "spare" row buffer to hold the second output row if the - * application provides just a one-row buffer; we also use the spare - * to discard the dummy last row if the image height is odd. - */ - JSAMPROW spare_row; - boolean spare_full; /* T if spare buffer is occupied */ - - JDIMENSION out_row_width; /* samples per output row */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - -#define SCALEBITS 16 /* speediest right-shift on some machines */ -#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) -#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. - * This is taken directly from jdcolor.c; see that file for more info. - */ - -LOCAL(void) -build_ycc_rgb_table (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int i; - INT32 x; - SHIFT_TEMPS - - upsample->Cr_r_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cb_b_tab = (int *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(int)); - upsample->Cr_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - upsample->Cb_g_tab = (INT32 *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (MAXJSAMPLE+1) * SIZEOF(INT32)); - - for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { - /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ - /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ - /* Cr=>R value is nearest int to 1.40200 * x */ - upsample->Cr_r_tab[i] = (int) - RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); - /* Cb=>B value is nearest int to 1.77200 * x */ - upsample->Cb_b_tab[i] = (int) - RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); - /* Cr=>G value is scaled-up -0.71414 * x */ - upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; - /* Cb=>G value is scaled-up -0.34414 * x */ - /* We also add in ONE_HALF so that need not do it in inner loop */ - upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; - } -} - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF(void) -start_pass_merged_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the spare buffer empty */ - upsample->spare_full = FALSE; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * The control routine just handles the row buffering considerations. - */ - -METHODDEF(void) -merged_2v_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -/* 2:1 vertical sampling case: may need a spare row. */ -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW work_ptrs[2]; - JDIMENSION num_rows; /* number of rows returned to caller */ - - if (upsample->spare_full) { - /* If we have a spare row saved from a previous cycle, just return it. */ - JDIMENSION size = upsample->out_row_width; -#ifdef ANDROID_RGB - if (cinfo->out_color_space == JCS_RGB_565) - size = cinfo->output_width*2; -#endif - jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, - 1, size); - - num_rows = 1; - upsample->spare_full = FALSE; - } else { - /* Figure number of rows to return to caller. */ - num_rows = 2; - /* Not more than the distance to the end of the image. */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - /* Create output pointer array for upsampler. */ - work_ptrs[0] = output_buf[*out_row_ctr]; - if (num_rows > 1) { - work_ptrs[1] = output_buf[*out_row_ctr + 1]; - } else { - work_ptrs[1] = upsample->spare_row; - upsample->spare_full = TRUE; - } - /* Now do the upsampling. */ - (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); - } - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (! upsample->spare_full) - (*in_row_group_ctr)++; -} - - -METHODDEF(void) -merged_1v_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -/* 1:1 vertical sampling case: much easier, never need a spare row. */ -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Just do the upsampling. */ - (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, - output_buf + *out_row_ctr); - /* Adjust counts */ - (*out_row_ctr)++; - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by the control routines to do - * the actual upsampling/conversion. One row group is processed per call. - * - * Note: since we may be writing directly into application-supplied buffers, - * we have to be honest about the output width; we can't assume the buffer - * has been rounded up to an even width. - */ - - -/* - * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. - */ - -METHODDEF(void) -h2v1_merged_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -#ifdef ANDROID_JPEG_USE_VENUM -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW inptr0, inptr1, inptr2; - JSAMPROW outptr; - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - -#ifdef ANDROID_RGB - if (cinfo->out_color_space == JCS_RGBA_8888) { - yyvup2abgr8888_venum((UINT8*) inptr0, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr, - cinfo->output_width); - } else -#endif - { - yyvup2bgr888_venum((UINT8*) inptr0, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr, - cinfo->output_width); - } -} -#else -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr; - JSAMPROW inptr0, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - JDIMENSION pixelWidth = RGB_PIXELSIZE; - SHIFT_TEMPS - -#ifdef ANDROID_RGB - if ((cinfo->out_color_components == 4) && - (cinfo->out_color_space == JCS_RGBA_8888)) - pixelWidth = 4; // RGBA pixel size -#endif /* ANDROID_RGB */ - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - /* Loop for each pair of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 2 Y values and emit 2 pixels */ - y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - outptr += pixelWidth; - y = GETJSAMPLE(*inptr0++); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - outptr += pixelWidth; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr0); - outptr[RGB_RED] = range_limit[y + cred]; - outptr[RGB_GREEN] = range_limit[y + cgreen]; - outptr[RGB_BLUE] = range_limit[y + cblue]; - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - - -#ifdef ANDROID_RGB -METHODDEF(void) -h2v1_merged_upsample_565 (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -#if defined(ANDROID_JPEG_USE_VENUM) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW inptr0, inptr1, inptr2; - JSAMPROW outptr; - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - - yyvup2rgb565_venum((UINT8*) inptr0, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr, - cinfo->output_width); -} -#else -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr; - JSAMPROW inptr0, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - unsigned int r, g, b; - INT32 rgb; - SHIFT_TEMPS - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - /* Loop for each pair of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 2 Y values and emit 2 pixels */ - y = GETJSAMPLE(*inptr0++); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr0++); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_PIXELS(outptr, rgb); - outptr += 4; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr0); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - - -METHODDEF(void) -h2v1_merged_upsample_565D (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr; - JSAMPROW inptr0, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - JDIMENSION col_index = 0; - INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK]; - unsigned int r, g, b; - INT32 rgb; - SHIFT_TEMPS - - inptr0 = input_buf[0][in_row_group_ctr]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr = output_buf[0]; - /* Loop for each pair of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 2 Y values and emit 2 pixels */ - y = GETJSAMPLE(*inptr0++); - r = range_limit[DITHER_565_R(y + cred, d0)]; - g = range_limit[DITHER_565_G(y + cgreen, d0)]; - b = range_limit[DITHER_565_B(y + cblue, d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr0++); - r = range_limit[DITHER_565_R(y + cred, d0)]; - g = range_limit[DITHER_565_G(y + cgreen, d0)]; - b = range_limit[DITHER_565_B(y + cblue, d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_PIXELS(outptr, rgb); - outptr += 4; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr0); - r = range_limit[DITHER_565_R(y + cred, d0)]; - g = range_limit[DITHER_565_G(y + cgreen, d0)]; - b = range_limit[DITHER_565_B(y + cblue, d0)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr = rgb; - } -} - - -#endif - -/* - * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. - */ - -METHODDEF(void) -h2v2_merged_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -#ifdef ANDROID_JPEG_USE_VENUM -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; -#ifdef ANDROID_RGB - if (cinfo->out_color_space == JCS_RGBA_8888) { - yyvup2abgr8888_venum((UINT8*) inptr00, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr0, - cinfo->output_width); - yyvup2abgr8888_venum((UINT8*) inptr01, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr1, - cinfo->output_width); - } else -#endif - { - yyvup2bgr888_venum((UINT8*) inptr00, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr0, - cinfo->output_width); - - yyvup2bgr888_venum((UINT8*) inptr01, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr1, - cinfo->output_width); - } -} -#else -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - JDIMENSION pixelWidth = RGB_PIXELSIZE; - SHIFT_TEMPS - -#ifdef ANDROID_RGB - if ((cinfo->out_color_components == 4) && - (cinfo->out_color_space == JCS_RGBA_8888)) - pixelWidth = 4; // RGBA pixel size -#endif /* ANDROID_RGB */ - - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; - /* Loop for each group of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 4 Y values and emit 4 pixels */ - y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - outptr0 += pixelWidth; - y = GETJSAMPLE(*inptr00++); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - outptr0 += pixelWidth; - y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - outptr1 += pixelWidth; - y = GETJSAMPLE(*inptr01++); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - outptr1 += pixelWidth; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr00); - outptr0[RGB_RED] = range_limit[y + cred]; - outptr0[RGB_GREEN] = range_limit[y + cgreen]; - outptr0[RGB_BLUE] = range_limit[y + cblue]; - y = GETJSAMPLE(*inptr01); - outptr1[RGB_RED] = range_limit[y + cred]; - outptr1[RGB_GREEN] = range_limit[y + cgreen]; - outptr1[RGB_BLUE] = range_limit[y + cblue]; - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - - -#ifdef ANDROID_RGB - -METHODDEF(void) -h2v2_merged_upsample_565 (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -#if defined(ANDROID_JPEG_USE_VENUM) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; - - yyvup2rgb565_venum((UINT8*) inptr00, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr0, - cinfo->output_width); - - yyvup2rgb565_venum((UINT8*) inptr01, - (UINT8*) inptr2, - (UINT8*) inptr1, - (UINT8*) outptr1, - cinfo->output_width); -} -#else -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - unsigned int r, g, b; - INT32 rgb; - SHIFT_TEMPS - - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; - /* Loop for each group of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 4 Y values and emit 4 pixels */ - y = GETJSAMPLE(*inptr00++); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr00++); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_PIXELS(outptr0, rgb); - outptr0 += 4; - y = GETJSAMPLE(*inptr01++); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr01++); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_PIXELS(outptr1, rgb); - outptr1 += 4; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr00); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr0 = rgb; - y = GETJSAMPLE(*inptr01); - r = range_limit[y + cred]; - g = range_limit[y + cgreen]; - b = range_limit[y + cblue]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr1 = rgb; - } -} -#endif /* ANDROID_JPEG_USE_VENUM */ - - -METHODDEF(void) -h2v2_merged_upsample_565D (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, - JSAMPARRAY output_buf) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - register int y, cred, cgreen, cblue; - int cb, cr; - register JSAMPROW outptr0, outptr1; - JSAMPROW inptr00, inptr01, inptr1, inptr2; - JDIMENSION col; - /* copy these pointers into registers if possible */ - register JSAMPLE * range_limit = cinfo->sample_range_limit; - int * Crrtab = upsample->Cr_r_tab; - int * Cbbtab = upsample->Cb_b_tab; - INT32 * Crgtab = upsample->Cr_g_tab; - INT32 * Cbgtab = upsample->Cb_g_tab; - JDIMENSION col_index = 0; - INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK]; - INT32 d1 = dither_matrix[(cinfo->output_scanline+1) & DITHER_MASK]; - unsigned int r, g, b; - INT32 rgb; - SHIFT_TEMPS - - inptr00 = input_buf[0][in_row_group_ctr*2]; - inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; - inptr1 = input_buf[1][in_row_group_ctr]; - inptr2 = input_buf[2][in_row_group_ctr]; - outptr0 = output_buf[0]; - outptr1 = output_buf[1]; - /* Loop for each group of output pixels */ - for (col = cinfo->output_width >> 1; col > 0; col--) { - - /* Do the chroma part of the calculation */ - cb = GETJSAMPLE(*inptr1++); - cr = GETJSAMPLE(*inptr2++); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - /* Fetch 4 Y values and emit 4 pixels */ - y = GETJSAMPLE(*inptr00++); - r = range_limit[DITHER_565_R(y + cred, d0)]; - g = range_limit[DITHER_565_G(y + cgreen, d0)]; - b = range_limit[DITHER_565_B(y + cblue, d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr00++); - r = range_limit[DITHER_565_R(y + cred, d1)]; - g = range_limit[DITHER_565_G(y + cgreen, d1)]; - b = range_limit[DITHER_565_B(y + cblue, d1)]; - d1 = DITHER_ROTATE(d1); - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_PIXELS(outptr0, rgb); - outptr0 += 4; - y = GETJSAMPLE(*inptr01++); - r = range_limit[DITHER_565_R(y + cred, d0)]; - g = range_limit[DITHER_565_G(y + cgreen, d0)]; - b = range_limit[DITHER_565_B(y + cblue, d0)]; - d0 = DITHER_ROTATE(d0); - rgb = PACK_SHORT_565(r,g,b); - y = GETJSAMPLE(*inptr01++); - r = range_limit[DITHER_565_R(y + cred, d1)]; - g = range_limit[DITHER_565_G(y + cgreen, d1)]; - b = range_limit[DITHER_565_B(y + cblue, d1)]; - d1 = DITHER_ROTATE(d1); - rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b)); - WRITE_TWO_PIXELS(outptr1, rgb); - outptr1 += 4; - } - /* If image width is odd, do the last output column separately */ - if (cinfo->output_width & 1) { - cb = GETJSAMPLE(*inptr1); - cr = GETJSAMPLE(*inptr2); - cred = Crrtab[cr]; - cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); - cblue = Cbbtab[cb]; - y = GETJSAMPLE(*inptr00); - r = range_limit[DITHER_565_R(y + cred, d0)]; - g = range_limit[DITHER_565_G(y + cgreen, d0)]; - b = range_limit[DITHER_565_B(y + cblue, d0)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr0 = rgb; - y = GETJSAMPLE(*inptr01); - r = range_limit[DITHER_565_R(y + cred, d1)]; - g = range_limit[DITHER_565_G(y + cgreen, d1)]; - b = range_limit[DITHER_565_B(y + cblue, d1)]; - rgb = PACK_SHORT_565(r,g,b); - *(INT16*)outptr1 = rgb; - } -} - -#endif - -/* - * Module initialization routine for merged upsampling/color conversion. - * - * NB: this is called under the conditions determined by use_merged_upsample() - * in jdmaster.c. That routine MUST correspond to the actual capabilities - * of this module; no safety checks are made here. - */ - -GLOBAL(void) -jinit_merged_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_merged_upsample; - upsample->pub.need_context_rows = FALSE; - - upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; - - if (cinfo->max_v_samp_factor == 2) { - upsample->pub.upsample = merged_2v_upsample; - upsample->upmethod = h2v2_merged_upsample; -#ifdef ANDROID_RGB - if (cinfo->out_color_space == JCS_RGB_565) { -#if !defined(ANDROID_JPEG_USE_VENUM) - if (cinfo->dither_mode != JDITHER_NONE) { - upsample->upmethod = h2v2_merged_upsample_565D; - } else -#endif - { - /* If VeNum routines are enabled, use h2v2_merged_upsample_565 - * function regardless of dither mode. */ - upsample->upmethod = h2v2_merged_upsample_565; - } - } -#endif - /* Allocate a spare row buffer */ - upsample->spare_row = (JSAMPROW) - (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); - } else { - upsample->pub.upsample = merged_1v_upsample; - upsample->upmethod = h2v1_merged_upsample; -#ifdef ANDROID_RGB - if (cinfo->out_color_space == JCS_RGB_565) { -#ifndef ANDROID_JPEG_USE_VENUM - if (cinfo->dither_mode != JDITHER_NONE) { - upsample->upmethod = h2v1_merged_upsample_565D; - } else -#endif - { - /* If VeNum routines are enabled, use h2v1_merged_upsample_565 - * function regardless of dither mode. */ - upsample->upmethod = h2v1_merged_upsample_565; - } - } -#endif - /* No spare row needed */ - upsample->spare_row = NULL; - } - -#if !defined(ANDROID_JPEG_USE_VENUM) - build_ycc_rgb_table(cinfo); -#endif -#ifdef NEEDS_ARM_ERRATA_754319_754320 - asm volatile ( "vmov s0,s0\n" ); -#endif -} - -#endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/libjpegtwrp/jdphuff.c b/libjpegtwrp/jdphuff.c deleted file mode 100644 index 2f856e07b..000000000 --- a/libjpegtwrp/jdphuff.c +++ /dev/null @@ -1,770 +0,0 @@ -/* - * jdphuff.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains Huffman entropy decoding routines for progressive JPEG. - * - * Much of the complexity here has to do with supporting input suspension. - * If the data source module demands suspension, we want to be able to back - * up to the start of the current MCU. To do this, we copy state variables - * into local working storage, and update them back to the permanent - * storage only upon successful completion of an MCU. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdhuff.h" /* Declarations shared with jdhuff.c */ - - -#ifdef D_PROGRESSIVE_SUPPORTED - -/* - * Expanded entropy decoder object for progressive Huffman decoding. - * - * The savable_state subrecord contains fields that change within an MCU, - * but must not be updated permanently until we complete the MCU. - */ - -typedef struct { - unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ - int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ -} savable_state; - -/* This macro is to work around compilers with missing or broken - * structure assignment. You'll need to fix this code if you have - * such a compiler and you change MAX_COMPS_IN_SCAN. - */ - -#ifndef NO_STRUCT_ASSIGN -#define ASSIGN_STATE(dest,src) ((dest) = (src)) -#else -#if MAX_COMPS_IN_SCAN == 4 -#define ASSIGN_STATE(dest,src) \ - ((dest).EOBRUN = (src).EOBRUN, \ - (dest).last_dc_val[0] = (src).last_dc_val[0], \ - (dest).last_dc_val[1] = (src).last_dc_val[1], \ - (dest).last_dc_val[2] = (src).last_dc_val[2], \ - (dest).last_dc_val[3] = (src).last_dc_val[3]) -#endif -#endif - - -typedef struct { - struct jpeg_entropy_decoder pub; /* public fields */ - - /* These fields are loaded into local variables at start of each MCU. - * In case of suspension, we exit WITHOUT updating them. - */ - bitread_perm_state bitstate; /* Bit buffer at start of MCU */ - savable_state saved; /* Other state at start of MCU */ - - /* These fields are NOT loaded into local working state. */ - unsigned int restarts_to_go; /* MCUs left in this restart interval */ - - /* Pointers to derived tables (these workspaces have image lifespan) */ - d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; - - d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ -} phuff_entropy_decoder; - -typedef phuff_entropy_decoder * phuff_entropy_ptr; - -/* Forward declarations */ -METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); -METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); - -/* - * Initialize for a Huffman-compressed scan. - */ - -METHODDEF(void) -start_pass_phuff_decoder (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - boolean is_DC_band, bad; - int ci, coefi, tbl; - int *coef_bit_ptr; - jpeg_component_info * compptr; - - is_DC_band = (cinfo->Ss == 0); - - /* Validate scan parameters */ - bad = FALSE; - if (is_DC_band) { - if (cinfo->Se != 0) - bad = TRUE; - } else { - /* need not check Ss/Se < 0 since they came from unsigned bytes */ - if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2) - bad = TRUE; - /* AC scans may have only one component */ - if (cinfo->comps_in_scan != 1) - bad = TRUE; - } - if (cinfo->Ah != 0) { - /* Successive approximation refinement scan: must have Al = Ah-1. */ - if (cinfo->Al != cinfo->Ah-1) - bad = TRUE; - } - if (cinfo->Al > 13) /* need not check for < 0 */ - bad = TRUE; - /* Arguably the maximum Al value should be less than 13 for 8-bit precision, - * but the spec doesn't say so, and we try to be liberal about what we - * accept. Note: large Al values could result in out-of-range DC - * coefficients during early scans, leading to bizarre displays due to - * overflows in the IDCT math. But we won't crash. - */ - if (bad) - ERREXIT4(cinfo, JERR_BAD_PROGRESSION, - cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); - /* Update progression status, and verify that scan order is legal. - * Note that inter-scan inconsistencies are treated as warnings - * not fatal errors ... not clear if this is right way to behave. - */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - int cindex = cinfo->cur_comp_info[ci]->component_index; - coef_bit_ptr = & cinfo->coef_bits[cindex][0]; - if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); - for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { - int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; - if (cinfo->Ah != expected) - WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); - coef_bit_ptr[coefi] = cinfo->Al; - } - } - - /* Select MCU decoding routine */ - if (cinfo->Ah == 0) { - if (is_DC_band) - entropy->pub.decode_mcu = decode_mcu_DC_first; - else - entropy->pub.decode_mcu = decode_mcu_AC_first; - } else { - if (is_DC_band) - entropy->pub.decode_mcu = decode_mcu_DC_refine; - else - entropy->pub.decode_mcu = decode_mcu_AC_refine; - } - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Make sure requested tables are present, and compute derived tables. - * We may build same derived table more than once, but it's not expensive. - */ - if (is_DC_band) { - if (cinfo->Ah == 0) { /* DC refinement needs no table */ - tbl = compptr->dc_tbl_no; - jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, - & entropy->derived_tbls[tbl]); - } - } else { - tbl = compptr->ac_tbl_no; - jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, - & entropy->derived_tbls[tbl]); - /* remember the single active table */ - entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; - } - /* Initialize DC predictions to 0 */ - entropy->saved.last_dc_val[ci] = 0; - } - - /* Initialize bitread state variables */ - entropy->bitstate.bits_left = 0; - entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ - entropy->pub.insufficient_data = FALSE; - - /* Initialize private state variables */ - entropy->saved.EOBRUN = 0; - - /* Initialize restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; -} - - -/* - * Figure F.12: extend sign bit. - * On some machines, a shift and add will be faster than a table lookup. - */ - -#ifdef AVOID_TABLES - -#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) - -#else - -#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) - -static const int extend_test[16] = /* entry n is 2**(n-1) */ - { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, - 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; - -static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ - { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, - ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, - ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, - ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; - -#endif /* AVOID_TABLES */ - - -/* - * Check for a restart marker & resynchronize decoder. - * Returns FALSE if must suspend. - */ - -LOCAL(boolean) -process_restart (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int ci; - - /* Throw away any unused bits remaining in bit buffer; */ - /* include any full bytes in next_marker's count of discarded bytes */ - cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; - entropy->bitstate.bits_left = 0; - - /* Advance past the RSTn marker */ - if (! (*cinfo->marker->read_restart_marker) (cinfo)) - return FALSE; - - /* Re-initialize DC predictions to 0 */ - for (ci = 0; ci < cinfo->comps_in_scan; ci++) - entropy->saved.last_dc_val[ci] = 0; - /* Re-init EOB run count, too */ - entropy->saved.EOBRUN = 0; - - /* Reset restart counter */ - entropy->restarts_to_go = cinfo->restart_interval; - - /* Reset out-of-data flag, unless read_restart_marker left us smack up - * against a marker. In that case we will end up treating the next data - * segment as empty, and we can avoid producing bogus output pixels by - * leaving the flag set. - */ - if (cinfo->unread_marker == 0) - entropy->pub.insufficient_data = FALSE; - - return TRUE; -} - - -/* - * Huffman MCU decoding. - * Each of these routines decodes and returns one MCU's worth of - * Huffman-compressed coefficients. - * The coefficients are reordered from zigzag order into natural array order, - * but are not dequantized. - * - * The i'th block of the MCU is stored into the block pointed to by - * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. - * - * We return FALSE if data source requested suspension. In that case no - * changes have been made to permanent state. (Exception: some output - * coefficients may already have been assigned. This is harmless for - * spectral selection, since we'll just re-assign them on the next call. - * Successive approximation AC refinement has to be more careful, however.) - */ - -/* - * MCU decoding for DC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Al = cinfo->Al; - register int s, r; - int blkn, ci; - JBLOCKROW block; - BITREAD_STATE_VARS; - savable_state state; - d_derived_tbl * tbl; - jpeg_component_info * compptr; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(state, entropy->saved); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - ci = cinfo->MCU_membership[blkn]; - compptr = cinfo->cur_comp_info[ci]; - tbl = entropy->derived_tbls[compptr->dc_tbl_no]; - - /* Decode a single block's worth of coefficients */ - - /* Section F.2.2.1: decode the DC coefficient difference */ - HUFF_DECODE(s, br_state, tbl, return FALSE, label1); - if (s) { - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - } - - /* Convert DC difference to actual value, update last_dc_val */ - s += state.last_dc_val[ci]; - state.last_dc_val[ci] = s; - /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ - (*block)[0] = (JCOEF) (s << Al); - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - ASSIGN_STATE(entropy->saved, state); - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC initial scan (either spectral selection, - * or first pass of successive approximation). - */ - -METHODDEF(boolean) -decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Se = cinfo->Se; - int Al = cinfo->Al; - register int s, k, r; - unsigned int EOBRUN; - JBLOCKROW block; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, just leave the MCU set to zeroes. - * This way, we return uniform gray for the remainder of the segment. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state. - * We can avoid loading/saving bitread state if in an EOB run. - */ - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ - - /* There is always only one block per MCU */ - - if (EOBRUN > 0) /* if it's a band of zeroes... */ - EOBRUN--; /* ...process it now (we do nothing) */ - else { - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - for (k = cinfo->Ss; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, return FALSE, label2); - r = s >> 4; - s &= 15; - if (s) { - k += r; - CHECK_BIT_BUFFER(br_state, s, return FALSE); - r = GET_BITS(s); - s = HUFF_EXTEND(r, s); - /* Scale and output coefficient in natural (dezigzagged) order */ - (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al); - } else { - if (r == 15) { /* ZRL */ - k += 15; /* skip 15 zeroes in band */ - } else { /* EOBr, run length is 2^r + appended bits */ - EOBRUN = 1 << r; - if (r) { /* EOBr, r > 0 */ - CHECK_BIT_BUFFER(br_state, r, return FALSE); - r = GET_BITS(r); - EOBRUN += r; - } - EOBRUN--; /* this band is processed at this moment */ - break; /* force end-of-band */ - } - } - } - - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - } - - /* Completed MCU, so update state */ - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for DC successive approximation refinement scan. - * Note: we assume such scans can be multi-component, although the spec - * is not very clear on the point. - */ - -METHODDEF(boolean) -decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int blkn; - JBLOCKROW block; - BITREAD_STATE_VARS; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* Not worth the cycles to check insufficient_data here, - * since we will not change the data anyway if we read zeroes. - */ - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - - /* Outer loop handles each block in the MCU */ - - for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { - block = MCU_data[blkn]; - - /* Encoded data is simply the next bit of the two's-complement DC value */ - CHECK_BIT_BUFFER(br_state, 1, return FALSE); - if (GET_BITS(1)) - (*block)[0] |= p1; - /* Note: since we use |=, repeating the assignment later is safe */ - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; -} - - -/* - * MCU decoding for AC successive approximation refinement scan. - */ - -METHODDEF(boolean) -decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - int Se = cinfo->Se; - int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ - int m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ - register int s, k, r; - unsigned int EOBRUN; - JBLOCKROW block; - JCOEFPTR thiscoef; - BITREAD_STATE_VARS; - d_derived_tbl * tbl; - int num_newnz; - int newnz_pos[DCTSIZE2]; - - /* Process restart marker if needed; may have to suspend */ - if (cinfo->restart_interval) { - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return FALSE; - } - - /* If we've run out of data, don't modify the MCU. - */ - if (! entropy->pub.insufficient_data) { - - /* Load up working state */ - BITREAD_LOAD_STATE(cinfo,entropy->bitstate); - EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ - - /* There is always only one block per MCU */ - block = MCU_data[0]; - tbl = entropy->ac_derived_tbl; - - /* If we are forced to suspend, we must undo the assignments to any newly - * nonzero coefficients in the block, because otherwise we'd get confused - * next time about which coefficients were already nonzero. - * But we need not undo addition of bits to already-nonzero coefficients; - * instead, we can test the current bit to see if we already did it. - */ - num_newnz = 0; - - /* initialize coefficient loop counter to start of band */ - k = cinfo->Ss; - - if (EOBRUN == 0) { - for (; k <= Se; k++) { - HUFF_DECODE(s, br_state, tbl, goto undoit, label3); - r = s >> 4; - s &= 15; - if (s) { - if (s != 1) /* size of new coef should always be 1 */ - WARNMS(cinfo, JWRN_HUFF_BAD_CODE); - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) - s = p1; /* newly nonzero coef is positive */ - else - s = m1; /* newly nonzero coef is negative */ - } else { - if (r != 15) { - EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ - if (r) { - CHECK_BIT_BUFFER(br_state, r, goto undoit); - r = GET_BITS(r); - EOBRUN += r; - } - break; /* rest of block is handled by EOB logic */ - } - /* note s = 0 for processing ZRL */ - } - /* Advance over already-nonzero coefs and r still-zero coefs, - * appending correction bits to the nonzeroes. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - do { - thiscoef = *block + jpeg_natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } else { - if (--r < 0) - break; /* reached target zero coefficient */ - } - k++; - } while (k <= Se); - if (s) { - int pos = jpeg_natural_order[k]; - /* Output newly nonzero coefficient */ - (*block)[pos] = (JCOEF) s; - /* Remember its position in case we have to suspend */ - newnz_pos[num_newnz++] = pos; - } - } - } - - if (EOBRUN > 0) { - /* Scan any remaining coefficient positions after the end-of-band - * (the last newly nonzero coefficient, if any). Append a correction - * bit to each already-nonzero coefficient. A correction bit is 1 - * if the absolute value of the coefficient must be increased. - */ - for (; k <= Se; k++) { - thiscoef = *block + jpeg_natural_order[k]; - if (*thiscoef != 0) { - CHECK_BIT_BUFFER(br_state, 1, goto undoit); - if (GET_BITS(1)) { - if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ - if (*thiscoef >= 0) - *thiscoef += p1; - else - *thiscoef += m1; - } - } - } - } - /* Count one block completed in EOB run */ - EOBRUN--; - } - - /* Completed MCU, so update state */ - BITREAD_SAVE_STATE(cinfo,entropy->bitstate); - entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ - } - - /* Account for restart interval (no-op if not using restarts) */ - entropy->restarts_to_go--; - - return TRUE; - -undoit: - /* Re-zero any output coefficients that we made newly nonzero */ - while (num_newnz > 0) - (*block)[newnz_pos[--num_newnz]] = 0; - - return FALSE; -} - -/* - * Save the current Huffman decoder position and the bit buffer - * into bitstream_offset and get_buffer, respectively. - */ -GLOBAL(void) -jpeg_get_huffman_decoder_configuration_progressive(j_decompress_ptr cinfo, - huffman_offset_data *offset) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - - if (cinfo->restart_interval) { - // We are at the end of a data segment - if (entropy->restarts_to_go == 0) - if (! process_restart(cinfo)) - return; - } - - // Save restarts_to_go and next_restart_num. - offset->restarts_to_go = (unsigned short) entropy->restarts_to_go; - offset->next_restart_num = cinfo->marker->next_restart_num; - - offset->bitstream_offset = - (jget_input_stream_position(cinfo) << LOG_TWO_BIT_BUF_SIZE) - + entropy->bitstate.bits_left; - - offset->get_buffer = entropy->bitstate.get_buffer; -} - -/* - * Save the current Huffman deocde position and the DC coefficients - * for each component into bitstream_offset and dc_info[], respectively. - */ -METHODDEF(void) -get_huffman_decoder_configuration(j_decompress_ptr cinfo, - huffman_offset_data *offset) -{ - int i; - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - jpeg_get_huffman_decoder_configuration_progressive(cinfo, offset); - offset->EOBRUN = entropy->saved.EOBRUN; - for (i = 0; i < cinfo->comps_in_scan; i++) - offset->prev_dc[i] = entropy->saved.last_dc_val[i]; -} - -/* - * Configure the Huffman decoder reader position and bit buffer. - */ -GLOBAL(void) -jpeg_configure_huffman_decoder_progressive(j_decompress_ptr cinfo, - huffman_offset_data offset) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - - // Restore restarts_to_go and next_restart_num - cinfo->unread_marker = 0; - entropy->restarts_to_go = offset.restarts_to_go; - cinfo->marker->next_restart_num = offset.next_restart_num; - - unsigned int bitstream_offset = offset.bitstream_offset; - int blkn, i; - - unsigned int byte_offset = bitstream_offset >> LOG_TWO_BIT_BUF_SIZE; - unsigned int bit_in_bit_buffer = - bitstream_offset & ((1 << LOG_TWO_BIT_BUF_SIZE) - 1); - - jset_input_stream_position_bit(cinfo, byte_offset, - bit_in_bit_buffer, offset.get_buffer); -} - -/* - * Configure the Huffman decoder to decode the image - * starting from (iMCU_row_offset, iMCU_col_offset). - */ -METHODDEF(void) -configure_huffman_decoder(j_decompress_ptr cinfo, huffman_offset_data offset) -{ - int i; - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - jpeg_configure_huffman_decoder_progressive(cinfo, offset); - entropy->saved.EOBRUN = offset.EOBRUN; - for (i = 0; i < cinfo->comps_in_scan; i++) - entropy->saved.last_dc_val[i] = offset.prev_dc[i]; -} - -GLOBAL(void) -jpeg_configure_huffman_index_scan(j_decompress_ptr cinfo, - huffman_index *index, int scan_no, int offset) -{ - phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; - if (scan_no >= index->scan_count) { - index->scan = realloc(index->scan, - (scan_no + 1) * sizeof(huffman_scan_header)); - index->mem_used += (scan_no - index->scan_count + 1) - * (sizeof(huffman_scan_header) + cinfo->total_iMCU_rows - * sizeof(huffman_offset_data*)); - index->scan_count = scan_no + 1; - } - index->scan[scan_no].offset = (huffman_offset_data**)malloc( - cinfo->total_iMCU_rows * sizeof(huffman_offset_data*)); - index->scan[scan_no].bitstream_offset = offset; -} - -/* - * Module initialization routine for progressive Huffman entropy decoding. - */ -GLOBAL(void) -jinit_phuff_decoder (j_decompress_ptr cinfo) -{ - phuff_entropy_ptr entropy; - int *coef_bit_ptr; - int ci, i; - - entropy = (phuff_entropy_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(phuff_entropy_decoder)); - cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; - entropy->pub.start_pass = start_pass_phuff_decoder; - entropy->pub.configure_huffman_decoder = configure_huffman_decoder; - entropy->pub.get_huffman_decoder_configuration = - get_huffman_decoder_configuration; - - /* Mark derived tables unallocated */ - for (i = 0; i < NUM_HUFF_TBLS; i++) { - entropy->derived_tbls[i] = NULL; - } - - /* Create progression status table */ - cinfo->coef_bits = (int (*)[DCTSIZE2]) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->num_components*DCTSIZE2*SIZEOF(int)); - coef_bit_ptr = & cinfo->coef_bits[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (i = 0; i < DCTSIZE2; i++) - *coef_bit_ptr++ = -1; -} - -#endif /* D_PROGRESSIVE_SUPPORTED */ diff --git a/libjpegtwrp/jdpostct.c b/libjpegtwrp/jdpostct.c deleted file mode 100644 index 571563d72..000000000 --- a/libjpegtwrp/jdpostct.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * jdpostct.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the decompression postprocessing controller. - * This controller manages the upsampling, color conversion, and color - * quantization/reduction steps; specifically, it controls the buffering - * between upsample/color conversion and color quantization/reduction. - * - * If no color quantization/reduction is required, then this module has no - * work to do, and it just hands off to the upsample/color conversion code. - * An integrated upsample/convert/quantize process would replace this module - * entirely. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private buffer controller object */ - -typedef struct { - struct jpeg_d_post_controller pub; /* public fields */ - - /* Color quantization source buffer: this holds output data from - * the upsample/color conversion step to be passed to the quantizer. - * For two-pass color quantization, we need a full-image buffer; - * for one-pass operation, a strip buffer is sufficient. - */ - jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ - JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ - JDIMENSION strip_height; /* buffer size in rows */ - /* for two-pass mode only: */ - JDIMENSION starting_row; /* row # of first row in current strip */ - JDIMENSION next_row; /* index of next row to fill/empty in strip */ -} my_post_controller; - -typedef my_post_controller * my_post_ptr; - - -/* Forward declarations */ -METHODDEF(void) post_process_1pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#ifdef QUANT_2PASS_SUPPORTED -METHODDEF(void) post_process_prepass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -METHODDEF(void) post_process_2pass - JPP((j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -#endif - - -/* - * Initialize for a processing pass. - */ - -METHODDEF(void) -start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - - switch (pass_mode) { - case JBUF_PASS_THRU: - if (cinfo->quantize_colors) { - /* Single-pass processing with color quantization. */ - post->pub.post_process_data = post_process_1pass; - /* We could be doing buffered-image output before starting a 2-pass - * color quantization; in that case, jinit_d_post_controller did not - * allocate a strip buffer. Use the virtual-array buffer as workspace. - */ - if (post->buffer == NULL) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - (JDIMENSION) 0, post->strip_height, TRUE); - } - } else { - /* For single-pass processing without color quantization, - * I have no work to do; just call the upsampler directly. - */ - post->pub.post_process_data = cinfo->upsample->upsample; - } - break; -#ifdef QUANT_2PASS_SUPPORTED - case JBUF_SAVE_AND_PASS: - /* First pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_prepass; - break; - case JBUF_CRANK_DEST: - /* Second pass of 2-pass quantization */ - if (post->whole_image == NULL) - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - post->pub.post_process_data = post_process_2pass; - break; -#endif /* QUANT_2PASS_SUPPORTED */ - default: - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); - break; - } - post->starting_row = post->next_row = 0; -} - - -/* - * Process some data in the one-pass (strip buffer) case. - * This is used for color precision reduction as well as one-pass quantization. - */ - -METHODDEF(void) -post_process_1pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Fill the buffer, but not more than what we can dump out in one go. */ - /* Note we rely on the upsampler to detect bottom of image. */ - max_rows = out_rows_avail - *out_row_ctr; - if (max_rows > post->strip_height) - max_rows = post->strip_height; - num_rows = 0; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &num_rows, max_rows); - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer, output_buf + *out_row_ctr, (int) num_rows); - *out_row_ctr += num_rows; -} - - -#ifdef QUANT_2PASS_SUPPORTED - -/* - * Process some data in the first pass of 2-pass quantization. - */ - -METHODDEF(void) -post_process_prepass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION old_next_row, num_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, TRUE); - } - - /* Upsample some data (up to a strip height's worth). */ - old_next_row = post->next_row; - (*cinfo->upsample->upsample) (cinfo, - input_buf, in_row_group_ctr, in_row_groups_avail, - post->buffer, &post->next_row, post->strip_height); - - /* Allow quantizer to scan new data. No data is emitted, */ - /* but we advance out_row_ctr so outer loop can tell when we're done. */ - if (post->next_row > old_next_row) { - num_rows = post->next_row - old_next_row; - (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, - (JSAMPARRAY) NULL, (int) num_rows); - *out_row_ctr += num_rows; - } - - /* Advance if we filled the strip. */ - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - - -/* - * Process some data in the second pass of 2-pass quantization. - */ - -METHODDEF(void) -post_process_2pass (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_post_ptr post = (my_post_ptr) cinfo->post; - JDIMENSION num_rows, max_rows; - - /* Reposition virtual buffer if at start of strip. */ - if (post->next_row == 0) { - post->buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, post->whole_image, - post->starting_row, post->strip_height, FALSE); - } - - /* Determine number of rows to emit. */ - num_rows = post->strip_height - post->next_row; /* available in strip */ - max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ - if (num_rows > max_rows) - num_rows = max_rows; - /* We have to check bottom of image here, can't depend on upsampler. */ - max_rows = cinfo->output_height - post->starting_row; - if (num_rows > max_rows) - num_rows = max_rows; - - /* Quantize and emit data. */ - (*cinfo->cquantize->color_quantize) (cinfo, - post->buffer + post->next_row, output_buf + *out_row_ctr, - (int) num_rows); - *out_row_ctr += num_rows; - - /* Advance if we filled the strip. */ - post->next_row += num_rows; - if (post->next_row >= post->strip_height) { - post->starting_row += post->strip_height; - post->next_row = 0; - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ - - -/* - * Initialize postprocessing controller. - */ - -GLOBAL(void) -jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) -{ - my_post_ptr post; - - post = (my_post_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_post_controller)); - cinfo->post = (struct jpeg_d_post_controller *) post; - post->pub.start_pass = start_pass_dpost; - post->whole_image = NULL; /* flag for no virtual arrays */ - post->buffer = NULL; /* flag for no strip buffer */ - - /* Create the quantization buffer, if needed */ - if (cinfo->quantize_colors) { - /* The buffer strip height is max_v_samp_factor, which is typically - * an efficient number of rows for upsampling to return. - * (In the presence of output rescaling, we might want to be smarter?) - */ - post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; - if (need_full_buffer) { - /* Two-pass color quantization: need full-image storage. */ - /* We round up the number of rows to a multiple of the strip height. */ -#ifdef QUANT_2PASS_SUPPORTED - post->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - cinfo->output_width * cinfo->out_color_components, - (JDIMENSION) jround_up((long) cinfo->output_height, - (long) post->strip_height), - post->strip_height); -#else - ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); -#endif /* QUANT_2PASS_SUPPORTED */ - } else { - /* One-pass color quantization: just make a strip buffer. */ - post->buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width * cinfo->out_color_components, - post->strip_height); - } - } -} diff --git a/libjpegtwrp/jdsample.c b/libjpegtwrp/jdsample.c deleted file mode 100644 index 80ffefb2a..000000000 --- a/libjpegtwrp/jdsample.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * jdsample.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains upsampling routines. - * - * Upsampling input data is counted in "row groups". A row group - * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) - * sample rows of each component. Upsampling will normally produce - * max_v_samp_factor pixel rows from each row group (but this could vary - * if the upsampler is applying a scale factor of its own). - * - * An excellent reference for image resampling is - * Digital Image Warping, George Wolberg, 1990. - * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Pointer to routine to upsample a single component */ -typedef JMETHOD(void, upsample1_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); - -/* Private subobject */ - -typedef struct { - struct jpeg_upsampler pub; /* public fields */ - - /* Color conversion buffer. When using separate upsampling and color - * conversion steps, this buffer holds one upsampled row group until it - * has been color converted and output. - * Note: we do not allocate any storage for component(s) which are full-size, - * ie do not need rescaling. The corresponding entry of color_buf[] is - * simply set to point to the input data array, thereby avoiding copying. - */ - JSAMPARRAY color_buf[MAX_COMPONENTS]; - - /* Per-component upsampling method pointers */ - upsample1_ptr methods[MAX_COMPONENTS]; - - int next_row_out; /* counts rows emitted from color_buf */ - JDIMENSION rows_to_go; /* counts rows remaining in image */ - - /* Height of an input row group for each component. */ - int rowgroup_height[MAX_COMPONENTS]; - - /* These arrays save pixel expansion factors so that int_expand need not - * recompute them each time. They are unused for other upsampling methods. - */ - UINT8 h_expand[MAX_COMPONENTS]; - UINT8 v_expand[MAX_COMPONENTS]; -} my_upsampler; - -typedef my_upsampler * my_upsample_ptr; - - -/* - * Initialize for an upsampling pass. - */ - -METHODDEF(void) -start_pass_upsample (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - - /* Mark the conversion buffer empty */ - upsample->next_row_out = cinfo->max_v_samp_factor; - /* Initialize total-height counter for detecting bottom of image */ - upsample->rows_to_go = cinfo->output_height; -} - - -/* - * Control routine to do upsampling (and color conversion). - * - * In this version we upsample each component independently. - * We upsample one row group into the conversion buffer, then apply - * color conversion a row at a time. - */ - -METHODDEF(void) -sep_upsample (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - int ci; - jpeg_component_info * compptr; - JDIMENSION num_rows; - - /* Fill the conversion buffer, if it's empty */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) { - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Invoke per-component upsample method. Notice we pass a POINTER - * to color_buf[ci], so that fullsize_upsample can change it. - */ - (*upsample->methods[ci]) (cinfo, compptr, - input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), - upsample->color_buf + ci); - } - upsample->next_row_out = 0; - } - - /* Color-convert and emit rows */ - - /* How many we have in the buffer: */ - num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); - /* Not more than the distance to the end of the image. Need this test - * in case the image height is not a multiple of max_v_samp_factor: - */ - if (num_rows > upsample->rows_to_go) - num_rows = upsample->rows_to_go; - /* And not more than what the client can accept: */ - out_rows_avail -= *out_row_ctr; - if (num_rows > out_rows_avail) - num_rows = out_rows_avail; - - (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, - (JDIMENSION) upsample->next_row_out, - output_buf + *out_row_ctr, - (int) num_rows); - - /* Adjust counts */ - *out_row_ctr += num_rows; - upsample->rows_to_go -= num_rows; - upsample->next_row_out += num_rows; - /* When the buffer is emptied, declare this input row group consumed */ - if (upsample->next_row_out >= cinfo->max_v_samp_factor) - (*in_row_group_ctr)++; -} - - -/* - * These are the routines invoked by sep_upsample to upsample pixel values - * of a single component. One row group is processed per call. - */ - - -/* - * For full-size components, we just make color_buf[ci] point at the - * input buffer, and thus avoid copying any data. Note that this is - * safe only because sep_upsample doesn't declare the input row group - * "consumed" until we are done color converting and emitting it. - */ - -METHODDEF(void) -fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = input_data; -} - - -/* - * This is a no-op version used for "uninteresting" components. - * These components will not be referenced by color conversion. - */ - -METHODDEF(void) -noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - *output_data_ptr = NULL; /* safety check */ -} - - -/* - * This version handles any integral sampling ratios. - * This is not used for typical JPEG files, so it need not be fast. - * Nor, for that matter, is it particularly accurate: the algorithm is - * simple replication of the input pixel onto the corresponding output - * pixels. The hi-falutin sampling literature refers to this as a - * "box filter". A box filter tends to introduce visible artifacts, - * so if you are actually going to use 3:1 or 4:1 sampling ratios - * you would be well advised to improve this code. - */ - -METHODDEF(void) -int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - register int h; - JSAMPROW outend; - int h_expand, v_expand; - int inrow, outrow; - - h_expand = upsample->h_expand[compptr->component_index]; - v_expand = upsample->v_expand[compptr->component_index]; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - /* Generate one output row with proper horizontal expansion */ - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - for (h = h_expand; h > 0; h--) { - *outptr++ = invalue; - } - } - /* Generate any additional output rows by duplicating the first one */ - if (v_expand > 1) { - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - v_expand-1, cinfo->output_width); - } - inrow++; - outrow += v_expand; - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. - * It's still a box filter. - */ - -METHODDEF(void) -h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - } -} - - -/* - * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. - * It's still a box filter. - */ - -METHODDEF(void) -h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register JSAMPLE invalue; - JSAMPROW outend; - int inrow, outrow; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - inptr = input_data[inrow]; - outptr = output_data[outrow]; - outend = outptr + cinfo->output_width; - while (outptr < outend) { - invalue = *inptr++; /* don't need GETJSAMPLE() here */ - *outptr++ = invalue; - *outptr++ = invalue; - } - jcopy_sample_rows(output_data, outrow, output_data, outrow+1, - 1, cinfo->output_width); - inrow++; - outrow += 2; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical. - * - * The upsampling algorithm is linear interpolation between pixel centers, - * also known as a "triangle filter". This is a good compromise between - * speed and visual quality. The centers of the output pixels are 1/4 and 3/4 - * of the way between input pixel centers. - * - * A note about the "bias" calculations: when rounding fractional values to - * integer, we do not want to always round 0.5 up to the next integer. - * If we did that, we'd introduce a noticeable bias towards larger values. - * Instead, this code is arranged so that 0.5 will be rounded up or down at - * alternate pixel locations (a simple ordered dither pattern). - */ - -METHODDEF(void) -h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr, outptr; - register int invalue; - register JDIMENSION colctr; - int inrow; - - for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { - inptr = input_data[inrow]; - outptr = output_data[inrow]; - /* Special case for first column */ - invalue = GETJSAMPLE(*inptr++); - *outptr++ = (JSAMPLE) invalue; - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2); - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel */ - invalue = GETJSAMPLE(*inptr++) * 3; - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2); - *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2); - } - - /* Special case for last column */ - invalue = GETJSAMPLE(*inptr); - *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2); - *outptr++ = (JSAMPLE) invalue; - } -} - - -/* - * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical. - * Again a triangle filter; see comments for h2v1 case, above. - * - * It is OK for us to reference the adjacent input rows because we demanded - * context from the main buffer controller (see initialization code). - */ - -METHODDEF(void) -h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) -{ - JSAMPARRAY output_data = *output_data_ptr; - register JSAMPROW inptr0, inptr1, outptr; -#if BITS_IN_JSAMPLE == 8 - register int thiscolsum, lastcolsum, nextcolsum; -#else - register INT32 thiscolsum, lastcolsum, nextcolsum; -#endif - register JDIMENSION colctr; - int inrow, outrow, v; - - inrow = outrow = 0; - while (outrow < cinfo->max_v_samp_factor) { - for (v = 0; v < 2; v++) { - /* inptr0 points to nearest input row, inptr1 points to next nearest */ - inptr0 = input_data[inrow]; - if (v == 0) /* next nearest is row above */ - inptr1 = input_data[inrow-1]; - else /* next nearest is row below */ - inptr1 = input_data[inrow+1]; - outptr = output_data[outrow++]; - - /* Special case for first column */ - thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - - for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { - /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */ - /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */ - nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); - lastcolsum = thiscolsum; thiscolsum = nextcolsum; - } - - /* Special case for last column */ - *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); - *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4); - } - inrow++; - } -} - - -/* - * Module initialization routine for upsampling. - */ - -GLOBAL(void) -jinit_upsampler (j_decompress_ptr cinfo) -{ - my_upsample_ptr upsample; - int ci; - jpeg_component_info * compptr; - boolean need_buffer, do_fancy; - int h_in_group, v_in_group, h_out_group, v_out_group; - - upsample = (my_upsample_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_upsampler)); - cinfo->upsample = (struct jpeg_upsampler *) upsample; - upsample->pub.start_pass = start_pass_upsample; - upsample->pub.upsample = sep_upsample; - upsample->pub.need_context_rows = FALSE; /* until we find out differently */ - - if (cinfo->CCIR601_sampling) /* this isn't supported */ - ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); - - /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1, - * so don't ask for it. - */ - do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1; - - /* Verify we can handle the sampling factors, select per-component methods, - * and create storage as needed. - */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Compute size of an "input group" after IDCT scaling. This many samples - * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. - */ - h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) / - cinfo->min_DCT_scaled_size; - h_out_group = cinfo->max_h_samp_factor; - v_out_group = cinfo->max_v_samp_factor; - upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ - need_buffer = TRUE; - if (! compptr->component_needed) { - /* Don't bother to upsample an uninteresting component. */ - upsample->methods[ci] = noop_upsample; - need_buffer = FALSE; - } else if (h_in_group == h_out_group && v_in_group == v_out_group) { - /* Fullsize components can be processed without any work. */ - upsample->methods[ci] = fullsize_upsample; - need_buffer = FALSE; - } else if (h_in_group * 2 == h_out_group && - v_in_group == v_out_group) { - /* Special cases for 2h1v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) - upsample->methods[ci] = h2v1_fancy_upsample; - else - upsample->methods[ci] = h2v1_upsample; - } else if (h_in_group * 2 == h_out_group && - v_in_group * 2 == v_out_group) { - /* Special cases for 2h2v upsampling */ - if (do_fancy && compptr->downsampled_width > 2) { - upsample->methods[ci] = h2v2_fancy_upsample; - upsample->pub.need_context_rows = TRUE; - } else - upsample->methods[ci] = h2v2_upsample; - } else if ((h_out_group % h_in_group) == 0 && - (v_out_group % v_in_group) == 0) { - /* Generic integral-factors upsampling method */ - upsample->methods[ci] = int_upsample; - upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); - upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); - } else - ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); - if (need_buffer) { - upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) jround_up((long) cinfo->output_width, - (long) cinfo->max_h_samp_factor), - (JDIMENSION) cinfo->max_v_samp_factor); - } - } -} diff --git a/libjpegtwrp/jdtrans.c b/libjpegtwrp/jdtrans.c deleted file mode 100644 index e06e170f4..000000000 --- a/libjpegtwrp/jdtrans.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * jdtrans.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains library routines for transcoding decompression, - * that is, reading raw DCT coefficient arrays from an input JPEG file. - * The routines in jdapimin.c will also be needed by a transcoder. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Forward declarations */ -LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo)); - - -/* - * Read the coefficient arrays from a JPEG file. - * jpeg_read_header must be completed before calling this. - * - * The entire image is read into a set of virtual coefficient-block arrays, - * one per component. The return value is a pointer to the array of - * virtual-array descriptors. These can be manipulated directly via the - * JPEG memory manager, or handed off to jpeg_write_coefficients(). - * To release the memory occupied by the virtual arrays, call - * jpeg_finish_decompress() when done with the data. - * - * An alternative usage is to simply obtain access to the coefficient arrays - * during a buffered-image-mode decompression operation. This is allowed - * after any jpeg_finish_output() call. The arrays can be accessed until - * jpeg_finish_decompress() is called. (Note that any call to the library - * may reposition the arrays, so don't rely on access_virt_barray() results - * to stay valid across library calls.) - * - * Returns NULL if suspended. This case need be checked only if - * a suspending data source is used. - */ - -GLOBAL(jvirt_barray_ptr *) -jpeg_read_coefficients (j_decompress_ptr cinfo) -{ - if (cinfo->global_state == DSTATE_READY) { - /* First call: initialize active modules */ - transdecode_master_selection(cinfo); - cinfo->global_state = DSTATE_RDCOEFS; - } - if (cinfo->global_state == DSTATE_RDCOEFS) { - /* Absorb whole file into the coef buffer */ - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input) (cinfo); - if (retcode == JPEG_SUSPENDED) - return NULL; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* startup underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } - /* Set state so that jpeg_finish_decompress does the right thing */ - cinfo->global_state = DSTATE_STOPPING; - } - /* At this point we should be in state DSTATE_STOPPING if being used - * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access - * to the coefficients during a full buffered-image-mode decompression. - */ - if ((cinfo->global_state == DSTATE_STOPPING || - cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { - return cinfo->coef->coef_arrays; - } - /* Oops, improper usage */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return NULL; /* keep compiler happy */ -} - -LOCAL(boolean) -jpeg_build_huffman_index_progressive(j_decompress_ptr cinfo, - huffman_index *index) -{ - if (cinfo->global_state == DSTATE_READY) { - printf("Progressive Mode\n"); - /* First call: initialize active modules */ - transdecode_master_selection(cinfo); - cinfo->global_state = DSTATE_RDCOEFS; - } - if (cinfo->global_state == DSTATE_RDCOEFS) { - unsigned int mcu; - int i; - cinfo->marker->get_sos_marker_position(cinfo, index); - - /* Absorb whole file into the coef buffer */ - for (mcu = 0; mcu < cinfo->total_iMCU_rows; mcu++) { - int retcode = 0; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - jinit_phuff_decoder(cinfo); - for (i = 0; i < index->scan_count; i++) { - (*cinfo->inputctl->finish_input_pass) (cinfo); - jset_input_stream_position(cinfo, index->scan[i].bitstream_offset); - cinfo->unread_marker = 0; - retcode = (*cinfo->inputctl->consume_input_build_huffman_index) - (cinfo, index, i); - if (retcode == JPEG_REACHED_EOI) - break; - cinfo->input_iMCU_row = mcu; - if (mcu != 0) - (*cinfo->entropy->configure_huffman_decoder) - (cinfo, index->scan[i].prev_MCU_offset); - cinfo->input_scan_number = i; - retcode = (*cinfo->inputctl->consume_input_build_huffman_index) - (cinfo, index, i); - } - if (retcode == JPEG_SUSPENDED) - return FALSE; - if (retcode == JPEG_REACHED_EOI) - break; - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* startup underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } - cinfo->global_state = DSTATE_STOPPING; - } - /* At this point we should be in state DSTATE_STOPPING if being used - * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access - * to the coefficients during a full buffered-image-mode decompression. - */ - if ((cinfo->global_state == DSTATE_STOPPING || - cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { - return TRUE; - } - /* Oops, improper usage */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return FALSE; /* keep compiler happy */ -} - -LOCAL(boolean) -jpeg_build_huffman_index_baseline(j_decompress_ptr cinfo, huffman_index *index) -{ - if (cinfo->global_state == DSTATE_READY) { - printf("Baseline Mode\n"); - /* First call: initialize active modules */ - transdecode_master_selection(cinfo); - cinfo->global_state = DSTATE_RDCOEFS; - } - if (cinfo->global_state == DSTATE_RDCOEFS) { - /* Absorb whole file into the coef buffer */ - for (;;) { - int retcode; - /* Call progress monitor hook if present */ - if (cinfo->progress != NULL) - (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); - /* Absorb some more input */ - retcode = (*cinfo->inputctl->consume_input_build_huffman_index) - (cinfo, index, 0); - if (retcode == JPEG_SUSPENDED) - return FALSE; - if (retcode == JPEG_REACHED_EOI) - break; - if (retcode == JPEG_SCAN_COMPLETED) - break; - - /* Advance progress counter if appropriate */ - if (cinfo->progress != NULL && - (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { - if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { - /* startup underestimated number of scans; ratchet up one scan */ - cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; - } - } - } - /* Set state so that jpeg_finish_decompress does the right thing */ - cinfo->global_state = DSTATE_STOPPING; - } - /* At this point we should be in state DSTATE_STOPPING if being used - * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access - * to the coefficients during a full buffered-image-mode decompression. - */ - if ((cinfo->global_state == DSTATE_STOPPING || - cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { - return TRUE; - } - /* Oops, improper usage */ - ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); - return FALSE; /* keep compiler happy */ -} - -GLOBAL(boolean) -jpeg_build_huffman_index(j_decompress_ptr cinfo, huffman_index *index) -{ - cinfo->tile_decode = TRUE; - if (cinfo->progressive_mode) - return jpeg_build_huffman_index_progressive(cinfo, index); - else - return jpeg_build_huffman_index_baseline(cinfo, index); -} - -/* - * Master selection of decompression modules for transcoding. - * This substitutes for jdmaster.c's initialization of the full decompressor. - */ - -LOCAL(void) -transdecode_master_selection (j_decompress_ptr cinfo) -{ - /* This is effectively a buffered-image operation. */ - cinfo->buffered_image = TRUE; - - /* Entropy decoding: either Huffman or arithmetic coding. */ - if (cinfo->arith_code) { - ERREXIT(cinfo, JERR_ARITH_NOTIMPL); - } else { - if (cinfo->progressive_mode) { -#ifdef D_PROGRESSIVE_SUPPORTED - jinit_phuff_decoder(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - jinit_huff_decoder(cinfo); - } - } - - /* Always get a full-image coefficient buffer. */ - jinit_d_coef_controller(cinfo, TRUE); - - /* We can now tell the memory manager to allocate virtual arrays. */ - (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); - - /* Initialize input side of decompressor to consume first scan. */ - (*cinfo->inputctl->start_input_pass) (cinfo); - - /* Initialize progress monitoring. */ - if (cinfo->progress != NULL) { - int nscans; - /* Estimate number of scans to set pass_limit. */ - if (cinfo->progressive_mode) { - /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ - nscans = 2 + 3 * cinfo->num_components; - } else if (cinfo->inputctl->has_multiple_scans) { - /* For a nonprogressive multiscan file, estimate 1 scan per component. */ - nscans = cinfo->num_components; - } else { - nscans = 1; - } - cinfo->progress->pass_counter = 0L; - cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; - cinfo->progress->completed_passes = 0; - cinfo->progress->total_passes = 1; - } -} diff --git a/libjpegtwrp/jerror.c b/libjpegtwrp/jerror.c deleted file mode 100644 index 3da7be86a..000000000 --- a/libjpegtwrp/jerror.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * jerror.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains simple error-reporting and trace-message routines. - * These are suitable for Unix-like systems and others where writing to - * stderr is the right thing to do. Many applications will want to replace - * some or all of these routines. - * - * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile, - * you get a Windows-specific hack to display error messages in a dialog box. - * It ain't much, but it beats dropping error messages into the bit bucket, - * which is what happens to output to stderr under most Windows C compilers. - * - * These routines are used by both the compression and decompression code. - */ - -/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jversion.h" -#include "jerror.h" - -#ifdef USE_WINDOWS_MESSAGEBOX -#include -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif - - -/* - * Create the message string table. - * We do this from the master message list in jerror.h by re-reading - * jerror.h with a suitable definition for macro JMESSAGE. - * The message table is made an external symbol just in case any applications - * want to refer to it directly. - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_message_table jMsgTable -#endif - -#define JMESSAGE(code,string) string , - -const char * const jpeg_std_message_table[] = { -#include "jerror.h" - NULL -}; - - -/* - * Error exit handler: must not return to caller. - * - * Applications may override this if they want to get control back after - * an error. Typically one would longjmp somewhere instead of exiting. - * The setjmp buffer can be made a private field within an expanded error - * handler object. Note that the info needed to generate an error message - * is stored in the error object, so you can generate the message now or - * later, at your convenience. - * You should make sure that the JPEG object is cleaned up (with jpeg_abort - * or jpeg_destroy) at some point. - */ - -METHODDEF(void) -error_exit (j_common_ptr cinfo) -{ - /* Always display the message */ - (*cinfo->err->output_message) (cinfo); - - /* Let the memory manager delete any temp files before we die */ - jpeg_destroy(cinfo); - - exit(EXIT_FAILURE); -} - - -/* - * Actual output of an error or trace message. - * Applications may override this method to send JPEG messages somewhere - * other than stderr. - * - * On Windows, printing to stderr is generally completely useless, - * so we provide optional code to produce an error-dialog popup. - * Most Windows applications will still prefer to override this routine, - * but if they don't, it'll do something at least marginally useful. - * - * NOTE: to use the library in an environment that doesn't support the - * C stdio library, you may have to delete the call to fprintf() entirely, - * not just not use this routine. - */ - -METHODDEF(void) -output_message (j_common_ptr cinfo) -{ - char buffer[JMSG_LENGTH_MAX]; - - /* Create the message */ - (*cinfo->err->format_message) (cinfo, buffer); - -#ifdef USE_WINDOWS_MESSAGEBOX - /* Display it in a message dialog box */ - MessageBox(GetActiveWindow(), buffer, "JPEG Library Error", - MB_OK | MB_ICONERROR); -#else - /* Send it to stderr, adding a newline */ - fprintf(stderr, "%s\n", buffer); -#endif -} - - -/* - * Decide whether to emit a trace or warning message. - * msg_level is one of: - * -1: recoverable corrupt-data warning, may want to abort. - * 0: important advisory messages (always display to user). - * 1: first level of tracing detail. - * 2,3,...: successively more detailed tracing messages. - * An application might override this method if it wanted to abort on warnings - * or change the policy about which messages to display. - */ - -METHODDEF(void) -emit_message (j_common_ptr cinfo, int msg_level) -{ - struct jpeg_error_mgr * err = cinfo->err; - - if (msg_level < 0) { - /* It's a warning message. Since corrupt files may generate many warnings, - * the policy implemented here is to show only the first warning, - * unless trace_level >= 3. - */ - if (err->num_warnings == 0 || err->trace_level >= 3) - (*err->output_message) (cinfo); - /* Always count warnings in num_warnings. */ - err->num_warnings++; - } else { - /* It's a trace message. Show it if trace_level >= msg_level. */ - if (err->trace_level >= msg_level) - (*err->output_message) (cinfo); - } -} - - -/* - * Format a message string for the most recent JPEG error or message. - * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX - * characters. Note that no '\n' character is added to the string. - * Few applications should need to override this method. - */ - -METHODDEF(void) -format_message (j_common_ptr cinfo, char * buffer) -{ - struct jpeg_error_mgr * err = cinfo->err; - int msg_code = err->msg_code; - const char * msgtext = NULL; - const char * msgptr; - char ch; - boolean isstring; - - /* Look up message string in proper table */ - if (msg_code > 0 && msg_code <= err->last_jpeg_message) { - msgtext = err->jpeg_message_table[msg_code]; - } else if (err->addon_message_table != NULL && - msg_code >= err->first_addon_message && - msg_code <= err->last_addon_message) { - msgtext = err->addon_message_table[msg_code - err->first_addon_message]; - } - - /* Defend against bogus message number */ - if (msgtext == NULL) { - err->msg_parm.i[0] = msg_code; - msgtext = err->jpeg_message_table[0]; - } - - /* Check for string parameter, as indicated by %s in the message text */ - isstring = FALSE; - msgptr = msgtext; - while ((ch = *msgptr++) != '\0') { - if (ch == '%') { - if (*msgptr == 's') isstring = TRUE; - break; - } - } - - /* Format the message into the passed buffer */ - if (isstring) - sprintf(buffer, msgtext, err->msg_parm.s); - else - sprintf(buffer, msgtext, - err->msg_parm.i[0], err->msg_parm.i[1], - err->msg_parm.i[2], err->msg_parm.i[3], - err->msg_parm.i[4], err->msg_parm.i[5], - err->msg_parm.i[6], err->msg_parm.i[7]); -} - - -/* - * Reset error state variables at start of a new image. - * This is called during compression startup to reset trace/error - * processing to default state, without losing any application-specific - * method pointers. An application might possibly want to override - * this method if it has additional error processing state. - */ - -METHODDEF(void) -reset_error_mgr (j_common_ptr cinfo) -{ - cinfo->err->num_warnings = 0; - /* trace_level is not reset since it is an application-supplied parameter */ - cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ -} - - -/* - * Fill in the standard error-handling methods in a jpeg_error_mgr object. - * Typical call is: - * struct jpeg_compress_struct cinfo; - * struct jpeg_error_mgr err; - * - * cinfo.err = jpeg_std_error(&err); - * after which the application may override some of the methods. - */ - -GLOBAL(struct jpeg_error_mgr *) -jpeg_std_error (struct jpeg_error_mgr * err) -{ - err->error_exit = error_exit; - err->emit_message = emit_message; - err->output_message = output_message; - err->format_message = format_message; - err->reset_error_mgr = reset_error_mgr; - - err->trace_level = 0; /* default = no tracing */ - err->num_warnings = 0; /* no warnings emitted yet */ - err->msg_code = 0; /* may be useful as a flag for "no error" */ - - /* Initialize message table pointers */ - err->jpeg_message_table = jpeg_std_message_table; - err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; - - err->addon_message_table = NULL; - err->first_addon_message = 0; /* for safety */ - err->last_addon_message = 0; - - return err; -} diff --git a/libjpegtwrp/jerror.h b/libjpegtwrp/jerror.h deleted file mode 100644 index fc2fffeac..000000000 --- a/libjpegtwrp/jerror.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * jerror.h - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the error and message codes for the JPEG library. - * Edit this file to add new codes, or to translate the message strings to - * some other language. - * A set of error-reporting macros are defined too. Some applications using - * the JPEG library may wish to include this file to get the error codes - * and/or the macros. - */ - -/* - * To define the enum list of message codes, include this file without - * defining macro JMESSAGE. To create a message string table, include it - * again with a suitable JMESSAGE definition (see jerror.c for an example). - */ -#ifndef JMESSAGE -#ifndef JERROR_H -/* First time through, define the enum list */ -#define JMAKE_ENUM_LIST -#else -/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ -#define JMESSAGE(code,string) -#endif /* JERROR_H */ -#endif /* JMESSAGE */ - -#ifdef JMAKE_ENUM_LIST - -typedef enum { - -#define JMESSAGE(code,string) code , - -#endif /* JMAKE_ENUM_LIST */ - -JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ - -/* For maintenance convenience, list is alphabetical by message code name */ -JMESSAGE(JERR_ARITH_NOTIMPL, - "Sorry, there are legal restrictions on arithmetic coding") -JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") -JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") -JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") -JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") -JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") -JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") -JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") -JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") -JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") -JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") -JMESSAGE(JERR_BAD_LIB_VERSION, - "Wrong JPEG library version: library is %d, caller expects %d") -JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") -JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") -JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") -JMESSAGE(JERR_BAD_PROGRESSION, - "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") -JMESSAGE(JERR_BAD_PROG_SCRIPT, - "Invalid progressive parameters at scan script entry %d") -JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") -JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") -JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") -JMESSAGE(JERR_BAD_STRUCT_SIZE, - "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") -JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") -JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") -JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") -JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") -JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") -JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") -JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") -JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") -JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") -JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") -JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") -JMESSAGE(JERR_EMS_READ, "Read from EMS failed") -JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") -JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") -JMESSAGE(JERR_FILE_READ, "Input file read error") -JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") -JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") -JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") -JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") -JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") -JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") -JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") -JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, - "Cannot transcode due to multiple use of quantization table %d") -JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") -JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") -JMESSAGE(JERR_NOTIMPL, "Not implemented yet") -JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") -JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") -JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") -JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") -JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") -JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") -JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") -JMESSAGE(JERR_QUANT_COMPONENTS, - "Cannot quantize more than %d color components") -JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") -JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") -JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") -JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") -JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") -JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") -JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") -JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") -JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") -JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") -JMESSAGE(JERR_TFILE_WRITE, - "Write failed on temporary file --- out of disk space?") -JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") -JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") -JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") -JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") -JMESSAGE(JERR_XMS_READ, "Read from XMS failed") -JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") -JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) -JMESSAGE(JMSG_VERSION, JVERSION) -JMESSAGE(JTRC_16BIT_TABLES, - "Caution: quantization tables are too coarse for baseline JPEG") -JMESSAGE(JTRC_ADOBE, - "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") -JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") -JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") -JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") -JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") -JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") -JMESSAGE(JTRC_DRI, "Define Restart Interval %u") -JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") -JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") -JMESSAGE(JTRC_EOI, "End Of Image") -JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") -JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") -JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, - "Warning: thumbnail image size does not match data length %u") -JMESSAGE(JTRC_JFIF_EXTENSION, - "JFIF extension marker: type 0x%02x, length %u") -JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") -JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") -JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") -JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") -JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") -JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") -JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") -JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") -JMESSAGE(JTRC_RST, "RST%d") -JMESSAGE(JTRC_SMOOTH_NOTIMPL, - "Smoothing not supported with nonstandard sampling ratios") -JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") -JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") -JMESSAGE(JTRC_SOI, "Start of Image") -JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") -JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") -JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") -JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") -JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") -JMESSAGE(JTRC_THUMB_JPEG, - "JFIF extension marker: JPEG-compressed thumbnail image, length %u") -JMESSAGE(JTRC_THUMB_PALETTE, - "JFIF extension marker: palette thumbnail image, length %u") -JMESSAGE(JTRC_THUMB_RGB, - "JFIF extension marker: RGB thumbnail image, length %u") -JMESSAGE(JTRC_UNKNOWN_IDS, - "Unrecognized component IDs %d %d %d, assuming YCbCr") -JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") -JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") -JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") -JMESSAGE(JWRN_BOGUS_PROGRESSION, - "Inconsistent progression sequence for component %d coefficient %d") -JMESSAGE(JWRN_EXTRANEOUS_DATA, - "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") -JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") -JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") -JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") -JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") -JMESSAGE(JWRN_MUST_RESYNC, - "Corrupt JPEG data: found marker 0x%02x instead of RST%d") -JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") -JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") - -#ifdef JMAKE_ENUM_LIST - - JMSG_LASTMSGCODE -} J_MESSAGE_CODE; - -#undef JMAKE_ENUM_LIST -#endif /* JMAKE_ENUM_LIST */ - -/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ -#undef JMESSAGE - - -#ifndef JERROR_H -#define JERROR_H - -/* Macros to simplify using the error and trace message stuff */ -/* The first parameter is either type of cinfo pointer */ - -/* Fatal errors (print message and exit) */ -#define ERREXIT(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT3(cinfo,code,p1,p2,p3) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (cinfo)->err->msg_parm.i[2] = (p3), \ - (cinfo)->err->msg_parm.i[3] = (p4), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) -#define ERREXITS(cinfo,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) - -#define MAKESTMT(stuff) do { stuff } while (0) - -/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ -#define WARNMS(cinfo,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS1(cinfo,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) -#define WARNMS2(cinfo,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) - -/* Informational/debugging messages */ -#define TRACEMS(cinfo,lvl,code) \ - ((cinfo)->err->msg_code = (code), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS1(cinfo,lvl,code,p1) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS2(cinfo,lvl,code,p1,p2) \ - ((cinfo)->err->msg_code = (code), \ - (cinfo)->err->msg_parm.i[0] = (p1), \ - (cinfo)->err->msg_parm.i[1] = (p2), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) -#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - _mp[4] = (p5); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ - MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ - _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ - _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ - (cinfo)->err->msg_code = (code); \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) -#define TRACEMSS(cinfo,lvl,code,str) \ - ((cinfo)->err->msg_code = (code), \ - strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ - (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) - -#endif /* JERROR_H */ diff --git a/libjpegtwrp/jfdctflt.c b/libjpegtwrp/jfdctflt.c deleted file mode 100644 index 79d7a0078..000000000 --- a/libjpegtwrp/jfdctflt.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * jfdctflt.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * forward DCT (Discrete Cosine Transform). - * - * This implementation should be more accurate than either of the integer - * DCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_float (FAST_FLOAT * data) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; - FAST_FLOAT *dataptr; - int ctr; - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ - z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ - z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ - z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/libjpegtwrp/jfdctfst.c b/libjpegtwrp/jfdctfst.c deleted file mode 100644 index ccb378a3b..000000000 --- a/libjpegtwrp/jfdctfst.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * jfdctfst.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a fast, not so accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with fixed-point math, - * accuracy is lost due to imprecise representation of the scaled - * quantization values. The smaller the quantization table entry, the less - * precise the scaled value, so this implementation does worse with high- - * quality-setting files than with low-quality ones. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_IFAST_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling decisions are generally the same as in the LL&M algorithm; - * see jfdctint.c for more details. However, we choose to descale - * (right shift) multiplication products as soon as they are formed, - * rather than carrying additional fractional bits into subsequent additions. - * This compromises accuracy slightly, but it lets us save a few shifts. - * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) - * everywhere except in the multiplications proper; this saves a good deal - * of work on 16-bit-int machines. - * - * Again to save a few shifts, the intermediate results between pass 1 and - * pass 2 are not upscaled, but are represented only to integral precision. - * - * A final compromise is to represent the multiplicative constants to only - * 8 fractional bits, rather than 13. This saves some shifting work on some - * machines, and may also reduce the cost of multiplication (since there - * are fewer one-bits in the constants). - */ - -#define CONST_BITS 8 - - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 8 -#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ -#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ -#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ -#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ -#else -#define FIX_0_382683433 FIX(0.382683433) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_707106781 FIX(0.707106781) -#define FIX_1_306562965 FIX(1.306562965) -#endif - - -/* We can gain a little more speed, with a further compromise in accuracy, - * by omitting the addition in a descaling shift. This yields an incorrectly - * rounded result half the time... - */ - -#ifndef USE_ACCURATE_ROUNDING -#undef DESCALE -#define DESCALE(x,n) RIGHT_SHIFT(x, n) -#endif - - -/* Multiply a DCTELEM variable by an INT32 constant, and immediately - * descale to yield a DCTELEM result. - */ - -#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_ifast (DCTELEM * data) -{ - DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - DCTELEM tmp10, tmp11, tmp12, tmp13; - DCTELEM z1, z2, z3, z4, z5, z11, z13; - DCTELEM *dataptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = tmp10 + tmp11; /* phase 3 */ - dataptr[4] = tmp10 - tmp11; - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ - dataptr[2] = tmp13 + z1; /* phase 5 */ - dataptr[6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ - z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ - z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ - z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[5] = z13 + z2; /* phase 6 */ - dataptr[3] = z13 - z2; - dataptr[1] = z11 + z4; - dataptr[7] = z11 - z4; - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part */ - - tmp10 = tmp0 + tmp3; /* phase 2 */ - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ - dataptr[DCTSIZE*4] = tmp10 - tmp11; - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ - dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ - dataptr[DCTSIZE*6] = tmp13 - z1; - - /* Odd part */ - - tmp10 = tmp4 + tmp5; /* phase 2 */ - tmp11 = tmp5 + tmp6; - tmp12 = tmp6 + tmp7; - - /* The rotator is modified from fig 4-8 to avoid extra negations. */ - z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ - z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ - z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ - z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ - - z11 = tmp7 + z3; /* phase 5 */ - z13 = tmp7 - z3; - - dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ - dataptr[DCTSIZE*3] = z13 - z2; - dataptr[DCTSIZE*1] = z11 + z4; - dataptr[DCTSIZE*7] = z11 - z4; - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_IFAST_SUPPORTED */ diff --git a/libjpegtwrp/jfdctint.c b/libjpegtwrp/jfdctint.c deleted file mode 100644 index 0a78b64ae..000000000 --- a/libjpegtwrp/jfdctint.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * jfdctint.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * forward DCT (Discrete Cosine Transform). - * - * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT - * on each column. Direct algorithms are also available, but they are - * much more complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D DCT step produces outputs which are a factor of sqrt(N) - * larger than the true DCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D DCT, - * because the y0 and y4 outputs need not be divided by sqrt(N). - * In the IJG code, this factor of 8 is removed by the quantization step - * (in jcdctmgr.c), NOT in this module. - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (For 12-bit sample data, the intermediate - * array is INT32 anyway.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* - * Perform the forward DCT on one block of samples. - */ - -GLOBAL(void) -jpeg_fdct_islow (DCTELEM * data) -{ - INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3, z4, z5; - DCTELEM *dataptr; - int ctr; - SHIFT_TEMPS - - /* Pass 1: process rows. */ - /* Note results are scaled up by sqrt(8) compared to a true DCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[0] + dataptr[7]; - tmp7 = dataptr[0] - dataptr[7]; - tmp1 = dataptr[1] + dataptr[6]; - tmp6 = dataptr[1] - dataptr[6]; - tmp2 = dataptr[2] + dataptr[5]; - tmp5 = dataptr[2] - dataptr[5]; - tmp3 = dataptr[3] + dataptr[4]; - tmp4 = dataptr[3] - dataptr[4]; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS); - dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), - CONST_BITS-PASS1_BITS); - dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), - CONST_BITS-PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents cos(K*pi/16). - * i0..i3 in the paper are tmp4..tmp7 here. - */ - - z1 = tmp4 + tmp7; - z2 = tmp5 + tmp6; - z3 = tmp4 + tmp6; - z4 = tmp5 + tmp7; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS); - dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS); - dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS); - dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS); - - dataptr += DCTSIZE; /* advance pointer to next row */ - } - - /* Pass 2: process columns. - * We remove the PASS1_BITS scaling, but leave the results scaled up - * by an overall factor of 8. - */ - - dataptr = data; - for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { - tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; - tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; - tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; - tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; - tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; - tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; - tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; - tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; - - /* Even part per LL&M figure 1 --- note that published figure is faulty; - * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". - */ - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS); - dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS); - - z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); - dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), - CONST_BITS+PASS1_BITS); - - /* Odd part per figure 8 --- note paper omits factor of sqrt(2). - * cK represents cos(K*pi/16). - * i0..i3 in the paper are tmp4..tmp7 here. - */ - - z1 = tmp4 + tmp7; - z2 = tmp5 + tmp6; - z3 = tmp4 + tmp6; - z4 = tmp5 + tmp7; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, - CONST_BITS+PASS1_BITS); - dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, - CONST_BITS+PASS1_BITS); - - dataptr++; /* advance pointer to next column */ - } -} - -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/libjpegtwrp/jidctflt.c b/libjpegtwrp/jidctflt.c deleted file mode 100644 index 0188ce3df..000000000 --- a/libjpegtwrp/jidctflt.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * jidctflt.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a floating-point implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * This implementation should be more accurate than either of the integer - * IDCT implementations. However, it may not give the same results on all - * machines because of differences in roundoff behavior. Speed will depend - * on the hardware's floating point capacity. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with a fixed-point - * implementation, accuracy is lost due to imprecise representation of the - * scaled quantization values. However, that problem does not arise if - * we use floating point arithmetic. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_FLOAT_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a float result. - */ - -#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - FAST_FLOAT tmp10, tmp11, tmp12, tmp13; - FAST_FLOAT z5, z10, z11, z12, z13; - JCOEFPTR inptr; - FLOAT_MULT_TYPE * quantptr; - FAST_FLOAT * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - wsptr[DCTSIZE*0] = tmp0 + tmp7; - wsptr[DCTSIZE*7] = tmp0 - tmp7; - wsptr[DCTSIZE*1] = tmp1 + tmp6; - wsptr[DCTSIZE*6] = tmp1 - tmp6; - wsptr[DCTSIZE*2] = tmp2 + tmp5; - wsptr[DCTSIZE*5] = tmp2 - tmp5; - wsptr[DCTSIZE*4] = tmp3 + tmp4; - wsptr[DCTSIZE*3] = tmp3 - tmp4; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * And testing floats for zero is relatively expensive, so we don't bother. - */ - - /* Even part */ - - tmp10 = wsptr[0] + wsptr[4]; - tmp11 = wsptr[0] - wsptr[4]; - - tmp13 = wsptr[2] + wsptr[6]; - tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = wsptr[5] + wsptr[3]; - z10 = wsptr[5] - wsptr[3]; - z11 = wsptr[1] + wsptr[7]; - z12 = wsptr[1] - wsptr[7]; - - tmp7 = z11 + z13; - tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); - - z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ - tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ - tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/libjpegtwrp/jidctfst.c b/libjpegtwrp/jidctfst.c deleted file mode 100644 index dba4216fb..000000000 --- a/libjpegtwrp/jidctfst.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * jidctfst.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a fast, not so accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on Arai, Agui, and Nakajima's algorithm for - * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in - * Japanese, but the algorithm is described in the Pennebaker & Mitchell - * JPEG textbook (see REFERENCES section in file README). The following code - * is based directly on figure 4-8 in P&M. - * While an 8-point DCT cannot be done in less than 11 multiplies, it is - * possible to arrange the computation so that many of the multiplies are - * simple scalings of the final outputs. These multiplies can then be - * folded into the multiplications or divisions by the JPEG quantization - * table entries. The AA&N method leaves only 5 multiplies and 29 adds - * to be done in the DCT itself. - * The primary disadvantage of this method is that with fixed-point math, - * accuracy is lost due to imprecise representation of the scaled - * quantization values. The smaller the quantization table entry, the less - * precise the scaled value, so this implementation does worse with high- - * quality-setting files than with low-quality ones. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_IFAST_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling decisions are generally the same as in the LL&M algorithm; - * see jidctint.c for more details. However, we choose to descale - * (right shift) multiplication products as soon as they are formed, - * rather than carrying additional fractional bits into subsequent additions. - * This compromises accuracy slightly, but it lets us save a few shifts. - * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) - * everywhere except in the multiplications proper; this saves a good deal - * of work on 16-bit-int machines. - * - * The dequantized coefficients are not integers because the AA&N scaling - * factors have been incorporated. We represent them scaled up by PASS1_BITS, - * so that the first and second IDCT rounds have the same input scaling. - * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to - * avoid a descaling shift; this compromises accuracy rather drastically - * for small quantization table entries, but it saves a lot of shifts. - * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, - * so we use a much larger scaling factor to preserve accuracy. - * - * A final compromise is to represent the multiplicative constants to only - * 8 fractional bits, rather than 13. This saves some shifting work on some - * machines, and may also reduce the cost of multiplication (since there - * are fewer one-bits in the constants). - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 8 -#define PASS1_BITS 2 -#else -#define CONST_BITS 8 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 8 -#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ -#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ -#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ -#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ -#else -#define FIX_1_082392200 FIX(1.082392200) -#define FIX_1_414213562 FIX(1.414213562) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_2_613125930 FIX(2.613125930) -#endif - - -/* We can gain a little more speed, with a further compromise in accuracy, - * by omitting the addition in a descaling shift. This yields an incorrectly - * rounded result half the time... - */ - -#ifndef USE_ACCURATE_ROUNDING -#undef DESCALE -#define DESCALE(x,n) RIGHT_SHIFT(x, n) -#endif - - -/* Multiply a DCTELEM variable by an INT32 constant, and immediately - * descale to yield a DCTELEM result. - */ - -#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 - * multiplication will do. For 12-bit data, the multiplier table is - * declared INT32, so a 32-bit multiply will be used. - */ - -#if BITS_IN_JSAMPLE == 8 -#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) -#else -#define DEQUANTIZE(coef,quantval) \ - DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) -#endif - - -/* Like DESCALE, but applies to a DCTELEM and produces an int. - * We assume that int right shift is unsigned if INT32 right shift is. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define ISHIFT_TEMPS DCTELEM ishift_temp; -#if BITS_IN_JSAMPLE == 8 -#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ -#else -#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ -#endif -#define IRIGHT_SHIFT(x,shft) \ - ((ishift_temp = (x)) < 0 ? \ - (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ - (ishift_temp >> (shft))) -#else -#define ISHIFT_TEMPS -#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - -#ifdef USE_ACCURATE_ROUNDING -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) -#else -#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) -#endif - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; - DCTELEM tmp10, tmp11, tmp12, tmp13; - DCTELEM z5, z10, z11, z12, z13; - JCOEFPTR inptr; - IFAST_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS /* for DESCALE */ - ISHIFT_TEMPS /* for IDESCALE */ - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp10 = tmp0 + tmp2; /* phase 3 */ - tmp11 = tmp0 - tmp2; - - tmp13 = tmp1 + tmp3; /* phases 5-3 */ - tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ - - tmp0 = tmp10 + tmp13; /* phase 2 */ - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - z13 = tmp6 + tmp5; /* phase 6 */ - z10 = tmp6 - tmp5; - z11 = tmp4 + tmp7; - z12 = tmp4 - tmp7; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ - - z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); - wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); - wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); - wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); - wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); - wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); - wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); - wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); - tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); - - tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); - tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) - - tmp13; - - tmp0 = tmp10 + tmp13; - tmp3 = tmp10 - tmp13; - tmp1 = tmp11 + tmp12; - tmp2 = tmp11 - tmp12; - - /* Odd part */ - - z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; - z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; - z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; - z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; - - tmp7 = z11 + z13; /* phase 5 */ - tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ - - z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ - tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ - tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ - - tmp6 = tmp12 - tmp7; /* phase 2 */ - tmp5 = tmp11 - tmp6; - tmp4 = tmp10 + tmp5; - - /* Final output stage: scale down by a factor of 8 and range-limit */ - - outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_IFAST_SUPPORTED */ diff --git a/libjpegtwrp/jidctint.c b/libjpegtwrp/jidctint.c deleted file mode 100644 index a72b3207c..000000000 --- a/libjpegtwrp/jidctint.c +++ /dev/null @@ -1,389 +0,0 @@ -/* - * jidctint.c - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a slow-but-accurate integer implementation of the - * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine - * must also perform dequantization of the input coefficients. - * - * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT - * on each row (or vice versa, but it's more convenient to emit a row at - * a time). Direct algorithms are also available, but they are much more - * complex and seem not to be any faster when reduced to code. - * - * This implementation is based on an algorithm described in - * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT - * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, - * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. - * The primary algorithm described there uses 11 multiplies and 29 adds. - * We use their alternate method with 12 multiplies and 32 adds. - * The advantage of this method is that no data path contains more than one - * multiplication; this allows a very simple and accurate implementation in - * scaled fixed-point arithmetic, with a minimal number of shifts. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef DCT_ISLOW_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* - * The poop on this scaling stuff is as follows: - * - * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) - * larger than the true IDCT outputs. The final outputs are therefore - * a factor of N larger than desired; since N=8 this can be cured by - * a simple right shift at the end of the algorithm. The advantage of - * this arrangement is that we save two multiplications per 1-D IDCT, - * because the y0 and y4 inputs need not be divided by sqrt(N). - * - * We have to do addition and subtraction of the integer inputs, which - * is no problem, and multiplication by fractional constants, which is - * a problem to do in integer arithmetic. We multiply all the constants - * by CONST_SCALE and convert them to integer constants (thus retaining - * CONST_BITS bits of precision in the constants). After doing a - * multiplication we have to divide the product by CONST_SCALE, with proper - * rounding, to produce the correct output. This division can be done - * cheaply as a right shift of CONST_BITS bits. We postpone shifting - * as long as possible so that partial sums can be added together with - * full fractional precision. - * - * The outputs of the first pass are scaled up by PASS1_BITS bits so that - * they are represented to better-than-integral precision. These outputs - * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word - * with the recommended scaling. (To scale up 12-bit sample data further, an - * intermediate INT32 array would be needed.) - * - * To avoid overflow of the 32-bit intermediate results in pass 2, we must - * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis - * shows that the values given below are the most effective. - */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ -#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ -#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ -#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ -#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ -#else -#define FIX_0_298631336 FIX(0.298631336) -#define FIX_0_390180644 FIX(0.390180644) -#define FIX_0_541196100 FIX(0.541196100) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_175875602 FIX(1.175875602) -#define FIX_1_501321110 FIX(1.501321110) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_1_961570560 FIX(1.961570560) -#define FIX_2_053119869 FIX(2.053119869) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_072711026 FIX(3.072711026) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients. - */ - -GLOBAL(void) -jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp1, tmp2, tmp3; - INT32 tmp10, tmp11, tmp12, tmp13; - INT32 z1, z2, z3, z4, z5; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ - /* furthermore, we scale the results by 2**PASS1_BITS. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; ctr--) { - /* Due to quantization, we will usually find that many of the input - * coefficients are zero, especially the AC terms. We can exploit this - * by short-circuiting the IDCT calculation for any column in which all - * the AC terms are zero. In that case each output is equal to the - * DC coefficient (with scale factor as needed). - * With typical images and quantization tables, half or more of the - * column DCT calculations can be simplified this way. - */ - - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && - inptr[DCTSIZE*7] == 0) { - /* AC terms all zero */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - wsptr[DCTSIZE*4] = dcval; - wsptr[DCTSIZE*5] = dcval; - wsptr[DCTSIZE*6] = dcval; - wsptr[DCTSIZE*7] = dcval; - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - continue; - } - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); - tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); - - z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - - tmp0 = (z2 + z3) << CONST_BITS; - tmp1 = (z2 - z3) << CONST_BITS; - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - z1 = tmp0 + tmp3; - z2 = tmp1 + tmp2; - z3 = tmp0 + tmp2; - z4 = tmp1 + tmp3; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - tmp0 += z1 + z3; - tmp1 += z2 + z4; - tmp2 += z2 + z3; - tmp3 += z1 + z4; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*7] = (int) DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*6] = (int) DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*5] = (int) DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*3] = (int) DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS); - wsptr[DCTSIZE*4] = (int) DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS); - - inptr++; /* advance pointers to next column */ - quantptr++; - wsptr++; - } - - /* Pass 2: process rows from work array, store into output array. */ - /* Note that we must descale the results by a factor of 8 == 2**3, */ - /* and also undo the PASS1_BITS scaling. */ - - wsptr = workspace; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - /* Rows of zeroes can be exploited in the same way as we did with columns. - * However, the column calculation has created many nonzero AC terms, so - * the simplification applies less often (typically 5% to 10% of the time). - * On machines with very fast multiplication, it's possible that the - * test takes more time than it's worth. In that case this section - * may be commented out. - */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - outptr[4] = dcval; - outptr[5] = dcval; - outptr[6] = dcval; - outptr[7] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part: reverse the even part of the forward DCT. */ - /* The rotator is sqrt(2)*c(-6). */ - - z2 = (INT32) wsptr[2]; - z3 = (INT32) wsptr[6]; - - z1 = MULTIPLY(z2 + z3, FIX_0_541196100); - tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); - tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); - - tmp0 = ((INT32) wsptr[0] + (INT32) wsptr[4]) << CONST_BITS; - tmp1 = ((INT32) wsptr[0] - (INT32) wsptr[4]) << CONST_BITS; - - tmp10 = tmp0 + tmp3; - tmp13 = tmp0 - tmp3; - tmp11 = tmp1 + tmp2; - tmp12 = tmp1 - tmp2; - - /* Odd part per figure 8; the matrix is unitary and hence its - * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. - */ - - tmp0 = (INT32) wsptr[7]; - tmp1 = (INT32) wsptr[5]; - tmp2 = (INT32) wsptr[3]; - tmp3 = (INT32) wsptr[1]; - - z1 = tmp0 + tmp3; - z2 = tmp1 + tmp2; - z3 = tmp0 + tmp2; - z4 = tmp1 + tmp3; - z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ - - tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ - tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ - tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ - tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ - z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ - z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ - z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ - z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ - - z3 += z5; - z4 += z5; - - tmp0 += z1 + z3; - tmp1 += z2 + z4; - tmp2 += z2 + z3; - tmp3 += z1 + z4; - - /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[7] = range_limit[(int) DESCALE(tmp10 - tmp3, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp11 + tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[6] = range_limit[(int) DESCALE(tmp11 - tmp2, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE(tmp12 + tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[5] = range_limit[(int) DESCALE(tmp12 - tmp1, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE(tmp13 + tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - outptr[4] = range_limit[(int) DESCALE(tmp13 - tmp0, - CONST_BITS+PASS1_BITS+3) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - -#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/libjpegtwrp/jidctred.c b/libjpegtwrp/jidctred.c deleted file mode 100644 index 421f3c7ca..000000000 --- a/libjpegtwrp/jidctred.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * jidctred.c - * - * Copyright (C) 1994-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains inverse-DCT routines that produce reduced-size output: - * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block. - * - * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M) - * algorithm used in jidctint.c. We simply replace each 8-to-8 1-D IDCT step - * with an 8-to-4 step that produces the four averages of two adjacent outputs - * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output). - * These steps were derived by computing the corresponding values at the end - * of the normal LL&M code, then simplifying as much as possible. - * - * 1x1 is trivial: just take the DC coefficient divided by 8. - * - * See jidctint.c for additional comments. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef IDCT_SCALING_SUPPORTED - - -/* - * This module is specialized to the case DCTSIZE = 8. - */ - -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - - -/* Scaling is the same as in jidctint.c. */ - -#if BITS_IN_JSAMPLE == 8 -#define CONST_BITS 13 -#define PASS1_BITS 2 -#else -#define CONST_BITS 13 -#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ -#endif - -/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus - * causing a lot of useless floating-point operations at run time. - * To get around this we use the following pre-calculated constants. - * If you change CONST_BITS you may want to add appropriate values. - * (With a reasonable C compiler, you can just rely on the FIX() macro...) - */ - -#if CONST_BITS == 13 -#define FIX_0_211164243 ((INT32) 1730) /* FIX(0.211164243) */ -#define FIX_0_509795579 ((INT32) 4176) /* FIX(0.509795579) */ -#define FIX_0_601344887 ((INT32) 4926) /* FIX(0.601344887) */ -#define FIX_0_720959822 ((INT32) 5906) /* FIX(0.720959822) */ -#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ -#define FIX_0_850430095 ((INT32) 6967) /* FIX(0.850430095) */ -#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ -#define FIX_1_061594337 ((INT32) 8697) /* FIX(1.061594337) */ -#define FIX_1_272758580 ((INT32) 10426) /* FIX(1.272758580) */ -#define FIX_1_451774981 ((INT32) 11893) /* FIX(1.451774981) */ -#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ -#define FIX_2_172734803 ((INT32) 17799) /* FIX(2.172734803) */ -#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ -#define FIX_3_624509785 ((INT32) 29692) /* FIX(3.624509785) */ -#else -#define FIX_0_211164243 FIX(0.211164243) -#define FIX_0_509795579 FIX(0.509795579) -#define FIX_0_601344887 FIX(0.601344887) -#define FIX_0_720959822 FIX(0.720959822) -#define FIX_0_765366865 FIX(0.765366865) -#define FIX_0_850430095 FIX(0.850430095) -#define FIX_0_899976223 FIX(0.899976223) -#define FIX_1_061594337 FIX(1.061594337) -#define FIX_1_272758580 FIX(1.272758580) -#define FIX_1_451774981 FIX(1.451774981) -#define FIX_1_847759065 FIX(1.847759065) -#define FIX_2_172734803 FIX(2.172734803) -#define FIX_2_562915447 FIX(2.562915447) -#define FIX_3_624509785 FIX(3.624509785) -#endif - - -/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. - * For 8-bit samples with the recommended scaling, all the variable - * and constant values involved are no more than 16 bits wide, so a - * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. - * For 12-bit samples, a full 32-bit multiplication will be needed. - */ - -#if BITS_IN_JSAMPLE == 8 -#define MULTIPLY(var,const) MULTIPLY16C16(var,const) -#else -#define MULTIPLY(var,const) ((var) * (const)) -#endif - - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 4x4 output block. - */ - -GLOBAL(void) -jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp2, tmp10, tmp12; - INT32 z1, z2, z3, z4; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE*4]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { - /* Don't bother to process column 4, because second pass won't use it */ - if (ctr == DCTSIZE-4) - continue; - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && - inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 && - inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) { - /* AC terms all zero; we need not examine term 4 for 4x4 output */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - wsptr[DCTSIZE*2] = dcval; - wsptr[DCTSIZE*3] = dcval; - - continue; - } - - /* Even part */ - - tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp0 <<= (CONST_BITS+1); - - z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - - tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ - + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ - + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ - + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ - - tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ - + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ - + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ - + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ - - /* Final output stage */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1); - wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1); - } - - /* Pass 2: process 4 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 4; ctr++) { - outptr = output_buf[ctr] + output_col; - /* It's not clear whether a zero row test is worthwhile here ... */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && - wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - outptr[2] = dcval; - outptr[3] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1); - - tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065) - + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865); - - tmp10 = tmp0 + tmp2; - tmp12 = tmp0 - tmp2; - - /* Odd part */ - - z1 = (INT32) wsptr[7]; - z2 = (INT32) wsptr[5]; - z3 = (INT32) wsptr[3]; - z4 = (INT32) wsptr[1]; - - tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ - + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ - + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ - + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ - - tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ - + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ - + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ - + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0, - CONST_BITS+PASS1_BITS+3+1) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 2x2 output block. - */ - -GLOBAL(void) -jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - INT32 tmp0, tmp10, z1; - JCOEFPTR inptr; - ISLOW_MULT_TYPE * quantptr; - int * wsptr; - JSAMPROW outptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - int ctr; - int workspace[DCTSIZE*2]; /* buffers data between passes */ - SHIFT_TEMPS - - /* Pass 1: process columns from input, store into work array. */ - - inptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - wsptr = workspace; - for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { - /* Don't bother to process columns 2,4,6 */ - if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6) - continue; - if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 && - inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) { - /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */ - int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; - - wsptr[DCTSIZE*0] = dcval; - wsptr[DCTSIZE*1] = dcval; - - continue; - } - - /* Even part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); - tmp10 = z1 << (CONST_BITS+2); - - /* Odd part */ - - z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */ - z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ - - /* Final output stage */ - - wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2); - wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2); - } - - /* Pass 2: process 2 rows from work array, store into output array. */ - - wsptr = workspace; - for (ctr = 0; ctr < 2; ctr++) { - outptr = output_buf[ctr] + output_col; - /* It's not clear whether a zero row test is worthwhile here ... */ - -#ifndef NO_ZERO_ROW_TEST - if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) { - /* AC terms all zero */ - JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) - & RANGE_MASK]; - - outptr[0] = dcval; - outptr[1] = dcval; - - wsptr += DCTSIZE; /* advance pointer to next row */ - continue; - } -#endif - - /* Even part */ - - tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2); - - /* Odd part */ - - tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */ - + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */ - + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */ - + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ - - /* Final output stage */ - - outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0, - CONST_BITS+PASS1_BITS+3+2) - & RANGE_MASK]; - outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0, - CONST_BITS+PASS1_BITS+3+2) - & RANGE_MASK]; - - wsptr += DCTSIZE; /* advance pointer to next row */ - } -} - - -/* - * Perform dequantization and inverse DCT on one block of coefficients, - * producing a reduced-size 1x1 output block. - */ - -GLOBAL(void) -jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - int dcval; - ISLOW_MULT_TYPE * quantptr; - JSAMPLE *range_limit = IDCT_range_limit(cinfo); - SHIFT_TEMPS - - /* We hardly need an inverse DCT routine for this: just take the - * average pixel value, which is one-eighth of the DC coefficient. - */ - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - dcval = DEQUANTIZE(coef_block[0], quantptr[0]); - dcval = (int) DESCALE((INT32) dcval, 3); - - output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; -} - -#endif /* IDCT_SCALING_SUPPORTED */ diff --git a/libjpegtwrp/jidctvenum.c b/libjpegtwrp/jidctvenum.c deleted file mode 100644 index f458bb565..000000000 --- a/libjpegtwrp/jidctvenum.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * jidctvenum.c - * - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jdct.h" /* Private declarations for DCT subsystem */ - -#ifdef ANDROID_JPEG_USE_VENUM -/* - * This module is specialized to the case DCTSIZE = 8. - */ -#if DCTSIZE != 8 - Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ -#endif - -/* Dequantize a coefficient by multiplying it by the multiplier-table - * entry; produce an int result. In this module, both inputs and result - * are 16 bits or less, so either int or short multiply will work. - */ - -#define DEQUANTIZE(coef,quantval) ((coef) * ((INT16)quantval)) - -GLOBAL(void) -jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - ISLOW_MULT_TYPE * quantptr; - JCOEFPTR coefptr; - int ctr; - - /* idct_out temp buffer is needed because output_buf sample allocation is 8 bits, - * while IDCT output expects 16 bits. - */ - INT16 idct_out[DCTSIZE2]; /* buffers data between passes */ - JSAMPROW outptr; - INT16* idctptr; - - coefptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - - /* Dequantize the coeff buffer and write it back to the same location */ - for (ctr = DCTSIZE; ctr > 0; ctr--) { - coefptr[0] = DEQUANTIZE(coefptr[0] , quantptr[0] ); - coefptr[DCTSIZE*1] = DEQUANTIZE(coefptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - coefptr[DCTSIZE*2] = DEQUANTIZE(coefptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - coefptr[DCTSIZE*3] = DEQUANTIZE(coefptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - coefptr[DCTSIZE*4] = DEQUANTIZE(coefptr[DCTSIZE*4], quantptr[DCTSIZE*4]); - coefptr[DCTSIZE*5] = DEQUANTIZE(coefptr[DCTSIZE*5], quantptr[DCTSIZE*5]); - coefptr[DCTSIZE*6] = DEQUANTIZE(coefptr[DCTSIZE*6], quantptr[DCTSIZE*6]); - coefptr[DCTSIZE*7] = DEQUANTIZE(coefptr[DCTSIZE*7], quantptr[DCTSIZE*7]); - - /* advance pointers to next column */ - quantptr++; - coefptr++; - } - - idct_8x8_venum((INT16*)coef_block, - (INT16*)idct_out, - DCTSIZE * sizeof(INT16)); - - idctptr = idct_out; - for (ctr = 0; ctr < DCTSIZE; ctr++) { - outptr = output_buf[ctr] + output_col; - // outptr sample size is 1 byte while idctptr sample size is 2 bytes - outptr[0] = idctptr[0]; - outptr[1] = idctptr[1]; - outptr[2] = idctptr[2]; - outptr[3] = idctptr[3]; - outptr[4] = idctptr[4]; - outptr[5] = idctptr[5]; - outptr[6] = idctptr[6]; - outptr[7] = idctptr[7]; - idctptr += DCTSIZE; /* advance pointers to next row */ - } -} - -GLOBAL(void) -jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - ISLOW_MULT_TYPE * quantptr; - JSAMPROW outptr; - - /* Note: Must allocate 8x4 even though only 4x4 is used because - * IDCT function expects stride of 8. Stride input to function is ignored. - */ - INT16 idct_out[DCTSIZE * (DCTSIZE>>1)]; /* buffers data between passes */ - INT16* idctptr; - JCOEFPTR coefptr; - int ctr; - - coefptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - - /* Dequantize the coeff buffer and write it back to the same location */ - for (ctr = (DCTSIZE>>1); ctr > 0; ctr--) { - coefptr[0] = DEQUANTIZE(coefptr[0] , quantptr[0] ); - coefptr[DCTSIZE*1] = DEQUANTIZE(coefptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - coefptr[DCTSIZE*2] = DEQUANTIZE(coefptr[DCTSIZE*2], quantptr[DCTSIZE*2]); - coefptr[DCTSIZE*3] = DEQUANTIZE(coefptr[DCTSIZE*3], quantptr[DCTSIZE*3]); - - /* advance pointers to next column */ - quantptr++; - coefptr++; - } - - idct_4x4_venum((INT16*)coef_block, - (INT16*)idct_out, - DCTSIZE * sizeof(INT16)); - - idctptr = idct_out; - for (ctr = 0; ctr < (DCTSIZE>>1); ctr++) { - outptr = output_buf[ctr] + output_col; - - /* outptr sample size is 1 byte while idctptr sample size is 2 bytes */ - outptr[0] = idctptr[0]; - outptr[1] = idctptr[1]; - outptr[2] = idctptr[2]; - outptr[3] = idctptr[3]; - /* IDCT function assumes stride of 8 units */ - idctptr += (DCTSIZE); /* advance pointers to next row */ - } -} - -GLOBAL(void) -jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - ISLOW_MULT_TYPE * quantptr; - JSAMPROW outptr; - - /* Note: Must allocate 8x2 even though only 2x2 is used because - * IDCT function expects stride of 8. Stride input to function is ignored. - * There is also a hw limitation requiring input size to be 8x2. - */ - INT16 idct_out[DCTSIZE * (DCTSIZE>>2)]; /* buffers data between passes */ - INT16* idctptr; - JCOEFPTR coefptr; - int ctr; - - coefptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - - /* Dequantize the coeff buffer and write it back to the same location */ - for (ctr = (DCTSIZE>>2); ctr > 0; ctr--) { - coefptr[0] = DEQUANTIZE(coefptr[0] , quantptr[0] ); - coefptr[DCTSIZE*1] = DEQUANTIZE(coefptr[DCTSIZE*1], quantptr[DCTSIZE*1]); - - /* advance pointers to next column */ - quantptr++; - coefptr++; - } - - idct_2x2_venum((INT16*)coef_block, - (INT16*)idct_out, - DCTSIZE * sizeof(INT16)); - - idctptr = idct_out; - for (ctr = 0; ctr < (DCTSIZE>>2); ctr++) { - outptr = output_buf[ctr] + output_col; - - /* outptr sample size is 1 bytes, idctptr sample size is 2 bytes */ - outptr[0] = idctptr[0]; - outptr[1] = idctptr[1]; - - /* IDCT function assumes stride of 8 units */ - idctptr += (DCTSIZE); /* advance pointers to next row */ - } -} - - -GLOBAL(void) -jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col) -{ - ISLOW_MULT_TYPE * quantptr; - JSAMPROW outptr; // 8-bit type - INT16 idct_out[DCTSIZE]; /* Required to allocate 8 samples, even though we only use one. */ - JCOEFPTR coefptr; - int ctr; - - coefptr = coef_block; - quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; - outptr = output_buf[0] + output_col; - - /* Dequantize the coeff buffer and write it back to the same location */ - coefptr[0] = DEQUANTIZE(coefptr[0], quantptr[0]); - - idct_1x1_venum((INT16*)coef_block, - (INT16*)idct_out, - DCTSIZE * sizeof(INT16)); - outptr[0] = idct_out[0]; -} - - -#endif /* ANDROID_JPEG_USE_VENUM */ diff --git a/libjpegtwrp/jinclude.h b/libjpegtwrp/jinclude.h deleted file mode 100644 index 0a4f15146..000000000 --- a/libjpegtwrp/jinclude.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * jinclude.h - * - * Copyright (C) 1991-1994, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file exists to provide a single place to fix any problems with - * including the wrong system include files. (Common problems are taken - * care of by the standard jconfig symbols, but on really weird systems - * you may have to edit this file.) - * - * NOTE: this file is NOT intended to be included by applications using the - * JPEG library. Most applications need only include jpeglib.h. - */ - - -/* Include auto-config file to find out which system include files we need. */ - -#include "jconfig.h" /* auto configuration options */ -#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ - -/* - * We need the NULL macro and size_t typedef. - * On an ANSI-conforming system it is sufficient to include . - * Otherwise, we get them from or ; we may have to - * pull in as well. - * Note that the core JPEG library does not require ; - * only the default error handler and data source/destination modules do. - * But we must pull it in because of the references to FILE in jpeglib.h. - * You can remove those references if you want to compile without . - */ - -#ifdef HAVE_STDDEF_H -#include -#endif - -#ifdef HAVE_STDLIB_H -#include -#endif - -#ifdef NEED_SYS_TYPES_H -#include -#endif - -#include - -/* - * We need memory copying and zeroing functions, plus strncpy(). - * ANSI and System V implementations declare these in . - * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). - * Some systems may declare memset and memcpy in . - * - * NOTE: we assume the size parameters to these functions are of type size_t. - * Change the casts in these macros if not! - */ - -#ifdef NEED_BSD_STRINGS - -#include -#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) -#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) - -#else /* not BSD, assume ANSI/SysV string lib */ - -#include -#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) -#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) - -#endif - -/* - * In ANSI C, and indeed any rational implementation, size_t is also the - * type returned by sizeof(). However, it seems there are some irrational - * implementations out there, in which sizeof() returns an int even though - * size_t is defined as long or unsigned long. To ensure consistent results - * we always use this SIZEOF() macro in place of using sizeof() directly. - */ - -#define SIZEOF(object) ((size_t) sizeof(object)) - -/* - * The modules that use fread() and fwrite() always invoke them through - * these macros. On some systems you may need to twiddle the argument casts. - * CAUTION: argument order is different from underlying functions! - */ - -#define JFREAD(file,buf,sizeofbuf) \ - ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) -#define JFWRITE(file,buf,sizeofbuf) \ - ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/libjpegtwrp/jmem-android.c b/libjpegtwrp/jmem-android.c deleted file mode 100644 index 5da4d0a6d..000000000 --- a/libjpegtwrp/jmem-android.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Copyright (C) 2007-2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 10000000L /* default: ten megabyte */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); - /* Since this implementation uses tmpfile() to create the file, - * no explicit file deletion is needed. - */ -} - -static FILE* getTempFileFromPath(const char * path) { - FILE * fd = fopen(path, "w+"); - unlink(path); - return fd; -} - -static FILE* getTempFile() { - char path[1024]; - snprintf(path, 1023, "/sdcard/.%d.tmp", getpid()); - FILE * fd = getTempFileFromPath(path); - if (fd == NULL) { - // anywhere else we can create a temp file? - // snprintf(path, 1023, "/data/data/.%d.tmp", getpid()); - // fd = getTempFileFromPath(path); - } - return fd; -} - -/* - * Initial opening of a backing-store object. - * - * This version uses tmpfile(), which constructs a suitable file name - * behind the scenes. We don't have to use info->temp_name[] at all; - * indeed, we can't even find out the actual name of the temp file. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - if ((info->temp_file = getTempFile()) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/libjpegtwrp/jmem-ashmem.c b/libjpegtwrp/jmem-ashmem.c deleted file mode 100644 index 3a17b02c3..000000000 --- a/libjpegtwrp/jmem-ashmem.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2007-2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#include -#include -#include - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 10000000L /* default: ten megabyte */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - memmove(buffer_address, info->addr + file_offset, byte_count); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - memmove(info->addr + file_offset, buffer_address, byte_count); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - munmap(info->addr, info->size); - close(info->temp_file); -} - -LOCAL(int) -get_ashmem(backing_store_ptr info, long total_bytes_needed) -{ - char path[1024]; - snprintf(path, 1023, "%d.tmp.ashmem", getpid()); - int fd = ashmem_create_region(path, total_bytes_needed); - if (fd == -1) { - return -1; - } - int err = ashmem_set_prot_region(fd, PROT_READ | PROT_WRITE); - if (err) { - return -1; - } - info->addr = mmap(NULL, total_bytes_needed, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); - info->size = total_bytes_needed; - info->temp_file = fd; - return fd; -} - -/* - * Initial opening of a backing-store object. - * This version uses ashmem to get a shared memory of total-bytes_needed. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - if (get_ashmem(info, total_bytes_needed) == -1) - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; -} - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/libjpegtwrp/jmemansi.c b/libjpegtwrp/jmemansi.c deleted file mode 100644 index 2d93e4962..000000000 --- a/libjpegtwrp/jmemansi.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * jmemansi.c - * - * Copyright (C) 1992-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a simple generic implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that you have the ANSI-standard library routine tmpfile(). - * Also, the problem of determining the amount of memory available - * is shoved onto the user. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); - /* Since this implementation uses tmpfile() to create the file, - * no explicit file deletion is needed. - */ -} - - -/* - * Initial opening of a backing-store object. - * - * This version uses tmpfile(), which constructs a suitable file name - * behind the scenes. We don't have to use info->temp_name[] at all; - * indeed, we can't even find out the actual name of the temp file. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - if ((info->temp_file = tmpfile()) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/libjpegtwrp/jmemdos.c b/libjpegtwrp/jmemdos.c deleted file mode 100644 index 60b45c693..000000000 --- a/libjpegtwrp/jmemdos.c +++ /dev/null @@ -1,638 +0,0 @@ -/* - * jmemdos.c - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides an MS-DOS-compatible implementation of the system- - * dependent portion of the JPEG memory manager. Temporary data can be - * stored in extended or expanded memory as well as in regular DOS files. - * - * If you use this file, you must be sure that NEED_FAR_POINTERS is defined - * if you compile in a small-data memory model; it should NOT be defined if - * you use a large-data memory model. This file is not recommended if you - * are using a flat-memory-space 386 environment such as DJGCC or Watcom C. - * Also, this code will NOT work if struct fields are aligned on greater than - * 2-byte boundaries. - * - * Based on code contributed by Ge' Weijers. - */ - -/* - * If you have both extended and expanded memory, you may want to change the - * order in which they are tried in jopen_backing_store. On a 286 machine - * expanded memory is usually faster, since extended memory access involves - * an expensive protected-mode-and-back switch. On 386 and better, extended - * memory is usually faster. As distributed, the code tries extended memory - * first (what? not everyone has a 386? :-). - * - * You can disable use of extended/expanded memory entirely by altering these - * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0). - */ - -#ifndef XMS_SUPPORTED -#define XMS_SUPPORTED 1 -#endif -#ifndef EMS_SUPPORTED -#define EMS_SUPPORTED 1 -#endif - - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare these */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -extern char * getenv JPP((const char * name)); -#endif - -#ifdef NEED_FAR_POINTERS - -#ifdef __TURBOC__ -/* These definitions work for Borland C (Turbo C) */ -#include /* need farmalloc(), farfree() */ -#define far_malloc(x) farmalloc(x) -#define far_free(x) farfree(x) -#else -/* These definitions work for Microsoft C and compatible compilers */ -#include /* need _fmalloc(), _ffree() */ -#define far_malloc(x) _fmalloc(x) -#define far_free(x) _ffree(x) -#endif - -#else /* not NEED_FAR_POINTERS */ - -#define far_malloc(x) malloc(x) -#define far_free(x) free(x) - -#endif /* NEED_FAR_POINTERS */ - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#else -#define READ_BINARY "rb" -#endif - -#ifndef USE_MSDOS_MEMMGR /* make sure user got configuration right */ - You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */ -#endif - -#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */ - MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */ -#endif - - -/* - * Declarations for assembly-language support routines (see jmemdosa.asm). - * - * The functions are declared "far" as are all their pointer arguments; - * this ensures the assembly source code will work regardless of the - * compiler memory model. We assume "short" is 16 bits, "long" is 32. - */ - -typedef void far * XMSDRIVER; /* actually a pointer to code */ -typedef struct { /* registers for calling XMS driver */ - unsigned short ax, dx, bx; - void far * ds_si; - } XMScontext; -typedef struct { /* registers for calling EMS driver */ - unsigned short ax, dx, bx; - void far * ds_si; - } EMScontext; - -extern short far jdos_open JPP((short far * handle, char far * filename)); -extern short far jdos_close JPP((short handle)); -extern short far jdos_seek JPP((short handle, long offset)); -extern short far jdos_read JPP((short handle, void far * buffer, - unsigned short count)); -extern short far jdos_write JPP((short handle, void far * buffer, - unsigned short count)); -extern void far jxms_getdriver JPP((XMSDRIVER far *)); -extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *)); -extern short far jems_available JPP((void)); -extern void far jems_calldriver JPP((EMScontext far *)); - - -/* - * Selection of a file name for a temporary file. - * This is highly system-dependent, and you may want to customize it. - */ - -static int next_file_num; /* to distinguish among several temp files */ - -LOCAL(void) -select_file_name (char * fname) -{ - const char * env; - char * ptr; - FILE * tfile; - - /* Keep generating file names till we find one that's not in use */ - for (;;) { - /* Get temp directory name from environment TMP or TEMP variable; - * if none, use "." - */ - if ((env = (const char *) getenv("TMP")) == NULL) - if ((env = (const char *) getenv("TEMP")) == NULL) - env = "."; - if (*env == '\0') /* null string means "." */ - env = "."; - ptr = fname; /* copy name to fname */ - while (*env != '\0') - *ptr++ = *env++; - if (ptr[-1] != '\\' && ptr[-1] != '/') - *ptr++ = '\\'; /* append backslash if not in env variable */ - /* Append a suitable file name */ - next_file_num++; /* advance counter */ - sprintf(ptr, "JPG%03d.TMP", next_file_num); - /* Probe to see if file name is already in use */ - if ((tfile = fopen(fname, READ_BINARY)) == NULL) - break; - fclose(tfile); /* oops, it's there; close tfile & try again */ - } -} - - -/* - * Near-memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are allocated in far memory, if possible - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) far_malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - far_free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - -/* - * For MS-DOS we support three types of backing storage: - * 1. Conventional DOS files. We access these by direct DOS calls rather - * than via the stdio package. This provides a bit better performance, - * but the real reason is that the buffers to be read or written are FAR. - * The stdio library for small-data memory models can't cope with that. - * 2. Extended memory, accessed per the XMS V2.0 specification. - * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification. - * You'll need copies of those specs to make sense of the related code. - * The specs are available by Internet FTP from the SIMTEL archives - * (oak.oakland.edu and its various mirror sites). See files - * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip. - */ - - -/* - * Access methods for a DOS file. - */ - - -METHODDEF(void) -read_file_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (jdos_seek(info->handle.file_handle, file_offset)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ - if (byte_count > 65535L) /* safety check */ - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - if (jdos_read(info->handle.file_handle, buffer_address, - (unsigned short) byte_count)) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_file_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (jdos_seek(info->handle.file_handle, file_offset)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ - if (byte_count > 65535L) /* safety check */ - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - if (jdos_write(info->handle.file_handle, buffer_address, - (unsigned short) byte_count)) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_file_store (j_common_ptr cinfo, backing_store_ptr info) -{ - jdos_close(info->handle.file_handle); /* close the file */ - remove(info->temp_name); /* delete the file */ -/* If your system doesn't have remove(), try unlink() instead. - * remove() is the ANSI-standard name for this function, but - * unlink() was more common in pre-ANSI systems. - */ - TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); -} - - -LOCAL(boolean) -open_file_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - short handle; - - select_file_name(info->temp_name); - if (jdos_open((short far *) & handle, (char far *) info->temp_name)) { - /* might as well exit since jpeg_open_backing_store will fail anyway */ - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - return FALSE; - } - info->handle.file_handle = handle; - info->read_backing_store = read_file_store; - info->write_backing_store = write_file_store; - info->close_backing_store = close_file_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); - return TRUE; /* succeeded */ -} - - -/* - * Access methods for extended memory. - */ - -#if XMS_SUPPORTED - -static XMSDRIVER xms_driver; /* saved address of XMS driver */ - -typedef union { /* either long offset or real-mode pointer */ - long offset; - void far * ptr; - } XMSPTR; - -typedef struct { /* XMS move specification structure */ - long length; - XMSH src_handle; - XMSPTR src; - XMSH dst_handle; - XMSPTR dst; - } XMSspec; - -#define ODD(X) (((X) & 1L) != 0) - - -METHODDEF(void) -read_xms_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - XMScontext ctx; - XMSspec spec; - char endbuffer[2]; - - /* The XMS driver can't cope with an odd length, so handle the last byte - * specially if byte_count is odd. We don't expect this to be common. - */ - - spec.length = byte_count & (~ 1L); - spec.src_handle = info->handle.xms_handle; - spec.src.offset = file_offset; - spec.dst_handle = 0; - spec.dst.ptr = buffer_address; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x0b00; /* EMB move */ - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - ERREXIT(cinfo, JERR_XMS_READ); - - if (ODD(byte_count)) { - read_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0]; - } -} - - -METHODDEF(void) -write_xms_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - XMScontext ctx; - XMSspec spec; - char endbuffer[2]; - - /* The XMS driver can't cope with an odd length, so handle the last byte - * specially if byte_count is odd. We don't expect this to be common. - */ - - spec.length = byte_count & (~ 1L); - spec.src_handle = 0; - spec.src.ptr = buffer_address; - spec.dst_handle = info->handle.xms_handle; - spec.dst.offset = file_offset; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x0b00; /* EMB move */ - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - ERREXIT(cinfo, JERR_XMS_WRITE); - - if (ODD(byte_count)) { - read_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L]; - write_xms_store(cinfo, info, (void FAR *) endbuffer, - file_offset + byte_count - 1L, 2L); - } -} - - -METHODDEF(void) -close_xms_store (j_common_ptr cinfo, backing_store_ptr info) -{ - XMScontext ctx; - - ctx.dx = info->handle.xms_handle; - ctx.ax = 0x0a00; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle); - /* we ignore any error return from the driver */ -} - - -LOCAL(boolean) -open_xms_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - XMScontext ctx; - - /* Get address of XMS driver */ - jxms_getdriver((XMSDRIVER far *) & xms_driver); - if (xms_driver == NULL) - return FALSE; /* no driver to be had */ - - /* Get version number, must be >= 2.00 */ - ctx.ax = 0x0000; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax < (unsigned short) 0x0200) - return FALSE; - - /* Try to get space (expressed in kilobytes) */ - ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10); - ctx.ax = 0x0900; - jxms_calldriver(xms_driver, (XMScontext far *) & ctx); - if (ctx.ax != 1) - return FALSE; - - /* Succeeded, save the handle and away we go */ - info->handle.xms_handle = ctx.dx; - info->read_backing_store = read_xms_store; - info->write_backing_store = write_xms_store; - info->close_backing_store = close_xms_store; - TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx); - return TRUE; /* succeeded */ -} - -#endif /* XMS_SUPPORTED */ - - -/* - * Access methods for expanded memory. - */ - -#if EMS_SUPPORTED - -/* The EMS move specification structure requires word and long fields aligned - * at odd byte boundaries. Some compilers will align struct fields at even - * byte boundaries. While it's usually possible to force byte alignment, - * that causes an overall performance penalty and may pose problems in merging - * JPEG into a larger application. Instead we accept some rather dirty code - * here. Note this code would fail if the hardware did not allow odd-byte - * word & long accesses, but all 80x86 CPUs do. - */ - -typedef void far * EMSPTR; - -typedef union { /* EMS move specification structure */ - long length; /* It's easy to access first 4 bytes */ - char bytes[18]; /* Misaligned fields in here! */ - } EMSspec; - -/* Macros for accessing misaligned fields */ -#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset]))) -#define SRC_TYPE(spec) FIELD_AT(spec,4,char) -#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH) -#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short) -#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short) -#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR) -#define DST_TYPE(spec) FIELD_AT(spec,11,char) -#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH) -#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short) -#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short) -#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR) - -#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */ - -#define HIBYTE(W) (((W) >> 8) & 0xFF) -#define LOBYTE(W) ((W) & 0xFF) - - -METHODDEF(void) -read_ems_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - EMScontext ctx; - EMSspec spec; - - spec.length = byte_count; - SRC_TYPE(spec) = 1; - SRC_HANDLE(spec) = info->handle.ems_handle; - SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); - SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); - DST_TYPE(spec) = 0; - DST_HANDLE(spec) = 0; - DST_PTR(spec) = buffer_address; - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x5700; /* move memory region */ - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - ERREXIT(cinfo, JERR_EMS_READ); -} - - -METHODDEF(void) -write_ems_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - EMScontext ctx; - EMSspec spec; - - spec.length = byte_count; - SRC_TYPE(spec) = 0; - SRC_HANDLE(spec) = 0; - SRC_PTR(spec) = buffer_address; - DST_TYPE(spec) = 1; - DST_HANDLE(spec) = info->handle.ems_handle; - DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); - DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); - - ctx.ds_si = (void far *) & spec; - ctx.ax = 0x5700; /* move memory region */ - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - ERREXIT(cinfo, JERR_EMS_WRITE); -} - - -METHODDEF(void) -close_ems_store (j_common_ptr cinfo, backing_store_ptr info) -{ - EMScontext ctx; - - ctx.ax = 0x4500; - ctx.dx = info->handle.ems_handle; - jems_calldriver((EMScontext far *) & ctx); - TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle); - /* we ignore any error return from the driver */ -} - - -LOCAL(boolean) -open_ems_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - EMScontext ctx; - - /* Is EMS driver there? */ - if (! jems_available()) - return FALSE; - - /* Get status, make sure EMS is OK */ - ctx.ax = 0x4000; - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - return FALSE; - - /* Get version, must be >= 4.0 */ - ctx.ax = 0x4600; - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40) - return FALSE; - - /* Try to allocate requested space */ - ctx.ax = 0x4300; - ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE); - jems_calldriver((EMScontext far *) & ctx); - if (HIBYTE(ctx.ax) != 0) - return FALSE; - - /* Succeeded, save the handle and away we go */ - info->handle.ems_handle = ctx.dx; - info->read_backing_store = read_ems_store; - info->write_backing_store = write_ems_store; - info->close_backing_store = close_ems_store; - TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx); - return TRUE; /* succeeded */ -} - -#endif /* EMS_SUPPORTED */ - - -/* - * Initial opening of a backing-store object. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - /* Try extended memory, then expanded memory, then regular file. */ -#if XMS_SUPPORTED - if (open_xms_store(cinfo, info, total_bytes_needed)) - return; -#endif -#if EMS_SUPPORTED - if (open_ems_store(cinfo, info, total_bytes_needed)) - return; -#endif - if (open_file_store(cinfo, info, total_bytes_needed)) - return; - ERREXITS(cinfo, JERR_TFILE_CREATE, ""); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; /* initialize temp file name generator */ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* Microsoft C, at least in v6.00A, will not successfully reclaim freed - * blocks of size > 32Kbytes unless we give it a kick in the rear, like so: - */ -#ifdef NEED_FHEAPMIN - _fheapmin(); -#endif -} diff --git a/libjpegtwrp/jmemdosa.asm b/libjpegtwrp/jmemdosa.asm deleted file mode 100644 index ecd43729f..000000000 --- a/libjpegtwrp/jmemdosa.asm +++ /dev/null @@ -1,379 +0,0 @@ -; -; jmemdosa.asm -; -; Copyright (C) 1992, Thomas G. Lane. -; This file is part of the Independent JPEG Group's software. -; For conditions of distribution and use, see the accompanying README file. -; -; This file contains low-level interface routines to support the MS-DOS -; backing store manager (jmemdos.c). Routines are provided to access disk -; files through direct DOS calls, and to access XMS and EMS drivers. -; -; This file should assemble with Microsoft's MASM or any compatible -; assembler (including Borland's Turbo Assembler). If you haven't got -; a compatible assembler, better fall back to jmemansi.c or jmemname.c. -; -; To minimize dependence on the C compiler's register usage conventions, -; we save and restore all 8086 registers, even though most compilers only -; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return -; values, which everybody returns in AX. -; -; Based on code contributed by Ge' Weijers. -; - -JMEMDOSA_TXT segment byte public 'CODE' - - assume cs:JMEMDOSA_TXT - - public _jdos_open - public _jdos_close - public _jdos_seek - public _jdos_read - public _jdos_write - public _jxms_getdriver - public _jxms_calldriver - public _jems_available - public _jems_calldriver - -; -; short far jdos_open (short far * handle, char far * filename) -; -; Create and open a temporary file -; -_jdos_open proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov cx,0 ; normal file attributes - lds dx,dword ptr [bp+10] ; get filename pointer - mov ah,3ch ; create file - int 21h - jc open_err ; if failed, return error code - lds bx,dword ptr [bp+6] ; get handle pointer - mov word ptr [bx],ax ; save the handle - xor ax,ax ; return zero for OK -open_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_open endp - - -; -; short far jdos_close (short handle) -; -; Close the file handle -; -_jdos_close proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - mov ah,3eh ; close file - int 21h - jc close_err ; if failed, return error code - xor ax,ax ; return zero for OK -close_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_close endp - - -; -; short far jdos_seek (short handle, long offset) -; -; Set file position -; -_jdos_seek proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - mov dx,word ptr [bp+8] ; LS offset - mov cx,word ptr [bp+10] ; MS offset - mov ax,4200h ; absolute seek - int 21h - jc seek_err ; if failed, return error code - xor ax,ax ; return zero for OK -seek_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_seek endp - - -; -; short far jdos_read (short handle, void far * buffer, unsigned short count) -; -; Read from file -; -_jdos_read proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - lds dx,dword ptr [bp+8] ; buffer address - mov cx,word ptr [bp+12] ; number of bytes - mov ah,3fh ; read file - int 21h - jc read_err ; if failed, return error code - cmp ax,word ptr [bp+12] ; make sure all bytes were read - je read_ok - mov ax,1 ; else return 1 for not OK - jmp short read_err -read_ok: xor ax,ax ; return zero for OK -read_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_read endp - - -; -; short far jdos_write (short handle, void far * buffer, unsigned short count) -; -; Write to file -; -_jdos_write proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov bx,word ptr [bp+6] ; file handle - lds dx,dword ptr [bp+8] ; buffer address - mov cx,word ptr [bp+12] ; number of bytes - mov ah,40h ; write file - int 21h - jc write_err ; if failed, return error code - cmp ax,word ptr [bp+12] ; make sure all bytes written - je write_ok - mov ax,1 ; else return 1 for not OK - jmp short write_err -write_ok: xor ax,ax ; return zero for OK -write_err: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jdos_write endp - - -; -; void far jxms_getdriver (XMSDRIVER far *) -; -; Get the address of the XMS driver, or NULL if not available -; -_jxms_getdriver proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov ax,4300h ; call multiplex interrupt with - int 2fh ; a magic cookie, hex 4300 - cmp al,80h ; AL should contain hex 80 - je xmsavail - xor dx,dx ; no XMS driver available - xor ax,ax ; return a nil pointer - jmp short xmsavail_done -xmsavail: mov ax,4310h ; fetch driver address with - int 2fh ; another magic cookie - mov dx,es ; copy address to dx:ax - mov ax,bx -xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value - mov word ptr es:[bx],ax - mov word ptr es:[bx+2],dx - pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jxms_getdriver endp - - -; -; void far jxms_calldriver (XMSDRIVER, XMScontext far *) -; -; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers. -; These are loaded, the XMS call is performed, and the new values of the -; AX,DX,BX registers are written back to the context structure. -; -_jxms_calldriver proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - les bx,dword ptr [bp+10] ; get XMScontext pointer - mov ax,word ptr es:[bx] ; load registers - mov dx,word ptr es:[bx+2] - mov si,word ptr es:[bx+6] - mov ds,word ptr es:[bx+8] - mov bx,word ptr es:[bx+4] - call dword ptr [bp+6] ; call the driver - mov cx,bx ; save returned BX for a sec - les bx,dword ptr [bp+10] ; get XMScontext pointer - mov word ptr es:[bx],ax ; put back ax,dx,bx - mov word ptr es:[bx+2],dx - mov word ptr es:[bx+4],cx - pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jxms_calldriver endp - - -; -; short far jems_available (void) -; -; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs) -; -_jems_available proc far - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - mov ax,3567h ; get interrupt vector 67h - int 21h - push cs - pop ds - mov di,000ah ; check offs 10 in returned seg - lea si,ASCII_device_name ; against literal string - mov cx,8 - cld - repe cmpsb - jne no_ems - mov ax,1 ; match, it's there - jmp short avail_done -no_ems: xor ax,ax ; it's not there -avail_done: pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - ret - -ASCII_device_name db "EMMXXXX0" - -_jems_available endp - - -; -; void far jems_calldriver (EMScontext far *) -; -; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers. -; These are loaded, the EMS trap is performed, and the new values of the -; AX,DX,BX registers are written back to the context structure. -; -_jems_calldriver proc far - push bp ; linkage - mov bp,sp - push si ; save all registers for safety - push di - push bx - push cx - push dx - push es - push ds - les bx,dword ptr [bp+6] ; get EMScontext pointer - mov ax,word ptr es:[bx] ; load registers - mov dx,word ptr es:[bx+2] - mov si,word ptr es:[bx+6] - mov ds,word ptr es:[bx+8] - mov bx,word ptr es:[bx+4] - int 67h ; call the EMS driver - mov cx,bx ; save returned BX for a sec - les bx,dword ptr [bp+6] ; get EMScontext pointer - mov word ptr es:[bx],ax ; put back ax,dx,bx - mov word ptr es:[bx+2],dx - mov word ptr es:[bx+4],cx - pop ds ; restore registers and exit - pop es - pop dx - pop cx - pop bx - pop di - pop si - pop bp - ret -_jems_calldriver endp - -JMEMDOSA_TXT ends - - end diff --git a/libjpegtwrp/jmemmac.c b/libjpegtwrp/jmemmac.c deleted file mode 100644 index 106f9bea0..000000000 --- a/libjpegtwrp/jmemmac.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * jmemmac.c - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * jmemmac.c provides an Apple Macintosh implementation of the system- - * dependent portion of the JPEG memory manager. - * - * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the - * JPEG_INTERNALS part of jconfig.h. - * - * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr - * instead of malloc and free. It accurately determines the amount of - * memory available by using CompactMem. Notice that if left to its - * own devices, this code can chew up all available space in the - * application's zone, with the exception of the rather small "slop" - * factor computed in jpeg_mem_available(). The application can ensure - * that more space is left over by reducing max_memory_to_use. - * - * Large images are swapped to disk using temporary files and System 7.0+'s - * temporary folder functionality. - * - * Note that jmemmac.c depends on two features of MacOS that were first - * introduced in System 7: FindFolder and the FSSpec-based calls. - * If your application uses jmemmac.c and is run under System 6 or earlier, - * and the jpeg library decides it needs a temporary file, it will abort, - * printing error messages about requiring System 7. (If no temporary files - * are created, it will run fine.) - * - * If you want to use jmemmac.c in an application that might be used with - * System 6 or earlier, then you should remove dependencies on FindFolder - * and the FSSpec calls. You will need to replace FindFolder with some - * other mechanism for finding a place to put temporary files, and you - * should replace the FSSpec calls with their HFS equivalents: - * - * FSpDelete -> HDelete - * FSpGetFInfo -> HGetFInfo - * FSpCreate -> HCreate - * FSpOpenDF -> HOpen *** Note: not HOpenDF *** - * FSMakeFSSpec -> (fill in spec by hand.) - * - * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen, - * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the - * ages-old problem of names starting with a period.) - * - * Contributed by Sam Bushell (jsam@iagu.on.net) and - * Dan Gildor (gyld@in-touch.com). - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef USE_MAC_MEMMGR /* make sure user got configuration right */ - You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */ -#endif - -#include /* we use the MacOS memory manager */ -#include /* we use the MacOS File stuff */ -#include /* we use the MacOS HFS stuff */ -#include /* for smSystemScript */ -#include /* we use Gestalt to test for specific functionality */ - -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "JPG%03d.TMP" -#endif - -static int next_file_num; /* to distinguish among several temp files */ - - -/* - * Memory allocation and freeing are controlled by the MacOS library - * routines NewPtr() and DisposePtr(), which allocate fixed-address - * storage. Unfortunately, the IJG library isn't smart enough to cope - * with relocatable storage. - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) NewPtr(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - DisposePtr((Ptr) object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: we include FAR keywords in the routine declarations simply for - * consistency with the rest of the IJG code; FAR should expand to empty - * on rational architectures like the Mac. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) NewPtr(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - DisposePtr((Ptr) object); -} - - -/* - * This routine computes the total memory space available for allocation. - */ - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - long limit = cinfo->mem->max_memory_to_use - already_allocated; - long slop, mem; - - /* Don't ask for more than what application has told us we may use */ - if (max_bytes_needed > limit && limit > 0) - max_bytes_needed = limit; - /* Find whether there's a big enough free block in the heap. - * CompactMem tries to create a contiguous block of the requested size, - * and then returns the size of the largest free block (which could be - * much more or much less than we asked for). - * We add some slop to ensure we don't use up all available memory. - */ - slop = max_bytes_needed / 16 + 32768L; - mem = CompactMem(max_bytes_needed + slop) - slop; - if (mem < 0) - mem = 0; /* sigh, couldn't even get the slop */ - /* Don't take more than the application says we can have */ - if (mem > limit && limit > 0) - mem = limit; - return mem; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - long bytes = byte_count; - long retVal; - - if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) - ERREXIT(cinfo, JERR_TFILE_SEEK); - - retVal = FSRead ( info->temp_file, &bytes, - (unsigned char *) buffer_address ); - if ( retVal != noErr || bytes != byte_count ) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - long bytes = byte_count; - long retVal; - - if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) - ERREXIT(cinfo, JERR_TFILE_SEEK); - - retVal = FSWrite ( info->temp_file, &bytes, - (unsigned char *) buffer_address ); - if ( retVal != noErr || bytes != byte_count ) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - FSClose ( info->temp_file ); - FSpDelete ( &(info->tempSpec) ); -} - - -/* - * Initial opening of a backing-store object. - * - * This version uses FindFolder to find the Temporary Items folder, - * and puts the temporary file in there. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - short tmpRef, vRefNum; - long dirID; - FInfo finderInfo; - FSSpec theSpec; - Str255 fName; - OSErr osErr; - long gestaltResponse = 0; - - /* Check that FSSpec calls are available. */ - osErr = Gestalt( gestaltFSAttr, &gestaltResponse ); - if ( ( osErr != noErr ) - || !( gestaltResponse & (1<temp_name, TEMP_FILE_NAME, next_file_num); - strcpy ( (Ptr)fName+1, info->temp_name ); - *fName = strlen (info->temp_name); - osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec ); - - if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr ) - break; - } - - osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript ); - if ( osErr != noErr ) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - - osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) ); - if ( osErr != noErr ) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - - info->tempSpec = theSpec; - - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; - - /* max_memory_to_use will be initialized to FreeMem()'s result; - * the calling application might later reduce it, for example - * to leave room to invoke multiple JPEG objects. - * Note that FreeMem returns the total number of free bytes; - * it may not be possible to allocate a single block of this size. - */ - return FreeMem(); -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/libjpegtwrp/jmemmgr.c b/libjpegtwrp/jmemmgr.c deleted file mode 100644 index d801b322d..000000000 --- a/libjpegtwrp/jmemmgr.c +++ /dev/null @@ -1,1118 +0,0 @@ -/* - * jmemmgr.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains the JPEG system-independent memory management - * routines. This code is usable across a wide variety of machines; most - * of the system dependencies have been isolated in a separate file. - * The major functions provided here are: - * * pool-based allocation and freeing of memory; - * * policy decisions about how to divide available memory among the - * virtual arrays; - * * control logic for swapping virtual arrays between main memory and - * backing storage. - * The separate system-dependent file provides the actual backing-storage - * access code, and it contains the policy decision about how much total - * main memory to use. - * This file is system-dependent in the sense that some of its functions - * are unnecessary in some systems. For example, if there is enough virtual - * memory so that backing storage will never be used, much of the virtual - * array control logic could be removed. (Of course, if you have that much - * memory then you shouldn't care about a little bit of unused code...) - */ - -#define JPEG_INTERNALS -#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef NO_GETENV -#ifndef HAVE_STDLIB_H /* should declare getenv() */ -extern char * getenv JPP((const char * name)); -#endif -#endif - - -/* - * Some important notes: - * The allocation routines provided here must never return NULL. - * They should exit to error_exit if unsuccessful. - * - * It's not a good idea to try to merge the sarray and barray routines, - * even though they are textually almost the same, because samples are - * usually stored as bytes while coefficients are shorts or ints. Thus, - * in machines where byte pointers have a different representation from - * word pointers, the resulting machine code could not be the same. - */ - - -/* - * Many machines require storage alignment: longs must start on 4-byte - * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() - * always returns pointers that are multiples of the worst-case alignment - * requirement, and we had better do so too. - * There isn't any really portable way to determine the worst-case alignment - * requirement. This module assumes that the alignment requirement is - * multiples of sizeof(ALIGN_TYPE). - * By default, we define ALIGN_TYPE as double. This is necessary on some - * workstations (where doubles really do need 8-byte alignment) and will work - * fine on nearly everything. If your machine has lesser alignment needs, - * you can save a few bytes by making ALIGN_TYPE smaller. - * The only place I know of where this will NOT work is certain Macintosh - * 680x0 compilers that define double as a 10-byte IEEE extended float. - * Doing 10-byte alignment is counterproductive because longwords won't be - * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have - * such a compiler. - */ - -#ifndef ALIGN_TYPE /* so can override from jconfig.h */ -#define ALIGN_TYPE double -#endif - - -/* - * We allocate objects from "pools", where each pool is gotten with a single - * request to jpeg_get_small() or jpeg_get_large(). There is no per-object - * overhead within a pool, except for alignment padding. Each pool has a - * header with a link to the next pool of the same class. - * Small and large pool headers are identical except that the latter's - * link pointer must be FAR on 80x86 machines. - * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE - * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple - * of the alignment requirement of ALIGN_TYPE. - */ - -typedef union small_pool_struct * small_pool_ptr; - -typedef union small_pool_struct { - struct { - small_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} small_pool_hdr; - -typedef union large_pool_struct FAR * large_pool_ptr; - -typedef union large_pool_struct { - struct { - large_pool_ptr next; /* next in list of pools */ - size_t bytes_used; /* how many bytes already used within pool */ - size_t bytes_left; /* bytes still available in this pool */ - } hdr; - ALIGN_TYPE dummy; /* included in union to ensure alignment */ -} large_pool_hdr; - - -/* - * Here is the full definition of a memory manager object. - */ - -typedef struct { - struct jpeg_memory_mgr pub; /* public fields */ - - /* Each pool identifier (lifetime class) names a linked list of pools. */ - small_pool_ptr small_list[JPOOL_NUMPOOLS]; - large_pool_ptr large_list[JPOOL_NUMPOOLS]; - - /* Since we only have one lifetime class of virtual arrays, only one - * linked list is necessary (for each datatype). Note that the virtual - * array control blocks being linked together are actually stored somewhere - * in the small-pool list. - */ - jvirt_sarray_ptr virt_sarray_list; - jvirt_barray_ptr virt_barray_list; - - /* This counts total space obtained from jpeg_get_small/large */ - long total_space_allocated; - - /* alloc_sarray and alloc_barray set this value for use by virtual - * array routines. - */ - JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ -} my_memory_mgr; - -typedef my_memory_mgr * my_mem_ptr; - - -/* - * The control blocks for virtual arrays. - * Note that these blocks are allocated in the "small" pool area. - * System-dependent info for the associated backing store (if any) is hidden - * inside the backing_store_info struct. - */ - -struct jvirt_sarray_control { - JSAMPARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_sarray_ptr next; /* link to next virtual sarray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - -struct jvirt_barray_control { - JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ - JDIMENSION rows_in_array; /* total virtual array height */ - JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ - JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ - JDIMENSION rows_in_mem; /* height of memory buffer */ - JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ - JDIMENSION cur_start_row; /* first logical row # in the buffer */ - JDIMENSION first_undef_row; /* row # of first uninitialized row */ - boolean pre_zero; /* pre-zero mode requested? */ - boolean dirty; /* do current buffer contents need written? */ - boolean b_s_open; /* is backing-store data valid? */ - jvirt_barray_ptr next; /* link to next virtual barray control block */ - backing_store_info b_s_info; /* System-dependent control info */ -}; - - -#ifdef MEM_STATS /* optional extra stuff for statistics */ - -LOCAL(void) -print_mem_stats (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - - /* Since this is only a debugging stub, we can cheat a little by using - * fprintf directly rather than going through the trace message code. - * This is helpful because message parm array can't handle longs. - */ - fprintf(stderr, "Freeing pool %d, total space = %ld\n", - pool_id, mem->total_space_allocated); - - for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; - lhdr_ptr = lhdr_ptr->hdr.next) { - fprintf(stderr, " Large chunk used %ld\n", - (long) lhdr_ptr->hdr.bytes_used); - } - - for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; - shdr_ptr = shdr_ptr->hdr.next) { - fprintf(stderr, " Small chunk used %ld free %ld\n", - (long) shdr_ptr->hdr.bytes_used, - (long) shdr_ptr->hdr.bytes_left); - } -} - -#endif /* MEM_STATS */ - - -LOCAL(void) -out_of_memory (j_common_ptr cinfo, int which) -/* Report an out-of-memory error and stop execution */ -/* If we compiled MEM_STATS support, report alloc requests before dying */ -{ -#ifdef MEM_STATS - cinfo->err->trace_level = 2; /* force self_destruct to report stats */ -#endif - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); -} - - -/* - * Allocation of "small" objects. - * - * For these, we use pooled storage. When a new pool must be created, - * we try to get enough space for the current request plus a "slop" factor, - * where the slop will be the amount of leftover space in the new pool. - * The speed vs. space tradeoff is largely determined by the slop values. - * A different slop value is provided for each pool class (lifetime), - * and we also distinguish the first pool of a class from later ones. - * NOTE: the values given work fairly well on both 16- and 32-bit-int - * machines, but may be too small if longs are 64 bits or more. - */ - -static const size_t first_pool_slop[JPOOL_NUMPOOLS] = -{ - 1600, /* first PERMANENT pool */ - 16000 /* first IMAGE pool */ -}; - -static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = -{ - 0, /* additional PERMANENT pools */ - 5000 /* additional IMAGE pools */ -}; - -#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ - - -METHODDEF(void *) -alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "small" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr hdr_ptr, prev_hdr_ptr; - char * data_ptr; - size_t odd_bytes, min_request, slop; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) - out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* See if space is available in any existing pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - prev_hdr_ptr = NULL; - hdr_ptr = mem->small_list[pool_id]; - while (hdr_ptr != NULL) { - if (hdr_ptr->hdr.bytes_left >= sizeofobject) - break; /* found pool with enough space */ - prev_hdr_ptr = hdr_ptr; - hdr_ptr = hdr_ptr->hdr.next; - } - - /* Time to make a new pool? */ - if (hdr_ptr == NULL) { - /* min_request is what we need now, slop is what will be leftover */ - min_request = sizeofobject + SIZEOF(small_pool_hdr); - if (prev_hdr_ptr == NULL) /* first pool in class? */ - slop = first_pool_slop[pool_id]; - else - slop = extra_pool_slop[pool_id]; - /* Don't ask for more than MAX_ALLOC_CHUNK */ - if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) - slop = (size_t) (MAX_ALLOC_CHUNK-min_request); - /* Try to get space, if fail reduce slop and try again */ - for (;;) { - hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); - if (hdr_ptr != NULL) - break; - slop /= 2; - if (slop < MIN_SLOP) /* give up when it gets real small */ - out_of_memory(cinfo, 2); /* jpeg_get_small failed */ - } - mem->total_space_allocated += min_request + slop; - /* Success, initialize the new pool header and add to end of list */ - hdr_ptr->hdr.next = NULL; - hdr_ptr->hdr.bytes_used = 0; - hdr_ptr->hdr.bytes_left = sizeofobject + slop; - if (prev_hdr_ptr == NULL) /* first pool in class? */ - mem->small_list[pool_id] = hdr_ptr; - else - prev_hdr_ptr->hdr.next = hdr_ptr; - } - - /* OK, allocate the object from the current pool */ - data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ - data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ - hdr_ptr->hdr.bytes_used += sizeofobject; - hdr_ptr->hdr.bytes_left -= sizeofobject; - - return (void *) data_ptr; -} - - -/* - * Allocation of "large" objects. - * - * The external semantics of these are the same as "small" objects, - * except that FAR pointers are used on 80x86. However the pool - * management heuristics are quite different. We assume that each - * request is large enough that it may as well be passed directly to - * jpeg_get_large; the pool management just links everything together - * so that we can free it all on demand. - * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY - * structures. The routines that create these structures (see below) - * deliberately bunch rows together to ensure a large request size. - */ - -METHODDEF(void FAR *) -alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) -/* Allocate a "large" object */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - large_pool_ptr hdr_ptr; - size_t odd_bytes; - - /* Check for unsatisfiable request (do now to ensure no overflow below) */ - if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) - out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ - - /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ - odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); - if (odd_bytes > 0) - sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; - - /* Always make a new pool */ - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + - SIZEOF(large_pool_hdr)); - if (hdr_ptr == NULL) - out_of_memory(cinfo, 4); /* jpeg_get_large failed */ - mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); - - /* Success, initialize the new pool header and add to list */ - hdr_ptr->hdr.next = mem->large_list[pool_id]; - /* We maintain space counts in each pool header for statistical purposes, - * even though they are not needed for allocation. - */ - hdr_ptr->hdr.bytes_used = sizeofobject; - hdr_ptr->hdr.bytes_left = 0; - mem->large_list[pool_id] = hdr_ptr; - - return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ -} - - -/* - * Creation of 2-D sample arrays. - * The pointers are in near heap, the samples themselves in FAR heap. - * - * To minimize allocation overhead and to allow I/O of large contiguous - * blocks, we allocate the sample rows in groups of as many rows as possible - * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. - * NB: the virtual array control routines, later in this file, know about - * this chunking of rows. The rowsperchunk value is left in the mem manager - * object so that it can be saved away if this sarray is the workspace for - * a virtual array. - */ - -METHODDEF(JSAMPARRAY) -alloc_sarray (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, JDIMENSION numrows) -/* Allocate a 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JSAMPARRAY result; - JSAMPROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) samplesperrow * SIZEOF(JSAMPLE)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JSAMPARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JSAMPROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JSAMPROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow - * SIZEOF(JSAMPLE))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += samplesperrow; - } - } - - return result; -} - - -/* - * Creation of 2-D coefficient-block arrays. - * This is essentially the same as the code for sample arrays, above. - */ - -METHODDEF(JBLOCKARRAY) -alloc_barray (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, JDIMENSION numrows) -/* Allocate a 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - JBLOCKARRAY result; - JBLOCKROW workspace; - JDIMENSION rowsperchunk, currow, i; - long ltemp; - - /* Calculate max # of rows allowed in one allocation chunk */ - ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / - ((long) blocksperrow * SIZEOF(JBLOCK)); - if (ltemp <= 0) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - if (ltemp < (long) numrows) - rowsperchunk = (JDIMENSION) ltemp; - else - rowsperchunk = numrows; - mem->last_rowsperchunk = rowsperchunk; - - /* Get space for row pointers (small object) */ - result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, - (size_t) (numrows * SIZEOF(JBLOCKROW))); - - /* Get the rows themselves (large objects) */ - currow = 0; - while (currow < numrows) { - rowsperchunk = MIN(rowsperchunk, numrows - currow); - workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, - (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow - * SIZEOF(JBLOCK))); - for (i = rowsperchunk; i > 0; i--) { - result[currow++] = workspace; - workspace += blocksperrow; - } - } - - return result; -} - - -/* - * About virtual array management: - * - * The above "normal" array routines are only used to allocate strip buffers - * (as wide as the image, but just a few rows high). Full-image-sized buffers - * are handled as "virtual" arrays. The array is still accessed a strip at a - * time, but the memory manager must save the whole array for repeated - * accesses. The intended implementation is that there is a strip buffer in - * memory (as high as is possible given the desired memory limit), plus a - * backing file that holds the rest of the array. - * - * The request_virt_array routines are told the total size of the image and - * the maximum number of rows that will be accessed at once. The in-memory - * buffer must be at least as large as the maxaccess value. - * - * The request routines create control blocks but not the in-memory buffers. - * That is postponed until realize_virt_arrays is called. At that time the - * total amount of space needed is known (approximately, anyway), so free - * memory can be divided up fairly. - * - * The access_virt_array routines are responsible for making a specific strip - * area accessible (after reading or writing the backing file, if necessary). - * Note that the access routines are told whether the caller intends to modify - * the accessed strip; during a read-only pass this saves having to rewrite - * data to disk. The access routines are also responsible for pre-zeroing - * any newly accessed rows, if pre-zeroing was requested. - * - * In current usage, the access requests are usually for nonoverlapping - * strips; that is, successive access start_row numbers differ by exactly - * num_rows = maxaccess. This means we can get good performance with simple - * buffer dump/reload logic, by making the in-memory buffer be a multiple - * of the access height; then there will never be accesses across bufferload - * boundaries. The code will still work with overlapping access requests, - * but it doesn't handle bufferload overlaps very efficiently. - */ - - -METHODDEF(jvirt_sarray_ptr) -request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION samplesperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D sample array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_sarray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_sarray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->samplesperrow = samplesperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ - mem->virt_sarray_list = result; - - return result; -} - - -METHODDEF(jvirt_barray_ptr) -request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, - JDIMENSION blocksperrow, JDIMENSION numrows, - JDIMENSION maxaccess) -/* Request a virtual 2-D coefficient-block array */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - jvirt_barray_ptr result; - - /* Only IMAGE-lifetime virtual arrays are currently supported */ - if (pool_id != JPOOL_IMAGE) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - - /* get control block */ - result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, - SIZEOF(struct jvirt_barray_control)); - - result->mem_buffer = NULL; /* marks array not yet realized */ - result->rows_in_array = numrows; - result->blocksperrow = blocksperrow; - result->maxaccess = maxaccess; - result->pre_zero = pre_zero; - result->b_s_open = FALSE; /* no associated backing-store object */ - result->next = mem->virt_barray_list; /* add to list of virtual arrays */ - mem->virt_barray_list = result; - - return result; -} - - -METHODDEF(void) -realize_virt_arrays (j_common_ptr cinfo) -/* Allocate the in-memory buffers for any unrealized virtual arrays */ -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - long space_per_minheight, maximum_space, avail_mem; - long minheights, max_minheights; - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - /* Compute the minimum space needed (maxaccess rows in each buffer) - * and the maximum space needed (full image height in each buffer). - * These may be of use to the system-dependent jpeg_mem_available routine. - */ - space_per_minheight = 0; - maximum_space = 0; - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) sptr->maxaccess * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - maximum_space += (long) sptr->rows_in_array * - (long) sptr->samplesperrow * SIZEOF(JSAMPLE); - } - } - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - space_per_minheight += (long) bptr->maxaccess * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - maximum_space += (long) bptr->rows_in_array * - (long) bptr->blocksperrow * SIZEOF(JBLOCK); - } - } - - if (space_per_minheight <= 0) - return; /* no unrealized arrays, no work */ - - /* Determine amount of memory to actually use; this is system-dependent. */ - avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, - mem->total_space_allocated); - - /* If the maximum space needed is available, make all the buffers full - * height; otherwise parcel it out with the same number of minheights - * in each buffer. - */ - if (avail_mem >= maximum_space) - max_minheights = 1000000000L; - else { - max_minheights = avail_mem / space_per_minheight; - /* If there doesn't seem to be enough space, try to get the minimum - * anyway. This allows a "stub" implementation of jpeg_mem_available(). - */ - if (max_minheights <= 0) - max_minheights = 1; - } - - /* Allocate the in-memory buffers and initialize backing store as needed. */ - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - sptr->rows_in_mem = sptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); - jpeg_open_backing_store(cinfo, & sptr->b_s_info, - (long) sptr->rows_in_array * - (long) sptr->samplesperrow * - (long) SIZEOF(JSAMPLE)); - sptr->b_s_open = TRUE; - } - sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, - sptr->samplesperrow, sptr->rows_in_mem); - sptr->rowsperchunk = mem->last_rowsperchunk; - sptr->cur_start_row = 0; - sptr->first_undef_row = 0; - sptr->dirty = FALSE; - } - } - - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->mem_buffer == NULL) { /* if not realized yet */ - minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; - if (minheights <= max_minheights) { - /* This buffer fits in memory */ - bptr->rows_in_mem = bptr->rows_in_array; - } else { - /* It doesn't fit in memory, create backing store. */ - bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); - jpeg_open_backing_store(cinfo, & bptr->b_s_info, - (long) bptr->rows_in_array * - (long) bptr->blocksperrow * - (long) SIZEOF(JBLOCK)); - bptr->b_s_open = TRUE; - } - bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, - bptr->blocksperrow, bptr->rows_in_mem); - bptr->rowsperchunk = mem->last_rowsperchunk; - bptr->cur_start_row = 0; - bptr->first_undef_row = 0; - bptr->dirty = FALSE; - } - } -} - - -LOCAL(void) -do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual sample array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -LOCAL(void) -do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) -/* Do backing store read or write of a virtual coefficient-block array */ -{ - long bytesperrow, file_offset, byte_count, rows, thisrow, i; - - bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); - file_offset = ptr->cur_start_row * bytesperrow; - /* Loop to read or write each allocation chunk in mem_buffer */ - for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { - /* One chunk, but check for short chunk at end of buffer */ - rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); - /* Transfer no more than is currently defined */ - thisrow = (long) ptr->cur_start_row + i; - rows = MIN(rows, (long) ptr->first_undef_row - thisrow); - /* Transfer no more than fits in file */ - rows = MIN(rows, (long) ptr->rows_in_array - thisrow); - if (rows <= 0) /* this chunk might be past end of file! */ - break; - byte_count = rows * bytesperrow; - if (writing) - (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - else - (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, - (void FAR *) ptr->mem_buffer[i], - file_offset, byte_count); - file_offset += byte_count; - } -} - - -METHODDEF(JSAMPARRAY) -access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual sample array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_sarray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_sarray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -METHODDEF(JBLOCKARRAY) -access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, - JDIMENSION start_row, JDIMENSION num_rows, - boolean writable) -/* Access the part of a virtual block array starting at start_row */ -/* and extending for num_rows rows. writable is true if */ -/* caller intends to modify the accessed area. */ -{ - JDIMENSION end_row = start_row + num_rows; - JDIMENSION undef_row; - - /* debugging check */ - if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || - ptr->mem_buffer == NULL) - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - - /* Make the desired part of the virtual array accessible */ - if (start_row < ptr->cur_start_row || - end_row > ptr->cur_start_row+ptr->rows_in_mem) { - if (! ptr->b_s_open) - ERREXIT(cinfo, JERR_VIRTUAL_BUG); - /* Flush old buffer contents if necessary */ - if (ptr->dirty) { - do_barray_io(cinfo, ptr, TRUE); - ptr->dirty = FALSE; - } - /* Decide what part of virtual array to access. - * Algorithm: if target address > current window, assume forward scan, - * load starting at target address. If target address < current window, - * assume backward scan, load so that target area is top of window. - * Note that when switching from forward write to forward read, will have - * start_row = 0, so the limiting case applies and we load from 0 anyway. - */ - if (start_row > ptr->cur_start_row) { - ptr->cur_start_row = start_row; - } else { - /* use long arithmetic here to avoid overflow & unsigned problems */ - long ltemp; - - ltemp = (long) end_row - (long) ptr->rows_in_mem; - if (ltemp < 0) - ltemp = 0; /* don't fall off front end of file */ - ptr->cur_start_row = (JDIMENSION) ltemp; - } - /* Read in the selected part of the array. - * During the initial write pass, we will do no actual read - * because the selected part is all undefined. - */ - do_barray_io(cinfo, ptr, FALSE); - } - /* Ensure the accessed part of the array is defined; prezero if needed. - * To improve locality of access, we only prezero the part of the array - * that the caller is about to access, not the entire in-memory array. - */ - if (ptr->first_undef_row < end_row) { - if (ptr->first_undef_row < start_row) { - if (writable) /* writer skipped over a section of array */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - undef_row = start_row; /* but reader is allowed to read ahead */ - } else { - undef_row = ptr->first_undef_row; - } - if (writable) - ptr->first_undef_row = end_row; - if (ptr->pre_zero) { - size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); - undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ - end_row -= ptr->cur_start_row; - while (undef_row < end_row) { - jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); - undef_row++; - } - } else { - if (! writable) /* reader looking at undefined data */ - ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); - } - } - /* Flag the buffer dirty if caller will write in it */ - if (writable) - ptr->dirty = TRUE; - /* Return address of proper part of the buffer */ - return ptr->mem_buffer + (start_row - ptr->cur_start_row); -} - - -/* - * Release all objects belonging to a specified pool. - */ - -METHODDEF(void) -free_pool (j_common_ptr cinfo, int pool_id) -{ - my_mem_ptr mem = (my_mem_ptr) cinfo->mem; - small_pool_ptr shdr_ptr; - large_pool_ptr lhdr_ptr; - size_t space_freed; - - if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) - ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ - -#ifdef MEM_STATS - if (cinfo->err->trace_level > 1) - print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ -#endif - - /* If freeing IMAGE pool, close any virtual arrays first */ - if (pool_id == JPOOL_IMAGE) { - jvirt_sarray_ptr sptr; - jvirt_barray_ptr bptr; - - for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { - if (sptr->b_s_open) { /* there may be no backing store */ - sptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); - } - } - mem->virt_sarray_list = NULL; - for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { - if (bptr->b_s_open) { /* there may be no backing store */ - bptr->b_s_open = FALSE; /* prevent recursive close if error */ - (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); - } - } - mem->virt_barray_list = NULL; - } - - /* Release large objects */ - lhdr_ptr = mem->large_list[pool_id]; - mem->large_list[pool_id] = NULL; - - while (lhdr_ptr != NULL) { - large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; - space_freed = lhdr_ptr->hdr.bytes_used + - lhdr_ptr->hdr.bytes_left + - SIZEOF(large_pool_hdr); - jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); - mem->total_space_allocated -= space_freed; - lhdr_ptr = next_lhdr_ptr; - } - - /* Release small objects */ - shdr_ptr = mem->small_list[pool_id]; - mem->small_list[pool_id] = NULL; - - while (shdr_ptr != NULL) { - small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; - space_freed = shdr_ptr->hdr.bytes_used + - shdr_ptr->hdr.bytes_left + - SIZEOF(small_pool_hdr); - jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); - mem->total_space_allocated -= space_freed; - shdr_ptr = next_shdr_ptr; - } -} - - -/* - * Close up shop entirely. - * Note that this cannot be called unless cinfo->mem is non-NULL. - */ - -METHODDEF(void) -self_destruct (j_common_ptr cinfo) -{ - int pool; - - /* Close all backing store, release all memory. - * Releasing pools in reverse order might help avoid fragmentation - * with some (brain-damaged) malloc libraries. - */ - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - free_pool(cinfo, pool); - } - - /* Release the memory manager control block too. */ - jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); - cinfo->mem = NULL; /* ensures I will be called only once */ - - jpeg_mem_term(cinfo); /* system-dependent cleanup */ -} - - -/* - * Memory manager initialization. - * When this is called, only the error manager pointer is valid in cinfo! - */ - -GLOBAL(void) -jinit_memory_mgr (j_common_ptr cinfo) -{ - my_mem_ptr mem; - long max_to_use; - int pool; - size_t test_mac; - - cinfo->mem = NULL; /* for safety if init fails */ - - /* Check for configuration errors. - * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably - * doesn't reflect any real hardware alignment requirement. - * The test is a little tricky: for X>0, X and X-1 have no one-bits - * in common if and only if X is a power of 2, ie has only one one-bit. - * Some compilers may give an "unreachable code" warning here; ignore it. - */ - if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) - ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); - /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be - * a multiple of SIZEOF(ALIGN_TYPE). - * Again, an "unreachable code" warning may be ignored here. - * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. - */ - test_mac = (size_t) MAX_ALLOC_CHUNK; - if ((long) test_mac != MAX_ALLOC_CHUNK || - (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) - ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); - - max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ - - /* Attempt to allocate memory manager's control block */ - mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); - - if (mem == NULL) { - jpeg_mem_term(cinfo); /* system-dependent cleanup */ - ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); - } - - /* OK, fill in the method pointers */ - mem->pub.alloc_small = alloc_small; - mem->pub.alloc_large = alloc_large; - mem->pub.alloc_sarray = alloc_sarray; - mem->pub.alloc_barray = alloc_barray; - mem->pub.request_virt_sarray = request_virt_sarray; - mem->pub.request_virt_barray = request_virt_barray; - mem->pub.realize_virt_arrays = realize_virt_arrays; - mem->pub.access_virt_sarray = access_virt_sarray; - mem->pub.access_virt_barray = access_virt_barray; - mem->pub.free_pool = free_pool; - mem->pub.self_destruct = self_destruct; - - /* Make MAX_ALLOC_CHUNK accessible to other modules */ - mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK; - - /* Initialize working state */ - mem->pub.max_memory_to_use = max_to_use; - - for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { - mem->small_list[pool] = NULL; - mem->large_list[pool] = NULL; - } - mem->virt_sarray_list = NULL; - mem->virt_barray_list = NULL; - - mem->total_space_allocated = SIZEOF(my_memory_mgr); - - /* Declare ourselves open for business */ - cinfo->mem = & mem->pub; - - /* Check for an environment variable JPEGMEM; if found, override the - * default max_memory setting from jpeg_mem_init. Note that the - * surrounding application may again override this value. - * If your system doesn't support getenv(), define NO_GETENV to disable - * this feature. - */ -#ifndef NO_GETENV - { char * memenv; - - if ((memenv = getenv("JPEGMEM")) != NULL) { - char ch = 'x'; - - if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { - if (ch == 'm' || ch == 'M') - max_to_use *= 1000L; - mem->pub.max_memory_to_use = max_to_use * 1000L; - } - } - } -#endif - -} diff --git a/libjpegtwrp/jmemname.c b/libjpegtwrp/jmemname.c deleted file mode 100644 index ed96dee1b..000000000 --- a/libjpegtwrp/jmemname.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * jmemname.c - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a generic implementation of the system-dependent - * portion of the JPEG memory manager. This implementation assumes that - * you must explicitly construct a name for each temp file. - * Also, the problem of determining the amount of memory available - * is shoved onto the user. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - -#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ -#define SEEK_SET 0 /* if not, assume 0 is correct */ -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define RW_BINARY "w+" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define RW_BINARY "w+b", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define RW_BINARY "w+b" -#endif -#endif - - -/* - * Selection of a file name for a temporary file. - * This is system-dependent! - * - * The code as given is suitable for most Unix systems, and it is easily - * modified for most non-Unix systems. Some notes: - * 1. The temp file is created in the directory named by TEMP_DIRECTORY. - * The default value is /usr/tmp, which is the conventional place for - * creating large temp files on Unix. On other systems you'll probably - * want to change the file location. You can do this by editing the - * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h. - * - * 2. If you need to change the file name as well as its location, - * you can override the TEMP_FILE_NAME macro. (Note that this is - * actually a printf format string; it must contain %s and %d.) - * Few people should need to do this. - * - * 3. mktemp() is used to ensure that multiple processes running - * simultaneously won't select the same file names. If your system - * doesn't have mktemp(), define NO_MKTEMP to do it the hard way. - * (If you don't have , also define NO_ERRNO_H.) - * - * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c - * will cause the temp files to be removed if you stop the program early. - */ - -#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */ -#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */ -#endif - -static int next_file_num; /* to distinguish among several temp files */ - -#ifdef NO_MKTEMP - -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "%sJPG%03d.TMP" -#endif - -#ifndef NO_ERRNO_H -#include /* to define ENOENT */ -#endif - -/* ANSI C specifies that errno is a macro, but on older systems it's more - * likely to be a plain int variable. And not all versions of errno.h - * bother to declare it, so we have to in order to be most portable. Thus: - */ -#ifndef errno -extern int errno; -#endif - - -LOCAL(void) -select_file_name (char * fname) -{ - FILE * tfile; - - /* Keep generating file names till we find one that's not in use */ - for (;;) { - next_file_num++; /* advance counter */ - sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); - if ((tfile = fopen(fname, READ_BINARY)) == NULL) { - /* fopen could have failed for a reason other than the file not - * being there; for example, file there but unreadable. - * If isn't available, then we cannot test the cause. - */ -#ifdef ENOENT - if (errno != ENOENT) - continue; -#endif - break; - } - fclose(tfile); /* oops, it's there; close tfile & try again */ - } -} - -#else /* ! NO_MKTEMP */ - -/* Note that mktemp() requires the initial filename to end in six X's */ -#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ -#define TEMP_FILE_NAME "%sJPG%dXXXXXX" -#endif - -LOCAL(void) -select_file_name (char * fname) -{ - next_file_num++; /* advance counter */ - sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); - mktemp(fname); /* make sure file name is unique */ - /* mktemp replaces the trailing XXXXXX with a unique string of characters */ -} - -#endif /* NO_MKTEMP */ - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * It's impossible to do this in a portable way; our current solution is - * to make the user tell us (with a default value set at compile time). - * If you can actually get the available space, it's a good idea to subtract - * a slop factor of 5% or so. - */ - -#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ -#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ -#endif - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return cinfo->mem->max_memory_to_use - already_allocated; -} - - -/* - * Backing store (temporary file) management. - * Backing store objects are only used when the value returned by - * jpeg_mem_available is less than the total space needed. You can dispense - * with these routines if you have plenty of virtual memory; see jmemnobs.c. - */ - - -METHODDEF(void) -read_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFREAD(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_READ); -} - - -METHODDEF(void) -write_backing_store (j_common_ptr cinfo, backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count) -{ - if (fseek(info->temp_file, file_offset, SEEK_SET)) - ERREXIT(cinfo, JERR_TFILE_SEEK); - if (JFWRITE(info->temp_file, buffer_address, byte_count) - != (size_t) byte_count) - ERREXIT(cinfo, JERR_TFILE_WRITE); -} - - -METHODDEF(void) -close_backing_store (j_common_ptr cinfo, backing_store_ptr info) -{ - fclose(info->temp_file); /* close the file */ - unlink(info->temp_name); /* delete the file */ -/* If your system doesn't have unlink(), use remove() instead. - * remove() is the ANSI-standard name for this function, but if - * your system was ANSI you'd be using jmemansi.c, right? - */ - TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); -} - - -/* - * Initial opening of a backing-store object. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - select_file_name(info->temp_name); - if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL) - ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); - info->read_backing_store = read_backing_store; - info->write_backing_store = write_backing_store; - info->close_backing_store = close_backing_store; - TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - next_file_num = 0; /* initialize temp file name generator */ - return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/libjpegtwrp/jmemnobs.c b/libjpegtwrp/jmemnobs.c deleted file mode 100644 index eb8c33772..000000000 --- a/libjpegtwrp/jmemnobs.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * jmemnobs.c - * - * Copyright (C) 1992-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides a really simple implementation of the system- - * dependent portion of the JPEG memory manager. This implementation - * assumes that no backing-store files are needed: all required space - * can be obtained from malloc(). - * This is very portable in the sense that it'll compile on almost anything, - * but you'd better have lots of main memory (or virtual memory) if you want - * to process big images. - * Note that the max_memory_to_use option is ignored by this implementation. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" -#include "jmemsys.h" /* import the system-dependent declarations */ - -#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ -extern void * malloc JPP((size_t size)); -extern void free JPP((void *ptr)); -#endif - - -/* - * Memory allocation and freeing are controlled by the regular library - * routines malloc() and free(). - */ - -GLOBAL(void *) -jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * "Large" objects are treated the same as "small" ones. - * NB: although we include FAR keywords in the routine declarations, - * this file won't actually work in 80x86 small/medium model; at least, - * you probably won't be able to process useful-size images in only 64KB. - */ - -GLOBAL(void FAR *) -jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) -{ - return (void FAR *) malloc(sizeofobject); -} - -GLOBAL(void) -jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) -{ - free(object); -} - - -/* - * This routine computes the total memory space available for allocation. - * Here we always say, "we got all you want bud!" - */ - -GLOBAL(long) -jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, - long max_bytes_needed, long already_allocated) -{ - return max_bytes_needed; -} - - -/* - * Backing store (temporary file) management. - * Since jpeg_mem_available always promised the moon, - * this should never be called and we can just error out. - */ - -GLOBAL(void) -jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, - long total_bytes_needed) -{ - ERREXIT(cinfo, JERR_NO_BACKING_STORE); -} - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. Here, there isn't any. - */ - -GLOBAL(long) -jpeg_mem_init (j_common_ptr cinfo) -{ - return 0; /* just set max_memory_to_use to 0 */ -} - -GLOBAL(void) -jpeg_mem_term (j_common_ptr cinfo) -{ - /* no work */ -} diff --git a/libjpegtwrp/jmemsys.h b/libjpegtwrp/jmemsys.h deleted file mode 100644 index 2ed1c63a1..000000000 --- a/libjpegtwrp/jmemsys.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * jmemsys.h - * - * Copyright (C) 1992-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This include file defines the interface between the system-independent - * and system-dependent portions of the JPEG memory manager. No other - * modules need include it. (The system-independent portion is jmemmgr.c; - * there are several different versions of the system-dependent portion.) - * - * This file works as-is for the system-dependent memory managers supplied - * in the IJG distribution. You may need to modify it if you write a - * custom memory manager. If system-dependent changes are needed in - * this file, the best method is to #ifdef them based on a configuration - * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR - * and USE_MAC_MEMMGR. - */ - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_get_small jGetSmall -#define jpeg_free_small jFreeSmall -#define jpeg_get_large jGetLarge -#define jpeg_free_large jFreeLarge -#define jpeg_mem_available jMemAvail -#define jpeg_open_backing_store jOpenBackStore -#define jpeg_mem_init jMemInit -#define jpeg_mem_term jMemTerm -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * These two functions are used to allocate and release small chunks of - * memory. (Typically the total amount requested through jpeg_get_small is - * no more than 20K or so; this will be requested in chunks of a few K each.) - * Behavior should be the same as for the standard library functions malloc - * and free; in particular, jpeg_get_small must return NULL on failure. - * On most systems, these ARE malloc and free. jpeg_free_small is passed the - * size of the object being freed, just in case it's needed. - * On an 80x86 machine using small-data memory model, these manage near heap. - */ - -EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); -EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object, - size_t sizeofobject)); - -/* - * These two functions are used to allocate and release large chunks of - * memory (up to the total free space designated by jpeg_mem_available). - * The interface is the same as above, except that on an 80x86 machine, - * far pointers are used. On most other machines these are identical to - * the jpeg_get/free_small routines; but we keep them separate anyway, - * in case a different allocation strategy is desirable for large chunks. - */ - -EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo, - size_t sizeofobject)); -EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, - size_t sizeofobject)); - -/* - * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may - * be requested in a single call to jpeg_get_large (and jpeg_get_small for that - * matter, but that case should never come into play). This macro is needed - * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. - * On those machines, we expect that jconfig.h will provide a proper value. - * On machines with 32-bit flat address spaces, any large constant may be used. - * - * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type - * size_t and will be a multiple of sizeof(align_type). - */ - -#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ -#define MAX_ALLOC_CHUNK 1000000000L -#endif - -/* - * This routine computes the total space still available for allocation by - * jpeg_get_large. If more space than this is needed, backing store will be - * used. NOTE: any memory already allocated must not be counted. - * - * There is a minimum space requirement, corresponding to the minimum - * feasible buffer sizes; jmemmgr.c will request that much space even if - * jpeg_mem_available returns zero. The maximum space needed, enough to hold - * all working storage in memory, is also passed in case it is useful. - * Finally, the total space already allocated is passed. If no better - * method is available, cinfo->mem->max_memory_to_use - already_allocated - * is often a suitable calculation. - * - * It is OK for jpeg_mem_available to underestimate the space available - * (that'll just lead to more backing-store access than is really necessary). - * However, an overestimate will lead to failure. Hence it's wise to subtract - * a slop factor from the true available space. 5% should be enough. - * - * On machines with lots of virtual memory, any large constant may be returned. - * Conversely, zero may be returned to always use the minimum amount of memory. - */ - -EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo, - long min_bytes_needed, - long max_bytes_needed, - long already_allocated)); - - -/* - * This structure holds whatever state is needed to access a single - * backing-store object. The read/write/close method pointers are called - * by jmemmgr.c to manipulate the backing-store object; all other fields - * are private to the system-dependent backing store routines. - */ - -#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ - - -#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ - -typedef unsigned short XMSH; /* type of extended-memory handles */ -typedef unsigned short EMSH; /* type of expanded-memory handles */ - -typedef union { - short file_handle; /* DOS file handle if it's a temp file */ - XMSH xms_handle; /* handle if it's a chunk of XMS */ - EMSH ems_handle; /* handle if it's a chunk of EMS */ -} handle_union; - -#endif /* USE_MSDOS_MEMMGR */ - -#ifdef USE_MAC_MEMMGR /* Mac-specific junk */ -#include -#endif /* USE_MAC_MEMMGR */ - - -typedef struct backing_store_struct * backing_store_ptr; - -typedef struct backing_store_struct { - /* Methods for reading/writing/closing this backing-store object */ - JMETHOD(void, read_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, write_backing_store, (j_common_ptr cinfo, - backing_store_ptr info, - void FAR * buffer_address, - long file_offset, long byte_count)); - JMETHOD(void, close_backing_store, (j_common_ptr cinfo, - backing_store_ptr info)); - - /* Private fields for system-dependent backing-store management */ -#ifdef USE_MSDOS_MEMMGR - /* For the MS-DOS manager (jmemdos.c), we need: */ - handle_union handle; /* reference to backing-store storage object */ - char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ -#else -#ifdef USE_MAC_MEMMGR - /* For the Mac manager (jmemmac.c), we need: */ - short temp_file; /* file reference number to temp file */ - FSSpec tempSpec; /* the FSSpec for the temp file */ - char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ -#else -#ifdef USE_ANDROID_ASHMEM - short temp_file; /* file reference number to temp file */ - unsigned char* addr; /* the memory address mapped to ashmem */ - long size; /* the requested ashmem size */ -#else - /* For a typical implementation with temp files, we need: */ - FILE * temp_file; /* stdio reference to temp file */ - char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ -#endif -#endif -#endif -} backing_store_info; - - -/* - * Initial opening of a backing-store object. This must fill in the - * read/write/close pointers in the object. The read/write routines - * may take an error exit if the specified maximum file size is exceeded. - * (If jpeg_mem_available always returns a large value, this routine can - * just take an error exit.) - */ - -EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo, - backing_store_ptr info, - long total_bytes_needed)); - - -/* - * These routines take care of any system-dependent initialization and - * cleanup required. jpeg_mem_init will be called before anything is - * allocated (and, therefore, nothing in cinfo is of use except the error - * manager pointer). It should return a suitable default value for - * max_memory_to_use; this may subsequently be overridden by the surrounding - * application. (Note that max_memory_to_use is only important if - * jpeg_mem_available chooses to consult it ... no one else will.) - * jpeg_mem_term may assume that all requested memory has been freed and that - * all opened backing-store objects have been closed. - */ - -EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo)); -EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/libjpegtwrp/jmorecfg.h b/libjpegtwrp/jmorecfg.h deleted file mode 100644 index 236bbcbc9..000000000 --- a/libjpegtwrp/jmorecfg.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - * jmorecfg.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains additional configuration options that customize the - * JPEG software for special applications or support machine-dependent - * optimizations. Most users will not need to touch this file. - */ - -/* - * Define ANDROID_RGB to enable specific optimizations for Android - * JCS_RGBA_8888 support - * JCS_RGB_565 support - * - */ - -#define ANDROID_RGB - -#ifdef ANDROID_RGB -#define PACK_SHORT_565(r,g,b) ((((r)<<8)&0xf800)|(((g)<<3)&0x7E0)|((b)>>3)) -#define PACK_TWO_PIXELS(l,r) ((r<<16) | l) -#define PACK_NEED_ALIGNMENT(ptr) (((int)(ptr))&3) -#define WRITE_TWO_PIXELS(addr, pixels) do { \ - ((INT16*)(addr))[0] = (pixels); \ - ((INT16*)(addr))[1] = (pixels)>>16; \ - } while(0) -#define WRITE_TWO_ALIGNED_PIXELS(addr, pixels) ((*(INT32*)(addr)) = pixels) -#define DITHER_565_R(r, dither) ((r) + ((dither)&0xFF)) -#define DITHER_565_G(g, dither) ((g) + (((dither)&0xFF)>>1)) -#define DITHER_565_B(b, dither) ((b) + ((dither)&0xFF)) -#endif - -/* - * Define BITS_IN_JSAMPLE as either - * 8 for 8-bit sample values (the usual setting) - * 12 for 12-bit sample values - * Only 8 and 12 are legal data precisions for lossy JPEG according to the - * JPEG standard, and the IJG code does not support anything else! - * We do not support run-time selection of data precision, sorry. - */ - -#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ - - -/* - * Maximum number of components (color channels) allowed in JPEG image. - * To meet the letter of the JPEG spec, set this to 255. However, darn - * few applications need more than 4 channels (maybe 5 for CMYK + alpha - * mask). We recommend 10 as a reasonable compromise; use 4 if you are - * really short on memory. (Each allowed component costs a hundred or so - * bytes of storage, whether actually used in an image or not.) - */ - -#define MAX_COMPONENTS 10 /* maximum number of image components */ - - -/* - * Basic data types. - * You may need to change these if you have a machine with unusual data - * type sizes; for example, "char" not 8 bits, "short" not 16 bits, - * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, - * but it had better be at least 16. - */ - -/* Representation of a single sample (pixel element value). - * We frequently allocate large arrays of these, so it's important to keep - * them small. But if you have memory to burn and access to char or short - * arrays is very slow on your hardware, you might want to change these. - */ - -#if BITS_IN_JSAMPLE == 8 -/* JSAMPLE should be the smallest type that will hold the values 0..255. - * You can use a signed char by having GETJSAMPLE mask it with 0xFF. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JSAMPLE; -#ifdef CHAR_IS_UNSIGNED -#define GETJSAMPLE(value) ((int) (value)) -#else -#define GETJSAMPLE(value) ((int) (value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - -#define MAXJSAMPLE 255 -#define CENTERJSAMPLE 128 - -#endif /* BITS_IN_JSAMPLE == 8 */ - - -#if BITS_IN_JSAMPLE == 12 -/* JSAMPLE should be the smallest type that will hold the values 0..4095. - * On nearly all machines "short" will do nicely. - */ - -typedef short JSAMPLE; -#define GETJSAMPLE(value) ((int) (value)) - -#define MAXJSAMPLE 4095 -#define CENTERJSAMPLE 2048 - -#endif /* BITS_IN_JSAMPLE == 12 */ - - -/* Representation of a DCT frequency coefficient. - * This should be a signed value of at least 16 bits; "short" is usually OK. - * Again, we allocate large arrays of these, but you can change to int - * if you have memory to burn and "short" is really slow. - */ - -typedef short JCOEF; - - -/* Compressed datastreams are represented as arrays of JOCTET. - * These must be EXACTLY 8 bits wide, at least once they are written to - * external storage. Note that when using the stdio data source/destination - * managers, this is also the data type passed to fread/fwrite. - */ - -#ifdef HAVE_UNSIGNED_CHAR - -typedef unsigned char JOCTET; -#define GETJOCTET(value) (value) - -#else /* not HAVE_UNSIGNED_CHAR */ - -typedef char JOCTET; -#ifdef CHAR_IS_UNSIGNED -#define GETJOCTET(value) (value) -#else -#define GETJOCTET(value) ((value) & 0xFF) -#endif /* CHAR_IS_UNSIGNED */ - -#endif /* HAVE_UNSIGNED_CHAR */ - - -/* These typedefs are used for various table entries and so forth. - * They must be at least as wide as specified; but making them too big - * won't cost a huge amount of memory, so we don't provide special - * extraction code like we did for JSAMPLE. (In other words, these - * typedefs live at a different point on the speed/space tradeoff curve.) - */ - -/* UINT8 must hold at least the values 0..255. */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char UINT8; -#else /* not HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char UINT8; -#else /* not CHAR_IS_UNSIGNED */ -typedef short UINT8; -#endif /* CHAR_IS_UNSIGNED */ -#endif /* HAVE_UNSIGNED_CHAR */ - -/* UINT16 must hold at least the values 0..65535. */ - -#ifdef HAVE_UNSIGNED_SHORT -typedef unsigned short UINT16; -#else /* not HAVE_UNSIGNED_SHORT */ -typedef unsigned int UINT16; -#endif /* HAVE_UNSIGNED_SHORT */ - -/* INT16 must hold at least the values -32768..32767. */ - -#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ -typedef short INT16; -#endif - -/* INT32 must hold at least signed 32-bit values. */ - -#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ -typedef long INT32; -#endif - -/* Datatype used for image dimensions. The JPEG standard only supports - * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore - * "unsigned int" is sufficient on all machines. However, if you need to - * handle larger images and you don't mind deviating from the spec, you - * can change this datatype. - */ - -typedef unsigned int JDIMENSION; - -#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ - - -/* These macros are used in all function definitions and extern declarations. - * You could modify them if you need to change function linkage conventions; - * in particular, you'll need to do that to make the library a Windows DLL. - * Another application is to make all functions global for use with debuggers - * or code profilers that require it. - */ - -/* a function called through method pointers: */ -#define METHODDEF(type) static type -/* a function used only in its module: */ -#define LOCAL(type) static type -/* a function referenced thru EXTERNs: */ -#define GLOBAL(type) type -/* a reference to a GLOBAL function: */ -#define EXTERN(type) extern type - - -/* This macro is used to declare a "method", that is, a function pointer. - * We want to supply prototype parameters if the compiler can cope. - * Note that the arglist parameter must be parenthesized! - * Again, you can customize this if you need special linkage keywords. - */ - -#ifdef HAVE_PROTOTYPES -#define JMETHOD(type,methodname,arglist) type (*methodname) arglist -#else -#define JMETHOD(type,methodname,arglist) type (*methodname) () -#endif - - -/* Here is the pseudo-keyword for declaring pointers that must be "far" - * on 80x86 machines. Most of the specialized coding for 80x86 is handled - * by just saying "FAR *" where such a pointer is needed. In a few places - * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. - */ - -#ifdef NEED_FAR_POINTERS -#define FAR far -#else -#define FAR -#endif - - -/* - * On a few systems, type boolean and/or its values FALSE, TRUE may appear - * in standard header files. Or you may have conflicts with application- - * specific header files that you want to include together with these files. - * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. - */ - -#ifndef HAVE_BOOLEAN -typedef int boolean; -#endif -#ifndef FALSE /* in case these macros already exist */ -#define FALSE 0 /* values of boolean */ -#endif -#ifndef TRUE -#define TRUE 1 -#endif - - -/* - * The remaining options affect code selection within the JPEG library, - * but they don't need to be visible to most applications using the library. - * To minimize application namespace pollution, the symbols won't be - * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. - */ - -#ifdef JPEG_INTERNALS -#define JPEG_INTERNAL_OPTIONS -#endif - -#ifdef JPEG_INTERNAL_OPTIONS - - -/* - * These defines indicate whether to include various optional functions. - * Undefining some of these symbols will produce a smaller but less capable - * library. Note that you can leave certain source files out of the - * compilation/linking process if you've #undef'd the corresponding symbols. - * (You may HAVE to do that if your compiler doesn't like null source files.) - */ - -/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */ - -/* Capability options common to encoder and decoder: */ - -#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ -#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ -#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ - -/* Encoder capability options: */ - -#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ -/* Note: if you selected 12-bit data precision, it is dangerous to turn off - * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit - * precision, so jchuff.c normally uses entropy optimization to compute - * usable tables for higher precision. If you don't want to do optimization, - * you'll have to supply different default Huffman tables. - * The exact same statements apply for progressive JPEG: the default tables - * don't work for progressive mode. (This may get fixed, however.) - */ -#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ - -/* Decoder capability options: */ - -#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ -#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ -#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ -#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ -#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ -#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ -#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ -#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ -#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ -#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ - -/* more capability options later, no doubt */ - - -/* - * Ordering of RGB data in scanlines passed to or from the application. - * If your application wants to deal with data in the order B,G,R, just - * change these macros. You can also deal with formats such as R,G,B,X - * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing - * the offsets will also change the order in which colormap data is organized. - * RESTRICTIONS: - * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. - * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not - * useful if you are using JPEG color spaces other than YCbCr or grayscale. - * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE - * is not 3 (they don't understand about dummy color components!). So you - * can't use color quantization if you change that value. - */ - -#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ -#define RGB_GREEN 1 /* Offset of Green */ -#define RGB_BLUE 2 /* Offset of Blue */ -#ifdef ANDROID_RGB -#define RGB_ALPHA 3 /* Offset of Alpha */ -#endif -#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ - -/* Definitions for speed-related optimizations. */ - - -/* If your compiler supports inline functions, define INLINE - * as the inline keyword; otherwise define it as empty. - */ - -#ifndef INLINE -#ifdef __GNUC__ /* for instance, GNU C knows about inline */ -#define INLINE __inline__ -#endif -#ifndef INLINE -#define INLINE /* default is to define it as empty */ -#endif -#endif - - -/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying - * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER - * as short on such a machine. MULTIPLIER must be at least 16 bits wide. - */ - -#ifndef MULTIPLIER -#define MULTIPLIER int /* type for fastest integer multiply */ -#endif - - -/* FAST_FLOAT should be either float or double, whichever is done faster - * by your compiler. (Note that this type is only used in the floating point - * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) - * Typically, float is faster in ANSI C compilers, while double is faster in - * pre-ANSI compilers (because they insist on converting to double anyway). - * The code below therefore chooses float if we have ANSI-style prototypes. - */ - -#ifndef FAST_FLOAT -#ifdef HAVE_PROTOTYPES -#define FAST_FLOAT float -#else -#define FAST_FLOAT double -#endif -#endif - -#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/libjpegtwrp/jpegint.h b/libjpegtwrp/jpegint.h deleted file mode 100644 index 7bf9ffe95..000000000 --- a/libjpegtwrp/jpegint.h +++ /dev/null @@ -1,475 +0,0 @@ -/* - * jpegint.h - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file provides common declarations for the various JPEG modules. - * These declarations are considered internal to the JPEG library; most - * applications using the library shouldn't need to include this file. - */ - - -/* Declarations for both compression & decompression */ - -typedef enum { /* Operating modes for buffer controllers */ - JBUF_PASS_THRU, /* Plain stripwise operation */ - /* Remaining modes require a full-image buffer to have been created */ - JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ - JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ - JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ -} J_BUF_MODE; - -/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ -#define CSTATE_START 100 /* after create_compress */ -#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ -#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ -#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ -#define DSTATE_START 200 /* after create_decompress */ -#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ -#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ -#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ -#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ -#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ -#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ -#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ -#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ -#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ -#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ - - -/* Declarations for compression modules */ - -/* Master control module */ -struct jpeg_comp_master { - JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); - JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean call_pass_startup; /* True if pass_startup must be called */ - boolean is_last_pass; /* True during last pass */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_c_main_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail)); -}; - -/* Compression preprocessing (downsampling input buffer control) */ -struct jpeg_c_prep_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, - JDIMENSION *in_row_ctr, - JDIMENSION in_rows_avail, - JSAMPIMAGE output_buf, - JDIMENSION *out_row_group_ctr, - JDIMENSION out_row_groups_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_c_coef_controller { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf)); -}; - -/* Colorspace conversion */ -struct jpeg_color_converter { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, color_convert, (j_compress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPIMAGE output_buf, - JDIMENSION output_row, int num_rows)); -}; - -/* Downsampling */ -struct jpeg_downsampler { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - JMETHOD(void, downsample, (j_compress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION in_row_index, - JSAMPIMAGE output_buf, - JDIMENSION out_row_group_index)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Forward DCT (also controls coefficient quantization) */ -struct jpeg_forward_dct { - JMETHOD(void, start_pass, (j_compress_ptr cinfo)); - /* perhaps this should be an array??? */ - JMETHOD(void, forward_DCT, (j_compress_ptr cinfo, - jpeg_component_info * compptr, - JSAMPARRAY sample_data, JBLOCKROW coef_blocks, - JDIMENSION start_row, JDIMENSION start_col, - JDIMENSION num_blocks)); -}; - -/* Entropy encoding */ -struct jpeg_entropy_encoder { - JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); - JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); - JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); -}; - -/* Marker writing */ -struct jpeg_marker_writer { - JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); - JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); - JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); - /* These routines are exported to allow insertion of extra markers */ - /* Probably only COM and APPn markers should be written this way */ - JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, - unsigned int datalen)); - JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); -}; - - -/* Declarations for decompression modules */ - -/* Master control module */ -struct jpeg_decomp_master { - JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ -}; - -/* Input control module */ -struct jpeg_input_controller { - JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); - JMETHOD(int, consume_input_build_huffman_index, (j_decompress_ptr cinfo, - huffman_index *index, int scan_count)); - JMETHOD(int, consume_markers, (j_decompress_ptr cinfo, - huffman_index *index, int scan_count)); - JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); - - /* State variables made visible to other modules */ - boolean has_multiple_scans; /* True if file has multiple scans */ - boolean eoi_reached; /* True when EOI has been consumed */ -}; - -/* Main buffer control (downsampled-data buffer) */ -struct jpeg_d_main_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, process_data, (j_decompress_ptr cinfo, - JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Coefficient buffer control */ -struct jpeg_d_coef_controller { - JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); - JMETHOD(int, consume_data_build_huffman_index, (j_decompress_ptr cinfo, - huffman_index* index, int scan_count)); - JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); - JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, - JSAMPIMAGE output_buf)); - /* Pointer to array of coefficient virtual arrays, or NULL if none */ - jvirt_barray_ptr *coef_arrays; - - /* column number of the first and last tile, respectively */ - int column_left_boundary; - int column_right_boundary; - - /* column number of the first and last MCU, respectively */ - int MCU_column_left_boundary; - int MCU_column_right_boundary; - - /* the number of MCU columns to skip from the indexed MCU, iM, - * to the requested MCU boundary, rM, where iM is the MCU that we sample - * into our index and is the nearest one to the left of rM. - */ - int MCU_columns_to_skip; -}; - -/* Decompression postprocessing (color quantization buffer control) */ -struct jpeg_d_post_controller { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); - JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); -}; - -/* Marker reading & parsing */ -struct jpeg_marker_reader { - JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); - /* Read markers until SOS or EOI. - * Returns same codes as are defined for jpeg_consume_input: - * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. - */ - JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); - JMETHOD(void, get_sos_marker_position, (j_decompress_ptr cinfo, - huffman_index *index)); - /* Read a restart marker --- exported for use by entropy decoder only */ - jpeg_marker_parser_method read_restart_marker; - - /* State of marker reader --- nominally internal, but applications - * supplying COM or APPn handlers might like to know the state. - */ - boolean saw_SOI; /* found SOI? */ - boolean saw_SOF; /* found SOF? */ - int next_restart_num; /* next restart number expected (0-7) */ - int current_sos_marker_position; - unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ -}; - -/* Entropy decoding */ -struct jpeg_entropy_decoder { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, - JBLOCKROW *MCU_data)); - JMETHOD(boolean, decode_mcu_discard_coef, (j_decompress_ptr cinfo)); - JMETHOD(void, configure_huffman_decoder, (j_decompress_ptr cinfo, - huffman_offset_data offset)); - JMETHOD(void, get_huffman_decoder_configuration, (j_decompress_ptr cinfo, - huffman_offset_data *offset)); - - /* This is here to share code between baseline and progressive decoders; */ - /* other modules probably should not use it */ - boolean insufficient_data; /* set TRUE after emitting warning */ - - huffman_index *index; -}; - -/* Inverse DCT (also performs dequantization) */ -typedef JMETHOD(void, inverse_DCT_method_ptr, - (j_decompress_ptr cinfo, jpeg_component_info * compptr, - JCOEFPTR coef_block, - JSAMPARRAY output_buf, JDIMENSION output_col)); - -struct jpeg_inverse_dct { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - /* It is useful to allow each component to have a separate IDCT method. */ - inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; -}; - -/* Upsampling (note that upsampler must also call color converter) */ -struct jpeg_upsampler { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, upsample, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, - JDIMENSION *in_row_group_ctr, - JDIMENSION in_row_groups_avail, - JSAMPARRAY output_buf, - JDIMENSION *out_row_ctr, - JDIMENSION out_rows_avail)); - - boolean need_context_rows; /* TRUE if need rows above & below */ -}; - -/* Colorspace conversion */ -struct jpeg_color_deconverter { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, color_convert, (j_decompress_ptr cinfo, - JSAMPIMAGE input_buf, JDIMENSION input_row, - JSAMPARRAY output_buf, int num_rows)); -}; - -/* Color quantization or color precision reduction */ -struct jpeg_color_quantizer { - JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); - JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, - int num_rows)); - JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); - JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); -}; - -#ifdef ANDROID_JPEG_USE_VENUM - -/* IDCT routines */ -EXTERN (void) idct_1x1_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride); -EXTERN (void) idct_2x2_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride); -EXTERN (void) idct_4x4_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride); -EXTERN (void) idct_8x8_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride); - -#ifndef ANDROID_JPEG_DISABLE_VENUM_YCC_RGB_565 -/* Color conversion routines */ -EXTERN (void) yvup2rgb565_venum (UINT8 *pLumaLine, - UINT8 *pCrLine, - UINT8 *pCbLine, - UINT8 *pRGB565Line, - JDIMENSION nLineWidth); -EXTERN (void) yyvup2rgb565_venum (UINT8 * pLumaLine, - UINT8 *pCrLine, - UINT8 *pCbLine, - UINT8 * pRGB565Line, - JDIMENSION nLineWidth); -#endif -EXTERN (void) yvup2bgr888_venum (UINT8 * pLumaLine, - UINT8 *pCrLine, - UINT8 *pCbLine, - UINT8 * pBGR888Line, - JDIMENSION nLineWidth); -EXTERN (void) yyvup2bgr888_venum (UINT8 * pLumaLine, - UINT8 *pCrLine, - UINT8 *pCbLine, - UINT8 * pBGR888Line, - JDIMENSION nLineWidth); -EXTERN (void) yvup2abgr8888_venum (UINT8 * pLumaLine, - UINT8 *pCrLine, - UINT8 *pCbLine, - UINT8 * pABGR888Line, - JDIMENSION nLineWidth); -EXTERN (void) yyvup2abgr8888_venum (UINT8 * pLumaLine, - UINT8 *pCrLine, - UINT8 *pCbLine, - UINT8 * pABGR888Line, - JDIMENSION nLineWidth); -#endif - -/* Miscellaneous useful macros */ - -#undef MAX -#define MAX(a,b) ((a) > (b) ? (a) : (b)) -#undef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) - - -/* We assume that right shift corresponds to signed division by 2 with - * rounding towards minus infinity. This is correct for typical "arithmetic - * shift" instructions that shift in copies of the sign bit. But some - * C compilers implement >> with an unsigned shift. For these machines you - * must define RIGHT_SHIFT_IS_UNSIGNED. - * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. - * It is only applied with constant shift counts. SHIFT_TEMPS must be - * included in the variables of any routine using RIGHT_SHIFT. - */ - -#ifdef RIGHT_SHIFT_IS_UNSIGNED -#define SHIFT_TEMPS INT32 shift_temp; -#define RIGHT_SHIFT(x,shft) \ - ((shift_temp = (x)) < 0 ? \ - (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ - (shift_temp >> (shft))) -#else -#define SHIFT_TEMPS -#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jinit_compress_master jICompress -#define jinit_c_master_control jICMaster -#define jinit_c_main_controller jICMainC -#define jinit_c_prep_controller jICPrepC -#define jinit_c_coef_controller jICCoefC -#define jinit_color_converter jICColor -#define jinit_downsampler jIDownsampler -#define jinit_forward_dct jIFDCT -#define jinit_huff_encoder jIHEncoder -#define jinit_phuff_encoder jIPHEncoder -#define jinit_marker_writer jIMWriter -#define jinit_master_decompress jIDMaster -#define jinit_d_main_controller jIDMainC -#define jinit_d_coef_controller jIDCoefC -#define jinit_d_post_controller jIDPostC -#define jinit_input_controller jIInCtlr -#define jinit_marker_reader jIMReader -#define jinit_huff_decoder jIHDecoder -#define jinit_phuff_decoder jIPHDecoder -#define jinit_inverse_dct jIIDCT -#define jinit_upsampler jIUpsampler -#define jinit_color_deconverter jIDColor -#define jinit_1pass_quantizer jI1Quant -#define jinit_2pass_quantizer jI2Quant -#define jinit_merged_upsampler jIMUpsampler -#define jinit_memory_mgr jIMemMgr -#define jdiv_round_up jDivRound -#define jround_up jRound -#define jcopy_sample_rows jCopySamples -#define jcopy_block_row jCopyBlocks -#define jzero_far jZeroFar -#define jpeg_zigzag_order jZIGTable -#define jpeg_natural_order jZAGTable -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Compression module initialization routines */ -EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, - boolean transcode_only)); -EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo)); -EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); -/* Decompression module initialization routines */ -EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, - boolean need_full_buffer)); -EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_huff_decoder_no_data JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); -EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_decompress_per_scan_setup (j_decompress_ptr cinfo); -/* Memory manager initialization */ -EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); - -/* Utility routines in jutils.c */ -EXTERN(long) jdiv_round_up JPP((long a, long b)); -EXTERN(long) jround_up JPP((long a, long b)); -EXTERN(long) jmin JPP((long a, long b)); -EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols)); -EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks)); -EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); - -EXTERN(void) jset_input_stream_position JPP((j_decompress_ptr cinfo, - int offset)); -EXTERN(void) jset_input_stream_position_bit JPP((j_decompress_ptr cinfo, - int byte_offset, int bit_left, INT32 buf)); - -EXTERN(int) jget_input_stream_position JPP((j_decompress_ptr cinfo)); -/* Constant tables in jutils.c */ -#if 0 /* This table is not actually needed in v6a */ -extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ -#endif -extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ - -/* Suppress undefined-structure complaints if necessary. */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -#endif -#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/libjpegtwrp/jpeglib.h b/libjpegtwrp/jpeglib.h deleted file mode 100644 index 07e687294..000000000 --- a/libjpegtwrp/jpeglib.h +++ /dev/null @@ -1,1184 +0,0 @@ -/* - * jpeglib.h - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the application interface for the JPEG library. - * Most applications using the library need only include this file, - * and perhaps jerror.h if they want to know the exact error codes. - */ - -#ifndef JPEGLIB_H -#define JPEGLIB_H - -/* - * First we include the configuration files that record how this - * installation of the JPEG library is set up. jconfig.h can be - * generated automatically for many systems. jmorecfg.h contains - * manual configuration options that most people need not worry about. - */ - -#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ -#include "jconfig.h" /* widely used configuration options */ -#endif -#include "jmorecfg.h" /* seldom changed options */ - - -/* Version ID for the JPEG library. - * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". - */ - -#define JPEG_LIB_VERSION 62 /* Version 6b */ - - -/* Various constants determining the sizes of things. - * All of these are specified by the JPEG standard, so don't change them - * if you want to be compatible. - */ - -#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ -#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ -#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ -#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ -#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ -#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ -#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ -/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; - * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. - * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU - * to handle it. We even let you do this from the jconfig.h file. However, - * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe - * sometimes emits noncompliant files doesn't mean you should too. - */ -#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ -#ifndef D_MAX_BLOCKS_IN_MCU -#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ -#endif - - -/* Data structures for images (arrays of samples and of DCT coefficients). - * On 80x86 machines, the image arrays are too big for near pointers, - * but the pointer arrays can fit in near memory. - */ - -typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ -typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ -typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ - -typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ -typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ -typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ -typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ - -typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ - - -/* Types for JPEG compression parameters and working tables. */ - - -/* DCT coefficient quantization tables. */ - -typedef struct { - /* This array gives the coefficient quantizers in natural array order - * (not the zigzag order in which they are stored in a JPEG DQT marker). - * CAUTION: IJG versions prior to v6a kept this array in zigzag order. - */ - UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JQUANT_TBL; - - -/* Huffman coding tables. */ - -typedef struct { - /* These two fields directly represent the contents of a JPEG DHT marker */ - UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ - /* length k bits; bits[0] is unused */ - UINT8 huffval[256]; /* The symbols, in order of incr code length */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JHUFF_TBL; - - -/* Basic info about one component (color channel). */ - -typedef struct { - /* These values are fixed over the whole image. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOF marker. */ - int component_id; /* identifier for this component (0..255) */ - int component_index; /* its index in SOF or cinfo->comp_info[] */ - int h_samp_factor; /* horizontal sampling factor (1..4) */ - int v_samp_factor; /* vertical sampling factor (1..4) */ - int quant_tbl_no; /* quantization table selector (0..3) */ - /* These values may vary between scans. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOS marker. */ - /* The decompressor output side may not use these variables. */ - int dc_tbl_no; /* DC entropy table selector (0..3) */ - int ac_tbl_no; /* AC entropy table selector (0..3) */ - - /* Remaining fields should be treated as private by applications. */ - - /* These values are computed during compression or decompression startup: */ - /* Component's size in DCT blocks. - * Any dummy blocks added to complete an MCU are not counted; therefore - * these values do not depend on whether a scan is interleaved or not. - */ - JDIMENSION width_in_blocks; - JDIMENSION height_in_blocks; - /* Size of a DCT block in samples. Always DCTSIZE for compression. - * For decompression this is the size of the output from one DCT block, - * reflecting any scaling we choose to apply during the IDCT step. - * Values of 1,2,4,8 are likely to be supported. Note that different - * components may receive different IDCT scalings. - */ - int DCT_scaled_size; - /* The downsampled dimensions are the component's actual, unpadded number - * of samples at the main buffer (preprocessing/compression interface), thus - * downsampled_width = ceil(image_width * Hi/Hmax) - * and similarly for height. For decompression, IDCT scaling is included, so - * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) - */ - JDIMENSION downsampled_width; /* actual width in samples */ - JDIMENSION downsampled_height; /* actual height in samples */ - /* This flag is used only for decompression. In cases where some of the - * components will be ignored (eg grayscale output from YCbCr image), - * we can skip most computations for the unused components. - */ - boolean component_needed; /* do we need the value of this component? */ - - /* These values are computed before starting a scan of the component. */ - /* The decompressor output side may not use these variables. */ - int MCU_width; /* number of blocks per MCU, horizontally */ - int MCU_height; /* number of blocks per MCU, vertically */ - int MCU_blocks; /* MCU_width * MCU_height */ - int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ - int last_col_width; /* # of non-dummy blocks across in last MCU */ - int last_row_height; /* # of non-dummy blocks down in last MCU */ - - /* Saved quantization table for component; NULL if none yet saved. - * See jdinput.c comments about the need for this information. - * This field is currently used only for decompression. - */ - JQUANT_TBL * quant_table; - - /* Private per-component storage for DCT or IDCT subsystem. */ - void * dct_table; -} jpeg_component_info; - - -/* The script for encoding a multiple-scan file is an array of these: */ - -typedef struct { - int comps_in_scan; /* number of components encoded in this scan */ - int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ - int Ss, Se; /* progressive JPEG spectral selection parms */ - int Ah, Al; /* progressive JPEG successive approx. parms */ -} jpeg_scan_info; - -/* The decompressor can save APPn and COM markers in a list of these: */ - -typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; - -struct jpeg_marker_struct { - jpeg_saved_marker_ptr next; /* next in list, or NULL */ - UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ - unsigned int original_length; /* # bytes of data in the file */ - unsigned int data_length; /* # bytes of data saved at data[] */ - JOCTET FAR * data; /* the data contained in the marker */ - /* the marker length word is not counted in data_length or original_length */ -}; - -/* Known color spaces. */ - -typedef enum { - JCS_UNKNOWN, /* error/unspecified */ - JCS_GRAYSCALE, /* monochrome */ - JCS_RGB, /* red/green/blue */ - JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ - JCS_CMYK, /* C/M/Y/K */ - JCS_YCCK, /* Y/Cb/Cr/K */ -#ifdef ANDROID_RGB - JCS_RGBA_8888, /* red/green/blue/alpha */ - JCS_RGB_565 /* red/green/blue in 565 format */ -#endif -} J_COLOR_SPACE; - -/* DCT/IDCT algorithm options. */ - -typedef enum { - JDCT_ISLOW, /* slow but accurate integer algorithm */ - JDCT_IFAST, /* faster, less accurate integer method */ - JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ -} J_DCT_METHOD; - -#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ -#define JDCT_DEFAULT JDCT_ISLOW -#endif -#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ -#define JDCT_FASTEST JDCT_IFAST -#endif - -/* Dithering options for decompression. */ - -typedef enum { - JDITHER_NONE, /* no dithering */ - JDITHER_ORDERED, /* simple ordered dither */ - JDITHER_FS /* Floyd-Steinberg error diffusion dither */ -} J_DITHER_MODE; - - -/* Common fields between JPEG compression and decompression master structs. */ - -#define jpeg_common_fields \ - struct jpeg_error_mgr * err; /* Error handler module */\ - struct jpeg_memory_mgr * mem; /* Memory manager module */\ - struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ - void * client_data; /* Available for use by application */\ - boolean is_decompressor; /* So common code can tell which is which */\ - int global_state /* For checking call sequence validity */ - -/* Routines that are to be used by both halves of the library are declared - * to receive a pointer to this structure. There are no actual instances of - * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. - */ -struct jpeg_common_struct { - jpeg_common_fields; /* Fields common to both master struct types */ - /* Additional fields follow in an actual jpeg_compress_struct or - * jpeg_decompress_struct. All three structs must agree on these - * initial fields! (This would be a lot cleaner in C++.) - */ -}; - -typedef struct jpeg_common_struct * j_common_ptr; -typedef struct jpeg_compress_struct * j_compress_ptr; -typedef struct jpeg_decompress_struct * j_decompress_ptr; - - -/* Master record for a compression instance */ - -struct jpeg_compress_struct { - jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ - - /* Destination for compressed data */ - struct jpeg_destination_mgr * dest; - - /* Description of source image --- these fields must be filled in by - * outer application before starting compression. in_color_space must - * be correct before you can even call jpeg_set_defaults(). - */ - - JDIMENSION image_width; /* input image width */ - JDIMENSION image_height; /* input image height */ - int input_components; /* # of color components in input image */ - J_COLOR_SPACE in_color_space; /* colorspace of input image */ - - double input_gamma; /* image gamma of input image */ - - /* Compression parameters --- these fields must be set before calling - * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to - * initialize everything to reasonable defaults, then changing anything - * the application specifically wants to change. That way you won't get - * burnt when new parameters are added. Also note that there are several - * helper routines to simplify changing parameters. - */ - - int data_precision; /* bits of precision in image data */ - - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - int num_scans; /* # of entries in scan_info array */ - const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ - /* The default value of scan_info is NULL, which causes a single-scan - * sequential JPEG file to be emitted. To create a multi-scan file, - * set num_scans and scan_info to point to an array of scan definitions. - */ - - boolean raw_data_in; /* TRUE=caller supplies downsampled data */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - int smoothing_factor; /* 1..100, or 0 for no input smoothing */ - J_DCT_METHOD dct_method; /* DCT algorithm selector */ - - /* The restart interval can be specified in absolute MCUs by setting - * restart_interval, or in MCU rows by setting restart_in_rows - * (in which case the correct restart_interval will be figured - * for each scan). - */ - unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ - int restart_in_rows; /* if > 0, MCU rows per restart interval */ - - /* Parameters controlling emission of special markers. */ - - boolean write_JFIF_header; /* should a JFIF marker be written? */ - UINT8 JFIF_major_version; /* What to write for the JFIF version number */ - UINT8 JFIF_minor_version; - /* These three values are not used by the JPEG code, merely copied */ - /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ - /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ - /* ratio is defined by X_density/Y_density even when density_unit=0. */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean write_Adobe_marker; /* should an Adobe marker be written? */ - - /* State variable: index of next scanline to be written to - * jpeg_write_scanlines(). Application may use this to control its - * processing loop, e.g., "while (next_scanline < image_height)". - */ - - JDIMENSION next_scanline; /* 0 .. image_height-1 */ - - /* Remaining fields are known throughout compressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during compression startup - */ - boolean progressive_mode; /* TRUE if scan script uses progressive mode */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ - /* The coefficient controller receives data in units of MCU rows as defined - * for fully interleaved scans (whether the JPEG file is interleaved or not). - * There are v_samp_factor * DCTSIZE sample rows of each component in an - * "iMCU" (interleaved MCU) row. - */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[C_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* - * Links to compression subobjects (methods and private variables of modules) - */ - struct jpeg_comp_master * master; - struct jpeg_c_main_controller * main; - struct jpeg_c_prep_controller * prep; - struct jpeg_c_coef_controller * coef; - struct jpeg_marker_writer * marker; - struct jpeg_color_converter * cconvert; - struct jpeg_downsampler * downsample; - struct jpeg_forward_dct * fdct; - struct jpeg_entropy_encoder * entropy; - jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ - int script_space_size; -}; - - -/* Master record for a decompression instance */ - -struct jpeg_decompress_struct { - jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ - - /* Source of compressed data */ - struct jpeg_source_mgr * src; - - /* Basic description of image --- filled in by jpeg_read_header(). */ - /* Application may inspect these values to decide how to process image. */ - - JDIMENSION original_image_width; /* nominal image width (from SOF marker) */ - - JDIMENSION image_width; /* nominal image width (from SOF marker) - may be changed by tile decode */ - JDIMENSION image_height; /* nominal image height */ - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - /* Decompression processing parameters --- these fields must be set before - * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes - * them to default values. - */ - - J_COLOR_SPACE out_color_space; /* colorspace for output */ - - unsigned int scale_num, scale_denom; /* fraction by which to scale image */ - - double output_gamma; /* image gamma wanted in output */ - - boolean buffered_image; /* TRUE=multiple output passes */ - boolean raw_data_out; /* TRUE=downsampled data wanted */ - - J_DCT_METHOD dct_method; /* IDCT algorithm selector */ - boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ - boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ - - boolean quantize_colors; /* TRUE=colormapped output wanted */ - /* the following are ignored if not quantize_colors: */ - J_DITHER_MODE dither_mode; /* type of color dithering to use */ - boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ - int desired_number_of_colors; /* max # colors to use in created colormap */ - /* these are significant only in buffered-image mode: */ - boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ - boolean enable_external_quant;/* enable future use of external colormap */ - boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ - - /* Description of actual output image that will be returned to application. - * These fields are computed by jpeg_start_decompress(). - * You can also use jpeg_calc_output_dimensions() to determine these values - * in advance of calling jpeg_start_decompress(). - */ - - JDIMENSION output_width; /* scaled image width */ - JDIMENSION output_height; /* scaled image height */ - int out_color_components; /* # of color components in out_color_space */ - int output_components; /* # of color components returned */ - /* output_components is 1 (a colormap index) when quantizing colors; - * otherwise it equals out_color_components. - */ - int rec_outbuf_height; /* min recommended height of scanline buffer */ - /* If the buffer passed to jpeg_read_scanlines() is less than this many rows - * high, space and time will be wasted due to unnecessary data copying. - * Usually rec_outbuf_height will be 1 or 2, at most 4. - */ - - /* When quantizing colors, the output colormap is described by these fields. - * The application can supply a colormap by setting colormap non-NULL before - * calling jpeg_start_decompress; otherwise a colormap is created during - * jpeg_start_decompress or jpeg_start_output. - * The map has out_color_components rows and actual_number_of_colors columns. - */ - int actual_number_of_colors; /* number of entries in use */ - JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ - - /* State variables: these variables indicate the progress of decompression. - * The application may examine these but must not modify them. - */ - - /* Row index of next scanline to be read from jpeg_read_scanlines(). - * Application may use this to control its processing loop, e.g., - * "while (output_scanline < output_height)". - */ - JDIMENSION output_scanline; /* 0 .. output_height-1 */ - - /* Current input scan number and number of iMCU rows completed in scan. - * These indicate the progress of the decompressor input side. - */ - int input_scan_number; /* Number of SOS markers seen so far */ - JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ - - /* The "output scan number" is the notional scan being displayed by the - * output side. The decompressor will not allow output scan/row number - * to get ahead of input scan/row, but it can fall arbitrarily far behind. - */ - int output_scan_number; /* Nominal scan number being displayed */ - JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ - - /* Current progression status. coef_bits[c][i] indicates the precision - * with which component c's DCT coefficient i (in zigzag order) is known. - * It is -1 when no data has yet been received, otherwise it is the point - * transform (shift) value for the most recent scan of the coefficient - * (thus, 0 at completion of the progression). - * This pointer is NULL when reading a non-progressive file. - */ - int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ - - /* Internal JPEG parameters --- the application usually need not look at - * these fields. Note that the decompressor output side may not use - * any parameters that can change between scans. - */ - - /* Quantization and Huffman tables are carried forward across input - * datastreams when processing abbreviated JPEG datastreams. - */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - /* These parameters are never carried across datastreams, since they - * are given in SOF/SOS markers or defined to be reset by SOI. - */ - - int data_precision; /* bits of precision in image data */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - boolean tile_decode; /* TRUE if using tile based decoding */ - boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ - - /* These fields record data obtained from optional markers recognized by - * the JPEG library. - */ - boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ - /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ - UINT8 JFIF_major_version; /* JFIF version number */ - UINT8 JFIF_minor_version; - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ - UINT8 Adobe_transform; /* Color transform code from Adobe marker */ - - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - - /* Aside from the specific data retained from APPn markers known to the - * library, the uninterpreted contents of any or all APPn and COM markers - * can be saved in a list for examination by the application. - */ - jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ - - /* Remaining fields are known throughout decompressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during decompression startup - */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ - /* The coefficient controller's input and output progress is measured in - * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows - * in fully interleaved JPEG scans, but are used whether the scan is - * interleaved or not. We define an iMCU row as v_samp_factor DCT block - * rows of each component. Therefore, the IDCT output contains - * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. - */ - - JSAMPLE * sample_range_limit; /* table for fast range-limiting */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - * Note that the decompressor output side must not use these fields. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[D_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* This field is shared between entropy decoder and marker parser. - * It is either zero or the code of a JPEG marker that has been - * read from the data source, but has not yet been processed. - */ - int unread_marker; - - /* - * Links to decompression subobjects (methods, private variables of modules) - */ - struct jpeg_decomp_master * master; - struct jpeg_d_main_controller * main; - struct jpeg_d_coef_controller * coef; - struct jpeg_d_post_controller * post; - struct jpeg_input_controller * inputctl; - struct jpeg_marker_reader * marker; - struct jpeg_entropy_decoder * entropy; - struct jpeg_inverse_dct * idct; - struct jpeg_upsampler * upsample; - struct jpeg_color_deconverter * cconvert; - struct jpeg_color_quantizer * cquantize; -}; - -typedef struct { - - // |--- byte_offset ---|- bit_left -| - // \------ 27 -------/ \---- 5 ----/ - unsigned int bitstream_offset; - short prev_dc[3]; - - // remaining EOBs in EOBRUN - unsigned short EOBRUN; - - // save the decoder current bit buffer, entropy->bitstate.get_buffer. - INT32 get_buffer; - - // save the restart info. - unsigned short restarts_to_go; - unsigned char next_restart_num; -} huffman_offset_data; - -typedef struct { - - // The header starting position of this scan - unsigned int bitstream_offset; - - // Number of components in this scan - int comps_in_scan; - - // Number of MCUs in each row - int MCUs_per_row; - int MCU_rows_per_iMCU_row; - - // The last MCU position and its dc value in this scan - huffman_offset_data prev_MCU_offset; - - huffman_offset_data **offset; -} huffman_scan_header; - -#define DEFAULT_MCU_SAMPLE_SIZE 16 - -typedef struct { - - // The number of MCUs that we sample each time as an index point - int MCU_sample_size; - - // Number of scan in this image - int scan_count; - - // Number of iMCUs rows in this image - int total_iMCU_rows; - - // Memory used by scan struct - size_t mem_used; - huffman_scan_header *scan; -} huffman_index; - -/* "Object" declarations for JPEG modules that may be supplied or called - * directly by the surrounding application. - * As with all objects in the JPEG library, these structs only define the - * publicly visible methods and state variables of a module. Additional - * private fields may exist after the public ones. - */ - - -/* Error handler object */ - -struct jpeg_error_mgr { - /* Error exit handler: does not return to caller */ - JMETHOD(void, error_exit, (j_common_ptr cinfo)); - /* Conditionally emit a trace or warning message */ - JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); - /* Routine that actually outputs a trace or error message */ - JMETHOD(void, output_message, (j_common_ptr cinfo)); - /* Format a message string for the most recent JPEG error or message */ - JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); -#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ - /* Reset error state variables at start of a new image */ - JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); - - /* The message ID code and any parameters are saved here. - * A message can have one string parameter or up to 8 int parameters. - */ - int msg_code; -#define JMSG_STR_PARM_MAX 80 - union { - int i[8]; - char s[JMSG_STR_PARM_MAX]; - } msg_parm; - - /* Standard state variables for error facility */ - - int trace_level; /* max msg_level that will be displayed */ - - /* For recoverable corrupt-data errors, we emit a warning message, - * but keep going unless emit_message chooses to abort. emit_message - * should count warnings in num_warnings. The surrounding application - * can check for bad data by seeing if num_warnings is nonzero at the - * end of processing. - */ - long num_warnings; /* number of corrupt-data warnings */ - - /* These fields point to the table(s) of error message strings. - * An application can change the table pointer to switch to a different - * message list (typically, to change the language in which errors are - * reported). Some applications may wish to add additional error codes - * that will be handled by the JPEG library error mechanism; the second - * table pointer is used for this purpose. - * - * First table includes all errors generated by JPEG library itself. - * Error code 0 is reserved for a "no such error string" message. - */ - const char * const * jpeg_message_table; /* Library errors */ - int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ - /* Second table can be added by application (see cjpeg/djpeg for example). - * It contains strings numbered first_addon_message..last_addon_message. - */ - const char * const * addon_message_table; /* Non-library errors */ - int first_addon_message; /* code for first string in addon table */ - int last_addon_message; /* code for last string in addon table */ -}; - - -/* Progress monitor object */ - -struct jpeg_progress_mgr { - JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); - - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -}; - - -/* Data destination object for compression */ - -struct jpeg_destination_mgr { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - - JMETHOD(void, init_destination, (j_compress_ptr cinfo)); - JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); - JMETHOD(void, term_destination, (j_compress_ptr cinfo)); -}; - - -/* Data source object for decompression */ - -struct jpeg_source_mgr { - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - const JOCTET * start_input_byte; /* => first byte to read from input */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - size_t current_offset; /* current readed input offset */ - - JMETHOD(void, init_source, (j_decompress_ptr cinfo)); - JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); - JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); - JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); - JMETHOD(void, term_source, (j_decompress_ptr cinfo)); - JMETHOD(boolean, seek_input_data, (j_decompress_ptr cinfo, long byte_offset)); -}; - - -/* Memory manager object. - * Allocates "small" objects (a few K total), "large" objects (tens of K), - * and "really big" objects (virtual arrays with backing store if needed). - * The memory manager does not allow individual objects to be freed; rather, - * each created object is assigned to a pool, and whole pools can be freed - * at once. This is faster and more convenient than remembering exactly what - * to free, especially where malloc()/free() are not too speedy. - * NB: alloc routines never return NULL. They exit to error_exit if not - * successful. - */ - -#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ -#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ -#define JPOOL_NUMPOOLS 2 - -typedef struct jvirt_sarray_control * jvirt_sarray_ptr; -typedef struct jvirt_barray_control * jvirt_barray_ptr; - - -struct jpeg_memory_mgr { - /* Method pointers */ - JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, - JDIMENSION numrows)); - JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, - JDIMENSION numrows)); - JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION samplesperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION blocksperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); - JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, - jvirt_sarray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, - jvirt_barray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); - JMETHOD(void, self_destruct, (j_common_ptr cinfo)); - - /* Limit on memory allocation for this JPEG object. (Note that this is - * merely advisory, not a guaranteed maximum; it only affects the space - * used for virtual-array buffers.) May be changed by outer application - * after creating the JPEG object. - */ - long max_memory_to_use; - - /* Maximum allocation request accepted by alloc_large. */ - long max_alloc_chunk; -}; - - -/* Routine signature for application-supplied marker processing methods. - * Need not pass marker code since it is stored in cinfo->unread_marker. - */ -typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); - - -/* Declarations for routines called by application. - * The JPP macro hides prototype parameters from compilers that can't cope. - * Note JPP requires double parentheses. - */ - -#ifdef HAVE_PROTOTYPES -#define JPP(arglist) arglist -#else -#define JPP(arglist) () -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. - * We shorten external names to be unique in the first six letters, which - * is good enough for all known systems. - * (If your compiler itself needs names to be unique in less than 15 - * characters, you are out of luck. Get a better compiler.) - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_error jStdError -#define jpeg_CreateCompress jCreaCompress -#define jpeg_CreateDecompress jCreaDecompress -#define jpeg_destroy_compress jDestCompress -#define jpeg_destroy_decompress jDestDecompress -#define jpeg_stdio_dest jStdDest -#define jpeg_stdio_src jStdSrc -#define jpeg_set_defaults jSetDefaults -#define jpeg_set_colorspace jSetColorspace -#define jpeg_default_colorspace jDefColorspace -#define jpeg_set_quality jSetQuality -#define jpeg_set_linear_quality jSetLQuality -#define jpeg_add_quant_table jAddQuantTable -#define jpeg_quality_scaling jQualityScaling -#define jpeg_simple_progression jSimProgress -#define jpeg_suppress_tables jSuppressTables -#define jpeg_alloc_quant_table jAlcQTable -#define jpeg_alloc_huff_table jAlcHTable -#define jpeg_start_compress jStrtCompress -#define jpeg_write_scanlines jWrtScanlines -#define jpeg_finish_compress jFinCompress -#define jpeg_write_raw_data jWrtRawData -#define jpeg_write_marker jWrtMarker -#define jpeg_write_m_header jWrtMHeader -#define jpeg_write_m_byte jWrtMByte -#define jpeg_write_tables jWrtTables -#define jpeg_read_header jReadHeader -#define jpeg_start_decompress jStrtDecompress -#define jpeg_read_scanlines jReadScanlines -#define jpeg_finish_decompress jFinDecompress -#define jpeg_read_raw_data jReadRawData -#define jpeg_has_multiple_scans jHasMultScn -#define jpeg_start_output jStrtOutput -#define jpeg_finish_output jFinOutput -#define jpeg_input_complete jInComplete -#define jpeg_new_colormap jNewCMap -#define jpeg_consume_input jConsumeInput -#define jpeg_calc_output_dimensions jCalcDimensions -#define jpeg_save_markers jSaveMarkers -#define jpeg_set_marker_processor jSetMarker -#define jpeg_read_coefficients jReadCoefs -#define jpeg_write_coefficients jWrtCoefs -#define jpeg_copy_critical_parameters jCopyCrit -#define jpeg_abort_compress jAbrtCompress -#define jpeg_abort_decompress jAbrtDecompress -#define jpeg_abort jAbort -#define jpeg_destroy jDestroy -#define jpeg_resync_to_restart jResyncRestart -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Default error-management setup */ -EXTERN(struct jpeg_error_mgr *) jpeg_std_error - JPP((struct jpeg_error_mgr * err)); - -/* Initialization of JPEG compression objects. - * jpeg_create_compress() and jpeg_create_decompress() are the exported - * names that applications should call. These expand to calls on - * jpeg_CreateCompress and jpeg_CreateDecompress with additional information - * passed for version mismatch checking. - * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. - */ -#define jpeg_create_compress(cinfo) \ - jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ - (size_t) sizeof(struct jpeg_compress_struct)) -#define jpeg_create_decompress(cinfo) \ - jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ - (size_t) sizeof(struct jpeg_decompress_struct)) -EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, - int version, size_t structsize)); -EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, - int version, size_t structsize)); -/* Destruction of JPEG compression objects */ -EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); - -/* Standard data source and destination managers: stdio streams. */ -/* Caller is responsible for opening the file before and closing after. */ -EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); -EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); - -/* Default parameter setup for compression */ -EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); -/* Compression parameter setup aids */ -EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, - J_COLOR_SPACE colorspace)); -EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, - boolean force_baseline)); -EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, - int scale_factor, - boolean force_baseline)); -EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, - boolean force_baseline)); -EXTERN(int) jpeg_quality_scaling JPP((int quality)); -EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, - boolean suppress)); -EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); -EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); - -/* Main entry points for compression */ -EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, - boolean write_all_tables)); -EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION num_lines)); -EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); - -/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ -EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION num_lines)); - -/* Write a special marker. See libjpeg.doc concerning safe usage. */ -EXTERN(void) jpeg_write_marker - JPP((j_compress_ptr cinfo, int marker, - const JOCTET * dataptr, unsigned int datalen)); -/* Same, but piecemeal. */ -EXTERN(void) jpeg_write_m_header - JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); -EXTERN(void) jpeg_write_m_byte - JPP((j_compress_ptr cinfo, int val)); - -/* Alternate compression function: just write an abbreviated table file */ -EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); - -/* Decompression startup: read start of JPEG datastream to see what's there */ -EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, - boolean require_image)); -/* Return value is one of: */ -#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ -#define JPEG_HEADER_OK 1 /* Found valid image datastream */ -#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ -/* If you pass require_image = TRUE (normal case), you need not check for - * a TABLES_ONLY return code; an abbreviated file will cause an error exit. - * JPEG_SUSPENDED is only possible if you use a data source module that can - * give a suspension return (the stdio source module doesn't). - */ - -/* Main entry points for decompression */ -EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_start_tile_decompress JPP((j_decompress_ptr cinfo)); -EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION max_lines)); -EXTERN(JDIMENSION) jpeg_read_scanlines_from JPP((j_decompress_ptr cinfo, - JSAMPARRAY scanlines, - int line_offset, - JDIMENSION max_lines)); -EXTERN(JDIMENSION) jpeg_read_tile_scanline JPP((j_decompress_ptr cinfo, - huffman_index *index, - JSAMPARRAY scanlines)); -EXTERN(void) jpeg_init_read_tile_scanline JPP((j_decompress_ptr cinfo, - huffman_index *index, - int *start_x, int *start_y, - int *width, int *height)); -EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); - -/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ -EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION max_lines)); - -/* Additional entry points for buffered-image mode. */ -EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, - int scan_number)); -EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); -EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); -/* Return value is one of: */ -/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ -#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ -#define JPEG_REACHED_EOI 2 /* Reached end of image */ -#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ -#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ - -/* Precalculate output dimensions for current decompression parameters. */ -EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); - -/* Control saving of COM and APPn markers into marker_list. */ -EXTERN(void) jpeg_save_markers - JPP((j_decompress_ptr cinfo, int marker_code, - unsigned int length_limit)); - -/* Install a special processing method for COM or APPn markers. */ -EXTERN(void) jpeg_set_marker_processor - JPP((j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine)); - -/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ -EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_build_huffman_index - JPP((j_decompress_ptr cinfo, huffman_index *index)); -EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays)); -EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, - j_compress_ptr dstinfo)); - -/* If you choose to abort compression or decompression before completing - * jpeg_finish_(de)compress, then you need to clean up to release memory, - * temporary files, etc. You can just call jpeg_destroy_(de)compress - * if you're done with the JPEG object, but if you want to clean it up and - * reuse it, call this: - */ -EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); - -/* Generic versions of jpeg_abort and jpeg_destroy that work on either - * flavor of JPEG object. These may be more convenient in some places. - */ -EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); -EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); - -/* Default restart-marker-resync procedure for use by data source modules */ -EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, - int desired)); - -EXTERN(void) jpeg_configure_huffman_decoder(j_decompress_ptr cinfo, - huffman_offset_data offset); -EXTERN(void) jpeg_get_huffman_decoder_configuration(j_decompress_ptr cinfo, - huffman_offset_data *offset); -EXTERN(void) jpeg_create_huffman_index(j_decompress_ptr cinfo, - huffman_index *index); -EXTERN(void) jpeg_configure_huffman_index_scan(j_decompress_ptr cinfo, - huffman_index *index, int scan_no, int offset); -EXTERN(void) jpeg_destroy_huffman_index(huffman_index *index); - - -/* These marker codes are exported since applications and data source modules - * are likely to want to use them. - */ - -#define JPEG_RST0 0xD0 /* RST0 marker code */ -#define JPEG_EOI 0xD9 /* EOI marker code */ -#define JPEG_APP0 0xE0 /* APP0 marker code */ -#define JPEG_COM 0xFE /* COM marker code */ - - -/* If we have a brain-damaged compiler that emits warnings (or worse, errors) - * for structure definitions that are never filled in, keep it quiet by - * supplying dummy definitions for the various substructures. - */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -struct jpeg_comp_master { long dummy; }; -struct jpeg_c_main_controller { long dummy; }; -struct jpeg_c_prep_controller { long dummy; }; -struct jpeg_c_coef_controller { long dummy; }; -struct jpeg_marker_writer { long dummy; }; -struct jpeg_color_converter { long dummy; }; -struct jpeg_downsampler { long dummy; }; -struct jpeg_forward_dct { long dummy; }; -struct jpeg_entropy_encoder { long dummy; }; -struct jpeg_decomp_master { long dummy; }; -struct jpeg_d_main_controller { long dummy; }; -struct jpeg_d_coef_controller { long dummy; }; -struct jpeg_d_post_controller { long dummy; }; -struct jpeg_input_controller { long dummy; }; -struct jpeg_marker_reader { long dummy; }; -struct jpeg_entropy_decoder { long dummy; }; -struct jpeg_inverse_dct { long dummy; }; -struct jpeg_upsampler { long dummy; }; -struct jpeg_color_deconverter { long dummy; }; -struct jpeg_color_quantizer { long dummy; }; -#endif /* JPEG_INTERNALS */ -#endif /* INCOMPLETE_TYPES_BROKEN */ - - -/* - * The JPEG library modules define JPEG_INTERNALS before including this file. - * The internal structure declarations are read only when that is true. - * Applications using the library should not include jpegint.h, but may wish - * to include jerror.h. - */ - -#ifdef JPEG_INTERNALS -#include "jpegint.h" /* fetch private declarations */ -#include "jerror.h" /* fetch error codes too */ -#endif - -#endif /* JPEGLIB_H */ diff --git a/libjpegtwrp/jpegtran.1 b/libjpegtwrp/jpegtran.1 deleted file mode 100644 index 6de18e2af..000000000 --- a/libjpegtwrp/jpegtran.1 +++ /dev/null @@ -1,238 +0,0 @@ -.TH JPEGTRAN 1 "3 August 1997" -.SH NAME -jpegtran \- lossless transformation of JPEG files -.SH SYNOPSIS -.B jpegtran -[ -.I options -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B jpegtran -performs various useful transformations of JPEG files. -It can translate the coded representation from one variant of JPEG to another, -for example from baseline JPEG to progressive JPEG or vice versa. It can also -perform some rearrangements of the image data, for example turning an image -from landscape to portrait format by rotation. -.PP -.B jpegtran -works by rearranging the compressed data (DCT coefficients), without -ever fully decoding the image. Therefore, its transformations are lossless: -there is no image degradation at all, which would not be true if you used -.B djpeg -followed by -.B cjpeg -to accomplish the same conversion. But by the same token, -.B jpegtran -cannot perform lossy operations such as changing the image quality. -.PP -.B jpegtran -reads the named JPEG/JFIF file, or the standard input if no file is -named, and produces a JPEG/JFIF file on the standard output. -.SH OPTIONS -All switch names may be abbreviated; for example, -.B \-optimize -may be written -.B \-opt -or -.BR \-o . -Upper and lower case are equivalent. -British spellings are also accepted (e.g., -.BR \-optimise ), -though for brevity these are not mentioned below. -.PP -To specify the coded JPEG representation used in the output file, -.B jpegtran -accepts a subset of the switches recognized by -.BR cjpeg : -.TP -.B \-optimize -Perform optimization of entropy encoding parameters. -.TP -.B \-progressive -Create progressive JPEG file. -.TP -.BI \-restart " N" -Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is -attached to the number. -.TP -.BI \-scans " file" -Use the scan script given in the specified text file. -.PP -See -.BR cjpeg (1) -for more details about these switches. -If you specify none of these switches, you get a plain baseline-JPEG output -file. The quality setting and so forth are determined by the input file. -.PP -The image can be losslessly transformed by giving one of these switches: -.TP -.B \-flip horizontal -Mirror image horizontally (left-right). -.TP -.B \-flip vertical -Mirror image vertically (top-bottom). -.TP -.B \-rotate 90 -Rotate image 90 degrees clockwise. -.TP -.B \-rotate 180 -Rotate image 180 degrees. -.TP -.B \-rotate 270 -Rotate image 270 degrees clockwise (or 90 ccw). -.TP -.B \-transpose -Transpose image (across UL-to-LR axis). -.TP -.B \-transverse -Transverse transpose (across UR-to-LL axis). -.PP -The transpose transformation has no restrictions regarding image dimensions. -The other transformations operate rather oddly if the image dimensions are not -a multiple of the iMCU size (usually 8 or 16 pixels), because they can only -transform complete blocks of DCT coefficient data in the desired way. -.PP -.BR jpegtran 's -default behavior when transforming an odd-size image is designed -to preserve exact reversibility and mathematical consistency of the -transformation set. As stated, transpose is able to flip the entire image -area. Horizontal mirroring leaves any partial iMCU column at the right edge -untouched, but is able to flip all rows of the image. Similarly, vertical -mirroring leaves any partial iMCU row at the bottom edge untouched, but is -able to flip all columns. The other transforms can be built up as sequences -of transpose and flip operations; for consistency, their actions on edge -pixels are defined to be the same as the end result of the corresponding -transpose-and-flip sequence. -.PP -For practical use, you may prefer to discard any untransformable edge pixels -rather than having a strange-looking strip along the right and/or bottom edges -of a transformed image. To do this, add the -.B \-trim -switch: -.TP -.B \-trim -Drop non-transformable edge blocks. -.PP -Obviously, a transformation with -.B \-trim -is not reversible, so strictly speaking -.B jpegtran -with this switch is not lossless. Also, the expected mathematical -equivalences between the transformations no longer hold. For example, -.B \-rot 270 -trim -trims only the bottom edge, but -.B \-rot 90 -trim -followed by -.B \-rot 180 -trim -trims both edges. -.PP -Another not-strictly-lossless transformation switch is: -.TP -.B \-grayscale -Force grayscale output. -.PP -This option discards the chrominance channels if the input image is YCbCr -(ie, a standard color JPEG), resulting in a grayscale JPEG file. The -luminance channel is preserved exactly, so this is a better method of reducing -to grayscale than decompression, conversion, and recompression. This switch -is particularly handy for fixing a monochrome picture that was mistakenly -encoded as a color JPEG. (In such a case, the space savings from getting rid -of the near-empty chroma channels won't be large; but the decoding time for -a grayscale JPEG is substantially less than that for a color JPEG.) -.PP -.B jpegtran -also recognizes these switches that control what to do with "extra" markers, -such as comment blocks: -.TP -.B \-copy none -Copy no extra markers from source file. This setting suppresses all -comments and other excess baggage present in the source file. -.TP -.B \-copy comments -Copy only comment markers. This setting copies comments from the source file, -but discards any other inessential data. -.TP -.B \-copy all -Copy all extra markers. This setting preserves miscellaneous markers -found in the source file, such as JFIF thumbnails and Photoshop settings. -In some files these extra markers can be sizable. -.PP -The default behavior is -.BR "\-copy comments" . -(Note: in IJG releases v6 and v6a, -.B jpegtran -always did the equivalent of -.BR "\-copy none" .) -.PP -Additional switches recognized by jpegtran are: -.TP -.BI \-maxmemory " N" -Set limit for amount of memory to use in processing large images. Value is -in thousands of bytes, or millions of bytes if "M" is attached to the -number. For example, -.B \-max 4m -selects 4000000 bytes. If more space is needed, temporary files will be used. -.TP -.BI \-outfile " name" -Send output image to the named file, not to standard output. -.TP -.B \-verbose -Enable debug printout. More -.BR \-v 's -give more output. Also, version information is printed at startup. -.TP -.B \-debug -Same as -.BR \-verbose . -.SH EXAMPLES -.LP -This example converts a baseline JPEG file to progressive form: -.IP -.B jpegtran \-progressive -.I foo.jpg -.B > -.I fooprog.jpg -.PP -This example rotates an image 90 degrees clockwise, discarding any -unrotatable edge pixels: -.IP -.B jpegtran \-rot 90 -trim -.I foo.jpg -.B > -.I foo90.jpg -.SH ENVIRONMENT -.TP -.B JPEGMEM -If this environment variable is set, its value is the default memory limit. -The value is specified as described for the -.B \-maxmemory -switch. -.B JPEGMEM -overrides the default value specified when the program was compiled, and -itself is overridden by an explicit -.BR \-maxmemory . -.SH SEE ALSO -.BR cjpeg (1), -.BR djpeg (1), -.BR rdjpgcom (1), -.BR wrjpgcom (1) -.br -Wallace, Gregory K. "The JPEG Still Picture Compression Standard", -Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. -.SH AUTHOR -Independent JPEG Group -.SH BUGS -Arithmetic coding is not supported for legal reasons. -.PP -The transform options can't transform odd-size images perfectly. Use -.B \-trim -if you don't like the results without it. -.PP -The entire image is read into memory and then written out again, even in -cases where this isn't really necessary. Expect swapping on large images, -especially when using the more complex transform options. diff --git a/libjpegtwrp/jpegtran.c b/libjpegtwrp/jpegtran.c deleted file mode 100644 index 20ef111b3..000000000 --- a/libjpegtwrp/jpegtran.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * jpegtran.c - * - * Copyright (C) 1995-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a command-line user interface for JPEG transcoding. - * It is very similar to cjpeg.c, but provides lossless transcoding between - * different JPEG file formats. It also provides some lossless and sort-of- - * lossless transformations of JPEG data. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include "transupp.h" /* Support routines for jpegtran */ -#include "jversion.h" /* for version message */ - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - - -/* - * Argument-parsing code. - * The switch parser is designed to be useful with DOS-style command line - * syntax, ie, intermixed switches and file names, where only the switches - * to the left of a given file name affect processing of that file. - * The main program in this file doesn't actually use this capability... - */ - - -static const char * progname; /* program name for error messages */ -static char * outfilename; /* for -outfile switch */ -static JCOPY_OPTION copyoption; /* -copy switch */ -static jpeg_transform_info transformoption; /* image transformation options */ - - -LOCAL(void) -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -copy none Copy no extra markers from source file\n"); - fprintf(stderr, " -copy comments Copy only comment markers (default)\n"); - fprintf(stderr, " -copy all Copy all extra markers\n"); -#ifdef ENTROPY_OPT_SUPPORTED - fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n"); -#endif -#ifdef C_PROGRESSIVE_SUPPORTED - fprintf(stderr, " -progressive Create progressive JPEG file\n"); -#endif -#if TRANSFORMS_SUPPORTED - fprintf(stderr, "Switches for modifying the image:\n"); - fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n"); - fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n"); - fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n"); - fprintf(stderr, " -transpose Transpose image\n"); - fprintf(stderr, " -transverse Transverse transpose image\n"); - fprintf(stderr, " -trim Drop non-transformable edge blocks\n"); -#endif /* TRANSFORMS_SUPPORTED */ - fprintf(stderr, "Switches for advanced users:\n"); - fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n"); - fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n"); - fprintf(stderr, " -outfile name Specify name for output file\n"); - fprintf(stderr, " -verbose or -debug Emit debug output\n"); - fprintf(stderr, "Switches for wizards:\n"); -#ifdef C_ARITH_CODING_SUPPORTED - fprintf(stderr, " -arithmetic Use arithmetic coding\n"); -#endif -#ifdef C_MULTISCAN_FILES_SUPPORTED - fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n"); -#endif - exit(EXIT_FAILURE); -} - - -LOCAL(void) -select_transform (JXFORM_CODE transform) -/* Silly little routine to detect multiple transform options, - * which we can't handle. - */ -{ -#if TRANSFORMS_SUPPORTED - if (transformoption.transform == JXFORM_NONE || - transformoption.transform == transform) { - transformoption.transform = transform; - } else { - fprintf(stderr, "%s: can only do one image transformation at a time\n", - progname); - usage(); - } -#else - fprintf(stderr, "%s: sorry, image transformation was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif -} - - -LOCAL(int) -parse_switches (j_compress_ptr cinfo, int argc, char **argv, - int last_file_arg_seen, boolean for_real) -/* Parse optional switches. - * Returns argv[] index of first file-name argument (== argc if none). - * Any file names with indexes <= last_file_arg_seen are ignored; - * they have presumably been processed in a previous iteration. - * (Pass 0 for last_file_arg_seen on the first or only iteration.) - * for_real is FALSE on the first (dummy) pass; we may skip any expensive - * processing. - */ -{ - int argn; - char * arg; - boolean simple_progressive; - char * scansarg = NULL; /* saves -scans parm if any */ - - /* Set up default JPEG parameters. */ - simple_progressive = FALSE; - outfilename = NULL; - copyoption = JCOPYOPT_DEFAULT; - transformoption.transform = JXFORM_NONE; - transformoption.trim = FALSE; - transformoption.force_grayscale = FALSE; - cinfo->err->trace_level = 0; - - /* Scan command line options, adjust parameters */ - - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (*arg != '-') { - /* Not a switch, must be a file name argument */ - if (argn <= last_file_arg_seen) { - outfilename = NULL; /* -outfile applies to just one input file */ - continue; /* ignore this name if previously processed */ - } - break; /* else done parsing switches */ - } - arg++; /* advance past switch marker character */ - - if (keymatch(arg, "arithmetic", 1)) { - /* Use arithmetic coding. */ -#ifdef C_ARITH_CODING_SUPPORTED - cinfo->arith_code = TRUE; -#else - fprintf(stderr, "%s: sorry, arithmetic coding not supported\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "copy", 1)) { - /* Select which extra markers to copy. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "none", 1)) { - copyoption = JCOPYOPT_NONE; - } else if (keymatch(argv[argn], "comments", 1)) { - copyoption = JCOPYOPT_COMMENTS; - } else if (keymatch(argv[argn], "all", 1)) { - copyoption = JCOPYOPT_ALL; - } else - usage(); - - } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) { - /* Enable debug printouts. */ - /* On first -d, print version identification */ - static boolean printed_version = FALSE; - - if (! printed_version) { - fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n", - JVERSION, JCOPYRIGHT); - printed_version = TRUE; - } - cinfo->err->trace_level++; - - } else if (keymatch(arg, "flip", 1)) { - /* Mirror left-right or top-bottom. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "horizontal", 1)) - select_transform(JXFORM_FLIP_H); - else if (keymatch(argv[argn], "vertical", 1)) - select_transform(JXFORM_FLIP_V); - else - usage(); - - } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) { - /* Force to grayscale. */ -#if TRANSFORMS_SUPPORTED - transformoption.force_grayscale = TRUE; -#else - select_transform(JXFORM_NONE); /* force an error */ -#endif - - } else if (keymatch(arg, "maxmemory", 3)) { - /* Maximum memory in Kb (or Mb with 'm'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (ch == 'm' || ch == 'M') - lval *= 1000L; - cinfo->mem->max_memory_to_use = lval * 1000L; - - } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) { - /* Enable entropy parm optimization. */ -#ifdef ENTROPY_OPT_SUPPORTED - cinfo->optimize_coding = TRUE; -#else - fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "outfile", 4)) { - /* Set output file name. */ - if (++argn >= argc) /* advance to next argument */ - usage(); - outfilename = argv[argn]; /* save it away for later use */ - - } else if (keymatch(arg, "progressive", 1)) { - /* Select simple progressive mode. */ -#ifdef C_PROGRESSIVE_SUPPORTED - simple_progressive = TRUE; - /* We must postpone execution until num_components is known. */ -#else - fprintf(stderr, "%s: sorry, progressive output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "restart", 1)) { - /* Restart interval in MCU rows (or in MCUs with 'b'). */ - long lval; - char ch = 'x'; - - if (++argn >= argc) /* advance to next argument */ - usage(); - if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1) - usage(); - if (lval < 0 || lval > 65535L) - usage(); - if (ch == 'b' || ch == 'B') { - cinfo->restart_interval = (unsigned int) lval; - cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */ - } else { - cinfo->restart_in_rows = (int) lval; - /* restart_interval will be computed during startup */ - } - - } else if (keymatch(arg, "rotate", 2)) { - /* Rotate 90, 180, or 270 degrees (measured clockwise). */ - if (++argn >= argc) /* advance to next argument */ - usage(); - if (keymatch(argv[argn], "90", 2)) - select_transform(JXFORM_ROT_90); - else if (keymatch(argv[argn], "180", 3)) - select_transform(JXFORM_ROT_180); - else if (keymatch(argv[argn], "270", 3)) - select_transform(JXFORM_ROT_270); - else - usage(); - - } else if (keymatch(arg, "scans", 1)) { - /* Set scan script. */ -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (++argn >= argc) /* advance to next argument */ - usage(); - scansarg = argv[argn]; - /* We must postpone reading the file in case -progressive appears. */ -#else - fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n", - progname); - exit(EXIT_FAILURE); -#endif - - } else if (keymatch(arg, "transpose", 1)) { - /* Transpose (across UL-to-LR axis). */ - select_transform(JXFORM_TRANSPOSE); - - } else if (keymatch(arg, "transverse", 6)) { - /* Transverse transpose (across UR-to-LL axis). */ - select_transform(JXFORM_TRANSVERSE); - - } else if (keymatch(arg, "trim", 3)) { - /* Trim off any partial edge MCUs that the transform can't handle. */ - transformoption.trim = TRUE; - - } else { - usage(); /* bogus switch */ - } - } - - /* Post-switch-scanning cleanup */ - - if (for_real) { - -#ifdef C_PROGRESSIVE_SUPPORTED - if (simple_progressive) /* process -progressive; -scans can override */ - jpeg_simple_progression(cinfo); -#endif - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (scansarg != NULL) /* process -scans if it was present */ - if (! read_scan_script(cinfo, scansarg)) - usage(); -#endif - } - - return argn; /* return index of next arg (file name) */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - struct jpeg_decompress_struct srcinfo; - struct jpeg_compress_struct dstinfo; - struct jpeg_error_mgr jsrcerr, jdsterr; -#ifdef PROGRESS_REPORT - struct cdjpeg_progress_mgr progress; -#endif - jvirt_barray_ptr * src_coef_arrays; - jvirt_barray_ptr * dst_coef_arrays; - int file_index; - FILE * input_file; - FILE * output_file; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "jpegtran"; /* in case C library doesn't provide it */ - - /* Initialize the JPEG decompression object with default error handling. */ - srcinfo.err = jpeg_std_error(&jsrcerr); - jpeg_create_decompress(&srcinfo); - /* Initialize the JPEG compression object with default error handling. */ - dstinfo.err = jpeg_std_error(&jdsterr); - jpeg_create_compress(&dstinfo); - - /* Now safe to enable signal catcher. - * Note: we assume only the decompression object will have virtual arrays. - */ -#ifdef NEED_SIGNAL_CATCHER - enable_signal_catcher((j_common_ptr) &srcinfo); -#endif - - /* Scan command line to find file names. - * It is convenient to use just one switch-parsing routine, but the switch - * values read here are mostly ignored; we will rescan the switches after - * opening the input file. Also note that most of the switches affect the - * destination JPEG object, so we parse into that and then copy over what - * needs to affects the source too. - */ - - file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE); - jsrcerr.trace_level = jdsterr.trace_level; - srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use; - -#ifdef TWO_FILE_COMMANDLINE - /* Must have either -outfile switch or explicit output file name */ - if (outfilename == NULL) { - if (file_index != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - outfilename = argv[file_index+1]; - } else { - if (file_index != argc-1) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - } -#else - /* Unix style: expect zero or one file name */ - if (file_index < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } -#endif /* TWO_FILE_COMMANDLINE */ - - /* Open the input file. */ - if (file_index < argc) { - if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ - input_file = read_stdin(); - } - - /* Open the output file. */ - if (outfilename != NULL) { - if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, outfilename); - exit(EXIT_FAILURE); - } - } else { - /* default output file is stdout */ - output_file = write_stdout(); - } - -#ifdef PROGRESS_REPORT - start_progress_monitor((j_common_ptr) &dstinfo, &progress); -#endif - - /* Specify data source for decompression */ - jpeg_stdio_src(&srcinfo, input_file); - - /* Enable saving of extra markers that we want to copy */ - jcopy_markers_setup(&srcinfo, copyoption); - - /* Read file header */ - (void) jpeg_read_header(&srcinfo, TRUE); - - /* Any space needed by a transform option must be requested before - * jpeg_read_coefficients so that memory allocation will be done right. - */ -#if TRANSFORMS_SUPPORTED - jtransform_request_workspace(&srcinfo, &transformoption); -#endif - - /* Read source file as DCT coefficients */ - src_coef_arrays = jpeg_read_coefficients(&srcinfo); - - /* Initialize destination compression parameters from source values */ - jpeg_copy_critical_parameters(&srcinfo, &dstinfo); - - /* Adjust destination parameters if required by transform options; - * also find out which set of coefficient arrays will hold the output. - */ -#if TRANSFORMS_SUPPORTED - dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo, - src_coef_arrays, - &transformoption); -#else - dst_coef_arrays = src_coef_arrays; -#endif - - /* Adjust default compression parameters by re-parsing the options */ - file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE); - - /* Specify data destination for compression */ - jpeg_stdio_dest(&dstinfo, output_file); - - /* Start compressor (note no image data is actually written here) */ - jpeg_write_coefficients(&dstinfo, dst_coef_arrays); - - /* Copy to the output file any extra markers that we want to preserve */ - jcopy_markers_execute(&srcinfo, &dstinfo, copyoption); - - /* Execute image transformation, if any */ -#if TRANSFORMS_SUPPORTED - jtransform_execute_transformation(&srcinfo, &dstinfo, - src_coef_arrays, - &transformoption); -#endif - - /* Finish compression and release memory */ - jpeg_finish_compress(&dstinfo); - jpeg_destroy_compress(&dstinfo); - (void) jpeg_finish_decompress(&srcinfo); - jpeg_destroy_decompress(&srcinfo); - - /* Close files, if we opened them */ - if (input_file != stdin) - fclose(input_file); - if (output_file != stdout) - fclose(output_file); - -#ifdef PROGRESS_REPORT - end_progress_monitor((j_common_ptr) &dstinfo); -#endif - - /* All done. */ - exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/libjpegtwrp/jquant1.c b/libjpegtwrp/jquant1.c deleted file mode 100644 index b2f96aa15..000000000 --- a/libjpegtwrp/jquant1.c +++ /dev/null @@ -1,856 +0,0 @@ -/* - * jquant1.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains 1-pass color quantization (color mapping) routines. - * These routines provide mapping to a fixed color map using equally spaced - * color values. Optional Floyd-Steinberg or ordered dithering is available. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef QUANT_1PASS_SUPPORTED - - -/* - * The main purpose of 1-pass quantization is to provide a fast, if not very - * high quality, colormapped output capability. A 2-pass quantizer usually - * gives better visual quality; however, for quantized grayscale output this - * quantizer is perfectly adequate. Dithering is highly recommended with this - * quantizer, though you can turn it off if you really want to. - * - * In 1-pass quantization the colormap must be chosen in advance of seeing the - * image. We use a map consisting of all combinations of Ncolors[i] color - * values for the i'th component. The Ncolors[] values are chosen so that - * their product, the total number of colors, is no more than that requested. - * (In most cases, the product will be somewhat less.) - * - * Since the colormap is orthogonal, the representative value for each color - * component can be determined without considering the other components; - * then these indexes can be combined into a colormap index by a standard - * N-dimensional-array-subscript calculation. Most of the arithmetic involved - * can be precalculated and stored in the lookup table colorindex[]. - * colorindex[i][j] maps pixel value j in component i to the nearest - * representative value (grid plane) for that component; this index is - * multiplied by the array stride for component i, so that the - * index of the colormap entry closest to a given pixel value is just - * sum( colorindex[component-number][pixel-component-value] ) - * Aside from being fast, this scheme allows for variable spacing between - * representative values with no additional lookup cost. - * - * If gamma correction has been applied in color conversion, it might be wise - * to adjust the color grid spacing so that the representative colors are - * equidistant in linear space. At this writing, gamma correction is not - * implemented by jdcolor, so nothing is done here. - */ - - -/* Declarations for ordered dithering. - * - * We use a standard 16x16 ordered dither array. The basic concept of ordered - * dithering is described in many references, for instance Dale Schumacher's - * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991). - * In place of Schumacher's comparisons against a "threshold" value, we add a - * "dither" value to the input pixel and then round the result to the nearest - * output value. The dither value is equivalent to (0.5 - threshold) times - * the distance between output values. For ordered dithering, we assume that - * the output colors are equally spaced; if not, results will probably be - * worse, since the dither may be too much or too little at a given point. - * - * The normal calculation would be to form pixel value + dither, range-limit - * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual. - * We can skip the separate range-limiting step by extending the colorindex - * table in both directions. - */ - -#define ODITHER_SIZE 16 /* dimension of dither matrix */ -/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */ -#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */ -#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */ - -typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE]; -typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE]; - -static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { - /* Bayer's order-4 dither array. Generated by the code given in - * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I. - * The values in this array must range from 0 to ODITHER_CELLS-1. - */ - { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 }, - { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 }, - { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 }, - { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 }, - { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 }, - { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 }, - { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 }, - { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 }, - { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 }, - { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 }, - { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 }, - { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 }, - { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 }, - { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 }, - { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 }, - { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 } -}; - - -/* Declarations for Floyd-Steinberg dithering. - * - * Errors are accumulated into the array fserrors[], at a resolution of - * 1/16th of a pixel count. The error at a given pixel is propagated - * to its not-yet-processed neighbors using the standard F-S fractions, - * ... (here) 7/16 - * 3/16 5/16 1/16 - * We work left-to-right on even rows, right-to-left on odd rows. - * - * We can get away with a single array (holding one row's worth of errors) - * by using it to store the current row's errors at pixel columns not yet - * processed, but the next row's errors at columns already processed. We - * need only a few extra variables to hold the errors immediately around the - * current column. (If we are lucky, those variables are in registers, but - * even if not, they're probably cheaper to access than array elements are.) - * - * The fserrors[] array is indexed [component#][position]. - * We provide (#columns + 2) entries per component; the extra entry at each - * end saves us from special-casing the first and last pixels. - * - * Note: on a wide image, we might not have enough room in a PC's near data - * segment to hold the error array; so it is allocated with alloc_large. - */ - -#if BITS_IN_JSAMPLE == 8 -typedef INT16 FSERROR; /* 16 bits should be enough */ -typedef int LOCFSERROR; /* use 'int' for calculation temps */ -#else -typedef INT32 FSERROR; /* may need more than 16 bits */ -typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ -#endif - -typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ - - -/* Private subobject */ - -#define MAX_Q_COMPS 4 /* max components I can handle */ - -typedef struct { - struct jpeg_color_quantizer pub; /* public fields */ - - /* Initially allocated colormap is saved here */ - JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */ - int sv_actual; /* number of entries in use */ - - JSAMPARRAY colorindex; /* Precomputed mapping for speed */ - /* colorindex[i][j] = index of color closest to pixel value j in component i, - * premultiplied as described above. Since colormap indexes must fit into - * JSAMPLEs, the entries of this array will too. - */ - boolean is_padded; /* is the colorindex padded for odither? */ - - int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ - - /* Variables for ordered dithering */ - int row_index; /* cur row's vertical index in dither matrix */ - ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */ - - /* Variables for Floyd-Steinberg dithering */ - FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ - boolean on_odd_row; /* flag to remember which row we are on */ -} my_cquantizer; - -typedef my_cquantizer * my_cquantize_ptr; - - -/* - * Policy-making subroutines for create_colormap and create_colorindex. - * These routines determine the colormap to be used. The rest of the module - * only assumes that the colormap is orthogonal. - * - * * select_ncolors decides how to divvy up the available colors - * among the components. - * * output_value defines the set of representative values for a component. - * * largest_input_value defines the mapping from input values to - * representative values for a component. - * Note that the latter two routines may impose different policies for - * different components, though this is not currently done. - */ - - -LOCAL(int) -select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) -/* Determine allocation of desired colors to components, */ -/* and fill in Ncolors[] array to indicate choice. */ -/* Return value is total number of colors (product of Ncolors[] values). */ -{ - int nc = cinfo->out_color_components; /* number of color components */ - int max_colors = cinfo->desired_number_of_colors; - int total_colors, iroot, i, j; - boolean changed; - long temp; - static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; - - /* We can allocate at least the nc'th root of max_colors per component. */ - /* Compute floor(nc'th root of max_colors). */ - iroot = 1; - do { - iroot++; - temp = iroot; /* set temp = iroot ** nc */ - for (i = 1; i < nc; i++) - temp *= iroot; - } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */ - iroot--; /* now iroot = floor(root) */ - - /* Must have at least 2 color values per component */ - if (iroot < 2) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp); - - /* Initialize to iroot color values for each component */ - total_colors = 1; - for (i = 0; i < nc; i++) { - Ncolors[i] = iroot; - total_colors *= iroot; - } - /* We may be able to increment the count for one or more components without - * exceeding max_colors, though we know not all can be incremented. - * Sometimes, the first component can be incremented more than once! - * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.) - * In RGB colorspace, try to increment G first, then R, then B. - */ - do { - changed = FALSE; - for (i = 0; i < nc; i++) { - j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i); - /* calculate new total_colors if Ncolors[j] is incremented */ - temp = total_colors / Ncolors[j]; - temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */ - if (temp > (long) max_colors) - break; /* won't fit, done with this pass */ - Ncolors[j]++; /* OK, apply the increment */ - total_colors = (int) temp; - changed = TRUE; - } - } while (changed); - - return total_colors; -} - - -LOCAL(int) -output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) -/* Return j'th output value, where j will range from 0 to maxj */ -/* The output values must fall in 0..MAXJSAMPLE in increasing order */ -{ - /* We always provide values 0 and MAXJSAMPLE for each component; - * any additional values are equally spaced between these limits. - * (Forcing the upper and lower values to the limits ensures that - * dithering can't produce a color outside the selected gamut.) - */ - return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); -} - - -LOCAL(int) -largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) -/* Return largest input value that should map to j'th output value */ -/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ -{ - /* Breakpoints are halfway between values returned by output_value */ - return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); -} - - -/* - * Create the colormap. - */ - -LOCAL(void) -create_colormap (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPARRAY colormap; /* Created colormap */ - int total_colors; /* Number of distinct output colors */ - int i,j,k, nci, blksize, blkdist, ptr, val; - - /* Select number of colors for each component */ - total_colors = select_ncolors(cinfo, cquantize->Ncolors); - - /* Report selected color counts */ - if (cinfo->out_color_components == 3) - TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS, - total_colors, cquantize->Ncolors[0], - cquantize->Ncolors[1], cquantize->Ncolors[2]); - else - TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors); - - /* Allocate and fill in the colormap. */ - /* The colors are ordered in the map in standard row-major order, */ - /* i.e. rightmost (highest-indexed) color changes most rapidly. */ - - colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components); - - /* blksize is number of adjacent repeated entries for a component */ - /* blkdist is distance between groups of identical entries for a component */ - blkdist = total_colors; - - for (i = 0; i < cinfo->out_color_components; i++) { - /* fill in colormap entries for i'th color component */ - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - blksize = blkdist / nci; - for (j = 0; j < nci; j++) { - /* Compute j'th output value (out of nci) for component */ - val = output_value(cinfo, i, j, nci-1); - /* Fill in all colormap entries that have this value of this component */ - for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) { - /* fill in blksize entries beginning at ptr */ - for (k = 0; k < blksize; k++) - colormap[i][ptr+k] = (JSAMPLE) val; - } - } - blkdist = blksize; /* blksize of this color is blkdist of next */ - } - - /* Save the colormap in private storage, - * where it will survive color quantization mode changes. - */ - cquantize->sv_colormap = colormap; - cquantize->sv_actual = total_colors; -} - - -/* - * Create the color index table. - */ - -LOCAL(void) -create_colorindex (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPROW indexptr; - int i,j,k, nci, blksize, val, pad; - - /* For ordered dither, we pad the color index tables by MAXJSAMPLE in - * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE). - * This is not necessary in the other dithering modes. However, we - * flag whether it was done in case user changes dithering mode. - */ - if (cinfo->dither_mode == JDITHER_ORDERED) { - pad = MAXJSAMPLE*2; - cquantize->is_padded = TRUE; - } else { - pad = 0; - cquantize->is_padded = FALSE; - } - - cquantize->colorindex = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (MAXJSAMPLE+1 + pad), - (JDIMENSION) cinfo->out_color_components); - - /* blksize is number of adjacent repeated entries for a component */ - blksize = cquantize->sv_actual; - - for (i = 0; i < cinfo->out_color_components; i++) { - /* fill in colorindex entries for i'th color component */ - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - blksize = blksize / nci; - - /* adjust colorindex pointers to provide padding at negative indexes. */ - if (pad) - cquantize->colorindex[i] += MAXJSAMPLE; - - /* in loop, val = index of current output value, */ - /* and k = largest j that maps to current val */ - indexptr = cquantize->colorindex[i]; - val = 0; - k = largest_input_value(cinfo, i, 0, nci-1); - for (j = 0; j <= MAXJSAMPLE; j++) { - while (j > k) /* advance val if past boundary */ - k = largest_input_value(cinfo, i, ++val, nci-1); - /* premultiply so that no multiplication needed in main processing */ - indexptr[j] = (JSAMPLE) (val * blksize); - } - /* Pad at both ends if necessary */ - if (pad) - for (j = 1; j <= MAXJSAMPLE; j++) { - indexptr[-j] = indexptr[0]; - indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE]; - } - } -} - - -/* - * Create an ordered-dither array for a component having ncolors - * distinct output values. - */ - -LOCAL(ODITHER_MATRIX_PTR) -make_odither_array (j_decompress_ptr cinfo, int ncolors) -{ - ODITHER_MATRIX_PTR odither; - int j,k; - INT32 num,den; - - odither = (ODITHER_MATRIX_PTR) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ODITHER_MATRIX)); - /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1). - * Hence the dither value for the matrix cell with fill order f - * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). - * On 16-bit-int machine, be careful to avoid overflow. - */ - den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); - for (j = 0; j < ODITHER_SIZE; j++) { - for (k = 0; k < ODITHER_SIZE; k++) { - num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) - * MAXJSAMPLE; - /* Ensure round towards zero despite C's lack of consistency - * about rounding negative values in integer division... - */ - odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den); - } - } - return odither; -} - - -/* - * Create the ordered-dither tables. - * Components having the same number of representative colors may - * share a dither table. - */ - -LOCAL(void) -create_odither_tables (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - ODITHER_MATRIX_PTR odither; - int i, j, nci; - - for (i = 0; i < cinfo->out_color_components; i++) { - nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ - odither = NULL; /* search for matching prior component */ - for (j = 0; j < i; j++) { - if (nci == cquantize->Ncolors[j]) { - odither = cquantize->odither[j]; - break; - } - } - if (odither == NULL) /* need a new table? */ - odither = make_odither_array(cinfo, nci); - cquantize->odither[i] = odither; - } -} - - -/* - * Map some rows of pixels to the output colormapped representation. - */ - -METHODDEF(void) -color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - JSAMPARRAY colorindex = cquantize->colorindex; - register int pixcode, ci; - register JSAMPROW ptrin, ptrout; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - register int nc = cinfo->out_color_components; - - for (row = 0; row < num_rows; row++) { - ptrin = input_buf[row]; - ptrout = output_buf[row]; - for (col = width; col > 0; col--) { - pixcode = 0; - for (ci = 0; ci < nc; ci++) { - pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]); - } - *ptrout++ = (JSAMPLE) pixcode; - } - } -} - - -METHODDEF(void) -color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* Fast path for out_color_components==3, no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register int pixcode; - register JSAMPROW ptrin, ptrout; - JSAMPROW colorindex0 = cquantize->colorindex[0]; - JSAMPROW colorindex1 = cquantize->colorindex[1]; - JSAMPROW colorindex2 = cquantize->colorindex[2]; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - ptrin = input_buf[row]; - ptrout = output_buf[row]; - for (col = width; col > 0; col--) { - pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]); - pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]); - pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]); - *ptrout++ = (JSAMPLE) pixcode; - } - } -} - - -METHODDEF(void) -quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, with ordered dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex_ci; - int * dither; /* points to active row of dither matrix */ - int row_index, col_index; /* current indexes into dither matrix */ - int nc = cinfo->out_color_components; - int ci; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - /* Initialize output values to 0 so can process components separately */ - jzero_far((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); - row_index = cquantize->row_index; - for (ci = 0; ci < nc; ci++) { - input_ptr = input_buf[row] + ci; - output_ptr = output_buf[row]; - colorindex_ci = cquantize->colorindex[ci]; - dither = cquantize->odither[ci][row_index]; - col_index = 0; - - for (col = width; col > 0; col--) { - /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE, - * select output value, accumulate into output code for this pixel. - * Range-limiting need not be done explicitly, as we have extended - * the colorindex table to produce the right answers for out-of-range - * inputs. The maximum dither is +- MAXJSAMPLE; this sets the - * required amount of padding. - */ - *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]]; - input_ptr += nc; - output_ptr++; - col_index = (col_index + 1) & ODITHER_MASK; - } - } - /* Advance row index for next row */ - row_index = (row_index + 1) & ODITHER_MASK; - cquantize->row_index = row_index; - } -} - - -METHODDEF(void) -quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* Fast path for out_color_components==3, with ordered dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register int pixcode; - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex0 = cquantize->colorindex[0]; - JSAMPROW colorindex1 = cquantize->colorindex[1]; - JSAMPROW colorindex2 = cquantize->colorindex[2]; - int * dither0; /* points to active row of dither matrix */ - int * dither1; - int * dither2; - int row_index, col_index; /* current indexes into dither matrix */ - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - row_index = cquantize->row_index; - input_ptr = input_buf[row]; - output_ptr = output_buf[row]; - dither0 = cquantize->odither[0][row_index]; - dither1 = cquantize->odither[1][row_index]; - dither2 = cquantize->odither[2][row_index]; - col_index = 0; - - for (col = width; col > 0; col--) { - pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) + - dither0[col_index]]); - pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) + - dither1[col_index]]); - pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) + - dither2[col_index]]); - *output_ptr++ = (JSAMPLE) pixcode; - col_index = (col_index + 1) & ODITHER_MASK; - } - row_index = (row_index + 1) & ODITHER_MASK; - cquantize->row_index = row_index; - } -} - - -METHODDEF(void) -quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, - JSAMPARRAY output_buf, int num_rows) -/* General case, with Floyd-Steinberg dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - register LOCFSERROR cur; /* current error or pixel value */ - LOCFSERROR belowerr; /* error for pixel below cur */ - LOCFSERROR bpreverr; /* error for below/prev col */ - LOCFSERROR bnexterr; /* error for below/next col */ - LOCFSERROR delta; - register FSERRPTR errorptr; /* => fserrors[] at column before current */ - register JSAMPROW input_ptr; - register JSAMPROW output_ptr; - JSAMPROW colorindex_ci; - JSAMPROW colormap_ci; - int pixcode; - int nc = cinfo->out_color_components; - int dir; /* 1 for left-to-right, -1 for right-to-left */ - int dirnc; /* dir * nc */ - int ci; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - JSAMPLE *range_limit = cinfo->sample_range_limit; - SHIFT_TEMPS - - for (row = 0; row < num_rows; row++) { - /* Initialize output values to 0 so can process components separately */ - jzero_far((void FAR *) output_buf[row], - (size_t) (width * SIZEOF(JSAMPLE))); - for (ci = 0; ci < nc; ci++) { - input_ptr = input_buf[row] + ci; - output_ptr = output_buf[row]; - if (cquantize->on_odd_row) { - /* work right to left in this row */ - input_ptr += (width-1) * nc; /* so point to rightmost pixel */ - output_ptr += width-1; - dir = -1; - dirnc = -nc; - errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */ - } else { - /* work left to right in this row */ - dir = 1; - dirnc = nc; - errorptr = cquantize->fserrors[ci]; /* => entry before first column */ - } - colorindex_ci = cquantize->colorindex[ci]; - colormap_ci = cquantize->sv_colormap[ci]; - /* Preset error values: no error propagated to first pixel from left */ - cur = 0; - /* and no error propagated to row below yet */ - belowerr = bpreverr = 0; - - for (col = width; col > 0; col--) { - /* cur holds the error propagated from the previous pixel on the - * current line. Add the error propagated from the previous line - * to form the complete error correction term for this pixel, and - * round the error term (which is expressed * 16) to an integer. - * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct - * for either sign of the error value. - * Note: errorptr points to *previous* column's array entry. - */ - cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4); - /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. - * The maximum error is +- MAXJSAMPLE; this sets the required size - * of the range_limit array. - */ - cur += GETJSAMPLE(*input_ptr); - cur = GETJSAMPLE(range_limit[cur]); - /* Select output value, accumulate into output code for this pixel */ - pixcode = GETJSAMPLE(colorindex_ci[cur]); - *output_ptr += (JSAMPLE) pixcode; - /* Compute actual representation error at this pixel */ - /* Note: we can do this even though we don't have the final */ - /* pixel code, because the colormap is orthogonal. */ - cur -= GETJSAMPLE(colormap_ci[pixcode]); - /* Compute error fractions to be propagated to adjacent pixels. - * Add these into the running sums, and simultaneously shift the - * next-line error sums left by 1 column. - */ - bnexterr = cur; - delta = cur * 2; - cur += delta; /* form error * 3 */ - errorptr[0] = (FSERROR) (bpreverr + cur); - cur += delta; /* form error * 5 */ - bpreverr = belowerr + cur; - belowerr = bnexterr; - cur += delta; /* form error * 7 */ - /* At this point cur contains the 7/16 error value to be propagated - * to the next pixel on the current line, and all the errors for the - * next line have been shifted over. We are therefore ready to move on. - */ - input_ptr += dirnc; /* advance input ptr to next column */ - output_ptr += dir; /* advance output ptr to next column */ - errorptr += dir; /* advance errorptr to current column */ - } - /* Post-loop cleanup: we must unload the final error value into the - * final fserrors[] entry. Note we need not unload belowerr because - * it is for the dummy column before or after the actual array. - */ - errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */ - } - cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE); - } -} - - -/* - * Allocate workspace for Floyd-Steinberg errors. - */ - -LOCAL(void) -alloc_fs_workspace (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - size_t arraysize; - int i; - - arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); - for (i = 0; i < cinfo->out_color_components; i++) { - cquantize->fserrors[i] = (FSERRPTR) - (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); - } -} - - -/* - * Initialize for one-pass color quantization. - */ - -METHODDEF(void) -start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - size_t arraysize; - int i; - - /* Install my colormap. */ - cinfo->colormap = cquantize->sv_colormap; - cinfo->actual_number_of_colors = cquantize->sv_actual; - - /* Initialize for desired dithering mode. */ - switch (cinfo->dither_mode) { - case JDITHER_NONE: - if (cinfo->out_color_components == 3) - cquantize->pub.color_quantize = color_quantize3; - else - cquantize->pub.color_quantize = color_quantize; - break; - case JDITHER_ORDERED: - if (cinfo->out_color_components == 3) - cquantize->pub.color_quantize = quantize3_ord_dither; - else - cquantize->pub.color_quantize = quantize_ord_dither; - cquantize->row_index = 0; /* initialize state for ordered dither */ - /* If user changed to ordered dither from another mode, - * we must recreate the color index table with padding. - * This will cost extra space, but probably isn't very likely. - */ - if (! cquantize->is_padded) - create_colorindex(cinfo); - /* Create ordered-dither tables if we didn't already. */ - if (cquantize->odither[0] == NULL) - create_odither_tables(cinfo); - break; - case JDITHER_FS: - cquantize->pub.color_quantize = quantize_fs_dither; - cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */ - /* Allocate Floyd-Steinberg workspace if didn't already. */ - if (cquantize->fserrors[0] == NULL) - alloc_fs_workspace(cinfo); - /* Initialize the propagated errors to zero. */ - arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); - for (i = 0; i < cinfo->out_color_components; i++) - jzero_far((void FAR *) cquantize->fserrors[i], arraysize); - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - break; - } -} - - -/* - * Finish up at the end of the pass. - */ - -METHODDEF(void) -finish_pass_1_quant (j_decompress_ptr cinfo) -{ - /* no work in 1-pass case */ -} - - -/* - * Switch to a new external colormap between output passes. - * Shouldn't get to this module! - */ - -METHODDEF(void) -new_color_map_1_quant (j_decompress_ptr cinfo) -{ - ERREXIT(cinfo, JERR_MODE_CHANGE); -} - - -/* - * Module initialization routine for 1-pass color quantization. - */ - -GLOBAL(void) -jinit_1pass_quantizer (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize; - - cquantize = (my_cquantize_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_cquantizer)); - cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; - cquantize->pub.start_pass = start_pass_1_quant; - cquantize->pub.finish_pass = finish_pass_1_quant; - cquantize->pub.new_color_map = new_color_map_1_quant; - cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */ - cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */ - - /* Make sure my internal arrays won't overflow */ - if (cinfo->out_color_components > MAX_Q_COMPS) - ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS); - /* Make sure colormap indexes can be represented by JSAMPLEs */ - if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1)) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1); - - /* Create the colormap and color index table. */ - create_colormap(cinfo); - create_colorindex(cinfo); - - /* Allocate Floyd-Steinberg workspace now if requested. - * We do this now since it is FAR storage and may affect the memory - * manager's space calculations. If the user changes to FS dither - * mode in a later pass, we will allocate the space then, and will - * possibly overrun the max_memory_to_use setting. - */ - if (cinfo->dither_mode == JDITHER_FS) - alloc_fs_workspace(cinfo); -} - -#endif /* QUANT_1PASS_SUPPORTED */ diff --git a/libjpegtwrp/jquant2.c b/libjpegtwrp/jquant2.c deleted file mode 100644 index af601e334..000000000 --- a/libjpegtwrp/jquant2.c +++ /dev/null @@ -1,1310 +0,0 @@ -/* - * jquant2.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains 2-pass color quantization (color mapping) routines. - * These routines provide selection of a custom color map for an image, - * followed by mapping of the image to that color map, with optional - * Floyd-Steinberg dithering. - * It is also possible to use just the second pass to map to an arbitrary - * externally-given color map. - * - * Note: ordered dithering is not supported, since there isn't any fast - * way to compute intercolor distances; it's unclear that ordered dither's - * fundamental assumptions even hold with an irregularly spaced color map. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - -#ifdef QUANT_2PASS_SUPPORTED - - -/* - * This module implements the well-known Heckbert paradigm for color - * quantization. Most of the ideas used here can be traced back to - * Heckbert's seminal paper - * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display", - * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304. - * - * In the first pass over the image, we accumulate a histogram showing the - * usage count of each possible color. To keep the histogram to a reasonable - * size, we reduce the precision of the input; typical practice is to retain - * 5 or 6 bits per color, so that 8 or 4 different input values are counted - * in the same histogram cell. - * - * Next, the color-selection step begins with a box representing the whole - * color space, and repeatedly splits the "largest" remaining box until we - * have as many boxes as desired colors. Then the mean color in each - * remaining box becomes one of the possible output colors. - * - * The second pass over the image maps each input pixel to the closest output - * color (optionally after applying a Floyd-Steinberg dithering correction). - * This mapping is logically trivial, but making it go fast enough requires - * considerable care. - * - * Heckbert-style quantizers vary a good deal in their policies for choosing - * the "largest" box and deciding where to cut it. The particular policies - * used here have proved out well in experimental comparisons, but better ones - * may yet be found. - * - * In earlier versions of the IJG code, this module quantized in YCbCr color - * space, processing the raw upsampled data without a color conversion step. - * This allowed the color conversion math to be done only once per colormap - * entry, not once per pixel. However, that optimization precluded other - * useful optimizations (such as merging color conversion with upsampling) - * and it also interfered with desired capabilities such as quantizing to an - * externally-supplied colormap. We have therefore abandoned that approach. - * The present code works in the post-conversion color space, typically RGB. - * - * To improve the visual quality of the results, we actually work in scaled - * RGB space, giving G distances more weight than R, and R in turn more than - * B. To do everything in integer math, we must use integer scale factors. - * The 2/3/1 scale factors used here correspond loosely to the relative - * weights of the colors in the NTSC grayscale equation. - * If you want to use this code to quantize a non-RGB color space, you'll - * probably need to change these scale factors. - */ - -#define R_SCALE 2 /* scale R distances by this much */ -#define G_SCALE 3 /* scale G distances by this much */ -#define B_SCALE 1 /* and B by this much */ - -/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined - * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B - * and B,G,R orders. If you define some other weird order in jmorecfg.h, - * you'll get compile errors until you extend this logic. In that case - * you'll probably want to tweak the histogram sizes too. - */ - -#if RGB_RED == 0 -#define C0_SCALE R_SCALE -#endif -#if RGB_BLUE == 0 -#define C0_SCALE B_SCALE -#endif -#if RGB_GREEN == 1 -#define C1_SCALE G_SCALE -#endif -#if RGB_RED == 2 -#define C2_SCALE R_SCALE -#endif -#if RGB_BLUE == 2 -#define C2_SCALE B_SCALE -#endif - - -/* - * First we have the histogram data structure and routines for creating it. - * - * The number of bits of precision can be adjusted by changing these symbols. - * We recommend keeping 6 bits for G and 5 each for R and B. - * If you have plenty of memory and cycles, 6 bits all around gives marginally - * better results; if you are short of memory, 5 bits all around will save - * some space but degrade the results. - * To maintain a fully accurate histogram, we'd need to allocate a "long" - * (preferably unsigned long) for each cell. In practice this is overkill; - * we can get by with 16 bits per cell. Few of the cell counts will overflow, - * and clamping those that do overflow to the maximum value will give close- - * enough results. This reduces the recommended histogram size from 256Kb - * to 128Kb, which is a useful savings on PC-class machines. - * (In the second pass the histogram space is re-used for pixel mapping data; - * in that capacity, each cell must be able to store zero to the number of - * desired colors. 16 bits/cell is plenty for that too.) - * Since the JPEG code is intended to run in small memory model on 80x86 - * machines, we can't just allocate the histogram in one chunk. Instead - * of a true 3-D array, we use a row of pointers to 2-D arrays. Each - * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and - * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that - * on 80x86 machines, the pointer row is in near memory but the actual - * arrays are in far memory (same arrangement as we use for image arrays). - */ - -#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */ - -/* These will do the right thing for either R,G,B or B,G,R color order, - * but you may not like the results for other color orders. - */ -#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */ -#define HIST_C1_BITS 6 /* bits of precision in G histogram */ -#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */ - -/* Number of elements along histogram axes. */ -#define HIST_C0_ELEMS (1<cquantize; - register JSAMPROW ptr; - register histptr histp; - register hist3d histogram = cquantize->histogram; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - ptr = input_buf[row]; - for (col = width; col > 0; col--) { - /* get pixel value and index into the histogram */ - histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT] - [GETJSAMPLE(ptr[1]) >> C1_SHIFT] - [GETJSAMPLE(ptr[2]) >> C2_SHIFT]; - /* increment, check for overflow and undo increment if so. */ - if (++(*histp) <= 0) - (*histp)--; - ptr += 3; - } - } -} - - -/* - * Next we have the really interesting routines: selection of a colormap - * given the completed histogram. - * These routines work with a list of "boxes", each representing a rectangular - * subset of the input color space (to histogram precision). - */ - -typedef struct { - /* The bounds of the box (inclusive); expressed as histogram indexes */ - int c0min, c0max; - int c1min, c1max; - int c2min, c2max; - /* The volume (actually 2-norm) of the box */ - INT32 volume; - /* The number of nonzero histogram cells within this box */ - long colorcount; -} box; - -typedef box * boxptr; - - -LOCAL(boxptr) -find_biggest_color_pop (boxptr boxlist, int numboxes) -/* Find the splittable box with the largest color population */ -/* Returns NULL if no splittable boxes remain */ -{ - register boxptr boxp; - register int i; - register long maxc = 0; - boxptr which = NULL; - - for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { - if (boxp->colorcount > maxc && boxp->volume > 0) { - which = boxp; - maxc = boxp->colorcount; - } - } - return which; -} - - -LOCAL(boxptr) -find_biggest_volume (boxptr boxlist, int numboxes) -/* Find the splittable box with the largest (scaled) volume */ -/* Returns NULL if no splittable boxes remain */ -{ - register boxptr boxp; - register int i; - register INT32 maxv = 0; - boxptr which = NULL; - - for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { - if (boxp->volume > maxv) { - which = boxp; - maxv = boxp->volume; - } - } - return which; -} - - -LOCAL(void) -update_box (j_decompress_ptr cinfo, boxptr boxp) -/* Shrink the min/max bounds of a box to enclose only nonzero elements, */ -/* and recompute its volume and population */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - histptr histp; - int c0,c1,c2; - int c0min,c0max,c1min,c1max,c2min,c2max; - INT32 dist0,dist1,dist2; - long ccount; - - c0min = boxp->c0min; c0max = boxp->c0max; - c1min = boxp->c1min; c1max = boxp->c1max; - c2min = boxp->c2min; c2max = boxp->c2max; - - if (c0max > c0min) - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c0min = c0min = c0; - goto have_c0min; - } - } - have_c0min: - if (c0max > c0min) - for (c0 = c0max; c0 >= c0min; c0--) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c0max = c0max = c0; - goto have_c0max; - } - } - have_c0max: - if (c1max > c1min) - for (c1 = c1min; c1 <= c1max; c1++) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c1min = c1min = c1; - goto have_c1min; - } - } - have_c1min: - if (c1max > c1min) - for (c1 = c1max; c1 >= c1min; c1--) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) - if (*histp++ != 0) { - boxp->c1max = c1max = c1; - goto have_c1max; - } - } - have_c1max: - if (c2max > c2min) - for (c2 = c2min; c2 <= c2max; c2++) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1min][c2]; - for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) - if (*histp != 0) { - boxp->c2min = c2min = c2; - goto have_c2min; - } - } - have_c2min: - if (c2max > c2min) - for (c2 = c2max; c2 >= c2min; c2--) - for (c0 = c0min; c0 <= c0max; c0++) { - histp = & histogram[c0][c1min][c2]; - for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) - if (*histp != 0) { - boxp->c2max = c2max = c2; - goto have_c2max; - } - } - have_c2max: - - /* Update box volume. - * We use 2-norm rather than real volume here; this biases the method - * against making long narrow boxes, and it has the side benefit that - * a box is splittable iff norm > 0. - * Since the differences are expressed in histogram-cell units, - * we have to shift back to JSAMPLE units to get consistent distances; - * after which, we scale according to the selected distance scale factors. - */ - dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE; - dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE; - dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE; - boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2; - - /* Now scan remaining volume of box and compute population */ - ccount = 0; - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++, histp++) - if (*histp != 0) { - ccount++; - } - } - boxp->colorcount = ccount; -} - - -LOCAL(int) -median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes, - int desired_colors) -/* Repeatedly select and split the largest box until we have enough boxes */ -{ - int n,lb; - int c0,c1,c2,cmax; - register boxptr b1,b2; - - while (numboxes < desired_colors) { - /* Select box to split. - * Current algorithm: by population for first half, then by volume. - */ - if (numboxes*2 <= desired_colors) { - b1 = find_biggest_color_pop(boxlist, numboxes); - } else { - b1 = find_biggest_volume(boxlist, numboxes); - } - if (b1 == NULL) /* no splittable boxes left! */ - break; - b2 = &boxlist[numboxes]; /* where new box will go */ - /* Copy the color bounds to the new box. */ - b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max; - b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min; - /* Choose which axis to split the box on. - * Current algorithm: longest scaled axis. - * See notes in update_box about scaling distances. - */ - c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE; - c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE; - c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE; - /* We want to break any ties in favor of green, then red, blue last. - * This code does the right thing for R,G,B or B,G,R color orders only. - */ -#if RGB_RED == 0 - cmax = c1; n = 1; - if (c0 > cmax) { cmax = c0; n = 0; } - if (c2 > cmax) { n = 2; } -#else - cmax = c1; n = 1; - if (c2 > cmax) { cmax = c2; n = 2; } - if (c0 > cmax) { n = 0; } -#endif - /* Choose split point along selected axis, and update box bounds. - * Current algorithm: split at halfway point. - * (Since the box has been shrunk to minimum volume, - * any split will produce two nonempty subboxes.) - * Note that lb value is max for lower box, so must be < old max. - */ - switch (n) { - case 0: - lb = (b1->c0max + b1->c0min) / 2; - b1->c0max = lb; - b2->c0min = lb+1; - break; - case 1: - lb = (b1->c1max + b1->c1min) / 2; - b1->c1max = lb; - b2->c1min = lb+1; - break; - case 2: - lb = (b1->c2max + b1->c2min) / 2; - b1->c2max = lb; - b2->c2min = lb+1; - break; - } - /* Update stats for boxes */ - update_box(cinfo, b1); - update_box(cinfo, b2); - numboxes++; - } - return numboxes; -} - - -LOCAL(void) -compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor) -/* Compute representative color for a box, put it in colormap[icolor] */ -{ - /* Current algorithm: mean weighted by pixels (not colors) */ - /* Note it is important to get the rounding correct! */ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - histptr histp; - int c0,c1,c2; - int c0min,c0max,c1min,c1max,c2min,c2max; - long count; - long total = 0; - long c0total = 0; - long c1total = 0; - long c2total = 0; - - c0min = boxp->c0min; c0max = boxp->c0max; - c1min = boxp->c1min; c1max = boxp->c1max; - c2min = boxp->c2min; c2max = boxp->c2max; - - for (c0 = c0min; c0 <= c0max; c0++) - for (c1 = c1min; c1 <= c1max; c1++) { - histp = & histogram[c0][c1][c2min]; - for (c2 = c2min; c2 <= c2max; c2++) { - if ((count = *histp++) != 0) { - total += count; - c0total += ((c0 << C0_SHIFT) + ((1<>1)) * count; - c1total += ((c1 << C1_SHIFT) + ((1<>1)) * count; - c2total += ((c2 << C2_SHIFT) + ((1<>1)) * count; - } - } - } - - cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total); - cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total); - cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total); -} - - -LOCAL(void) -select_colors (j_decompress_ptr cinfo, int desired_colors) -/* Master routine for color selection */ -{ - boxptr boxlist; - int numboxes; - int i; - - /* Allocate workspace for box list */ - boxlist = (boxptr) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box)); - /* Initialize one box containing whole space */ - numboxes = 1; - boxlist[0].c0min = 0; - boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT; - boxlist[0].c1min = 0; - boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT; - boxlist[0].c2min = 0; - boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT; - /* Shrink it to actually-used volume and set its statistics */ - update_box(cinfo, & boxlist[0]); - /* Perform median-cut to produce final box list */ - numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors); - /* Compute the representative color for each box, fill colormap */ - for (i = 0; i < numboxes; i++) - compute_color(cinfo, & boxlist[i], i); - cinfo->actual_number_of_colors = numboxes; - TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes); -} - - -/* - * These routines are concerned with the time-critical task of mapping input - * colors to the nearest color in the selected colormap. - * - * We re-use the histogram space as an "inverse color map", essentially a - * cache for the results of nearest-color searches. All colors within a - * histogram cell will be mapped to the same colormap entry, namely the one - * closest to the cell's center. This may not be quite the closest entry to - * the actual input color, but it's almost as good. A zero in the cache - * indicates we haven't found the nearest color for that cell yet; the array - * is cleared to zeroes before starting the mapping pass. When we find the - * nearest color for a cell, its colormap index plus one is recorded in the - * cache for future use. The pass2 scanning routines call fill_inverse_cmap - * when they need to use an unfilled entry in the cache. - * - * Our method of efficiently finding nearest colors is based on the "locally - * sorted search" idea described by Heckbert and on the incremental distance - * calculation described by Spencer W. Thomas in chapter III.1 of Graphics - * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that - * the distances from a given colormap entry to each cell of the histogram can - * be computed quickly using an incremental method: the differences between - * distances to adjacent cells themselves differ by a constant. This allows a - * fairly fast implementation of the "brute force" approach of computing the - * distance from every colormap entry to every histogram cell. Unfortunately, - * it needs a work array to hold the best-distance-so-far for each histogram - * cell (because the inner loop has to be over cells, not colormap entries). - * The work array elements have to be INT32s, so the work array would need - * 256Kb at our recommended precision. This is not feasible in DOS machines. - * - * To get around these problems, we apply Thomas' method to compute the - * nearest colors for only the cells within a small subbox of the histogram. - * The work array need be only as big as the subbox, so the memory usage - * problem is solved. Furthermore, we need not fill subboxes that are never - * referenced in pass2; many images use only part of the color gamut, so a - * fair amount of work is saved. An additional advantage of this - * approach is that we can apply Heckbert's locality criterion to quickly - * eliminate colormap entries that are far away from the subbox; typically - * three-fourths of the colormap entries are rejected by Heckbert's criterion, - * and we need not compute their distances to individual cells in the subbox. - * The speed of this approach is heavily influenced by the subbox size: too - * small means too much overhead, too big loses because Heckbert's criterion - * can't eliminate as many colormap entries. Empirically the best subbox - * size seems to be about 1/512th of the histogram (1/8th in each direction). - * - * Thomas' article also describes a refined method which is asymptotically - * faster than the brute-force method, but it is also far more complex and - * cannot efficiently be applied to small subboxes. It is therefore not - * useful for programs intended to be portable to DOS machines. On machines - * with plenty of memory, filling the whole histogram in one shot with Thomas' - * refined method might be faster than the present code --- but then again, - * it might not be any faster, and it's certainly more complicated. - */ - - -/* log2(histogram cells in update box) for each axis; this can be adjusted */ -#define BOX_C0_LOG (HIST_C0_BITS-3) -#define BOX_C1_LOG (HIST_C1_BITS-3) -#define BOX_C2_LOG (HIST_C2_BITS-3) - -#define BOX_C0_ELEMS (1<actual_number_of_colors; - int maxc0, maxc1, maxc2; - int centerc0, centerc1, centerc2; - int i, x, ncolors; - INT32 minmaxdist, min_dist, max_dist, tdist; - INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ - - /* Compute true coordinates of update box's upper corner and center. - * Actually we compute the coordinates of the center of the upper-corner - * histogram cell, which are the upper bounds of the volume we care about. - * Note that since ">>" rounds down, the "center" values may be closer to - * min than to max; hence comparisons to them must be "<=", not "<". - */ - maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT)); - centerc0 = (minc0 + maxc0) >> 1; - maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT)); - centerc1 = (minc1 + maxc1) >> 1; - maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT)); - centerc2 = (minc2 + maxc2) >> 1; - - /* For each color in colormap, find: - * 1. its minimum squared-distance to any point in the update box - * (zero if color is within update box); - * 2. its maximum squared-distance to any point in the update box. - * Both of these can be found by considering only the corners of the box. - * We save the minimum distance for each color in mindist[]; - * only the smallest maximum distance is of interest. - */ - minmaxdist = 0x7FFFFFFFL; - - for (i = 0; i < numcolors; i++) { - /* We compute the squared-c0-distance term, then add in the other two. */ - x = GETJSAMPLE(cinfo->colormap[0][i]); - if (x < minc0) { - tdist = (x - minc0) * C0_SCALE; - min_dist = tdist*tdist; - tdist = (x - maxc0) * C0_SCALE; - max_dist = tdist*tdist; - } else if (x > maxc0) { - tdist = (x - maxc0) * C0_SCALE; - min_dist = tdist*tdist; - tdist = (x - minc0) * C0_SCALE; - max_dist = tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - min_dist = 0; - if (x <= centerc0) { - tdist = (x - maxc0) * C0_SCALE; - max_dist = tdist*tdist; - } else { - tdist = (x - minc0) * C0_SCALE; - max_dist = tdist*tdist; - } - } - - x = GETJSAMPLE(cinfo->colormap[1][i]); - if (x < minc1) { - tdist = (x - minc1) * C1_SCALE; - min_dist += tdist*tdist; - tdist = (x - maxc1) * C1_SCALE; - max_dist += tdist*tdist; - } else if (x > maxc1) { - tdist = (x - maxc1) * C1_SCALE; - min_dist += tdist*tdist; - tdist = (x - minc1) * C1_SCALE; - max_dist += tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - if (x <= centerc1) { - tdist = (x - maxc1) * C1_SCALE; - max_dist += tdist*tdist; - } else { - tdist = (x - minc1) * C1_SCALE; - max_dist += tdist*tdist; - } - } - - x = GETJSAMPLE(cinfo->colormap[2][i]); - if (x < minc2) { - tdist = (x - minc2) * C2_SCALE; - min_dist += tdist*tdist; - tdist = (x - maxc2) * C2_SCALE; - max_dist += tdist*tdist; - } else if (x > maxc2) { - tdist = (x - maxc2) * C2_SCALE; - min_dist += tdist*tdist; - tdist = (x - minc2) * C2_SCALE; - max_dist += tdist*tdist; - } else { - /* within cell range so no contribution to min_dist */ - if (x <= centerc2) { - tdist = (x - maxc2) * C2_SCALE; - max_dist += tdist*tdist; - } else { - tdist = (x - minc2) * C2_SCALE; - max_dist += tdist*tdist; - } - } - - mindist[i] = min_dist; /* save away the results */ - if (max_dist < minmaxdist) - minmaxdist = max_dist; - } - - /* Now we know that no cell in the update box is more than minmaxdist - * away from some colormap entry. Therefore, only colors that are - * within minmaxdist of some part of the box need be considered. - */ - ncolors = 0; - for (i = 0; i < numcolors; i++) { - if (mindist[i] <= minmaxdist) - colorlist[ncolors++] = (JSAMPLE) i; - } - return ncolors; -} - - -LOCAL(void) -find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, - int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[]) -/* Find the closest colormap entry for each cell in the update box, - * given the list of candidate colors prepared by find_nearby_colors. - * Return the indexes of the closest entries in the bestcolor[] array. - * This routine uses Thomas' incremental distance calculation method to - * find the distance from a colormap entry to successive cells in the box. - */ -{ - int ic0, ic1, ic2; - int i, icolor; - register INT32 * bptr; /* pointer into bestdist[] array */ - JSAMPLE * cptr; /* pointer into bestcolor[] array */ - INT32 dist0, dist1; /* initial distance values */ - register INT32 dist2; /* current distance in inner loop */ - INT32 xx0, xx1; /* distance increments */ - register INT32 xx2; - INT32 inc0, inc1, inc2; /* initial values for increments */ - /* This array holds the distance to the nearest-so-far color for each cell */ - INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; - - /* Initialize best-distance for each cell of the update box */ - bptr = bestdist; - for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--) - *bptr++ = 0x7FFFFFFFL; - - /* For each color selected by find_nearby_colors, - * compute its distance to the center of each cell in the box. - * If that's less than best-so-far, update best distance and color number. - */ - - /* Nominal steps between cell centers ("x" in Thomas article) */ -#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE) -#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE) -#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE) - - for (i = 0; i < numcolors; i++) { - icolor = GETJSAMPLE(colorlist[i]); - /* Compute (square of) distance from minc0/c1/c2 to this color */ - inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE; - dist0 = inc0*inc0; - inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE; - dist0 += inc1*inc1; - inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE; - dist0 += inc2*inc2; - /* Form the initial difference increments */ - inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0; - inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1; - inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2; - /* Now loop over all cells in box, updating distance per Thomas method */ - bptr = bestdist; - cptr = bestcolor; - xx0 = inc0; - for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) { - dist1 = dist0; - xx1 = inc1; - for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) { - dist2 = dist1; - xx2 = inc2; - for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) { - if (dist2 < *bptr) { - *bptr = dist2; - *cptr = (JSAMPLE) icolor; - } - dist2 += xx2; - xx2 += 2 * STEP_C2 * STEP_C2; - bptr++; - cptr++; - } - dist1 += xx1; - xx1 += 2 * STEP_C1 * STEP_C1; - } - dist0 += xx0; - xx0 += 2 * STEP_C0 * STEP_C0; - } - } -} - - -LOCAL(void) -fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2) -/* Fill the inverse-colormap entries in the update box that contains */ -/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */ -/* we can fill as many others as we wish.) */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - int minc0, minc1, minc2; /* lower left corner of update box */ - int ic0, ic1, ic2; - register JSAMPLE * cptr; /* pointer into bestcolor[] array */ - register histptr cachep; /* pointer into main cache array */ - /* This array lists the candidate colormap indexes. */ - JSAMPLE colorlist[MAXNUMCOLORS]; - int numcolors; /* number of candidate colors */ - /* This array holds the actually closest colormap index for each cell. */ - JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; - - /* Convert cell coordinates to update box ID */ - c0 >>= BOX_C0_LOG; - c1 >>= BOX_C1_LOG; - c2 >>= BOX_C2_LOG; - - /* Compute true coordinates of update box's origin corner. - * Actually we compute the coordinates of the center of the corner - * histogram cell, which are the lower bounds of the volume we care about. - */ - minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1); - minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1); - minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1); - - /* Determine which colormap entries are close enough to be candidates - * for the nearest entry to some cell in the update box. - */ - numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist); - - /* Determine the actually nearest colors. */ - find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist, - bestcolor); - - /* Save the best color numbers (plus 1) in the main cache array */ - c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */ - c1 <<= BOX_C1_LOG; - c2 <<= BOX_C2_LOG; - cptr = bestcolor; - for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) { - for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) { - cachep = & histogram[c0+ic0][c1+ic1][c2]; - for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) { - *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1); - } - } - } -} - - -/* - * Map some rows of pixels to the output colormapped representation. - */ - -METHODDEF(void) -pass2_no_dither (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) -/* This version performs no dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - register JSAMPROW inptr, outptr; - register histptr cachep; - register int c0, c1, c2; - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - - for (row = 0; row < num_rows; row++) { - inptr = input_buf[row]; - outptr = output_buf[row]; - for (col = width; col > 0; col--) { - /* get pixel value and index into the cache */ - c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT; - c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT; - c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT; - cachep = & histogram[c0][c1][c2]; - /* If we have not seen this color before, find nearest colormap entry */ - /* and update the cache */ - if (*cachep == 0) - fill_inverse_cmap(cinfo, c0,c1,c2); - /* Now emit the colormap index for this cell */ - *outptr++ = (JSAMPLE) (*cachep - 1); - } - } -} - - -METHODDEF(void) -pass2_fs_dither (j_decompress_ptr cinfo, - JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) -/* This version performs Floyd-Steinberg dithering */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */ - LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */ - LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */ - register FSERRPTR errorptr; /* => fserrors[] at column before current */ - JSAMPROW inptr; /* => current input pixel */ - JSAMPROW outptr; /* => current output pixel */ - histptr cachep; - int dir; /* +1 or -1 depending on direction */ - int dir3; /* 3*dir, for advancing inptr & errorptr */ - int row; - JDIMENSION col; - JDIMENSION width = cinfo->output_width; - JSAMPLE *range_limit = cinfo->sample_range_limit; - int *error_limit = cquantize->error_limiter; - JSAMPROW colormap0 = cinfo->colormap[0]; - JSAMPROW colormap1 = cinfo->colormap[1]; - JSAMPROW colormap2 = cinfo->colormap[2]; - SHIFT_TEMPS - - for (row = 0; row < num_rows; row++) { - inptr = input_buf[row]; - outptr = output_buf[row]; - if (cquantize->on_odd_row) { - /* work right to left in this row */ - inptr += (width-1) * 3; /* so point to rightmost pixel */ - outptr += width-1; - dir = -1; - dir3 = -3; - errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */ - cquantize->on_odd_row = FALSE; /* flip for next time */ - } else { - /* work left to right in this row */ - dir = 1; - dir3 = 3; - errorptr = cquantize->fserrors; /* => entry before first real column */ - cquantize->on_odd_row = TRUE; /* flip for next time */ - } - /* Preset error values: no error propagated to first pixel from left */ - cur0 = cur1 = cur2 = 0; - /* and no error propagated to row below yet */ - belowerr0 = belowerr1 = belowerr2 = 0; - bpreverr0 = bpreverr1 = bpreverr2 = 0; - - for (col = width; col > 0; col--) { - /* curN holds the error propagated from the previous pixel on the - * current line. Add the error propagated from the previous line - * to form the complete error correction term for this pixel, and - * round the error term (which is expressed * 16) to an integer. - * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct - * for either sign of the error value. - * Note: errorptr points to *previous* column's array entry. - */ - cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4); - cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4); - cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4); - /* Limit the error using transfer function set by init_error_limit. - * See comments with init_error_limit for rationale. - */ - cur0 = error_limit[cur0]; - cur1 = error_limit[cur1]; - cur2 = error_limit[cur2]; - /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. - * The maximum error is +- MAXJSAMPLE (or less with error limiting); - * this sets the required size of the range_limit array. - */ - cur0 += GETJSAMPLE(inptr[0]); - cur1 += GETJSAMPLE(inptr[1]); - cur2 += GETJSAMPLE(inptr[2]); - cur0 = GETJSAMPLE(range_limit[cur0]); - cur1 = GETJSAMPLE(range_limit[cur1]); - cur2 = GETJSAMPLE(range_limit[cur2]); - /* Index into the cache with adjusted pixel value */ - cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT]; - /* If we have not seen this color before, find nearest colormap */ - /* entry and update the cache */ - if (*cachep == 0) - fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT); - /* Now emit the colormap index for this cell */ - { register int pixcode = *cachep - 1; - *outptr = (JSAMPLE) pixcode; - /* Compute representation error for this pixel */ - cur0 -= GETJSAMPLE(colormap0[pixcode]); - cur1 -= GETJSAMPLE(colormap1[pixcode]); - cur2 -= GETJSAMPLE(colormap2[pixcode]); - } - /* Compute error fractions to be propagated to adjacent pixels. - * Add these into the running sums, and simultaneously shift the - * next-line error sums left by 1 column. - */ - { register LOCFSERROR bnexterr, delta; - - bnexterr = cur0; /* Process component 0 */ - delta = cur0 * 2; - cur0 += delta; /* form error * 3 */ - errorptr[0] = (FSERROR) (bpreverr0 + cur0); - cur0 += delta; /* form error * 5 */ - bpreverr0 = belowerr0 + cur0; - belowerr0 = bnexterr; - cur0 += delta; /* form error * 7 */ - bnexterr = cur1; /* Process component 1 */ - delta = cur1 * 2; - cur1 += delta; /* form error * 3 */ - errorptr[1] = (FSERROR) (bpreverr1 + cur1); - cur1 += delta; /* form error * 5 */ - bpreverr1 = belowerr1 + cur1; - belowerr1 = bnexterr; - cur1 += delta; /* form error * 7 */ - bnexterr = cur2; /* Process component 2 */ - delta = cur2 * 2; - cur2 += delta; /* form error * 3 */ - errorptr[2] = (FSERROR) (bpreverr2 + cur2); - cur2 += delta; /* form error * 5 */ - bpreverr2 = belowerr2 + cur2; - belowerr2 = bnexterr; - cur2 += delta; /* form error * 7 */ - } - /* At this point curN contains the 7/16 error value to be propagated - * to the next pixel on the current line, and all the errors for the - * next line have been shifted over. We are therefore ready to move on. - */ - inptr += dir3; /* Advance pixel pointers to next column */ - outptr += dir; - errorptr += dir3; /* advance errorptr to current column */ - } - /* Post-loop cleanup: we must unload the final error values into the - * final fserrors[] entry. Note we need not unload belowerrN because - * it is for the dummy column before or after the actual array. - */ - errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */ - errorptr[1] = (FSERROR) bpreverr1; - errorptr[2] = (FSERROR) bpreverr2; - } -} - - -/* - * Initialize the error-limiting transfer function (lookup table). - * The raw F-S error computation can potentially compute error values of up to - * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be - * much less, otherwise obviously wrong pixels will be created. (Typical - * effects include weird fringes at color-area boundaries, isolated bright - * pixels in a dark area, etc.) The standard advice for avoiding this problem - * is to ensure that the "corners" of the color cube are allocated as output - * colors; then repeated errors in the same direction cannot cause cascading - * error buildup. However, that only prevents the error from getting - * completely out of hand; Aaron Giles reports that error limiting improves - * the results even with corner colors allocated. - * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty - * well, but the smoother transfer function used below is even better. Thanks - * to Aaron Giles for this idea. - */ - -LOCAL(void) -init_error_limit (j_decompress_ptr cinfo) -/* Allocate and fill in the error_limiter table */ -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - int * table; - int in, out; - - table = (int *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int)); - table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */ - cquantize->error_limiter = table; - -#define STEPSIZE ((MAXJSAMPLE+1)/16) - /* Map errors 1:1 up to +- MAXJSAMPLE/16 */ - out = 0; - for (in = 0; in < STEPSIZE; in++, out++) { - table[in] = out; table[-in] = -out; - } - /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */ - for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) { - table[in] = out; table[-in] = -out; - } - /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */ - for (; in <= MAXJSAMPLE; in++) { - table[in] = out; table[-in] = -out; - } -#undef STEPSIZE -} - - -/* - * Finish up at the end of each pass. - */ - -METHODDEF(void) -finish_pass1 (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - - /* Select the representative colors and fill in cinfo->colormap */ - cinfo->colormap = cquantize->sv_colormap; - select_colors(cinfo, cquantize->desired); - /* Force next pass to zero the color index table */ - cquantize->needs_zeroed = TRUE; -} - - -METHODDEF(void) -finish_pass2 (j_decompress_ptr cinfo) -{ - /* no work */ -} - - -/* - * Initialize for each processing pass. - */ - -METHODDEF(void) -start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - hist3d histogram = cquantize->histogram; - int i; - - /* Only F-S dithering or no dithering is supported. */ - /* If user asks for ordered dither, give him F-S. */ - if (cinfo->dither_mode != JDITHER_NONE) - cinfo->dither_mode = JDITHER_FS; - - if (is_pre_scan) { - /* Set up method pointers */ - cquantize->pub.color_quantize = prescan_quantize; - cquantize->pub.finish_pass = finish_pass1; - cquantize->needs_zeroed = TRUE; /* Always zero histogram */ - } else { - /* Set up method pointers */ - if (cinfo->dither_mode == JDITHER_FS) - cquantize->pub.color_quantize = pass2_fs_dither; - else - cquantize->pub.color_quantize = pass2_no_dither; - cquantize->pub.finish_pass = finish_pass2; - - /* Make sure color count is acceptable */ - i = cinfo->actual_number_of_colors; - if (i < 1) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1); - if (i > MAXNUMCOLORS) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); - - if (cinfo->dither_mode == JDITHER_FS) { - size_t arraysize = (size_t) ((cinfo->output_width + 2) * - (3 * SIZEOF(FSERROR))); - /* Allocate Floyd-Steinberg workspace if we didn't already. */ - if (cquantize->fserrors == NULL) - cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); - /* Initialize the propagated errors to zero. */ - jzero_far((void FAR *) cquantize->fserrors, arraysize); - /* Make the error-limit table if we didn't already. */ - if (cquantize->error_limiter == NULL) - init_error_limit(cinfo); - cquantize->on_odd_row = FALSE; - } - - } - /* Zero the histogram or inverse color map, if necessary */ - if (cquantize->needs_zeroed) { - for (i = 0; i < HIST_C0_ELEMS; i++) { - jzero_far((void FAR *) histogram[i], - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); - } - cquantize->needs_zeroed = FALSE; - } -} - - -/* - * Switch to a new external colormap between output passes. - */ - -METHODDEF(void) -new_color_map_2_quant (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; - - /* Reset the inverse color map */ - cquantize->needs_zeroed = TRUE; -} - - -/* - * Module initialization routine for 2-pass color quantization. - */ - -GLOBAL(void) -jinit_2pass_quantizer (j_decompress_ptr cinfo) -{ - my_cquantize_ptr cquantize; - int i; - - cquantize = (my_cquantize_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_cquantizer)); - cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; - cquantize->pub.start_pass = start_pass_2_quant; - cquantize->pub.new_color_map = new_color_map_2_quant; - cquantize->fserrors = NULL; /* flag optional arrays not allocated */ - cquantize->error_limiter = NULL; - - /* Make sure jdmaster didn't give me a case I can't handle */ - if (cinfo->out_color_components != 3) - ERREXIT(cinfo, JERR_NOTIMPL); - - /* Allocate the histogram/inverse colormap storage */ - cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d)); - for (i = 0; i < HIST_C0_ELEMS; i++) { - cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); - } - cquantize->needs_zeroed = TRUE; /* histogram is garbage now */ - - /* Allocate storage for the completed colormap, if required. - * We do this now since it is FAR storage and may affect - * the memory manager's space calculations. - */ - if (cinfo->enable_2pass_quant) { - /* Make sure color count is acceptable */ - int desired = cinfo->desired_number_of_colors; - /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */ - if (desired < 8) - ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8); - /* Make sure colormap indexes can be represented by JSAMPLEs */ - if (desired > MAXNUMCOLORS) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); - cquantize->sv_colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3); - cquantize->desired = desired; - } else - cquantize->sv_colormap = NULL; - - /* Only F-S dithering or no dithering is supported. */ - /* If user asks for ordered dither, give him F-S. */ - if (cinfo->dither_mode != JDITHER_NONE) - cinfo->dither_mode = JDITHER_FS; - - /* Allocate Floyd-Steinberg workspace if necessary. - * This isn't really needed until pass 2, but again it is FAR storage. - * Although we will cope with a later change in dither_mode, - * we do not promise to honor max_memory_to_use if dither_mode changes. - */ - if (cinfo->dither_mode == JDITHER_FS) { - cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR)))); - /* Might as well create the error-limiting table too. */ - init_error_limit(cinfo); - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/libjpegtwrp/jutils.c b/libjpegtwrp/jutils.c deleted file mode 100644 index 616ad0511..000000000 --- a/libjpegtwrp/jutils.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * jutils.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains tables and miscellaneous utility routines needed - * for both compression and decompression. - * Note we prefix all global names with "j" to minimize conflicts with - * a surrounding application. - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* - * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element - * of a DCT block read in natural order (left to right, top to bottom). - */ - -#if 0 /* This table is not actually needed in v6a */ - -const int jpeg_zigzag_order[DCTSIZE2] = { - 0, 1, 5, 6, 14, 15, 27, 28, - 2, 4, 7, 13, 16, 26, 29, 42, - 3, 8, 12, 17, 25, 30, 41, 43, - 9, 11, 18, 24, 31, 40, 44, 53, - 10, 19, 23, 32, 39, 45, 52, 54, - 20, 22, 33, 38, 46, 51, 55, 60, - 21, 34, 37, 47, 50, 56, 59, 61, - 35, 36, 48, 49, 57, 58, 62, 63 -}; - -#endif - -/* - * jpeg_natural_order[i] is the natural-order position of the i'th element - * of zigzag order. - * - * When reading corrupted data, the Huffman decoders could attempt - * to reference an entry beyond the end of this array (if the decoded - * zero run length reaches past the end of the block). To prevent - * wild stores without adding an inner-loop test, we put some extra - * "63"s after the real entries. This will cause the extra coefficient - * to be stored in location 63 of the block, not somewhere random. - * The worst case would be a run-length of 15, which means we need 16 - * fake entries. - */ - -const int jpeg_natural_order[DCTSIZE2+16] = { - 0, 1, 8, 16, 9, 2, 3, 10, - 17, 24, 32, 25, 18, 11, 4, 5, - 12, 19, 26, 33, 40, 48, 41, 34, - 27, 20, 13, 6, 7, 14, 21, 28, - 35, 42, 49, 56, 57, 50, 43, 36, - 29, 22, 15, 23, 30, 37, 44, 51, - 58, 59, 52, 45, 38, 31, 39, 46, - 53, 60, 61, 54, 47, 55, 62, 63, - 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ - 63, 63, 63, 63, 63, 63, 63, 63 -}; - - -/* - * Arithmetic utilities - */ - -GLOBAL(long) -jdiv_round_up (long a, long b) -/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ -/* Assumes a >= 0, b > 0 */ -{ - return (a + b - 1L) / b; -} - - -GLOBAL(long) -jround_up (long a, long b) -/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ -/* Assumes a >= 0, b > 0 */ -{ - a += b - 1L; - return a - (a % b); -} - -GLOBAL(long) -jmin (long a, long b) -{ - return a < b ? a : b; -} - - -/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays - * and coefficient-block arrays. This won't work on 80x86 because the arrays - * are FAR and we're assuming a small-pointer memory model. However, some - * DOS compilers provide far-pointer versions of memcpy() and memset() even - * in the small-model libraries. These will be used if USE_FMEM is defined. - * Otherwise, the routines below do it the hard way. (The performance cost - * is not all that great, because these routines aren't very heavily used.) - */ - -#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ -#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) -#define FMEMZERO(target,size) MEMZERO(target,size) -#else /* 80x86 case, define if we can */ -#ifdef USE_FMEM -#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) -#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) -#endif -#endif - - -GLOBAL(void) -jcopy_sample_rows (JSAMPARRAY input_array, int source_row, - JSAMPARRAY output_array, int dest_row, - int num_rows, JDIMENSION num_cols) -/* Copy some rows of samples from one place to another. - * num_rows rows are copied from input_array[source_row++] - * to output_array[dest_row++]; these areas may overlap for duplication. - * The source and destination arrays must be at least as wide as num_cols. - */ -{ - register JSAMPROW inptr, outptr; -#ifdef FMEMCOPY - register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); -#else - register JDIMENSION count; -#endif - register int row; - - input_array += source_row; - output_array += dest_row; - - for (row = num_rows; row > 0; row--) { - inptr = *input_array++; - outptr = *output_array++; -#ifdef FMEMCOPY - FMEMCOPY(outptr, inptr, count); -#else - for (count = num_cols; count > 0; count--) - *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ -#endif - } -} - - -GLOBAL(void) -jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, - JDIMENSION num_blocks) -/* Copy a row of coefficient blocks from one place to another. */ -{ -#ifdef FMEMCOPY - FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); -#else - register JCOEFPTR inptr, outptr; - register long count; - - inptr = (JCOEFPTR) input_row; - outptr = (JCOEFPTR) output_row; - for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { - *outptr++ = *inptr++; - } -#endif -} - - -GLOBAL(void) -jzero_far (void FAR * target, size_t bytestozero) -/* Zero out a chunk of FAR memory. */ -/* This might be sample-array data, block-array data, or alloc_large data. */ -{ -#ifdef FMEMZERO - FMEMZERO(target, bytestozero); -#else - register char FAR * ptr = (char FAR *) target; - register size_t count; - - for (count = bytestozero; count > 0; count--) { - *ptr++ = 0; - } -#endif -} diff --git a/libjpegtwrp/jversion.h b/libjpegtwrp/jversion.h deleted file mode 100644 index 6472c58d3..000000000 --- a/libjpegtwrp/jversion.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * jversion.h - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains software version identification. - */ - - -#define JVERSION "6b 27-Mar-1998" - -#define JCOPYRIGHT "Copyright (C) 1998, Thomas G. Lane" diff --git a/libjpegtwrp/libjpeg.doc b/libjpegtwrp/libjpeg.doc deleted file mode 100644 index 689b206c0..000000000 --- a/libjpegtwrp/libjpeg.doc +++ /dev/null @@ -1,3006 +0,0 @@ -USING THE IJG JPEG LIBRARY - -Copyright (C) 1994-1998, Thomas G. Lane. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -This file describes how to use the IJG JPEG library within an application -program. Read it if you want to write a program that uses the library. - -The file example.c provides heavily commented skeleton code for calling the -JPEG library. Also see jpeglib.h (the include file to be used by application -programs) for full details about data structures and function parameter lists. -The library source code, of course, is the ultimate reference. - -Note that there have been *major* changes from the application interface -presented by IJG version 4 and earlier versions. The old design had several -inherent limitations, and it had accumulated a lot of cruft as we added -features while trying to minimize application-interface changes. We have -sacrificed backward compatibility in the version 5 rewrite, but we think the -improvements justify this. - - -TABLE OF CONTENTS ------------------ - -Overview: - Functions provided by the library - Outline of typical usage -Basic library usage: - Data formats - Compression details - Decompression details - Mechanics of usage: include files, linking, etc -Advanced features: - Compression parameter selection - Decompression parameter selection - Special color spaces - Error handling - Compressed data handling (source and destination managers) - I/O suspension - Progressive JPEG support - Buffered-image mode - Abbreviated datastreams and multiple images - Special markers - Raw (downsampled) image data - Really raw data: DCT coefficients - Progress monitoring - Memory management - Memory usage - Library compile-time options - Portability considerations - Notes for MS-DOS implementors - -You should read at least the overview and basic usage sections before trying -to program with the library. The sections on advanced features can be read -if and when you need them. - - -OVERVIEW -======== - -Functions provided by the library ---------------------------------- - -The IJG JPEG library provides C code to read and write JPEG-compressed image -files. The surrounding application program receives or supplies image data a -scanline at a time, using a straightforward uncompressed image format. All -details of color conversion and other preprocessing/postprocessing can be -handled by the library. - -The library includes a substantial amount of code that is not covered by the -JPEG standard but is necessary for typical applications of JPEG. These -functions preprocess the image before JPEG compression or postprocess it after -decompression. They include colorspace conversion, downsampling/upsampling, -and color quantization. The application indirectly selects use of this code -by specifying the format in which it wishes to supply or receive image data. -For example, if colormapped output is requested, then the decompression -library automatically invokes color quantization. - -A wide range of quality vs. speed tradeoffs are possible in JPEG processing, -and even more so in decompression postprocessing. The decompression library -provides multiple implementations that cover most of the useful tradeoffs, -ranging from very-high-quality down to fast-preview operation. On the -compression side we have generally not provided low-quality choices, since -compression is normally less time-critical. It should be understood that the -low-quality modes may not meet the JPEG standard's accuracy requirements; -nonetheless, they are useful for viewers. - -A word about functions *not* provided by the library. We handle a subset of -the ISO JPEG standard; most baseline, extended-sequential, and progressive -JPEG processes are supported. (Our subset includes all features now in common -use.) Unsupported ISO options include: - * Hierarchical storage - * Lossless JPEG - * Arithmetic entropy coding (unsupported for legal reasons) - * DNL marker - * Nonintegral subsampling ratios -We support both 8- and 12-bit data precision, but this is a compile-time -choice rather than a run-time choice; hence it is difficult to use both -precisions in a single application. - -By itself, the library handles only interchange JPEG datastreams --- in -particular the widely used JFIF file format. The library can be used by -surrounding code to process interchange or abbreviated JPEG datastreams that -are embedded in more complex file formats. (For example, this library is -used by the free LIBTIFF library to support JPEG compression in TIFF.) - - -Outline of typical usage ------------------------- - -The rough outline of a JPEG compression operation is: - - Allocate and initialize a JPEG compression object - Specify the destination for the compressed data (eg, a file) - Set parameters for compression, including image size & colorspace - jpeg_start_compress(...); - while (scan lines remain to be written) - jpeg_write_scanlines(...); - jpeg_finish_compress(...); - Release the JPEG compression object - -A JPEG compression object holds parameters and working state for the JPEG -library. We make creation/destruction of the object separate from starting -or finishing compression of an image; the same object can be re-used for a -series of image compression operations. This makes it easy to re-use the -same parameter settings for a sequence of images. Re-use of a JPEG object -also has important implications for processing abbreviated JPEG datastreams, -as discussed later. - -The image data to be compressed is supplied to jpeg_write_scanlines() from -in-memory buffers. If the application is doing file-to-file compression, -reading image data from the source file is the application's responsibility. -The library emits compressed data by calling a "data destination manager", -which typically will write the data into a file; but the application can -provide its own destination manager to do something else. - -Similarly, the rough outline of a JPEG decompression operation is: - - Allocate and initialize a JPEG decompression object - Specify the source of the compressed data (eg, a file) - Call jpeg_read_header() to obtain image info - Set parameters for decompression - jpeg_start_decompress(...); - while (scan lines remain to be read) - jpeg_read_scanlines(...); - jpeg_finish_decompress(...); - Release the JPEG decompression object - -This is comparable to the compression outline except that reading the -datastream header is a separate step. This is helpful because information -about the image's size, colorspace, etc is available when the application -selects decompression parameters. For example, the application can choose an -output scaling ratio that will fit the image into the available screen size. - -The decompression library obtains compressed data by calling a data source -manager, which typically will read the data from a file; but other behaviors -can be obtained with a custom source manager. Decompressed data is delivered -into in-memory buffers passed to jpeg_read_scanlines(). - -It is possible to abort an incomplete compression or decompression operation -by calling jpeg_abort(); or, if you do not need to retain the JPEG object, -simply release it by calling jpeg_destroy(). - -JPEG compression and decompression objects are two separate struct types. -However, they share some common fields, and certain routines such as -jpeg_destroy() can work on either type of object. - -The JPEG library has no static variables: all state is in the compression -or decompression object. Therefore it is possible to process multiple -compression and decompression operations concurrently, using multiple JPEG -objects. - -Both compression and decompression can be done in an incremental memory-to- -memory fashion, if suitable source/destination managers are used. See the -section on "I/O suspension" for more details. - - -BASIC LIBRARY USAGE -=================== - -Data formats ------------- - -Before diving into procedural details, it is helpful to understand the -image data format that the JPEG library expects or returns. - -The standard input image format is a rectangular array of pixels, with each -pixel having the same number of "component" or "sample" values (color -channels). You must specify how many components there are and the colorspace -interpretation of the components. Most applications will use RGB data -(three components per pixel) or grayscale data (one component per pixel). -PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE. -A remarkable number of people manage to miss this, only to find that their -programs don't work with grayscale JPEG files. - -There is no provision for colormapped input. JPEG files are always full-color -or full grayscale (or sometimes another colorspace such as CMYK). You can -feed in a colormapped image by expanding it to full-color format. However -JPEG often doesn't work very well with source data that has been colormapped, -because of dithering noise. This is discussed in more detail in the JPEG FAQ -and the other references mentioned in the README file. - -Pixels are stored by scanlines, with each scanline running from left to -right. The component values for each pixel are adjacent in the row; for -example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an -array of data type JSAMPLE --- which is typically "unsigned char", unless -you've changed jmorecfg.h. (You can also change the RGB pixel layout, say -to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in -that file before doing so.) - -A 2-D array of pixels is formed by making a list of pointers to the starts of -scanlines; so the scanlines need not be physically adjacent in memory. Even -if you process just one scanline at a time, you must make a one-element -pointer array to conform to this structure. Pointers to JSAMPLE rows are of -type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY. - -The library accepts or supplies one or more complete scanlines per call. -It is not possible to process part of a row at a time. Scanlines are always -processed top-to-bottom. You can process an entire image in one call if you -have it all in memory, but usually it's simplest to process one scanline at -a time. - -For best results, source data values should have the precision specified by -BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress -data that's only 6 bits/channel, you should left-justify each value in a -byte before passing it to the compressor. If you need to compress data -that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12. -(See "Library compile-time options", later.) - - -The data format returned by the decompressor is the same in all details, -except that colormapped output is supported. (Again, a JPEG file is never -colormapped. But you can ask the decompressor to perform on-the-fly color -quantization to deliver colormapped output.) If you request colormapped -output then the returned data array contains a single JSAMPLE per pixel; -its value is an index into a color map. The color map is represented as -a 2-D JSAMPARRAY in which each row holds the values of one color component, -that is, colormap[i][j] is the value of the i'th color component for pixel -value (map index) j. Note that since the colormap indexes are stored in -JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE -(ie, at most 256 colors for an 8-bit JPEG library). - - -Compression details -------------------- - -Here we revisit the JPEG compression outline given in the overview. - -1. Allocate and initialize a JPEG compression object. - -A JPEG compression object is a "struct jpeg_compress_struct". (It also has -a bunch of subsidiary structures which are allocated via malloc(), but the -application doesn't control those directly.) This struct can be just a local -variable in the calling routine, if a single routine is going to execute the -whole JPEG compression sequence. Otherwise it can be static or allocated -from malloc(). - -You will also need a structure representing a JPEG error handler. The part -of this that the library cares about is a "struct jpeg_error_mgr". If you -are providing your own error handler, you'll typically want to embed the -jpeg_error_mgr struct in a larger structure; this is discussed later under -"Error handling". For now we'll assume you are just using the default error -handler. The default error handler will print JPEG error/warning messages -on stderr, and it will call exit() if a fatal error occurs. - -You must initialize the error handler structure, store a pointer to it into -the JPEG object's "err" field, and then call jpeg_create_compress() to -initialize the rest of the JPEG object. - -Typical code for this step, if you are using the default error handler, is - - struct jpeg_compress_struct cinfo; - struct jpeg_error_mgr jerr; - ... - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_compress(&cinfo); - -jpeg_create_compress allocates a small amount of memory, so it could fail -if you are out of memory. In that case it will exit via the error handler; -that's why the error handler must be initialized first. - - -2. Specify the destination for the compressed data (eg, a file). - -As previously mentioned, the JPEG library delivers compressed data to a -"data destination" module. The library includes one data destination -module which knows how to write to a stdio stream. You can use your own -destination module if you want to do something else, as discussed later. - -If you use the standard destination module, you must open the target stdio -stream beforehand. Typical code for this step looks like: - - FILE * outfile; - ... - if ((outfile = fopen(filename, "wb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - exit(1); - } - jpeg_stdio_dest(&cinfo, outfile); - -where the last line invokes the standard destination module. - -WARNING: it is critical that the binary compressed data be delivered to the -output file unchanged. On non-Unix systems the stdio library may perform -newline translation or otherwise corrupt binary data. To suppress this -behavior, you may need to use a "b" option to fopen (as shown above), or use -setmode() or another routine to put the stdio stream in binary mode. See -cjpeg.c and djpeg.c for code that has been found to work on many systems. - -You can select the data destination after setting other parameters (step 3), -if that's more convenient. You may not change the destination between -calling jpeg_start_compress() and jpeg_finish_compress(). - - -3. Set parameters for compression, including image size & colorspace. - -You must supply information about the source image by setting the following -fields in the JPEG object (cinfo structure): - - image_width Width of image, in pixels - image_height Height of image, in pixels - input_components Number of color channels (samples per pixel) - in_color_space Color space of source image - -The image dimensions are, hopefully, obvious. JPEG supports image dimensions -of 1 to 64K pixels in either direction. The input color space is typically -RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special -color spaces", later, for more info.) The in_color_space field must be -assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or -JCS_GRAYSCALE. - -JPEG has a large number of compression parameters that determine how the -image is encoded. Most applications don't need or want to know about all -these parameters. You can set all the parameters to reasonable defaults by -calling jpeg_set_defaults(); then, if there are particular values you want -to change, you can do so after that. The "Compression parameter selection" -section tells about all the parameters. - -You must set in_color_space correctly before calling jpeg_set_defaults(), -because the defaults depend on the source image colorspace. However the -other three source image parameters need not be valid until you call -jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more -than once, if that happens to be convenient. - -Typical code for a 24-bit RGB source image is - - cinfo.image_width = Width; /* image width and height, in pixels */ - cinfo.image_height = Height; - cinfo.input_components = 3; /* # of color components per pixel */ - cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ - - jpeg_set_defaults(&cinfo); - /* Make optional parameter settings here */ - - -4. jpeg_start_compress(...); - -After you have established the data destination and set all the necessary -source image info and other parameters, call jpeg_start_compress() to begin -a compression cycle. This will initialize internal state, allocate working -storage, and emit the first few bytes of the JPEG datastream header. - -Typical code: - - jpeg_start_compress(&cinfo, TRUE); - -The "TRUE" parameter ensures that a complete JPEG interchange datastream -will be written. This is appropriate in most cases. If you think you might -want to use an abbreviated datastream, read the section on abbreviated -datastreams, below. - -Once you have called jpeg_start_compress(), you may not alter any JPEG -parameters or other fields of the JPEG object until you have completed -the compression cycle. - - -5. while (scan lines remain to be written) - jpeg_write_scanlines(...); - -Now write all the required image data by calling jpeg_write_scanlines() -one or more times. You can pass one or more scanlines in each call, up -to the total image height. In most applications it is convenient to pass -just one or a few scanlines at a time. The expected format for the passed -data is discussed under "Data formats", above. - -Image data should be written in top-to-bottom scanline order. The JPEG spec -contains some weasel wording about how top and bottom are application-defined -terms (a curious interpretation of the English language...) but if you want -your files to be compatible with everyone else's, you WILL use top-to-bottom -order. If the source data must be read in bottom-to-top order, you can use -the JPEG library's virtual array mechanism to invert the data efficiently. -Examples of this can be found in the sample application cjpeg. - -The library maintains a count of the number of scanlines written so far -in the next_scanline field of the JPEG object. Usually you can just use -this variable as the loop counter, so that the loop test looks like -"while (cinfo.next_scanline < cinfo.image_height)". - -Code for this step depends heavily on the way that you store the source data. -example.c shows the following code for the case of a full-size 2-D source -array containing 3-byte RGB pixels: - - JSAMPROW row_pointer[1]; /* pointer to a single row */ - int row_stride; /* physical row width in buffer */ - - row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ - - while (cinfo.next_scanline < cinfo.image_height) { - row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; - jpeg_write_scanlines(&cinfo, row_pointer, 1); - } - -jpeg_write_scanlines() returns the number of scanlines actually written. -This will normally be equal to the number passed in, so you can usually -ignore the return value. It is different in just two cases: - * If you try to write more scanlines than the declared image height, - the additional scanlines are ignored. - * If you use a suspending data destination manager, output buffer overrun - will cause the compressor to return before accepting all the passed lines. - This feature is discussed under "I/O suspension", below. The normal - stdio destination manager will NOT cause this to happen. -In any case, the return value is the same as the change in the value of -next_scanline. - - -6. jpeg_finish_compress(...); - -After all the image data has been written, call jpeg_finish_compress() to -complete the compression cycle. This step is ESSENTIAL to ensure that the -last bufferload of data is written to the data destination. -jpeg_finish_compress() also releases working memory associated with the JPEG -object. - -Typical code: - - jpeg_finish_compress(&cinfo); - -If using the stdio destination manager, don't forget to close the output -stdio stream (if necessary) afterwards. - -If you have requested a multi-pass operating mode, such as Huffman code -optimization, jpeg_finish_compress() will perform the additional passes using -data buffered by the first pass. In this case jpeg_finish_compress() may take -quite a while to complete. With the default compression parameters, this will -not happen. - -It is an error to call jpeg_finish_compress() before writing the necessary -total number of scanlines. If you wish to abort compression, call -jpeg_abort() as discussed below. - -After completing a compression cycle, you may dispose of the JPEG object -as discussed next, or you may use it to compress another image. In that case -return to step 2, 3, or 4 as appropriate. If you do not change the -destination manager, the new datastream will be written to the same target. -If you do not change any JPEG parameters, the new datastream will be written -with the same parameters as before. Note that you can change the input image -dimensions freely between cycles, but if you change the input colorspace, you -should call jpeg_set_defaults() to adjust for the new colorspace; and then -you'll need to repeat all of step 3. - - -7. Release the JPEG compression object. - -When you are done with a JPEG compression object, destroy it by calling -jpeg_destroy_compress(). This will free all subsidiary memory (regardless of -the previous state of the object). Or you can call jpeg_destroy(), which -works for either compression or decompression objects --- this may be more -convenient if you are sharing code between compression and decompression -cases. (Actually, these routines are equivalent except for the declared type -of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy() -should be passed a j_common_ptr.) - -If you allocated the jpeg_compress_struct structure from malloc(), freeing -it is your responsibility --- jpeg_destroy() won't. Ditto for the error -handler structure. - -Typical code: - - jpeg_destroy_compress(&cinfo); - - -8. Aborting. - -If you decide to abort a compression cycle before finishing, you can clean up -in either of two ways: - -* If you don't need the JPEG object any more, just call - jpeg_destroy_compress() or jpeg_destroy() to release memory. This is - legitimate at any point after calling jpeg_create_compress() --- in fact, - it's safe even if jpeg_create_compress() fails. - -* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call - jpeg_abort() which works on both compression and decompression objects. - This will return the object to an idle state, releasing any working memory. - jpeg_abort() is allowed at any time after successful object creation. - -Note that cleaning up the data destination, if required, is your -responsibility; neither of these routines will call term_destination(). -(See "Compressed data handling", below, for more about that.) - -jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG -object that has reported an error by calling error_exit (see "Error handling" -for more info). The internal state of such an object is likely to be out of -whack. Either of these two routines will return the object to a known state. - - -Decompression details ---------------------- - -Here we revisit the JPEG decompression outline given in the overview. - -1. Allocate and initialize a JPEG decompression object. - -This is just like initialization for compression, as discussed above, -except that the object is a "struct jpeg_decompress_struct" and you -call jpeg_create_decompress(). Error handling is exactly the same. - -Typical code: - - struct jpeg_decompress_struct cinfo; - struct jpeg_error_mgr jerr; - ... - cinfo.err = jpeg_std_error(&jerr); - jpeg_create_decompress(&cinfo); - -(Both here and in the IJG code, we usually use variable name "cinfo" for -both compression and decompression objects.) - - -2. Specify the source of the compressed data (eg, a file). - -As previously mentioned, the JPEG library reads compressed data from a "data -source" module. The library includes one data source module which knows how -to read from a stdio stream. You can use your own source module if you want -to do something else, as discussed later. - -If you use the standard source module, you must open the source stdio stream -beforehand. Typical code for this step looks like: - - FILE * infile; - ... - if ((infile = fopen(filename, "rb")) == NULL) { - fprintf(stderr, "can't open %s\n", filename); - exit(1); - } - jpeg_stdio_src(&cinfo, infile); - -where the last line invokes the standard source module. - -WARNING: it is critical that the binary compressed data be read unchanged. -On non-Unix systems the stdio library may perform newline translation or -otherwise corrupt binary data. To suppress this behavior, you may need to use -a "b" option to fopen (as shown above), or use setmode() or another routine to -put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that -has been found to work on many systems. - -You may not change the data source between calling jpeg_read_header() and -jpeg_finish_decompress(). If you wish to read a series of JPEG images from -a single source file, you should repeat the jpeg_read_header() to -jpeg_finish_decompress() sequence without reinitializing either the JPEG -object or the data source module; this prevents buffered input data from -being discarded. - - -3. Call jpeg_read_header() to obtain image info. - -Typical code for this step is just - - jpeg_read_header(&cinfo, TRUE); - -This will read the source datastream header markers, up to the beginning -of the compressed data proper. On return, the image dimensions and other -info have been stored in the JPEG object. The application may wish to -consult this information before selecting decompression parameters. - -More complex code is necessary if - * A suspending data source is used --- in that case jpeg_read_header() - may return before it has read all the header data. See "I/O suspension", - below. The normal stdio source manager will NOT cause this to happen. - * Abbreviated JPEG files are to be processed --- see the section on - abbreviated datastreams. Standard applications that deal only in - interchange JPEG files need not be concerned with this case either. - -It is permissible to stop at this point if you just wanted to find out the -image dimensions and other header info for a JPEG file. In that case, -call jpeg_destroy() when you are done with the JPEG object, or call -jpeg_abort() to return it to an idle state before selecting a new data -source and reading another header. - - -4. Set parameters for decompression. - -jpeg_read_header() sets appropriate default decompression parameters based on -the properties of the image (in particular, its colorspace). However, you -may well want to alter these defaults before beginning the decompression. -For example, the default is to produce full color output from a color file. -If you want colormapped output you must ask for it. Other options allow the -returned image to be scaled and allow various speed/quality tradeoffs to be -selected. "Decompression parameter selection", below, gives details. - -If the defaults are appropriate, nothing need be done at this step. - -Note that all default values are set by each call to jpeg_read_header(). -If you reuse a decompression object, you cannot expect your parameter -settings to be preserved across cycles, as you can for compression. -You must set desired parameter values each time. - - -5. jpeg_start_decompress(...); - -Once the parameter values are satisfactory, call jpeg_start_decompress() to -begin decompression. This will initialize internal state, allocate working -memory, and prepare for returning data. - -Typical code is just - - jpeg_start_decompress(&cinfo); - -If you have requested a multi-pass operating mode, such as 2-pass color -quantization, jpeg_start_decompress() will do everything needed before data -output can begin. In this case jpeg_start_decompress() may take quite a while -to complete. With a single-scan (non progressive) JPEG file and default -decompression parameters, this will not happen; jpeg_start_decompress() will -return quickly. - -After this call, the final output image dimensions, including any requested -scaling, are available in the JPEG object; so is the selected colormap, if -colormapped output has been requested. Useful fields include - - output_width image width and height, as scaled - output_height - out_color_components # of color components in out_color_space - output_components # of color components returned per pixel - colormap the selected colormap, if any - actual_number_of_colors number of entries in colormap - -output_components is 1 (a colormap index) when quantizing colors; otherwise it -equals out_color_components. It is the number of JSAMPLE values that will be -emitted per pixel in the output arrays. - -Typically you will need to allocate data buffers to hold the incoming image. -You will need output_width * output_components JSAMPLEs per scanline in your -output buffer, and a total of output_height scanlines will be returned. - -Note: if you are using the JPEG library's internal memory manager to allocate -data buffers (as djpeg does), then the manager's protocol requires that you -request large buffers *before* calling jpeg_start_decompress(). This is a -little tricky since the output_XXX fields are not normally valid then. You -can make them valid by calling jpeg_calc_output_dimensions() after setting the -relevant parameters (scaling, output color space, and quantization flag). - - -6. while (scan lines remain to be read) - jpeg_read_scanlines(...); - -Now you can read the decompressed image data by calling jpeg_read_scanlines() -one or more times. At each call, you pass in the maximum number of scanlines -to be read (ie, the height of your working buffer); jpeg_read_scanlines() -will return up to that many lines. The return value is the number of lines -actually read. The format of the returned data is discussed under "Data -formats", above. Don't forget that grayscale and color JPEGs will return -different data formats! - -Image data is returned in top-to-bottom scanline order. If you must write -out the image in bottom-to-top order, you can use the JPEG library's virtual -array mechanism to invert the data efficiently. Examples of this can be -found in the sample application djpeg. - -The library maintains a count of the number of scanlines returned so far -in the output_scanline field of the JPEG object. Usually you can just use -this variable as the loop counter, so that the loop test looks like -"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test -should NOT be against image_height, unless you never use scaling. The -image_height field is the height of the original unscaled image.) -The return value always equals the change in the value of output_scanline. - -If you don't use a suspending data source, it is safe to assume that -jpeg_read_scanlines() reads at least one scanline per call, until the -bottom of the image has been reached. - -If you use a buffer larger than one scanline, it is NOT safe to assume that -jpeg_read_scanlines() fills it. (The current implementation returns only a -few scanlines per call, no matter how large a buffer you pass.) So you must -always provide a loop that calls jpeg_read_scanlines() repeatedly until the -whole image has been read. - - -7. jpeg_finish_decompress(...); - -After all the image data has been read, call jpeg_finish_decompress() to -complete the decompression cycle. This causes working memory associated -with the JPEG object to be released. - -Typical code: - - jpeg_finish_decompress(&cinfo); - -If using the stdio source manager, don't forget to close the source stdio -stream if necessary. - -It is an error to call jpeg_finish_decompress() before reading the correct -total number of scanlines. If you wish to abort decompression, call -jpeg_abort() as discussed below. - -After completing a decompression cycle, you may dispose of the JPEG object as -discussed next, or you may use it to decompress another image. In that case -return to step 2 or 3 as appropriate. If you do not change the source -manager, the next image will be read from the same source. - - -8. Release the JPEG decompression object. - -When you are done with a JPEG decompression object, destroy it by calling -jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of -destroying compression objects applies here too. - -Typical code: - - jpeg_destroy_decompress(&cinfo); - - -9. Aborting. - -You can abort a decompression cycle by calling jpeg_destroy_decompress() or -jpeg_destroy() if you don't need the JPEG object any more, or -jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object. -The previous discussion of aborting compression cycles applies here too. - - -Mechanics of usage: include files, linking, etc ------------------------------------------------ - -Applications using the JPEG library should include the header file jpeglib.h -to obtain declarations of data types and routines. Before including -jpeglib.h, include system headers that define at least the typedefs FILE and -size_t. On ANSI-conforming systems, including is sufficient; on -older Unix systems, you may need to define size_t. - -If the application needs to refer to individual JPEG library error codes, also -include jerror.h to define those symbols. - -jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are -installing the JPEG header files in a system directory, you will want to -install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h. - -The most convenient way to include the JPEG code into your executable program -is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix -machines) and reference it at your link step. If you use only half of the -library (only compression or only decompression), only that much code will be -included from the library, unless your linker is hopelessly brain-damaged. -The supplied makefiles build libjpeg.a automatically (see install.doc). - -While you can build the JPEG library as a shared library if the whim strikes -you, we don't really recommend it. The trouble with shared libraries is that -at some point you'll probably try to substitute a new version of the library -without recompiling the calling applications. That generally doesn't work -because the parameter struct declarations usually change with each new -version. In other words, the library's API is *not* guaranteed binary -compatible across versions; we only try to ensure source-code compatibility. -(In hindsight, it might have been smarter to hide the parameter structs from -applications and introduce a ton of access functions instead. Too late now, -however.) - -On some systems your application may need to set up a signal handler to ensure -that temporary files are deleted if the program is interrupted. This is most -critical if you are on MS-DOS and use the jmemdos.c memory manager back end; -it will try to grab extended memory for temp files, and that space will NOT be -freed automatically. See cjpeg.c or djpeg.c for an example signal handler. - -It may be worth pointing out that the core JPEG library does not actually -require the stdio library: only the default source/destination managers and -error handler need it. You can use the library in a stdio-less environment -if you replace those modules and use jmemnobs.c (or another memory manager of -your own devising). More info about the minimum system library requirements -may be found in jinclude.h. - - -ADVANCED FEATURES -================= - -Compression parameter selection -------------------------------- - -This section describes all the optional parameters you can set for JPEG -compression, as well as the "helper" routines provided to assist in this -task. Proper setting of some parameters requires detailed understanding -of the JPEG standard; if you don't know what a parameter is for, it's best -not to mess with it! See REFERENCES in the README file for pointers to -more info about JPEG. - -It's a good idea to call jpeg_set_defaults() first, even if you plan to set -all the parameters; that way your code is more likely to work with future JPEG -libraries that have additional parameters. For the same reason, we recommend -you use a helper routine where one is provided, in preference to twiddling -cinfo fields directly. - -The helper routines are: - -jpeg_set_defaults (j_compress_ptr cinfo) - This routine sets all JPEG parameters to reasonable defaults, using - only the input image's color space (field in_color_space, which must - already be set in cinfo). Many applications will only need to use - this routine and perhaps jpeg_set_quality(). - -jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) - Sets the JPEG file's colorspace (field jpeg_color_space) as specified, - and sets other color-space-dependent parameters appropriately. See - "Special color spaces", below, before using this. A large number of - parameters, including all per-component parameters, are set by this - routine; if you want to twiddle individual parameters you should call - jpeg_set_colorspace() before rather than after. - -jpeg_default_colorspace (j_compress_ptr cinfo) - Selects an appropriate JPEG colorspace based on cinfo->in_color_space, - and calls jpeg_set_colorspace(). This is actually a subroutine of - jpeg_set_defaults(). It's broken out in case you want to change - just the colorspace-dependent JPEG parameters. - -jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) - Constructs JPEG quantization tables appropriate for the indicated - quality setting. The quality value is expressed on the 0..100 scale - recommended by IJG (cjpeg's "-quality" switch uses this routine). - Note that the exact mapping from quality values to tables may change - in future IJG releases as more is learned about DCT quantization. - If the force_baseline parameter is TRUE, then the quantization table - entries are constrained to the range 1..255 for full JPEG baseline - compatibility. In the current implementation, this only makes a - difference for quality settings below 25, and it effectively prevents - very small/low quality files from being generated. The IJG decoder - is capable of reading the non-baseline files generated at low quality - settings when force_baseline is FALSE, but other decoders may not be. - -jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, - boolean force_baseline) - Same as jpeg_set_quality() except that the generated tables are the - sample tables given in the JPEC spec section K.1, multiplied by the - specified scale factor (which is expressed as a percentage; thus - scale_factor = 100 reproduces the spec's tables). Note that larger - scale factors give lower quality. This entry point is useful for - conforming to the Adobe PostScript DCT conventions, but we do not - recommend linear scaling as a user-visible quality scale otherwise. - force_baseline again constrains the computed table entries to 1..255. - -int jpeg_quality_scaling (int quality) - Converts a value on the IJG-recommended quality scale to a linear - scaling percentage. Note that this routine may change or go away - in future releases --- IJG may choose to adopt a scaling method that - can't be expressed as a simple scalar multiplier, in which case the - premise of this routine collapses. Caveat user. - -jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, boolean force_baseline) - Allows an arbitrary quantization table to be created. which_tbl - indicates which table slot to fill. basic_table points to an array - of 64 unsigned ints given in normal array order. These values are - multiplied by scale_factor/100 and then clamped to the range 1..65535 - (or to 1..255 if force_baseline is TRUE). - CAUTION: prior to library version 6a, jpeg_add_quant_table expected - the basic table to be given in JPEG zigzag order. If you need to - write code that works with either older or newer versions of this - routine, you must check the library version number. Something like - "#if JPEG_LIB_VERSION >= 61" is the right test. - -jpeg_simple_progression (j_compress_ptr cinfo) - Generates a default scan script for writing a progressive-JPEG file. - This is the recommended method of creating a progressive file, - unless you want to make a custom scan sequence. You must ensure that - the JPEG color space is set correctly before calling this routine. - - -Compression parameters (cinfo fields) include: - -J_DCT_METHOD dct_method - Selects the algorithm used for the DCT step. Choices are: - JDCT_ISLOW: slow but accurate integer algorithm - JDCT_IFAST: faster, less accurate integer method - JDCT_FLOAT: floating-point method - JDCT_DEFAULT: default method (normally JDCT_ISLOW) - JDCT_FASTEST: fastest method (normally JDCT_IFAST) - The FLOAT method is very slightly more accurate than the ISLOW method, - but may give different results on different machines due to varying - roundoff behavior. The integer methods should give the same results - on all machines. On machines with sufficiently fast FP hardware, the - floating-point method may also be the fastest. The IFAST method is - considerably less accurate than the other two; its use is not - recommended if high quality is a concern. JDCT_DEFAULT and - JDCT_FASTEST are macros configurable by each installation. - -J_COLOR_SPACE jpeg_color_space -int num_components - The JPEG color space and corresponding number of components; see - "Special color spaces", below, for more info. We recommend using - jpeg_set_color_space() if you want to change these. - -boolean optimize_coding - TRUE causes the compressor to compute optimal Huffman coding tables - for the image. This requires an extra pass over the data and - therefore costs a good deal of space and time. The default is - FALSE, which tells the compressor to use the supplied or default - Huffman tables. In most cases optimal tables save only a few percent - of file size compared to the default tables. Note that when this is - TRUE, you need not supply Huffman tables at all, and any you do - supply will be overwritten. - -unsigned int restart_interval -int restart_in_rows - To emit restart markers in the JPEG file, set one of these nonzero. - Set restart_interval to specify the exact interval in MCU blocks. - Set restart_in_rows to specify the interval in MCU rows. (If - restart_in_rows is not 0, then restart_interval is set after the - image width in MCUs is computed.) Defaults are zero (no restarts). - One restart marker per MCU row is often a good choice. - NOTE: the overhead of restart markers is higher in grayscale JPEG - files than in color files, and MUCH higher in progressive JPEGs. - If you use restarts, you may want to use larger intervals in those - cases. - -const jpeg_scan_info * scan_info -int num_scans - By default, scan_info is NULL; this causes the compressor to write a - single-scan sequential JPEG file. If not NULL, scan_info points to - an array of scan definition records of length num_scans. The - compressor will then write a JPEG file having one scan for each scan - definition record. This is used to generate noninterleaved or - progressive JPEG files. The library checks that the scan array - defines a valid JPEG scan sequence. (jpeg_simple_progression creates - a suitable scan definition array for progressive JPEG.) This is - discussed further under "Progressive JPEG support". - -int smoothing_factor - If non-zero, the input image is smoothed; the value should be 1 for - minimal smoothing to 100 for maximum smoothing. Consult jcsample.c - for details of the smoothing algorithm. The default is zero. - -boolean write_JFIF_header - If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and - jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space - (ie, YCbCr or grayscale) is selected, otherwise FALSE. - -UINT8 JFIF_major_version -UINT8 JFIF_minor_version - The version number to be written into the JFIF marker. - jpeg_set_defaults() initializes the version to 1.01 (major=minor=1). - You should set it to 1.02 (major=1, minor=2) if you plan to write - any JFIF 1.02 extension markers. - -UINT8 density_unit -UINT16 X_density -UINT16 Y_density - The resolution information to be written into the JFIF marker; - not used otherwise. density_unit may be 0 for unknown, - 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1 - indicating square pixels of unknown size. - -boolean write_Adobe_marker - If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and - jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK, - or YCCK is selected, otherwise FALSE. It is generally a bad idea - to set both write_JFIF_header and write_Adobe_marker. In fact, - you probably shouldn't change the default settings at all --- the - default behavior ensures that the JPEG file's color space can be - recognized by the decoder. - -JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS] - Pointers to coefficient quantization tables, one per table slot, - or NULL if no table is defined for a slot. Usually these should - be set via one of the above helper routines; jpeg_add_quant_table() - is general enough to define any quantization table. The other - routines will set up table slot 0 for luminance quality and table - slot 1 for chrominance. - -JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS] -JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS] - Pointers to Huffman coding tables, one per table slot, or NULL if - no table is defined for a slot. Slots 0 and 1 are filled with the - JPEG sample tables by jpeg_set_defaults(). If you need to allocate - more table structures, jpeg_alloc_huff_table() may be used. - Note that optimal Huffman tables can be computed for an image - by setting optimize_coding, as discussed above; there's seldom - any need to mess with providing your own Huffman tables. - -There are some additional cinfo fields which are not documented here -because you currently can't change them; for example, you can't set -arith_code TRUE because arithmetic coding is unsupported. - - -Per-component parameters are stored in the struct cinfo.comp_info[i] for -component number i. Note that components here refer to components of the -JPEG color space, *not* the source image color space. A suitably large -comp_info[] array is allocated by jpeg_set_defaults(); if you choose not -to use that routine, it's up to you to allocate the array. - -int component_id - The one-byte identifier code to be recorded in the JPEG file for - this component. For the standard color spaces, we recommend you - leave the default values alone. - -int h_samp_factor -int v_samp_factor - Horizontal and vertical sampling factors for the component; must - be 1..4 according to the JPEG standard. Note that larger sampling - factors indicate a higher-resolution component; many people find - this behavior quite unintuitive. The default values are 2,2 for - luminance components and 1,1 for chrominance components, except - for grayscale where 1,1 is used. - -int quant_tbl_no - Quantization table number for component. The default value is - 0 for luminance components and 1 for chrominance components. - -int dc_tbl_no -int ac_tbl_no - DC and AC entropy coding table numbers. The default values are - 0 for luminance components and 1 for chrominance components. - -int component_index - Must equal the component's index in comp_info[]. (Beginning in - release v6, the compressor library will fill this in automatically; - you don't have to.) - - -Decompression parameter selection ---------------------------------- - -Decompression parameter selection is somewhat simpler than compression -parameter selection, since all of the JPEG internal parameters are -recorded in the source file and need not be supplied by the application. -(Unless you are working with abbreviated files, in which case see -"Abbreviated datastreams", below.) Decompression parameters control -the postprocessing done on the image to deliver it in a format suitable -for the application's use. Many of the parameters control speed/quality -tradeoffs, in which faster decompression may be obtained at the price of -a poorer-quality image. The defaults select the highest quality (slowest) -processing. - -The following fields in the JPEG object are set by jpeg_read_header() and -may be useful to the application in choosing decompression parameters: - -JDIMENSION image_width Width and height of image -JDIMENSION image_height -int num_components Number of color components -J_COLOR_SPACE jpeg_color_space Colorspace of image -boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen - UINT8 JFIF_major_version Version information from JFIF marker - UINT8 JFIF_minor_version - UINT8 density_unit Resolution data from JFIF marker - UINT16 X_density - UINT16 Y_density -boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen - UINT8 Adobe_transform Color transform code from Adobe marker - -The JPEG color space, unfortunately, is something of a guess since the JPEG -standard proper does not provide a way to record it. In practice most files -adhere to the JFIF or Adobe conventions, and the decoder will recognize these -correctly. See "Special color spaces", below, for more info. - - -The decompression parameters that determine the basic properties of the -returned image are: - -J_COLOR_SPACE out_color_space - Output color space. jpeg_read_header() sets an appropriate default - based on jpeg_color_space; typically it will be RGB or grayscale. - The application can change this field to request output in a different - colorspace. For example, set it to JCS_GRAYSCALE to get grayscale - output from a color file. (This is useful for previewing: grayscale - output is faster than full color since the color components need not - be processed.) Note that not all possible color space transforms are - currently implemented; you may need to extend jdcolor.c if you want an - unusual conversion. - -unsigned int scale_num, scale_denom - Scale the image by the fraction scale_num/scale_denom. Default is - 1/1, or no scaling. Currently, the only supported scaling ratios - are 1/1, 1/2, 1/4, and 1/8. (The library design allows for arbitrary - scaling ratios but this is not likely to be implemented any time soon.) - Smaller scaling ratios permit significantly faster decoding since - fewer pixels need be processed and a simpler IDCT method can be used. - -boolean quantize_colors - If set TRUE, colormapped output will be delivered. Default is FALSE, - meaning that full-color output will be delivered. - -The next three parameters are relevant only if quantize_colors is TRUE. - -int desired_number_of_colors - Maximum number of colors to use in generating a library-supplied color - map (the actual number of colors is returned in a different field). - Default 256. Ignored when the application supplies its own color map. - -boolean two_pass_quantize - If TRUE, an extra pass over the image is made to select a custom color - map for the image. This usually looks a lot better than the one-size- - fits-all colormap that is used otherwise. Default is TRUE. Ignored - when the application supplies its own color map. - -J_DITHER_MODE dither_mode - Selects color dithering method. Supported values are: - JDITHER_NONE no dithering: fast, very low quality - JDITHER_ORDERED ordered dither: moderate speed and quality - JDITHER_FS Floyd-Steinberg dither: slow, high quality - Default is JDITHER_FS. (At present, ordered dither is implemented - only in the single-pass, standard-colormap case. If you ask for - ordered dither when two_pass_quantize is TRUE or when you supply - an external color map, you'll get F-S dithering.) - -When quantize_colors is TRUE, the target color map is described by the next -two fields. colormap is set to NULL by jpeg_read_header(). The application -can supply a color map by setting colormap non-NULL and setting -actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress() -selects a suitable color map and sets these two fields itself. -[Implementation restriction: at present, an externally supplied colormap is -only accepted for 3-component output color spaces.] - -JSAMPARRAY colormap - The color map, represented as a 2-D pixel array of out_color_components - rows and actual_number_of_colors columns. Ignored if not quantizing. - CAUTION: if the JPEG library creates its own colormap, the storage - pointed to by this field is released by jpeg_finish_decompress(). - Copy the colormap somewhere else first, if you want to save it. - -int actual_number_of_colors - The number of colors in the color map. - -Additional decompression parameters that the application may set include: - -J_DCT_METHOD dct_method - Selects the algorithm used for the DCT step. Choices are the same - as described above for compression. - -boolean do_fancy_upsampling - If TRUE, do careful upsampling of chroma components. If FALSE, - a faster but sloppier method is used. Default is TRUE. The visual - impact of the sloppier method is often very small. - -boolean do_block_smoothing - If TRUE, interblock smoothing is applied in early stages of decoding - progressive JPEG files; if FALSE, not. Default is TRUE. Early - progression stages look "fuzzy" with smoothing, "blocky" without. - In any case, block smoothing ceases to be applied after the first few - AC coefficients are known to full accuracy, so it is relevant only - when using buffered-image mode for progressive images. - -boolean enable_1pass_quant -boolean enable_external_quant -boolean enable_2pass_quant - These are significant only in buffered-image mode, which is - described in its own section below. - - -The output image dimensions are given by the following fields. These are -computed from the source image dimensions and the decompression parameters -by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions() -to obtain the values that will result from the current parameter settings. -This can be useful if you are trying to pick a scaling ratio that will get -close to a desired target size. It's also important if you are using the -JPEG library's memory manager to allocate output buffer space, because you -are supposed to request such buffers *before* jpeg_start_decompress(). - -JDIMENSION output_width Actual dimensions of output image. -JDIMENSION output_height -int out_color_components Number of color components in out_color_space. -int output_components Number of color components returned. -int rec_outbuf_height Recommended height of scanline buffer. - -When quantizing colors, output_components is 1, indicating a single color map -index per pixel. Otherwise it equals out_color_components. The output arrays -are required to be output_width * output_components JSAMPLEs wide. - -rec_outbuf_height is the recommended minimum height (in scanlines) of the -buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the -library will still work, but time will be wasted due to unnecessary data -copying. In high-quality modes, rec_outbuf_height is always 1, but some -faster, lower-quality modes set it to larger values (typically 2 to 4). -If you are going to ask for a high-speed processing mode, you may as well -go to the trouble of honoring rec_outbuf_height so as to avoid data copying. -(An output buffer larger than rec_outbuf_height lines is OK, but won't -provide any material speed improvement over that height.) - - -Special color spaces --------------------- - -The JPEG standard itself is "color blind" and doesn't specify any particular -color space. It is customary to convert color data to a luminance/chrominance -color space before compressing, since this permits greater compression. The -existing de-facto JPEG file format standards specify YCbCr or grayscale data -(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe). For special -applications such as multispectral images, other color spaces can be used, -but it must be understood that such files will be unportable. - -The JPEG library can handle the most common colorspace conversions (namely -RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown -color space, passing it through without conversion. If you deal extensively -with an unusual color space, you can easily extend the library to understand -additional color spaces and perform appropriate conversions. - -For compression, the source data's color space is specified by field -in_color_space. This is transformed to the JPEG file's color space given -by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color -space depending on in_color_space, but you can override this by calling -jpeg_set_colorspace(). Of course you must select a supported transformation. -jccolor.c currently supports the following transformations: - RGB => YCbCr - RGB => GRAYSCALE - YCbCr => GRAYSCALE - CMYK => YCCK -plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB, -YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN. - -The de-facto file format standards (JFIF and Adobe) specify APPn markers that -indicate the color space of the JPEG file. It is important to ensure that -these are written correctly, or omitted if the JPEG file's color space is not -one of the ones supported by the de-facto standards. jpeg_set_colorspace() -will set the compression parameters to include or omit the APPn markers -properly, so long as it is told the truth about the JPEG color space. -For example, if you are writing some random 3-component color space without -conversion, don't try to fake out the library by setting in_color_space and -jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. You may want to write an -APPn marker of your own devising to identify the colorspace --- see "Special -markers", below. - -When told that the color space is UNKNOWN, the library will default to using -luminance-quality compression parameters for all color components. You may -well want to change these parameters. See the source code for -jpeg_set_colorspace(), in jcparam.c, for details. - -For decompression, the JPEG file's color space is given in jpeg_color_space, -and this is transformed to the output color space out_color_space. -jpeg_read_header's setting of jpeg_color_space can be relied on if the file -conforms to JFIF or Adobe conventions, but otherwise it is no better than a -guess. If you know the JPEG file's color space for certain, you can override -jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also -selects a default output color space based on (its guess of) jpeg_color_space; -set out_color_space to override this. Again, you must select a supported -transformation. jdcolor.c currently supports - YCbCr => GRAYSCALE - YCbCr => RGB - GRAYSCALE => RGB - YCCK => CMYK -as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an -application can force grayscale JPEGs to look like color JPEGs if it only -wants to handle one case.) - -The two-pass color quantizer, jquant2.c, is specialized to handle RGB data -(it weights distances appropriately for RGB colors). You'll need to modify -the code if you want to use it for non-RGB output color spaces. Note that -jquant2.c is used to map to an application-supplied colormap as well as for -the normal two-pass colormap selection process. - -CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG -files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect. -This is arguably a bug in Photoshop, but if you need to work with Photoshop -CMYK files, you will have to deal with it in your application. We cannot -"fix" this in the library by inverting the data during the CMYK<=>YCCK -transform, because that would break other applications, notably Ghostscript. -Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK -data in the same inverted-YCCK representation used in bare JPEG files, but -the surrounding PostScript code performs an inversion using the PS image -operator. I am told that Photoshop 3.0 will write uninverted YCCK in -EPS/JPEG files, and will omit the PS-level inversion. (But the data -polarity used in bare JPEG files will not change in 3.0.) In either case, -the JPEG library must not invert the data itself, or else Ghostscript would -read these EPS files incorrectly. - - -Error handling --------------- - -When the default error handler is used, any error detected inside the JPEG -routines will cause a message to be printed on stderr, followed by exit(). -You can supply your own error handling routines to override this behavior -and to control the treatment of nonfatal warnings and trace/debug messages. -The file example.c illustrates the most common case, which is to have the -application regain control after an error rather than exiting. - -The JPEG library never writes any message directly; it always goes through -the error handling routines. Three classes of messages are recognized: - * Fatal errors: the library cannot continue. - * Warnings: the library can continue, but the data is corrupt, and a - damaged output image is likely to result. - * Trace/informational messages. These come with a trace level indicating - the importance of the message; you can control the verbosity of the - program by adjusting the maximum trace level that will be displayed. - -You may, if you wish, simply replace the entire JPEG error handling module -(jerror.c) with your own code. However, you can avoid code duplication by -only replacing some of the routines depending on the behavior you need. -This is accomplished by calling jpeg_std_error() as usual, but then overriding -some of the method pointers in the jpeg_error_mgr struct, as illustrated by -example.c. - -All of the error handling routines will receive a pointer to the JPEG object -(a j_common_ptr which points to either a jpeg_compress_struct or a -jpeg_decompress_struct; if you need to tell which, test the is_decompressor -field). This struct includes a pointer to the error manager struct in its -"err" field. Frequently, custom error handler routines will need to access -additional data which is not known to the JPEG library or the standard error -handler. The most convenient way to do this is to embed either the JPEG -object or the jpeg_error_mgr struct in a larger structure that contains -additional fields; then casting the passed pointer provides access to the -additional fields. Again, see example.c for one way to do it. (Beginning -with IJG version 6b, there is also a void pointer "client_data" in each -JPEG object, which the application can also use to find related data. -The library does not touch client_data at all.) - -The individual methods that you might wish to override are: - -error_exit (j_common_ptr cinfo) - Receives control for a fatal error. Information sufficient to - generate the error message has been stored in cinfo->err; call - output_message to display it. Control must NOT return to the caller; - generally this routine will exit() or longjmp() somewhere. - Typically you would override this routine to get rid of the exit() - default behavior. Note that if you continue processing, you should - clean up the JPEG object with jpeg_abort() or jpeg_destroy(). - -output_message (j_common_ptr cinfo) - Actual output of any JPEG message. Override this to send messages - somewhere other than stderr. Note that this method does not know - how to generate a message, only where to send it. - -format_message (j_common_ptr cinfo, char * buffer) - Constructs a readable error message string based on the error info - stored in cinfo->err. This method is called by output_message. Few - applications should need to override this method. One possible - reason for doing so is to implement dynamic switching of error message - language. - -emit_message (j_common_ptr cinfo, int msg_level) - Decide whether or not to emit a warning or trace message; if so, - calls output_message. The main reason for overriding this method - would be to abort on warnings. msg_level is -1 for warnings, - 0 and up for trace messages. - -Only error_exit() and emit_message() are called from the rest of the JPEG -library; the other two are internal to the error handler. - -The actual message texts are stored in an array of strings which is pointed to -by the field err->jpeg_message_table. The messages are numbered from 0 to -err->last_jpeg_message, and it is these code numbers that are used in the -JPEG library code. You could replace the message texts (for instance, with -messages in French or German) by changing the message table pointer. See -jerror.h for the default texts. CAUTION: this table will almost certainly -change or grow from one library version to the next. - -It may be useful for an application to add its own message texts that are -handled by the same mechanism. The error handler supports a second "add-on" -message table for this purpose. To define an addon table, set the pointer -err->addon_message_table and the message numbers err->first_addon_message and -err->last_addon_message. If you number the addon messages beginning at 1000 -or so, you won't have to worry about conflicts with the library's built-in -messages. See the sample applications cjpeg/djpeg for an example of using -addon messages (the addon messages are defined in cderror.h). - -Actual invocation of the error handler is done via macros defined in jerror.h: - ERREXITn(...) for fatal errors - WARNMSn(...) for corrupt-data warnings - TRACEMSn(...) for trace and informational messages. -These macros store the message code and any additional parameters into the -error handler struct, then invoke the error_exit() or emit_message() method. -The variants of each macro are for varying numbers of additional parameters. -The additional parameters are inserted into the generated message using -standard printf() format codes. - -See jerror.h and jerror.c for further details. - - -Compressed data handling (source and destination managers) ----------------------------------------------------------- - -The JPEG compression library sends its compressed data to a "destination -manager" module. The default destination manager just writes the data to a -stdio stream, but you can provide your own manager to do something else. -Similarly, the decompression library calls a "source manager" to obtain the -compressed data; you can provide your own source manager if you want the data -to come from somewhere other than a stdio stream. - -In both cases, compressed data is processed a bufferload at a time: the -destination or source manager provides a work buffer, and the library invokes -the manager only when the buffer is filled or emptied. (You could define a -one-character buffer to force the manager to be invoked for each byte, but -that would be rather inefficient.) The buffer's size and location are -controlled by the manager, not by the library. For example, if you desired to -decompress a JPEG datastream that was all in memory, you could just make the -buffer pointer and length point to the original data in memory. Then the -buffer-reload procedure would be invoked only if the decompressor ran off the -end of the datastream, which would indicate an erroneous datastream. - -The work buffer is defined as an array of datatype JOCTET, which is generally -"char" or "unsigned char". On a machine where char is not exactly 8 bits -wide, you must define JOCTET as a wider data type and then modify the data -source and destination modules to transcribe the work arrays into 8-bit units -on external storage. - -A data destination manager struct contains a pointer and count defining the -next byte to write in the work buffer and the remaining free space: - - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - -The library increments the pointer and decrements the count until the buffer -is filled. The manager's empty_output_buffer method must reset the pointer -and count. The manager is expected to remember the buffer's starting address -and total size in private fields not visible to the library. - -A data destination manager provides three methods: - -init_destination (j_compress_ptr cinfo) - Initialize destination. This is called by jpeg_start_compress() - before any data is actually written. It must initialize - next_output_byte and free_in_buffer. free_in_buffer must be - initialized to a positive value. - -empty_output_buffer (j_compress_ptr cinfo) - This is called whenever the buffer has filled (free_in_buffer - reaches zero). In typical applications, it should write out the - *entire* buffer (use the saved start address and buffer length; - ignore the current state of next_output_byte and free_in_buffer). - Then reset the pointer & count to the start of the buffer, and - return TRUE indicating that the buffer has been dumped. - free_in_buffer must be set to a positive value when TRUE is - returned. A FALSE return should only be used when I/O suspension is - desired (this operating mode is discussed in the next section). - -term_destination (j_compress_ptr cinfo) - Terminate destination --- called by jpeg_finish_compress() after all - data has been written. In most applications, this must flush any - data remaining in the buffer. Use either next_output_byte or - free_in_buffer to determine how much data is in the buffer. - -term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you -want the destination manager to be cleaned up during an abort, you must do it -yourself. - -You will also need code to create a jpeg_destination_mgr struct, fill in its -method pointers, and insert a pointer to the struct into the "dest" field of -the JPEG compression object. This can be done in-line in your setup code if -you like, but it's probably cleaner to provide a separate routine similar to -the jpeg_stdio_dest() routine of the supplied destination manager. - -Decompression source managers follow a parallel design, but with some -additional frammishes. The source manager struct contains a pointer and count -defining the next byte to read from the work buffer and the number of bytes -remaining: - - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - -The library increments the pointer and decrements the count until the buffer -is emptied. The manager's fill_input_buffer method must reset the pointer and -count. In most applications, the manager must remember the buffer's starting -address and total size in private fields not visible to the library. - -A data source manager provides five methods: - -init_source (j_decompress_ptr cinfo) - Initialize source. This is called by jpeg_read_header() before any - data is actually read. Unlike init_destination(), it may leave - bytes_in_buffer set to 0 (in which case a fill_input_buffer() call - will occur immediately). - -fill_input_buffer (j_decompress_ptr cinfo) - This is called whenever bytes_in_buffer has reached zero and more - data is wanted. In typical applications, it should read fresh data - into the buffer (ignoring the current state of next_input_byte and - bytes_in_buffer), reset the pointer & count to the start of the - buffer, and return TRUE indicating that the buffer has been reloaded. - It is not necessary to fill the buffer entirely, only to obtain at - least one more byte. bytes_in_buffer MUST be set to a positive value - if TRUE is returned. A FALSE return should only be used when I/O - suspension is desired (this mode is discussed in the next section). - -skip_input_data (j_decompress_ptr cinfo, long num_bytes) - Skip num_bytes worth of data. The buffer pointer and count should - be advanced over num_bytes input bytes, refilling the buffer as - needed. This is used to skip over a potentially large amount of - uninteresting data (such as an APPn marker). In some applications - it may be possible to optimize away the reading of the skipped data, - but it's not clear that being smart is worth much trouble; large - skips are uncommon. bytes_in_buffer may be zero on return. - A zero or negative skip count should be treated as a no-op. - -resync_to_restart (j_decompress_ptr cinfo, int desired) - This routine is called only when the decompressor has failed to find - a restart (RSTn) marker where one is expected. Its mission is to - find a suitable point for resuming decompression. For most - applications, we recommend that you just use the default resync - procedure, jpeg_resync_to_restart(). However, if you are able to back - up in the input data stream, or if you have a-priori knowledge about - the likely location of restart markers, you may be able to do better. - Read the read_restart_marker() and jpeg_resync_to_restart() routines - in jdmarker.c if you think you'd like to implement your own resync - procedure. - -term_source (j_decompress_ptr cinfo) - Terminate source --- called by jpeg_finish_decompress() after all - data has been read. Often a no-op. - -For both fill_input_buffer() and skip_input_data(), there is no such thing -as an EOF return. If the end of the file has been reached, the routine has -a choice of exiting via ERREXIT() or inserting fake data into the buffer. -In most cases, generating a warning message and inserting a fake EOI marker -is the best course of action --- this will allow the decompressor to output -however much of the image is there. In pathological cases, the decompressor -may swallow the EOI and again demand data ... just keep feeding it fake EOIs. -jdatasrc.c illustrates the recommended error recovery behavior. - -term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want -the source manager to be cleaned up during an abort, you must do it yourself. - -You will also need code to create a jpeg_source_mgr struct, fill in its method -pointers, and insert a pointer to the struct into the "src" field of the JPEG -decompression object. This can be done in-line in your setup code if you -like, but it's probably cleaner to provide a separate routine similar to the -jpeg_stdio_src() routine of the supplied source manager. - -For more information, consult the stdio source and destination managers -in jdatasrc.c and jdatadst.c. - - -I/O suspension --------------- - -Some applications need to use the JPEG library as an incremental memory-to- -memory filter: when the compressed data buffer is filled or emptied, they want -control to return to the outer loop, rather than expecting that the buffer can -be emptied or reloaded within the data source/destination manager subroutine. -The library supports this need by providing an "I/O suspension" mode, which we -describe in this section. - -The I/O suspension mode is not a panacea: nothing is guaranteed about the -maximum amount of time spent in any one call to the library, so it will not -eliminate response-time problems in single-threaded applications. If you -need guaranteed response time, we suggest you "bite the bullet" and implement -a real multi-tasking capability. - -To use I/O suspension, cooperation is needed between the calling application -and the data source or destination manager; you will always need a custom -source/destination manager. (Please read the previous section if you haven't -already.) The basic idea is that the empty_output_buffer() or -fill_input_buffer() routine is a no-op, merely returning FALSE to indicate -that it has done nothing. Upon seeing this, the JPEG library suspends -operation and returns to its caller. The surrounding application is -responsible for emptying or refilling the work buffer before calling the -JPEG library again. - -Compression suspension: - -For compression suspension, use an empty_output_buffer() routine that returns -FALSE; typically it will not do anything else. This will cause the -compressor to return to the caller of jpeg_write_scanlines(), with the return -value indicating that not all the supplied scanlines have been accepted. -The application must make more room in the output buffer, adjust the output -buffer pointer/count appropriately, and then call jpeg_write_scanlines() -again, pointing to the first unconsumed scanline. - -When forced to suspend, the compressor will backtrack to a convenient stopping -point (usually the start of the current MCU); it will regenerate some output -data when restarted. Therefore, although empty_output_buffer() is only -called when the buffer is filled, you should NOT write out the entire buffer -after a suspension. Write only the data up to the current position of -next_output_byte/free_in_buffer. The data beyond that point will be -regenerated after resumption. - -Because of the backtracking behavior, a good-size output buffer is essential -for efficiency; you don't want the compressor to suspend often. (In fact, an -overly small buffer could lead to infinite looping, if a single MCU required -more data than would fit in the buffer.) We recommend a buffer of at least -several Kbytes. You may want to insert explicit code to ensure that you don't -call jpeg_write_scanlines() unless there is a reasonable amount of space in -the output buffer; in other words, flush the buffer before trying to compress -more data. - -The compressor does not allow suspension while it is trying to write JPEG -markers at the beginning and end of the file. This means that: - * At the beginning of a compression operation, there must be enough free - space in the output buffer to hold the header markers (typically 600 or - so bytes). The recommended buffer size is bigger than this anyway, so - this is not a problem as long as you start with an empty buffer. However, - this restriction might catch you if you insert large special markers, such - as a JFIF thumbnail image, without flushing the buffer afterwards. - * When you call jpeg_finish_compress(), there must be enough space in the - output buffer to emit any buffered data and the final EOI marker. In the - current implementation, half a dozen bytes should suffice for this, but - for safety's sake we recommend ensuring that at least 100 bytes are free - before calling jpeg_finish_compress(). - -A more significant restriction is that jpeg_finish_compress() cannot suspend. -This means you cannot use suspension with multi-pass operating modes, namely -Huffman code optimization and multiple-scan output. Those modes write the -whole file during jpeg_finish_compress(), which will certainly result in -buffer overrun. (Note that this restriction applies only to compression, -not decompression. The decompressor supports input suspension in all of its -operating modes.) - -Decompression suspension: - -For decompression suspension, use a fill_input_buffer() routine that simply -returns FALSE (except perhaps during error recovery, as discussed below). -This will cause the decompressor to return to its caller with an indication -that suspension has occurred. This can happen at four places: - * jpeg_read_header(): will return JPEG_SUSPENDED. - * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE. - * jpeg_read_scanlines(): will return the number of scanlines already - completed (possibly 0). - * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE. -The surrounding application must recognize these cases, load more data into -the input buffer, and repeat the call. In the case of jpeg_read_scanlines(), -increment the passed pointers past any scanlines successfully read. - -Just as with compression, the decompressor will typically backtrack to a -convenient restart point before suspending. When fill_input_buffer() is -called, next_input_byte/bytes_in_buffer point to the current restart point, -which is where the decompressor will backtrack to if FALSE is returned. -The data beyond that position must NOT be discarded if you suspend; it needs -to be re-read upon resumption. In most implementations, you'll need to shift -this data down to the start of your work buffer and then load more data after -it. Again, this behavior means that a several-Kbyte work buffer is essential -for decent performance; furthermore, you should load a reasonable amount of -new data before resuming decompression. (If you loaded, say, only one new -byte each time around, you could waste a LOT of cycles.) - -The skip_input_data() source manager routine requires special care in a -suspension scenario. This routine is NOT granted the ability to suspend the -decompressor; it can decrement bytes_in_buffer to zero, but no more. If the -requested skip distance exceeds the amount of data currently in the input -buffer, then skip_input_data() must set bytes_in_buffer to zero and record the -additional skip distance somewhere else. The decompressor will immediately -call fill_input_buffer(), which should return FALSE, which will cause a -suspension return. The surrounding application must then arrange to discard -the recorded number of bytes before it resumes loading the input buffer. -(Yes, this design is rather baroque, but it avoids complexity in the far more -common case where a non-suspending source manager is used.) - -If the input data has been exhausted, we recommend that you emit a warning -and insert dummy EOI markers just as a non-suspending data source manager -would do. This can be handled either in the surrounding application logic or -within fill_input_buffer(); the latter is probably more efficient. If -fill_input_buffer() knows that no more data is available, it can set the -pointer/count to point to a dummy EOI marker and then return TRUE just as -though it had read more data in a non-suspending situation. - -The decompressor does not attempt to suspend within standard JPEG markers; -instead it will backtrack to the start of the marker and reprocess the whole -marker next time. Hence the input buffer must be large enough to hold the -longest standard marker in the file. Standard JPEG markers should normally -not exceed a few hundred bytes each (DHT tables are typically the longest). -We recommend at least a 2K buffer for performance reasons, which is much -larger than any correct marker is likely to be. For robustness against -damaged marker length counts, you may wish to insert a test in your -application for the case that the input buffer is completely full and yet -the decoder has suspended without consuming any data --- otherwise, if this -situation did occur, it would lead to an endless loop. (The library can't -provide this test since it has no idea whether "the buffer is full", or -even whether there is a fixed-size input buffer.) - -The input buffer would need to be 64K to allow for arbitrary COM or APPn -markers, but these are handled specially: they are either saved into allocated -memory, or skipped over by calling skip_input_data(). In the former case, -suspension is handled correctly, and in the latter case, the problem of -buffer overrun is placed on skip_input_data's shoulders, as explained above. -Note that if you provide your own marker handling routine for large markers, -you should consider how to deal with buffer overflow. - -Multiple-buffer management: - -In some applications it is desirable to store the compressed data in a linked -list of buffer areas, so as to avoid data copying. This can be handled by -having empty_output_buffer() or fill_input_buffer() set the pointer and count -to reference the next available buffer; FALSE is returned only if no more -buffers are available. Although seemingly straightforward, there is a -pitfall in this approach: the backtrack that occurs when FALSE is returned -could back up into an earlier buffer. For example, when fill_input_buffer() -is called, the current pointer & count indicate the backtrack restart point. -Since fill_input_buffer() will set the pointer and count to refer to a new -buffer, the restart position must be saved somewhere else. Suppose a second -call to fill_input_buffer() occurs in the same library call, and no -additional input data is available, so fill_input_buffer must return FALSE. -If the JPEG library has not moved the pointer/count forward in the current -buffer, then *the correct restart point is the saved position in the prior -buffer*. Prior buffers may be discarded only after the library establishes -a restart point within a later buffer. Similar remarks apply for output into -a chain of buffers. - -The library will never attempt to backtrack over a skip_input_data() call, -so any skipped data can be permanently discarded. You still have to deal -with the case of skipping not-yet-received data, however. - -It's much simpler to use only a single buffer; when fill_input_buffer() is -called, move any unconsumed data (beyond the current pointer/count) down to -the beginning of this buffer and then load new data into the remaining buffer -space. This approach requires a little more data copying but is far easier -to get right. - - -Progressive JPEG support ------------------------- - -Progressive JPEG rearranges the stored data into a series of scans of -increasing quality. In situations where a JPEG file is transmitted across a -slow communications link, a decoder can generate a low-quality image very -quickly from the first scan, then gradually improve the displayed quality as -more scans are received. The final image after all scans are complete is -identical to that of a regular (sequential) JPEG file of the same quality -setting. Progressive JPEG files are often slightly smaller than equivalent -sequential JPEG files, but the possibility of incremental display is the main -reason for using progressive JPEG. - -The IJG encoder library generates progressive JPEG files when given a -suitable "scan script" defining how to divide the data into scans. -Creation of progressive JPEG files is otherwise transparent to the encoder. -Progressive JPEG files can also be read transparently by the decoder library. -If the decoding application simply uses the library as defined above, it -will receive a final decoded image without any indication that the file was -progressive. Of course, this approach does not allow incremental display. -To perform incremental display, an application needs to use the decoder -library's "buffered-image" mode, in which it receives a decoded image -multiple times. - -Each displayed scan requires about as much work to decode as a full JPEG -image of the same size, so the decoder must be fairly fast in relation to the -data transmission rate in order to make incremental display useful. However, -it is possible to skip displaying the image and simply add the incoming bits -to the decoder's coefficient buffer. This is fast because only Huffman -decoding need be done, not IDCT, upsampling, colorspace conversion, etc. -The IJG decoder library allows the application to switch dynamically between -displaying the image and simply absorbing the incoming bits. A properly -coded application can automatically adapt the number of display passes to -suit the time available as the image is received. Also, a final -higher-quality display cycle can be performed from the buffered data after -the end of the file is reached. - -Progressive compression: - -To create a progressive JPEG file (or a multiple-scan sequential JPEG file), -set the scan_info cinfo field to point to an array of scan descriptors, and -perform compression as usual. Instead of constructing your own scan list, -you can call the jpeg_simple_progression() helper routine to create a -recommended progression sequence; this method should be used by all -applications that don't want to get involved in the nitty-gritty of -progressive scan sequence design. (If you want to provide user control of -scan sequences, you may wish to borrow the scan script reading code found -in rdswitch.c, so that you can read scan script files just like cjpeg's.) -When scan_info is not NULL, the compression library will store DCT'd data -into a buffer array as jpeg_write_scanlines() is called, and will emit all -the requested scans during jpeg_finish_compress(). This implies that -multiple-scan output cannot be created with a suspending data destination -manager, since jpeg_finish_compress() does not support suspension. We -should also note that the compressor currently forces Huffman optimization -mode when creating a progressive JPEG file, because the default Huffman -tables are unsuitable for progressive files. - -Progressive decompression: - -When buffered-image mode is not used, the decoder library will read all of -a multi-scan file during jpeg_start_decompress(), so that it can provide a -final decoded image. (Here "multi-scan" means either progressive or -multi-scan sequential.) This makes multi-scan files transparent to the -decoding application. However, existing applications that used suspending -input with version 5 of the IJG library will need to be modified to check -for a suspension return from jpeg_start_decompress(). - -To perform incremental display, an application must use the library's -buffered-image mode. This is described in the next section. - - -Buffered-image mode -------------------- - -In buffered-image mode, the library stores the partially decoded image in a -coefficient buffer, from which it can be read out as many times as desired. -This mode is typically used for incremental display of progressive JPEG files, -but it can be used with any JPEG file. Each scan of a progressive JPEG file -adds more data (more detail) to the buffered image. The application can -display in lockstep with the source file (one display pass per input scan), -or it can allow input processing to outrun display processing. By making -input and display processing run independently, it is possible for the -application to adapt progressive display to a wide range of data transmission -rates. - -The basic control flow for buffered-image decoding is - - jpeg_create_decompress() - set data source - jpeg_read_header() - set overall decompression parameters - cinfo.buffered_image = TRUE; /* select buffered-image mode */ - jpeg_start_decompress() - for (each output pass) { - adjust output decompression parameters if required - jpeg_start_output() /* start a new output pass */ - for (all scanlines in image) { - jpeg_read_scanlines() - display scanlines - } - jpeg_finish_output() /* terminate output pass */ - } - jpeg_finish_decompress() - jpeg_destroy_decompress() - -This differs from ordinary unbuffered decoding in that there is an additional -level of looping. The application can choose how many output passes to make -and how to display each pass. - -The simplest approach to displaying progressive images is to do one display -pass for each scan appearing in the input file. In this case the outer loop -condition is typically - while (! jpeg_input_complete(&cinfo)) -and the start-output call should read - jpeg_start_output(&cinfo, cinfo.input_scan_number); -The second parameter to jpeg_start_output() indicates which scan of the input -file is to be displayed; the scans are numbered starting at 1 for this -purpose. (You can use a loop counter starting at 1 if you like, but using -the library's input scan counter is easier.) The library automatically reads -data as necessary to complete each requested scan, and jpeg_finish_output() -advances to the next scan or end-of-image marker (hence input_scan_number -will be incremented by the time control arrives back at jpeg_start_output()). -With this technique, data is read from the input file only as needed, and -input and output processing run in lockstep. - -After reading the final scan and reaching the end of the input file, the -buffered image remains available; it can be read additional times by -repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output() -sequence. For example, a useful technique is to use fast one-pass color -quantization for display passes made while the image is arriving, followed by -a final display pass using two-pass quantization for highest quality. This -is done by changing the library parameters before the final output pass. -Changing parameters between passes is discussed in detail below. - -In general the last scan of a progressive file cannot be recognized as such -until after it is read, so a post-input display pass is the best approach if -you want special processing in the final pass. - -When done with the image, be sure to call jpeg_finish_decompress() to release -the buffered image (or just use jpeg_destroy_decompress()). - -If input data arrives faster than it can be displayed, the application can -cause the library to decode input data in advance of what's needed to produce -output. This is done by calling the routine jpeg_consume_input(). -The return value is one of the following: - JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan) - JPEG_REACHED_EOI: reached the EOI marker (end of image) - JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data - JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan - JPEG_SUSPENDED: suspended before completing any of the above -(JPEG_SUSPENDED can occur only if a suspending data source is used.) This -routine can be called at any time after initializing the JPEG object. It -reads some additional data and returns when one of the indicated significant -events occurs. (If called after the EOI marker is reached, it will -immediately return JPEG_REACHED_EOI without attempting to read more data.) - -The library's output processing will automatically call jpeg_consume_input() -whenever the output processing overtakes the input; thus, simple lockstep -display requires no direct calls to jpeg_consume_input(). But by adding -calls to jpeg_consume_input(), you can absorb data in advance of what is -being displayed. This has two benefits: - * You can limit buildup of unprocessed data in your input buffer. - * You can eliminate extra display passes by paying attention to the - state of the library's input processing. - -The first of these benefits only requires interspersing calls to -jpeg_consume_input() with your display operations and any other processing -you may be doing. To avoid wasting cycles due to backtracking, it's best to -call jpeg_consume_input() only after a hundred or so new bytes have arrived. -This is discussed further under "I/O suspension", above. (Note: the JPEG -library currently is not thread-safe. You must not call jpeg_consume_input() -from one thread of control if a different library routine is working on the -same JPEG object in another thread.) - -When input arrives fast enough that more than one new scan is available -before you start a new output pass, you may as well skip the output pass -corresponding to the completed scan. This occurs for free if you pass -cinfo.input_scan_number as the target scan number to jpeg_start_output(). -The input_scan_number field is simply the index of the scan currently being -consumed by the input processor. You can ensure that this is up-to-date by -emptying the input buffer just before calling jpeg_start_output(): call -jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or -JPEG_REACHED_EOI. - -The target scan number passed to jpeg_start_output() is saved in the -cinfo.output_scan_number field. The library's output processing calls -jpeg_consume_input() whenever the current input scan number and row within -that scan is less than or equal to the current output scan number and row. -Thus, input processing can "get ahead" of the output processing but is not -allowed to "fall behind". You can achieve several different effects by -manipulating this interlock rule. For example, if you pass a target scan -number greater than the current input scan number, the output processor will -wait until that scan starts to arrive before producing any output. (To avoid -an infinite loop, the target scan number is automatically reset to the last -scan number when the end of image is reached. Thus, if you specify a large -target scan number, the library will just absorb the entire input file and -then perform an output pass. This is effectively the same as what -jpeg_start_decompress() does when you don't select buffered-image mode.) -When you pass a target scan number equal to the current input scan number, -the image is displayed no faster than the current input scan arrives. The -final possibility is to pass a target scan number less than the current input -scan number; this disables the input/output interlock and causes the output -processor to simply display whatever it finds in the image buffer, without -waiting for input. (However, the library will not accept a target scan -number less than one, so you can't avoid waiting for the first scan.) - -When data is arriving faster than the output display processing can advance -through the image, jpeg_consume_input() will store data into the buffered -image beyond the point at which the output processing is reading data out -again. If the input arrives fast enough, it may "wrap around" the buffer to -the point where the input is more than one whole scan ahead of the output. -If the output processing simply proceeds through its display pass without -paying attention to the input, the effect seen on-screen is that the lower -part of the image is one or more scans better in quality than the upper part. -Then, when the next output scan is started, you have a choice of what target -scan number to use. The recommended choice is to use the current input scan -number at that time, which implies that you've skipped the output scans -corresponding to the input scans that were completed while you processed the -previous output scan. In this way, the decoder automatically adapts its -speed to the arriving data, by skipping output scans as necessary to keep up -with the arriving data. - -When using this strategy, you'll want to be sure that you perform a final -output pass after receiving all the data; otherwise your last display may not -be full quality across the whole screen. So the right outer loop logic is -something like this: - do { - absorb any waiting input by calling jpeg_consume_input() - final_pass = jpeg_input_complete(&cinfo); - adjust output decompression parameters if required - jpeg_start_output(&cinfo, cinfo.input_scan_number); - ... - jpeg_finish_output() - } while (! final_pass); -rather than quitting as soon as jpeg_input_complete() returns TRUE. This -arrangement makes it simple to use higher-quality decoding parameters -for the final pass. But if you don't want to use special parameters for -the final pass, the right loop logic is like this: - for (;;) { - absorb any waiting input by calling jpeg_consume_input() - jpeg_start_output(&cinfo, cinfo.input_scan_number); - ... - jpeg_finish_output() - if (jpeg_input_complete(&cinfo) && - cinfo.input_scan_number == cinfo.output_scan_number) - break; - } -In this case you don't need to know in advance whether an output pass is to -be the last one, so it's not necessary to have reached EOF before starting -the final output pass; rather, what you want to test is whether the output -pass was performed in sync with the final input scan. This form of the loop -will avoid an extra output pass whenever the decoder is able (or nearly able) -to keep up with the incoming data. - -When the data transmission speed is high, you might begin a display pass, -then find that much or all of the file has arrived before you can complete -the pass. (You can detect this by noting the JPEG_REACHED_EOI return code -from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().) -In this situation you may wish to abort the current display pass and start a -new one using the newly arrived information. To do so, just call -jpeg_finish_output() and then start a new pass with jpeg_start_output(). - -A variant strategy is to abort and restart display if more than one complete -scan arrives during an output pass; this can be detected by noting -JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This -idea should be employed with caution, however, since the display process -might never get to the bottom of the image before being aborted, resulting -in the lower part of the screen being several passes worse than the upper. -In most cases it's probably best to abort an output pass only if the whole -file has arrived and you want to begin the final output pass immediately. - -When receiving data across a communication link, we recommend always using -the current input scan number for the output target scan number; if a -higher-quality final pass is to be done, it should be started (aborting any -incomplete output pass) as soon as the end of file is received. However, -many other strategies are possible. For example, the application can examine -the parameters of the current input scan and decide whether to display it or -not. If the scan contains only chroma data, one might choose not to use it -as the target scan, expecting that the scan will be small and will arrive -quickly. To skip to the next scan, call jpeg_consume_input() until it -returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher -number as the target scan for jpeg_start_output(); but that method doesn't -let you inspect the next scan's parameters before deciding to display it. - - -In buffered-image mode, jpeg_start_decompress() never performs input and -thus never suspends. An application that uses input suspension with -buffered-image mode must be prepared for suspension returns from these -routines: -* jpeg_start_output() performs input only if you request 2-pass quantization - and the target scan isn't fully read yet. (This is discussed below.) -* jpeg_read_scanlines(), as always, returns the number of scanlines that it - was able to produce before suspending. -* jpeg_finish_output() will read any markers following the target scan, - up to the end of the file or the SOS marker that begins another scan. - (But it reads no input if jpeg_consume_input() has already reached the - end of the file or a SOS marker beyond the target output scan.) -* jpeg_finish_decompress() will read until the end of file, and thus can - suspend if the end hasn't already been reached (as can be tested by - calling jpeg_input_complete()). -jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress() -all return TRUE if they completed their tasks, FALSE if they had to suspend. -In the event of a FALSE return, the application must load more input data -and repeat the call. Applications that use non-suspending data sources need -not check the return values of these three routines. - - -It is possible to change decoding parameters between output passes in the -buffered-image mode. The decoder library currently supports only very -limited changes of parameters. ONLY THE FOLLOWING parameter changes are -allowed after jpeg_start_decompress() is called: -* dct_method can be changed before each call to jpeg_start_output(). - For example, one could use a fast DCT method for early scans, changing - to a higher quality method for the final scan. -* dither_mode can be changed before each call to jpeg_start_output(); - of course this has no impact if not using color quantization. Typically - one would use ordered dither for initial passes, then switch to - Floyd-Steinberg dither for the final pass. Caution: changing dither mode - can cause more memory to be allocated by the library. Although the amount - of memory involved is not large (a scanline or so), it may cause the - initial max_memory_to_use specification to be exceeded, which in the worst - case would result in an out-of-memory failure. -* do_block_smoothing can be changed before each call to jpeg_start_output(). - This setting is relevant only when decoding a progressive JPEG image. - During the first DC-only scan, block smoothing provides a very "fuzzy" look - instead of the very "blocky" look seen without it; which is better seems a - matter of personal taste. But block smoothing is nearly always a win - during later stages, especially when decoding a successive-approximation - image: smoothing helps to hide the slight blockiness that otherwise shows - up on smooth gradients until the lowest coefficient bits are sent. -* Color quantization mode can be changed under the rules described below. - You *cannot* change between full-color and quantized output (because that - would alter the required I/O buffer sizes), but you can change which - quantization method is used. - -When generating color-quantized output, changing quantization method is a -very useful way of switching between high-speed and high-quality display. -The library allows you to change among its three quantization methods: -1. Single-pass quantization to a fixed color cube. - Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL. -2. Single-pass quantization to an application-supplied colormap. - Selected by setting cinfo.colormap to point to the colormap (the value of - two_pass_quantize is ignored); also set cinfo.actual_number_of_colors. -3. Two-pass quantization to a colormap chosen specifically for the image. - Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL. - (This is the default setting selected by jpeg_read_header, but it is - probably NOT what you want for the first pass of progressive display!) -These methods offer successively better quality and lesser speed. However, -only the first method is available for quantizing in non-RGB color spaces. - -IMPORTANT: because the different quantizer methods have very different -working-storage requirements, the library requires you to indicate which -one(s) you intend to use before you call jpeg_start_decompress(). (If we did -not require this, the max_memory_to_use setting would be a complete fiction.) -You do this by setting one or more of these three cinfo fields to TRUE: - enable_1pass_quant Fixed color cube colormap - enable_external_quant Externally-supplied colormap - enable_2pass_quant Two-pass custom colormap -All three are initialized FALSE by jpeg_read_header(). But -jpeg_start_decompress() automatically sets TRUE the one selected by the -current two_pass_quantize and colormap settings, so you only need to set the -enable flags for any other quantization methods you plan to change to later. - -After setting the enable flags correctly at jpeg_start_decompress() time, you -can change to any enabled quantization method by setting two_pass_quantize -and colormap properly just before calling jpeg_start_output(). The following -special rules apply: -1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass - or 2-pass mode from a different mode, or when you want the 2-pass - quantizer to be re-run to generate a new colormap. -2. To switch to an external colormap, or to change to a different external - colormap than was used on the prior pass, you must call - jpeg_new_colormap() after setting cinfo.colormap. -NOTE: if you want to use the same colormap as was used in the prior pass, -you should not do either of these things. This will save some nontrivial -switchover costs. -(These requirements exist because cinfo.colormap will always be non-NULL -after completing a prior output pass, since both the 1-pass and 2-pass -quantizers set it to point to their output colormaps. Thus you have to -do one of these two things to notify the library that something has changed. -Yup, it's a bit klugy, but it's necessary to do it this way for backwards -compatibility.) - -Note that in buffered-image mode, the library generates any requested colormap -during jpeg_start_output(), not during jpeg_start_decompress(). - -When using two-pass quantization, jpeg_start_output() makes a pass over the -buffered image to determine the optimum color map; it therefore may take a -significant amount of time, whereas ordinarily it does little work. The -progress monitor hook is called during this pass, if defined. It is also -important to realize that if the specified target scan number is greater than -or equal to the current input scan number, jpeg_start_output() will attempt -to consume input as it makes this pass. If you use a suspending data source, -you need to check for a FALSE return from jpeg_start_output() under these -conditions. The combination of 2-pass quantization and a not-yet-fully-read -target scan is the only case in which jpeg_start_output() will consume input. - - -Application authors who support buffered-image mode may be tempted to use it -for all JPEG images, even single-scan ones. This will work, but it is -inefficient: there is no need to create an image-sized coefficient buffer for -single-scan images. Requesting buffered-image mode for such an image wastes -memory. Worse, it can cost time on large images, since the buffered data has -to be swapped out or written to a temporary file. If you are concerned about -maximum performance on baseline JPEG files, you should use buffered-image -mode only when the incoming file actually has multiple scans. This can be -tested by calling jpeg_has_multiple_scans(), which will return a correct -result at any time after jpeg_read_header() completes. - -It is also worth noting that when you use jpeg_consume_input() to let input -processing get ahead of output processing, the resulting pattern of access to -the coefficient buffer is quite nonsequential. It's best to use the memory -manager jmemnobs.c if you can (ie, if you have enough real or virtual main -memory). If not, at least make sure that max_memory_to_use is set as high as -possible. If the JPEG memory manager has to use a temporary file, you will -probably see a lot of disk traffic and poor performance. (This could be -improved with additional work on the memory manager, but we haven't gotten -around to it yet.) - -In some applications it may be convenient to use jpeg_consume_input() for all -input processing, including reading the initial markers; that is, you may -wish to call jpeg_consume_input() instead of jpeg_read_header() during -startup. This works, but note that you must check for JPEG_REACHED_SOS and -JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes. -Once the first SOS marker has been reached, you must call -jpeg_start_decompress() before jpeg_consume_input() will consume more input; -it'll just keep returning JPEG_REACHED_SOS until you do. If you read a -tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI -without ever returning JPEG_REACHED_SOS; be sure to check for this case. -If this happens, the decompressor will not read any more input until you call -jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not -using buffered-image mode, but in that case it's basically a no-op after the -initial markers have been read: it will just return JPEG_SUSPENDED. - - -Abbreviated datastreams and multiple images -------------------------------------------- - -A JPEG compression or decompression object can be reused to process multiple -images. This saves a small amount of time per image by eliminating the -"create" and "destroy" operations, but that isn't the real purpose of the -feature. Rather, reuse of an object provides support for abbreviated JPEG -datastreams. Object reuse can also simplify processing a series of images in -a single input or output file. This section explains these features. - -A JPEG file normally contains several hundred bytes worth of quantization -and Huffman tables. In a situation where many images will be stored or -transmitted with identical tables, this may represent an annoying overhead. -The JPEG standard therefore permits tables to be omitted. The standard -defines three classes of JPEG datastreams: - * "Interchange" datastreams contain an image and all tables needed to decode - the image. These are the usual kind of JPEG file. - * "Abbreviated image" datastreams contain an image, but are missing some or - all of the tables needed to decode that image. - * "Abbreviated table specification" (henceforth "tables-only") datastreams - contain only table specifications. -To decode an abbreviated image, it is necessary to load the missing table(s) -into the decoder beforehand. This can be accomplished by reading a separate -tables-only file. A variant scheme uses a series of images in which the first -image is an interchange (complete) datastream, while subsequent ones are -abbreviated and rely on the tables loaded by the first image. It is assumed -that once the decoder has read a table, it will remember that table until a -new definition for the same table number is encountered. - -It is the application designer's responsibility to figure out how to associate -the correct tables with an abbreviated image. While abbreviated datastreams -can be useful in a closed environment, their use is strongly discouraged in -any situation where data exchange with other applications might be needed. -Caveat designer. - -The JPEG library provides support for reading and writing any combination of -tables-only datastreams and abbreviated images. In both compression and -decompression objects, a quantization or Huffman table will be retained for -the lifetime of the object, unless it is overwritten by a new table definition. - - -To create abbreviated image datastreams, it is only necessary to tell the -compressor not to emit some or all of the tables it is using. Each -quantization and Huffman table struct contains a boolean field "sent_table", -which normally is initialized to FALSE. For each table used by the image, the -header-writing process emits the table and sets sent_table = TRUE unless it is -already TRUE. (In normal usage, this prevents outputting the same table -definition multiple times, as would otherwise occur because the chroma -components typically share tables.) Thus, setting this field to TRUE before -calling jpeg_start_compress() will prevent the table from being written at -all. - -If you want to create a "pure" abbreviated image file containing no tables, -just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the -tables. If you want to emit some but not all tables, you'll need to set the -individual sent_table fields directly. - -To create an abbreviated image, you must also call jpeg_start_compress() -with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress() -will force all the sent_table fields to FALSE. (This is a safety feature to -prevent abbreviated images from being created accidentally.) - -To create a tables-only file, perform the same parameter setup that you -normally would, but instead of calling jpeg_start_compress() and so on, call -jpeg_write_tables(&cinfo). This will write an abbreviated datastream -containing only SOI, DQT and/or DHT markers, and EOI. All the quantization -and Huffman tables that are currently defined in the compression object will -be emitted unless their sent_tables flag is already TRUE, and then all the -sent_tables flags will be set TRUE. - -A sure-fire way to create matching tables-only and abbreviated image files -is to proceed as follows: - - create JPEG compression object - set JPEG parameters - set destination to tables-only file - jpeg_write_tables(&cinfo); - set destination to image file - jpeg_start_compress(&cinfo, FALSE); - write data... - jpeg_finish_compress(&cinfo); - -Since the JPEG parameters are not altered between writing the table file and -the abbreviated image file, the same tables are sure to be used. Of course, -you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence -many times to produce many abbreviated image files matching the table file. - -You cannot suppress output of the computed Huffman tables when Huffman -optimization is selected. (If you could, there'd be no way to decode the -image...) Generally, you don't want to set optimize_coding = TRUE when -you are trying to produce abbreviated files. - -In some cases you might want to compress an image using tables which are -not stored in the application, but are defined in an interchange or -tables-only file readable by the application. This can be done by setting up -a JPEG decompression object to read the specification file, then copying the -tables into your compression object. See jpeg_copy_critical_parameters() -for an example of copying quantization tables. - - -To read abbreviated image files, you simply need to load the proper tables -into the decompression object before trying to read the abbreviated image. -If the proper tables are stored in the application program, you can just -allocate the table structs and fill in their contents directly. For example, -to load a fixed quantization table into table slot "n": - - if (cinfo.quant_tbl_ptrs[n] == NULL) - cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo); - quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */ - for (i = 0; i < 64; i++) { - /* Qtable[] is desired quantization table, in natural array order */ - quant_ptr->quantval[i] = Qtable[i]; - } - -Code to load a fixed Huffman table is typically (for AC table "n"): - - if (cinfo.ac_huff_tbl_ptrs[n] == NULL) - cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo); - huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */ - for (i = 1; i <= 16; i++) { - /* counts[i] is number of Huffman codes of length i bits, i=1..16 */ - huff_ptr->bits[i] = counts[i]; - } - for (i = 0; i < 256; i++) { - /* symbols[] is the list of Huffman symbols, in code-length order */ - huff_ptr->huffval[i] = symbols[i]; - } - -(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a -constant JQUANT_TBL object is not safe. If the incoming file happened to -contain a quantization table definition, your master table would get -overwritten! Instead allocate a working table copy and copy the master table -into it, as illustrated above. Ditto for Huffman tables, of course.) - -You might want to read the tables from a tables-only file, rather than -hard-wiring them into your application. The jpeg_read_header() call is -sufficient to read a tables-only file. You must pass a second parameter of -FALSE to indicate that you do not require an image to be present. Thus, the -typical scenario is - - create JPEG decompression object - set source to tables-only file - jpeg_read_header(&cinfo, FALSE); - set source to abbreviated image file - jpeg_read_header(&cinfo, TRUE); - set decompression parameters - jpeg_start_decompress(&cinfo); - read data... - jpeg_finish_decompress(&cinfo); - -In some cases, you may want to read a file without knowing whether it contains -an image or just tables. In that case, pass FALSE and check the return value -from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found, -JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value, -JPEG_SUSPENDED, is possible when using a suspending data source manager.) -Note that jpeg_read_header() will not complain if you read an abbreviated -image for which you haven't loaded the missing tables; the missing-table check -occurs later, in jpeg_start_decompress(). - - -It is possible to read a series of images from a single source file by -repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence, -without releasing/recreating the JPEG object or the data source module. -(If you did reinitialize, any partial bufferload left in the data source -buffer at the end of one image would be discarded, causing you to lose the -start of the next image.) When you use this method, stored tables are -automatically carried forward, so some of the images can be abbreviated images -that depend on tables from earlier images. - -If you intend to write a series of images into a single destination file, -you might want to make a specialized data destination module that doesn't -flush the output buffer at term_destination() time. This would speed things -up by some trifling amount. Of course, you'd need to remember to flush the -buffer after the last image. You can make the later images be abbreviated -ones by passing FALSE to jpeg_start_compress(). - - -Special markers ---------------- - -Some applications may need to insert or extract special data in the JPEG -datastream. The JPEG standard provides marker types "COM" (comment) and -"APP0" through "APP15" (application) to hold application-specific data. -Unfortunately, the use of these markers is not specified by the standard. -COM markers are fairly widely used to hold user-supplied text. The JFIF file -format spec uses APP0 markers with specified initial strings to hold certain -data. Adobe applications use APP14 markers beginning with the string "Adobe" -for miscellaneous data. Other APPn markers are rarely seen, but might -contain almost anything. - -If you wish to store user-supplied text, we recommend you use COM markers -and place readable 7-bit ASCII text in them. Newline conventions are not -standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR -(Mac style). A robust COM reader should be able to cope with random binary -garbage, including nulls, since some applications generate COM markers -containing non-ASCII junk. (But yours should not be one of them.) - -For program-supplied data, use an APPn marker, and be sure to begin it with an -identifying string so that you can tell whether the marker is actually yours. -It's probably best to avoid using APP0 or APP14 for any private markers. -(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you -not use APP8 markers for any private purposes, either.) - -Keep in mind that at most 65533 bytes can be put into one marker, but you -can have as many markers as you like. - -By default, the IJG compression library will write a JFIF APP0 marker if the -selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if -the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but -we don't recommend it. The decompression library will recognize JFIF and -Adobe markers and will set the JPEG colorspace properly when one is found. - - -You can write special markers immediately following the datastream header by -calling jpeg_write_marker() after jpeg_start_compress() and before the first -call to jpeg_write_scanlines(). When you do this, the markers appear after -the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before -all else. Specify the marker type parameter as "JPEG_COM" for COM or -"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write -any marker type, but we don't recommend writing any other kinds of marker.) -For example, to write a user comment string pointed to by comment_text: - jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text)); - -If it's not convenient to store all the marker data in memory at once, -you can instead call jpeg_write_m_header() followed by multiple calls to -jpeg_write_m_byte(). If you do it this way, it's your responsibility to -call jpeg_write_m_byte() exactly the number of times given in the length -parameter to jpeg_write_m_header(). (This method lets you empty the -output buffer partway through a marker, which might be important when -using a suspending data destination module. In any case, if you are using -a suspending destination, you should flush its buffer after inserting -any special markers. See "I/O suspension".) - -Or, if you prefer to synthesize the marker byte sequence yourself, -you can just cram it straight into the data destination module. - -If you are writing JFIF 1.02 extension markers (thumbnail images), don't -forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the -correct JFIF version number in the JFIF header marker. The library's default -is to write version 1.01, but that's wrong if you insert any 1.02 extension -markers. (We could probably get away with just defaulting to 1.02, but there -used to be broken decoders that would complain about unknown minor version -numbers. To reduce compatibility risks it's safest not to write 1.02 unless -you are actually using 1.02 extensions.) - - -When reading, two methods of handling special markers are available: -1. You can ask the library to save the contents of COM and/or APPn markers -into memory, and then examine them at your leisure afterwards. -2. You can supply your own routine to process COM and/or APPn markers -on-the-fly as they are read. -The first method is simpler to use, especially if you are using a suspending -data source; writing a marker processor that copes with input suspension is -not easy (consider what happens if the marker is longer than your available -input buffer). However, the second method conserves memory since the marker -data need not be kept around after it's been processed. - -For either method, you'd normally set up marker handling after creating a -decompression object and before calling jpeg_read_header(), because the -markers of interest will typically be near the head of the file and so will -be scanned by jpeg_read_header. Once you've established a marker handling -method, it will be used for the life of that decompression object -(potentially many datastreams), unless you change it. Marker handling is -determined separately for COM markers and for each APPn marker code. - - -To save the contents of special markers in memory, call - jpeg_save_markers(cinfo, marker_code, length_limit) -where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n. -(To arrange to save all the special marker types, you need to call this -routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer -than length_limit data bytes, only length_limit bytes will be saved; this -parameter allows you to avoid chewing up memory when you only need to see the -first few bytes of a potentially large marker. If you want to save all the -data, set length_limit to 0xFFFF; that is enough since marker lengths are only -16 bits. As a special case, setting length_limit to 0 prevents that marker -type from being saved at all. (That is the default behavior, in fact.) - -After jpeg_read_header() completes, you can examine the special markers by -following the cinfo->marker_list pointer chain. All the special markers in -the file appear in this list, in order of their occurrence in the file (but -omitting any markers of types you didn't ask for). Both the original data -length and the saved data length are recorded for each list entry; the latter -will not exceed length_limit for the particular marker type. Note that these -lengths exclude the marker length word, whereas the stored representation -within the JPEG file includes it. (Hence the maximum data length is really -only 65533.) - -It is possible that additional special markers appear in the file beyond the -SOS marker at which jpeg_read_header stops; if so, the marker list will be -extended during reading of the rest of the file. This is not expected to be -common, however. If you are short on memory you may want to reset the length -limit to zero for all marker types after finishing jpeg_read_header, to -ensure that the max_memory_to_use setting cannot be exceeded due to addition -of later markers. - -The marker list remains stored until you call jpeg_finish_decompress or -jpeg_abort, at which point the memory is freed and the list is set to empty. -(jpeg_destroy also releases the storage, of course.) - -Note that the library is internally interested in APP0 and APP14 markers; -if you try to set a small nonzero length limit on these types, the library -will silently force the length up to the minimum it wants. (But you can set -a zero length limit to prevent them from being saved at all.) Also, in a -16-bit environment, the maximum length limit may be constrained to less than -65533 by malloc() limitations. It is therefore best not to assume that the -effective length limit is exactly what you set it to be. - - -If you want to supply your own marker-reading routine, you do it by calling -jpeg_set_marker_processor(). A marker processor routine must have the -signature - boolean jpeg_marker_parser_method (j_decompress_ptr cinfo) -Although the marker code is not explicitly passed, the routine can find it -in cinfo->unread_marker. At the time of call, the marker proper has been -read from the data source module. The processor routine is responsible for -reading the marker length word and the remaining parameter bytes, if any. -Return TRUE to indicate success. (FALSE should be returned only if you are -using a suspending data source and it tells you to suspend. See the standard -marker processors in jdmarker.c for appropriate coding methods if you need to -use a suspending data source.) - -If you override the default APP0 or APP14 processors, it is up to you to -recognize JFIF and Adobe markers if you want colorspace recognition to occur -properly. We recommend copying and extending the default processors if you -want to do that. (A better idea is to save these marker types for later -examination by calling jpeg_save_markers(); that method doesn't interfere -with the library's own processing of these markers.) - -jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive ---- if you call one it overrides any previous call to the other, for the -particular marker type specified. - -A simple example of an external COM processor can be found in djpeg.c. -Also, see jpegtran.c for an example of using jpeg_save_markers. - - -Raw (downsampled) image data ----------------------------- - -Some applications need to supply already-downsampled image data to the JPEG -compressor, or to receive raw downsampled data from the decompressor. The -library supports this requirement by allowing the application to write or -read raw data, bypassing the normal preprocessing or postprocessing steps. -The interface is different from the standard one and is somewhat harder to -use. If your interest is merely in bypassing color conversion, we recommend -that you use the standard interface and simply set jpeg_color_space = -in_color_space (or jpeg_color_space = out_color_space for decompression). -The mechanism described in this section is necessary only to supply or -receive downsampled image data, in which not all components have the same -dimensions. - - -To compress raw data, you must supply the data in the colorspace to be used -in the JPEG file (please read the earlier section on Special color spaces) -and downsampled to the sampling factors specified in the JPEG parameters. -You must supply the data in the format used internally by the JPEG library, -namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional -arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one -color component. This structure is necessary since the components are of -different sizes. If the image dimensions are not a multiple of the MCU size, -you must also pad the data correctly (usually, this is done by replicating -the last column and/or row). The data must be padded to a multiple of a DCT -block in each component: that is, each downsampled row must contain a -multiple of 8 valid samples, and there must be a multiple of 8 sample rows -for each component. (For applications such as conversion of digital TV -images, the standard image size is usually a multiple of the DCT block size, -so that no padding need actually be done.) - -The procedure for compression of raw data is basically the same as normal -compression, except that you call jpeg_write_raw_data() in place of -jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do -the following: - * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().) - This notifies the library that you will be supplying raw data. - * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace() - call is a good idea. Note that since color conversion is bypassed, - in_color_space is ignored, except that jpeg_set_defaults() uses it to - choose the default jpeg_color_space setting. - * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and - cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the - dimensions of the data you are supplying, it's wise to set them - explicitly, rather than assuming the library's defaults are what you want. - -To pass raw data to the library, call jpeg_write_raw_data() in place of -jpeg_write_scanlines(). The two routines work similarly except that -jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY. -The scanlines count passed to and returned from jpeg_write_raw_data is -measured in terms of the component with the largest v_samp_factor. - -jpeg_write_raw_data() processes one MCU row per call, which is to say -v_samp_factor*DCTSIZE sample rows of each component. The passed num_lines -value must be at least max_v_samp_factor*DCTSIZE, and the return value will -be exactly that amount (or possibly some multiple of that amount, in future -library versions). This is true even on the last call at the bottom of the -image; don't forget to pad your data as necessary. - -The required dimensions of the supplied data can be computed for each -component as - cinfo->comp_info[i].width_in_blocks*DCTSIZE samples per row - cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image -after jpeg_start_compress() has initialized those fields. If the valid data -is smaller than this, it must be padded appropriately. For some sampling -factors and image sizes, additional dummy DCT blocks are inserted to make -the image a multiple of the MCU dimensions. The library creates such dummy -blocks itself; it does not read them from your supplied data. Therefore you -need never pad by more than DCTSIZE samples. An example may help here. -Assume 2h2v downsampling of YCbCr data, that is - cinfo->comp_info[0].h_samp_factor = 2 for Y - cinfo->comp_info[0].v_samp_factor = 2 - cinfo->comp_info[1].h_samp_factor = 1 for Cb - cinfo->comp_info[1].v_samp_factor = 1 - cinfo->comp_info[2].h_samp_factor = 1 for Cr - cinfo->comp_info[2].v_samp_factor = 1 -and suppose that the nominal image dimensions (cinfo->image_width and -cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will -compute downsampled_width = 101 and width_in_blocks = 13 for Y, -downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same -for the height fields). You must pad the Y data to at least 13*8 = 104 -columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The -MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16 -scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual -sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed, -so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row -of Y data is dummy, so it doesn't matter what you pass for it in the data -arrays, but the scanlines count must total up to 112 so that all of the Cb -and Cr data gets passed. - -Output suspension is supported with raw-data compression: if the data -destination module suspends, jpeg_write_raw_data() will return 0. -In this case the same data rows must be passed again on the next call. - - -Decompression with raw data output implies bypassing all postprocessing: -you cannot ask for rescaling or color quantization, for instance. More -seriously, you must deal with the color space and sampling factors present in -the incoming file. If your application only handles, say, 2h1v YCbCr data, -you must check for and fail on other color spaces or other sampling factors. -The library will not convert to a different color space for you. - -To obtain raw data output, set cinfo->raw_data_out = TRUE before -jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to -verify that the color space and sampling factors are ones you can handle. -Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The -decompression process is otherwise the same as usual. - -jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a -buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is -the same as for raw-data compression). The buffer you pass must be large -enough to hold the actual data plus padding to DCT-block boundaries. As with -compression, any entirely dummy DCT blocks are not processed so you need not -allocate space for them, but the total scanline count includes them. The -above example of computing buffer dimensions for raw-data compression is -equally valid for decompression. - -Input suspension is supported with raw-data decompression: if the data source -module suspends, jpeg_read_raw_data() will return 0. You can also use -buffered-image mode to read raw data in multiple passes. - - -Really raw data: DCT coefficients ---------------------------------- - -It is possible to read or write the contents of a JPEG file as raw DCT -coefficients. This facility is mainly intended for use in lossless -transcoding between different JPEG file formats. Other possible applications -include lossless cropping of a JPEG image, lossless reassembly of a -multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc. - -To read the contents of a JPEG file as DCT coefficients, open the file and do -jpeg_read_header() as usual. But instead of calling jpeg_start_decompress() -and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the -entire image into a set of virtual coefficient-block arrays, one array per -component. The return value is a pointer to an array of virtual-array -descriptors. Each virtual array can be accessed directly using the JPEG -memory manager's access_virt_barray method (see Memory management, below, -and also read structure.doc's discussion of virtual array handling). Or, -for simple transcoding to a different JPEG file format, the array list can -just be handed directly to jpeg_write_coefficients(). - -Each block in the block arrays contains quantized coefficient values in -normal array order (not JPEG zigzag order). The block arrays contain only -DCT blocks containing real data; any entirely-dummy blocks added to fill out -interleaved MCUs at the right or bottom edges of the image are discarded -during reading and are not stored in the block arrays. (The size of each -block array can be determined from the width_in_blocks and height_in_blocks -fields of the component's comp_info entry.) This is also the data format -expected by jpeg_write_coefficients(). - -When you are done using the virtual arrays, call jpeg_finish_decompress() -to release the array storage and return the decompression object to an idle -state; or just call jpeg_destroy() if you don't need to reuse the object. - -If you use a suspending data source, jpeg_read_coefficients() will return -NULL if it is forced to suspend; a non-NULL return value indicates successful -completion. You need not test for a NULL return value when using a -non-suspending data source. - -It is also possible to call jpeg_read_coefficients() to obtain access to the -decoder's coefficient arrays during a normal decode cycle in buffered-image -mode. This frammish might be useful for progressively displaying an incoming -image and then re-encoding it without loss. To do this, decode in buffered- -image mode as discussed previously, then call jpeg_read_coefficients() after -the last jpeg_finish_output() call. The arrays will be available for your use -until you call jpeg_finish_decompress(). - - -To write the contents of a JPEG file as DCT coefficients, you must provide -the DCT coefficients stored in virtual block arrays. You can either pass -block arrays read from an input JPEG file by jpeg_read_coefficients(), or -allocate virtual arrays from the JPEG compression object and fill them -yourself. In either case, jpeg_write_coefficients() is substituted for -jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is - * Create compression object - * Set all compression parameters as necessary - * Request virtual arrays if needed - * jpeg_write_coefficients() - * jpeg_finish_compress() - * Destroy or re-use compression object -jpeg_write_coefficients() is passed a pointer to an array of virtual block -array descriptors; the number of arrays is equal to cinfo.num_components. - -The virtual arrays need only have been requested, not realized, before -jpeg_write_coefficients() is called. A side-effect of -jpeg_write_coefficients() is to realize any virtual arrays that have been -requested from the compression object's memory manager. Thus, when obtaining -the virtual arrays from the compression object, you should fill the arrays -after calling jpeg_write_coefficients(). The data is actually written out -when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes -the file header. - -When writing raw DCT coefficients, it is crucial that the JPEG quantization -tables and sampling factors match the way the data was encoded, or the -resulting file will be invalid. For transcoding from an existing JPEG file, -we recommend using jpeg_copy_critical_parameters(). This routine initializes -all the compression parameters to default values (like jpeg_set_defaults()), -then copies the critical information from a source decompression object. -The decompression object should have just been used to read the entire -JPEG input file --- that is, it should be awaiting jpeg_finish_decompress(). - -jpeg_write_coefficients() marks all tables stored in the compression object -as needing to be written to the output file (thus, it acts like -jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid -emitting abbreviated JPEG files by accident. If you really want to emit an -abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables' -individual sent_table flags, between calling jpeg_write_coefficients() and -jpeg_finish_compress(). - - -Progress monitoring -------------------- - -Some applications may need to regain control from the JPEG library every so -often. The typical use of this feature is to produce a percent-done bar or -other progress display. (For a simple example, see cjpeg.c or djpeg.c.) -Although you do get control back frequently during the data-transferring pass -(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes -will occur inside jpeg_finish_compress or jpeg_start_decompress; those -routines may take a long time to execute, and you don't get control back -until they are done. - -You can define a progress-monitor routine which will be called periodically -by the library. No guarantees are made about how often this call will occur, -so we don't recommend you use it for mouse tracking or anything like that. -At present, a call will occur once per MCU row, scanline, or sample row -group, whichever unit is convenient for the current processing mode; so the -wider the image, the longer the time between calls. During the data -transferring pass, only one call occurs per call of jpeg_read_scanlines or -jpeg_write_scanlines, so don't pass a large number of scanlines at once if -you want fine resolution in the progress count. (If you really need to use -the callback mechanism for time-critical tasks like mouse tracking, you could -insert additional calls inside some of the library's inner loops.) - -To establish a progress-monitor callback, create a struct jpeg_progress_mgr, -fill in its progress_monitor field with a pointer to your callback routine, -and set cinfo->progress to point to the struct. The callback will be called -whenever cinfo->progress is non-NULL. (This pointer is set to NULL by -jpeg_create_compress or jpeg_create_decompress; the library will not change -it thereafter. So if you allocate dynamic storage for the progress struct, -make sure it will live as long as the JPEG object does. Allocating from the -JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You -can use the same callback routine for both compression and decompression. - -The jpeg_progress_mgr struct contains four fields which are set by the library: - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -During any one pass, pass_counter increases from 0 up to (not including) -pass_limit; the step size is usually but not necessarily 1. The pass_limit -value may change from one pass to another. The expected total number of -passes is in total_passes, and the number of passes already completed is in -completed_passes. Thus the fraction of work completed may be estimated as - completed_passes + (pass_counter/pass_limit) - -------------------------------------------- - total_passes -ignoring the fact that the passes may not be equal amounts of work. - -When decompressing, pass_limit can even change within a pass, because it -depends on the number of scans in the JPEG file, which isn't always known in -advance. The computed fraction-of-work-done may jump suddenly (if the library -discovers it has overestimated the number of scans) or even decrease (in the -opposite case). It is not wise to put great faith in the work estimate. - -When using the decompressor's buffered-image mode, the progress monitor work -estimate is likely to be completely unhelpful, because the library has no way -to know how many output passes will be demanded of it. Currently, the library -sets total_passes based on the assumption that there will be one more output -pass if the input file end hasn't yet been read (jpeg_input_complete() isn't -TRUE), but no more output passes if the file end has been reached when the -output pass is started. This means that total_passes will rise as additional -output passes are requested. If you have a way of determining the input file -size, estimating progress based on the fraction of the file that's been read -will probably be more useful than using the library's value. - - -Memory management ------------------ - -This section covers some key facts about the JPEG library's built-in memory -manager. For more info, please read structure.doc's section about the memory -manager, and consult the source code if necessary. - -All memory and temporary file allocation within the library is done via the -memory manager. If necessary, you can replace the "back end" of the memory -manager to control allocation yourself (for example, if you don't want the -library to use malloc() and free() for some reason). - -Some data is allocated "permanently" and will not be freed until the JPEG -object is destroyed. Most data is allocated "per image" and is freed by -jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the -memory manager yourself to allocate structures that will automatically be -freed at these times. Typical code for this is - ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size); -Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object. -Use alloc_large instead of alloc_small for anything bigger than a few Kbytes. -There are also alloc_sarray and alloc_barray routines that automatically -build 2-D sample or block arrays. - -The library's minimum space requirements to process an image depend on the -image's width, but not on its height, because the library ordinarily works -with "strip" buffers that are as wide as the image but just a few rows high. -Some operating modes (eg, two-pass color quantization) require full-image -buffers. Such buffers are treated as "virtual arrays": only the current strip -need be in memory, and the rest can be swapped out to a temporary file. - -If you use the simplest memory manager back end (jmemnobs.c), then no -temporary files are used; virtual arrays are simply malloc()'d. Images bigger -than memory can be processed only if your system supports virtual memory. -The other memory manager back ends support temporary files of various flavors -and thus work in machines without virtual memory. They may also be useful on -Unix machines if you need to process images that exceed available swap space. - -When using temporary files, the library will make the in-memory buffers for -its virtual arrays just big enough to stay within a "maximum memory" setting. -Your application can set this limit by setting cinfo->mem->max_memory_to_use -after creating the JPEG object. (Of course, there is still a minimum size for -the buffers, so the max-memory setting is effective only if it is bigger than -the minimum space needed.) If you allocate any large structures yourself, you -must allocate them before jpeg_start_compress() or jpeg_start_decompress() in -order to have them counted against the max memory limit. Also keep in mind -that space allocated with alloc_small() is ignored, on the assumption that -it's too small to be worth worrying about; so a reasonable safety margin -should be left when setting max_memory_to_use. - -If you use the jmemname.c or jmemdos.c memory manager back end, it is -important to clean up the JPEG object properly to ensure that the temporary -files get deleted. (This is especially crucial with jmemdos.c, where the -"temporary files" may be extended-memory segments; if they are not freed, -DOS will require a reboot to recover the memory.) Thus, with these memory -managers, it's a good idea to provide a signal handler that will trap any -early exit from your program. The handler should call either jpeg_abort() -or jpeg_destroy() for any active JPEG objects. A handler is not needed with -jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either, -since the C library is supposed to take care of deleting files made with -tmpfile(). - - -Memory usage ------------- - -Working memory requirements while performing compression or decompression -depend on image dimensions, image characteristics (such as colorspace and -JPEG process), and operating mode (application-selected options). - -As of v6b, the decompressor requires: - 1. About 24K in more-or-less-fixed-size data. This varies a bit depending - on operating mode and image characteristics (particularly color vs. - grayscale), but it doesn't depend on image dimensions. - 2. Strip buffers (of size proportional to the image width) for IDCT and - upsampling results. The worst case for commonly used sampling factors - is about 34 bytes * width in pixels for a color image. A grayscale image - only needs about 8 bytes per pixel column. - 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG - file (including progressive JPEGs), or whenever you select buffered-image - mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's - 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires - 6 bytes/pixel. For grayscale, figure 2 bytes/pixel. - 4. To perform 2-pass color quantization, the decompressor also needs a - 128K color lookup table and a full-image pixel buffer (3 bytes/pixel). -This does not count any memory allocated by the application, such as a -buffer to hold the final output image. - -The above figures are valid for 8-bit JPEG data precision and a machine with -32-bit ints. For 12-bit JPEG data, double the size of the strip buffers and -quantization pixel buffer. The "fixed-size" data will be somewhat smaller -with 16-bit ints, larger with 64-bit ints. Also, CMYK or other unusual -color spaces will require different amounts of space. - -The full-image coefficient and pixel buffers, if needed at all, do not -have to be fully RAM resident; you can have the library use temporary -files instead when the total memory usage would exceed a limit you set. -(But if your OS supports virtual memory, it's probably better to just use -jmemnobs and let the OS do the swapping.) - -The compressor's memory requirements are similar, except that it has no need -for color quantization. Also, it needs a full-image DCT coefficient buffer -if Huffman-table optimization is asked for, even if progressive mode is not -requested. - -If you need more detailed information about memory usage in a particular -situation, you can enable the MEM_STATS code in jmemmgr.c. - - -Library compile-time options ----------------------------- - -A number of compile-time options are available by modifying jmorecfg.h. - -The JPEG standard provides for both the baseline 8-bit DCT process and -a 12-bit DCT process. The IJG code supports 12-bit lossy JPEG if you define -BITS_IN_JSAMPLE as 12 rather than 8. Note that this causes JSAMPLE to be -larger than a char, so it affects the surrounding application's image data. -The sample applications cjpeg and djpeg can support 12-bit mode only for PPM -and GIF file formats; you must disable the other file formats to compile a -12-bit cjpeg or djpeg. (install.doc has more information about that.) -At present, a 12-bit library can handle *only* 12-bit images, not both -precisions. (If you need to include both 8- and 12-bit libraries in a single -application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES -for just one of the copies. You'd have to access the 8-bit and 12-bit copies -from separate application source files. This is untested ... if you try it, -we'd like to hear whether it works!) - -Note that a 12-bit library always compresses in Huffman optimization mode, -in order to generate valid Huffman tables. This is necessary because our -default Huffman tables only cover 8-bit data. If you need to output 12-bit -files in one pass, you'll have to supply suitable default Huffman tables. -You may also want to supply your own DCT quantization tables; the existing -quality-scaling code has been developed for 8-bit use, and probably doesn't -generate especially good tables for 12-bit. - -The maximum number of components (color channels) in the image is determined -by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we -expect that few applications will need more than four or so. - -On machines with unusual data type sizes, you may be able to improve -performance or reduce memory space by tweaking the various typedefs in -jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s -is quite slow; consider trading memory for speed by making JCOEF, INT16, and -UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int. -You probably don't want to make JSAMPLE be int unless you have lots of memory -to burn. - -You can reduce the size of the library by compiling out various optional -functions. To do this, undefine xxx_SUPPORTED symbols as necessary. - -You can also save a few K by not having text error messages in the library; -the standard error message table occupies about 5Kb. This is particularly -reasonable for embedded applications where there's no good way to display -a message anyway. To do this, remove the creation of the message table -(jpeg_std_message_table[]) from jerror.c, and alter format_message to do -something reasonable without it. You could output the numeric value of the -message code number, for example. If you do this, you can also save a couple -more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing; -you don't need trace capability anyway, right? - - -Portability considerations --------------------------- - -The JPEG library has been written to be extremely portable; the sample -applications cjpeg and djpeg are slightly less so. This section summarizes -the design goals in this area. (If you encounter any bugs that cause the -library to be less portable than is claimed here, we'd appreciate hearing -about them.) - -The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of -the popular system include file setups, and some not-so-popular ones too. -See install.doc for configuration procedures. - -The code is not dependent on the exact sizes of the C data types. As -distributed, we make the assumptions that - char is at least 8 bits wide - short is at least 16 bits wide - int is at least 16 bits wide - long is at least 32 bits wide -(These are the minimum requirements of the ANSI C standard.) Wider types will -work fine, although memory may be used inefficiently if char is much larger -than 8 bits or short is much bigger than 16 bits. The code should work -equally well with 16- or 32-bit ints. - -In a system where these assumptions are not met, you may be able to make the -code work by modifying the typedefs in jmorecfg.h. However, you will probably -have difficulty if int is less than 16 bits wide, since references to plain -int abound in the code. - -char can be either signed or unsigned, although the code runs faster if an -unsigned char type is available. If char is wider than 8 bits, you will need -to redefine JOCTET and/or provide custom data source/destination managers so -that JOCTET represents exactly 8 bits of data on external storage. - -The JPEG library proper does not assume ASCII representation of characters. -But some of the image file I/O modules in cjpeg/djpeg do have ASCII -dependencies in file-header manipulation; so does cjpeg's select_file_type() -routine. - -The JPEG library does not rely heavily on the C library. In particular, C -stdio is used only by the data source/destination modules and the error -handler, all of which are application-replaceable. (cjpeg/djpeg are more -heavily dependent on stdio.) malloc and free are called only from the memory -manager "back end" module, so you can use a different memory allocator by -replacing that one file. - -The code generally assumes that C names must be unique in the first 15 -characters. However, global function names can be made unique in the -first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES. - -More info about porting the code may be gleaned by reading jconfig.doc, -jmorecfg.h, and jinclude.h. - - -Notes for MS-DOS implementors ------------------------------ - -The IJG code is designed to work efficiently in 80x86 "small" or "medium" -memory models (i.e., data pointers are 16 bits unless explicitly declared -"far"; code pointers can be either size). You may be able to use small -model to compile cjpeg or djpeg by itself, but you will probably have to use -medium model for any larger application. This won't make much difference in -performance. You *will* take a noticeable performance hit if you use a -large-data memory model (perhaps 10%-25%), and you should avoid "huge" model -if at all possible. - -The JPEG library typically needs 2Kb-3Kb of stack space. It will also -malloc about 20K-30K of near heap space while executing (and lots of far -heap, but that doesn't count in this calculation). This figure will vary -depending on selected operating mode, and to a lesser extent on image size. -There is also about 5Kb-6Kb of constant data which will be allocated in the -near data segment (about 4Kb of this is the error message table). -Thus you have perhaps 20K available for other modules' static data and near -heap space before you need to go to a larger memory model. The C library's -static data will account for several K of this, but that still leaves a good -deal for your needs. (If you are tight on space, you could reduce the sizes -of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to -1K. Another possibility is to move the error message table to far memory; -this should be doable with only localized hacking on jerror.c.) - -About 2K of the near heap space is "permanent" memory that will not be -released until you destroy the JPEG object. This is only an issue if you -save a JPEG object between compression or decompression operations. - -Far data space may also be a tight resource when you are dealing with large -images. The most memory-intensive case is decompression with two-pass color -quantization, or single-pass quantization to an externally supplied color -map. This requires a 128Kb color lookup table plus strip buffers amounting -to about 40 bytes per column for typical sampling ratios (eg, about 25600 -bytes for a 640-pixel-wide image). You may not be able to process wide -images if you have large data structures of your own. - -Of course, all of these concerns vanish if you use a 32-bit flat-memory-model -compiler, such as DJGPP or Watcom C. We highly recommend flat model if you -can use it; the JPEG library is significantly faster in flat model. diff --git a/libjpegtwrp/ltconfig b/libjpegtwrp/ltconfig deleted file mode 100755 index 2347e6943..000000000 --- a/libjpegtwrp/ltconfig +++ /dev/null @@ -1,1512 +0,0 @@ -#! /bin/sh - -# ltconfig - Create a system-specific libtool. -# Copyright (C) 1996-1998 Free Software Foundation, Inc. -# Gordon Matzigkeit , 1996 -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A lot of this script is taken from autoconf-2.10. - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi - -echo=echo -if test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then : -else - # The Solaris and AIX default echo program unquotes backslashes. - # This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # So, we emulate echo with printf '%s\n' - echo="printf %s\\n" - if test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then : - else - # Oops. We have no working printf. Try to find a not-so-buggy echo. - echo=echo - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH /usr/ucb; do - if test -f $dir/echo && test "X`$dir/echo '\t'`" = 'X\t'; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - fi -fi - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# The name of this program. -progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` - -# Constants: -PROGRAM=ltconfig -PACKAGE=libtool -VERSION=1.2 -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5' -rm="rm -f" - -help="Try \`$progname --help' for more information." - -# Global variables: -can_build_shared=yes -enable_shared=yes -# All known linkers require a `.a' archive for static linking. -enable_static=yes -ltmain= -silent= -srcdir= -ac_config_guess= -ac_config_sub= -host= -nonopt= -verify_host=yes -with_gcc=no -with_gnu_ld=no - -old_AR="$AR" -old_CC="$CC" -old_CFLAGS="$CFLAGS" -old_CPPFLAGS="$CPPFLAGS" -old_LD="$LD" -old_LN_S="$LN_S" -old_NM="$NM" -old_RANLIB="$RANLIB" - -# Parse the command line options. -args= -prev= -for option -do - case "$option" in - -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - eval "$prev=\$option" - prev= - continue - fi - - case "$option" in - --help) cat <&2 - echo "$help" 1>&2 - exit 1 - ;; - - *) - if test -z "$ltmain"; then - ltmain="$option" - elif test -z "$host"; then -# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 -# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then -# echo "$progname: warning \`$option' is not a valid host type" 1>&2 -# fi - host="$option" - else - echo "$progname: too many arguments" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac -done - -if test -z "$ltmain"; then - echo "$progname: you must specify a LTMAIN file" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -if test -f "$ltmain"; then : -else - echo "$progname: \`$ltmain' does not exist" 1>&2 - echo "$help" 1>&2 - exit 1 -fi - -# Quote any args containing shell metacharacters. -ltconfig_args= -for arg -do - case "$arg" in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ltconfig_args="$ltconfig_args '$arg'" ;; - *) ltconfig_args="$ltconfig_args $arg" ;; - esac -done - -# A relevant subset of AC_INIT. - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 5 compiler messages saved in config.log -# 6 checking for... messages and results -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>>./config.log - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LANG+set}" = set; then LANG=C; export LANG; fi - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - -if test -z "$srcdir"; then - # Assume the source directory is the same one as the path to ltmain.sh. - srcdir=`$echo "$ltmain" | $Xsed -e 's%/[^/]*$%%'` - test "$srcdir" = "$ltmain" && srcdir=. -fi - -trap "$rm conftest*; exit 1" 1 2 15 -if test "$verify_host" = yes; then - # Check for config.guess and config.sub. - ac_aux_dir= - for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/config.guess; then - ac_aux_dir=$ac_dir - break - fi - done - if test -z "$ac_aux_dir"; then - echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 - echo "$help" 1>&2 - exit 1 - fi - ac_config_guess=$ac_aux_dir/config.guess - ac_config_sub=$ac_aux_dir/config.sub - - # Make sure we can run config.sub. - if $ac_config_sub sun4 >/dev/null 2>&1; then : - else - echo "$progname: cannot run $ac_config_sub" 1>&2 - echo "$help" 1>&2 - exit 1 - fi - - echo $ac_n "checking host system type""... $ac_c" 1>&6 - - host_alias=$host - case "$host_alias" in - "") - if host_alias=`$ac_config_guess`; then : - else - echo "$progname: cannot guess host type; you must specify one" 1>&2 - echo "$help" 1>&2 - exit 1 - fi ;; - esac - host=`$ac_config_sub $host_alias` - echo "$ac_t$host" 1>&6 - - # Make sure the host verified. - test -z "$host" && exit 1 - -elif test -z "$host"; then - echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 - echo "$help" 1>&2 - exit 1 -else - host_alias=$host -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case "$host_os" in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -case "$host_os" in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "${COLLECT_NAMES+set}" != set; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR cru $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -# Set a sane default for `AR'. -test -z "$AR" && AR=ar - -# If RANLIB is not set, then run the test. -if test "${RANLIB+set}" != "set"; then - result=no - - echo $ac_n "checking for ranlib... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/ranlib; then - RANLIB="ranlib" - result="ranlib" - break - fi - done - IFS="$save_ifs" - - echo "$ac_t$result" 1>&6 -fi - -if test -n "$RANLIB"; then - old_archive_cmds="$old_archive_cmds;\$RANLIB \$oldlib" - old_postinstall_cmds="\$RANLIB \$oldlib;$old_postinstall_cmds" -fi - -# Check to see if we are using GCC. -if test "$with_gcc" != yes || test -z "$CC"; then - # If CC is not set, then try to find GCC or a usable CC. - if test -z "$CC"; then - echo $ac_n "checking for gcc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - IFS="$save_ifs" - test -z "$dir" && dir=. - if test -f $dir/gcc; then - CC="gcc" - break - fi - done - IFS="$save_ifs" - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - fi - - # Not "gcc", so try "cc", rejecting "/usr/ucb/cc". - if test -z "$CC"; then - echo $ac_n "checking for cc... $ac_c" 1>&6 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - cc_rejected=no - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/cc; then - if test "$dir/cc" = "/usr/ucb/cc"; then - cc_rejected=yes - continue - fi - CC="cc" - break - fi - done - IFS="$save_ifs" - if test $cc_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same name, so the bogon will be chosen - # first if we set CC to just the name; use the full file name. - shift - set dummy "$dir/cc" "$@" - shift - CC="$@" - fi - fi - - if test -n "$CC"; then - echo "$ac_t$CC" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$CC"; then - echo "$progname: error: no acceptable cc found in \$PATH" 1>&2 - exit 1 - fi - fi - - # Now see if the compiler is really GCC. - with_gcc=no - echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6 - echo "$progname:424: checking whether we are using GNU C" >&5 - - $rm conftest.c - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - with_gcc=yes - fi - $rm conftest.c - echo "$ac_t$with_gcc" 1>&6 -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 -pic_flag= -special_shlib_compile_flags= -wl= -link_static_flag= -no_builtin_flag= - -if test "$with_gcc" = yes; then - wl='-Wl,' - link_static_flag='-static' - no_builtin_flag=' -fno-builtin' - - case "$host_os" in - aix3* | aix4* | irix5* | irix6* | osf3* | osf4*) - # PIC is the default for these OSes. - ;; - os2*) - # We can build DLLs from non-PIC. - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - pic_flag='-m68020 -resident32 -malways-restore-a4' - ;; - *) - pic_flag='-fPIC' - ;; - esac -else - # PORTME Check for PIC flags for the system compiler. - case "$host_os" in - aix3* | aix4*) - # All AIX code is PIC. - link_static_flag='-bnso -bI:/lib/syscalls.exp' - ;; - - hpux9* | hpux10*) - # Is there a better link_static_flag that works with the bundled CC? - wl='-Wl,' - link_static_flag="${wl}-a ${wl}archive" - pic_flag='+Z' - ;; - - irix5* | irix6*) - wl='-Wl,' - link_static_flag='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - os2*) - # We can build DLLs from non-PIC. - ;; - - osf3* | osf4*) - # All OSF/1 code is PIC. - wl='-Wl,' - link_static_flag='-non_shared' - ;; - - sco3.2v5*) - pic_flag='-Kpic' - link_static_flag='-dn' - special_shlib_compile_flags='-belf' - ;; - - solaris2*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - sunos4*) - pic_flag='-PIC' - link_static_flag='-Bstatic' - wl='-Qoption ld ' - ;; - - sysv4.2uw2*) - pic_flag='-KPIC' - link_static_flag='-Bstatic' - wl='-Wl,' - ;; - - uts4*) - pic_flag='-pic' - link_static_flag='-Bstatic' - ;; - - *) - can_build_shared=no - ;; - esac -fi - -if test -n "$pic_flag"; then - echo "$ac_t$pic_flag" 1>&6 - - # Check to make sure the pic_flag actually works. - echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6 - $rm conftest* - echo > conftest.c - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $pic_flag -DPIC" - echo "$progname:547: checking if $compiler PIC flag $pic_flag works" >&5 - if { (eval echo $progname:548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then - # Append any warnings to the config.log. - cat conftest.err 1>&5 - - # On HP-UX, both CC and GCC only warn that PIC is supported... then they - # create non-PIC objects. So, if there were any warnings, we assume that - # PIC is not supported. - if test -s conftest.err; then - echo "$ac_t"no 1>&6 - can_build_shared=no - pic_flag= - else - echo "$ac_t"yes 1>&6 - pic_flag=" $pic_flag" - fi - else - # Append any errors to the config.log. - cat conftest.err 1>&5 - can_build_shared=no - pic_flag= - echo "$ac_t"no 1>&6 - fi - CFLAGS="$save_CFLAGS" - $rm conftest* -else - echo "$ac_t"none 1>&6 -fi - -# Check for any special shared library compilation flags. -if test -n "$special_shlib_compile_flags"; then - echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2 - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then : - else - echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2 - can_build_shared=no - fi -fi - -echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6 -$rm conftest* -echo 'main(){return(0);}' > conftest.c -save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $link_static_flag" -echo "$progname:591: checking if $compiler static flag $link_static_flag works" >&5 -if { (eval echo $progname:592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - echo "$ac_t$link_static_flag" 1>&6 -else - echo "$ac_t"none 1>&6 - link_static_flag= -fi -LDFLAGS="$save_LDFLAGS" -$rm conftest* - -if test -z "$LN_S"; then - # Check to see if we can use ln -s, or we need hard links. - echo $ac_n "checking whether ln -s works... $ac_c" 1>&6 - $rm conftestdata - if ln -s X conftestdata 2>/dev/null; then - $rm conftestdata - LN_S="ln -s" - else - LN_S=ln - fi - if test "$LN_S" = "ln -s"; then - echo "$ac_t"yes 1>&6 - else - echo "$ac_t"no 1>&6 - fi -fi - -# Make sure LD is an absolute path. -if test -z "$LD"; then - ac_prog=ld - if test "$with_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6 - echo "$progname:624: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - /* | [A-Za-z]:\\*) - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we are not using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac - elif test "$with_gnu_ld" = yes; then - echo $ac_n "checking for GNU ld... $ac_c" 1>&6 - echo "$progname:642: checking for GNU ld" >&5 - else - echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 - echo "$progname:645: checking for non-GNU ld" >&5 - fi - - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then - LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" - fi - - if test -n "$LD"; then - echo "$ac_t$LD" 1>&6 - else - echo "$ac_t"no 1>&6 - fi - - if test -z "$LD"; then - echo "$progname: error: no acceptable ld found in \$PATH" 1>&2 - exit 1 - fi -fi - -# Check to see if it really is or is not GNU ld. -echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6 -# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - with_gnu_ld=yes -else - with_gnu_ld=no -fi -echo "$ac_t$with_gnu_ld" 1>&6 - -# See if the linker supports building shared libraries. -echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 - -allow_undefined_flag= -no_undefined_flag= -archive_cmds= -old_archive_from_new_cmds= -export_dynamic_flag_spec= -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= - -case "$host_os" in -amigaos* | sunos4*) - # On these operating systems, we should treat GNU ld like the system ld. - gnu_ld_acts_native=yes - ;; -*) - gnu_ld_acts_native=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes && test "$gnu_ld_acts_native" != yes; then - - # See if GNU ld supports shared libraries. - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared ${wl}-soname $wl$soname -o $lib$libobjs' - runpath_var=LD_RUN_PATH - ld_shlibs=yes - else - ld_shlibs=no - fi - - if test "$ld_shlibs" = yes; then - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case "$host_os" in - aix3*) - allow_undefined_flag=unsupported - archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$LD -o $objdir/$soname$libobjs -bE:$lib.exp -T512 -H512 -bM:SRE;$AR cru $lib $objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$with_gcc" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4*) - allow_undefined_flag=unsupported - archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$CC -o $objdir/$soname$libobjs ${wl}-bE:$lib.exp ${wl}-bM:SRE ${wl}-bnoentry;$AR cru $lib $objdir/$soname' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - - amigaos*) - archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib$libobjs /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib$libobjs' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3, at last, uses gcc -shared to do shared libraries. - freebsd3*) - archive_cmds='$CC -shared -o $lib$libobjs' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - archive_cmds='$rm $objdir/$soname;$LD -b +s +b $install_libdir -o $objdir/$soname$libobjs;mv $objdir/$soname $lib' - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib$libobjs' - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - archive_cmds='$LD -shared -o $lib -soname $soname -set_version $verstring$libobjs' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - ;; - - netbsd*) - # Tested with NetBSD 1.2 ld - archive_cmds='$LD -Bshareable -o $lib$libobjs' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - openbsd*) - archive_cmds='$LD -Bshareable -o $lib$libobjs' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def;$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def;$echo DATA >> $objdir/$libname.def;$echo " SINGLE NONSHARED" >> $objdir/$libname.def;$echo EXPORTS >> $objdir/$libname.def;emxexp$libobjs >> $objdir/$libname.def;$CC -Zdll -Zcrtdll -o $lib$libobjs $objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def' - ;; - - osf3* | osf4*) - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} -o $lib -soname $soname -set_version $verstring$libobjs$deplibs' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -o $lib$libobjs' - hardcode_direct=yes - ;; - - solaris2*) - no_undefined_flag=' -z text' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib$libobjs' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - - # Solaris 2 before 2.5 hardcodes -L paths. - case "$host_os" in - solaris2.[0-4]*) - hardcode_minus_L=yes - ;; - esac - ;; - - sunos4*) - if test "$with_gcc" = yes; then - archive_cmds='$CC -shared -o $lib$libobjs' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs' - fi - - if test "$with_gnu_ld" = yes; then - export_dynamic_flag_spec='${wl}-export-dynamic' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib$libobjs' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - can_build_shared=no - ;; - esac -fi -echo "$ac_t$ld_shlibs" 1>&6 - -if test -z "$NM"; then - echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6 - case "$NM" in - /* | [A-Za-z]:\\*) ;; # Let the user override the test with a path. - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -B" - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - NM="$ac_dir/nm -p" - else - NM="$ac_dir/nm" - fi - break - fi - done - IFS="$ac_save_ifs" - test -z "$NM" && NM=nm - ;; - esac - echo "$ac_t$NM" 1>&6 -fi - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRSTU]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \1' - -# Define system-specific variables. -case "$host_os" in -aix*) - symcode='[BCDTU]' - ;; -irix*) - # Cannot use undefined symbols on IRIX because inlined functions mess us up. - symcode='[BCDEGRST]' - ;; -solaris2*) - symcode='[BDTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTUW]' -fi - -# Write the raw and C identifiers. -global_symbol_pipe="sed -n -e 's/^.* $symcode $sympat$/$symxfrm/p'" - -# Check to see that the pipe works correctly. -pipe_works=no -$rm conftest* -cat > conftest.c <&5 -if { (eval echo $progname:972: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.o; then - # Now try to grab the symbols. - nlist=conftest.nm - if { echo "$progname:975: eval \"$NM conftest.o | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.o | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then - - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - wcout=`wc "$nlist" 2>/dev/null` - count=`$echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` - (test "$count" -ge 0) 2>/dev/null || count=-1 - else - rm -f "$nlist"T - count=-1 - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.c -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - sed 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> conftest.c - - cat <> conftest.c -#if defined (__STDC__) && __STDC__ -# define __ptr_t void * -#else -# define __ptr_t char * -#endif - -/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ -int dld_preloaded_symbol_count = $count; - -/* The mapping between symbol names and symbols. */ -struct { - char *name; - __ptr_t address; -} -dld_preloaded_symbols[] = -{ -EOF - sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> conftest.c - cat <<\EOF >> conftest.c - {0, (__ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.o conftestm.o - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS='conftestm.o' - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo $progname:1033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - pipe_works=yes - else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 - fi - LIBS="$save_LIBS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $global_symbol_pipe" >&5 - fi -else - echo "$progname: failed program was:" >&5 - cat conftest.c >&5 -fi -$rm conftest* - -# Do not use the global_symbol_pipe unless it works. -echo "$ac_t$pipe_works" 1>&6 -test "$pipe_works" = yes || global_symbol_pipe= - -# Check hardcoding attributes. -echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && \ - test "$hardcode_minus_L" != no && \ - test "$hardcode_shlibpath_var" != no; then - - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -elif test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" != yes; then - # We cannot hardcode anything. - hardcode_action=unsupported -else - # We can only hardcode existing directories. - hardcode_action=relink -fi -echo "$ac_t$hardcode_action" 1>&6 -test "$hardcode_action" = unsupported && can_build_shared=no - - -reload_flag= -reload_cmds='$LD$reload_flag -o $output$reload_objs' -echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6 -# PORTME Some linker may need a different reload flag. -reload_flag='-r' -echo "$ac_t$reload_flag" -test -n "$reload_flag" && reload_flag=" $reload_flag" - -# PORTME Fill in your ld.so characteristics -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -version_type=none -dynamic_linker="$host_os ld.so" - -echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 -case "$host_os" in -aix3* | aix4*) - version_type=linux - library_names_spec='${libname}${release}.so.$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so.$major' - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -freebsd2* | freebsd3*) - version_type=sunos - library_names_spec='${libname}${release}.so.$versuffix $libname.so' - finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -gnu*) - version_type=sunos - library_names_spec='${libname}${release}.so.$versuffix' - shlibpath_var=LD_LIBRARY_PATH - ;; - -hpux9* | hpux10*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - shlibpath_var=SHLIB_PATH - library_names_spec='${libname}${release}.sl.$versuffix ${libname}${release}.sl.$major $libname.sl' - soname_spec='${libname}${release}.sl.$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=osf - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so.$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so' - soname_spec='${libname}${release}.so.$major' - finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - - if test -f /lib/ld.so.1; then - dynamic_linker='GNU ld.so' - else - # Only the GNU ld.so supports shared libraries on MkLinux. - case "$host_cpu" in - powerpc*) dynamic_linker=no ;; - *) dynamic_linker='Linux ld.so' ;; - esac - fi - ;; - -netbsd* | openbsd*) - version_type=sunos - library_names_spec='${libname}${release}.so.$versuffix' - finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4*) - version_type=osf - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so.$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so.$major' - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris2*) - version_type=linux - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so' - soname_spec='${libname}${release}.so.$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so.$versuffix' - finish_cmds='PATH="$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4.2uw2*) - version_type=linux - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so' - soname_spec='${libname}${release}.so.$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so' - soname_spec='${libname}${release}.so.$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$ac_t$dynamic_linker" -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 - -echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds;\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -esac - -echo "$ac_t$enable_shared" 1>&6 - -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes - -echo "checking whether to build static libraries... $enable_static" 1>&6 - -echo $ac_n "checking for objdir... $ac_c" 1>&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$ac_t$objdir" 1>&6 - -# Copy echo and quote the copy, instead of the original, because it is -# used later. -ltecho="$echo" - -# Now quote all the things that may contain metacharacters. -for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \ - old_LN_S AR CC LD LN_S NM reload_flag reload_cmds wl pic_flag \ - link_static_flag no_builtin_flag export_dynamic_flag_spec \ - libname_spec library_names_spec soname_spec RANLIB \ - old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds postinstall_cmds postuninstall_cmds \ - allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe \ - hardcode_libdir_flag_spec hardcode_libdir_separator; do - - case "$var" in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | archive_cmds | \ - postinstall_cmds | postuninstall_cmds | finish_cmds) - # Double-quote double-evaled strings. - eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\"\`" - ;; - *) - eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`" - ;; - esac -done - -ofile=libtool -trap "$rm $ofile; exit 1" 1 2 15 -echo creating $ofile -$rm $ofile -cat < $ofile -#! /bin/sh - -# libtool - Provide generalized library-building support services. -# Generated automatically by $PROGRAM - GNU $PACKAGE $VERSION -# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. -# -# Copyright (C) 1996-1998 Free Software Foundation, Inc. -# Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This program was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# CC="$old_CC" CFLAGS="$old_CFLAGS" CPPFLAGS="$old_CPPFLAGS" \\ -# LD="$old_LD" NM="$old_NM" RANLIB="$old_RANLIB" LN_S="$old_LN_S" \\ -# $0$ltconfig_args -# -# Compiler and other test output produced by $progname, useful for -# debugging $progname, is in ./config.log if it exists. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi - -# An echo program that does not interpret backslashes. -echo="$ltecho" - -# The version of $progname that generated this script. -LTCONFIG_VERSION="$VERSION" - -# Shell to use when invoking shell scripts. -SHELL=${CONFIG_SHELL-/bin/sh} - -# Whether or not to build libtool libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build old-style libraries. -build_old_libs=$enable_static - -# The host system. -host_alias="$host_alias" -host="$host" - -# The archiver. -AR="$AR" - -# The default C compiler. -CC="$CC" - -# The linker used to build libraries. -LD="$LD" - -# Whether we need hard or soft links. -LN_S="$LN_S" - -# A BSD-compatible nm program. -NM="$NM" - -# The name of the directory that contains temporary libtool files. -objdir="$objdir" - -# How to create reloadable object files. -reload_flag="$reload_flag" -reload_cmds="$reload_cmds" - -# How to pass a linker flag through the compiler. -wl="$wl" - -# Additional compiler flags for building library objects. -pic_flag="$pic_flag" - -# Compiler flag to prevent dynamic linking. -link_static_flag="$link_static_flag" - -# Compiler flag to turn off builtin functions. -no_builtin_flag="$no_builtin_flag" - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec="$export_dynamic_flag_spec" - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec="$libname_spec" - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec="$library_names_spec" - -# The coded name of the library, if different from the real name. -soname_spec="$soname_spec" - -# Commands used to build and install an old-style archive. -RANLIB="$RANLIB" -old_archive_cmds="$old_archive_cmds" -old_postinstall_cmds="$old_postinstall_cmds" -old_postuninstall_cmds="$old_postuninstall_cmds" - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds="$old_archive_from_new_cmds" - -# Commands used to build and install a shared archive. -archive_cmds="$archive_cmds" -postinstall_cmds="$postinstall_cmds" -postuninstall_cmds="$postuninstall_cmds" - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag="$allow_undefined_flag" - -# Flag that forces no undefined symbols. -no_undefined_flag="$no_undefined_flag" - -# Commands used to finish a libtool library installation in a directory. -finish_cmds="$finish_cmds" - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval="$finish_eval" - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe="$global_symbol_pipe" - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec="$hardcode_libdir_flag_spec" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="$hardcode_libdir_separator" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -EOF - -case "$host_os" in -aix3*) - cat <<\EOF >> $ofile -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "${COLLECT_NAMES+set}" != set; then - COLLECT_NAMES= - export COLLECT_NAMES -fi - -EOF - ;; -esac - -# Append the ltmain.sh script. -cat "$ltmain" >> $ofile || (rm -f $ofile; exit 1) - -chmod +x $ofile -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/libjpegtwrp/ltmain.sh b/libjpegtwrp/ltmain.sh deleted file mode 100644 index e9350b3fa..000000000 --- a/libjpegtwrp/ltmain.sh +++ /dev/null @@ -1,2453 +0,0 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. -# -# Copyright (C) 1996-1998 Free Software Foundation, Inc. -# Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# The name of this program. -progname=`$echo "$0" | sed 's%^.*/%%'` -modename="$progname" - -# Constants. -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.2 - -default_mode= -help="Try \`$progname --help' for more information." -magic="%%%MAGIC variable%%%" -mkdir="mkdir" -mv="mv -f" -rm="rm -f" - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LANG+set}" = set; then LANG=C; export LANG; fi - -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - echo "$modename: not configured to build any kind of library" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= - -# Parse our command line options once, thoroughly. -while test $# -gt 0 -do - arg="$1" - shift - - case "$arg" in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case "$arg" in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION" - exit 0 - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --quiet | --silent) - show=: - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case "$nonopt" in - *cc | *++ | gcc* | *-gcc*) - mode=link - for arg - do - case "$arg" in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case "$mode" in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - lastarg= - srcfile="$nonopt" - suppress_output= - - for arg - do - # Accept any command-line options. - case "$arg" in - -o) - $echo "$modename: you cannot specify the output filename with \`-o'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - - # Recognize several different file suffixes. - xform='[cCFSfms]' - case "$libobj" in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case "$libobj" in - *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;; - *) - $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2 - exit 1 - ;; - esac - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - $run $rm $obj $libobj - trap "$run $rm $obj $libobj; exit 1" 1 2 15 - else - $run $rm $libobj - trap "$run $rm $libobj; exit 1" 1 2 15 - fi - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - # All platforms use -DPIC, to notify preprocessed assembler code. - $show "$base_compile$pic_flag -DPIC $srcfile" - if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then : - else - test -n "$obj" && $run $rm $obj - exit 1 - fi - - # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag"; then - $show "$LN_S $obj $libobj" - $run $LN_S $obj $libobj - exit $? - fi - - # Just move the object, then go on to compile the next one - $show "$mv $obj $libobj" - $run $mv $obj $libobj || exit 1 - - # Allow error messages only from the first compilation. - suppress_output=' >/dev/null 2>&1' - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - # Suppress compiler output if we already did a PIC compilation. - $show "$base_compile $srcfile$suppress_output" - if $run eval "$base_compile \$srcfile$suppress_output"; then : - else - $run $rm $obj $libobj - exit 1 - fi - fi - - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - fi - - exit 0 - ;; - - # libtool link mode - link) - modename="$modename: link" - CC="$nonopt" - allow_undefined=yes - compile_command="$CC" - finalize_command="$CC" - - compile_shlibpath= - finalize_shlibpath= - deplibs= - dlfiles= - dlprefiles= - export_dynamic=no - hardcode_libdirs= - libobjs= - link_against_libtool_libs= - ltlibs= - objs= - prev= - prevarg= - release= - rpath= - perm_rpath= - temp_rpath= - vinfo= - - # We need to know -static, to get the right output filenames. - for arg - do - case "$arg" in - -all-static | -static) - if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 - fi - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - for arg - do - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case "$prev" in - dlfiles|dlprefiles) - case "$arg" in - *.la | *.lo) ;; # We handle these cases below. - *) - dlprefiles="$dlprefiles $arg" - test "$prev" = dlfiles && dlfiles="$dlfiles $arg" - prev= - ;; - esac - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath) - rpath="$rpath $arg" - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi - - prevarg="$arg" - - case "$arg" in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - if test "$export_dynamic" != yes; then - export_dynamic=yes - if test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - else - arg= - fi - - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - fi - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'` - case "$dir" in - /* | [A-Za-z]:\\*) - # Add the corresponding hardcode_libdir_flag, if it is not identical. - ;; - *) - $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2 - exit 1 - ;; - esac - deplibs="$deplibs $arg" - ;; - - -l*) deplibs="$deplibs $arg" ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - - *.o | *.a) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes; then - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'` - prev= - fi - libobjs="$libobjs $arg" - ;; - - *.la) - # A libtool-controlled library. - - dlname= - libdir= - library_names= - old_library= - - # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then : - else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 - exit 1 - fi - - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$libdir"; then - $echo "$modename: \`$arg' contains no -rpath information" 1>&2 - exit 1 - fi - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 - exit 1 - fi - - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - - # This library was specified with -dlopen. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test -z "$dlname"; then - # If there is no dlname, we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue - fi - fi - - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" - else - dlprefiles="$dlprefiles $dir/$linklib" - fi - prev= - fi - - if test "$build_libtool_libs" = yes && test -n "$library_names"; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # This is the magic to use -rpath. - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - # Put the magic libdir with the hardcode flag. - hardcode_libdirs="$libdir" - libdir="@HARDCODE_LIBDIRS@" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - libdir= - fi - fi - - if test -n "$libdir"; then - eval flag=\"$hardcode_libdir_flag_spec\" - - compile_command="$compile_command $flag" - finalize_command="$finalize_command $flag" - fi - elif test -n "$runpath_var"; then - # Do the same for the permanent run path. - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - - - case "$hardcode_action" in - immediate) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - elif test "$hardcode_minus_L" = no; then - compile_command="$compile_command -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - compile_shlibpath="$compile_shlibpath$dir:" - compile_command="$compile_command -l$name" - fi - ;; - - relink) - # We need an absolute path. - case "$dir" in - /* | [A-Za-z]:\\*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 - fi - dir="$absdir" - ;; - esac - - if test "$hardcode_direct" = yes; then - compile_command="$compile_command $dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - compile_command="$compile_command -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - compile_shlibpath="$compile_shlibpath$dir:" - compile_command="$compile_command -l$name" - fi - ;; - - *) - $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2 - exit 1 - ;; - esac - - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - finalize_command="$finalize_command -L$libdir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - finalize_shlibpath="$finalize_shlibpath$libdir:" - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - finalize_command="$finalize_command -L$libdir -l$name" - fi - else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 - fi - - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" - else - compile_command="$compile_command -L$dir -l$name" - finalize_command="$finalize_command -L$dir -l$name" - fi - fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - esac - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$vinfo" && test -n "$release"; then - $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - oldlib= - oldobjs= - case "$output" in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - */* | *\\*) - $echo "$modename: output file \`$output' must have no directory components" 1>&2 - exit 1 - ;; - - *.a) - # Now set the variables for building old libraries. - build_libtool_libs=no - build_old_libs=yes - oldlib="$output" - $show "$rm $oldlib" - $run $rm $oldlib - ;; - - *.la) - # Make sure we only generate libraries of the form `libNAME.la'. - case "$output" in - lib*) ;; - *) - $echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - current=0 - revision=0 - age=0 - - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 - fi - - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2 - exit 1 - fi - - if test -n "$dlfiles$dlprefiles"; then - $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2 - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test -z "$rpath"; then - $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - set dummy $rpath - if test $# -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - # Parse the version information argument. - IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' - set dummy $vinfo - IFS="$save_ifs" - - if test -n "$5"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - test -n "$2" && current="$2" - test -n "$3" && revision="$3" - test -n "$4" && age="$4" - - # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test $age -gt $current; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - version_vars="version_type current age revision" - case "$version_type" in - none) ;; - - linux) - version_vars="$version_vars major versuffix" - major=`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - version_vars="$version_vars versuffix verstring" - major=`expr $current - $age` - versuffix="$current.$age.$revision" - verstring="$versuffix" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test $loop != 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - version_vars="$version_vars major versuffix" - major="$current" - versuffix="$current.$revision" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Create the output directory, or remove our outputs if we need to. - if test -d $objdir; then - $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*" - $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.* - else - $show "$mkdir $objdir" - $run $mkdir $objdir - status=$? - if test $status -eq 0 || test -d $objdir; then : - else - exit $status - fi - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - # Add libc to deplibs on all systems. - dependency_libs="$deplibs" - deplibs="$deplibs -lc" - - if test "$build_libtool_libs" = yes; then - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - lib="$objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are PIC. - test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'` - - # Do each of the archive commands. - eval cmds=\"$archive_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Create links to the real library. - for linkname in $linknames; do - $show "(cd $objdir && $LN_S $realname $linkname)" - $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $? - done - - # If -export-dynamic was specified, set the dlname. - if test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - - # Now set the variables for building old libraries. - oldlib="$objdir/$libname.a" - ;; - - *.lo | *.o) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles"; then - $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2 - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2 - fi - - case "$output" in - *.lo) - if test -n "$objs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Create the old-style object. - reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'` - - output="$obj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - test -z "$libobj" && exit 0 - - if test "$build_libtool_libs" != yes; then - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs" - output="$libobj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - else - # Just create a symlink. - $show "$LN_S $obj $libobj" - $run $LN_S $obj $libobj || exit 1 - fi - - exit 0 - ;; - - *) - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2 - fi - - if test -n "$rpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - # Put the magic libdir with the hardcode flag. - hardcode_libdirs="$libdir" - libdir="@HARDCODE_LIBDIRS@" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - libdir= - fi - fi - - if test -n "$libdir"; then - eval flag=\"$hardcode_libdir_flag_spec\" - - compile_command="$compile_command $flag" - finalize_command="$finalize_command $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - fi - - # Substitute the hardcoded libdirs into the compile commands. - if test -n "$hardcode_libdir_separator"; then - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"` - fi - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'` - finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'` - fi - - if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${output}S.c" - else - dlsyms= - fi - - if test -n "$dlsyms"; then - # Add our own program objects to the preloaded list. - dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'` - - # Discover the nlist of each of the dlfiles. - nlist="$objdir/${output}.nm" - - if test -d $objdir; then - $show "$rm $nlist ${nlist}T" - $run $rm "$nlist" "${nlist}T" - else - $show "$mkdir $objdir" - $run $mkdir $objdir - status=$? - if test $status -eq 0 || test -d $objdir; then : - else - exit $status - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - # Parse the name list into a source file. - $show "creating $objdir/$dlsyms" - if test -z "$run"; then - # Make sure we at least have an empty file. - test -f "$nlist" || : > "$nlist" - - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - wcout=`wc "$nlist" 2>/dev/null` - count=`echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` - (test "$count" -ge 0) 2>/dev/null || count=-1 - else - $rm "$nlist"T - count=-1 - fi - - case "$dlsyms" in - "") ;; - *.c) - $echo > "$objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define dld_preloaded_symbol_count some_other_symbol -#define dld_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test -f "$nlist"; then - sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms" - else - echo '/* NONE */' >> "$objdir/$dlsyms" - fi - - $echo >> "$objdir/$dlsyms" "\ - -#undef dld_preloaded_symbol_count -#undef dld_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define __ptr_t void * -#else -# define __ptr_t char * -#endif - -/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ -int dld_preloaded_symbol_count = $count; - -/* The mapping between symbol names and symbols. */ -struct { - char *name; - __ptr_t address; -} -dld_preloaded_symbols[] = -{\ -" - - if test -f "$nlist"; then - sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms" - fi - - $echo >> "$objdir/$dlsyms" "\ - {0, (__ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif\ -" - ;; - - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - fi - - # Now compile the dynamic symbol file. - $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")" - $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $? - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"` - elif test "$export_dynamic" != yes; then - test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2 - else - # We keep going just in case the user didn't refer to - # dld_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - - # We have no uninstalled library dependencies, so finalize right now. - $show "$compile_command" - $run eval "$compile_command" - exit $? - fi - - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'` - finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'` - - # Create the binary in the object directory, then wrap it. - if test -d $objdir; then : - else - $show "$mkdir $objdir" - $run $mkdir $objdir - status=$? - if test $status -eq 0 || test -d $objdir; then : - else - exit $status - fi - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case "$dir" in - /* | [A-Za-z]:\\*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - # Delete the old output file. - $run $rm $output - - if test -n "$compile_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command" - finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command" - fi - - case "$hardcode_action" in - relink) - # AGH! Flame the AIX and HP-UX people for me, will ya? - $echo "$modename: warning: using a buggy system linker" 1>&2 - $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2 - ;; - esac - - $show "$compile_command" - $run eval "$compile_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the finalize command for shipping. - finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"` - - # Quote $echo for shipping. - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! /bin/sh - -# $output - temporary wrapper script for $objdir/$output -# Generated by ltmain.sh - GNU $PACKAGE $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of \``pwd`'. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - link_against_libtool_libs='$link_against_libtool_libs' - finalize_command=\"$finalize_command\" -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" = \"$magic\"; then : - else - echo=\"$qecho\" - file=\"\$0\" - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" - - progdir=\"\$thisdir/$objdir\" - program='$output' - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\` - - export $shlibpath_var -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. - - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} - - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - if test "$build_old_libs" = "yes"; then - # Transform .lo files to .o files. - oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'` - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - eval cmds=\"$old_archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Now create the libtool archive. - case "$output" in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.a" - - $show "creating $output" - - # Only create the output if not a dry run. - if test -z "$run"; then - $echo > $output "\ -# $output - a libtool library file -# Generated by ltmain.sh - GNU $PACKAGE $VERSION - -# The name that we can dlopen(3). -dlname='$dlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $objdir && $LN_S ../$output $output)" - $run eval "(cd $objdir && $LN_S ../$output $output)" || exit 1 - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional /bin/sh argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL"; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir= - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case "$arg" in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test -n "$isdir"; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test $# -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case "$destdir" in - /* | [A-Za-z]:\\*) ;; - *) - for file in $files; do - case "$file" in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case "$file" in - *.a) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? - test "X$dlname" = "X$realname" && dlname= - - if test $# -gt 0; then - # Delete the old symlinks. - rmcmd="$rm" - for linkname - do - rmcmd="$rmcmd $destdir/$linkname" - done - $show "$rmcmd" - $run $rmcmd - - # ... and create new ones. - for linkname - do - test "X$dlname" = "X$linkname" && dlname= - $show "(cd $destdir && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $LN_S $realname $linkname)" - done - fi - - if test -n "$dlname"; then - # Install the dynamically-loadable library. - $show "$install_prog $dir/$dlname $destdir/$dlname" - $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $? - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - $show "$install_prog $file $destdir/$name" - $run eval "$install_prog $file $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case "$destfile" in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'` - ;; - *.o) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then - link_against_libtool_libs= - finalize_command= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Check the variables that should have been set. - if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $link_against_libtool_libs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case "$lib" in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" - if test -z "$libdir"; then - $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2 - elif test -f "$libfile"; then : - else - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - if test "$hardcode_action" = relink; then - if test "$finalize" = yes; then - $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2 - $show "$finalize_command" - if $run eval "$finalize_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue - fi - file="$objdir/$file"T - else - $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - $show "$install_prog$stripme $file $dest" - $run eval "$install_prog\$stripme \$file \$dest" || exit $? - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec $SHELL $0 --finish$current_libdirs - exit 1 - fi - - exit 0 - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" - fi - done - fi - - echo "------------------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "To link against installed libraries in a given directory, LIBDIR," - echo "you must use the \`-LLIBDIR' flag during linking." - echo - echo " You will also need to do one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "------------------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test -f "$file"; then : - else - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case "$file" in - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case "$file" in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - - # Now actually exec the command. - eval "exec \$cmd$args" - - $echo "$modename: cannot exec \$cmd$args" - exit 1 - else - # Display what would be done. - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" - rm="$nonopt" - files= - - for arg - do - case "$arg" in - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - rmfiles="$file" - - case "$name" in - *.la) - # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $dir/$n" - test "X$n" = "X$dlname" && dlname= - done - test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname" - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" - - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS=';' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - # FIXME: should reinstall the best remaining shared library. - fi - ;; - - *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'` - rmfiles="$rmfiles $dir/$oldobj" - fi - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - - *) - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - esac - done - exit 0 - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 -fi # test -z "$show_help" - -# We need to display help for each of the modes. -case "$mode" in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - --n, --dry-run display commands without modifying any files - --features display configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --version print version information - -MODE must be one of the following: - - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to dld_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only -library objects (\`.lo' files) may be specified, and \`-rpath' is required. - -If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar' -and \`ranlib'. - -If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is -created, otherwise an executable program is created." - ;; - -uninstall) - $echo -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/libjpegtwrp/makcjpeg.st b/libjpegtwrp/makcjpeg.st deleted file mode 100644 index fc72c8982..000000000 --- a/libjpegtwrp/makcjpeg.st +++ /dev/null @@ -1,38 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de), -; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de), -; and Guido Vollbeding (guivol@esc.de). -; -; To use this file, rename it to cjpeg.prj. -; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -cjpeg.ttp -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -= -; * * * * List of modules * * * * -pcstart.o -cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) -cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -libjpeg.lib ; built by libjpeg.prj -pcfltlib.lib ; floating point library -; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED -pcstdlib.lib ; standard library -pcextlib.lib ; extended library diff --git a/libjpegtwrp/makdjpeg.st b/libjpegtwrp/makdjpeg.st deleted file mode 100644 index 322672631..000000000 --- a/libjpegtwrp/makdjpeg.st +++ /dev/null @@ -1,38 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de), -; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de), -; and Guido Vollbeding (guivol@esc.de). -; -; To use this file, rename it to djpeg.prj. -; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -djpeg.ttp -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -= -; * * * * List of modules * * * * -pcstart.o -djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) -cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -libjpeg.lib ; built by libjpeg.prj -pcfltlib.lib ; floating point library -; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED -pcstdlib.lib ; standard library -pcextlib.lib ; extended library diff --git a/libjpegtwrp/makeapps.ds b/libjpegtwrp/makeapps.ds deleted file mode 100644 index bedd038a3..000000000 --- a/libjpegtwrp/makeapps.ds +++ /dev/null @@ -1,828 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -!IF "$(CFG)" == "" -CFG=cjpeg - Win32 -!MESSAGE No configuration specified. Defaulting to cjpeg - Win32. -!ENDIF - -!IF "$(CFG)" != "cjpeg - Win32" && "$(CFG)" != "djpeg - Win32" &&\ - "$(CFG)" != "jpegtran - Win32" && "$(CFG)" != "rdjpgcom - Win32" &&\ - "$(CFG)" != "wrjpgcom - Win32" -!MESSAGE Invalid configuration "$(CFG)" specified. -!MESSAGE You can specify a configuration when running NMAKE on this makefile -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "apps.mak" CFG="cjpeg - Win32" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "cjpeg - Win32" (based on "Win32 (x86) Console Application") -!MESSAGE "djpeg - Win32" (based on "Win32 (x86) Console Application") -!MESSAGE "jpegtran - Win32" (based on "Win32 (x86) Console Application") -!MESSAGE "rdjpgcom - Win32" (based on "Win32 (x86) Console Application") -!MESSAGE "wrjpgcom - Win32" (based on "Win32 (x86) Console Application") -!MESSAGE -!ERROR An invalid configuration is specified. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF -################################################################################ -# Begin Project -# PROP Target_Last_Scanned "cjpeg - Win32" -CPP=cl.exe -RSC=rc.exe - -!IF "$(CFG)" == "cjpeg - Win32" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "cjpeg\Release" -# PROP BASE Intermediate_Dir "cjpeg\Release" -# PROP BASE Target_Dir "cjpeg" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "cjpeg\Release" -# PROP Intermediate_Dir "cjpeg\Release" -# PROP Target_Dir "cjpeg" -OUTDIR=.\cjpeg\Release -INTDIR=.\cjpeg\Release - -ALL : "$(OUTDIR)\cjpeg.exe" - -CLEAN : - -@erase "$(INTDIR)\cjpeg.obj" - -@erase "$(INTDIR)\rdppm.obj" - -@erase "$(INTDIR)\rdgif.obj" - -@erase "$(INTDIR)\rdtarga.obj" - -@erase "$(INTDIR)\rdrle.obj" - -@erase "$(INTDIR)\rdbmp.obj" - -@erase "$(INTDIR)\rdswitch.obj" - -@erase "$(INTDIR)\cdjpeg.obj" - -@erase "$(OUTDIR)\cjpeg.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\ - /Fp"$(INTDIR)/cjpeg.pch" /YX /Fo"$(INTDIR)/" /c -CPP_OBJS=.\cjpeg\Release/ -CPP_SBRS=.\. -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -BSC32_FLAGS=/nologo /o"$(OUTDIR)/cjpeg.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\ - odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\ - /pdb:"$(OUTDIR)/cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)/cjpeg.exe" -LINK32_OBJS= \ - "$(INTDIR)\cjpeg.obj" \ - "$(INTDIR)\rdppm.obj" \ - "$(INTDIR)\rdgif.obj" \ - "$(INTDIR)\rdtarga.obj" \ - "$(INTDIR)\rdrle.obj" \ - "$(INTDIR)\rdbmp.obj" \ - "$(INTDIR)\rdswitch.obj" \ - "$(INTDIR)\cdjpeg.obj" \ - - -"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -!ELSEIF "$(CFG)" == "djpeg - Win32" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "djpeg\Release" -# PROP BASE Intermediate_Dir "djpeg\Release" -# PROP BASE Target_Dir "djpeg" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "djpeg\Release" -# PROP Intermediate_Dir "djpeg\Release" -# PROP Target_Dir "djpeg" -OUTDIR=.\djpeg\Release -INTDIR=.\djpeg\Release - -ALL : "$(OUTDIR)\djpeg.exe" - -CLEAN : - -@erase "$(INTDIR)\djpeg.obj" - -@erase "$(INTDIR)\wrppm.obj" - -@erase "$(INTDIR)\wrgif.obj" - -@erase "$(INTDIR)\wrtarga.obj" - -@erase "$(INTDIR)\wrrle.obj" - -@erase "$(INTDIR)\wrbmp.obj" - -@erase "$(INTDIR)\rdcolmap.obj" - -@erase "$(INTDIR)\cdjpeg.obj" - -@erase "$(OUTDIR)\djpeg.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\ - /Fp"$(INTDIR)/djpeg.pch" /YX /Fo"$(INTDIR)/" /c -CPP_OBJS=.\djpeg\Release/ -CPP_SBRS=.\. -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -BSC32_FLAGS=/nologo /o"$(OUTDIR)/djpeg.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\ - odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\ - /pdb:"$(OUTDIR)/djpeg.pdb" /machine:I386 /out:"$(OUTDIR)/djpeg.exe" -LINK32_OBJS= \ - "$(INTDIR)\djpeg.obj" \ - "$(INTDIR)\wrppm.obj" \ - "$(INTDIR)\wrgif.obj" \ - "$(INTDIR)\wrtarga.obj" \ - "$(INTDIR)\wrrle.obj" \ - "$(INTDIR)\wrbmp.obj" \ - "$(INTDIR)\rdcolmap.obj" \ - "$(INTDIR)\cdjpeg.obj" \ - - -"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -!ELSEIF "$(CFG)" == "jpegtran - Win32" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "jpegtran\Release" -# PROP BASE Intermediate_Dir "jpegtran\Release" -# PROP BASE Target_Dir "jpegtran" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "jpegtran\Release" -# PROP Intermediate_Dir "jpegtran\Release" -# PROP Target_Dir "jpegtran" -OUTDIR=.\jpegtran\Release -INTDIR=.\jpegtran\Release - -ALL : "$(OUTDIR)\jpegtran.exe" - -CLEAN : - -@erase "$(INTDIR)\jpegtran.obj" - -@erase "$(INTDIR)\rdswitch.obj" - -@erase "$(INTDIR)\cdjpeg.obj" - -@erase "$(INTDIR)\transupp.obj" - -@erase "$(OUTDIR)\jpegtran.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\ - /Fp"$(INTDIR)/jpegtran.pch" /YX /Fo"$(INTDIR)/" /c -CPP_OBJS=.\jpegtran\Release/ -CPP_SBRS=.\. -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -BSC32_FLAGS=/nologo /o"$(OUTDIR)/jpegtran.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\ - odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\ - /pdb:"$(OUTDIR)/jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)/jpegtran.exe" -LINK32_OBJS= \ - "$(INTDIR)\jpegtran.obj" \ - "$(INTDIR)\rdswitch.obj" \ - "$(INTDIR)\cdjpeg.obj" \ - "$(INTDIR)\transupp.obj" \ - - -"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -!ELSEIF "$(CFG)" == "rdjpgcom - Win32" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "rdjpgcom\Release" -# PROP BASE Intermediate_Dir "rdjpgcom\Release" -# PROP BASE Target_Dir "rdjpgcom" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "rdjpgcom\Release" -# PROP Intermediate_Dir "rdjpgcom\Release" -# PROP Target_Dir "rdjpgcom" -OUTDIR=.\rdjpgcom\Release -INTDIR=.\rdjpgcom\Release - -ALL : "$(OUTDIR)\rdjpgcom.exe" - -CLEAN : - -@erase "$(INTDIR)\rdjpgcom.obj" - -@erase "$(OUTDIR)\rdjpgcom.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\ - /Fp"$(INTDIR)/rdjpgcom.pch" /YX /Fo"$(INTDIR)/" /c -CPP_OBJS=.\rdjpgcom\Release/ -CPP_SBRS=.\. -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -BSC32_FLAGS=/nologo /o"$(OUTDIR)/rdjpgcom.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\ - odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\ - /pdb:"$(OUTDIR)/rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)/rdjpgcom.exe" -LINK32_OBJS= \ - "$(INTDIR)\rdjpgcom.obj" - -"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -!ELSEIF "$(CFG)" == "wrjpgcom - Win32" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "wrjpgcom\Release" -# PROP BASE Intermediate_Dir "wrjpgcom\Release" -# PROP BASE Target_Dir "wrjpgcom" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "wrjpgcom\Release" -# PROP Intermediate_Dir "wrjpgcom\Release" -# PROP Target_Dir "wrjpgcom" -OUTDIR=.\wrjpgcom\Release -INTDIR=.\wrjpgcom\Release - -ALL : "$(OUTDIR)\wrjpgcom.exe" - -CLEAN : - -@erase "$(INTDIR)\wrjpgcom.obj" - -@erase "$(OUTDIR)\wrjpgcom.exe" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c -CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\ - /Fp"$(INTDIR)/wrjpgcom.pch" /YX /Fo"$(INTDIR)/" /c -CPP_OBJS=.\wrjpgcom\Release/ -CPP_SBRS=.\. -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -BSC32_FLAGS=/nologo /o"$(OUTDIR)/wrjpgcom.bsc" -BSC32_SBRS= \ - -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 -LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\ - odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\ - /pdb:"$(OUTDIR)/wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)/wrjpgcom.exe" -LINK32_OBJS= \ - "$(INTDIR)\wrjpgcom.obj" - -"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) - $(LINK32) @<< - $(LINK32_FLAGS) $(LINK32_OBJS) -<< - -!ENDIF - -.c{$(CPP_OBJS)}.obj: - $(CPP) $(CPP_PROJ) $< - -.cpp{$(CPP_OBJS)}.obj: - $(CPP) $(CPP_PROJ) $< - -.cxx{$(CPP_OBJS)}.obj: - $(CPP) $(CPP_PROJ) $< - -.c{$(CPP_SBRS)}.sbr: - $(CPP) $(CPP_PROJ) $< - -.cpp{$(CPP_SBRS)}.sbr: - $(CPP) $(CPP_PROJ) $< - -.cxx{$(CPP_SBRS)}.sbr: - $(CPP) $(CPP_PROJ) $< - -################################################################################ -# Begin Target - -# Name "cjpeg - Win32" - -!IF "$(CFG)" == "cjpeg - Win32" - -!ENDIF - -################################################################################ -# Begin Source File - -SOURCE="cjpeg.c" -DEP_CPP_CJPEG=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - "jversion.h"\ - - -"$(INTDIR)\cjpeg.obj" : $(SOURCE) $(DEP_CPP_CJPEG) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="cdjpeg.c" -DEP_CPP_CDJPE=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdswitch.c" -DEP_CPP_RDSWI=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdswitch.obj" : $(SOURCE) $(DEP_CPP_RDSWI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdppm.c" -DEP_CPP_RDPPM=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdppm.obj" : $(SOURCE) $(DEP_CPP_RDPPM) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdgif.c" -DEP_CPP_RDGIF=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdgif.obj" : $(SOURCE) $(DEP_CPP_RDGIF) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdtarga.c" -DEP_CPP_RDTAR=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdtarga.obj" : $(SOURCE) $(DEP_CPP_RDTAR) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdbmp.c" -DEP_CPP_RDBMP=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdbmp.obj" : $(SOURCE) $(DEP_CPP_RDBMP) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdrle.c" -DEP_CPP_RDRLE=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdrle.obj" : $(SOURCE) $(DEP_CPP_RDRLE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -# End Target -################################################################################ -# Begin Target - -# Name "djpeg - Win32" - -!IF "$(CFG)" == "djpeg - Win32" - -!ENDIF - -################################################################################ -# Begin Source File - -SOURCE="djpeg.c" -DEP_CPP_DJPEG=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - "jversion.h"\ - - -"$(INTDIR)\djpeg.obj" : $(SOURCE) $(DEP_CPP_DJPEG) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="cdjpeg.c" -DEP_CPP_CDJPE=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdcolmap.c" -DEP_CPP_RDCOL=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdcolmap.obj" : $(SOURCE) $(DEP_CPP_RDCOL) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="wrppm.c" -DEP_CPP_WRPPM=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\wrppm.obj" : $(SOURCE) $(DEP_CPP_WRPPM) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="wrgif.c" -DEP_CPP_WRGIF=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\wrgif.obj" : $(SOURCE) $(DEP_CPP_WRGIF) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="wrtarga.c" -DEP_CPP_WRTAR=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\wrtarga.obj" : $(SOURCE) $(DEP_CPP_WRTAR) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="wrbmp.c" -DEP_CPP_WRBMP=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\wrbmp.obj" : $(SOURCE) $(DEP_CPP_WRBMP) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="wrrle.c" -DEP_CPP_WRRLE=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\wrrle.obj" : $(SOURCE) $(DEP_CPP_WRRLE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -# End Target -################################################################################ -# Begin Target - -# Name "jpegtran - Win32" - -!IF "$(CFG)" == "jpegtran - Win32" - -!ENDIF - -################################################################################ -# Begin Source File - -SOURCE="jpegtran.c" -DEP_CPP_JPEGT=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - "transupp.h"\ - "jversion.h"\ - - -"$(INTDIR)\jpegtran.obj" : $(SOURCE) $(DEP_CPP_JPEGT) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="cdjpeg.c" -DEP_CPP_CDJPE=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="rdswitch.c" -DEP_CPP_RDSWI=\ - "cdjpeg.h"\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - "cderror.h"\ - - -"$(INTDIR)\rdswitch.obj" : $(SOURCE) $(DEP_CPP_RDSWI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="transupp.c" -DEP_CPP_TRANS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "transupp.h"\ - - -"$(INTDIR)\transupp.obj" : $(SOURCE) $(DEP_CPP_TRANS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -# End Target -################################################################################ -# Begin Target - -# Name "rdjpgcom - Win32" - -!IF "$(CFG)" == "rdjpgcom - Win32" - -!ENDIF - -################################################################################ -# Begin Source File - -SOURCE="rdjpgcom.c" -DEP_CPP_RDJPG=\ - "jinclude.h"\ - "jconfig.h"\ - - -"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) $(DEP_CPP_RDJPG) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -# End Target -################################################################################ -# Begin Target - -# Name "wrjpgcom - Win32" - -!IF "$(CFG)" == "wrjpgcom - Win32" - -!ENDIF - -################################################################################ -# Begin Source File - -SOURCE="wrjpgcom.c" -DEP_CPP_WRJPG=\ - "jinclude.h"\ - "jconfig.h"\ - - -"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) $(DEP_CPP_WRJPG) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -# End Target -# End Project -################################################################################ - diff --git a/libjpegtwrp/makefile.ansi b/libjpegtwrp/makefile.ansi deleted file mode 100644 index 829191359..000000000 --- a/libjpegtwrp/makefile.ansi +++ /dev/null @@ -1,214 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is suitable for Unix-like systems with ANSI-capable compilers. -# If you have a non-ANSI compiler, makefile.unix is a better starting point. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= cc - -# You may need to adjust these cc options: -CFLAGS= -O -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -LDFLAGS= - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= - -# Put here the object file name for the correct system-dependent memory -# manager file. For Unix this is usually jmemnobs.o, but you may want -# to use jmemansi.o or jmemname.o if you have limited swap space. -SYSDEPMEM= jmemnobs.o - -# miscellaneous OS-dependent stuff -# linker -LN= $(CC) -# file deletion command -RM= rm -f -# library (.a) file creation command -AR= ar rc -# second step in .a creation (use "touch" if not needed) -AR2= ranlib - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \ - jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \ - jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \ - jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \ - jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \ - jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \ - jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.a -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom - -libjpeg.a: $(LIBOBJECTS) - $(RM) libjpeg.a - $(AR) libjpeg.a $(LIBOBJECTS) - $(AR2) libjpeg.a - -cjpeg: $(COBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS) - -djpeg: $(DOBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS) - -jpegtran: $(TROBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS) - -rdjpgcom: rdjpgcom.o - $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) - -wrjpgcom: wrjpgcom.o - $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -clean: - $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom - $(RM) core testout* - -test: cjpeg djpeg jpegtran - $(RM) testout* - ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - ./cjpeg -dct int -outfile testout.jpg testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - ./jpegtran -outfile testoutt.jpg testprog.jpg - cmp testimg.ppm testout.ppm - cmp testimg.bmp testout.bmp - cmp testimg.jpg testout.jpg - cmp testimg.ppm testoutp.ppm - cmp testimgp.jpg testoutp.jpg - cmp testorig.jpg testoutt.jpg - - -jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makefile.bcc b/libjpegtwrp/makefile.bcc deleted file mode 100644 index a1cfcde66..000000000 --- a/libjpegtwrp/makefile.bcc +++ /dev/null @@ -1,285 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is suitable for Borland C on MS-DOS or OS/2. -# It works with Borland C++ for DOS, revision 3.0 or later, -# and has been tested with Borland C++ for OS/2. -# Watch out for optimization bugs in the OS/2 compilers --- see notes below! -# Thanks to Tom Wright and Ge' Weijers (original DOS) and -# Ken Porter (OS/2) for this file. - -# Read installation instructions before saying "make" !! - -# Are we under DOS or OS/2? -!if !$d(DOS) && !$d(OS2) -!if $d(__OS2__) -OS2=1 -!else -DOS=1 -!endif -!endif - -# The name of your C compiler: -CC= bcc - -# You may need to adjust these cc options: -!if $d(DOS) -CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch -!else -CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch -!endif -# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z). -# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now. -# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all. -# -mm selects medium memory model (near data, far code pointers; DOS only!) -# -w-par suppresses warnings about unused function parameters -# -w-stu suppresses warnings about incomplete structures -# -w-ccc suppresses warnings about compile-time-constant conditions -# -w-rch suppresses warnings about unreachable code -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -!if $d(DOS) -LDFLAGS= -mm -# memory model option here must match CFLAGS! -!else -LDFLAGS= -# -lai full-screen app -# -lc case-significant link -!endif - -# Put here the object file name for the correct system-dependent memory -# manager file. -# For DOS, we recommend jmemdos.c and jmemdosa.asm. -# For OS/2, we recommend jmemnobs.c (flat memory!) -# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. -!if $d(DOS) -SYSDEPMEM= jmemdos.obj jmemdosa.obj -SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj -!else -SYSDEPMEM= jmemnobs.obj -SYSDEPMEMLIB= +jmemnobs.obj -!endif - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \ - jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \ - jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \ - jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \ - jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \ - jquant1.obj jquant2.obj jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) - - del libjpeg.lib - tlib libjpeg.lib /E /C @&&| -+jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj +jdatadst.obj & -+jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj +jcprepct.obj & -+jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj & -+jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & -+jdapistd.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj & -+jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj +jdcoefct.obj & -+jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & -+jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj & -+jdmerge.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & -$(SYSDEPMEMLIB) -| - -cjpeg.exe: $(COBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib - -djpeg.exe: $(DOBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib - -rdjpgcom.exe: rdjpgcom.c -!if $d(DOS) - $(CC) -ms -O rdjpgcom.c -!else - $(CC) $(CFLAGS) rdjpgcom.c -!endif - -# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk -wrjpgcom.exe: wrjpgcom.c -!if $d(DOS) - $(CC) -ml -O wrjpgcom.c -!else - $(CC) $(CFLAGS) wrjpgcom.c -!endif - -# This "{}" syntax allows Borland Make to "batch" source files. -# In this way, each run of the compiler can build many modules. -.c.obj: - $(CC) $(CFLAGS) -c{ $<} - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -clean: - - del *.obj - - del libjpeg.lib - - del cjpeg.exe - - del djpeg.exe - - del jpegtran.exe - - del rdjpgcom.exe - - del wrjpgcom.exe - - del testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe - - del testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg -!if $d(DOS) - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg -!else - echo n > n.tmp - comp testimg.ppm testout.ppm < n.tmp - comp testimg.bmp testout.bmp < n.tmp - comp testimg.jpg testout.jpg < n.tmp - comp testimg.ppm testoutp.ppm < n.tmp - comp testimgp.jpg testoutp.jpg < n.tmp - comp testorig.jpg testoutt.jpg < n.tmp - del n.tmp -!endif - - -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -jmemdosa.obj: jmemdosa.asm - tasm /mx jmemdosa.asm diff --git a/libjpegtwrp/makefile.cfg b/libjpegtwrp/makefile.cfg deleted file mode 100644 index f25e42e3e..000000000 --- a/libjpegtwrp/makefile.cfg +++ /dev/null @@ -1,319 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# makefile.cfg is edited by configure to produce a custom Makefile. - -# Read installation instructions before saying "make" !! - -# For compiling with source and object files in different directories. -srcdir = @srcdir@ -VPATH = @srcdir@ - -# Where to install the programs and man pages. -prefix = @prefix@ -exec_prefix = @exec_prefix@ -bindir = $(exec_prefix)/bin -libdir = $(exec_prefix)/lib -includedir = $(prefix)/include -binprefix = -manprefix = -manext = 1 -mandir = $(prefix)/man/man$(manext) - -# The name of your C compiler: -CC= @CC@ - -# You may need to adjust these cc options: -CFLAGS= @CFLAGS@ @CPPFLAGS@ @INCLUDEFLAGS@ -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. -# However, any special defines for ansi2knr.c may be included here: -ANSI2KNRFLAGS= @ANSI2KNRFLAGS@ - -# Link-time cc options: -LDFLAGS= @LDFLAGS@ - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= @LIBS@ - -# If using GNU libtool, LIBTOOL references it; if not, LIBTOOL is empty. -LIBTOOL = @LIBTOOL@ -# $(O) expands to "lo" if using libtool, plain "o" if not. -# Similarly, $(A) expands to "la" or "a". -O = @O@ -A = @A@ - -# Library version ID; libtool uses this for the shared library version number. -# Note: we suggest this match the macro of the same name in jpeglib.h. -JPEG_LIB_VERSION = @JPEG_LIB_VERSION@ - -# Put here the object file name for the correct system-dependent memory -# manager file. For Unix this is usually jmemnobs.o, but you may want -# to use jmemansi.o or jmemname.o if you have limited swap space. -SYSDEPMEM= @MEMORYMGR@ - -# miscellaneous OS-dependent stuff -SHELL= /bin/sh -# linker -LN= @LN@ -# file deletion command -RM= rm -f -# directory creation command -MKDIR= mkdir -# library (.a) file creation command -AR= ar rc -# second step in .a creation (use "touch" if not needed) -AR2= @RANLIB@ -# installation program -INSTALL= @INSTALL@ -INSTALL_PROGRAM= @INSTALL_PROGRAM@ -INSTALL_LIB= @INSTALL_LIB@ -INSTALL_DATA= @INSTALL_DATA@ - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.$(O) jutils.$(O) jerror.$(O) jmemmgr.$(O) $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.$(O) jcapistd.$(O) jctrans.$(O) jcparam.$(O) \ - jdatadst.$(O) jcinit.$(O) jcmaster.$(O) jcmarker.$(O) jcmainct.$(O) \ - jcprepct.$(O) jccoefct.$(O) jccolor.$(O) jcsample.$(O) jchuff.$(O) \ - jcphuff.$(O) jcdctmgr.$(O) jfdctfst.$(O) jfdctflt.$(O) \ - jfdctint.$(O) -# decompression library object files -DLIBOBJECTS= jdapimin.$(O) jdapistd.$(O) jdtrans.$(O) jdatasrc.$(O) \ - jdmaster.$(O) jdinput.$(O) jdmarker.$(O) jdhuff.$(O) jdphuff.$(O) \ - jdmainct.$(O) jdcoefct.$(O) jdpostct.$(O) jddctmgr.$(O) \ - jidctfst.$(O) jidctflt.$(O) jidctint.$(O) jidctred.$(O) \ - jdsample.$(O) jdcolor.$(O) jquant1.$(O) jquant2.$(O) jdmerge.$(O) -# These objectfiles are included in libjpeg.a -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.$(O) rdppm.$(O) rdgif.$(O) rdtarga.$(O) rdrle.$(O) \ - rdbmp.$(O) rdswitch.$(O) cdjpeg.$(O) -DOBJECTS= djpeg.$(O) wrppm.$(O) wrgif.$(O) wrtarga.$(O) wrrle.$(O) \ - wrbmp.$(O) rdcolmap.$(O) cdjpeg.$(O) -TROBJECTS= jpegtran.$(O) rdswitch.$(O) cdjpeg.$(O) transupp.$(O) - - -all: @A2K_DEPS@ libjpeg.$(A) cjpeg djpeg jpegtran rdjpgcom wrjpgcom - -# Special compilation rules to support ansi2knr and libtool. -.SUFFIXES: .lo .la - -# How to compile with libtool. -@COM_LT@.c.lo: -@COM_LT@ $(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c $(srcdir)/$*.c - -# How to use ansi2knr, when not using libtool. -@COM_A2K@.c.o: -@COM_A2K@ ./ansi2knr $(srcdir)/$*.c knr/$*.c -@COM_A2K@ $(CC) $(CFLAGS) -c knr/$*.c -@COM_A2K@ $(RM) knr/$*.c - -# How to use ansi2knr AND libtool. -@COM_A2K@.c.lo: -@COM_A2K@ ./ansi2knr $(srcdir)/$*.c knr/$*.c -@COM_A2K@ $(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c knr/$*.c -@COM_A2K@ $(RM) knr/$*.c - -ansi2knr: ansi2knr.c - $(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr $(srcdir)/ansi2knr.c - $(MKDIR) knr - -# the library: - -# without libtool: -libjpeg.a: @A2K_DEPS@ $(LIBOBJECTS) - $(RM) libjpeg.a - $(AR) libjpeg.a $(LIBOBJECTS) - $(AR2) libjpeg.a - -# with libtool: -libjpeg.la: @A2K_DEPS@ $(LIBOBJECTS) - $(LIBTOOL) --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \ - -rpath $(libdir) -version-info $(JPEG_LIB_VERSION) - -# sample programs: - -cjpeg: $(COBJECTS) libjpeg.$(A) - $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.$(A) $(LDLIBS) - -djpeg: $(DOBJECTS) libjpeg.$(A) - $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.$(A) $(LDLIBS) - -jpegtran: $(TROBJECTS) libjpeg.$(A) - $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.$(A) $(LDLIBS) - -rdjpgcom: rdjpgcom.$(O) - $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.$(O) $(LDLIBS) - -wrjpgcom: wrjpgcom.$(O) - $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.$(O) $(LDLIBS) - -# Installation rules: - -install: cjpeg djpeg jpegtran rdjpgcom wrjpgcom @FORCE_INSTALL_LIB@ - $(INSTALL_PROGRAM) cjpeg $(bindir)/$(binprefix)cjpeg - $(INSTALL_PROGRAM) djpeg $(bindir)/$(binprefix)djpeg - $(INSTALL_PROGRAM) jpegtran $(bindir)/$(binprefix)jpegtran - $(INSTALL_PROGRAM) rdjpgcom $(bindir)/$(binprefix)rdjpgcom - $(INSTALL_PROGRAM) wrjpgcom $(bindir)/$(binprefix)wrjpgcom - $(INSTALL_DATA) $(srcdir)/cjpeg.1 $(mandir)/$(manprefix)cjpeg.$(manext) - $(INSTALL_DATA) $(srcdir)/djpeg.1 $(mandir)/$(manprefix)djpeg.$(manext) - $(INSTALL_DATA) $(srcdir)/jpegtran.1 $(mandir)/$(manprefix)jpegtran.$(manext) - $(INSTALL_DATA) $(srcdir)/rdjpgcom.1 $(mandir)/$(manprefix)rdjpgcom.$(manext) - $(INSTALL_DATA) $(srcdir)/wrjpgcom.1 $(mandir)/$(manprefix)wrjpgcom.$(manext) - -install-lib: libjpeg.$(A) install-headers - $(INSTALL_LIB) libjpeg.$(A) $(libdir)/$(binprefix)libjpeg.$(A) - -install-headers: jconfig.h - $(INSTALL_DATA) jconfig.h $(includedir)/jconfig.h - $(INSTALL_DATA) $(srcdir)/jpeglib.h $(includedir)/jpeglib.h - $(INSTALL_DATA) $(srcdir)/jmorecfg.h $(includedir)/jmorecfg.h - $(INSTALL_DATA) $(srcdir)/jerror.h $(includedir)/jerror.h - -clean: - $(RM) *.o *.lo libjpeg.a libjpeg.la - $(RM) cjpeg djpeg jpegtran rdjpgcom wrjpgcom - $(RM) ansi2knr core testout* config.log config.status - $(RM) -r knr .libs _libs - -distclean: clean - $(RM) Makefile jconfig.h libtool config.cache - -test: cjpeg djpeg jpegtran - $(RM) testout* - ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg - ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm - ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg - cmp $(srcdir)/testimg.ppm testout.ppm - cmp $(srcdir)/testimg.bmp testout.bmp - cmp $(srcdir)/testimg.jpg testout.jpg - cmp $(srcdir)/testimg.ppm testoutp.ppm - cmp $(srcdir)/testimgp.jpg testoutp.jpg - cmp $(srcdir)/testorig.jpg testoutt.jpg - -check: test - -# Mistake catcher: - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -# GNU Make likes to know which target names are not really files to be made: -.PHONY: all install install-lib install-headers clean distclean test check - - -jcapimin.$(O): jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.$(O): jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.$(O): jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.$(O): jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.$(O): jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.$(O): jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.$(O): jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.$(O): jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.$(O): jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.$(O): jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.$(O): jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.$(O): jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.$(O): jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.$(O): jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.$(O): jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.$(O): jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.$(O): jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.$(O): jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.$(O): jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.$(O): jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.$(O): jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.$(O): jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.$(O): jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.$(O): jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.$(O): jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.$(O): jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.$(O): jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.$(O): jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.$(O): jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.$(O): jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.$(O): jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.$(O): jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.$(O): jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.$(O): jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.$(O): jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.$(O): jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.$(O): jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.$(O): jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.$(O): jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.$(O): jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.$(O): jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.$(O): jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.$(O): jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.$(O): jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.$(O): jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.$(O): jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.$(O): jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.$(O): jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.$(O): jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.$(O): jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.$(O): cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.$(O): djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.$(O): jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.$(O): rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.$(O): wrjpgcom.c jinclude.h jconfig.h -cdjpeg.$(O): cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.$(O): rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.$(O): rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.$(O): transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.$(O): rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.$(O): wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.$(O): rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.$(O): wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.$(O): rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.$(O): wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.$(O): rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.$(O): wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.$(O): rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.$(O): wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makefile.dj b/libjpegtwrp/makefile.dj deleted file mode 100644 index f766d25e3..000000000 --- a/libjpegtwrp/makefile.dj +++ /dev/null @@ -1,220 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later. -# Thanks to Frank J. Donahoe for this version. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= gcc - -# You may need to adjust these cc options: -CFLAGS= -O2 -Wall -I. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -LDFLAGS= -s - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= - -# Put here the object file name for the correct system-dependent memory -# manager file. For DJGPP this is usually jmemnobs.o, but you could -# use jmemname.o if you want to use named temp files instead of swap space. -SYSDEPMEM= jmemnobs.o - -# miscellaneous OS-dependent stuff -# linker -LN= $(CC) -# file deletion command -RM= del -# library (.a) file creation command -AR= ar rc -# second step in .a creation (use "touch" if not needed) -AR2= ranlib - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \ - jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \ - jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \ - jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \ - jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \ - jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \ - jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.a -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.a: $(LIBOBJECTS) - $(RM) libjpeg.a - $(AR) libjpeg.a $(LIBOBJECTS) - $(AR2) libjpeg.a - -cjpeg.exe: $(COBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS) - -djpeg.exe: $(DOBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS) - -jpegtran.exe: $(TROBJECTS) libjpeg.a - $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS) - -rdjpgcom.exe: rdjpgcom.o - $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS) - -wrjpgcom.exe: wrjpgcom.o - $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS) - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -clean: - $(RM) *.o - $(RM) cjpeg.exe - $(RM) djpeg.exe - $(RM) jpegtran.exe - $(RM) rdjpgcom.exe - $(RM) wrjpgcom.exe - $(RM) libjpeg.a - $(RM) testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe - $(RM) testout*.* - ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - ./cjpeg -dct int -outfile testout.jpg testimg.ppm - ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - ./jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - - -jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makefile.manx b/libjpegtwrp/makefile.manx deleted file mode 100644 index 4cb42d17c..000000000 --- a/libjpegtwrp/makefile.manx +++ /dev/null @@ -1,214 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Amiga systems using Manx Aztec C ver 5.x. -# Thanks to D.J. James (djjames@cup.portal.com) for this version. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= cc - -# You may need to adjust these cc options: -# Uncomment for generic 68000 code (will work on any Amiga) -ARCHFLAGS= -sn - -# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU) -#ARCHFLAGS= -c2 - -CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4 - -# Link-time cc options: -LDFLAGS= -g - -# To link any special libraries, add the necessary -l commands here. -LDLIBS= -lml -lcl - -# Put here the object file name for the correct system-dependent memory -# manager file. For Amiga we recommend jmemname.o. -SYSDEPMEM= jmemname.o - -# miscellaneous OS-dependent stuff -# linker -LN= ln -# file deletion command -RM= delete quiet -# library (.lib) file creation command -AR= lb - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \ - jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \ - jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \ - jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \ - jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \ - jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \ - jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom - -libjpeg.lib: $(LIBOBJECTS) - -$(RM) libjpeg.lib - $(AR) libjpeg.lib $(LIBOBJECTS) - -cjpeg: $(COBJECTS) libjpeg.lib - $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS) - -djpeg: $(DOBJECTS) libjpeg.lib - $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS) - -jpegtran: $(TROBJECTS) libjpeg.lib - $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS) - -rdjpgcom: rdjpgcom.o - $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) - -wrjpgcom: wrjpgcom.o - $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -clean: - -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom - -$(RM) core testout*.* - -test: cjpeg djpeg jpegtran - -$(RM) testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg - cmp testimg.ppm testout.ppm - cmp testimg.bmp testout.bmp - cmp testimg.jpg testout.jpg - cmp testimg.ppm testoutp.ppm - cmp testimgp.jpg testoutp.jpg - cmp testorig.jpg testoutt.jpg - - -jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makefile.mc6 b/libjpegtwrp/makefile.mc6 deleted file mode 100644 index 6aff05464..000000000 --- a/libjpegtwrp/makefile.mc6 +++ /dev/null @@ -1,249 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Microsoft C for MS-DOS, version 6.00A and up. -# Use NMAKE, not Microsoft's brain-damaged MAKE. -# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd. - -# Read installation instructions before saying "nmake" !! - -# You may need to adjust these compiler options: -CFLAGS = -AM -Oecigt -Gs -W3 -# -AM medium memory model (or use -AS for small model, if you remove features) -# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A) -# -W3 warning level 3 -# You might also want to add -G2 if you have an 80286, etc. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486: -# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \ -# /OV4 /W3 -# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler -# crash. - -# Ingar Steinsland suggests the following switches when building -# a 16-bit Windows DLL: -# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd - -# Put here the object file name for the correct system-dependent memory -# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm. -# (But not for Windows; see install.doc if you use this makefile for Windows.) -SYSDEPMEM= jmemdos.obj jmemdosa.obj -# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. -SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \ - jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \ - jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \ - jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \ - jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \ - jquant1.obj jquant2.obj jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - -# need linker response file because file list > 128 chars -RFILE = libjpeg.ans - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) $(RFILE) - del libjpeg.lib - lib @$(RFILE) - -# linker response file for building libjpeg.lib -$(RFILE) : makefile - del $(RFILE) - echo libjpeg.lib >$(RFILE) -# silly want-to-create-it prompt: - echo y >>$(RFILE) - echo +jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj & >>$(RFILE) - echo +jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj & >>$(RFILE) - echo +jcmainct.obj +jcprepct.obj +jccoefct.obj & >>$(RFILE) - echo +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj & >>$(RFILE) - echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE) - echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE) - echo +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj & >>$(RFILE) - echo +jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj & >>$(RFILE) - echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE) - echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE) - echo +jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE) - echo +jquant2.obj +jdmerge.obj +jcomapi.obj +jutils.obj & >>$(RFILE) - echo +jerror.obj +jmemmgr.obj & >>$(RFILE) - echo $(SYSDEPMEMLIB) ; >>$(RFILE) - -cjpeg.exe: $(COBJECTS) libjpeg.lib - echo $(COBJECTS) >cjpeg.lst - link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ; - del cjpeg.lst - -djpeg.exe: $(DOBJECTS) libjpeg.lib - echo $(DOBJECTS) >djpeg.lst - link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ; - del djpeg.lst - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ; - -rdjpgcom.exe: rdjpgcom.c - $(CC) -AS -O -W3 rdjpgcom.c - -# wrjpgcom needs large model so it can malloc a 64K chunk -wrjpgcom.exe: wrjpgcom.c - $(CC) -AL -O -W3 wrjpgcom.c - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -clean: - del *.obj - del libjpeg.lib - del cjpeg.exe - del djpeg.exe - del jpegtran.exe - del rdjpgcom.exe - del wrjpgcom.exe - del testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe - del testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - - -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -jmemdosa.obj : jmemdosa.asm - masm /mx $*; diff --git a/libjpegtwrp/makefile.mms b/libjpegtwrp/makefile.mms deleted file mode 100644 index cf130e5b9..000000000 --- a/libjpegtwrp/makefile.mms +++ /dev/null @@ -1,218 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for use with MMS on Digital VMS systems. -# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) -# and Tim Bell (tbell@netcom.com) for their help. - -# Read installation instructions before saying "MMS" !! - -# You may need to adjust these cc options: -CFLAGS= $(CFLAGS) /NoDebug /Optimize -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via /Define switches here. -.ifdef ALPHA -OPT= -.else -OPT= ,Sys$Disk:[]MAKVMS.OPT/Option -.endif - -# Put here the object file name for the correct system-dependent memory -# manager file. For Unix this is usually jmemnobs.o, but you may want -# to use jmemansi.o or jmemname.o if you have limited swap space. -SYSDEPMEM= jmemnobs.obj - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \ - jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \ - jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \ - jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \ - jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \ - jquant1.obj jquant2.obj jdmerge.obj -# These objectfiles are included in libjpeg.olb -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj -# objectfile lists with commas --- what a crock -COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\ - rdswitch.obj,cdjpeg.obj -DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\ - rdcolmap.obj,cdjpeg.obj -TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj -LIBOBJLIST= jcapimin.obj,jcapistd.obj,jctrans.obj,jcparam.obj,jdatadst.obj,\ - jcinit.obj,jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,\ - jccoefct.obj,jccolor.obj,jcsample.obj,jchuff.obj,jcphuff.obj,\ - jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,jdapimin.obj,\ - jdapistd.obj,jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,\ - jdmarker.obj,jdhuff.obj,jdphuff.obj,jdmainct.obj,jdcoefct.obj,\ - jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,jidctint.obj,\ - jidctred.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\ - jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM) - - -.first - @- Define /NoLog Sys Sys$Library - -ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - @ Continue - -libjpeg.olb : $(LIBOBJECTS) - Library /Create libjpeg.olb $(LIBOBJLIST) - -cjpeg.exe : $(COBJECTS) libjpeg.olb - $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT) - -djpeg.exe : $(DOBJECTS) libjpeg.olb - $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT) - -jpegtran.exe : $(TROBJECTS) libjpeg.olb - $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT) - -rdjpgcom.exe : rdjpgcom.obj - $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT) - -wrjpgcom.exe : wrjpgcom.obj - $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT) - -jconfig.h : jconfig.vms - @- Copy jconfig.vms jconfig.h - -clean : - @- Set Protection = Owner:RWED *.*;-1 - @- Set Protection = Owner:RWED *.OBJ - - Purge /NoLog /NoConfirm *.* - - Delete /NoLog /NoConfirm *.OBJ; - -test : cjpeg.exe djpeg.exe jpegtran.exe - mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm - mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg - - Backup /Compare/Log testimg.ppm testout.ppm - - Backup /Compare/Log testimg.bmp testout.bmp - - Backup /Compare/Log testimg.jpg testout.jpg - - Backup /Compare/Log testimg.ppm testoutp.ppm - - Backup /Compare/Log testimgp.jpg testoutp.jpg - - Backup /Compare/Log testorig.jpg testoutt.jpg - - -jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.obj : jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.obj : jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.obj : jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makefile.sas b/libjpegtwrp/makefile.sas deleted file mode 100644 index f296faf06..000000000 --- a/libjpegtwrp/makefile.sas +++ /dev/null @@ -1,252 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is for Amiga systems using SAS C 6.0 and up. -# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda. - -# Read installation instructions before saying "make" !! - -# The name of your C compiler: -CC= sc - -# You may need to adjust these cc options: -# Uncomment the following lines for generic 680x0 version -ARCHFLAGS= cpu=any -SUFFIX= - -# Uncomment the following lines for 68030-only version -#ARCHFLAGS= cpu=68030 -#SUFFIX=.030 - -CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \ - ignore=104 ignore=304 ignore=306 -# ignore=104 disables warnings for mismatched const qualifiers -# ignore=304 disables warnings for variables being optimized out -# ignore=306 disables warnings for the inlining of functions -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via define switches here. - -# Link-time cc options: -LDFLAGS= SC SD ND BATCH - -# To link any special libraries, add the necessary commands here. -LDLIBS= LIB:scm.lib LIB:sc.lib - -# Put here the object file name for the correct system-dependent memory -# manager file. For Amiga we recommend jmemname.o. -SYSDEPMEM= jmemname.o - -# miscellaneous OS-dependent stuff -# linker -LN= slink -# file deletion command -RM= delete quiet -# library (.lib) file creation command -AR= oml - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \ - jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \ - jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \ - jfdctint.o -# decompression library object files -DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \ - jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \ - jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \ - jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ - cdjpeg.o -DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ - cdjpeg.o -TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o - - -all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX) - -# note: do several AR steps to avoid command line length limitations - -libjpeg.lib: $(LIBOBJECTS) - -$(RM) libjpeg.lib - $(AR) libjpeg.lib r $(CLIBOBJECTS) - $(AR) libjpeg.lib r $(DLIBOBJECTS) - $(AR) libjpeg.lib r $(COMOBJECTS) - -cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib - $(LN) - -# You may want to adjust these compiler options: -CFLAGS= $(cflags) $(cdebug) $(cvars) -I. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time options: -LDFLAGS= $(ldebug) $(conlflags) - -# To link any special libraries, add the necessary commands here. -LDLIBS= $(conlibs) - -# Put here the object file name for the correct system-dependent memory -# manager file. For NT we suggest jmemnobs.obj, which expects the OS to -# provide adequate virtual memory. -SYSDEPMEM= jmemnobs.obj - -# miscellaneous OS-dependent stuff -# file deletion command -RM= del - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \ - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \ - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \ - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \ - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \ - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \ - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \ - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \ - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \ - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \ - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \ - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \ - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \ - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \ - jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \ - jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \ - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \ - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \ - jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \ - jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \ - jquant1.obj jquant2.obj jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - -# Template command for compiling .c to .obj -.c.obj: - $(cc) $(CFLAGS) $*.c - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) - $(RM) libjpeg.lib - lib -out:libjpeg.lib $(LIBOBJECTS) - -cjpeg.exe: $(COBJECTS) libjpeg.lib - $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) - -djpeg.exe: $(DOBJECTS) libjpeg.lib - $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) - -rdjpgcom.exe: rdjpgcom.obj - $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) - -wrjpgcom.exe: wrjpgcom.obj - $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) - - -clean: - $(RM) *.obj *.exe libjpeg.lib - $(RM) testout* - -test: cjpeg.exe djpeg.exe jpegtran.exe - $(RM) testout* - .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - .\cjpeg -dct int -outfile testout.jpg testimg.ppm - .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - .\jpegtran -outfile testoutt.jpg testprog.jpg - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg - - -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makefile.vms b/libjpegtwrp/makefile.vms deleted file mode 100644 index a42358d05..000000000 --- a/libjpegtwrp/makefile.vms +++ /dev/null @@ -1,142 +0,0 @@ -$! Makefile for Independent JPEG Group's software -$! -$! This is a command procedure for Digital VMS systems that do not have MMS. -$! It builds the JPEG software by brute force, recompiling everything whether -$! or not it is necessary. It then runs the basic self-test. -$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) -$! and Tim Bell (tbell@netcom.com) for their help. -$! -$! Read installation instructions before running this!! -$! -$ If F$Mode () .eqs. "INTERACTIVE" -$ Then -$ VERIFY = F$Verify (0) -$ Else -$ VERIFY = F$Verify (1) -$ EndIf -$ On Control_Y Then GoTo End -$ On Error Then GoTo End -$ -$ If F$GetSyi ("HW_MODEL") .gt. 1023 -$ Then -$ OPT = "" -$ Else -$ OPT = ",Sys$Disk:[]makvms.opt/Option" -$ EndIf -$ -$ DoCompile := CC /NoDebug /Optimize /NoList -$! -$ DoCompile jcapimin.c -$ DoCompile jcapistd.c -$ DoCompile jctrans.c -$ DoCompile jcparam.c -$ DoCompile jdatadst.c -$ DoCompile jcinit.c -$ DoCompile jcmaster.c -$ DoCompile jcmarker.c -$ DoCompile jcmainct.c -$ DoCompile jcprepct.c -$ DoCompile jccoefct.c -$ DoCompile jccolor.c -$ DoCompile jcsample.c -$ DoCompile jchuff.c -$ DoCompile jcphuff.c -$ DoCompile jcdctmgr.c -$ DoCompile jfdctfst.c -$ DoCompile jfdctflt.c -$ DoCompile jfdctint.c -$ DoCompile jdapimin.c -$ DoCompile jdapistd.c -$ DoCompile jdtrans.c -$ DoCompile jdatasrc.c -$ DoCompile jdmaster.c -$ DoCompile jdinput.c -$ DoCompile jdmarker.c -$ DoCompile jdhuff.c -$ DoCompile jdphuff.c -$ DoCompile jdmainct.c -$ DoCompile jdcoefct.c -$ DoCompile jdpostct.c -$ DoCompile jddctmgr.c -$ DoCompile jidctfst.c -$ DoCompile jidctflt.c -$ DoCompile jidctint.c -$ DoCompile jidctred.c -$ DoCompile jdsample.c -$ DoCompile jdcolor.c -$ DoCompile jquant1.c -$ DoCompile jquant2.c -$ DoCompile jdmerge.c -$ DoCompile jcomapi.c -$ DoCompile jutils.c -$ DoCompile jerror.c -$ DoCompile jmemmgr.c -$ DoCompile jmemnobs.c -$! -$ Library /Create libjpeg.olb jcapimin.obj,jcapistd.obj,jctrans.obj, - - jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj, - - jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj, - - jchuff.obj,jcphuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj, - - jfdctint.obj,jdapimin.obj,jdapistd.obj,jdtrans.obj,jdatasrc.obj, - - jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdphuff.obj, - - jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj, - - jidctflt.obj,jidctint.obj,jidctred.obj,jdsample.obj,jdcolor.obj, - - jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, - - jerror.obj,jmemmgr.obj,jmemnobs.obj -$! -$ DoCompile cjpeg.c -$ DoCompile rdppm.c -$ DoCompile rdgif.c -$ DoCompile rdtarga.c -$ DoCompile rdrle.c -$ DoCompile rdbmp.c -$ DoCompile rdswitch.c -$ DoCompile cdjpeg.c -$! -$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, - - rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' -$! -$ DoCompile djpeg.c -$ DoCompile wrppm.c -$ DoCompile wrgif.c -$ DoCompile wrtarga.c -$ DoCompile wrrle.c -$ DoCompile wrbmp.c -$ DoCompile rdcolmap.c -$ DoCompile cdjpeg.c -$! -$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, - - wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' -$! -$ DoCompile jpegtran.c -$ DoCompile rdswitch.c -$ DoCompile cdjpeg.c -$ DoCompile transupp.c -$! -$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, - - cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT' -$! -$ DoCompile rdjpgcom.c -$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT' -$! -$ DoCompile wrjpgcom.c -$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT' -$! -$! Run the self-test -$! -$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg -$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg -$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm -$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg -$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm -$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg -$ Backup /Compare/Log testimg.ppm testout.ppm -$ Backup /Compare/Log testimg.bmp testout.bmp -$ Backup /Compare/Log testimg.jpg testout.jpg -$ Backup /Compare/Log testimg.ppm testoutp.ppm -$ Backup /Compare/Log testimgp.jpg testoutp.jpg -$ Backup /Compare/Log testorig.jpg testoutt.jpg -$! -$End: -$ If Verify Then Set Verify -$ Exit diff --git a/libjpegtwrp/makefile.wat b/libjpegtwrp/makefile.wat deleted file mode 100644 index d953e466f..000000000 --- a/libjpegtwrp/makefile.wat +++ /dev/null @@ -1,233 +0,0 @@ -# Makefile for Independent JPEG Group's software - -# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using -# dos4g extender), OS/2, and Windows NT console mode. -# Thanks to Janos Haide, jhaide@btrvtech.com. - -# Read installation instructions before saying "wmake" !! - -# Uncomment line for desired system -SYSTEM=DOS -#SYSTEM=OS2 -#SYSTEM=NT - -# The name of your C compiler: -CC= wcl386 - -# You may need to adjust these cc options: -CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM) -# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a. -# Generally, we recommend defining any configuration symbols in jconfig.h, -# NOT via -D switches here. - -# Link-time cc options: -!ifeq SYSTEM DOS -LDFLAGS= -zq -l=dos4g -!else ifeq SYSTEM OS2 -LDFLAGS= -zq -l=os2v2 -!else ifeq SYSTEM NT -LDFLAGS= -zq -l=nt -!endif - -# Put here the object file name for the correct system-dependent memory -# manager file. jmemnobs should work fine for dos4g or OS/2 environment. -SYSDEPMEM= jmemnobs.obj - -# End of configurable options. - - -# source files: JPEG library proper -LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c & - jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c & - jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c & - jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c & - jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c & - jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c & - jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c & - jquant2.c jutils.c jmemmgr.c -# memmgr back ends: compile only one of these into a working library -SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c -# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom -APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c & - rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c & - rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c -SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) -# files included by source files -INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h & - jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h -# documentation, test, and support files -DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 & - wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc & - coderules.doc filelist.doc change.log -MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc & - makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds & - makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st & - maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms & - makvms.opt -CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat & - jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas & - jconfig.vms -CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh -OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm -TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg & - testimgp.jpg -DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) & - $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) -# library object files common to compression and decompression -COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) -# compression library object files -CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj & - jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj & - jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj & - jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj -# decompression library object files -DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj & - jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj & - jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj & - jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj & - jquant1.obj jquant2.obj jdmerge.obj -# These objectfiles are included in libjpeg.lib -LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -# object files for sample applications (excluding library files) -COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj & - rdswitch.obj cdjpeg.obj -DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj & - rdcolmap.obj cdjpeg.obj -TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj - - -all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe - -libjpeg.lib: $(LIBOBJECTS) - - del libjpeg.lib - * wlib -n libjpeg.lib $(LIBOBJECTS) - -cjpeg.exe: $(COBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib - -djpeg.exe: $(DOBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib - -jpegtran.exe: $(TROBJECTS) libjpeg.lib - $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib - -rdjpgcom.exe: rdjpgcom.c - $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c - -wrjpgcom.exe: wrjpgcom.c - $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c - -.c.obj: - $(CC) $(CFLAGS) -c $< - -jconfig.h: jconfig.doc - echo You must prepare a system-dependent jconfig.h file. - echo Please read the installation directions in install.doc. - exit 1 - -clean: .SYMBOLIC - - del *.obj - - del libjpeg.lib - - del cjpeg.exe - - del djpeg.exe - - del jpegtran.exe - - del rdjpgcom.exe - - del wrjpgcom.exe - - del testout*.* - -test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC - - del testout*.* - djpeg -dct int -ppm -outfile testout.ppm testorig.jpg - djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg - cjpeg -dct int -outfile testout.jpg testimg.ppm - djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg - cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm - jpegtran -outfile testoutt.jpg testprog.jpg -!ifeq SYSTEM DOS - fc /b testimg.ppm testout.ppm - fc /b testimg.bmp testout.bmp - fc /b testimg.jpg testout.jpg - fc /b testimg.ppm testoutp.ppm - fc /b testimgp.jpg testoutp.jpg - fc /b testorig.jpg testoutt.jpg -!else - echo n > n.tmp - comp testimg.ppm testout.ppm < n.tmp - comp testimg.bmp testout.bmp < n.tmp - comp testimg.jpg testout.jpg < n.tmp - comp testimg.ppm testoutp.ppm < n.tmp - comp testimgp.jpg testoutp.jpg < n.tmp - comp testorig.jpg testoutt.jpg < n.tmp - del n.tmp -!endif - - -jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h -jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h -jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h -jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h -jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h -jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h -cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h -jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h -rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h -wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h -cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h -rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h -wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/libjpegtwrp/makelib.ds b/libjpegtwrp/makelib.ds deleted file mode 100644 index c7ad36d09..000000000 --- a/libjpegtwrp/makelib.ds +++ /dev/null @@ -1,1046 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Static Library" 0x0104 - -!IF "$(CFG)" == "" -CFG=jpeg - Win32 -!MESSAGE No configuration specified. Defaulting to jpeg - Win32. -!ENDIF - -!IF "$(CFG)" != "jpeg - Win32" -!MESSAGE Invalid configuration "$(CFG)" specified. -!MESSAGE You can specify a configuration when running NMAKE on this makefile -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "jpeg - Win32" (based on "Win32 (x86) Static Library") -!MESSAGE -!ERROR An invalid configuration is specified. -!ENDIF - -!IF "$(OS)" == "Windows_NT" -NULL= -!ELSE -NULL=nul -!ENDIF -################################################################################ -# Begin Project -# PROP Target_Last_Scanned "jpeg - Win32" -CPP=cl.exe - -!IF "$(CFG)" == "jpeg - Win32" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Release" -# PROP Target_Dir "" -OUTDIR=.\Release -INTDIR=.\Release - -ALL : "$(OUTDIR)\jpeg.lib" - -CLEAN : - -@erase "$(INTDIR)\jcapimin.obj" - -@erase "$(INTDIR)\jcapistd.obj" - -@erase "$(INTDIR)\jctrans.obj" - -@erase "$(INTDIR)\jcparam.obj" - -@erase "$(INTDIR)\jdatadst.obj" - -@erase "$(INTDIR)\jcinit.obj" - -@erase "$(INTDIR)\jcmaster.obj" - -@erase "$(INTDIR)\jcmarker.obj" - -@erase "$(INTDIR)\jcmainct.obj" - -@erase "$(INTDIR)\jcprepct.obj" - -@erase "$(INTDIR)\jccoefct.obj" - -@erase "$(INTDIR)\jccolor.obj" - -@erase "$(INTDIR)\jcsample.obj" - -@erase "$(INTDIR)\jchuff.obj" - -@erase "$(INTDIR)\jcphuff.obj" - -@erase "$(INTDIR)\jcdctmgr.obj" - -@erase "$(INTDIR)\jfdctfst.obj" - -@erase "$(INTDIR)\jfdctflt.obj" - -@erase "$(INTDIR)\jfdctint.obj" - -@erase "$(INTDIR)\jdapimin.obj" - -@erase "$(INTDIR)\jdapistd.obj" - -@erase "$(INTDIR)\jdtrans.obj" - -@erase "$(INTDIR)\jdatasrc.obj" - -@erase "$(INTDIR)\jdmaster.obj" - -@erase "$(INTDIR)\jdinput.obj" - -@erase "$(INTDIR)\jdmarker.obj" - -@erase "$(INTDIR)\jdhuff.obj" - -@erase "$(INTDIR)\jdphuff.obj" - -@erase "$(INTDIR)\jdmainct.obj" - -@erase "$(INTDIR)\jdcoefct.obj" - -@erase "$(INTDIR)\jdpostct.obj" - -@erase "$(INTDIR)\jddctmgr.obj" - -@erase "$(INTDIR)\jidctfst.obj" - -@erase "$(INTDIR)\jidctflt.obj" - -@erase "$(INTDIR)\jidctint.obj" - -@erase "$(INTDIR)\jidctred.obj" - -@erase "$(INTDIR)\jdsample.obj" - -@erase "$(INTDIR)\jdcolor.obj" - -@erase "$(INTDIR)\jquant1.obj" - -@erase "$(INTDIR)\jquant2.obj" - -@erase "$(INTDIR)\jdmerge.obj" - -@erase "$(INTDIR)\jcomapi.obj" - -@erase "$(INTDIR)\jutils.obj" - -@erase "$(INTDIR)\jerror.obj" - -@erase "$(INTDIR)\jmemmgr.obj" - -@erase "$(INTDIR)\jmemnobs.obj" - -@erase "$(OUTDIR)\jpeg.lib" - -"$(OUTDIR)" : - if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" - -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c -# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c -CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS"\ - /Fp"$(INTDIR)/jpeg.pch" /YX /Fo"$(INTDIR)/" /c -CPP_OBJS=.\Release/ -CPP_SBRS=.\. -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -BSC32_FLAGS=/nologo /o"$(OUTDIR)/jpeg.bsc" -BSC32_SBRS= \ - -LIB32=link.exe -lib -# ADD BASE LIB32 /nologo -# ADD LIB32 /nologo -LIB32_FLAGS=/nologo /out:"$(OUTDIR)/jpeg.lib" -LIB32_OBJS= \ - "$(INTDIR)\jcapimin.obj" \ - "$(INTDIR)\jcapistd.obj" \ - "$(INTDIR)\jctrans.obj" \ - "$(INTDIR)\jcparam.obj" \ - "$(INTDIR)\jdatadst.obj" \ - "$(INTDIR)\jcinit.obj" \ - "$(INTDIR)\jcmaster.obj" \ - "$(INTDIR)\jcmarker.obj" \ - "$(INTDIR)\jcmainct.obj" \ - "$(INTDIR)\jcprepct.obj" \ - "$(INTDIR)\jccoefct.obj" \ - "$(INTDIR)\jccolor.obj" \ - "$(INTDIR)\jcsample.obj" \ - "$(INTDIR)\jchuff.obj" \ - "$(INTDIR)\jcphuff.obj" \ - "$(INTDIR)\jcdctmgr.obj" \ - "$(INTDIR)\jfdctfst.obj" \ - "$(INTDIR)\jfdctflt.obj" \ - "$(INTDIR)\jfdctint.obj" \ - "$(INTDIR)\jdapimin.obj" \ - "$(INTDIR)\jdapistd.obj" \ - "$(INTDIR)\jdtrans.obj" \ - "$(INTDIR)\jdatasrc.obj" \ - "$(INTDIR)\jdmaster.obj" \ - "$(INTDIR)\jdinput.obj" \ - "$(INTDIR)\jdmarker.obj" \ - "$(INTDIR)\jdhuff.obj" \ - "$(INTDIR)\jdphuff.obj" \ - "$(INTDIR)\jdmainct.obj" \ - "$(INTDIR)\jdcoefct.obj" \ - "$(INTDIR)\jdpostct.obj" \ - "$(INTDIR)\jddctmgr.obj" \ - "$(INTDIR)\jidctfst.obj" \ - "$(INTDIR)\jidctflt.obj" \ - "$(INTDIR)\jidctint.obj" \ - "$(INTDIR)\jidctred.obj" \ - "$(INTDIR)\jdsample.obj" \ - "$(INTDIR)\jdcolor.obj" \ - "$(INTDIR)\jquant1.obj" \ - "$(INTDIR)\jquant2.obj" \ - "$(INTDIR)\jdmerge.obj" \ - "$(INTDIR)\jcomapi.obj" \ - "$(INTDIR)\jutils.obj" \ - "$(INTDIR)\jerror.obj" \ - "$(INTDIR)\jmemmgr.obj" \ - "$(INTDIR)\jmemnobs.obj" - -"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS) - $(LIB32) @<< - $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS) -<< - -!ENDIF - -.c{$(CPP_OBJS)}.obj: - $(CPP) $(CPP_PROJ) $< - -.cpp{$(CPP_OBJS)}.obj: - $(CPP) $(CPP_PROJ) $< - -.cxx{$(CPP_OBJS)}.obj: - $(CPP) $(CPP_PROJ) $< - -.c{$(CPP_SBRS)}.sbr: - $(CPP) $(CPP_PROJ) $< - -.cpp{$(CPP_SBRS)}.sbr: - $(CPP) $(CPP_PROJ) $< - -.cxx{$(CPP_SBRS)}.sbr: - $(CPP) $(CPP_PROJ) $< - -################################################################################ -# Begin Target - -# Name "jpeg - Win32" - -!IF "$(CFG)" == "jpeg - Win32" - -!ENDIF - -################################################################################ -# Begin Source File - -SOURCE="jcapimin.c" -DEP_CPP_JCAPI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcapimin.obj" : $(SOURCE) $(DEP_CPP_JCAPI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcapistd.c" -DEP_CPP_JCAPIS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcapistd.obj" : $(SOURCE) $(DEP_CPP_JCAPIS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jccoefct.c" -DEP_CPP_JCCOE=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jccoefct.obj" : $(SOURCE) $(DEP_CPP_JCCOE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jccolor.c" -DEP_CPP_JCCOL=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jccolor.obj" : $(SOURCE) $(DEP_CPP_JCCOL) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcdctmgr.c" -DEP_CPP_JCDCT=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) $(DEP_CPP_JCDCT) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jchuff.c" -DEP_CPP_JCHUF=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jchuff.h"\ - - -"$(INTDIR)\jchuff.obj" : $(SOURCE) $(DEP_CPP_JCHUF) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcinit.c" -DEP_CPP_JCINI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcinit.obj" : $(SOURCE) $(DEP_CPP_JCINI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcmainct.c" -DEP_CPP_JCMAI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcmainct.obj" : $(SOURCE) $(DEP_CPP_JCMAI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcmarker.c" -DEP_CPP_JCMAR=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcmarker.obj" : $(SOURCE) $(DEP_CPP_JCMAR) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcmaster.c" -DEP_CPP_JCMAS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcmaster.obj" : $(SOURCE) $(DEP_CPP_JCMAS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcomapi.c" -DEP_CPP_JCOMA=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcomapi.obj" : $(SOURCE) $(DEP_CPP_JCOMA) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcparam.c" -DEP_CPP_JCPAR=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcparam.obj" : $(SOURCE) $(DEP_CPP_JCPAR) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcphuff.c" -DEP_CPP_JCPHU=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jchuff.h"\ - - -"$(INTDIR)\jcphuff.obj" : $(SOURCE) $(DEP_CPP_JCPHU) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcprepct.c" -DEP_CPP_JCPRE=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcprepct.obj" : $(SOURCE) $(DEP_CPP_JCPRE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jcsample.c" -DEP_CPP_JCSAM=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jcsample.obj" : $(SOURCE) $(DEP_CPP_JCSAM) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jctrans.c" -DEP_CPP_JCTRA=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jctrans.obj" : $(SOURCE) $(DEP_CPP_JCTRA) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdapimin.c" -DEP_CPP_JDAPI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdapimin.obj" : $(SOURCE) $(DEP_CPP_JDAPI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdapistd.c" -DEP_CPP_JDAPIS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdapistd.obj" : $(SOURCE) $(DEP_CPP_JDAPIS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdatadst.c" -DEP_CPP_JDATA=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdatadst.obj" : $(SOURCE) $(DEP_CPP_JDATA) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdatasrc.c" -DEP_CPP_JDATAS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdatasrc.obj" : $(SOURCE) $(DEP_CPP_JDATAS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdcoefct.c" -DEP_CPP_JDCOE=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdcoefct.obj" : $(SOURCE) $(DEP_CPP_JDCOE) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdcolor.c" -DEP_CPP_JDCOL=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdcolor.obj" : $(SOURCE) $(DEP_CPP_JDCOL) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jddctmgr.c" -DEP_CPP_JDDCT=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jddctmgr.obj" : $(SOURCE) $(DEP_CPP_JDDCT) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdhuff.c" -DEP_CPP_JDHUF=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdhuff.h"\ - - -"$(INTDIR)\jdhuff.obj" : $(SOURCE) $(DEP_CPP_JDHUF) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdinput.c" -DEP_CPP_JDINP=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdinput.obj" : $(SOURCE) $(DEP_CPP_JDINP) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdmainct.c" -DEP_CPP_JDMAI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdmainct.obj" : $(SOURCE) $(DEP_CPP_JDMAI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdmarker.c" -DEP_CPP_JDMAR=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdmarker.obj" : $(SOURCE) $(DEP_CPP_JDMAR) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdmaster.c" -DEP_CPP_JDMAS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdmaster.obj" : $(SOURCE) $(DEP_CPP_JDMAS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdmerge.c" -DEP_CPP_JDMER=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdmerge.obj" : $(SOURCE) $(DEP_CPP_JDMER) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdphuff.c" -DEP_CPP_JDPHU=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdhuff.h"\ - - -"$(INTDIR)\jdphuff.obj" : $(SOURCE) $(DEP_CPP_JDPHU) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdpostct.c" -DEP_CPP_JDPOS=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdpostct.obj" : $(SOURCE) $(DEP_CPP_JDPOS) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdsample.c" -DEP_CPP_JDSAM=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdsample.obj" : $(SOURCE) $(DEP_CPP_JDSAM) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jdtrans.c" -DEP_CPP_JDTRA=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jdtrans.obj" : $(SOURCE) $(DEP_CPP_JDTRA) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jerror.c" -DEP_CPP_JERRO=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jversion.h"\ - "jerror.h"\ - - -"$(INTDIR)\jerror.obj" : $(SOURCE) $(DEP_CPP_JERRO) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jfdctflt.c" -DEP_CPP_JFDCT=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jfdctflt.obj" : $(SOURCE) $(DEP_CPP_JFDCT) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jfdctfst.c" -DEP_CPP_JFDCTF=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jfdctfst.obj" : $(SOURCE) $(DEP_CPP_JFDCTF) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jfdctint.c" -DEP_CPP_JFDCTI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jfdctint.obj" : $(SOURCE) $(DEP_CPP_JFDCTI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jidctflt.c" -DEP_CPP_JIDCT=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jidctflt.obj" : $(SOURCE) $(DEP_CPP_JIDCT) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jidctfst.c" -DEP_CPP_JIDCTF=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jidctfst.obj" : $(SOURCE) $(DEP_CPP_JIDCTF) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jidctint.c" -DEP_CPP_JIDCTI=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jidctint.obj" : $(SOURCE) $(DEP_CPP_JIDCTI) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jidctred.c" -DEP_CPP_JIDCTR=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jdct.h"\ - - -"$(INTDIR)\jidctred.obj" : $(SOURCE) $(DEP_CPP_JIDCTR) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jquant1.c" -DEP_CPP_JQUAN=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jquant1.obj" : $(SOURCE) $(DEP_CPP_JQUAN) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jquant2.c" -DEP_CPP_JQUANT=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jquant2.obj" : $(SOURCE) $(DEP_CPP_JQUANT) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jutils.c" -DEP_CPP_JUTIL=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - - -"$(INTDIR)\jutils.obj" : $(SOURCE) $(DEP_CPP_JUTIL) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jmemmgr.c" -DEP_CPP_JMEMM=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jmemsys.h"\ - - -"$(INTDIR)\jmemmgr.obj" : $(SOURCE) $(DEP_CPP_JMEMM) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -################################################################################ -# Begin Source File - -SOURCE="jmemnobs.c" -DEP_CPP_JMEMN=\ - "jinclude.h"\ - "jconfig.h"\ - "jpeglib.h"\ - "jmorecfg.h"\ - "jpegint.h"\ - "jerror.h"\ - "jmemsys.h"\ - - -"$(INTDIR)\jmemnobs.obj" : $(SOURCE) $(DEP_CPP_JMEMN) "$(INTDIR)" - $(CPP) $(CPP_PROJ) $(SOURCE) - - -# End Source File -# End Target -# End Project -################################################################################ - diff --git a/libjpegtwrp/makeproj.mac b/libjpegtwrp/makeproj.mac deleted file mode 100644 index ed277c83d..000000000 --- a/libjpegtwrp/makeproj.mac +++ /dev/null @@ -1,213 +0,0 @@ --- --- makeproj.mac --- --- This AppleScript builds Code Warrior PRO Release 2 project files for the --- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'. --- (We'd distribute real project files, except they're not text --- and would create maintenance headaches.) --- --- The script then compiles and links the library and the test programs. --- NOTE: if you haven't already created a 'jconfig.h' file, the script --- automatically copies 'jconfig.mac' to 'jconfig.h'. --- --- To use this script, you must have AppleScript 1.1 or later installed --- and a suitable AppleScript editor like Script Editor or Script Debugger --- (http://www.latenightsw.com). Open this file with your AppleScript --- editor and execute the "run" command to build the projects. --- --- Thanks to Dan Sears and Don Agro for this script. --- Questions about this script can be addressed to dogpark@interlog.com --- - -on run - - choose folder with prompt ">>> Select IJG source folder <<<" - set ijg_folder to result - - choose folder with prompt ">>> Select MetroWerks folder <<<" - set cw_folder to result - - -- if jconfig.h doesn't already exist, copy jconfig.mac - - tell application "Finder" - if not (exists file "jconfig.h" of ijg_folder) then - duplicate {file "jconfig.mac" of folder ijg_folder} - select file "jconfig.mac copy" of folder ijg_folder - set name of selection to "jconfig.h" - end if - end tell - - tell application "CodeWarrior IDE 2.1" - with timeout of 10000 seconds - - -- create libjpeg project - - activate - Create Project (ijg_folder as string) & "libjpeg.proj" - Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"} - Set Preferences of panel "PPC Project" to {File Name:"libjpeg"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "PPC Project" to {Project Type:library} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1 - Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1 - Add Files (ijg_folder as string) & "jctrans.c" To Segment 1 - Add Files (ijg_folder as string) & "jcparam.c" To Segment 1 - Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1 - Add Files (ijg_folder as string) & "jcinit.c" To Segment 1 - Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1 - Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1 - Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1 - Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1 - Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1 - Add Files (ijg_folder as string) & "jccolor.c" To Segment 1 - Add Files (ijg_folder as string) & "jcsample.c" To Segment 1 - Add Files (ijg_folder as string) & "jchuff.c" To Segment 1 - Add Files (ijg_folder as string) & "jcphuff.c" To Segment 1 - Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1 - Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1 - Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1 - Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1 - Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1 - Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1 - Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1 - Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1 - Add Files (ijg_folder as string) & "jdinput.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1 - Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1 - Add Files (ijg_folder as string) & "jdphuff.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1 - Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1 - Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1 - Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctint.c" To Segment 1 - Add Files (ijg_folder as string) & "jidctred.c" To Segment 1 - Add Files (ijg_folder as string) & "jdsample.c" To Segment 1 - Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1 - Add Files (ijg_folder as string) & "jquant1.c" To Segment 1 - Add Files (ijg_folder as string) & "jquant2.c" To Segment 1 - Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1 - Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1 - Add Files (ijg_folder as string) & "jutils.c" To Segment 1 - Add Files (ijg_folder as string) & "jerror.c" To Segment 1 - Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1 - Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1 - - -- compile and link the library - - Make Project - Close Project - - -- create cjpeg project - - activate - Create Project (ijg_folder as string) & "cjpeg.proj" - Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"} - Set Preferences of panel "PPC Project" to {File Name:"cjpeg"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1 - Add Files (ijg_folder as string) & "rdppm.c" To Segment 1 - Add Files (ijg_folder as string) & "rdgif.c" To Segment 1 - Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1 - Add Files (ijg_folder as string) & "rdrle.c" To Segment 1 - Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1 - Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 - Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 - - Add Files (ijg_folder as string) & "libjpeg" To Segment 2 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 - - -- compile and link cjpeg - - Make Project - Close Project - - -- create djpeg project - - activate - Create Project (ijg_folder as string) & "djpeg.proj" - Set Preferences of panel "Target Settings" to {Target Name:"djpeg"} - Set Preferences of panel "PPC Project" to {File Name:"djpeg"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "djpeg.c" To Segment 1 - Add Files (ijg_folder as string) & "wrppm.c" To Segment 1 - Add Files (ijg_folder as string) & "wrgif.c" To Segment 1 - Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1 - Add Files (ijg_folder as string) & "wrrle.c" To Segment 1 - Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1 - Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1 - Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 - - Add Files (ijg_folder as string) & "libjpeg" To Segment 2 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 - - -- compile and link djpeg - - Make Project - Close Project - - -- create jpegtran project - - activate - Create Project (ijg_folder as string) & "jpegtran.proj" - Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"} - Set Preferences of panel "PPC Project" to {File Name:"jpegtran"} - Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} - Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} - Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} - Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} - Set Preferences of panel "PPC Linker" to {Generate SYM File:false} - - Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1 - Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 - Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 - Add Files (ijg_folder as string) & "transupp.c" To Segment 1 - - Add Files (ijg_folder as string) & "libjpeg" To Segment 2 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 - - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 - Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 - - -- compile and link jpegtran - - Make Project - Close Project - - quit - - end timeout - end tell -end run diff --git a/libjpegtwrp/makljpeg.st b/libjpegtwrp/makljpeg.st deleted file mode 100644 index 813493ea8..000000000 --- a/libjpegtwrp/makljpeg.st +++ /dev/null @@ -1,70 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de), -; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de), -; and Guido Vollbeding (guivol@esc.de). -; -; To use this file, rename it to libjpeg.prj. -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -libjpeg.lib -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -.L[-J] ; link new Obj-format (so we get a library) -= -; * * * * List of modules * * * * -jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jchuff.h) -jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcphuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jchuff.h) -jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) -jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) -jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdhuff.h) -jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdphuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdhuff.h) -jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h) -jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jidctred.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) -jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) -jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) -jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) diff --git a/libjpegtwrp/maktjpeg.st b/libjpegtwrp/maktjpeg.st deleted file mode 100644 index 31f4d169c..000000000 --- a/libjpegtwrp/maktjpeg.st +++ /dev/null @@ -1,32 +0,0 @@ -; Project file for Independent JPEG Group's software -; -; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. -; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de), -; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de), -; and Guido Vollbeding (guivol@esc.de). -; -; To use this file, rename it to jpegtran.prj. -; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." -; Read installation instructions before trying to make the program! -; -; -; * * * Output file * * * -jpegtran.ttp -; -; * * * COMPILER OPTIONS * * * -.C[-P] ; absolute calls -.C[-M] ; and no string merging, folks -.C[-w-cln] ; no "constant is long" warnings -.C[-w-par] ; no "parameter xxxx unused" -.C[-w-rch] ; no "unreachable code" -.C[-wsig] ; warn if significant digits may be lost -= -; * * * * List of modules * * * * -pcstart.o -jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h) -cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) -transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h) -libjpeg.lib ; built by libjpeg.prj -pcstdlib.lib ; standard library -pcextlib.lib ; extended library diff --git a/libjpegtwrp/makvms.opt b/libjpegtwrp/makvms.opt deleted file mode 100644 index 675e8fe98..000000000 --- a/libjpegtwrp/makvms.opt +++ /dev/null @@ -1,4 +0,0 @@ -! A pointer to the VAX/VMS C Run-Time Shareable Library. -! This file is needed by makefile.mms and makefile.vms, -! but only for the older VAX C compiler. DEC C does not need it. -Sys$Library:VAXCRTL.EXE /Share diff --git a/libjpegtwrp/rdbmp.c b/libjpegtwrp/rdbmp.c deleted file mode 100644 index b05fe2ac4..000000000 --- a/libjpegtwrp/rdbmp.c +++ /dev/null @@ -1,439 +0,0 @@ -/* - * rdbmp.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in Microsoft "BMP" - * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors). - * Currently, only 8-bit and 24-bit images are supported, not 1-bit or - * 4-bit (feeding such low-depth images into JPEG would be silly anyway). - * Also, we don't support RLE-compressed files. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed BMP format). - * - * This code contributed by James Arthur Boucher. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef BMP_SUPPORTED - - -/* Macros to deal with unsigned chars as efficiently as compiler allows */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char U_CHAR; -#define UCH(x) ((int) (x)) -#else /* !HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char U_CHAR; -#define UCH(x) ((int) (x)) -#else -typedef char U_CHAR; -#define UCH(x) ((int) (x) & 0xFF) -#endif -#endif /* HAVE_UNSIGNED_CHAR */ - - -#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) - - -/* Private version of data source object */ - -typedef struct _bmp_source_struct * bmp_source_ptr; - -typedef struct _bmp_source_struct { - struct cjpeg_source_struct pub; /* public fields */ - - j_compress_ptr cinfo; /* back link saves passing separate parm */ - - JSAMPARRAY colormap; /* BMP colormap (converted to my format) */ - - jvirt_sarray_ptr whole_image; /* Needed to reverse row order */ - JDIMENSION source_row; /* Current source row number */ - JDIMENSION row_width; /* Physical width of scanlines in file */ - - int bits_per_pixel; /* remembers 8- or 24-bit format */ -} bmp_source_struct; - - -LOCAL(int) -read_byte (bmp_source_ptr sinfo) -/* Read next byte from BMP file */ -{ - register FILE *infile = sinfo->pub.input_file; - register int c; - - if ((c = getc(infile)) == EOF) - ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); - return c; -} - - -LOCAL(void) -read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize) -/* Read the colormap from a BMP file */ -{ - int i; - - switch (mapentrysize) { - case 3: - /* BGR format (occurs in OS/2 files) */ - for (i = 0; i < cmaplen; i++) { - sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); - } - break; - case 4: - /* BGR0 format (occurs in MS Windows files) */ - for (i = 0; i < cmaplen; i++) { - sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); - (void) read_byte(sinfo); - } - break; - default: - ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP); - break; - } -} - - -/* - * Read one row of pixels. - * The image has been read into the whole_image array, but is otherwise - * unprocessed. We must read it out in top-to-bottom row order, and if - * it is an 8-bit image, we must expand colormapped pixels to 24bit format. - */ - -METHODDEF(JDIMENSION) -get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 8-bit colormap indexes */ -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - register JSAMPARRAY colormap = source->colormap; - JSAMPARRAY image_ptr; - register int t; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - - /* Fetch next row from virtual array */ - source->source_row--; - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source->source_row, (JDIMENSION) 1, FALSE); - - /* Expand the colormap indexes to real data */ - inptr = image_ptr[0]; - outptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - t = GETJSAMPLE(*inptr++); - *outptr++ = colormap[0][t]; /* can omit GETJSAMPLE() safely */ - *outptr++ = colormap[1][t]; - *outptr++ = colormap[2][t]; - } - - return 1; -} - - -METHODDEF(JDIMENSION) -get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 24-bit pixels */ -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - - /* Fetch next row from virtual array */ - source->source_row--; - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source->source_row, (JDIMENSION) 1, FALSE); - - /* Transfer data. Note source values are in BGR order - * (even though Microsoft's own documents say the opposite). - */ - inptr = image_ptr[0]; - outptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ - outptr[1] = *inptr++; - outptr[0] = *inptr++; - outptr += 3; - } - - return 1; -} - - -/* - * This method loads the image into whole_image during the first call on - * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call - * get_8bit_row or get_24bit_row on subsequent calls. - */ - -METHODDEF(JDIMENSION) -preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - register FILE *infile = source->pub.input_file; - register int c; - register JSAMPROW out_ptr; - JSAMPARRAY image_ptr; - JDIMENSION row, col; - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - - /* Read the data into a virtual array in input-file row order. */ - for (row = 0; row < cinfo->image_height; row++) { - if (progress != NULL) { - progress->pub.pass_counter = (long) row; - progress->pub.pass_limit = (long) cinfo->image_height; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - row, (JDIMENSION) 1, TRUE); - out_ptr = image_ptr[0]; - for (col = source->row_width; col > 0; col--) { - /* inline copy of read_byte() for speed */ - if ((c = getc(infile)) == EOF) - ERREXIT(cinfo, JERR_INPUT_EOF); - *out_ptr++ = (JSAMPLE) c; - } - } - if (progress != NULL) - progress->completed_extra_passes++; - - /* Set up to read from the virtual array in top-to-bottom order */ - switch (source->bits_per_pixel) { - case 8: - source->pub.get_pixel_rows = get_8bit_row; - break; - case 24: - source->pub.get_pixel_rows = get_24bit_row; - break; - default: - ERREXIT(cinfo, JERR_BMP_BADDEPTH); - } - source->source_row = cinfo->image_height; - - /* And read the first row */ - return (*source->pub.get_pixel_rows) (cinfo, sinfo); -} - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - bmp_source_ptr source = (bmp_source_ptr) sinfo; - U_CHAR bmpfileheader[14]; - U_CHAR bmpinfoheader[64]; -#define GET_2B(array,offset) ((unsigned int) UCH(array[offset]) + \ - (((unsigned int) UCH(array[offset+1])) << 8)) -#define GET_4B(array,offset) ((INT32) UCH(array[offset]) + \ - (((INT32) UCH(array[offset+1])) << 8) + \ - (((INT32) UCH(array[offset+2])) << 16) + \ - (((INT32) UCH(array[offset+3])) << 24)) - INT32 bfOffBits; - INT32 headerSize; - INT32 biWidth = 0; /* initialize to avoid compiler warning */ - INT32 biHeight = 0; - unsigned int biPlanes; - INT32 biCompression; - INT32 biXPelsPerMeter,biYPelsPerMeter; - INT32 biClrUsed = 0; - int mapentrysize = 0; /* 0 indicates no colormap */ - INT32 bPad; - JDIMENSION row_width; - - /* Read and verify the bitmap file header */ - if (! ReadOK(source->pub.input_file, bmpfileheader, 14)) - ERREXIT(cinfo, JERR_INPUT_EOF); - if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */ - ERREXIT(cinfo, JERR_BMP_NOT); - bfOffBits = (INT32) GET_4B(bmpfileheader,10); - /* We ignore the remaining fileheader fields */ - - /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows), - * or 64 bytes (OS/2 2.x). Check the first 4 bytes to find out which. - */ - if (! ReadOK(source->pub.input_file, bmpinfoheader, 4)) - ERREXIT(cinfo, JERR_INPUT_EOF); - headerSize = (INT32) GET_4B(bmpinfoheader,0); - if (headerSize < 12 || headerSize > 64) - ERREXIT(cinfo, JERR_BMP_BADHEADER); - if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4)) - ERREXIT(cinfo, JERR_INPUT_EOF); - - switch ((int) headerSize) { - case 12: - /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */ - biWidth = (INT32) GET_2B(bmpinfoheader,4); - biHeight = (INT32) GET_2B(bmpinfoheader,6); - biPlanes = GET_2B(bmpinfoheader,8); - source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10); - - switch (source->bits_per_pixel) { - case 8: /* colormapped image */ - mapentrysize = 3; /* OS/2 uses RGBTRIPLE colormap */ - TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight); - break; - case 24: /* RGB image */ - TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight); - break; - default: - ERREXIT(cinfo, JERR_BMP_BADDEPTH); - break; - } - if (biPlanes != 1) - ERREXIT(cinfo, JERR_BMP_BADPLANES); - break; - case 40: - case 64: - /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */ - /* or OS/2 2.x header, which has additional fields that we ignore */ - biWidth = GET_4B(bmpinfoheader,4); - biHeight = GET_4B(bmpinfoheader,8); - biPlanes = GET_2B(bmpinfoheader,12); - source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14); - biCompression = GET_4B(bmpinfoheader,16); - biXPelsPerMeter = GET_4B(bmpinfoheader,24); - biYPelsPerMeter = GET_4B(bmpinfoheader,28); - biClrUsed = GET_4B(bmpinfoheader,32); - /* biSizeImage, biClrImportant fields are ignored */ - - switch (source->bits_per_pixel) { - case 8: /* colormapped image */ - mapentrysize = 4; /* Windows uses RGBQUAD colormap */ - TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight); - break; - case 24: /* RGB image */ - TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight); - break; - default: - ERREXIT(cinfo, JERR_BMP_BADDEPTH); - break; - } - if (biPlanes != 1) - ERREXIT(cinfo, JERR_BMP_BADPLANES); - if (biCompression != 0) - ERREXIT(cinfo, JERR_BMP_COMPRESSED); - - if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) { - /* Set JFIF density parameters from the BMP data */ - cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */ - cinfo->Y_density = (UINT16) (biYPelsPerMeter/100); - cinfo->density_unit = 2; /* dots/cm */ - } - break; - default: - ERREXIT(cinfo, JERR_BMP_BADHEADER); - break; - } - - /* Compute distance to bitmap data --- will adjust for colormap below */ - bPad = bfOffBits - (headerSize + 14); - - /* Read the colormap, if any */ - if (mapentrysize > 0) { - if (biClrUsed <= 0) - biClrUsed = 256; /* assume it's 256 */ - else if (biClrUsed > 256) - ERREXIT(cinfo, JERR_BMP_BADCMAP); - /* Allocate space to store the colormap */ - source->colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) biClrUsed, (JDIMENSION) 3); - /* and read it from the file */ - read_colormap(source, (int) biClrUsed, mapentrysize); - /* account for size of colormap */ - bPad -= biClrUsed * mapentrysize; - } - - /* Skip any remaining pad bytes */ - if (bPad < 0) /* incorrect bfOffBits value? */ - ERREXIT(cinfo, JERR_BMP_BADHEADER); - while (--bPad >= 0) { - (void) read_byte(source); - } - - /* Compute row width in file, including padding to 4-byte boundary */ - if (source->bits_per_pixel == 24) - row_width = (JDIMENSION) (biWidth * 3); - else - row_width = (JDIMENSION) biWidth; - while ((row_width & 3) != 0) row_width++; - source->row_width = row_width; - - /* Allocate space for inversion array, prepare for preload pass */ - source->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - row_width, (JDIMENSION) biHeight, (JDIMENSION) 1); - source->pub.get_pixel_rows = preload_image; - if (cinfo->progress != NULL) { - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - progress->total_extra_passes++; /* count file input as separate pass */ - } - - /* Allocate one-row buffer for returned data */ - source->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (biWidth * 3), (JDIMENSION) 1); - source->pub.buffer_height = 1; - - cinfo->in_color_space = JCS_RGB; - cinfo->input_components = 3; - cinfo->data_precision = 8; - cinfo->image_width = (JDIMENSION) biWidth; - cinfo->image_height = (JDIMENSION) biHeight; -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for BMP format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_bmp (j_compress_ptr cinfo) -{ - bmp_source_ptr source; - - /* Create module interface object */ - source = (bmp_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(bmp_source_struct)); - source->cinfo = cinfo; /* make back link for subroutines */ - /* Fill in method ptrs, except get_pixel_rows which start_input sets */ - source->pub.start_input = start_input_bmp; - source->pub.finish_input = finish_input_bmp; - - return (cjpeg_source_ptr) source; -} - -#endif /* BMP_SUPPORTED */ diff --git a/libjpegtwrp/rdcolmap.c b/libjpegtwrp/rdcolmap.c deleted file mode 100644 index 42b343763..000000000 --- a/libjpegtwrp/rdcolmap.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * rdcolmap.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file implements djpeg's "-map file" switch. It reads a source image - * and constructs a colormap to be supplied to the JPEG decompressor. - * - * Currently, these file formats are supported for the map file: - * GIF: the contents of the GIF's global colormap are used. - * PPM (either text or raw flavor): the entire file is read and - * each unique pixel value is entered in the map. - * Note that reading a large PPM file will be horrendously slow. - * Typically, a PPM-format map file should contain just one pixel - * of each desired color. Such a file can be extracted from an - * ordinary image PPM file with ppmtomap(1). - * - * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not - * currently implemented. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */ - -/* Portions of this code are based on the PBMPLUS library, which is: -** -** Copyright (C) 1988 by Jef Poskanzer. -** -** Permission to use, copy, modify, and distribute this software and its -** documentation for any purpose and without fee is hereby granted, provided -** that the above copyright notice appear in all copies and that both that -** copyright notice and this permission notice appear in supporting -** documentation. This software is provided "as is" without express or -** implied warranty. -*/ - - -/* - * Add a (potentially) new color to the color map. - */ - -LOCAL(void) -add_map_entry (j_decompress_ptr cinfo, int R, int G, int B) -{ - JSAMPROW colormap0 = cinfo->colormap[0]; - JSAMPROW colormap1 = cinfo->colormap[1]; - JSAMPROW colormap2 = cinfo->colormap[2]; - int ncolors = cinfo->actual_number_of_colors; - int index; - - /* Check for duplicate color. */ - for (index = 0; index < ncolors; index++) { - if (GETJSAMPLE(colormap0[index]) == R && - GETJSAMPLE(colormap1[index]) == G && - GETJSAMPLE(colormap2[index]) == B) - return; /* color is already in map */ - } - - /* Check for map overflow. */ - if (ncolors >= (MAXJSAMPLE+1)) - ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1)); - - /* OK, add color to map. */ - colormap0[ncolors] = (JSAMPLE) R; - colormap1[ncolors] = (JSAMPLE) G; - colormap2[ncolors] = (JSAMPLE) B; - cinfo->actual_number_of_colors++; -} - - -/* - * Extract color map from a GIF file. - */ - -LOCAL(void) -read_gif_map (j_decompress_ptr cinfo, FILE * infile) -{ - int header[13]; - int i, colormaplen; - int R, G, B; - - /* Initial 'G' has already been read by read_color_map */ - /* Read the rest of the GIF header and logical screen descriptor */ - for (i = 1; i < 13; i++) { - if ((header[i] = getc(infile)) == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - } - - /* Verify GIF Header */ - if (header[1] != 'I' || header[2] != 'F') - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - /* There must be a global color map. */ - if ((header[10] & 0x80) == 0) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - /* OK, fetch it. */ - colormaplen = 2 << (header[10] & 0x07); - - for (i = 0; i < colormaplen; i++) { - R = getc(infile); - G = getc(infile); - B = getc(infile); - if (R == EOF || G == EOF || B == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - add_map_entry(cinfo, - R << (BITS_IN_JSAMPLE-8), - G << (BITS_IN_JSAMPLE-8), - B << (BITS_IN_JSAMPLE-8)); - } -} - - -/* Support routines for reading PPM */ - - -LOCAL(int) -pbm_getc (FILE * infile) -/* Read next char, skipping over any comments */ -/* A comment/newline sequence is returned as a newline */ -{ - register int ch; - - ch = getc(infile); - if (ch == '#') { - do { - ch = getc(infile); - } while (ch != '\n' && ch != EOF); - } - return ch; -} - - -LOCAL(unsigned int) -read_pbm_integer (j_decompress_ptr cinfo, FILE * infile) -/* Read an unsigned decimal integer from the PPM file */ -/* Swallows one trailing character after the integer */ -/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ -/* This should not be a problem in practice. */ -{ - register int ch; - register unsigned int val; - - /* Skip any leading whitespace */ - do { - ch = pbm_getc(infile); - if (ch == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); - - if (ch < '0' || ch > '9') - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - val = ch - '0'; - while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { - val *= 10; - val += ch - '0'; - } - return val; -} - - -/* - * Extract color map from a PPM file. - */ - -LOCAL(void) -read_ppm_map (j_decompress_ptr cinfo, FILE * infile) -{ - int c; - unsigned int w, h, maxval, row, col; - int R, G, B; - - /* Initial 'P' has already been read by read_color_map */ - c = getc(infile); /* save format discriminator for a sec */ - - /* while we fetch the remaining header info */ - w = read_pbm_integer(cinfo, infile); - h = read_pbm_integer(cinfo, infile); - maxval = read_pbm_integer(cinfo, infile); - - if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - /* For now, we don't support rescaling from an unusual maxval. */ - if (maxval != (unsigned int) MAXJSAMPLE) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - - switch (c) { - case '3': /* it's a text-format PPM file */ - for (row = 0; row < h; row++) { - for (col = 0; col < w; col++) { - R = read_pbm_integer(cinfo, infile); - G = read_pbm_integer(cinfo, infile); - B = read_pbm_integer(cinfo, infile); - add_map_entry(cinfo, R, G, B); - } - } - break; - - case '6': /* it's a raw-format PPM file */ - for (row = 0; row < h; row++) { - for (col = 0; col < w; col++) { - R = getc(infile); - G = getc(infile); - B = getc(infile); - if (R == EOF || G == EOF || B == EOF) - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - add_map_entry(cinfo, R, G, B); - } - } - break; - - default: - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - break; - } -} - - -/* - * Main entry point from djpeg.c. - * Input: opened input file (from file name argument on command line). - * Output: colormap and actual_number_of_colors fields are set in cinfo. - */ - -GLOBAL(void) -read_color_map (j_decompress_ptr cinfo, FILE * infile) -{ - /* Allocate space for a color map of maximum supported size. */ - cinfo->colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3); - cinfo->actual_number_of_colors = 0; /* initialize map to empty */ - - /* Read first byte to determine file format */ - switch (getc(infile)) { - case 'G': - read_gif_map(cinfo, infile); - break; - case 'P': - read_ppm_map(cinfo, infile); - break; - default: - ERREXIT(cinfo, JERR_BAD_CMAP_FILE); - break; - } -} - -#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/libjpegtwrp/rdgif.c b/libjpegtwrp/rdgif.c deleted file mode 100644 index b27c1675d..000000000 --- a/libjpegtwrp/rdgif.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * rdgif.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in GIF format. - * - ***************************************************************************** - * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * - * the ability to read GIF files has been removed from the IJG distribution. * - * Sorry about that. * - ***************************************************************************** - * - * We are required to state that - * "The Graphics Interchange Format(c) is the Copyright property of - * CompuServe Incorporated. GIF(sm) is a Service Mark property of - * CompuServe Incorporated." - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef GIF_SUPPORTED - -/* - * The module selection routine for GIF format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_gif (j_compress_ptr cinfo) -{ - fprintf(stderr, "GIF input is unsupported for legal reasons. Sorry.\n"); - exit(EXIT_FAILURE); - return NULL; /* keep compiler happy */ -} - -#endif /* GIF_SUPPORTED */ diff --git a/libjpegtwrp/rdjpgcom.1 b/libjpegtwrp/rdjpgcom.1 deleted file mode 100644 index 2bba04e1a..000000000 --- a/libjpegtwrp/rdjpgcom.1 +++ /dev/null @@ -1,54 +0,0 @@ -.TH RDJPGCOM 1 "11 October 1997" -.SH NAME -rdjpgcom \- display text comments from a JPEG file -.SH SYNOPSIS -.B rdjpgcom -[ -.B \-verbose -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B rdjpgcom -reads the named JPEG/JFIF file, or the standard input if no file is named, -and prints any text comments found in the file on the standard output. -.PP -The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. -Although the standard doesn't actually define what COM blocks are for, they -are widely used to hold user-supplied text strings. This lets you add -annotations, titles, index terms, etc to your JPEG files, and later retrieve -them as text. COM blocks do not interfere with the image stored in the JPEG -file. The maximum size of a COM block is 64K, but you can have as many of -them as you like in one JPEG file. -.SH OPTIONS -.TP -.B \-verbose -Causes -.B rdjpgcom -to also display the JPEG image dimensions. -.PP -Switch names may be abbreviated, and are not case sensitive. -.SH HINTS -.B rdjpgcom -does not depend on the IJG JPEG library. Its source code is intended as an -illustration of the minimum amount of code required to parse a JPEG file -header correctly. -.PP -In -.B \-verbose -mode, -.B rdjpgcom -will also attempt to print the contents of any "APP12" markers as text. -Some digital cameras produce APP12 markers containing useful textual -information. If you like, you can modify the source code to print -other APPn marker types as well. -.SH SEE ALSO -.BR cjpeg (1), -.BR djpeg (1), -.BR jpegtran (1), -.BR wrjpgcom (1) -.SH AUTHOR -Independent JPEG Group diff --git a/libjpegtwrp/rdjpgcom.c b/libjpegtwrp/rdjpgcom.c deleted file mode 100644 index ffe6fc621..000000000 --- a/libjpegtwrp/rdjpgcom.c +++ /dev/null @@ -1,496 +0,0 @@ -/* - * rdjpgcom.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a very simple stand-alone application that displays - * the text in COM (comment) markers in a JFIF file. - * This may be useful as an example of the minimum logic needed to parse - * JPEG markers. - */ - -#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ -#include "jinclude.h" /* get auto-config symbols, */ - -#include /* to declare isupper(), tolower() */ -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif - - -/* - * These macros are used to read the input file. - * To reuse this code in another application, you might need to change these. - */ - -static FILE * infile; /* input JPEG file */ - -/* Return next input byte, or EOF if no more */ -#define NEXTBYTE() getc(infile) - - -/* Error exit handler */ -#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) - - -/* Read one byte, testing for EOF */ -static int -read_1_byte (void) -{ - int c; - - c = NEXTBYTE(); - if (c == EOF) - ERREXIT("Premature EOF in JPEG file"); - return c; -} - -/* Read 2 bytes, convert to unsigned int */ -/* All 2-byte quantities in JPEG markers are MSB first */ -static unsigned int -read_2_bytes (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - if (c1 == EOF) - ERREXIT("Premature EOF in JPEG file"); - c2 = NEXTBYTE(); - if (c2 == EOF) - ERREXIT("Premature EOF in JPEG file"); - return (((unsigned int) c1) << 8) + ((unsigned int) c2); -} - - -/* - * JPEG markers consist of one or more 0xFF bytes, followed by a marker - * code byte (which is not an FF). Here are the marker codes of interest - * in this program. (See jdmarker.c for a more complete list.) - */ - -#define M_SOF0 0xC0 /* Start Of Frame N */ -#define M_SOF1 0xC1 /* N indicates which compression process */ -#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ -#define M_SOF3 0xC3 -#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ -#define M_SOF6 0xC6 -#define M_SOF7 0xC7 -#define M_SOF9 0xC9 -#define M_SOF10 0xCA -#define M_SOF11 0xCB -#define M_SOF13 0xCD -#define M_SOF14 0xCE -#define M_SOF15 0xCF -#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ -#define M_EOI 0xD9 /* End Of Image (end of datastream) */ -#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ -#define M_APP0 0xE0 /* Application-specific marker, type N */ -#define M_APP12 0xEC /* (we don't bother to list all 16 APPn's) */ -#define M_COM 0xFE /* COMment */ - - -/* - * Find the next JPEG marker and return its marker code. - * We expect at least one FF byte, possibly more if the compressor used FFs - * to pad the file. - * There could also be non-FF garbage between markers. The treatment of such - * garbage is unspecified; we choose to skip over it but emit a warning msg. - * NB: this routine must not be used after seeing SOS marker, since it will - * not deal correctly with FF/00 sequences in the compressed image data... - */ - -static int -next_marker (void) -{ - int c; - int discarded_bytes = 0; - - /* Find 0xFF byte; count and skip any non-FFs. */ - c = read_1_byte(); - while (c != 0xFF) { - discarded_bytes++; - c = read_1_byte(); - } - /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs - * are legal as pad bytes, so don't count them in discarded_bytes. - */ - do { - c = read_1_byte(); - } while (c == 0xFF); - - if (discarded_bytes != 0) { - fprintf(stderr, "Warning: garbage data found in JPEG file\n"); - } - - return c; -} - - -/* - * Read the initial marker, which should be SOI. - * For a JFIF file, the first two bytes of the file should be literally - * 0xFF M_SOI. To be more general, we could use next_marker, but if the - * input file weren't actually JPEG at all, next_marker might read the whole - * file and then return a misleading error message... - */ - -static int -first_marker (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - c2 = NEXTBYTE(); - if (c1 != 0xFF || c2 != M_SOI) - ERREXIT("Not a JPEG file"); - return c2; -} - - -/* - * Most types of marker are followed by a variable-length parameter segment. - * This routine skips over the parameters for any marker we don't otherwise - * want to process. - * Note that we MUST skip the parameter segment explicitly in order not to - * be fooled by 0xFF bytes that might appear within the parameter segment; - * such bytes do NOT introduce new markers. - */ - -static void -skip_variable (void) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - (void) read_1_byte(); - length--; - } -} - - -/* - * Process a COM marker. - * We want to print out the marker contents as legible text; - * we must guard against non-text junk and varying newline representations. - */ - -static void -process_COM (void) -{ - unsigned int length; - int ch; - int lastch = 0; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - - while (length > 0) { - ch = read_1_byte(); - /* Emit the character in a readable form. - * Nonprintables are converted to \nnn form, - * while \ is converted to \\. - * Newlines in CR, CR/LF, or LF form will be printed as one newline. - */ - if (ch == '\r') { - printf("\n"); - } else if (ch == '\n') { - if (lastch != '\r') - printf("\n"); - } else if (ch == '\\') { - printf("\\\\"); - } else if (isprint(ch)) { - putc(ch, stdout); - } else { - printf("\\%03o", ch); - } - lastch = ch; - length--; - } - printf("\n"); -} - - -/* - * Process a SOFn marker. - * This code is only needed if you want to know the image dimensions... - */ - -static void -process_SOFn (int marker) -{ - unsigned int length; - unsigned int image_height, image_width; - int data_precision, num_components; - const char * process; - int ci; - - length = read_2_bytes(); /* usual parameter length count */ - - data_precision = read_1_byte(); - image_height = read_2_bytes(); - image_width = read_2_bytes(); - num_components = read_1_byte(); - - switch (marker) { - case M_SOF0: process = "Baseline"; break; - case M_SOF1: process = "Extended sequential"; break; - case M_SOF2: process = "Progressive"; break; - case M_SOF3: process = "Lossless"; break; - case M_SOF5: process = "Differential sequential"; break; - case M_SOF6: process = "Differential progressive"; break; - case M_SOF7: process = "Differential lossless"; break; - case M_SOF9: process = "Extended sequential, arithmetic coding"; break; - case M_SOF10: process = "Progressive, arithmetic coding"; break; - case M_SOF11: process = "Lossless, arithmetic coding"; break; - case M_SOF13: process = "Differential sequential, arithmetic coding"; break; - case M_SOF14: process = "Differential progressive, arithmetic coding"; break; - case M_SOF15: process = "Differential lossless, arithmetic coding"; break; - default: process = "Unknown"; break; - } - - printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n", - image_width, image_height, num_components, data_precision); - printf("JPEG process: %s\n", process); - - if (length != (unsigned int) (8 + num_components * 3)) - ERREXIT("Bogus SOF marker length"); - - for (ci = 0; ci < num_components; ci++) { - (void) read_1_byte(); /* Component ID code */ - (void) read_1_byte(); /* H, V sampling factors */ - (void) read_1_byte(); /* Quantization table number */ - } -} - - -/* - * Parse the marker stream until SOS or EOI is seen; - * display any COM markers. - * While the companion program wrjpgcom will always insert COM markers before - * SOFn, other implementations might not, so we scan to SOS before stopping. - * If we were only interested in the image dimensions, we would stop at SOFn. - * (Conversely, if we only cared about COM markers, there would be no need - * for special code to handle SOFn; we could treat it like other markers.) - */ - -static int -scan_JPEG_header (int verbose) -{ - int marker; - - /* Expect SOI at start of file */ - if (first_marker() != M_SOI) - ERREXIT("Expected SOI marker first"); - - /* Scan miscellaneous markers until we reach SOS. */ - for (;;) { - marker = next_marker(); - switch (marker) { - /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, - * treated as SOFn. C4 in particular is actually DHT. - */ - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - case M_SOF2: /* Progressive, Huffman */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_SOF9: /* Extended sequential, arithmetic */ - case M_SOF10: /* Progressive, arithmetic */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - if (verbose) - process_SOFn(marker); - else - skip_variable(); - break; - - case M_SOS: /* stop before hitting compressed data */ - return marker; - - case M_EOI: /* in case it's a tables-only JPEG stream */ - return marker; - - case M_COM: - process_COM(); - break; - - case M_APP12: - /* Some digital camera makers put useful textual information into - * APP12 markers, so we print those out too when in -verbose mode. - */ - if (verbose) { - printf("APP12 contains:\n"); - process_COM(); - } else - skip_variable(); - break; - - default: /* Anything else just gets skipped */ - skip_variable(); /* we assume it has a parameter count... */ - break; - } - } /* end loop */ -} - - -/* Command line parsing code */ - -static const char * progname; /* program name for error messages */ - - -static void -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n"); - - fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname); - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -verbose Also display dimensions of JPEG image\n"); - - exit(EXIT_FAILURE); -} - - -static int -keymatch (char * arg, const char * keyword, int minchars) -/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ -/* keyword is the constant keyword (must be lower case already), */ -/* minchars is length of minimum legal abbreviation. */ -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return 0; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return 0; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return 0; - return 1; /* A-OK */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - int argn; - char * arg; - int verbose = 0; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "rdjpgcom"; /* in case C library doesn't provide it */ - - /* Parse switches, if any */ - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (arg[0] != '-') - break; /* not switch, must be file name */ - arg++; /* advance over '-' */ - if (keymatch(arg, "verbose", 1)) { - verbose++; - } else - usage(); - } - - /* Open the input file. */ - /* Unix style: expect zero or one file name */ - if (argn < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } - if (argn < argc) { - if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdin\n", progname); - exit(EXIT_FAILURE); - } -#else - infile = stdin; -#endif - } - - /* Scan the JPEG headers. */ - (void) scan_JPEG_header(verbose); - - /* All done. */ - exit(EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/libjpegtwrp/rdppm.c b/libjpegtwrp/rdppm.c deleted file mode 100644 index 1df35c1b3..000000000 --- a/libjpegtwrp/rdppm.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * rdppm.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in PPM/PGM format. - * The extended 2-byte-per-sample raw PPM/PGM formats are supported. - * The PBMPLUS library is NOT required to compile this software - * (but it is highly useful as a set of PPM image manipulation programs). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed PPM format). - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef PPM_SUPPORTED - - -/* Portions of this code are based on the PBMPLUS library, which is: -** -** Copyright (C) 1988 by Jef Poskanzer. -** -** Permission to use, copy, modify, and distribute this software and its -** documentation for any purpose and without fee is hereby granted, provided -** that the above copyright notice appear in all copies and that both that -** copyright notice and this permission notice appear in supporting -** documentation. This software is provided "as is" without express or -** implied warranty. -*/ - - -/* Macros to deal with unsigned chars as efficiently as compiler allows */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char U_CHAR; -#define UCH(x) ((int) (x)) -#else /* !HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char U_CHAR; -#define UCH(x) ((int) (x)) -#else -typedef char U_CHAR; -#define UCH(x) ((int) (x) & 0xFF) -#endif -#endif /* HAVE_UNSIGNED_CHAR */ - - -#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) - - -/* - * On most systems, reading individual bytes with getc() is drastically less - * efficient than buffering a row at a time with fread(). On PCs, we must - * allocate the buffer in near data space, because we are assuming small-data - * memory model, wherein fread() can't reach far memory. If you need to - * process very wide images on a PC, you might have to compile in large-memory - * model, or else replace fread() with a getc() loop --- which will be much - * slower. - */ - - -/* Private version of data source object */ - -typedef struct { - struct cjpeg_source_struct pub; /* public fields */ - - U_CHAR *iobuffer; /* non-FAR pointer to I/O buffer */ - JSAMPROW pixrow; /* FAR pointer to same */ - size_t buffer_width; /* width of I/O buffer */ - JSAMPLE *rescale; /* => maxval-remapping array, or NULL */ -} ppm_source_struct; - -typedef ppm_source_struct * ppm_source_ptr; - - -LOCAL(int) -pbm_getc (FILE * infile) -/* Read next char, skipping over any comments */ -/* A comment/newline sequence is returned as a newline */ -{ - register int ch; - - ch = getc(infile); - if (ch == '#') { - do { - ch = getc(infile); - } while (ch != '\n' && ch != EOF); - } - return ch; -} - - -LOCAL(unsigned int) -read_pbm_integer (j_compress_ptr cinfo, FILE * infile) -/* Read an unsigned decimal integer from the PPM file */ -/* Swallows one trailing character after the integer */ -/* Note that on a 16-bit-int machine, only values up to 64k can be read. */ -/* This should not be a problem in practice. */ -{ - register int ch; - register unsigned int val; - - /* Skip any leading whitespace */ - do { - ch = pbm_getc(infile); - if (ch == EOF) - ERREXIT(cinfo, JERR_INPUT_EOF); - } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r'); - - if (ch < '0' || ch > '9') - ERREXIT(cinfo, JERR_PPM_NONNUMERIC); - - val = ch - '0'; - while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') { - val *= 10; - val += ch - '0'; - } - return val; -} - - -/* - * Read one row of pixels. - * - * We provide several different versions depending on input file format. - * In all cases, input is scaled to the size of JSAMPLE. - * - * A really fast path is provided for reading byte/sample raw files with - * maxval = MAXJSAMPLE, which is the normal case for 8-bit data. - */ - - -METHODDEF(JDIMENSION) -get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading text-format PGM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - FILE * infile = source->pub.input_file; - register JSAMPROW ptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading text-format PPM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - FILE * infile = source->pub.input_file; - register JSAMPROW ptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - *ptr++ = rescale[read_pbm_integer(cinfo, infile)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-byte-format PGM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[UCH(*bufferptr++)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-byte-format PPM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - *ptr++ = rescale[UCH(*bufferptr++)]; - *ptr++ = rescale[UCH(*bufferptr++)]; - *ptr++ = rescale[UCH(*bufferptr++)]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE. - * In this case we just read right into the JSAMPLE buffer! - * Note that same code works for PPM and PGM files. - */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - return 1; -} - - -METHODDEF(JDIMENSION) -get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-word-format PGM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - register int temp; - temp = UCH(*bufferptr++); - temp |= UCH(*bufferptr++) << 8; - *ptr++ = rescale[temp]; - } - return 1; -} - - -METHODDEF(JDIMENSION) -get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading raw-word-format PPM files with any maxval */ -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - register JSAMPROW ptr; - register U_CHAR * bufferptr; - register JSAMPLE *rescale = source->rescale; - JDIMENSION col; - - if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width)) - ERREXIT(cinfo, JERR_INPUT_EOF); - ptr = source->pub.buffer[0]; - bufferptr = source->iobuffer; - for (col = cinfo->image_width; col > 0; col--) { - register int temp; - temp = UCH(*bufferptr++); - temp |= UCH(*bufferptr++) << 8; - *ptr++ = rescale[temp]; - temp = UCH(*bufferptr++); - temp |= UCH(*bufferptr++) << 8; - *ptr++ = rescale[temp]; - temp = UCH(*bufferptr++); - temp |= UCH(*bufferptr++) << 8; - *ptr++ = rescale[temp]; - } - return 1; -} - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - ppm_source_ptr source = (ppm_source_ptr) sinfo; - int c; - unsigned int w, h, maxval; - boolean need_iobuffer, use_raw_buffer, need_rescale; - - if (getc(source->pub.input_file) != 'P') - ERREXIT(cinfo, JERR_PPM_NOT); - - c = getc(source->pub.input_file); /* subformat discriminator character */ - - /* detect unsupported variants (ie, PBM) before trying to read header */ - switch (c) { - case '2': /* it's a text-format PGM file */ - case '3': /* it's a text-format PPM file */ - case '5': /* it's a raw-format PGM file */ - case '6': /* it's a raw-format PPM file */ - break; - default: - ERREXIT(cinfo, JERR_PPM_NOT); - break; - } - - /* fetch the remaining header info */ - w = read_pbm_integer(cinfo, source->pub.input_file); - h = read_pbm_integer(cinfo, source->pub.input_file); - maxval = read_pbm_integer(cinfo, source->pub.input_file); - - if (w <= 0 || h <= 0 || maxval <= 0) /* error check */ - ERREXIT(cinfo, JERR_PPM_NOT); - - cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */ - cinfo->image_width = (JDIMENSION) w; - cinfo->image_height = (JDIMENSION) h; - - /* initialize flags to most common settings */ - need_iobuffer = TRUE; /* do we need an I/O buffer? */ - use_raw_buffer = FALSE; /* do we map input buffer onto I/O buffer? */ - need_rescale = TRUE; /* do we need a rescale array? */ - - switch (c) { - case '2': /* it's a text-format PGM file */ - cinfo->input_components = 1; - cinfo->in_color_space = JCS_GRAYSCALE; - TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h); - source->pub.get_pixel_rows = get_text_gray_row; - need_iobuffer = FALSE; - break; - - case '3': /* it's a text-format PPM file */ - cinfo->input_components = 3; - cinfo->in_color_space = JCS_RGB; - TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h); - source->pub.get_pixel_rows = get_text_rgb_row; - need_iobuffer = FALSE; - break; - - case '5': /* it's a raw-format PGM file */ - cinfo->input_components = 1; - cinfo->in_color_space = JCS_GRAYSCALE; - TRACEMS2(cinfo, 1, JTRC_PGM, w, h); - if (maxval > 255) { - source->pub.get_pixel_rows = get_word_gray_row; - } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { - source->pub.get_pixel_rows = get_raw_row; - use_raw_buffer = TRUE; - need_rescale = FALSE; - } else { - source->pub.get_pixel_rows = get_scaled_gray_row; - } - break; - - case '6': /* it's a raw-format PPM file */ - cinfo->input_components = 3; - cinfo->in_color_space = JCS_RGB; - TRACEMS2(cinfo, 1, JTRC_PPM, w, h); - if (maxval > 255) { - source->pub.get_pixel_rows = get_word_rgb_row; - } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) { - source->pub.get_pixel_rows = get_raw_row; - use_raw_buffer = TRUE; - need_rescale = FALSE; - } else { - source->pub.get_pixel_rows = get_scaled_rgb_row; - } - break; - } - - /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */ - if (need_iobuffer) { - source->buffer_width = (size_t) w * cinfo->input_components * - ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR))); - source->iobuffer = (U_CHAR *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - source->buffer_width); - } - - /* Create compressor input buffer. */ - if (use_raw_buffer) { - /* For unscaled raw-input case, we can just map it onto the I/O buffer. */ - /* Synthesize a JSAMPARRAY pointer structure */ - /* Cast here implies near->far pointer conversion on PCs */ - source->pixrow = (JSAMPROW) source->iobuffer; - source->pub.buffer = & source->pixrow; - source->pub.buffer_height = 1; - } else { - /* Need to translate anyway, so make a separate sample buffer. */ - source->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1); - source->pub.buffer_height = 1; - } - - /* Compute the rescaling array if required. */ - if (need_rescale) { - INT32 val, half_maxval; - - /* On 16-bit-int machines we have to be careful of maxval = 65535 */ - source->rescale = (JSAMPLE *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE))); - half_maxval = maxval / 2; - for (val = 0; val <= (INT32) maxval; val++) { - /* The multiplication here must be done in 32 bits to avoid overflow */ - source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval); - } - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for PPM format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_ppm (j_compress_ptr cinfo) -{ - ppm_source_ptr source; - - /* Create module interface object */ - source = (ppm_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ppm_source_struct)); - /* Fill in method ptrs, except get_pixel_rows which start_input sets */ - source->pub.start_input = start_input_ppm; - source->pub.finish_input = finish_input_ppm; - - return (cjpeg_source_ptr) source; -} - -#endif /* PPM_SUPPORTED */ diff --git a/libjpegtwrp/rdrle.c b/libjpegtwrp/rdrle.c deleted file mode 100644 index 542bc3749..000000000 --- a/libjpegtwrp/rdrle.c +++ /dev/null @@ -1,387 +0,0 @@ -/* - * rdrle.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in Utah RLE format. - * The Utah Raster Toolkit library is required (version 3.1 or later). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed RLE format). - * - * Based on code contributed by Mike Lijewski, - * with updates from Robert Hutchinson. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef RLE_SUPPORTED - -/* rle.h is provided by the Utah Raster Toolkit. */ - -#include - -/* - * We assume that JSAMPLE has the same representation as rle_pixel, - * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - -/* - * We support the following types of RLE files: - * - * GRAYSCALE - 8 bits, no colormap - * MAPPEDGRAY - 8 bits, 1 channel colomap - * PSEUDOCOLOR - 8 bits, 3 channel colormap - * TRUECOLOR - 24 bits, 3 channel colormap - * DIRECTCOLOR - 24 bits, no colormap - * - * For now, we ignore any alpha channel in the image. - */ - -typedef enum - { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind; - - -/* - * Since RLE stores scanlines bottom-to-top, we have to invert the image - * to conform to JPEG's top-to-bottom order. To do this, we read the - * incoming image into a virtual array on the first get_pixel_rows call, - * then fetch the required row from the virtual array on subsequent calls. - */ - -typedef struct _rle_source_struct * rle_source_ptr; - -typedef struct _rle_source_struct { - struct cjpeg_source_struct pub; /* public fields */ - - rle_kind visual; /* actual type of input file */ - jvirt_sarray_ptr image; /* virtual array to hold the image */ - JDIMENSION row; /* current row # in the virtual array */ - rle_hdr header; /* Input file information */ - rle_pixel** rle_row; /* holds a row returned by rle_getrow() */ - -} rle_source_struct; - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - JDIMENSION width, height; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - /* Use RLE library routine to get the header info */ - source->header = *rle_hdr_init(NULL); - source->header.rle_file = source->pub.input_file; - switch (rle_get_setup(&(source->header))) { - case RLE_SUCCESS: - /* A-OK */ - break; - case RLE_NOT_RLE: - ERREXIT(cinfo, JERR_RLE_NOT); - break; - case RLE_NO_SPACE: - ERREXIT(cinfo, JERR_RLE_MEM); - break; - case RLE_EMPTY: - ERREXIT(cinfo, JERR_RLE_EMPTY); - break; - case RLE_EOF: - ERREXIT(cinfo, JERR_RLE_EOF); - break; - default: - ERREXIT(cinfo, JERR_RLE_BADERROR); - break; - } - - /* Figure out what we have, set private vars and return values accordingly */ - - width = source->header.xmax - source->header.xmin + 1; - height = source->header.ymax - source->header.ymin + 1; - source->header.xmin = 0; /* realign horizontally */ - source->header.xmax = width-1; - - cinfo->image_width = width; - cinfo->image_height = height; - cinfo->data_precision = 8; /* we can only handle 8 bit data */ - - if (source->header.ncolors == 1 && source->header.ncmap == 0) { - source->visual = GRAYSCALE; - TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height); - } else if (source->header.ncolors == 1 && source->header.ncmap == 1) { - source->visual = MAPPEDGRAY; - TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height, - 1 << source->header.cmaplen); - } else if (source->header.ncolors == 1 && source->header.ncmap == 3) { - source->visual = PSEUDOCOLOR; - TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height, - 1 << source->header.cmaplen); - } else if (source->header.ncolors == 3 && source->header.ncmap == 3) { - source->visual = TRUECOLOR; - TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height, - 1 << source->header.cmaplen); - } else if (source->header.ncolors == 3 && source->header.ncmap == 0) { - source->visual = DIRECTCOLOR; - TRACEMS2(cinfo, 1, JTRC_RLE, width, height); - } else - ERREXIT(cinfo, JERR_RLE_UNSUPPORTED); - - if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) { - cinfo->in_color_space = JCS_GRAYSCALE; - cinfo->input_components = 1; - } else { - cinfo->in_color_space = JCS_RGB; - cinfo->input_components = 3; - } - - /* - * A place to hold each scanline while it's converted. - * (GRAYSCALE scanlines don't need converting) - */ - if (source->visual != GRAYSCALE) { - source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) width, (JDIMENSION) cinfo->input_components); - } - - /* request a virtual array to hold the image */ - source->image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) (width * source->header.ncolors), - (JDIMENSION) height, (JDIMENSION) 1); - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - /* count file input as separate pass */ - progress->total_extra_passes++; - } -#endif - - source->pub.buffer_height = 1; -} - - -/* - * Read one row of pixels. - * Called only after load_image has read the image into the virtual array. - * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images. - */ - -METHODDEF(JDIMENSION) -get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - - source->row--; - source->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); - - return 1; -} - -/* - * Read one row of pixels. - * Called only after load_image has read the image into the virtual array. - * Used for PSEUDOCOLOR images. - */ - -METHODDEF(JDIMENSION) -get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - JSAMPROW src_row, dest_row; - JDIMENSION col; - rle_map *colormap; - int val; - - colormap = source->header.cmap; - dest_row = source->pub.buffer[0]; - source->row--; - src_row = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE); - - for (col = cinfo->image_width; col > 0; col--) { - val = GETJSAMPLE(*src_row++); - *dest_row++ = (JSAMPLE) (colormap[val ] >> 8); - *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8); - *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8); - } - - return 1; -} - - -/* - * Load the image into a virtual array. We have to do this because RLE - * files start at the lower left while the JPEG standard has them starting - * in the upper left. This is called the first time we want to get a row - * of input. What we do is load the RLE data into the array and then call - * the appropriate routine to read one row from the array. Before returning, - * we set source->pub.get_pixel_rows so that subsequent calls go straight to - * the appropriate row-reading routine. - */ - -METHODDEF(JDIMENSION) -load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - rle_source_ptr source = (rle_source_ptr) sinfo; - JDIMENSION row, col; - JSAMPROW scanline, red_ptr, green_ptr, blue_ptr; - rle_pixel **rle_row; - rle_map *colormap; - char channel; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - colormap = source->header.cmap; - rle_row = source->rle_row; - - /* Read the RLE data into our virtual array. - * We assume here that (a) rle_pixel is represented the same as JSAMPLE, - * and (b) we are not on a machine where FAR pointers differ from regular. - */ - RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */ - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_limit = cinfo->image_height; - progress->pub.pass_counter = 0; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - - switch (source->visual) { - - case GRAYSCALE: - case PSEUDOCOLOR: - for (row = 0; row < cinfo->image_height; row++) { - rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); - rle_getrow(&source->header, rle_row); -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - break; - - case MAPPEDGRAY: - case TRUECOLOR: - for (row = 0; row < cinfo->image_height; row++) { - scanline = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); - rle_row = source->rle_row; - rle_getrow(&source->header, rle_row); - - for (col = 0; col < cinfo->image_width; col++) { - for (channel = 0; channel < source->header.ncolors; channel++) { - *scanline++ = (JSAMPLE) - (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8); - } - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - break; - - case DIRECTCOLOR: - for (row = 0; row < cinfo->image_height; row++) { - scanline = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE); - rle_getrow(&source->header, rle_row); - - red_ptr = rle_row[0]; - green_ptr = rle_row[1]; - blue_ptr = rle_row[2]; - - for (col = cinfo->image_width; col > 0; col--) { - *scanline++ = *red_ptr++; - *scanline++ = *green_ptr++; - *scanline++ = *blue_ptr++; - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) - progress->completed_extra_passes++; -#endif - - /* Set up to call proper row-extraction routine in future */ - if (source->visual == PSEUDOCOLOR) { - source->pub.buffer = source->rle_row; - source->pub.get_pixel_rows = get_pseudocolor_row; - } else { - source->pub.get_pixel_rows = get_rle_row; - } - source->row = cinfo->image_height; - - /* And fetch the topmost (bottommost) row */ - return (*source->pub.get_pixel_rows) (cinfo, sinfo); -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for RLE format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_rle (j_compress_ptr cinfo) -{ - rle_source_ptr source; - - /* Create module interface object */ - source = (rle_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(rle_source_struct)); - /* Fill in method ptrs */ - source->pub.start_input = start_input_rle; - source->pub.finish_input = finish_input_rle; - source->pub.get_pixel_rows = load_image; - - return (cjpeg_source_ptr) source; -} - -#endif /* RLE_SUPPORTED */ diff --git a/libjpegtwrp/rdswitch.c b/libjpegtwrp/rdswitch.c deleted file mode 100644 index 4f4bb4f58..000000000 --- a/libjpegtwrp/rdswitch.c +++ /dev/null @@ -1,332 +0,0 @@ -/* - * rdswitch.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to process some of cjpeg's more complicated - * command-line switches. Switches processed here are: - * -qtables file Read quantization tables from text file - * -scans file Read scan script from text file - * -qslots N[,N,...] Set component quantization table selectors - * -sample HxV[,HxV,...] Set component sampling factors - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ -#include /* to declare isdigit(), isspace() */ - - -LOCAL(int) -text_getc (FILE * file) -/* Read next char, skipping over any comments (# to end of line) */ -/* A comment/newline sequence is returned as a newline */ -{ - register int ch; - - ch = getc(file); - if (ch == '#') { - do { - ch = getc(file); - } while (ch != '\n' && ch != EOF); - } - return ch; -} - - -LOCAL(boolean) -read_text_integer (FILE * file, long * result, int * termchar) -/* Read an unsigned decimal integer from a file, store it in result */ -/* Reads one trailing character after the integer; returns it in termchar */ -{ - register int ch; - register long val; - - /* Skip any leading whitespace, detect EOF */ - do { - ch = text_getc(file); - if (ch == EOF) { - *termchar = ch; - return FALSE; - } - } while (isspace(ch)); - - if (! isdigit(ch)) { - *termchar = ch; - return FALSE; - } - - val = ch - '0'; - while ((ch = text_getc(file)) != EOF) { - if (! isdigit(ch)) - break; - val *= 10; - val += ch - '0'; - } - *result = val; - *termchar = ch; - return TRUE; -} - - -GLOBAL(boolean) -read_quant_tables (j_compress_ptr cinfo, char * filename, - int scale_factor, boolean force_baseline) -/* Read a set of quantization tables from the specified file. - * The file is plain ASCII text: decimal numbers with whitespace between. - * Comments preceded by '#' may be included in the file. - * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. - * The tables are implicitly numbered 0,1,etc. - * NOTE: does not affect the qslots mapping, which will default to selecting - * table 0 for luminance (or primary) components, 1 for chrominance components. - * You must use -qslots if you want a different component->table mapping. - */ -{ - FILE * fp; - int tblno, i, termchar; - long val; - unsigned int table[DCTSIZE2]; - - if ((fp = fopen(filename, "r")) == NULL) { - fprintf(stderr, "Can't open table file %s\n", filename); - return FALSE; - } - tblno = 0; - - while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ - if (tblno >= NUM_QUANT_TBLS) { - fprintf(stderr, "Too many tables in file %s\n", filename); - fclose(fp); - return FALSE; - } - table[0] = (unsigned int) val; - for (i = 1; i < DCTSIZE2; i++) { - if (! read_text_integer(fp, &val, &termchar)) { - fprintf(stderr, "Invalid table data in file %s\n", filename); - fclose(fp); - return FALSE; - } - table[i] = (unsigned int) val; - } - jpeg_add_quant_table(cinfo, tblno, table, scale_factor, force_baseline); - tblno++; - } - - if (termchar != EOF) { - fprintf(stderr, "Non-numeric data in file %s\n", filename); - fclose(fp); - return FALSE; - } - - fclose(fp); - return TRUE; -} - - -#ifdef C_MULTISCAN_FILES_SUPPORTED - -LOCAL(boolean) -read_scan_integer (FILE * file, long * result, int * termchar) -/* Variant of read_text_integer that always looks for a non-space termchar; - * this simplifies parsing of punctuation in scan scripts. - */ -{ - register int ch; - - if (! read_text_integer(file, result, termchar)) - return FALSE; - ch = *termchar; - while (ch != EOF && isspace(ch)) - ch = text_getc(file); - if (isdigit(ch)) { /* oops, put it back */ - if (ungetc(ch, file) == EOF) - return FALSE; - ch = ' '; - } else { - /* Any separators other than ';' and ':' are ignored; - * this allows user to insert commas, etc, if desired. - */ - if (ch != EOF && ch != ';' && ch != ':') - ch = ' '; - } - *termchar = ch; - return TRUE; -} - - -GLOBAL(boolean) -read_scan_script (j_compress_ptr cinfo, char * filename) -/* Read a scan script from the specified text file. - * Each entry in the file defines one scan to be emitted. - * Entries are separated by semicolons ';'. - * An entry contains one to four component indexes, - * optionally followed by a colon ':' and four progressive-JPEG parameters. - * The component indexes denote which component(s) are to be transmitted - * in the current scan. The first component has index 0. - * Sequential JPEG is used if the progressive-JPEG parameters are omitted. - * The file is free format text: any whitespace may appear between numbers - * and the ':' and ';' punctuation marks. Also, other punctuation (such - * as commas or dashes) can be placed between numbers if desired. - * Comments preceded by '#' may be included in the file. - * Note: we do very little validity checking here; - * jcmaster.c will validate the script parameters. - */ -{ - FILE * fp; - int scanno, ncomps, termchar; - long val; - jpeg_scan_info * scanptr; -#define MAX_SCANS 100 /* quite arbitrary limit */ - jpeg_scan_info scans[MAX_SCANS]; - - if ((fp = fopen(filename, "r")) == NULL) { - fprintf(stderr, "Can't open scan definition file %s\n", filename); - return FALSE; - } - scanptr = scans; - scanno = 0; - - while (read_scan_integer(fp, &val, &termchar)) { - if (scanno >= MAX_SCANS) { - fprintf(stderr, "Too many scans defined in file %s\n", filename); - fclose(fp); - return FALSE; - } - scanptr->component_index[0] = (int) val; - ncomps = 1; - while (termchar == ' ') { - if (ncomps >= MAX_COMPS_IN_SCAN) { - fprintf(stderr, "Too many components in one scan in file %s\n", - filename); - fclose(fp); - return FALSE; - } - if (! read_scan_integer(fp, &val, &termchar)) - goto bogus; - scanptr->component_index[ncomps] = (int) val; - ncomps++; - } - scanptr->comps_in_scan = ncomps; - if (termchar == ':') { - if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') - goto bogus; - scanptr->Ss = (int) val; - if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') - goto bogus; - scanptr->Se = (int) val; - if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') - goto bogus; - scanptr->Ah = (int) val; - if (! read_scan_integer(fp, &val, &termchar)) - goto bogus; - scanptr->Al = (int) val; - } else { - /* set non-progressive parameters */ - scanptr->Ss = 0; - scanptr->Se = DCTSIZE2-1; - scanptr->Ah = 0; - scanptr->Al = 0; - } - if (termchar != ';' && termchar != EOF) { -bogus: - fprintf(stderr, "Invalid scan entry format in file %s\n", filename); - fclose(fp); - return FALSE; - } - scanptr++, scanno++; - } - - if (termchar != EOF) { - fprintf(stderr, "Non-numeric data in file %s\n", filename); - fclose(fp); - return FALSE; - } - - if (scanno > 0) { - /* Stash completed scan list in cinfo structure. - * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, - * but if you want to compress multiple images you'd want JPOOL_PERMANENT. - */ - scanptr = (jpeg_scan_info *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - scanno * SIZEOF(jpeg_scan_info)); - MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); - cinfo->scan_info = scanptr; - cinfo->num_scans = scanno; - } - - fclose(fp); - return TRUE; -} - -#endif /* C_MULTISCAN_FILES_SUPPORTED */ - - -GLOBAL(boolean) -set_quant_slots (j_compress_ptr cinfo, char *arg) -/* Process a quantization-table-selectors parameter string, of the form - * N[,N,...] - * If there are more components than parameters, the last value is replicated. - */ -{ - int val = 0; /* default table # */ - int ci; - char ch; - - for (ci = 0; ci < MAX_COMPONENTS; ci++) { - if (*arg) { - ch = ','; /* if not set by sscanf, will be ',' */ - if (sscanf(arg, "%d%c", &val, &ch) < 1) - return FALSE; - if (ch != ',') /* syntax check */ - return FALSE; - if (val < 0 || val >= NUM_QUANT_TBLS) { - fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", - NUM_QUANT_TBLS-1); - return FALSE; - } - cinfo->comp_info[ci].quant_tbl_no = val; - while (*arg && *arg++ != ',') /* advance to next segment of arg string */ - ; - } else { - /* reached end of parameter, set remaining components to last table */ - cinfo->comp_info[ci].quant_tbl_no = val; - } - } - return TRUE; -} - - -GLOBAL(boolean) -set_sample_factors (j_compress_ptr cinfo, char *arg) -/* Process a sample-factors parameter string, of the form - * HxV[,HxV,...] - * If there are more components than parameters, "1x1" is assumed for the rest. - */ -{ - int ci, val1, val2; - char ch1, ch2; - - for (ci = 0; ci < MAX_COMPONENTS; ci++) { - if (*arg) { - ch2 = ','; /* if not set by sscanf, will be ',' */ - if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) - return FALSE; - if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ - return FALSE; - if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) { - fprintf(stderr, "JPEG sampling factors must be 1..4\n"); - return FALSE; - } - cinfo->comp_info[ci].h_samp_factor = val1; - cinfo->comp_info[ci].v_samp_factor = val2; - while (*arg && *arg++ != ',') /* advance to next segment of arg string */ - ; - } else { - /* reached end of parameter, set remaining components to 1x1 sampling */ - cinfo->comp_info[ci].h_samp_factor = 1; - cinfo->comp_info[ci].v_samp_factor = 1; - } - } - return TRUE; -} diff --git a/libjpegtwrp/rdtarga.c b/libjpegtwrp/rdtarga.c deleted file mode 100644 index 4c2cd2673..000000000 --- a/libjpegtwrp/rdtarga.c +++ /dev/null @@ -1,500 +0,0 @@ -/* - * rdtarga.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to read input images in Targa format. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume input from - * an ordinary stdio stream. They further assume that reading begins - * at the start of the file; start_input may need work if the - * user interface has already read some data (e.g., to determine that - * the file is indeed Targa format). - * - * Based on code contributed by Lee Daniel Crocker. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef TARGA_SUPPORTED - - -/* Macros to deal with unsigned chars as efficiently as compiler allows */ - -#ifdef HAVE_UNSIGNED_CHAR -typedef unsigned char U_CHAR; -#define UCH(x) ((int) (x)) -#else /* !HAVE_UNSIGNED_CHAR */ -#ifdef CHAR_IS_UNSIGNED -typedef char U_CHAR; -#define UCH(x) ((int) (x)) -#else -typedef char U_CHAR; -#define UCH(x) ((int) (x) & 0xFF) -#endif -#endif /* HAVE_UNSIGNED_CHAR */ - - -#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len))) - - -/* Private version of data source object */ - -typedef struct _tga_source_struct * tga_source_ptr; - -typedef struct _tga_source_struct { - struct cjpeg_source_struct pub; /* public fields */ - - j_compress_ptr cinfo; /* back link saves passing separate parm */ - - JSAMPARRAY colormap; /* Targa colormap (converted to my format) */ - - jvirt_sarray_ptr whole_image; /* Needed if funny input row order */ - JDIMENSION current_row; /* Current logical row number to read */ - - /* Pointer to routine to extract next Targa pixel from input file */ - JMETHOD(void, read_pixel, (tga_source_ptr sinfo)); - - /* Result of read_pixel is delivered here: */ - U_CHAR tga_pixel[4]; - - int pixel_size; /* Bytes per Targa pixel (1 to 4) */ - - /* State info for reading RLE-coded pixels; both counts must be init to 0 */ - int block_count; /* # of pixels remaining in RLE block */ - int dup_pixel_count; /* # of times to duplicate previous pixel */ - - /* This saves the correct pixel-row-expansion method for preload_image */ - JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, - cjpeg_source_ptr sinfo)); -} tga_source_struct; - - -/* For expanding 5-bit pixel values to 8-bit with best rounding */ - -static const UINT8 c5to8bits[32] = { - 0, 8, 16, 25, 33, 41, 49, 58, - 66, 74, 82, 90, 99, 107, 115, 123, - 132, 140, 148, 156, 165, 173, 181, 189, - 197, 206, 214, 222, 230, 239, 247, 255 -}; - - - -LOCAL(int) -read_byte (tga_source_ptr sinfo) -/* Read next byte from Targa file */ -{ - register FILE *infile = sinfo->pub.input_file; - register int c; - - if ((c = getc(infile)) == EOF) - ERREXIT(sinfo->cinfo, JERR_INPUT_EOF); - return c; -} - - -LOCAL(void) -read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize) -/* Read the colormap from a Targa file */ -{ - int i; - - /* Presently only handles 24-bit BGR format */ - if (mapentrysize != 24) - ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP); - - for (i = 0; i < cmaplen; i++) { - sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo); - sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo); - } -} - - -/* - * read_pixel methods: get a single pixel from Targa file into tga_pixel[] - */ - -METHODDEF(void) -read_non_rle_pixel (tga_source_ptr sinfo) -/* Read one Targa pixel from the input file; no RLE expansion */ -{ - register FILE *infile = sinfo->pub.input_file; - register int i; - - for (i = 0; i < sinfo->pixel_size; i++) { - sinfo->tga_pixel[i] = (U_CHAR) getc(infile); - } -} - - -METHODDEF(void) -read_rle_pixel (tga_source_ptr sinfo) -/* Read one Targa pixel from the input file, expanding RLE data as needed */ -{ - register FILE *infile = sinfo->pub.input_file; - register int i; - - /* Duplicate previously read pixel? */ - if (sinfo->dup_pixel_count > 0) { - sinfo->dup_pixel_count--; - return; - } - - /* Time to read RLE block header? */ - if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */ - i = read_byte(sinfo); - if (i & 0x80) { /* Start of duplicate-pixel block? */ - sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */ - sinfo->block_count = 0; /* then read new block header */ - } else { - sinfo->block_count = i & 0x7F; /* number of pixels after this one */ - } - } - - /* Read next pixel */ - for (i = 0; i < sinfo->pixel_size; i++) { - sinfo->tga_pixel[i] = (U_CHAR) getc(infile); - } -} - - -/* - * Read one row of pixels. - * - * We provide several different versions depending on input file format. - */ - - -METHODDEF(JDIMENSION) -get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 8-bit grayscale pixels */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); - } - return 1; -} - -METHODDEF(JDIMENSION) -get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 8-bit colormap indexes */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register int t; - register JSAMPROW ptr; - register JDIMENSION col; - register JSAMPARRAY colormap = source->colormap; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - t = UCH(source->tga_pixel[0]); - *ptr++ = colormap[0][t]; - *ptr++ = colormap[1][t]; - *ptr++ = colormap[2][t]; - } - return 1; -} - -METHODDEF(JDIMENSION) -get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 16-bit pixels */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register int t; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - t = UCH(source->tga_pixel[0]); - t += UCH(source->tga_pixel[1]) << 8; - /* We expand 5 bit data to 8 bit sample width. - * The format of the 16-bit (LSB first) input word is - * xRRRRRGGGGGBBBBB - */ - ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F]; - t >>= 5; - ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F]; - t >>= 5; - ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F]; - ptr += 3; - } - return 1; -} - -METHODDEF(JDIMENSION) -get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -/* This version is for reading 24-bit pixels */ -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = source->pub.buffer[0]; - for (col = cinfo->image_width; col > 0; col--) { - (*source->read_pixel) (source); /* Load next pixel into tga_pixel */ - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */ - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]); - *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]); - } - return 1; -} - -/* - * Targa also defines a 32-bit pixel format with order B,G,R,A. - * We presently ignore the attribute byte, so the code for reading - * these pixels is identical to the 24-bit routine above. - * This works because the actual pixel length is only known to read_pixel. - */ - -#define get_32bit_row get_24bit_row - - -/* - * This method is for re-reading the input data in standard top-down - * row order. The entire image has already been read into whole_image - * with proper conversion of pixel format, but it's in a funny row order. - */ - -METHODDEF(JDIMENSION) -get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - JDIMENSION source_row; - - /* Compute row of source that maps to current_row of normal order */ - /* For now, assume image is bottom-up and not interlaced. */ - /* NEEDS WORK to support interlaced images! */ - source_row = cinfo->image_height - source->current_row - 1; - - /* Fetch that row from virtual array */ - source->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, - source_row, (JDIMENSION) 1, FALSE); - - source->current_row++; - return 1; -} - - -/* - * This method loads the image into whole_image during the first call on - * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call - * get_memory_row on subsequent calls. - */ - -METHODDEF(JDIMENSION) -preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - JDIMENSION row; - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - - /* Read the data into a virtual array in input-file row order. */ - for (row = 0; row < cinfo->image_height; row++) { - if (progress != NULL) { - progress->pub.pass_counter = (long) row; - progress->pub.pass_limit = (long) cinfo->image_height; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } - source->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE); - (*source->get_pixel_rows) (cinfo, sinfo); - } - if (progress != NULL) - progress->completed_extra_passes++; - - /* Set up to read from the virtual array in unscrambled order */ - source->pub.get_pixel_rows = get_memory_row; - source->current_row = 0; - /* And read the first row */ - return get_memory_row(cinfo, sinfo); -} - - -/* - * Read the file header; return image size and component count. - */ - -METHODDEF(void) -start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - tga_source_ptr source = (tga_source_ptr) sinfo; - U_CHAR targaheader[18]; - int idlen, cmaptype, subtype, flags, interlace_type, components; - unsigned int width, height, maplen; - boolean is_bottom_up; - -#define GET_2B(offset) ((unsigned int) UCH(targaheader[offset]) + \ - (((unsigned int) UCH(targaheader[offset+1])) << 8)) - - if (! ReadOK(source->pub.input_file, targaheader, 18)) - ERREXIT(cinfo, JERR_INPUT_EOF); - - /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */ - if (targaheader[16] == 15) - targaheader[16] = 16; - - idlen = UCH(targaheader[0]); - cmaptype = UCH(targaheader[1]); - subtype = UCH(targaheader[2]); - maplen = GET_2B(5); - width = GET_2B(12); - height = GET_2B(14); - source->pixel_size = UCH(targaheader[16]) >> 3; - flags = UCH(targaheader[17]); /* Image Descriptor byte */ - - is_bottom_up = ((flags & 0x20) == 0); /* bit 5 set => top-down */ - interlace_type = flags >> 6; /* bits 6/7 are interlace code */ - - if (cmaptype > 1 || /* cmaptype must be 0 or 1 */ - source->pixel_size < 1 || source->pixel_size > 4 || - (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */ - interlace_type != 0) /* currently don't allow interlaced image */ - ERREXIT(cinfo, JERR_TGA_BADPARMS); - - if (subtype > 8) { - /* It's an RLE-coded file */ - source->read_pixel = read_rle_pixel; - source->block_count = source->dup_pixel_count = 0; - subtype -= 8; - } else { - /* Non-RLE file */ - source->read_pixel = read_non_rle_pixel; - } - - /* Now should have subtype 1, 2, or 3 */ - components = 3; /* until proven different */ - cinfo->in_color_space = JCS_RGB; - - switch (subtype) { - case 1: /* Colormapped image */ - if (source->pixel_size == 1 && cmaptype == 1) - source->get_pixel_rows = get_8bit_row; - else - ERREXIT(cinfo, JERR_TGA_BADPARMS); - TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height); - break; - case 2: /* RGB image */ - switch (source->pixel_size) { - case 2: - source->get_pixel_rows = get_16bit_row; - break; - case 3: - source->get_pixel_rows = get_24bit_row; - break; - case 4: - source->get_pixel_rows = get_32bit_row; - break; - default: - ERREXIT(cinfo, JERR_TGA_BADPARMS); - break; - } - TRACEMS2(cinfo, 1, JTRC_TGA, width, height); - break; - case 3: /* Grayscale image */ - components = 1; - cinfo->in_color_space = JCS_GRAYSCALE; - if (source->pixel_size == 1) - source->get_pixel_rows = get_8bit_gray_row; - else - ERREXIT(cinfo, JERR_TGA_BADPARMS); - TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height); - break; - default: - ERREXIT(cinfo, JERR_TGA_BADPARMS); - break; - } - - if (is_bottom_up) { - /* Create a virtual array to buffer the upside-down image. */ - source->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1); - if (cinfo->progress != NULL) { - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - progress->total_extra_passes++; /* count file input as separate pass */ - } - /* source->pub.buffer will point to the virtual array. */ - source->pub.buffer_height = 1; /* in case anyone looks at it */ - source->pub.get_pixel_rows = preload_image; - } else { - /* Don't need a virtual array, but do need a one-row input buffer. */ - source->whole_image = NULL; - source->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - (JDIMENSION) width * components, (JDIMENSION) 1); - source->pub.buffer_height = 1; - source->pub.get_pixel_rows = source->get_pixel_rows; - } - - while (idlen--) /* Throw away ID field */ - (void) read_byte(source); - - if (maplen > 0) { - if (maplen > 256 || GET_2B(3) != 0) - ERREXIT(cinfo, JERR_TGA_BADCMAP); - /* Allocate space to store the colormap */ - source->colormap = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3); - /* and read it from the file */ - read_colormap(source, (int) maplen, UCH(targaheader[7])); - } else { - if (cmaptype) /* but you promised a cmap! */ - ERREXIT(cinfo, JERR_TGA_BADPARMS); - source->colormap = NULL; - } - - cinfo->input_components = components; - cinfo->data_precision = 8; - cinfo->image_width = width; - cinfo->image_height = height; -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo) -{ - /* no work */ -} - - -/* - * The module selection routine for Targa format input. - */ - -GLOBAL(cjpeg_source_ptr) -jinit_read_targa (j_compress_ptr cinfo) -{ - tga_source_ptr source; - - /* Create module interface object */ - source = (tga_source_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(tga_source_struct)); - source->cinfo = cinfo; /* make back link for subroutines */ - /* Fill in method ptrs, except get_pixel_rows which start_input sets */ - source->pub.start_input = start_input_tga; - source->pub.finish_input = finish_input_tga; - - return (cjpeg_source_ptr) source; -} - -#endif /* TARGA_SUPPORTED */ diff --git a/libjpegtwrp/structure.doc b/libjpegtwrp/structure.doc deleted file mode 100644 index 51c9def7e..000000000 --- a/libjpegtwrp/structure.doc +++ /dev/null @@ -1,948 +0,0 @@ -IJG JPEG LIBRARY: SYSTEM ARCHITECTURE - -Copyright (C) 1991-1995, Thomas G. Lane. -This file is part of the Independent JPEG Group's software. -For conditions of distribution and use, see the accompanying README file. - - -This file provides an overview of the architecture of the IJG JPEG software; -that is, the functions of the various modules in the system and the interfaces -between modules. For more precise details about any data structure or calling -convention, see the include files and comments in the source code. - -We assume that the reader is already somewhat familiar with the JPEG standard. -The README file includes references for learning about JPEG. The file -libjpeg.doc describes the library from the viewpoint of an application -programmer using the library; it's best to read that file before this one. -Also, the file coderules.doc describes the coding style conventions we use. - -In this document, JPEG-specific terminology follows the JPEG standard: - A "component" means a color channel, e.g., Red or Luminance. - A "sample" is a single component value (i.e., one number in the image data). - A "coefficient" is a frequency coefficient (a DCT transform output number). - A "block" is an 8x8 group of samples or coefficients. - An "MCU" (minimum coded unit) is an interleaved set of blocks of size - determined by the sampling factors, or a single block in a - noninterleaved scan. -We do not use the terms "pixel" and "sample" interchangeably. When we say -pixel, we mean an element of the full-size image, while a sample is an element -of the downsampled image. Thus the number of samples may vary across -components while the number of pixels does not. (This terminology is not used -rigorously throughout the code, but it is used in places where confusion would -otherwise result.) - - -*** System features *** - -The IJG distribution contains two parts: - * A subroutine library for JPEG compression and decompression. - * cjpeg/djpeg, two sample applications that use the library to transform - JFIF JPEG files to and from several other image formats. -cjpeg/djpeg are of no great intellectual complexity: they merely add a simple -command-line user interface and I/O routines for several uncompressed image -formats. This document concentrates on the library itself. - -We desire the library to be capable of supporting all JPEG baseline, extended -sequential, and progressive DCT processes. Hierarchical processes are not -supported. - -The library does not support the lossless (spatial) JPEG process. Lossless -JPEG shares little or no code with lossy JPEG, and would normally be used -without the extensive pre- and post-processing provided by this library. -We feel that lossless JPEG is better handled by a separate library. - -Within these limits, any set of compression parameters allowed by the JPEG -spec should be readable for decompression. (We can be more restrictive about -what formats we can generate.) Although the system design allows for all -parameter values, some uncommon settings are not yet implemented and may -never be; nonintegral sampling ratios are the prime example. Furthermore, -we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a -run-time option, because most machines can store 8-bit pixels much more -compactly than 12-bit. - -For legal reasons, JPEG arithmetic coding is not currently supported, but -extending the library to include it would be straightforward. - -By itself, the library handles only interchange JPEG datastreams --- in -particular the widely used JFIF file format. The library can be used by -surrounding code to process interchange or abbreviated JPEG datastreams that -are embedded in more complex file formats. (For example, libtiff uses this -library to implement JPEG compression within the TIFF file format.) - -The library includes a substantial amount of code that is not covered by the -JPEG standard but is necessary for typical applications of JPEG. These -functions preprocess the image before JPEG compression or postprocess it after -decompression. They include colorspace conversion, downsampling/upsampling, -and color quantization. This code can be omitted if not needed. - -A wide range of quality vs. speed tradeoffs are possible in JPEG processing, -and even more so in decompression postprocessing. The decompression library -provides multiple implementations that cover most of the useful tradeoffs, -ranging from very-high-quality down to fast-preview operation. On the -compression side we have generally not provided low-quality choices, since -compression is normally less time-critical. It should be understood that the -low-quality modes may not meet the JPEG standard's accuracy requirements; -nonetheless, they are useful for viewers. - - -*** Portability issues *** - -Portability is an essential requirement for the library. The key portability -issues that show up at the level of system architecture are: - -1. Memory usage. We want the code to be able to run on PC-class machines -with limited memory. Images should therefore be processed sequentially (in -strips), to avoid holding the whole image in memory at once. Where a -full-image buffer is necessary, we should be able to use either virtual memory -or temporary files. - -2. Near/far pointer distinction. To run efficiently on 80x86 machines, the -code should distinguish "small" objects (kept in near data space) from -"large" ones (kept in far data space). This is an annoying restriction, but -fortunately it does not impact code quality for less brain-damaged machines, -and the source code clutter turns out to be minimal with sufficient use of -pointer typedefs. - -3. Data precision. We assume that "char" is at least 8 bits, "short" and -"int" at least 16, "long" at least 32. The code will work fine with larger -data sizes, although memory may be used inefficiently in some cases. However, -the JPEG compressed datastream must ultimately appear on external storage as a -sequence of 8-bit bytes if it is to conform to the standard. This may pose a -problem on machines where char is wider than 8 bits. The library represents -compressed data as an array of values of typedef JOCTET. If no data type -exactly 8 bits wide is available, custom data source and data destination -modules must be written to unpack and pack the chosen JOCTET datatype into -8-bit external representation. - - -*** System overview *** - -The compressor and decompressor are each divided into two main sections: -the JPEG compressor or decompressor proper, and the preprocessing or -postprocessing functions. The interface between these two sections is the -image data that the official JPEG spec regards as its input or output: this -data is in the colorspace to be used for compression, and it is downsampled -to the sampling factors to be used. The preprocessing and postprocessing -steps are responsible for converting a normal image representation to or from -this form. (Those few applications that want to deal with YCbCr downsampled -data can skip the preprocessing or postprocessing step.) - -Looking more closely, the compressor library contains the following main -elements: - - Preprocessing: - * Color space conversion (e.g., RGB to YCbCr). - * Edge expansion and downsampling. Optionally, this step can do simple - smoothing --- this is often helpful for low-quality source data. - JPEG proper: - * MCU assembly, DCT, quantization. - * Entropy coding (sequential or progressive, Huffman or arithmetic). - -In addition to these modules we need overall control, marker generation, -and support code (memory management & error handling). There is also a -module responsible for physically writing the output data --- typically -this is just an interface to fwrite(), but some applications may need to -do something else with the data. - -The decompressor library contains the following main elements: - - JPEG proper: - * Entropy decoding (sequential or progressive, Huffman or arithmetic). - * Dequantization, inverse DCT, MCU disassembly. - Postprocessing: - * Upsampling. Optionally, this step may be able to do more general - rescaling of the image. - * Color space conversion (e.g., YCbCr to RGB). This step may also - provide gamma adjustment [ currently it does not ]. - * Optional color quantization (e.g., reduction to 256 colors). - * Optional color precision reduction (e.g., 24-bit to 15-bit color). - [This feature is not currently implemented.] - -We also need overall control, marker parsing, and a data source module. -The support code (memory management & error handling) can be shared with -the compression half of the library. - -There may be several implementations of each of these elements, particularly -in the decompressor, where a wide range of speed/quality tradeoffs is very -useful. It must be understood that some of the best speedups involve -merging adjacent steps in the pipeline. For example, upsampling, color space -conversion, and color quantization might all be done at once when using a -low-quality ordered-dither technique. The system architecture is designed to -allow such merging where appropriate. - - -Note: it is convenient to regard edge expansion (padding to block boundaries) -as a preprocessing/postprocessing function, even though the JPEG spec includes -it in compression/decompression. We do this because downsampling/upsampling -can be simplified a little if they work on padded data: it's not necessary to -have special cases at the right and bottom edges. Therefore the interface -buffer is always an integral number of blocks wide and high, and we expect -compression preprocessing to pad the source data properly. Padding will occur -only to the next block (8-sample) boundary. In an interleaved-scan situation, -additional dummy blocks may be used to fill out MCUs, but the MCU assembly and -disassembly logic will create or discard these blocks internally. (This is -advantageous for speed reasons, since we avoid DCTing the dummy blocks. -It also permits a small reduction in file size, because the compressor can -choose dummy block contents so as to minimize their size in compressed form. -Finally, it makes the interface buffer specification independent of whether -the file is actually interleaved or not.) Applications that wish to deal -directly with the downsampled data must provide similar buffering and padding -for odd-sized images. - - -*** Poor man's object-oriented programming *** - -It should be clear by now that we have a lot of quasi-independent processing -steps, many of which have several possible behaviors. To avoid cluttering the -code with lots of switch statements, we use a simple form of object-style -programming to separate out the different possibilities. - -For example, two different color quantization algorithms could be implemented -as two separate modules that present the same external interface; at runtime, -the calling code will access the proper module indirectly through an "object". - -We can get the limited features we need while staying within portable C. -The basic tool is a function pointer. An "object" is just a struct -containing one or more function pointer fields, each of which corresponds to -a method name in real object-oriented languages. During initialization we -fill in the function pointers with references to whichever module we have -determined we need to use in this run. Then invocation of the module is done -by indirecting through a function pointer; on most machines this is no more -expensive than a switch statement, which would be the only other way of -making the required run-time choice. The really significant benefit, of -course, is keeping the source code clean and well structured. - -We can also arrange to have private storage that varies between different -implementations of the same kind of object. We do this by making all the -module-specific object structs be separately allocated entities, which will -be accessed via pointers in the master compression or decompression struct. -The "public" fields or methods for a given kind of object are specified by -a commonly known struct. But a module's initialization code can allocate -a larger struct that contains the common struct as its first member, plus -additional private fields. With appropriate pointer casting, the module's -internal functions can access these private fields. (For a simple example, -see jdatadst.c, which implements the external interface specified by struct -jpeg_destination_mgr, but adds extra fields.) - -(Of course this would all be a lot easier if we were using C++, but we are -not yet prepared to assume that everyone has a C++ compiler.) - -An important benefit of this scheme is that it is easy to provide multiple -versions of any method, each tuned to a particular case. While a lot of -precalculation might be done to select an optimal implementation of a method, -the cost per invocation is constant. For example, the upsampling step might -have a "generic" method, plus one or more "hardwired" methods for the most -popular sampling factors; the hardwired methods would be faster because they'd -use straight-line code instead of for-loops. The cost to determine which -method to use is paid only once, at startup, and the selection criteria are -hidden from the callers of the method. - -This plan differs a little bit from usual object-oriented structures, in that -only one instance of each object class will exist during execution. The -reason for having the class structure is that on different runs we may create -different instances (choose to execute different modules). You can think of -the term "method" as denoting the common interface presented by a particular -set of interchangeable functions, and "object" as denoting a group of related -methods, or the total shared interface behavior of a group of modules. - - -*** Overall control structure *** - -We previously mentioned the need for overall control logic in the compression -and decompression libraries. In IJG implementations prior to v5, overall -control was mostly provided by "pipeline control" modules, which proved to be -large, unwieldy, and hard to understand. To improve the situation, the -control logic has been subdivided into multiple modules. The control modules -consist of: - -1. Master control for module selection and initialization. This has two -responsibilities: - - 1A. Startup initialization at the beginning of image processing. - The individual processing modules to be used in this run are selected - and given initialization calls. - - 1B. Per-pass control. This determines how many passes will be performed - and calls each active processing module to configure itself - appropriately at the beginning of each pass. End-of-pass processing, - where necessary, is also invoked from the master control module. - - Method selection is partially distributed, in that a particular processing - module may contain several possible implementations of a particular method, - which it will select among when given its initialization call. The master - control code need only be concerned with decisions that affect more than - one module. - -2. Data buffering control. A separate control module exists for each - inter-processing-step data buffer. This module is responsible for - invoking the processing steps that write or read that data buffer. - -Each buffer controller sees the world as follows: - -input data => processing step A => buffer => processing step B => output data - | | | - ------------------ controller ------------------ - -The controller knows the dataflow requirements of steps A and B: how much data -they want to accept in one chunk and how much they output in one chunk. Its -function is to manage its buffer and call A and B at the proper times. - -A data buffer control module may itself be viewed as a processing step by a -higher-level control module; thus the control modules form a binary tree with -elementary processing steps at the leaves of the tree. - -The control modules are objects. A considerable amount of flexibility can -be had by replacing implementations of a control module. For example: -* Merging of adjacent steps in the pipeline is done by replacing a control - module and its pair of processing-step modules with a single processing- - step module. (Hence the possible merges are determined by the tree of - control modules.) -* In some processing modes, a given interstep buffer need only be a "strip" - buffer large enough to accommodate the desired data chunk sizes. In other - modes, a full-image buffer is needed and several passes are required. - The control module determines which kind of buffer is used and manipulates - virtual array buffers as needed. One or both processing steps may be - unaware of the multi-pass behavior. - -In theory, we might be able to make all of the data buffer controllers -interchangeable and provide just one set of implementations for all. In -practice, each one contains considerable special-case processing for its -particular job. The buffer controller concept should be regarded as an -overall system structuring principle, not as a complete description of the -task performed by any one controller. - - -*** Compression object structure *** - -Here is a sketch of the logical structure of the JPEG compression library: - - |-- Colorspace conversion - |-- Preprocessing controller --| - | |-- Downsampling -Main controller --| - | |-- Forward DCT, quantize - |-- Coefficient controller --| - |-- Entropy encoding - -This sketch also describes the flow of control (subroutine calls) during -typical image data processing. Each of the components shown in the diagram is -an "object" which may have several different implementations available. One -or more source code files contain the actual implementation(s) of each object. - -The objects shown above are: - -* Main controller: buffer controller for the subsampled-data buffer, which - holds the preprocessed input data. This controller invokes preprocessing to - fill the subsampled-data buffer, and JPEG compression to empty it. There is - usually no need for a full-image buffer here; a strip buffer is adequate. - -* Preprocessing controller: buffer controller for the downsampling input data - buffer, which lies between colorspace conversion and downsampling. Note - that a unified conversion/downsampling module would probably replace this - controller entirely. - -* Colorspace conversion: converts application image data into the desired - JPEG color space; also changes the data from pixel-interleaved layout to - separate component planes. Processes one pixel row at a time. - -* Downsampling: performs reduction of chroma components as required. - Optionally may perform pixel-level smoothing as well. Processes a "row - group" at a time, where a row group is defined as Vmax pixel rows of each - component before downsampling, and Vk sample rows afterwards (remember Vk - differs across components). Some downsampling or smoothing algorithms may - require context rows above and below the current row group; the - preprocessing controller is responsible for supplying these rows via proper - buffering. The downsampler is responsible for edge expansion at the right - edge (i.e., extending each sample row to a multiple of 8 samples); but the - preprocessing controller is responsible for vertical edge expansion (i.e., - duplicating the bottom sample row as needed to make a multiple of 8 rows). - -* Coefficient controller: buffer controller for the DCT-coefficient data. - This controller handles MCU assembly, including insertion of dummy DCT - blocks when needed at the right or bottom edge. When performing - Huffman-code optimization or emitting a multiscan JPEG file, this - controller is responsible for buffering the full image. The equivalent of - one fully interleaved MCU row of subsampled data is processed per call, - even when the JPEG file is noninterleaved. - -* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients. - Works on one or more DCT blocks at a time. (Note: the coefficients are now - emitted in normal array order, which the entropy encoder is expected to - convert to zigzag order as necessary. Prior versions of the IJG code did - the conversion to zigzag order within the quantization step.) - -* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the - coded data to the data destination module. Works on one MCU per call. - For progressive JPEG, the same DCT blocks are fed to the entropy coder - during each pass, and the coder must emit the appropriate subset of - coefficients. - -In addition to the above objects, the compression library includes these -objects: - -* Master control: determines the number of passes required, controls overall - and per-pass initialization of the other modules. - -* Marker writing: generates JPEG markers (except for RSTn, which is emitted - by the entropy encoder when needed). - -* Data destination manager: writes the output JPEG datastream to its final - destination (e.g., a file). The destination manager supplied with the - library knows how to write to a stdio stream; for other behaviors, the - surrounding application may provide its own destination manager. - -* Memory manager: allocates and releases memory, controls virtual arrays - (with backing store management, where required). - -* Error handler: performs formatting and output of error and trace messages; - determines handling of nonfatal errors. The surrounding application may - override some or all of this object's methods to change error handling. - -* Progress monitor: supports output of "percent-done" progress reports. - This object represents an optional callback to the surrounding application: - if wanted, it must be supplied by the application. - -The error handler, destination manager, and progress monitor objects are -defined as separate objects in order to simplify application-specific -customization of the JPEG library. A surrounding application may override -individual methods or supply its own all-new implementation of one of these -objects. The object interfaces for these objects are therefore treated as -part of the application interface of the library, whereas the other objects -are internal to the library. - -The error handler and memory manager are shared by JPEG compression and -decompression; the progress monitor, if used, may be shared as well. - - -*** Decompression object structure *** - -Here is a sketch of the logical structure of the JPEG decompression library: - - |-- Entropy decoding - |-- Coefficient controller --| - | |-- Dequantize, Inverse DCT -Main controller --| - | |-- Upsampling - |-- Postprocessing controller --| |-- Colorspace conversion - |-- Color quantization - |-- Color precision reduction - -As before, this diagram also represents typical control flow. The objects -shown are: - -* Main controller: buffer controller for the subsampled-data buffer, which - holds the output of JPEG decompression proper. This controller's primary - task is to feed the postprocessing procedure. Some upsampling algorithms - may require context rows above and below the current row group; when this - is true, the main controller is responsible for managing its buffer so as - to make context rows available. In the current design, the main buffer is - always a strip buffer; a full-image buffer is never required. - -* Coefficient controller: buffer controller for the DCT-coefficient data. - This controller handles MCU disassembly, including deletion of any dummy - DCT blocks at the right or bottom edge. When reading a multiscan JPEG - file, this controller is responsible for buffering the full image. - (Buffering DCT coefficients, rather than samples, is necessary to support - progressive JPEG.) The equivalent of one fully interleaved MCU row of - subsampled data is processed per call, even when the source JPEG file is - noninterleaved. - -* Entropy decoding: Read coded data from the data source module and perform - Huffman or arithmetic entropy decoding. Works on one MCU per call. - For progressive JPEG decoding, the coefficient controller supplies the prior - coefficients of each MCU (initially all zeroes), which the entropy decoder - modifies in each scan. - -* Dequantization and inverse DCT: like it says. Note that the coefficients - buffered by the coefficient controller have NOT been dequantized; we - merge dequantization and inverse DCT into a single step for speed reasons. - When scaled-down output is asked for, simplified DCT algorithms may be used - that emit only 1x1, 2x2, or 4x4 samples per DCT block, not the full 8x8. - Works on one DCT block at a time. - -* Postprocessing controller: buffer controller for the color quantization - input buffer, when quantization is in use. (Without quantization, this - controller just calls the upsampler.) For two-pass quantization, this - controller is responsible for buffering the full-image data. - -* Upsampling: restores chroma components to full size. (May support more - general output rescaling, too. Note that if undersized DCT outputs have - been emitted by the DCT module, this module must adjust so that properly - sized outputs are created.) Works on one row group at a time. This module - also calls the color conversion module, so its top level is effectively a - buffer controller for the upsampling->color conversion buffer. However, in - all but the highest-quality operating modes, upsampling and color - conversion are likely to be merged into a single step. - -* Colorspace conversion: convert from JPEG color space to output color space, - and change data layout from separate component planes to pixel-interleaved. - Works on one pixel row at a time. - -* Color quantization: reduce the data to colormapped form, using either an - externally specified colormap or an internally generated one. This module - is not used for full-color output. Works on one pixel row at a time; may - require two passes to generate a color map. Note that the output will - always be a single component representing colormap indexes. In the current - design, the output values are JSAMPLEs, so an 8-bit compilation cannot - quantize to more than 256 colors. This is unlikely to be a problem in - practice. - -* Color reduction: this module handles color precision reduction, e.g., - generating 15-bit color (5 bits/primary) from JPEG's 24-bit output. - Not quite clear yet how this should be handled... should we merge it with - colorspace conversion??? - -Note that some high-speed operating modes might condense the entire -postprocessing sequence to a single module (upsample, color convert, and -quantize in one step). - -In addition to the above objects, the decompression library includes these -objects: - -* Master control: determines the number of passes required, controls overall - and per-pass initialization of the other modules. This is subdivided into - input and output control: jdinput.c controls only input-side processing, - while jdmaster.c handles overall initialization and output-side control. - -* Marker reading: decodes JPEG markers (except for RSTn). - -* Data source manager: supplies the input JPEG datastream. The source - manager supplied with the library knows how to read from a stdio stream; - for other behaviors, the surrounding application may provide its own source - manager. - -* Memory manager: same as for compression library. - -* Error handler: same as for compression library. - -* Progress monitor: same as for compression library. - -As with compression, the data source manager, error handler, and progress -monitor are candidates for replacement by a surrounding application. - - -*** Decompression input and output separation *** - -To support efficient incremental display of progressive JPEG files, the -decompressor is divided into two sections that can run independently: - -1. Data input includes marker parsing, entropy decoding, and input into the - coefficient controller's DCT coefficient buffer. Note that this - processing is relatively cheap and fast. - -2. Data output reads from the DCT coefficient buffer and performs the IDCT - and all postprocessing steps. - -For a progressive JPEG file, the data input processing is allowed to get -arbitrarily far ahead of the data output processing. (This occurs only -if the application calls jpeg_consume_input(); otherwise input and output -run in lockstep, since the input section is called only when the output -section needs more data.) In this way the application can avoid making -extra display passes when data is arriving faster than the display pass -can run. Furthermore, it is possible to abort an output pass without -losing anything, since the coefficient buffer is read-only as far as the -output section is concerned. See libjpeg.doc for more detail. - -A full-image coefficient array is only created if the JPEG file has multiple -scans (or if the application specifies buffered-image mode anyway). When -reading a single-scan file, the coefficient controller normally creates only -a one-MCU buffer, so input and output processing must run in lockstep in this -case. jpeg_consume_input() is effectively a no-op in this situation. - -The main impact of dividing the decompressor in this fashion is that we must -be very careful with shared variables in the cinfo data structure. Each -variable that can change during the course of decompression must be -classified as belonging to data input or data output, and each section must -look only at its own variables. For example, the data output section may not -depend on any of the variables that describe the current scan in the JPEG -file, because these may change as the data input section advances into a new -scan. - -The progress monitor is (somewhat arbitrarily) defined to treat input of the -file as one pass when buffered-image mode is not used, and to ignore data -input work completely when buffered-image mode is used. Note that the -library has no reliable way to predict the number of passes when dealing -with a progressive JPEG file, nor can it predict the number of output passes -in buffered-image mode. So the work estimate is inherently bogus anyway. - -No comparable division is currently made in the compression library, because -there isn't any real need for it. - - -*** Data formats *** - -Arrays of pixel sample values use the following data structure: - - typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE - typedef JSAMPLE *JSAMPROW; ptr to a row of samples - typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows - typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays - -The basic element type JSAMPLE will typically be one of unsigned char, -(signed) char, or short. Short will be used if samples wider than 8 bits are -to be supported (this is a compile-time option). Otherwise, unsigned char is -used if possible. If the compiler only supports signed chars, then it is -necessary to mask off the value when reading. Thus, all reads of JSAMPLE -values must be coded as "GETJSAMPLE(value)", where the macro will be defined -as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere. - -With these conventions, JSAMPLE values can be assumed to be >= 0. This helps -simplify correct rounding during downsampling, etc. The JPEG standard's -specification that sample values run from -128..127 is accommodated by -subtracting 128 just as the sample value is copied into the source array for -the DCT step (this will be an array of signed ints). Similarly, during -decompression the output of the IDCT step will be immediately shifted back to -0..255. (NB: different values are required when 12-bit samples are in use. -The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be -defined as 255 and 128 respectively in an 8-bit implementation, and as 4095 -and 2048 in a 12-bit implementation.) - -We use a pointer per row, rather than a two-dimensional JSAMPLE array. This -choice costs only a small amount of memory and has several benefits: -* Code using the data structure doesn't need to know the allocated width of - the rows. This simplifies edge expansion/compression, since we can work - in an array that's wider than the logical picture width. -* Indexing doesn't require multiplication; this is a performance win on many - machines. -* Arrays with more than 64K total elements can be supported even on machines - where malloc() cannot allocate chunks larger than 64K. -* The rows forming a component array may be allocated at different times - without extra copying. This trick allows some speedups in smoothing steps - that need access to the previous and next rows. - -Note that each color component is stored in a separate array; we don't use the -traditional layout in which the components of a pixel are stored together. -This simplifies coding of modules that work on each component independently, -because they don't need to know how many components there are. Furthermore, -we can read or write each component to a temporary file independently, which -is helpful when dealing with noninterleaved JPEG files. - -In general, a specific sample value is accessed by code such as - GETJSAMPLE(image[colorcomponent][row][col]) -where col is measured from the image left edge, but row is measured from the -first sample row currently in memory. Either of the first two indexings can -be precomputed by copying the relevant pointer. - - -Since most image-processing applications prefer to work on images in which -the components of a pixel are stored together, the data passed to or from the -surrounding application uses the traditional convention: a single pixel is -represented by N consecutive JSAMPLE values, and an image row is an array of -(# of color components)*(image width) JSAMPLEs. One or more rows of data can -be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is -converted to component-wise storage inside the JPEG library. (Applications -that want to skip JPEG preprocessing or postprocessing will have to contend -with component-wise storage.) - - -Arrays of DCT-coefficient values use the following data structure: - - typedef short JCOEF; a 16-bit signed integer - typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients - typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks - typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows - typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays - -The underlying type is at least a 16-bit signed integer; while "short" is big -enough on all machines of interest, on some machines it is preferable to use -"int" for speed reasons, despite the storage cost. Coefficients are grouped -into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than -"8" and "64"). - -The contents of a coefficient block may be in either "natural" or zigzagged -order, and may be true values or divided by the quantization coefficients, -depending on where the block is in the processing pipeline. In the current -library, coefficient blocks are kept in natural order everywhere; the entropy -codecs zigzag or dezigzag the data as it is written or read. The blocks -contain quantized coefficients everywhere outside the DCT/IDCT subsystems. -(This latter decision may need to be revisited to support variable -quantization a la JPEG Part 3.) - -Notice that the allocation unit is now a row of 8x8 blocks, corresponding to -eight rows of samples. Otherwise the structure is much the same as for -samples, and for the same reasons. - -On machines where malloc() can't handle a request bigger than 64Kb, this data -structure limits us to rows of less than 512 JBLOCKs, or a picture width of -4000+ pixels. This seems an acceptable restriction. - - -On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW) -must be declared as "far" pointers, but the upper levels can be "near" -(implying that the pointer lists are allocated in the DS segment). -We use a #define symbol FAR, which expands to the "far" keyword when -compiling on 80x86 machines and to nothing elsewhere. - - -*** Suspendable processing *** - -In some applications it is desirable to use the JPEG library as an -incremental, memory-to-memory filter. In this situation the data source or -destination may be a limited-size buffer, and we can't rely on being able to -empty or refill the buffer at arbitrary times. Instead the application would -like to have control return from the library at buffer overflow/underrun, and -then resume compression or decompression at a later time. - -This scenario is supported for simple cases. (For anything more complex, we -recommend that the application "bite the bullet" and develop real multitasking -capability.) The libjpeg.doc file goes into more detail about the usage and -limitations of this capability; here we address the implications for library -structure. - -The essence of the problem is that the entropy codec (coder or decoder) must -be prepared to stop at arbitrary times. In turn, the controllers that call -the entropy codec must be able to stop before having produced or consumed all -the data that they normally would handle in one call. That part is reasonably -straightforward: we make the controller call interfaces include "progress -counters" which indicate the number of data chunks successfully processed, and -we require callers to test the counter rather than just assume all of the data -was processed. - -Rather than trying to restart at an arbitrary point, the current Huffman -codecs are designed to restart at the beginning of the current MCU after a -suspension due to buffer overflow/underrun. At the start of each call, the -codec's internal state is loaded from permanent storage (in the JPEG object -structures) into local variables. On successful completion of the MCU, the -permanent state is updated. (This copying is not very expensive, and may even -lead to *improved* performance if the local variables can be registerized.) -If a suspension occurs, the codec simply returns without updating the state, -thus effectively reverting to the start of the MCU. Note that this implies -leaving some data unprocessed in the source/destination buffer (ie, the -compressed partial MCU). The data source/destination module interfaces are -specified so as to make this possible. This also implies that the data buffer -must be large enough to hold a worst-case compressed MCU; a couple thousand -bytes should be enough. - -In a successive-approximation AC refinement scan, the progressive Huffman -decoder has to be able to undo assignments of newly nonzero coefficients if it -suspends before the MCU is complete, since decoding requires distinguishing -previously-zero and previously-nonzero coefficients. This is a bit tedious -but probably won't have much effect on performance. Other variants of Huffman -decoding need not worry about this, since they will just store the same values -again if forced to repeat the MCU. - -This approach would probably not work for an arithmetic codec, since its -modifiable state is quite large and couldn't be copied cheaply. Instead it -would have to suspend and resume exactly at the point of the buffer end. - -The JPEG marker reader is designed to cope with suspension at an arbitrary -point. It does so by backing up to the start of the marker parameter segment, -so the data buffer must be big enough to hold the largest marker of interest. -Again, a couple KB should be adequate. (A special "skip" convention is used -to bypass COM and APPn markers, so these can be larger than the buffer size -without causing problems; otherwise a 64K buffer would be needed in the worst -case.) - -The JPEG marker writer currently does *not* cope with suspension. I feel that -this is not necessary; it is much easier simply to require the application to -ensure there is enough buffer space before starting. (An empty 2K buffer is -more than sufficient for the header markers; and ensuring there are a dozen or -two bytes available before calling jpeg_finish_compress() will suffice for the -trailer.) This would not work for writing multi-scan JPEG files, but -we simply do not intend to support that capability with suspension. - - -*** Memory manager services *** - -The JPEG library's memory manager controls allocation and deallocation of -memory, and it manages large "virtual" data arrays on machines where the -operating system does not provide virtual memory. Note that the same -memory manager serves both compression and decompression operations. - -In all cases, allocated objects are tied to a particular compression or -decompression master record, and they will be released when that master -record is destroyed. - -The memory manager does not provide explicit deallocation of objects. -Instead, objects are created in "pools" of free storage, and a whole pool -can be freed at once. This approach helps prevent storage-leak bugs, and -it speeds up operations whenever malloc/free are slow (as they often are). -The pools can be regarded as lifetime identifiers for objects. Two -pools/lifetimes are defined: - * JPOOL_PERMANENT lasts until master record is destroyed - * JPOOL_IMAGE lasts until done with image (JPEG datastream) -Permanent lifetime is used for parameters and tables that should be carried -across from one datastream to another; this includes all application-visible -parameters. Image lifetime is used for everything else. (A third lifetime, -JPOOL_PASS = one processing pass, was originally planned. However it was -dropped as not being worthwhile. The actual usage patterns are such that the -peak memory usage would be about the same anyway; and having per-pass storage -substantially complicates the virtual memory allocation rules --- see below.) - -The memory manager deals with three kinds of object: -1. "Small" objects. Typically these require no more than 10K-20K total. -2. "Large" objects. These may require tens to hundreds of K depending on - image size. Semantically they behave the same as small objects, but we - distinguish them for two reasons: - * On MS-DOS machines, large objects are referenced by FAR pointers, - small objects by NEAR pointers. - * Pool allocation heuristics may differ for large and small objects. - Note that individual "large" objects cannot exceed the size allowed by - type size_t, which may be 64K or less on some machines. -3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs - (typically large enough for the entire image being processed). The - memory manager provides stripwise access to these arrays. On machines - without virtual memory, the rest of the array may be swapped out to a - temporary file. - -(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large -objects for the data proper and small objects for the row pointers. For -convenience and speed, the memory manager provides single routines to create -these structures. Similarly, virtual arrays include a small control block -and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.) - -In the present implementation, virtual arrays are only permitted to have image -lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is -not very useful since a virtual array's raison d'etre is to store data for -multiple passes through the image.) We also expect that only "small" objects -will be given permanent lifespan, though this restriction is not required by -the memory manager. - -In a non-virtual-memory machine, some performance benefit can be gained by -making the in-memory buffers for virtual arrays be as large as possible. -(For small images, the buffers might fit entirely in memory, so blind -swapping would be very wasteful.) The memory manager will adjust the height -of the buffers to fit within a prespecified maximum memory usage. In order -to do this in a reasonably optimal fashion, the manager needs to allocate all -of the virtual arrays at once. Therefore, there isn't a one-step allocation -routine for virtual arrays; instead, there is a "request" routine that simply -allocates the control block, and a "realize" routine (called just once) that -determines space allocation and creates all of the actual buffers. The -realize routine must allow for space occupied by non-virtual large objects. -(We don't bother to factor in the space needed for small objects, on the -grounds that it isn't worth the trouble.) - -To support all this, we establish the following protocol for doing business -with the memory manager: - 1. Modules must request virtual arrays (which may have only image lifespan) - during the initial setup phase, i.e., in their jinit_xxx routines. - 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be - allocated during initial setup. - 3. realize_virt_arrays will be called at the completion of initial setup. - The above conventions ensure that sufficient information is available - for it to choose a good size for virtual array buffers. -Small objects of any lifespan may be allocated at any time. We expect that -the total space used for small objects will be small enough to be negligible -in the realize_virt_arrays computation. - -In a virtual-memory machine, we simply pretend that the available space is -infinite, thus causing realize_virt_arrays to decide that it can allocate all -the virtual arrays as full-size in-memory buffers. The overhead of the -virtual-array access protocol is very small when no swapping occurs. - -A virtual array can be specified to be "pre-zeroed"; when this flag is set, -never-yet-written sections of the array are set to zero before being made -available to the caller. If this flag is not set, never-written sections -of the array contain garbage. (This feature exists primarily because the -equivalent logic would otherwise be needed in jdcoefct.c for progressive -JPEG mode; we may as well make it available for possible other uses.) - -The first write pass on a virtual array is required to occur in top-to-bottom -order; read passes, as well as any write passes after the first one, may -access the array in any order. This restriction exists partly to simplify -the virtual array control logic, and partly because some file systems may not -support seeking beyond the current end-of-file in a temporary file. The main -implication of this restriction is that rearrangement of rows (such as -converting top-to-bottom data order to bottom-to-top) must be handled while -reading data out of the virtual array, not while putting it in. - - -*** Memory manager internal structure *** - -To isolate system dependencies as much as possible, we have broken the -memory manager into two parts. There is a reasonably system-independent -"front end" (jmemmgr.c) and a "back end" that contains only the code -likely to change across systems. All of the memory management methods -outlined above are implemented by the front end. The back end provides -the following routines for use by the front end (none of these routines -are known to the rest of the JPEG code): - -jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown - -jpeg_get_small, jpeg_free_small interface to malloc and free library routines - (or their equivalents) - -jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines; - else usually the same as - jpeg_get_small/jpeg_free_small - -jpeg_mem_available estimate available memory - -jpeg_open_backing_store create a backing-store object - -read_backing_store, manipulate a backing-store object -write_backing_store, -close_backing_store - -On some systems there will be more than one type of backing-store object -(specifically, in MS-DOS a backing store file might be an area of extended -memory as well as a disk file). jpeg_open_backing_store is responsible for -choosing how to implement a given object. The read/write/close routines -are method pointers in the structure that describes a given object; this -lets them be different for different object types. - -It may be necessary to ensure that backing store objects are explicitly -released upon abnormal program termination. For example, MS-DOS won't free -extended memory by itself. To support this, we will expect the main program -or surrounding application to arrange to call self_destruct (typically via -jpeg_destroy) upon abnormal termination. This may require a SIGINT signal -handler or equivalent. We don't want to have the back end module install its -own signal handler, because that would pre-empt the surrounding application's -ability to control signal handling. - -The IJG distribution includes several memory manager back end implementations. -Usually the same back end should be suitable for all applications on a given -system, but it is possible for an application to supply its own back end at -need. - - -*** Implications of DNL marker *** - -Some JPEG files may use a DNL marker to postpone definition of the image -height (this would be useful for a fax-like scanner's output, for instance). -In these files the SOF marker claims the image height is 0, and you only -find out the true image height at the end of the first scan. - -We could read these files as follows: -1. Upon seeing zero image height, replace it by 65535 (the maximum allowed). -2. When the DNL is found, update the image height in the global image - descriptor. -This implies that control modules must avoid making copies of the image -height, and must re-test for termination after each MCU row. This would -be easy enough to do. - -In cases where image-size data structures are allocated, this approach will -result in very inefficient use of virtual memory or much-larger-than-necessary -temporary files. This seems acceptable for something that probably won't be a -mainstream usage. People might have to forgo use of memory-hogging options -(such as two-pass color quantization or noninterleaved JPEG files) if they -want efficient conversion of such files. (One could improve efficiency by -demanding a user-supplied upper bound for the height, less than 65536; in most -cases it could be much less.) - -The standard also permits the SOF marker to overestimate the image height, -with a DNL to give the true, smaller height at the end of the first scan. -This would solve the space problems if the overestimate wasn't too great. -However, it implies that you don't even know whether DNL will be used. - -This leads to a couple of very serious objections: -1. Testing for a DNL marker must occur in the inner loop of the decompressor's - Huffman decoder; this implies a speed penalty whether the feature is used - or not. -2. There is no way to hide the last-minute change in image height from an - application using the decoder. Thus *every* application using the IJG - library would suffer a complexity penalty whether it cared about DNL or - not. -We currently do not support DNL because of these problems. - -A different approach is to insist that DNL-using files be preprocessed by a -separate program that reads ahead to the DNL, then goes back and fixes the SOF -marker. This is a much simpler solution and is probably far more efficient. -Even if one wants piped input, buffering the first scan of the JPEG file needs -a lot smaller temp file than is implied by the maximum-height method. For -this approach we'd simply treat DNL as a no-op in the decompressor (at most, -check that it matches the SOF image height). - -We will not worry about making the compressor capable of outputting DNL. -Something similar to the first scheme above could be applied if anyone ever -wants to make that work. diff --git a/libjpegtwrp/testimg.bmp b/libjpegtwrp/testimg.bmp deleted file mode 100644 index 8603d1548..000000000 Binary files a/libjpegtwrp/testimg.bmp and /dev/null differ diff --git a/libjpegtwrp/testimg.jpg b/libjpegtwrp/testimg.jpg deleted file mode 100644 index b34ca5d31..000000000 Binary files a/libjpegtwrp/testimg.jpg and /dev/null differ diff --git a/libjpegtwrp/testimg.ppm b/libjpegtwrp/testimg.ppm deleted file mode 100644 index 9d81ce24a..000000000 --- a/libjpegtwrp/testimg.ppm +++ /dev/null @@ -1,4 +0,0 @@ -P6 -227 149 -255 -0/-0/-10.21/51.51.62/62/83/83/:3-:3-:3-:3-:3-:3-:2/91.91.80-80-91.91.:2/80-80-80-80-80-80-80-80-6.+6.+6.+5-*5-*4,)4,)4,)4,)4,)4,)4,)4,)4,)4,)2-)/*$/,%/,%0-&1.'2/(30)30)63,63,74-85.85.96/:70:7.A:0B<0D>2F@4IA4JB5KC6KC6MD5MD5OC3NB2OC3OC3PD4RE5R?1Y?2b@4nB5}E6‹H8™G9£F7¯G:¸G9¾E:ÅG;ÇG>ÊG?ËH@ÐE@çFLíCLëDKëEIîCIïBDñ>Bô=Aø;A÷:@ô:?ð×?<ËA7»=/µ@.µ@.´?-´?-³@-²?-¯@-­@,ªA,¦A-¢B,Ÿ@*›A)˜@*–A,”>-’?/’?/‘>.‘>,=+’<+’<+”?+”?+”=*”=*”=*•>+–?,–@/–?6•>5—=2Ÿ?1©B3³D3¼D4¿D4¹?0µA2¬F8žH;‡H9oA2T8*C3&=5295495473271160050-50-72/72/72/61.61-50,50,41,//-.0-//-//-0/-0/-2.-2.-5,-4+,4*+3)*7(+=.1E69P:0U?1^A3jC4xD6„E4’E5œC3§C4¯A4µA4¼B7ÀD:ÄE<ÅF=ÍC@áEIçBIèCIêDHíDGïBDó@Cö?Cø;A÷:@ô:?ðÕ@<Ê@6¹>/µ@.´?-´?-´?-²?,°?-¯@-­@,©@+¦A-¡A+Ÿ@*›A)˜@*–A,”>-’?/‘>.‘>.‘>,=+’<+’<+”?+“>*”=*”=*”=*•>+–?,–@/”@5•>5˜>3 >1«A3µD4½C4¿D5»A2·C6¬F8œI;…G:l@3S9*B4)>63:6595484382271161.61.72/72/72/61.61-50,50,41,//-.0-//-//-0/-0/-2.-2.-3--5,-4*+3)*5)+<-0C47N8:d>=vEA†JINLšTV¤aj¥l}rŽ‘{¢†€®…¹{„»ou©[[QHuOCiOFeOG_PH_RN_[Yfnotƒ‡ˆ”™•™ž—š ”™‘ƒ~ojkY][LVSJXSZVRaXQa/.,/.,0/-10.40-40-51.51.72.72.72.72.92,92,92,92,91.80.7/-7/-7/-7/-80.91/80.80.80.80.80.80.80.80.6.,5-+5-+5-+4,*4,*4,*4,*5-+5-+5-+5-+5-+5-+5-+3.*2-'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:7.?8.@:.B<0D>2G?4H@5H@3H@3I@1I@1K?1K?1K?/L@0MA1NB2MA1QA1YB2dC2qC3|C2‡B2’A0˜<- :+§;.¯=2µ@6ºD:¿F=ÅD>ÙCEá@FãBGçBFêDFðCEôADø?Dú;@ù:?õ;@ð=@è@@ÜA=Ñ@;Æ@5·=.³@-³@-²?,²?-°?-¯>,­@,ª?-§@-¥@,¡A+A,š?*˜@*•@+”>-‘>.‘>.‘>.=+=+=+=+‘>,‘>,’<+’<+“=,“=,”?+•?.•A6–?5š>3£>2¯A4¹C5¿D5ÁC5ÀD8¸F;®I=™J=G;h@4Q:,B5,?74=77<66:4494183072/72/62/62/62/51.52-41,41,21,.0-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24I56[97l?9|E@†IDOM˜[`›fv”mˆŒwžƒ}­}‚¹u~·fm¤TV‰MEvLAkMAeOFcQHcMH^NK\[[eqty…‰ˆ‡Œ†Šˆ…†Š|xzlfiXZ[MVSLZU[ZT`[S`.-+/.,/.,0/-3/,40-40-40-61-61-61-61-81+81+81+81+7/-7/-6.,6.,6.,6.,7/-7/-80.80.80.80.80.80.80.80.5-+5-+5-+4,*4,*4,*3+)3+)6.,6.,6.,6.,6.,6.,6.,4/,30+30)30)41*41*52+52+52+52+52+63,74-85.85.96/96->7-?9-@:.B<0E=2E=2F>1F>1G=1G>/H<.I=/I=/J>.L@0JA0KD2NE4UD4^D3iD2sB1~A/†?-Œ9)”9'9*£<-¬@3³E8¸H<ÁF>ÒDCÚACÞBCâDCçCDìBCó@C÷?Aú;@ù:?õ;@î>@åA@ÚB=Í@9Â@3µ=-°@,°@,°@,¯>,®?,®?,¬?+©@-¦?,£@+ @*œ@+˜@*–@)”?*‘>,‘>.‘>.=-=+=+<*<*=+=+<*<*’<+‘>,”>-’?-•A6–?5œ>2¦@4²B6¼C8ÁC7ÂB7ÂF<ºJ?¬L@—K>|F:b@4L:.A7-@85>96=77<74:5294183083062/62/62/32.52-21,21,12--2.-2./1./1.00.00.10.10.5106005//5,-4+,6,-:01D22T71c;3qA7{E;‚HD‰RU_l‹i‚ƒs˜}y«x}µowµ`f¢QR‹LEyL@pL@hPEgQFfLC^GBVMLZ^^fjnquyxx}wz€vwzokoa`bTWYLTTL]WY]V]]V^------.-+/.,0/-10.3/,40-3/,3/,4/+4/+4/+4/+6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/85096196/<5-=6,?8.@9/B:/C;0C;0C;.D:.D:.F:.G;-H<.I=/J>0I@1JG6MH5RG5YF5bE3jD1uB/}>,‚;)‹:)“:*š=,£B2¬F8²J=»I?ÌGBÔDCØDBÝEBâBBéAAð=@ô<>ù:?ø:<ô<>í?>áB>ÓC:ÅA5¹?0²?-®?,®?,®?,­>-¬>-¬>-ª?-¨>.¤?- ?,ž?+š?,—?+•>*“>*‘>,?.>->->-Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,<,>-‘>.?.”B4—A4@1¨@3¶A7¿C9ÅB8ÄA7¾C;·H?¦LCJ@tE;Z>2E9-<5+@93@85?75>63=52<4194083/62/43/43/23.32.12-12-02--2.,2.-2.-2./1./1.00.10.3205105104..2,,4+,7./=/.N5.Y9.e=1n@3sB;yKK€Zeƒg€p—zxªu{·ks´_d¦TT”OGƒLBwNAmNBhMAeJA`GBYGFXKKWMPU]cc`fbbia`f\Z`TW[MUXMXXP^YV`WX`WZ,,,,,,.-+.-+/.,0/-3/,3/,2.+2.+3.*3.*3.*3.*5.(5-*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/85085085.;4,<5+=6,>7-@7.A9.A9.A9.C9/C9-E9-F:.G;/H<.J>0HA1JG6IH6NG5VF6\E3dC2n@0v>-{<+‚;)Œ;*”=,œ@1£F5ªJ:´J=ÄH@ÌEAÑFAÖE@ÞCAä@>ì>?ñ:<÷;<ô:;ð<=é@=ÜC=ÍC8¾@2±>,®?,«@,ª?+ª?+ª?-©>,©>,¨?,¥>-¢?, ?,›>,—?+•>*“>)‘?*>+>->->-Ž=,Ž=,Ž=,<+Ž=,‹<+<+‹<+‹<-Œ=,>/Ž?.”B4—A2 @2¬B5¹C9ÂC:ÅB:ÂA;ºA9±I@£NGNEoG=S?4A;/96-@93A75?74>63<4194083/74/43/43/34/23.23.02-02-.3--3/-3/.3/.3/02/02/11/11/21/32032040/2.-1-,4..8.,G4-O4)X8+`<0e?6mGFyYd‚k…€uŸ||²w|¼nu»dh¯[[¡RMLB~OArL@hI=cH>`HB^ECX@BO;@FBGJDMJJQJJQIIQFKQEOUIVWO^YS`YS`XU++++++,,,---/.,/.,0/-0/-1-*1-*1-*1-*2-)2-)2-)2-)2-*2,,1++1++1++1++2,,2,,1++1++1++1++1++1++1++1++2,,2,,2,,1++1++1++0**0**3--3--3--3--3--3--3--3.+41,41,41,30+30+30+30+30+41,41,52-63.74/74/85085.:3+;4,<5-=6.?6/?6-?6-?7,B8.B8.E8/E9-G;/H<0J>2H@3HE6GF4KE5QD4XC2_B2f?.n=,v=,|:*…9)Œ;*“=.›B2¢F7¬F8»F<ÂF>ÉF>ÐE>ÙD@âC?ê@@ð>>ò::ñ;:ì<<äA<ÖC;ÆD6µ@/ª=)ª?-©@-©@-¨?,¨>.¨>.§=-¥>-£=. ?.ž?-š?-–?,“>*‘?*>)>+>->-Œ=,Œ=.Œ=.‹<-‹<-‹<-Š=-Š;,‰<,Š.‹=0Œ?/’C2˜B1¡A1®B6¼C:ÂC<ÄC=ÀC=¹FA²QJ¥XRXQsRIWI>CC793@72>71=60:5/94.83/63.43.43.34/13.13..3-.3-.3--3/-3/-3/-3/.3/.3/02/02/00.11/22021/0/-/.,2.-4/,?0+D0)K3)T8-Z<4dFFu]jƒs‰€«…„¾~ƒÇtzÆmp½ce¯VSšLC‚K?qI_FB]DBW?AN;?H:BE>HGDMHGQIGQHJRGNVKUXM^ZOaYNaXO++++++,,,,,,.,-/.,0/-0/-1-*1-*1-*1-*2-)2-)2-)2-*2,,1++1++0**0**1++1++2,,0**0**0**0**0**0**0**0**2,,2,,2,,1++1++0**0**0**2,,2,,2,,2,,2,,2,,2,,2,,3/,30+30+30+30+30+30+30+41,41,52-63.63.74/85085092,:3+;4,<5->5.>5.>5.>5,B8/B8.E8/E8/G:1I=1J>2I?3FC4FC4JB5OA4TA2\@2b>0j<-q<.w9*}8)…8(Œ:,•=/›B4¤B5²F:ºE;ÁF>ÊG?ÔG@ÞFAçCAîB@í;;ë;;ç>;ßB;ÑD:¿D4¯@-¤>(¦A-¦A-¥@,¥@.¥@.¤?-¤?-¤>/¢>.Ÿ@.œ?.˜?-•>+‘?*>)>+>->->-Œ=,Œ=.‹<-‹<-Š=-Š=-ˆ<.ˆ<.ˆ<.ˆ/ˆ>1‹?1‘D2–C1¢B4­C6ºC;ÁD>ÁD>»EA¹PL²[T¥e\‘f]u_T[UIGMACI?<92?82>71;6094.74-63.43.43.34.24/13./4..3-.3-.3--3/-3/-3/-3/.3/.3/02/02///-00.22022010.0/-0/-3/,8,,;,)C0*K70S<6^IHtbn‡z”Š¶ŒÆ„ˆÏz€ÌrxÆik¶WWŸID„E=nG^CAY@CV@DP>EKGQRKWUQ^WU`XS_UR^TT^SY_S^[LaZJaZJ,-/,-/,-/,.-------.-+.-+/.,/.,1-*0,)0,)0,)/+(/+(/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/74/80-92,:3-;4.=4/>5.>5.>5.?4.?5,B5-C6.D7/F90G:1F<2G?4H@5J@6P?5T>3X<1^90b6+m9.t8-|8+ƒ9,;/“=0˜?1ž>0§A3­A4µC8¾E:ÊG=ÔG>ÞE?åC@è@?êBAæDAÚE>ÈD8·B1ªA.¢B,¢A.¡@-¢?,¢>.¡=-¡=-¢>. ?/œ<,š=,˜<-•>-“=,=+Ž=*Œ>*‹<+‹<+Š=-‰<,‰<,‰<,ˆ:-‡;-‰=/†3ˆ@2‰A5‹A4‘E5—D4£E9±I>ºG@»D>»EA¸MG´ZR¯f_£qf‘sh~rdjj^V^SIQFLLBJF=B>5<8/95,74+63,33+43.34.14-14-02-/1,,1+,1+-2.-2.-2.-2./1./1./1./1.02/02/11/11/11/11/11/40/4+0;/3A32C4/J;6]OOymy‹…Ÿ“»”–Ï•Ùƒ‰ÓtzÆjn·_b§Z[”LItHBdA>]>>X?BUAIVLU\U`bbqnn}xv†|rulyoguh_k_W_P]\Hb\Fc]G,-/,-/,-/,-/------.,-.-+/.,.-+0,)0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,+0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80.91.:2/;4.=4/>50>50=4-?4.?4.A4.B5-C6.E80G:2H;3H>5H>5L=6O>6Q=4V;2Z90_7/h70p7.w7-9-‰9.<1–<1›=1¢@3§A3¬B5´D8¾E:ÉF<ÔE=ÛD=ßD@àE@ÞFAÔG>ÄF8²C2¥B-žB-ŸC.žB-Ÿ@.ž?-ž?-ž?-ž>.ž>.š=,™>,–=-”=,=+>+Œ>*Œ=,‹<+Š=+‰<,‰<,‰<,‡;+‡;-…<-†2†@6‡A7ˆB6“G9—E7£G<¯J@¸IB¸GA·LF³TN±d\ªqfŸ~oo|mmseZfZNXMLNAKI=EC7@=4=:188.44,11)23-23-03,/2+/1,.0+.0+.0+/1.-2./1./1./1./1./1./1.02/02/11/11/11/11/11/2015+49-7<23?53H?:^VTxr|Šˆž““¹”—Ê–Ô„‹ÏyÂqy¸kt­hnž\_€XZqSUjRWjT^hZgmfvvr‚tˆ~’‡ƒ•‰~Žv†yr€qfteZeT[ZE`Z@b\D,-/,-/,-/,-/,-/,.-------.-+.-+.-+-,*/+(.*'.*'.*',+),*+,*+,*++)*+)*+)*+)*-+,-+,-+,-+,-+,-+,-+,-+,,*+,*+-+,-+,-+,.,-.,-.,-.,-.,-.,-/-./-./-./-./.,0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51.80.91.:2/;30=31=4/=4/=4/?40?4.A4.A4.C60D71F93G:4H;5J;6K<7N=6P;6S:5V72[6.c60k6.t5,}7/‡9/;0”<0–<1?3 @4¢@3¨@3±C6ºD8ÅE:ÍD:ÕF@×H@ÔIBÌI?¾E:®C3¡B.œA.B/œA.œ?.›>-›>-›>-›>/›?0˜<-–=-”<.“=.>-Œ=,‹<+Š=+‰<*‰<*‰<,‡;+‡;-…<-„:-ƒ;-„<0‚<0‚<2‚>3ƒ?4…A8‡C:ˆD9”J=—H; H>¬KD²KF³LG²SM®`V­sg¦qŒz‘Ž{‚‰ws€ocqbXcUNRDMN@HI;DD8@@49;.46+/1&01)01)/0*/0*./*./*//-//-//-.0-//-//-//-//-//-//-00.00.00.00.00.00.00.1/26+97+98/4;63HE>_^Yzz|‹š”±’—¿•Ç„ŽÃ}‰»{‰¶|‹²}Œ«}ˆšwƒq~‡n}‚n~~o‚~yŽ…ƒ™‹¡”‘¨˜¥”ˆŠƒ–ƒ|{j{i\hTXX@]Y<_[@-.0-.0-.0-.0-.0-.0.......-+.-+-,*-,*.*'.*'.*'.*),*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<41=31=31=31=4/>3/>3/@2/@3-A4.C60D71E82F93H94I:5J;6L:6N94Q83T50^72e60o6/x8/‚90Š:/<1”>1™?4›?4›?2Ÿ?1¥A2®B5¸D7¿E:ÇG>ËH@ÊJAÃI>¶F:ªB5žA0™@.™A-™A-˜?-—>,—>,™>,™=.—>.•<,”=,“=.=-Ž=,Š=+Š=-‰<,ˆ;)ˆ;)‡;+‡;+„;,„;,ƒ;-€;,;/€<1€<1>5ƒ@7ƒC:‡D<ˆE<”L@–H<žG>§JC®LI®QL­]Vªj^§€o¡yšš‚›ƒ†•€z‹xm{jbm]SZJQUFKO@EI:@D6;=057,13(01)/0(./).-(.-).-)/.,0/-/.,/.,/.,/.,/.,..,/.,..,0/-//-0/-//-//-//-//-2-17,:6*83-1961HJ?bfX{€z‹““£–°Œ•¶ƒ²¯…™²¤¶’¨³“¨«¤£Œ ž‡ž˜‚™}˜‰œ‹ˆ£”°š˜±›”­—‹£…›„’|k|iXfOSV;ZV9^Z=+/2+/2+/2+/2-.0-.0......------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/901:20;31<42=32=31<20<20=20=2.?1.?1.@2/A30B5/C60D63C84D95E:6G96H94K84N50X72_60i70r7/}:1†<1Œ>2>2—@6—?5—?5—?3œ@3£C5«C6³E8ºE;½G=¾H>¹G=°D8¦A5›?0—@/—@-—@-–?.•>-”=,•<,–=/–=/•<.“;-’0->0-?1.@2/A4.?4.@51@72@93A:4B94C84F74H5/Q51X5/a6/l8-u9.€0‹=1“?5•>5“?5“?4•B4šB4 C4¥D4¬B5°D8´E:±E;ªB7¡?4š>1–>0•?.”?+“=,“=,“<+“<+”<.”<.“;-’<-<.;-Š;,‰<,‡;+‡;+†:*†:*…9)ƒ:)ƒ:+9*9-9-€<1<3?6€A8‚C<…F?ˆIBŠICŽJAG>—HCŸNJ§VR§`Z©pe¤ƒrœ”}–¡ƒ¨Šˆ§ˆƒ „~–~yˆup{jdp\]iSR^JJS@BK:>E5:@29<134,22*1.)/,'/))0**1++2,,1++1++1++1++1++0,+0,+0,+1-,1-,1-,1-,/.,/.,/.,2,.8*75(13+(56&EK1\gGu‚d†“yŽ›Š‘ž”Ÿš‹ž˜¥——´ž¢Å¥©Î­¥É­¦Ê°§Ë±¤È¬—¾Ÿ‹³‘ˆ°²Ž²Ž²¬Š„¡‚€™{wŽrdx]Q_ENR7QQ5SR6,03,03,03,03./1./1./1./1/////////////.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/>0/=/.>0->0-?1.>3/=60;60;83<94=:5>93@72C60G4.O4+Y4+d5+n8,x:-;.…;.<4‘<5>3@3A2“B1—A2™@0 >1¦@4ªB7ªB9¥@6Ÿ>5—=2•?2’?-’?-‘>,=+‘;*‘;*’<-’<-‘;.‘;.Ž;-;-Š;.ˆ:-†:,„;,…9)…9)ƒ:)‚9(‚9*9*~8,~8,€<1€=4€@7B9„E>…IAˆKFŒMFŒIAŽH@˜JF¡SO¨]X©hb©{n¤Žy™œ’§†‰¬‹‚ªˆ€¡„™€~‹wxnjxadr[ZhQQ]IITCCL;>D60-?1.=2.=4-=6.;819919:29:2;81?6/C2+J1,T2)^3*g7+o9-u=.z2¢B6¡C7žB7™?4–>2”>1”>/“=.=-<,Ž=,Œ=,Œ=.>/Ž<.Ž<.‹2>5€@6‚C:ƒG=…JB‡NE‹OGŒICŽID“PJ˜\Tžg`uiž‡už˜€”¡…ª‰‰¬‹ƒ¨‡€¡„~›zytˆoi}bby]\pUUgOO\HGRAAH8=A388.85.7/,3+)2()2()3)*4*+0*,/+*0*,0**0*,0*,2),2),3*-1+-1+-1+-0,-0,-0,-1+/4)/4*+4-%46!?F%T`8m|Qg‰™tžz¡~ˆ¡zŠ§{‘¶‚›ÄˆŸËŸÉ™žÇÆš˜Á•Œ·Š‚­€…®‚Œµ‰„«‰®…‰©‚~œxvolƒfZnSJZ?GM3FJ1DF./0+.0+/0+01,01,01,12-21-32.43/43/62/51.41,3/,4/,50-50-4/,3.+2,,1-,0,+0,+.,-.,---/--/,,.++-*).))+.)/.)-/(/.)-/)-.)-.*+.*+/+*/+*-,*.-)--+-.)./*./*------.,-/-./.,0/-2.+2.+2-*4,)5-*6.+8/*:1,:1*;2+=4-=4->50>50>50=4/<3.;2-=2.<1-<1/;0.=/.>0/>0/@1.A0)@2);4*77-39-28.56.:3-?-)F*'L)'S*&Z/(`5,d<0k@0yA0@/†A1‹B3@3“=0“;/’8-“;/“=.”A1•B2”C2’A0‘>.‘;,—;0—:2’;1Œ=0ˆ?0„?/‚?.ƒ>.ˆ@1ˆ?0Š>1Š<0‰;/ˆ:.†:-ƒ;-{9+~@3w<.q7)w>-w>-v;-}?2{;/‚@4‡E9‰I?ˆLA†MB„PC‡NE‘KI—SP”bY‘paŒ}j‰‰q‰–|Šž‚¤‡¦‰Ž§Š§Œ‡¤ˆ~Ÿ‚uš{o—uiib„_[zXZsUZnSWeNPWEJK=C?6@93;0.6**3')3'+3'+1&*,*-)+***,*(),'+.(,1(-2'-3(.3(.3(02(00)10)1/*1/*0/)-1++0-(//#5,>5,>5.>5.>5.=4-<3.<3.=2.<1-;0.;0.=/.=/.>0/@1.C0*C0)A2+>4+:6-95,:3-<1-?-+D*)I*(N+'T/)Z5-_:1e>/pA/xA-€A0ˆ@2?4‘=3“:2“;19.‹.Œ@0A1A1ŽA/‘?1•;2•;2<2‹=0†>0ƒ@/?/‚?.…@1†>/‰=0ˆ<.‡;.„;,‚:,€;,x8,x<1s9-n9+s>.s>.r8*u:,}=1ƒA5‰E:‹I=‰K@†NA„PC‡NE‘JH—SR’f]Œwf„†p€“wž„¥†ˆ§ˆ§Š§§Š¤‰Ÿƒwœ}o˜ve’i`‹`Y‚ZY{X\wXZnSSaJNUCFH;C@7<737/-3*+2)*1(+.(*,*+**,+),+),-(,/)-2(02(02(02(02(10)1/*1-*3-*3-*12-12.-0,)--%8:,SXBox]€‹i‡–o†™l†žnˆ£p†¤p„¥pŠ­w“¶€™¹‡–¶„“³Œ®{†«x‚¨w‚¨yƒ¨|ƒ¦|‚¤{x’uqˆnh{eYjWMZHEL<@D5;=/12,12,12,12,23-23-43.43.54/54/85085085074/72.61-80-80-7/,6.+4/,3.+2,,1-,1-./-.0.1/-0--/,,.+*/+)./(/1'//)-/)-/)-/)-.*+.*+0,+0,+/.*/.*/.)0/*0/*0/+//-///0./0./0/-/.,1-*2-*6.+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@7.?6/>5.=4-=4-=2.<1-;0.;0.;0.;0.<1/?1.C2+E0+H/+K--L,/K+.I*/E+.A-,@.*A.(E.(M.)X1*b3-g5,j:,o;-w;0=4‡<6Œ<5:4:4Š<2‡=2†>2…?3†A2‰A3ŒB5C5Ž?2=/Œ>1Š>.‡>/…>,†=.ˆ<,‰;.‰<,ˆ:-†:*ƒ;,<)~=+{<+}=1z<1v:/u;/x@1x@1v<.v;-?5‚B8‰F=‹H?‰JA‡KA‡NCŠNF‘JH˜TQ–f\ve‡…n‚‘t{¤ƒ…¨‡ˆª‰ªŒ©ŒŽ¥‰ˆŸƒš}y˜xi–ma’e\‹a\†`]‚`[|]UrVPhPFYEBP?:D93:2.3,*/)*,)**(0'(1&*1&*1&*0'*1(+0*.0+//*.-+.,+0+,0)-0(-1(-1)-01/23/..*'**"57*PUAmv[|Ši€k~“j™jƒŸn€ n~ m€¥q‡¬x¯|‹­zˆªx„©v§v§u¦w¦y¤y€¢}}›yw‘tp‡mh|cYkUMZHDH9=?299-23-23-34.34.34.45/54/54/650761961:72:72961940940:2/91.91.80-50-4/,4..4..3/03/01/01/20.1..0--/-+.0)02).0*.0*.0*.0*,/+,/+*1-,1-,0/+0/+10+10+10+10,11/1111/010.10.2.+3.+3.*92,92,;2+<3,>4+@6-@6-A7.B8/A8/B90A8/A81@70>5.>5.=2.=2.<1/;0.;0.<1/=20=2.B3.E2.L..R+0V'/U&.P'/I).C/.<1+;2)?2)G0(R/)_.*d/)i9/k;/u<3}<6…;8‰;9Š;7ˆ:6‰>8†@8†B9…B9…C7†B7‡A7‰A5ˆ@1ˆA/‡@.‡@.‡>-ˆ<,ˆ;+‰:+Š8*ˆ9*‡:*ƒ:)<){=(x>(x>*‚>1{7.z7.z<1v;-w=/|A3{@2€B7ƒE:†H=ˆJ?†J@‡MBˆODŠQHŒSJŽ\QŽh[‹tb…g€‹m~–vž|ƒ§ƒ„©‡‡ª‰‹ªŠ‹¦‡‡ ‚ƒš~}˜yq•oi”ifgfŒeg‹gd†e_~_Zw[PhPK^JBP?8D62:/.4*,/(+*%2&&5%(4%(2&(1'(/)+/+,.,-+++*+-*+-(,-(,/',/',/*+-.*+1++0+'.+"88,PUAiqYv„c{Œhyh|–iœl}Ÿmyžkz m¥r‚§t€¥q}£p}£p}¥s~¥v~¥x}¤x|¡x}Ÿzz™wuqn‡je|bWkRN[GDF9?=1:8,45/45/45/560560560761761872872;83<94<94<94<73<73<41<41;30;3083072/61.61.5106216213122011/00./1-.2,04+.4+.4+.2,.2,,2,,2,,3/.3/,3/,3/,21,21,32-32.32032032032051051.61.61-;4.<5/=4-?6-A7.B8/E8/C9/D:1D:1E;2D:1C90B8/@5/@5/>3/>3/=2.=2.=20=20>31>31@51E31M02T,4X)3W(2R)1K,1B30:6-77+:6*B4)M2)X/)^/)f:1j;3s<7z=:‚<:†<;‡;;†::‚;7>8A8B9ƒC:ƒC:…@9„@7‚C2‚C1ƒB0„?/†=.ˆ<.‰:-‹9-‰7+‡8+…9+‚:+~=+x>*v?*x>*9-|/'‚8/„>4w4+s5*}A6}C7E:€G<‚I>ƒJ?„KB†MD‡QG…WJ|aNzjQ€pYu]‚|bƒ†i†“uˆ|ƒ£~§‚‚ª…‚¬†©„¥€{ž}z™wz’pzlxlwŒkumr‰lm„gkd`rX[iRR[HHL=@@4;7,70&5*$6('5''3''1'&.)&+*(++)+-*',('+*)+*)+***,+),+),-)*,#$2*'50*86*BC5UZFfpWn}^tˆeqŠbuex˜iw›ks™htšiwŸkz¢nx lwŸmx ny£s{¥u{¥w|£wyžuzœww–tsŽom†hd{_WkPN[GCC7>:195,560560671671782782872872983:94=:5>;6>;6>;6>95>95?74?74>63=52;63:5294194184184395484373243151240/6-06-.6-06-.4..4..4..4/,40-40-40-51.32-32-43.43.43/431542540841850940:5/=60>7/@7.A8/C90D:0G:1H;2F<3F<3F<3F<3E;2C90B71A60@51@51?40>3/>31?42@53?53@72C52I35P16T/6S.5P05J22C52=90<:-=:+C7)I6(Q3)W2)]2+d3,l50v64}77‚87ƒ77‚66~75}:4}<6}>5€?9ƒ@8†?9…A8€B3€C1B1ƒ@0…=/‡;.ˆ:.‡9-…9,ƒ9,‚:,<,|=,y>,x?,|=,‡5*‹2,¡LE§XQ‹A8|90‚F;€K=yH:zJ<{M>|N?}OBQE‡UJ‚_LrkOosR|uX‡w]yb˜iŸ‹s ”z––z|‹£ˆ¨…§‚€¤~{Ÿy~™vƒ‘p…ŽoƒŽp€pp{ŽpwŒms‡kj~bfv\_hSV[GOM>GA3@6*=0';,'9+(6+'3+(/,',-'+.').().(+-(-,*/+*3)*4(*7'*7'(3($<3,E>4IG8QR@]bKgqVjyZn‚]k„\l‰]p‘bq•eo•do—eršfuŸmrœjq›itžnx¢rz¤vy¢vyŸvvštw™vu”rokj…fc|^UlON\ECC7@91;4,671782782782893893983:94:94;:5>;6?<7?<7?<7@;7@;7B:7B:7A96@85=84=84<73<73<73<74<74<74;639529338308/09/.8/080.80.80.61.61-61-61-52-52-63.63.74/74/540540841952:63<94=84@93@70A8/C90D:0G:1H<0I=1I=1J=4J=4J=4I<3F<3D:1B8/A7.A81@70@72?61?61@72@72A83?74@85B86D97G96H96H96H94E80E8/E9-E9+G9,I9*K9+Q7*Z/&d/'n3-z63ƒ98‰;9‹;:‹=;‹A>‡@:‚=6<3:3‚<4ˆ=7‰@7ƒA5B3‚@2ƒ?2ƒ=1„<0;/€/|>/}>/=/†9/1+¢<8ÍlfÙ~y­ZTŒC<ˆLAN@tJ(+C&+E$+C&(F5-LC4VQ>[YD`bJgmQiwVj{Wl‚[g‚Wf†WlŽ\o”an”an–bršfsko›jo™irœnw ty¢xxžwu›vs—su—vs’rn‹li„cb{[TmMM]CGH:E<5@707827828938938939:4:94:94;:5<;6?<7@=8@=8@=8A<8A<8C;8C;8C;8B:7?:6>95>95=84>95>95>95>95=85<73:51;30:0.:0.91.91.91/91.91.72.61-61-63.63.63.74/74/74/540651952;83<94?:4B;5B;3A8/B:/C9/E;/H<0I=1J>2J>2K>5K>5J=4J=4F<3E;2C90B8/B92B92A83@72@72A83B94A:4?82@93B;5D=7F=6G<6K<5N;4M6.N6,Q6+Q6+Q7*P9+P9)V6'f6*r6,~;3‰@9•D@›HDŸJGŸLF QJ™LDŽD;…;0„7-…7-Œ91=4ˆ>5‡>7†=6…<5…<5=4}=3z>3x@3vA3x@3z>3<3ƒ:3ˆ73‘31˜(&³=;ì|zý•’Åhc–G@‰K@xH:nMhV>lX@t[E`L€hPysQ„wUžt\´l^É__ÓV\ÙQ[×T\äouÙzx̆|À~µ•€«•}£’xŸvœŠrœŠt™u•u‘‘u‹’s†‘s‚‘r|‹ny†ju{amoWgbN_TBUE5R/(9/&7.'6/'81):/)=.+A,+F)+H(+K'+H)'TB4YQ9B?:D?;D?;E@8E>8D=7B;5B;5B;5B;5B:7B;5A:4A:4A83A83A83@72@64>71>71>71<71<71;60:5/85.85.74/74/961961961:70<71=82A:2B;1C:1D<1F<2J>2K?3L@2N@3N@5N@7N@7L?6K>5I<3H;2E;2E;2B90A8/@91?80?80?80@93@93<5/MD=M@:K:3T@9R62O0+a<6\3-`5.`4+^/'^/%f6,m=1q=0‰I=G;—I?ŸKAŸF>›>7š=6žD;¦ND¤PE¨VJ«YK¥OB™A5—;0›>6“98‘98Œ65†52†84„?8|@6r>1rB4oA2q=0v:0‚72Œ43’-1š',ÈHIèbaÅEDÍWUáyv«VO†F<„VFmR=i[AibFjeHj`En^D|dLjT’bL²m]ÑnhÛX]à;Lç-Eò+Hõ0Lö@YìI\ä[eånrâ{|Û€}Ûƒ؉‚Ãv½wº„x¶†x²ˆx­Šw¨‹y¥Œxš€o™~m˜xi“oabY„UM{IBxA>u:9:49:49:49:4:;5;<6>=8?>9>=8>=8A>9A>9B?:C@;D?;D?;FA=E@8E>8E>8E>8E>8D=5C<6C<4D;4C:1B92B92B92B92A83A83@93@93>71<71;60;6096/85.74/74/96196/96/:70<71>:1A:0B<0C;0E;/I=1J>0L@2L@2N@3N@3N@5N@7M?6J=4I<3H;2E;2E;2C:1B90@91@91@91@91A:4B92D93I81L/+V.,j76u99{;;…ECƒD?„H@…IA†G>ŽIB™NH¡PL¢OG“D7”B4šB6ŸC8 >3œ7-œ7-Ÿ=0£C5›?0™@0 E3¤G6§F6®H:¶NE´LM¯HL¥@D™9;‘98>:ƒ@8x>3o>0zI;…LA„?8„,+’).³9DÒLWÜKNßMMÊ>=À@?Ð`\³YQ„@5‚TDyaIe[@^]?ihIslOvgJ~dK–cN¼dXÖ_[æUZëANò,Eþ%Dÿ&Hÿ'Iÿ.Nù3Nò6UE8[O5cZ9gaAifEnrOz‚]z‰bt†^r‰_p‰_p‹`qŽ`u’dw”dw”dw”fs’ix–rz—xy–x~˜}ƒ„…‡ƒ›…™ƒz’zr‰om„hhd`y[TmMNaERSAVPBUOC8938938939:4;<6<=7?>9@?:@?:@?:C@;C@;C@;C@;D?;D?;FA;FA;FA;E@:E@:E@:G@8F?7JA:I@9H?8G>5F=6E<3F<3E;1D:1D:1D:1D:1D;4D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/:5/;7.>7/@9/B90C;0E;1F<0I=1K?1M?2M@0NA1M@0P?5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:0?;2@<3@<3D;4UD—I?–LAœNB¬RJ¾URÌOSÄLK¥@4B0 @0¥?1¥;.£7+¤8+§=/«E6¡>+˜7$:'¥>-¬A/²C2¶D:§02¯:B¹DL½LRºMR­KL–A>‚71{8/v6,x2*„1-œ37¹=GÕGWèM[âFIÏ53Ð:9½31ÈNKÆc]”J?Œ[J}cLj_CgdEtoOpQhJhN°hYäbbõQZôDQö7Iý1Jÿ2Nÿ/Mÿ*Hÿ2Oü0K÷1Jõ5Lò4Mð2Kó3Ló7Pò@XïC[îF]íIaëNcêQeèUhèVkåSjäRiãOiäNiçNlëPoòSsóVuþh…ña|å[tÕUlÍYlÉdr¨R]r-2^&'Y0,W:4Q?5B:-:8)>B1LN9VO3aV6e_?heDquT†e~ŒiwˆdxŒiu‹er‹dr‹cvŒeyhzizj€•v„›~Šž… Š’£—¨–˜©™–¦™‘¢’‡˜†zypƒmg~b^wYTmMPcGSXDXUDYVG7827828939:4;<6=>8@?:A@;BA5G=3F<2E;1D:0D:0E;1E;2D;2E<3E<5E<5@91?80=82<71;60:5/:5/:5/96/96-;7.;7,?8.@:.C;0D0K?/M@0M@0M@/M@0O?2O>4L>3K=2J<3G:1E;1D:0D;2D;2B;1@<1@<3A=4B>5F<3S81[*&‰:?¾T`ÙTeæUfãUcËJOŸ30–:/‘>0™A3®F=ÅIGÕBHÍ>@±B7§F5©B3¬@3¯?3°>3³B4´D6²G5©B/£<)¤;(©<(«:(®6&­3(¶97º9=½7>¼7<¿^õ@aøCfö@fõ?eõ?gø?hüCmÿErÿIsÿOuÿQuþUvòSqçTnåaxÖfv·Wb}15j0/X1*P8,G>/>A.;D/?G/PK._T8g`CokN||`ˆŽr‡‘v}‹qzq|s|szozŠm}Œoƒ’uˆ—z•£Šœ©•£®¦±¡¬´§±¹®°·°«µ­¡«¢” ”ƒ‘‚s„qh|c]tXSlNPdHRZCWYDYZH671671782893:;5<=7?>9@?:BA/K?1M@0M@0NA0O?/O?0O?2N=3N=3J<1I;0G;/D:0D:0D<1D<1B;1@<1A=2A?3B?6K=4\5.w32­LSÛ]iæM_å@Q×6E·&+¨1)7(’:&—<)¬@3ÃD=Ô>?Í;;±?5¨B4ª@2­?2²@5¸C9¼H;»J<¬>/ª?/¨=+¦;)ª9)°:,·;/¼<1ÊFAÎDAÐ>?Ð79Ö7<ÞBEâLNÝROÄC>ÆKCÍTLÔSMÙKJÛ?Bà5>á27Û4.Ú7.Ð1+Ï:4¿84³@9µ[P–UC{N9‚bI†kP„`F’[F­fTËrdçmhêEKò:Dê9Cç=8@?:@?:C@;DAGB>GD=GD=HC=ID>IE2I=1G=1G=1F<0F<0E;1E;1D;2C:1A:0A:0@91@91=82<71;60;60;7.;7.;7,<8-?9-A;/D0L?/M@0NA0NA0O?/O?/O?2N=3M<2L;1I;0G;/F90C9/C;0B<0B;1@<1@>2A?3B?6N;4m84—FEÄY_ÛWbßCQÞ8FÔ3;½++­1'¡8%˜:!—9 ¤;&¶>.Ã:2¾71§7,¢:-¥9-§7,¯:1¸B8ºE;·E:®>2­?0§<,¤6'ª6)¶>0ÃD;ÊG=¾8-Î@6áD?ìBBô=Aó9>ë27Þ.0Û75âGBèSLåNGÜ=9Ù10ã/2ê67Ù1(ÞÒA>ÒGBÝOMëWWíNRïDMð:Gö5F÷2Fø.Dû1Gþ7Nþ8Sý8Tý8Vþ9Wÿ;\ÿ>aÿAeÿCkþ;eýjý?mú>nø>oô=mö:jÿHrÿ;aÿ?dÿKnÿKn÷NmïUoãZnèr‚Âaj˜ILt:8\6-P9+PC2UM:^QAreUˆ|n•‚Ÿ‘¦§Ÿ¡¦Ÿ–œ˜•ž›ž§¤¦¯¬¦¬¨¢§£¦¨£µ´°ÂÁ¼ÌÉÀÑÎÅÕÐÌÕÐÍÔÎÎÕÏÑÑËÏËÆÊ¿½À°²¯˜Ÿ˜€Œ~m~k`t[WnRVjNS`FV`EX`H560560560560671893:94;:5=<7>=8A>9C@;DAHC?HC?GD=HE>ID>ID>JF=JF=MF2@@4P91r1/¨JKÁSV»>D½06Â03Á//º1)©1!£9#œ=!™;›< ¡=#¥;%¤6%ž6) 8-¢6,¥4,­81·@:¸C<²@6±B7­A4¨-Ï>-Ù5+á*&í"%ú%+ÿ*1ÿ.4í)*ç.+á3,ß4,à3,ã2,é0-ç2+Ú2%Ö6&Ð2&Ï7,Å6.½>7È`UÒq¦eSVBŠM:£WIÈf[ßd_çRTèCIõFMí@Dß??Ô@<É@8Æ@7ÑFAãMLïJNô@Kù9Hý7Hü5Hø3E÷6Gú;Mú8Pü7Rû6Rý6Uÿ6Xÿ9]ÿ;aÿkÿ?mÿ@qÿBtÿBuþBuüBtùBpÿFmúAaþEeÿKjþKkÿVtÿ_zõ]tòj~æp~Óow®^aƒCAg6/hB7sUJye\Œ}v£–­£¡²®«¶¶¶²¶¹ª¯³°·½¶½Å½ÁÊÀÃÊÃÂÊÉÆÍÕÎÖÝ×ÛâÚØçÝÛéÝÝæÚÜåØßä×ààÔÞÙÏØÊÅ˺ºº¢§£ˆ’‡t‚qexb\sW[oS[jM\iK]gL561561561560561671872983<;6=<7@=8B?:DAHE>HE>HE2G=1E=2D;2C:1C:3A:2A:4@93?74<73<71>7/>7/<8/=90>:1A:2C<2D=3H@5I?3L@2MA1NA0P@0O@-O@-L?/L>1M=0L;1J91I81E80C90@9/>:/;;/<<0=>0>?1A?0S8-‡<7Ä\[ÊZY®86«.*²1+®.%­2#¬9&¬B*ªF,¦D'£A&£A&¢<#Ÿ9# 9*£;0¦:0¦7.­<4¶C<·E;°@5«=0¨Dá;=Ö<<Í@9Á>4¶8,¹6.Ä94âHHé@Eð;Dö:Hú:Iø8G÷;Iû?NþAUÿ?Vþiÿ>lÿ>oÿ>pý>qú@rø@t÷Aq÷CjÿMmÿSs÷Jhë@`ýTsÿg…ÿe‚÷]wï_xçh{Üp}Æqx§gg^X{ZQ—~wª™’¾°­Ä¼ºÆÂÃÈÇÌÇÇÏÃÃÏËÊØÌÊØÑÊÚ×ÎßßÔäæÛéêàëíãëïåæòèæôèèðäæîáèíàéêÝçäØâÑÊÑÁ¿Â««©‘–z†xl{hbu_`rXbpVboScmT21/320431651875984984984;:5<;6==5??7AA9CC9EE;EE;HH@HH>HHLC4J@4KA5MC9LB8F=4B90E<5C:5@93?74@85?75<74<42C:5B94A96>95?:7>:7?;8@<9B?:D@7G@6J@4L@0O@-O@+L?,G@.F?/I;0K81M53K65J88F;9B?:6904,«=,­<,³=/½C4ÄF8À>1º2&Ç9+Ì8*Ð8+Ö8-Û7-â5.é3/î1-ñ.,ô.-ó0,ñ1,ê5*ã7)Ý:)Û:(Ü9&Ô3Ð3 Ï8'Æ7'¾6(ÂB5ÏSIÈNCÏSKá\Wî]ZðPRí>Cò9?÷?GêAFßCDÕAAÈ?9»<3±;/°?ëHH>HH9H?:F=8B;5D:8A96?74?74@85@85=85;62=4/=4/=52<74=96>:9=<:>=9B?:D?9G@6J@4M@0O@-P?+L@*B?,B?.F<0H:1J65I56F35@65@<9:=6;>5@@4E<-J9)^B4€L>®QB«;- 2#¡6&£:'ž7$ž9%£>*¡;%§<(®?+³@-¶=,·9*¸6(µ7)ª9)¥:*¤9)¥;+¨>.«A1«B/«@.®?,«:(±<+¿E6ÆH9Á?1¼8+À6)Ë7+Ï7,Ð9.Ñ;-Ô8·;1®:-ª<-«=.¶E5ÆL?ÔNEÜGCã?>ï?Bú?Fþ@JøCJ÷CLúDPÿFTýBSù>Sü>XÿBaÿFhÿCiü?iù@jùBpüFvþJzÿK{ÿJzÿHtõKpñQsõ\zù_{ûXwüNqýEkúDlïEiÚKgÈ_p±nukLI~t°–‰Ì²¥äÓÉìãÜëçæêéîêçòíâóöãùûáúÿâýÿçÿÿìÿÿòþÿöþÿùûþú÷ýúõü÷ôúõòøïðôëîñèíïæëæÝàÜÖØÊÆų²®ž¡šŽ“Œ‰…ˆƒ•‡‰€†Œ~/.,0/-10.21/43/540762761:94::2<<4>>6@@6BB8CC9DD:IF=IG;JH;LI8MJ7NL7NL7OL9KI:NKBTRS_^fihxmm…lkŠkhƒ`YiYQ\OGRH@KH>GG=EE93>:1=9083-94.;60<92=:3>;4?<5@<3E>4G?4I?3L@0O?0P?/P?-L?,<;&:=(?<+A;-B71A62>42;30=84B;5H94N2.Y,)l/.‡;= FE£;0¢2$Ÿ1 ¤9'¥<)ž7$ž8"¢<&¤;&ª=)±A-¶A/¹>.»<-¾:-¾-­>-­<,²?-°8(¹>.ËL=ËG:¼6*º2&É9.Ð6,Ô6+Ô8,Ö:.Ø:/Ü8.ã6/è3,ð0-ô.+ô.+ð1)ç2'Ý6&Ô8"Ò7!Ý8$Ü5#Ú9'Ú>/Ó=.È6)Å9,ËA7É<5Í>8ÙEAåKIêJJéCCì?AëCCÞCAÕD?ÍB=Â=4¶:.®8*«:*¬;+¬8)ÀD8ÔNEÝIEà@@è>A÷BIÿHPôAGô@IùCOýGTþEUú@Uû?XþA_ÿDfÿCiÿCkÿFpÿIwÿK{ÿL|ÿJzÿFxÿHwÿKtúNtÿZ|ÿa€ýUvñCdûIkÿTvÜ?\ÍI`Ø{…¸||aC;|n®ŽÕ³§óÛÑûìåúòðù÷ú÷ôýôìûúëÿÿêÿÿìÿÿîÿÿóÿÿ÷ÿÿûÿÿýüÿþûÿýùÿúøÿøöÿõöýóôûðôùðóðçêåßáÓÏξ½¹­®¨¢¥ž£™£—£«žž¦—›£–/.,/.,0/-10,21-32.54/650880991;;3==5??5AA7BB8CC9HEQPL^]bmlzzz’‚¡€‚¨€€¦{u—rkŠe_{YSmTLdMEZG@PB;2?=1@<1?;/A;-F?/H?.K?/M@/O?0O?/P>0L?/@=*?>,@=.?;/?;2>93=:5:94<94D95M51V-+j)-„28ž8C«>C¦7.¥7(¥:(ª?-¨?, 9&¡8#¤;&¥:&«<)³>,¹@/½>/Á=0Å=1Ä>2½?3¶=2²9.®8*¯9+°:,²:,³9*¶;,¹;-ÄB4ËE9È>3¾1'À2(Í9/Ö5+Ø4*Ú6-Û7-Þ7.á6,æ3,ì1*ó0,ô.+ô/)ï0(ä2&Û4$Ò6 Ð5×2Ú0Ú4$Ü<.Ö=/Ð9.Í=2ÒD:Ä5-Å60Ê;5ØD@âMIåKIÞC?Ö=8Ó@9ÎA8Ç>4¾VádtþŸ§ÓŽd92lJ>¥ynÐ¥œõÔËÿéãÿôòÿýÿÿüÿùóÿüïÿÿïÿÿðÿÿòÿÿôÿÿ÷ÿÿûýÿüûÿýúÿüøÿúøÿù÷ÿö÷ÿõöÿôøþó÷öëïìãäÚÕÒÉÆÁº¹´³´¬±´©°¶ª¶¾³°¸­¬´©10,10,0/+0/+10,21,43.54/77/880991;;3==3??5AA7DA8IE:LF:NH:PJ:RK9RM:SL:QK=OJDVTUfdqwx††¨¹“ÃÆŽ‹À‡ƒ¶{w©pmšid_[~UPnNJaKGXEBM?=B;7895296/85,85,671783891;;1>5L?6K>5F<3B92=82:946;47<59<5>:1H4-Y2-w78”?D¦>E§9<ª;0ª<+«@.¬A/©@-¥<)¦;'«>*§8$­:'µ<+¼=.Á<-Å;.Ê<0Ê=3Å?6¾>3º:/·7,·7,¸8+º8+º8+»7+ÇA5ÍC8Å8.Á1&Æ3)Ë7-Ï5+Û4+ß3)á4-â6,ã5,ç5+ì1*ð/*õ/,ö/*ò/)ì0'â2#Ù4!Ð5Ï4Ö1Ù/Ø2"Ø6)×9-Ô:0Ö?6ØE=ÖF>Í@7É<5Ë@9ÖKDÙNGÒE>Å;1Å=1Â<0ÀCòBLûIUÿJYýFXúCYûC]û@_ûBdÿElÿJsÿNzÿO|ÿLyþIvÿJwÿTÿT}ýJqùImÿStÿVtøNiëD^äF]êXkÿ–¢ÿµ¼óžŽHFk.)¦kcÍ–óÈÁÿãÞÿñðÿüýÿýÿü÷þþöÿÿöÿÿ÷ÿÿøÿÿúÿÿüÿÿýýÿýúÿüøÿûøÿùøÿø÷ÿöøÿõ÷ÿôøÿôøýñóóéêäÜÚÖÑÍÍÊÃÉÉ¿ÊÊÀÊÍÂÉÐȾȿ·Á¸65143.32.10+10+21,32-43.66.77/880::2<<2>>4@@6B@4JD8ME8OH8RK;TK:TM;SL*F@*G?*H@+IA,IB0IA4HB6HA9G@:K=?ž51§;/ª<+ª?-ª?-©>,©>*¬?+°?-«8%²9(¹:+¿9-Ã9,È:.Í:0Ï<4Ë>5Æ;4Â91Á8.Á8.Â9/Â8.Ã6,Å7-ÑC9Ð@7Ã0&Ã,#Ð7/Ö<4Ó2*à3,ä2(ç2+è3*ê3+í2+ð/*ó-*ö/*õ.)ñ0)ì1(á4$Ú5"Ñ6 Ð5Ø7#Ù3#Ö3$Õ3&Õ5)Ô8,Ô<1Ö?6ìYQáRJÓHAÌC;ÊE<ÌI?ÈE;À>1¼:*¼;(¼:*¹:)·:(¸:+¼>0¿A3ÁA6Á<3Å<6ÏA=×EEÝGHäIMëLPèBFê@CðCIùKTþNYüJZüF\üF_øA_ùBaýEiÿJpÿNwÿOzÿNxÿLvÿQ{ÿRyþOvýOtÿVyÿ]{ÿSoîD^úTlîQd÷dtÿ’žÿ‹•ôƒ‰Ç`d§MMµjgΊＸÿÞÙÿïîÿúùÿüþýûÿýúÿþûÿÿûÿÿûÿÿüÿÿûýÿûûÿûøÿûøÿüùÿûúÿûúÿøúÿöøÿó÷ýñóùíïòææçÝÛßØÒÛ×ÎÝÛÏàÞÒßáÖÜãÛÏØÓÅÎÉ<94;8185052+41*41*52+63,74-85.96/;81=:1?<3A>5C?4JB7MC7PG8SJ;WK;UL=UK?SJCSJK]Wcnl‚‚‚¦‘•Åš ÚŸ¦ê¢©ñ¡¥ïž ë™›å•˜Ý”•Ö‘ʉ‰½‚ƒ±zy¡rq‘fc~XVkPN\IGRFCLCBJ??K==G;:@;9:<94?;/C=-E@,F@*FA+EB/EC4CC7BC;AC>@ACBLCANEEOCHNAIL>HI>GDCHAA=2L:.gF7ƒOAI<Ž?2”8)¥>/©>,«>*¬?+­@,¯@-°?-±<*±8'¶8)½9*Ã9,È8-Ì8.Ò91Ô;5Ï:4Í:3Ë81Ë81Ì92Í:2Ì70Ë6/Ó<5Õ>5Ò91Ì2(Î4*Ø;2Ú<3×3*ä1*é1'ì1*î2)ð1)ò/)ô-(ö,(÷-)ô/)ð1)é3(â5'Ù6%Ò7!Ï7 Ô9%Õ8%Ó6%Ñ4%Ò4(Ó7+Ò8.Ð7/ãNGèXPçZSÚQIÌG>ÄD9¿@7¹>/¹<*¹<&¹<(¹:'¸9(º;*À>0ÃA4ÉD;Æ@7É@:ÑFCÕIHÖHGØGJßIKæFHèBDíDIõLSüQZûO]ûL]ûK`öD^÷DaùFfýIlÿNuÿOxÿOxÿPw÷VxóUvôTvüYxÿ]{ÿZwûQkòI`ýWköUgêM^ö^mâKZæTaåTa×XaÁefȃ~嫧ÿÔÑÿëèÿóòÿøùÿþÿûüÿûüÿûüÿüüþüúýýùúý÷÷ü÷ôÿú÷ÿûøÿüûÿûúÿøøÿóóýîñúëîðáäéÝÝäÙÕâÙÒæßÕëçÛñíáññåìóìÛæâÎÙÕ@=6=:3:7074-52+52+52+63,74-74-96/;81=:1?<3@=4B>3JB7MC7RF8VJ:WK;XL?:6@<1A>/C@/CB0BC3BD7?D=>D@CVCIaLRhU\o\br`dobbjd`afXWaJDlG>ƒSE•XF“J7‘@+™>+¨A.®@/®A-¯@-°A.´A/²=+°7&µ7(¼8+Â8+È8-Í6-Ñ7/Õ81Ø;4Ò72Ð72Ð72Ñ82Ô94Ô94Ó83Ó6/ÞA:Õ8/Ñ3*Ö8/Þ=5Þ=5Ú91Ü5,ç2)ë0'ï0(ñ0)ô/)÷-)÷,(÷,(÷-)ô/)î2)é4)á5'Ú7&Ô7$Ï8#Î7"Ï8%Î7$Ï6&Ð7)Ò9+Ñ7+Î4*Ë4+ãNGód\ë`YÕOFÄA7º;2µ9-¸>)¸>'¹<&¹;%º9&½9*À2ÊD9ÊA9ÎE?ÕKHÓLIÎGDÍEEÖHGãIIæCDèEHòMSøSZùR\÷O^úOaôH^õG`øGdûIiÿNrÿQxÿRyÿTzðUuïZwù^}ý^|ùUpõMgùOiÿYnÿ[mÿctðM^÷TeôO`üUgõL_äR_À^_»vqל˜úÉÅÿåãÿíëÿôôÿÿýüÿÿûÿÿûÿÿûÿþýýýýüúþùöýøõÿøõÿùöÿúùÿúùÿööüððøéìôææëÝÝèÚÙäÙÓèÞÕðèÝùóåÿúìþþòôúöáëêÓÝÜB>5A=4@<3>:1<8/:6-84+73*62)62)73*84+;60>93A<6E>6I@7MC7RF8UI9WJ:XK;ZLA[NHTIMXR`gd|~§’Ê— ãžªö¥°ÿª³ÿ«²ÿ¬´ÿ¬²üª±ùª¯ó¨¬ì©«èŸ¡Ú™šÒÁ±tr¡he’]Z‡XR~XQzYQvVOnMH_C?M?:@?;:B?8>>4@B5BE:?D=:CB>FH?LUDVnQfƒarŽisŽtvx„o€€^lŠ[c’WYžWU¦VM¦M?Ÿ@.œ9$ :$§<(¬=*®?,±@.³@-´?-¶=,¹;,º6'¾6(Ä6*Ë7-Ñ7-Ö8/Ú91Ú83×84Ø95Ù:6Ø93Ø61Ø61Ú83Ý:3æC<à=6Ú70ã@7þ[Rÿlcÿ]Tç?6å3)í2)ñ2*ô/)ô*&õ(%ø(&ø+(÷-+ó0,í2+ã1'Ú0#Ô1"Ô4$Ó:(Ì;&Ê<(Í<)Ï<*Ò:,Ò9+Ò8,Ñ7-Ú@8Ï81ÜGAôc^åXQËB<Å@;·4*·:&¶<$¹<&º<&½:(¿:+Ä<0Æ>2Ç>4ÌC;ÙPJßXRÔOJÃ?:À?:ÏHDÞHGâGEæJKïPTñRWïNVíKXñL\ùRføOf÷Ke÷JfüMlÿQsÿRvýRvôWvîXuõXuû[wÿ\xÿZsÿWnÿVkÿbuýVgÿ\mÿ[lñFXôDXÿQeîVeÆfgªieʋ網øÒÏÿëçýïîüø÷ùýüùÿÿùÿÿúÿþüþýÿþüÿûøþöôþùõÿû÷ÿùöÿöôÿööÿõõöèèæØØãÕÔÞÐÍáÖÐñçÞüôçþøèÿüéÿÿóúÿùèñðØáàC?6B>3A=4?;2=90;7.:6-95,73*73*73*84+:5/=82@;5D=5H?6LB6QE7TH8VI8WJ9YK>ZMEUJNWQ_eby{¤ŠÉ”⛦õ£®þ«´ÿ¬µÿ®¶ÿ¯·ÿ°·ÿ¯¶ü¯´ø¯²õ©ªë¢£ã˜˜ØŒŠÉ€»uq®ie c^˜`WŽ`Vˆ]TVPtMIbFCTBAIAAC<<:AB=FEACD?A?@DBEOMRWVdch†quš}¢‡}Ÿ’}œ {š¥pŠ¤`u¬Yi¶VaºQU¸HF°@4¬;)¬<&­='¨8$¨7%«8&®9(°8'²9(µ7(¸6(»3%Â4(Ê7-Ó:2Ù<3Þ=5ß<5ß<5á>9ß<7ß<7á>9åB=èC=çB<æA;å@:æB9ä@7Ü8/Õ1(Ø6+ëI>ÿ[Oñ@6î6,ê+#î)#ø-)ÿ/-þ,+ö((ú0.õ4/ï61ç6.Þ3)Ö2&Ô2%Ï6&Ë:'È;'Ê<(Í:(Ï9*Ð7)Ñ5)Ð4(Ó9/Ï5-Ô=6åPJåTQÛLHÍB?·1(¼;(»=&½<'¾;'¾9(À8(Â:,Ä:/È>4ËB8ÕOFÜWPÒRIÃD=¿C;ÌHCÛLHßJFåMLëSRíTWëPVéNVìOZ÷VføUhùSiúRküRmÿSqÿStÿRuòMmøUtÿ\zÿ_{ÿ\vÿUoûRiûReüUf÷RbÿZhÿZhóN^øScþYißS^¶`_—^W¶}Ù©¥îÈÅýáÞùééýøõúüùùÿÿøÿÿ÷ÿýúþýÿÿýÿûûÿ÷õýøôþùõþùõþöóÿ÷öÿõõöêêêÜÛäÖÓÝÐÊßÕÌïåÛüõåÿùçÿýéÿÿïúÿøèñîÛáßEA6EA5C?4A=2?;0=9.<8-;7,84+84+73*84+:5/=82?:4C<4G>5JB7ND8RF6TG6WG7YIBZEJpW]‚cs˜r—¥z§®«²{£¸vœÀp“ÂcƒÀTnÂG\ÐK\ÑHPÄ<<º5.¸9*µ<'°<%°;'°;)²:)´;*·<,»<-À<-Ä<.Ä6*Ë8.Ó<1Ù?5ßA8á>7à<3ß:4Ü71Ù4.Ø3-Þ93æA;ìE?éB<ä=5ã<4Û4,Ø4+Û7-Ô2'Ì, Ö6*éG:õK>ò@6ï4-ð-)ö,*ú,,ü,,ø*,ð*)ì/+è2.ã5.Ü4+Ø1(Õ1'Ñ3'Í7(Ë:)Í:(Ð:)Ò;*Ó:*Ô8+Ô8,Ñ4+Ö<4Õ:5Õ<7åONíYWÙEEÂ3/À;,¿<(À;*¿:)Á9)À8(À8*À8,Æ=3ÇA6ÏJAØUKÒRGÆG>ÀD:ÇG>ÖKDØICÝLIäSPåSTâPSâMSåNWòXdöZhý[pþZrüVnúRlûQlÿQpýGmÿPvÿZ}ÿ[{ÿVrýTkþWkÿ\mûYhøZhûamö`kí]gïfnìfmÉ\_ ]W{OF˜mfÁ˜”ݺ¶ðÔÑôàßÿõôùù÷ùÿýùÿÿ÷ÿýúþýÿÿÿÿýÿÿøùüùôüùòüùôýøôÿùöÿøöùîìïäâåÚÖÛÐÊÜÒÈîäØýöäÿûèÿýçÿÿíúýôêðìÞãßIE9HD8FB6D@4B>3@<1?;0>:/:6-95,95,95,:5/<71>93@;5E>6I@7LD7OF5RE4UE5WG8WI>XMKXNW^Zqpp–€†ºŒ–Ô•¡é©õ¨°ù©±ù­³ý°·ÿ±·ÿ²¹ÿ´¸ÿ´¸ÿ¯±ü«­ø¥§òŸžê—–⌋ׂÍ}yÅum¶pgªf`ž_ZYX„QQuGGcA>Q=5DH8BT=C`@EnCJ€OU–]d«fx¿kÉnšËo˜ÉiÈ`ƒÉWxÆIgÄ;UÆ2HÙAPàEMÑ;<Æ71Ä?0½@,±:$­6"­5$®5$³5&¶7(¼8+Ã;-È/Û?0Ü@3Ü@3Ò6*æLBåJEÎ50ßGFóZ\ßIKÕA?È2ÈF9ÏOBÎPDÆH<¿C7ÁC7ÎH?ÑF?ÕJEÛPKÝROÙMLÚKMÜKPëX`ó[güaqÿauúXmõOgõMgÿNkÿOuÿRyÿUwÿTqüTmý[pÿcuÿjxÿguúboõamídlãflÙhjÎghµfa^TeG<^U©ˆÍ«©åÇÅïÚÙÿóóùøöùýüøÿÿ÷ÿÿûÿÿÿþÿÿüÿÿùúþûöûûóûúõþûöÿýùÿûøþôòøíéêßÙÞÔËÝÓÉíæÖÿøåÿþèÿÿæÿÿëøúïêïèãæßNH:MG9LF8JD6HB6F@4D=3C<2?80>7/=6.=6.=60>71@93?:4C>8EA8KC8NE6QD3RE2VF6VH;ZMGVMR[Whlk‹~‚±Š“Î’Ÿãš¦î¦®÷©¯ù­°ý¯³ý°³ÿ°´þ°³ÿ¯³ý«®û¨«ø¤§ô ¢ïšœé“•âŠŒÙ†…уÉ{u»mk¬dež_a’Y[„RQsNHbWFY_CQmBLEM˜MT¬U]¼[bÊZhÙRpâRußTuÙPlÒJbÍBWÇ8JÅ.?Ô8EãCKæGKØ>>Í>6ÌF:ÃH6¶?+·>-¸=-º<-½>/Ã?0ÊB4ÐD7ÕE:ÙE9ÚB7Û>5Ù;2Ù6-Ù5,Ú3+×3*Ô1*×4-Ú7.Ý90ß80Þ7/Ý6.Ü5,Ö/&Ù5+×7+Ï2#Í1"Ò9)Õ>-Ô;)Ø<-æD7øJAýD?ù64õ*-ö*-÷/2÷67í55â30Ú1,×0*×/,Ù0-Ù0+ã81ä91â:1â;2à<0ß=0Ü?0Ú>1Ñ7+ïWLøaZÓ;6Ñ;:æPQÜFHæPQÏ<4Ê:/Æ8,Å9,Ä:-Ä<.Ã;-À;,¾:-¾<.ÃA3ÇH9ÇI;ÂD6¾@2¼>0ÉF<ÊE<ÎIBÕPI×RMÕNKÓKK×LOéZ`ð^hüfrÿhxü]qòPeóMeýNkÿVzÿTxÿRrøTmö]qûhxûjw÷erüetó_mì`kêkrßruÃjfªd\žla}fVXH9kXJ”|r½ œÞÂÁîÖÖþîïûõõûûûûÿÿùÿÿýþÿÿþÿÿûÿÿúýÿþùûþõûüöÿþùÿÿúÿþúÿûõÿ÷òñèáäÜÑáÙÌðé×ÿúäÿÿæÿþåÿÿê÷ùëíðçèéáQK=PJ1ÃE6ÃE6ÅF7ÉE8ÎF8ÑG:×G<ÚG=Ö>3Õ;1Ö8/Õ4,Ö3*Ø4+Û4,Ú6-Û81Ý<4à=4ß<3Ý90Ü5-Ü5,Û7-Ò.$Ý;0Ú=.Í1"Æ-Î7&Ò=)Í:&Ì9'Ô8)â:/ó=9ÿ@@ÿ<>þ37ó,/ê,.á+*Ø*)Ô+(×/,Þ44ä88é99ï75ð74î73è71ã7-Ü6*×5(Ñ5&Í5(çPEÿmcÛHAÈ42×CCÓ>BêVVÙA<Ò>4Ë8.Æ6+Æ:-Æ/Á=.»9+»<-¾?0ÀA2¿A2½@.¼=.»<-ÃC6ÄD9ÈH?ÐPGÓRLÐOIÒNLÕONé^cîagûitÿnzÿduõVjõQiÿUoÿWvÿVtúXpñ^pônyöw€íksÞXañ`mñ`mìboïs}숊Ì|ªth™yjskXON:_VGƒqg¯–’ÜÀ¿ïÕØüéëþôõýûüýþÿúþÿþýÿÿýÿÿûÿÿùþÿÿûùÿõúýöÿÿúÿÿúÿÿøÿý÷ÿþöùðçíåÚéáÔôïÜÿûåÿþåÿÿãÿÿèùúêòôçîðåSM=RL4D=3B;3A:2@93A:4A96@;7A@;CC;IE9MG7OG2RF0UF1UH5WK?RHFXR^jg‚}§‰“Ä’žÚ˜¢ç¤§ö¦§ú«©ü«¬þ¬­ÿ­®þ¬®û¬®û¨¬ö¦ªô¤¨ñ£§ð¡¨î §í¤è›¢æ™žâ’šÛ‹“҆ʃ„ˆ·ƒ¨ˆyšmˆšcz©Xi»Q_ÏMYàIRèAIê=Aé=;ã>8ÝC9ÖH:ÎI8ÅF3ÂC0Å@1äTIàG?Ú;7Ø64Ø88Ø:;Ñ98È74À:/¾<.¿;.À:.Â8+Ã7*Æ4'Æ2&Î4*Ð3*Ñ3(Ô3)Ö3*Ù5,Ý6.Ü8/Þ=3Û=2Ü;1Û8/Û7-Ú6,Ø4*×3)Õ3&Ó3%Ð4%Ï6&Ò=)Ñ>*Ê9$À2È:&Ê4%Õ1'ç51ú<<ÿ=@ÿ7=÷37ê-1á-.Ù--×/.Ü43ã9:é;=ð9=ö26ø03ô01í1/ä1*Þ2(Õ1%Ï3$É1$Ñ=1új_äTLÈ95Ð@?Ë:=äRSäJHÜC=Ñ:3É6.Æ8.Å;0Â<0¿=/º;*¼?-½@.¼?-º;*º;(½;+¾<,¼>0¼>2ÀD8ÈLBÌPHÊNFÌLIÐNLèaeìaføhrÿo{ÿhx÷Zk÷UjþZrÿYsû]tîaræjtë}€ñ‡‰èwyÚ_dñgtþm|óeuëlwö‘•ì¢ŸÄ”Š¢|hjUHQSK>PJFë>êDFå@DÙ8=Î65ÍB;ÈD8ÉC8ÇA5Æ>2Ã9,Â6)Â2'Æ2(Ë3(Î4*Ó5,Ø5.Ù4.Û4.Û4,äB7Ý=1Ù7,Ú6,ß9-ß9-Û5)Õ1%Ø8(Í2 Ê1!Ï9(Î8'Ç4"Ê7%ÔC0È7&Î8*×6,Þ5.æ3/î53ö:9û?>ÿLKúHFòBBì>=ê<=ç7:å26æ,1ô+1ø)/ô,.ï/.è1+à4*Ù5)Ó7(Æ0!À.ôdYë]SÏ@:ÔDCË;;ßMMêRQàHEÓ;6É6/Æ8.Æ9/Ã;-¾:+¾<,Á@-ÀA.»<)·8%¸9&½<)¾?.µ7)³7+¸>1ÁG:ÅK@ÅIAÈIBËJEåa_æ^`ñdjþnwþkuó]iðXeø]mú^sõbtèdoãlrì~ù‹ö†…éqsøryÿy†õaqàXföˆ‘ÿ´´Ð®¢ ›‡]jPDR9QT?jbU›ˆÚÀ¿òØÙöàãÿô÷ÿúýÿþÿýüÿþüÿÿýÿÿûÿþùýûÿúôÿòòþòùÿôüÿöûýòÿýôÿÿôÿÿóûõç÷ñáþùåÿýçþüãþýáÿÿêÿÿñýýóüüòXO@WP@WN?UN>TK2G?2H>2F@4GC:GE9JG8NI6RJ5UJ4UJ4VK9XNDULMZTbkhƒ{~§‰Ã‘™×˜Ÿç£¤ö¥¢ù¢¢ü¡¢ü ¤ÿ¢¨ÿ£«ÿ¤­ü¡ªõ¡©ñ¡¨ì¥¨íª©ï­©ó±©ö¬©ø ©ø—§ò’¡â–ŸÖ¦£Î¶ž¾¹…œ¸gz¿L]ÑERß>Mç;Gç?ß<=ÝEBÉ:4ÊD9ÊF:º1)ÛJEèJIéCEë>Bè;?æÚ<=Ô<;ÏB;È?7ÊD;ÑMAÍK>¿=0¸6)½9,¿7+Ã6,È5-Ë2*Ñ/*Ô/+Û2/Þ5.çA5ß9+Ù1$Ý3&å9+ç;-ß8&Õ2Ï2Ì4Ê5!Ç4"Ç4"Ê4%Í5'Ï5)Ê0&Ï2)Ñ5)Ò6*Ò4(Õ3&×3'Ü4)à2)æ3.ë52ë33é/2ç-2è-4í.5ö-3ö+/ï+,ì/-ê5.ã9,Ù7(Ð4%Ã-Ä3"çXHéYNË;3ßNIÅ41ÚHHáOPÜJJÔC@Ì;6È80Æ8,Ç9+È<+Å<*Â;(¾9&¼;(»<)º=)º=+·<,´8,µ;0¹=1»?3»?3¾@4À@5ÄA7ïjaõpiêc_ômjûqqìadôgmÿpyÿlzûhxðdoébiëdjîlnîqoîqoûy{ÿ}…ùZlücwßbpû¬¯¶ªš}‘u]rQJY:LR8snZ¥•ˆË·°íÕÓÿîðÿö÷ÿ÷ûýøüüüþþÿÿþÿÿÿþÿûÿþðÿôåþéæûêïÿîøÿöüÿôþÿóÿþñÿýñÿûîÿúêÿùæÿùãÿùáÿùáüúåÿÿõÿÿûÿÿûYPAXO@XO@VM>UL=TKÌLAÁC5¸:,·9+¹7*¿7+Æ6-Ë4-Ñ2.Ø3/á53ä84ä>2á;-Þ6)ß5&á5'á5'Ú5"Ó4Ñ9$Ë9"Ç9%Ç:&É<+Ë<,Ì8,Î4*Õ3.Ö5-Ó7+Ï7)É6&Ç4"Ë4!Ï4"Ø2$Þ2&ã0+æ.,æ,-æ,/æ-2è.3ì+.í,-ì0.è2.à4*Û5'Õ8'Ò9'Õ?.»*ÖD5Ð>1ÙF>ëVPÚB?ØBAçUVâRRÜKHÔC>Í=5É9.È9+Ç8(È;*Ä;(¿:'½<)½>+º?-¹@/¶>.²:,´;0·=0¸>1º?0½?1ÁB3ÅC5ëi\òmdçb[ðkfõolèbañklütxÿq~ÿo|öirí]fêY`ñbf÷qpþzxûvwÿx~ùRdþ[pä]nö¦©©¦“jŒkZtON_;SZ;us\©ÖĸöáÜÿõñÿúúÿúûÿûüüüüúþýûÿþúþÿõÿúíÿóáÿéáýæéÿëóÿñøÿòýÿòÿÿñÿýïÿýíÿúéÿöåûóàúòÝüôßü÷äýúóüüúÿÿý\PB[OA[OAYM?XL>WK=VJDã=?å==åAá>CàBè;?ã9<Ü68Ö66Ñ96Ì;6ÕHAÄ;1¾5+ÅA5ÍK>ÆH:»=/·8)º6)¿7)Ç7,Ï6.×50Þ71æ95é=9×3*×5*Ú6*Ü6*Ý5*Ý7)Ú:*×>,Å4!¿4¹4!¹6"¼8)½8)½3(À-%ã@;å>8Þ=3Õ<.Ì9)È7$È7"Ì7#Ò7%Õ3$×/&Ù.'Û.*Ü.-Û//Ü./Û,)ß0+à5-Ü5,Õ3&Ð4%Ð9&Ñ>*ÔA/Â1 çSEÒ;0ÚA;ÞC?èJIðTUíUTçSQãOMÝJCÖC;Ï<2Ê8+Å6&Ä7&À7%¼7&¹:'¹<*·>-µ=,²=,°:,±;/´<.µ=/·=.¹?0¾C4ÃE7Ü\Qêg]äaYðlgöpmça`ìfgójqàR^ï^kõhqòemñ`gôeiùqqþxwútuÿnuóJ]øRhä[mñœ¡£œŠa€`UoHOd=W`Aww]­¥’áÑÂÿîæÿøñÿüøÿþúþÿúûÿüûÿýûÿýùÿûóÿöèÿîÜþãÚøÞáùáèûåïüèöýëýþìýúéÿúêÿ÷æúñàôèØòçÕöëÙøñáþúñýüøÿþû\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8PF:LE;KGEç=Fã?FÖ:>Ñ?@ÑEDÆA<º61Å>:êZYÝABã@Cæ=@ã:=Û89Ó97Ð<8ÎA8ÏE;Â:.»2(À/¸9(½8)Â9)Ë8.Ò:/Ù80à91è;7ë>8Ø1+Ù2*Ü3,Ý5,à5-ß7.Û9.Ö=/É7(Æ:)Á<+¾<,¿;.Á;0Å<6Î95ëC@í@<ä@7Ù=1Ï9*Ç9%È:&É;%Ï<(Ð7'Ï1%Ñ1%Ô1(Ö3,Ô1,Ñ/*Ó2*Ó5,Ó7+Ð7)Í5'Ê7%Ì;(Ì>*Ì;(Ï<,ô^PàF<Ò3/Ò.,æ@@ûWXÿusÿroÿjgö^YçPGÕA7Ç5(½. Ä8'À8(»8&¸;)·<,µ=-²=,°<-¯;.­<.°.¼B3ÀF7ËMAß`Wâa[ôpløtræ`aä]aæ]dÖHTçYeógrôgoöelükpþsvþvvûpsûenñDXôKbåXkë’– •ƒ_zYQlCSh?\gEy|_°ª”çÜÊÿõèÿùðÿûñþþôýÿ÷ûÿúùÿúöÿøòüóêûëÚøÞÎóÒÊëÌÏìÎ×îÒàðÖéóÛò÷áöõáûöãüõãõìÛíáÑéÝÍíáÑñèÙüõíü÷ñþùó\PB\PB[OA[OAZN@YM?YM?YM?WK=VJ@Ð@?ÐIE¿>8³2,ÈC<àUPÜDCáACã?@á>?Ú?=Ô@<ÑD;ÏF<Ç=2À8*½5)½9*¿=-¿=-½;+½<)Â:*Ç;*Ï;/Õ;/Û8/à8/ç83é:5æ95ä52ä20æ21ç32æ40Ý2+Ô0'Ë1'Ë7-È:0Ä7.Á4-Ã40Ì:;Ý?@ë8;í76ä71Ø5,Ì4&Æ5"Ä7#Å:%Ë=)Ë8&Ì4&Î5'Ô8,Ô:0Ó9/Ð8-Ð>1Ê;-Å8'Ä7%Æ9'Ç<)Ç<)Ç:(Í>-Í:*Ø>2áC:Ô/-ä::à24ß56×53Ö;6ÞC>åKCêQIêSHèTHäUGË?0Ä?.¾<,¸=-·>-´?.°?/®>0¬<.¬<.¬<.¬=,­<,±=.·A3ºD6ÆLAÞbXâc]ðnlôrrå`cå`eç`g÷kvûoz÷kví`hð_fýlqÿx{ÿy|úmsø^jóAWôC]èUh懣“ƒg]YtI^uIhwPˆf³²–èâÌÿúéÿýíÿþïýÿòûÿôøÿôôÿñíûêäòáØî×Åèǻ伺޺¿Þ¼ÇàÀÍâÃØæÌãëÓìîØôñÞ÷òßóêÙìàÒèÚÍêÜÏïáÖòèßñèáòéâ[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJQI>QI>SK>UL;XM9XM7YL9XM;WK?ULGYSWe^nnjƒut–~}¥„…±†‰´‡‰¹Š‹Á‹ÈŽÏŽŽÔÕӔӋʃˆÀ|¸u|²ov­io«ljœ€lˆ“cy®YvËPoãBdð7Vö4L÷8Hï@EåFBÝJCÛJEáGGèCJò=Nð>LäCI×CCÌA>ÎIDº;4°4,ÉI@ÕLFØBAÚ?=Û;;Ú<;Ø@=ÔE?ÍG<ËG:À8*Á8(À8*¾9(¼9'»8&½:(À;(Ä;)Ê=,Ò<.×;.Ü8.á6.ä6/è50é32è./é,0î02õ47õ77î45æ21Ú.*×4/Õ62Ñ32Ï/1Ò/4Û6=ê:Dí06î02æ3/Ü3,Ñ5)Ê7'È9(É<(Æ8$É6$Î6(Ó:,Ú>2ÝA5ÝA5ØA6ÓG8ÉA1Â;(À9&Ã<)Æ=*Å<*Å8&Ì:+Í7)Í0'æC<Û2/ï?Aã/2Ú*,Õ1/Ò5.Õ81Ö90Ò8.Ì5*Æ2&À1#ÎE5ÆA2¼=.µ:*±9)¯9+«:,ª:,«;/«=0¬>/¬<.«<+­<,²>/µA2ÉSGàg^àc_êjiînoæchðjqõoxúq{ýt~ömuîbködnÿrzÿx~ÿquúipøWfùAYô@[êQfá~ƒ¬—†ykmˆ]o‰ZyŠ`—r¶·˜ßÞÂùôÞüúåÿÿïûÿïõÿïïÿëçúäÜïÙÐãÍÅÞÁ°Ö­¨Ó¦ªÐ§°Ó«¶Ô®¼Ö±ÇÚºÒßÁàæÌèêÔòíÚòéØîâÔìÛÑêÙÏìÛÓéÚÓæÙÑåØÐ[N>[N>[N>[N>ZM=ZM=ZM=ZM=YLUL=XLNÝAEÔFDÈA=ÉHB´:/±7,ÎOFÉB<Î=8Ð64Ï10Ð51Ó>8ÏE;ÈF9ÃD5¾9(Ã:(Â:*¿:'½8%¾9&¿:'Á:&Ä9&Ë:)Ó:,Ù9+Ý7+á5+ä3+ê3-ë*+ñ*-ø-3ü/4ÿ17ÿ37ÿ38ý58ù8;õ8<ò9>ò9Aô9D÷7Fû6Hþ5Eô+5ô-2í12ã4/Ù6-Ð8*Î;+Î=,Ë5&Ñ8*Ù;/ß=2â>4ä=4å>5ßA6ÙJ<ÏG7ÉA1Ä<,Â9)Â9'Æ8*È9)É2'Ó9/á@8ëD>Þ0/à..ë46è66Ø3-Õ7.×90×:1Õ;1Ò;0Í:0É;/ÖL?ÌF:¿@1´9*°6)¬6(«7*©8*¬;-­=/®>0­=/«<+«<+­<.±=0ÀKAÚdZÞc^èkiðosêinõrzüvîfp÷oyùryöjsþlvÿwÿv}ùhoùcn÷RbþB[÷ZM=ZM=ZM=ZM=ZM=YLVJ>XL>YN5É83Ç/,Å*&È/*Í:3ÌC9ÃC6¼>/À;*Ä;)Ã<)Á:'Â;(Ã<)Â;'Ã8%Ä5$Ê7%Ô8)Ù7*Ý5*á3*å3)ê2*õ33ÿ58ÿ8<ÿ4:ÿ-2ÿ(-ÿ(-þ+1ü-3ö)0ò&1÷)6ÿ,?ÿ*Aü 9ó/ö"0ó(.í,1æ0/Ú1,Ô3+Ñ5)Ð6*Ô6+Ý90æ=6ë>7ë:4è71è50â92ßH=×K<ÓE7Ë=/Ä6(Â3%È6)Ï8-Î4*Ô6-æC<ß82à21Ò ì89å63Õ1(Ò4)Ò4)Ï5)Î6+Ê6*È5+Å7+ãYNØRFÊH;¾@2·;/µ;.µ<1µ<1¯9-±;/±=0±=.¯;,­9*­9,®:-±<2ÐYQÜb]ìppôvyîmrõq|ör}ÿzƒÿ‰ÿy€ôhq÷epÿq|ÿuÿktø^jöOaÿA^÷8WéG^Ûntº‹™©„‚žn~šg—hœq¡©‚´º–ÈÍ­ÕܽÌÙ»ÁÔ´²Ì©§ÂŸž¼˜š¶–²Œ±†‰³†µ~¹„•À‹œÂŸÄ‘¨Å™²È¡¾ÎªÉÒµÚÙÄæßÍêÞÒéÖÏáÌÉÛÆÃÔÁ»Î½µÈ·°ZM=ZM=ZM=ZM=ZM=ZM=ZM=ZM=XK;XK;XK;YLYM=WMCWLHXNOZPX]Ub`Yia\rjfokŽsp›vq§{u³ƒ~ÁŠƒÉŠƒÇˆÀŠ~¼ˆy²ƒr¨†r§t«‡l£†\„HL¤B9¶A:ÍC@Þ@?è:;ô<>ÿDE÷><ó=<ì>=ê@AëBIêCMëANãALÐ>>Å@9¾?6·>3°,º7%Á:'Ã<)Â;(À9%Â9&Å:'Ç:(Ë:'Ð9(Ö6(Ø2$Ú."à/%ì7.õ=5õ82÷40÷0-ø**û&(û%'û%'û%'û&*÷!)ø".ÿ'7ÿ(>ÿ!;ÿ6ý1ÿ'8ï#,æ#+ã+-Ý--Ô+(Ò-)Ü41â62è64î66ò65ò12ï./î,,å/,Ü92Ñ:1Ò91ìSK»"Ä+#ßF>È.&Í.(Þ<7èE@â:7Ø/*Ú.*â51å<7ß>4Õ<.Ï5)Ë3&Ì5*Í;.Ë;0Å8.ìbXàZOÈC:¹6,º:/¸8-±3'´6*°0%°2&®2&¯4%°6'²:*´<.³=1°:0ºC;Ö\Wìppñsvöx|ûyƒõq|ÿ|„ýw€út}üs{ÿr~ÿr}ÿmxÿgsü`nôI\ÿ>\ÿ>[äAVÔek´•€’¡zƒm}™f~”c‡—j”Ÿwž¦ ¨ƒœ¨„’£Š£|€Ÿvzšqyšo|r vƒ¤u‚­wƒ³y‹¸‘¼„“¾†—¾‡œ¾Œ¢½§¼“¯½š¾Â§Ï̹ßÓÇãÒÊÜÇÄÔ¿¼Ìº¶Á²«¹ª¥ZM=ZM=ZM=ZM=ZM=ZM=ZM=ZM=XK;XK;XK;YL]P@[OC[NFYNJZPQ\SX_U^_Wfd\tibƒng‘qjxp¬€y¼‡€ÄŠÄ€Á~ºt«Œn¢—q¤¡u¨šjž™W{=Aª5+±5+Â<3Ó@8Ý>8è?:óA=õ=;õ;<ô;@ñ>Bî@IèAIâ@KÚAFÇ<9½=4¶<1±;/«:,®:+½A5ÐJAÚG@ÜA=Ô63Ð51Õ@9ÍC8»9+²5#½8'Â;(Ä=*Ä=*Ä;(Æ;(Ç:(Ê9(Ï9(Ï6&Ô2%Ú2%ã5*ê8.ï80ð91ç1&ç/%ê.%ï,&ö+'û+)þ,+ÿ-.ü*-ú%+ú$.ÿ'7ÿ$;ÿ7ÿ3ü0õ0ö.9õ3<å*1Û(,Ü.0Þ02Û+.ñ:>ô7=÷4:ö26ö/4ø03ù25ô87Û2-Ú;5×82äE?äE?Î/+Ñ2.Á"Ô51á?:èE@à=8Ø3-Ù2,Ý60Ý:1Ô:.Ï9*É5'Ç5(È9+Ê<0Ê<2Æ9/ícYáXNÉ@8º4+Â91Ã:0¿6,Â9/¿5+¾4*½4*»5)¸6)µ5(´6(°6)´;0»B9ÓYTèljïqtöx|þ|„øv€þ|„üyùv~þuÿsÿp}ÿkwüdqý_nöI]ÿ>\ÿ>\éCYÓeh®Žw‰˜oz•bu’\xŽ]cŠ•k˜p‹•p…”mp‡]l‰]h‰\g^k_q•ey›izŸk¬t„±vŠ·|»}¼“¼‚–½†›»‰›µ†¡³‹­¶—¾½¨ÏÆ·ØÇ¿ÖÁ¼Ï¼¸Æ·´º¬©²¤£\L<\L<\L<\L<\L<\L<\L<\Lù:Aö=Eï@GæAHÙ@EÏ@BÀ;6¸90±9+­9*©8(­9*»?3ÏF<ÙD>×96Ù74Ú;7ÜC=ÝOEÎH<µ3#¾9(Á:'Ä;)Æ=+É=,È<+É:)Ì9)Ï7)Ï2#Ó/#ß4*î=3ô?6ñ91é4+à4&ß5&â2%å/$ë,$î+%ñ+(ò+(ó+-ð(+ò&/ø(6þ%:ý7ü3ø3ô%7ò0;ó5Aò8Cð;Dðä,6ð2<ó/;ö.9ö-7õ.3õ.1ó/1í42Ü0,â=9Ú64ß;9ÿmjåCAÑ/-Î/,Ù:7ß@<àA;Û<6Õ7.Ö5-Ö5+Ò6*È6'Ã6%Â6'Ä8)Å;.Æ<1Æ<1Å;1ë`YáTMÉ<3¿0(Ë;3Ñ>6Î;3Ò=6Ø=8×<7Ô=6Ï<2É;1Ã9.¼6*¶6)¹;/¼@6ÏTMãgeíorøz~ÿˆû|ƒû|ƒûyûx€ÿwÿsÿn}ÿgvû`pü[mõG^ÿ\ìFZÎ`až~ev…Zi„Qh…OmƒRt…X{ˆ]}ˆ^x„\q‚X`zM_Pa…UeYn•`uœg} j~£mƒ¬r„²tˆ¶x‹¹y‹¹y¹z‘º~”º“±•¬€›©†©­’ºµ¢Ç¹®Ë¸²È¶´¸¬¬ª¡¢ —š[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<^Q@^Q@]OB[OC\NE[NF\OI]OO^P_bTmdY{i^‰pgœ|t­…{·ˆ{³™…º¥…´¯€ª¸z¡ÆxŸÑuœÌcŒÈMlÜFRßA@ÕA=ÏE;ÌH;ÍG;ÓE9ÞA:î@Aõ0ÎD:Õ<7Õ31à;9åA?áD?èSLßUJ¿:+Á9)¾7$À7%Ä;)É=,Ê=,Ë9*Î8)Í4&Ò2&Ù2)å9/ñ>7õ>6ð5.ä/&à6)Þ6)à4*ã1'ç.)ê-)ì*(ì**ê),è',ë'1ò)9ö&<÷!;û=û%Aû6Hä(6ç.<ÿP\ÿ`lÿP\ò;åGDÛ=:Ú<9Õ:5Ò80Ñ7-Ð6*Í4&Æ3#¾5#¹6$»8&¿;,À9é=9æ?9á@8Ù?5Ð<2È:.Á9-»9,»=1ËNHàc_ìnoú|ÿ„ˆý~…øy€øy€üyÿx‚ÿt‚ÿn}ýetù^n÷VhóE\ý8Vÿ^N>\O?^NA]OB^PE^OJbNYbQdcTqdZ}le‘xr¢w¨ƒv¤”}§¬†«Â‰©Î‚žÚw”ál‰ÛXwÚD_óBTúDPïJPáIHÐE>ËE<ÐF<ÙD>èBBð@Cõ@GõBHíDGßCDÏA=Â?7¿@7µ=/®:+«:*ª9)®8*»;.Ì?6áFAâ=;îBBëAAÞ;6ãJBæXLÕK>È@2À8(¼3#Á8(È<-É:*Ë7)Ð8+Î0%×3)à8/é;4í:5í60ë0+å,'ã0,ã1-ç10ì31ó25ö37÷48÷6;ì-5ê,6í.=ñ0Có-Fö)Gý+Nÿ3Rô9Lå3?ð@Mÿ_lÿlzÿWfõCSõ>Pî3Dí3Aí3>é6<ã99Û83Î4*Ç/$Ë2*Ç.(Ð72òYTö\ZòXVÛA?âHFÜB@Ô<7Î70Í6-Ï8-Ï9+Ê7'Â5#¹8#³9$µ:(¸=-¹;,¶6)¼7.Æ=5ÛNGÙEAÎ50Ð1-á>9ç@:ã81ç51ë20î21ë52ç83á:2Ø:/Ð9.È:.¾6*º8+ÈIBÜ_Yënlû}€ÿ…‰ýƒõv}öw~üyÿx‚ÿsƒÿk}ýdvù^pôSeôF]ý8Vþ=ZïL]ÀTRz_BWhÑC?ÖEBãEFèBDîAEíCFçDEÚEAËB:¿?4»?3±;-©8(¨9(ª9)°8*¼:-Ê;3èIEé??ë=>å78Ú2/ÞA:îZPôh[ÚPCÉA3¾5%Â6'Ç9+È9+Ë7+Ò8,Ñ0&Ú6-æ;4é;4ê40è/,ê-+ë--ó49õ3;ø3=ü3=ÿ1>þ0=ý1=ù1>õ0Aò1Bô4Kõ5Nõ0Nö-Oÿ1Xÿ>_æ3HùO\ÿanÿ_nÿWfûP`ôDXé8JóAQê:GÝ2:Ò/2Ê2-Â8-½;+¼:*Ä:/À2(ÙJBúkcÝLGáPKÏ;9Ï;9àLJÔ@<Ê70Ê7-Î-±9)¯3'º:/ÊD;ÖGAØC=Ô72×2.ç;7ì:6è2.í2-ò,-ô,,ò./ï31è71â:1Ú<1Ò>2Â6)º4)ÅB:×XRçjhú|}ÿ†‰þ€„õv}÷xýz‚ÿx‚ÿqÿi{ûbtø]oòQc÷I`ÿ:Xý?[ðO_ºQNqX:Sf8]uEa|InSv†Y{ˆ]~‹`g‚—l€œl}Ÿm|¤o}¨p€©o‚ªnƒ©l…©lˆ«qˆ®qˆ°r†³r„³oƒµp…·r‰¸t‹µv‰¬tŽ¥wš¨„°´™ÈïØ̾ÚÑÌÂÂÌ«±Á›¡±ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:]L:^K<`J<^K<_L=^M;_N<^O<^O<^O:_P;`O;aP>aP>aP>aPÉ@8¾>3¸>1¯9+¨7'©:)­<*´<,Á=1Ï?7ß=:å99ã03â/2à42Û94æMEülaòh[ÙQCÆÍD>Á63É;7äUQÕF@É91È8-É:,È9(È9(Ä=)±?'¦<&¨;&¬=*«7(¬3(¼=4ÓLFÖGAÝE@Û96Ü30é73ì51ë0+ô1-ý,/ÿ+-ú./ô1/í4/æ81ß;1Ø>2É9.½3(À;2ÏNHáa^÷yzÿˆŠÿƒ‡ùzû|ƒÿ{†ÿx„ÿn~þew÷^põZlëL`õIaü9Wû=YîM]²JGhQ1Qd6\tDf~Nuˆ[Žc„h†’jˆ—n‰žsˆ¤t„¦t§r}¨p¨n©mƒ©l…©l…¨n‡«n…­o…¯o°l€²k‚¶n…·r‡³t‡­t§wœ¬…²¹šÈƯ×νÙÒÌ»¿Ê¤¬¿’š­[J8ZK8[J8ZK8[J8ZK8[J8ZK8[J8ZK8[J8[L9\K9\M:]L:]L:^K<^K<^K<^M=^M=^O<^O<\O<`Q>aR=aR?bQ?bQ?aP>aO;bL>hOKgNRbP\cWkjfuv”}|œx—‘z–«•Æ„’Ú}…ðuzþlmÿY[ýDLþ/Iÿ5Rÿ4½=0µ?1¬;+©8(­<,´?.»@1ÊA7ØC=Ù74á85Þ..â30æ:6Ó0'Ï5)ëUGÿwjë[PÑC7Ê<0Ë;0É7*Í6+Ô:0Ú70ß82å63ç32ê01í12ô36ý4<þ%6ÿ#9ÿ"9ÿ"9ÿ!8ÿ6ý5ø6ï2î9ð%Bï(Gî&Jñ'Mÿ3\ÿEhÿbuÿ`l÷WcñQ]òP]ïMZâ@MÔ2=Ú=FÌ7;»/.®/(¦5'¢;(›?&œ>%ª9'²8+ÒVJ»;2Ä?8¾41½2/ÎC@åWSÕHAÈ91Ä6*Å6(Ä5%Æ5$Ã:(±<(§:&¨7%­9*¬4&¯1%Â?5ÛRJÙIAáHBÞ;6Þ2.ê41í1/ï-+ü22þ,/ý+.ù+-ó++í-*æ1*ß4,Ö8,Ñ=1¿2(¼7.ÈIBÙ\Xówwÿ‰‹ÿ‡Šû€…þ†ÿ}ˆÿv„ÿj|þ_s÷XlöTiêD\õD^õ6Uñ:VàLZ¥HC^K-Mc5Uo?b}JtŒ\€–g‡˜lˆ›nŠ r‹¥vŒ¬z†«wªr~§m|¥i}¥g¥g‚¦i‚¥k‚¨mƒ«m‚¬l®h~°i³j„¶o‰¶s‰¯rŽ¬x™°„­»˜¿Å©ËʵËͶ½Åžªº‹—§]K7\K7]K7\K7]K7\K7]K7\K7^L8]L8^L8]L8^L8]L8^L8]L:]J<]K=^L>\L<\L<[N=]P?^SA`SB_R?`P@bQAcRBdQBdNAdLBjMIhKMdPYf[lnk†w{ž€…­‰ˆ²ƒ©¥‡©¾ˆ Ð‚’ây~ðsqújbÿa^ùJWñ>Që:Lî?NïCQê@KæFá9Ê=4Á;0¸:,§6&¯A0­<,¬6(¿A5ÌF=Ì=5Ð72Ú85Ü71Þ5.Þ6-Þ8*Ý<*×:'Ó6%Ù;0ðSLòZOÙE9Ç8*Í>.ÔB3Ò:-Ô3+ðGBá//î5:ó6=î,7ÿBMñ'3ú&2ÿ)2ÿ(2ù'ý"*ÿ'/þ'/ð&ð)ù+7ê .ì&7ñ-Aç#;ÿXrç-Dÿ]lÿ_iþZcùU\õPWëHMÝ?@Í84Ë>7ÄA7·?1¦7&™2!™6#š;'Ÿ<)§8-®7/ÂE?¿;7½31Ä64Å54ÔDCÛLHÚKEÑD;È:0Ä4)Ç5(Ë4)Å5*¼1¹=3Ö_Yésqÿû„†û‡Šÿ„Œÿxˆÿh}ÿ_wÿ[uÿUoøLføEcñ:Yô;[æ?YÛ]i‹@;VF-L^6YuBg†Mw–]}œcg€¡jƒ¦n‚¨o€§n¦m~¥l}¥i|¤h}£f£e£f¥l¦m«l¬k~­g®f±gƒ³i‡µm‹´r°vŽ®|™´‰§½™±Á¤²Á®¦²°˜žz…‹]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^K:\K;^L>_M?^N>[N=[N=\Q?^RB_SC]QA]OB_OB`NDbPFcOHeNHiMJgNQeS_g_tnny~¨€‡»‡ŠÁž•Ê£‹»«£¹xÓyƒê|{ôvjöi`ø]aóOZìFRòHSøIVõEPï?Jë;Eä9?à:<Ú::Õ=8Î?7Ç>4À/Ç8(Ê8)Ó;.Þ;4öJFä01ð6;ö6Añ.<ÿ@Nï'4ó$,÷%(û),ý+,ü*+ø((ö((÷+,ï$'í%(ê%,ý;DÙ'ð4CüARØ&6ÿjuÿbjþZaüW]ôOSåBC×<8Ñ>6¾8,¿D5¹H6©>,™/)(’(ž-%°:6ÑTPÎHGÃ54Æ45Ñ==ëWUØGBÖG?ÐA9Ç9/Æ3)Ê6,Ð7/Î70Ç=3Â91Â5.Ã2-É4.Ñ83Ø?9ÞE=äJ@ÞA8Ú6-Ý0*ç0,ò21û03û03ô02ó12ô01ó/0ó0.î1-ç4-ß9-×=1¿3$¾aP@`P@]P?\O>[O?[RC[QE[QG\OG\OI_PMcQOfTTgUUgUUgV\h]nli†sv£|ƒº‚ŠËŠÔ˜‘× ŠÊª‚´¹}ŸÏ€“䄆îvósjûeg÷S\íGQðFOöHR÷EQòAKî=Eä7=à7:Ù99Ô<7Í@7ÅA4¾?0¶>-­>-ª<+«:,¸B6ÇH?À;2»0)Ê:2Í6/Ð6.Õ7,Ø8,Ù7(Ù8&Ü9&à:*Ý4-Û4.âA9éOCÞH:È5%È2#Ù@2â>5õHDè13ò5;ù7@ø4@ÿESø2?ð)0ë#&ì$'ù13õ-/ï''ì&%õ12ë)*ö8:è+1â)1ë3=ÿR^ï=Kÿ[gþ^fñV\îOTðMRêEIÝ:;Õ74Ô?9À6,Á?2¼B5³=1¬7-¥3)¡,#œ' š%©/*ÇECÂ::¼,,È35×ABô^]Ð?:ÒC;ÐA9Ë=3Ì9/Ô=4Ú@8Û@;Û@<Ø=;Ý>;ãA?ä>>à::ã?=ëIDàB9Ý<4Ù5,Ý2+ç1-ð31õ12ø02ô02ô02ô01ó/0ó0.î1-ç4-ß9-Ø>2À4%º8+µ;0Ð[Tízwÿ“’û‡Šúƒ‰ý~‰ÿr‚ÿdyÿ[tÿTqÿNmÿFgû=_ô=\îEbßTg¢AHp;3SH2Qa<]xEf‡Nr“Zu˜^tš_xžc{£g{£gy¢fy¢fy¡cx byŸby a| bz cz¢f{¤h{§h{¨e{©a{©`}«`®`‡²jŠµn‹²s‰¬t†¦w‚žuy“no†lSeYAPM2A>^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^L8`N:aP<`Q>]P?ZN>YOCXPEXOH[QO_UTbXYeX_iYcl\fk^glaildqok‚rtšy~µ†Ê…ŒÚŒŽáŽ‡×Ÿ‹Ó­ŠÄ³€©½yŽÌ{Þzò‚wÿsrÿcgùU\ôMTõGPôCMò>Gï-±=0¼F:ÌRGÇH?º5.º1)È91Í81Ó;0Ù=1Û;-Ù6'Ü6&à8+à5-Û2+à=4ìNBãK=Ò:,Ñ8*àB6ß7.ð>:é/0ð16÷4<ü8BÿNZÿLUý>Eò38â$&í/1ê,,ð22è**ë/.ò::Ñæ37Ý,2è9@ðEMÿXcóMWØ=CÚADáBFá>AÞ9=Ü89Ø88Ó97É83Â91½:2ÀA:ÍNHÖVSÐNNÃC@²72¶95ÏKIÙMLãQRïYZêRQñYVÉ51Î>6ÒB9Ð@7Ó?5ÙB9àC<â@;é?@ç8=ì9=ò?Cï:?è58ì>=öMJÞ93Û60Ú3+Þ3,å4.ì30ò21ô01ô02ö/2ö01õ/0õ/.ð0-é4-à8-Ù?3Â6'·5(³9.ËVOï|yÿ“’üˆ‹ý‰þz‡ýoücwÿXqÿOlÿFhÿ@cû9\ô?^éKdØZh…35g;0WO8WgCa{Kj‰Ps’Yt•\u˜^wby¡ez¢fw dv awŸavž`xŸ`xŸ`{Ÿaz cz¢fz£gz§fz§bz¨`z¨]|«]~­_†²g‹´nŒ³tŠ­s†¦u€qtŽii€dQcUDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M9]K5_M5`P9_P;\O>ZN@XOFXQKYPQ`W\g`hnfsshysg{sg}qh}ol}pq†rw—v}«z‚Á‡Ò„ŠàŠ‹å“ãŒÚ „¿žuŸ l‚¬nq¼vlÒviòsmÿllÿgiþ^`ûRWõFMï3Û=1Ú6*Ü4'â6*à3,â70ä=5åE9âF9ÞB3ÞA2â>2Û0&ê72ì0/ï.1ñ.4ú7?ÿPXÿ]dÿZ_ÿOSá.1ã03à,-÷EEè66Ü,,Û-.ë>@Ü25Ù37ÿbhà=BË*2Ê-4Á&*Õ;=á@EÛ6:Ù37ß9=Ü7;Í/0Ì43Í;;ÕGFÞRSì`cõilôekê^aÄ@>ÆE@å^[øhgÿopÿjjåKK×=;É40Ñ>7×D<ÖC;Õ>5Õ<4Ø:1Ü41î5;ñ-7ð,6ò.8ï,4ë,3ó9<þJKß3/Ü3.Ú3+Ü3,ã5.ê40ï4/ò21ô02ö/2÷/1ö.0õ/.ð0-ê3-â7-Ù?3Æ8*´2%²8-ÃNGï|yÿ’‘ÿˆŒÿ‰ÿw…úl|øatûTnýHgÿ>bÿ:_ú6\óAaàNeÂWap/+_?0[W>^lIe}Mk‰St’\u–_v™_xžcy¡cx buŸ`uŸ`u_vž_wž_xŸ`{Ÿaz¡bz¢d{¥e|¦d|§`y§^y¨Z{ª\}¬^€¬a…¯g‡®m‡ªp…¥sƒ r{•nrŠjexe[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N:^L4_N4`N8^O:[N>YOEZSMZTT_ZahbprmzuŒ{u‘{q“zp“vp’qt“rxšt}¨w¶zƒÄ~†Ï„‰Ú‹ŒÞ–Ü™ŠÍ›…¶¢ƒ£ª„‘«~yŸl[šQ>¼MBÔQIâWRëWUñSRñKMí>Cå4:é9<æ9;à;9Ø=8Ó@8ÊB6ÀA0º?/³9,ºA6«5+£.$¾I?Ùg\ÙdZËUI¸<2¸6)À3)Î:0Ù;0Ú6,Þ3)ä6-ß1*ä71ã;2Ý9/Þ>0ãF5äB3ß9+ß1(é4-ð31ï-.í*.ô17ÿEJÿV[ÿ]bÿ\aâ9<ã9<Õ+,ôJKâ89×//Û57Ì()Ì'+øXZÝ>BÕ9=Ñ6:º#Ä(+Ü<>æAEÝ49Ù,2Þ17Ù05Í(.Ò37äKNöaeûhnùcl÷`iú`løbkÖLLÕNJê\ZêVTçMMãHFÏ42Î3/ÙA<àKDäOHßJCÙ@8×:3×6.Ü.-õ2:û-:ø*7õ'4õ)4ø0:ÿ>CÿJJà1.Þ3,Ü3,Ý5,á4-ç4/í4/ð3/ô02÷/2ù.1ø-0ö..ñ/-ë2-â7-Ù=1É;-³1$±7,ºC=ìyvÿÿˆÿ|ˆÿqöhxö_rùRlûDcÿ9^ÿ6]ú6\ðFcÑN`¢IMe5+VD0[Y@^lIe|NkˆRt‘[w•_x™`{ždz cvž`s›]rœ\s›\tœ]v^wž_{Ÿaz¡by¡bz¤b|§b{¦_x¦[x§Yz©Y{ªZ~ª_ƒ­e…¬k‡©m‰§s‰¥u„s|”ru‰pnlfwe_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<_N:aP6aP6aO9^O<[OA[RK\VV_Zakgvso†}z—‚~¡|¥}w£{u¥xv§sy©s}°x¸{„¿~†Ä„‰ÉŽÎ”“Íš“Ç •½«›µ¼¦²É­©Å¦”ªˆmœfJœE2¯A4¶@4ÂB9ÖHDèNNîJKì?Cë=?é;=ä<;ß=:Ù@8Ð@5È>1Á=0½:0¾?6¯4,§1'»I?ÑcVÖh[ÕeWÃOBº>2º4)Ç7,Ö90Ù5,ß2+ç60â0,ã4/â7/Þ7.à>1åC4ä>0Þ4%æ4*é0+ð3/ð..ï-.ò14ó78öBEöMRüY^éFKöQWØ37ëFJÝ8<æAEÚ7:Î.0Ñ05äHKÒ7;Ð7:¹#%Õ;=Û8;å;>ëÿ0=ú*7ü.:ÿ;EÿCHûABã1/ß4-Ý4-Ý5,â4-æ3,í4/ñ40ô02÷/2ù.1ø-0ö..ñ/-ë2-ã7-Ø:/Í>0µ1%±7,²;5ésqÿŠŠÿ‡ÿv†þi}óató[p÷PjúCbÿ7`ÿ7aù;_ìLf¿O[~86]=0NF1VX@ZeEcxMj…RrŽ[v”^yša{ždxžas›]p˜Yp™WqšXqšXt›\uœ]y_xŸ`x¡_y¢^z¥^y¤\x¤Yx¤Wy¥V{§X©_‚¬d„«h†¨l‡¥o†¢q€šmx‘jq…ij~cbv]_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<_N:cQ9cQ9aP<]P@ZPG\TR_Zaa_mtrŠyx˜€¨ƒ°~~°yy¯yu°wwµw|¾x€Á}…Ä‚ˆÄ…ŠÁ¿—–¾ ¼¬§»¶¬µ¾³±È¸«Ð¾¦ÖÁ¢Ñ»–Ьˆ¯oT®\G¤G5¨>0ÂG?àWQïWVñNOé@Cê=?æ<=â=;ß=:×=5Ñ:1É90Á80Á<5¹:3¸=5ÁOEÇXMÇ]OÑeXÓcUÂL>¼:-Å8.Ò91×4-ß2,ç60æ40á2-à5.ã<3çC7æC4â:-ß3%ê5,æ.&ð0-ï/,ð31ñ54ç-.â24çBF÷X]öW\ÿouåDJëHMà@Æ02Ö:=òHKî9>ð7?ø=Fò7Bè-8ô>Jÿ]gÿmwÿjrÿcn÷]gú^kÿaoÿ]nùYeò\]ãPIâJGÕ74Ò/0Ù54Ò0.Ø95ßD?ãJDâIAÙ@8Ó6/Ö4/Ü71è66ê'/ü0<þ2=÷+6ù0:ÿ>Eý?Aì44â3.à5.Þ6-ß4,á3*è3,ï4/ô41ö01÷/2ù.1ø-0ø..ò/-ë2-ã7-×9.Ñ?2¶0%²6,°61èpoÿ‡ˆÿ†Žÿp‚ücxñ\pôXn÷OiûBbÿ9aÿ`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`Q>dS?aP>]P@^QI[QPZSZeapsq‰yxšz|¥~€±€¹}ºxz·rs´lo¶twÈv{Ì€ƒÊ‹Æ–—䤾²°»¼¹´ËƳÓÌ°ÙϬÛϧÜÏ£ÝУÙ˜٘Ѩˆ¸€g ^FËzgÖue½H?×QN÷ccéKLå?Aâ89ä::â:9Ü75Ù61Ö;6Ë81À5.ÇB;»<3¿I?ÆXK¹OAÎdVÑcTÌXIÅG9Ä:/Í6-Ø7/á6/ã4/ß0-ß2,à70ä=4à<0Ý7)ß5(å7,ä/$ê/&ì/)î1-î20ë40è51â64×79æJNõY]íNS×8=×6<ùX`ÿ~„ÿ~†ÿouÿgoÿipÿflõ\añX[ûZ_ÿUZÿDKü8Bû7Aö2>î+9ì0>ñ=HÿS_ÿ`iÿgrÿepþbmÿcnÿ`oý]gíSSßF@Ö85Ö41×11×/.Ø31Û94áD=ÜB:Ù?7Ö<4×90Û81à93æ66ð7<ó4;ó4;ö4<õ6;ò59ë33ã1/Þ3,Þ5.ß7.à5+ä3+é2,ï2,õ20÷12ø03ú/2ù.1ù//ó0.ì3.å7.à?5Ì8,¿6,¯/&¸;7ÒXWÿ˜šþ{ƒÿm€ÿe|ø\rðPhôGeüCeÿ;dù9`õNlÓRd‰=?P, C;&CG.KM5Y_CZjEcxMqˆZx’bx–`t•\r–Yq˜Yl•Sm–Rn—So˜Tr™Xt›Zuœ]uœ[t›XtWv Xw¡Wv¢Wv¢Uu¡Tt S{¥[{£]zž^u—[m‹Ub~MXrCSj>AW0?U/`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVG_QF\OG^TSaZad`omkƒvw–wy¢{}®}¸x|¹quµkp´lo¶nq¾uvÐ|~Õ‰‰Ó˜˜Î¨§Ç¸¶ÁÉźÓαÛתâÛ¥çÞ¥æÝ¢äÛ¤âØ£ÛÑ ÔǛӼš»œ€©}dÅ‹wÊ}m´VJÒa[örpìZ[çKLã?@ç=>ë>@ç;;â66Û64Ö=8É83Ê?8¹6.¸>3½K@¶H;È]MÝo`Ô`QÆH:½5)Ä0&Ô6-Ü5-Û0)â51å95ä=7à<3Ü8.Û5)ß4*ã5*ì7.í5+í2+ë0+ç0,ã2,á4.Ý52Ö87Ø>@äJLóW[ú^bü\dþ]eÿaiôS[ïNVñQYÿ_gÿjqÿflõZ`óNTí4:ñ,5ô*6÷-9ñ'5å!-æ'6í7CþPZÿZdÿblÿdmÿenÿcmý[hõQZåEEÞ<7Û64Þ63ß55Ü30Ú2/Û62à>9Û>7Ø;4×:3Û81ß82å95ç:6é9;ê7:ë7:î79î79ì65å31ß2,Ü3,Ý6-ß7,â6,å2+ê1,ò1,õ20÷12÷03ú/2ù.1÷//ó0.ì3.å7.ß<3Ô=2Â8.¶1*·74ØZ[ÿ“ûs}ÿfzÿ^vùWo÷OiùFfû?bü^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^PCbUM\QM[QRcYbkdtqm„vu•y{¤y{¬y~¶x|»nsµei°`g¯jn¸ruÆ}}ׇ„Ý—”Û©§Ø»¹ÏËÊÈÜØ¿åá´éäªíè¦ðé¥íå¤çá§âÛ§×Ï¡ËÃœ¸¯©››ƒk¨ƒp§o`œRGº]UÝmi÷uuï__äJLå@DëADì>@è8:â66ß=:Ô;6ÔA:Â70·7,·>3®=/¶F8Ûj\ßi[Ù[MÊB6Å2(Ñ4+Ù6-Ù2,Þ52éA>ìGCà=6Õ2)Õ1'Ú2'Þ0%æ4*è1)ç.)æ/)ã2,â7/á=4àB9Æ-(Ê43ÜDCðVXú^b÷ZaóS[ñQ[èFQêHSïOYü\fÿmvÿntôY_ã>Dé.5ô-4û2<ü2>õ+9í'4ö6EÿKW÷ISõPWøW_þ^fÿckÿ`i÷RYéBIÞ97Þ71ã75é<8ë;;æ95á51Ý60Ý:3Ù;2×90×90Ü71á83ç:6é<8ã99ã99å97ç98è88æ74á40Û2+Ú6-Û7-Þ8,â6,ç2)ë0)ó0,÷10õ12õ13ø02÷/1÷//ò0.î3.ç6.Ý90ÜD9Ç80»4.µ/.ä_bÿƒˆølwþbxþWsúPmþLlÿCfö:]ó;_ìIfÔSgDJl;4O>,=<':?(ED/FH0Q\U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB\PDZOMZQVbXcjcsqm†vu•xz£z|­w|´sy·mr´bi¯]d¬ag±lr¾x{ʉ‰ß•‘夡䶵áÇÄÙÕÑÎáÝÄçä¹ëæ¯îê­îè¬éâ«ãÛªÚÓ©Ë¡»¶™¥¥›™„“ˆv˜q™rc›bW³i`Ïrmû‹‰õutê[]æLNèCGí@Dìô@?ï=;æ95à72Ý82Ú91Ù80Ù80Ü71ã73è96é:7â:7à;9ã:7æ:8ç:6å84à5.Ú3+Ú6,Û7-Þ8,â6,ç2)ë0)ò/+ö0/ô22ô23÷12ö01ö0/ò0.î3.ç6.Ü8/àF<É91¾3.¶,,îfjÿy€øgtÿbyýTqþKkÿGjÿ>cò6Yë=^ãQhÄXeˆBBgC7[N;GF1AC-JH3EE-LU6Sc>btLlƒUp‹XnRkPiŽKgIhJh‘Kj“Mk”Pm–To–Wp—Vt›Xs›Uq™So—Pj“MgJeŽHdG`‡D]AWy=Rq8Mi6Lf6Ne7Of8Lf7Oi9Sm>UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB^QIVMR_Xhnf{tp‰xt—xw¡xz«y{´sy·jr³`g­[c«_g°jr»v|Æ€„Γ•àžžä­®ç»½æËÉßÔÓØÝÛÎáßÆåá¾æâ¼äß¹à׶ÚеÎƱ¾µ¦­§›˜šŒŒŽ€‰…yŠ|q‘vk›si¨meºoi扄î~ósrñedñWYðMNîDEì@@ã:7à;7äB=ÞE?Ì<3Æ=3ÄB5¯1#®0"ÇI;ÜXKÖN@Ì=/Î8*Ð6*Ñ3*Ö42õUUÿkhú]XãD>Ü;3ß;2ã80â4-ã2,â1+Ý0)Ô0'Í/$Æ/$Â0#Å9,À4'Á3)Ë:5×CAÛEGÛBGÚ@HàDOëOZòVaòVaú^iÿgoóYaáBGê:<í57í38ï28ñ3=÷9CÿHSÿV_ä6?Ý4;ß6;ëADùJOüIMô;Aé13è51ë95ï<8ò<9ó;9ð:7é73â70ß;2Ü;1Û:0Ü90ß82ä73è64é75æ:8ä;8æ:8è:9è;7æ95á6/Ü3,Û7-Ü8.ß9-á7*å3)é1)ñ0)ô1-ó32ñ33ô22ô01ô1/ò0.î3.ç6.Þ7/àC:Ê70À1-À13÷jpÿqzúftû]túPmÿCfÿ=dÿ9cõ8^æEdÙZm«V[wE>dJ=aYFTO;KI4PI6GE.GP3L\8ZlFf|Nm…SmŠRlŒMhJfŽHgHg‘Ii’Lj“Ol•Sn•Vo–Ut™Vs˜Un•Rj’LfKcŒHaŠF_ˆFZBX|?St;Pn8Ok:Rl=Wn@ZqCUo?Vq>WqARE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEaVP^Vcje|yu}yšzy¡xy©vy°sw´jr³cj°[c«]e®hp¹v~LJшŒÓ™Ý£¥à¯³ã»¿åÆÇãÏÎÞÔÓØ×ÖÑÙ×ËÙÖÇ×ÑÅÒÉÀÌþŹ¹´¨¬£šŠ‹†x{tyvquleleogŽa[`[ÀsmØyuð{ü|yÿrpýccöSTðHGïC?ê>:á<6àA;Ñ:1ÓC:ÝTJÂ>2¸6)½9,Â=.È?/ÏB1×C5Ö@1Ñ7-Ð2/êLMú_]òWSßD?Ù:4Û81à70æ93ç92ç92â:1Ú9/Ñ9,Ê8+Ä8)°(¸3"È@2ÓI>ÒD@Ë;:Ì7;Ï:@Ñ7AâHRíV_ðYbõ^g÷`iêU[ÜAEå@>ì?;ñACúGJÿLTÿQYÿT]ÿV^á4:Ú/5Ü/3ç7:ô=Aø;?÷48ó12í42ï95ð86í42ë20ê20ç40á4.ã<4à=4ß<3Þ;2á83ä73è43è43è88ç98è88ë99ë97é75â5/Þ3,Û7-Ü8,Ý:+ß7*ã2(ç0(ï0(ò1,ñ42ð43ó32ó11ó1/ñ1.ì3.ç6.à91Ù<3Ì71Á0-Ñ@CÿnuýkuùbqðRiõHfÿ;aÿ4^ÿ6bû>däNiÊ\i‹GFjF:]L<]VCXQ>RJ7OG4ID.DJ.GU2Sc>^sHgMj‡OjŠKgŒGgŒFfŽGfHgJi’Nk”Rm”Um”Uq•Uo”Qj‘NgŽKcŒH`‰E_ˆF^†G\‚E[~DWxAVr?Uo@YpB]rG^uG[sCYtAXs@NB2QE5UI9WK;XL\P@^RBaUEbVFbVFaUE_SCaUEfZJh]YngwupŽ|x™{y wx¦vw­pu¯jo¯ah¬^f®_g°em¶pxÀ}…ؙ͉ؗ Ö¡¨Öª±Û´¹ßº¿ßÀÁÝÃÃÛÇÆØÆÃÔÅÁÐÁ»É¼³Ä»°Áµ¨¼¦˜¯–‹œˆ…Œqqqtpopfewhe†nj„_Y•d_›ZT¹f`Ùsnðzvÿ{wÿwsÿhfüZWþRNõHBæ=6çD=Ø;4ÛG=ê\RÅ;0Ä<0½7+¾6(Ç>.ÑD3ÔB3ÔA1×A3Ò86Ø>>ÝCCÜB@Ö=7Õ81Ø7/Þ7/å:3æ93å:3â;3Û>5ÕA5ÑE8ÌG6®-¼;%ÍJ8ÑL=Æ=5»0+À00Ê9>×AJáKTëU`ðZeð]eìYaßLRÔ>@Ï4/Ø7/à;9ê@@òCHõDJñBIî?Fâ5;ß26ã36ï8<õ79ø14û/2ü14ï20ð95ð74ì0.è,*ç0,æ3.à3,ä=5à=4à=4à<3ã:5æ95ê65ì65ì57ì57í57î68î66ë54ä2.Þ1+Þ7.Ý9-Ý:+ß7*á4&æ1&í1(ñ1,ð42î53ñ42ò21ó1/ñ1.ì3.ç6.â;3Ò4+Ò:5Æ20çUXÿpxùcnòZiçI`óEfÿ8bÿ/]ÿ5bÿBhÜLe±PYj5/^G7XK:UN;[P>VI8M@0JC0@F,AO.K[6Xj@bxGfJhˆIf‹FeŠDc‹BcEeŽHgLh‘Oi‘Rk’Sn’RlPhNd‹JaŠH_ˆF_‡H_‡H_…H_‚H]~G]yF]wH`wKcxOczN]uC[vAZu@JC3MF6QH9TK.ÑE6Ë>-Á2"Ê7'ÛE7ÞE?Ó97Ì3.Í50Ô;5×=5Ý<4á=4ä;4ä92Þ5.×4+Ï5)Ê8+Å<,Â?-ÔS>ÈG2½<)¾:-Ã=2Ä;5Â74Â43ÜKNÞMRáPUåTYèY]åVXÜMOÓD@É5+Ñ7+Ø7/Ý52â24å26æ18æ.6ì4>ì3;ó5?û9Bý4>ú+5ÿ(3ÿ/9ø-3ù57ù59ð./ë*+é0.è51â5/ã<4à=4à=4á=4ä;6ç:6ë76î66ì46ë35ì25í34í55ê41ã1-Û0(Þ8,Ý:+Ý:+Þ8(à4&ã3$é3&ì4*î50î52ð42ð3/ò2/ï2,ì4,ç6.ä=4Í/&×>9Ì35ùbgÿoy÷[iðNcêC]ùEhÿ:eÿ0]ÿ6aöGhÉJ]“CFR,#VI8SL:OH6[O?UI9F?-HF1>B'@J(IU1Sd:_rEe}Ig„JeˆHcˆCa‰BbŠCcEeŽHfMhPiQlPkMfJcŠIaˆG`‡F`‡H`†I^G^F_}G`|Ia{Kd{Mf|Nf~N]xC]z@^{CDB6FD8JF;PG>RH>WI>]M>_O?`Q>aR?`SB_VGbYRgb_ojnso~wq“zt |y¨yw©pp¦gg£`a¢\_¤`b­fhµopÀyzÌ„‚Ö‹ß–’眙栞ݡ¡×££Ù¤¤Ú¦£Ø¥¢×¥¡Ô¤ Ó¥žÑ£Í¢šÉ¢™ÈŸ–Ù»Ž‚°ƒ|žrn}igld^`fZZkYUrWP}WNŒWO•RI¨ZPµXPÁZSØkdìyrù‚|ÿ‹†ùuqÿusí_]ßPLÙEAïZTÌ71Å2*Ä6*Ã7(À7'Ã7&Æ9(Ê;+Ð<.Õ?1Ò8.Ö<2×?4Ó;0Í5(Í3'Ø:/â@5à90á90Þ7.×7+Ï7)É:*Æ?,ÄA/Â=.Æ@4ËE:ÍG<ÌC;Å<4»2,¶+&Ç<7ÐEBÙOLàVSãYVáXRØOIÐC:Ì;*Ó:(Ü8,â5.è./ì*2ð(3ô'6ú->ú+?û*?ý)?ÿ(?ÿ&?ÿ$<ÿ$<ÿ$8ÿ'9ÿ+<þ,9ó+5í.5è45ç;9Ý84Ý:3Þ;4à;5ã:5æ95é73ë54ë35ì46ë54é54ç53â5/Ý5,Û5)Ü8,Û9*Ü9(Þ9&ß8&â7%ã6%æ4&ì5-í4/ð50ñ4.ñ5,í5+ê5*å7,à90Ø7/Õ:6Û?BÿmwÿbsûSjõIcÿKjö6[ÿ6_ÿcçNj¯IV^$"D, ?:'HE4PMC/?G/BH&EK%KS.S]8[kDavKd~NdƒJb†F`ˆBa‰@c‹BeFhJlPm‘Ql‘LiŽHgŒGf‹HfŠJe‰Ic…HaƒGdƒJdIbGc~GdJdHe~Ga}C[{<\=_‚B=?4?A6FC[K>]M=`O;`Q<^SA^VIc[Xhcinlyso†tp•vpžtp¢pm¢gfŸaaŸ]^¡\\¤ed°kjºtrÅ}{φ‚Ù‰à”Žæ˜“å›–Ùœ˜Õ™Öžš×ž˜Ö—Õœ–Ô›•Ñž–Ñœ”Íœ“Ê›’ǚē‰»ˆ®‚xtk|mdif]^f[YiZSoWM{UJŠVKšVK°\RºYRÁXRÓfaàqjãvoí~wý‡…ÿ‡…÷usîgdãUSëZUÇ2,Â/%Å7)Ã7&À7%Á8&Ä8'È;*Ï;-Ó=/Õ9,Õ9,Ó:,Ò:,Ñ9+Ñ9+Ô8+Ø8,ß;1à90Ü8.Ö8,Ï9*È9(Á:&¾9&¾6*Á80Æ=5É@8ÊA9È?7Å<4Â91¿4-Ç>6ÑH@ØOGÚQI×NFÌC;Ã7*Ê7%Ó8$Ý7)å4,í//ô+3ù)7ý(:ÿ+@ÿ*Aÿ)Aÿ&Aÿ#@ÿ!<ÿ=ÿ:ÿ:ÿ 9ÿ%;ÿ);÷-9ð19ê7:å;;Ü94Ü:5Þ;4à;5ã:5æ95é73ë52ë35ì46ë54è64ä71ß6/Ü5,Ù5)Û9*Û9*Ü9(Ü9&Þ9&ß8%á8%ã6%ç5+ê3+ë4,ë5*ë5*ê6(ä7)á7*ß;1Õ4,Ó54óTYÿesÿ[põGbÿIhÿAdÿ;`ý3[ù;aòMmÍLb‰8?S*$A5'69(;<,B@1DA0@?-=B.>G,=CKP'\b_„?b‡B69.:<1??7DA:KB;OE/Ô>/Î6(Ë/"Ú:.Ú8-Ù7,Ö8,Ð:+É:)Â9&¾7$½5)À6,Â8.Ä:0Ç=3Ê@6ËA7ÌB8Ç:1Ê@6ÏE;ÐF<ÒH>ÑG=Ê@6Å7+Ì6%Ö6&ß7,ç4/ñ03ö-5û+9ÿ*<ü';ü'=û%=ù#;û!:ú7ü7þ6ÿ8ÿ6ÿ$8ý*;÷2<ñ6=ë8;ä::Ü94Ü:5Þ;4à;5å95ç85é73ë52í36î47í55ê65å61á6/Ü5,Ø4(Ú8)Ù9)Ú9'Û8%Ý8%Þ7$à7$á6%á5'â4)ã5*ã6(ã6(á7(Þ6)Û7+Ý<2Ð1+Ø88ÿkrÿ]nþPiñ<[ÿHlÿ7]ÿ>eù5[î>bæVqª?Qa#(L/);7+07'37&9<)@=*A<(@>)BB&?FXa4s~T€Œdw‡`hSa}La€G`ƒC`…?a‰@cŒ@hŽEjJkMl‘Nn“Mk‘HhHgŒGh‹Kh‹KfˆLd†Je„KdƒJc€FdGf‚Hf‚GeFb€Bc†DeŠEhH25*58-;<4A>7G@:KB;RE.Ñ>.Ë8(Ç/!Ò6)Ó5)Ò4(Ò6)Ñ9+Í<+È=*Ä;)Ä:-Ä:/Æ90Æ9/Ç:1È;1É<3Ë=3ÓD<ÓE;ÐA9Ë=3Ë<4ÏA7Ï@8Î;1Î5'Ù5)â5.ë31ò/5÷+6ù)7ü):ù&9÷&;÷&;ø'<û&<ý%:ÿ$:ÿ#:ÿ"7þ#7ú%7ù,;÷5>ò9?è8:à87Ü94Ü:5Þ;4à;5å95ç85é73ë54î47î47î66ê65æ72á6/Ü5,×5*Ø8*Ø8(Ø8(Ù8&Ú7&Ü7$Ý6$Ý6$Û5%Ü6(Ý7'Ü9(Ü9(Û:(Ù9)×:+×:1Ð3.ëHKÿoyÿVjøD_ø<_ÿAgÿ3\ÿ8bø>cèMlÅOe€0=J C1-11'.6'4=,=B.B@+B<$E>$HE$U\0p~MŸr—¨|ƒ˜mj„W_{J]~E_ƒCa†@bŠAfCkJl‘Lm’Om’Oo”Nl’IiŽIhHiŒLiŒLhŠNg‰Mf…LdƒJdGe‚HgƒHh„If‚Gd‚DgŠHiŽIl‘L-3'36+891<;6B=9G@:MD=QG=SI=SK>UNDZUQa^eigumklkŠjhb`XVˆPP†QQXYš`cªfj´orÁuxÉ|Ђ…Ö†‡Ù‡ˆØŠ‰Ù‹ŠÖ‹ŒÏ‹ŠÌŠ‰Í‰‡Ð‰…ш„ÑŠƒÑ‰‚ÐŒ„Ï‹„È…Á†º†°‡¥~w–m…„Yj€SZnVTc\RZaOZ_HeZDxUB’LD¸TRÐSWÛRYå^dèejãklæuqäunâoh÷~vÿ‚{ÿ‡~ôl`É?2Á8(À;(¿='¿='À<'Â;'Å:'Ç8(Í7)Ø:/Ù8.Ò8,Ï9+Ì:+É:*È9)É7(Ï9+Ñ7+Ò8,Ñ7+Ï7*Ì8*Ë<,Ë>-Ê<0É=0Ê<2É;/È:0Æ8,Å7-Å5*Ð@7Ð@5Í=4É9.Ë80Î;1Í:2Ì5,Ð/%Ù0)ä20ì25ô/8ù-9û+;ü,<ü-?û.?ü/@ü/@þ/Aÿ/?ÿ-?ÿ.@ÿ)9ü)8÷+7õ0:ñ6=í8=ã77Ü43Ü94Ü:5Þ;6â:7å95ç85ê65ì44ñ48ñ48ï56í76æ72á6/Ú6,×5*Ø8*Ö9(Ö9(Ø9&Ø9&Ù8&Ú7&Ù8&Õ8%Õ:&Ö;'Õ=(Ô=(Ô=*Ô=,Ô<.Ñ7/Ú;8ÿ^eÿaqÿPi÷<[ÿAiÿ4_ÿ4`û1YôKlÛYq•>NZ%-C),:2/-0)08+7@/:B+<<"A<UH(`[5{…S£lª¾‹¨¾Ž¥wo‹[aK^F`„DcˆBeDj“Go”Np•Po“So“So”Nl’IiŽIgŒGiŒLiŒLi‹OhŠNf…Je„IdƒHe„Ig…Ih†Hg…Ge…DiŽIi‘Kl”N+1%.4*470893>:7B=:HA;KD1Î8*È4&Ê8)Ë<,É:,È:,É;/É;-Ê:/È9+È5+Ç5(Ê6,Ï;/Ò>4Ó?3Ö?6Õ>3Î7.É,#Ò+%Ü-*ç02ð39ö1;ú0<ý0?ý0?ù0@÷1@÷1@ö0=÷/<÷-9ú,9ú*7ý/<ù/;õ0:ð3:í6;æ69ß55Ù42Ü94Ý:5ß:6â:7å95ç85ê65ì44ò59ò59ð67í76æ74ß6/Ú6-Ö6*Õ7+Ô8)Ô8)Ô9'Õ8'Õ8%×7'Ô9%Ð9$Î<%Ï=&Ï?'Î@(Î@*Ð?.Ò;0Ñ61ëHIÿfrÿOdÿHfû7[ÿAmý/]ÿ7aò4XãPj¼Ufm19E(*E697325406906=-3;#38CCja:…TŸ®w©Á‡µÎ—¯Ç“’®}v”be†Q`‚F`…BcˆBgFm–Jr˜Or—Rq•Up”To”Nl‘KhHf‹Fh‹KiŒLi‹Ni‹Og†Kf…Je„If…IhˆIi‰Hi‡Gf†CjJk“Mn–P(0#+1'/4-350764<85@=8C>8IEù4>ù1>ú0@ø/?ò.<ï/<í/9í07ï-5ï,2ò+2ñ*1õ2:õ3;ò5;ì59å57á55Þ65Ü75Ü86Ý97ß:6ã:7æ87é77ê67ì46ô5:ô5:ñ7:î87æ74à70Ú6-Ô6*Ó7*Ñ8*Ð8*Ð9(Ð9(Ð9&Ñ8(Ð9&Ë9"È:"È>$Ç?%È@(È@*Ì=-Ï;1×96üU\ÿ^qÿGcÿ?aÿ:aÿ7gþ3bû8`íFdÅNa‰@IS12A64@:<:46?56<7179+4="9CSZ.‚‚P¢§q±ÅŠ¯ËŽ°Ì’¦Ã’®}{™egˆQ_E^ƒ@c‰@iDo•Js™Ps˜Sq•Uo“Sn“NkJgŒGeŠEgŠJh‹Ki‹Ni‹NfˆKd†Id†IeˆHgŠJh‹Ii‰Hf‰Ej’Ll–No™Q&.!(0%-2+13.331764:95<;6GD=DD*¾;'¼7$À4#ÑB2ãOAäN@ØB4Ë7)Ë7)Ð>/Ê;+É:*Ç8(Æ7'È6'Ê6(Î8*Ð8+Ó;.Õ;/Õ9-Ò6*Õ7,Ú<1Ý<2Ü71è88ñ8=÷:Aû9Bú4Aõ/<ò,;ï,:í/;ê19ê38ë48í57ñ56ô36ó57ð37ï6;í9<é69â45Ý33ß76à;9Ý86Þ97á96ã:7æ87é77ê67ì46ô5:ô5:ñ7:ì89æ95ß82Ø7/Ó7+Ð8+Í:*Í9+Ì;*Í:*Í:(Í:*Ì;(Å9"Â:"Ã=$Â>%Ã?(Æ?+Ê<.Ï81ß<89?48E26C41=:)>E&FU*bs?›a­½±ËŒ«É‹¦Ã‹º„Ž¬z{™ef‡PZ|@^?a‡>hŽCo•Jr˜Or—Rp”Tn’Rn“NjIf‹Fd‰Df‰Ih‹Ki‹Ni‹NfˆKe‡Jd‡GeˆFgŠHh‹Gh‹GeŠDk“Lm—OpšR(0!'/"(-&).(.0-3317839:4==5?@8DE@JLKORYVXeZ\s]^}YX‚[Y‹^]–ee£nn¶wxÈØ„…⌌ðŠŠì†‡ä‚‚Ü€€Ö‚€Óƒ‚΀ƒÈ„ǃƒË„„ΆƒÐˆƒÓ‹„ÒŒ„ÏŠ€ÅŠ€¼‰€¯‡}Ÿ€xwozkegf]Xm[Qm[Mi\Lf^Kd_IeaHhaGo_FoP;…UA¥]O¿aYÑYXÝQTîS[ø\`ùheæYPÔD<Î70Ñ7/×:1Ö=/Ô;+Ï9(Í:&Ï9(Ñ:)Ô8)Ø8*Ü5,Ü5,Ð/%Í3)Ì8,Ê>/Å@/Á@-¾=*¼9'Â9)¾0"éWJßK?Ã/#Ñ=1Î2Ü<0Ù7,Ú8-â>4ìC<õBEò9?ð2<ö4?ö2@ñ-;í-:í2=ì7>æ5;ä68å78ë99ð:9ñ78ï77ò;=î<<ê::æ87á85ß74Ü75Ü75Þ97á98ã99æ::é9;ì9<í9<ï8<ô7;ó6:ð8:í9:ç;9à;5×90Ï7,Ê8+È9)Ç9+Æ:)Ç:)Ç:(È;*Ç<)Á9#Ä='¾:#¶4¼9%ÉD3Ï?6Ê1,ÿ^eÿVgÿIbÿ<\ø1X÷0Yû6cõBiçYo¬FQo33N3,B?6>C<@78@-1L/3K2.A9&DJ(Zn=~š_ž¸w¨Å‚¬ÊŒŸ¾‚˜¶€”²~‚ nf„RXvBY{?]€>c‡AiDn”Im•Ll”Nk’Ol‘NiŽIfŠDc†Bc†Bf‰Ih‹KfŠLdˆJg‹MhŒNg‹Kf‹HeŠEf‹EjIk“Jq›QržSt U*0")/#).').(-/,130561782;<4>?7AD=HJGOPTSUaXYkZ\u\Z^]‰db”kj¤utº~·‡ß‹Œéð‰‰ë…„ ؀~Ҁς‚Ì…†É†‡È‡ˆË‰ˆÎ‹ˆÏŒ†Î†ÌŽ…ÈŠ€¼‰±†|¡‚x‘{s€tknlb`e]Re`Me^Kf^Kh]Ki\Ij^Hk_Gn^Ew_G[C’YF­ZLÇVPÞRSõQXÿX_ðUSãLEÙ>9Õ60Ù6/Ü90Û9,Ö9(Ó8&Ñ8&Ñ8(Ô8)×7)Ü6*ß4,Ý5,Î0'É5)È9+Æ=-ÄA/Á@-¿<*¾9(Ä8)Ë<.äREÜH<È4(Ì:-È:,Â4&Ê=,Ë<+Ê;*Ê;*Ë:)Ì9)Î8)Ï6(Ó7*Ö8,Ù7,×3)Õ1'Ø1(Þ7.ç<5øDGñ8>í/9ï/:ð0=î.;ë1<ë6?ä5:Ü36Ø22ß:8îEBøIFøDCó?>é:7ç98å97â96á85à85á98á98à87â88å99ç9:é9;ì9<í9<î7;ó6:ò59î68ê88ä;8Ü:5Ó9/Ë7+Æ8*Ã:*Â:*À;*À;*Á<)Á<+Á<)½9$Á?)»:%³5¹:'Á;/Ê:2Ø<=ÿ^gÿPdÿA[ù8Wö6[õ;`ô>dãIe«?Lƒ?>_:2G;/:>08>2F<:R>=N0.S8/VK5ciEx[°pÂ}¡Æš¹}š¹€š¶ƒ©xrŽ^YuETp=\{B_@b†@iCm“Hl”Kk“LiMiMgŒGe‰Cc†Bc†DgŠJiŒLhŒNg‹MiOiMiŽKgŒGgŒFfŽEl’Im•LpœQoRt U-1"-1#,/&,.)//-11/34/45-9;0<>1@B7EHAKMLQRWUUaVWi\Yt^]fdŒpn zx·…ƒÎ‹ßêŽïŽŒíŠ‰ç‡„ßÓ|Ë}ȀƅLjˆÆŠŠÊŒŠÉŒŠÉŒˆÅŒ„¿‹‚·‰€­†|¡€v{p€ujpndbi_Vc]M_aL_aKc^Jg\Jl[In\Ho]Gq]EwaIxX?‡S=£VDÇXOãUSøOTþMSâ><Þ<7Ý84Þ71á6/á6.Ý7+Ú7(Ô7&Ó8$Ó8&Õ8'Ø6)Ý5*à3,Ý5,Ë3(Ä6(Â9)Á<+Â?-Â?-Á<+À8(Ã5'ÜJ=ÚF:ÕA5Îå84â62à72à72à72á85â96ä;8ä;8á77ä88æ8:è8;ë8<ë8<ë8<ì8;ï58î47ì57ç77â:7Ù:4Ï8/Ç7,Â8+¿:+½;+»<+»<+»<)»<+»<)¸9&½@*³9$±6$¶;+µ0'Ã40ìPTÿ[iÿJ`õ:Uð7Vñ@]ïHfçHdÍNa‚89e?6R@2DA09=,57)>6+K9/E-#R=,g]Bˆ_’«t—»{–Áz–¿{”³xœ¸…š´…€šm\uKHb5Nh8[xB_}?cƒ@hŒDl’Gj’Ih’JgLfKd‰Dd‡Cc†DeˆFh‹KkŽNkOjŽNiOiOiMhJgHh’Hl”Ko™Ms¡Vs£Wv¤Y24&04&01)01+12-23.34.46+9;-;>-?A3DF9IJDMONRQWSS]XVd\Zoda~nl”zw¬„‚ÃŒ‰Ö‘㔑ê“뎋≅قÌ|Ã|¿€~½„‚Á†…Á‰ˆÂŠÃ‹ˆ¿‰…¸‡®…}¤…{€vŽyn~rgmmaak^Vi[Pc\J]`K]aJc^Jh[JmZKqZJtZIv[FsWAxR;ŠQ=ªYFÍ[PãTPðFIñ>AÛ2/Ü5/á51ã60ã5.á5+à6)Û8)Ö7$Ó8$Ñ8&Ô9'Ø6)Ü6*à3,Ú6-È6)½8'¼7&½:(¿>+Â?-Ã;+Ä8)Æ4'éUIÓ<1Ì8,ÑB4¾5%À=+À=+À8(Ä8'Å9(Ç:)È9)Ë7)Ì6(Í3'Ò6*Ô3)Õ2)Û4,ã:3é>7ì?9ì=:è45ì59ï6;î5;ê2:æ39ä7=â<@óUVübbÿmjÿidóVQäA<ß63Ý4/ß61Þ71Þ71ß82á85â96å97æ:8å78æ89è8;é9<ë8<ë8<ë8<ì7<î5:î68ê67å97ß<7Ö<4Ì9/Å9,¾9*º;*¶;)µ<)µ<+´=)³;*³<(³:'·@,­8&­8'³;-«+"Ã54ý`gÿTdúG\ð-=@-@C.DG4IK>MNFQPNRRRVUSYX]a_lkius›€}²ˆ†ÇŒŠÓ•’ᔑâÜ‹‡Ó„Ä}º|µ|³~·„º‡„¹‰…·Š„²†¨z›€xs‡znzrfjm_^j[Ti[PjZKfZJb_Lb_Le^Li\Kn[Lr[Kw\K{ZG~UA†R=›RA¶VFÎRHÚG@â88å33Ý1-ß3/â5/ã5.á3,ß3)Ý5(Ü9(Ó8$Ð9$Ï:&Ñ:'Ô8)Ù7*Ý5,Ø7-Ä;+¹:)µ6%·8'½;+Â=.Ç;.Ç7,Ð90õ\TÖ=5É5+ÏA5¸3$·:(¼?+¿:)Ã:*Æ:+È:,Ê;-Ì:-Ï8-Ñ7-Ð3*Ò1)Ö1+Þ71å<7ê>:è;7æ74é75ï;<ðë8>è7=ê7;î7;î79ê7:ä::ß=:Ö=7Ë;2Ã;/º8*µ:*³;*¯<)¯<*¬<(¬;)¬;)ª;(¬=*¦8'§9*ª8-¬/)Ë@CÿhrôM^óH[íDYåH[ÙO^ÉT]·TWœXUdM?OL9LG4JE1FD-?B'=D#>H#KV.\g.==1==3==5;<4;=2;=/?B/@D-CG.FJ3KL:NOAQQIRRHYWJZZN_^\gerqn‰{y¡ƒ€·‡…Čьӊϊ…ǃº~y¯zw¦yv¥{v¬|y®€|®ƒ}©ƒ}£x—|t‹zrvksrffm_\j\Sk[NlZLl[Kk[Ki]Mg^Mi]Mj]Mn]Ms^Mz]MZI“`O›VG§N@¸J=Å@7Ï6.Ø1+Þ1+á51á6/â5.â4-à2)Þ4'Ü6&Ú;(Ñ9$Í;$Ì;&Î;'Ñ:)Õ9*Ù7,Ó9-Á>,´;(°5#²5#»9)Ä<.É;/Ë7-Ù?7ø[TãIAÎ:0Ì@3¸6&¬3 µ<)¼9'¿7'À7'Ã7(Å7)É7*Î7,Ñ7-Ù<3Û:2Þ93å<7ê>:ê=9ç85ã41è96ë<9ì::è8:ì>@øPPÿbcÿppùheâTPÊ=6À1+É40Ö;7ß=:à;7â;5á:2â94á83ã73ä73å55æ66é69é69ê7;ë8<ë8>ê7=è7=é6:ï8<ì89è8:ã;:Ý>:Ó>7É<2À8ÛTXûepîK\ïI]éJ\ÛM[ÉQZ´VV ZRŠ`RPI7HM9NI5H@+;567>O%Lf6lŠTw”\„›e‰šd›f£k”­t˜°|ƒ•mn}\Q`Cg{HiƒFl‹Gm‘Gj“Gf’GbGcŽGhJlMo’Pn“PlMiŽKjJj’Ls›TsUsSržQržOs¢Rw¦Uz«Zv¦Zu¥[s£YRK;RK;RJ=RJ=RJ=RJ=RJ=RK;UNXQ?YR@[TD\UE\UEb[HaZHaYLbYRe][kaiqftuj{zn„|pˆs‹s‰|p„uj{mbre]jc`k`_g_\c_Z^^ZY^YUaZRbZOe[Og[Ki\Kk\Ik\Gm]Fm]Fj^HicMqfTqZJuOB‹WJœ\P£YL¬ZL¥N=¦E4§<,±7(Â8-Ñ80Ü41Ý1-ß6/Þ7.Þ7.Þ7.Þ7.Û7+Ø6)×7)Õ8)Ô8)Ò9)Ò9)Ò9+Ò9+Ô8+Í;,½;+¶>-®9(©1 «2!·9*ÀÔH9Â=,·2#ÝPFØJ@ÔF<ÔD;ÚG?ÞG@àC>à<:à74æ87ì::ì::ç77â64à93Ü=7ÙF>ÏB9Ä:/¼4(·1&¹5)¿;/Ã?3Ã:0É<3Ò?7Ú?:â=;ç;9ì89í9:ç7:å8:å8:å99å97å97å95å95à40á51ä65å76æ89ç9:ç9:ç9;ë;>æ9;ß99Ü=:ÖA=ÍB;ÁA6·?1©:)£<+ =*›<(™:&–:%—8&‘8&A0‹<-‡/#‘/&¼LJämoçloÍVZ½LNµNOªQM¢UO›XO—]R•aTŠjSWZ/:M7FTa)~ŽP›°oŸ¼yœ½x’µs~ah€L\mCYdBT]BHP9?D0:=,@C2<@1:>0]sBgƒHpKo“Kl’Gj’Ii“KgJlPm‘So“Sl“Pm’Mk“Jm–Jm˜IqœLqžMrŸNr¡Pt£Rv§UyªYzª^y¦cm™ZbŽOWN?WN?WN?WN?WN?WN?WN?WN?XO@YPAYPA[RC\SD]TE^UF_VGd[JcZIcYMcYOf[Uj_]nbdpdhreltgpvirvirsfmm`gg[_bXY^[VZZRYVOWTKXTIXTH\VH^WGcZKcZIf[Ig\Hi]Gj^Fk_Gh`IcbMngTv\MSFšVM«VO°RJ·QE¯H9¬C0¬=,±9)¾8,Ë80Õ62Ù40Ý6.Ü8.Ü8.Ü8.Û7-Ú8-Ù7,×7+×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Î:,¾<.¶>.®9(¦1 §2 ²:)¹>.¾<.Æ:-Ç4*Ë4)Ò;0ÜE:áOBßQCÝOCÛF?Ø@;Ó<5Ò;4Ö=7Ú=8Ü86Ý33ç77ë78î79ë78ç77å97â=9ÛB:ÊA7¿?4¸:,±6'¯5&²8)¸=-¿@1ÅA4Í@6×@7ß=8ã:7é77ï56ñ7:é6:ç6<ç7:æ89æ87å95å95ã:5â92ã:3ã:5ä;6ä;8ä;8å99å99ä:;ã;;ß<=Ù?=ÐA;Ä?6·=2¬;-¥;+ =*œ=+—<)–;(’:&“8%Œ:%€9'€8)‰5*<5¿QP×eeÑ^a·MM¬NL¤TMYP˜\Q—^S—^S˜_VŒfQ`_/Sg*^r3zO™¯n¥¾|™²pˆ bj‚HauBTe;JX7FP7?H59?158-:^tEgƒHqMp”Ln’Hk”Hk“Lh‘Km‘Qn’Tm”Sm”Qk“Lk”Hl—Hm˜HpJpJp Ls¢Qu¦Tx©Xx©Xx¨^m—Xb‹QY‚H]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXGe]Je]Hd[Jd[Le[Qf[Uh]Yh][i]]j^^k__k__i^\f[YbWS_VQZVMWTKUQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`JhbLbaMngUy_PˆXN¢[U±VQ²IE¸E@¹@7¸>1·;/¸8+¼8+Ã9,É;/Ñ:/Ù8.Û7-Û7-Û9.Ú8-Ù7,Ù7,×7+×7+Õ7+Õ7+Ô8+Ô8+Ô8+Ò9+Í;,À>0¶>.­:(£2 £3ª:&³>,¹>.Ä?0Ä8+Å2(È4*Ð<0ØF9ÜM?âNDÙ:6Ø43Ô20Ö42Û97á=<æ<<é;<í9<î5:ë27é26è58å99á<:Ù@:¾8-µ:+±6'®4%­5%°8(µ<+»=.ÈD5ÏC6ÖB8Ü=7â94è64í55ï79ê69é69é69ç77ç77æ95å95å:3ã:3ä;4ä;6ã<6ã;8â:9á99Þ88Ý9:Ü<<Ú@>ÓB=È?9¹:1­7+¥7(¡;,<+™<+”;)“:(9&7%Š9&z6#y6%ˆ9, F=¹SOÀWT¸PO«IF¢MHœSL™YP—^S—aW—aW˜_V‹ePsrFzV“¦n¤¹€«À‡ž³{|[[oaXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Je]Hf^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh]Wh^Ug]Te[QdZPc[N]YMZVJVRFRNBPL@PM>TN@UO?WQAYTA[VC]XDaZGd]Jf_LfaMdcQleUv\OŠ[Q©b\¸ZX¶FD¹<:Ã<8Æ;6Ä:0Â8-½8)¼:*¾?.Ç?/Ó9-Ù7,Ú8-Ù9-Ú8-Ø8,Ø8,Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+Ô8+Ò9+Í;,Á?1¶>.¬9'¢3 3¢8"¬=)µ@.¼?-¿:+Ã7*Å5*Ë7+Î:.Îî7<ì38é06æ25å58á77Ú65Î61·5(¯7'®6&¬7&¬7&®9(²:)µ:*ÃA1ÊB4ÔA7Ü?8â;5æ95ë76î87í68ë78ë78ê86ê86è94ç:4æ;4â92á:2ß:4à;7Þ:8Ü:8Û97Ù99Ö<:Õ@<ÒC=ÊA;»;2¯6+¤6'ž7(œ;*˜;)”;)’;(:&8$Œ7#‡9%€=*v5#5'™E:ªPH¬MG©LG¦QLPJ˜UL”ZO”^R•aV•aV—aWgT‰…_™©x­½Ž¦¸ˆ¡ts†YN`8/A->3B%:F.=F3;A3:=2:=4<=599-?@2<>39<1<@29B/?L2PbNK:NK:NK:PMTQ@VS@XWC[ZF]\H^]Kb`Qf^QmWJ†[R¬ic¾c`ÁMMÈBCÐ;=Ô89Ó84Ì70Á9+º=)µC+¼B+Î;+×7)Ø8*×:+Ù9+Ö9*Ö9*Ô8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Í;,Á?1¶>0«:(¡6"š4›7 £=&¯B-³;*º;,Â:,Ç9-Ë8.Î:0Ð<0Ù:4é9<ì4<æ39ã28â38á48â38â25é6<é49ç4:ç7:ã9<Û76Ð21À0(´6(­:(­:(«:(«:(«:(¬9&¯7&¸:+Á;/Î>3Ø?7à=8ä;8è96ì87î66î66î66í74ê84è:3ç:3ä<3á:2ß;2ß<5Ü=7Û=:Ù><×=;Ô>=Ï@<ËB<ÅB:¹=5­7-£5(ž7(š:*–;)“<)‘;*:(Š9&‰8%ˆ7$ƒ8%ƒ@-u4"{3%“G:¤QI¡NFžNG¡WN˜UL’XLZN\N]R”`U—aWhW‰f˜¥z©€Žj]kHDS42@&$2-:&0;*5=.9?3?1;=28;0;?18A.>K1PbÜ87Ô70Ç;.¼?+±C*µA(Ê;*Ô7(Õ8)Õ9*Ö9*Õ9*Õ9*Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)Ò9)Í;,Á?1µ=/«<)¢9$™6•5›;"§A*²B.¹@/¿;,Ã7*Å2(Ë4+Ò;0ß=8ê5:î3<ë6=é8>ç:>ä;>ã:=â9<ß58á7:â9>á=>Û=>Ñ96Ã2/¶0'¯9+«>*«>*©>*ª=)©<(©:'«8%¯6%¹7)Å;0Ð=3Ù<5ß<7ä;8è;7î87ï75ï75î85ë:4é;4ç<4ä=4â>5à?7ÞA:ÚA;ÙA>ÕA?Ñ@=ÍB?Ã?:»@8³=3ª8-¡5(›5'˜8(•<*‘<(<)Š<(ˆ:&†9'„7%ƒ6$6%}:)t3!~9*—OA£YNœRG•OE˜VJ•YN[MŽZMŒ[MŽ\Q“_T™`W‘gW~xXyƒ^r|ZU`B;E,/;%0;*0<.3=24<16<2?1:<17:/:>07@-=J0Oa;bxIk‡Lu”Qu™Qt˜NqšNršSpšRršQsœPr›Op™Kn™Jp›LsžOv¡Ry¥X{§Zz¨]x¦]qŸWg”O]ŠEX‚B`‡NY€ISzCg^Og^Og^Og^Og^Og^Og^Og^Og^Og^Og^Oh_Ph_Ph_Ph_Pi`OjaPjbOjbOjbOi`Oi`OiaNiaNiaNh`Kh`Kh`Ih`IhaGhaGhaGf_Le^Kb[I\WDWR?PM:LI8IH6IH6GH6GJ9GK:HL;IMì;Aê@CæAEàBCÜ@AÙ??Í12Ð66Ó:<Ñ=;É;9¾71µ4.­4)ª<-¥>+¥>+¥@,¥>+¤>(¦;'©:'ª7%²7'¼8+Å8.Ì70Ô94Ü=9æ>;é:7ì95ì95ë:4é;4è;4å=4â>4àB7ÝC9ÚC<ÕB;ÏA=Ê?<Ç=;¿>9±<3©:/¢8+œ6(˜7'”8)‘:):(‹=)‰<*‡<)ƒ:'‚9(€7&6%}6$x3#x5%…B2˜UEWK”PCPD•ZL“YMZN\Q\Q’[T•\U˜[VŽbUkbEV`=JS4=G,6?*2=,4>35?66=68?8=B;CF=EG/;9*78*=>0:<17:/:>06?,=J0N`:awHk‡Lu”Qu™Qt˜Nr›OršSpšPq›OrNqœMp›LošKrNu¡Ty¥X«`~©az¥]qœUf‘L_‰G]‡E^ˆIb‰PY€ISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmdUlcTjaRi`Qh_Pg^Og^Mh`MiaNiaLiaLiaLh`Ih`IhaGh`IgaKf_Le^Kb[H\WDUR?PMSQDSPAXLÂYSÙROàDEà::Ü75Õ;3Ê>/º=)µ8"É:)Ï8'Ð9(Ò;*Ò;*Ò;*Ò;*Ò;*Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Í;,Á;0¶:.­<,§>+™9#3“7Ÿ?'£9#°;)À>0Æ<1Ì8.Ð7/Ù<5ã?=ì=Bî?DéCEâDCØ@?Ê;7À50»1.¹/,¼51¾:6»<6³:2ª8.¤8,¡:+¡=-Ÿ>+ ?,¡@-¡@-¡A+£>*¦=*©;*­:(²7(¹5)¿5+É90Ô?9àC>ä=7è;5è;5ç<4å<5ä=4á>5Þ@5ÜD9ØD:ÒC;ÊA9Ä?:¼;6¸85°93¢7-™8(•5'“6'‘:)<*‹:)…8&ˆ=*…<+ƒ<*€<)~:'|8%{6&{6&y1#€8*ŒG8–SC’PB‹L=RE™_S‘WL’YN”[R–]T–]V—\V–YTŒ^QaX;EM(6@8A&>G26BE*;:&78(=>09;069.:>06?,F7GK=IK=AE4KJ6\Q;aE/ƒJ9Àj]Üg`ãUSäFEåA@àA=Õ>5É=0Æ=-Æ4%Ë5&Ì6'Í7(Í7(Î8)Ñ;,Ó=.Ò<-Ò<-Ò<-Ò<-Ñ;,Ñ;,Ñ;,Î<-»2(¶7.±;/¨:)š7"”5•7œ9"®A-³;+º6)Á4*Í6/×<7âC?êHEèDEèEHÝCCÉ:6»61´80®8.©4+«9/©9.¤8. 8-›9,–:+“<+’<+–=+˜=*™>+š?,›@-A, A-£@-¢;*¥:(«7(°6)¶6+¾8-Ä;3Ì<4Ú=6à=6â?8âA7âA9ÞB6Ú@6×@5ØH=ÒE;ÇA8»;2²5/ª3-¦1*Ÿ2+™9-’;*‘9+:*‹:)ˆ;)‡;+…<+€9'}8(|9(|9(|9({8'y6&x3$w- ‹A4—OC“MAŽL@‘QE“UJŽRG˜\R˜\R‘UMTL—ZU•XS”WT“gZ]T5IQ*AK(BK,>H/7@+2=-4?14<1HPCZ^PW[JMO:DF.AA'==%:;)>?1;=2:=2;?14=*;H.PbF7>F7=E6@F8>E5>F1HL5MI0U?'Q:¼sbËcXà_ZëUTçGGâ@>àA=Ø?9Î:0Í9+Î=,Ï=.Ï>-Ï;-Î;+Í9+Í:*Î:,Ð:+Ð:,Ð:+Ð:,Ð:+Ð:,Í;.É?5ÅB:¼B7®=/Ÿ6#–1–1›2¨5#´6(Ã;/ÑA8ÞE?æIDéJFêKHÞCAÛEDÐB>¼<3¯9/©=0¥?1Ÿ=0Ÿ?1œ>2—>0”>/=/Š>.‡@.ˆ?,Ž=*‘;*’<+“=,”?+•>+—>,™>,Ÿ@.¡=-¤:,¨8,¬8+±8-¶:0¼9/Ê<2Ð<2Ó?5ÕA7×C9ÖC9ÔD9ÑE8ÊB6ÃA4¹=3°:0©6/¤5.Ÿ4,™7,’:.Œ=,Š;,ˆ;+†:*„;*ƒ<*<,~;*|;){9)y:)x9(w8'u6'w4$€4'D7˜NC‘K?ŒJ>QD’TIRG“SJ˜XO˜UO—VPœ]X”WRŽSOŠcT]W5Xc9_jBZfBIT66C)4@*0:<19<1<@25>+;H.PbMKD63Å?3ÅA4ÃA3ÁA4¶;,²:,ª8-£7+ž6+›6,˜7.”:/;/ˆ<,‡;-„;,‚:+€;+€;+<,};+z;*z;,w9*v8)u7(t6)v4&ˆ;1”F<–NBŽJ=ˆHEI0?C(=@#:<$89';<.8:/9<1=A36?,MK4Ñ>4Ò>4Ò>4Ó?5Ó?5Ó?5Ó>7Ó?;ÑB>ËD>ÆF=ÂF<ÃI>ÇM@ÎPDÙSHÝPGâMGäIEäGBâC?àA=ÛB=ÕFBÉD?º?7«=0Ÿ>.šC0•G3”I6F4ŒE3ˆC3…B1€A0}@.zA.|?-‚:,†8,…9+†:,†:,‡;-‡;+ˆ;+‰:+‹:)Ž8)8*•9,™;/=/¢<0ª:/­8.¯9/°:.°:.°:,¯9+®8*¨7)¥7(ž6)›6*•7+’8-‘9/Ž<0ˆ<.…<-ƒ;,9*:*~9*}:*};+|:,z;,y;,w9*s8*q6(r7)u5)ŒD8’H=‘K?ŠH:‡I<‹OD“TK—TL–QL›TP˜QO”SO–\X_Xh^—~j””p…’fu‚WYh?CR+?O*P`B)=A(;='78(:;-79.9<1=A37@-NKB1=I1?G/LG1S>+g=-•ZL­_Sœ>4ž3+¶?9ØXUóigödeëRUæJNèNPÙIAÓF<Í@6Ë>4Î@6ÒD:ÕG=×G>ÚJAÚJAÝJBÝJBÞKCÞKCàKDàKEëSRèTTãSRÜROØSLØSLÛULàUNàLHáIFãEBâC@äB@âC@äEBàFDÙJFÊE@¹>7¬=2¡?2˜B1’E3G4ŒE3ˆC3‡B3ƒ@0?1~?0z?/|>/€:.ƒ9.ƒ9.ƒ9.ƒ;-ƒ;-ƒ;-ƒ;-9*‚9*…9+‡:*‰:+;-<.“;/›;/ž9-Ÿ9- :,¡9,¢8+¢8*¢8*Ÿ8)œ8)˜8(”8)9*Œ:,‰:-‡;-„:-‚:,9+€8*}8)}7+|8+{9+z8,y9-x:-v8+q5*o5)q7+t9+ŒH;I<‰I=„I;…K?ŒRF“WM˜XO˜QMœUQ˜RP“VQ’`YˆbWƒg[†zdnrQZi@JY0AR(IZ0Wi?dvNj|VXiEL[:?L.:D)C-B47@-;H.L^8_uFi…Jt“Pt˜Pt˜Nr›Os›TpœQnMmžLp¡Pw¨Y|ªaz¨`rXi“QZƒA\„EaˆIeŒMgŽMgŽKhJfŠLc†PY{IRtBi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkaUlbYlbYlbYlbVlbVlcRlcRldQldQldQlcRlcTlbVlbXlbXlbXocUnbRkbQlcRlcRkbQg`Pd]M^WGYSCSM?MJ;KH9GE6EB3?B/;H.?H-OC-a=-ƒE:«XR´NJž,+²:9¹=;ÓSRòpnþvvñehëX^ð^_ãUQÚPFÔG@ÐC:ÑD=ÔG>ÖGAÖG?ÙHCÚJBÜHDÝJCÞJFÞKDàKGàKGâHHáGIÜHHÙGGÖHD×HDØGBÛFBàBAäABæBAèBBçCBäB@ßA>ÛA?ÛJGÊC?¹<6®>3¢@3˜A0A0C3ŠA2ˆ@1‡?1…=1‚<0€<1=1=1;1;1ƒ:3;1;1€.™9)–9(“:*:+Š;,‡;+„;,‚:+‚:,9+7)~6({5){5){5)z6)x6*x8,w9,s8*p4)o5)r:-v<0‹M@‰K<„J<‚M=…QC‹VH’XM—WN“NI™TO—VR•\Ue\{^PfVF`^GEO->N)?O(J\2_rEk~QexKXj@M_7@Q-6E&7D*=F1=D4:>07;-8:,:;-68-8;0>B47@-9F,I[5[qBeFr‘Ns—Os—Mr›Os›TpœQmœLo Os¤Ux¨\z¨`s [i“Q`ŠHYB^†GeŒMgŽMfJeGgŒGhŒLa„NXzHQsAi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkbSlbXlbVlbVlcRlcRldOldOldMldMldMldOldQlcRlcTlbVlbVocUmaSkbSlcTmdUlcTi`Qf_Ob[K^WGXQARLÐB>Í@9ÒC?ÒC=ÔC@ÕD?×CAØD@ÙECÚDCÝADÝADÞDFÝGHßIHàJIãIIåGHçACêADìBEìBEçAAâ@>Û=:Õ=:ÚFFÉ=<¹83°;2¦@4˜?1‘>0@1ŠG]/AV-7H$1@!6B*=F5PK8MH5ID1DC.@F*DD([B,ˆTG¯\X«>A¬/3ÎINÆ?EÀ;>»;<ÄFGØZ[ãefÛY[ÌGHÑJGÐEBÍB?ÐB>ÔFBÔFBÐB>É>7ÏD=ÏD=ÒD@ÔEAÖEBÙECÚDEÝDFÞ?Cß@DÞBEßEEáGGàFFàBCá>?èBDé@Cè>Aç=>ä>>ãA?áC@ßECÖBBÅ98¶50°;4¦?6š>3=/?2ˆ)=C5ã?>â@=â@=ÞC?ÓB?Å>:¶93ª70Ÿ:0—=2Ž>3†>2ƒ?2?3=2;3„93†93ˆ81ˆ92…;0„<.„<.ƒ;-;/€:.€:.€:.~:-~:-~:-~:-};/};/};/};/}90}90~80~8.€7.€7.€7.~8,€8,~8,}9,|8-{9-z8,x8,x8,x8.x8.w7-v8-v6,t6+s5*q5+m1'r6,n4)m3(o6+m4)q8-I=…SH…SJ†RGˆRH‹PHQJ”QK•RL“TMTK‰[N‚cQo_HYU:MV7O_;j~YbxQYoHUjCRg@Mb;IY5CR17D&4>#2:#6;'<>0@B5@@6<>358-39-4:.7:/9=/;?.=B,%Q?)kP=XG„NBˆE=“D?±WV¸TT»QQÀPOÀNMÁMMÂLJÃKJÐTTÈHGÂ=>Ä=:ÐB@ÓEAÏB;Ç>4ÊD9ÉE9ËF=ÍG>ÔFBØDDÜAEÝAEáBFáCDáCDâDEâDCáFDáFDáFDàEAßD@àB?ßA>àA=àA=àA=ÞC?ÔE?ÈC<º>6¬:0 90”:/Š<0‚<0€A2~@3~>4<3ƒ:3†91ˆ81‰90‡;.…<-„;,„;,ƒ;-‚:,‚:,‚:,9-9-9-9-~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/y9/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H>„RI…SLˆQJ‹PJQL”PM•QN”SOŠOG…SH€[K{ePsiPhkLfqQgxT^tMXnGPf?La:K_:K\:GV7CP4>2;=04:03;05;16<0:A,>D*Q[9^mDkRpŒRp“Sq™RsSsžVxŸ^|¢exžak‘T`†I]ƒF]ƒF\‚E`†Ia‡Jc‰Le‹NdŠMbˆK`†I^„I]LRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTnbTqdTo_Pm]Pm_RqeYog\ldYhbVfbWpl`{xi~{jyizubpiVe`JTT(MB.S@/U8(]7*l=3n70u91~;5‡@:’IB›PJ¥XP­ZR»^YºSN·GE¼B?ÈDBÑFCÓD@Ï@:ÐA;ÐC<ÒE>ÔG@ÖGCÚFFÛEFÞDFßCDßCDßCDßCDàDEßEEßECßECÞDBÞDBÜD?ÛC>ÜC=ÜC=ÜC=ÛC>ÖE@ÎE?ÃB<³>5¢:1”8-ˆ9,ƒ;-‚@2@1~>2=1ƒ:1†91‡81ˆ:0‡;.„;,„;,„;,‚:,‚:,€:.€:.9-9-~:/~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*j1&o6+m4)k2'l6*i3'm7+}G=‡PI‡PI‹PJŽQL‘RM’SN”UP‘VPŒWO‡[P~^OtbNoiQorUlwYfwUQeBK_:EY6DU3EV6GV9GT8ER8?I0*7;*:<.<>0;=/9;.6<25=26<26<0:0=@-=C)MW5Zi@f|MlˆNn‘Qq™RuŸUtŸWz¡`w`n”Wc‰L\‚E\‚E\‚EZ€C_…Ha‡JbˆKdŠMc‰La‡J_…H]ƒH[}JPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTnbTrdWoaTm_Rk_SkaWlcZle[jf]jf]xtiˆ„x‘•’Œ~‰‚r}zg`cNOT>DG2FE1HC0F=,L<,VC4P9+R6*V4*Y5)\6+a9/e=1m=1ŠKBSJ®UO¶NK¼FDÆABÒDCØFFÔ@>ÕA?ÖB>ÖE@ÙECÚFDÛEDÝEDÞDDßCDßCDÞDDÞDDÝEDÝEBÞFCÛFBÚEAÙD>ØE>×D<×D<ÙD=ØE>ÔD<ÓF?ÉF>ºA8§;1˜8,Œ9+…<-ƒ@0@1~?0=/ƒ:1„:/‡9/ˆ:.„:-„;,„;,ƒ:+‚:,‚:,9-9-9-9-~:/~:/~:/~:/~:/~:/}90|90}90{8/{8/{8/{8/x8.{;1y;0y;0y;0x:/x:/x:/v:/s7-s7-s7-r6,q5+o5*o5*m4)j1&o6+l3(h2&k5)h2&l6*|F<ŠOGŒOJPKRMSN‘VPWPŒZQ‰]R…aUy_PiZGd_IdhO\fKN]@EU8AQ4=M0G2:A/9=,9=.9=.8<-7;-7=36=56;46<2:<1;=/bxIj†Ln‘Qs›Tw¡Wx¢Z{¢ar˜[e‹N\‚EZ€C\‚E\‚EZ€C_…H`†Ia‡JbˆKa‡J`†I^„G]ƒHY{HNp>Eg5haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTrfXth\sg[mcYjaXle]snhzwp~w† ”¨¥œ«§œ¨¤™£‘™–‡z{kcfSOR?GJ7EH5BE2BE2EH5KL0A9,A7+@6*F4(S5*qB8ŒPHŸPK¯IG¿GIÌEIÓBEÖ@BÙ@BÚBAÛCBÚEAÚEAÜDAÜDAÞDDÞDFÞDFÞDFÞDDÝEDÝEDÚDCÚFB×FAÖF>ÔE=ÔE=ÓF=ÔE=ÕF>ÔA:ÓC;ÎE=ÁB9®>3ž9-‘;.Š.€=-;/„:-†:-‡;.„:-ƒ;-‚:,‚:,‚:,9+9-9-~:/~:/~:/~:/}:1}:1}:1}:1|91z:1|91y90y90x8/x8/v7.y:1y:1x90v:0v:0u9/u9/t:/r7/q6.q6.p5-o4,n3+n3+m4+j1(m7-j4*h2(j4*f2'j6+}D;NGNHQJTLUOŽWPŠYRƒ[Q{YMv\OkZJ]UBYXDY^HOYA?K3:H/7E.4B+5A+8D.=I3CL7EN9BK6?H5.5<,4:,5<45<56;56;49;0:-;@)GP1Ra:`vGi…Ko’RuVy£Yy£[xŸ`n‘W`ƒIZ}C[~D^G^G]€F`ƒIa„Jb…Kb…Ka„J`ƒI_‚H^IW|ILp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTkaUndZpf\lcZkd\rmg„|‘Œ§£ µ±®ÄÁ¼ÉÆÁÉľÅÀºÀ¹±¹²¨¤œˆ‚rfcTPQ?FI8>E3;D1:F28E38E38C2:B34(P:/e?6€EA¡PO¿X[ÊQVÊCIÕFJ×EFÚFFÛEDÝEBÞDBÝD?ÞCAÞDDÞDFÞDFÞDFÜDCÜDCÜDCÚDCÙEA×FAÕF@ÓF=ÒE<ÐF<ÑG=ÔE=Ô?8Õ@9ÐC:ÆC9¶A7¥=0–=/Œ=.†>/‚?/>.€=-<-ƒ;-„:-…;.‚:,‚:,‚:,‚:,9+:+9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.t8.w8/u9/u9/s9.t8.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*j4*h2(l6,i3)f2'h4)e1&i5*{B9ŽMG’MH‘PJTLVO‡XNYO|\Qs\Nk[L`WFVSBPSBJQ?@I64@,3<+2;*09(09(2;*5>-9B1G4:F2:C25@/3>-1<,3:33954954928919;.;>-;@*CL/O^7]sDi„Mp“SwŸYy£Yw¡Yq˜Yf‰OZ}CX{A\E]€F]€F^G`ƒI`ƒI`ƒI`ƒI`ƒI_‚H^G]€JV{HJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlbVj`VjaXkdZkg^upjˆ…€Ÿžš°°®ÃÂÀÓÒÐâáßçæäçãàãÞÚÞÖÓÙÎÈμ²¸¥——‡zym]_YIKL:@E1;D/>J6=H7=F5;C4;>5:;3983880==3C<2N71a84ˆHH¯]_Å`dÊWZÍQSÓNO×MKÛKJÞHGáFDãDAâBBßCDÞDFÞDFÝCEÝCEÜBDÜBBÛCBÚDCØD@ÕD?ÓF?ÒE<ÐF<ÐG=ÔE=Ù@:Ù@:ÑB:ÈC:¼C:¬@4™;/Œ9+‰=/ƒ>.>-€=,<,ƒ;,ƒ;,„<-‚:,‚:,‚:,9+9-9-~8.}9.~:/~:/}:1}:1}:1}:1}:1}:1z:1y:1x90x90w8/t8.s7-r8-t8.s9.r8-q8-r8-p7,p7,p7,o6-o6-n5,n5,m4+l3*k2)i3)g1'k7,h4)e1&h4)b0%f4)zA8MG’MH‘PJŽULˆXNYOxZOr\Nk^N^WGRPAKN=CJ:9B12:+08)17+17-06,/5+/5)08+2:+4<-9D4;F5=H7-.800621622717829;0:<.:?)?H+KY5[qChƒLq“Vwž[w¡YsœVgP^IUx@WzB[~F[~F[~F]€H_‚J_‚J_‚J_‚J^I^I]€H]€JUvIJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlbVpg^ng_lgatqj‡„¡ œ¼¼ºÎÐÏÏÏÏàààòòòúøùû÷ö÷óðñìéðâßèÐÆÝÁµÁ«¢‘}ub^\GKM7CH2AI2AI4@G5BD7AA7B=9C97?:69<5>?7B71J.+d66QR³giÆnmÀ\\ÇZWÐVS×QNÜLKâHHæCDåBCßCFÝDFÝDFÝCEÝCEÜBDÜBBÜBBÜDCÙCB×C?ÓD>ÒE>ÐF<ÐF<ÔE=ÜC=ÛA9ÒB:ÊD;¿E:°A6œ:-‹5&ŠD69A208+/7*6<247058157247025.06,08-19,6A3:E5=J9>K9-,6..400511606718:/:<.:?+WzB[~FY|DY|D\G_‚J_‚J^I^I^I]€H]€H]LStIHhA?]7icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSjcSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUldWibZgd]vsn“’Ž¯¯­ÄÆÅÚÜÛêîïóôöö÷ùüüþÿÿÿÿÿýÿûúü÷ôýòì÷áÔòØÇàʵƶŸª ‡ˆ„ibbFEH-DH/CG0FE1GD5F<3C60F42H:9>=9>?:B:7I75cGF’jjÅ“’è­©Ò‹‡ÇtnÀ]XÆSPÕONßJLçFKéFKßEGßIKÚDFÔ;>Ø>@áGIàDGÖ:=Ú@@Ú@@ÙA@ÖB>ÔC>ÑB<ÐA;ÑA9ÞC>ÛA9Ó@9ÊA9¾B8°@5Ÿ:.8*Œ=0‡>/ƒ>.>-€=,<+=*<,:+9-9-~8,~8.|8-|8-|8-|90|90|90|90z:1z:1z:1z:1y=5w<4w;3u:2t91q8/p7.p7.o6-m7-m7-l8-m7-l8-m7-m7-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)]-#`0&_/%b2(s>6ŒOJPKˆQJRJ}YMv_QfYITN>DE5>E5:C25@04&DR1WlCh‚Rs”]wž_r›Wk”R[~DXyDTu@Tu@WxCZ{F[|GZ{F^JbƒNbƒN^J\}H_€K`L^~MTsJFd@2I:3L95K<9?:7BA?MHE]RPyjg£Ž‹Î²®èÅ¿ÿ×Ñ쳪͂|Àc^ÊVVØRSßHMÚADÖDEÕEEØHHÜJKÛEFÕ<>Ö<>ÛACÙ??Ù??ÙA@×A@ÖB>ÓB=ÒA<Ó@9ÜA<Û@;Ó@9ËB:¿C;±A6 ;1’8-Œ=0‡>/ƒ>.>-€=,<+<,<,:+9-9-~8,}9.|8-|8-|8-|90|90|90|90z:1{;2{;2z;2w<4u<3u:2s:1r90n8.o6-m7-m7-l8-l8-l8-l8-j8-l8-l8-k6.n70o81n91l7/i4,g2*e3*c1(d4*_/%^.$b2(^.$`0&p>5JE‡RL‡XR~XOrVKdRDQJ:>?/:A16A05@03>04<14<15;17:379477577557246116//6./7,.9+1<.4A08E49H58G44E24B1.8/.5..3--2+23+46+8:-9=,7?(DQ3WlEh‚Ut•`wbp˜YgPY|DWxCTu@Tu@VwBYzEYzEYzE[|G_€K_€K\}H[|G^J^J^{MSnKF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVlfZed_y{x—™˜²¶·ÍÑÒäéìôùüúÿÿûÿÿüÿÿýþÿþþþÿþüÿÿûÿÿúÿÿôþüçúùÝïðÑáåÄÒØ´¼ÄŸ ¨ƒ‡‘l`gEQX7DG,DC.JD4LD7KA8I>:C;9SJKia_wvœ’¾³¯ÙÎÈêÜÓþèÝÿóéÿäÛð©£ÃecµBEÇDIÚRVÛUTÑMKÊDAÍCAÔFE×EFØDDÙCDÖ=?×>@Ø@?Ö@?ÖB@ÓB?ÓB=ÔA:Ù@:Ù@:ÒB:ËE<ÀD<²B7¡<2“9.Ž<0‰=0ƒ>/>.=-~<,€=-€=-9-9-~:/}9.}9.|8-{8/{8/}:1}:1{;2{;2{;2{;2z;4x<4t;2q;1r90o9/n8.l8-l6,k7,l8-j8-j8-j8-j8-i9-j8-j8-n91m80m80m80m80i7.f4+c1(d2)a1']-#_0&c4*\-#_0&sD<}PJVP~YQpTI^J?OC7?<-46(2;*0;+1<.2=/4<14<15;17:379479668357257227007/08-.9+0;-2?.6C27E48G48G49F54>33:2/4-,2(/0(13(57*6:)6>'DQ5YmJk„Zw—fwœfl“Z_‡KWxCWuCTr@Tr@VtBXvDYwEYwEZxF]{I_}K]{I]{I_}K^|JZwKPgJAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSjcSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVmg[jkfƒ‡ˆ£§¨¹¾ÁÐÕØåíïóûýõýÿûÿÿûÿÿüÿÿüþûýþùþýøÿþ÷ÿÿóøýæôýÞî÷ØæòÎÝéÃÎÚ´¶Á™¡«†€‡efmLMQ6FH0HJ5KI:HD9D@7OGDj`_‹€¤š™·¯¬ËÆÂÞÛÔêæÝúñèÿûñÿ÷íÿÝÕû¶±åŽÊcd°@?ÃPKÉTMÉPHÃF@ÈGBÔMJÖKHÐ@?Ò>>Ó??Õ?>ÕA?ÕA?ÓB?ÓB=ÓB=Ö>9Õ@:ÒC=ÌE?ÀE>²A9¢=5•;2Ž<1‰=0ƒ>/>.=/~<,€=-€=-9-9-~:/}9.}9.|8-{8/{8/~;2~;2|<3{;2{;2{;2z;4x<4r90o9/o9/m9.l8-k7,j6+h6+i7,i7,i7,h8,h8,h8,h8,h8,m;2l7/j5-i7.j8/j8/f4+a1'e5+a2(].$a2(b3)Y* a2(yNE\VvWRiNGWC:I<3@:.:;-8<.08)/:*3;.4Ð@?ÑA@ÒC?ÑC?ÑC?ÒC=Ó?;ÒA<ÐE@ÉE@½C>¯@9 >5•=3Ž<1‰<2ƒ=1=0=1~<.=/=/~:/~:/~:/}9.|90{8/{8/{8/|<3|<3|<3{;2z;4y:3y:3w;3n70m80l7/l7/k6.h6-h6-h6-i7.h8.h8.g8.g8.g8.g8.h8.k92h6/f4-g5.i70h70e4-b1*c2+b3+_0(]1(]1(V*!b6-{ULtYRaNHN?8A7.=6,;9-9;.9<139-3;.5;/6<06<07:/58-47.69049238139/39/2:/19.19,.9+.9+/:,0;-3>.6C2:E5Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGRlECU?6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSicSjcSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXng]lnmz‚…“š «µ·ÄÎÐÜæèí÷ùôþÿõþýöÿüúÿúûÿùûþóøúíõöèñôãôýêôýèôüåóùßòöÛéìÍØ×¹ÅÄ¥±°’ŽregOMP;GK:FM=GOBKQG{{sŸš”ž¸ØÎÌßÓÓçÛÛóëéü÷ôðïêüüôÿÿöÿýóÿùïÿóêÿçÞÿ×ËØ“ƒ¸eS£J:´TF½WIµF;·@8ÈKEÇC>ÊC?ÌB?ÎC@ÎC>ÎC>ÍD>ÍB=ÑB<ÒC?ÎDAÅD?¸A=ª=8ž;5•<4Ž;3‰<2ƒ=3=2=1~<0=1=/~:/~:/~:/}9.|90{8/{8/{8/|<3{;2{;2z:1y:3x92w81u91n70l7/l7/j8/i7.i7.h6-g7-g7-g7-f7-f7-f7-f7-f7-f7-h70h6/g5.g5.g6/h70g6/f5.a2*e6.^2)\0'`4+a5,i=4uSJXG@E>6<5/95,;8/8:/57,36+69.5;/7:/69.69.58-57,36+28,19,28.19,19.19,19,19,.9+.9+.9+/:,0;+3>.6A17B2ex\umt’lf‰_RwKBh9KkVsCZwG]zJ^{K_|L_|LVsCNg@ÉD=ÈC<ÉB<ÑC?ÐE@ÌEAÂC=³=9¦;5œ;5•<6Œ<3‡=4…<5=4<3~<0=1=1~:/~:/~:/}9.|90{8/{8/{8/{;2{;2y:3x92w81v70v70s7/n70j8/j8/j8/j8/h8.h8.h8.g7-f7-f7-f7-d8-d8-d8-f7-g6/h70i81i81h70i81j;3l=5g80k<4b6-a5,oC:xLCtI@nMDC9056.45/8918;247.14+25,58-58-57,46+46+46+46)37)/7(.9)08+.9).9+.9)08)08)19*08)08+/7*08+19,3;.4<-9B1:C0;B0:A1:<.68*24&/3$29'IU?cu[m„gf„bWyTInE?d8Hg;Li;Nk=Nk=Li;Li;Mj
    UrDYvH[xJ]zL^{M\yKQn@G_;6B4+4/#)%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSicSjcSjcSjbUlbVlbVmcWmdUmdUmdUleUmfVngWogZnh\oh^mjekormtzƒŠ¥®³ÃÌÑÕßáæîñôüþôýú÷ýùùþ÷úÿôüÿòüÿñüÿîýþðûøïþúñÿùïÿúíÿùéÿòßïàËÝηÁ²›¢—|ubb_NXZL]cWmwn|†}¦¬¢¾ÀµÚÕÏîäâüîîÿôôÿô÷þôõÿùùûúøûýøüÿúøÿõôüñ÷ýñÿÿñÿùèÿôãÿÌ»½p›QD©SFµSH²C:ÀJ@ÄH@ÇG>ÉF>ÈE=ÇD<ÆC;ÆC;ÍG>ÌG>ÇG>¼C;­>5Ÿ:2—:3‘>6Š=5†=4ƒ=5=4€<3;0;1;1~:/~:/~:1}90|90{8/{8/{8/z:1z:1x92w81v70u6/u6/q6.m80k90j8/j8/i9/i9/i9/h8.g7-f7-g7-f7-f7-f7-f7-f7-f5.j81m;4k:3j92j:0m>4oC8l@5oD;d<2c=2zVJ†dZyWMbLA>:13814927<54:0/5+25,9<336+25*24)03(13(25*46+47,.6),7)/7*-8*/7*/7*/7*/7*19,08+08-/7,/7,/7,08-08+7?09B14*00!''heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdVjdVjdXldYlcZmeZmeXmfVg`NjeRnkXol]he\feasqr‚†Š“–ž¡«³¶ÃÈËØÝàêîïö÷ùùûúüþýþþüÿÿúýþöúýòùüñúýòûþóùúòúúòùùíüúëþüçù÷ÞéåÊÕÔ¶º¹›˜˜|qtY_dMbkXr}l„‚‘›´¹²ËÌÇãâÞòîë÷óòû÷öýùøüø÷ÿþüþþüþþüýÿúýÿúýÿúýÿúýÿúúü÷ÿÿúÿûöÿêåا £`X›D=µNE¿MCÂF<ÄD9ÊE<ÎI@ÎKAËH@ÇG<ÆG8ÃH8½J8³H8¦E5šB4‘B5‹C5†B5„B6‚@4‚>3‚<2„:1†91†9191~:1|91{80z7/z7/w7.v6-w7.w7.w8/w8/v7.u6-q5+n3+l7/i81i81h70h70g6/g6/g6/f5.g6/i70i81h70g6/e4-e3,h3-j5/m80k90j:0i;.i=0kA3gB2jI:dH:v_O~k\ŠxjŒoRJ=79.4:04:039/39/39/28.28.17-17-36-06,25,/5+14+/5+/4-.5-/4-.5-/4-/4-/4-/4-05./4-/4-.3,.3,/4-/4-/6.1;23=26@58B79D67B45@03>-4?.DQ=WeN[kQPbHEX<@T8BW6Ic>Ke>Kf=Kf=JeOj?UpGYtK\vO]wP]wRWqNHb?;O6&1+&+.$),heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVidQjhSmjWjk[gg_lll~„“š¨¯µ¸ÂÄÑÖÙâçêòóõûüþÿþÿÿþÿþýûÿþúÿÿúþÿùûüôøûòöüò÷ýó÷úñøúïøúí÷úéùûåòõÚßâÃÌЯ´¸—‘–vkqUYaI_kUtoŒ˜Š§œ¿Á¼ÓÓÑççåóóñ÷÷õûûùüüúûûùþþüþþüþþüþþüþþüþþüþþüûÿþõÿÿõÿÿþÿÿÿûúÿíêð¿ºÂ~uŸKA¯M@¹K>ÂL@ÅK>ÃE9¼=4¾?6ÃE9ÄF7ÃJ7½L:³J7¦F6™C2‘C6E7…C7‚B8A7>5‚<4ƒ:3†91„93~92}:2z:1z:1y90x8/v7.v7.u6-v7.t8.t8.t8.r6,o5*m4+l7/i81j81h70i70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71k90k;1k;/j>1j@0iD2gH6kP=gRAufSueŒ…s†ƒrKL<69.39/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4./6/.80/:21=34@66B66B66B45B16C1CP>P]IR`IIW@AO6BP7EU:Jb@Jd?Ke@Ke>Ic6I5&1-',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVmhUkiTmjWjk[kkcwww‘’—§¬²¿ÆÌÒÜÞìñô÷üÿþÿÿþÿÿÿþÿÿþÿþýûÿþúÿÿúýþøúûóõøïñ÷ëñ÷ëô÷ìõùëöøêõøåõ÷áîîÔÛÛ¿ÉÊ«°±’“–yuy`kpZt{iˆŸ§œ®µ­ÍÏÊÞÞÜïïíøøöûûùþþüþþüýýûþþüþþüþþüþþüþþüþþüþþüýÿþûÿÿûÿÿÿÿÿÿûùÿúôÿ÷íýÑÆØž”L=¥RB©L;§@1·G;ÏYMÏUJ¼@4ÄD7ÆH:ÃK=¹I;ªB7?3—@7“E;‰@9„A9A8?6~>5}=4<4}=4z;4x<4w;3w;3u:2t91t91t91r90r90r90r90o9/n8.l6,k5+l7/j81l71j81k60i70i70h6/g5.g5.f5.g6/h70i81k:3k:3l;4j;3i:0h<1k?2jC4iD2fE2fI7lVAjYGujV†m‘Ž{€mEF658-28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4..5.+5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3DT9J_@Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8.A.&1-',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVniVljUlkWlm]pqi€‚ž¡¦¹¾ÄÄËÑÛåçõúýûÿÿüýÿüýÿþüýüûùÿþüÿÿûÿþùûüôõöîîñæéïãçíßíñâðôåñôãñôßòñÜêêÐØؼÇÇ«²±•¡¡‰‘“}“€œž‘ª­¢¶»´ÀÅ¿ÜÜÚééçööôûûùýýûÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþþûûýÿþÿÿþÿ÷òïüóìÿüóÿûíÿôäìñ¹p•P@¢O?¸XJ·M?µE9ÀG<ÁA6ÈE;ÅI?½G=¯@9¡<4š=6–A4e=1f>2hC3iE5fG3cG2cJ6hV@i\IskV…‚oŽzpq_9=,47,28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3--4-*4,)4,*6,+7-.:.1=14@25A36C2:G5N4DX¿@7ÆC;ÅF?¿D=±>;¦:7ž:8™>;‘=;Š?<„@=}@=xA6s>6r=5r=5r=5p>5o=4n>4m=3l<2k;1j;1i:0i:0j:0n72p62p62m61m61l71i70i70l;4k:3h91e90e90e90e:1d<2fB6cA5cC4dD5dG5dI6bI3_I2^L6eV?jbMrmW„ƒo„‡r[`L3:(28,28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,,3,,6.+5-*4+*4++5,.8-0;-2=/2=-5@/6A05A-1=)1=)5A-8F/=O5@T8FY=H\@J]?I^=K^>K`?TgG[pQcvZauZYkSJ]G6G4&4%$-*$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZlfVjgTkjUlnYorasvm…„Ÿ¤¨¸¿ÇÖßäí÷ùûÿÿûÿÿûüÿþÿÿÿþÿþýûÿÿûÿÿúüüôóõêëíâãçÙÝãÕÜãÑäéÓçìÕéíÖêìÔëëÓèæÏßÚÄÓθÓκÌƶËøÐÉÁ×ÒÎàÛØêæåðïíóòðùù÷ýýûýýûýýûÿÿýþþüüüúþþüþþüþþüþþüþþüþþüþþüÿýüÿûüÿøùÿþýþÿýùÿýôÿøïÿõ÷ÿöð÷çÿÿíÿîÛͧ”¤kX¢[GªWE­L;¹D:ÀD<ÀE>¼E?´A>ª=:¢:9š;9•=5o?5o?5o@6n?5m>4k<2h<1h<1h<1l<2o83q62p62p62m61l71j81i81h70g80e90e:1d<2e?4f@5dB6^B4aG8cL:dM;cM8`K6]K3]M4]Q9bX?mhRss[€ƒnv{eFO:4=*39-28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+,3,.5.,6.*4+*4+*4++5,-7,.9+-8*0;+4?/5@/4?.3?+3>-3@,7F/9K3@O8BT:GW¸J=¹I>¸I@´G@¯D>¥=:œ:7–=9>:ˆ?9€A:xA:tD:pF:pE5j>5n=6o83r73p62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5_C5ZE4_NnlUtv^|kcmU2>(6B.3;.39/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1++2+-4-+5-*4,*4,+5,+5,,6+-7,,6+/:,2=/6A17B27B15@04?.2?-4C.:G3=L5AO8DT:JX?L\BTbI\kTcqZ^mXUbPDRA2>0#/%&/,&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdVjdVjcYkdZlc\md[lfZlfVolYmlWjlWgkZflbr{xŽ˜š¨±¸ÊÓØãìñøýÿ÷üÿúûÿþÿÿÿþÿúùõÿÿúýýõøøîðòåéëÝåéØãêØåíÖæìÒéíÒêíÒèèÎèæÏèãÏáÚÈØÐÃØÎÄÝÒÌêßÛøíëÿôöÿõùÿõûÿùüþüýÿÿýÿÿýþþüþþüÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüÿþúÿýûÿýûýüúùýüøÿÿõÿÿóÿÿíýúóÿûûÿúÿÿôÿöæÿóßÿãÍ×­•©oY¨WD®Q@¬O>¯OA±OB­K@¤C<™<5•>7?6ˆ?8A7{B7uD6qE8qE8p?8q?8s>8q?8q?8q?8q?8p?8sB;qB:o@8m>6l=5j>5m>6o>7o83q73o83m82m82i81h91f:1f;2d>3d@4bB5`C5]A3\@2WB1TG4[S>f^Gi^HbX?ZS9ZS7\W:ZV;XW;kmUsw^u}fUaI&28D03;.4:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1++2+)3+*4,+5-+5,,6--7.-7,,6+.8-2<16A39D69D47B46A10;+2?-5B09F22=/x=/t?/sB3tD6r=5r=7t=8s>8u@:u@:t?9q?8sA:q@9q@9q@9p?8n?7o>7o>7k92m82l:3l;4l;4h<3g<3c=2c?3^>1dG9cG9T=-N9(M8'@1WQ;PN7KI0OK2]Y>ieJeaDVU7XX<]`CosZz€fdlU=I1-9#2>*4-1=)2>*9E/BN8IU?O[GVbN]hWYdTLWI/u@8s>8u>9u@:t?9o=6p>7sA:q?8p?8p?8n?7o>7m>6n=6m>6k<4l=5m>6k?6j?6gA6eA5bB5dG9[A2^G7^I8N=+F7$G8%>6!LL4GK2DG,DD*MM1\[?baC`aBYY=dgJsw^sy_X`I:D,/;%7C/6>16<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2*,3+.5--4,.5-07/4;39A6?F>BJ?;F8:E57B14?.3?+6B.)r>)s@+tD0vE4q?4n<3q<4tB9sA8o?5qA7xH>n>4m>4m>4k?4l=3j>3l=3j>3g?5gA6gA6gC7eC7cC6`C5^D5bK;UB1ZI7`S@RG3C;&E=(FA+AE,BH.AE*<@%?B%NN2_`AijKaaEnqTvzagmSJO94<%4=(=F38>28>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*).().().().().(*/)+0*,1+160/4.,1+,1+/4.6;4=BK:4.8/-4--4-,3,gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWkeWkeWlcZmd[md]mf\mg[jiWkmXimVjoYjs`hthm|wˆ˜˜¦³¹¿ÊÐÓÜãëðööûÿüýÿýÿþÿÿýÿþùþþöýýñúûí÷úçô÷âîóÜåíÕâèÎÛàÀ×Ú»ÖÖ¼Ù×ÂÝ×ÇÞ×ÍåÛÙìààøìðûðöÿõûÿùþÿúýÿûûÿûûÿýüÿþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýÿüøÿþøÿþûÿþþþþÿüþÿúÿÿùÿÿøþÿúýÿùüÿùùÿýúÿÿøÿÿøûÿõüþðÿÿíÿüéÿñßÿðÝÿïÚñÒ½´z{R>tJ4uH3vI4zM8}P;yL7nA.e7'{M@sD:qB8sD:oC8g;0d8-g=1i?3i?3i?3g?3f>2f>2f>2e?2b@4bB5`C5_C5_C5[D4ZE4WD3XI6OB/\T?oiSc^HMK4IG0IK3>D*?H-@F*48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0*+0**/)*/)+0*,1+-2,-2,05/.3-+0*+0*-2.2718=9;B:@K=@M;@M;=J68E13@,1?(0>'4.:0,6..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWkeWldWlcZmd[md]mf\mg[jiWkmXinWiqZgs_drejyt…••£²·½ÈÎÒÛâêïõôùýûüÿýÿþÿÿýÿÿúÿÿøÿÿóþÿñûþë÷úåðõÞæîÖâèÌÙÜ¿ÕÕ¹ÒйÔѾÚÔÈàÙÑêàßôéíþóùÿ÷üÿûÿÿýÿÿþÿÿþüÿþúÿþúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýÿþúÿÿúÿÿûÿÿþþþÿýþÿüüÿûüÿûúÿúøÿù÷ÿú÷ÿýøÿÿûÿÿûýÿúýþùùôîÿþöÿýôÿüóÿûîÿ÷çûæÕéÒÀÏ´¡¶š…”uawVCjI6lI6rM;uP>mF7iB3gB2jE5nI9nJ:oK;oK;eA1cB1cB1cB1cB1cB1bC1`C3]F6\G6\G6ZG6ZG6WH5TG4RG3PH3NH2fdM~~frrZVX@JL4GM3A.:>-;>39?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.210513764;4;G9=L9@O<@O:8F71?2-9-,6--4,,3+fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWldWldWlcZmd[md]mf\mg[jiWkmXinWiqZgs_bpcgxr‚””£²·ÀËÑÔÝäëðöõúþûüÿýÿþÿÿýÿÿúÿÿøÿÿôÿÿóÿÿïúýèò÷àçðÕâèÌ×Ú½ÑѵÍË´Î˺ÖÏÅÞ×Ñìâã÷îóÿöþÿúÿÿýÿÿþÿÿÿýþÿúþÿùþÿúþÿúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþþýþÿýþÿýþÿýÿþýÿüþÿúþÿùÿÿ÷ýýóýýõþýøþýùÿþüþþþÿýÿÿþÿþùÿÿüÿÿûüûöóÿøòÿýôÿþñÿýíÿúéÿòà÷äÓçÒ¿Ò»©¹ŸŽŸ„srb|]K}^LtUCaD2W:(Y<*[>,X=*`E2`E2`E2_F2`G3`G3`G3]H3\K7\M:\M:YL9XM9UM8RL6QL6NL5QQ9ikS|€gmq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bbFccIZZ@[Y@\ZA][B][B[Y@XV=US:SQ8HF1GD1DA0A?0@>1>>2??5>@5;>59?59?59A69A48C58C58C5:B79A69@88@58?79A69@8:B7:A9:B79@8:B7;B:E=8B:8B:7A88@56>14O<>P::L6@R8EW=FY=DX=@T;5H2+<),6+,3++2*ZgM[hN\hP]iQbjSckTglXhkXghVghVifWifWkeWlfXmeZmgYmgYkhYkg[kg\jf]jf[hfZefVhiWglVfo\erajwnzŠ‰œ«²ºÈÑÐÙàáéìò÷ûøþþùþúúÿøûþóùýïøùë÷øæõôâíìØéæÓåâÏÜ×ÄÒ˹ʿ­Á´¤¹­¡¼¯¦Á¶²ËÁÀÛÐÖæßæûóþý÷ÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿþüÿýúÿüùÿüùÿýúÿýùÿþúÿþýÿýüÿüýÿýþÿþÿÿþÿÿýþýûüÿþýÿþûÿüúÿøóøíçòåÝöèßûðêÿúýÿüÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿýþÿÿýÿÿþüÿþõÿÿîÿþèÿÿäúöÝýûâäàÇ‹‡lRM0SN0QK+QK+UO/UO/TO1TO1SO2SO2QP4QP4QM2PO3PN5NQ6MO7JP6HM6EM5HQ6EN1BK.?I'BI(FM+JP,KQ-NR/PT1VZ7^bA_bCY\?TWWU>XV=YW>XV=XW;WV:XT9QK3OI3LG4ID1DA2B@3A?3>@5<=59?59?59A67B48C57D37D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C874>63=40>-3C)9M*BY/Ga1Op;Ln;Li=Fa>BY?F;J@?I>>I9?G8>F7>D8=B;>E>9C;6@74B19I/BV3Pg=XrB^J[}JXuIMhECZ@9O:6G54E2XR6:@6:@69A67B47B46C26C2;C8:B79A69A69A69A6:B7;C8;C8:B7:B7;C8;C8=E:>F;=G<=G?>H=>I9?G8>F7>D8=B;=D=9C;6@74B19I/DX5Ri?[uEZ{FWyFTqEIdA=T:2H3/@.->+6H2@R8L_CReGSgKOcG@W=6I30:/07/-4,YgMZhN\hP^jRblTemVinZjo[mn\lm[mk\mj[nhZnhZoi]oi[liZkhYjfZieZie\ieZig[ghXghVchRajWerao|s{‹ŠŸ¦¢°¹ÁËÔÔÝäéñôòúüôúøñöðíðçèìÞâãÕÚÛÉÒÑ¿ÌɶÉıþ«¿¸¦¼³¢Ê¾®ÓŸÜÐÄæÙÑíâàöìíÿôúÿùÿÿ÷ÿÿúÿÿüÿþýÿýüÿûüþüþýþÿÿþþþþþþþþþþþþþþþþþþÿþüÿþüþýûþýûÿýúÿýúÿýúÿûøÿúöþùõÿýüÿûúýùúþúûþüýÿýþÿþÿÿýþÿüûÿýúÿüúÿøó÷ìæòåÝøêáÿôîÿúýÿüÿÿýþÿÿýÿÿûýÿúýÿþüýÿüýÿýþÿÿþÿÿÿýÿþõÿýìÿûãþúßÿüæÿÿéçâÌŒˆoRL2TO2TM0UN1TN.UO/VQ3VQ3UQ4SO2ON2NM1PL1NM1NL3KN3LN6KQ7KP9JR:LU:IR5JS6OY7SZ9T[9]c?fnG‚’c’¦sŸ±›ª’¡zˆ”pr{\\bFLP7KM5LK6KI4LJ5PK5TN8VP:WQ;VP:SN;QL9LI:IG:GE9CE:=>6:@6:@69A67B47B46C26C2;C8;C8:B79A69A6:B7;C8;C8;C8;C8;C8;C8F;=G<=G?=G<=H8>F7=E6=C7=B;:A:7A95?64B19I/BV3Ne;Uo?Tu@RtAPmAE`=9P6-C.+<*+<)1C-image_width / (dstinfo->max_h_samp_factor * DCTSIZE); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - for (blk_y = 0; blk_y < compptr->height_in_blocks; - blk_y += compptr->v_samp_factor) { - buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { - ptr1 = buffer[offset_y][blk_x]; - ptr2 = buffer[offset_y][comp_width - blk_x - 1]; - /* this unrolled loop doesn't need to know which row it's on... */ - for (k = 0; k < DCTSIZE2; k += 2) { - temp1 = *ptr1; /* swap even column */ - temp2 = *ptr2; - *ptr1++ = temp2; - *ptr2++ = temp1; - temp1 = *ptr1; /* swap odd column with sign change */ - temp2 = *ptr2; - *ptr1++ = -temp2; - *ptr2++ = -temp1; - } - } - } - } - } -} - - -LOCAL(void) -do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Vertical flip */ -{ - JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; - int ci, i, j, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JBLOCKROW src_row_ptr, dst_row_ptr; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* We output into a separate array because we can't touch different - * rows of the source virtual array simultaneously. Otherwise, this - * is a pretty straightforward analog of horizontal flip. - * Within a DCT block, vertical mirroring is done by changing the signs - * of odd-numbered rows. - * Partial iMCUs at the bottom edge are copied verbatim. - */ - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_height = MCU_rows * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - if (dst_blk_y < comp_height) { - /* Row is within the mirrorable area. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } else { - /* Bottom-edge blocks will be copied verbatim. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - if (dst_blk_y < comp_height) { - /* Row is within the mirrorable area. */ - dst_row_ptr = dst_buffer[offset_y]; - src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[dst_blk_x]; - for (i = 0; i < DCTSIZE; i += 2) { - /* copy even row */ - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = *src_ptr++; - /* copy odd row with sign change */ - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = - *src_ptr++; - } - } - } else { - /* Just copy row verbatim. */ - jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y], - compptr->width_in_blocks); - } - } - } - } -} - - -LOCAL(void) -do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Transpose source into destination */ -{ - JDIMENSION dst_blk_x, dst_blk_y; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Transposing pixels within a block just requires transposing the - * DCT coefficients. - * Partial iMCUs at the edges require no special treatment; we simply - * process all the available DCT blocks for every component. - */ - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, - (JDIMENSION) compptr->h_samp_factor, FALSE); - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } -} - - -LOCAL(void) -do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* 90 degree rotation is equivalent to - * 1. Transposing the image; - * 2. Horizontal mirroring. - * These two steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Because of the horizontal mirror step, we can't process partial iMCUs - * at the (output) right edge properly. They just get transposed and - * not mirrored. - */ - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, - (JDIMENSION) compptr->h_samp_factor, FALSE); - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; - if (dst_blk_x < comp_width) { - /* Block is within the mirrorable area. */ - dst_ptr = dst_buffer[offset_y] - [comp_width - dst_blk_x - offset_x - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - i++; - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } else { - /* Edge blocks are transposed but not mirrored. */ - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } - } -} - - -LOCAL(void) -do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* 270 degree rotation is equivalent to - * 1. Horizontal mirroring; - * 2. Transposing the image. - * These two steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - /* Because of the horizontal mirror step, we can't process partial iMCUs - * at the (output) bottom edge properly. They just get transposed and - * not mirrored. - */ - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_height = MCU_rows * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, - (JDIMENSION) compptr->h_samp_factor, FALSE); - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - if (dst_blk_y < comp_height) { - /* Block is within the mirrorable area. */ - src_ptr = src_buffer[offset_x] - [comp_height - dst_blk_y - offset_y - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } - } else { - /* Edge blocks are transposed but not mirrored. */ - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } - } -} - - -LOCAL(void) -do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* 180 degree rotation is equivalent to - * 1. Vertical mirroring; - * 2. Horizontal mirroring. - * These two steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; - int ci, i, j, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JBLOCKROW src_row_ptr, dst_row_ptr; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - comp_height = MCU_rows * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - if (dst_blk_y < comp_height) { - /* Row is within the vertically mirrorable area. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], - comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } else { - /* Bottom-edge rows are only mirrored horizontally. */ - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, FALSE); - } - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - if (dst_blk_y < comp_height) { - /* Row is within the mirrorable area. */ - dst_row_ptr = dst_buffer[offset_y]; - src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; - /* Process the blocks that can be mirrored both ways. */ - for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[comp_width - dst_blk_x - 1]; - for (i = 0; i < DCTSIZE; i += 2) { - /* For even row, negate every odd column. */ - for (j = 0; j < DCTSIZE; j += 2) { - *dst_ptr++ = *src_ptr++; - *dst_ptr++ = - *src_ptr++; - } - /* For odd row, negate every even column. */ - for (j = 0; j < DCTSIZE; j += 2) { - *dst_ptr++ = - *src_ptr++; - *dst_ptr++ = *src_ptr++; - } - } - } - /* Any remaining right-edge blocks are only mirrored vertically. */ - for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[dst_blk_x]; - for (i = 0; i < DCTSIZE; i += 2) { - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = *src_ptr++; - for (j = 0; j < DCTSIZE; j++) - *dst_ptr++ = - *src_ptr++; - } - } - } else { - /* Remaining rows are just mirrored horizontally. */ - dst_row_ptr = dst_buffer[offset_y]; - src_row_ptr = src_buffer[offset_y]; - /* Process the blocks that can be mirrored. */ - for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[comp_width - dst_blk_x - 1]; - for (i = 0; i < DCTSIZE2; i += 2) { - *dst_ptr++ = *src_ptr++; - *dst_ptr++ = - *src_ptr++; - } - } - /* Any remaining right-edge blocks are only copied. */ - for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { - dst_ptr = dst_row_ptr[dst_blk_x]; - src_ptr = src_row_ptr[dst_blk_x]; - for (i = 0; i < DCTSIZE2; i++) - *dst_ptr++ = *src_ptr++; - } - } - } - } - } -} - - -LOCAL(void) -do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jvirt_barray_ptr *dst_coef_arrays) -/* Transverse transpose is equivalent to - * 1. 180 degree rotation; - * 2. Transposition; - * or - * 1. Horizontal mirroring; - * 2. Transposition; - * 3. Horizontal mirroring. - * These steps are merged into a single processing routine. - */ -{ - JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; - int ci, i, j, offset_x, offset_y; - JBLOCKARRAY src_buffer, dst_buffer; - JCOEFPTR src_ptr, dst_ptr; - jpeg_component_info *compptr; - - MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE); - MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE); - - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - comp_width = MCU_cols * compptr->h_samp_factor; - comp_height = MCU_rows * compptr->v_samp_factor; - for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; - dst_blk_y += compptr->v_samp_factor) { - dst_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, - (JDIMENSION) compptr->v_samp_factor, TRUE); - for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { - for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; - dst_blk_x += compptr->h_samp_factor) { - src_buffer = (*srcinfo->mem->access_virt_barray) - ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x, - (JDIMENSION) compptr->h_samp_factor, FALSE); - for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { - if (dst_blk_y < comp_height) { - src_ptr = src_buffer[offset_x] - [comp_height - dst_blk_y - offset_y - 1]; - if (dst_blk_x < comp_width) { - /* Block is within the mirrorable area. */ - dst_ptr = dst_buffer[offset_y] - [comp_width - dst_blk_x - offset_x - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - i++; - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } else { - /* Right-edge blocks are mirrored in y only */ - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) { - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - j++; - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } - } - } else { - src_ptr = src_buffer[offset_x][dst_blk_y + offset_y]; - if (dst_blk_x < comp_width) { - /* Bottom-edge blocks are mirrored in x only */ - dst_ptr = dst_buffer[offset_y] - [comp_width - dst_blk_x - offset_x - 1]; - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - i++; - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; - } - } else { - /* At lower right corner, just transpose, no mirroring */ - dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; - for (i = 0; i < DCTSIZE; i++) - for (j = 0; j < DCTSIZE; j++) - dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; - } - } - } - } - } - } - } -} - - -/* Request any required workspace. - * - * We allocate the workspace virtual arrays from the source decompression - * object, so that all the arrays (both the original data and the workspace) - * will be taken into account while making memory management decisions. - * Hence, this routine must be called after jpeg_read_header (which reads - * the image dimensions) and before jpeg_read_coefficients (which realizes - * the source's virtual arrays). - */ - -GLOBAL(void) -jtransform_request_workspace (j_decompress_ptr srcinfo, - jpeg_transform_info *info) -{ - jvirt_barray_ptr *coef_arrays = NULL; - jpeg_component_info *compptr; - int ci; - - if (info->force_grayscale && - srcinfo->jpeg_color_space == JCS_YCbCr && - srcinfo->num_components == 3) { - /* We'll only process the first component */ - info->num_components = 1; - } else { - /* Process all the components */ - info->num_components = srcinfo->num_components; - } - - switch (info->transform) { - case JXFORM_NONE: - case JXFORM_FLIP_H: - /* Don't need a workspace array */ - break; - case JXFORM_FLIP_V: - case JXFORM_ROT_180: - /* Need workspace arrays having same dimensions as source image. - * Note that we allocate arrays padded out to the next iMCU boundary, - * so that transform routines need not worry about missing edge blocks. - */ - coef_arrays = (jvirt_barray_ptr *) - (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, - SIZEOF(jvirt_barray_ptr) * info->num_components); - for (ci = 0; ci < info->num_components; ci++) { - compptr = srcinfo->comp_info + ci; - coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) - ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) compptr->v_samp_factor); - } - break; - case JXFORM_TRANSPOSE: - case JXFORM_TRANSVERSE: - case JXFORM_ROT_90: - case JXFORM_ROT_270: - /* Need workspace arrays having transposed dimensions. - * Note that we allocate arrays padded out to the next iMCU boundary, - * so that transform routines need not worry about missing edge blocks. - */ - coef_arrays = (jvirt_barray_ptr *) - (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, - SIZEOF(jvirt_barray_ptr) * info->num_components); - for (ci = 0; ci < info->num_components; ci++) { - compptr = srcinfo->comp_info + ci; - coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) - ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) jround_up((long) compptr->height_in_blocks, - (long) compptr->v_samp_factor), - (JDIMENSION) jround_up((long) compptr->width_in_blocks, - (long) compptr->h_samp_factor), - (JDIMENSION) compptr->h_samp_factor); - } - break; - } - info->workspace_coef_arrays = coef_arrays; -} - - -/* Transpose destination image parameters */ - -LOCAL(void) -transpose_critical_parameters (j_compress_ptr dstinfo) -{ - int tblno, i, j, ci, itemp; - jpeg_component_info *compptr; - JQUANT_TBL *qtblptr; - JDIMENSION dtemp; - UINT16 qtemp; - - /* Transpose basic image dimensions */ - dtemp = dstinfo->image_width; - dstinfo->image_width = dstinfo->image_height; - dstinfo->image_height = dtemp; - - /* Transpose sampling factors */ - for (ci = 0; ci < dstinfo->num_components; ci++) { - compptr = dstinfo->comp_info + ci; - itemp = compptr->h_samp_factor; - compptr->h_samp_factor = compptr->v_samp_factor; - compptr->v_samp_factor = itemp; - } - - /* Transpose quantization tables */ - for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { - qtblptr = dstinfo->quant_tbl_ptrs[tblno]; - if (qtblptr != NULL) { - for (i = 0; i < DCTSIZE; i++) { - for (j = 0; j < i; j++) { - qtemp = qtblptr->quantval[i*DCTSIZE+j]; - qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; - qtblptr->quantval[j*DCTSIZE+i] = qtemp; - } - } - } - } -} - - -/* Trim off any partial iMCUs on the indicated destination edge */ - -LOCAL(void) -trim_right_edge (j_compress_ptr dstinfo) -{ - int ci, max_h_samp_factor; - JDIMENSION MCU_cols; - - /* We have to compute max_h_samp_factor ourselves, - * because it hasn't been set yet in the destination - * (and we don't want to use the source's value). - */ - max_h_samp_factor = 1; - for (ci = 0; ci < dstinfo->num_components; ci++) { - int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor; - max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor); - } - MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE); - if (MCU_cols > 0) /* can't trim to 0 pixels */ - dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE); -} - -LOCAL(void) -trim_bottom_edge (j_compress_ptr dstinfo) -{ - int ci, max_v_samp_factor; - JDIMENSION MCU_rows; - - /* We have to compute max_v_samp_factor ourselves, - * because it hasn't been set yet in the destination - * (and we don't want to use the source's value). - */ - max_v_samp_factor = 1; - for (ci = 0; ci < dstinfo->num_components; ci++) { - int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor; - max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor); - } - MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE); - if (MCU_rows > 0) /* can't trim to 0 pixels */ - dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE); -} - - -/* Adjust output image parameters as needed. - * - * This must be called after jpeg_copy_critical_parameters() - * and before jpeg_write_coefficients(). - * - * The return value is the set of virtual coefficient arrays to be written - * (either the ones allocated by jtransform_request_workspace, or the - * original source data arrays). The caller will need to pass this value - * to jpeg_write_coefficients(). - */ - -GLOBAL(jvirt_barray_ptr *) -jtransform_adjust_parameters (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info) -{ - /* If force-to-grayscale is requested, adjust destination parameters */ - if (info->force_grayscale) { - /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed - * properly. Among other things, the target h_samp_factor & v_samp_factor - * will get set to 1, which typically won't match the source. - * In fact we do this even if the source is already grayscale; that - * provides an easy way of coercing a grayscale JPEG with funny sampling - * factors to the customary 1,1. (Some decoders fail on other factors.) - */ - if ((dstinfo->jpeg_color_space == JCS_YCbCr && - dstinfo->num_components == 3) || - (dstinfo->jpeg_color_space == JCS_GRAYSCALE && - dstinfo->num_components == 1)) { - /* We have to preserve the source's quantization table number. */ - int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; - jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); - dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; - } else { - /* Sorry, can't do it */ - ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); - } - } - - /* Correct the destination's image dimensions etc if necessary */ - switch (info->transform) { - case JXFORM_NONE: - /* Nothing to do */ - break; - case JXFORM_FLIP_H: - if (info->trim) - trim_right_edge(dstinfo); - break; - case JXFORM_FLIP_V: - if (info->trim) - trim_bottom_edge(dstinfo); - break; - case JXFORM_TRANSPOSE: - transpose_critical_parameters(dstinfo); - /* transpose does NOT have to trim anything */ - break; - case JXFORM_TRANSVERSE: - transpose_critical_parameters(dstinfo); - if (info->trim) { - trim_right_edge(dstinfo); - trim_bottom_edge(dstinfo); - } - break; - case JXFORM_ROT_90: - transpose_critical_parameters(dstinfo); - if (info->trim) - trim_right_edge(dstinfo); - break; - case JXFORM_ROT_180: - if (info->trim) { - trim_right_edge(dstinfo); - trim_bottom_edge(dstinfo); - } - break; - case JXFORM_ROT_270: - transpose_critical_parameters(dstinfo); - if (info->trim) - trim_bottom_edge(dstinfo); - break; - } - - /* Return the appropriate output data set */ - if (info->workspace_coef_arrays != NULL) - return info->workspace_coef_arrays; - return src_coef_arrays; -} - - -/* Execute the actual transformation, if any. - * - * This must be called *after* jpeg_write_coefficients, because it depends - * on jpeg_write_coefficients to have computed subsidiary values such as - * the per-component width and height fields in the destination object. - * - * Note that some transformations will modify the source data arrays! - */ - -GLOBAL(void) -jtransform_execute_transformation (j_decompress_ptr srcinfo, - j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info) -{ - jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; - - switch (info->transform) { - case JXFORM_NONE: - break; - case JXFORM_FLIP_H: - do_flip_h(srcinfo, dstinfo, src_coef_arrays); - break; - case JXFORM_FLIP_V: - do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_TRANSPOSE: - do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_TRANSVERSE: - do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_ROT_90: - do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_ROT_180: - do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); - break; - case JXFORM_ROT_270: - do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays); - break; - } -} - -#endif /* TRANSFORMS_SUPPORTED */ - - -/* Setup decompression object to save desired markers in memory. - * This must be called before jpeg_read_header() to have the desired effect. - */ - -GLOBAL(void) -jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) -{ -#ifdef SAVE_MARKERS_SUPPORTED - int m; - - /* Save comments except under NONE option */ - if (option != JCOPYOPT_NONE) { - jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); - } - /* Save all types of APPn markers iff ALL option */ - if (option == JCOPYOPT_ALL) { - for (m = 0; m < 16; m++) - jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); - } -#endif /* SAVE_MARKERS_SUPPORTED */ -} - -/* Copy markers saved in the given source object to the destination object. - * This should be called just after jpeg_start_compress() or - * jpeg_write_coefficients(). - * Note that those routines will have written the SOI, and also the - * JFIF APP0 or Adobe APP14 markers if selected. - */ - -GLOBAL(void) -jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JCOPY_OPTION option) -{ - jpeg_saved_marker_ptr marker; - - /* In the current implementation, we don't actually need to examine the - * option flag here; we just copy everything that got saved. - * But to avoid confusion, we do not output JFIF and Adobe APP14 markers - * if the encoder library already wrote one. - */ - for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { - if (dstinfo->write_JFIF_header && - marker->marker == JPEG_APP0 && - marker->data_length >= 5 && - GETJOCTET(marker->data[0]) == 0x4A && - GETJOCTET(marker->data[1]) == 0x46 && - GETJOCTET(marker->data[2]) == 0x49 && - GETJOCTET(marker->data[3]) == 0x46 && - GETJOCTET(marker->data[4]) == 0) - continue; /* reject duplicate JFIF */ - if (dstinfo->write_Adobe_marker && - marker->marker == JPEG_APP0+14 && - marker->data_length >= 5 && - GETJOCTET(marker->data[0]) == 0x41 && - GETJOCTET(marker->data[1]) == 0x64 && - GETJOCTET(marker->data[2]) == 0x6F && - GETJOCTET(marker->data[3]) == 0x62 && - GETJOCTET(marker->data[4]) == 0x65) - continue; /* reject duplicate Adobe */ -#ifdef NEED_FAR_POINTERS - /* We could use jpeg_write_marker if the data weren't FAR... */ - { - unsigned int i; - jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); - for (i = 0; i < marker->data_length; i++) - jpeg_write_m_byte(dstinfo, marker->data[i]); - } -#else - jpeg_write_marker(dstinfo, marker->marker, - marker->data, marker->data_length); -#endif - } -} diff --git a/libjpegtwrp/transupp.h b/libjpegtwrp/transupp.h deleted file mode 100644 index 5c2d32aff..000000000 --- a/libjpegtwrp/transupp.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * transupp.h - * - * Copyright (C) 1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains declarations for image transformation routines and - * other utility code used by the jpegtran sample application. These are - * NOT part of the core JPEG library. But we keep these routines separate - * from jpegtran.c to ease the task of maintaining jpegtran-like programs - * that have other user interfaces. - * - * NOTE: all the routines declared here have very specific requirements - * about when they are to be executed during the reading and writing of the - * source and destination files. See the comments in transupp.c, or see - * jpegtran.c for an example of correct usage. - */ - -/* If you happen not to want the image transform support, disable it here */ -#ifndef TRANSFORMS_SUPPORTED -#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ -#endif - -/* Short forms of external names for systems with brain-damaged linkers. */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jtransform_request_workspace jTrRequest -#define jtransform_adjust_parameters jTrAdjust -#define jtransform_execute_transformation jTrExec -#define jcopy_markers_setup jCMrkSetup -#define jcopy_markers_execute jCMrkExec -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* - * Codes for supported types of image transformations. - */ - -typedef enum { - JXFORM_NONE, /* no transformation */ - JXFORM_FLIP_H, /* horizontal flip */ - JXFORM_FLIP_V, /* vertical flip */ - JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ - JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ - JXFORM_ROT_90, /* 90-degree clockwise rotation */ - JXFORM_ROT_180, /* 180-degree rotation */ - JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ -} JXFORM_CODE; - -/* - * Although rotating and flipping data expressed as DCT coefficients is not - * hard, there is an asymmetry in the JPEG format specification for images - * whose dimensions aren't multiples of the iMCU size. The right and bottom - * image edges are padded out to the next iMCU boundary with junk data; but - * no padding is possible at the top and left edges. If we were to flip - * the whole image including the pad data, then pad garbage would become - * visible at the top and/or left, and real pixels would disappear into the - * pad margins --- perhaps permanently, since encoders & decoders may not - * bother to preserve DCT blocks that appear to be completely outside the - * nominal image area. So, we have to exclude any partial iMCUs from the - * basic transformation. - * - * Transpose is the only transformation that can handle partial iMCUs at the - * right and bottom edges completely cleanly. flip_h can flip partial iMCUs - * at the bottom, but leaves any partial iMCUs at the right edge untouched. - * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. - * The other transforms are defined as combinations of these basic transforms - * and process edge blocks in a way that preserves the equivalence. - * - * The "trim" option causes untransformable partial iMCUs to be dropped; - * this is not strictly lossless, but it usually gives the best-looking - * result for odd-size images. Note that when this option is active, - * the expected mathematical equivalences between the transforms may not hold. - * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim - * followed by -rot 180 -trim trims both edges.) - * - * We also offer a "force to grayscale" option, which simply discards the - * chrominance channels of a YCbCr image. This is lossless in the sense that - * the luminance channel is preserved exactly. It's not the same kind of - * thing as the rotate/flip transformations, but it's convenient to handle it - * as part of this package, mainly because the transformation routines have to - * be aware of the option to know how many components to work on. - */ - -typedef struct { - /* Options: set by caller */ - JXFORM_CODE transform; /* image transform operator */ - boolean trim; /* if TRUE, trim partial MCUs as needed */ - boolean force_grayscale; /* if TRUE, convert color image to grayscale */ - - /* Internal workspace: caller should not touch these */ - int num_components; /* # of components in workspace */ - jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ -} jpeg_transform_info; - - -#if TRANSFORMS_SUPPORTED - -/* Request any required workspace */ -EXTERN(void) jtransform_request_workspace - JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); -/* Adjust output image parameters */ -EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters - JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info)); -/* Execute the actual transformation, if any */ -EXTERN(void) jtransform_execute_transformation - JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - jvirt_barray_ptr *src_coef_arrays, - jpeg_transform_info *info)); - -#endif /* TRANSFORMS_SUPPORTED */ - - -/* - * Support for copying optional markers from source to destination file. - */ - -typedef enum { - JCOPYOPT_NONE, /* copy no optional markers */ - JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ - JCOPYOPT_ALL /* copy all optional markers */ -} JCOPY_OPTION; - -#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ - -/* Setup decompression object to save desired markers in memory */ -EXTERN(void) jcopy_markers_setup - JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); -/* Copy markers saved in the given source object to the destination object */ -EXTERN(void) jcopy_markers_execute - JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, - JCOPY_OPTION option)); diff --git a/libjpegtwrp/usage.doc b/libjpegtwrp/usage.doc deleted file mode 100644 index 8c4970af0..000000000 --- a/libjpegtwrp/usage.doc +++ /dev/null @@ -1,562 +0,0 @@ -USAGE instructions for the Independent JPEG Group's JPEG software -================================================================= - -This file describes usage of the JPEG conversion programs cjpeg and djpeg, -as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See -the other documentation files if you wish to use the JPEG library within -your own programs.) - -If you are on a Unix machine you may prefer to read the Unix-style manual -pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. - - -INTRODUCTION - -These programs implement JPEG image compression and decompression. JPEG -(pronounced "jay-peg") is a standardized compression method for full-color -and gray-scale images. JPEG is designed to handle "real-world" scenes, -for example scanned photographs. Cartoons, line drawings, and other -non-realistic images are not JPEG's strong suit; on that sort of material -you may get poor image quality and/or little compression. - -JPEG is lossy, meaning that the output image is not necessarily identical to -the input image. Hence you should not use JPEG if you have to have identical -output bits. However, on typical real-world images, very good compression -levels can be obtained with no visible change, and amazingly high compression -is possible if you can tolerate a low-quality image. You can trade off image -quality against file size by adjusting the compressor's "quality" setting. - - -GENERAL USAGE - -We provide two programs, cjpeg to compress an image file into JPEG format, -and djpeg to decompress a JPEG file back into a conventional image format. - -On Unix-like systems, you say: - cjpeg [switches] [imagefile] >jpegfile -or - djpeg [switches] [jpegfile] >imagefile -The programs read the specified input file, or standard input if none is -named. They always write to standard output (with trace/error messages to -standard error). These conventions are handy for piping images between -programs. - -On most non-Unix systems, you say: - cjpeg [switches] imagefile jpegfile -or - djpeg [switches] jpegfile imagefile -i.e., both the input and output files are named on the command line. This -style is a little more foolproof, and it loses no functionality if you don't -have pipes. (You can get this style on Unix too, if you prefer, by defining -TWO_FILE_COMMANDLINE when you compile the programs; see install.doc.) - -You can also say: - cjpeg [switches] -outfile jpegfile imagefile -or - djpeg [switches] -outfile imagefile jpegfile -This syntax works on all systems, so it is useful for scripts. - -The currently supported image file formats are: PPM (PBMPLUS color format), -PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit -format). (RLE is supported only if the URT library is available.) -cjpeg recognizes the input image format automatically, with the exception -of some Targa-format files. You have to tell djpeg which format to generate. - -JPEG files are in the defacto standard JFIF file format. There are other, -less widely used JPEG-based file formats, but we don't support them. - -All switch names may be abbreviated; for example, -grayscale may be written --gray or -gr. Most of the "basic" switches can be abbreviated to as little as -one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). -British spellings are also accepted (e.g., -greyscale), though for brevity -these are not mentioned below. - - -CJPEG DETAILS - -The basic command line switches for cjpeg are: - - -quality N Scale quantization tables to adjust image quality. - Quality is 0 (worst) to 100 (best); default is 75. - (See below for more info.) - - -grayscale Create monochrome JPEG file from color input. - Be sure to use this switch when compressing a grayscale - BMP file, because cjpeg isn't bright enough to notice - whether a BMP file uses only shades of gray. By - saying -grayscale, you'll get a smaller JPEG file that - takes less time to process. - - -optimize Perform optimization of entropy encoding parameters. - Without this, default encoding parameters are used. - -optimize usually makes the JPEG file a little smaller, - but cjpeg runs somewhat slower and needs much more - memory. Image quality and speed of decompression are - unaffected by -optimize. - - -progressive Create progressive JPEG file (see below). - - -targa Input file is Targa format. Targa files that contain - an "identification" field will not be automatically - recognized by cjpeg; for such files you must specify - -targa to make cjpeg treat the input as Targa format. - For most Targa files, you won't need this switch. - -The -quality switch lets you trade off compressed file size against quality of -the reconstructed image: the higher the quality setting, the larger the JPEG -file, and the closer the output image will be to the original input. Normally -you want to use the lowest quality setting (smallest file) that decompresses -into something visually indistinguishable from the original image. For this -purpose the quality setting should be between 50 and 95; the default of 75 is -often about right. If you see defects at -quality 75, then go up 5 or 10 -counts at a time until you are happy with the output image. (The optimal -setting will vary from one image to another.) - --quality 100 will generate a quantization table of all 1's, minimizing loss -in the quantization step (but there is still information loss in subsampling, -as well as roundoff error). This setting is mainly of interest for -experimental purposes. Quality values above about 95 are NOT recommended for -normal use; the compressed file size goes up dramatically for hardly any gain -in output image quality. - -In the other direction, quality values below 50 will produce very small files -of low image quality. Settings around 5 to 10 might be useful in preparing an -index of a large image library, for example. Try -quality 2 (or so) for some -amusing Cubist effects. (Note: quality values below about 25 generate 2-byte -quantization tables, which are considered optional in the JPEG standard. -cjpeg emits a warning message when you give such a quality value, because some -other JPEG programs may be unable to decode the resulting file. Use -baseline -if you need to ensure compatibility at low quality values.) - -The -progressive switch creates a "progressive JPEG" file. In this type of -JPEG file, the data is stored in multiple scans of increasing quality. If the -file is being transmitted over a slow communications link, the decoder can use -the first scan to display a low-quality image very quickly, and can then -improve the display with each subsequent scan. The final image is exactly -equivalent to a standard JPEG file of the same quality setting, and the total -file size is about the same --- often a little smaller. CAUTION: progressive -JPEG is not yet widely implemented, so many decoders will be unable to view a -progressive JPEG file at all. - -Switches for advanced users: - - -dct int Use integer DCT method (default). - -dct fast Use fast integer DCT (less accurate). - -dct float Use floating-point DCT method. - The float method is very slightly more accurate than - the int method, but is much slower unless your machine - has very fast floating-point hardware. Also note that - results of the floating-point method may vary slightly - across machines, while the integer methods should give - the same results everywhere. The fast integer method - is much less accurate than the other two. - - -restart N Emit a JPEG restart marker every N MCU rows, or every - N MCU blocks if "B" is attached to the number. - -restart 0 (the default) means no restart markers. - - -smooth N Smooth the input image to eliminate dithering noise. - N, ranging from 1 to 100, indicates the strength of - smoothing. 0 (the default) means no smoothing. - - -maxmemory N Set limit for amount of memory to use in processing - large images. Value is in thousands of bytes, or - millions of bytes if "M" is attached to the number. - For example, -max 4m selects 4000000 bytes. If more - space is needed, temporary files will be used. - - -verbose Enable debug printout. More -v's give more printout. - or -debug Also, version information is printed at startup. - -The -restart option inserts extra markers that allow a JPEG decoder to -resynchronize after a transmission error. Without restart markers, any damage -to a compressed file will usually ruin the image from the point of the error -to the end of the image; with restart markers, the damage is usually confined -to the portion of the image up to the next restart marker. Of course, the -restart markers occupy extra space. We recommend -restart 1 for images that -will be transmitted across unreliable networks such as Usenet. - -The -smooth option filters the input to eliminate fine-scale noise. This is -often useful when converting dithered images to JPEG: a moderate smoothing -factor of 10 to 50 gets rid of dithering patterns in the input file, resulting -in a smaller JPEG file and a better-looking image. Too large a smoothing -factor will visibly blur the image, however. - -Switches for wizards: - - -baseline Force baseline-compatible quantization tables to be - generated. This clamps quantization values to 8 bits - even at low quality settings. (This switch is poorly - named, since it does not ensure that the output is - actually baseline JPEG. For example, you can use - -baseline and -progressive together.) - - -qtables file Use the quantization tables given in the specified - text file. - - -qslots N[,...] Select which quantization table to use for each color - component. - - -sample HxV[,...] Set JPEG sampling factors for each color component. - - -scans file Use the scan script given in the specified text file. - -The "wizard" switches are intended for experimentation with JPEG. If you -don't know what you are doing, DON'T USE THEM. These switches are documented -further in the file wizard.doc. - - -DJPEG DETAILS - -The basic command line switches for djpeg are: - - -colors N Reduce image to at most N colors. This reduces the - or -quantize N number of colors used in the output image, so that it - can be displayed on a colormapped display or stored in - a colormapped file format. For example, if you have - an 8-bit display, you'd need to reduce to 256 or fewer - colors. (-colors is the recommended name, -quantize - is provided only for backwards compatibility.) - - -fast Select recommended processing options for fast, low - quality output. (The default options are chosen for - highest quality output.) Currently, this is equivalent - to "-dct fast -nosmooth -onepass -dither ordered". - - -grayscale Force gray-scale output even if JPEG file is color. - Useful for viewing on monochrome displays; also, - djpeg runs noticeably faster in this mode. - - -scale M/N Scale the output image by a factor M/N. Currently - the scale factor must be 1/1, 1/2, 1/4, or 1/8. - Scaling is handy if the image is larger than your - screen; also, djpeg runs much faster when scaling - down the output. - - -bmp Select BMP output format (Windows flavor). 8-bit - colormapped format is emitted if -colors or -grayscale - is specified, or if the JPEG file is gray-scale; - otherwise, 24-bit full-color format is emitted. - - -gif Select GIF output format. Since GIF does not support - more than 256 colors, -colors 256 is assumed (unless - you specify a smaller number of colors). If you - specify -fast, the default number of colors is 216. - - -os2 Select BMP output format (OS/2 1.x flavor). 8-bit - colormapped format is emitted if -colors or -grayscale - is specified, or if the JPEG file is gray-scale; - otherwise, 24-bit full-color format is emitted. - - -pnm Select PBMPLUS (PPM/PGM) output format (this is the - default format). PGM is emitted if the JPEG file is - gray-scale or if -grayscale is specified; otherwise - PPM is emitted. - - -rle Select RLE output format. (Requires URT library.) - - -targa Select Targa output format. Gray-scale format is - emitted if the JPEG file is gray-scale or if - -grayscale is specified; otherwise, colormapped format - is emitted if -colors is specified; otherwise, 24-bit - full-color format is emitted. - -Switches for advanced users: - - -dct int Use integer DCT method (default). - -dct fast Use fast integer DCT (less accurate). - -dct float Use floating-point DCT method. - The float method is very slightly more accurate than - the int method, but is much slower unless your machine - has very fast floating-point hardware. Also note that - results of the floating-point method may vary slightly - across machines, while the integer methods should give - the same results everywhere. The fast integer method - is much less accurate than the other two. - - -dither fs Use Floyd-Steinberg dithering in color quantization. - -dither ordered Use ordered dithering in color quantization. - -dither none Do not use dithering in color quantization. - By default, Floyd-Steinberg dithering is applied when - quantizing colors; this is slow but usually produces - the best results. Ordered dither is a compromise - between speed and quality; no dithering is fast but - usually looks awful. Note that these switches have - no effect unless color quantization is being done. - Ordered dither is only available in -onepass mode. - - -map FILE Quantize to the colors used in the specified image - file. This is useful for producing multiple files - with identical color maps, or for forcing a predefined - set of colors to be used. The FILE must be a GIF - or PPM file. This option overrides -colors and - -onepass. - - -nosmooth Use a faster, lower-quality upsampling routine. - - -onepass Use one-pass instead of two-pass color quantization. - The one-pass method is faster and needs less memory, - but it produces a lower-quality image. -onepass is - ignored unless you also say -colors N. Also, - the one-pass method is always used for gray-scale - output (the two-pass method is no improvement then). - - -maxmemory N Set limit for amount of memory to use in processing - large images. Value is in thousands of bytes, or - millions of bytes if "M" is attached to the number. - For example, -max 4m selects 4000000 bytes. If more - space is needed, temporary files will be used. - - -verbose Enable debug printout. More -v's give more printout. - or -debug Also, version information is printed at startup. - - -HINTS FOR CJPEG - -Color GIF files are not the ideal input for JPEG; JPEG is really intended for -compressing full-color (24-bit) images. In particular, don't try to convert -cartoons, line drawings, and other images that have only a few distinct -colors. GIF works great on these, JPEG does not. If you want to convert a -GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options -to get a satisfactory conversion. -smooth 10 or so is often helpful. - -Avoid running an image through a series of JPEG compression/decompression -cycles. Image quality loss will accumulate; after ten or so cycles the image -may be noticeably worse than it was after one cycle. It's best to use a -lossless format while manipulating an image, then convert to JPEG format when -you are ready to file the image away. - -The -optimize option to cjpeg is worth using when you are making a "final" -version for posting or archiving. It's also a win when you are using low -quality settings to make very small JPEG files; the percentage improvement -is often a lot more than it is on larger files. (At present, -optimize -mode is always selected when generating progressive JPEG files.) - -GIF input files are no longer supported, to avoid the Unisys LZW patent. -Use a Unisys-licensed program if you need to read a GIF file. (Conversion -of GIF files to JPEG is usually a bad idea anyway.) - - -HINTS FOR DJPEG - -To get a quick preview of an image, use the -grayscale and/or -scale switches. -"-grayscale -scale 1/8" is the fastest case. - -Several options are available that trade off image quality to gain speed. -"-fast" turns on the recommended settings. - -"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. -When producing a color-quantized image, "-onepass -dither ordered" is fast but -much lower quality than the default behavior. "-dither none" may give -acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. - -If you are fortunate enough to have very fast floating point hardware, -"-dct float" may be even faster than "-dct fast". But on most machines -"-dct float" is slower than "-dct int"; in this case it is not worth using, -because its theoretical accuracy advantage is too small to be significant -in practice. - -Two-pass color quantization requires a good deal of memory; on MS-DOS machines -it may run out of memory even with -maxmemory 0. In that case you can still -decompress, with some loss of image quality, by specifying -onepass for -one-pass quantization. - -To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These -are larger than they should be, but are readable by standard GIF decoders. - - -HINTS FOR BOTH PROGRAMS - -If more space is needed than will fit in the available main memory (as -determined by -maxmemory), temporary files will be used. (MS-DOS versions -will try to get extended or expanded memory first.) The temporary files are -often rather large: in typical cases they occupy three bytes per pixel, for -example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough -free disk space, leave out -progressive and -optimize (for cjpeg) or specify --onepass (for djpeg). - -On MS-DOS, the temporary files are created in the directory named by the TMP -or TEMP environment variable, or in the current directory if neither of those -exist. Amiga implementations put the temp files in the directory named by -JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free -space. - -The default memory usage limit (-maxmemory) is set when the software is -compiled. If you get an "insufficient memory" error, try specifying a smaller --maxmemory value, even -maxmemory 0 to use the absolute minimum space. You -may want to recompile with a smaller default value if this happens often. - -On machines that have "environment" variables, you can define the environment -variable JPEGMEM to set the default memory limit. The value is specified as -described for the -maxmemory switch. JPEGMEM overrides the default value -specified when the program was compiled, and itself is overridden by an -explicit -maxmemory switch. - -On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to -use. (Extended or expanded memory is also used if available.) Most -DOS-specific versions of this software do their own memory space estimation -and do not need you to specify -maxmemory. - - -JPEGTRAN - -jpegtran performs various useful transformations of JPEG files. -It can translate the coded representation from one variant of JPEG to another, -for example from baseline JPEG to progressive JPEG or vice versa. It can also -perform some rearrangements of the image data, for example turning an image -from landscape to portrait format by rotation. - -jpegtran works by rearranging the compressed data (DCT coefficients), without -ever fully decoding the image. Therefore, its transformations are lossless: -there is no image degradation at all, which would not be true if you used -djpeg followed by cjpeg to accomplish the same conversion. But by the same -token, jpegtran cannot perform lossy operations such as changing the image -quality. - -jpegtran uses a command line syntax similar to cjpeg or djpeg. -On Unix-like systems, you say: - jpegtran [switches] [inputfile] >outputfile -On most non-Unix systems, you say: - jpegtran [switches] inputfile outputfile -where both the input and output files are JPEG files. - -To specify the coded JPEG representation used in the output file, -jpegtran accepts a subset of the switches recognized by cjpeg: - -optimize Perform optimization of entropy encoding parameters. - -progressive Create progressive JPEG file. - -restart N Emit a JPEG restart marker every N MCU rows, or every - N MCU blocks if "B" is attached to the number. - -scans file Use the scan script given in the specified text file. -See the previous discussion of cjpeg for more details about these switches. -If you specify none of these switches, you get a plain baseline-JPEG output -file. The quality setting and so forth are determined by the input file. - -The image can be losslessly transformed by giving one of these switches: - -flip horizontal Mirror image horizontally (left-right). - -flip vertical Mirror image vertically (top-bottom). - -rotate 90 Rotate image 90 degrees clockwise. - -rotate 180 Rotate image 180 degrees. - -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). - -transpose Transpose image (across UL-to-LR axis). - -transverse Transverse transpose (across UR-to-LL axis). - -The transpose transformation has no restrictions regarding image dimensions. -The other transformations operate rather oddly if the image dimensions are not -a multiple of the iMCU size (usually 8 or 16 pixels), because they can only -transform complete blocks of DCT coefficient data in the desired way. - -jpegtran's default behavior when transforming an odd-size image is designed -to preserve exact reversibility and mathematical consistency of the -transformation set. As stated, transpose is able to flip the entire image -area. Horizontal mirroring leaves any partial iMCU column at the right edge -untouched, but is able to flip all rows of the image. Similarly, vertical -mirroring leaves any partial iMCU row at the bottom edge untouched, but is -able to flip all columns. The other transforms can be built up as sequences -of transpose and flip operations; for consistency, their actions on edge -pixels are defined to be the same as the end result of the corresponding -transpose-and-flip sequence. - -For practical use, you may prefer to discard any untransformable edge pixels -rather than having a strange-looking strip along the right and/or bottom edges -of a transformed image. To do this, add the -trim switch: - -trim Drop non-transformable edge blocks. -Obviously, a transformation with -trim is not reversible, so strictly speaking -jpegtran with this switch is not lossless. Also, the expected mathematical -equivalences between the transformations no longer hold. For example, -"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by -"-rot 180 -trim" trims both edges. - -Another not-strictly-lossless transformation switch is: - -grayscale Force grayscale output. -This option discards the chrominance channels if the input image is YCbCr -(ie, a standard color JPEG), resulting in a grayscale JPEG file. The -luminance channel is preserved exactly, so this is a better method of reducing -to grayscale than decompression, conversion, and recompression. This switch -is particularly handy for fixing a monochrome picture that was mistakenly -encoded as a color JPEG. (In such a case, the space savings from getting rid -of the near-empty chroma channels won't be large; but the decoding time for -a grayscale JPEG is substantially less than that for a color JPEG.) - -jpegtran also recognizes these switches that control what to do with "extra" -markers, such as comment blocks: - -copy none Copy no extra markers from source file. This setting - suppresses all comments and other excess baggage - present in the source file. - -copy comments Copy only comment markers. This setting copies - comments from the source file, but discards - any other inessential data. - -copy all Copy all extra markers. This setting preserves - miscellaneous markers found in the source file, such - as JFIF thumbnails and Photoshop settings. In some - files these extra markers can be sizable. -The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, -jpegtran always did the equivalent of -copy none.) - -Additional switches recognized by jpegtran are: - -outfile filename - -maxmemory N - -verbose - -debug -These work the same as in cjpeg or djpeg. - - -THE COMMENT UTILITIES - -The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. -Although the standard doesn't actually define what COM blocks are for, they -are widely used to hold user-supplied text strings. This lets you add -annotations, titles, index terms, etc to your JPEG files, and later retrieve -them as text. COM blocks do not interfere with the image stored in the JPEG -file. The maximum size of a COM block is 64K, but you can have as many of -them as you like in one JPEG file. - -We provide two utility programs to display COM block contents and add COM -blocks to a JPEG file. - -rdjpgcom searches a JPEG file and prints the contents of any COM blocks on -standard output. The command line syntax is - rdjpgcom [-verbose] [inputfilename] -The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG -image dimensions. If you omit the input file name from the command line, -the JPEG file is read from standard input. (This may not work on some -operating systems, if binary data can't be read from stdin.) - -wrjpgcom adds a COM block, containing text you provide, to a JPEG file. -Ordinarily, the COM block is added after any existing COM blocks, but you -can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG -file; it does not modify the input file. DO NOT try to overwrite the input -file by directing wrjpgcom's output back into it; on most systems this will -just destroy your file. - -The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like -systems, it is - wrjpgcom [switches] [inputfilename] -The output file is written to standard output. The input file comes from -the named file, or from standard input if no input file is named. - -On most non-Unix systems, the syntax is - wrjpgcom [switches] inputfilename outputfilename -where both input and output file names must be given explicitly. - -wrjpgcom understands three switches: - -replace Delete any existing COM blocks from the file. - -comment "Comment text" Supply new COM text on command line. - -cfile name Read text for new COM block from named file. -(Switch names can be abbreviated.) If you have only one line of comment text -to add, you can provide it on the command line with -comment. The comment -text must be surrounded with quotes so that it is treated as a single -argument. Longer comments can be read from a text file. - -If you give neither -comment nor -cfile, then wrjpgcom will read the comment -text from standard input. (In this case an input image file name MUST be -supplied, so that the source JPEG file comes from somewhere else.) You can -enter multiple lines, up to 64KB worth. Type an end-of-file indicator -(usually control-D or control-Z) to terminate the comment text entry. - -wrjpgcom will not add a COM block if the provided comment string is empty. -Therefore -replace -comment "" can be used to delete all COM blocks from a -file. - -These utility programs do not depend on the IJG JPEG library. In -particular, the source code for rdjpgcom is intended as an illustration of -the minimum amount of code required to parse a JPEG file header correctly. diff --git a/libjpegtwrp/wizard.doc b/libjpegtwrp/wizard.doc deleted file mode 100644 index 54170b227..000000000 --- a/libjpegtwrp/wizard.doc +++ /dev/null @@ -1,211 +0,0 @@ -Advanced usage instructions for the Independent JPEG Group's JPEG software -========================================================================== - -This file describes cjpeg's "switches for wizards". - -The "wizard" switches are intended for experimentation with JPEG by persons -who are reasonably knowledgeable about the JPEG standard. If you don't know -what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files -with worse image quality and/or poorer compression than you'd get from the -default settings. Furthermore, these switches must be used with caution -when making files intended for general use, because not all JPEG decoders -will support unusual JPEG parameter settings. - - -Quantization Table Adjustment ------------------------------ - -Ordinarily, cjpeg starts with a default set of tables (the same ones given -as examples in the JPEG standard) and scales them up or down according to -the -quality setting. The details of the scaling algorithm can be found in -jcparam.c. At very low quality settings, some quantization table entries -can get scaled up to values exceeding 255. Although 2-byte quantization -values are supported by the IJG software, this feature is not in baseline -JPEG and is not supported by all implementations. If you need to ensure -wide compatibility of low-quality files, you can constrain the scaled -quantization values to no more than 255 by giving the -baseline switch. -Note that use of -baseline will result in poorer quality for the same file -size, since more bits than necessary are expended on higher AC coefficients. - -You can substitute a different set of quantization values by using the --qtables switch: - - -qtables file Use the quantization tables given in the named file. - -The specified file should be a text file containing decimal quantization -values. The file should contain one to four tables, each of 64 elements. -The tables are implicitly numbered 0,1,etc. in order of appearance. Table -entries appear in normal array order (NOT in the zigzag order in which they -will be stored in the JPEG file). - -Quantization table files are free format, in that arbitrary whitespace can -appear between numbers. Also, comments can be included: a comment starts -with '#' and extends to the end of the line. Here is an example file that -duplicates the default quantization tables: - - # Quantization tables given in JPEG spec, section K.1 - - # This is table 0 (the luminance table): - 16 11 10 16 24 40 51 61 - 12 12 14 19 26 58 60 55 - 14 13 16 24 40 57 69 56 - 14 17 22 29 51 87 80 62 - 18 22 37 56 68 109 103 77 - 24 35 55 64 81 104 113 92 - 49 64 78 87 103 121 120 101 - 72 92 95 98 112 100 103 99 - - # This is table 1 (the chrominance table): - 17 18 24 47 99 99 99 99 - 18 21 26 66 99 99 99 99 - 24 26 56 99 99 99 99 99 - 47 66 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - 99 99 99 99 99 99 99 99 - -If the -qtables switch is used without -quality, then the specified tables -are used exactly as-is. If both -qtables and -quality are used, then the -tables taken from the file are scaled in the same fashion that the default -tables would be scaled for that quality setting. If -baseline appears, then -the quantization values are constrained to the range 1-255. - -By default, cjpeg will use quantization table 0 for luminance components and -table 1 for chrominance components. To override this choice, use the -qslots -switch: - - -qslots N[,...] Select which quantization table to use for - each color component. - -The -qslots switch specifies a quantization table number for each color -component, in the order in which the components appear in the JPEG SOF marker. -For example, to create a separate table for each of Y,Cb,Cr, you could -provide a -qtables file that defines three quantization tables and say -"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color -components, then the last table number is repeated as necessary. - - -Sampling Factor Adjustment --------------------------- - -By default, cjpeg uses 2:1 horizontal and vertical downsampling when -compressing YCbCr data, and no downsampling for all other color spaces. -You can override this default with the -sample switch: - - -sample HxV[,...] Set JPEG sampling factors for each color - component. - -The -sample switch specifies the JPEG sampling factors for each color -component, in the order in which they appear in the JPEG SOF marker. -If you specify fewer HxV pairs than there are components, the remaining -components are set to 1x1 sampling. For example, the default YCbCr setting -is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to -"-sample 2x2". - -There are still some JPEG decoders in existence that support only 2x1 -sampling (also called 4:2:2 sampling). Compatibility with such decoders can -be achieved by specifying "-sample 2x1". This is not recommended unless -really necessary, since it increases file size and encoding/decoding time -with very little quality gain. - - -Multiple Scan / Progression Control ------------------------------------ - -By default, cjpeg emits a single-scan sequential JPEG file. The --progressive switch generates a progressive JPEG file using a default series -of progression parameters. You can create multiple-scan sequential JPEG -files or progressive JPEG files with custom progression parameters by using -the -scans switch: - - -scans file Use the scan sequence given in the named file. - -The specified file should be a text file containing a "scan script". -The script specifies the contents and ordering of the scans to be emitted. -Each entry in the script defines one scan. A scan definition specifies -the components to be included in the scan, and for progressive JPEG it also -specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan -definitions are separated by semicolons (';'). A semicolon after the last -scan definition is optional. - -Each scan definition contains one to four component indexes, optionally -followed by a colon (':') and the four progressive-JPEG parameters. The -component indexes denote which color component(s) are to be transmitted in -the scan. Components are numbered in the order in which they appear in the -JPEG SOF marker, with the first component being numbered 0. (Note that these -indexes are not the "component ID" codes assigned to the components, just -positional indexes.) - -The progression parameters for each scan are: - Ss Zigzag index of first coefficient included in scan - Se Zigzag index of last coefficient included in scan - Ah Zero for first scan of a coefficient, else Al of prior scan - Al Successive approximation low bit position for scan -If the progression parameters are omitted, the values 0,63,0,0 are used, -producing a sequential JPEG file. cjpeg automatically determines whether -the script represents a progressive or sequential file, by observing whether -Ss and Se values other than 0 and 63 appear. (The -progressive switch is -not needed to specify this; in fact, it is ignored when -scans appears.) -The scan script must meet the JPEG restrictions on progression sequences. -(cjpeg checks that the spec's requirements are obeyed.) - -Scan script files are free format, in that arbitrary whitespace can appear -between numbers and around punctuation. Also, comments can be included: a -comment starts with '#' and extends to the end of the line. For additional -legibility, commas or dashes can be placed between values. (Actually, any -single punctuation character other than ':' or ';' can be inserted.) For -example, the following two scan definitions are equivalent: - 0 1 2: 0 63 0 0; - 0,1,2 : 0-63, 0,0 ; - -Here is an example of a scan script that generates a partially interleaved -sequential JPEG file: - - 0; # Y only in first scan - 1 2; # Cb and Cr in second scan - -Here is an example of a progressive scan script using only spectral selection -(no successive approximation): - - # Interleaved DC scan for Y,Cb,Cr: - 0,1,2: 0-0, 0, 0 ; - # AC scans: - 0: 1-2, 0, 0 ; # First two Y AC coefficients - 0: 3-5, 0, 0 ; # Three more - 1: 1-63, 0, 0 ; # All AC coefficients for Cb - 2: 1-63, 0, 0 ; # All AC coefficients for Cr - 0: 6-9, 0, 0 ; # More Y coefficients - 0: 10-63, 0, 0 ; # Remaining Y coefficients - -Here is an example of a successive-approximation script. This is equivalent -to the default script used by "cjpeg -progressive" for YCbCr images: - - # Initial DC scan for Y,Cb,Cr (lowest bit not sent) - 0,1,2: 0-0, 0, 1 ; - # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits: - 0: 1-5, 0, 2 ; - # Send all Cr,Cb AC coefficients, minus lowest bit: - # (chroma data is usually too small to be worth subdividing further; - # but note we send Cr first since eye is least sensitive to Cb) - 2: 1-63, 0, 1 ; - 1: 1-63, 0, 1 ; - # Send remaining Y AC coefficients, minus 2 lowest bits: - 0: 6-63, 0, 2 ; - # Send next-to-lowest bit of all Y AC coefficients: - 0: 1-63, 2, 1 ; - # At this point we've sent all but the lowest bit of all coefficients. - # Send lowest bit of DC coefficients - 0,1,2: 0-0, 1, 0 ; - # Send lowest bit of AC coefficients - 2: 1-63, 1, 0 ; - 1: 1-63, 1, 0 ; - # Y AC lowest bit scan is last; it's usually the largest scan - 0: 1-63, 1, 0 ; - -It may be worth pointing out that this script is tuned for quality settings -of around 50 to 75. For lower quality settings, you'd probably want to use -a script with fewer stages of successive approximation (otherwise the -initial scans will be really bad). For higher quality settings, you might -want to use more stages of successive approximation (so that the initial -scans are not too large). diff --git a/libjpegtwrp/wrbmp.c b/libjpegtwrp/wrbmp.c deleted file mode 100644 index 3283b0f15..000000000 --- a/libjpegtwrp/wrbmp.c +++ /dev/null @@ -1,442 +0,0 @@ -/* - * wrbmp.c - * - * Copyright (C) 1994-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in Microsoft "BMP" - * format (MS Windows 3.x and OS/2 1.x flavors). - * Either 8-bit colormapped or 24-bit full-color format can be written. - * No compression is supported. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - * - * This code contributed by James Arthur Boucher. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef BMP_SUPPORTED - - -/* - * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. - * This is not yet implemented. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - -/* - * Since BMP stores scanlines bottom-to-top, we have to invert the image - * from JPEG's top-to-bottom order. To do this, we save the outgoing data - * in a virtual array during put_pixel_row calls, then actually emit the - * BMP file during finish_output. The virtual array contains one JSAMPLE per - * pixel if the output is grayscale or colormapped, three if it is full color. - */ - -/* Private version of data destination object */ - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - boolean is_os2; /* saves the OS2 format request flag */ - - jvirt_sarray_ptr whole_image; /* needed to reverse row order */ - JDIMENSION data_width; /* JSAMPLEs per row */ - JDIMENSION row_width; /* physical width of one row in the BMP file */ - int pad_bytes; /* number of padding bytes needed per row */ - JDIMENSION cur_output_row; /* next row# to write to virtual array */ -} bmp_dest_struct; - -typedef bmp_dest_struct * bmp_dest_ptr; - - -/* Forward declarations */ -LOCAL(void) write_colormap - JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest, - int map_colors, int map_entry_size)); - - -/* - * Write some pixel data. - * In this module rows_supplied will always be 1. - */ - -METHODDEF(void) -put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* This version is for writing 24-bit pixels */ -{ - bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - int pad; - - /* Access next row in virtual array */ - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->whole_image, - dest->cur_output_row, (JDIMENSION) 1, TRUE); - dest->cur_output_row++; - - /* Transfer data. Note destination values must be in BGR order - * (even though Microsoft's own documents say the opposite). - */ - inptr = dest->pub.buffer[0]; - outptr = image_ptr[0]; - for (col = cinfo->output_width; col > 0; col--) { - outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */ - outptr[1] = *inptr++; - outptr[0] = *inptr++; - outptr += 3; - } - - /* Zero out the pad bytes. */ - pad = dest->pad_bytes; - while (--pad >= 0) - *outptr++ = 0; -} - -METHODDEF(void) -put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* This version is for grayscale OR quantized color output */ -{ - bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; - JSAMPARRAY image_ptr; - register JSAMPROW inptr, outptr; - register JDIMENSION col; - int pad; - - /* Access next row in virtual array */ - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->whole_image, - dest->cur_output_row, (JDIMENSION) 1, TRUE); - dest->cur_output_row++; - - /* Transfer data. */ - inptr = dest->pub.buffer[0]; - outptr = image_ptr[0]; - for (col = cinfo->output_width; col > 0; col--) { - *outptr++ = *inptr++; /* can omit GETJSAMPLE() safely */ - } - - /* Zero out the pad bytes. */ - pad = dest->pad_bytes; - while (--pad >= 0) - *outptr++ = 0; -} - - -/* - * Startup: normally writes the file header. - * In this module we may as well postpone everything until finish_output. - */ - -METHODDEF(void) -start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - /* no work here */ -} - - -/* - * Finish up at the end of the file. - * - * Here is where we really output the BMP file. - * - * First, routines to write the Windows and OS/2 variants of the file header. - */ - -LOCAL(void) -write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) -/* Write a Windows-style BMP file header, including colormap if needed */ -{ - char bmpfileheader[14]; - char bmpinfoheader[40]; -#define PUT_2B(array,offset,value) \ - (array[offset] = (char) ((value) & 0xFF), \ - array[offset+1] = (char) (((value) >> 8) & 0xFF)) -#define PUT_4B(array,offset,value) \ - (array[offset] = (char) ((value) & 0xFF), \ - array[offset+1] = (char) (((value) >> 8) & 0xFF), \ - array[offset+2] = (char) (((value) >> 16) & 0xFF), \ - array[offset+3] = (char) (((value) >> 24) & 0xFF)) - INT32 headersize, bfSize; - int bits_per_pixel, cmap_entries; - - /* Compute colormap size and total file size */ - if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) { - /* Colormapped RGB */ - bits_per_pixel = 8; - cmap_entries = 256; - } else { - /* Unquantized, full color RGB */ - bits_per_pixel = 24; - cmap_entries = 0; - } - } else { - /* Grayscale output. We need to fake a 256-entry colormap. */ - bits_per_pixel = 8; - cmap_entries = 256; - } - /* File size */ - headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */ - bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; - - /* Set unused fields of header to 0 */ - MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); - MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader)); - - /* Fill the file header */ - bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ - bmpfileheader[1] = 0x4D; - PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ - /* we leave bfReserved1 & bfReserved2 = 0 */ - PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ - - /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */ - PUT_2B(bmpinfoheader, 0, 40); /* biSize */ - PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */ - PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */ - PUT_2B(bmpinfoheader, 12, 1); /* biPlanes - must be 1 */ - PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */ - /* we leave biCompression = 0, for none */ - /* we leave biSizeImage = 0; this is correct for uncompressed data */ - if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */ - PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */ - PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */ - } - PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */ - /* we leave biClrImportant = 0 */ - - if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) - ERREXIT(cinfo, JERR_FILE_WRITE); - if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40) - ERREXIT(cinfo, JERR_FILE_WRITE); - - if (cmap_entries > 0) - write_colormap(cinfo, dest, cmap_entries, 4); -} - - -LOCAL(void) -write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest) -/* Write an OS2-style BMP file header, including colormap if needed */ -{ - char bmpfileheader[14]; - char bmpcoreheader[12]; - INT32 headersize, bfSize; - int bits_per_pixel, cmap_entries; - - /* Compute colormap size and total file size */ - if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) { - /* Colormapped RGB */ - bits_per_pixel = 8; - cmap_entries = 256; - } else { - /* Unquantized, full color RGB */ - bits_per_pixel = 24; - cmap_entries = 0; - } - } else { - /* Grayscale output. We need to fake a 256-entry colormap. */ - bits_per_pixel = 8; - cmap_entries = 256; - } - /* File size */ - headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */ - bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height; - - /* Set unused fields of header to 0 */ - MEMZERO(bmpfileheader, SIZEOF(bmpfileheader)); - MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader)); - - /* Fill the file header */ - bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */ - bmpfileheader[1] = 0x4D; - PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */ - /* we leave bfReserved1 & bfReserved2 = 0 */ - PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */ - - /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */ - PUT_2B(bmpcoreheader, 0, 12); /* bcSize */ - PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */ - PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */ - PUT_2B(bmpcoreheader, 8, 1); /* bcPlanes - must be 1 */ - PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */ - - if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14) - ERREXIT(cinfo, JERR_FILE_WRITE); - if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12) - ERREXIT(cinfo, JERR_FILE_WRITE); - - if (cmap_entries > 0) - write_colormap(cinfo, dest, cmap_entries, 3); -} - - -/* - * Write the colormap. - * Windows uses BGR0 map entries; OS/2 uses BGR entries. - */ - -LOCAL(void) -write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest, - int map_colors, int map_entry_size) -{ - JSAMPARRAY colormap = cinfo->colormap; - int num_colors = cinfo->actual_number_of_colors; - FILE * outfile = dest->pub.output_file; - int i; - - if (colormap != NULL) { - if (cinfo->out_color_components == 3) { - /* Normal case with RGB colormap */ - for (i = 0; i < num_colors; i++) { - putc(GETJSAMPLE(colormap[2][i]), outfile); - putc(GETJSAMPLE(colormap[1][i]), outfile); - putc(GETJSAMPLE(colormap[0][i]), outfile); - if (map_entry_size == 4) - putc(0, outfile); - } - } else { - /* Grayscale colormap (only happens with grayscale quantization) */ - for (i = 0; i < num_colors; i++) { - putc(GETJSAMPLE(colormap[0][i]), outfile); - putc(GETJSAMPLE(colormap[0][i]), outfile); - putc(GETJSAMPLE(colormap[0][i]), outfile); - if (map_entry_size == 4) - putc(0, outfile); - } - } - } else { - /* If no colormap, must be grayscale data. Generate a linear "map". */ - for (i = 0; i < 256; i++) { - putc(i, outfile); - putc(i, outfile); - putc(i, outfile); - if (map_entry_size == 4) - putc(0, outfile); - } - } - /* Pad colormap with zeros to ensure specified number of colormap entries */ - if (i > map_colors) - ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i); - for (; i < map_colors; i++) { - putc(0, outfile); - putc(0, outfile); - putc(0, outfile); - if (map_entry_size == 4) - putc(0, outfile); - } -} - - -METHODDEF(void) -finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - bmp_dest_ptr dest = (bmp_dest_ptr) dinfo; - register FILE * outfile = dest->pub.output_file; - JSAMPARRAY image_ptr; - register JSAMPROW data_ptr; - JDIMENSION row; - register JDIMENSION col; - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - - /* Write the header and colormap */ - if (dest->is_os2) - write_os2_header(cinfo, dest); - else - write_bmp_header(cinfo, dest); - - /* Write the file body from our virtual array */ - for (row = cinfo->output_height; row > 0; row--) { - if (progress != NULL) { - progress->pub.pass_counter = (long) (cinfo->output_height - row); - progress->pub.pass_limit = (long) cinfo->output_height; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } - image_ptr = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE); - data_ptr = image_ptr[0]; - for (col = dest->row_width; col > 0; col--) { - putc(GETJSAMPLE(*data_ptr), outfile); - data_ptr++; - } - } - if (progress != NULL) - progress->completed_extra_passes++; - - /* Make sure we wrote the output file OK */ - fflush(outfile); - if (ferror(outfile)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for BMP format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2) -{ - bmp_dest_ptr dest; - JDIMENSION row_width; - - /* Create module interface object, fill in method pointers */ - dest = (bmp_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(bmp_dest_struct)); - dest->pub.start_output = start_output_bmp; - dest->pub.finish_output = finish_output_bmp; - dest->is_os2 = is_os2; - - if (cinfo->out_color_space == JCS_GRAYSCALE) { - dest->pub.put_pixel_rows = put_gray_rows; - } else if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) - dest->pub.put_pixel_rows = put_gray_rows; - else - dest->pub.put_pixel_rows = put_pixel_rows; - } else { - ERREXIT(cinfo, JERR_BMP_COLORSPACE); - } - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Determine width of rows in the BMP file (padded to 4-byte boundary). */ - row_width = cinfo->output_width * cinfo->output_components; - dest->data_width = row_width; - while ((row_width & 3) != 0) row_width++; - dest->row_width = row_width; - dest->pad_bytes = (int) (row_width - dest->data_width); - - /* Allocate space for inversion array, prepare for write pass */ - dest->whole_image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - row_width, cinfo->output_height, (JDIMENSION) 1); - dest->cur_output_row = 0; - if (cinfo->progress != NULL) { - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; - progress->total_extra_passes++; /* count file input as separate pass */ - } - - /* Create decompressor output buffer. */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - - return (djpeg_dest_ptr) dest; -} - -#endif /* BMP_SUPPORTED */ diff --git a/libjpegtwrp/wrgif.c b/libjpegtwrp/wrgif.c deleted file mode 100644 index 5fe832839..000000000 --- a/libjpegtwrp/wrgif.c +++ /dev/null @@ -1,399 +0,0 @@ -/* - * wrgif.c - * - * Copyright (C) 1991-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in GIF format. - * - ************************************************************************** - * NOTE: to avoid entanglements with Unisys' patent on LZW compression, * - * this code has been modified to output "uncompressed GIF" files. * - * There is no trace of the LZW algorithm in this file. * - ************************************************************************** - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - */ - -/* - * This code is loosely based on ppmtogif from the PBMPLUS distribution - * of Feb. 1991. That file contains the following copyright notice: - * Based on GIFENCODE by David Rowley . - * Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al. - * Copyright (C) 1989 by Jef Poskanzer. - * Permission to use, copy, modify, and distribute this software and its - * documentation for any purpose and without fee is hereby granted, provided - * that the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation. This software is provided "as is" without express or - * implied warranty. - * - * We are also required to state that - * "The Graphics Interchange Format(c) is the Copyright property of - * CompuServe Incorporated. GIF(sm) is a Service Mark property of - * CompuServe Incorporated." - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef GIF_SUPPORTED - - -/* Private version of data destination object */ - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - j_decompress_ptr cinfo; /* back link saves passing separate parm */ - - /* State for packing variable-width codes into a bitstream */ - int n_bits; /* current number of bits/code */ - int maxcode; /* maximum code, given n_bits */ - INT32 cur_accum; /* holds bits not yet output */ - int cur_bits; /* # of bits in cur_accum */ - - /* State for GIF code assignment */ - int ClearCode; /* clear code (doesn't change) */ - int EOFCode; /* EOF code (ditto) */ - int code_counter; /* counts output symbols */ - - /* GIF data packet construction buffer */ - int bytesinpkt; /* # of bytes in current packet */ - char packetbuf[256]; /* workspace for accumulating packet */ - -} gif_dest_struct; - -typedef gif_dest_struct * gif_dest_ptr; - -/* Largest value that will fit in N bits */ -#define MAXCODE(n_bits) ((1 << (n_bits)) - 1) - - -/* - * Routines to package finished data bytes into GIF data blocks. - * A data block consists of a count byte (1..255) and that many data bytes. - */ - -LOCAL(void) -flush_packet (gif_dest_ptr dinfo) -/* flush any accumulated data */ -{ - if (dinfo->bytesinpkt > 0) { /* never write zero-length packet */ - dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++; - if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt) - != (size_t) dinfo->bytesinpkt) - ERREXIT(dinfo->cinfo, JERR_FILE_WRITE); - dinfo->bytesinpkt = 0; - } -} - - -/* Add a character to current packet; flush to disk if necessary */ -#define CHAR_OUT(dinfo,c) \ - { (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c); \ - if ((dinfo)->bytesinpkt >= 255) \ - flush_packet(dinfo); \ - } - - -/* Routine to convert variable-width codes into a byte stream */ - -LOCAL(void) -output (gif_dest_ptr dinfo, int code) -/* Emit a code of n_bits bits */ -/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */ -{ - dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits; - dinfo->cur_bits += dinfo->n_bits; - - while (dinfo->cur_bits >= 8) { - CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); - dinfo->cur_accum >>= 8; - dinfo->cur_bits -= 8; - } -} - - -/* The pseudo-compression algorithm. - * - * In this module we simply output each pixel value as a separate symbol; - * thus, no compression occurs. In fact, there is expansion of one bit per - * pixel, because we use a symbol width one bit wider than the pixel width. - * - * GIF ordinarily uses variable-width symbols, and the decoder will expect - * to ratchet up the symbol width after a fixed number of symbols. - * To simplify the logic and keep the expansion penalty down, we emit a - * GIF Clear code to reset the decoder just before the width would ratchet up. - * Thus, all the symbols in the output file will have the same bit width. - * Note that emitting the Clear codes at the right times is a mere matter of - * counting output symbols and is in no way dependent on the LZW patent. - * - * With a small basic pixel width (low color count), Clear codes will be - * needed very frequently, causing the file to expand even more. So this - * simplistic approach wouldn't work too well on bilevel images, for example. - * But for output of JPEG conversions the pixel width will usually be 8 bits - * (129 to 256 colors), so the overhead added by Clear symbols is only about - * one symbol in every 256. - */ - -LOCAL(void) -compress_init (gif_dest_ptr dinfo, int i_bits) -/* Initialize pseudo-compressor */ -{ - /* init all the state variables */ - dinfo->n_bits = i_bits; - dinfo->maxcode = MAXCODE(dinfo->n_bits); - dinfo->ClearCode = (1 << (i_bits - 1)); - dinfo->EOFCode = dinfo->ClearCode + 1; - dinfo->code_counter = dinfo->ClearCode + 2; - /* init output buffering vars */ - dinfo->bytesinpkt = 0; - dinfo->cur_accum = 0; - dinfo->cur_bits = 0; - /* GIF specifies an initial Clear code */ - output(dinfo, dinfo->ClearCode); -} - - -LOCAL(void) -compress_pixel (gif_dest_ptr dinfo, int c) -/* Accept and "compress" one pixel value. - * The given value must be less than n_bits wide. - */ -{ - /* Output the given pixel value as a symbol. */ - output(dinfo, c); - /* Issue Clear codes often enough to keep the reader from ratcheting up - * its symbol size. - */ - if (dinfo->code_counter < dinfo->maxcode) { - dinfo->code_counter++; - } else { - output(dinfo, dinfo->ClearCode); - dinfo->code_counter = dinfo->ClearCode + 2; /* reset the counter */ - } -} - - -LOCAL(void) -compress_term (gif_dest_ptr dinfo) -/* Clean up at end */ -{ - /* Send an EOF code */ - output(dinfo, dinfo->EOFCode); - /* Flush the bit-packing buffer */ - if (dinfo->cur_bits > 0) { - CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF); - } - /* Flush the packet buffer */ - flush_packet(dinfo); -} - - -/* GIF header construction */ - - -LOCAL(void) -put_word (gif_dest_ptr dinfo, unsigned int w) -/* Emit a 16-bit word, LSB first */ -{ - putc(w & 0xFF, dinfo->pub.output_file); - putc((w >> 8) & 0xFF, dinfo->pub.output_file); -} - - -LOCAL(void) -put_3bytes (gif_dest_ptr dinfo, int val) -/* Emit 3 copies of same byte value --- handy subr for colormap construction */ -{ - putc(val, dinfo->pub.output_file); - putc(val, dinfo->pub.output_file); - putc(val, dinfo->pub.output_file); -} - - -LOCAL(void) -emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap) -/* Output the GIF file header, including color map */ -/* If colormap==NULL, synthesize a gray-scale colormap */ -{ - int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte; - int cshift = dinfo->cinfo->data_precision - 8; - int i; - - if (num_colors > 256) - ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors); - /* Compute bits/pixel and related values */ - BitsPerPixel = 1; - while (num_colors > (1 << BitsPerPixel)) - BitsPerPixel++; - ColorMapSize = 1 << BitsPerPixel; - if (BitsPerPixel <= 1) - InitCodeSize = 2; - else - InitCodeSize = BitsPerPixel; - /* - * Write the GIF header. - * Note that we generate a plain GIF87 header for maximum compatibility. - */ - putc('G', dinfo->pub.output_file); - putc('I', dinfo->pub.output_file); - putc('F', dinfo->pub.output_file); - putc('8', dinfo->pub.output_file); - putc('7', dinfo->pub.output_file); - putc('a', dinfo->pub.output_file); - /* Write the Logical Screen Descriptor */ - put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); - put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); - FlagByte = 0x80; /* Yes, there is a global color table */ - FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */ - FlagByte |= (BitsPerPixel-1); /* size of global color table */ - putc(FlagByte, dinfo->pub.output_file); - putc(0, dinfo->pub.output_file); /* Background color index */ - putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */ - /* Write the Global Color Map */ - /* If the color map is more than 8 bits precision, */ - /* we reduce it to 8 bits by shifting */ - for (i=0; i < ColorMapSize; i++) { - if (i < num_colors) { - if (colormap != NULL) { - if (dinfo->cinfo->out_color_space == JCS_RGB) { - /* Normal case: RGB color map */ - putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file); - putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file); - putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file); - } else { - /* Grayscale "color map": possible if quantizing grayscale image */ - put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift); - } - } else { - /* Create a gray-scale map of num_colors values, range 0..255 */ - put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1)); - } - } else { - /* fill out the map to a power of 2 */ - put_3bytes(dinfo, 0); - } - } - /* Write image separator and Image Descriptor */ - putc(',', dinfo->pub.output_file); /* separator */ - put_word(dinfo, 0); /* left/top offset */ - put_word(dinfo, 0); - put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */ - put_word(dinfo, (unsigned int) dinfo->cinfo->output_height); - /* flag byte: not interlaced, no local color map */ - putc(0x00, dinfo->pub.output_file); - /* Write Initial Code Size byte */ - putc(InitCodeSize, dinfo->pub.output_file); - - /* Initialize for "compression" of image data */ - compress_init(dinfo, InitCodeSize+1); -} - - -/* - * Startup: write the file header. - */ - -METHODDEF(void) -start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - gif_dest_ptr dest = (gif_dest_ptr) dinfo; - - if (cinfo->quantize_colors) - emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap); - else - emit_header(dest, 256, (JSAMPARRAY) NULL); -} - - -/* - * Write some pixel data. - * In this module rows_supplied will always be 1. - */ - -METHODDEF(void) -put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - gif_dest_ptr dest = (gif_dest_ptr) dinfo; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - for (col = cinfo->output_width; col > 0; col--) { - compress_pixel(dest, GETJSAMPLE(*ptr++)); - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - gif_dest_ptr dest = (gif_dest_ptr) dinfo; - - /* Flush "compression" mechanism */ - compress_term(dest); - /* Write a zero-length data block to end the series */ - putc(0, dest->pub.output_file); - /* Write the GIF terminator mark */ - putc(';', dest->pub.output_file); - /* Make sure we wrote the output file OK */ - fflush(dest->pub.output_file); - if (ferror(dest->pub.output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for GIF format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_gif (j_decompress_ptr cinfo) -{ - gif_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (gif_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(gif_dest_struct)); - dest->cinfo = cinfo; /* make back link for subroutines */ - dest->pub.start_output = start_output_gif; - dest->pub.put_pixel_rows = put_pixel_rows; - dest->pub.finish_output = finish_output_gif; - - if (cinfo->out_color_space != JCS_GRAYSCALE && - cinfo->out_color_space != JCS_RGB) - ERREXIT(cinfo, JERR_GIF_COLORSPACE); - - /* Force quantization if color or if > 8 bits input */ - if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) { - /* Force quantization to at most 256 colors */ - cinfo->quantize_colors = TRUE; - if (cinfo->desired_number_of_colors > 256) - cinfo->desired_number_of_colors = 256; - } - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - if (cinfo->output_components != 1) /* safety check: just one component? */ - ERREXIT(cinfo, JERR_GIF_BUG); - - /* Create decompressor output buffer. */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - - return (djpeg_dest_ptr) dest; -} - -#endif /* GIF_SUPPORTED */ diff --git a/libjpegtwrp/wrjpgcom.1 b/libjpegtwrp/wrjpgcom.1 deleted file mode 100644 index d419a9999..000000000 --- a/libjpegtwrp/wrjpgcom.1 +++ /dev/null @@ -1,103 +0,0 @@ -.TH WRJPGCOM 1 "15 June 1995" -.SH NAME -wrjpgcom \- insert text comments into a JPEG file -.SH SYNOPSIS -.B wrjpgcom -[ -.B \-replace -] -[ -.BI \-comment " text" -] -[ -.BI \-cfile " name" -] -[ -.I filename -] -.LP -.SH DESCRIPTION -.LP -.B wrjpgcom -reads the named JPEG/JFIF file, or the standard input if no file is named, -and generates a new JPEG/JFIF file on standard output. A comment block is -added to the file. -.PP -The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. -Although the standard doesn't actually define what COM blocks are for, they -are widely used to hold user-supplied text strings. This lets you add -annotations, titles, index terms, etc to your JPEG files, and later retrieve -them as text. COM blocks do not interfere with the image stored in the JPEG -file. The maximum size of a COM block is 64K, but you can have as many of -them as you like in one JPEG file. -.PP -.B wrjpgcom -adds a COM block, containing text you provide, to a JPEG file. -Ordinarily, the COM block is added after any existing COM blocks; but you -can delete the old COM blocks if you wish. -.SH OPTIONS -Switch names may be abbreviated, and are not case sensitive. -.TP -.B \-replace -Delete any existing COM blocks from the file. -.TP -.BI \-comment " text" -Supply text for new COM block on command line. -.TP -.BI \-cfile " name" -Read text for new COM block from named file. -.PP -If you have only one line of comment text to add, you can provide it on the -command line with -.BR \-comment . -The comment text must be surrounded with quotes so that it is treated as a -single argument. Longer comments can be read from a text file. -.PP -If you give neither -.B \-comment -nor -.BR \-cfile , -then -.B wrjpgcom -will read the comment text from standard input. (In this case an input image -file name MUST be supplied, so that the source JPEG file comes from somewhere -else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file -indicator (usually control-D) to terminate the comment text entry. -.PP -.B wrjpgcom -will not add a COM block if the provided comment string is empty. Therefore -\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file. -.SH EXAMPLES -.LP -Add a short comment to in.jpg, producing out.jpg: -.IP -.B wrjpgcom \-c -\fI"View of my back yard" in.jpg -.B > -.I out.jpg -.PP -Attach a long comment previously stored in comment.txt: -.IP -.B wrjpgcom -.I in.jpg -.B < -.I comment.txt -.B > -.I out.jpg -.PP -or equivalently -.IP -.B wrjpgcom -.B -cfile -.I comment.txt -.B < -.I in.jpg -.B > -.I out.jpg -.SH SEE ALSO -.BR cjpeg (1), -.BR djpeg (1), -.BR jpegtran (1), -.BR rdjpgcom (1) -.SH AUTHOR -Independent JPEG Group diff --git a/libjpegtwrp/wrjpgcom.c b/libjpegtwrp/wrjpgcom.c deleted file mode 100644 index 8c04b0551..000000000 --- a/libjpegtwrp/wrjpgcom.c +++ /dev/null @@ -1,583 +0,0 @@ -/* - * wrjpgcom.c - * - * Copyright (C) 1994-1997, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains a very simple stand-alone application that inserts - * user-supplied text as a COM (comment) marker in a JFIF file. - * This may be useful as an example of the minimum logic needed to parse - * JPEG markers. - */ - -#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */ -#include "jinclude.h" /* get auto-config symbols, */ - -#ifndef HAVE_STDLIB_H /* should declare malloc() */ -extern void * malloc (); -#endif -#include /* to declare isupper(), tolower() */ -#ifdef USE_SETMODE -#include /* to declare setmode()'s parameter macros */ -/* If you have setmode() but not , just delete this line: */ -#include /* to declare setmode() */ -#endif - -#ifdef USE_CCOMMAND /* command-line reader for Macintosh */ -#ifdef __MWERKS__ -#include /* Metrowerks needs this */ -#include /* ... and this */ -#endif -#ifdef THINK_C -#include /* Think declares it here */ -#endif -#endif - -#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ -#define READ_BINARY "r" -#define WRITE_BINARY "w" -#else -#ifdef VMS /* VMS is very nonstandard */ -#define READ_BINARY "rb", "ctx=stm" -#define WRITE_BINARY "wb", "ctx=stm" -#else /* standard ANSI-compliant case */ -#define READ_BINARY "rb" -#define WRITE_BINARY "wb" -#endif -#endif - -#ifndef EXIT_FAILURE /* define exit() codes if not provided */ -#define EXIT_FAILURE 1 -#endif -#ifndef EXIT_SUCCESS -#ifdef VMS -#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ -#else -#define EXIT_SUCCESS 0 -#endif -#endif - -/* Reduce this value if your malloc() can't allocate blocks up to 64K. - * On DOS, compiling in large model is usually a better solution. - */ - -#ifndef MAX_COM_LENGTH -#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */ -#endif - - -/* - * These macros are used to read the input file and write the output file. - * To reuse this code in another application, you might need to change these. - */ - -static FILE * infile; /* input JPEG file */ - -/* Return next input byte, or EOF if no more */ -#define NEXTBYTE() getc(infile) - -static FILE * outfile; /* output JPEG file */ - -/* Emit an output byte */ -#define PUTBYTE(x) putc((x), outfile) - - -/* Error exit handler */ -#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE)) - - -/* Read one byte, testing for EOF */ -static int -read_1_byte (void) -{ - int c; - - c = NEXTBYTE(); - if (c == EOF) - ERREXIT("Premature EOF in JPEG file"); - return c; -} - -/* Read 2 bytes, convert to unsigned int */ -/* All 2-byte quantities in JPEG markers are MSB first */ -static unsigned int -read_2_bytes (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - if (c1 == EOF) - ERREXIT("Premature EOF in JPEG file"); - c2 = NEXTBYTE(); - if (c2 == EOF) - ERREXIT("Premature EOF in JPEG file"); - return (((unsigned int) c1) << 8) + ((unsigned int) c2); -} - - -/* Routines to write data to output file */ - -static void -write_1_byte (int c) -{ - PUTBYTE(c); -} - -static void -write_2_bytes (unsigned int val) -{ - PUTBYTE((val >> 8) & 0xFF); - PUTBYTE(val & 0xFF); -} - -static void -write_marker (int marker) -{ - PUTBYTE(0xFF); - PUTBYTE(marker); -} - -static void -copy_rest_of_file (void) -{ - int c; - - while ((c = NEXTBYTE()) != EOF) - PUTBYTE(c); -} - - -/* - * JPEG markers consist of one or more 0xFF bytes, followed by a marker - * code byte (which is not an FF). Here are the marker codes of interest - * in this program. (See jdmarker.c for a more complete list.) - */ - -#define M_SOF0 0xC0 /* Start Of Frame N */ -#define M_SOF1 0xC1 /* N indicates which compression process */ -#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */ -#define M_SOF3 0xC3 -#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */ -#define M_SOF6 0xC6 -#define M_SOF7 0xC7 -#define M_SOF9 0xC9 -#define M_SOF10 0xCA -#define M_SOF11 0xCB -#define M_SOF13 0xCD -#define M_SOF14 0xCE -#define M_SOF15 0xCF -#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */ -#define M_EOI 0xD9 /* End Of Image (end of datastream) */ -#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */ -#define M_COM 0xFE /* COMment */ - - -/* - * Find the next JPEG marker and return its marker code. - * We expect at least one FF byte, possibly more if the compressor used FFs - * to pad the file. (Padding FFs will NOT be replicated in the output file.) - * There could also be non-FF garbage between markers. The treatment of such - * garbage is unspecified; we choose to skip over it but emit a warning msg. - * NB: this routine must not be used after seeing SOS marker, since it will - * not deal correctly with FF/00 sequences in the compressed image data... - */ - -static int -next_marker (void) -{ - int c; - int discarded_bytes = 0; - - /* Find 0xFF byte; count and skip any non-FFs. */ - c = read_1_byte(); - while (c != 0xFF) { - discarded_bytes++; - c = read_1_byte(); - } - /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs - * are legal as pad bytes, so don't count them in discarded_bytes. - */ - do { - c = read_1_byte(); - } while (c == 0xFF); - - if (discarded_bytes != 0) { - fprintf(stderr, "Warning: garbage data found in JPEG file\n"); - } - - return c; -} - - -/* - * Read the initial marker, which should be SOI. - * For a JFIF file, the first two bytes of the file should be literally - * 0xFF M_SOI. To be more general, we could use next_marker, but if the - * input file weren't actually JPEG at all, next_marker might read the whole - * file and then return a misleading error message... - */ - -static int -first_marker (void) -{ - int c1, c2; - - c1 = NEXTBYTE(); - c2 = NEXTBYTE(); - if (c1 != 0xFF || c2 != M_SOI) - ERREXIT("Not a JPEG file"); - return c2; -} - - -/* - * Most types of marker are followed by a variable-length parameter segment. - * This routine skips over the parameters for any marker we don't otherwise - * want to process. - * Note that we MUST skip the parameter segment explicitly in order not to - * be fooled by 0xFF bytes that might appear within the parameter segment; - * such bytes do NOT introduce new markers. - */ - -static void -copy_variable (void) -/* Copy an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - write_2_bytes(length); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - write_1_byte(read_1_byte()); - length--; - } -} - -static void -skip_variable (void) -/* Skip over an unknown or uninteresting variable-length marker */ -{ - unsigned int length; - - /* Get the marker parameter length count */ - length = read_2_bytes(); - /* Length includes itself, so must be at least 2 */ - if (length < 2) - ERREXIT("Erroneous JPEG marker length"); - length -= 2; - /* Skip over the remaining bytes */ - while (length > 0) { - (void) read_1_byte(); - length--; - } -} - - -/* - * Parse the marker stream until SOFn or EOI is seen; - * copy data to output, but discard COM markers unless keep_COM is true. - */ - -static int -scan_JPEG_header (int keep_COM) -{ - int marker; - - /* Expect SOI at start of file */ - if (first_marker() != M_SOI) - ERREXIT("Expected SOI marker first"); - write_marker(M_SOI); - - /* Scan miscellaneous markers until we reach SOFn. */ - for (;;) { - marker = next_marker(); - switch (marker) { - /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be, - * treated as SOFn. C4 in particular is actually DHT. - */ - case M_SOF0: /* Baseline */ - case M_SOF1: /* Extended sequential, Huffman */ - case M_SOF2: /* Progressive, Huffman */ - case M_SOF3: /* Lossless, Huffman */ - case M_SOF5: /* Differential sequential, Huffman */ - case M_SOF6: /* Differential progressive, Huffman */ - case M_SOF7: /* Differential lossless, Huffman */ - case M_SOF9: /* Extended sequential, arithmetic */ - case M_SOF10: /* Progressive, arithmetic */ - case M_SOF11: /* Lossless, arithmetic */ - case M_SOF13: /* Differential sequential, arithmetic */ - case M_SOF14: /* Differential progressive, arithmetic */ - case M_SOF15: /* Differential lossless, arithmetic */ - return marker; - - case M_SOS: /* should not see compressed data before SOF */ - ERREXIT("SOS without prior SOFn"); - break; - - case M_EOI: /* in case it's a tables-only JPEG stream */ - return marker; - - case M_COM: /* Existing COM: conditionally discard */ - if (keep_COM) { - write_marker(marker); - copy_variable(); - } else { - skip_variable(); - } - break; - - default: /* Anything else just gets copied */ - write_marker(marker); - copy_variable(); /* we assume it has a parameter count... */ - break; - } - } /* end loop */ -} - - -/* Command line parsing code */ - -static const char * progname; /* program name for error messages */ - - -static void -usage (void) -/* complain about bad command line */ -{ - fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n"); - fprintf(stderr, "You can add to or replace any existing comment(s).\n"); - - fprintf(stderr, "Usage: %s [switches] ", progname); -#ifdef TWO_FILE_COMMANDLINE - fprintf(stderr, "inputfile outputfile\n"); -#else - fprintf(stderr, "[inputfile]\n"); -#endif - - fprintf(stderr, "Switches (names may be abbreviated):\n"); - fprintf(stderr, " -replace Delete any existing comments\n"); - fprintf(stderr, " -comment \"text\" Insert comment with given text\n"); - fprintf(stderr, " -cfile name Read comment from named file\n"); - fprintf(stderr, "Notice that you must put quotes around the comment text\n"); - fprintf(stderr, "when you use -comment.\n"); - fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n"); - fprintf(stderr, "then the comment text is read from standard input.\n"); - fprintf(stderr, "It can be multiple lines, up to %u characters total.\n", - (unsigned int) MAX_COM_LENGTH); -#ifndef TWO_FILE_COMMANDLINE - fprintf(stderr, "You must specify an input JPEG file name when supplying\n"); - fprintf(stderr, "comment text from standard input.\n"); -#endif - - exit(EXIT_FAILURE); -} - - -static int -keymatch (char * arg, const char * keyword, int minchars) -/* Case-insensitive matching of (possibly abbreviated) keyword switches. */ -/* keyword is the constant keyword (must be lower case already), */ -/* minchars is length of minimum legal abbreviation. */ -{ - register int ca, ck; - register int nmatched = 0; - - while ((ca = *arg++) != '\0') { - if ((ck = *keyword++) == '\0') - return 0; /* arg longer than keyword, no good */ - if (isupper(ca)) /* force arg to lcase (assume ck is already) */ - ca = tolower(ca); - if (ca != ck) - return 0; /* no good */ - nmatched++; /* count matched characters */ - } - /* reached end of argument; fail if it's too short for unique abbrev */ - if (nmatched < minchars) - return 0; - return 1; /* A-OK */ -} - - -/* - * The main program. - */ - -int -main (int argc, char **argv) -{ - int argn; - char * arg; - int keep_COM = 1; - char * comment_arg = NULL; - FILE * comment_file = NULL; - unsigned int comment_length = 0; - int marker; - - /* On Mac, fetch a command line. */ -#ifdef USE_CCOMMAND - argc = ccommand(&argv); -#endif - - progname = argv[0]; - if (progname == NULL || progname[0] == 0) - progname = "wrjpgcom"; /* in case C library doesn't provide it */ - - /* Parse switches, if any */ - for (argn = 1; argn < argc; argn++) { - arg = argv[argn]; - if (arg[0] != '-') - break; /* not switch, must be file name */ - arg++; /* advance over '-' */ - if (keymatch(arg, "replace", 1)) { - keep_COM = 0; - } else if (keymatch(arg, "cfile", 2)) { - if (++argn >= argc) usage(); - if ((comment_file = fopen(argv[argn], "r")) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else if (keymatch(arg, "comment", 1)) { - if (++argn >= argc) usage(); - comment_arg = argv[argn]; - /* If the comment text starts with '"', then we are probably running - * under MS-DOG and must parse out the quoted string ourselves. Sigh. - */ - if (comment_arg[0] == '"') { - comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); - if (comment_arg == NULL) - ERREXIT("Insufficient memory"); - strcpy(comment_arg, argv[argn]+1); - for (;;) { - comment_length = (unsigned int) strlen(comment_arg); - if (comment_length > 0 && comment_arg[comment_length-1] == '"') { - comment_arg[comment_length-1] = '\0'; /* zap terminating quote */ - break; - } - if (++argn >= argc) - ERREXIT("Missing ending quote mark"); - strcat(comment_arg, " "); - strcat(comment_arg, argv[argn]); - } - } - comment_length = (unsigned int) strlen(comment_arg); - } else - usage(); - } - - /* Cannot use both -comment and -cfile. */ - if (comment_arg != NULL && comment_file != NULL) - usage(); - /* If there is neither -comment nor -cfile, we will read the comment text - * from stdin; in this case there MUST be an input JPEG file name. - */ - if (comment_arg == NULL && comment_file == NULL && argn >= argc) - usage(); - - /* Open the input file. */ - if (argn < argc) { - if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]); - exit(EXIT_FAILURE); - } - } else { - /* default input file is stdin */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdin), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdin\n", progname); - exit(EXIT_FAILURE); - } -#else - infile = stdin; -#endif - } - - /* Open the output file. */ -#ifdef TWO_FILE_COMMANDLINE - /* Must have explicit output file name */ - if (argn != argc-2) { - fprintf(stderr, "%s: must name one input and one output file\n", - progname); - usage(); - } - if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]); - exit(EXIT_FAILURE); - } -#else - /* Unix style: expect zero or one file name */ - if (argn < argc-1) { - fprintf(stderr, "%s: only one input file\n", progname); - usage(); - } - /* default output file is stdout */ -#ifdef USE_SETMODE /* need to hack file mode? */ - setmode(fileno(stdout), O_BINARY); -#endif -#ifdef USE_FDOPEN /* need to re-open in binary mode? */ - if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { - fprintf(stderr, "%s: can't open stdout\n", progname); - exit(EXIT_FAILURE); - } -#else - outfile = stdout; -#endif -#endif /* TWO_FILE_COMMANDLINE */ - - /* Collect comment text from comment_file or stdin, if necessary */ - if (comment_arg == NULL) { - FILE * src_file; - int c; - - comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH); - if (comment_arg == NULL) - ERREXIT("Insufficient memory"); - comment_length = 0; - src_file = (comment_file != NULL ? comment_file : stdin); - while ((c = getc(src_file)) != EOF) { - if (comment_length >= (unsigned int) MAX_COM_LENGTH) { - fprintf(stderr, "Comment text may not exceed %u bytes\n", - (unsigned int) MAX_COM_LENGTH); - exit(EXIT_FAILURE); - } - comment_arg[comment_length++] = (char) c; - } - if (comment_file != NULL) - fclose(comment_file); - } - - /* Copy JPEG headers until SOFn marker; - * we will insert the new comment marker just before SOFn. - * This (a) causes the new comment to appear after, rather than before, - * existing comments; and (b) ensures that comments come after any JFIF - * or JFXX markers, as required by the JFIF specification. - */ - marker = scan_JPEG_header(keep_COM); - /* Insert the new COM marker, but only if nonempty text has been supplied */ - if (comment_length > 0) { - write_marker(M_COM); - write_2_bytes(comment_length + 2); - while (comment_length > 0) { - write_1_byte(*comment_arg++); - comment_length--; - } - } - /* Duplicate the remainder of the source file. - * Note that any COM markers occuring after SOF will not be touched. - */ - write_marker(marker); - copy_rest_of_file(); - - /* All done. */ - exit(EXIT_SUCCESS); - return 0; /* suppress no-return-value warnings */ -} diff --git a/libjpegtwrp/wrppm.c b/libjpegtwrp/wrppm.c deleted file mode 100644 index 6c6d90881..000000000 --- a/libjpegtwrp/wrppm.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * wrppm.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in PPM/PGM format. - * The extended 2-byte-per-sample raw PPM/PGM formats are supported. - * The PBMPLUS library is NOT required to compile this software - * (but it is highly useful as a set of PPM image manipulation programs). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef PPM_SUPPORTED - - -/* - * For 12-bit JPEG data, we either downscale the values to 8 bits - * (to write standard byte-per-sample PPM/PGM files), or output - * nonstandard word-per-sample PPM/PGM files. Downscaling is done - * if PPM_NORAWWORD is defined (this can be done in the Makefile - * or in jconfig.h). - * (When the core library supports data precision reduction, a cleaner - * implementation will be to ask for that instead.) - */ - -#if BITS_IN_JSAMPLE == 8 -#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) (v) -#define BYTESPERSAMPLE 1 -#define PPM_MAXVAL 255 -#else -#ifdef PPM_NORAWWORD -#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8)) -#define BYTESPERSAMPLE 1 -#define PPM_MAXVAL 255 -#else -/* The word-per-sample format always puts the LSB first. */ -#define PUTPPMSAMPLE(ptr,v) \ - { register int val_ = v; \ - *ptr++ = (char) (val_ & 0xFF); \ - *ptr++ = (char) ((val_ >> 8) & 0xFF); \ - } -#define BYTESPERSAMPLE 2 -#define PPM_MAXVAL ((1<pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * This code is used when we have to copy the data and apply a pixel - * format translation. Typically this only happens in 12-bit mode. - */ - -METHODDEF(void) -copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - register char * bufferptr; - register JSAMPROW ptr; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - bufferptr = dest->iobuffer; - for (col = dest->samples_per_row; col > 0; col--) { - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++)); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Write some pixel data when color quantization is in effect. - * We have to demap the color index values to straight data. - */ - -METHODDEF(void) -put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - register char * bufferptr; - register int pixval; - register JSAMPROW ptr; - register JSAMPROW color_map0 = cinfo->colormap[0]; - register JSAMPROW color_map1 = cinfo->colormap[1]; - register JSAMPROW color_map2 = cinfo->colormap[2]; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - bufferptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - pixval = GETJSAMPLE(*ptr++); - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval])); - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval])); - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval])); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -METHODDEF(void) -put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - register char * bufferptr; - register JSAMPROW ptr; - register JSAMPROW color_map = cinfo->colormap[0]; - register JDIMENSION col; - - ptr = dest->pub.buffer[0]; - bufferptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)])); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Startup: write the file header. - */ - -METHODDEF(void) -start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - ppm_dest_ptr dest = (ppm_dest_ptr) dinfo; - - /* Emit file header */ - switch (cinfo->out_color_space) { - case JCS_GRAYSCALE: - /* emit header for raw PGM format */ - fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n", - (long) cinfo->output_width, (long) cinfo->output_height, - PPM_MAXVAL); - break; - case JCS_RGB: - /* emit header for raw PPM format */ - fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n", - (long) cinfo->output_width, (long) cinfo->output_height, - PPM_MAXVAL); - break; - default: - ERREXIT(cinfo, JERR_PPM_COLORSPACE); - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - /* Make sure we wrote the output file OK */ - fflush(dinfo->output_file); - if (ferror(dinfo->output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for PPM format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_ppm (j_decompress_ptr cinfo) -{ - ppm_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (ppm_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(ppm_dest_struct)); - dest->pub.start_output = start_output_ppm; - dest->pub.finish_output = finish_output_ppm; - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Create physical I/O buffer. Note we make this near on a PC. */ - dest->samples_per_row = cinfo->output_width * cinfo->out_color_components; - dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char)); - dest->iobuffer = (char *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width); - - if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 || - SIZEOF(JSAMPLE) != SIZEOF(char)) { - /* When quantizing, we need an output buffer for colormap indexes - * that's separate from the physical I/O buffer. We also need a - * separate buffer if pixel format translation must take place. - */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width * cinfo->output_components, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - if (! cinfo->quantize_colors) - dest->pub.put_pixel_rows = copy_pixel_rows; - else if (cinfo->out_color_space == JCS_GRAYSCALE) - dest->pub.put_pixel_rows = put_demapped_gray; - else - dest->pub.put_pixel_rows = put_demapped_rgb; - } else { - /* We will fwrite() directly from decompressor output buffer. */ - /* Synthesize a JSAMPARRAY pointer structure */ - /* Cast here implies near->far pointer conversion on PCs */ - dest->pixrow = (JSAMPROW) dest->iobuffer; - dest->pub.buffer = & dest->pixrow; - dest->pub.buffer_height = 1; - dest->pub.put_pixel_rows = put_pixel_rows; - } - - return (djpeg_dest_ptr) dest; -} - -#endif /* PPM_SUPPORTED */ diff --git a/libjpegtwrp/wrrle.c b/libjpegtwrp/wrrle.c deleted file mode 100644 index a4e73372d..000000000 --- a/libjpegtwrp/wrrle.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * wrrle.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in RLE format. - * The Utah Raster Toolkit library is required (version 3.1 or later). - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - * - * Based on code contributed by Mike Lijewski, - * with updates from Robert Hutchinson. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef RLE_SUPPORTED - -/* rle.h is provided by the Utah Raster Toolkit. */ - -#include - -/* - * We assume that JSAMPLE has the same representation as rle_pixel, - * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - - -/* - * Since RLE stores scanlines bottom-to-top, we have to invert the image - * from JPEG's top-to-bottom order. To do this, we save the outgoing data - * in a virtual array during put_pixel_row calls, then actually emit the - * RLE file during finish_output. - */ - - -/* - * For now, if we emit an RLE color map then it is always 256 entries long, - * though not all of the entries need be used. - */ - -#define CMAPBITS 8 -#define CMAPLENGTH (1<<(CMAPBITS)) - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - jvirt_sarray_ptr image; /* virtual array to store the output image */ - rle_map *colormap; /* RLE-style color map, or NULL if none */ - rle_pixel **rle_row; /* To pass rows to rle_putrow() */ - -} rle_dest_struct; - -typedef rle_dest_struct * rle_dest_ptr; - -/* Forward declarations */ -METHODDEF(void) rle_put_pixel_rows - JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied)); - - -/* - * Write the file header. - * - * In this module it's easier to wait till finish_output to write anything. - */ - -METHODDEF(void) -start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - rle_dest_ptr dest = (rle_dest_ptr) dinfo; - size_t cmapsize; - int i, ci; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - /* - * Make sure the image can be stored in RLE format. - * - * - RLE stores image dimensions as *signed* 16 bit integers. JPEG - * uses unsigned, so we have to check the width. - * - * - Colorspace is expected to be grayscale or RGB. - * - * - The number of channels (components) is expected to be 1 (grayscale/ - * pseudocolor) or 3 (truecolor/directcolor). - * (could be 2 or 4 if using an alpha channel, but we aren't) - */ - - if (cinfo->output_width > 32767 || cinfo->output_height > 32767) - ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, - cinfo->output_height); - - if (cinfo->out_color_space != JCS_GRAYSCALE && - cinfo->out_color_space != JCS_RGB) - ERREXIT(cinfo, JERR_RLE_COLORSPACE); - - if (cinfo->output_components != 1 && cinfo->output_components != 3) - ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components); - - /* Convert colormap, if any, to RLE format. */ - - dest->colormap = NULL; - - if (cinfo->quantize_colors) { - /* Allocate storage for RLE-style cmap, zero any extra entries */ - cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map); - dest->colormap = (rle_map *) (*cinfo->mem->alloc_small) - ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize); - MEMZERO(dest->colormap, cmapsize); - - /* Save away data in RLE format --- note 8-bit left shift! */ - /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */ - for (ci = 0; ci < cinfo->out_color_components; ci++) { - for (i = 0; i < cinfo->actual_number_of_colors; i++) { - dest->colormap[ci * CMAPLENGTH + i] = - GETJSAMPLE(cinfo->colormap[ci][i]) << 8; - } - } - } - - /* Set the output buffer to the first row */ - dest->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE); - dest->pub.buffer_height = 1; - - dest->pub.put_pixel_rows = rle_put_pixel_rows; - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->total_extra_passes++; /* count file writing as separate pass */ - } -#endif -} - - -/* - * Write some pixel data. - * - * This routine just saves the data away in a virtual array. - */ - -METHODDEF(void) -rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - rle_dest_ptr dest = (rle_dest_ptr) dinfo; - - if (cinfo->output_scanline < cinfo->output_height) { - dest->pub.buffer = (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, - cinfo->output_scanline, (JDIMENSION) 1, TRUE); - } -} - -/* - * Finish up at the end of the file. - * - * Here is where we really output the RLE file. - */ - -METHODDEF(void) -finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - rle_dest_ptr dest = (rle_dest_ptr) dinfo; - rle_hdr header; /* Output file information */ - rle_pixel **rle_row, *red, *green, *blue; - JSAMPROW output_row; - char cmapcomment[80]; - int row, col; - int ci; -#ifdef PROGRESS_REPORT - cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress; -#endif - - /* Initialize the header info */ - header = *rle_hdr_init(NULL); - header.rle_file = dest->pub.output_file; - header.xmin = 0; - header.xmax = cinfo->output_width - 1; - header.ymin = 0; - header.ymax = cinfo->output_height - 1; - header.alpha = 0; - header.ncolors = cinfo->output_components; - for (ci = 0; ci < cinfo->output_components; ci++) { - RLE_SET_BIT(header, ci); - } - if (cinfo->quantize_colors) { - header.ncmap = cinfo->out_color_components; - header.cmaplen = CMAPBITS; - header.cmap = dest->colormap; - /* Add a comment to the output image with the true colormap length. */ - sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors); - rle_putcom(cmapcomment, &header); - } - - /* Emit the RLE header and color map (if any) */ - rle_put_setup(&header); - - /* Now output the RLE data from our virtual array. - * We assume here that (a) rle_pixel is represented the same as JSAMPLE, - * and (b) we are not on a machine where FAR pointers differ from regular. - */ - -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_limit = cinfo->output_height; - progress->pub.pass_counter = 0; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - - if (cinfo->output_components == 1) { - for (row = cinfo->output_height-1; row >= 0; row--) { - rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, - (JDIMENSION) row, (JDIMENSION) 1, FALSE); - rle_putrow(rle_row, (int) cinfo->output_width, &header); -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - } else { - for (row = cinfo->output_height-1; row >= 0; row--) { - rle_row = (rle_pixel **) dest->rle_row; - output_row = * (*cinfo->mem->access_virt_sarray) - ((j_common_ptr) cinfo, dest->image, - (JDIMENSION) row, (JDIMENSION) 1, FALSE); - red = rle_row[0]; - green = rle_row[1]; - blue = rle_row[2]; - for (col = cinfo->output_width; col > 0; col--) { - *red++ = GETJSAMPLE(*output_row++); - *green++ = GETJSAMPLE(*output_row++); - *blue++ = GETJSAMPLE(*output_row++); - } - rle_putrow(rle_row, (int) cinfo->output_width, &header); -#ifdef PROGRESS_REPORT - if (progress != NULL) { - progress->pub.pass_counter++; - (*progress->pub.progress_monitor) ((j_common_ptr) cinfo); - } -#endif - } - } - -#ifdef PROGRESS_REPORT - if (progress != NULL) - progress->completed_extra_passes++; -#endif - - /* Emit file trailer */ - rle_puteof(&header); - fflush(dest->pub.output_file); - if (ferror(dest->pub.output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for RLE format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_rle (j_decompress_ptr cinfo) -{ - rle_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (rle_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(rle_dest_struct)); - dest->pub.start_output = start_output_rle; - dest->pub.finish_output = finish_output_rle; - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Allocate a work array for output to the RLE library. */ - dest->rle_row = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, - cinfo->output_width, (JDIMENSION) cinfo->output_components); - - /* Allocate a virtual array to hold the image. */ - dest->image = (*cinfo->mem->request_virt_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, - (JDIMENSION) (cinfo->output_width * cinfo->output_components), - cinfo->output_height, (JDIMENSION) 1); - - return (djpeg_dest_ptr) dest; -} - -#endif /* RLE_SUPPORTED */ diff --git a/libjpegtwrp/wrtarga.c b/libjpegtwrp/wrtarga.c deleted file mode 100644 index cf104d2de..000000000 --- a/libjpegtwrp/wrtarga.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * wrtarga.c - * - * Copyright (C) 1991-1996, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains routines to write output images in Targa format. - * - * These routines may need modification for non-Unix environments or - * specialized applications. As they stand, they assume output to - * an ordinary stdio stream. - * - * Based on code contributed by Lee Daniel Crocker. - */ - -#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ - -#ifdef TARGA_SUPPORTED - - -/* - * To support 12-bit JPEG data, we'd have to scale output down to 8 bits. - * This is not yet implemented. - */ - -#if BITS_IN_JSAMPLE != 8 - Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */ -#endif - -/* - * The output buffer needs to be writable by fwrite(). On PCs, we must - * allocate the buffer in near data space, because we are assuming small-data - * memory model, wherein fwrite() can't reach far memory. If you need to - * process very wide images on a PC, you might have to compile in large-memory - * model, or else replace fwrite() with a putc() loop --- which will be much - * slower. - */ - - -/* Private version of data destination object */ - -typedef struct { - struct djpeg_dest_struct pub; /* public fields */ - - char *iobuffer; /* physical I/O buffer */ - JDIMENSION buffer_width; /* width of one row */ -} tga_dest_struct; - -typedef tga_dest_struct * tga_dest_ptr; - - -LOCAL(void) -write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors) -/* Create and write a Targa header */ -{ - char targaheader[18]; - - /* Set unused fields of header to 0 */ - MEMZERO(targaheader, SIZEOF(targaheader)); - - if (num_colors > 0) { - targaheader[1] = 1; /* color map type 1 */ - targaheader[5] = (char) (num_colors & 0xFF); - targaheader[6] = (char) (num_colors >> 8); - targaheader[7] = 24; /* 24 bits per cmap entry */ - } - - targaheader[12] = (char) (cinfo->output_width & 0xFF); - targaheader[13] = (char) (cinfo->output_width >> 8); - targaheader[14] = (char) (cinfo->output_height & 0xFF); - targaheader[15] = (char) (cinfo->output_height >> 8); - targaheader[17] = 0x20; /* Top-down, non-interlaced */ - - if (cinfo->out_color_space == JCS_GRAYSCALE) { - targaheader[2] = 3; /* image type = uncompressed gray-scale */ - targaheader[16] = 8; /* bits per pixel */ - } else { /* must be RGB */ - if (num_colors > 0) { - targaheader[2] = 1; /* image type = colormapped RGB */ - targaheader[16] = 8; - } else { - targaheader[2] = 2; /* image type = uncompressed RGB */ - targaheader[16] = 24; - } - } - - if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * Write some pixel data. - * In this module rows_supplied will always be 1. - */ - -METHODDEF(void) -put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* used for unquantized full-color output */ -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - register JSAMPROW inptr; - register char * outptr; - register JDIMENSION col; - - inptr = dest->pub.buffer[0]; - outptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */ - outptr[1] = (char) GETJSAMPLE(inptr[1]); - outptr[2] = (char) GETJSAMPLE(inptr[0]); - inptr += 3, outptr += 3; - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - -METHODDEF(void) -put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -/* used for grayscale OR quantized color output */ -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - register JSAMPROW inptr; - register char * outptr; - register JDIMENSION col; - - inptr = dest->pub.buffer[0]; - outptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - *outptr++ = (char) GETJSAMPLE(*inptr++); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Write some demapped pixel data when color quantization is in effect. - * For Targa, this is only applied to grayscale data. - */ - -METHODDEF(void) -put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, - JDIMENSION rows_supplied) -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - register JSAMPROW inptr; - register char * outptr; - register JSAMPROW color_map0 = cinfo->colormap[0]; - register JDIMENSION col; - - inptr = dest->pub.buffer[0]; - outptr = dest->iobuffer; - for (col = cinfo->output_width; col > 0; col--) { - *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]); - } - (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width); -} - - -/* - * Startup: write the file header. - */ - -METHODDEF(void) -start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - tga_dest_ptr dest = (tga_dest_ptr) dinfo; - int num_colors, i; - FILE *outfile; - - if (cinfo->out_color_space == JCS_GRAYSCALE) { - /* Targa doesn't have a mapped grayscale format, so we will */ - /* demap quantized gray output. Never emit a colormap. */ - write_header(cinfo, dinfo, 0); - if (cinfo->quantize_colors) - dest->pub.put_pixel_rows = put_demapped_gray; - else - dest->pub.put_pixel_rows = put_gray_rows; - } else if (cinfo->out_color_space == JCS_RGB) { - if (cinfo->quantize_colors) { - /* We only support 8-bit colormap indexes, so only 256 colors */ - num_colors = cinfo->actual_number_of_colors; - if (num_colors > 256) - ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors); - write_header(cinfo, dinfo, num_colors); - /* Write the colormap. Note Targa uses BGR byte order */ - outfile = dest->pub.output_file; - for (i = 0; i < num_colors; i++) { - putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile); - putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile); - putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile); - } - dest->pub.put_pixel_rows = put_gray_rows; - } else { - write_header(cinfo, dinfo, 0); - dest->pub.put_pixel_rows = put_pixel_rows; - } - } else { - ERREXIT(cinfo, JERR_TGA_COLORSPACE); - } -} - - -/* - * Finish up at the end of the file. - */ - -METHODDEF(void) -finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo) -{ - /* Make sure we wrote the output file OK */ - fflush(dinfo->output_file); - if (ferror(dinfo->output_file)) - ERREXIT(cinfo, JERR_FILE_WRITE); -} - - -/* - * The module selection routine for Targa format output. - */ - -GLOBAL(djpeg_dest_ptr) -jinit_write_targa (j_decompress_ptr cinfo) -{ - tga_dest_ptr dest; - - /* Create module interface object, fill in method pointers */ - dest = (tga_dest_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(tga_dest_struct)); - dest->pub.start_output = start_output_tga; - dest->pub.finish_output = finish_output_tga; - - /* Calculate output image dimensions so we can allocate space */ - jpeg_calc_output_dimensions(cinfo); - - /* Create I/O buffer. Note we make this near on a PC. */ - dest->buffer_width = cinfo->output_width * cinfo->output_components; - dest->iobuffer = (char *) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - (size_t) (dest->buffer_width * SIZEOF(char))); - - /* Create decompressor output buffer. */ - dest->pub.buffer = (*cinfo->mem->alloc_sarray) - ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1); - dest->pub.buffer_height = 1; - - return (djpeg_dest_ptr) dest; -} - -#endif /* TARGA_SUPPORTED */ diff --git a/minuitwrp/Android.mk b/minuitwrp/Android.mk index 0a760de9a..e1bf76ef1 100644 --- a/minuitwrp/Android.mk +++ b/minuitwrp/Android.mk @@ -13,7 +13,8 @@ endif LOCAL_C_INCLUDES += \ external/libpng \ external/zlib \ - system/core/include + system/core/include \ + external/jpeg LOCAL_C_INCLUDES += \ bootable/recovery/libjpegtwrp @@ -57,9 +58,9 @@ endif ifneq ($(BOARD_USE_CUSTOM_RECOVERY_FONT),) LOCAL_CFLAGS += -DBOARD_USE_CUSTOM_RECOVERY_FONT=$(BOARD_USE_CUSTOM_RECOVERY_FONT) endif -LOCAL_SHARED_LIBRARIES += libz libc libcutils -LOCAL_STATIC_LIBRARIES += libpng libjpegtwrp libpixelflinger_static +LOCAL_SHARED_LIBRARIES += libz libc libcutils libjpeg +LOCAL_STATIC_LIBRARIES += libpng libpixelflinger_static LOCAL_MODULE_TAGS := eng LOCAL_MODULE := libminuitwrp -include $(BUILD_SHARED_LIBRARY) \ No newline at end of file +include $(BUILD_SHARED_LIBRARY) diff --git a/minuitwrp/resources.c b/minuitwrp/resources.c index 4c8d8a93f..c589c9d8a 100644 --- a/minuitwrp/resources.c +++ b/minuitwrp/resources.c @@ -30,7 +30,7 @@ #include #include -#include "../libjpegtwrp/jpeglib.h" +#include "jpeglib.h" #include "minui.h" diff --git a/prebuilt/Android.mk b/prebuilt/Android.mk index 147095100..c152527c8 100644 --- a/prebuilt/Android.mk +++ b/prebuilt/Android.mk @@ -48,6 +48,7 @@ RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libstlport.so #RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libmincrypt.so RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libext4_utils.so RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libaosprecovery.so +RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libjpeg.so ifeq ($(BUILD_ID), GINGERBREAD) TW_NO_EXFAT := true endif -- cgit v1.2.3