summaryrefslogtreecommitdiffstats
path: root/updater/blockimg.cpp (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Fix a case when brotli writer fails to write last few blocks of dataTianjie Xu2017-07-221-94/+81
| | | | | | | | | | | | | | | | | | receive_new_data may exit too early if the zip processor has sent all the raw data. As a result, the last few 'new' commands will fail even though the brotli decoder has more output in its buffer. Restruct the code so that 'NewThreadInfo' owns the decoder state solely; and receive_brotli_new_data is responsible for the decompression. Also reduce the test data size to 100 blocks to avoid the test timeout. Bug: 63802629 Test: recovery_component_test. on bullhead, apply full updates with and w/o brotli compressed entries, apply an incremental update. Change-Id: Id429b2c2f31951897961525609fa12c3657216b7 (cherry picked from commit 6ed175d5412deeaec9691f85757e45452407b8e3)
* Add support to decompress brotli compressed new dataTianjie Xu2017-07-081-32/+143
| | | | | | | | | | | | | | | | | | | | | | Add a new writer that can decode the brotli-compressed system/vendor new data stored in the OTA zip. Brotli generally gives better compression rate at the cost of slightly increased time consumption. The patch.dat is already compressed by BZ; so there's no point to further compress it. For the given 1.9G bullhead system image: Size: 875M -> 787M; ~10% reduction of package size. Time: 147s -> 153s; ~4% increase of the block_image_update execution time. (I guess I/O takes much longer time than decompression.) Also it takes 4 minutes to compress the system image on my local machine, 3 more minutes than zip. Test: recovery tests pass && apply a full OTA with brotli compressed system/vendor.new.dat on bullhead Change-Id: I232335ebf662a9c55579ca073ad45265700a621e
* Retry the update if ApplyBSDiffPatch | ApplyImagePatch failsTianjie Xu2017-05-241-0/+2
| | | | | | | | | | | | | | | We have seen one case when bspatch failed likely due to patch corruption. Since the package has passed verification before, we want to reboot and retry the patch command again since there's no alternative for users. We won't delete the stash before reboot, and the src has passed SHA1 check. If there's an error on the patch, it will fail the package verification during retry. Bug: 37855643 Test: angler reboots and retries the update when bspatch fails. Change-Id: I2ebac9621bd1f0649bb301b9a28a0dd079ed4e1d
* Abort the update if there's not enough new dataTianjie Xu2017-04-081-4/+26
| | | | | | | | | | Right now the update stuck in a deadlock if there's less new data than expection. Add some checkers and abort the update if such case happens. Also add a corresponding test. Bug: 36787146 Test: update aborts correctly on bullhead && recovery_component_test passes Change-Id: I914e4a2a4cf157b99ef2fc65bd21c6981e38ca47
* Change the internal representation in RangeSet.Tao Bao2017-04-031-205/+187
| | | | | | | | | | | | | | This CL makes the following changes to RangeSet: - Uses std::pair<size_t, size_t> to represent a Range; - Uses std::vector<Range> to represent a RangeSet; - Provides const iterators (forward and reverse); - Provides const accessor; - 'blocks()' returns the number of blocks (formerly 'size'); - 'size()' returns the number of Range's (formerly 'count'). Test: recovery_unit_test Test: Apply an incremental update with the new updater. Change-Id: Ia1fbb343370a152e1f7aa050cf914c2da09b1396
* updater: Keep the parsed parameters in std::unique_ptr.Tao Bao2017-03-311-160/+157
| | | | | | | | We don't need to take raw pointers out of the parsed arguments. std::unique_ptr handles the dereferencing automatically. Test: mmma bootable/recovery Change-Id: I1beabf6e04dc350bdad7b36cee5fb345c82b28f2
* Move parse_range() and range_overlaps() into RangeSet.Tao Bao2017-03-311-110/+18
| | | | | | | | | | | | | | | Also move RangeSet into a header file to make it testable, and add unit tests. In RangeSet::Parse() (the former parse_range()), use libbase logging to do assertions. This has the same effect as the previous exit(EXIT_FAILURE) to terminate the updater process and abort an update. The difference lies in the exit status code (i.e. WEXITSTATUS(status) in install.cpp), which changes from 1 (i.e. EXIT_FAILURE) to 0. Test: recovery_unit_test Test: Apply an incremental update with the new updater. Change-Id: Ie8393c78b0d8ae0fd5f0ca0646d871308d71fff0
* Merge "updater: Move RangeSinkWrite into RangeSinkState."Tao Bao2017-03-311-164/+146
|\
| * updater: Move RangeSinkWrite into RangeSinkState.Tao Bao2017-03-291-164/+146
| | | | | | | | | | | | | | | | Then rename RangeSinkState to RangeSinkWriter. RangeSinkWriter reads data from the given FD, and writes them to the desination RangeSet. Test: Apply an incremental with the new updater. Change-Id: I5e3ab6fc082efa1726562c55b56e2d418fe4acaf
* | updater: Don't append newline when calling uiPrint().Tao Bao2017-03-301-1/+2
|/ | | | | | | | LOG(INFO) already appends a newline. Don't print redundant newline. Test: No extra blank lines when calling ui_print(). And on-screen UI shows the same. Change-Id: I74e9a8504a7146a6cb3dae02fe2406d0dd54069b
* applypatch: Let Apply{BSDiff,Image}Patch accept std::function.Tao Bao2017-03-281-75/+76
| | | | | | Test: mmma bootable/recovery system/update_engine Test: recovery_component_test Change-Id: I93c2caa87bf94a53509bb37f98f2c02bcadb6f5c
* applypatch: Change the ssize_t length parameters to size_t.Tao Bao2017-03-281-41/+40
| | | | | | | | | | | | | | | | | Mostly for applypatch family APIs like ApplyBSDiffPatch() and ApplyImagePatch(). Changing to size_t doesn't indicate they would necessarily work with very large size_t (e.g. > ssize_t), just similar to write(2). But otherwise accepting negative length doesn't make much sense. Also change the return type of SinkFn from ssize_t to size_t. Callers tell a successful sink by comparing the number of written bytes against the desired value. Negative return values like -1 are not needed. This also makes it consistent with bsdiff::bspatch interface. Test: recovery_component_test Test: Apply an incremental with the new updater. Change-Id: I7ff1615203a5c9854134f75d019e266f4ea6e714
* updater: Clean up LoadSrcTgtVersion2().Tao Bao2017-03-281-146/+143
| | | | | | | | | | | | | | | Rename to LoadSourceBlocks() by moving the target blocks parsing part into the caller. This allows detecting whether the target blocks have already had the expected data before loading the source blocks. It doesn't affect anything when applying an update package for the first time, but it skips loading the unneeded source blocks when resuming an update. It additionally avoids unnecessarily dumping the "corrupt" source/stash blocks when resuming an update. Bug: 33694730 Test: Apply an incremental update with the new updater. Test: Resume an incremental update with the new updater. Change-Id: I794fd0d1045be7b3b7f8619285dc0dade01398d0
* Merge "updater: Remove some redundant arguments."Tao Bao2017-03-261-78/+65
|\
| * updater: Remove some redundant arguments.Tao Bao2017-03-241-78/+65
| | | | | | | | | | | | | | | | | | | | Clean up a few functions that take CommandParameters& as the first parameter. We don't need to take duplicate arguments if they always come from CommandParameters. This redundancy came from the point we replaced strtok()s (commit baad2d454dc07ce916442987a2908a93fe6ae298). Test: Apply an incremental update with the new updater. Change-Id: I2912b8ce6bc7580bf7f566e125f12270e679e155
* | Merge "updater: Drop the support for BBOTA v1 and v2."Tao Bao2017-03-251-398/+330
|\|
| * updater: Drop the support for BBOTA v1 and v2.Tao Bao2017-03-241-398/+330
| | | | | | | | | | | | | | | | | | | | The script support for BBOTA v1 and v2 has been dropped in commit 8fad03e7712082eb880ffaaffb69eb13252ce220 (platform/build). Bug: 33694730 Test: Apply an incremental with the new updater. Test: recovery_component_test Change-Id: I038b1bf8d10f030cab8ec0aa6ee565c5a9545dfd
* | Merge "Removed C-style casts"Tao Bao2017-03-241-1/+1
|\ \ | |/ |/|
| * Removed C-style castsMikhail Lappo2017-03-231-1/+1
| | | | | | | | | | | | | | | | In c++ code would be cleaner to use c++ retinterpret cast instead of old c-style notation Change-Id: Ibeef5e0c374addf108c0a8876a6be45063d8e396
* | Redundant checking of STL container elementMikhail Lappo2017-03-231-3/+1
|/ | | | | | | | As of C++ specification size_type erase( const key_type& key ); removes the element (if one exists). There is no need to perform the check twice. Change-Id: I4b057c08526abc7c2a483a60f9e166e4d8f56a74
* Remove malloc in edify functionsTianjie Xu2017-03-221-13/+41
| | | | | | | | And switch them to std::vector & std::unique_ptr Bug: 32117870 Test: recovery tests passed on sailfish Change-Id: I5a45951c4bdf895be311d6d760e52e7a1b0798c3
* Fix the permission of stashed blocks created by updaterTianjie Xu2017-03-221-0/+12
| | | | | | | | | | | Our updater created the stashes with root permission. This causes an access denial when the RecoverySystem service tries to clean up these blocks after a failing update. As a result, the subsequent OTA updates may fail due to insufficient cache space. Bug: 36457133 Test: stashed blocks cleaned successfully after reboot Change-Id: If0ca99638cdfa1033646f29d9cc92b5ff1bacac1
* Revert "Revert "Print SHA-1 in hex for corrupted blocks""Tianjie Xu2017-03-171-6/+140
| | | | | | | | | This reverts commit 90eff6a340f9983792d700df3b1ea0203aced207. Also fix the bug where stashed blocks are not freed. Bug: 21124445 Test: Previous failed update succeeded on bullhead Change-Id: I23d232331a2beb51b6dcc82c957c87bc247d0268
* updater: Minor clean up to EnumerateStash().Tao Bao2017-03-161-73/+50
| | | | | | Test: Apply an incremental BBOTA package with the new updater. Test: Resume an interrupted BBOTA (so it cleans up the partial stash). Change-Id: I620cc57ee6366845bcffbc19210f7a01e2196052
* Revert "Print SHA-1 in hex for corrupted blocks"Tao Bao2017-03-151-140/+3
| | | | | | | | | | This reverts commit bb0cd75a0e1f6760bdf96bd141f3a546ffa45fbc. Broke the 'free' command that deletes a stash. Bug: 36242722 Test: The previously failed incremental applies successfully. Change-Id: I1237cb0a33adfbeea57e0465b629704862ba13aa
* Print SHA-1 in hex for corrupted blocksTianjie Xu2017-03-131-3/+140
| | | | | | | | | | | It will be helpful for debug if we know which blocks are corrupted after a verification failure. This CL prints the SHA-1 for each source block in a transfer command if these blocks don't have an expected hash. And along with the correct SHA-1, we will catch the corrupted blocks. Bug: 21124445 Test: Printed the mismatched SHA-1 for bullhead during an update. Change-Id: I683d4bdaf9a335035045b3f532b3a265b2fcbbfc
* Replace _exit(-1) with _exit(EXIT_FAILURE).Tao Bao2017-02-031-1/+1
| | | | | | | | | -1 is not a valid exit status. Also replace a few exit(1) with exit(EXIT_FAILURE). Test: mmma bootable/recovery Change-Id: I4596c8328b770bf95acccc06a4401bd5cabd4bfd
* Merge "updater: Clean up CreateStash()."Tao Bao2017-01-051-83/+84
|\
| * updater: Clean up CreateStash().Tao Bao2016-12-291-84/+85
| | | | | | | | | | | | | | Change the stash size computation from int to size_t. Test: Apply an incremental BBOTA with the new updater. Change-Id: Ib45b71b826fec6aa0ffafc67c17735825634eae0
* | updater: Refactor parse_range().Tao Bao2017-01-041-74/+63
|/ | | | | | | | Returning the parsed RangeSet directly (as opposed to using some pointer parameter) to make the code cleaner. Test: Apply an incremental with the new updater. Change-Id: I8c99e701f189eb6a3eacc0d647e5a3a85fbeb3eb
* updater: Fix the operator order.Tao Bao2016-12-141-1/+1
| | | | | | | | | | Shift operator ("<<") has a higher precedence level than ternary operator ("?"). Test: BBOTA update log says "performing update" as opposed to "performing 0". Change-Id: I0cf60cbfc11415e94f1f9f6effe75f14d13a1874
* updater: Switch to libbase logging.Tao Bao2016-12-011-99/+95
| | | | | Test: Build an updater into a package and apply it on device. Change-Id: I289b5768e9b1e44ef78e0479c64dbaa36fb1a685
* Cleanup ReadArgs & ReadValueArgs usageTianjie Xu2016-11-011-30/+24
| | | | | | | | ReadArgs will switch to using std::string and std::unique_ptr. Also cleanup the callers. Test: mma & component test passed. Change-Id: I4724406ae6c0c134a27bbd1cdd24ad5d343b2a3b
* Replace minzip with libziparchiveTianjie Xu2016-10-181-47/+26
| | | | | | | | | | | Clean up the duplicated codes that handle the zip files in bootable/recovery; and rename the library of the remaining utility functions to libotautil. Test: Update package installed successfully on angler. Bug: 19472796 Change-Id: Iea8962fcf3004473cb0322b6bb3a9ea3ca7f679e
* Change StringValue to use std::stringTianjie Xu2016-10-151-81/+73
| | | | | | | | | | | Changing the field of 'Value' in edify to std::string from char*. Meanwhile cleaning up the users of 'Value' and switching them to cpp style. Test: compontent tests passed. Bug: 31713288 Change-Id: Iec5a7d601b1e4ca40935bf1c70d325dafecec235
* Refactor libupdater into a seperate module.Tao Bao2016-10-111-2/+2
| | | | | | | | | So that we can write native tests for updater functions. This CL adds a testcase for getprop() function. Test: mmma bootable/recovery; Run recovery_component_test on device. Change-Id: Iff4c1ff63c5c71aded2f9686fed6b71cc298c228
* Check an edge case when read(2) returns 0Tianjie Xu2016-09-011-0/+4
| | | | | | | | | | We might end up in an infinite loop if read(2) reached EOF unexpectedly. The problematic code in uncrypt mentioned in the bug has been fixed by switching to libbase ReadFully(). So I grepped through the recovery code and fixed some other occurences of the issue. Bug: 31073201 Change-Id: Ib867029158ba23363b8f85d61c25058a635c5a6b
* Check the results from applypatchTianjie Xu2016-06-161-4/+10
|\ | | | | | | | | | | am: 31f8cc84cf Change-Id: I2ea241fb3e688f5f8b0558d638dd3ed502223f97
| * Check the results from applypatchTianjie Xu2016-06-161-4/+10
| | | | | | | | | | | | | | | | Check the results from applypatch in PerformCommandDiff; and abort the update on failure. Bug:29339536 Change-Id: I5087d79ba532b54250f4c17560524255c8a4fabc
* | resolve merge conflicts of 7ce287d to nyc-dev-plus-aospTianjie Xu2016-06-041-7/+52
|\| | | | | | | Change-Id: I2194d1170281f58eb508f2ef63b39c8729125f76
| * Call ioctl before each write on retryTianjie Xu2016-06-031-7/+52
| | | | | | | | | | | | | | | | If the update is a retry, ioctl(BLKDISCARD) the destination blocks before writing to these blocks. Bug: 28990135 Change-Id: I1e703808e68ebb1292cd66afd76be8fd6946ee59
* | resolve merge conflicts of 50f6417 to nyc-dev-plus-aospTianjie Xu2016-05-231-28/+56
|\| | | | | | | Change-Id: I42c127f7946e678acf6596f6352f090abc0ca019
| * Allow recovery to return error codesTianjie Xu2016-05-201-27/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Write error code, cause code, and retry count into last_install. So we can have more information about the reason of a failed OTA. Example of new last_install: @/cache/recovery/block.map package name 0 install result retry: 1 retry count (new) error: 30 error code (new) cause: 12 error cause (new) Details in: go/android-ota-errorcode Bug: 28471955 Change-Id: I00e7153c821e7355c1be81a86c7f228108f3dc37
* | Add time and I/O info to last_installTianjie Xu2016-05-181-0/+12
|\| | | | | | | | | | | | | | | | | am: dd874b1c87 * commit 'dd874b1c87eb04f28db0db2629df0adde568a74c': Add time and I/O info to last_install Change-Id: I02aa858d5ce488d3acbf5400811e2565cf7d9c75
| * Add time and I/O info to last_installTianjie Xu2016-05-161-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One example of last_install is: /sideload/package.zip 1 time_total: 101 bytes_written_system: 14574000 bytes_stashed_system: 100 bytes_written_vendor: 5107400 bytes_stashed_vendor: 0 Bug: 28658632 Change-Id: I4bf79ea71a609068d38fbce6b41bcb892524aa7a
| * Skip stashing source blocks in verify modeTianjie Xu2016-03-231-8/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently block_image_verify() stashes source blocks to /cache and in some case triggers I/O errors. To avoid this risk, We create a map from the hash value to the source blocks' range_set. When executing stash command in verify mode, source range is saved but block contents aren't stashed. And load_stash could get its value from either the stashed file from the previous update, or the contents on the source partition specified by the saved range. Bug: 27584487 Bug: 25633753 Change-Id: I775baf4bee55762b6e7b204f8294afc597afd996
| * DO NOT MERGE Control fault injection with config files instead of build flagsJed Estep2016-03-161-1/+1
| | | | | | | | | | Bug: 26570379 Change-Id: I76109d09276d6e3ed3a32b6fedafb2582f545c0c
| * resolve merge conflicts of 7b6027dde4 to master.Tao Bao2016-02-041-10/+9
| |\ | | | | | | | | | Change-Id: I1d5232f61744bb18ca5de3a16a340bc3afd110bb
| * \ Merge "IO fault injection for OTA packages"Jed Estep2016-01-091-6/+7
| |\ \
| | * | IO fault injection for OTA packagesJed Estep2016-01-061-6/+7
| | | | | | | | | | | | | | | | | | | | Bug: 25951086 Change-Id: I31c74c735eb7a975b7f41fe2b2eff042e5699c0c
| * | | updater: Add a function to check first blockTianjie Xu2015-12-181-0/+55
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | Add and register a function to check if the device has been remounted since last update during incremental OTA. This function reads block 0 and executes before partition recovery for version >= 4. Bug: 21124327 Change-Id: I8b915b9f1d4736b3609daa9d16bd123225be357f
| * | Merge "updater: Output msg when recovery is called"Tianjie Xu2015-12-111-1/+4
| |\ \
| | * | updater: Output msg when recovery is calledTianjie Xu2015-12-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Output messages in log when recovery is attempted or succeeded during incremental OTA update. Change-Id: I4033df7ae3aaecbc61921d5337eda26f79164fda
* | | | Merge "Fix google-explicit-constructor warnings."Chih-hung Hsieh2016-04-301-1/+1
|\ \ \ \
| * | | | Fix google-explicit-constructor warnings.Chih-Hung Hsieh2016-04-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Bug: 28341362 Change-Id: I5b35ae16c069e7e9229e66963386f322bd808af1
* | | | | updater: Don't zero out CommandParameters with memset(3).Tao Bao2016-04-271-2/+1
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [1] switched a few things to android::base::unique_fd including CommandParameters.fd. However, we were using memset(3) to zero out the struct, which effectively assigned unique_fd(0) to fd. When it called fd.reset(), file descriptor 0 was unintentionally closed. When FD 0 was later reassigned via open(2), it led to lseek(2) errors: "Bad file descriptor". This CL switches to using braced-init (i.e. '= {}') instead, so that the default constructor unique_fd(-1) would be called. [1]: commit bcabd0929316fdd022ea102cc86396547ad9f070 Bug: 28391985 Change-Id: If1f99932b15552714c399e65c8b80550344b758a
* | | | Switch to <android-base/unique_fd.h>.Elliott Hughes2016-03-291-25/+17
| | | | | | | | | | | | | | | | Change-Id: I13ba3f40bd52b5f3e3fe9002a45a9a8630040129
* | | | Skip stashing source blocks in verify modeTianjie Xu2016-03-251-8/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently block_image_verify() stashes source blocks to /cache and in some case triggers I/O errors. To avoid this risk, We create a map from the hash value to the source blocks' range_set. When executing stash command in verify mode, source range is saved but block contents aren't stashed. And load_stash could get its value from either the stashed file from the previous update, or the contents on the source partition specified by the saved range. Bug: 27584487 Bug: 25633753 Change-Id: I775baf4bee55762b6e7b204f8294afc597afd996 (cherry picked from commit 0188935d55206e8c2becb29e995f166cb7040355)
* | | | Control fault injection with config files instead of build flagsJed Estep2016-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Bug: 26570379 Change-Id: I76109d09276d6e3ed3a32b6fedafb2582f545c0c (cherry picked from commit d940887dde23597dc358b16d96ca48dd7480fee6)
* | | | IO fault injection for OTA packagesJed Estep2016-02-101-12/+13
| |_|/ |/| | | | | | | | | | | | | | Bug: 25951086 Change-Id: I31c74c735eb7a975b7f41fe2b2eff042e5699c0c (cherry-picked from commit f1fc48c6e62cfee42d25ad12f443e22d50c15d0b)
* | | Switch from mincrypt to BoringSSL in applypatch and updater.Sen Jiang2016-02-041-10/+9
| | | | | | | | | | | | | | | Bug: 18790686 Change-Id: I7d2136fb39b2266f5ae5be24819c617b08a6c21e
* | | updater: Add a function to check first blockTianjie Xu2016-01-071-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add and register a function to check if the device has been remounted since last update during incremental OTA. This function reads block 0 and executes before partition recovery for version >= 4. Bug: 21124327 Change-Id: I8b915b9f1d4736b3609daa9d16bd123225be357f (cherry picked from commit 30bf4765593e639966df9f460df22c3fe912e7bf)
* | | updater: Output msg when recovery is calledTianjie Xu2015-12-111-1/+4
|/ / | | | | | | | | | | | | | | Output messages in log when recovery is attempted or succeeded during incremental OTA update. Change-Id: I4033df7ae3aaecbc61921d5337eda26f79164fda (cherry picked from commit b686ba211443490111729ba9d82eb0c0b305e185)
* / updater: Replace strtok() with android::base::Split().Tao Bao2015-12-071-133/+144
|/ | | | Change-Id: I36346fa199a3261da1ae1bc310b3557fe1716d96
* Track rename from base/ to android-base/.Elliott Hughes2015-12-051-2/+2
| | | | Change-Id: I354a8c424d340a9abe21fd716a4ee0d3b177d86f
* updater: Bump up the BBOTA version to 4.Tao Bao2015-10-231-1/+1
| | | | | | | | | To accommodate new changes in N release, such as error correction [1] and other potential changes to the updater. [1]: commit 0a7b47397db3648afe6f3aeb2abb175934c2cbca Change-Id: I4dd44417d07dd0a31729894628635a0aa1659008
* Error correction: Use libfec in blockimg.cpp for recoverySami Tolvanen2015-10-191-0/+76
| | | | | | | | | | | | Add block_image_recover function to rewrite corrupted blocks on the partition. This can be attempted if block_image_verify fails. Note that we cannot use libfec during block_image_update as it may overwrite blocks required for error correction. A separate recovery pass in case the image is corrupted is the only viable option. Bug: 21893453 Change-Id: I6ff25648fff68d5f50b41a601c95c509d1cc5bce
* updater: Skip empty lines in the transfer list file.Tao Bao2015-09-261-0/+4
| | | | | | | | | We have the last line being empty as a result of android::base::Split("a\nb\n"), which leads to "missing command" warnings in the update. Just skip all the empty lines. Bug: 24373789 Change-Id: I5827e4600bd5cf0418d95477e4592fec47bbd3a9
* updater: Use android::base::ParseInt() to parse integers.Tao Bao2015-09-241-40/+25
| | | | Change-Id: Ic769eafc8d9535b1d517d3dcbd398c3fd65cddd9
* updater: Manage buffers with std::vector.Tao Bao2015-09-101-228/+168
| | | | Change-Id: Ide489e18dd8daf161b612f65b28921b61cdd8d8d
* updater: Replace the pointers in LoadSrcTgtVersion[1-3]() parameter.Tao Bao2015-09-081-29/+26
| | | | | | And inline the call to LoadSrcTgtVersion1() into SaveStash(). Change-Id: Ibf4ef2bfa2cc62df59c4e8de99fd7d8039e71ecf
* updater: Clean up C codes.Tao Bao2015-09-011-602/+429
| | | | | | | Replace C-string with std::string, pointers with references, and variable-size arrays in struct with std::vector. Change-Id: I57f361a0e58286cbcd113e9be225981da56721b2
* updater: Remove the unused isunresumable in SaveStash().Tao Bao2015-08-261-3/+3
| | | | Change-Id: I6a8d9bea4c1cd8ea7b534682061b90e893b227a2
* GOOGLEGMS-749 Fix integer overflow while applying block based OTA packageShrinivas Sahukar2015-08-221-46/+48
| | | | | | | There is an integer overflow when the size of system goes beyond the signed int limits. Hence changing pos to size_t. Change-Id: I6e5e1b2f0e72030b30a6df09a01642f4c82abc79
* updater: Clean up char* with std::string.Tao Bao2015-08-061-261/+141
| | | | | | | So we can remove a few free()s. And also replace a few pointers with references. Change-Id: I4b6332216704f4f9ea4a044b8d4bb7aa42a7ef26
* udpater: Call fsync() after rename().Tao Bao2015-08-041-0/+20
| | | | | | | We need to ensure the renamed filename reaches the underlying storage. Bug: 22840552 Change-Id: Ide2e753a2038691d472b6ee173cbf68ac998a084
* updater: Hoist fsync() to outer loop.Tao Bao2015-07-271-6/+5
| | | | | | | | | | Currently the fsync() inside write_all() may be called multiple times when performing a command. Move that to the outer loop and call it only after completing the command. Also remove the O_SYNC flag when writing a stash. Change-Id: I71e51d76051a2f7f504eef1aa585d2cb7a000d80
* recovery: Switch applypatch/ and updater/ to cpp.Tao Bao2015-07-141-0/+1991
Mostly trivial changes to make cpp compiler happy. Change-Id: I69bd1d96fcccf506007f6144faf37e11cfba1270