summaryrefslogtreecommitdiffstats
path: root/tests/Android.mk (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge "update_verifier: Support AVB."Treehugger Robot2017-06-221-0/+4
|\
| * update_verifier: Support AVB.David Zeuthen2017-05-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using AVB, PRODUCT_SUPPORTS_VERITY is not set so check for BOARD_ENABLE_AVB as well. Also AVB sets up the root filesystem as 'vroot' so map that to 'system' since this is what is expected. Managed to test at least that the code is at least compiled in: $ fastboot --set-active=_a Setting current slot to 'a'... OKAY [ 0.023s] finished. total time: 0.023s $ fastboot reboot rebooting... finished. total time: 0.050s $ adb wait-for-device $ adb logcat |grep update_verifier 03-04 05:28:56.773 630 630 I /system/bin/update_verifier: Started with arg 1: nonencrypted 03-04 05:28:56.776 630 630 I /system/bin/update_verifier: Booting slot 0: isSlotMarkedSuccessful=0 03-04 05:28:56.776 630 630 W /system/bin/update_verifier: Failed to open /data/ota_package/care_map.txt: No such file or directory 03-04 05:28:56.788 630 630 I /system/bin/update_verifier: Marked slot 0 as booted successfully. 03-04 05:28:56.788 630 630 I /system/bin/update_verifier: Leaving update_verifier. Bug: None Test: Manually tested on device using AVB bootloader. Change-Id: I13c0fe1cc5d0f397e36f5e62fcc05c8dfee5fd85
* | kill package_extract_dirTianjie Xu2017-05-241-1/+0
|/ | | | | | | It's only used by file-based OTA which has been deprecated for O. Test: mma Change-Id: I439c93155ca94554d827142c99aa6c0845cc7561
* fuse_sideload: Change the minimal block size to 4096.Tao Bao2017-05-031-0/+1
| | | | | | | | | | | | | | | | | | | run_fuse_sideload() is passing the block size as the max_read option, so it will only handle a request that involves at most two blocks at a time. However, the minimal allowed value was set to 1024 prior to this CL, which is inconsistent with the kernel code (fs/fuse/inode.c) that sets it to the greater of 4096 and the passed-in max_read option. This would fail the calls with a block size / max_read less than 4096 due to the wrongly computed block indices. Note that we didn't observe real issue in practice, because we have been using 64 KiB block sizes for both of adb and sdcard sideload calls. The issue only shows up in my local CL (to come later) that uses 1024 block size in run_fuse_sideload() tests. Test: recovery_component_test Test: adb sideload with the new recovery image on angler Change-Id: Id9f0cfea13d0d193dcb7cd41a1553a23739545f2
* Separate libupdate_verifier module and add testcases.Tao Bao2017-04-271-0/+6
| | | | | | | | Enable -Wall and expose verify_image() for testing purpose. Test: mmma bootable/recovery Test: recovery_component_test Change-Id: I1ee1db2a775bafdc1112e25a1bc7194d8d6aee4f
* Call libvintf to verify package compatibility.Tao Bao2017-04-201-0/+3
| | | | | | | | | | | | | The libvintf API has landed. Hook up to do the actual verification. Bug: 36597505 Test: recovery_component_test Test: m recoveryimage; adb sideload on angler and sailfish, with packages that contain dummy compatibility entries. Test: m recoveryimage; adb sideload on angler and sailfish, with packages that don't contain any compatibility entries. Change-Id: Idbd6f5aaef605ca51b20e667505d686de5ac781f (cherry picked from commit da320ac6ab53395ddff3cc08b88a61f977ed939a)
* Add tests for update_binary_command().Tao Bao2017-04-181-0/+4
| | | | | | | | | | | | | | | Expose update_binary_command() through private/install.h for testing purpose. Also make minor clean-ups to install.cpp: a) adding more verbose logging on ExtractToMemory failures; b) update_binary_command() taking std::string instead of const char*; c) moving a few macro and global constants into update_binary_command(). Bug: 37300957 Test: recovery_component_test on marlin Test: Build new recovery and adb sideload on angler and sailfish. Change-Id: Ib2d9068af3fee038f01c90940ccaeb0a7da374fc
* Verify the package compatibility with libvintf.Tao Bao2017-04-131-1/+2
| | | | | | | | | | | | | | | | verify_package_compatibility() is added to parse the compatibility entry (compatibility.zip) in a given OTA package. If entry is present, the information is sent to libvintf to check the compatibility. This CL doesn't actually call libvintf, since the API there is not available yet. Bug: 36597505 Test: Doesn't break the install with existing packages (i.e. w/o the compatibility entry). Test: recovery_component_test Change-Id: I3903ffa5f6ba33a5c0d761602ade6290c6752596 (cherry picked from commit 62e0bc7586077b3bde82759fb34b51b982cea20f)
* Move parse_range() and range_overlaps() into RangeSet.Tao Bao2017-03-311-0/+2
| | | | | | | | | | | | | | | Also move RangeSet into a header file to make it testable, and add unit tests. In RangeSet::Parse() (the former parse_range()), use libbase logging to do assertions. This has the same effect as the previous exit(EXIT_FAILURE) to terminate the updater process and abort an update. The difference lies in the exit status code (i.e. WEXITSTATUS(status) in install.cpp), which changes from 1 (i.e. EXIT_FAILURE) to 0. Test: recovery_unit_test Test: Apply an incremental update with the new updater. Change-Id: Ie8393c78b0d8ae0fd5f0ca0646d871308d71fff0
* tests: Remove LOCAL_ADDITIONAL_DEPENDENCIES.Tao Bao2017-03-301-4/+0
| | | | | | | | | | Per the comment in build/make/core/base_rules.mk: Ninja has an implicit dependency on the command being run, and kati will regenerate the ninja manifest if any read makefile changes, so there is no need to have dependencies on makefiles. Test: mmma bootable/recovery Change-Id: I27b97df10d40f39ad966be70b33811175a665439
* Add test config to minadbd_testDan Shi2017-03-291-0/+2
| | | | | | | | | | | | | Design doc: Generalized Suites & the Unification of APCT & CTS Workflows Design/Roadmap https://docs.google.com/document/d/1eabK3srlBLouMiBMrNP3xJPiRRdcoCquNxC8gBWPvx8/edit#heading=h.78vup5eivwzo Details about test configs changes are tracked in doc https://docs.google.com/document/d/1EWUjJ7fjy8ge_Nk0YQbFdRp8DSHo3z6GU0R8jLgrAcw/edit# Bug: 35882476 Test: local test Change-Id: I51e1b410536469d254ae7a353bc61a7df06c8324
* Remove the dead #include's in verifier.cpp.Tao Bao2017-03-181-1/+0
| | | | | | | | | | A follow-up to commit 5e535014dd7961fbf812abeaa27f3339775031f1. Also clean up Android.mk, since libverifier no longer needs anything from libminui. Test: mmma bootable/recovery Test: recovery_component_test passes. Change-Id: I1c11e4bbeef67ca34a2054debf1f5b280d509217
* Add a test to perform block_image_updateTianjie Xu2017-03-171-1/+8
| | | | | | | | | | | | | | | | | Add the following tests: stash src bspatch stashed_src tgt free stashed_src (expected a successful update) stash src free stashed_src fail_the_update (expected stashed_src freed) Bug: 36242722 Test: Test identified unfreed stashes correctly. Change-Id: I5a136e8dc31774367972fbfe8c63cbc1ddb3a113
* Merge "Refractor the code for imgdiff"Treehugger Robot2017-03-071-0/+1
|\
| * Refractor the code for imgdiffTianjie Xu2017-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | Put ImageChunk and some helper functions into a class. Also switch to using std::vector instead of malloc. Bug: 18606652 Test: imgdiff_test passed on host. Also generate a complete incremental OTA package. The file content is the same and time consumption is similar. Change-Id: Id603ada4e130ef521218400761a119001a86ca79
* | Recovery Test: add SideloadTest to test FUSE support on targetWei Wang2017-03-031-0/+1
|/ | | | | | | | | | FUSE FS is required in recovery sideload functionalites. This CL is to add a native test to flag when FUSE is not supported in the device kernel. Bug: 35768196 Test: mma, run recovery_component_test on marlin and pass all Change-Id: I43b6dbee658010df56ba4d4b0e91baa7fd1c4480
* Use bspatch from external/bsdiff.Sen Jiang2017-02-021-0/+2
| | | | | | | | | | Now ApplyBSDiffPatch() will stream the output to sink as we go instead of sinking everything at the end. Test: recovery_host_test Bug: 26982501 Change-Id: I05b6ed40d45e4b1b19ae72784cf705b731b976e3
* Remove '_static' suffix from libext2* references.Alex Deymo2017-01-241-1/+1
| | | | | | Bug: 34220783 Test: make checkbuild Change-Id: Iceea20e440a4bb6a3b254486a65a86401a2241ef
* Add checkers and tests for empty locale in PNG fileTianjie Xu2017-01-191-2/+26
| | | | | | | | | | | match_locale() will return false for empty locale string in the PNG file. Also add a manual test to validate if a PNG file is qualified to use under recovery. Bug: 34054052 Test: recovery_manual_test catches invalid PNG files successfully & Locale_test passed Change-Id: Id7e2136e1d8abf20da15825aa7901effbced8b03
* Remove "_static" suffix from libsparseAlex Deymo2017-01-111-1/+1
| | | | | | Bug: 34220783 Change-Id: I358f931f0b29f5bd526e1475180e477e2e90b936
* Remove "_static" suffix from libext4_utils.Alex Deymo2017-01-111-1/+1
| | | | | Bug: 34220783 Change-Id: I34ccc3b11da0d1b48805967ad75b9ddade569930
* Merge "Add tests for imgdiff."Tao Bao2016-12-281-0/+29
|\
| * Add tests for imgdiff.Tao Bao2016-12-201-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | Factor out libimgdiff static library for testing purpose. This CL adds the imgdiff tests on host and on target both (similar to libimgpatch). In practice, we only need imgdiff binary on host, and libimgpatch on target. But they should build and pass tests on both platforms. Test: recovery_host_test passes; recovery_component_test passes. Change-Id: I0eafb7faf727cdf70066310e845af6ee245d4f60
* | tests: Add test coverage for DirUtil.Tao Bao2016-12-221-0/+1
| | | | | | | | | | Test: recovery_unit_test passes. Change-Id: I764c56404c7ccdd57ae5486c946fbc9ac6ae7bc9
* | tests: Add testcase for ZipUtil.Tao Bao2016-12-221-1/+2
|/ | | | | Test: recovery_unit_test passes. Change-Id: I8ad364e88aaee31579ed7206aad8e5620518d797
* tests: Add tests for bootloader_message.Tao Bao2016-12-151-0/+1
| | | | | Test: recovery_component_test passes. Change-Id: Ib9aa2ffd6b018546223c76b7424f4ba355f5b088
* Add tests for setup-bcb and clear-bcb via uncrypt.Tao Bao2016-12-141-0/+2
| | | | | | | | | | Bug: http://b/33534933 Test: recovery_component_test passes (and fails on buggy build due to the CL in [1]). [1]: commit 7e31f421a514da09b90e46dbd642a5e9b16e0003 Change-Id: I120498048ec1db8f9fcbb3cf135c05d3a48cfcdf
* updater: Refactor set_stage() and get_stage() functions.Tao Bao2016-11-181-0/+2
| | | | | | | | | | | Add read_bootloader_message_from() and write_bootloader_message_to() to allow specifying the BCB device (/misc). Also add testcases for set_stage() and get_stage(). Test: recovery_component_test passes. Test: Build a recovery image and apply a two-step OTA package. Change-Id: If5ab06a1aaaea168d2a9e5dd63c07c0a3190e4ae
* updater: Fix the wrong return value for package_extract_file().Tao Bao2016-11-151-0/+2
| | | | | | | | | | | | | | | 'bool success = ExtractEntryToFile()' gives opposite result. Fix the issue and add testcases. Change the one-argument version of package_extract_file() to explicitly abort for non-existent zip entry. Note that this is NOT changing the behavior. Prior to this CL, it aborts from Evaluate() function, by giving a general cause code. Now it returns kPackageExtractFileFailure. BUg: 32903624 Test: recovery_component_test works. Change-Id: I7a273e9c0d9aaaf8c472b2c778f7b8d90362c24f
* Move recovery_test.cpp out of unit testTianjie Xu2016-11-081-1/+12
| | | | | | | | Move recovery-refresh/persist tests out because these tests need special steps to run. Also switch the constants to std::string. Test: recovery_manual_test passed on an A/B device Change-Id: I60b3ec6f094044945c3aafc1fae540896a6ddea6
* otautil: Clean up SysUtil.cpp.Tao Bao2016-11-071-6/+7
| | | | | | | | | | Add unit testcases for sysMapFile(). Test: recovery_unit_test passes. Test: Build and use the new recovery image to sideload a package. Test: Build and use the new recovery image to install an update. Change-Id: I77d8f1ea151ab513865d992c256ba93a1fcb51a4
* tests: Set up testdata path for continuous native tests.Tao Bao2016-11-031-9/+12
| | | | | | | | | | | | | | | | | | | | continuous_native_tests expects the testdata under DATA/ in continuous_native_tests.zip. This CL packs a copy of the testdata into continuous_native_tests.zip as DATA/nativetest/recovery/testdata (via LOCAL_PICKUP_FILES). This CL also removes the extra copy for nativetest64. Testdata will always stay at /data/nativetest/recovery/testdata, even for 64-bit version. Otherwise we will unnecessarily get four copies (two for data/ and another two for DATA/). Bug: 32123241 Test: mmma bootable/recovery && adb sync data. On bullhead, /data/nativetest/recovery_component_test/recovery_component_test works; /data/nativetest64/recovery_component_test/recovery_component_test works. Test: m continuous_native_test; DATA/nativetest/recovery/testdata exists. Change-Id: Ifefa0309de7af23c77654e8e450848ca2da218c2
* applypatch: Add testcases for applypatch executable.Tao Bao2016-11-011-1/+2
| | | | | | | | | | | | | | | Refactor applypatch/main.cpp into libapplypatch_modes so that we can add testcases. Some changes to applypatch/main.cpp: - Replace char** argv with const char**; - Use android::base::Split() to split ":"; - Use android::base::ParseUInt(). Bug: 32383590 Test: Unit tests pass, install-recovery.sh works. Change-Id: I44e7bfa5ab717d439ea1d0ee9ddb7b2c40bb95a4
* tests: Generate testdata for 2nd arch.Tao Bao2016-10-261-1/+12
| | | | | | | | | | | | | | We currently only copy the testdata to $(TARGET_OUT_DATA_NATIVE_TESTS)/recovery, which fails the tests generated for 2nd arch (TARGET_2ND_ARCH). For example, on angler /data/nativetest/recovery_component_test/recovery_component_test fails due to missing testdata. Bug: 32123241 Test: Both of /data/nativetest/recovery... and /data/nativetest64/recovery... work on angler. Change-Id: Ib76264b4408d01c08b2619c8ac84b2476ea5a8bc
* Replace minzip with libziparchiveTianjie Xu2016-10-181-2/+9
| | | | | | | | | | | Clean up the duplicated codes that handle the zip files in bootable/recovery; and rename the library of the remaining utility functions to libotautil. Test: Update package installed successfully on angler. Bug: 19472796 Change-Id: Iea8962fcf3004473cb0322b6bb3a9ea3ca7f679e
* Refactor libupdater into a seperate module.Tao Bao2016-10-111-6/+22
| | | | | | | | | So that we can write native tests for updater functions. This CL adds a testcase for getprop() function. Test: mmma bootable/recovery; Run recovery_component_test on device. Change-Id: Iff4c1ff63c5c71aded2f9686fed6b71cc298c228
* edify: Move the testcases to gtest.Tao Bao2016-10-041-0/+2
| | | | | | | | | | | | | Now they live in tests/component/edify_test.cpp. Also rename edify/main.cpp to edify/edify_parser.cpp. It becomes a host-side debugging tool that validates the input edify script. However, it supports edify builtin functions only and doesn't recognize the ones defined via updater. Test: recovery_component_test passes on device. Change-Id: Ib94a787bf15098a9cc078d256b6a6dc96ff12b2e
* Turn on -Werror for recoveryTianjie Xu2016-09-301-1/+2
| | | | | | | | | | Also remove the 0xff comparison when validating the bootloader message fields. As the fields won't be erased to 0xff after we remove the MTD support. Bug: 28202046 Test: The recovery folder compiles for aosp_x86-eng Change-Id: Ibb30ea1b2b28676fb08c7e92a1e5f7b6ef3247ab
* Switch recovery to libbase loggingTianjie Xu2016-09-011-2/+3
| | | | | | | | Clean up the recovery image and switch to libbase logging. Bug: 28191554 Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35 Merged-In: Icd999c3cc832f0639f204b5c36cea8afe303ad35
* Merge "Fix references to libcrypto_utils_static."Josh Gao2016-08-081-2/+2
|\ | | | | | | | | | | am: b97da5e0f0 Change-Id: Ia935df84e5ea36dfc6605b41872c36db69a114a0
| * Fix references to libcrypto_utils_static.Josh Gao2016-08-061-2/+2
| | | | | | | | | | Bug: http://b/30708454 Change-Id: I7a5048beff1d8b783a9683dcb4a79606a77f20ee
* | tests: Remove obsolete MTD support.Tao Bao2016-06-161-1/+0
| | | | | | | | | | | | | | | | Track the change in commit 63a319201fc0f5c34c1c62b446527e06f57f8d40 and fix builds. Bug: http://b/29250988 Change-Id: Iad5be953e102020931649629afc980d585ed2931
* | Merge "Fix matches_locale function" into nyc-devTianjie Xu2016-04-211-1/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | am: 8b86373 * commit '8b86373fd954276b18a6fba81afbe42c9caa49d3': Fix matches_locale function Change-Id: If7726c2f381ba0e4ab0519b77c167e75a9d46104
| * | Fix matches_locale functionTianjie Xu2016-04-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | matches_locale was expecting input locale string to have at most one underscore; as a result "zh_CN_#Hans" ignores "zh_CN" and matches into "zh". Fix the match function and add unit tests. Bug: 27837319 Change-Id: I4e8a66f91cae6ac2a46b6bf21f670d5ea564c7c8
| * | Use BoringSSL instead of mincrypt to speed up package verification.Elliott Hughes2016-04-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the verification code in bootable/recovery to use BoringSSL instead of mincrypt. Cherry-pick of 452df6d99c81c4eeee3d2c7b2171901e8b7bc54a, with merge conflict resolution, extra logging in verifier.cpp, and an increase in the hash chunk size from 4KiB to 1MiB. Bug: http://b/28135231 Change-Id: I1ed7efd52223dd6f6a4629cad187cbc383d5aa84
| * | recovery: use __android_log_pmsg_file_write for log filesMark Salyzyn2016-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (cherry-pick from commit a4f701af93a5a739f34823cde0c493dfbc63537a) - Add call to __android_log_pmsg_file_write for recovery logging. - Add call to refresh pmsg if we reboot back into recovery and then allow overwrite of those logs. - Add a new one-time executable recovery-refresh that refreshes pmsg in post-fs phase of init. We rely on pmsg eventually scrolling off to age the content after recovery-persist has done its job. - Add a new one-time executable recovery-persist that transfers from pmsg to /data/misc/recovery/ directory if /cache is not mounted in post-fs-data phase of init. - Build and appropriately trigger the above two as required if BOARD_CACHEIMAGE_PARTITION_SIZE is undefined. - Add some simple unit tests NB: Test failure is expected on systems that do not deliver either the recovery-persist or recovery-refresh executables, e.g. systems with /cache. Tests also require a timely reboot sequence of test to truly verify, tests provide guidance on stderr to direct. Bug: 27176738 Change-Id: I17bb95980234984f6b2087fd5941b0a3126b706b
* | | resolve merge conflicts of 2bf95ac to nyc-dev-plus-aospElliott Hughes2016-04-131-1/+1
|\ \ \ | | |/ | |/| | | | Change-Id: Iaf232fbe65879bad6e19c7a9600aa6303a491a67
| * | Convert recovery to use BoringSSL instead of mincrypt.Mattias Nissler2016-04-061-1/+2
| | | | | | | | | | | | | | | | | | | | | This changes the verification code in bootable/recovery to use BoringSSL instead of mincrypt. Change-Id: I37b37d84b22e81c32ac180cd1240c02150ddf3a7
* | | Merge "recovery: use __android_log_pmsg_file_write for log files" am: 75da771Mark Salyzyn2016-03-311-0/+2
|\| | | |/ |/| | | | | | | | | | | | | am: 6f83130 * commit '6f83130d7acd85df89a80e691d3aa63bd2ceda39': recovery: use __android_log_pmsg_file_write for log files Change-Id: Id2e7a76bae8eb061f6f57249dd912f25cd6332c6
| * recovery: use __android_log_pmsg_file_write for log filesMark Salyzyn2016-03-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add call to __android_log_pmsg_file_write for recovery logging. - Add call to refresh pmsg if we reboot back into recovery and then allow overwrite of those logs. - Add a new one-time executable recovery-refresh that refreshes pmsg in post-fs phase of init. We rely on pmsg eventually scrolling off to age the content after recovery-persist has done its job. - Add a new one-time executable recovery-persist that transfers from pmsg to /data/misc/recovery/ directory if /cache is not mounted in post-fs-data phase of init. - Build and appropriately trigger the above two as required if BOARD_CACHEIMAGE_PARTITION_SIZE is undefined. - Add some simple unit tests NB: Test failure is expected on systems that do not deliver either the recovery-persist or recovery-refresh executables, e.g. systems with /cache. Tests also require a timely reboot sequence of test to truly verify, tests provide guidance on stderr to direct. Bug: 27176738 Change-Id: I17bb95980234984f6b2087fd5941b0a3126b706b
| * Change on-device directory for recovery test dataJed Estep2016-02-051-1/+1
| | | | | | | | | | | | Test data needs to go outside the gtest module. Change-Id: Ic444ca838cbafa651ec97ff8730129da84fafc09
* | Port applypatch.sh tests to recovery_component_testsJed Estep2016-03-121-2/+11
|/ | | | | Bug: 27135282 Change-Id: If53682b591397ddfdb84860a3779b612904d4489
* Refactor existing tests to use gtestJed Estep2016-02-041-3/+32
| | | | | Bug: 26962907 Change-Id: I5f80636af1740badeff7d08193f08e23f4e4fee1
* recovery: Switch to clangTao Bao2015-06-031-0/+1
| | | | | | And a few trival fixes to suppress warnings. Change-Id: I38734b5f4434643e85feab25f4807b46a45d8d65
* More test makefile cleanup.Dan Albert2014-10-171-24/+23
| | | | | | | Global variables kill. No need to manually link gtest, and that causes problems with libc++. Change-Id: If804cdd436cf1addfa9a777708efbc37c27770b6
* Add support for ECDSA signaturesKenny Root2013-10-101-0/+26
This adds support for key version 5 which is an EC key using the NIST P-256 curve parameters. OTAs may be signed with these keys using the ECDSA signature algorithm with SHA-256. Change-Id: Id88672a3deb70681c78d5ea0d739e10f839e4567
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 17:59:48 +0100